Industrial management jobs in Vineland, New JerseyCreate job alerts

Job DescriptionJob Title: Maintenance Mechanic Location: Vineland, New Jersey Job DescriptionObjective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives.Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job Description ALL MAINTENANCE PERSONNEL WILL WORK TOGETHER TO ENSURE A SAFE OPERATION; QUALITY OF SERVICES RENDERED, AND THAT THE OPERATION OF THE MAINTENANCE DEPARTMENT MEETS OR EXCEEDS STANDARDS. RESPONSIBILITIES: The Maintenance Mechanic responsibilities focus on basic skills as well as the knowledge and concepts needed to maintain plant electrical, electro-mechanical, and electronic equipment. General responsibilities include but are not limited to performing preventative and corrective maintenance functions required for plant electrical equipment. All individuals assigned to the department are to work together in a safe, efficient and effective manner to insure the production of a quality product. To achieve this level of operations all employees are required to comply with all applicable Plant and OSHA safety rules as well as the National Electric Code. NORMAL DUTIES: (include the following) • To perform maintenance as needed on various machines, equipment, or systems to enhance the manufacturing operation., • Maintain information for, or input into, the computer system in a timely manner., • Make adjustment needed to ensure product being produced meets all quality standards. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform the normal duties of this job as well as all lower classifications. The requirements listed below are representative of the knowledge, skill, and/or ability required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Minimum of two years of demonstrated work experience preferably in manufacturing setting., • Demonstrate Mechanical Aptitude., • Demonstrate Industrial Electrical technology., • Understand and demonstrate basic fabrication and welding., • Understand & demonstrate basic Industrial Electricity+, • Be proficient in reading electrical schematics. EDUCATION and/or EXPERIENCE: Two to three years related experience and/or training; or equivalent combination of education and experience. Candidates will demonstrate their level of experience. • Must demonstrate a thorough understanding of the operation of all plant equipment., • Must be able to complete all jobs assigned in a safe and efficient manner with minimal supervision. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: Able to use computers in troubleshooting, completing work orders and other related job duties. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move in excess of fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts, electrical components and steam. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies stretch throughout Pennsylvania, Delaware, Maryland, & New Jersey. Visit us at to learn more about our company. We strive to provide an environment for our associates and customers that is welcoming, transparent, and forward thinking. Our employees are our greatest asset. We promote and develop individual strengths, as well as grow our employees personally and professionally. Together we can make a difference. Benefits: We offer a generous benefit package including: • Vacation and PTO time, • Paid Holidays, • 401k with profit sharing, • Medical, Dental and Vision insurance., • Employee Assistant Program, • FSA and HSA Plans, • Life Insurance, • Opportunities for Advancement, • Paid Training, • Employee Referral Program, • Employee Discount Pay: $18.00 - $38.00 per hour based on experience Shift: Full Time Summary: Repairs and maintains diesel and gasoline engine industrial trucks according to dealership and factory specifications. Essential Duties: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Communicates with parts department to obtain needed parts., • Saves and tags parts of the job if under warranty or if requested by the customer., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Communicates with service advisor/dispatcher immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time., • Documents all work performed and recommended on the repair order., • Road tests vehicles when required., • Participates in manufacturer-sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Supervises work of any apprentice technicians as assigned., • Reports machinery defects or malfunctions to supervisor., • Ensures that vehicle is kept clean. Notifies service advisor/dispatcher immediately of anything that has happened to change the appearance or condition of the vehicle., • Keeps shop area neat and clean., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of and complies with federal, state and local regulations, such as hazardous waste disposal, OSHA Right-to-Know etc., • Operates all tools and equipment in a safe manner., • Reports any safety issues immediately to management., • Must have valid Driver's License

Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies stretch throughout Pennsylvania, Delaware, Maryland, & New Jersey. Visit us at to learn more about our company. We strive to provide an environment for our associates and customers that is welcoming, transparent, and forward thinking. Our employees are our greatest asset. We promote and develop individual strengths, as well as grow our employees personally and professionally. Together we can make a difference. Benefits: We offer a generous benefit package including: • Vacation and PTO time, • Paid Holidays, • 401k with profit sharing, • Medical, Dental and Vision insurance., • Employee Assistant Program, • FSA and HSA Plans, • Life Insurance, • Opportunities for Advancement, • Paid Training, • Employee Referral Program, • Employee Discount Pay: $18.00 - $38.00 per hour based on experience Shift: Monday-Friday, 9:30am-6:00pm. Summary: Repairs and maintains diesel and gasoline engine industrial trucks according to dealership and factory specifications. Essential Duties: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Communicates with parts department to obtain needed parts., • Saves and tags parts of the job if under warranty or if requested by the customer., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Communicates with service advisor/dispatcher immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time., • Documents all work performed and recommended on the repair order., • Road tests vehicles when required., • Participates in manufacturer-sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Supervises work of any apprentice technicians as assigned., • Reports machinery defects or malfunctions to supervisor., • Ensures that vehicle is kept clean. Notifies service advisor/dispatcher immediately of anything that has happened to change the appearance or condition of the vehicle., • Keeps shop area neat and clean., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of and complies with federal, state and local regulations, such as hazardous waste disposal, OSHA Right-to-Know etc., • Operates all tools and equipment in a safe manner., • Reports any safety issues immediately to management., • Must have valid Driver's License

