Industrial management jobs in Paterson, New JerseyCreate job alerts

Job DescriptionDescription: Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when required Controls, Controls Interface & Automation • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system response Preventive Maintenance & Compliance • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and procedures Customer Service & Communication • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicable Leadership & Mentorship • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluations Administrative & Technology Responsibilities • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements: Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction) Experience • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferred Technical Skills • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagrams Physical Demands • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPE Work Environment • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noise Competencies & Attributes • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting., • Embodies a “culture of safety” in all tasks and recommends safety improvements. Other: Must have a valid Driver’s License. Must have or obtain a Certified Pool Operator certificate within 6 months of hire. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Brazing, soldering, and industry standard pipe joining techniques. Physical requirements: • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Key Accountabilities: • Install HVAC filters in various types of air handlers., • Perform visual inspections of each unit during the service., • Take notes of any deficiencies and forward it to manager to contact the customer., • Ensure that the service truck is maintained properly and as noted in vehicles specification guide., • Accountability of all tools., • Loading truck, keep truck clean., • Make initial contact with the person in charge when arriving on site and explain the day's work., • At the completion of the work will remove and dispose of all trash that was created from the work., • Have the paperwork signed., • Make deliveries and pickups when necessary., • Perform other duties as assigned., • Date and initial filters in filter bank., • Must be a team player, able to work w/ others., • Able to climb all types of ladders., • Not be afraid of heights., • Must clean all debris and spent filters off of roof tops and dispose properly., • On occasion be able to go out of town for service jobs., • Assist in warehouse when not on a service job. Position Requirements: • High School diploma., • Basic Math and reading skills., • Must have transportation to and from the branch office., • Must be able to climb ladders and work in heights., • Able to lift up to 75lbs pounds., • Experience working both indoors and outdoors., • Experience driving box trucks of various sizes., • Forklift experience a plus., • Comfortable working with hand tools., • Valid driver’s license., • Clean driving record., • Must be able to pass a Drug Panel and DOT Physical Examination., • Full-Time Availability.Requirements: Position Requirements: • High School diploma., • Basic Math and reading skills., • Must have transportation to and from the branch office., • Must be able to climb ladders and work in heights., • Able to lift up to 75lbs pounds., • Experience working both indoors and outdoors., • Experience driving box trucks of various sizes., • Forklift experience a plus., • Comfortable working with hand tools., • Valid driver’s license., • Clean driving record., • Must be able to pass a Drug Panel and DOT Physical Examination., • Full-Time Availability.

Job Description Staff Management Group is seeking a Pit Operator for our client in Carlstadt, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 7AM - 3:30PM OR 8AM - 4PM, • Plus Overtime Pay Rate: • $19 / hour Job Summary: We’re hiring a Pit Operator to operate industrial trucks & stand-up and sit-down forklifts to load and unload trailers to then distribute and store materials. Job Responsibilities: • Move materials to and from production lines, loading docks, trailers, and designated storage areas, • Review daily work orders, production schedules, and shipping requests to complete tasks accurately, • Understand load capacities and equipment limits to ensure safe and efficient material movement, • Secure loads, wrap pallets, and prepare materials for safe transportation within the facility, • Inspect materials during handling and report discrepancies, damages, or equipment concerns immediately, • Operate forklifts and PIT equipment in full compliance with safety procedures and training standards, • Perform basic checks and minor servicing on PIT equipment; notify supervisors of required maintenance, • Update logs, inventory systems, and scanner entries to maintain accurate material tracking, • Maintain a clean, organized, and hazard-free work environment at all times, • Support additional warehouse tasks and operational needs as assigned. Job Requirements: • MUST be bilingual - English AND Spanish., • Valid forklift certification with a minimum of 3 years of PIT/forklift experience, • Capable of lifting up to 40 lbs and safely operating warehouse equipment, • Comfortable using handheld scanners and basic computer systems, • Strong multitasking ability, high attention to detail, and dependable work ethic, • Able to work independently and collaboratively in a fast-paced warehouse Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Job Title: Warehouse Worker Job Summary: We are seeking a dependable and detail-oriented Warehouse Worker to support daily warehouse operations. The Warehouse Worker will be responsible for receiving, storing, picking, packing, and shipping products while maintaining accurate inventory records and a safe, organized work environment. This role is ideal for someone who thrives in a fast-paced, team-oriented setting. Key Responsibilities: • Receive, inspect, and store incoming materials and products, • Pick, pack, and prepare orders for shipment according to company standards, • Accurately track inventory using RF scanners or warehouse management systems, • Load and unload trucks using pallet jacks, hand trucks, or forklifts, • Maintain cleanliness and organization of warehouse areas, • Follow all safety guidelines and company procedures, • Assist with cycle counts, inventory audits, and general warehouse projects as neededQualifications:, • Previous warehouse, distribution, or production experience preferred, • Basic math and computer skillsJob Type & Location This is a Permanent position based out of Saddle Brook, NJ. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saddle Brook,NJ. Application Deadline This position is anticipated to close on Jul 3, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionOverview: This position performs shipping and receiving responsibilities for company products and equipment. This position reports to the local Office Manager. Essential Functions: Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. • Completes daily receiving entries in a software system., • Participate in the management of raw materials and critical supply inventories, including maintenance and cleaning of inventory area, inventory organization and racking, inventory cycle counting and reporting, and routine inventory accounting., • Perform Quality Control inspection of inbound and outbound cases, equipment, and accessories,, • Performs general housekeeping, maintenance, and organization of the dock and inventory areas; includes hands-on cleaning and maintenance along with organization and interpersonal skills to coordinate with other departments. Conform to the 6S process., • Responsible for all warehouse functions including palletizing, de-palletizing, inbound/outbound order verification, and shipping/receiving duties, including lift truck and warehouse equipment operation., • Adherence to warehouse safety requirements and protocols., • Works closely with Logistics and performs cross-functional duties with other departments.Competency Requirements:, • Attention to detail, • Problem-solving skills, • Basic mechanic and electronic skills, • Moderate computer literacy, • Basic data entry skills, • Basic communication proficiency, • Basic organization skills, • Moderate time management skillsSupervisory Responsibilities: This position has no supervisory responsibilities. Work Environment: Work is regularly performed in a combination of office and warehouse environments and is regularly exposed to heavy machinery and noise. Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work: This is a full-time position. The days and hours of office operation are Monday through Friday 8:00am to 6:00pm. The specific schedule for this position is a 40-hour work week within the hours of business operation. Occasional evening and weekend work are required as job duties demand as well as a 24/7 rotational on-call schedule. Travel: Travel may be required for this position as mandated by the needs of the 8 Nationwide locations which would include out-of-area and overnight travel. Required Education and Experience: • Forklift Certification, • Minimum 1 year of experience in an industrial environment, • High School Diploma or equivalentPreferred Education and Experience:, • Forklift Certification, • 2+ year of experience in a related field, • 1 year of A/V technical experience, • Associate degree or technical certificate in a related fieldOther Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this position. Duties, responsibilities, and activities may change at any time with or without notice. QCpIUxuzF1

