Trabajos equipment technician en Rahway, New JerseyCrear alertas

Job Title: Cat Scan Technician Location: RWJUH Rahway Hospital Department Name: Cat Scan Req #: 0000256772 Status: Hourly Shift: Night Pay Range: $49.09 - $58.14 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Cat Scan Technician At RWJBarnabas Health, the Cat Scan Technician plays a critical role in patient care and diagnostics. Operating under the supervision of a board-certified radiologist, they work with a high level of independence. They are responsible for preparing patients, administering contrast dye, ensuring radiation safety, and delivering high-quality diagnostic images. A typical day for a Cat Scan Technician may include: • Analyzes patient physical condition, age and suspected pathology for proper technique, • Assists Radiologist in performing certain radiographic procedures, • Correctly marks images with time and body position, • Ensures patient comfort, physical and mental well being during the examination, • Ensures that room is properly stocked with all needed supplies prior to the beginning of the procedure, • Explains procedures, keeps patient informed of progress and assists patients in transferring on to/off examination table for procedures, • Observes equipment for proper functioning and reports malfunctions to supervisor, • Properly prepares room before patient enters and cleans it after patient exits, • Properly uses the Radiology Information System to arrive, change if necessary and complete cases, • Uses an understanding of the principles of growth and development to assess each patients age specific needs and provide age specific treatment and care This role might be for you if: • Clear, compassionate communication defines how you interact with patients, families, and colleagues, • Attention to detail and technical precision guide your work every day, • You remain calm and adaptable while managing a fast-paced clinical environment, • Patient safety and delivering high-quality diagnostic imaging are your top priorities, • You enjoy working collaboratively with providers and interdisciplinary care teams, • Continuous learning and professional growth motivate you, • Creating a positive, reassuring patient experience is central to your approach To be considered for this Cat Scan Technician opportunity: • Graduate of an AMA approved School of Radiologic Technology., • Registered by the American Registry of Radiologic Technology., • CT Certification, • NJ License required., • Previous CT experience required., • Maintains required BLS Heart Saver/Health Care Provider through American Heart Association, • Available for full-time Night Shift schedule, working 4x10 hour shifts from 10P-8A

Job Title: OR Surgical Technician Location: RWJUH Rahway Hospital Department Name: Operating Room Req #: 0000254148 Status: Hourly Shift: Evening Pay Range: $35.05 - $42.97 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Operating Room Surgical Technician – RWJBarnabas Health Position Overview At RWJBarnabas Health, Surgical Technicians become part of a highly collaborative perioperative team where precision, teamwork, and patient-centered care support exceptional surgical outcomes. This Surgical Technician role offers opportunities for professional growth, advanced clinical experience, and a culture committed to safety, innovation, and continuous improvement. As a Surgical Technician, you will play an essential role in preparing the operating room, supporting surgeons and perioperative nurses during procedures, and helping ensure every patient receives safe, efficient, and high-quality surgical care. Joining RWJBarnabas Health means joining a community where every Surgical Technician is encouraged to grow, contribute, and make a meaningful impact. A Typical Day for a Surgical Technician May Include: • Preparing operating rooms by ensuring surgical instruments, equipment, and sterile supplies are organized, available, and ready for scheduled procedures., • Collaborating with the perioperative registered nurse to provide individualized, age-appropriate care for patients throughout the surgical experience., • Maintaining a sterile field and adhering to infection prevention, aseptic technique, and organizational policies to promote safe surgical outcomes., • Anticipating the surgeon’s instrumentation and equipment needs during procedures while responding efficiently to changes in surgical conditions., • Assisting the surgical team during routine and complex procedures by handling instruments, supplies, and equipment with precision and attention to detail., • Monitoring the surgical environment to help ensure patients' physiologic responses remain appropriate throughout the perioperative experience., • Supporting a safe operating room environment by following established risk reduction practices, including fire prevention protocols and safety procedures related to laser and electrosurgical equipment., • Reporting identified safety issues such as hazardous environments (e.g., damaged floors, walls, ceiling tiles, unsecured areas) and medical errors., • Collaborating closely with surgeons, anesthesia providers, registered nurses, and other members of the perioperative team to deliver coordinated, patient-centered care., • Communicating effectively and collaborating with physicians and other patient care providers to consistently set and evaluate priorities through appropriate interventions with measurable outcomes toward improvement., • Utilizing the nursing process as an interdisciplinary team member to integrate all aspects of the provision of care and individualize the plan of care to address specific patient needs., • Maintaining accurate preparation, organization, and turnover of surgical equipment to promote efficient workflow and readiness between procedures., • Participating in departmental education, orientation, competency validation, and quality improvement initiatives that support ongoing clinical excellence., • Managing patient care delegation responsibly and accountably when delegating tasks to other members of the healthcare team., • Performing other essential duties as required. This Role Might Be For You If: • You thrive in a fast-paced surgical environment where organization and attention to detail are essential., • You remain calm, adaptable, and focused during complex or changing surgical procedures., • Strong teamwork and communication skills help you collaborate effectively with surgeons, nurses, anesthesia providers, and other perioperative professionals., • You anticipate the needs of the surgical team and take pride in supporting efficient, high-quality surgical care., • Patient safety, sterile technique, and quality outcomes guide your daily work., • You value accountability, professionalism, and continuous learning in your clinical practice while assuming responsibility for your own professional advancement., • You enjoy contributing to a collaborative culture focused on delivering exceptional patient care., • You possess a comprehensive knowledge of the patient population served. Job Qualifications & Requirements Education, Training, & Licensure: • Program Completion: Successful completion of an accredited ARC/ASTA or nationally/regionally accredited Surgical Technology program, including appropriate documented clinical hours., • Professional Standards: Ability to deliver care within the scope of practice defined by the ASC/AST and regulatory standards, maintaining a strict realization of your individual level of knowledge and experience. Certifications: • Surgical Tech Certification: Must hold and maintain a Certified Surgical Technologist (CST) credential through the National Board of Surgical Technology and Surgical Assisting (NBSTSA) or another nationally recognized credentialing organization., • Life Support Certification: Current American Heart Association Basic Life Support (BLS) / CPR certification is required. Experience: • Previous experience in a surgical setting is preferred.

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off, • 401(k) matching, • Free uniforms, • Training & development Job Summary We are looking for a skilled Mechanic to join our busy repair shop. As a Semi-Trailer Mechanic, you will assist our customers by diagnosing and repairing issues with vehicles’ performance and function as well as performing Federal inspections. As a Semi-Trailer Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment, preparing cost estimates, and maintaining a welcoming environment. The ideal candidate should be skilled in communicating with supervisors, management and customers and able to explain vehicle issues clearly and concisely and provide valuable advice. This is a non-exempt position. Regular work week is 40 hours, with mandatory overtime of 2 hours daily (time-and-a-half) required (work hours are 7:00 am - 5:00 pm) Responsibilities • Diagnose and repair vehicles coming into the shop, • Carry out routine vehicle maintenance tasks such as tire replacement, suspension repairs, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including suspension, brakes and cargo tank items, • Maintain accurate repair shop records and paperwork, • Ensure a high level of customer satisfaction and repeat business, • Move and park trailers within on-site truck yard (training will be provided if necessary) Qualifications • High school diploma or GED is required, • Associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Prior Cargo Tank / Semi-Trailer experience is preferred, • Strong customer service and communication skills are required, • Able to meet the physical requirements of the role, including heavy lifting

Job Description Are you an aspiring Diesel Mechanic? Start your career with A. Duie Pyle! As a Diesel Technician Apprentice, you will participate in a training program designed to build the skills and knowledge needed for a successful career in diesel maintenance. Working alongside experience technicians. you will receive structured training, personalized mentorship, and hands-one experience service Pyle's fleet. Upon successful completion of the program, you will advance to a Diesel Technician role, performing preventive maintenance and repairs on our trucks and trailers. Why Pyle? • Pay Rate: $24.00 per hour, • Shift differential when working 2nd & 3rd shifts, • Weekly pay, via direct deposit, • Tuition Reimbursement, • Company-funded Tool Reimbursement Program, • Modern, well-maintained shops with new equipment, • Paid vacation, PTO, and annual holidays, • Medical, Dental, Vision and Life Insurance, • 401(k) with Company Match; Annual Profit Sharing (100% employer paid), • Short Term and Long Term Disability, • Wellness Programs for yearly benefits discount Simply put, Pyle People Deliver. Since 1924, A. Duie Pyle has been family-owned and operated. Built by our core values of integrity, service first, and empathy, we’re dedicated to exceptional customer service and empowering our employee’s success. If you’re ready to build a career with a company that continues to lead the supply chain and logistics industries, we’d love to hear from you. The responsibilities of the position include, but are not limited to: • Performing routine preventative maintenance and general repairs on Class 8 trucks, • Troubleshooting and repairing brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required To be qualified for this position, you must possess the following: • A recent graduate or active student currently enrolled in a post-secondary program of study in Diesel Technology and or are a recent graduate, • Your own a set of basic tools, • Willingness to learn and grow your abilities, • Ability to work all three shifts, as needed Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Imagine the student you’ll help launch Picture a learner who walks into our Union, NJ lab unsure how to trace an electrical fault—and leaves confidently diagnosing systems and passing certification exams. As an HVAC Education Coach at Lincoln Tech, you make that transformation possible. And yes, you’ll enjoy three-day weekends every week. Your coaching playbook • Guide students through an accredited HVAC curriculum—making complex concepts accessible and practical., • Run hands-on labs using industry-standard equipment in a climate-controlled facility., • Create an engaging, supportive environment where curiosity and persistence are rewarded., • Measure progress, document results, and offer targeted, constructive feedback., • Refresh lessons with current tools, technologies, and best practices from the field., • Collaborate with faculty to refine delivery and elevate program effectiveness., • Prepare learners for certifications and long-term career success. What sets you up to succeed, • At least 3 years as an HVAC technician., • High school diploma or GED., • Excellent communication and people skills., • Drive to motivate and engage students from all backgrounds., • Real enthusiasm for teaching and mentorship. Pick the schedule that fits, • Part-time Evening: Monday – Thursday, 6:15 PM – 10:30 PM, • Part-time Weekend: Friday – Sunday, 8:00 AM – 4:00 PM What you’ll enjoy, • Well-equipped labs with the tools pros use., • Eight decades of institutional stability and proven Skilled Trades outcomes., • Professional development, advancement pathways, and continuous training resources., • Comfortable, climate-controlled environment., • Bargaining Benefits: Health, Welfare, and Retirement plans, plus Paid Holidays and PTO., • Good work/life balance and real career growth opportunities. Who we are For 80 years, Lincoln Tech has prepared students for in-demand careers across Healthcare, Automotive/Diesel, Skilled Trades, and Information Technology through immersive, skills-first education. Statement of Equal Opportunity Lincoln Tech is an Equal Opportunity Employer. Let’s connect • Email: careers@lincolntech.edu, • Website: www.lincolntech.edu/careers, • Upon meeting the criteria and payable under the terms of Lincoln Tech's Employee Sign-on Bonus Agreement. Staffing agency candidates are not eligible for Sign-on Bonuses offered at Lincoln Tech. 2-21632 — Instructor/HVAC-22037

Job Description Overview Diesel Technician/Mechanic – Keasbey, NJ $32.00 - $36.00 hr | Weekly Pay | Full Benefits within 30 Days | Potential Bonus up to $5,000.00 Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Diesel Technician/Mechanic to join our team in Keasbey, NJ If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $32.00 – $36.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Sunday - Thursday 3 pm - 11:30 pm Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on medium to heavy duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 5+ years’ of hands-on experience performing diesel vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile and or shop environment that may include exposure to dust, diesel fumes, noise, and mechanical irritants such as oils and greases. Technicians must be able to perform essential functions that include lifting heavy objects, accessing tight spaces, and bending, stooping, crouching, or crawling as needed to complete repairs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #DieselMechanic #NowHiring #DieselTechnicianCareer #MechanicJobs #DieselTechnician

Job Description Diesel Technician – Ford Power Stroke Company: Maplecrest Ford Lincoln of Union Location: Union, NJ Employment Type: Full-Time Compensation: $40 – $50+ per hour (Based on Experience & Certifications) + Performance Bonuses About Maplecrest Maplecrest Ford Lincoln is a high-volume, customer-focused dealership with a strong reputation for service excellence. We are growing and looking to add a skilled Diesel Technician to our award-winning service team. If you are experienced with Ford Power Stroke engines and want consistent work, modern equipment, and top pay, we want to speak with you. What You’ll Do Diagnose and repair Ford Power Stroke diesel engines Perform engine repairs, fuel system service, turbocharger replacements, and emissions/aftertreatment repairs Complete warranty repairs following Ford factory standards Conduct multipoint inspections and document findings Perform routine maintenance and advanced drivability diagnostics Collaborate with service advisors and other technicians What We’re Looking For 2+ years of diesel repair experience (Ford experience preferred) Strong electrical and drivability diagnostic skills Experience with Ford IDS/FDRS diagnostic systems (preferred) ASE certifications (a plus) Valid driver’s license Strong work ethic and team mindset Why Join Maplecrest? Top-tier pay plan Bonus opportunities Consistent workflow Paid Ford factory training & certification advancement Medical, Dental, Vision Insurance 401(k) Paid Time Off Career growth within a respected dealership group Modern, well-equipped service facility Apply Today If you're ready to take your diesel career to the next level with a dealership that values its technicians, apply now. Equal Employment Opportunity Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR 8MIoyuVBDR

