Industrial management jobs in Plainview, New YorkCreate job alerts

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Installs, maintains, calibrates, troubleshoots, repairs, modifies, and overhauls and utilizes technical HVAC skills to ensure the efficient installation, operation and maintenance of the heating ventilation, air conditioning and refrigeration equipment throughout the treatment plant. Primary Duties/Responsibilities: • Install, repair, align and adjust controls for HVAC systems. Service and install components including, but not limited to, compressors, heat exchangers, evaporators, regulators, fans, pumps, tubing valves, ducts, electrical wiring, sensing devices, burners, blowers, electrodes, relays, solenoids, switches, thermostats, conduit, process heating systems and monitoring systems., • Troubleshoot and adjust manual and automatic controls for HVAC equipment. Shape, size and connect tubing using special bending, flaring and coupling tools, etc., • Observe and interpret temperature and pressure devices., • Utilizes specialized tools and equipment including, but not limited to, pyrometers, voltmeters, ammeters, voltmeters, fuel gas analyzers, hydrometers., • Utilize specifications such as: blueprints, sketches and/or descriptions of parts to be replaced, and plan sequence of operations., • Maintain manual and/or computerized work orders and records as directed., • Provide assistance and direction to less experienced HVAC Technician and/or assigned helpers., • May provide support for other skilled trades workers as assigned., • Responsible for general housekeeping of shop, job sites, work areas and other areas as assigned including, but not limited to, sweeping, dusting, mopping, and cleaning as necessary to maintain areas to Company standards., • Observe all on-the-job safety regulations. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Eight (8) years of experience as an electrician, electronics repair person, or HVAC technician., • Two years of related education at a college, trade school or equivalent may be substituted for experience. Knowledge/Skills/Abilities: • Ability to read and understand operating manuals and written instructions, complex wiring diagrams, schematics, blueprints and technical materials., • Knowledge of algebra, geometry and trigonometry and knowledge of treatment plant machines and proper procedures for electrical and HVAC maintenance and repair., • Ability to use electrical and other testing equipment to troubleshoot problems and make repairs., • Ability to use variety of tools including, but not limited to, hammers, wrenches, metal snips, electric drill, pipe cutter and bender, and acetylene torches., • Ability to communicate effectively with others, orally and in writing. Ability to follow oral and written instructions., • Ability to perform all of the following assignments: straight pulling, pulling hand over hand, reaching above the shoulder, pushing, walking, standing, crawling, kneeling, repeated bending and climbing., • Thorough knowledge of principles and theories of pressure, vacuum, vaporization, condensations, heat conduction, radiation and convection as such principles and theories apply to air, steam and water furnace, boilers, heat exchanger and pumps., • Knowledge of principles of refrigeration, mathematics, etc., to the degree such principles apply to refrigeration and the HVAC system., • Thorough knowledge of chemistry and physics, oxygen/nitrogen production characteristics, chemical properties and application of refrigerants, techniques of installation, plant operation, maintenance and automation or refrigeration, air conditioning equipment and heating and cooling systems., • Thorough knowledge of an/or experience of relevant electrical codes, principles and theories applicable to the installation and maintenance of electrical equipment including solid state electronic components and electrical/electronic circuits. Required Certification/Licenses/Training: • Completion of recognized Apprenticeship program. Additional Information Pay Rate: $44.38 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Business Planning Specialist US-NY-Melville Job ID: 34376 Type: Full-Time of Openings: 1 Category: Sales/Business Development CUSA Melville Headquarters About the Role The Business Planning Specialist is responsible for developing and analyzing strategic plans to grow Canon's product and service portfolio, enhancing revenue and market share. This role combines market research, strategic planning, and cross-functional collaboration to identify growth opportunities and execute initiatives effectively. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. Your Impact This role is for a proactive and detail oriented professional who will lead business planning efforts with a strong focus on project management, driving sales and process improvement. Unlike traditional planning roles that emphasize reporting and data consolidation, this position requires active engagement cross-functionally to push both top-line growth and bottom-line efficiency, along with certain regular business planning support. • Manage and lead key strategic initiatives cross-functionally as assigned that align with business objectives, • Actively engage with and challenge the sales, marketing and service teams to drive achievement of business strategy and targets, • Visit customers, partners, and trade events to understand their business needs, competitive activities and market conditions as necessary, • Provide analytical and strategic input into, but limited to, marketing performance, budget planning and product allocation, • Administer and maintain regular Business Planning activities related to the execution of key objectives, • Support decision-making with actionable insights, not just data reporting About You: The Skills & Expertise You Bring • Bachelor's degree in a relevant field or equivalent experience required, plus 3 to 5 years of related experience, • Prior sales or business development/planning experience is a plus, • Business negotiations skills required, • Project management experience is a plus, • Good analytical skills, • Presentation skills required, • Excellent communication skills both verbal and written required, • MS Office and Google Workspace experience, • Up to 25% travel required, • Individual must possess a clean valid state driver's license in order to obtain the position, • This position requires driving, therefore a valid driver's license and acceptable driving record are necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies We are providing the anticipated salary range for this role: $66,300 - $81,550 annually. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at _ We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-AV1 #LI-HYBRID Compensation details: 66300-81550 Yearly Salary PIb5cf7bdfff35-37820-40760772

Job DescriptionNow Hiring: Case Planner (Full-Time, Hybrid/Flexible Schedule) Nassau County, NY | Field-Based Role | 35-hour Workweek - allowing you to make a meaningful impact while maintaining work-life balance. Are you passionate about supporting at-risk youth and strengthening families? Hope for Youth is looking for a dedicated and dynamic Case Planner to join our Nassau County PINS Diversion Program! We are also honored to announce that the Hauppauge Industrial Association of Long Island (HIA-LI), an advocate for its member organizations since 1978, has recognized HFY as their Not-For Profit Business Award honoree for Excellence in 2025! About the PINS Diversion Program: Our Person in Need of Supervision (PINS) Diversion Program aims to prevent court involvement and out-of-home placements for youth under 18 by providing short-term, family-centered, in-home support throughout Nassau County. We focus on building problem-solving skills and linking families to long-term community resources. Your Role as a Case Planner: As a Case Planner, you will support youth and families by improving family dynamics, encouraging behavioral change, and reducing the risk of placement outside the home. This role requires flexible hours, including evenings and weekends, and a field-based presence using your own vehicle. Key Responsibilities: • Carry a caseload of 15–25 families, • Conduct weekly in-home visits with youth and families, • Deliver life coaching, parent skills training, and case management services, • Attend school meetings, court appearances, and service planning sessions, • Complete and update CANS-NY assessments, • Maintain accurate, timely documentation and progress reports, • Participate in team meetings, supervision, and ongoing staff development, • Adhere to HFY and regulatory standards and practicesQualifications:, • BSW or Bachelor's in a related field with 2+ years of casework experience, or MSW, • Strong written, verbal, and tech skills, • Bilingual (Spanish/English) preferred, • Valid NYS Driver's License & access to reliable transportation, • Ability to work a flexible schedule to accommodate families, • Subject to all required background checks and clearances Physically able to perform duties (e.g., travel, climb stairs, prolonged periods of walking/sitting)What We Offer: • A mission-driven team dedicated to helping Long Island families Ongoing training and professional development Hybrid work model and supportive supervision Eligible for comprehensive benefits, including medical, dental, vision, and retirement plansApply Now If you're ready to make a difference in the lives of youth and their families, we'd love to hear from you! Only qualified candidates selected for interviews will be contacted. Please include a resume, cover letter and salary requirements. Only candidates selected for an interview will be contacted. Hope For Youth is an Equal Opportunity Employer. All offers must be made contingent and once a contingent offer has been accepted, all processing must note the contingency throughout the process. Excellent training and leadership opportunities available throughout employment and more. Here are some of the other benefits of working for Hope for Youth. • Meaningful work that makes a difference in the lives of children and families of Long Island!, • Supportive like-minded, mission-driven co-workers, • Diverse Culture that promotes recognition and belonging, • Advancement and supplemental pay opportunities, • Free Training programs, Free Tuition Credits, Scholarships and Tuition Assistance, • Employees may be eligible for Student Loan Forgiveness Programs, • Special Events and Recognition Awards, • Volunteer and Internship opportunities available within, • Benefit eligibility commences on the first of the month following the first 30 days of employment - Medical, Dental, Vision - HRA with HSA and Co-pay options available., • 91% Employer-paid medical premiums, • Generous paid time off, • Agency-funded Pension Plan, • Pre-tax savings plans: self-directed 403(b), 529, Aflac, • Agency-paid life insurance and disability, and for some positions, long-term disability Learn more about Hope for Youth at: http://www.hfyny.org Additional Pay Range Information The salary range and/or hourly rate range listed for this position is a good faith determination of potential compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., years of relevant experience, education, licensing, certifications, other credentials, negotiated contracts, budget and internal equity, etc.) Job Posted by ApplicantPro

Job Description About Hope For Youth: Hope For Youth is a nonprofit organization that has been providing comprehensive child welfare services for over 50 years. Our mission is to facilitate positive outcomes for children, adolescents, and families across Long Island. We are also honored to announce that the Hauppauge Industrial Association of Long Island (HIA-LI), an advocate for its member organizations since 1978, has recognized HFY as their Not-For Profit Business Award honoree for Excellence in 2025! About the OASAS Primary Prevention Program: Our OASAS Primary Prevention Program offers evidence-based education and support to children, families, and community stakeholders, with the goal of preventing substance and alcohol use. Through classroom-based presentations and community outreach, we empower individuals with the tools they need to make healthy choices. To be a successful Prevention Specialist you must be ready, willing, and able to do the following always: • Function within the policies and procedures as outlined in program practice guide and employee manual, • Adhere to state regulations and applicable code of conduct, • Perform other resulting and necessary work to meet the needs and requirements of the clients, the program, Hope for Youth, oversight agency and any other regulatory obligations How you will generally spend your time in this job: • Develop, plan, and deliver evidence-based character-building and social-emotional learning programs in school classrooms., • Provide prevention and psychoeducational programming to elementary school children., • Plan and lead community awareness events related to alcohol, substance use, and gambling prevention., • Conduct community surveys to assess local prevention needs and develop responsive programming., • Participate in summer camp programming in the Town of Babylon., • Attend required trainings, meetings, and professional development sessions., • Complete documentation and maintain compliance with OASAS Prevention regulations. To qualify for this job, you need to have at minimum: • High School Diploma. Bachelor's degree CASAC, CPP or CPS preferred, • Preferably one year of experience working with children and adolescents or community action work., • Excellent written and verbal communication skills are required., • Ability to practice within the scope of OASAS Prevention regulations., • Driving; Driving positions require NYS License, in good standing and drivers must be 21 years of age or older., • Computer skills are essential., • Access to a reliable vehicle that can be used on a regular basis for work., • Excellent writing skills/time management., • Ability to be flexible with scheduling (work evenings, possible weekends if necessary)., • Physical Requirements: read/write reports and log entries, walking/standing for prolonged periods, bending/stooping, kneeling/squatting, climbing stairs, reaching overhead, repetitive wrist/finger movements, ongoing access to reliable vehicle and driving own vehicle for work. This opportunity is available as a Full-Time position. • 35-hour work week, 8am-4pm some weekends/evenings flexing schedule to attend events Only candidates selected for an interview will be contacted. Please include a resume, cover letter and salary requirements. Only candidates selected for an interview will be contacted. Hope For Youth is an Equal Opportunity Employer. Excellent training and leadership opportunities available throughout employment and more. Here are some of the other benefits of working for Hope for Youth. All offers must be made contingent and once a contingent offer has been accepted, all processing must note the contingency throughout the process. • Meaningful work that makes a difference in the lives of children and families of Long Island!, • Supportive like-minded, mission-driven co-workers, • Diverse Culture that promotes recognition and belonging, • Advancement and supplemental pay opportunities, • Free Training programs, Free Tuition Credits, Scholarships and Tuition Assistance, • Employees may be eligible for Student Loan Forgiveness Programs, • Special Events and Recognition Awards, • Volunteer and Internship opportunities available within, • Benefit eligibility commences on the first of the month following the first 30 days of employment - Medical, Dental, Vision - HRA with HSA and Co-pay options available., • 91% Employer-paid medical premiums, • Generous paid time off, • Agency-funded Pension Plan, • Pre-tax savings plans: self-directed 403(b), 529, Aflac, • Agency-paid life insurance and disability, and for some positions, long-term disability Learn more about Hope for Youth at: http://www.hfyny.org Additional Pay Range Information The salary range and/or hourly rate range listed for this position is a good faith determination of potential compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., years of relevant experience, education, licensing, certifications, other credentials, negotiated contracts, budget and internal equity, etc.) Job Posted by ApplicantPro