Job Description A Stock Control Clerk is responsible for monitoring, recording, and managing inventory levels to ensure that stock is available when needed and accurately accounted for. Key Responsibilities • Daily cycle count of electronic and non-electronic inventory, • Maintain accurate inventory records and stock databases in company system., • Receive, inspect, and record incoming goods and materials., • Count goods inward and compare against purchase orders and packing slips, • Monitor stock levels and identify shortages or excess inventory., • Conduct regular inventory audits and spot chd cks ., • Update stock movements, transfers, and adjustments in inventory systems., • Prepare inventory reports for management., • Coordinate with purchasing, warehouse, and sales departments., • Investigate and resolve inventory discrepancies., • Ensure proper storage and organization of stock items., • Follow company procedures for stock control and safety regulations. Required Skills • Experience with electronic components, • Good numerical and record-keeping skills., • Attention to detail and accuracy., • Knowledge of inventory management systems and Microsoft Excel., • Organizational and time-management skills., • Ability to work independently and as part of a team., • Good communication skills. Qualifications • Associates degree or accountant in training., • Previous experience in inventory, warehouse, or stock control is preferred., • Knowledge of stock management software is an advantage., • Minimum 3 years experience Sample Resume Job Description Managed inventory records, monitored stock levels, conducted regular stock audits, processed incoming and outgoing goods, investigated stock discrepancies, and maintained accurate inventory data to support efficient warehouse operations. Typical Past Work Environment • Warehouses, • B2B Electronic Distribution centers, • Manufacturing facilities, • Logistics companiesCompany DescriptionIndustrial telecommunications focused on public safety telecommunications and industrial communications. Extensive military applicationsIndustrial telecommunications focused on public safety telecommunications and industrial communications. Extensive military applications

Job Description Job Summary As a Sales Associate, you will be essential in providing exceptional customer service and ensuring a positive shopping experience. You will assist customers by understanding their needs, offering expert product recommendations, and facilitating transactions. Responsibilities also include maintaining inventory, managing pricing and product displays, and ensuring a clean and organized store environment. Your dedication to service will drive sales and build customer loyalty. At West Marine, our mission is to serve Boaters with a focus on "Know More, Get More, Boat More." Our customers rely on us to fulfill their needs, complete boat projects, or prepare for a great day on the water. Every interaction is an opportunity to exceed customer expectations and foster loyalty. West Marine is a Drug-Free Workplace and an Equal Opportunity Employer. Duties/Responsibilities • Greet and welcome customers as they enter the store., • Engage with customers to understand their needs using open-ended questions and active listening., • Provide detailed product knowledge and suggestive selling to enhance the customer’s boating experience., • Assist customers in selecting products and direct them to the appropriate aisle or location., • Inform customers about available services and assist with special orders or drop ship purchases., • Handle cash, credit, and on-account transactions accurately, including processing returns and managing the register., • Maintain accurate pricing by auditing and tagging merchandise, ensuring proper display and signage., • Assist with inventory management, including receiving, stocking, and replenishing merchandise., • Ensure the sales floor and aisles are neat, clean, and organized, removing any hazards or obstacles., • Support the buy online pick up in store (BOPIS) process and assist with buy online ship from the store as needed., • Alert management to potential security or loss prevention issues and assist in maintaining asset protection standards., • Complete all required training and review standard operating procedures (SOPs) for the position., • Be available to work a flexible schedule, including nights, weekends, and holidays., • Perform other job-related duties as assigned. Required Skills/Abilities • Strong verbal and written communication skills., • Ability to listen actively and respond to customer needs., • Proven sales and customer service abilities., • Familiarity with merchandise., • Point-of-sale systems; ability to learn new systems quickly., • Strong attention to detail and effective time management. Education and Experience • High school diploma or equivalent preferred., • Previous boating and/or retail experience preferred. Physical Requirements • Continuous standing and walking throughout the retail space., • Ability to wear and communicate through a headset continuously., • Frequent climbing, bending, stooping, and twisting., • Occasionally operate equipment, including forklifts., • Must be able to lift up to 50 pounds to shoulder height unassisted frequently. Minors under the age of 18 are subject to federal child labor laws that prohibit hazardous work, equipment operation, and exposure to dangerous conditions. Minors under 18 may not: • Operate, assist with, or be assigned to hazardous power‑driven machinery, including:, • Forklifts / powered industrial trucks, • Motorized pallet jacks, • Motorized conveyors, • Trash compactors and balers, • Power‑driven cutting, slicing, grinding, or processing machines, • Any other power‑driven equipment deemed hazardous, • Operate, assist with, or be assigned to conduct work involving, • Hot Knife, • Chain cutter,, • Other cutting instruments, • Transportation/Delivery, • Drive any motor vehicle as part of their job, • Act as a helper on delivery or transport vehicles, • Hazardous Materials & Chemical Exposure, • Handle, mix, or directly work with:, • Hazardous materials (HAZMAT), • Toxic, corrosive, or reactive chemicals, • Battery systems or chemicals posing burn/fire/explosion risk, • Clean up, respond to, or manage chemical spills, • Perform tasks involving significant exposure to hazardous substances, • HAZMAT Shipping & Logistics Activities, • Participate in hazardous materials shipping activities, including:, • Classifying hazardous materials, • Preparing hazardous shipments, • Signing or certifying shipping documents, • Independently handling regulated HAZMAT processes, • Hazardous Work Environments, • Work in areas where hazardous chemicals or materials are actively handled, processed, packaged, or shipped, • Work unsupervised in any area involving hazardous conditions Minors under 16 are subject to significantly stricter limitations and in addition to the limitation above may not: • Work in shipping, receiving, or warehouse operations, • Operate a manual pallet jack, • Perform backroom or logistics functions involving equipment or hazards, • Use a box cutter or any form of cutting instrument to open boxes or perform work., • Operate any power‑driven machinery Minors under 16 years old are limited to non‑hazardous, light‑duty retail tasks, such as: • Customer service, • Light manual stocking (nonhazardous materials only), • Basic cleaning (non‑hazardous materials only) West Marine offers a wide range of benefits, which include medical/dental/vision, various voluntary benefits, 401k, and paid time off. To view eligibility and additional information on these benefits, along with starting pay ranges for select states, please visit our benefits page at www.embbenefits.com/wm-home/. Join us at West Marine and help us provide the best boating experience for our customers!

Job Description Sales Associate Job Description Is environmental sustainability a core value of yours? Do you want to contribute to keeping food fresh, homes and people cool, industrial processes operating all with maximum energy efficiency and environmental sustainability in mind? All of this in a critical infrastructure industry? Then Hudson Technologies is the place for you! Hudson Technologies is the largest independent distributor of refrigerants and the largest refrigerant reclaimer in North America. Combined with our industry leading, patented, and proprietary On-Site Chiller Services and Global Energy Services we lead the way in lifecycle management of refrigerants and our commitment to the environment. Position Overview As a Sales Associate, you will be exposed to various aspects of the sales process, from lead generation to closing deals. You will work closely with our experienced sales team and receive training that will help you develop essential skills in communication, negotiation, and relationship building. This internship offers a unique opportunity to learn about the sales industry while contributing to real projects that impact the company's growth. Essential Duties and Responsibilities include, but not limited to: • Initiate outbound calls to potential customers or leads from provided lists or databases., • Identify and qualify potential customers by gathering relevant information and assessing their interest and needs., • Maintain records of interactions and follow up with leads or prospects as needed., • Accurately record information, update customer databases, and maintain call logs., • Achieve and exceed daily, weekly, or monthly sales quotas and performance metrics. Benefits: • Gain practical experience in sales and business development., • Receive training and mentorship from experienced professionals in the field., • Opportunity to work on real projects and contribute to the company's success., • Develop essential skills such as communication, negotiation, and time management., • Networking opportunities within the company and the industry., • Potential for future full-time employment based on performance and business needs. Education and Experience: • Currently pursuing a degree in Business or communications., • Strong verbal and written communication skills., • Enthusiastic and eager to learn about the sales process and the industry., • Excellent interpersonal skills and ability to build rapport with clients., • Basic understanding of sales principles and techniques is a plus., • Proficiency in Microsoft Office Suite and familiarity with CRM systems is preferred., • Detail-oriented and organized with the ability to manage multiple tasks., • Self-motivated and able to work both independently and as part of a team., • Professional demeanor and willingness to take initiative.