Job Description Allegiance Isuzu Trucks of Mountainside, New Jersey is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description Taylor Northeast is the mid-Atlantic and New England’s premier dealer of forklifts, container handlers, railcar movers, industrial floor cleaning machines, and much more. Headquartered near Reading, Pennsylvania with multiple branch facilities from Baltimore to New Hampshire, we sell, rent, service, and rebuild a range of custom and heavy-duty material handling equipment that is unlike any other company in the industry. And we are fortunate to have an equipment lineup that is backed by the best service technicians and parts support teams in the Northeast. We are seeking an experienced Field Technician - Mechanic for Central New Jersey area to service various types of forklifts. The ability to work, think and operate independently is a must. RESPONSIBILITIES: • Inspect, diagnose and service heavy lift equipment (diesel, electric or LP fueled) to diagnose technical problems, • Determine required repairs, • Maintain equipment service records, • Conduct regular preventative maintenance tasks on-site at customers' locations, • Test mechanical equipment after repair or assembly to guarantee proper performance and compliance with the manufacturers' specifications REQUIREMENTS: • Hydraulic experience necessary, • Diesel experience necessary, • Strong electrical aptitude necessary, • Must have clean, safe driving record, • Prior mechanical and technical experience on large mobile equipment preferred, • Applicant must be able to pass a pre-employment drug test, physical exam and background check BENEFITS • Competitive salary commensurate with experience, • 401(k) with company match, • Health insurance (majority paid by company), • Dental insurance, • Vision insurance, • Life insurance, • Employee Referral program, • Weekly pay schedule ABOUT US Taylor Northeast is proud to be a flagship member of the Forged Industrial Group, a fast-growing network of four operating companies that employs hundreds of experts at businesses located throughout the US. Our companies’ primary specialties include full-service, cradle-to-grave coverage of heavy-duty and customized material handling equipment. From the nation’s busiest ports, to its largest mills, to its biggest infrastructure projects, you’ll find our equipment wherever you find materials on the move. Learn more about the power of our teams at taylornortheast.com. We are an equal opportunity employer. Powered by JazzHR QgwAF1EZOD

Job Description We are looking for a talented Diesel Technician to join our growing Fleet Maintenance Department at our Carteret, NJ shop. Why Pyle? • Pay Rate: $30.00 - $45.00 per hour based upon experience and skillset, • $5.00 per hour shift differential, • Weekly pay, via direct deposit; annual benefits and paid time off, • 11:00 PM start time, Sunday through Thursday, • Overtime pay after 40 hours, • New, modern equipment to work on in clean shops, • Company-funded Tool Reimbursement Program Simply put, when it comes to getting the job done, Pyle People Deliver. A family-owned and operated business since 1924, Pyle believes in providing you with the resources and stability to succeed. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Your main responsibilities will include, but are not limited to: • Performing routine preventative maintenance and repairs to heavy duty trucks, • Troubleshooting and performing repairs to brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required Your Benefits will include: • Medical, Dental, Vision, and Life Insurance, • 8 paid annual holidays – in addition to vacation and personal time off, • 401(k) with company match, • Paid Weekly via Direct Deposit, • Paid Vacation and Personal Time, • Annual Tool Allowance Program, • Annual, continual training, • Uniforms Provided To be successful in this role you will need to have the following: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for a heavy duty truck technician, • Vocational or Technical Training in diesel or heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Ability to work independently with a “can-do” attitude Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 A Duie Pyle is the Northeast’s premier integrated supply chain solutions provider ideally equipped in servicing the congested Northeast metropolitan region. Family-owned since 1924, A. Duie Pyle provides engineered logistics solutions and consultative services utilizing our vast network of LTL Service Centers, strategically located warehouses, Dedicated fleet operations and specialized Truckload services through Pyle Logistics. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Family owed Medium-Heavy Duty Truck Repair Company currently seeking a Class A or B Diesel Technician to become an integral part of our team! You will diagnose and repair Medium and Heavy Duty Diesel engine vehicles of all makes and models and their systems. If you are seeking a career in an organization that offers growth and treats people with respect, Apply today! Responsibilities: • Diagnose and repair various makes/models of diesel engines and transmissions as well as chassis and body control systems, • Perform routine vehicle inspections and maintenance, • Inspect and test vehicles for necessary adjustments, • Help other technicians with jobs as needed, • Diagnosis and repair of all vehicle electrical systems Qualifications: • Minimum 10 year previous experience as a diesel technician, • Knowledge of diagnostic software and equipment, • Knowledge of Diesel engine vehicle and components, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • A valid driver's license with clean driving record. CDL is a Plus!, • Excellent people skills and a professional appearance, • Excellent organizational and time management skills, • A sense of urgency is an absolute essential! Benefits: • Competitive Base Salary w/ Monthly Bonuses, • Comprehensive Health Benefits including Dental Coverage, • Company-paid Life Insurance Coverage, • Paid Holidays and Vacation Program, • 401K Plan, • Growth and Career Opportunities, • Paid Training E04JI800jf5d409564d

Job Description Fraza & Vitan Equipment is seeking a skilled Forklift Technician to troubleshoot and repair heavy-duty material handling equipment. This is a fast-paced, field-based position where you'll use your diagnostic expertise across mechanical, electrical, and hydraulic systems to keep our customers' operations moving. Why you’ll love it here: • Pay $21/hr to $38/hr based on experience, • Sign-on bonus, • Hourly pay based on experience, • Company vehicle provided (Take-home service truck), • No weekends & flexible daily field scheduling (first shift), • Full benefits package: PTO, medical, dental, vision, & retirement, • Commission opportunities for service work and upselling parts/equipmentWhat you’ll do:, • Troubleshoot and repair complex mechanical, electrical, and hydraulic systems, • Perform preventative maintenance and emergency repairs to minimize customer downtime, • Hit the road to various customer sites—every day brings a different machine and a new challenge, • Ensure all equipment is safe, compliant, and up to solid operating standards, • Log your service work accurately and communicate clearly with the branch dispatch team What you’ll need: • 2+ years of hands-on experience repairing forklifts or heavy equipment (electric, propane, and diesel), • Strong diagnostic instincts and a safety-first mindset on the job, • Valid driver’s license and a clean driving record for the company truck Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career—apply today! Powered by JazzHR UMjRsAhyau

Job DescriptionLocation: Union, NJ 07083 Date Posted: 07/01/2026 Category: Center Based Education: High School Diploma/GED Great Compensation $20/hr, Benefits, PTO and potential for career growth! Join us in Creating a Colorful Beginning! At KFSABA we value innovation, creativity, and the power of applied behavior analysis therapy for children with autism. Position DescriptionWe are seeking compassionate people to work as Behavioral Technicians (BTs), and Registered Behavior Technicians (RBTs) to provide direct treatment and ABA therapy. Under the supervision of a BCBA clinician, the BT is responsible for working one-on-one with children carrying out their individualized treatment plans. Key Benefits and Advantages (Based on schedule) > Highly competitive compensation based on your education and experience> Medical, Dental, and Vision Insurance> Disability and Life Insurance, 401k, and other voluntary benefits> 8 Paid Holidays + 16 PTO Days (6 sick, 10 vacation) > 401K match > Weekly Pay> Work with a committed agency with over a 20-year track record of service> 40-hour RBT course providedFacility and Hours> Center-based opportunities> Various schedules availableRequired Experience and Education> Minimum of a HS Diploma or GED> Minimum of 6 months to 1 year of experience with children (ABA preferred)> Ability to work independently as well as in a team environment> It is an essential function to be able to meet the rigorous demands of the job, which may include: long periods of standing, sitting, following, pushing/pulling equipment, lifting, bending, kneeling, crouching, crawling, and engaging with children on the floor or standing for long periods. About UsKaleidoscope ABA has been in business for over 20 years and has 29 locations across the country. Join a growing team looking to make a difference in the lives of children! Kaleidoscope ABA Therapy Services is an equal opportunity employer. Title: Behavioral Technician Class: Behavioral Therapist Type: TEMPORARY Ref. No.: 1290698-22 BC: #KFS204 Company: Kaleidoscope ABA Contract Contact: Union Careers Office Email: Recruit@kfsaba.org Office Phone: 877-ABA-0399 Office Address: 2780 Morris Avenue, Union, NJ About Us: Responding to this post or registering on the KFSABA.org website is for information transfer only and is not an application, employment offer or commitment. When and if opportunities are presented, you may accept or decline such opportunities at your sole discretion. Further steps are required to complete your registration with the Kaleidoscope Family Solutions ABA, Inc. dba Kaleidoscope ABA. We appreciate your interest in our agency and look forward to meeting with you.

Job DescriptionBehavior Technician: At Kaleidoscope ABA, we know great teams start with great people – join us to make a meaningful impact every day, in an environment where you’ll feel valued and inspired. Why Choose Us? • Work-Life Balance - Your wellbeing matters. You’ll enjoy a consistent schedule with no late nights or weekends!, • Competitive Pay - We value your skills and dedication. We offer pay that reflects your expertise and commitment to making a difference in the lives of others., • Bonus Opportunities - Each month, earn up to $1.50/hr in additional incentive for all hours worked., • Comprehensive Benefits – We’re committed to supporting your whole-self – from health-insurance to retirement plans, our benefits are designed to support your present needs and future goals., • Time Off That Matters – We believe in a full-recharge. With generous PTO and holiday allowances, Kaleidoscope ABA ensures you have the time to balance life outside of work., • Supportive Environment – Your growth is our priority. We invest in clear pathways for professional development, so you can grow within a supportive and compassionate community. What You'll Do: As a Behavior Technician with Kaleidoscope ABA, you’ll receive comprehensive training to provide essential support for children with autism, helping them build skills for everyday life. No prior experience in ABA is required—just a passion for helping children succeed. You’ll work under the guidance of a BCBA to implement treatment plans, encourage positive behaviors, and collect data on each child’s progress. With Kaleidoscope ABA, you’ll find a supportive team, meaningful work, and opportunities for growth. What We're Looking For: • HS Diploma or GED., • Experience working with children in settings such as daycare, child care, pre-k and as teachers’ assistants or paraprofessionals within a school-environment., • The ability to learn new concepts quickly - Strong communication skills to connect with children and families - A passion for making a positive impact in children's lives., • It is an essential function to be able to meet the rigorous demands of the job, which may include long periods of standing, sitting, following, pushing/pulling equipment, and/or lifting up to 50 lbs. Empower change. Grow with purpose. Build a future that matters. Apply now and start making a difference. Kaleidoscope Family Solutions ABA, Inc. is an equal opportunity employer committed to diversity and inclusion in the workplace.

Job DescriptionLocation: Union, NJ 07083 Date Posted: 06/01/2026 Category: Center Based Education: High School Diploma/GED Great Compensation $20/hr, Benefits, PTO and potential for career growth! Join us in Creating a Colorful Beginning! At KFSABA we value innovation, creativity, and the power of applied behavior analysis therapy for children with autism. Position DescriptionWe are seeking compassionate people to work as Behavioral Technicians (BTs), and Registered Behavior Technicians (RBTs) to provide direct treatment and ABA therapy. Under the supervision of a BCBA clinician, the BT is responsible for working one-on-one with children carrying out their individualized treatment plans. Key Benefits and Advantages (Based on schedule) > Highly competitive compensation based on your education and experience> Medical, Dental, and Vision Insurance> Disability and Life Insurance, 401k, and other voluntary benefits> 8 Paid Holidays + 16 PTO Days (6 sick, 10 vacation) > 401K match > Weekly Pay> Work with a committed agency with over a 20-year track record of service> 40-hour RBT course providedFacility and Hours> Center-based opportunities> Various schedules availableRequired Experience and Education> Minimum of a HS Diploma or GED> Minimum of 6 months to 1 year of experience with children (ABA preferred)> Ability to work independently as well as in a team environment> It is an essential function to be able to meet the rigorous demands of the job, which may include: long periods of standing, sitting, following, pushing/pulling equipment, lifting, bending, kneeling, crouching, crawling, and engaging with children on the floor or standing for long periods. About UsKaleidoscope ABA has been in business for over 20 years and has 29 locations across the country. Join a growing team looking to make a difference in the lives of children! Kaleidoscope ABA Therapy Services is an equal opportunity employer. Title: Behavior Technician Class: Behavioral Therapist Type: PERMANENT ONLY Ref. No.: 1306272-7 BC: #KES303 Company: Kaleidoscope Education Solutions Contract Contact: Contract Submit NJ Office Email: BM@kesgroup.net Office Phone: 888-829-2477 Office Address: 1460 Route 9 North Suite 300, Woodbridge NJ 07095 About Us: Kaleidoscope Education Solutions is a referral agency for professionals seeking supplemental K12 education marketplace opportunities. Registering with Kaleidoscope Education Solutions is not a guarantee that opportunities will be available and/or located. All professionals contracting through Kaleidoscope Education Solutions are classified and compensated as self-employed independent contractors.