Job Description We are hiring! ACS System Associates, Inc. established in 1983 is one of ENR top rated MBE privately held HVAC Commercial Companies. ACS is renowned for projects such as World Trade Center, Brooklyn Navy Yard, Stony Brook Hospitals, and a wide variety of both private and public work projects in the Greater New York area including Westchester, New York City, and Long Island. The diverse portfolio includes retail, office, industrial, hotel, schools, and hospital projects. We have an internal division complete with engineers, architects, draftsmen, project managers, and supervisors. These specialists work with clients such as Tishman, Turner, and Lend Lease to make sure each project is done effectively, on time, and within budget. We offer a lucrative benefits package to our employees that include Medical, Dental, Vision, 401K, PTO, Life Insurance, Education reimbursement to name a few. Headquartered in Long Island, NY with additional offices in Westchester County. Additionally ACS regularly works on HUD Section 3 Projects with hiring priorities for low-income persons. We are seeking experienced General Site Super to ensure that when a job is behind schedule or having issues they will immediately go to the job, analyze the issues, and stay on it until they are fixed. The General Site Supervisor will monitor this job going forward. When needed they will act as a supplemental Project Manager or Site Super and make the client happy again. This is the key deliverable and a non-negotiable requirement of the position. Key Duties & Responsibilities: • Managing and maintaining the project schedule from start to finish., • Working with the Project Manager, General Contractor, other trades, and suppliers to resolve issues/questions in a timely and cost-effective manner., • Adhering to plans specifications., • Reviewing all work for quality and accuracy., • Coordinating workers to meet the project schedule., • Reviewing and managing supplier deliveries., • Ensuring the cleanliness of site, • Ensuring that all site activities comply with safety regulations and procedures., • The coordination of subcontractors (as needed), • Engaging in hands-on work to keep the project on schedule., • Reporting and tracking on-site changes and progress, • Embracing teamwork with all trades to complete the project., • Must have current SST 62, • Must use own car Requirements: • 5 years of superintendent/field manager experience in the HVAC or General Contracting, • Proven track record of successfully completing projects on time and on budget., • Valid OSHA 30-hour and NYC DOB SST62 certification, • Proficiency with construction management software, • Must either live in Nassau, Western Suffolk, Within 5 Boroughs of NYC or Westchester Primary Location: United States-New York-Hicksville Other Locations: United States-New York-Westbury Other Locations: United States-New York-Mount Vernon Applicants must be authorized to work in the U.S. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. • Job Type: Full-time\nCompany Description, • With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts., • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset .We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential. Additionally ACS regularly works on HUD Section 3 Projects with hiring priorities for low-income persons., • With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\n\n Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\n\n We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \n\n* Our Associates are our Most Valued and Greatest Corporate Asset .We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential. Additionally ACS regularly works on HUD Section 3 Projects with hiring priorities for low-income persons.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TOMCO is seeking a Warehouse Operator to support Construction and Service operations in and around the Westbury, NY area. Role Summary The Warehouse Operator is responsible for the daily operation and organization of the warehouse, inventory control, material handling, and logistics support for field operations. This role works independently to ensure inventory accuracy, efficient distribution of materials, and a safe, organized warehouse environment while supporting technicians and management across multiple departments. This will be a 638b shop hand position with 638 benefits. Roles and Responsibilities: • Perform day-to-day warehouse operations independently while maintaining required inventory levels • Receive stock and non-stock items, verifying specifications, quantity, and quality, • Load and unload deliveries to support Construction and Service departments, • Pick up and deliver parts, tools, and equipment to various job sites as needed, • Operate warehouse equipment such as forklifts, pallet jacks, and hand trucks safely and efficiently, • Maintain an organized warehouse layout to support efficient workflow, • Research discrepancies on orders and packing slips and coordinate returns with vendors, • Manage inventory records, identify losses, and assist with returns management, • Distribute incoming packages to the appropriate departments, • Maintain company parts, equipment, and tools in good working condition, • Support upkeep of company shop vans and trucks, • Haul waste materials to approved disposal locations as required, • Ensure all warehouse and storage areas are clean, organized, and free of safety hazards, • Perform general facility cleaning tasks such as trash removal, mopping, and light groundskeeping, • Comply with all company policies, safety procedures, and applicable standards, • Perform additional duties as assigned by the Service Manager Skills and Qualifications: • 2–5 years of warehouse experience, including forklift operation, • High school diploma or equivalent, • Valid California driver’s license with a clean driving record, • Current DOT medical card or ability to obtain one, • Ability to safely operate vehicles with manual and automatic transmissions, • Ability to work independently with minimal supervision, • Strong organizational, multitasking, and time management skills, • Effective verbal and written communication skills, • Ability to read and understand safety manuals, policies, and work instructions, • Ability to interact professionally with a diverse workforce, • Proficiency with Microsoft Word, Excel, email, and internet-based systems, • Ability to accurately enter data into internal and customer systems Preferred Qualifications: • Experience and/or working knowledge of HVAC/R equipment, • Prior experience supporting construction or field service teams, • Familiarity with inventory management systems Benefits: • Competitive pay, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and paid holidays, • Company vehicle (as applicable), • Year-round, steady work, • Opportunities for advancement, • Supportive, team-oriented work environment

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO: Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! Position Summary The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction and Forestry Machinery, Compact Construction Equipment, and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. Key Responsibility Areas (KRA) • Track construction bid results to identify opportunities with existing accounts and prospects., • Determine customer needs and select applicable equipment configurations to meet customers’ technical requirements and applications., • Perform trade evaluations on new quote opportunities., • Perform price calculations and generate customer quotations., • Write bid specifications that favor John Deere and Allied Products, • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services., • Perform Operation & Maintenance training on new equipment deliveries., • Attend and participate in trade shows, conferences and other industry related networking events., • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles., • Maintain records of customer communications, personal visitations and opportunities in the company CRM system., • Communicate any client information that may affect company decisions to appropriate department personnel as needed., • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes., • Maintain knowledge of competitor’s products and identify and report intelligence on competitors pricing or marketing strategies to management and peers., • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals., • Maintain current knowledge of JESCO products., • Understand and comply with established guidelines that ensure a safe and healthy work environment., • PERFORM other related duties as assigned. Performance Measures • New and Used Equipment Sales, • Rental Revenue, • Gross Profit Margin Achieved, • Market Share, • Number of New Accounts, • Call Frequency Achievement, • Trade Appraisal Detail & Accuracy, • Conflict Resolution, • Product & Selling Skills Learning, • Timely and Accurate Sales Reporting Requirements: Knowledge and Skill Requirements • Bachelor’s degree., • Five years of proven outside sales experience., • Knowledge of construction and/or industrial equipment operation and applications., • Strong interpersonal and oral communication skills., • Strong presentation skills and professional appearance., • Excellent planning and organizational skills., • Strong written communication skills with exceptional presentation, negotiation and business acumen., • Proficiency in Microsoft Office products and CRM systems., • High energy, excellent self-motivation and work ethic. Physical Requirements • Candidates are expected to occasionally operate, demonstrate, climb up and down and walk around the equipment in order to sell to customers., • Candidates should have the physical ability to evaluate equipment for trade. This includes climbing on the equipment and operating the equipment., • Candidates will be expected to drive a vehicle and cover a particular assigned territory. Driving in a vehicle may be up to 80% of their day., • Candidates must be able to travel by air to attend any Sales related or professional development events or as required by the company., • Candidates should be able to complete at least six to ten effective customer visits per day., • Candidates should be able to lift and carry 50 pounds., • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments in order to meet with customers on jobsites., • Valid Driver’s License - must meet insurance underwriting requirement

Job Description Locations: College Point, NY | Farmingdale, NY | East Hanover, NJ (Hybrid – 3 days onsite / 2 days remote) A large heavy civil general contractor is adding a Business Intelligence Manager (BI Manager) to their team. This role can sit on a hybrid basis in Farmingdale, NY, College Point, NY or East Hanover, NJ. This is a highly visible leadership opportunity for an experienced BI professional who enjoys combining technical expertise, people leadership, and strategic business partnership. The successful candidate will lead an established Business Intelligence team while helping shape the organization's long-term analytics strategy, modernize enterprise reporting, and drive responsible AI adoption across the business. Reporting directly to executive leadership, this individual will work closely with Finance, Operations, Estimating, HR, and Technology teams to build scalable reporting solutions, improve decision-making, and support continued organizational growth. Position Summary The Business Intelligence Manager will oversee the organization's enterprise reporting and analytics function while managing a team of Business Intelligence Analysts responsible for delivering data-driven insights across every business unit. This role requires a strong technical foundation in Power BI and SQL, combined with proven leadership experience and the ability to communicate effectively with executive stakeholders. Beyond managing the existing BI environment, this individual will help establish the company's long-term BI roadmap and lead initiatives around AI, automation, and advanced analytics. Key ResponsibilitiesBusiness Intelligence Leadership Lead, mentor, and develop a team of three Business Intelligence Analysts. Establish priorities, workflows, quality standards, and best practices across the BI function. Serve as the primary liaison between executive leadership and the Business Intelligence team. Manage cross-functional reporting initiatives across Finance, Operations, Estimating, HR, Safety, and other business units. Enterprise Reporting & Analytics Oversee the design, development, and maintenance of enterprise Power BI dashboards and reporting solutions. Ensure reporting accuracy, consistency, and data governance across the organization. Build executive dashboards and KPI reporting to support strategic decision-making. Drive continuous improvements in reporting efficiency, automation, and data quality. Data Architecture & Integration Manage and optimize Power BI reporting architecture utilizing multiple data sources including: SQL databases (Vista/Trimble Viewpoint) Power BI Dataflows Salesforce Riskcast SharePoint Azure Cloud tables Cloud SQL environments Additional operational and API-driven data sources Partner with IT and business stakeholders to improve data integration, scalability, and reporting performance while supporting future cloud migration initiatives. AI, Automation & Innovation Help develop the company's AI strategy and identify opportunities to leverage Generative AI, automation, predictive analytics, and machine learning. Evaluate emerging technologies and recommend solutions that improve productivity, forecasting, reporting, and operational decision-making. Partner with internal stakeholders and external consultants to support responsible enterprise AI adoption. Executive Partnership Partner closely with executive leadership to identify reporting needs and business priorities. Translate complex data into meaningful business insights for both technical and non-technical audiences. Present reporting strategies, recommendations, and analytics to senior leadership. Current Technology Environment The BI environment currently integrates data from multiple enterprise systems utilizing: Microsoft Power BI SQL Server Vista (Trimble Viewpoint) Power BI Dataflows On-Premises Data Gateway Salesforce Azure Cloud SharePoint REST APIs Cloud SQL platforms Power Automate The organization is actively investing in expanding its analytics capabilities and modernizing its data architecture while exploring enterprise AI initiatives. Qualifications Bachelor's degree in Computer Science, Information Systems, Business Analytics, Engineering, Construction Management, or related field preferred. 5+ years of Business Intelligence, Data Analytics, or Data Engineering experience. Previous leadership experience managing or mentoring BI or Analytics teams. Advanced Power BI experience including: DAX Power Query Data Modeling Dashboard Development Report Optimization Strong SQL experience with relational databases. Experience integrating multiple enterprise data sources. Experience building executive dashboards and KPI reporting. Strong communication and stakeholder management skills. Experience working within construction, engineering, manufacturing, project-based, or industrial organizations is highly preferred. Preferred Experience Viewpoint/Vista (Trimble) Construction ERP systems API integrations Power Automate Azure AI and automation initiatives Data governance Cloud data architecture Why This Opportunity? Lead an established Business Intelligence team. Highly visible role partnering directly with executive leadership. Opportunity to build the long-term BI strategy for a growing organization. Spearhead enterprise AI and automation initiatives. Influence decision-making across Finance, Operations, Estimating, HR, and executive leadership. Hybrid work schedule (3 days onsite / 2 remote). Flexibility to work from multiple office locations with occasional travel to regional offices.

Job Description Overview The Logistics Specialist coordinates waste, recycling, transportation, and vendor management solutions by integrating logistics planning, customer support processes, operational analytics, and subcontractor management practices to deliver safe, compliant, cost-effective, and responsive service solutions for Casella customers. The role maintains customer accounts and logistical services by leveraging transportation networks, disposal and processing partnerships, customer relationship management systems, and operational reporting tools to ensure continuity of service, customer satisfaction, and achievement of business objectives. The position analyzes service performance, financial data, and customer requirements by utilizing business systems, analytical tools, and cross-functional collaboration to optimize resource deployment, improve operational efficiency, and support profitable growth. The Logistics Specialist supports internal stakeholders and external customers by providing subject matter expertise, system-based problem resolution, and proactive service recommendations to strengthen customer retention, operational effectiveness, and long-term business relationships. Hiring Range: $68,000-$100,000 based on experience with room for career advancement Responsibilities • Coordinates customer waste, recycling, transportation, and environmental service requirements through the planning, scheduling, monitoring, and execution of service solutions to ensure contractual commitments, customer expectations, and operational objectives are consistently achieved., • Manages customer account activities by serving as the primary day-to-day liaison, responding to service inquiries, resolving escalated issues, and communicating service recommendations to maintain high levels of customer satisfaction, retention, and account performance., • Administers logistics and transportation services through the selection, coordination, and oversight of third-party vendors, carriers, and processing facilities to ensure safe, compliant, cost-effective, and reliable execution of customer service commitments., • Monitors operational and service performance metrics by analyzing transportation activity, facility throughput, service exceptions, and customer trends to identify improvement opportunities and support continuous operational excellence., • Maintains logistical, contractual, and financial records through the accurate processing of manifests, weight tickets, billing documentation, vendor invoices, and supporting business records to ensure data integrity, regulatory compliance, and accurate financial reporting., • Analyzes customer, vendor, and operational information using business intelligence tools, customer relationship management systems, and reporting platforms to support informed decision-making, forecasting, and service optimization initiatives., • Resolves service, transportation, system, and vendor-related issues through investigative analysis, root cause identification, and cross-functional collaboration to minimize operational disruptions and maintain continuity of customer service., • Supports organizational process improvement initiatives by identifying workflow enhancements, recommending system modifications, and participating in technology-enabled business solutions to increase efficiency, productivity, and service effectiveness., • Provides customer support systems expertise through the administration, validation, and utilization of operational, CRM, dispatch, and customer support platforms to ensure accurate information management, effective issue resolution, and enhanced user experience for internal and external stakeholders. Career Path & Distinctions Logistics Specialist I - Typically possesses 0-2 years of relevant business, logistics, customer service, operational support, or supply chain experience. At this level, the incumbent develops foundational knowledge of Casella's services, customer requirements, subcontractor networks, operational systems, and business processes. The employee works under established procedures while building proficiency in customer account management, logistics coordination, data management, problem resolution, and business systems utilization. Logistics Specialist II - Typically possesses 3-5 years of progressively responsible experience in logistics, transportation, vendor management, customer support, operations analysis, or related functions. The incumbent demonstrates a comprehensive understanding of Casella's operational model and independently manages a larger portfolio of customer accounts, vendors, and service solutions. At this level, the employee resolves complex service issues, analyzes performance trends, supports process improvement initiatives, and serves as a resource to less experienced team members while maintaining high productivity and service quality standards. Logistics Specialist Sr. - Typically possesses 6+ years of advanced logistics, customer relationship management, transportation, operational analytics, business systems, or vendor management experience. The incumbent serves as a recognized subject matter expert responsible for resolving highly complex operational challenges, managing strategic customer relationships, supporting significant process and system improvements, and influencing transportation, vendor, and service strategies. At this level, the employee provides technical leadership, mentors junior staff, drives continuous improvement initiatives, and applies advanced analytical, operational, and customer support system expertise to improve organizational performance and customer outcomes. Nature & Scope The Logistics Specialist reports directly to a Logistics Supervisor, who reports to the Manager of Logistics. The position does not typically maintain direct supervisory responsibility but may provide functional guidance, training, and technical support to less experienced Logistics Specialists and other operations team members. The role works closely with Strategic Account Managers, Customer Care teams, Operations team, Transportation providers, Sustainability teams, Accounting, Sales, Business Systems team, and external vendors. Success requires effective collaboration across organizational boundaries while maintaining productive working relationships with both internal and external stakeholders. The Logistics Specialist operates within Casella's Logistics and Resource Solutions organization, which is responsible for coordinating transportation, disposal, recycling, and sustainability-related services across a diverse customer portfolio. The department functions in a dynamic, customer-driven environment where operational responsiveness, regulatory compliance, cost management, and service reliability are critical to business success. The position supports a broad range of commercial, industrial, municipal, and strategic account customers whose service requirements frequently change due to business conditions, project demands, regulatory requirements, and operational constraints. The role must balance customer expectations with transportation capacity, facility availability, contractual obligations, and profitability considerations while maintaining Casella's commitment to environmental stewardship and customer service excellence. This role serves as the central coordination point between customers, vendors, transportation providers, disposal facilities, recycling facilities, and internal operational groups. The position is responsible for translating customer requirements into executable service plans and ensuring those plans are carried out efficiently and effectively. In addition to logistics coordination responsibilities, the incumbent performs analytical and customer support system functions that contribute to overall service quality and operational effectiveness. The position utilizes operational technologies, CRM platforms, dispatch systems, reporting tools, and financial systems to monitor performance, manage information, identify trends, and support strategic business decisions. The role combines logistics expertise, customer relationship management, operational analysis, and systems proficiency to support customer satisfaction and organizational performance. The Logistics Specialist routinely encounters situations requiring independent analysis and judgment where variables may be incomplete, conflicting, or rapidly changing. Challenges frequently involve balancing customer expectations with transportation constraints, facility capacity limitations, subcontractor performance issues, regulatory requirements, and financial objectives. The position must evaluate multiple service alternatives, identify root causes of operational issues, and develop practical solutions that address immediate concerns while minimizing business risk. Customer support system troubleshooting, data integrity issues, reporting discrepancies, and process inefficiencies may require the incumbent to investigate operational workflows across multiple systems and stakeholders. Problem solving generally involves established principles and procedures but regularly requires creativity, initiative, and informed judgment to achieve desired outcomes. The Logistics Specialist operates with substantial independence within established company policies, contractual agreements, regulatory requirements, and departmental procedures. The incumbent is expected to make routine operational decisions regarding service scheduling, vendor utilization, issue resolution, customer communication, and process execution without direct supervision. Work is evaluated primarily through customer satisfaction, service performance, operational efficiency, compliance, financial accuracy, and achievement of departmental objectives. Decisions involving significant financial impact, contractual modifications, major customer escalations, policy exceptions, or strategic business implications are typically reviewed with or approved by management. The position exercises discretion in determining appropriate solutions while remaining accountable for the quality and effectiveness of outcomes. Internally, the Logistics Specialist maintains frequent interaction with Logistics leadership, Strategic Account Managers, Customer Care team, Sales teams, Operations team, Sustainability professionals, Accounting staff, Business Systems teams, and executive stakeholders requiring operational information and service updates. These interactions involve information sharing, collaborative problem solving, process improvement, and operational coordination. Externally, the role maintains ongoing relationships with customers, transportation providers, subcontractors, disposal facilities, recycling facilities, environmental service vendors, and regulatory contacts as appropriate. These interactions require the ability to exchange information, negotiate service solutions, influence outcomes, resolve disputes, and build productive long-term partnerships that support Casella's business objectives and customer commitments. Qualifications Successful candidates will have an associate’s degree in business administration, logistics management, operations management, environmental studies, or a related discipline, or an equivalent combination of education and relevant experience. Candidates should possess progressive experience in logistics coordination, customer service, transportation management, operations support, business analytics, customer support systems, vendor management, or related business functions. Candidates should demonstrate strong relationship management, communication, problem-solving, and analytical skills, along with proficiency in Microsoft Office applications, customer relationship management systems, operational software platforms, and reporting tools. Experience supporting customers, coordinating multiple stakeholders, analyzing operational data, and working within service-oriented or environmentally focused organizations is strongly preferred. A valid driver’s license, ability to travel 10% of the time, and periodic overnight travel for regional meetings are required. Candidates must be legally authorized to work in the United States.

