Field technician jobs in Clifton, New JerseyCreate job alerts

Job DescriptionDescription: Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when required Controls, Controls Interface & Automation • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system response Preventive Maintenance & Compliance • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and procedures Customer Service & Communication • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicable Leadership & Mentorship • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluations Administrative & Technology Responsibilities • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements: Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction) Experience • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferred Technical Skills • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagrams Physical Demands • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPE Work Environment • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noise Competencies & Attributes • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job DescriptionSmart, Caring and Responsible Maintenance and Service Technician wanted full-time. KEIL Heating and Air Conditioning are seeking an experienced residential Service Technician for a full-time position. KEIL has been providing comfort to homeowners in Northern New Jersey for over a century and we have a growth opening. This is a great opportunity to be part of a wonderful staff that takes care of our established customer base, some of which have been with us for three generations. We have a fun customer focused environment with friendly, caring co-workers. We're a company committed to quality service by empowering reliable & self-motivated individuals. Goal-oriented candidates will provide planned maintenance and service to our homeowner customers. We are a residential-based company that provides services on ductless, central and high-velocity air conditioning systems as well as gas and LP-fired furnaces, water and steam boilers. Knowledge of using an iPad is a plus as we dispatch, Flat Rate prices and Invoices using our proprietary software on iPads in the field and in the office. Primary Responsibilities: • Perform maintenance on gas furnaces, gas water and steam boilers and central air conditioning systems, water heaters, etc. in the manor set forth by KEIL., • Perform service on gas furnaces, gas water and steam boilers and central air conditioners and water heaters, etc. in the manor set forth by KEIL., • You must be customer focused and always be prepared to deal directly with the homeowner on their terms and always with a positive attitude., • Provide your own hand tools (A complete list is provided by KEIL). KEIL will provide all major tools., • You must be able to climb a ladder both inside and outside of the home without fear of heights., • You must be able to lift and move 75 pounds or more with frequency., • You must be able to clearly and concisely offer replacement systems, accessory items and maintenance agreements to our customers., • You will participate in our Emergency night service rotation., • Have a clean driving record and a current New Jersey driver’s license., • You must have your own transportation to and from our office., • Other responsibilities as assigned by management. Key Competencies: • We are only looking for individuals that possess a high energy level and a positive attitude., • Strong Interpersonal and communication skills - verbal and written (English)., • Strong Listening, problem analysis and problem-solving skills., • Well-organized, accurate and detail-oriented with a hands-on attitude., • Ability to make fast, accurate and logical decisions., • Ability to follow instructions and to provide instruction to others. Education and Experience: • HVAC Technical school graduate (Top 10% Only)., • 2 - 5 years of experience in the residential installation, maintenance and service field., • Continuing education proof., • Refrigeration Certification - Universal., • Gastite certification., • Manufacturer's training certifications., • Customer sales skills., • NATE Certification is a plus., • Computer skills including proficiency in windows based systems. Benefits: • On-the-job training (30 - 60 days with a series of mentors)., • 7:00 - 3:30 Monday - Friday alternate Saturdays plus additional overtime as required., • Advancement opportunities throughout the company., • Professional working environment with your co-workers and our customers., • Uniforms., • Paid holidays and personal days., • Medical Insurance., • Dental insurance., • Life Insurance., • Long-term disability insurance., • 401K plan with company match is provided., • Bonus incentives and residual income opportunities are available., • Profit sharing program based upon hitting company goals. Only those looking for a long-term career with a great team should apply. Please email your resume to be considered for this position.

Job Description We are looking for a commercial HVAC service estimator with minimum 5 years of commercial HVAC experience to join our service team. This is a commercial service estimator position; applicants with residential service experience or those seeking a sales\account manager position are not encouraged to apply. Successful applicants must have prior field experience with commercial HVAC services. Responsibilities of this position include: • Review assigned service technician reports for field and diagnostic information, • Identify HVAC parts and materials needed for a service repair, • Collect pricing information for necessary parts and materials from local vendors, • Estimate labor hours needed to make repairs, • Write a scope of work for performing identified repairs, • Use company software systems to prepare quote pricing and issue proposals for customer approval, • Respond to customer questions on repair proposals, • Order materials and parts or select them from inventory for approved proposals, • Check materials and parts for completeness prior to technician dispatch for executing repairs, • Participate in weekly estimator meetings for service quoting, • Provide phone support for field technicians performing repairs Benefits include: • flexible paid-time-off plan, • 401K plan with matching, • Multiple healthcare plans, including dental, • Vision, Life & Disability insurances, • Offices closed between Christmas and New Years, as well as other holidays, • Great team environment, • Career Development and Promotion to Leadership Roles Please find out more about Evco online at www.evcomechanical.com Company DescriptionEvco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career Support and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.Evco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career\r\n\r\nSupport and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job Description Job Title: HVAC Technician Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automation. Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Jul 6, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a Senior HVAC Technician (Snr HVAC Tech) to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC technician with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Service Technician will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Service Tech will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Service Technician will • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Job Description: As a Refrigeration Technician, you will work with the maintenance team to maintain, troubleshoot, and repair HVAC, Refrigeration and facilities equipment to maintain critical temperatures and improve reliability of our systems. This role is the resident expert in refrigeration systems. Shift: Monday to Friday - 7:00am to 3:30pm You will... • Maintain and operate industrial refrigeration systems including large rack systems, split systems, blast chillers, cooling towers and ancillary equipment., • Lead and educate compliance with all safety, food safety, and security standards., • Perform preventive maintenance and routine inspections on assigned refrigeration and HVAC systems and ancillary equipment as needed., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower-level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in refrigeration., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced refrigeration processes, tools and techniques., • Audit maintenance personnel work and provide feedback to improve performance and quality., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • Write and/or modify PMs to standardize across the network and increase effectiveness., • Repair and perform predictive and preventative maintenance procedures on CO2 and Freon refrigeration systems including, but not limited to compressors, pumps, fans, heat exchangers, glycol systems, various industrial utility systems, motors, and power distribution systems., • Give direction and/or training to entry level refrigeration technicians including, but not limited to day-to-day operations, inspections and inspection techniques, basic repairs and repair techniques, and conformance to all state, local, and HelloFresh regulations and policies., • Perform building project work as assigned. You have... • 4-6 years of experience with refrigeration repair and maintenance in an industrial setting,, • Advanced understanding of rack system refrigeration and associated equipment., • Experience with repair and maintenance of glycol systems, heat exchangers, HVAC, and water chiller systems., • Experience with electrical systems including single and three phase motor systems, power distribution, and low voltage controls with the ability to troubleshoot to the component level., • Current Environmental Protection Agency (EPA) Section 608 certification., • All necessary regulatory licenses required by local municipalities to work in the field of industrial refrigeration., • Ability to demonstrate excellent work habits in line with Good Manufacturing Practices (GMP’s)., • Ability to conform to all OSHA, PSM, HAZMAT, and HelloFresh safety programs and regulations., • Ability to demonstrate understanding of proper handling and recycling procedures for chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), Hydrofluro-Olefins (HFO), CO2, and other industry standard refrigerant types., • Ability to safely replace mechanical and electrical components including motors, motor starters, switches, solenoids, pumps, refrigeration valves, compressors, and auxiliary refrigeration equipment., • Experience working with a wide range of networked refrigeration controls platforms., • Ability to withstand walking, lifting, bending, stooping, climbing ladders, walking on roofs, and working in confined spaces., • Basic computer skills., • Ability to read and understand drawings, schematics and diagrams., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude. You’ll get… • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+, • Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Newark, NJ Pay Range$39.50—$39.50 USDAbout HelloFresh We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers’ homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: • Europe: EUaccommodations@hellofresh.com, • APAC: APACaccommodations@hellofresh.com, • United States: USCandidateAccommodations@hellofresh.com, • Canada: CAaccommodations@hellofresh.com

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset., • DOT certification, forklift experience, or welding background is a plus. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, competitive pay, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Time Off and Holidays. All Compactor Technicians are members of a Union, and benefits will be provided as outlined in the collective bargaining agreement. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Job Description We are looking for an experienced Manager to join our team! A Sales Manager takes on many different roles as they manage the day-to-day operations including: generating sales, communicating with customers, building client relationships and managing the technical team. Position Responsibilities: • Perform a high volume of warm calls to potential customers (must have excellent phone sales and the ability to complete a one-call close), • Engage and consult incoming customers, both in-person and over the phone, to successfully generate and close sales, • Meet, greet and recommend services to customers, • Manage technician workflow and the status of the customers vehicles’ repairs, • Order parts and inventory, • Deliver a high level of customer service and quality control over all aspect of the center's business, operations, and work product What We Offer: • Competitive compensation packages and incentive programs, • Ongoing training and field support, • Daytime work hours, • Growth opportunity Job Requirements: • Minimum of 2 years of sales experience, • Excellent closing skills, • Strong commitment to customer service and relationship building, • Ability to communicate and use interpersonal skills at a sustained high level, • Capable of multi-tasking and executing in a fast-paced environment, • Coachable, honest and goal-oriented team player, • Must have valid driver's license If you are interested in this position, please apply through this site or contact Christian Harless at charless@aamco.com. Powered by JazzHR eVxIAjW0H1

Job DescriptionASBESTOS FIELD PROJECT MONITORS/AIR SAMPLING TECHNICIANSOur firm Omega Environmental Services with its main office in S. Hackensack, NJ, and a satellite office in NYC has continued to expand and evolve as an essential environmental health and safety business during COVID-19. We currently have open asbestos and other field positions for qualified individuals with good communication skills and reliability. We are interested in both candidates with asbestos industry experience/certification(s), as well as entry-level individuals looking to make a career change and/or jumpstart a new career pathway in environmental health and safety. [Asbestos Project Monitor/AST job details]1. After orientation, training, and equipment assignment is complete, project field assignment set-up sheets are emailed out to asbestos field staff based upon their availability (days/nights/weekends). 1. For larger projects greater than 5 shifts, a Project Manager will also coordinate an on-site kick-off meeting to discuss job-specific requirements. A field tech can call the Project Manager and/or Training Coordinator at any time if they have any questions or concerns., 2. PM/AST travels to NY and/or NJ sites with air sampling equipment and required field documentation (punctuality is important because clients/contractors are waiting for us to start abatement projects)., 3. Asbestos air samples are set up at/around abatement work areas(s) according to published regulations and typically run 6-8 hours (while field tech. has to be present on-site and continuously observe and draft a sketch)., 4. After the monitoring shift, the field technician packages/ships air sample cassettes to the assigned laboratory and heads home or back to the office if there are equipment needs., 5. Air results are posted on-site following shift.Qualified candidates must have good communication, computer, and writing skills, plus be able to travel to/from project sites in New Jersey and New York. E04JI800f7i540056ki