Overview: The position of E&I Engineer will provide technical direction to assigned design efforts pre-and post-award of projects and will report to the Engineering Department Manager. This position will play a critical role on the project development team and must have experience in high-voltage, switchyard or substation design as well as be an expert in relay protection and controls. Location and Travel Details: This is a remote role and can be based anywhere in the United States. Must be able to travel up to 30% of the time. Company Overview MasTec Industrial, along with sister companies Casey Industrial and Phoenix Industrial, has served the power industry since 1947. We support utilities, developers, and municipalities with EPC services and project development expertise. Ranked by ENR as the #1 Power Contractor, we specialize in natural gas, oil, biomass, and waste-to-energy projects. Our team brings over 30 years of experience in utility and industrial systems, including simple and combined cycle plants and reciprocating engines. We’re committed to delivering quality, safety, and value at every project phase, from concept to operations. At MasTec Industrial, we invest in top talent and foster a respectful, inclusive environment where employees thrive as innovative leaders. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: • Review RFP/RFQ/Contract packages for technical requirements, • Prepare and maintain proposal technical exceptions and clarifications during the proposal process, • Develop technical bid packages for equipment and subcontractors, • Prepare technical evaluations and technical recommendations for equipment and subcontractors, • Monitor, support and administer technical subcontractors, • Review engineering deliverables for accuracy and Contract compliance, • Manage 3rd party engineers for progress, quality, and cost for specific discipline, • Provide input to schedule development, • Provide input to estimating regarding quantities and scope, • Support development of project reports and status updates, • Facilitate constructability reviews with engineering and construction parties, • Support construction and commissioning during and after completion of design engineering, for example RFI responses, • Develop project division of responsibilities, • Development of technical elements of project execution plans, • Visit sites as needed to assist on-site as required, • Visit subcontractors and suppliers to monitor progress and quality as required, • Support project closeout Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS: • 4-8 years of relevant experience in engineering, • Bachelor’s degree in Engineering, • PE Certification and desire and ability to obtain PE Certification in other states as a required for projects, • Capable to visit construction sites and operating industrial plants KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Enthusiastic, willing to learn and flexible regarding day-to-day responsibilities, • Skilled in oral and written communication, • Passionate to be a technical team member to accomplish a high-quality product that satisfies the contractual requirements within budget and schedule, • Technical interdisciplinary communication and knowledge to enable other technical groups to produce a high-quality product, • Knowledgeable in industry standards, specifications and organizations, • Experience with execution of multiple EPC projects from bid through project completion, • Experience in developing, executing and presenting a high-quality proposal to management, • Other may duties may be assigned PHYSICAL DEMANDS: This position requires prolonged sitting at a desk and working at a computer. Must be able to lift up to 20 pounds at times. What's in it for you: Financial Wellbeing • Compensation $140,000 - $180,000 per year, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Remote Appcast (For Export): #appred

Overview: The Lemartec Senior Safety Manager is responsible for promoting and ensuring site safety and has a comprehensive knowledge of the day-to-day safety field operations for their assigned project(s), including planning, coordinating, and enforcing safety regulations and codes while serving as the company’s point of contact for owners, subcontractors, regulatory agencies, and Lemartec’ s team for all safety-related matters. Provides appropriate safety and health, accident prevention, and investigation training for managers and supervisors. Assists management in the annual safety overviews. Conducts safety meetings, audits, and inspections to ensure compliance, evaluate performance, identify corrective action, and implement follow-up assessments. Plans, implements, and conducts preventative care, safety, and compliance training programs. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, requiring travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, WY, and additional locations are added frequently as our organization continues to grow. Company Overview Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: • Develop and conduct safety processes and training which provide ongoing safety awareness, emergency response and safety orientation for new employees, • Development, delivery, and maintenance of all required OSHA written management processes to include recordkeeping requirements per local, state and federal regulations, • Perform daily site safety inspections and the inspection of safety equipment; removal of any defective equipment and manage the fall protection equipment inspection procedures, • Establish a schedule for the preparation, submittal, review, and acceptance of Job Hazard Analysis, • Develop, implement and maintain comprehensive accepted Job Hazard Analysis program through tracking log, • Accident Reporting, Accident Investigation and Recordkeeping, • Ensure subcontractor compliance regarding safety and health requirements, • Compile, analyzes, and interprets statistical data related to near-miss, incidents, injuries and illnesses, • Participate in fact finding Root Cause Analysis for injury/incident investigations and obtain accident and injury reports from jobsites, • Record and manage all site safety documentation and provide detailed weekly written reports, • Implements Company environmental policies in accordance with all existing and new State/EPA Laws and Regulations, • Recommends the purchase of all safety equipment, • Participate in safety pre-construction meetings and pre-work meetings, • Facilitate mass safety meetings and required weekly tailgate safety meetings, • Compile materials for safety meetings, prepare agendas, and record meeting minutes, • Manage and coordinate substance abuse testing and set up medical clinics for new jobsites, • Facilitate Lemartec’ s “return to work program” with employees, medical professionals, and project personnel Qualifications: Work Experience and Education • Bachelor’s Degree in occupational health or related field preferred, • A minimum of 10 years of work experience, • Previous Management experience is required, • OSHA 30 certification at a minimum, • Data center project experience preferred Knowledge/Skills/Abilities • Extensive working knowledge of OSHA regulations, ANSI standards, or other applicable codes, • Demonstrated construction safety experience with a field skill set, • Advanced Safety/Industrial Hygiene Certifications (CHST) or the ability to obtain the CHST preferred, • Experience in dealing with regulatory agencies, safety and health professionals, and legal representatives, • Proven ability to manage safety in a dynamic, fast-paced environment, • Full knowledge and understanding of all local, state, and federal OSHA requirements and construction safety, • Superior communication and organization development skills, • Strong interpersonal skills and ability to work with cross-functional teams, • Experience with the following software:, • Microsoft Office (Word, Excel, PowerPoint, etc.), • Document Control Programs (Procore) What's in it for you: Financial Wellbeing • Compensation Starting $130K per year / commensurate with experience, • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, and hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log in to your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal, and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-LV1 #LI-ONSITE Appcast (For Export): #appred