\n AMN Healthcare Allied is seeking a travel Mammography Technologist for a travel job in Union, New Jersey. Job Description & Requirements\n \n • Specialty: Mammography Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n Job Description & Requirements \n Mammography Tech - (Mam - Mammo Tech) \n StartDate: ASAP Available Shifts: 8 D Pay Rate: $1970.00 - $2030.00 \n Lead Mammography Tech job in Union, NJ lets you perform mammographic imaging, oversee technologist training, and ensure quality standards across multiple centers. You will work Monday through Friday, 8am to 4:30pm, and travel to other sites within the region to assess training and support needs. Responsibilities include collaborating with the Training Mammography Director, providing technologist and radiologist image reviews, and developing workflow efficiency standards. You must have ARRT(R) (M) certification, a State License in Diagnostic Radiologic Technology, BLS certification, at least 3 years of experience, and familiarity with RIS, imaging equipment, and PACS. Union, NJ offers a welcoming community, convenient access to New York City, and a variety of parks and dining options. AMN Healthcare provides excellent compensation, exclusive discounts and perks, dedicated recruiters, and the AMN Passport app for 24/7 support. Apply now to join this Lead Mammography Tech assignment in Union, NJ. \n Required Qualifications \n Mammography Technologist, Mammography \n Licenses: MAMMO-NJ \n Certifications: M-American Registry of Radiologic Technologists; BLS \n References: 1 Reference in entire work history \n Perm Position for LEAD MAMMOGRAPHER 3+ Years of Experience \n • Based out of Union, NJ, however there would be travel involved to other centers \n • Schedule is Monday-Friday 8am-4:30pm \n • Perform a variety of tasks involving the operation of mammographic equipment and other equipment/devices with adherence to established company policies and protocols. \n • Travel to other sites within the practice subsidiary to assess overall training and support needs for Mammography Technologists. \n • Works directly with the Training Mammography Director to ensure that, Mammography Technologists are onboarded and trained appropriately, and MQSA and ACR requirements, including quality assurance, clinical image quality, and quality control, are met throughout the region \n • Technologist Image Review – Provides routine and ad hoc Technologist feedback and review, consistent with department guidelines \n • Radiologist Image Review/Peer Review measures to certify that an image review exists for each Radiologist at each location where they read \n • Collaborates with technologists to develop efficiency standards for workflow that ensure each imaging center meets or exceeds productivity measures and daily volume expectations. \n • Demonstrates competency regarding the need to safeguard patient property and Patient Health Information. \n • Safeguards any on site medications in accordance with Company policies, procedures and any legal requirements. \n • Demonstrates respect for company property, including any cash and patient financial information on site or on patient portals. \n • Is responsive to the needs of others by exhibiting and maintaining professional behavior toward patients and coworkers. \n • Demonstrates respect for patient boundaries and cultural sensitivities during all interactions. \n • Demonstrates ability to interact diplomatically and sympathetically with patients, their families, and the public in a clinical setting. \n • Demonstrates ability to establish, nurture, and maintain cooperative working relationships \n • ARRT(R) (M) certification \n • State License in Diagnostic Radiologic Technology \n • Must have BLS certification \n • A familiarity with and ability to use equipment in assigned modality including RIS, imaging equipment and PACS. \n • A demonstrated the ability to maintain all required quality standards Job Benefits \n Allied travel assignments are typically for 13 weeks and offer generous packages that include: \n \n • Competitive pay rates\n, • Medical, Dental, Vision\n, • 401(k) and Flex Spending\n, • Life Insurance\n, • Accident and Short-term Disability Coverage\n, • Free Continuing Education\n, • Competitive Housing Deal\n, • Refer a friend and earn extra cash!\n \n \n About the Company\n \n At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable. \n \n \n mammography technician, mammography tech, mammogram technician, mammogram tech, mammography, mammographer, breast care, mammogram, allied health, allied\n \n AMN Healthcare Allied Job ID #3601548. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Mammography Tech - (Mam - Mammo Tech) About AMN Healthcare Allied\n \n AMN Healthcare is a leading force in the healthcare industry, committed to being the most trusted, innovative, and influential partner for healthcare organizations. With a focus on providing quality patient care, AMN Healthcare offers holistic solutions that reduce costs, streamline processes, and improve efficiencies. The company boasts over 30 years of experience and takes pride in staffing leading healthcare facilities with the nation's best travelers. As an industry leader, AMN Healthcare offers a diverse team dedicated to supporting healthcare workers and facilities, ensuring a personalized and supportive experience for both clients and candidates. \n \n Visit https://www.vivian.com/agencies/amn-healthcare-allied/ for more information. \n Benefits\n \n • Company provided housing options\n, • Medical benefits\n, • Dental benefits\n, • Continuing Education\n \n

\n Prime Staffing is seeking a travel Cath Lab Technologist for a travel job in Summit, New Jersey. Job Description & Requirements\n \n • Specialty: Cath Lab Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 11/23/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours\n, • Employment Type: Travel\n \n About the Position \n Specialty: Cath Lab Tech (Cardiac Catheterization Laboratory Technician) \n Experience: 1–2 years of Cath Lab or interventional radiology experience preferred \n License: Active State or Compact Radiologic Technologist License or ARRT Certification (if applicable) \n Certifications: BLS and ACLS required \n Must-Have: Strong knowledge of cardiovascular anatomy, sterile techniques, and interventional procedures \n Description: The Cath Lab Tech assists physicians during diagnostic and interventional cardiovascular procedures. Responsibilities include preparing and maintaining sterile fields, monitoring patient vitals, operating imaging equipment, and documenting procedures. The tech plays a key role in emergency cardiac care and recovery, often working in high-pressure, fast-paced environments. \n Requirements \n Required for Onboarding \n • ARRT or equivalent certification/license \n • BLS & ACLS Certifications \n Prime Staffing Job ID #38611010. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied / Tech:Cath Lab Tech,07:00:00-19:00:00 About Prime Staffing\n \n At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. \n We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives. \n \n \n \n

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin South Plainfield, New Jersey — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $33.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: Second Shift 11:00 pm – 7:00 am We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “South Plainfield” to 904-869-3454 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (9/29/2026 1:19 PM) Requisition ID 2026-211797 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $33.50/Hr. Max Pay USD $33.50/Hr.

Position Description Ryder is hiring a Senior Level Diesel Technician in South Plainfield, NJ— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T3 • Hourly Pay: $36.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday, • Hours: First Shift 11:00 pm – 7:00 am We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “South Plainfield” to904-869-3454to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 10 hours ago (11/13/2026 9:50 AM) Requisition ID 2026-215560 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees5 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $36.50/Hr. Max Pay USD $36.50/Hr.

Job Description Full job description Job Summary: We are seeking a skilled and motivated Gate Operator Technician for immediate hire to join our team with a minimum 3 years field experience . This role involves working outdoors in cold weather conditions to install, troubleshoot, and repair gate operator systems across various facilities. Candidates must be adept at diagnosing electrical and mechanical issues, with experience in industrial mechanics, hydraulics, electrical systems, and some welding. The position requires a self-starter attitude, the ability to work independently or with subcontractors, and owning tools is a plus. You will perform routine inspections, heavy lifting, and work outside in challenging weather conditions to ensure the safe and efficient operation of automated gate systems. We also due some prevailing wage work, which pays a higher rate We are located in Cranford , NJ and 95 % of our work is within 50 miles of 07016. Responsibilities: • Install, calibrate, and maintain gate operator systems, access controls, RFID systems, and related devices in outdoor environments., • Troubleshoot electrical and mechanical issues using schematics, wiring diagrams, and analysis skills., • Diagnose faults in electrical circuits (low and high voltage), hydraulic systems, and mechanical components., • Perform welding repairs or modifications as needed., • Conduct routine inspections and preventive maintenance on gate operators and associated equipment., • Utilize industrial tools such as ammeters, ohmmeters, PLCs, and measuring instruments for accurate diagnostics., • Repair or replace motors, sensors, wiring, control boards, and hydraulic components., • Work in cold weather conditions outside; heavy lifting of equipment is required., • Manage maintenance records using CMMS software., • Collaborate with field teams or subcontractors to complete projects efficiently. Qualifications: • Proven experience working on gate operators, traffic barriers, or access control systems., • Strong mechanical background with skills in hydraulics, electrical troubleshooting, welding, and industrial mechanics., • Ability to read schematics, wiring diagrams, and technical manuals., • Experience with electrical systems including low voltage and high voltage circuits., • Self-motivated with a proactive approach to troubleshooting and repairs., • Ability to work outdoors in cold weather conditions year-round., • Own tools are a plus; valid driver’s license required with a clean driving record preferred., • Excellent problem-solving skills and attention to detail., • Good communication skills in English; customer service orientation is valued. Job Types: Full-time, Part-time, Contract Pay: $35.00 - $65.00 per hour Expected hours: 40.0 – 45.0 per week Benefits: • Flexible schedule, • Paid time off, • Professional development assistance Application Question(s): • Must be able to pass a criminal background investigation. Ability to Commute: • New Jersey (Required) Work Location: On the road

Job Description Do you get excited when figuring out how things work? Do you love the challenge of troubleshooting something that’s broken? Would you like to have a part in improving the home life of families in your community? If so, we are looking for you! Mr. Appliance is looking for Appliance Repair Technicians. Apply today! If you value working with people you actually like, having fun while you work, and protecting your free time, this is the place for you. You’ll enjoy working with our team. Oh, and did we mention… no nights or weekends! We’ll also give you the ongoing training that you’ll need. Your Responsibilities as an Appliance Technician As an Appliance Repair Technician, you are the key component in providing excellent customer service by providing high-quality maintenance services for our customer’s appliances. Here are your primary responsibilities: · Diagnose and repair home appliances and equipment. · Provide cost estimates for repairs. · Effectively communicate with the customer to ensure they understand the services needed. · Order parts and ensure efficient use of company materials. · Collect payment for work performed. To Succeed in this Role as an Appliance Repair Technician, Here’s What You Need: Exceptional Customer Service: In this role, you are the face of the company. You get to show off your ability to deliver a great customer experience, showing empathy toward the customer. You are there to accurately diagnose and solve their problem so they can get back to running an efficient household. Getting from Diagnosis to Solution: You aren’t just there to explain what’s wrong – you also need to help the customer understand what needs to be done so that you can resolve their issues quickly. Quality of Work: This role requires critical thinking skills and the ability to problem solve. This ensures that our customers are satisfied, and the job gets fixed correctly, the first time. Efficiency: In order to respond to all of our customer’s needs for the day, you’ll need to be efficient with your time and the speed at which you can complete repairs. Punctuality and Reliability: Our customers are anxiously waiting for your help! To deliver a great experience, you need to be available and show up on time. Pride in the Details: If you keep your work vehicle clean and organized, and value attention to detail in completing customer information and reports, you’ll fit right in. Ongoing Training: New appliances and features come out all the time, so there is a need for regular training. You aren’t afraid to research new equipment and take advantage of training opportunities to expand your knowledge and skills. Job Requirements The following are the minimum requirements to be considered for the Appliance Technician position. · High school diploma or equivalent · Valid driver’s license and clean driving record Previous experience of one year or more in appliance repair is a plus! Benefits & Pay The pay range for this position is $1,200 to $1,900 per week, depending on location and experience. You also will have the opportunity to earn bonuses and commissions. What we have to offer: · No nights or weekends: We value having a solid work-life balance. We work to make a living, without being overworked. · Paid Training: We will train you and help you build a career. The Mr. Appliance Academy is designed to take you from Apprentice to Master Technician quickly. · Bonus & Incentives: We reward hard work with generous bonuses and incentive pay. · Company-Provided Perks: We provide you with a company vehicle and iPad. · Benefits: Health, Dental, Vision, & 401K benefits are offered after 90 days of employment. · PTO: paid time off of 5 days after 1st year, 10 days after 3 years, & 15 days after 5+ years. • Paid Holidays 6 days per year · Fun Team Environment: We stand by our culture and build our team with people that love what they do. If you enjoy taking care of the customer, are awesome at troubleshooting, and love working with your hands and technology, a career at Mr. Appliance as an Appliance Repair Technician could be your future! Apply today!