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off Benefits/Perks • Competitive Compensation, • Great Work Environment, • Career Advancement OpportunitiesJob Summary We are seeking an Ophthalmic Technician to join our team! As an Ophthalmic Technician, you will be responsible for conducting the initial assessment of a patient, including listening to their complaints or concerns, obtaining a relevant medical history, and measuring intraocular pressures, auto-refraction, visual acuities, visual field testing, fundus photography, corneal topography, A-scan testing and more. Technicians also do contact lens trainings with patients, as well as ordering/stock of contact lenses. You will also assist as needed with procedures done by the doctor in-office, help educate patients on eye health and best practices, and maintain an organized, clean work environment at all times. The ideal candidate has strong attention to detail, exceptional customer service skills, and is extremely organized. A kind, compassionate team player with a positive attitude and desire to learn is a plus! Job is full time, Monday through Friday, 8:45AM- 5 PM as well as select Saturdays. This position is NOT for the summer only, we are looking for a reliable FULL TIME employee. Responsibilities • Greet patients and gather medical history and relevant information for their visit, • Conduct an initial assessment of the patient and record all findings, • Assist in in-office procedures, as needed, • Educate patients on best practice and eye health, • Maintain a clean, organized workspace at all timesQualifications, • Previous customer service experience desired, • Strong customer service skills, • Excellent organizational skills, • Excellent attention to detail, • Familiarity with basic computer programs and medical/eye terminology

Job Description Our client, an industry leader in electrical and electronic product manufacturing, is seeking a Test Technician to join their team. As a Test Technician, you will be part of the manufacturing support team supporting quality assurance and product testing. The ideal candidate will demonstrate attention to detail, problem-solving skills, and a proactive attitude, which will align successfully in the organization. Job Title: Electrical Test Technician Location: Kearny, NJ Pay Range: $24-$28/ hourly Shift: Day Shift, Monday through Friday What's the Job? • Perform electrical product testing in a manufacturing environment to ensure quality standards are met, • Conduct troubleshooting, repairs, and preventive maintenance on electronic assemblies, • Verify the accuracy of electronic instruments and testing equipment, • Develop and write procedures for testing and inspection processes, • Investigate and troubleshoot component-level issues to maintain product integrity What's Needed? • High school diploma or equivalent qualification, • Minimum of 2 years' experience in electronics or related field preferred, • Experience with electrical testing equipment such as Ratiometers, Hi-Pots, Volt meters, • Knowledge of Siemens power configurations is a bonus, • Ability to follow safety procedures and maintain high-quality standards What's in it for me? • Opportunity to work with a reputable organization in a dynamic industry, • Supportive work environment focused on safety and quality, • Potential for growth and career advancement within the company, • Paid Time Off from day one and 10 company-paid holidays, • Tuition Reimbursement and a generous 401(k) employer contribution Upon completion of waiting period associates are eligible for: • Medical and Prescription Drug Plans, • Dental Plan, • Supplemental Life Insurance, • Short Term Disability Insurance, • 401(k) If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Job DescriptionCompany Description Job Description Certified Tower Climber Technician 100% Travel | United States | Full-Time Position Overview Crown Innovations is seeking Certified Tower Climber Technicians to support the installation, inspection, repair, and remediation of communication towers and related infrastructure. This role is responsible for climbing communication towers and performing hands-on fieldwork to support mission-critical communications systems. The selected candidate must demonstrate strong attention to detail, a commitment to safety, and the ability to work at height in varying weather conditions. This is a 100% travel position, requiring deployment to job sites nationwide, often on short notice. Key Responsibilities Tower Climbing & Installation • Climb communication towers and related structures to perform installation, inspection, repair, and remediation activities, • Perform hands-on work at height in compliance with safety standards and project requirements Inspection & Documentation • Document tower conditions through photos, videos, and written reports, • Complete inspection checklists and technical documentation accurately, • Verify compliance with ANSI/TIA, OSHA, and other regulatory standards Field Operations & Support • Perform site preparation and cleanup, • Support material handling and movement of equipment, • Assist with structure assembly and installation activities, • Operate equipment as required and authorized, • Perform manual labor in support of tower and site work Team Collaboration • Work collaboratively with field and office personnel, • Support team operations to ensure project timelines and deliverables are met Safety & Compliance • Follow all company and industry safety protocols, • Utilize proper PPE, rigging practices, and fall protection systems, • Maintain compliance with all applicable safety regulations and standards Minimum Required Qualifications • Certified Tower Climber (ComTrain, SPRAT, or equivalent), • Minimum 1–2 years of tower climbing experience, • Familiarity with tower types including monopole, guyed, and self-supporting structures, • Knowledge of rigging practices, PPE, and fall protection systems, • Ability to read and interpret tower drawings, inspection checklists, and technical reports, • Strong documentation and communication skills, • Valid driver’s license with a clean driving record, • Willingness to travel and work flexible hours as required, • Ability to pass a drug screening and background check Travel & Work Requirements • This is a 100% travel position across the United States, • Travel may be required on short notice based on project needs, • Employees are required to cover travel-related expenses in advance, which are reimbursed by Crown every 10 days in accordance with company policy Physical & Work Environment Requirements • Ability to work at heights for extended periods, • Ability to perform physically demanding work in outdoor environments, • Ability to work in varying weather conditions including heat, cold, and rain, • Ability to perform manual labor and handle materials and equipment safely Preferred Qualifications • First Aid / CPR and rescue training, • Certified Competent Climber / Rescuer, • OSHA 10 or OSHA 30 certification Schedule & Work Environment • Typical field schedule consists of extended 10-hour workdays, • Work may require non-standard hours based on project requirements, • This is a 100% travel position Compensation Hourly Rate Range: $35 to $40 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • Medical insurance and prescription drug coverage, • Dental insurance, • Vision insurance, • Life and AD&D insurance, • Long-term disability insurance, • Short-term disability insurance, • Paid time off and paid holidays, • Retirement plan with company match About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC Visit: www.crownci.com for additional information about Crown Innovations, Inc. We offer a competitive benefits package including a matching 401K, comprehensive medical, dental, and vision plans, and generous PTO. Crown has been voted one of the best places to work in the Washington, DC area; we built this reputation by hiring great people who value and support the mission of our customers. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most of the Crown positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET IV/Resident Engineer Certified Professional with expertise of managing heavy highway / bridge construction projects, and a construction inspection team. This professional will be responsible for the project record keeping, correspondence, compiling, reviewing, and delivery of required daily inspection reports. The ideal candidate will chair various project meetings, record and prepare and distribute accurate meeting minutes. This individual will need to be well experienced in bridges, highways and have an extensive background in construction especially with clients such as NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Resident Engineer, providing extensive inspection and management of construction project and serve as the Client’s liaison with the Contractor. The RE shall be capable of managing a 3+ CM/CI staff, possess strong communication, computer, and writing skills and be experienced with CPM Scheduling, • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work with client to inform public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Manage all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Bachelor’s degree in civil engineering or construction management, • Minimum of 8 years of experience with 3+ years of experience on projects $10M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • Licensed professional engineer or NICET 4 Highway Construction Inspection required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has supervisory responsibility. The RE shall be capable of managing a 3+ CM/CI staff PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $94,000 - $122,200. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer. #LI-KS1