Job DescriptionTRANSPARENT ENERGY IS HIRING: ACCOUNT MANAGER Drive Client Success in the Leading Energy Procurement Platform Transparent Energy is one of the fastest-growing energy auction platforms in the U.S., having facilitated over $5.35 billion in energy transactions and created $375+ million in client savings. Combining advanced proprietary reverse auction technology with deep market expertise, we serve 3,500+ commercial, industrial, and government clients nationwide. The Opportunity We're seeking a motivated and detail-oriented Account Manager to join our revenue operations team. The ideal candidate will be responsible for managing client relationships, ensuring customer satisfaction, and driving revenue growth through effective account management and sales fulfillment. This role requires a proactive approach to client retention, contract management, and strategic account development. What's In It For You? • Competitive Compensation: Base salary with performance-based bonus tied to client retention and revenue growth, • Professional Growth: Clear advancement opportunities within our rapidly scaling organization, • Industry Impact: Work with Fortune 500 companies and major energy buyers to optimize their procurement strategies, • Collaborative Environment: Join a dynamic team focused on innovation and client success, • Comprehensive Benefits: Health & Life Insurance, PTO, Paid Holidays, and professional development opportunitiesWho We’re Looking For A client-focused professional with: Required Qualifications: • Bachelor's degree in Business, Marketing, or related field, • 5 years of experience in account management, sales, or client success roles; 2 years of experience in energy sector, • Strong interpersonal and communication skills with ability to build relationships at all levels, • Proven track record of managing client accounts and driving revenue growth, • Proficiency in CRM software and Microsoft Office Suite, • Ability to work independently and as part of a team in a fast-paced environment, • Hybrid Schedule for employees based in North Jersey & Chicago, will consider remote applicantsPreferred Experience:, • Understanding of retail energy products and market dynamics, • Advanced proficiency in Excel and data analysis tools, • Experience managing complex, multi-site client accountsKey Responsibilities Client Relationship Management: • Serve as the primary point of contact for assigned accounts, building and maintaining strong relationships with clients, • Understand client energy needs and provide tailored solutions to meet their requirements, • Proactively address client issues and ensure high levels of customer satisfaction, • Create compelling, data-driven presentations for client executivesSales Fulfillment & Contract Management:, • Manage the sales process from contract execution through service delivery, ensuring seamless client experience, • Oversee fulfillment of client contracts, ensuring all aspects of service delivery are met, • Manage sophisticated contract flows and data for multi-site, multi-state energy agreements, • Coordinate with pricing & market intelligence teams to facilitate procurement events, • Coordinate with supply partners to address high-priority client issues and ensure contract performanceLead Generation & Campaign Support:, • Collaborate with marketing team on company-related lead generation campaigns targeting potential clients, • Support marketing campaigns by providing client insights and feedback, • Identify and engage with prospects through company marketing initiatives, • Utilize CRM and marketing platforms to track and nurture leads generated through company campaignsRetention & Revenue Expansion:, • Focus on client retention through proactive relationship management and issue resolution, • Identify opportunities for upselling and cross-selling additional services to existing clients, • Conduct market analyses to inform pricing strategies and identify expansion opportunities, • Develop strategies to maximize client lifetime value and account growthAncillary Services & Upselling:, • Identify opportunities to upsell existing procurement clients on complementary energy services including demand response programs, community solar initiatives, and bill auditing services, • Develop strategic approaches to introduce value-added energy solutions that complement core procurement offerings, • Collaborate with service delivery teams to understand and effectively position ancillary services based on client energy profiles and needs, • Track and report on success metrics for ancillary service adoption within assigned accountsData Management & Reporting:, • Maintain accurate records of client interactions and account activities in CRM system, • Generate reports on account performance, client satisfaction, and revenue metrics, • Analyze client data to identify trends and opportunities for account optimization, • Track and report on key performance indicators related to client success and retentionAbout Transparent Energy Since 2009, Transparent Energy has revolutionized energy procurement through our proprietary reverse auction technology. We've executed 5,400+ energy supply contracts, managed 350+ billion sq. ft. of real estate, and procured 33+ million MWh of power, and 100+ DTh natural gas and 8.5+ million RECs, PPAs, VPPAs & Asset backed retail contracts, demand response, & bill auditing & benchmarking. Our mission is to simplify complex energy procurement while delivering exceptional value to our clients. Ready to Power Client Success? Join our team and help drive the future of energy procurement. Apply today to build meaningful client relationships while contributing to substantial energy savings for major organizations.Transparent Energy is an equal opportunity employer committed to diversity and inclusion. Powered by JazzHR cFn72QTPbX

Job Description Corporate Paralegal • § Practice Area: Sophisticated Corporate Transactions and Healthcare Regulatory Compliance, • § Location: Roseland, NJ, • § Salary: $100k+ (negotiable depending on experience), • Comprehensive benefits package including medical, dental, vision, life, and disability insurance, 401(k) retirement plan, and paid time off., • Support staff may also be eligible for discretionary year-end bonuses and merit-based increases., • § Schedule: Full-time, Direct-Hire, Standard Professional Office Hours § The Firm: Our client is a rapidly growing and increasingly regarded law firm with headquarters in Roseland, NJ, where they established operations almost 100 years ago. Moving into 2026, they have recently opened their first office in New York City and continue to see healthy growth with the Manhattan office closing in on 20 attorneys total. They are renowned for their roots in commercial and industrial real estate practice, corporate litigation and with the addition of a new Managing Partner in 2020 have been expanding widely within healthcare law. The firm champions a collegial, integrity-driven culture, prioritizing the professional development of its staff and fostering an environment where exceptional support talent is both valued and rewarded. This is an opportunity to join a dynamic corporate practice during a period of serious growth. § Duties: The qualified individual will serve as a key player in execution and closing of multi-million dollar mergers & acquisitions, ensuring that clients see a smooth and safe transactional relationship by conducting heavy due diligence on potential acquisitions, scrutinizing each entities regulatory framework to ensure full compliance has been met and will continue to be in regards to the state and federal regulations revolving around healthcare services, medical providers, Medicare and Medicaid regulations and other critically important structures necessary to avoid non-compliance. While healthcare law experience is desired, it is not required for this role. What the Partners need most importantly is a Corporate Paralegal who has handled large corporate entity formations, transactions, governance and related UCC matters. § Core responsibilities include: ⨖ Assisting attorneys in the comprehensive execution of mergers, acquisitions, joint ventures, and corporate reorganizations, from inception through post-closing integration. ⨖ Performing exhaustive corporate due diligence, including review of organizational documents, minute books, stock ledgers, and maintenance of digital data rooms. ⨖ Managing and preparing Uniform Commercial Code (UCC) filings, searches, and terminations across various jurisdictions, ensuring perfection of security interests. ⨖ Drafting, compiling, and managing all closing documents, including officer certificates, corporate resolutions, schedules, exhibits, and post-closing organizational checklists. ⨖ Preparing and filing regulatory documents with state and federal agencies related to entity formation, business licensing, and healthcare-specific compliance matters (e.g., Certificates of Need, governmental program enrollments). ⨖ Maintaining and updating corporate records, governance materials, and entity management databases for a broad portfolio of client organizations. ⨖ Conducting foundational legal research on corporate governance, transactional mechanics, and specific healthcare compliance statutes to support attorney advisement. § Qualifications: Candidates must possess the requisite foundation and experience to immediately manage the core responsibilities of sophisticated corporate transactions. ⨖ A Juris Doctor (J.D.) from an ABA-accredited law school OR a Paralegal certificate from an accredited program. ⨖ A minimum of Five (5) years of direct, substantive experience as a corporate paralegal, with a demonstrated focus on Mergers & Acquisitions (M&A). ⨖ Proven expertise in the lifecycle of corporate entities, including formation, maintenance, and dissolution, with hands-on experience in UCC matters. ⨖ High proficiency in MS Office Suite, Adobe Acrobat, and modern document management and e-closing platforms. ⨖ Exceptional organizational abilities and a highly detail-oriented work ethic crucial for managing complex transaction timelines and data integrity. § Skills: The following are preferred traits and abilities not required, but would enable the candidate to excel in this position ⨖ Direct experience supporting transactions within the healthcare sector is preferred, although not required, including application of Medicare/Medicaid regulations, Stark Law, AKS, HIPAA. ⨖ Advanced proficiency in electronic document organization and management to a professional legal standard. ⨖ Demonstrated ability to work autonomously, prioritizing multiple high-priority tasks in a deadline-driven environment. ⨖ A professional and discreet demeanor when handling sensitive and confidential client information. !Notice¡ This a job advertisement on behalf of our client and does not reflect the full job description for the role. Any qualified candidates are encouraged to apply. This posting does not constitute an offer of employment and the listed compensation details may vary by state or experience and will be discussed thoroughly during interview phase.