Job DescriptionJob Title: Facilities Equipment Technician Location: South Plainfield, NJ Type: Contract to Hire Compensation: $25-$35/hour+, depending on experience Work Model: Onsite Hours: Monday through Friday (1st Shift) The Facilities Equipment Technician will work across mechanical, electrical, HVAC, plumbing, refrigeration, and other building systems to help maintain safe, reliable, and efficient facility operations. This position will also coordinate with outside contractors and vendors and respond to both planned maintenance activities and unexpected equipment or facility issues. Responsibilities: • Operate, maintain, troubleshoot, and perform repairs on mechanical, electrical, plumbing, lighting, and other building systems., • Support HVAC systems and controls, including chilled water systems, air handlers/AHUs, boilers, heat exchangers, VAV systems, fan coil units, and refrigeration equipment., • Troubleshoot equipment and electrical systems up to 480VAC using schematics, hand tools, electrical meters, gauges, and common diagnostic or test equipment., • Complete preventive and corrective maintenance work orders using a computerized maintenance management or work-order system., • Respond to equipment, building, and facility issues as they arise., • Maintain mechanical, electrical, and storage areas in a clean, orderly, and safe condition., • Maintain familiarity with HVAC controls and assist with troubleshooting system performance issues., • Coordinate with subcontractors and vendors during maintenance, repair, and project activities., • Help ensure contractors follow applicable facility and safety requirements while onsite., • Maintain and report inventory of spare parts, tools, and service equipment., • Perform general building maintenance as needed, including plumbing, carpentry, and related repairs., • Maintain required documentation, including work orders, receipts, invoices, and other maintenance records., • Follow applicable government, state, local, company, and facility policies, procedures, and safety requirements., • Participate in job-related training and continuous development., • Respond to after-hours emergencies as required., • Maintain availability during scheduled holiday and facility shutdown periods as needed., • Perform additional facilities and maintenance duties as assigned. Qualifications:, • Previous hands-on experience in facilities maintenance, building systems, industrial maintenance, or a related technical environment., • Strong mechanical and electrical aptitude with demonstrated troubleshooting ability., • Working knowledge of HVAC, mechanical, electrical, plumbing, and/or related facility systems., • Ability to read and utilize schematics and use standard maintenance and diagnostic tools., • Basic computer skills, including familiarity with Microsoft Excel., • Strong communication, teamwork, and problem-solving skills., • Ability to work effectively with internal personnel, contractors, and vendors., • Ability to work under pressure and respond effectively to time-sensitive equipment or facility issues., • Ability to lift, push, pull, and/or carry at least 50 pounds., • Ability to regularly stand, walk, reach, climb, stoop, kneel, crouch, and crawl., • Ability to meet the visual requirements necessary to safely inspect, troubleshoot, and repair equipment. System One, and its subsidiaries including Joulé, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Cooling Tower Service Technician - HVAC - Base Salary to 34.00/hour - Mountainside, NJ • Our client, an established commercial and industrial HVAC service provider, is seeking a Cooling Tower Service Technician to join their team in Mountainside, NJ., • This position focuses on preventive maintenance, mechanical troubleshooting, equipment repairs, and component replacements for commercial and industrial cooling towers and related mechanical systems. Candidates with experience in commercial HVAC service, industrial maintenance, mechanical equipment repair, or related field-service work are encouraged to apply., • The Cooling Tower Service Technician will perform routine maintenance and repairs with limited supervision while assisting senior technicians with cooling tower installations, equipment upgrades, and more complex mechanical service projects. Specialized manufacturer training will be provided. Responsibilities: • Perform preventive maintenance on commercial and industrial cooling towers, including cleaning, lubrication, oil changes, inspections, and mechanical adjustments., • Troubleshoot and diagnose mechanical issues involving pumps, electric motors, bearings, belts, pulleys, fans, valves, and piping systems., • Perform routine mechanical repairs, equipment servicing, and component replacements with limited supervision., • Assist with cooling tower installations, equipment upgrades, motor replacements, gearbox replacements, and major mechanical repairs according to manufacturer specifications., • Inspect mechanical equipment for wear, damage, vibration, component failures, and recommended corrective actions., • Assist senior technicians with advanced troubleshooting, mechanical equipment replacement, and complex field-service projects., • Support field-service crews during equipment repairs, installations, and multi-day maintenance projects., • Document preventive maintenance activities, service findings, equipment conditions, completed repairs, and recommended corrective actions., • Communicate equipment conditions, service findings, and project progress to supervisors and management., • Maintain service trucks, tools, mechanical equipment, and work areas., • Follow company safety procedures, applicable regulations, and equipment manufacturer requirements. Qualifications: • 2+ years of hands-on experience in commercial HVAC, mechanical service, industrial maintenance, field service, or a related skilled trade., • Experience performing preventive maintenance, mechanical troubleshooting, and routine equipment repairs with limited supervision., • Working knowledge of mechanical components, including pumps, motors, bearings, belts, pulleys, fans, valves, and piping systems., • Experience servicing commercial or industrial HVAC equipment, cooling towers, or related mechanical systems., • Experience identifying mechanical equipment failures and determining appropriate repair procedures., • High school diploma or GED with relevant technical training or trade experience., • Ability to read and interpret technical manuals, maintenance instructions, and safety documentation., • Basic computer skills, including Microsoft Word, Excel, and Outlook., • OSHA 30 certification or ability to obtain certification in accordance with company requirements., • Ability to perform job-related physical tasks, including traversing active work sites, working outdoors in varying weather conditions, accessing elevated structures, and using personnel lifts with appropriate safety equipment and training. Compensation: • Base salary (paid hourly) in the 30.00 - 34.00/hour range, • 100% employer-paid health insurance, • Profit sharing, • Annual bonus, • Overtime opportunities, • Paid time off (PTO), • Typical Monday–Friday schedule, • Potential rotating weekend approximately once per month, • Prevailing wage on applicable union projects #INDALL

Job DescriptionDescriptionArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking a motivated and detail-oriented Instrument Technician to join our Surveying and Geomatics team. The Instrument Technician will support field survey operations on a variety of transportation, infrastructure, construction, municipal, and land development projects. This position is responsible for assisting the Survey Crew Chief with field measurements, operating and maintaining surveying instruments, collecting accurate field data, setting survey points, and performing general field surveying activities. The ideal candidate is comfortable working outdoors, has an interest in surveying and geomatics, and is eager to develop their technical skills and advance within the surveying profession. Responsibilities • Assist the Survey Crew Chief with daily field surveying operations., • Set up, operate, and maintain surveying equipment including:, • Robotic total stations, • Conventional total stations, • GPS/GNSS equipment, • Data collectors, • Levels and other surveying instruments, • Perform field measurements and collect accurate survey data., • Assist with establishing horizontal and vertical control points., • Perform construction layout and stakeout activities., • Assist with boundary, topographic, utility, roadway, and infrastructure surveys., • Locate and identify existing utilities, structures, property features, roadways, drainage systems, and other physical improvements., • Assist with construction staking for roads, utilities, structures, drainage, and other infrastructure improvements., • Maintain accurate field notes, sketches, measurements, and electronic data., • Download, organize, and transfer field data for use by survey technicians, surveyors, and project managers., • Assist with instrument calibration, equipment checks, and routine maintenance., • Verify equipment is properly functioning and report issues to the Party Chief or Survey Manager., • Follow established survey procedures, project specifications, and quality-control standards., • Maintain a safe work environment and comply with company and project-specific safety requirements., • Work effectively as part of a survey crew and communicate field conditions to supervisors and project staff., • Perform other duties as assigned. Qualifications • High school diploma or equivalent., • 1+ year of experience working in surveying, construction layout, engineering field work, or a related discipline preferred., • Ability to learn and operate surveying instruments and electronic data collectors., • Strong attention to detail and commitment to accurate field measurements., • Ability to read and understand basic construction plans and survey drawings., • Ability to work outdoors in varying weather and terrain conditions., • Ability to safely lift and carry surveying equipment and materials., • Valid driver's license and reliable transportation., • Strong communication and teamwork skills., • Experience operating Trimble, Leica, Topcon, or similar surveying equipment., • Experience with robotic total stations and/or GPS/GNSS equipment., • Experience with construction staking or layout., • Experience with transportation, roadway, utility, or municipal infrastructure projects., • Familiarity with AutoCAD, Civil 3D, Trimble Business Center, or other survey/geomatics software., • Surveying or Geomatics coursework or degree., • OSHA-10 or other applicable safety training., • Interest in pursuing a career progression toward Party Chief, Survey Technician, or Land Surveyor., • Ability to work outdoors for extended periods., • Ability to walk and work over uneven terrain, construction sites, roadways, and other active project areas., • Ability to lift and carry survey equipment weighing approximately 50 pounds., • Ability to stand, walk, bend, kneel, and work around construction equipment and active infrastructure., • Ability to work occasional early mornings, evenings, weekends, or extended hours based on project requirements. BenefitsThe base salary range for this role is indicated in the posting. This range reflects the company’s good faith estimate of the compensation for this position at the time of posting. Final compensation will be determined based on factors such as experience, skills, qualifications, internal equity, and geographic location. Artheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job DescriptionJob Title: Equipment Technician Location: South Plainfield, NJ Type: Contract To Hire Compensation: $30-$32/hour Contractor Work Model: Onsite Hours: Monday through Friday (1st Shift) Equipment Technician Responsibilities: • Will support, sustain, manage equipment, and execute duties in compliance with continual business operation requirements., • Maintain, repair and coordinate maintenance repairs for main process equipment, auxiliary equipment and optimize PM work to achieve the highest uptime with minimal production impact., • Use schematics, hand tools, electrical gauges and common test equipment for calibration, diagnosis and repair or maintenance of equipment., • Perform preventative and predictive maintenance tasks to ensure optimal operation of equipment is maintained., • Maintain and control spare parts inventories for equipment., • Perform work and task interactions using CMMS or equivalent system., • Ensure compliance with all Safety & Security protocols including the storage, disposal of parts and chemicals., • Support facilities and interact with external service providers., • Work with low and high voltage applications up to 480 VAC., • Able to perform tasks using self-breathing air system., • Work in a cleanroom environment adhering to all safety and cleanroom protocols., • Respond to after-hour unscheduled emergencies as needed., • Mandatory availability during holidays and shut-down periods., • Other duties as assigned. Qualifications:, • Experience with MOCVD systems., • Experience with high vacuum systems., • Strong people skills, which include effective communication, teamwork/collaboration and situation resolution., • Strong mechanical and electrical aptitude., • Strong equipment troubleshooting skills., • PC knowledge and use is a requirement., • Experienced in EXCEL, WORD, and TEAMS., • Able to read schematics, plumbing, and pneumatic diagrams., • Ability to lift, push, pull, and/ or carry minimum 50 pounds., • While performing the duties of this job, the employee must be able to stand, walk, reach, climb, stoop, kneel, crouch/crawl daily., • Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Must be able to work under pressure and time deadlines during peak periods. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description About VCI VCI Emergency Vehicle Specialists is the Northeast’s leading supplier and service provider of ambulances. For more than 40 years, VCI has served fire departments, EMS agencies, municipalities, hospitals, and private medical transport organizations. VCI is a Ford Qualified Vehicle Modifier (QVM) certified remount facility and supports customers through ambulance sales, remounting, service, repair, body work, graphics, parts, and mobile service. Position summary The Senior Ambulance Remount Technician performs the skilled mechanical, electrical, fabrication, and systems-integration work required to remove an ambulance module from its existing chassis, refurbish or modify it as needed, and install it safely on a new chassis. The successful candidate is a versatile craftsperson who can read schematics, diagnose 12-volt electrical systems, fabricate precise solutions, and take personal ownership of quality, safety, and schedule. What you will do • Complete ambulance remount projects from initial teardown through final inspection and delivery., • Inspect and document the incoming unit; identify damage, wear, corrosion, fit-up issues, and scope changes before and during teardown., • Safely disconnect, lift, remove, position, align, and secure ambulance modules using approved fixtures, lifting equipment, mounting methods, and torque requirements., • Prepare and modify new chassis and existing modules, including body mounts, brackets, steps, bumpers, cab-to-module interfaces, trim, seals, and related structural components., • Fabricate and install components using measurement, layout, cutting, drilling, grinding, fastening, and welding techniques appropriate to steel and aluminum., • Install, route, terminate, test, and troubleshoot 12-volt DC and 120-volt AC circuits, wiring harnesses, multiplex controls, warning systems, scene lighting, shore-power systems, and vehicle accessories., • Integrate and test module systems such as HVAC, oxygen and suction plumbing, cabinetry, seating, doors, latches, windows, lighting, and safety equipment, as assigned., • Diagnose fitment, electrical, mechanical, and finish-quality problems; develop sound repairs instead of passing defects downstream., • Perform functional testing, leak checks, quality inspections, punch-list corrections, and road-test support before release., • Follow applicable OEM instructions, Ford QVM requirements, federal vehicle safety requirements, and VCI quality and safety procedures., • Accurately record labor, parts, inspection results, and work completed; communicate delays, material needs, and scope concerns early., • Maintain a clean, organized, and safe work area and help less-experienced technicians improve their skills., • All other duties as assignedRequired qualifications, • At least 3 years of hands-on experience in ambulance remounting, emergency-vehicle upfitting, specialty-vehicle manufacturing, truck-body installation, fleet repair, or a closely related trade., • Demonstrated ability to diagnose and repair 12-volt DC electrical systems using wiring diagrams, a digital multimeter, test lights, and systematic troubleshooting methods., • Strong mechanical aptitude and experience with precision measurement, drilling, fastening, sealing, fit-up, and component installation., • Working fabrication skills; ability to safely use common metalworking and power tools. Welding capability is strongly preferred for senior-level candidates., • Ability to read and follow drawings, electrical schematics, work instructions, build specifications, and quality checklists., • A consistent record of safe work, reliable attendance, careful workmanship, and personal accountability., • Valid driver’s license and the ability to safely operate company and customer vehicles., • High school diploma or equivalent; relevant trade-school, military, or apprenticeship training is valued.Highly preferred, • Direct experience completing Type I, Type III, or medium-duty ambulance remounts., • Experience with ambulance multiplex systems, warning-light systems, HVAC, shore power, oxygen/suction systems, or Ford commercial chassis., • Aluminum and/or steel MIG or TIG welding experience., • Emergency Vehicle Technician (EVT), ASE, HVAC/refrigerant, OEM, welding, or related certifications., • Experience with Ford QVM processes, NFPA 1917, CAAS Ground Vehicle Standards, or structured vehicle quality-control systems., • Ability to lead a work cell, mentor teammates, or independently own a remount through completion.How success will be measured, • Safe work with full adherence to lifting, electrical, fabrication, and shop procedures., • Quality at the source: work passes inspection with minimal defects, rework, or comeback repairs., • Productivity against planned labor hours and committed delivery dates., • Accurate work-order documentation, parts accountability, and timely escalation of issues., • Team contribution, reliability, and care for customer vehicles and company equipment.Physical and work requirements This is a hands-on shop role. The employee must be able to stand, bend, kneel, climb, reach, and work in and around vehicle interiors for extended periods; safely use ladders, lifts, hoists, welding and fabrication equipment, hand tools, and power tools; and lift or move up to 50 pounds independently and heavier components with assistance or mechanical equipment. Appropriate personal protective equipment is required. Reasonable accommodations will be considered in accordance with applicable law. Compensation, benefits, and relocation COMPENSATION PACKAGE Hourly pay: $24–$55, based on directly relevant skills and experience. Overtime: Due to strong customer demand and a growing backlog, overtime is expected to remain available for the foreseeable future. Benefits: Medical, dental, vision, 401(k), paid time off, and paid holidays. Relocation: Assistance is available for highly qualified candidates and may include travel, temporary lodging, and moving reimbursement, subject to a written offer, successful completion of applicable background checks, and company policy. Equal employment opportunity VCI Emergency Vehicle Specialists is an equal opportunity employer. Employment decisions are made without unlawful discrimination on the basis of any status protected by applicable federal, state, or local law. This description summarizes the role’s primary responsibilities and is not intended to list every duty. Responsibilities may change based on business needs.