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job Description Dempsey Uniform & Linen Supply is seeking a strategic, systems-oriented Maintenance Systems & Planning Manager to lead the standardization and continuous improvement of maintenance operations across our three production facilities. This role is the central architect of how maintenance is planned, executed, and optimized company-wide — building the procedures, tools, training programs, and standards that govern our production network. This is a hands-on leadership role without direct reports. The Maintenance Systems & Planning Manager partners closely with each site’s Maintenance Manager and Tech IVs, serving as their primary resource and mentor. The position requires regular travel to all production facilities. Key ResponsibilitiesMaintenance Standardization & PM Program Development ▪ Lead the standardization of maintenance practices across all three production facilities, creating consistent, repeatable processes company-wide ▪ Mentor site Maintenance Managers as they build out their individual preventive-maintenance programs ▪ Ensure alignment of all site-level PM activity with enterprise standards and best practices ▪ Continuously evaluate and improve maintenance procedures to reduce downtime and increase reliability CMMS Ownership (MaintainX) ▪ Serve as company-wide system owner for MaintainX, Dempsey’s Computerized Maintenance Management System ▪ Manage the vendor account-executive relationship and system licensing ▪ Lead full CMMS implementation at each production location ▪ Conduct ongoing PM and parts audits to ensure data integrity and system accuracy ▪ Oversee the escalated work-order process across all sites ▪ Establish and maintain company standards for parts creation, work-order completion, asset creation, and PM completion Equipment Install Project Management & Reliability ▪ Partner with senior leadership to specify equipment and plan capital and reliability projects across all production sites ▪ Manage smaller install projects independently; collaborate on larger projects with the Senior Director ▪ Lead major reliability efforts on tunnel/RAU systems, boilers, dryer controls, and fire-suppression systems ▪ Track project timelines, scope, and budgets; communicate status to leadership Vendor Relationship Management ▪ Serve as the primary liaison for Dempsey’s maintenance vendor network ▪ Manage vendor correspondence for parts procurement, install planning, and repair coordination ▪ Handle smaller vendor projects independently; partner with senior leadership on larger engagements ▪ Key vendor relationships include Kannegiesser, E-Tech, Innoway, Integritec, Ecolab, Keyence, Johnson Controls, BDS, and others Maintenance Training & Technician Development ▪ Drive development of structured on-the-job training materials and skills-progression programs for maintenance technicians ▪ Create evaluation frameworks for each technician level, establishing a clear career pathway within the trades ▪ Partner with leadership to build and maintain training documentation and competency assessments ▪ Coach and develop site Maintenance Managers to grow their teams’ technical capabilities Talent & Intern Program Management ▪ Manage and mentor the Maintenance & Engineering summer intern program (typically two interns per year) ▪ Create intern project scopes, host weekly check-ins, and keep participants on track toward deliverables ▪ Actively participate in the interviewing and hiring of maintenance technicians across all sites QualificationsEducation & Certifications ▪ Bachelor’s degree in Engineering, Industrial Technology, Facilities Management, or a closely related field preferred; equivalent experience considered ▪ Relevant technical certifications (e.g., CMRP, CPMM, CEM or trade licensure) a plus Experience ▪ 7–10 years of progressive experience in maintenance management, plant engineering, or a related industrial discipline required ▪ Proven experience managing or implementing a CMMS platform (MaintainX experience a plus) ▪ Demonstrated ability to manage projects independently, from scoping through completion ▪ Experience coordinating with external vendors for parts procurement, repairs, and equipment installations ▪ Background in industrial laundry, uniform services, textile production, or similar manufacturing environments preferred ▪ Prior experience developing technician training programs or structured skills-progression frameworks preferred Knowledge, Skills & Abilities ▪ Strong knowledge of preventive and predictive maintenance programs and best practices ▪ Excellent communication and interpersonal skills; able to mentor and influence without direct authority ▪ Ability to manage competing priorities across a multi-site, geographically dispersed organization ▪ Familiarity with boiler systems, tunnel washers, dryer controls, or fire-suppression systems preferred ▪ Proficiency with MS Office Suite; comfortable working with data and maintenance metrics ▪ Willingness and ability to travel regularly to production facilities ▪ Valid driver’s license with a clean driving record required Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWe are a security Integrator serving NJ/NY area. We are seeking an employee to install cable networks for CCTV, and access control systems and aisst field technicians. Room for advancement to become a field technician. Applicant must have experience installing voice/data cable runs. Applicant should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills. There are overtime and year-end bonuses. We provide a company vehicle to go to job sites We offer medical benefits, Aflac options, pension plan, vacation/sick time. There is overtime and an end of the year bonus. Must have a valid and clean driver's license. Compensation depends on experience.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$93,475.37—$119,546.72 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job DescriptionBenefits: • Free uniforms, • Opportunity for advancement, • Training & development About the Role: Join Appell Striping of North Jersey as a Pavement Maintenance Technician and take charge of dynamic pavement maintenance projects in North Jersey. We are looking for a part-time technician to join a dedicated team that prides itself on delivering high-quality line striping, sealcoating, and asphalt repair services to enhance the safety and aesthetics of our commercial and industrial customers. Responsibilities: • Deliver our pavement maintenance services including line striping, sealcoating, crack filling, and asphalt repair to our commercial customers., • Oversee and deliver the application of pavement marking materials and techniques to ensure quality results., • Conduct site assessments, estimates, and prepare work plans for efficient project completion., • Maintain equipment and tools, ensuring they are in optimal working condition., • Collaborate with team members on best practices and safety protocols., • Communicate with clients to understand their needs and provide exceptional service., • Monitor project timelines and budgets, ensuring adherence to schedules., • Implement safety measures and ensure compliance with industry and local regulations.Requirements:, • Proven experience in the pavement maintenance field including line striping, sealcoating, crack filling and asphalt repair; 3+ years of experience strongly preferred., • Valid driver's license; with a clean driving history., • Willingness to travel as some jobs may require 1-2+ hours of drive time for several days in a row., • Willingness to work non-standard hours as many customers require work be completed before they open or after they close., • Knowledge of pavement marking materials, equipment, and application techniques., • Excellent communication and customer service skills., • Ability to read site plans to correctly execute a new layout for a parking lot or parking garage., • Strong attention to detail and commitment to quality workmanship. About Us: Appell Striping of North Jersey is a rapidly growing brand in northern New Jersey and is looking to add to our small, but growing, team. Our commitment to quality and customer satisfaction has earned us a loyal client base, and our employees enjoy a supportive work environment that values teamwork and professional growth.

Job DescriptionSalary: Company Overview Montana Construction Inc. is a family-owned heavy construction company specializing in sewer, water, bridge, and emergency services for municipalities, utility authorities, and private entities across New Jersey, New York, and Pennsylvania. We pride ourselves on delivering efficient, dependable, and quality service to every client. Job Summary The CCTV / Grout Technician is responsible for inspecting underground pipelines using closed-circuit television (CCTV) equipment, analyzing footage to identify structural issues, and performing grout mixing and injection for pipeline repair. This is a full-time, on-site role based in Lodi, NJ, requiring strong mechanical aptitude, attention to detail, and a commitment to safety in a demanding field environment. Key Responsibilities • Set up, deploy, and maintain CCTV inspection equipment to assess the condition of underground sewer and utility pipelines., • Review and analyze inspection footage to identify structural defects, blockages, and conditions requiring repair., • Mix, prepare, and inject chemical grout to seal leaking joints, cracks, and infiltration points in pipeline infrastructure., • Maintain accurate and detailed inspection records, daily reports, and work documentation., • Perform basic troubleshooting and field repairs on CCTV and grouting equipment; report significant maintenance needs to the supervisor., • Adhere to all safety protocols, confined space entry procedures, and OSHA requirements at all times., • Drive a CDL-required inspection or grouting truck to and from job sites in compliance with DOT regulations., • Perform other duties as assigned by the Foreman or Superintendent. Required Qualifications • Experience with CCTV inspection equipment for underground pipeline assessment., • Familiarity with grout mixing, injection techniques, and pipeline repair methods., • Strong mechanical aptitude and ability to troubleshoot equipment issues in the field., • Knowledge of construction and pipeline inspection safety protocols, including confined space procedures., • Strong organizational and recordkeeping skills., • Ability to work in confined spaces and outdoors in varying weather conditions., • Valid Commercial Drivers License (CDL) with a clean driving record required., • Current DOT medical certification required. Preferred Qualifications • Experience in heavy construction or underground utility work., • NASSCO PACP/LACP certification or familiarity with pipeline defect coding standards., • OSHA 10-Hour Construction certification., • Willingness to learn and adapt to new tools, technologies, and inspection methods. Work Environment & Physical Requirements • Full-time, on-site role at active construction and inspection job sites across NJ, NY, and PA., • Daily exposure to confined spaces, sewer environments, chemical grouting agents, heavy equipment, and varying weather conditions., • Ability to lift and carry equipment up to 75 pounds regularly., • Ability to stand, bend, kneel, and work in tight or confined spaces for extended periods.

Job Description Laboratory Technician Title: Laboratory Technician Location: Secaucus, NJ Reports to: Laboratory Manager Per diem Frontage Laboratories Inc. is an award winning, publicly listed (HKSE), full-service CRO/Contract Research Organization operating over 25 state-of-the-art laboratories across the US, Canada and China, and growing over 30% YOY. Our core competencies include drug metabolism, pharmacokinetics/ pharmacodynamics (PK/PD), safety and toxicology, bioanalytical services, chemistry and manufacturing controls for drug development, and core laboratory services for clinical trials. Position/Job Summary: The laboratory technician performs a variety of laboratory procedures as required by the study protocol. Laboratory technicians are responsible for assisting the Laboratory Manager, Principal Investigator, Clinical Research Coordinators, and other medical professionals in the preparation and handling of specimens, analyzing results, and maintaining laboratory equipment. Laboratory Technicians ensure accuracy, quality control, and adherence to safety protocols, contributing directly to scientific research, development of new products, or medical diagnostics. Roles & Responsibilities: • Performs routine laboratory procedures including specimen labeling, collection, processing, and shipping in accordance with established SOPs and/or study protocol under the supervision of the Laboratory Manager, Clinical Research Coordinator, Principal Investigator, and Sub-Investigators., • Operate and maintain laboratory equipment such as centrifuges, pipettes, and refrigerators/freezers., • Develop a strong working knowledge of the study protocols and flow chart of study procedures and implement study procedures in full compliance with protocol requirements., • Maintain accurate and timely documentation in laboratory or study-specific documents, temperature logs, and shipping logs., • Perform environmental monitoring and equipment temperature checks to ensure proper specimen storage conditions., • Assist with inventory management, restocking supplies, and maintaining organized work areas., • Ensure compliance with safety, quality, and regulatory standards (GCP and internal QA procedures)., • Support weekend and surge workload coverage as needed based on operational demands., • Assist Laboratory Manager in any task as needed. Education, Experience & Skills Required: • Associate or BS in biology, chemistry, or related area, or completion and certification of Lab Technician course from an accredited or allied health training school., • 1 year of experience in clinical research laboratory or related medical field., • Proficiency in laboratory techniques and laboratory equipment operation., • Good communication skills., • Excellent organization and planning skills. Salary: $18-$22/hour Frontage Laboratories Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Job Description Fette Kia in Clifton, NJ, is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Automotive Service Technician. This position is part of the Kia Veterans Technician Apprenticeship Program (VTAP), a structured apprenticeship program created by Kia America to help Military Veterans transition into the automotive industry. Through this program, participants gain hands-on dealership experience while completing a one-year competency-based apprenticeship that leads to Kia Service Technician certification. VTAP provides Veterans the opportunity to work full-time at a participating Kia dealership while receiving the training, tools, and support needed to develop into highly skilled automotive technicians. The program is GI Bill® approved, allowing eligible Veterans to receive Monthly Housing Allowance (MHA) during their apprenticeship. As an Automotive Technician Apprentice, you will work alongside experienced technicians and service professionals while developing the technical knowledge and practical skills necessary to diagnose, service, and repair Kia vehicles. Job Responsibilities • Diagnose, maintain, and repair Kia vehicles, including engines, transmissions, steering, suspension, brakes, HVAC, and electrical systems, • Perform vehicle inspections, diagnostics, and mechanical repairs using Kia diagnostic procedures and equipment, • Complete repair orders and warranty documentation according to Kia and dealership policies, • Test drive vehicles and verify repair quality using appropriate diagnostic tools and equipment, • Communicate effectively with service advisors and shop foremen to ensure a positive customer experience, • Maintain a safe, organized, and efficient work environment while following dealership safety procedures Requirements • Honorable Discharge from U.S. Military Service, • Valid driver’s license with a clean driving record, • Prior experience in a mechanical or technical field, • Strong troubleshooting and diagnostic skills, • Ability to work in a fast-paced dealership service environment, • Willingness to complete background check and drug screening Preferred Skills (Not Required) • Basic automotive maintenance or repair experience, • Familiarity with diagnostic tools and hand tools, • Experience working with engines, electrical systems, or mechanical equipment, • ASE certifications or technical training (a plus) Benefits Kia VTAP Apprenticeship Highlights • Full-time employment with a participating Kia Retailer, • A program designed specifically for Military Veterans, facilitated by Veterans, • Participation in a one-year, competency-based GI Bill®-approved apprenticeship leading to Kia Service Technician certification, • Eligible Veterans may receive a Monthly Housing Allowance (MHA) through the GI Bill® during the apprenticeship