Job Description T&M Associates is seeking a senior‑level client leader with deep experience and relationships within Oil & Gas, Industrial Manufacturing, and Chemical Manufacturing environments. This role combines strategic client management with proactive business development to expand T&M’s presence across North America. The ideal candidate is both a trusted client advocate and a strategic partner—focused on retention, growth, and long-term success for both our clients and the company. T&M is headquartered in the Northeast region, with offices strategically located throughout the country. This position can be located in proximity to any of our regional offices – NJ, PA, OH or IN. Key Responsibilities: • Client Relationship Management: Serve as the primary point of contact for assigned clients, ensuring smooth onboarding, timely communication, and a consistent, high-quality client experience., • Retention & Growth: Develop and execute strategies to strengthen client relationships, increase retention, minimize churn, and identify opportunities for cross-selling and upselling across T&M’s full suite of services., • Strategic Oversight: Oversee delivery of services to ensure satisfaction, quality, and alignment with client expectations. Collaborate with internal teams to ensure tasks are completed effectively and client commitments are met., • Client Advocacy & Engagement: Act as an advocate for client needs while balancing company objectives. Proactively address and resolve issues, ensuring both client satisfaction and operational efficiency., • Business Development: Identify and pursue new business opportunities through prospecting, networking, and industry engagement. Leverage existing relationships in Oil & Gas, Industrial Manufacturing, and Chemical Manufacturing sectors to drive regional growth., • KPI Management: Monitor and report on key performance indicators such as client retention rate, booked new business, net revenue growth, cross-selling activity, and direct labor multiplier to ensure alignment with company goals., • Strategic Planning: Play a key role in client selection, engagement decisions, and management assignments. Collaborate with leadership to align account strategies with broader business objectives., • Cross-Functional Collaboration: Partner with internal technical, operational, and sales teams to deliver tailored, high-value solutions that meet regulatory standards (RCRA, OSHA, environmental compliance)., • Market & Industry Insight: Stay current with industry trends and compliance requirements to provide clients with informed, strategic recommendations. Skills & Experience: • 15–20 years of private-sector experience in client management, business development, or sales, preferably within industrial, energy, environmental or engineering industries., • Proven success in maintaining and expanding long-term client relationships., • Strong negotiation, communication, and diplomacy skills to balance client advocacy with organizational goals., • Demonstrated ability to monitor and achieve key performance metrics., • Existing, verifiable relationships within industrial markets highly preferred., • Proficient in CRM tools, pipeline management, and performance reporting., • Willingness to travel regionally (including overnight) to meet with clients and attend industry events. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $160,000 and $192,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job DescriptionJob Summary We a re seeking a skilled Welder to perform maintenance, installation, and troubleshooting of radiation-shielded and RF-shielded door systems. This role involves mechanical and electrical work on large automatic mechanisms, ensuring precise alignment and compliance with safety standards in medical and industrial environments. Candidates must be able to work independently, communicate effectively with customers, and maintain professionalism in challengi ng settings. Key Responsibilities Pe rform routine maintenance on radiation-shielded and RF-shielded door systems. Install, align, and calibrate automatic door systems, heavy-duty operators, and safety sensors. Troubleshoot and diagnose mechanical and electronic issues in automatic door systems. Ensure precise adjustments and alignment of linear motion systems to meet performance standards. Provide customer guidance on proper operation and safety procedures. Communicate effectively with customers to understand needs and provide technical support. Prepare detailed service reports for management and customers. Coordinate pre- and post-project communications to manage expectations and ensure milestones are met. Adhere to safety guidelines and regulations, including mandatory PPE use per ANSI Z49.1. Communicate progress, issues, and recommendations to project management. Perform additional tasks as assigned by the Service Operations Manager or General Mana ger. Required Qualifications High school diploma or equivalent. Welding experience required; certified welder preferred. Strong mechanical and electrical troubleshooting skills, especially with automatic doors, linear motion systems, and safety interlocks. Ability to read and interpret technical manuals and schematics. Excellent communication and customer service skills. Ability to lift and carry heavy equipment. OSHA 30 Construction certification. Preferred Qualifications Tec hnical certification or associate degree in electrical, mechanical, or automation fields. Experience with PLCs or other control systems. Familiarity with ANSI/BHMA standards and safety guidelines for automatic door systems. MRI/RF experience highly desirable. Forklift, scissor lift, and first-aid certifications pr eferred. Certifications (if anys Ce rtified Welder (preferred). OSHA 30 Construction certification (required). Forklift, scissor lift, and first-aid certifications (preferred). Education: High School Certification: Certified WelderCompany DescriptionCompunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice. We have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice.\r\n\r\nWe have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.

Job Description Staff Management Group is seeking a Production & Inventory Associate for our client in Oakland, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 9AM - 5PM, • Monday - Friday Pay Rate: • $20 / hour Job Summary: We are hiring a dependable Production & Inventory Associate to support both production and warehouse operations. This position is a hands-on role that includes operating a UV printing machine to personalize promotional products such as poker chips, golf balls, and other custom items. The associate will also assist with receiving inventory, organizing shipments, and occasionally transporting materials between nearby facilities. The ideal candidate is bilingual, detail-oriented, and able to work efficiently in a fast-paced environment. Job Responsibilities: • Operate UV printing equipment to produce high-quality customized products, • Set up items and prepare materials for printing (poker chips, golf balls, and other promotional merchandise), • Inspect finished products to ensure print accuracy and quality standards, • Receive incoming inventory and verify shipment contents, • Organize, store, and maintain inventory in designated areas, • Keep the production and warehouse workspace clean, safe, and organized, • Drive a company U-Haul as needed to transfer inventory between local locations (approximately a 20-minute trip), • Support additional warehouse and production tasks as assigned Job Requirements: • MUST be bilingual - English AND Spanish, • Ability to lift and move boxes up to 50 lbs regularly, • Strong work ethic and ability to keep up in a fast-moving environment, • Excellent attention to detail and quality control, • Valid driver’s license and clean driving record (U-Haul driving experience is a plus), • Willingness to learn and follow UV printing procedures and production guidelines, • Reliable, punctual, and able to work independently or as part of a team Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job DescriptionRole Overview: The Environmental, Health & Safety (EHS) Specialist is responsible for developing, implementing, and maintaining environmental, health, and safety programs across two manufacturing and warehouse facilities. This role ensures compliance with OSHA, EPA, and other regulatory requirements while promoting a proactive safety culture throughout the organization. This is a highly hands-on position requiring experience in manufacturing or warehouse environments, with a strong focus on OSHA compliance, employee training, incident investigations, hazard identification, and environmental health and safety programs. The ideal candidate is organized, detail-oriented, and passionate about driving workplace safety and regulatory compliance. Job Requirements: • Bachelor's degree in Environmental Science, Occupational Health & Safety, Industrial Hygiene, or a related field preferred., • Minimum 2+ years of EHS experience within a manufacturing or warehouse environment., • Strong knowledge of OSHA regulations, including OSHA 300 Logs, incident investigations, and regulatory reporting., • Understanding of EPA, RCRA, environmental regulations, and hazardous material management., • Experience conducting safety training, new hire orientations, and regulatory compliance programs., • Experience leading incident investigations, root cause analysis, and implementing corrective actions., • Knowledge of Lockout/Tagout (LOTO), Hazard Communication, PPE, machine guarding, and workplace safety programs., • Experience maintaining Safety Data Sheets (SDS), compliance documentation, and audit records., • Strong communication, presentation, and employee training skills., • Strong organizational, analytical, and problem-solving abilities., • Professional certifications such as OSHA 30, CSP, or CHMM are preferred.Personal Attributes / Skills:, • Strong commitment to workplace safety and regulatory compliance., • Excellent leadership, coaching, and employee engagement skills., • High attention to detail and documentation accuracy., • Strong communication and interpersonal skills., • Ability to work independently while collaborating with cross-functional teams., • Proactive mindset focused on continuous improvement. Physical Requirements: • Frequent walking throughout manufacturing and warehouse facilities., • Ability to conduct inspections in active production environments., • Occasional lifting of safety equipment or training materials as required., • Comfortable working around manufacturing equipment and warehouse operations. Key Responsibilities: • Maintain EHS Compliance: Develop, implement, and maintain environmental, health, and safety programs in compliance with OSHA, EPA, and regulatory requirements., • Deliver Safety Training: Conduct new hire orientations, refresher training, and hands-on instruction for LOTO, Hazard Communication, PPE, emergency response, and other safety programs., • Lead Incident Investigations: Investigate accidents, injuries, and near misses while performing root cause analysis and implementing corrective actions., • Manage Regulatory Documentation: Maintain OSHA logs, Safety Data Sheets (SDS), environmental records, and other compliance documentation., • Conduct Safety Audits: Perform routine inspections of manufacturing and warehouse operations to identify hazards, verify compliance, and recommend improvements., • Monitor Environmental Compliance: Oversee hazardous material handling, waste management, and environmental compliance activities., • Coordinate Emergency Preparedness: Organize fire drills, emergency evacuations, and emergency response procedures., • Support Safety Programs: Promote behavior-based safety initiatives and partner with leadership to strengthen the company's safety culture., • Manage Safety Vendors: Coordinate vendors supporting PPE, first aid, hazardous waste disposal, and other safety-related services., • Support Regulatory Inspections: Serve as the primary contact during regulatory inspections and maintain audit-ready conditions., • Perform Safety Inspections: Complete monthly inspections of fire extinguishers, cranes, hoists, and other required safety equipment., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com so we can assist you.