Job DescriptionSenior ADAS Calibration TechnicianAdvanced Technology. Expert-Level Work. Real Career Growth. Are you an experienced ADAS Calibration Technician who enjoys solving complex diagnostic challenges and staying ahead of rapidly evolving vehicle technology? VIVE Collision is looking for a Senior ADAS Calibration Technician to join our growing team. This is more than a calibration role — you’ll serve as a technical expert, mentor, and trusted resource for ADAS operations across multiple locations. You’ll perform advanced diagnostics, calibrations, programming, and system testing while helping ensure every vehicle is repaired according to OEM procedures and the highest safety standards. You’ll also have the opportunity to mentor technicians, provide remote technical support, and assist the ADAS Manager with operational and technical decisions. If you’re ready to take your ADAS expertise to the next level, VIVE Collision wants you on our team. What’s in it for you? • Medical, Dental, and Vision insurance options for you and your family (this includes domestic partners), • $50,000 employer-paid life insurance policy, • 401K plan with an employer match, • Employee Assistance Program includes confidential assistance in the following areas, • Counseling from relationships to stress and substance abuse, • Work/Life benefits, including personal, financial, and legal issues, • Self-Help benefits, • Peak performance coaching, • Lifestyle saving benefits for wellness, shopping, travel, • Personal development and training, • Heath savings account to assist with medical bills, • Paid time off to promote work-life balance, • 8 paid holidays, including Black Friday, and get your Birthday as a floating holiday!, • Growth opportunities within our company The specific pay rate/salary offered to a candidate may be influenced by several factors including experience, education, specialized certifications from OEMs, and where the job is located. Key Responsibilities ADAS Calibration & System Integration • Perform advanced static and dynamic ADAS calibrations following OEM repair procedures and manufacturer specifications., • Diagnose, calibrate, and repair complex ADAS components, including cameras, radar sensors, lidar, ultrasonic sensors, and related vehicle safety systems., • Ensure proper integration of ADAS components with vehicle electrical, mechanical, and safety systems., • Perform comprehensive pre- and post-repair diagnostic scans and functional testing to verify system operation., • Confirm all ADAS repairs meet OEM requirements and vehicle safety standards., • Complete programming, resets, software updates, and system adjustments as required. Advanced Diagnostics & Technical Support • Lead advanced diagnostics and troubleshooting using OEM-specific tools, aftermarket diagnostic platforms, and calibration equipment., • Identify and resolve complex ADAS concerns involving vehicle communication systems, sensors, modules, and electronic components., • Provide remote diagnostic support and technical guidance to ADAS Technicians and shop teams., • Assist locations with repair planning by reviewing diagnostic findings and calibration requirements., • Interpret OEM repair procedures, technical bulletins, wiring diagrams, and manufacturer documentation., • Maintain current knowledge of evolving vehicle technology, ADAS systems, and calibration requirements. Field Support & Multi-Location Leadership • Travel between multiple VIVE Collision locations to perform ADAS calibrations and provide technical support., • Serve as a senior technical resource for field technicians and collision repair teams., • Support the development and training of ADAS Technicians through coaching, mentoring, and sharing best practices., • Provide guidance on complex calibration procedures and assist technicians with challenging repairs., • Perform quality control reviews of completed ADAS work to ensure compliance with OEM procedures and company standards., • Serve as a subject matter expert (SME) and escalation point for ADAS-related technical issues., • Provide operational support to the ADAS Manager, including assisting with workflow management, prioritization, and technical decisions. Operational & Customer Service Excellence • Manage assigned ADAS workload across multiple locations while maintaining efficient scheduling and completion timelines., • Communicate clearly with shop leadership regarding repair status, diagnostic findings, calibration results, and recommendations., • Maintain accurate documentation of diagnostics, calibrations, repairs, and vehicle information., • Represent VIVE Collision professionally while interacting with internal teams, customers, and partners., • Identify opportunities to improve ADAS processes, technician capabilities, and overall repair quality., • Perform other duties as assigned to support collision repair operations. Qualifications • Must be at least 18 years of age., • Minimum of three (3) years of direct ADAS calibration experience or equivalent advanced automotive diagnostic experience., • Advanced understanding of automotive electrical systems, vehicle communication networks, sensor alignment, and calibration theory., • Strong knowledge of OEM ADAS procedures, calibration requirements, and safety standards., • Proficiency with OEM and aftermarket ADAS diagnostic tools, software, and calibration equipment., • Experience diagnosing complex vehicle electrical and electronic systems., • Demonstrated ability to mentor, train, or provide technical guidance to other technicians preferred., • Ability to interpret OEM repair procedures, technical documentation, wiring diagrams, and diagnostic information., • Strong problem-solving skills with excellent attention to detail., • Excellent communication, documentation, and organizational skills., • Microsoft Office Suite proficiency; CCC ONE experience preferred., • Valid driver's license with a clean driving record and ability to meet VIVE insurance requirements., • Ability to work independently while managing travel schedules and supporting multiple locations. Physical & Travel Requirements • Travel between multiple shop and customer locations (company vehicle provided)., • Able to lift up to 50 lbs and work in physically demanding environments (bending, kneeling, standing for extended periods)., • Manual dexterity to operate diagnostic and calibration equipment effectively.

Job Description Quality Depot Solutions (QDS™) provides on-shore support for the international transportation of ISO tanks. Our facilities provide temporary staging options, and our specialized equipment and convenient locations make QDS a premier partner for shippers moving cargo across North America. We are looking for an energetic, reliable ISO Tank Technician to join our team in Rahway, NJ. We are a dynamic, stable and growing company. We have great long term career opportunities across our headquarters, trucking terminals, mechanic shops, depots, tank washes and other locations. If you want to join the industry leader and make a difference, please consider this opportunity and apply at QDSDepot.com. Job DetailsJob Summary: Responsible for performing preventative maintenance and general repairs on ISO Tanks. Determines the overall mechanical condition of ISO Tanks, diagnoses component malfunctions, and initiates repair actions. Properly annotates all maintenance and labor performed in maintenance management software. Duties and Responsibilities: Pressure test, repair and replace valves, gaskets and gauges Drain tank and insuring tank is dry Operate hoists, cranes, and precision measuring and testing instruments Observe and listen to mechanical devices to diagnose causes of mechanical issues Repair and replace defective parts, inspect and adjust used parts Lubricate and clean parts Operate lathe, drill press and grinders Use hand tools and power tools Adheres to all established safety (OSHA) and environmental policies and standards Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety Perform miscellaneous duties as assigned Benefits: • Medical, • Dental/Vision, • Basic Life/Voluntary Life, • Short Term and Long Term Disability, • Flexible Spending Account and Health Savings Account, • Digital health through Recuro, • Employee Assistance Program, • 401k Employer Match and Roth Retirement Savings Plan, • Employee Stock Purchase Program (ESSP) {QCWC and QC Canada not eligible}, • Additional Voluntary BenefitsRequirementsSkills and Abilities: Candidates will possess a mechanical background Possess good communication skills (verbal and written) Detailed oriented Ability to wear a respirator, be comfortable with both heights on top of tanks Work in enclosed spaces inside of tanks Education and Experience: High school diploma, completion of G.E.D., or equivalent vocational school preferred, but not required. Additional Job InformationSupervisory Responsibility: None Position Type/Expected Hours of Work: • This is a full-time position, and days of work are Monday through Friday.Company InformationWork Environment:, • This job operates in a depot and outside environment. Weather conditions may vary.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • The employee will regularly and repetitively be required to talk, hear, sit, type, reach and grasp., • This position may require standing, walking, bending, kneeling, stooping or crouching. The employee must frequently lift and/or move items up to 50 pounds. Must be able to wear Personal Protective Equipment in all conditions., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunities: Quality provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Plainfield, NJ area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job Description Service Technician (C Tech) - McGuire Cadillac Our dealership has an outstanding opportunity for a results-focused, highly motivated Automotive Technician C. The C-Level Technician performs routine vehicle maintenance, prep new cars for delivery, basic repairs, and inspections while working under the guidance of senior technicians as needed. This position plays an important role in delivering quality service and ensuring customer satisfaction. Responsibilities • Perform routine maintenance services, including oil changes, tire rotations, fluid services, and filter replacements., • Conduct multi-point vehicle inspections and report findings to the service advisor., • Perform basic brake, suspension, steering, and cooling system repairs., • Mount, balance, and repair tires., • Replace batteries, belts, hoses, wiper blades, and other wear items., • Assist senior technicians with more advanced diagnostic and repair work., • Maintain accurate repair orders and document work performed., • Follow manufacturer repair procedures and dealership standards., • Keep work area clean, organized, and safe., • Properly use and maintain shop equipment and tools., • Adhere to all safety policies and environmental regulations., • Participate in ongoing training to improve technical knowledge and skills.Requirements Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Basic mechanical knowledge of automotive systems., • Ability to perform routine maintenance and entry-level repair work., • Willingness to learn new technologies and repair procedures., • Ability to work efficiently in a fast-paced environment., • Strong attention to detail and commitment to quality workmanship., • Ability to work effectively as part of a team., • Valid driver's license with an acceptable driving record.Education and/or Experience, • High School Diploma or GED required., • Completion of a technical or vocational automotive program preferred., • One year of automotive service experience preferred, or an equivalent combination of education and experience., • ASE certifications are a plus but not required. Apply Today!