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • Work Zone Safety The employee may also be required to accrue and/ or renew the following certifications at the discretion of the Department Head after the date of hire • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job Description Job Title: Controls Technician Job Description The Technician installs, starts up, commissions, and recommissions customer building automation systems that utilize direct digital control (DDC) technology across sites in New York and New Jersey. This role combines hands-on field work with software configuration to ensure HVAC and building automation systems operate reliably, efficiently, and according to design. The Systems Specialist also provides customer training, documentation, and ongoing support, while collaborating closely with project management, subcontractors, and other trades. This position offers strong growth opportunities, particularly in software and design engineering, for technicians who enjoy working with both mechanical and control systems. Responsibilities • Install, start up, commission, and recommission customer systems that utilize DDC technology, ensuring proper operation and performance., • Provide turnkey project delivery for small projects of approximately 80 or fewer budgeted hours, managing tasks from installation through commissioning and closeout., • Troubleshoot mid-level systems issues, diagnose problems, and implement effective solutions, or assist others in resolving system problems., • Collaborate with subcontractors and other trades on site to coordinate work and ensure integrated system operation., • Work with unitary systems such as VAV, FPB, and FCU units, as well as small air handling units (AHUs), basic chilled water/hot water (CW/HW) systems, and front-end systems., • Complete all required commissioning documentation accurately and on time, including test results and system configuration details., • Maintain accurate as-built drawing packages, marking and documenting all changes made during installation and commissioning., • Complete all required paperwork on time, including time sheets, expense reports, posting of work orders, on-site documentation, and project status reports., • Take responsibility for total system operation, from controllers to sensors, including loading software and verifying proper communication and control., • Set up system trends, alarms, and reports, and coordinate with customer IT personnel to ensure connectivity and proper network configuration., • Calibrate systems using basic electronic test equipment such as multimeters, network terminals, and laptop computers to verify accurate operation., • Perform mid-level static (stand-alone) commissioning of software programming to validate control logic and sequences of operation., • Conduct site-specific training for owners and operators on the total system, including system navigation, alarms, trends, and basic troubleshooting., • Set up operator workstations with all associated software and ensure users have appropriate access and functionality., • Perform job database backups on a daily basis or as directed, ensuring system configurations and programs are securely saved., • Assist with project turnover to the Service Department, providing documentation, system summaries, and support during handoff., • Communicate with the customer upon arrival and before leaving the work site, providing updates on work performed and next steps., • Track and record personal job progress, maintaining clear records and keeping the Project Manager informed of status and any issues., • Review customer systems and identify areas for improvement or scope issues, communicating these to the Project Manager for follow-up., • Keep project management apprised of customer concerns, issues, and potential risks that may affect schedule or performance., • Maintain a daily log of pertinent job-related activities, including work performed, issues encountered, and resolutions., • Adhere to safety standards at all times, demonstrating a high degree of regard for personal, employee, and subcontractor safety., • Maintain and troubleshoot personal laptops and mobile devices, ensuring they are properly configured for field networking and software use., • Apply a solid understanding of mechanical equipment operation and control sequences to verify correct system behavior and performance., • Support a positive, collaborative work environment by working effectively with team members, customers, and partners in the field. Essential Skills • Bachelor’s degree from a recognized college or university in building HVAC with a focus on building automation controls (3- or 4-year program)., • Field experience with installation and operation of building automation and Automated Logic Controls systems., • Ability to understand and navigate third-party control systems and integrations., • Experience troubleshooting HVAC and building automation systems in a field service or commissioning environment., • Proficiency with building automation software and tools, including Automated Logic and Phoenix software such as WebCtrl, SiteBuilder, ViewBuilder, LogicBuilder, InterOp 3.02, Alert, Draw, EDB, Eikon, Supervision, and Accel Works., • Strong understanding of mechanical systems and HVAC operation, including unitary systems (VAV, FPB, FCU), small AHUs, and basic CW/HW systems., • Working knowledge of TCP/IP networking concepts as they relate to building automation systems., • Ability to use electronic test equipment, including multimeters, network terminals, and laptop computers, for calibration and diagnostics., • Competence in software loading, configuration, and commissioning of DDC-based control systems., • Solid computer and networking skills to maintain and troubleshoot laptops and mobile devices used in the field., • Strong documentation skills, including as-built drawings, commissioning reports, and daily logs., • Effective communication skills to interact with customers, project managers, subcontractors, and IT personnel., • Ability to conduct site-specific training for owners and operators on building automation systems., • Commitment to safety and adherence to established safety standards on job sites., • Physical ability to climb ladders when needed to access building automation equipment and lift items up to 50 pounds. Additional Skills & Qualifications • Experience dealing with multiple simultaneous challenges that require knowledge across several disciplines (mechanical, electrical, controls, and networking)., • Familiarity with building automation systems and field service work in commercial or institutional environments., • Exposure to large-scale projects such as university campuses, telecommunications facilities, or multi-year building automation programs., • Interest in career growth into software engineering or design engineering roles within building automation., • Ability to modify and manipulate control software, including sequences of operation and logic changes., • Strong organizational skills to manage travel, scheduling, documentation, and expense reporting., • Self-motivated and comfortable working independently in the field while remaining aligned with project management direction., • Customer-focused mindset with the ability to identify system improvements and communicate value-added recommendations. Work Environment This is a field-based role covering territories in both New York and New Jersey, with current and upcoming projects along the I-78 corridor and as far south in New Jersey as areas such as Princeton and Asbury Park. Typical work hours are approximately 7:00 a.m. to 3:30 p.m., with no on-call shifts required for the installation group, though there may be opportunities to support other teams. Technicians typically travel directly from their homes to job sites rather than reporting daily to a central office. Team members use their own vehicles and receive reimbursement for mileage and out-of-pocket expenses such as fuel, tolls, parking, and related travel costs, subject to defined daily mileage limits. Over time, and upon transition to a full-time internal role, additional tools such as a company vehicle, electronic toll pass, and company credit card may be provided. The work involves regular visits to active construction and operational facilities, including universities and large commercial sites, where coordination with other trades, subcontractors, and customer personnel is essential. The role requires climbing ladders when necessary to access building automation units and lifting equipment or components up to 50 pounds. Technicians regularly use laptops, mobile devices, test instruments, and building automation workstations, and they interact frequently with mechanical equipment, control panels, and networked systems in mechanical rooms, plant spaces, and occupied buildings. The environment emphasizes safety, collaboration, and continuous learning, with strong opportunities for growth into software and design engineering within building automation. Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $30.00 - $40.86/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Jul 13, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionCompany Description Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description This position is responsible for performing lab tests on incoming/outgoing shipments and assists Supervisor with treatability studies. This position includes monitoring safety regulations and the use of equipment, initiating work orders for repairs of equipment and maintaining production logs and QC paperwork. Logging of test results in CORE waste management software. Primary Responsibilities: • Perform wet chemistry test on inbound/outbound load QC samples, • Perform PCB analysis on QC samples., • Maintain compliance and comply with Waste Analysis Plan (WAP),, • Complete and submit QC/QA documents to Operations., • File, electronically, the completed QC/QA document, • Review QC/QA test results to Waste profile Sheet to determine if results match profile., • Process (consolidate) waste samples into larger containers., • Package Samples to ship off site for testing., • Communicate off-specification materials to managers, • Conduct toolbox talks and area inspections, • Communicate with Lab QC Supervisor to accomplish daily goals, • Perform other reasonably related tasks as assigned by management Compensation for this position will range from $21-$24/hour DOE. Qualifications Basic Qualifications: • High school diploma or GED, • 1 or more years of prior experience working in a Laboratory, • Ability to wear company provided personal protection equipment including eye protection, steel toed shoes, lab coat, glove Preferred Qualifications: • Associates or Bachelor’s degree in Chemistry or an Environmental Sciences field, • 2 or more years as a Lab QC Technician, • Proficiency with Windows based programs (i.e. Excel and Word) Additional Information Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 24 hours; Observed Holidays – 2 floating days and 8 paid holiday; Vacation – 112 hours We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools, • Perform services, diagnostics, and repairs in a timely fashion while communicating with the shop foreman and service advisor to promote an optimal customer experience All potential employment opportunities presented and advertised within this site are with independently owned and operated Kia Retailers. Applicants who seek employment through this site are applying for full-time employment with a participating Kia Retailer and not with KUS or ERS. All employment opportunities listed within this site are subject to applicable Federal and State statutes, rules, and regulations governing employment, which apply to each individual Kia Retailer’s specific location. KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required, • Must be willing to complete and pass drug screening and background checks Benefits Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job DescriptionCompany Description Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Pay range: $ 26-31/hour DOE Hours: Hours can be 8-430 or 9-530 Job Description The Environmental Technician III is a key position in supervising that the details of everyday production are executed through effective communications within the team and outside teams, departments, etc. Primary Responsibilities (Essential Functions): · Supervise segregation and packaging material for process along with the completion of required paperwork in a legible, accurate, and timely manner in accordance with appropriate regulations and Clean Earth policies, practices, and procedures · Separate and pack hazardous material for transport · Complete required paperwork in accordance with our practices and procedures · Collecting samples of inbound waste for laboratory analysis · Performs other reasonably related duties as assigned by management. Qualifications Qualifications Ability to wear company provided personal protection equipment including eye protection, steel toed shoes, hard hat, gloves, Tyvek coveralls, and respirator. High School diploma or General Educational Development (GED) required · Must be 18 years of age or older · 2+ years of prior experience working with hazardous materials · Have the ability to read, write and speak in English · Ability to operate equipment, including a forklift and pallet jack Preferred Qualifications: · 2+ years of experience sampling and receiving hazardous waste · Has the ability to operate a powered industrial truck, e.g., forklift and possesses safe driving record. · Proficiency with Windows based programs (i.e. Excel and Word · Demonstrates knowledge of Hazardous Materials and OSHA Regulations · Knowledge of OSHA, DOT, and RCRA Regulations · Bachelor’s degree in chemistry, Environmental Science, Biology or related field Additional Information Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 24 hours; Observed Holidays – 2 floating days and 8 paid holiday; Vacation – 112 hours We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law Military veterans encouraged to apply.