Job DescriptionTitle: Product Manager Location: Lodi, NJ (100% onsite0 Overview:Sterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. Hire Type: Direct HireBenefits: Medical, Dental, Vision, 401k Matching Bonus/ Incentives/ Stock Options: Annual Bonus Potential Pay: $110,000-140,000 Job Summary: • We are looking for a strategic Product Manager to lead innovation and drive product strategy across a broad portfolio. This position focuses on leveraging data, insights, and competitive analysis to influence internal product decisions that impact the entire customer base, rather than simply fulfilling individual customer requests. The ideal candidate has experience in retail manufacturing environments with exposure to multiple products, preferably in durable, rugged, or industrial-style product categories. This role will be part of a small team of three hires with staggered start dates. Job Duties: • Lead product innovation initiatives through competitive research and gap analysis, • Analyze competitor offerings and recommend enhancements or adjustments, • Own and interpret product data and insights to guide strategic decisions, • Drive internal product strategy and decisions, ensuring scalability across the customer base, • Collaborate cross-functionally to align product direction with business goals, • Support continuous improvement efforts across a diverse product portfolio Qualifications: • 4+ years of Product Management experience with a focus on innovation, gap analysis, and competitive research, • Proven ability to lead internal product strategy rather than executing solely customer-driven requests, • Background in retail manufacturing with experience managing multiple products, • Strong analytical skills and a data-driven mindset, • Career stability with demonstrated long-term commitments, • Excellent communication skills and comfort working collaboratively across teams Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description Manufacturing Applications Engineer – Industrial Manufacturing Our client, a leading company in the industrial manufacturing sector, is seeking a detail-oriented and customer-focused Manufacturing Applications Engineer. This is a unique opportunity to join an innovative team and play a pivotal role in supporting customers, distributors, and internal stakeholders with expert technical solutions. If you are passionate about engineering applications and thrive in a fast-paced environment, this is an exceptional opportunity to make an impact in a respected manufacturing organization. • Serve as the initial point of contact for technical assistance concerning manufactured products, providing expert support to customers and distributors., • Analyze customer use cases for products, recommend tailored solutions, and offer guidance based on in-depth product and application knowledge., • Respond to technical inquiries, collaborating with internal teams for comprehensive solutions when required., • Manage and process customer requests for formal price quotations, lead times, order placements, changes, and cancellations., • Build and maintain strong customer and distributor relationships, ensuring high levels of satisfaction and repeat business., • Expedite and trace shipments by coordinating with production, sales, shipping, and logistics partners, proactively following up on outstanding inquiries., • Provide price and delivery quotations for standard products and refer customers to designated distributors as appropriate., • Assist customers in selecting optimal products for their specific needs and maintain accurate records in the sales contact management system., • Support the Vice Presidents of Engineering and Sales/Marketing through collaborative initiatives and feedback., • Offer feedback to engineering teams on potential new products or enhancements based on customer insights., • Participate in relevant industry trade associations and travel as necessary to attend events and meet client needs., • As needed, fulfill duties similar to a Customer Service Representative to ensure seamless customer experience. Requirements: • Bachelor’s degree in Engineering, Manufacturing, or a related technical field required., • Ability to read and interpret technical drawings and specifications., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint)., • Exceptional verbal and written communication abilities., • Advanced mathematical competency, including statistical and financial analysis skills., • Strong analytical problem-solving capabilities and the ability to address complex challenges.

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Provide technical guidance and equipment selection across standard and custom applications. Application Engineering • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Review technical specifications, drawings, and customer documents to ensure alignment with scope and capability. Project Coordination & Proposal Support • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Track and follow up on opportunities and orders to ensure successful handoff from sale to execution. Customer & Sales Team Development • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Conduct on-site visits, product demonstrations, and technical presentations to deepen customer relationships and close deals. Market & Sales Growth • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Attend tradeshows and industry events to promote solutions and strengthen brand presence. Documentation & Reporting • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job Description COMPANY PROFILE: At WTEC Energy, we help bring power to millions of people and businesses across the United States. Headquartered in Hasbrouck Heights, NJ, we are a leading manufacturer servicing the energy market with locations in 4 states. WTEC Energy is a privately held company committed to providing innovative, sustainable energy products and solutions for today and tomorrow. We service and support diverse markets including: Renewables (Solar and Wind), Electric Utility (Transmission, Substation and Distribution), Oil & Gas (Refineries and Production), Communications (Fiber Optic), Industrial OEM (Wind Turbine) and Petrochemical. WTEC Energy is a Minority Business Enterprise (MBE) that promotes a positive work environment where individual contributions, innovation, and cultural diversity are valued. We are proud to offer competitive compensation and employee benefits with significant career growth potential. COMPANY WEBSITE: http://www.wtecenergy.com Essential duties: • Process Bi-weekly payroll ·, • Create specialized reporting for management. ·, • Report on any payroll discrepancies ·, • Handles employees’ inquiries regarding payroll information. ·, • Maintain records on vacation, sick leave, etc ·, • Process new hires, terminations, salary increases etc. in the payroll system on a timely manner. ·, • Assist HR/Benefit Operations team with other tasks as needed ·, • Process manual checks for state mandated payments, terminations, etc. ·, • Provide back-up support to other Payroll Administrators, as required Qualifications • Bachelor degree required . Accounting is preferred ., • 5-7 years of experience in similar role is required., • Excellent excel skills., • Analytical skills and attention to details., • Excellent communication skills, • Deep understanding of the payroll laws and regulations . Work Environment This job operates in a professional office setting. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines to perform day to day duties and activities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Benefits We offer our employees a competitive salary and benefits package, which includes a comprehensive Medical, Vision, and Dental Plan, Company paid Life and Disability Insurance, 401(k) Plan, and Education/Certification assistance. WTEC Energy is an equal opportunity employer. We recognize the power and importance of a diverse employee population and strongly encourage applicants with various experiences and backgrounds

Job Description Manufacturing Maintenance Engineer Essex County, NJ • Lead advanced troubleshooting and repairs of mechanical, conveyor and electrical issues, • Partner with maintenance technicians to execute preventive and predictive maintenance strategies., • Identify and implement opportunities for process improvements to enhance equipment reliability and operational efficiency., • Collaborate closely with production teams to support day-to-day operations and ensure rapid resolution of equipment-related concerns., • Conduct root cause analyses on recurring problems and engineer long-term, sustainable solutions., • Assist with the installation, commissioning, and integration of new manufacturing equipment., • Maintain thorough documentation of maintenance activities within the computerized maintenance management system, • Mentor and provide technical support to maintenance technicians to enhance their troubleshooting skills and equipment knowledge., • Perform additional duties as assigned to support the maintenance and engineering teams. Requirements: • Bachelor’s degree in Engineering, • 2 years of experience in maintenance engineering, preferably within a manufacturing or industrial environment.