Job Description Position Title: Plant Operating Engineer Reports To: The Operating Engineer is responsible for overseeing the refrigeration system, supporting plant utilities, and performing preventive maintenance and repairs under the guidance of the Chief Engineer and management. Primary Responsibilities Quality & Food Safety: • Ensure all assigned tasks align with product quality and food safety standards, • Conduct routine documented checks on the refrigeration system, • Perform preventative maintenance as directed by the Plant Energy Manager, Chief Engineer, or Team Leader, • Execute corrective actions on the refrigeration system as needed, • Diagnose and troubleshoot equipment issues, determine root causes, and implement necessary repairs, • Install, maintain, and repair mechanical, electrical, electronic, hydraulic, and pneumatic equipment, • Utilize maintenance shop tools to fabricate parts, structures, or equipment, • Assist in the training and development of new team members, • Collaborate with the Plant Energy team to enhance department operations Job Requirements Interpersonal Skills: • Strong verbal and written communication skills, • Ability to clearly convey concepts and ideas, • Familiarity with GMPs (Good Manufacturing Practices), • Knowledge of HACCP, FDA, DEP, EPA, TCPA, OSHA, and other relevant regulations, • Competent in troubleshooting and performing root-cause analyses, • Strong decision-making skills, personal initiative, and organizational abilities, • Willingness to work overtime and provide shift coverage as needed, • High school diploma or GED required, • Must understand, speak, and write English fluently, • Minimum 2 years in industrial manufacturing, with 1 year in the food industry preferred, • Location: Vineland, NJ, • Training: Initial training on the day shift (Monday–Friday, 8-hour shifts)., • Shift Schedule Post-Training:, • 12-hour shifts (7 PM to 7 AM), rotating 2 days on, 2 days off, including weekends., • Compensation & Benefits:, • Union position with union-provided benefits., • Fixed starting rate: $32.85 per hour.