Job DescriptionCompany Summary EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. The In-Home Services field professionals lead all field operations and thousands of technicians across nearly 100 facilities across the country. Devoted to building a collaborative and committed group of employees who manage inventory, fleet and performance - IHS is the driving force that connects our customers with the industry’s best products and services for DISH. Job Duties and Responsibilities Field Resource Coordinators are key players in helping our technicians and our company reach their goals. We are responsible for ensuring that our technician resources are able to service our customers as quickly and efficiently as possible. This is done through day-of route changes and customer appointment scheduling adjustments. Key Responsibilities: • Communicating in real time with In-Home Service Professionals about any issues and the resulting changes to the routing, • Working with technicians to accommodate same day customer appointments, • Tracking and communicating appointments’ progress with field management, • Referring and assigning additional jobs to external subcontractors, • Answering incoming customer calls that arise and handling/transferring appropriately, • Remaining sharp; different tasks are done throughout the day that require significant attention and accuracySkills, Experience and Requirements Education and Experience: • Bachelor's degree from a four year college or university is a plus; or a combination of education and experience Skills and Qualifications: • Be an advocate for our customers; have the drive to build your knowledge of the tools and resources to provide best-in-class customer service, • Effectively communicate, both written and verbally, with all levels of the organization, • Appropriately organize, prioritize, and monitor tasks for effective and efficient work completion, • Adjust to changing responsibilities and priorities in a fast paced, growth-oriented, and time-critical environment, • Have the drive to learn and master DISH’s workforce management (WFM) and customer relationship management (CRM) software, • Spanish bilingual is a plus What’s in it for you? • $24.85 /hour, • Great promotional opportunities, • Comprehensive benefits package including discounted DISH Network services, paid time off, medical, dental, and vision insurance, 401K, employee stock purchase program, and tuition reimbursement Visa sponsorship not available for this role Benefits We offer versatile health perks, including flexible spending accounts, HSA, a 401(k) Plan with company match, ESPP, career opportunities, and a flexible time away plan; all benefits can be viewed here: EchoStar Benefits. The base pay range shown is a guideline. Individual total compensation will vary based on factors such as qualifications, skill level, and competencies; compensation is based on the role's location and is subject to change based on work location. Candidates need to successfully complete a pre-employment screen, which may include a drug test and DMV check. Our company is committed to fostering an inclusive and equitable workplace where every individual has the opportunity to succeed. We are dedicated to providing individuals with criminal or arrest records a fair chance of employment in accordance with local, state, and federal laws. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact leaves@dish.com if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish)

Job Description Preview Family-owned Toyota dealership in Wood-Ridge, NJ seeking motivated individuals to start a long-term automotive technician career. $20/hour starting pay, paid training, internal promotions, and a clear path to union eligibility and advancement. This is an entry-level position designed as the starting point of a long-term technician career, with pay growth, training, and a path to union membership upon certification and advancement. About the Dealership We are a family-owned Toyota dealership located in Wood-Ridge, NJ, with significant employee tenure and a proven track record of promoting from within. Many of our current union technicians began their careers in entry-level positions. We believe in hiring individuals with strong work ethic and ambition, then investing in their development through training, certifications, and mentorship. Position Overview The Quick Lube / Entry-Level Technician role is the first step in a clearly defined automotive technician career path. While this position does not begin as a union role, motivated individuals can become eligible for union membership once they advance into a certified technician position. This opportunity is ideal for humble, hungry, and ambitious individuals who want to learn, earn more as they develop skills, and build a long-term career in the automotive field. What This Role Leads To With training, certification, and strong performance, this role can progress to: • Mid-Level Automotive Technician, • Toyota-Certified Technician, • Union Technician status upon qualification, • Long-term career growth within our service department Advancement is performance- and certification-based, not time-based. Key Responsibilities • Perform oil changes, tire rotations, and basic maintenance services, • Conduct multi-point vehicle inspections, • Assist and learn from senior technicians, • Maintain a clean, safe, and organized work environment, • Follow Toyota and dealership service procedures, • Learn shop tools, systems, and systems Training, Pay Growth & Career Advancement • Starting pay: $20 per hour, • Paid on-the-job training, • Toyota factory training opportunities, • Support and funding for ASE and Toyota certification advancement, • Pay increases tied to skill development, certifications, and advancement, • Clear path to Mid-Level Technician and union eligibility Compensation & Benefits • $20/hour starting pay, • Paid training and continued education, • Stable, full-time schedule, • Opportunity for significant pay growth as skills increase, • Union eligibility once qualifications and position requirements are met Who We’re Looking For • Strong work ethic and reliability, • Willingness to learn and grow, • Positive attitude and professionalism, • Ambition to build a long-term automotive career, • Mechanical aptitude is helpful but not required Why Join Us Family-owned dealership with long-tenured employees • Proven promote-from-within culture, • Structured career progression and mentorship, • A real career path — not just a job If you’re motivated, dependable, and ready to start a career with real growth potential, we want to hear from you.

Job Description HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer’s need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are seeking a skilled NDT Level II Technician to perform MFL, UT, MT, LT/BT, and PT inspections in accordance with industry codes and customer requirements. This role involves data collection, maintaining safety standards, and ensuring positive client and team relationships. Essential Duties and Responsibilities • Skills and knowledge to interpret NDT requirements, codes, and standards required by contract., • Must be able to perform the following NDT Methods: Magnetic Flux Leakage (MFL), Ultrasonic (UTT) Testing, Magnetic Particle (MT) Testing, Vacuum Box (LT/BT) Testing and Penetrant (PT) Testing., • Collect and process data created by the inspections, in accordance with the HMT and customer’s procedures and requirements., • Drive a vehicle safely in an oil and gas facility and field sites., • Be proficient with standard computer software (such as MS Word and Excel)., • Maintain a positive relationship between client, facility and customer; and promote a positive attitude towards coworkers., • Ensure that all HMT safety policies and procedures are being followed., • Clean driving record, • Must pass DISA background and drug and alcohol screen, • Current Driver’s License from state of residence, • Able to lift and carry a minimum of 50 lbs., • Willingness to Travel up to 75%+ Required Qualifications & Education • Must be able to pass HMT certification standards Additional certifications desired, but not required are: • Certifications in AMMFL, ACFM, SLOFEC are a plus., • Passport is a plus., • Proficient in Microsoft Office applications including Word and Excel., • TWIC Card, • Self‐motivated with good written and verbal communication skills with a positive team‐oriented attitude is required., • Trained in OSHA 10 and or OSHA 30, • Respirator fit tested (current), • Current CPR & First Aid HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Description Utility Locator (Field Technician) Starting pay $20.00! More than a Job! Stake Center Locating is hiring entry level Locate Technicians to locate underground utilities, troubleshoot, and mark the ground (using paint and flags), promoting damage prevention in your community. We will train you on the job and equip you with the basic skills to be successful in our 100% paid training. What you’ll need to bring is a preference to work outdoors in all weather, a desire to work independently and an ability to problem solve with speed and accuracy. What We Offer: Since 1997, we have been on a mission to make Stake Center a great place to work. We have been working with our locators to make Stake Center the company of choice. What we offer: • Pay Rate: $20.00 per hour., • We provide late-model vehicles with a fuel card that allows you to avoid high gas prices on your daily commute. In fact, you take the vehicle home every night (for company use only)!, • PTO and paid Holidays – best in class, • We are providing vouchers that can be used on 300+ types of Red Wing safety shoes (a total of $200 after every twelve months of service)., • 401(k) with company match Key Responsibilities: We will train entry level Locating Technicians to: • Think Safety First!, • Use a laptop computer to receive, document and process tickets and email., • Read maps, interpret blueprints, and determine the best method & sequence for locating., • Use provided locate equipment & technology to accurately locate underground utilities., • Communicate effectively with peers, managers, and homeowners. Qualifications: • Eighteen years of age or older., • High school diploma or equivalent., • Valid driver license with an acceptable driving record., • Ability to walk up to 5 miles a day 2-3 times a week., • Ability to carry up to 5 lbs of electronic locating equipment for extended periods of time; lifting objects up to 25 lbs or lifting in excess of 75 lbs with tool aids., • Pass pre-employment background and drug screening. Schedule: • Will need to have the ability to work a flexible schedule (some evenings, weekends, and an occasional Holiday) as ticket/production load requires., • Employees will respond to emergency calls during scheduled on-call shift rotation. We understand what is at stake for our employees, our customers, and our customers’ customers. That is why we continually invest in our people, equipment, and technology. To us you are a professional - this is a career not just a job!

Job DescriptionJob Description Electronics Technician 100% Travel | United States | Full-Time Position Overview Crown is seeking a highly motivated and skilled Electronics Installation/Disposition Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries. This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, network, and supporting systems. The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field. Key Responsibilities Electronic System Installation & Integration • Install, configure, align, test, FAA related equipment to include but not to be limited to communication systems, voice control system, and systems as assigned, • Setup and support electronic/networking equipment, • Connect and integrate Telco requirements including Commercial Telco, Field Cable, Fiber Optics, and VOIP communications, • Install new radio racks, radios, and other Government/Vendor Furnished Equipment, • Remove and properly dispose of legacy communications equipment, and create dispensation documentation, • Perform baseline electronic readings and generate required documentation to satisfy customer/FAA requirements, • Perform electronics testing procedures and coordinate frequency outages Infrastructure & Physical Buildout • Mount and install antennas, • Run and terminate coaxial cables and other communication cabling, • Install and test grounding systems and implement surge protection measures, • Perform basic electrical wiring and connections, • Install and assemble equipment racks, cable trays, and electrical conduit, • Ensure proper infrastructure to support the communication system Engineering, Compliance & FAA Interface • Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams, • Follow provided engineering packages and participate in required field modifications, • Participate in pre-installation meetings, • Interface with FAA Air Traffic and Technical Operations during installations, • Work confidently in geographically isolated environments and create solutions to unique on-site challenges, • Provide guidance and support to other installation and construction crew members, • Communicate effectively with team members, management, and stakeholders, • Understand the practical implications of electrical and electronic circuitry Required Technical Experience • Demonstrated experience installing and maintaining electronic communication and networking equipment, • Familiarity with FAA National Airspace (NAS) communications and networking systems, cabling, and equipment, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel) Minimum Required Qualifications • Must be a U.S. Citizen, • Must possess a valid driver’s license, • Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system, • Must be able to obtain a federal background screening security, • Ability to generate required documentation, • Understanding of Telco and networking equipment including Commercial Telco, RCL, Field Cable, VOIP, and Fiber Optics Physical & Work Environment Requirements • Ability to stand, sit, crouch, and work in one position for extended periods, • Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack, • Ability to climb and work at heights exceeding 60 feet, • Ability to occasionally perform work under severe time restraints, • Must be in good physical condition and able to pass a physical fitness assessment if required Schedule & Travel Typical schedule is Monday through Friday Must be able to work non-standard hours depending on site requirements. This is a 100% travel position. Compensation Hourly Rate Range: $20.00 to $49.00 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • 401K with company match, • Comprehensive medical, dental, and vision plans, • Generous PTO About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC area. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description RVE (an Ardurra company) is seeking a Construction Inspection Manager to join our team in Secaucus, New Jersey. RVE’s (an Ardurra company) team members have more than jobs—they work on projects that help our clients solve problems and build better communities. We are people-focused and community driven. The work we do for our clients directly improves the lives of the community around us. Primary Function: The Construction Inspection Manager is a proven team leader in the construction field and has over 15 years of experience in Civil and Infrastructure construction projects. The individual’s experience should be in overseeing and managing both projects and a team of construction inspectors and contract administrators. This position is a supervisory and construction management role and will be directly responsible for all construction operations for the Secaucus Regional Office. This individual will manage and supervise a staff of construction inspectors and will collaborate with engineering project managers and administrative staff. This position will report directly to the Regional Manager. Supervised staff shall be responsible for successful inspection and contract administration of a diverse variety of projects. Such projects shall include the rehabilitation and replacement of municipal roads, underground utilities (drainage, sanitary sewer systems, combined sewer systems, potable water systems), park and recreational facilities, private land development. This individual will also collaborate with other company inspection managers for occasional overlap with water/wastewater projects and vertical/building projects. Primary Duties: • Design to construction phase transition coordination with design team including constructability reviews during design phase and assumption of project responsibility from preconstruction conference through project close-out., • Responsible for project construction phase planning, staff assignments, coordination with other departments and offices to balance dynamic construction scheduling needs (resource planning) and hiring., • Continued quality control of all payment certifications., • Lead and promote daily communication across Inspection teams and timely communication with design team and clients as needed., • Identify, scope and administer field changes for unforeseen conditions including change order cost and schedule negotiation., • Mentorship for inspection team., • Implement staff development protocols, including skills training and certifications, • Application and enforcement of company policies, • This is a full-time supervisory position of a construction inspection team Education and Experience Requirements: • Leadership, • Excellent oral and written communication skills, • Proactive and organized, • Proficient with inspection software, Microsoft Office Suite and related programs, • Two-year technical or associate’s degree in construction technology or construction management are a plus., • Bachelor’s Degree a plus, • OSHA Certifications 10/30 preferred, • NICET Certifications I, II, III preferred, • ACI - Field Technician Certification preferred, • New Jersey Society of Asphalt Technicians - Field Testing preferred, • NJDOT - Traffic Control Coordinator preferred, • Work Zone Safety preferred, • Confined Space Training preferred Salary Range: The salary range for this role is $94,000 - $122,200 annually. Benefits: Medical, dental, vision, 401(k), Paid Time Off Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HM1