Job Description As a Commercial Real Estate Appraiser, you will be an integral part of a small team responsible for delivering accurate property valuations across a diverse portfolio including office buildings, retail centers, industrial properties, mixed-use developments, and multi-family properties. Leveraging tools such as CoStar, you will conduct thorough market and financial analyses to support our clients, primarily banks and lenders, with detailed appraisal reports and insights. Travel to property sites is required. Responsibilities • Conduct property valuations for various commercial real estate types, • Perform comprehensive market analysis to support appraisal conclusions, • Prepare detailed and accurate appraisal reports for clients, • Coordinate and conduct property inspections Required Qualifications • Bachelor's degree in Real Estate, Finance, or a related field Preferred Qualifications • 2+ years of experience in commercial real estate appraisal, • Certified General Real Estate Appraiser License, • Proficiency with real estate appraisal and market research methodologies, • Experience with property inspection and report writing, • Excellent analytical thinking and communication skills, • Effective time management abilities

Job DescriptionRoofing Service Field Supervisor (Commercial/Industrial Roofing) CentiMark Corporation, a national leader in the commercial/industrial roofing industry, has an exceptional opportunity for a Service Field Supervisor for our Long Island NY office. Pay Range: $36 - $42 an Hour JOB DUTIES • Supervise multiple service crews, • Responsible for doing pre-job & post-job inspections, • Planning jobs for labor crews, • Responsible for setting up and maintaining a safe job site, • Daily communications with the customer, • Planning and executing a successful project, • Work closely with the Warehouse Manager in ordering materials for projects QUALIFICATIONS • Must have good working knowledge of Roofing procedures and safety, • Excellent communication/writing skills, • Computer skills and able to set up and manage multiple jobs, • Analytical, leadership, interpersonal, problem solving and organizational/time management skills, • Excellent follow-up skills, • 5 years Roofing/construction sales experience required, • 3 years of customer service experience required, • Valid State driver's license (in good standing) is required, • Experience with: EPDM, BUR, FOAM, METAL, ACRYLIC, TPO and/or SHINGLES CentiMark provides a great work environment with challenging career opportunities. We also offer competitive compensation and excellent benefits that include: Premier Benefits: • 2 Health Insurance Plans:, • Free “Core Plan” – Free Medical & Dental, • “Buy Up Plan” – Features a lower deductible for Medical, • Vision Plan, • Free Life Insurance, • 401K with Company Match, • Paid Holidays and Vacation, • Employee Stock Ownership Program (ESOP)CentiMark provides a great work environment with challenging career opportunities. Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer For more information, please visit our website -- www.CentiMark.com/jobs Powered by JazzHR D9kRpxtEPA

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job DescriptionSr IT Supervisor - OT Requisition: 82329PSEG Company: PSEG Long IslandSalary Range: $121,200 - $199,200Work Location Category: Hybrid FlexibleWe’re one of the country’s largest energy companies, with a vision of powering a future where people use energy more efficiently and it’s safer and delivered more reliably than ever. We’re also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day.Here, you’ll have the stability and exciting opportunities that come with being a Fortune 500 company — along with a supportive, friendly work environment where your contributions are valued. We know life isn’t one-size-fits-all, and neither is work. That’s why we offer flexible work options depending on the role. In support of this model, roles have been categorized into one of three work location categories: 1. Onsite – roles where employees are expected to be onsite daily., 2. Hybrid fixed – roles that are a mix of remote work and onsite work fixed days each week., 3. Hybrid flexible – roles that are a mix of remote work and onsite work, but the onsite requirements have greater flexibility. (i.e. 5-8 days a month vs. set days each week).As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits designed to support your total well-being: medical, dental, vision, paternal leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off.More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you’re looking for a place where you can build a meaningful career and help power and support our communities, we’d love to welcome you to the team.PSEG is not offering visa sponsorship for this position. Job Summary:The Technology Network Supervisor will lead and supervise a team of information technology professionals while overseeing the design, operation, security, and reliability of Operational Technology (OT) network environments. This role requires deep technical expertise combined with strong leadership and operational management skills.The Technology Network Supervisor will ensure high availability and performance of Operational Technology (OT) networks, support business-critical systems, and drive continuous improvement in network operations, security, and compliance. Experience within utility or industrial environments is highly desirable, as the role may involve supporting mission-critical infrastructure and regulated systems This position works closely with IT leadership, cybersecurity teams, operations, vendors, and other stakeholders to align network strategies with organizational objectives Job Responsibilities: • Provide technical leadership, mentoring, and performance management for team members, while collaborating with cross-functional stakeholders to align network services with business and operational objectives., • Lead and supervise a team of network professionals responsible for the design, operation, and support of OT network environments., • Oversee day-to-day network operations to ensure high availability, performance, and reliability across Operational Technology (OT) networks., • Manage and coordinate network-related projects, including upgrades, expansions, and technology refresh initiatives, ensuring delivery on time and within scope., • Proactively identify, assess, and remediate network security vulnerabilities while ensuring audits and compliance with organizational policies, industry standards, and regulatory requirements., • Maintain accurate network asset inventories and oversee lifecycle planning, including capacity planning, vendor management, and end-of-life strategies for network infrastructure., • Work and communicate with a wide range of people including peers, vendors, staff members, broader functional and appropriate business leadership, and others. Consistently demonstrate professional, positive, and approachable attitude/demeanor and discretion. Job Specific Qualifications: • Bachelor’s degree in computer science or a related technical field with a minimum of 8 years of experience in enterprise network environments, • A minimum of 3 years of supervisory experience in network technologies, • In-depth knowledge of Network infrastructure technologies., • Strong background in enterprise networking, including network security, LAN, WAN, Wireless, • Familiarity with OT networking standards and architectures like SCADA/DSCADA environments, • Strong communication, interpersonal, and consultative skills, and the ability to work effectively with clients, leadership and employees at all levels., • Strong understanding of ITSM (ITIL) and overall understanding of Infrastructure components., • Demonstrated experience in vendor management in the day-to-day activities related to supporting critical systems., • Excellent analytical and problem-solving abilities, • Strong skills in project and problem management., • Understanding of general IT standards, policies, best practices, guidelines, processes., • Department of Energy’s regulation 10 CFR 810 is required Some positions at PSEG require access to information covered by the Department of Energy’s regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: (1) a citizen or national of the USA; OR (2) a lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR (3) a citizen, national, or permanent resident of a “Generally Authorized” destination on the attached list and not also a citizen, national, permanent resident of any country not listed; OR (4) a “Protected Individual” under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)). As an employee of PSEG Long Island, you should be aware that during storm/outage restoration efforts, you may be required to perform functions different from normal operations and work extended hours beyond your regular work schedule. You may also be required to work on premise or in an alternate location as directed by the company. For all roles, PSEGLI’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you are a current PSEG employee and offered an opportunity with PSEG Long Island, you will be treated as a new hire. Please note that as a new hire to the Long Island subsidiary, your benefits will change and generally will be consistent with other similarly situated PSEG Long Island new hires. Similarly, for PSEG Long Island employees who accept job opportunities with PSEG or any of its subsidiaries (other than PSEG Long Island), their benefits will change and generally be consistent with other similarly situated new hires of that company.

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Summary The National Accounts Sales Executive is responsible for growing sales of MAX Sign & Marking Products throughout the United States and Canada. This role focuses on developing new end-user accounts, expanding the dealer network, conducting product demonstrations, and supporting dealers and customers after the sale. The ideal candidate is self-motivated, relationship-focused, and comfortable identifying new business opportunities through prospecting, customer visits, trade shows, and other direct sales activities. Key Responsibilities Business Development & Sales Develop and maintain a target list of prospective end users Conduct outbound sales activities, including cold calling and prospecting, to generate new business opportunities Introduce MAX products to prospective customers and schedule and conduct product demonstrations Develop and execute sales promotions and marketing initiatives Identify opportunities to grow sales within new and existing accounts Dealer Development & Support Develop and expand the MAX dealer network Maintain and strengthen relationships with existing dealers Train dealer sales representatives on MAX products Identify key dealer personnel and implement targeted sales and promotional initiatives Visit end users alongside dealer sales representatives to promote MAX products and increase sales Respond promptly and professionally to dealer and customer questions and requests Customer & Product Support Provide product support and troubleshooting assistance to dealers and end users Deliver effective product demonstrations and sales presentations Provide continued support to customers following the sale Partner with Engineering to conduct field testing and product evaluations as needed CRM & Reporting Use Salesforce daily to document sales calls, email campaigns, customer interactions, opportunities, and other sales activity Submit expense reports, trade show reports, dealer visit reports, customer follow-up letters, and other required documentation in a timely manner Maintain accurate customer, sales, and market information Travel & Trade Shows Travel throughout the United States and Canada to visit dealers and end users Attend trade shows and other industry events to demonstrate MAX products and generate qualified sales leads Conduct in-person customer visits and product demonstrations as required Additional Responsibilities Partner with the Office Manager to assist with the collection of past-due accounts Complete special projects and other duties as assigned Follow all MAX company policies, procedures, and regulations Qualifications Education & Experience Bachelor’s degree or equivalent professional experience preferred At least two years of B2B sales experience, preferably within industrial products, labeling, marking, or a related industry Experience with outbound sales, cold calling, prospecting, and business development Experience using Salesforce or a similar customer relationship management system Skills Strong communication, prospecting, and relationship-building skills Ability to conduct product demonstrations and deliver effective sales presentations Proficiency with Microsoft Office, including Outlook, Excel, Word, and PowerPoint Strong organizational and time-management skills Self-motivated, results-oriented, and comfortable working independently Travel Requirements Ability to travel throughout the United States and Canada as required Valid driver’s license Ability to travel by air Reports to: Marketing Manager Salary - $70,000 - $85,000/year

Job Description THE CANDIDATE MUST RESIDE IN MI, IN, OH, KY, OR WV TO BE CONSIDERED FOR THIS ROLE. About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview MAX USA Corp is seeking a driven and experienced Regional Sales Manager to lead sales operations within the East Midwest region. This role is responsible for driving revenue growth, managing regional staff, and executing strategic initiatives aligned with the national sales plan. The ideal candidate has a proven history of success in two-step distribution sales, leading teams, and developing strategic sales plans within the industrial tools or construction industry. Key Responsibilities Own all sales activities, customer relationships, and profitability within the assigned region. Develop and implement regional and territory-level sales plans. Grow sales and profit based on National Sales Plan Recruit, train, and manage Regional Sales Executives and Jobsite Specialists for the region Search for new distributors as needed Regularly travel within the region to support field teams and customers. Represent MAX USA Corp at national and regional trade shows and industry events. Ensure timely and accurate reporting, including expense reports, dealer visit summaries, show reports, CRM updates, and sales confirmations for region. Manage promotional budget Work with Office Manager to collect past due accounts Implement MAX programs with accounts (100 PSI, Powerlite, Concrete) Must follow MAX company regulations Collaborate with engineering teams to support product research and field testing. Ensure adherence to company policies and standards Special projects per request Qualifications Education: Bachelor’s degree in business or a related field required; MBA preferred or equivalent work experience. Experience: Minimum of 5 years of sales experience, with regional or national territory experience preferred. Proven track record of managing sales teams and achieving sales targets. Proficient in Microsoft Office Suite and CRM platforms (Salesforce.com preferred). Experience developing promotions, conducting field training, and coordinating jobsite visits and open houses. Skills & Competencies: Strong leadership and people management skills. Excellent analytical, organizational, and communication skills. Ability to develop and execute effective territory management strategies. Self-starter with a proactive and collaborative approach. Physical Requirements Frequent travel within the assigned region, including overnight trips. Participation in trade shows and jobsite setup/dismantling as needed. Ability to demonstrate products in field environments. Capable of lifting and carrying heavy equipment and promotional materials. Location: The candidate must reside in MI, IN, OH, KY, or WV to be considered for this role. Salary: 100k - 130k commensurate with experience and qualifications

Job DescriptionWe are looking for an accomplished Chief Financial Officer to lead the financial strategy and performance of our wood and furniture manufacturing operations in Westbury, New York. This executive will guide budgeting, forecasting, reporting, and long-term planning while partnering closely with leadership to support growth and operational efficiency. The ideal candidate brings strong financial leadership, relationship management skills, and the ability to translate complex data into practical business decisions. Responsibilities: • Direct the organization’s financial planning activities, including annual budgets, forecasts, cash flow oversight, and long-range business planning., • Partner with executive leadership to shape financial strategies that support profitability, scalable operations, and sustainable growth., • Oversee accounting, financial reporting, and internal controls to ensure accuracy, compliance, and timely delivery of key business insights., • Build productive relationships with banking partners, insurers, vendors, and other external stakeholders to support the company’s financial objectives., • Evaluate business performance through detailed analysis of revenue, cost structures, and operational trends, then recommend actions to improve results., • Lead responses to inbound financial and business inquiries from internal leaders, external partners, and other stakeholders with professionalism and clarity., • Support risk management efforts by reviewing insurance programs, financial exposures, and policies that protect the business., • Collaborate with operational teams to align financial priorities with manufacturing goals, inventory management, and customer commitments., • Must have NetSuite software experience, • 10+ years of progressive finance leadership experience, including senior-level responsibility for financial strategy and organizational performance., • Proven background in a CFO or comparable executive finance role, preferably within manufacturing, industrial, or product-based environments., • Strong ability to develop and maintain trusted business relationships across executive teams, external partners, and key stakeholders., • Demonstrated expertise in budgeting, forecasting, financial analysis, reporting, and cash management., • Knowledge of risk management practices, including oversight of health insurance or broader employee benefits programs., • Excellent communication skills with the ability to address inquiries clearly and influence decision-making at the leadership level., • Experience working with operational and commercial teams to connect financial planning with broader business objectives., • Bachelor’s degree in Finance, Accounting, Business, or a related field; advanced credentials such as CPA or MBA are preferred.