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications, as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value-added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and inside/telephone sales selling efforts. DWK supports four primary market segments: Life Science Research, Life Science Production & Packaging, Industrial & Applied Science, and Clinical – Healthcare. POSITION SUMMARY: Must have technical aptitude to set up, operate and maintain technical metal pressing machinery in a safe and efficient manner with the objective of manufacturing products consistent with required specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Must have technical skills in a machine paced environment to operate production equipment in a safe and competent manner to produce products within desired specifications, • Have mechanical knowledge in order to complete equipment set-up's in accordance with customer specifications and quality procedures, • Mechanical aptitude and experience must surround production machinery and employee must be capable of understanding mechanical and electrical equipment, not just one type of mechanical work, • Employee must be willing to apply existing experience and develop new experience to grow in role, • Must possess a working knowledge of stamping thin gauge metals, preferably aluminum or be able to demonstrate mechanical aptitude such that knowledge can be gained through experience, • Employee must be able to manufacture technical products in accordance with established specification and be able to take written and/or verbal instruction and direction, • One must be able to follow a documented schedule of required and sequenced production, • Employee will need to be able to record key information in basic formats such as quantities of materials used for each job, details about machine performance, output data, and so on., • Job will require that employee be capable of inspecting their manufactured parts and components and document the findings on appropriate paperwork as needed, • Will need to notify/inform management of product discrepancies, equipment malfunctions, production anomalies, and/or personal injuries, • Need to be an open and transparent communicator to optimize the performance of the department, division, and company, • Must adhere to established policies and procedures, • Compliance to safe working performance is mandatory and without exception, using all designated personal protective equipment (PPE), • Work areas are to be maintained in a clean and orderly manner with proper use and storage of tools, • Be open to training and development as deemed needed by management, • Work in a collaborative environment and be a positive contributor to company success, morale, and culture, • High School Diploma or Equivalent, • Light gage stamping experience, • Experience with production processes and machinery, • Good written and verbal communications skills, • Ability to read a blueprint a plus, • Be able to read basic instructions, • Be able to document key information and data, • Have technical aptitude and a desire to grow Work may take place in an office, warehouse or manufacturing environment. Must have the ability to sit, stand or walk for extended periods of time. Specific vision abilities required by this job include close vision and ability to adjust focus. Lift up to 40 pounds. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. Travel domestic and/or international occasionally. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value-added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and Inside sales selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. POSITION SUMMARY: A Process Technician is responsible for evaluating and creating new process procedures for the rubber department. This position takes direction from the rubber manager to coordinate with production /sampling needs. The Process Technician develops the design of new products and helps to cost the jobs according to manufacturing processes and tooling required. The Process Technician ensures all processes are documented. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Responsible for all aspects of the compression molding process, including, but not limited to, set-up and tear-down, troubleshooting, equipment maintenance, and workflow., • Work with production personnel to ensure molded components meet requirements; adjusting as required., • Provide molded components promptly to ensure production schedules are met., • Generate documentation on molding runs that can be used to control traceability and ensure reproducibility., • Troubleshoot electrical/mechanical systems and connections between Tool/Die and the machines., • Analyze, install, test, and review machine settings to increase operating efficiency., • Complete required paperwork routing/setup sheet, • Confer with Supervisor, area leaders, or others to resolve molding and trimming issues ., • Optimize material utilization through process and improve scrap reduction., • Identify employee training needs and communicate to Operations Manager., • Maintain good housekeeping and EHS requirements., • Minimum of 5 years’ experience in compression molding or similar, • High school diploma or equivalent, • Excellent organizational skills., • Experience with Process Control Documentation, • Ability to develop process sheets and set parameters for current and new products., • Must have good oral and written communication., • Ability to lift 50 lbs., • Able to stand for long periods of time. Must have the ability to sit, stand or walk for extended periods of time. Specific vision abilities required by this job include close vision and ability to adjust focus. Lift up to 50 pounds. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. Domestic / International travel occasionally. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was formed through the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware. Serving scientific research, technical applications, storage, and packaging needs, DWK manufactures a wide array of precision glassware and specialty products for the life sciences market. DWK also offers products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value-added services) to customers seeking packaging solutions. Revenue streams are driven by three primary channels: Global distributors, National distributors, and Direct field selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. POSITION SUMMARY: The Forklift Operator 1 position is responsible to accurately, and safely follow directions to perform duties in Receiving, Shipping, and Warehouse Storage. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Accurately identifies and receives product into inventory locations, • Accurately identifies product to be picked from a pick list, • Accurately picks, packs, palletize, wraps and tags orders, • Accurately returns product to proper inventory locations, • Moves and stacks ware for the purpose of conducting physical inventory, • Assists in physical inventory and cycle counting as directed, • Performs cleaning and maintenance duties as directed, • Loads or unloads trucks or trailers from other facilities or vendors, • Operates all equipment in a safe and professional manner, while completing tasks on a timely basis., • Keeps work area clean and well organized and assists in keeping entire facility in the same condition., • High School Diploma, GED preferred, • Two (2) years’ experience driving various types of forklift equipment in fast-paced, high volume warehouse preferred, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is frequently required to walk, stand, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, bend, talk and hear., • The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications, as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value-added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and inside/telephone sales selling efforts. DWK supports four primary market segments: Life Science Research, Life Science Production & Packaging, Industrial & Applied Science, and Clinical – Healthcare. POSITION SUMMARY: Hands-on responsibility for packing all rubber components, manufacturing, and assembled products; managing a room or area of qualified rubber inspectors. To pack and inspect in accordance with established standards and customer requirements per pack specs. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Lead the room in all inspection of rubber parts to assign jobs/duties as needed., • Perform packing requirements of completed product in accordance with company quality standards and production guidelines utilizing packing specs., • Move finished products between stations to prepare for shipping and visually inspect all good parts as they’re being completed., • Complete all paperwork of finished products for shipment in accordance with company procedures., • Work closely with quality and report problems or discrepancies to management in a timely manner., • Keep all inventory labeled and properly stored., • Notify management of injuries or related occurrences., • Wear personal protective equipment in accordance with safety and training guidelines, • Required to wear proper gowning for specific areas, • Maintain and organized work area and utilize good housekeeping and EHS requirements, • Oral Communication Skills and ability to follow instructions., • Written Communication Skills (English), • Basic Math Skills, • Organization, • Reading Skills, • Time Management Work may take place in an office, warehouse or manufacturing environment. Must have the ability to sit, stand or walk for extended periods of time. Specific vision abilities required by this job include close vision and ability to adjust focus. Lift up to 40 pounds. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. Travel domestic and/or international occasionally. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description G.E. Mechanical, LLC offers you more than just a salary and more of what makes life exciting and interesting. Beyond a competitive base salary with medical, vacation, holiday, and 401(k) benefits package. G.E. Mechanical offers you the opportunity to run your own projects, control the daily decisions that accompany any job and unlimited growth opportunities. Our team is our greatest assets. We want you to be the one who helps take us to the next level. If you're looking for more out of your career, for more out of life, then it's time to break-out of your comfort zone and apply today. G.E. Mechanical LLC is a leading full-service mechanical contractor, headquartered in Vineland, NJ and serving all of Southern New Jersey. Family operated since 1984, G.E. Mechanical has provided a full range of refrigeration, HVAC, plumbing, drain cleaning, and environmental services to commercial and industrial customers. Plumbing Technical Services Lead Position Overview The Plumbing Technical Services Lead's responsibility is to ensure sure the services we are providing meet G.E. Mechanical plumbing quality standards. As a Plumbing Technical Services Lead you will review work completed by plumbers, provide technical guidance, and confirm ticket completeness. This position fills the gap between completed field work and final customer invoicing to ensure quality and accuracy. Responsibilities Review all plumbing service tickets including time, materials, pictures, and equipment to ensure the work performed matches the written description and meets industry/company standards Correspond with technicians to clarify any technical information Report quality issues or concerns to management, work through resolutions when applicable/directed Complete plumbing quotes based on technician recommendations, unit age/condition, industry standards, and customers' long-term goals Extract pull-through work from service calls and preventative maintenance visits Perform quality and cost control of all quoted plumbing projects throughout scope of work to maintain expected standards Develop meaningful relationships with customers to encourage trust and loyalty Communicate with customers regarding quoted work and provide knowledgeable and insightful information to enable customer to make an informed decision Follow up with customers on quoted plumbing work and coordinate with service team if approved Stay current with changing industry standards Work with team members to facilitate calls, manage workflow, and provide a positive customer journey Maintain an organized workspace and properly file documents, updates, and product information so it is readily accessible for reference Work with management to meet company goals and deliverables Minimum Qualifications Education/Experience High School diploma or GED Five (5) years' experience in mechanical service, mechanical field estimating, or related field OR Bachelor's degree in Engineering, Construction Management, or related fields and two (2) years' experience in Project Management and/or estimating, at least two (2) years of experience in a leadership role in mechanical service operations Preferred Qualifications Plumbing or Mechanical Technical Expertise Field estimating experience Ability to multitask in a fast-paced environment Verbal & written communication skills Attention to detail and organization Proficiency in Microsoft Word, Excel, & Outlook * REWARDING YOUR PERFORMANCE * Competitive salary, commensurate with experience Company paid vacation and holidays Company health care, vision, & dental benefits 401k plan with Company match Company paid life insurance Education and training provided with monetary incentives available for education courses completed Eligible for performance and company-based bonuses Salary Range: $80k - $90k G.E. Mechanical, LLC is an Equal Opportunity/Affirmative Action Employer with a strong commitment to the achievement of excellence and diversity among its workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law.