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools, • Perform services, diagnostics, and repairs in a timely fashion while communicating with the shop foreman and service advisor to promote an optimal customer experience All potential employment opportunities presented and advertised within this site are with independently owned and operated Kia Retailers. Applicants who seek employment through this site are applying for full-time employment with a participating Kia Retailer and not with KUS or ERS. All employment opportunities listed within this site are subject to applicable Federal and State statutes, rules, and regulations governing employment, which apply to each individual Kia Retailer’s specific location. KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required, • Must be willing to complete and pass drug screening and background checks Benefits Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal® is hiring an Engineering Manager. The Engineering Manager leads pre‑ and post‑field support engineering teams across system design, project delivery, and operational support. Serving as the primary customer-facing technical escalation, this role ensures on-time, compliant project execution while providing strong people leadership and fostering effective cross‑functional and client partnerships. RESPONSIBILITIES: • Manage, mentor and schedule a small team of field support pre and post engineers, handle performance reviews, career development and resource allocation., • Coordinate with Installation teams on the execution and delivery of infrastructure and systems projects across network, video, database and security domains (physical security, access control, CCTV, intrusion detection, and logical/security appliances)., • Supervise the quoting, RFI, RFP and engineering RFC processes for all projects, encompassing technical documents, drawings, scopes of work, and specifications; ensures compliance with the requirements of the prime contract and meets company standard processes, • Develop and maintain project plans, budgets, milestones, and technical requirements; coordinate with third-party vendors, integrators and contractors as needed., • Maintain documentation: runbooks, SOPs, topology, security diagrams, change logs and project deliverables., • Act as customer-facing technical lead for outages, escalations and project status — communicate progress, risks, mitigation plans and timelines to stakeholders and clients., • Review system design and component compatibility; exercise cost analysis procedures and value engineering for components in the project, creating opportunities for cost reduction and margin increases QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of five (5) years of management or supervisory experience, • Minimum of five (5) years hands-on experience with servers and enterprise network infrastructure with three (3) years managing projects or teams, • Extensive experience with relational databases (e.g., MySQL, PostgreSQL, MS SQL) including performance tuning, backup/recovery and HA, • Strong customer-facing experience, including presenting technical content to non-technical stakeholders and managing clear, timely incident communications, • Demonstrated project management capability, including managing multiple projects while overseeing schedules, risks, scope, and vendor deliverables, • Ability to manage competing priorities in a dynamic, team-oriented environment while developing trusted, collaborative relationships across internal teams, vendors, and executive-level clients PREFERRED QUALIFICATIONS (NICE TO HAVE): • Bachelor’s degree in computer science, Information Technology or related field, • Supervisory experience in construction or operations, • PMP, PRINCE2, or equivalent project management certification, • Network certifications (CCNA/CCNP/CCDA), security certifications (CISSP, CISM, CompTIA Security+), database certifications (Oracle, Microsoft, PostgreSQL) and/or AV certifications (CTS)., • Experience with cloud networking, cloud-hosted databases and cloud security (AWS, Azure, GCP), • Experience with ITSM/incident management tools (ServiceNow, Jira) and various physical security integration platforms BENEFITS: • Salary: $100,00 - $125,000 annually + bonus potential, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1609939

Job DescriptionBenefits: • Bonus based on performance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Profit sharing, • Training & development Reports To: Mitigation Manager What does a Mitigation Technician with Paul Davis do? • Serve others within your community in their time of need, • Make a difference for others that have had a disaster strike their property, • Work hard and take pride in completing projects (i.e. mitigating flood and fire damage), • Be empathetic and show a sense of urgency while communicating through modern technologyWhy Join The Team? Paul Davis is an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. We are growing locally and have career opportunities for individuals who want purpose out of their work. We love creating an opportunity for our team members, providing industry training and giving technicians the opportunity to become experts in the field through certifications and Paul Davis University. Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider our Mitigation Technicians are on the front lines of restoring their communities by being first on site after disasters strike (i.e. floods, fires) and will be leading the mitigation effort to restore the property. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why The Team Needs You? Serving others after a disaster has struck their property is not easy. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail and love to help people. It is challenging to make customers happy when faced with a traumatic event but you will love being a technician if you take pride in your work and have fun while working with others. Team Compensation and Benefits: • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time., • Paid training, • Health, dental and vision insurance, • Bonus program for performance, • Referral program, • Great culture and team dynamic Team Qualifications (Requirements): • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Fluent in English, • Valid driver's license with a clean record, • Have the ability to work nights/weekends and overtime, if needed, • Ability to lift 75 LBS frequently, • Desire to continually learn new things Role on the Team (Job Responsibilities): • High level performance of water mitigation, tarping, board up, mold remediation, asbestos/lead abatement and carpet cleaning/reinstallation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager., • Focus and dedication to providing excellent customer service., • Maintain a clean, properly stocked and organized truck and maintain all company equipment., • Be accessible by phone and participate, as necessary, in the on-call schedule., • Assist in warehousing and facility related tasks when necessary., • You will assist other team members as you see opportunities arise and be a leader for the team when needed. Please apply if you think you have what it takes to serve others and deliver a world-class service when others need it the most. We are looking forward to discussing this opportunity with you. We support and hire Veterans and we are an Equal Opportunity Employer!

Job DescriptionSalary: $18 to $22 per HR Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success! We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the NY Metro area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various businesses including retail, hospital, and educational institutions, looking for strong communication skills and enjoyment of working with the public. All training provided by the company. Please email resume to jobs@beveragesystems.org Benefits Offered: • Medical, dental and vision, • Retirement, • EAP Benefits, • Paid-Time-Off, • Company cell phone Here is a brief description of the job: The Technician will professionally diagnose, restore, and repair beverageequipment throughout the day.Responsible for properly installing, repairing and maintaining field beverage equipment. Must represent the company and its customers in a professional manner. Maintain an acceptable level of productivity related to the amount of completed calls. Primary Responsibilities: • Perform installations, repairs and maintenance on commercial beverage and related equipment at our customers location., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform mechanic skills including, but not limited to, mechanical, electrical, plumbing, troubleshooting and repair of beverage equipment., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Demonstrate proper knowledge of equipment. Communicate with the supervisor when extra training may be needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with regulations and maintain a clean and orderly work area., • Conduct yourself in a professional manner at all times while treating customers, driving company vehicles, etc. Treat others how you would like to be treated, • Fill out field service reports properly, legible and with as much information as possible. When eligible., • Maintain frequent communication with the dispatcher to assure that the right information is relayed and entered into our system., • Maintain company vehicles in good working condition, both mechanically and organized., • Arrange for company vehicles to get routine maintenance and any required service. Make sure proper documentation is kept up-to-date and kept in company vehicles at all times.All repairs and service on vehicles covered by the company through our fleet management company., • Fulfill all new and existing training requirements as set by service managers and/or technician development directors., • Must be able to cover emergency calls on weekends on a rotating basis as laid out by the manager to satisfy the market needs., • Other duties as assigned. Qualifications & Requirements: • Must be able to maintain a valid driver's license., • Clean Driver Record, • Occasional Weekend Availability, • Must have some electrical troubleshooting knowledge., • Be able to read volts, amps, ohms and continuity on multimeters., • Must have some plumbing knowledge., • Must provide your own general tools. Specialty industry tools provided to the technician on loan by the company. Working Conditions: Work includes long distance driving. Occasionally lifting of machinery and/or items that may exceed 75 lbs. Must be able to work overtime as requested by management, within reason. If you want to be a part of a growing family business who has a passion for their employees and their customers please email resume to jobs@beveragesystems.org