Job Description Job Description POSITION: Senior Service Technician REPORTS TO: Field Services Manager OBJECTIVE: Be a valuable Verrex Team Member as a Field Service Technician, providing white glove service to high profile corporate clients. Must be able demonstrate technical expertise in solving client problems. Strong customer service and communication skills are a must as Verrex strives to continue to be a leader in the Audio-Visual Industry. COMPENSATION: Non-exempt (hourly), monthly cell phone stipend, $600 monthly vehicle stipend, EZ-Pass and Gas Card. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs), • Access to AFLAC supplemental insurance products This benefits summary is intended as a general overview and is subject to the terms and conditions of the official plan documents. SKILLS & QUALIFICATIONS: • Minimum 3 to 5 years industry experience., • Must have experience using Tesira and Q-sys software to troubleshoot and make adjustments. Knowledge of DSP audio principles for proper configuration (understanding gain structure, a must). Able to make minor design changes in Qsys or Biamp. Qsys Level 1 and/or Biamp Tesira Certified, • Able to use Crestron Toolbox and Debugger to load code, firmware, and troubleshoot to determine if issue is settings, hardware, or determine if it is a likely code issue to refer to our programming team., • Understanding of IP network principles, Network Switches, AVoIP and Dante Audio., • Able to troubleshoot Poly and Cisco VTC hardware and PC based UC appliances for Zoom and Teams applications., • Understand principles of building and maintaining audiovisual systems, utilizing appropriate reference materials., • Understand how to use all tools as necessary to fabricate and field-engineer solutions., • Can load, test, troubleshoot, and commission control system programs, • Can load, test, troubleshoot, and commission audio DSP systems, including fine tuning of gain structure and AEC RESPONSIBILITIES: • Service Delivery, • Provide telephone and onsite service and preventive maintenance visits for all Verrex customers, including Verrex Service Agreement Customers and Time and Materials Customers as assigned by Service Management, • Complete all service visits in accordance with instructions as indicated on work orders. Bring all questions regarding scope of work, or all customer requests for tasks outside the current scope of work, to Service Department Management, • Work overtime as requested and as necessary to meet deadlines and customer demands, • Service and Support Administration, • Complete and submit all necessary written and electronic documentation for all service visits, including work orders, equipment lists, preventive maintenance checklists, repair forms, and follow-up emails. Submit copies of relevant documentation to customer, • Assist Service Team with documentation of open service items in system of record. Take ownership of all open items assigned to you for resolution by performing any necessary technical research and communicating progress to Service Team, • Take ownership of expediting equipment repairs in the field, including contacting manufacturers and repair houses for case / RMA information, completely filling out all Verrex paperwork, and setting proper expectations with customers regarding equipment turnaround time, • Perform mark-ups of onsite as-built drawings as equipment changes and modifications are made. Bring back markups to Verrex Operations Manager for processing, and return updated drawings to customers, • Assist fellow technicians by providing installation / troubleshooting guidance, • Position will occasionally require other work assignments such as installing new systems, pickup and deliveries as necessary., • Assist fellow technicians by providing installation / troubleshooting guidance, • Technician Mentoring, • Provide mentoring / coaching for all field service technicians, inducing troubleshooting assistance, customer service skills coaching, and situational awareness training., • Take initiative and ownership of complex open service items, including small-scale project management and inter / intradepartmental interfacing as necessary to affect resolution of items, • Take initiative to share relevant technical findings with Verrex Field regarding service issues, potential equipment failure trends, etc., • Sales, Customer Service and Relationship Management, • Clearly communicate arrival and departure time to both customers and Verrex Service Team. Follow-up proactively in the event of delayed arrivals, • Promote Verrex 220 (Time and Materials) services for all out-of-scope work. Promptly bring potential sales leads to the attention of Sales and the Service Team immediately, • Develop and maintain strong professional relationships with existing Service Agreement Customers, • Notify Service Management of all customer feedback, and highlight potential service issues, • Verrex-Furnished Tools and Equipment, • If provided, operate Verrex-supplied vehicle for travel to and from Verrex offices, customer sites and training locations as required, in accordance with all applicable traffic laws., • Maintain vehicle in accordance with Verrex Fleet Guidelines. Promptly notify Fleet Management for all vehicle service needs or issues., • Maintain vehicle stock of all required tools and supplies. Promptly request equipment that needs to be ordered or restocked., • Maintain personal stock of Verrex and user-furnished tools and supplies., • General Policy and Best Practices, • Check Verrex Schedule Board nightly to receive the next day’s work assignments, • Adhere to Verrex dress code whenever on a customer job site or in a Verrex office, • Keep work areas safe, clean and organized, • Submit timesheets daily 1. Ongoing Training and Certification: • Maintain CTS Certification, • Attend all Verrex-sponsored training days, • Attend all offsite manufacturer and equipment-specific trainings as dictated, • Maintain / expand industry knowledge through all Verrex-approved media as dictated by job and customer demands This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job Description Astro Pak is the nation's leading precision cleaning and passivation contractor specializing in on-site cleaning of high purity gas and fluid systems, as well as precision cleaning of components and hardware at the company's Cleanroom facilities. Astro Pak provides services to over 15 sectors including: Data Centers, Biotechnology, Pharmaceutical, Aerospace, Semiconductor, and other selected Industrial markets. The company, founded in 1959, has performed on-site precision chemical cleaning in every State of the Union as well as several projects in Asia, Canada, continental Europe, England, Ireland and Mexico. Astro Pak is looking for motivated individuals who want more than a typical job. As an Associate Field Technician, you'll travel to cutting-edge facilities across the country while learning a specialized technical trade used in industries like aerospace, semiconductors, pharmaceuticals, and advanced manufacturing. If you enjoy hands-on work, solving problems, and seeing new places while building valuable technical skills, this role could be a great fit. $3,000 Sign-On Bonus What You'll Experience This is not a typical entry-level job. It's a traveling technical career path. You'll receive immersive training and work alongside experienced technicians performing specialized chemical cleaning and passivation on mission-critical fluid and gas systems. Every project is different. One week you may be working at a semiconductor facility, the next supporting aerospace manufacturing. Expect: • Extensive travel to project sites across the U.S., • Hands-on work with specialized equipment and chemical processes, • Rapid skill development and certifications, • Opportunities to grow into senior technician or leadership roles Travel requirements: • 80%+ travel nationwide, • 30–50% night shift work, • Overtime, weekends, holidays, and short-notice travel may be required What You'll Do As part of a field service team, you will: • Set up and operate specialized equipment for chemical cleaning and passivation, • Safely handle process chemicals such as citric acid and caustics, • Use PPE and follow strict safety and compliance procedures, • Load, transport, and unload project equipment and materials, • Drive company vehicles to job sites (vans, trucks, forklifts), • Perform hands-on work in a variety of environments (indoors, outdoors, rooftops), • Maintain organized workspaces aligned with 5S/CEO standards, • Complete OSHA and internal safety training, • Support mission-critical customer facilities across the country Who Thrives in This Role We hire for attitude and train for success. The best candidates are: • Mechanically inclined, • Comfortable working with tools and equipment, • Adaptable to new environments, • Safety-focused, • Excited about travel and hands-on work, • Interested in building a long-term technical career Basic Requirements • Valid Class C driver's license with clean driving record, • Real ID or Passport required for air travel, • Ability to attend two weeks of paid training in California within the first 3 weeks of employment, • Medical DOT certificate, • Strong math skills (ratios, percentages), • Comfortable using mobile technology and basic programs (Word, Excel, Outlook), • Fluent in English with strong communication skills, • Ability to lift 50 lbs. and work in PPE in changing environments, • Willingness to work night shifts, overtime, weekends, and holidays Preferred (But Not Required) • High School Diploma or GED, • Technical schooling or trade certification, • OSHA / HAZWOPER / Confined Space certifications, • Field service or hazardous chemical handling experience Why Join Astro Pak? Paid Training & Certifications - No experience required. We provide hands-on training and help you earn industry certifications. Travel Opportunities - Work at advanced manufacturing and technology facilities across the country while building your career. Career Growth - Many of our technicians advance quickly into senior technical roles, trainers, or leadership positions. Team Culture - Work alongside experienced professionals in a safety-first, supportive team environment. Competitive Benefits • Highly subsidized medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and family leave, • Travel stipend, • Training and development opportunities, • Flexible spending accounts and more Equal Employment Opportunity & Reasonable Accommodations Astro Pak is an equal opportunity employer, including individuals with disabilities and protected veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, ancestry, national origin, age, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), sexual orientation, gender, gender identity or expression, marital status, physical or mental disability, medical condition, genetic information, reproductive health decision-making, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Astro Pak takes affirmative action to employ and advance in employment qualified individuals with disabilities and protected veterans. Astro Pak provides reasonable accommodations to qualified applicants with disabilities and for other needs protected by applicable law. If you need an accommodation to complete an application or participate in the interview process, please contact talent@astropak.com . Please do not include medical information in your application. Requesting an accommodation will not negatively affect your consideration for employment.

Job DescriptionA Position: Field Service Technician Location: Hillside, NJ A technology driven vertical transportation solution provider headquartered in Memphis, Tennessee, and with offices around the United States. This company connects trusted and respected brands to create the premier integrated provider of Systems & Components, Digital Solutions, and Technical Services for the Vertical Transportation industry. As a transforming company, we are continuously looking for positive, energetic, passionate people to join our team. Seeking an experienced Field Service Technician to join our Technical Services Team, based out of Hillside, NJ. Reporting to the Eastern or Western US Territory Manager, this position plays an integral part on the team by providing on-site support for our customers and traveling either locally or across the United States to assigned field service jobs. There are three levels within the Field Service Technician role and based on the skills completed through training, individuals can progress as a Field Service Technician Helper, Field Service Technician, or Senior Field Service Technician. Primary Responsibilities: • Field Service:, • Perform on-site turn-key services on our customer sites, • Conduct vibration analysis, laser alignment, and on-site balancing, • Maintenance and Repair:, • Test AC/DC motors and pumps, perform troubleshooting & diagnose problems, • Inspect motors, pumps, and the controls, • Installation and Removal:, • Remove and install all types of rotating equipment, • Health and Safety Compliance:, • Adhere to all safety policies and procedures, including the wearing of appropriate personal protective equipment, • Communicate with internal team members to ensure procedures and processes are being followed in a safe and effective manner, • Perform other duties as assigned Job Requirements:, • High school diploma or equivalent preferred, • 5 years experience in rotating apparatus field repair (AC and/or DC electric motors, pumps, blowers, etc.) preferred., • Experience in an electric motor/job shop environment., • Technical skills required include: troubleshooting of problems, electrical theory, mechanical theory, and understanding of vibration analysis and alignment. Capabilities:, • Adaptability:, • Approaches change or newness positively., • Adjusts to changing procedures for accomplishing work., • Contributing to Team Success:, • Provides necessary resources or helps remove obstacles to help the team accomplish its goal., • Shares important or relevant information with the team regularly., • Fulfills team responsibilities; demonstrates personal commitment to the team., • Communication:, • Communicates ideas clearly and effectively., • Uses appropriate nonverbal communication (eye contact, gestures, posture) when communicating with others., • Pays attention to communication from others., • Bilingual Spanish language skills preferred., • Initiating Action:, • Takes immediate action when confronted with a problem or when made aware of a situation., • Does not wait for others to take action or to request action., • Identifies ways to make a job easier or more productive., • Safety Awareness, • Identifies safety issues and problems by checking equipment and/or work area regularly., • Reports or corrects unsafe working conditions., • Displays knowledge of all related safety or security regulations., • Follows safety and or security procedures on the job. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. job description template will automatically generate here that you can customize after you complete the required fields and save this pageRef: #160-Wind Texas

Job Description Full-time Field Service Technician, responsible for the repair, maintenance, support, and accuracy verification of strength of materials test equipment. UTM. Daily electrical and mechanical repair and upgrading equipment in the field and in the factory. • Two Year Technical Degree or experience preferred, • Drivers license required, • Customer support via phone, in person, and electronically with remote connect software., • Track Customer issues and resolutions, Previous experience with customer service is a plus., • Strong Troubleshooting and critical thinking Skills, • Positive and Professional Demeanor., • Basic electrical understanding of diodes, resistors capacitors inductors, motor controllers, and microprocessors., • Basic operational skills to operate and use a multimeter for measuring Ohms, current, voltage inductance, and capacitance., • Basic Mechanical understanding of and troubleshooting capabilities for gears, shafts bearing belts, and pulleys., • Familiarity with UTM's or Strength of Material Equipment Including Instron, MTS, Zwick, Tinius Olsen, Thwing Albert, and others helpful., • Understanding the principles of load cells and calibration procedures is a plus., • Understanding basic metrology procedures is a plus, • Travel domestically and some internationally will be required on a normal basis, all travel and living expenses are paid for including meals, airfare, car rental, hotel stays, and all meals. Employees can bank frequent traveler points and miles for personal use and personal travel, • Employees are provided with paid time off, 401 K benefits, 100 percent employer health insurance, bonuses, and paid holidays. \nCompany Description Instru-Met Corporation is a small Electro-Mechanical Engineering Company founded in 1974. We are a service-oriented manufacturing Company that provides customers with unique and creative solutions in the Field of Strength of Materials Test Equipment. We provide custom test systems, fixtures, load cells, and calibration services to all kinds of industries including some of the top medical device companies some of the very well-established ones, and many of the new startups that New Jersey is known for. Our equipment and services have been employed to test some of the best tapes and innovative adhesives for the top manufacturer of strong tapes and adhesives. Our equipment and our services have been employed to test the strength of the spacesuits and their components and the metals used in the space crafts used by NASA to keep our astronauts safe during space travel. Our list of clients spans the full spectrum of fortune 500 companies, and we have many startups and entrepreneurial groups who we work with every day. Our service engineering staff helps us keep the test systems in the industry running optimally and accurately to ensure that medical, institutional, industrial, consumer, and government-provided products that are manufactured, tested, and delivered to the world are safe and long-lasting. Instru-Met Corporation is a small Electro-Mechanical Engineering Company founded in 1974. We are a service-oriented manufacturing Company that provides customers with unique and creative solutions in the Field of Strength of Materials Test Equipment. We provide custom test systems, fixtures, load cells, and calibration services to all kinds of industries including some of the top medical device companies some of the very well-established ones, and many of the new startups that New Jersey is known for. Our equipment and services have been employed to test some of the best tapes and innovative adhesives for the top manufacturer of strong tapes and adhesives. Our equipment and our services have been employed to test the strength of the spacesuits and their components and the metals used in the space crafts used by NASA to keep our astronauts safe during space travel. Our list of clients spans the full spectrum of fortune 500 companies, and we have many startups and entrepreneurial groups who we work with every day. Our service engineering staff helps us keep the test systems in the industry running optimally and accurately to ensure that medical, institutional, industrial, consumer, and government-provided products that are manufactured, tested, and delivered to the world are safe and long-lasting.