Job DescriptionEngineering Manager Job Summary We are seeking an experienced and strategic Engineering Manager to lead an engineering team responsible for the design, development, and production of complex electromechanical products within a highly regulated manufacturing environment. This individual will oversee engineering operations, mentor technical staff, drive innovation, ensure successful program execution, and collaborate cross-functionally to deliver high-quality products that meet customer and regulatory requirements. The ideal candidate is a proven engineering leader with strong people management skills and a solid technical foundation. Candidates with experience in aerospace, defense, manufacturing, industrial equipment, or other regulated industries are encouraged to apply. Key Responsibilities • Lead, mentor, and develop a multidisciplinary engineering team, fostering a culture of accountability, collaboration, technical excellence, and continuous improvement., • Establish engineering goals, priorities, and performance expectations., • Conduct coaching, employee development, and succession planning activities., • Build and maintain a high-performing engineering organization., • Oversee engineering activities from concept through production and product lifecycle support., • Ensure engineering deliverables are completed on schedule, within budget, and in accordance with quality standards., • Manage engineering resources and project priorities across multiple programs., • Drive continuous improvement initiatives related to engineering processes, efficiency, and product quality., • Partner with Manufacturing, Quality, Supply Chain, and Executive Leadership to ensure successful program execution., • Support proposal development, technical reviews, and customer presentations., • Identify technical risks and implement mitigation strategies., • Provide engineering support throughout prototype, production, testing, and sustainment phases., • Ensure compliance with customer specifications, contractual requirements, and applicable industry standards., • Support quality management systems such as AS9100 and ISO standards., • Develop engineering strategies aligned with business objectives., • Evaluate and recommend new technologies, tools, and engineering methodologies., • Support long-term product development initiatives and innovation efforts., • Participate in strategic planning and operational decision-making.Required Qualifications, • Proven track record leading engineering activities that result in the successful qualification and production release of new products, including verification, validation, environmental testing, and customer qualification efforts., • Bachelor's Degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, Systems, Aerospace, Electromechanical, or a related discipline)., • Minimum 15 years of progressive engineering experience., • Minimum 10 years of engineering management experience leading technical teams., • Experience within aerospace, defense, military, or other highly regulated manufacturing environments., • Demonstrated experience leading multidisciplinary engineering organizations., • Strong understanding of engineering design processes, product development, manufacturing support, and systems integration., • Experience managing multiple engineering projects simultaneously., • Proven ability to build, mentor, and retain high-performing engineering teams., • Excellent written, verbal, and presentation communication skills., • Strong analytical and problem-solving abilities.What We Offer, • Opportunity to lead and develop a talented engineering organization., • Collaborative and team-oriented work environment., • Exposure to complex, cutting-edge engineering programs., • Career growth and leadership advancement opportunities., • Competitive compensation and comprehensive benefits package.Pay Details: $150,000.00 to $200,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: JOB TITLE: Engineering Manager Job Summary: We are seeking an experienced and strategic Engineering Manager to lead our engineering team in the design, development, and production of advanced defense and electromechanical systems. This individual will be responsible for managing engineering operations, mentoring technical staff, driving innovation, ensuring program execution, and collaborating cross-functionally to deliver high-quality products that meet customer and regulatory requirements. The ideal candidate is a proven engineering leader with extensive experience in the Defense industry, exceptional people management skills, and a strong technical foundation. While an electromechanical engineering background is preferred, candidates from other engineering disciplines with relevant defense industry experience are encouraged to apply. Key Responsibilities: · Lead, mentor, and develop a multidisciplinary engineering team with support from other functional managers, fostering a culture of accountability, collaboration, technical excellence, and continuous improvement. · Establish engineering goals, priorities, and performance expectations. · Foster a culture of accountability, innovation, continuous improvement, and collaboration. · Conduct performance evaluations, coaching, and succession planning. · Build and maintain a high-performing engineering organization. · Oversee engineering activities from concept through production and product lifecycle support. · Ensure engineering deliverables are completed on schedule, within budget, and in accordance with quality standards. · Manage engineering resources and project priorities across multiple programs. · Drive continuous improvement initiatives related to engineering processes, efficiency, and product quality. · Partner with Manufacturing, Quality, Supply Chain, and Executive Leadership to ensure successful program execution. · Support proposal development, technical reviews, and customer presentations. · Identify technical risks and implement mitigation strategies. · Ensure engineering support throughout prototype, production, testing, and sustainment phases. · Ensure compliance with customer specifications, contractual requirements, and applicable industry standards. · Support AS9100 and ISO quality management systems. · Ensure compliance with applicable government regulations related to defense programs. · Develop engineering strategies that align with company objectives. · Recommend new technologies, tools, and engineering methodologies. · Support long-term product development initiatives and continuous innovation. · Participate in executive planning and operational decision-making. Required Qualifications: · Proven track record within the Defense industry of owning and leading engineering activities in support are satisfying a customer issues that result in the successful Qualification and Production release of new products, including verification, validation, environmental testing and customer qualification in accordance contractual requirements. · Bachelor's Degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, Systems, Aerospace, Electromechanical, or related engineering discipline). · Minimum 15 years of progressive engineering experience. · Minimum 10 years of engineering management experience leading technical teams. · Required experience working within the Defense industry. · Demonstrated experience leading multidisciplinary engineering organizations. · Strong understanding of engineering design processes, product development, manufacturing support, and systems integration. · Experience managing multiple engineering projects simultaneously. · Proven ability to build, mentor, and retain high-performing engineering teams. · Excellent written, verbal, and presentation communication skills. · Strong analytical and problem-solving abilities. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will have the opportunity to work with a highly skilled team of professionals while contributing to impactful projects. We offer a collaborative environment, opportunities for professional growth, and the chance to make a difference in advancing technology. U.S. Dynamics Corporation is a leader in advanced engineering, defense technology. We are dedicated to innovation, precision, and advancing technology through applied science. Requirements:

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details: mpanter@bachrachgroup.com

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Superior Pump & Motor, an Altus Fire & Life Safety Company, is looking for a Junior Pump Mechanic to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Hourly Rate: $20.00 -$30.00 / HourResponsibilities • Assist senior technicians with the installation, inspection, maintenance, and repair of pump systems and related equipment, • Perform basic mechanical and electrical troubleshooting under supervision, • •Support service calls, preventative maintenance, and emergency response work, • Maintain accurate service documentation and reports, • Follow all safety procedures and company standards, • Travel to job sites as requiredRequired Skills, • Mechanical or electrical experience in a related field (HVAC, electrical, industrial maintenance, automotive, controls, or similar), • Strong mechanical aptitude and problem-solving skills, • Ability to work with hand and power tools, • Willingness to learn pump systems, motors, and controls, • Valid driver’s license with a clean driving record, • Ability to lift equipment and work in industrial and field environments, • Preferred (Not Required):, • Trade school or technical training, • Experience with motors, controls, or troubleshooting electrical systems, • Basic understanding of piping systemsHourly Rate: $20.00 -$30.00 / Hour

Job Description Industrial laundry services specialize in the large-scale cleaning, drying, ironing, and finishing of textiles for commercial and institutional clients. Using high-capacity machinery and advanced cleaning systems, the facility efficiently processes items such as uniforms, towels, and restaurant tablecloths while maintaining strict hygiene and quality standards. Services often include pickup, delivery, stain treatment, fabric care, and inventory management to support businesses with reliable and cost-effective textile solutions. Qualifications to Work in Industrial Laundry • Ability to operate or learn industrial laundry equipment, • Physical stamina to stand for long periods and lift heavy loads, • Attention to detail when sorting and inspecting laundry items, • Basic understanding of safety and sanitation procedures, • Ability to work in a fast-paced team environment, • Good time management and organizational skills, • Reliable attendance and strong work ethic, • Ability to follow instructions and workplace policies, • Previous laundry, housekeeping, warehouse, or manufacturing experience preferred but not required

Business Planning & Channel Support Specialist - Document Scanners & Specialty Printer US-NY-Melville Job ID: 34457 Type: Full-Time # of Openings: 1 Category: Sales Support CUSA Melville Headquarters About the Role Canon USA in Melville, NY is currently seeking a Business Planning & Channel Support Specialist - Document Scanners & Specialty Printer (Specialist, Business Planning). The Business Planning & Channel Support Specialist - Document Scanners & Specialty Printer is responsible for developing and executing business planning, inventory and procurement control. Additionally, the role supports B2B partners in the US market to maximize sales performance, optimize inventory, and ensure successful product launches. This position requires analytical capabilities, cross-functional collaboration skills, and the ability to work effectively with internal/external members. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. Your Impact Business Planning for Scanner and Specialty Printer Conduct market, competitor, and channel analysis across US Market Develop Strategic Plans Support budgeting and monthly business reviews Create and improve demand forecasts Sales & Operations Planning (S&OP) Inventory management Procurement control Process improvement US B2B Channel Partner Support Support key B2B partners (e.g., Reseller/Direct Marketer/Dealer/WTS) Analyze POS and inventory data to identify growth opportunities Plan and execute channel promotions and marketing programs Optimize online product pages and digital assets Coordinate new product launch planning with partners Identify and resolve issues related to demand shifts or inventory imbalance Prepare sales performance reports and propose improvement actions About You: The Skills & Expertise You Bring Bachelor's degree in Business, Marketing, Economics, Supply Chain, or related field preferred or equivalent experience required, plus 3 to 5 years of related experience Experience working with multinational teams is highly desirable Proficiency with spreadsheet and business analytics tools Experience with MS Office and Google Workspace Experience with BI tools (Power BI, Tableau) is a plus Up to 25% travel is required Ability to work during peak periods or time-zone-shifted meetings when needed Individual must possess a clean valid state driver's license in order to obtain the position This position requires driving, therefore a valid driver's license and acceptable driving record are necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies We are providing the anticipated salary range for this role: $69,300 - $103,770 annually. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at www.usa.canon.com (www.usa.canon.comtarget=) and connect with us on LinkedIn at https://www.linkedin.com/company/canonusa (https://www.linkedin.com/company/canonusatarget=) . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at https://www.usa.canon.com/about-us/life-at-canon/benefits-and-compensation (https://www.usa.canon.com/about-us/life-at-canon/benefits-and-compensation) We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site https://www.usa.canon.com/about-us/life-at-canon ( https://www.usa.canon.com/about-us/life-at-canon) , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at https://www.usa.canon.com/about-us/life-at-canon ( https://www.usa.canon.com/about-us/life-at-canon) . #CUSA Posting Tags #PM19 #LI-AV1 #LI-HYBRID Compensation details: 69300-103770 Yearly Salary PIec4f7026c083-37820-40800139

WALK IN WEDNESDAYS!!!! Every Wednesday from 10AM-2PM Pay Range: $27.00-$29.00 What is the value of a WM Job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth : Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. I. Job Summary Drivers operate heavy-duty trucks with front, side, or rear-end load lift attachments dependent on the line of business they're operating in and the type of truck they're operating. Drivers will transport the material to a disposal, transfer or recycle facility when trucks reach legal load capacity. Commercial Drivers are responsible for providing the pick-up service of containers filled with waste or recyclable material. Containers may weigh in excess of 1,000 pounds and at times require drivers to maneuver wheeled containers to a pick-up stage area. Commercial Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Highly skilled backing maneuvers are essential to successfully perform this job. Residential Drivers are responsible for the collection of residential household waste or recyclable material and must safely maneuver vehicles in residential environments. Residential Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Roll-off Drivers are responsible for preparing, loading, and transporting large mobile open-top and compactor containers from customer locations. Roll-off Drivers will navigate driveways, alleyways, lots, and high-traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. II. Essential Duties and Responsibilities + Operates vehicle in accordance with Waste Management Safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws. + Performs pre and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report). + Immediately reports all unsafe situations or service-related issues to Operations Manager or Dispatch. + Attends and participates in all scheduled training programs, briefings, and meetings as required by WM or directed by the Route Manager. + Works closely with Operations Manager to improve route efficiencies and identify best practices. + Notifies Operations Manager of any incidents, accidents, injuries, or property damage. + Notifies Operations Manager or Dispatch of service interruptions including closed or impassable streets or alleyways, receptacles too heavy to service or potential safety hazards. + Communicates customer requests to Operations Manager or Dispatch. + Completely dumps all receptacles and leaves the customer's location clean and free of debris. + Follows route assignments as directed and completes end-of-day documentation and check-out process. + Performs all duties as scheduled by Operations Manager or Dispatch and assists other drivers as directed to meet customer needs. III. Qualifications A. Required Qualifications + 1 year operating a vehicle requiring a CDL or + 1 year equivalent military driving within the last 7 years and + Must be at least 18 years of age and legally eligible to work in the country where the position is located and + Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports. + Successfully complete pre-employment screening, including drug screen and physical + Commercial Driver License (CDL) Class A with an air-brake endorsement or + Commercial Driver License (CDL) Class B with an air-brake endorsement B. Preferred Qualifications + High School Diploma or GED (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. + Standing + Walking + Lifting + Pushing + Pulling + Crouching + Reaching + Handling + Sitting + Talking + Hearing This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing-including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing-in accordance with government regulations and company policies. Pay : The expected base pay range for this on-site position is $27.00 - $29.00. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate's relevant experience, education, training, certifications, qualifications, and work location. V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran

Walk in Wednesdays!! Pay Range: $25.00-$30.00 Shift: Monday-Friday, 3-5am start time Job Summary: Drivers operate heavy-duty trucks with front, side, or rear-end load lift attachments dependent on the line of business they're operating in and the type of truck they're operating. Drivers will transport the material to a disposal, transfer or recycle facility when trucks reach legal load capacity. Commercial Drivers are responsible for providing the pick-up service of containers filled with waste or recyclable material. Containers may weigh in excess of 1,000 pounds and at times require drivers to maneuver wheeled containers to a pick-up stage area. Commercial Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Highly skilled backing maneuvers are essential to successfully perform this job. Residential Drivers are responsible for the collection of residential household waste or recyclable material and must safely maneuver vehicles in residential environments. Residential Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Roll-off Drivers are responsible for preparing, loading, and transporting large mobile open-top and compactor containers from customer locations. Roll-off Drivers will navigate driveways, alleyways, lots, and high-traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. Essential Duties and Responsibilities: • Operates vehicle in accordance with Waste Management Safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws., • Performs pre and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report)., • Immediately reports all unsafe situations or service-related issues to Operations Manager or Dispatch., • Attends and participates in all scheduled training programs, briefings, and meetings as required by WM or directed by the Route Manager., • Works closely with Operations Manager to improve route efficiencies and identify best practices., • Notifies Operations Manager of any incidents, accidents, injuries, or property damage., • Notifies Operations Manager or Dispatch of service interruptions including closed or impassable streets or alleyways, receptacles too heavy to service or potential safety hazards., • Communicates customer requests to Operations Manager or Dispatch., • Completely dumps all receptacles and leaves the customer's location clean and free of debris., • Follows route assignments as directed and completes end-of-day documentation and check-out process., • Performs all duties as scheduled by Operations Manager or Dispatch and assists other drivers as directed to meet customer needs. Qualifications: A. Required Qualifications • 1 year operating a vehicle requiring a CDL or, • 1 year equivalent military driving within the last 7 years and, • Must be at least 18 years of age and legally eligible to work in the country where the position is located and, • Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports and, • Successfully complete pre-employment screening, including drug screen and physical, • Commercial Driver License (CDL) Class A with an air-brake endorsement or, • Commercial Driver License (CDL) Class B with an air-brake endorsement B. Preferred Qualifications: • High School Diploma or GED (accredited) Physical Requirements: • Standing, • Walking, • Lifting, • Pushing, • Pulling, • Crouching, • Reaching, • Handling, • Sitting, • Talking, • Hearing This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. Pay: The expected base pay range for this on-site position is $ - $ . This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate's relevant experience, education, training, certifications, qualifications, and work location. Benefits: At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site.

WALK IN WEDNESDAYS!!!! Every Wednesday from 10AM-2PM Pay Range: $27.00-$29.00 What is the value of a WM job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth: Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. I. Job Summary Drivers operate heavy-duty trucks with front, side, or rear-end load lift attachments dependent on the line of business they're operating in and the type of truck they're operating. Drivers will transport the material to a disposal, transfer or recycle facility when trucks reach legal load capacity. Commercial Drivers are responsible for providing the pick-up service of containers filled with waste or recyclable material. Containers may weigh in excess of 1,000 pounds and at times require drivers to maneuver wheeled containers to a pick-up stage area. Commercial Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Highly skilled backing maneuvers are essential to successfully perform this job. Residential Drivers are responsible for the collection of residential household waste or recyclable material and must safely maneuver vehicles in residential environments. Residential Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Roll-off Drivers are responsible for preparing, loading, and transporting large mobile open-top and compactor containers from customer locations. Roll-off Drivers will navigate driveways, alleyways, lots, and high-traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. II. Essential Duties and Responsibilities • Operates vehicle in accordance with Waste Management Safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws., • Performs pre and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report)., • Immediately reports all unsafe situations or service-related issues to Operations Manager or Dispatch., • Attends and participates in all scheduled training programs, briefings, and meetings as required by WM or directed by the Route Manager., • Works closely with Operations Manager to improve route efficiencies and identify best practices., • Notifies Operations Manager of any incidents, accidents, injuries, or property damage., • Notifies Operations Manager or Dispatch of service interruptions including closed or impassable streets or alleyways, receptacles too heavy to service or potential safety hazards., • Communicates customer requests to Operations Manager or Dispatch., • Completely dumps all receptacles and leaves the customer's location clean and free of debris., • Follows route assignments as directed and completes end-of-day documentation and check-out process., • Performs all duties as scheduled by Operations Manager or Dispatch and assists other drivers as directed to meet customer needs. III. Qualifications A. Required Qualifications • 1 year operating a vehicle requiring a CDL or, • 1 year equivalent military driving within the last 7 years and, • Must be at least 18 years of age and legally eligible to work in the country where the position is located and, • Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports., • Successfully complete pre-employment screening, including drug screen and physical, • Commercial Driver License (CDL) Class A with an air-brake endorsement or, • Commercial Driver License (CDL) Class B with an air-brake endorsement B. Preferred Qualifications • High School Diploma or GED (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. • Standing, • Walking, • Lifting, • Pushing, • Pulling, • Crouching, • Reaching, • Handling, • Sitting, • Talking, • Hearing This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.

Walk in Wednesdays!! Pay Range: $27.00-$29.00 Shift: Monday-Friday, 3-5am start time What is the value of a WM Job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth: Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. I. Job Summary Drivers operate heavy-duty trucks with front, side, or rear-end load lift attachments dependent on the line of business they're operating in and the type of truck they're operating. Drivers will transport the material to a disposal, transfer or recycle facility when trucks reach legal load capacity. Commercial Drivers are responsible for providing the pick-up service of containers filled with waste or recyclable material. Containers may weigh in excess of 1,000 pounds and at times require drivers to maneuver wheeled containers to a pick-up stage area. Commercial Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Highly skilled backing maneuvers are essential to successfully perform this job. Residential Drivers are responsible for the collection of residential household waste or recyclable material and must safely maneuver vehicles in residential environments. Residential Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Roll-off Drivers are responsible for preparing, loading, and transporting large mobile open-top and compactor containers from customer locations. Roll-off Drivers will navigate driveways, alleyways, lots, and high-traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. II. Essential Duties and Responsibilities + Operates vehicle in accordance with Waste Management Safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws. + Performs pre and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report). + Immediately reports all unsafe situations or service-related issues to Operations Manager or Dispatch. + Attends and participates in all scheduled training programs, briefings, and meetings as required by WM or directed by the Route Manager. + Works closely with Operations Manager to improve route efficiencies and identify best practices. + Notifies Operations Manager of any incidents, accidents, injuries, or property damage. + Notifies Operations Manager or Dispatch of service interruptions including closed or impassable streets or alleyways, receptacles too heavy to service or potential safety hazards. + Communicates customer requests to Operations Manager or Dispatch. + Completely dumps all receptacles and leaves the customer's location clean and free of debris. + Follows route assignments as directed and completes end-of-day documentation and check-out process. + Performs all duties as scheduled by Operations Manager or Dispatch and assists other drivers as directed to meet customer needs. III. Qualifications A. Required Qualifications + 1 year operating a vehicle requiring a CDL or + 1 year equivalent military driving within the last 7 years and + Must be at least 18 years of age and legally eligible to work in the country where the position is located and + Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports and + Successfully complete pre-employment screening, including drug screen and physical + Commercial Driver License (CDL) Class A with an air-brake endorsement or + Commercial Driver License (CDL) Class B with an air-brake endorsement B. Preferred Qualifications + High School Diploma or GED (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. + Standing + Walking + Lifting + Pushing + Pulling + Crouching + Reaching + Handling + Sitting + Talking + Hearing This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing-including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing-in accordance with government regulations and company policies. Pay : The expected base pay range for this on-site position is $27.00 - $29.00. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate's relevant experience, education, training, certifications, qualifications, and work location V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran

Job Description Rugby Architectural Building Products is a wholesale distributor of specialty building products, operating out of 26 branches throughout the United States. Our primary business is non-structural architectural grade building products sold principally to customers who create and produce end-products for the commercial, industrial, retail, residential and institutional markets. (In New Century, KS, Lebanon, TN, and Rockford, IL – we do business as: Olathe Millwork, Warren Brothers, River City Millwork respectfully.) Position Summary: As a highly motivated sales and distribution entrepreneur, you will be responsible for directing and coordinating all activities as Branch Manager of our Greenvale, NY Branch. You will have the satisfaction of providing day-to-day supervision and leadership, plan and assign work; implement policies and procedures; increase employee’s skills and capabilities; and continuously improves productivity, equipment, operating procedures and working conditions. Ensure inventory and shipping/receiving functions of branch are operating at levels which exceed customers’ needs and expectations while also maintaining the company mission to be the best supplier, the best partner to our vendors. The Branch Manager will report to the Area Manager. What’s in It for You: • Salary: $85,000 - $105,000, depending on experience, • Branch Bonus Incentives, • Paid Time Off & Paid Holidays, • Competitive Medical – Dental – Vision, • Short Term - Long-Term Disability - Life Insurance, • 401(k) Traditional & Roth with Match, • Voluntary Identity Theft & Legal Services, • Corporate Wellness & Appreciation Programs Duties and Responsibilities (Essential Functions): • Drive new business development with intensity, increase sales and profitability of the distribution center, increasing market share, • Understanding of the P & L and will have full responsibility, • Provide superior customer service, • Optimize performance of Inside and Outside Sales Teams to maximize sales and gross margin per employee., • Manage both distribution centers operating costs to minimize operating expense per employee., • Evaluate, coach and develop all personnel to assist them in realizing their maximum individual potential and meet the Rugby mission of “best place to work”., • Manage Rugby safety policy., • Manage our distribution center assets including inventory and accounts receivable to established inventory turns and earns, dead stock, shrinkage, DSO and bad debt targets, • Represent Rugby to all business partners to the highest professional standard and strive for the Rugby mission of “Best Customer” status to our manufacturer supplier. Knowledge, Skills & Experience: • 5 years of distribution or manufacturing management experience, including sales management and business development responsibilities., • Candidate must have a documented management and sales profile., • Ability to thrive in a highly entrepreneurial, de-centralized, high-accountability, and performance-driven culture., • Proven experience providing branded and generic products in a B2B environment., • Proven success transitioning from high individual sales performance to a coaching/leadership role., • Excellent communication skills (verbal, written, presentation) including the ability to communicate effectively to all levels of an organization both internally and externally. Must have strong telephone skills., • Proven customer relationship building skills, both internally and externally with outstanding influencing and negotiation skills., • Experience with physical inventory and cycle counting procedures, • Proficient with Microsoft Word, Excel, and Outlook., • Proven leadership skills and demonstrated ability to successfully lead large-scale departmental or company initiatives., • Outstanding project management and organizational skills with the ability to work across multiple functions in an organization., • Excellent forecasting and reporting skills., • Strong management, problem-solving and leadership skills with demonstrated ability to successfully lead large-scale departmental or company-wide initiatives., • Ability to teach, train and cultivate future leaders for the organization., • Must have an intense passion for success and growth., • Knowledge of Agility software a plus At Rugby, our goal is to lead the industry! We will accomplish this goal by creating an environment where each team member is challenged to achieve their personal best using their talent, together building a community based on our values of Fairness, Commitment to Excellence, and maintaining Rugby as a Performance Meritocracy. #RABP1