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and Inside sales selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. POSITION SUMMARY: The Machine Operator is responsible for the procurement To operate machinery in a safe and efficient manner and produce product per customer specification. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Operate production equipment to produce products in accordance with production needs., • Complete equipment set-up's in accordance with customer specifications and quality procedures., • Produce assigned products in accordance with verbal and written instructions., • Record length of time and quantity of materials used for each job., • Inspect parts and document findings on appropriate paperwork as needed., • Notify management of product discrepancies, equipment malfunctions and/or personal injuries., • Adhere to established policies and procedures paying special attention to safety regulations., • Maintain work areas in a clean, orderly and safe manner to include returning tools to designated areas., • Wear personal protective equipment in accordance with training guidelines., • Rubber machine operator (molding) position requires heat resist sleeves & gloves, safety glasses, and during set up steel toe tips., • Seals machine operator position requires safety glasses, ear plugs and during set up steel toe tips, • Required to wear proper gowning for specific areas, • Maintain good housekeeping and EHS requirements, • High School diploma, GED or equivalent, • 3-5 years of proven Machine Operator experience, • MS Office Suite, SAP a plus WORK ENVIRONMENT / CONDITIONS / PHYSICAL DEMANDS:

A National General Contractor specializing in commercial projects, from full build outs and renovations to large scale projects is seeking a talented Assistant Project Manager to help assist with new and existing construction.This position is based out of their office in Union County, NJ.Benefits +

Minimum 5 years of mechanical experience, preferably in an industrial manufacturing setting.