Job Description The schedule for this role is Monday through Friday, from 9:00 AM to 5:00 PM. NuCO2 is the largest national provider of beverage grade liquid CO2 to the food service and hospitality industry. We have an immediate need for an Installation Technician who is responsible for managing on-site installation, repair, maintenance, and equipment testing for CO2 hi-pressure cylinders, and other products to customers on an established route. Installation Technician Benefits: • Mostly local runs, • Paid weekly, • On the job training and uniforms provided, • Excellent Health, Dental, and Vision benefits after 30 days, • Paid time off (vacation, holidays, sick time), • Matching 401k, • Employee Discount Program, • Stable, consistent work, • Direct deposit, • Overtime eligible (varies) Installation Technician Responsibilities: • Perform installation, repair, maintenance, and equipment testing for beverage gas systems, • Maintain assigned service vehicle, tool inventory, parts inventory, and general upkeep of vehicle, • Use handheld device for routing information, customer delivery information, and communication with assigned location management (depot), • Responsible for the safe and accurate loading, transporting, and unloading of equipment Installation Technician Qualifications: • Minimum of 1 year experience as a technician or similar role, • CDL preferred, minimum valid US Driver’s license for at least 24 months, • Must be able to lift up to 55 pounds and frequently maneuver 56-175 pounds, • Must be able to pull and retract a fill hose (up to 100 feet), • Must be able to read, write and speak English, • Will be required to pass a pre-employment background check, physical and drug screen, • Must have a clean driving record (no accidents or moving violations last 24 months) NuCO2 provides competitive pay and an exceptional benefits package, including health, dental, disability, and life insurance; paid holidays and vacation; a 401(k)-retirement plan; employee discounts; and opportunities for educational and professional development. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law.

Job Description Job Title: Service Technician Job Type: Full-time Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses, and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence, and competency at all levels of the organization. We are looking for highly motivated, self-starter with ability to work with minimal supervision to join our growing team of HVAC professionals. Signing Bonus Based on Experience Qualifications: Minimum of 5 Years Experience • EPA Certified • Clean Driver's License This position is responsible for diagnosing & repairing HVAC system's, with accuracy and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays. Responsibilities Service technician is responsible for diagnosing and repairing HVAC systems, on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays, when necessary. · Maintain and repair heating, air conditioning, and ventilation systems consisting of various mechanical, duct, and piping systems. · Identify maintenance risks on equipment. · Diagnose electrical and mechanical faults for HVAC systems. · Clean, adjust and repair systems, and perform preventative maintenance. · Perform emergency repairs promptly and efficiently. · Site preparation & clean-up · Maintain a clean truck and job site. · Ensure compliance with code standards and system specifications. · Maintain regular attendance and willingness to work OT and weekends. · Work as a professional with clients, co-workers, and subcontractors Required skills and strengths: · A valid driver's license and a clean driving record · Proficient in reading schematics, wiring diagrams, and work plans. · Union Employee Preferred · Experience as an HVAC Service Technician · Ability to work staggered schedule · Must be able to perform the physical requirement of the job · Strong customer service and communication skills · Able to work in a fast-paced environment · Able to multi-task and focus amid distractions · Good listener and a team player · Detail oriented · Organized, flexible and follow directions · Hard-working and motivated Minimum Requirements · Must be able to lift a minimum of 75 lbs. · Must be able to climb ladders. · Must be able to endure walking, squatting, bending, balancing, climbing, kneeling, crawling and prolonged standing. · Ability to advise customers of potential issues and suggest upgrades to improve efficiency and indoor air quality products. · Follow instructions from supervisor and complete in a timely manner. · Work cooperatively with others. Work independently with little direction. · Interact with clients to ensure satisfaction.

Job Description Residential Plumbing Service Technician Showtime Construction LLC Location: Assigned service routes throughout North, Central, and South Jersey Job Type: Full-time Pay: $25–$35 per hour, based on experience; paid weekly Schedule: Monday–Friday. Saturdays may be required during peak season with advance notice. About Us Established in 2012, Showtime Construction LLC provides residential service, renovations, and commercial construction throughout New Jersey. Our Home Warranty Division is hiring experienced Residential Plumbing Service Technicians who deliver quality repairs, work efficiently, and provide professional customer service. This is a high-volume service position for dependable technicians who can diagnose problems independently, manage their assigned route, and take ownership of each work order from arrival through final documentation. What We Offer • Competitive pay based on experience, paid weekly., • $250 sign-on bonus after 90 days of successful full-time employment., • Steady, year-round work opportunities., • Monday–Friday scheduling, Saturday during peak season (with notice)., • Dispatch support and clear daily assignments., • Opportunities for advancement and expanded responsibilities as the company grows. Daily Workload & Performance Expectations Technicians are expected to complete six assigned residential service work-order tickets per day. Routes are planned to account for travel time and anticipated job complexity. Applicants should be comfortable working in a busy service environment with clear daily productivity expectations. The goal is to complete the assigned route within a standard eight-hour workday, including travel between jobs and required documentation. Technicians must maintain a productive pace without compromising safety, repair quality, or customer service. Unexpected repair conditions, unavailable parts, customer-access issues, and authorization delays must be reported to dispatch immediately. Management will determine any necessary route adjustments or next steps. Additional hours require management approval, and all time worked must be recorded accurately. Every assigned work order must be completed on that day unless management approves an exception. Unfinished work must have a documented reason, status, and an approved plan for follow-up. Key Responsibilities • Residential Plumbing Diagnostics & Repairs: Diagnose and repair leaks, water-pressure problems, drain issues, and other residential plumbing failures., • Fixture & Equipment Installation: Install and replace toilets, faucets, garbage disposals, P-traps, shut-off valves, water heaters, and related plumbing fixtures., • Boiler & Zone System Repairs: Diagnose and repair residential boiler components and zone systems within applicable licensing requirements and the technician’s qualifications., • Piping Systems: Work confidently with copper, PVC, and PEX piping using appropriate installation and repair methods., • Route & Time Management: Arrive on time, follow the assigned schedule, and communicate promptly with dispatch about delays or changes that could affect remaining calls., • Work Authorization: Obtain required approvals before performing work outside the authorized scope., • Repair Verification: Test completed repairs for proper operation and leaks before leaving the property., • Customer Sign-Off: Review completed work with the customer and obtain their signature on the work order before leaving each completed job. If the customer is unavailable or declines to sign, document the reason and notify the office before closing the ticket., • Real-Time Documentation: Update the company’s mobile work-order system with arrival and departure times, diagnosis, repairs performed, materials used, required photos, customer signatures, and accurate ticket status., • Customer Service: Explain repairs clearly, treat customers and their homes respectfully, protect surrounding surfaces, and leave the work area clean., • Safety & Workmanship: Follow applicable plumbing codes, safety procedures, and company quality standards. Qualifications • Strong residential plumbing service and repair experience., • Ability to diagnose plumbing problems and complete authorized repairs independently., • Working knowledge of applicable New Jersey plumbing codes and safety requirements., • Experience with water heaters, fixtures, shut-off valves, drains, and residential piping systems., • Strong time management, organization, and problem-solving skills., • Ability to meet daily service-call expectations while maintaining quality workmanship., • Reliable vehicle capable of carrying tools and materials., • Valid driver’s license and appropriate vehicle insurance., • Own standard plumbing and service tools., • Willingness to travel within an assigned New Jersey service territory., • Comfortable using smartphone applications and digital work-order systems., • Professional communication and customer service skills., • Dependable attendance and punctuality., • Bilingual skills are preferred. Apply Today We are looking for technicians who take pride in their work, communicate clearly, and consistently follow through on daily assignments. Submit your résumé. Please include a brief description of your residential plumbing experience and the average number of service calls you complete daily in your most recent position.

Job DescriptionDescription: The JF Petroleum Group stands as a premier leader in the North American fueling infrastructure industry, offering comprehensive turn-key solutions for distribution, construction, and service needs. We serve a diverse clientele including retail fueling stations, commercial and government fleets, and emergency power customers. The Service Technician has a wide variety of skills and will be able to work through difficult problems. This person installs, maintains & repairs fuel dispensers; submersible fuel pumps; service station site controllers; credit card readers; cash register consoles; pumping PCW; tank & line monitoring equipment; various other types of equipment found in service station and convenience gas stations. • Work in a safe manner, • Understand and comply with applicable fire safety, OSHA, and EPA rules and regulations., • Observes, analyzes, and determines action for service and repair of equipment., • Performs necessary repairs to correct analyzed situations in a professional and productive manner., • Performs repairs and scheduled maintenance on equipment, • Performs factory authorized modifications per specifications., • Responsible for maintaining tools required for performing the job effectively and safely., • Responsible for following customer’s safety and housekeeping guidelines when performing repairs at customer site., • Resolve warranty calls on dispensers and tank monitors., • Perform service calls as needed on an after-hours basis, • Perform break fix and preventative maintenance on service station electronics, computers, and the fuel dispensing systems, including electronic, plumbing and mechanical work., • Provide quality customer service that exceeds customer expectation by ensuring that all assigned duties are completed in a cost-effective manner., • Perform required prerequisite work necessary to obtain and maintain certification from original equipment manufacturers., • Work with service project crew on service projects, assist lead technician(s) with the start-up, and commissioning of equipment., • Will be required to travel as needed., • Work with service project crew on service projects assist lead technician(s) with the start-up and commissioning of equipment.Requirements:, • High School Diploma or GED required, • Must have a valid Driver License, • Familiarity with computer operations and an aptitude for learning computer skills., • Gilbarco Dispenser certification and Veeder Root Tank Monitor certification, preferred., • Must be eligible to work in the United States., • Physical Requirements: Ability to repetitively lift, carry, push, pull up to 50 pounds, frequent bending, stooping, standing 8-10 hours per day., • Must be able to meet company’s employment requirements, which includes passing a drug screen, background check, and MVR, if driving for the company JF Petroleum offers: • Competitive pay, • 401(k) with company match, • Paid time off, • Paid holidays, • Health benefits (eligible 1st of the month following 30 days) including Medical, Vision, Dental, Disability, • Life insurance-company provided, • Bonus program eligibility, • Paid training for field personnel, • Uniforms provided for field personnel, • Relocation Assistance will be considered for qualified candidates *JF Petroleum Group is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Paid time off We are looking for a skilled and experienced technician to join our team! HVAC/R Technicians install, maintain, repair and overhaul various types of equipment, including refrigeration systems, heating and cooling systems, and commercial kitchen equipment. A team player who is comfortable working independently, loves the feeling of a job well done, and takes pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Perform preventative maintenance, corrective maintenance and installation of refrigeration, heating, air conditioning, and ventilation and plumbing applications., • Install, maintain, and repair package units, split systems, boilers and other mechanical equipment., • Install, repair, and maintain light commercial rooftop units, boilers, controls, and other mechanical equipment., • Maintain all ventilation systems including preventative maintenance tasks and rebuilding of equipment when need., • Perform repairs and installation on HVAC/R equipment and commercial kitchen equipment for residential and commercial customers., • Perform maintenance and repair of HVAC/R equipment for commercial and residential applications including commercial refrigeration equipment., • Demonstrate strong knowledge of refrigeration systems, walk in refrigeration/freezer units and some experience on centrifugal and rotary screw compressor chillers., • Validate laboratory air flows to meet OSHA safety requirements., • Conduct a wide range of repairs in accord with OSHA regulations., • Plumb and connect all necessary PVC piping to drain condensation from the evaporative coil., • solder, pipe-fitting, blue print reading, climbing ladders, digging ditches, preparing pipes and fittings, cleaning, • Work on motor controls, pneumatic controls, chillers, high pressure steam, pumps, valves, piping, etc., • Service residential and commercial plumbing equipment., • Perform minor electrical and plumbing repairs., • Replace and repair malfunctioned/defective HVAC equipment, troubleshoot electrical components and wiring. Qualifications: • Past experience as an HVAC service technician, • Refrigeration experience, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Ability to work after hours, over weekends and on public holidays with short or no notice, • Ability to work in confined spaces, • Excellent written, verbal and interpersonal skills, • Reliable mode of transportation

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiring, • Complete service tickets/reports on each and every job.Qualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of boilers, heat pumps, air handlers, and geothermal systems, • Commercial and residential experience preferred, • Ability to climb ladders, crawl, and lift 40 pounds

Job Description Job Title: Commercial HVAC Service Technician Job Location: Edison NJ Operating Company: Energy Transfer Solutions Pay Transparency: $35 to $55 Hourly FLSA Status: Non-Exempt Sign on bonus offered About: Under the guidance of the Service General Manager, the Commercial HVAC Service Technician plays a key role in delivering top-tier service to our customers by expertly installing, servicing, and starting up a wide range of HVAC systems. From first-time installations to diagnosing and repairing complex issues, you’ll be the go-to problem solver our customers count on. Energy Transfer Solutions - A member of the AIR Control Concepts family. Overview: Energy Transfer Solutions is your trusted partner for innovative HVAC solutions. Since 2003, we’ve provided premier equipment, parts, controls, and services to commercial and industrial clients across PA, NJ, and DE. Our expert team delivers tailored solutions, from system design to turnkey installations, ensuring optimal performance and efficiency. With a focus on quality, integrity, and customer success, ETS is committed to enhancing your building's comfort, reliability, and value. Check out our website: Specialty HVAC Solutions, Parts & Services | ETS HVAC Essential Duties and Responsibilities: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where neededExperience & Requirements:, • Minimum 3–5 years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record;, • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education., • Company Perks – Uniforms, vehicle and phone (as applicable), and a supportive team environment that values your expertise. Equal Employment Opportunity Statement Energy Transfer Solutions is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. Work Authorization and Visa Sponsorship Applicants must be legally authorized to work in the United States. At this time, Energy Transfer Solutions does not provide employment-based visa sponsorship for this position, either now or in the future. Powered by JazzHR scvfbdiHrL