Job Description Munich Airport NJ LLC, the U.S.-based subsidiary of Munich Airport, supports operations, maintenance, and concession management at Newark Liberty International Airport (EWR) Terminal A. Engineering Student Internship This is a paid internship for the Summer 2026 semester. Join our Facilities Management team at Newark Liberty International Airport’s Terminal A and help advance a world-class asset management program in a fast-paced airport environment. In this role, you will support initiatives that strengthen preventive and predictive maintenance, improve data quality, and enhance reliability through Maximo, our computerized maintenance management system (CMMS). You will gain hands-on experience applying engineering principles to real operational challenges while working alongside professionals who maintain critical terminal infrastructure. Hours are flexible to accommodate your class schedule. Your duties/responsibilities Support the development and optimization of preventive maintenance programs, task plans, and schedules to improve asset reliability and performance Assist in creating and improving standard operating procedures and maintenance documentation to increase quality, consistency, and execution readiness Analyze maintenance routes and workflows to reduce travel time, improve technician productivity, and support efficient terminal operations Identify gaps in maintenance effectiveness and recommend data-driven improvements based on asset history, failure trends, and operational priorities Contribute to predictive and condition-based maintenance strategies using performance indicators, trends, and equipment condition data Support data standardization and improve the use of information from CMMS, HMI, and SCADA systems to strengthen maintenance planning and asset management decisions Your skills & experience Currently enrolled in a 4-year college or university pursuing a bachelor’s degree, with an expected graduation between December 2027 and July 2028. Pursuing a degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related field, with a GPA of 3.2 or higher preferred. Demonstrated ability to succeed in a professional, fast-paced environment through internships, part-time work, research, volunteering, student leadership, or other relevant experience. Legally authorized to work in the U.S. on a full-time, permanent, and ongoing basis without current or future sponsorship requirements. Strong analytical skills and an interest in applying engineering principles to maintenance, reliability, and asset performance challenges. Highly organized, detail-oriented, and able to manage multiple priorities with care and consistency. Comfortable using Microsoft Office tools; familiarity with CMMS, data analysis, or visualization tools is a plus. Why join our airport team Work on meaningful projects that support the reliability, safety, and day-to-day performance of a major airport terminal Gain hands-on experience with industry-recognized asset management practices, digital maintenance tools, and a collaborative team shaping a world-class passenger experience The base salary for this role is $21.25 per hour. You will learn a wealth of information about the aviation industry and airport operations while here, and if this internship goes full-time, additional benefits such as medical, dental, vision, and 401(k) will be offered! Total compensation, including base salary to be offered, will depend on elements unique to each candidate, including candidate experience, skills, education and other factors permitted by law. Munich Airport US Holding and its subdivision Munich Airport NJ LLC are equal opportunity employers. Munich Airport NJ LLC Terms and Conditions: 1. MANJ will only contact you via SMS to follow up on job applications and schedule interviews., 2. You can cancel the SMS service at any time. Just text "STOP" to the short code. After you send the SMS message "STOP" to us, we will send you an SMS message to confirm that you have been unsubscribed. After this, you will no longer receive SMS messages from us. If you want to join again, just sign up as you did the first time and we will start sending SMS messages to you again., 3. If you are experiencing issues with the messaging program you can reply with the keyword HELP for more assistance, or you can get help directly at {support email address or toll-free number}., 4. Carriers are not liable for delayed or undelivered messages, 5. As always, message and data rates may apply for any messages sent to you from us and to us from you. You will receive {message frequency}. If you have any questions about your text plan or data plan, it is best to contact your wireless provider., 6. If you have any questions regarding privacy, please read our privacy policy below. Privacy Policy: We collect your mobile number and related opt-in data for the delivery of SMS messages. Your mobile opt-in data and consent will not be shared with third parties or affiliates for marketing or promotional purposes. Powered by JazzHR Rih6FKcjb3

Job DescriptionNow Hiring: Full-Time Industrial Electro-Mechanical Technician Join our growing team as an Industrial Electro-Mechanical Technician and play a vital role in keeping our production facility operating safely and efficiently. We are seeking a skilled, hands-on maintenance professional with strong mechanical and electrical troubleshooting abilities who enjoys working in a fast-paced industrial environment. This is a full-time position with a regular schedule of 40+ hours per week, including opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You'll Do As an Industrial Electro-Mechanical Technician, you'll be responsible for maintaining, troubleshooting, repairing, and optimizing the equipment that keeps our industrial laundry operation running at peak performance. You'll perform preventive maintenance, diagnose mechanical and electrical issues, and respond quickly to equipment breakdowns to minimize downtime. You'll work on a variety of industrial systems and equipment, including: • Industrial washers and dryers, • Ironers and finishing equipment, • Conveyor systems, • Boilers and steam systems, • Air compressors, • Electrical, mechanical, pneumatic, and hydraulic systems Your expertise will help maximize equipment reliability, improve operational efficiency, and support a safe, productive work environment. What You'll DoKey Responsibilities • Diagnose and Repair Equipment: Troubleshoot and repair electrical, mechanical, pneumatic, hydraulic, and steam systems. Identify root causes of equipment failures and perform corrective repairs with minimal supervision., • Electrical & Controls: Read and interpret electrical schematics, wiring diagrams, and ladder logic. Install, troubleshoot, and maintain electrical systems and control wiring up to 480V three-phase. Perform maintenance on motors, motor controls, VFDs, PLCs, sensors, and electrical circuits., • Preventive Maintenance: Perform scheduled preventive and predictive maintenance on industrial washers, dryers, ironers, conveyors, boilers, air compressors, pumps, motors, PLC-controlled equipment, and other production machinery to maximize equipment reliability., • Industrial Systems: Maintain and troubleshoot pneumatic, hydraulic, compressed air, steam, and boiler systems. Repair and replace various water and air pumps, valves, cylinders, bearings, belts, chains, and related mechanical components., • Equipment Documentation: Accurately document maintenance activities, work orders, parts usage, and equipment history within the Computerized Maintenance Management System (CMMS)., • Safety & Compliance: Follow all company safety policies and OSHA requirements, including Lockout/Tagout (LOTO), arc flash procedures, and safe work practices. Participate in safety inspections and continuous improvement initiatives., • Continuous Improvement: Identify recurring equipment issues and recommend improvements that increase reliability, reduce downtime, and improve production efficiency., • Project Support: Assist with equipment installations, facility expansions, renovations, machinery upgrades, capital improvement projects, and equipment commissioning., • Team Collaboration: Work closely with operations, engineering, and maintenance personnel to resolve equipment issues efficiently. Provide guidance and on-the-job training to less experienced technicians as needed., • Equipment Standards: Maintain all equipment in accordance with manufacturer specifications and company maintenance standards., • Material Handling & Mobility: Safely operate forklifts, scissor lifts, and other maintenance equipment. Work comfortably at heights, outdoors in varying weather conditions, and travel occasionally between facilities when required.QualificationsQualifications, • Must be at least 18 years of age., • Associate degree, technical diploma, or trade certification in Electro-Mechanical Technology, Industrial Maintenance, Industrial Electronics, Mechatronics, or a related field preferred. Equivalent hands-on experience will be considered., • 3–5 years of industrial maintenance experience in a manufacturing, production, or industrial environment., • Strong working knowledge of electrical and mechanical systems, including AC/DC motors, motor controls, VFDs, control panels, and 480V three-phase electrical systems., • Experience troubleshooting and maintaining PLC-controlled equipment, with the ability to read and interpret ladder logic., • Proficient in reading and interpreting electrical schematics, wiring diagrams, P&IDs, and mechanical drawings., • Working knowledge of pneumatic, hydraulic, steam, compressed air, and boiler systems., • Experience using a Computerized Maintenance Management System (CMMS) is preferred., • Knowledge of Lockout/Tagout (LOTO) procedures and NFPA 70E electrical safety standards., • Ability to lift up to 50 pounds and work in industrial environments that may include heights, confined spaces, varying temperatures, and outdoor conditions., • Must possess strong troubleshooting, problem-solving, and communication skills with the ability to work independently and as part of a team.BenefitsCompensation & Benefits, • Competitive hourly pay based on experience, technical skills, and qualifications., • Excellent work-life balance with a 4-day workweek and opportunities for overtime., • Paid time off (PTO) and paid holidays., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with a generous company match., • Company-paid life insurance and long-term disability coverage., • Company-provided uniforms., • Ongoing training and professional development opportunities., • Clear career advancement opportunities, including a defined pathway to Technician III and other leadership roles.Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a highly skilled and hands-on Electrical Technician to support the Electrical Distribution team in the construction, installation, and testing of electrical systems for the Eos Stellarator. The successful candidate will work directly alongside Senior Power Systems Engineers, Power Electronics Engineers, and Hardware Design Engineers to bring advanced power concepts from design to reality. This role requires a versatile technician who can seamlessly transition between supporting the build of high-current power supplies , assembling electrical distribution panels, and executing the physical installation of facility infrastructure. The technician will play a critical role in the hardware bring-up, debugging, and overall electrical integration of a cutting-edge fusion energy system.Key Responsibility Areas:• Assembly & Prototyping: Build and wire power supplies, energy storage systems, custom embedded control boards, and high-current AC-DC converters for HTS magnets. • Infrastructure Installation: Support the physical installation and cabling of MV/LV switchgear, transformers, distribution panels, and Battery Energy Storage Systems (BESS)., • Facility Support: Assist in integrating auxiliary electrical systems and balance-of-plant (BoP) infrastructure, providing electrical connections for cryogenics, vacuum, cooling, and HVAC systems., • Testing & Validation: Set up testbeds and perform hardware bring-up, signal probing, and parameter optimization under staged load conditions., • Hardware Debugging: Perform board-level debugging, soldering, and rework on custom printed circuit boards (PCBs)., • Documentation: Read, interpret, and provide field markups for single-line diagrams, schematics, wiring diagrams, and cable schedules.Ideal Experience & Skillsets: Required Qualifications • Associate’s degree, trade school certification, or equivalent practical experience in Electrical Technology, Electronics, or a related field., • 5+ years of hands-on experience as an electrical technician in industrial, R&D, or high-power environments., • Proven experience building, wiring, and installing electrical distribution panels, power supplies, and control cabinets., • Strong ability to read and interpret engineering drawings, including schematics, P&IDs, and single-line diagrams., • Proficiency with lab measurement tools, including oscilloscopes, multimeters, and electronic loads., • Strong understanding of strict electrical safety standards, including LOTO protocols and NFPA 70E / NEC. Preferred Qualifications: • Experience operating in fusion, accelerator, or specialized industrial R&D environments., • Familiarity with high-voltage and medium-voltage distribution equipment (transformers, protective relays, switchgear)., • Hands-on experience with PCB rework, fine-pitch soldering, and analog/mixed-signal circuit troubleshooting., • Familiarity with mechanical integration, including cable trays, conduit bending, heat sink layouts, and cooling solutions. Tools & Platforms • Measurement & Lab Tools: Oscilloscopes, multimeters, power analyzers, signal generators, logic analyzers, and electronic loads., • Assembly Tools: Soldering stations, crimpers, wire strippers, and general hand/power tools for mechanical integration., • Documentation: Microsoft 365, SharePoint, JIRA, and familiarity with navigating CAD outputs (AutoCAD Electrical, EPLAN). Company Benefits: • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job Description As an HVAC Service Manager, you will be responsible for overseeing and coordinating our service department to ensure the efficient and effective delivery of HVAC services. You will play a pivotal role in managing service technicians, assisting the dispatcher with scheduling, coordinating installations, and maintaining high standards of customer service. Key Responsibilities: • Manage a team of HVAC service technicians, providing leadership, guidance, and support to ensure optimal performance and productivity., • Assist the dispatcher with scheduling service technicians to customer locations for repair, maintenance, and installation jobs in a timely and efficient manner., • Monitor and prioritize service requests, ensuring that customer needs are met promptly and effectively., • Locate and order parts as needed for field staff., • Research and locate service manuals or troubleshooting instruction for a variety of equipment as needed. You will communicate with the field technicians directly and assist them as needed from the office., • Conduct regular performance evaluations of service technicians, providing feedback and coaching to enhance skill levels and job performance., • Oversee the implementation of safety protocols and ensure compliance with industry regulations and company policies., • Handle customer inquiries, complaints, and escalations, resolving issues promptly and professionally to ensure customer satisfaction., • Check technician notes for accuracy at the end of the day and directly communicate with field staff to ensure jobs are properly completed., • Develop and implement process improvements to enhance the efficiency and effectiveness of service operations. Qualifications: • Proven experience in HVAC service management, with a minimum of 3 years of experience in a similar role., • Strong technical knowledge of HVAC systems, including troubleshooting, repair, and installation procedures., • Excellent leadership and communication skills, with the ability to motivate and inspire a team., • Proficiency in computer software applications, including Microsoft Office and HVAC service management software., • Solid understanding of safety regulations and protocols related to HVAC service operations., • Exceptional customer service skills, with a commitment to delivering a positive customer experience., • Valid driver's license and clean driving record. HVAC certification or relevant trade qualifications preferred. Job Type: Full-time Pay: $50,000.00 - $130,000.00 per year Benefits: • 401(k) 4% Match, • Company truck, • Paid time off, • Tools provided Schedule: • 8 hour shift, • Monday to Friday, • Overtime, • Weekends as needed, • Year round work Supplemental pay types: • Overtime pay Work Location: In person