Experience in electrical engineering, applications, or project management.

Works closely with in-house Project Management teams to actively manage client budgets and schedules.

Minimum 5 years of mechanical experience, preferably in an industrial manufacturing setting.

A National General Contractor specializing in commercial projects, from full build outs and renovations to large scale projects is seeking a talented Assistant Project Manager to help assist with new and existing construction.This position is based out of their office in Union County, NJ.Benefits +

Experience in electrical engineering, applications, or project management.

Works closely with in-house Project Management teams to actively manage client budgets and schedules.

UPS - JobID: B18C83A74B9D43A3AE69D8F9ED3F550C [Material Handler / Freight Handler] As a Warehouse Worker at UPS, you'll: Be responsible of loading and unloading, packing and unpacking, auditing, and general housekeeping; Be responsible of scanning orders, data entry into computerized inventory contr

LKQ Corporation - [Material Handler / Freight Handler] As a Warehouse Worker at LKQ Corporation, you'll: Load, unload, pick, put away, consolidate, stack and stage products and materials; Follow specific work instructions and best practices to safely and accurately complete daily work assignments; R

PeopleReady - PR-1472997 [Material Handler / Freight Handler] As a Warehouse Worker at PeopleReady, you'll: Assist with loading and unloading trucks; Operate forklifts and other warehouse equipment; Maintain a clean and organized work environment; Pick and pack orders accurately and efficiently; Per

No experience requited, hiring immediately, appy now.Find out what you’ll become as a Package Handler at UPS.In this fast-paced warehouse job, you’ll lift, lower and slide packages up to 70 lbs.You’ll typically work 3 ½ - 4 hour shifts, approximately 17 ½ - 20 hours per week in a part-time o

Job Opportunity at LKQ Corporation.Join the LKQ Family! We're looking for motivated individuals to join our team at LKQ Corporation.With opportunities for growth, competitive benefits, and a supportive work environment, LKQ is the place to be.Apply now and take the first step toward a rewarding care

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

A National General Contractor specializing in commercial projects, from full build outs and renovations to large scale projects is seeking a talented Assistant Project Manager to help assist with new and existing construction.This position is based out of their office in Union County, NJ.Benefits +

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

Experience in electrical engineering, applications, or project management.

Minimum 5 years of mechanical experience, preferably in an industrial manufacturing setting.

Under the direction of the pharmacist, exercises independent judgment to ensure compliance and execution of all business administrative activities and pharmacy inventory management tasks that do not require pharmacist licensure. People & Performance Management. Leads performance management of techni

We are a distributor of residential and commercial HVAC equipment, building/home automation and energy management systems. Location: 2631 Industrial Way Vineland, NJ 08360.

Regal Entertainment Group - JobID: 1d727101-8338-4116-8d61-1d254c98853a [Maintenance Mechanic] As a Maintenance Technician at Regal Entertainment, you'll: Perform minor repairs in all areas of the theatre including projection booth such as change out fixtures in the booth, repair fan motors, etc; En

PrideStaff - 561417 [Maintenance Mechanic] As a Maintenance Tech at PrideStaff, you'll: Install, maintain, rebuild, and repair a wide variety of machinery requiring the use of ordinary and specialized tools and devices; Maintain equipment function, perform preventative maintenance, and support produ

As a Retail Warehouse Associate, you'll help us create great shopping experiences by keeping our sales floor stocked and preparing online orders to be shipped to customers' homes.This includes unloading trucks, replenishing store shelves, tracking inventory levels, and pulling and boxing products fo

Job Opportunity at LKQ Corporation.Join the LKQ Family! We're looking for motivated individuals to join our team at LKQ Corporation.With opportunities for growth, competitive benefits, and a supportive work environment, LKQ is the place to be.Apply now and take the first step toward a rewarding care

Basic computer skills and familiarity with warehouse management systems. Strong organizational and time-management skills.

Communicates all project issues to the appropriate level of management in a timely manner. MEP project management experience. Collaboration with project teams, construction sites, and management is essential to ensure successful project execution.

Basic computer skills and familiarity with warehouse management systems. Strong organizational and time-management skills.

Collaboration with project teams, construction sites, and management is essential to ensure successful project execution. Join our team and be a part of shaping the future of facility management and construction excellence. Communicates all project issues to the appropriate level of management in a

Basic computer skills and familiarity with warehouse management systems. Strong organizational and time-management skills.