Job Description Regional Business Leader | Multi-Unit Leadership | $100K-$110K $100,000-$110,000 Annual Compensation Lead a $30M business. Shape regional strategy. Develop exceptional leaders. Drive long-term growth. Are you an executive-minded leader who enjoys building businesses, developing people, and delivering measurable financial results? Auto-Chlor System is seeking an experienced Regional Business Leader to oversee a $30M multi-branch region across New York City, Queens, the Bronx, and Connecticut. This is an opportunity to lead one of our largest regions while partnering directly with executive leadership to shape business strategy, strengthen leadership teams, and drive sustainable growth. This role goes beyond managing daily operations. You'll be responsible for building a high-performing organization by developing Branch Managers, improving financial performance, identifying growth opportunities, and creating a culture of accountability and continuous improvement. We're looking for a leader who thinks like a business owner, leads from the front, and enjoys spending time in the field supporting teams, customers, and branch performance. If you've successfully led multiple business units, owned P&Ls, developed exceptional leaders, and consistently delivered business results, we'd love to speak with you. Why Join Auto-Chlor? • Lead a $30M+ multi-branch business, • Partner directly with executive leadership, • Own regional financial performance and long-term growth, • Competitive compensation of $100,000-$110,000, • Company vehicle, technology, and travel support, • Opportunity to shape the future of one of Auto-Chlor's largest regions, • Join a stable, growing company committed to developing leaders from within What You'll Do • Provide strategic leadership across multiple branch locations, • Own regional financial performance, profitability, and long-term business growth, • Develop Branch Managers, Supervisors, and future leadership talent, • Drive accountability through P&L management, operational KPIs, and business planning, • Identify opportunities to improve market share, customer retention, and branch performance, • Partner with executive leadership to execute regional growth initiatives, • Recruit, hire, and develop high-performing leadership teams, • Travel throughout the region to support branches, develop leaders, and strengthen customer relationships Ideal Background • Experience leading multiple business units or branch locations, • P&L ownership with responsibility for financial performance, • Experience developing Branch Managers and leadership teams, • Strong strategic thinking and business acumen, • Sales leadership and customer growth experience, • Experience in service, distribution, logistics, staffing, facilities, uniforms, foodservice, industrial services, equipment rental, or a related industry, • Willingness to travel throughout the New York Metro region Ready to Lead a Business, Not Just Manage One? Apply Today. If you're an experienced executive leader who enjoys building teams, growing businesses, and making a lasting impact, we'd love to hear from you. Apply today and help lead one of Auto-Chlor's largest and most successful regions.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides technical electrician and electronic repair skills to ensure the efficient installation and maintenance of the various electrical and/or electronic equipment, devices and circuitry, required to operate the various facilities throughout the project sites. Primary Duties/Responsibilities: • Maintain and check for proper operation of the equipment, devices and circuits throughout the treatment facility., • Install, repair, and maintain highly technical electrical equipment for the plant including, but not limited to, motors, starters, switches, motorized valves, solid state electronic components, programmable controllers, interlock circuits, conduit, and wiring working on a variety of voltages (AC and DC) and 120v. To 4160V. Electrical circuitry/power delivery systems. Operate and maintain power delivery systems., • Interpret schematic diagrams for the purpose of troubleshooting and update schematic wiring diagrams., • Provide technical electrical and electronics repair skills by proficiently operating specialized equipment including but not limited to, forklift, bucket truck, pick-up truck and various hand tools., • May advise management whether continued operation of equipment, devices, circuits and controls would be feasible or hazardous or whether the installation of new or rebuilt electrical equipment is appropriate., • Coordinate and direct the activities of other employees assigned to assist electricians in the completion of work assignments., • Maintain manual and/or computerized work orders and records as directed, • May perform on site inspections to determine proper measurement for replacement parts, • Responsible for inspecting and ensuring that all assigned projects are completed fully and accurately., • Responsible for general housekeeping of shop, job sites, work areas and other areas as assigned including, but not limited to, sweeping, dusting, mopping and cleaning as necessary to maintain areas to Company standards., • Observe all on-the-job safety regulations., • Other related tasks as assigned., • Ability to use voltage testers, megger meters, ammeters, ohmmeter, current and voltage recorders, and a multimeter Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Five (5) years of experience as an electrician in an industrial environment, • Two years of related education at a college, trade school or equivalent may be substituted for experience., • Experience troubleshooting and diagnosing Variable Frequency Drive. Knowledge/Skills/Abilities: • Ability to read and understand operating manuals and written instructions, complex wiring diagrams, schematics, blueprints and technical materials., • Knowledge of algebra, geometry and trigonometry and knowledge of treatment plant machines and proper procedures for electrical and HVAC maintenance and repair., • Knowledge of and/or experience with electrical codes, principles and theories applicable to the installation and maintenance of electrical equipment to include solid state electronic components and electrical/electronic circuits., • Knowledge of and to work with power sources from low DC millivolts to 15KV volts AC, both single phase and multiphase circuits., • Proficient in interpretation of schematic wiring diagrams., • Ability to use electrical and other testing equipment to analyze problems., • Working knowledge of FCC regulations for operation of radios and other communication equipment., • Ability to communicate effectively with others, orally and in writing. Ability to follow oral and written instructions., • Ability to use a variety of tools including, but not limited, hammers, wrenches, metal snips, electric drill, pipe cutter and bender, and acetylene torches., • Skill in safe and efficient operation of motorized and non-motorized equipment., • Working knowledge of the, NEC, NFPA-70E. Required Certification/Licenses/Training: • Valid NYS driver’s license and ability to meet risk management guidelines., • Completion of recognized Apprenticeship program., • Osha - 10 Additional Information Pay Rate: $49.90 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Clean Harbors in North Amityville, NY is seeking a Field Service Supervisor to plan, lead, organize and coordinate the daily operations of the service line crew. This includes responsibility over proper operation of equipment, driving operational efficiencies at the work site and ensuring accurate documentation related to the job is completed in a timely fashion. TRAVEL / ON CALL / EMERGENCY RESPONSE Hourly Range - $32.00 - $33.00 Please note: All new hires must attend a two-week training academy; travel expenses are paid by the company and per diem is provided. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Recruiting Pay range Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement RESPONSIBILITIES • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Read work order and ensures all required equipment is available and operational prior to starting jobs, • Inspects equipment and general work area prior to starting any job, • Correct deficiencies that may cause accidents, injuries, lost productivity or harm to equipment or that are inconsistent with client's requirements, • Communicate Performs preventative and corrective maintenance on equipment when required, • Completes all appropriate paperwork including service receipts, and submits to designated management, • Train Technicians I and II in equipment operation and service line processes, • Operate all necessary equipment in service line in accordance with operation training and safety procedures, • Practice safety procedures in accordance with training and guidelines when working, • Provide industrial services using appropriate techniques including handwork or manual work in accordance with established methods and applicable regulations, • Manually cleans, installs, fits, repairs valves, caps, hoses, pumps, gaskets and all other external and internal equipment on projects, • Understanding of equipment maintenance and ability to perform maintenance utilizing supplied breathing air and applicable personal protective equipment, • Maintain good housekeeping and cleanliness in the cleaning areas, • Check equipment at the start of each shift, • Lead safety meeting and ensure HPC safety policies are followed, • Meet progress deadlines and efficiently utilizes resources, • Instruct, provide feedback and direct and assist crew in performance of job duties to complete work in accordance with client requirements and Company policies, practices and procedures, • Enforce Company employee policies and may remove employee from job when required, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Performs other duties as assigned, • By position, ability to be on call for emergency response on rotating basis every other week, • By position, site-remediation, equipment decontamination, and the handling of hazardous materials QUALIFICATIONS • Environmental field service operations, construction, manufacturing, or similar industry experience, • Ability to travel overnight up to 2-4 nights per month, • Ability to be on-call for emergency response situations, • Ability to pull a trailer via pick-up truck preferred, • Ability to interface with clients and management, • Ability to manage project related vendors, • Ability to manage, reconcile, and review all job-related documentation, • Ability to work in confined spaces for periods of time, • Valid Driver’s license, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position Preferred Qualifications:, • Experience in industrial emergency response, Hazmat clean-up, confined space entry, • Supervising/working in confined spaces Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Business Planning Specialist US-NY-Melville Job ID: 34376 Type: Full-Time of Openings: 1 Category: Sales/Business Development CUSA Melville Headquarters About the Role The Business Planning Specialist is responsible for developing and analyzing strategic plans to grow Canon's product and service portfolio, enhancing revenue and market share. This role combines market research, strategic planning, and cross-functional collaboration to identify growth opportunities and execute initiatives effectively. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. Your Impact This role is for a proactive and detail oriented professional who will lead business planning efforts with a strong focus on project management, driving sales and process improvement. Unlike traditional planning roles that emphasize reporting and data consolidation, this position requires active engagement cross-functionally to push both top-line growth and bottom-line efficiency, along with certain regular business planning support. • Manage and lead key strategic initiatives cross-functionally as assigned that align with business objectives, • Actively engage with and challenge the sales, marketing and service teams to drive achievement of business strategy and targets, • Visit customers, partners, and trade events to understand their business needs, competitive activities and market conditions as necessary, • Provide analytical and strategic input into, but limited to, marketing performance, budget planning and product allocation, • Administer and maintain regular Business Planning activities related to the execution of key objectives, • Support decision-making with actionable insights, not just data reporting About You: The Skills & Expertise You Bring • Bachelor's degree in a relevant field or equivalent experience required, plus 3 to 5 years of related experience, • Prior sales or business development/planning experience is a plus, • Business negotiations skills required, • Project management experience is a plus, • Good analytical skills, • Presentation skills required, • Excellent communication skills both verbal and written required, • MS Office and Google Workspace experience, • Up to 25% travel required, • Individual must possess a clean valid state driver's license in order to obtain the position, • This position requires driving, therefore a valid driver's license and acceptable driving record are necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies We are providing the anticipated salary range for this role: $66,300 - $81,550 annually. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at _ We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-AV1 #LI-HYBRID Compensation details: 66300-81550 Yearly Salary PI755fc0fde52d-26276-40760772

Job DescriptionDescription: GenServe, LLC is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales in the United States, serving primarily commercial customers in various industries. The company’s plan is to continue to accelerate its already rapid growth through further investments in organic sales growth and acquisitions. The Company’s complete and extensive service platform positions it as a one-stop shop for all commercial generator maintenance needs. Established in 1990, the Company has the largest team of Electrical Generating Systems Association (EGSA) certified technicians in the Northeast and an expanding footprint in other regions. GenServe is headquartered in Plainview, NY, with branch offices in New Jersey, Pennsylvania, Illinois, Florida, Texas, and California and is accelerating its growth into new territories across North America. In August 2024, the Company was acquired by private equity firm Aurora Capital Partners. Key Responsibilities: Renewals Specialist • Manage a portfolio of commercial service agreements beginning approximately 180 days prior to contract expiration through successful renewal., • Develop and execute account-specific renewal strategies focused on customer retention, contract profitability, and long-term account growth., • Maintain a proactive renewal pipeline and ensure timely delivery of renewal proposals., • Identify accounts at risk of non-renewal and implement action plans to improve retention outcomes., • Conduct renewal discussions and negotiations while maintaining pricing and profitability objectives.Contract Analysis & Risk Assessment, • Analyze renewal probability by evaluating:, • Service history and issue resolution, • Contract profitability, • Pricing competitiveness, • Assess contract performance and identify opportunities to improve profitability while maintaining customer value.Pricing Strategy & Proposal Development, • Develop renewal pricing recommendations aligned with business objectives and market conditions., • Evaluate labor, material, and operational cost changes impacting contract profitability., • Prepare professional renewal proposals that clearly communicate service value and customer benefits., • Support pricing adjustments and contract modifications while maintaining margin expectations.Customer Engagement & Relationship Management, • Execute a structured customer touchpoint strategy throughout the agreement lifecycle., • Build and maintain strong customer relationships through proactive communication., • Conduct renewal discussions and negotiations using value-based selling principles., • Address customer concerns and coordinate internal resources to strengthen customer satisfaction and retention.Cross-Functional Collaboration, • Partner with Service Operations, Sales, Accounting, Customer Support, and Finance teams to:, • Resolve customer issues impacting satisfaction and retention., • Assess contract profitability and develop pricing recommendations., • Ensure customer concerns are addressed prior to renewal discussions., • Provide customer and market feedback to internal stakeholders to support continuous improvement initiatives.Account Growth & Expansion, • Identify opportunities to expand customer service portfolios and increase account value., • Generate incremental revenue through upselling and cross-selling opportunities within existing accounts., • Generate qualified leads and referrals for Account Managers when larger sales opportunities are identified.CRM, Forecasting & Reporting, • Maintain accurate customer records, renewal opportunities, forecasts, and account activity within CRM systems., • Track and document all customer interactions and renewal-related activities., • Provide accurate forecasting of renewal probabilities, contract value, and expected revenue., • Monitor and report on retention, pricing, profitability, and account growth metrics.Requirements: Preferred Qualifications • Associate’s or Bachelor’s degree in Business, Marketing, Communications, or a related field preferred; equivalent professional experience will be considered., • 3 - 5 years of experience in customer service, account management, contract renewals, inside sales, customer success, or a related customer-facing role., • Experience managing service agreements, maintenance contracts, or subscription-based renewals., • Strong communication and relationship-building skills with the ability to engage customers effectively through phone and email., • Ability to manage a high-volume workload while maintaining accuracy, attention to detail, and strong organizational standards., • Customer-focused mindset with strong problem-solving skills and the ability to identify renewal, retention, and upsell opportunities., • Proficiency with CRM and Microsoft Office applications; experience with Salesforce, Sage, or similar platforms is a plus., • Knowledge of contract lifecycle management, pricing, quoting, and customer retention strategies., • Experience in the generator, power systems, industrial equipment, HVAC, facilities maintenance, or related service industries preferred., • Proven ability to meet renewal, retention, or sales performance goals in a fast-paced environment., • Self-motivated, goal-oriented, and capable of independently prioritizing multiple responsibilities and deadlines. Core Competencies • Contract Negotiation, • Financial & Profitability Analysis, • Pricing Strategy, • Value-Based Selling, • Relationship Management, • Forecasting & Pipeline Management, • Problem Solving, • Cross-Functional Collaboration

Sales Trainer (Field Instructor) - Bilingual US-NY-Melville Job ID: 34371 Type: Full-Time 1 Category: Education/Training CUSA Melville Headquarters About the Role Do you enjoy facilitating learning for sales teams and seek a new opportunity with an industry leader? Canon U.S.A., Inc. seeks an experienced Field Instructor (Instructor, Field) in any of the following regional locations: Atlanta,GA, Dallas, TX, Irvine, CA, Itasca, IL, Jamesburg, NJ, or Melville, NY. Bring your experience to Canon where you can train other professionals to capitalize on Canon's wide range of imaging solutions! Note: Bilingual proficiency in English and Spanish (written and verbal) is required. The base salary for this position will vary based on geography and other factors * Your Impact Support the sales team by providing Virtual and Instructor Led training to selling organizations (Canon USA, Dealers and subsidiary sales forces) and increase sales of Canon solutions in the marketplace. Conduct training on sales skills, products and technology programs Observe, Coach and train other instructors and provide ongoing support Subject matter expert on supported programs and execute first delivery for development and model for other instructors Liase with dealer management to ensure appropriate programs are delivered at the highest quality and aligned with performance goals Communicate changes and updates to supported programs and identify changes that affect course content Work with sales professionals at their location or at a Canon Sales Training location nationwide to position products in the market and increase prospects Utilize a variety of facilitation and instructional strategies to lead discussions and hands-on student activities Successfully pass Qualification processes required to teach each course Assist in creating curriculum and curriculum review Travel is required for Instructor led facilitation of classes and to coach sales representatives in the field as assigned by management. Virtual Training is performed via "Hands on" Labs in Canon Training locations About You: The Skills & Expertise You Bring Bachelor's Degree in a relevant field or equivalent experience is required. Bachelor degree is highly preferred, plus 3-5 years of related experience delivering skills and product training to sales professionals. This position requires successful sales skills knowledge and experience. Virtual Training experience is a plus. Experience must include measurable results oriented objectives (i.e. sales role with commission/bonus structure). Requires up to 75% coast to coast/overnight travel. Requires knowledge of digital technology and related software products in the print industry. Excellent communication, presentation and high-level facilitation skills. Ability to successfully complete delivery certification process to facilitate a successful course. This position requires driving for company business as an essential function of the job and must remain in compliance with company safety guidelines and policies. Ability to work flexible time zones. Bilingual proficiency in English and Spanish (written and verbal) is required. We are providing the anticipated base salary range for this role: $54,460 - $81,550 annually. We are providing the anticipated base salary for this role if filled in New York $66,300 - $81,550 annually We are providing the anticipated base salary for this role if filled in California: $70,310 - $81,550 annually Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at www.usa.canon.com and connect with us on LinkedIn at _ Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at _ We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site https://www.usa.canon.com/about-us/life-at-canon, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at https://www.usa.canon.com/about-us/life-at-canon Posting Tags #PM19 #LI-NF1 #LI-REMOTE Compensation details: 54460-81550 Yearly Salary PI5b2b90711571-37476-40489394

Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. As a Security Officer Cosmetics Store in Melville, NY , you will serve and safeguard clients in a range of industries such as Manufacturing & Industrial, and more. As an Unarmed Patrol Officer at a manufacturing and industrial location, you will conduct routine patrols, maintain a visible presence to help deter security-related incidents, and support a welcoming environment for employees and visitors. You will provide exceptional customer service, communicate clearly, and contribute to Allied Universal's agile, reliable, innovative, and people-first culture through teamwork and integrity. Position Type: Full Time Pay Rate: $17.58 / Hour Job Schedule: Day Time Mon11:00 PM - 07:00 AM Tue11:00 PM - 07:00 AM Wed11:00 PM - 07:00 AM Thur11:00 PM - 07:00 AM Sun11:00 PM - 07:00 AM What You'll Do: + Provide customer service to clients, employees, contractors, and visitors by carrying out security-related procedures, site-specific policies, and emergency response activities as appropriate. + Respond to incidents, alarms, access-control concerns, and critical situations in a calm, professional, problem-solving manner, following established reporting procedures. + Conduct regular and random unarmed patrols of manufacturing, production, warehouse, shipping, receiving, office, and perimeter areas to help identify unusual activity and security-related concerns. + Monitor access points and visitor activity, verify credentials as directed, and assist with maintaining orderly entry and exit at the location. + Document patrols, incidents, observations, and shift activities in required reports, and communicate relevant information to site management and Allied Universal leadership. Minimum Requirements: + A state, county, or city-issued security-related license is preferred. + Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles. + Possess a high school diploma or equivalent. + As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws. + Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws. + As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law. + Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. + A valid driver's license will be required for driving positions only. Why Join Us: + Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more. + Career Growth: Get paid training and access to career growth opportunities. + Financial and Health Benefits: Enjoy access to a retirement savings plan, plus medical, dental, vision, basic life and AD&D, and disability insurance. + Exclusive Perks: Enjoy discounts on top brands and services through our Perks Program. Licensed by the New York State Department of State Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com . If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices . Job ID: 2026-1645026 Location: United States-New York-Melville Job Category: Security Officer