Job Description Bookkeeper / Accountant / Office Administrator Location: Carlstadt, New Jersey Schedule: Monday – Friday | 8:00 AM – 4:00 PM Position Type: Full-Time | In-Office Only (No Remote / No Hybrid) Estimated Start Date: September 1, 2026 Interviewing Immediately Salary Range: $65,000 – $125,000 (based on experience) Benefits: Medical benefits covered 100% by employer Our client is a well-established heavy earthwork, excavation, and site development subcontractor based in Northern New Jersey, specializing in industrial, commercial, and residential site development projects throughout New Jersey. Due to continued growth, they are seeking an experienced Bookkeeper / Accountant / Office Administrator to join their team in Carlstadt, NJ. This position requires a highly organized and detail-oriented professional with strong construction accounting experience and advanced proficiency using Sage Intacct. The ideal candidate will be comfortable working in a fast-paced construction office environment and handling both accounting and administrative responsibilities. Responsibilities • Manage daily accounting and bookkeeping functions for the company, • Handle accounts payable, accounts receivable, invoicing, reconciliations, and general ledger activities, • Maintain accurate financial records and assist with monthly and year-end closing processes, • Process subcontractor and vendor invoices, lien waivers, and payment tracking, • Assist with job costing, project cost tracking, and construction financial reporting, • Coordinate with project managers and ownership regarding project budgets and financials, • Prepare financial reports, spreadsheets, and supporting documentation, • Support office administration and day-to-day operational activities, • Draft, manage, and respond to professional emails and written correspondence, • Maintain organized filing systems and project documentation, • Assist with payroll coordination and employee administrative support, • Communicate professionally with clients, vendors, subcontractors, and internal staff Requirements • Minimum of 5 years of Sage Intacct experience REQUIRED, • Minimum of 5 years of construction accounting experience, • Prior experience working for a construction management firm, heavy civil contractor, excavation contractor, site development contractor, or related construction company strongly preferred, • Strong understanding of:, • Construction accounting, • Job costing, • Project billing, • Vendor and subcontractor management, • Excellent communication, writing, and email correspondence skills, • Highly organized with strong attention to detail and follow-through, • Ability to multitask and prioritize responsibilities in a fast-paced office environment, • Strong proficiency with Microsoft Office Suite including Excel, Word, and Outlook, • Must be dependable and able to work onsite in Rutherford, NJ five days per week, • No remote or hybrid work available Preferred Industry Experience Experience supporting construction projects involving: • Heavy earthwork, • Site excavation, • Underground utilities, • Industrial developments, • Commercial developments, • Residential developments, • Site development construction EQUAL EMPLOYMENT OPPORTUNITIES NorthPoint Staffing, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Job Description:- We are looking to hire an Automation Engineer to assist the Engineering team. The perfect candidate will have experience working on large-scale automation systems and is comfortable writing code from scratch. The Automation Engineer will have responsibility for daily troubleshooting of automation devices such as point level sensors, operator interfaces, networking, burner controllers, conveyors and variable frequency drives. There are multiple projects that the Automation Engineer will be responsible for, such as executing controls upgrades for Coffee Roasters, rewriting the Coffee Transport system and commissioning retrofits to additions to the Transport system. The Automation Engineer will be overseen by two senior level engineers. All new programming at our company is being updated to simplify machine control, reduce operator related errors by standardizing HMI development to ISA-101, incorporate modular programming practices, and integrate with an ERP system, Plex. We uses Rockwell Automation for most automation related equipment, and Ignition Perspective for operator interfaces. Requirements:- Experience building and designing electrical control panels Experience programming industrial control systems and operator interfaces Self-motivated, works well independently or as part of a team, and expresses genuine curiosity in their role. Strong attention to detail and problem-solving skills Must be comfortable working in a production environment, supporting system uptime, and troubleshooting. Possibility of working late and working weekends. Personnel will be required to learn the intricacies of our coffee process before they are able to start on projects. Must have a Bachelor's Degree in Engineering or like field. Must have 3-5 years of industry experience. Tools to be Used:- Studio 5000 Logix Designer Ignition Perspective FactoryTalk View SE/ME Microsoft Suite (Excel, Visio, etc.) Benefits: 401(k) Dental insurance Flexible spending account Health insurance Health savings account Paid time off Vision insurance Work Location: In person Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: This role is ideal for an engineer who is comfortable wearing many hats, solving urgent production issues, and working directly with toolmakers, CNC machinists, quality personnel, and production teams. The successful candidate will act as a technical problem-solver on the manufacturing floor, with a strong focus on progressive tooling, CNC manufacturing methods, root-cause analysis, quality improvement, and production support. This is not a desk-only engineering role. The position requires someone who can move between engineering, quality, the tool room, and production to identify problems, develop practical solutions, and keep manufacturing running efficiently. Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Requirements: Key Responsibilities: 1. Manufacturing & Production Support: • Provide hands-on engineering support for day-to-day production issues., • Troubleshoot manufacturing problems related to tooling, CNC machining, part quality, and process stability., • Work directly with operators, toolmakers, machinists, and production supervisors to resolve urgent shop-floor issues., • Evaluate production methods and recommend improvements to increase efficiency, repeatability, and throughput., • Support corrective actions when production parts do not meet dimensional, cosmetic, or functional requirements., • Assist with setup optimization, process validation, and manufacturability improvements. 1. Tooling & Tool Room Support: • Support the tool room with troubleshooting and improvement of progressive tooling and related production tooling., • Assist in identifying tooling wear, failure modes, alignment issues, and design-related problems., • Recommend tool modifications, repairs, or process changes to improve part quality and tool life., • Collaborate with toolmakers to develop practical solutions for active production problems., • Review tooling designs and provide engineering input for improvements, maintenance, and manufacturability. 1. CNC & Manufacturing Engineering: • Help determine effective CNC machining approaches for production components, tooling, fixtures, and secondary operations., • Work with CNC machinists/programmers to improve machining strategy, fixturing, tooling selection, and process reliability., • Support fixture design, tooling concepts, and process development for machined components., • Analyze machining-related issues such as tolerance variation, tool wear, chatter, setup errors, and cycle-time inefficiencies., • Recommend improvements to CNC processes that support quality, cost, and delivery goals. 1. Quality Control & Continuous Improvement • Apply quality control experience to investigate dimensional issues, nonconformances, and customer concerns., • Support root-cause analysis and corrective/preventive action activities., • Use inspection data to identify trends and recommend engineering or process changes., • Work with Quality Control to ensure parts meet drawings, specifications, and customer requirements., • Assist in developing or improving inspection methods, control plans, work instructions, and process documentation., • Promote practical continuous improvement initiatives across engineering, tooling, CNC, and production 1. Documentation & Cross-Functional Communication: • Read and interpret engineering drawings, tolerances, specifications, and manufacturing documentation., • Create or revise work instructions, process notes, inspection criteria, and engineering documentation as needed., • Communicate clearly with shop-floor personnel, quality staff, engineering, and management., • Document technical findings, corrective actions, and recommended process improvements., • Support engineering change activities when tooling, process, or product updates are required. Non-Essential Responsibilities: • Performs other duties as directed. Position Qualifications And Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others, • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills And Abilities: Required Qualifications: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related technical field preferred., • Equivalent hands-on manufacturing, tooling, CNC, or quality experience may be considered., • Experience in a manufacturing environment with direct shop floor involvement., • Working knowledge of progressive tooling, tool room operations, CNC machining, and production troubleshooting., • Quality control experience, including inspection methods, dimensional analysis, and corrective action support., • Ability to read and interpret mechanical drawings, GD&T, tolerances, and technical specifications., • Strong mechanical aptitude and practical problem-solving ability., • Comfortably working in a fast-paced production environment and responding to urgent issues., • Ability to communicate effectively with machinists, toolmakers, inspectors, operators, and management., • Proficiency with Microsoft Office and basic engineering documentation. Preferred Qualifications: • Experience with stamped, coined, precision metal, or small-component manufacturing., • Experience supporting progressive dies, punch tooling, fixtures, jigs, and production tooling., • CNC machining knowledge, including milling, turning, tooling selection, fixturing, and setup troubleshooting., • Familiarity with CAD software such as PTC Creo, AutoCAD, or similar., • Knowledge of GD&T and precision inspection equipment., • Experience with root-cause analysis tools such as 5 Why, fishbone diagrams, corrective actions, and process audits., • Exposure to ISO 9001, AS9100, IATF, or similar quality systems., • Experience in a high-mix, fast-paced manufacturing environment. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description Brimar Industries is looking for a highly motivated and technically capable Inside Sales Representative to join our growing team. This role is essential to delivering a fast, professional, and solution-oriented experience to our existing customer base. The ideal candidate is an exceptional communicator, a confident negotiator, and an agile multitasker who thrives in a fast-paced, B2B sales environment. You will be responsible for responding to inbound requests for quotes (RFQs), guiding customers through technical product configurations, and building long-term relationships that turn one-time buyers into loyal customers. Key Responsibilities: Sales Execution • Respond promptly and professionally to inbound RFQs generated by marketing, ensuring rapid engagement with existing customers., • Provide consultative pre-sales support including technical product guidance, solution configuration, and use-case alignment., • Manage the full sales cycle from quote to close using HubSpot CRM and digital quote-to-order platforms., • Own and update your pipeline, ensuring timely follow-up and consistent communication with all active opportunities. Customer Engagement • Conduct discovery calls to understand customer needs, project requirements, and purchasing timelines., • Provide an outstanding customer experience with a solutions-focused, value-driven approach., • Navigate complex procurement scenarios and lead negotiations with professionalism and confidence. Technical & Market Knowledge • Demonstrate and grow technical product knowledge across Brimar’s portfolio of signage, labeling, and traffic control products., • Understand and communicate relevant industrial standards and certifications such as ANSI Z535, OSHA 1910.145, MUTCD (Manual on Uniform Traffic Control Devices), and NFPA (National Fire Protection Association)standards., • Stay informed about competitor offerings and positioning to effectively differentiate Brimar’s solutions. Process Management • Maintain accurate records and sales activity within HubSpot CRM., • Work collaboratively with operations, product, and customer service teams to ensure seamless order fulfillment and post-sale support., • Identify and suggest improvements to tools, processes, or workflows that improve sales efficiency or customer satisfaction. Qualifications • 3+ years of inside sales experience in a comparable industry (e.g., industrial safety, hardware, tools, or technical B2B products)., • Proven experience selling physical products that require inventory coordination and meet regulatory certifications., • Proficiency with HubSpot CRM and digital quote-to-order platforms., • Strong discovery, qualification, and negotiation skills., • Comfortable managing multiple concurrent opportunities and follow-ups in a structured, organized manner., • Self-starter with strong drive for performance and continuous learning., • Passionate about delivering value and solving real-world safety challenges for customers., • Highly organized, detail-oriented, and able to thrive in a fast-paced sales environment. Preferred Qualifications • Knowledge of industrial safety regulations and product certifications (e.g., ANSI, OSHA, MUTCD, NFPA)., • Experience in B2B sales to government, institutional, or industrial buyers., • Familiarity with manufacturing lead times, logistics, and inventory-based sales cycles. Why Brimar? • Join a company at the forefront of safety and compliance solutions., • Be part of a dynamic, growing sales team with real opportunities for career advancement., • Work in a collaborative environment where your input is valued and your growth is supported.