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development Please do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced Commercial HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial establishments. VRV/VRF a PLUS! You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Extensive work with commercial HVAC systems, including chillers, rooftop units, and mechanical systems, • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems, • Use common tools of the HVAC trade in daily work (e.g. multimeter, refrigerant gauges, charging charts, hand tools etc.), • Ability to install, service, and repair water source heat pump systems, • Establish customer rapport to ensure the highest levels of satisfaction, • Ability to layout, fabricate, assemble, install, and maintain refrigerant piping systems, pipe supports, and fixtures in commercial and industrial settings, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • 5-10 years experience as an HVAC service technician, • Valid Drivers License and clean driving record, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 50 pounds

Job DescriptionResidential HVAC Service Technician We invite full-time Residential HVAC Service Technicians to join our team in Union, NJ. Those with no HVAC experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. ������ Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-14 weeks. Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. You take pride in doing the job right, especially when nobody's checking. You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know Strong residential HVAC knowledge — you've been running service calls and diagnosing real problems in real homes. Solid understanding of safety regulations and local codes. Valid driver's license with a clean driving record. Fluent in English. What Will You Do? You'll run residential HVAC service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: Diagnosing and resolving HVAC issues across a range of equipment — furnaces, heat pumps, mini-splits, central A/C, boilers. Spotting potential problems early to prevent callbacks and breakdowns. Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ������ Apply now to join a remarkable team! You should be proficient in: • HVAC Service & Installation, • HVAC Maintenance, • HVAC Repair Machines & technologies you'll use: • ServiceTitan

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Provide onsite installation and repair of controls systems Experience preferred in the following: • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Microsoft Visio Required skills and strengths: • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed, • Work independently Job Type: Full-time

Job Description Service Technician – Direct Residential Thermal Diagnostics, Technical System Maintenance, and Customer Care Job Overview • Company: Uncle Mike's Home Service LLC., • Salary/Pay Rate: $25.00 to $35.00 per hour (Plus Performance Bonuses and Incentive Pay)., • Location: Lincroft, NJ., • Job/Employment Type: Full-Time., • Schedule: Monday to Friday (With weekend availability as needed)., • Mandatory Licences & Certifications: Valid Driver's License and EPA 608 Certification. The Opportunity You will serve as a premier residential specialist, executing critical thermal diagnostics and equipment maintenance across a high-density consumer market. This role provides the operational autonomy to manage your daily dispatch schedule while serving as the authoritative technical consultant for local homeowners. You will directly drive regional client retention and brand trust, backed by a stable firm that combines small-business heart with enterprise benefits. How You Will Make An Impact • Perform advanced physical diagnostics, mechanical repairs, and custom preventative maintenance on residential HVAC units., • Communicate technical malfunctions and structural repair paths clearly to property owners to build absolute trust., • Conduct microscopic component assessments and capture exact airflow, refrigeration, and electrical performance readings., • Execute seasonal technical tune-ups and complex diagnostic service evaluations across diverse heating and cooling configurations., • Catalog comprehensive field service findings, technical recommendations, and part requirements within the corporate database., • Manage, inventory, and secure company-issued testing instrumentation, trade tools, and your assigned service vehicle., • Enforce rigorous environmental safety protocols, handling chemical refrigerants strictly according to regulatory frameworks. Required Qualifications & Experience • Minimum of 3 years of verified field experience specializing in residential HVAC service and mechanical systems., • Active, non-expired EPA 608 Certification necessary to handle and recover regulated consumer refrigerants., • Valid driver’s license maintained in good standing to accommodate responsive residential territory travel., • Proven troubleshooting capabilities with the capacity to isolate intricate electrical and mechanical system failures independently., • Advanced personal communication skills and a meticulous, clean demeanor while operating inside client residences. Preferred Qualifications & Experience • Completed technical degree in HVAC-R technology, mechanical engineering, or a recognized vocational apprenticeship., • Hands-on familiarity with modern high-efficiency heat pumps, ductless mini-split arrays, and smart control interfaces., • Completed safety milestones including an active OSHA 10 card or specialized residential gas safety credentials. Compensation & Benefits • Competitive hourly compensation ranging from $25.00 to $35.00 scaled to residential mechanical troubleshooting mastery., • Robust financial incentives including immediate access to performance bonuses, incentive pay, and corporate referral rewards., • Stable financial infrastructure featuring a dependable weekly pay cycle and a comprehensive retirement savings program., • Elite health protection architecture including premium medical, dental, vision insurance, and a Health Savings Account., • Full group safety allocations covering flexible life insurance policies, disability protection options, and wellness programs., • Substantial paid leave benefits encompassing traditional vacation allotments, observed holidays, sick leave, and parental leave., • Provided corporate service vehicle, commercial gas privileges, complete field uniforms, and required protective safety equipment., • Fully funded technical professional development, ongoing product certifications, and interactive employee reward contests. About Us Uncle Mike's Home Service LLC is a premier residential mechanical contractor specializing in high-performance heating, ventilation, and air conditioning solutions. We maintain a family-oriented workplace culture built upon technical craftsmanship, clear communications, and uncompromised client care. Our leadership treats workforce satisfaction as a central pillar, providing our technicians with modern diagnostic tools, steady year-round hours, and an engaging environment. Uncle Mike's Home Service LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description A family-owned business since 1924, A. Duie Pyle provides a range of integrated transportation and distribution solutions throughout the Northeast. Supported by our vast network of Less-Than-Truckload (LTL) service centers, warehouse facilities, and dedicated locations, we have the ability to offer flexible and seamless integrated solutions tailored to our customer’s needs. Simply put, when it comes to integrated supply chain solutions, Pyle People Deliver. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Position Summary: As a Field Trainer, Support Specialist you will be required to travel throughout our Fleet Maintenance Facilities, located in the Northeast, and perform hands on, remote and guided diagnostic training to help support our shops excel. Additionally, you will be tasked with providing training on all facets of equipment, administration duties, new hires employee training and supporting the technician team with complex diagnostic repairs. The responsibilities of the position include, but are not limited to: • Travelling to outlying Fleet Maintenance Facilities providing maintenance support and required training, • Conducting and surveying training sessions to ensure material retention needs are met, • Creating metrics to measure how the training is retained, utilized and the impact of it, • Providing New Hire training on policies, procedures and fleet maintenance software, • Reviewing daily OOS for complex issues and provides technical assistance, • Reviewing monthly progress on all apprentices and performs final skills test prior to graduation, • Assisting with shop vacancies, perform special assignments and provides operations supports To be qualified for this position, you must possess the following: • Strong knowledge of class 8 tractor and trailer maintenance and DOT/OSHA guidelines, • Must have 5 plus years of maintenance experience in a fleet maintenance environment, • Must have a compliment of tools required to perform most Class 8 repairs, • Strong computer skills and proficient in: heavy-duty diagnostic software, Microsoft Word, Excel and Outlook, • 50% travel time on the road visiting various shops, • Strong written and oral communication skills, • CDL/State Inspection a plus We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Join First Class Electric: Service Technician (Electrician) – Central New Jersey Pay: Performance-based Job Type: Full-time Are you a skilled electrician with a passion for residential electrical work? Do you want to earn what you’re truly worth while focusing on what you do best—helping customers and delivering quality work? If so, First Class Electric is looking for a motivated Service Technician to join our team. What Makes Us Different This isn’t your typical commission-based job—we offer a true partnership. You’ll earn a portion of the income from each job you complete, giving you the opportunity to grow your income without the hassle of running your own business. We take care of the headaches: • No administrative burden—we handle customer service, scheduling, and billing., • No out-of-pocket costs—we provide work vehicles, power tools, and tablets., • No marketing stress—we generate the leads, so you focus on the work you love. What We’re Looking For We’re seeking dependable, resourceful, and personable electricians who take pride in their work and customer service. You should be passionate about your craft, have a great work ethic, and enjoy connecting with customers and teammates alike. Requirements • Experience: 5+ years in residential electrical work (some commercial experience is a plus)., • Proficiency: Skilled in troubleshooting, repairs, upgrades, and electrical improvements., • Code Knowledge: Strong understanding of residential electrical codes., • Independence: Ability to work independently without supervision., • Customer-Focused: Excellent communication and people skills, • Team Player: Capable of working solo or collaborating on larger projects., • Adaptability: Flexible schedule and ability to work some weekends as needed., • Clean Record: Ability to pass criminal and driving background checks., • Presentation: Professional appearance, hygiene, and attitude., • Language: Basic English communication skills required. Why Work with Us? At First Class Electric, we offer a supportive, modern work environment with opportunities for personal and professional growth. Here’s what you can expect: • Flexible Schedule: Prioritize work-life balance., • Honest Service: No hard sales — just honest, quality work., • Great Customers: We’ve built strong relationships with customers who appreciate excellent service and understand the value of quality work., • Company Reputation: We are highly rated and trusted throughout New Jersey. Benefits • Health insurance, • Paid time off, • Vehicle, equipment and tablet provided Your Next Steps If you’re ready to join a team that values your skills and supports your growth, we’d love to hear from you. Don’t just be employed—become a partner in something greater. Apply Now: Please email your resume, and we’ll contact selected candidates to schedule an interview. All applications will be kept confidential. First Class Electric is an Equal Opportunity Employer. Company DescriptionFirst Class Electric is a trusted mostly residential and light commercial electrical service provider based in Central New Jersey. We are dedicated to delivering high-quality workmanship, honest communication, and exceptional customer care. We stive to build lasting relationships with our customers and team by focusing on transparency, integrity, and a commitment to excellence. At First Class Electric, we foster a supportive, growth-oriented work environment where skilled electricians can thrive. Our team is built on professionalism, collaboration, and a shared passion for providing reliable solutions with a friendly, professional touch. With a strong reputation and top-rated service, we are proud to serve the New Jersey community and look forward to welcoming talented professionals as we continue to grow.First Class Electric is a trusted mostly residential and light commercial electrical service provider based in Central New Jersey. We are dedicated to delivering high-quality workmanship, honest communication, and exceptional customer care. We stive to build lasting relationships with our customers and team by focusing on transparency, integrity, and a commitment to excellence.\r\n\r\nAt First Class Electric, we foster a supportive, growth-oriented work environment where skilled electricians can thrive. Our team is built on professionalism, collaboration, and a shared passion for providing reliable solutions with a friendly, professional touch.\r\n\r\nWith a strong reputation and top-rated service, we are proud to serve the New Jersey community and look forward to welcoming talented professionals as we continue to grow.

Job DescriptionMaintenance Electrician / Industrial Maintenance Technician Join a growing manufacturer that values safety, innovation, and continuous improvement. This is an opportunity to work with advanced automated equipment while building your technical skills in a collaborative, team-focused environment. Job Duties & Responsibilities -Troubleshoot, repair, and perform preventive maintenance on electrical, mechanical, hydraulic, pneumatic, PLC, and automated production equipment to maximize equipment uptime. -Install, maintain, and repair industrial electrical systems including motors, controls, switchgear, transformers, drives, HMIs, robotic systems, and building electrical infrastructure. -Read and interpret electrical schematics, blueprints, hydraulic diagrams, and technical manuals to diagnose and resolve equipment issues. -Complete maintenance documentation, support equipment changeovers, follow GMP and safety standards, and identify opportunities for continuous improvement. Required Skills & Experience -Minimum of 5 years of industrial maintenance experience in a manufacturing environment with strong electrical troubleshooting skills on 240V and 480V systems. -Proven experience troubleshooting PLCs, automation systems, HMIs, drives, and industrial controls. PLC troubleshooting and automation experience are required. -Ability to troubleshoot hydraulic, pneumatic, mechanical, and electrical equipment while reading electrical schematics and technical drawings. -High School Diploma or equivalent with technical training in industrial maintenance or electrical systems. Must be willing to train on 1st shift before transitioning to either 2nd Shift (3:00 PM-11:30 PM) or 3rd Shift (11:00 PM-7:30 AM). Preferred Skills & Experience -Associate's degree in Electrical Technology, Industrial Maintenance, Mechatronics, or a related technical field. -Experience with robotic systems, servo drives, CMMS/EAM software, food manufacturing, or GMP environments. Pay Rate Range 35.00 per hour + Apply today to join a company that invests in employee development while offering the opportunity to work on advanced manufacturing equipment in a safety-first environment. Disclaimer: By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/ DJ Miljkovic dmiljkovic@synerfac.com 732-271-9333 Synerfac Technical Staffing