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini-Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive web site. Position Summary: The Customer Service Representative (CSR) is a learning?oriented, support?focused role within the Inside Sales organization. The position is responsible for performing essential administrative sales and customer support tasks while developing foundational knowledge of products, systems, and sales processes. This role supports the Inside Sales Teams through transactional execution and guided exposure to account?related activities. The role is designed to build readiness for future roles; advancement is encouraged and is based on demonstrated readiness, performance, and business needs. Salary Range: $21.15/hr. - $25.50/hr. Job Function: • Process and execute customer orders and quotations in accordance with departmental procedures, • Handle incoming internal and external customer calls and inquiries, • Provide general customer service and sales support, • Maintain customer account data and sales databases with current and accurate customer requirements, • Liaise between customers and internal departments to support accurate and timely fulfillment, • Identify customer issues or constraints and escalate appropriately for resolution, • Assist with preparation of pricing review materials for management consideration, • Support documentation and follow?up related to customer contracts and agreements, • Assist with new customer account setup and administrative maintenance, • Follow up on samples, quotes, and web inquiries as directed to support opportunity development, • Provide limited, task?based operational support to Inside Sales teams as needed, • Participate in training, coaching, and development activities to build foundational understanding of systems, processes, and general product awareness The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: • Associate degree or 2+ years' sales-related experience, • Proficient in MS Office (Word, Excel, Outlook), • Experience with ERP/CRM related software preferred, • Strong verbal and written communication skills, • Customer?focused with strong attention to detail, • Organized and able to manage multiple priorities, • Ability to work in a deadline?driven environment, • Strong team player with a positive attitude and willingness to learn, • Must be a US Citizen or US Permanent Resident (green card holder) due to ITAR compliance Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cultural Focus: • Displays enthusiasm and Passion for their work, • Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement, • Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals, • Operates with the mindset of Customer Obsession by meeting or exceeding expectations to both internal and external customers, • Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions, • Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail, • Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork, • Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect Additional Requirements/Skills: • Comply, understand, and support corporate safety initiatives to ensure a safe work environment, • Ability and willingness to abide by Company's Code of Conduct Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

The Industry Specialized Program for Select Commercial Insurance Sales Producer is a comprehensive sales and insurance program focused on outside sales driving new business sales revenue growth of commercial business clients ($10mm and under in sales). In addition to cross-selling referrals from other internal business units, this role is expected to establish additional wins through an assigned book of qualified prospects within an industry specialization, Construction, Commercial Real Estate, Healthcare or Industrial. The Industry Specialized Program is designed to develop insurance industry knowledge, obtain insurance licensing, and focus on outside sales opportunities while leveraging current industry knowledge. Primary responsibilities include achieving new business sales goals on an annualized basis based on our target market of companies with sales of less than $10mm, creating positive synergy and pursuing cross-selling opportunities with other practices to meet revenue growth targets, generating sufficient new business leads and first appointment activity volume, demonstrating the ability to identify and overcome sales obstacles on a prospect-specific basis, demonstrating proficiency in the discovery process and promoting USI's competitive differentiation, developing relationships and achieving new business goals within a specific industry specialization, systematically using CRM to support sales processes, attending and actively participating in USI Industry Specialized Program, USI University and USI Select ONE Academy, obtaining proper insurance licensing through the Industry Specialized Program and independent study, successfully developing and deploying sales and marketing strategies along with periodic communications to optimize USI's position in the marketplace, positively and proactively representing USI in meetings, seminars, trade shows and networking events, and working collaboratively with the account management team and national/regional resources to maximize results. Knowledge, skills, and abilities include 3-5 years of experience in related business to business sales experience, including calling on senior executives and a track record of financial success, current sales success within one of the following industries: Construction, Commercial Real Estate, Healthcare or Industrial, being a personable, highly motivated, goal-oriented, and organized individual that is driven to achieve individual sales goals, superior written and verbal communication and presentation skills, excellent organization and follow-up skills, excellent listening skills with a strong customer focus, good teamwork skills with an ability to work with minimum supervision, understanding and committing to mutual objectives of the Select Commercial Insurance Practice and Regional Office, ability to work with senior level-management and have a top-level executive presence, and a college degree preferred. Why USI? With approximately $3 billion in revenue and over 10,500 associates across approximately 200 offices nationwide, USI is one of the largest insurance brokerage and consulting firms in the world. At USI, we have created one of the most dynamic personal and professional development cultures in the industry. We invest heavily in our associates, and we take pride in celebrating their growth and success through our one-of-a-kind employee reward and recognition programs. Unrivaled Resources and Support What truly distinguishes USI as a premier insurance brokerage and consulting firm is the USI ONE Advantage, a game-changing value proposition that delivers to clients a robust set of risk management and benefit solutions with bottom-line financial impact. USI ONE represents Omni, Network, Enterprisethe three key elements that set USI apart from the competition. Through USI ONE, we develop strategic, timely, and effective risk management and benefit programs in terms that are easy to understand, and we demonstrate how the solutions can have a positive economic impact. Pathways to Promotion USI sales associates are equipped with an industry-leading sales training program called USI ONE Academy, focusing on the understanding, messaging, and articulation of USI's technical solutions. Our Executive Series program features industry articles, videos, and tools to promote meaningful conversations with prospects and clients, and our internal networking and mentoring programs help establish a strong foundation of professional development. These tools and resources set you up for success, and the average promotion timeline from small business sales to middle market is 12-36 months. Premier Sales Rewards, Industry-Leading Programs, and Recognition In addition to competitive pay and commission, incentives, and benefits, USI recognizes our top sales associates through USI PEAK, recognizing and rewarding our sales professionals for achieving superior results. USI offers employee programs that recognize outstanding achievement and help our associates lead healthy, productive lives. We turn care into action with our award-winning wellness program, college scholarships for associates' children, and financial help in times of need. Deep Community Engagement We are committed to giving back to our local communities and supporting a culture of environmental sustainability. From sharing our time, talent, and resources to support local non-profit organizations, animal shelters, and environmental beautification and restoration projects to partnering with eco-conscious vendors and taking steps to reduce our own environmental footprint we're working together as ONE to build a better future. Committed to a Diverse and Inclusive Workplace Our award-winning I'm With U diversity and inclusion program educates our associates to help them better understand and serve our clients, prospects, fellow team members, and local communities through curated education and training resources, employee support programs, and community outreach initiatives to build a more diverse, equitable, and inclusive culture. Nationally Recognized as a Top Insurance Employer Recognized as one of Insurance Business America's Top Insurance Employers eight consecutive years (2018-2025), Named to Business Insurance's annual list of the Best Places to Work in Insurance six years in a row (2020-2025), Named to Fortune's Best Workplaces in Financial Services & Insurance list for the last two years (2024-2025), Certified as a Great Place To Work two years in a row (2024-2025). USI is committed to providing a full-suite of competitive benefits for our growing population and its diverse needs. We offer a wide range of health, welfare and financial benefits including medical, wellness, dental and vision, 401(k), flexible spending and health savings accounts, short and long-term disability, life insurance and other unique employer-sponsored and voluntary programs. USI also offers a generous paid family leave benefit as well as paid holiday time. Salary Range: $75,000 - $90,000

At Pentair, you will work alongside passionate problem-solvers who are committed to the future of our planet. We put our mission into practice, helping the world sustainably move, improve, and enjoy water, life's most essential resource. From our residential water filtration to industrial water management to pool products and more, our 9,000 global employees serve customers in more than 150 countries, working to help create a better world for people and the planet through smart, sustainable water solutions. We have an opportunity for a Regional Sales Leader to join our Roselle, IL team. You will be handling key RainSoft accounts in the Eastern US territory, along with developing new locations and onboarding new dealers. This job posting is for one regional sales leader position. You can live anywhere in the North Atlantic region with the ability to travel a minimum of 26 weeks per year. This region includes NC, VA, WV, MD, PA, NJ, DE, NY, VT, CT, ME, MA, NH, & RI. When you are not traveling for work, you will work from home. You will: • Acquire new Rainsoft dealers and assist with start-up of new dealers and distributors' locations throughout the North Atlantic region (include the states here NC, VA, WV, MD, PA, NJ, DE, NY, VT, CT, ME, MA, NH, & RI) with the objective of growing existing distributors and adding new key accounts., • Be a key partner in establishing dealer and distributor success within the region supporting their ongoing business model and consulting to develop and grow revenue for the region overall., • Train internal and external partners (dealers, etc.) on how to demonstrate product features and benefits utilizing a prepared, professional iPad presentation., • Do in-field training with outside sales representatives by performing in-home sales presentations and observing others., • Work closely with Home Depot Store Managers and personnel to build a strategy/plan for acquiring new customers and facilitate ongoing product knowledge sessions., • Work cross functionally with RainSoft regional training support, marketing, and product management personnel., • Conduct and orchestrate regional sales meetings/team calls/conventions for our customers in partnership with internal marketing support teams., • Be responsible for weekly/monthly/quarterly forecasting. Travel: • Travel a minimum of 26 weeks per year to distributor's locations for on-site consulting, recruiting, hiring, and training inside and outside sales representatives. Key Qualifications: • Have a minimum of 5 years of experience in either direct home sales and/or residential water treatment sales/sales management with heavy emphasis on recruiting, hiring, training, and management of outside sales representatives., • A strong, documented background in sales/sales management, specialized leadership, and sales training., • Have earned a bachelor's degree (B.A., B.S.) is preferred., • Understand lead generation for direct sales model and have demonstrated experience doing so., • Understand company P&L's., • Water Treatment Business Management experience would be preferred., • Great people skills and business development experience., • Experience facilitating sales seminar/awards presentations/sales conventions., • Proficient in Excel, Word, and PowerPoint. Compensation: For this full-time position working at this location, the anticipated TTC range will be from $118400 - $219900 / year. At Pentair, it is not typical for an individual to be hired near the bottom or top of the pay range. Pentair considers various factors in determining actual compensation for this position at the expected location. Actual compensation will be commensurate with demonstrable level of experience and training, pertinent education including licensure and certifications, work location, and other relevant business or organizational needs. This position may be eligible for other forms of compensation such as, annual incentive bonus, sales incentives, and/or long-term incentives. Benefits: As a Pentair employee, you would enjoy a wide array of benefit options to help keep you and your family healthy and protected, health benefits, a generous 401(k), employee stock purchase program, disability benefits, life insurance, critical illness insurance, accident insurance, parental leave, caregiver leave, tuition reimbursement, plus paid time off and wellness programs to encourage a healthy work/life balance. Pentair is an Equal Opportunity Employer. With our expanding global presence, cross-cultural insight and competence are essential for our ongoing success. We believe that a diverse workforce contributes different perspectives and creative ideas that enable us to continue to improve every day.

Regional Business Leader | Multi-Unit Leadership | $100K-$110K $100,000-$110,000 Annual Compensation Lead a $30M business. Shape regional strategy. Develop exceptional leaders. Drive long-term growth. Are you an executive-minded leader who enjoys building businesses, developing people, and delivering measurable financial results? Auto-Chlor System is seeking an experienced Regional Business Leader to oversee a $30M multi-branch region across New York City, Queens, the Bronx, and Connecticut. This is an opportunity to lead one of our largest regions while partnering directly with executive leadership to shape business strategy, strengthen leadership teams, and drive sustainable growth. This role goes beyond managing daily operations. You'll be responsible for building a high-performing organization by developing Branch Managers, improving financial performance, identifying growth opportunities, and creating a culture of accountability and continuous improvement. We're looking for a leader who thinks like a business owner, leads from the front, and enjoys spending time in the field supporting teams, customers, and branch performance. If you've successfully led multiple business units, owned P&Ls, developed exceptional leaders, and consistently delivered business results, we'd love to speak with you. Why Join Auto-Chlor? • Lead a $30M+ multi-branch business, • Partner directly with executive leadership, • Own regional financial performance and long-term growth, • Competitive compensation of $100,000-$110,000, • Company vehicle, technology, and travel support, • Opportunity to shape the future of one of Auto-Chlor's largest regions, • Join a stable, growing company committed to developing leaders from within What You'll Do • Provide strategic leadership across multiple branch locations, • Own regional financial performance, profitability, and long-term business growth, • Develop Branch Managers, Supervisors, and future leadership talent, • Drive accountability through P&L management, operational KPIs, and business planning, • Identify opportunities to improve market share, customer retention, and branch performance, • Partner with executive leadership to execute regional growth initiatives, • Recruit, hire, and develop high-performing leadership teams, • Travel throughout the region to support branches, develop leaders, and strengthen customer relationships Ideal Background • Experience leading multiple business units or branch locations, • P&L ownership with responsibility for financial performance, • Experience developing Branch Managers and leadership teams, • Strong strategic thinking and business acumen, • Sales leadership and customer growth experience, • Experience in service, distribution, logistics, staffing, facilities, uniforms, foodservice, industrial services, equipment rental, or a related industry, • Willingness to travel throughout the New York Metro region Ready to Lead a Business, Not Just Manage One? Apply Today. If you're an experienced executive leader who enjoys building teams, growing businesses, and making a lasting impact, we'd love to hear from you. Apply today and help lead one of Auto-Chlor's largest and most successful regions. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Account representatives don't pass up this opportunity for a great new job that combines client management with a consultative sales process for a global industrial distribution company.Partnering with 4,000 world-class manufacturers, we are an industry-leading value-added distributor of a wide var

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview We are seeking a results-driven Regional Sales Associate to support and grow our sales presence within the Tennessee, Mississippi, and Alabama area. This individual will implement sales strategies, build dealer and contractor relationships, and represent MAX at job sites, events, and trade shows. This is a field-based role requiring regular travel, strong communication skills, and a proactive approach to territory development. Key Responsibilities Sales & Business Development • Visit jobsites to demonstrate MAX products directly to contractors with distributor involvement., • Seek out new distributor partners as needed within the territory., • Implement MAX sales programs and promotions including RBU program., • Attend and support trade shows, industry events, and distributor open houses., • Cover other territories on an as-needed basis. Account Management • Maintain strong relationships with current dealers:, • Train inside and outside sales staff on MAX products and features., • Merchandise retail locations using signage, point-of-purchase displays, stickers, and posters., • Identify key sales personnel to target for training and promotional efforts., • Conduct jobsite visits alongside customers to reinforce product value., • Ensure timely follow-up to customer requests., • Make bi-weekly calls to each key account., • Partner with Office Manager to assist with collections on past due accounts. Reporting & CRM Usage • Use CRM tools (Salesforce.com preferred) daily to:, • Track interactions with customers and distributors., • Monitor sales pipeline and bonus eligibility., • Submit timely reports:, • Expense reports, • Dealer visit summaries, • Trade show reports, • Confirmation and thank-you letters to customers Product Support & Collaboration • Coordinate with engineering teams to test products in the field., • Provide feedback from jobsites and distributors to support product development., • Contribute to the design and implementation of promotions and marketing initiatives., • Complete special projects as assigned by management. Qualifications Education • Bachelor’s degree in Business or a related field, or equivalent combination of education and work experience. Experience • Proven experience in outside sales, ideally with a manufacturer or industrial equipment company., • Experience in developing pricing strategies, executing sales promotions, and training customers and staff., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint) required., • Familiarity with Salesforce.com or comparable CRM platforms preferred. Physical & Travel Requirements • Frequent travel within the assigned territory., • Ability to lift and carry tools and equipment to and from jobsites or trade shows., • Physical ability to set up and dismantle displays at events and open houses., • Overnight travel as required. Salary: 70k - 95k commensurate with experience and qualifications