Job DescriptionDescription: KS Engineers (KSE) is a mid-size engineering and surveying firm ranked among the leaders in design services. With seven offices across New York, New Jersey, Pennsylvania, and Connecticut, we have been delivering transportation and public infrastructure design and survey services for more than 35 years. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Survey/CAD Technician Reporting to – Department Manager Duties and Responsibilities: • Assist with survey-related projects using CAD tools, • Work independently and collaboratively within project teams, • Ensure accuracy and attention to detail in all deliverables Requirements: Requirements and skills: • High school diploma: some college coursework preferred, • CAD certification, • Previous experience as a Survey/CAD technician, • Strong attention to detail and time management skills, • Excellent communication skills Physical requirements: • Ability to work in both office and field environments, • Prolonged standing and walking during field operations, • Frequent walking on uneven terrain, slopes, and construction sites, • Regular bending, kneeling, crouching, squatting, and reaching, • Ability to lift, carry, and transport survey equipment weighing up to 50 pounds, • Ability to set up, move, and dismantle survey instruments and tripods Pay transparency: • Base salary – starting at $72,800 annually (negotiable based on qualifications and experiences), • Full-time benefits include medical, dental and vision insurance, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company car, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • Training & development Benefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • Paid Training, • Company van, • Company iPad, • A path to build the life-long career, • Year-round work 3 year minimum experience needed as Plumbing Technician Come join an organization that works for you to help you achieve your professional and financial goals! Start working at a job where you are appreciated. Work in an environment that truly values your expertise, where your ideas and suggestions are listened to and where youll have the opportunity to make a lot of money! The Company 1-800-PLUMBER +AIR has the strength of a national brand, and each location is locally owned and operated. We are focused on providing a high quality experience for our employees and our customers. • Our technicians are provided with stocked vans to have the tools and equipment you need for almost every job., • We will work together to make sure that we put a plan in place that allows you, as being part of our team, to help you accomplish your goals. The Position Our licensed plumbers perform residential and commercial service and repair work, including basic residential and commercial plumbing repairs as well as water heater replacements, re-pipes, drain stoppages and sewer line replacements and other plumbing services as needed. • Competitive compensation packages, • Growth opportunities: When you begin your career with 1-800-PLUMBER +AIR, you will be given the training and support needed to grow into potential leadership roles, • Access to hours of customized, free training Qualifications: • Must have a valid state plumbing license, • Must have experience in home and commercial services, • Knowledge of current regulations within the plumbing field, • Must pass background check, • Ability to use plumbing tools, • Good physical condition, • Customer service experience, • Must pass drug screen, • Must have a valid state drivers license Are You A Fit? Here are the qualities were looking for in our perfect candidate: • You have a strong work ethic, • You enjoy being a team member, • You are a tech savvy problem solver you can diagnose a problem and fix it, • You have a strong desire to serve others, • You are always learning and challenging yourself to be better, • You want to be the B.E.S.T., • Becoming Better: Based on the principle that we are to always be learning, • Exceeding Expectations: Every time a customer has an encounter with you, your goal is to exceed their expectations, • Superior Service: Your trade has a major impact on people's lives. Never lose sight of the value of quality work done right the first time, every time., • Teamwork: Based on the principle we are stronger together. Working to create an unforgettable experience for our customers. ITS YOUR TIME NOW! Dont let this opportunity pass you by, apply today and start working towards your life goals as a member of the 1-800-PLUMBER +AIR team. Pay is based on your experience and expertise. Compensation: This role pays $30-$45/hour base salary with an additional commission based compensation.

Job Description Field Service Technicians, Forklift Mechanic Edison, NJ 08837 • $1,000 SIGN-ON BONUS – Field Service Technician (Mobile Mechanic) | Full-Time Get Out of the Shop. Get Into the Field. • We’re hiring Field Service Mechanics, Mobile Mechanics, and Heavy Equipment Mechanics to work on forklifts and heavy equipment across NJ, NY & Eastern PA, • If you want independence, variety, and strong earning potential — keep reading WHY THIS JOB STANDS OUT: • $1,000 Signing Bonus (for experienced forklift techs), • Union Pension Plan (huge long-term value), • Consistent Overtime available, • Medical, Dental, Vision, • Paid Vacation + Retirement Options, • Competitive Pay: $22–$35/hr. WHAT YOU’LL DO: • Diagnose & repair forklifts / heavy equipment onsite, • Travel locally to customer locations (no long hauls), • Work independently with strong support team, • Keep equipment running and customers productive WHAT YOU NEED: • At least 1+ year mechanical experience (forklifts, diesel, heavy equipment, or similar), • Valid driver’s license + clean record, • Ability to work independently, • Certifications are a plus (not required) WHO THIS IS PERFECT FOR: • Mechanics tired of shop work, • Techs who want autonomy + variety, • Anyone looking to grow with a stable, expanding company We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities. req22-01201

Job DescriptionCOMPANY OVERVIEW: At F.P. Developments, Inc., we recognize that our employees are our greatest asset. We foster a supportive environment where each team member’s unique strengths and perspectives are valued. Our state-of-the-art, 25,000 sq. ft. climate-controlled facility is a hub for innovation and collaboration, empowering our team to grow both personally and professionally. For 60 years, F.P. Developments has been a cornerstone in the pharmaceutical, biotech, and medical device industries. Established in 1963, we leverage the latest technologies and good old-fashioned ingenuity to solve today’s manufacturing and compliance challenges, consistently meeting our customers' specific requirements with precision and dedication. Join us and be a part of a legacy of quality and innovation. F.P. offers full medical, dental and vision benefits as well as 401k matching, holidays and PTO. SUMMARY: As an Electromechanical field service technician at F.P. Developments, you will train and assist in the fabrication, assembly, electrical wiring, controls programming and servicing of machines and robots used in primary pharmaceutical manufacturing and hospital pharmacy compounding. You will be a self-starter, a quick learner, and open to advancement and travel opportunities. You will also participate in our innovation process, offering suggestions around new capability development. THIS POSITION REQUIRES 15-20% TRAVEL ANNUALLY DUTIES AND RESPONSIBILITIES: • Assembling machines and robots:, • Utilize electrical and mechanical blueprints and schematics to assemble large and small machinery, • Collaborate with engineering and fabrication staff to ensure high quality, durable construction, • Analyze controls programming for PLC and robot automation to troubleshoot and simplify code structure, • Servicing and refurbishing machines and robots (onsite and in the field):, • Troubleshoot and fix machine issues across mechanical, electrical and controls, • Identify and document preventative maintenance procedures for new machines, • Inspect mechanical components for wear and electrical panels for loose and missing components and recommend necessary fixes, • Replace worn or missing parts and ensure machine functionality, • Innovation support, • Research issues and recommend potential solutions, • Stay up to speed with new and emerging technologies applicable to our products, • Collaborate across engineering and fabrication departments to select and implement solutions QUALIFICATIONS: • Education:, • High school diploma or equivalent with electromechanical and controls programming experience OR, • Electrical engineering undergraduate experience, • Skills:, • Mechanical aptitude, • Basic understanding of electrical schematics/wiring, • Basic understanding of PLC programming, • Follow through and follow up, • Strong organizational skills with the ability to manage multiple tasks effectively, • Attention to detail, ensuring all tasks are completed accurately and on time., • Ability to manage time effectively and prioritize tasks in a fast-paced environment, • Strong teamwork and collaboration skills COMPETENCIES: • Customer Service: Exceptional customer service skills with a focus on clear, effective communication and responsiveness to customer inquiries and needs, • Attention to Detail: Meticulous in checking and confirming all aspects of logistics operations, including deliveries, shipments, and inventory, • Openness to Feedback: Highly receptive to feedback, seeking continuous improvement and adjusting based on input from colleagues and customers, • Teamwork: Strong team player, able to collaborate effectively with multiple departments and contribute to a positive work environmentPHYSICAL DEMANDS AND WORK ENVIRONMENT:, • Continually required to stand, walk, sit, • Continually required to utilize hand and finger dexterity, • Occasionally required to climb, balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually utilize visual acuity to operate equipment, read technical information, and/or use a keyboard • Occasionally required to lift/push/carry items up to 100 pounds, • Frequently required to work near moving mechanical parts and always observe safety precautions, • Ability to travel and work independently The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Powered by JazzHR VYpHj30fSs