Job Description Bemana is seeking an experienced Generator Technician in Plainview, NY to join a leading independent provider of commercial generator maintenance, repair, and sales. Established in 1990, our client has the Northeast's largest team of EGSA-certified technicians and a growing nationwide presence. Our client is seeking a skilled Generator Technician 3 with advanced experience diagnosing, repairing, and maintaining diesel, natural gas, and propane generators, as well as automatic transfer switches (ATS) and control systems. Position Offers: • $40-$55/hr depending on experience (If your target pay is higher, we still encourage you to apply—we could request adjustments based on experience and market conditions), • Paid weekly, • Company take-home truck and fuel card, • Paid door-to-door travel time, • Specialty tools and arc flash PPE provided, • Medical, dental, and vision insurance (effective after the first 60 days per Union), • 3% 401(k) company match, • Union pension, • 2 weeks of prorated PTO to start (11 paid federal holidays, 2 floating holidays, and 5 paid sick days), • Commission on technician-generated repair work (not available in Phoenix, AZ; Fremont, CA; and Orange, CA), • Relocation assistance Key Responsibilities: • Diagnose, repair, and maintain commercial and industrial generator systems up to 4MW, • Troubleshoot electrical, engine, and control system issues., • Perform load bank testing, ATS testing, and system performance checks., • Read and interpret schematics, wiring diagrams, and technical manuals., • Lead emergency service calls and support complex field repairs., • Complete accurate service documentation and parts reporting., • Mentor Generator Technicians I & II., • Coordinate with customers, project managers, dispatch, and vendors to complete jobs efficiently., • Follow safety standards and participate in a rotating on-call schedule. Qualifications: • High school diploma or GED required; technical training preferred., • 5+ years of generator service and repair experience., • Experience with major generator manufacturers (Cummins, Kohler, Generac, CAT, MTU, ASCO)., • Proficient with diagnostic software, multimeters, and load banks., • Knowledge of NFPA 110, NFPA 70E, and OSHA standards. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview We are seeking a results-driven Regional Sales Associate to support and grow our sales presence within the Northern California and Northern Nevada territory. This individual will implement sales strategies, build dealer and contractor relationships, and represent MAX at job sites, events, and trade shows. This is a field-based role requiring regular travel, strong communication skills, and a proactive approach to territory development. Key Responsibilities Sales & Business Development Visit jobsites to demonstrate MAX products directly to contractors with distributor involvement. Seek out new distributor partners as needed within the territory. Implement MAX sales programs and promotions including RBU program. Attend and support trade shows, industry events, and distributor open houses. Cover other territories on an as-needed basis. Account Management Maintain strong relationships with current dealers: Train inside and outside sales staff on MAX products and features. Merchandise retail locations using signage, point-of-purchase displays, stickers, and posters. Identify key sales personnel to target for training and promotional efforts. Conduct jobsite visits alongside customers to reinforce product value. Ensure timely follow-up to customer requests. Make bi-weekly calls to each key account. Partner with Office Manager to assist with collections on past due accounts. Reporting & CRM Usage Use CRM tools (Salesforce.com preferred) daily to: Track interactions with customers and distributors. Monitor sales pipeline and bonus eligibility. Submit timely reports: Expense reports Dealer visit summaries Trade show reports Confirmation and thank-you letters to customers Product Support & Collaboration Coordinate with engineering teams to test products in the field. Provide feedback from jobsites and distributors to support product development. Contribute to the design and implementation of promotions and marketing initiatives. Complete special projects as assigned by management. Qualifications Education Bachelor’s degree in Business or a related field, or equivalent combination of education and work experience. Experience Proven experience in outside sales, ideally with a manufacturer or industrial equipment company. Experience in developing pricing strategies, executing sales promotions, and training customers and staff. Proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint) required. Familiarity with Salesforce.com or comparable CRM platforms preferred. Physical & Travel Requirements Frequent travel within the assigned territory. Ability to lift and carry tools and equipment to and from jobsites or trade shows. Physical ability to set up and dismantle displays at events and open houses. Overnight travel as required.

Job Description We are seeking an EXPERIENCED electrical project manager to join our team! You will oversee project planning, scheduling, budgeting, and implementation. Responsibilities: • Oversee all aspects of construction project from planning to implementation, • Allocate resources for assigned projects, • Supervise onsite personnel and subcontractors, • Interface with project inspectors, contractors, architects, engineers, city and county officials, and clients, • Negotiate with contractors to receive reasonable order costs, • Maintain high standards of workmanship that adhere to original plans and specifications Qualifications: • Previous experience in electrical OR construction management/ Project Management (Minimum 5 years requested), • Familiarity with construction management software, • Strong leadership qualities, • Deadline and detail-oriented, • Good with technology/client communications\nCompany Description National is a full-service electrical contracting company based in Long Island, New York, serving commercial, industrial, and residential clients across Long Island. Founded in the mid-1980s, the company has built a reputation for delivering reliable, code-compliant solutions, ranging from large-scale commercial installations and healthcare facilities to service work and emergency power systems. National is a full-service electrical contracting company based in Long Island, New York, serving commercial, industrial, and residential clients across Long Island. Founded in the mid-1980s, the company has built a reputation for delivering reliable, code-compliant solutions, ranging from large-scale commercial installations and healthcare facilities to service work and emergency power systems.

Job Description Lead Construction Operations with Purpose and Precision – Join All Boro Inc. as an General Construction Operations Manager! Position Title: General Construction Operations Manager Company Name: All Boro Inc. Pay Range: $75,000 – $125,000 per year + performance bonuses Employment Type: Full-Time Location: Amityville, NY Industry: General Construction (Commercial, Industrial, Government or Federal) Job Overview All Boro Inc., a trusted name in restoration, remediation, and construction services for over 25 years, is hiring a driven and experienced Operations Manager to lead day-to-day field and warehouse operations. Based in Amityville, NY, this role balances leadership in office strategy and hands-on field oversight across projects in the Five Boroughs and Long Island. You’ll oversee a $15 million operation, manage project teams and subcontractors, and play a critical role in driving results and maintaining operational excellence. This is a unique opportunity for a dedicated leader to join a family-oriented company with a strong reputation and room to grow. Who We Are All Boro Inc. is a full-service construction, restoration, and maintenance company serving commercial, residential, and nonprofit clients across New York City and Long Island. We are proud of our long-standing reputation, family-oriented culture, and ability to deliver integrated services that improve lives and communities. At All Boro, we’re serious about our work—and about investing in the people who help us deliver it. We offer job stability, paid training, strong benefits, and career advancement opportunities in a supportive and fast-paced environment. Key Responsibilities • Lead and manage field operations including 2 project managers, 12 in-house technicians, 6 trucks, and subcontractors., • Supervise daily warehouse functions and coordinate routing, scheduling, and workforce needs., • Conduct site visits to ensure safety compliance, quality control, and performance expectations., • Communicate daily with project managers and subcontractors to align on job execution., • Handle escalated customer complaints and implement effective solutions., • Participate in weekly P&L reviews and help drive financial performance within labor and material budgets., • Collaborate with the executive team to define and execute short- and long-term operational goals., • Oversee hiring, training, and discipline of field staff, promoting accountability and growth., • Maintain detailed records and ensure accurate reporting across all operational areas., • Perform additional duties as assigned to support company objectives.Qualifications, • 5+ years of leadership experience in construction and/or restoration industries., • Strong problem-solving, planning, and prioritization skills., • Budget management experience and ability to interpret P&L statements., • Proficient in Microsoft Office (Excel, Word, Outlook); knowledge of Xactimate and Luxor CRM is a plus., • Ability to multitask and make real-time decisions in a fast-paced environment., • Strong interpersonal communication and team management skills., • Comfortable lifting up to 75 lbs and being on your feet when needed.Benefits, • Medical, dental, and vision insurance, • Retirement savings plan (401k), • Paid time off for holidays, vacation, and sick days, • Weekly pay cycle, • Tech package (smartphone or tablet), • Referral bonus program, • Company outings and annual trips, • Mileage reimbursement, • Prevailing wage projects, • Charity alignment opportunities, • Paid training, certifications, and career development supportSchedule, • Full-Time, Monday to Friday, • 70% office-based / 30% field-based (Amityville, NY and job sites throughout NYC & Long Island), • Flexible hours as needed to support field operationsLocation, • Hybrid Role – Based out of Amityville, NY with fieldwork across the Five Boroughs and Long Island. Some local travel required.Equal Employment Opportunity (EEO) Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. #MGX25

Job Description Overview: Schacker Real Estate Corp is seeking self-motivated, outgoing individuals with strong people and problem solving skills to join their Melville-based commercial real estate brokerage firm as commission-based real estate salespeople and associate brokers. Responsibilities: Actively prospect for new clients through in-person outreach in industrial parks, cold-calling, and networking to identify businesses looking to buy, sell, or lease industrial properties. Identify suitable on-market and off-market properties and secure tours with well-qualified, motivated buyers and tenants. Elicit oral and prepare written purchase offers and lease proposals, and negotiate the business terms to form the foundation for sale contracts and leases. Review leases and contracts to ensure the agreed-upon business terms are accurately reflected. Collaborate with industry professionals— such as attorneys, lenders, engineers, and contractors—to ensure smooth and successful transactions for your clients. Qualifications: Outstanding communication skills Have - or are willing and eager to develop - deep expertise in industrial real estate as well as construction, legal, and tax considerations that impact transactions. Exceptional time management and organization so you can continuously acquire and manage multiple listings and numerous customers seeking space A tenacious and results-driven mindset—able to prospect, build relationships, and guide clients through the transaction process with confidence Sales experience is preferred Fluency in a foreign language, especially Mandarin or Spanish, is a plus. A New York State Real Estate Salesperson or Associate Broker License is required prior to joining Schacker Realty. Why Schacker Realty? At Schacker Realty, your success is our mission. We provide the tools, training, and support to help you excel in commercial real estate—whether you’re launching your career or looking to take it to the next level. ✅ For New & Aspiring Agents: Gain hands-on training from NYS Licensed Real Estate Instructors, access state-of-the-art systems, and learn from some of the best in the industry. Our structured support and collaborative environment help set you up for early success. ✅ For Experienced Brokers: Maximize your productivity with our cutting-edge technology, superior market data, in-house marketing and research teams, and a platform designed to help you grow your business. ✅ Entrepreneurial Culture in an Ideal Location: We’re an innovative firm that values new ideas and empowers our team to succeed. Our Class A office offers top-tier amenities and the ideal location for serving both Nassau and Suffolk counties. At Schacker, we foster a friendly, supportive, and diverse workplace where your potential is limitless. Are you ready to grow with us? Please send your resume to careers@schackerrealty.com. Thank you. \nCompany Description Since 1962, companies and property owners have turned to Schacker Realty to fulfill their Long Island industrial and commercial real estate needs. Schacker’s expertise is in the industrial, office and retail sectors of the market. Our objective is to earn our clients' trust and respect by exceeding their expectations, and in doing so, build a long term mutually beneficial relationship. Over the past six decades, Schacker has completed more than 100 million square feet of commercial property transactions, representing a diverse client base of buyers, sellers, landlords and tenants. This extensive client base includes many Fortune 500 corporations and countless family-owned businesses that form the backbone of Long Island’s economy. We have built our reputation by handling our loyal clients’ businesses the same way we would the businesses of our own friends and family. Schacker has superior technological capabilities to better serve our clients by saving them time and providing more complete and faster access to information and the contacts they require to make decisions and transact business. We constantly innovate our systems and databases to transform and enhance the way our agents and clients evaluate and complete real estate transactions. Since 1962, companies and property owners have turned to Schacker Realty to fulfill their Long Island industrial and commercial real estate needs. Schacker’s expertise is in the industrial, office and retail sectors of the market. Our objective is to earn our clients' trust and respect by exceeding their expectations, and in doing so, build a long term mutually beneficial relationship.\r\n\r\nOver the past six decades, Schacker has completed more than 100 million square feet of commercial property transactions, representing a diverse client base of buyers, sellers, landlords and tenants. This extensive client base includes many Fortune 500 corporations and countless family-owned businesses that form the backbone of Long Island’s economy. We have built our reputation by handling our loyal clients’ businesses the same way we would the businesses of our own friends and family.\r\n\r\nSchacker has superior technological capabilities to better serve our clients by saving them time and providing more complete and faster access to information and the contacts they require to make decisions and transact business. We constantly innovate our systems and databases to transform and enhance the way our agents and clients evaluate and complete real estate transactions.

Job DescriptionTemporary Building & General Construction Technician Location: Hicksville, NY Schedule: Friday 12:00 PM to 9:30 PM; Saturday & Sunday 9:00 AM to 7:00 PM (3 days/week). Hours may increase based on business needs. Pay Rate: $30.00/hour Position Summary The Temporary Building & General Construction Technician performs construction, repair, and facility maintenance work to support safe, efficient, and compliant operations. This role helps maintain building infrastructure, complete GMP/CAPA action items, and support facility improvement projects. Key Responsibilities • Perform general construction tasks including carpentry, drywall, flooring, painting, and minor repairs., • Conduct routine building maintenance and corrective repairs., • Install, repair, and maintain doors, walls, ceilings, fixtures, and other building components., • Support renovation and facility improvement projects., • Read and interpret basic drawings and specifications., • Troubleshoot facility issues and implement timely solutions., • Ensure compliance with OSHA, GMP, and company safety standards., • Coordinate work with Maintenance, Engineering, and contractors., • Maintain tools, equipment, and work areas in a safe and organized manner., • Complete work orders and required documentation., • Perform other duties as assigned. Qualifications • Must be 18 years or older., • 2-5 years of experience in construction, facilities maintenance, or a related field., • Ability to communicate in English; bilingual English/Spanish preferred., • Basic knowledge of carpentry, plumbing, electrical systems, and building maintenance., • Ability to safely operate hand and power tools., • Strong understanding of workplace safety practices., • Technical or trade certification preferred. Skills • Problem-solving and troubleshooting, • Attention to detail and quality workmanship, • Time management and organization, • Ability to manage multiple priorities, • Strong teamwork and safety awareness Work Environment • Industrial/manufacturing facility setting., • Requires lifting, climbing, bending, and prolonged standing., • May involve exposure to varying temperatures, noise, and confined spaces., • Overtime or emergency work may be required. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.