Job Description Since 1948, RONDO has been a world-leading supplier of dough sheeting and shaping machinery to the bakery industry, offering artisanal to industrial solutions that produce the finest croissants, pastries, donuts, pizza, and bread products. Headquartered in Switzerland with additional factories in Italy and France, RONDO equipment solutions are sold and serviced to North American customers through subsidiary RONDO Inc., located in Moonachie, New Jersey. Due to tremendous growth, we are seeking a Service Coordinator to join the RONDO North America team. We offer a competitive salary + generous medical and dental benefits, and a 401(k) match of 4%: along with a warm and collaborative company culture dedicated to supporting the bakery community. www.rondo-online.com About the Role: The Service Coordinator in our manufacturing facility in New Jersey plays a critical role in ensuring seamless coordination and support for our service operations. This position is responsible for managing service requests, scheduling maintenance activities, and maintaining accurate records to support operational efficiency. The Service Coordinator acts as a liaison between the service team, customers, and other departments to facilitate timely communication and resolution of service issues. By organizing workflows and tracking service performance metrics, this role contributes directly to customer satisfaction and the overall reliability of our manufacturing processes. Ultimately, the Service Coordinator ensures that service operations run smoothly, supporting both internal teams and external clients effectively. Minimum Qualifications: • High school diploma or equivalent required; associate degree or higher preferred., • Minimum of 2 years experience in an administrative or service coordination role, preferably within manufacturing or a related industry., • Proficiency with Microsoft Office Suite (Word, Excel, Outlook) and experience with service management software., • Strong organizational skills with the ability to manage multiple tasks and priorities effectively., • Excellent communication skills, both written and verbal, to interact professionally with customers and internal teams. Preferred Qualifications: • Experience working in a manufacturing environment or with industrial equipment service operations., • Familiarity with ERP systems such as SAP for service and inventory management., • Create service tickets within C4C/SAP., • Basic understanding of manufacturing processes and terminology., • Customer service experience with a focus on problem-solving and conflict resolution., • Certification in office administration or project coordination is a plus. Responsibilities: • Coordinate and schedule service appointments and maintenance activities with internal teams and customers., • Manage service documentation, including work orders, service reports, and customer communications., • Serve as the primary point of contact for service-related inquiries, providing timely and accurate information., • Maintain and update service databases and tracking systems to ensure data accuracy and accessibility., • Collaborate with production, logistics, and quality assurance teams to support service delivery and resolve issues., • Monitor service performance metrics and assist in preparing reports for management review., • Support the service team with administrative tasks such as invoicing, parts ordering, and warranty tracking. Skills: The Service Coordinator utilizes strong organizational and communication skills daily to coordinate service activities and maintain clear, professional interactions with customers and internal teams. Proficiency in Microsoft Office and service management software enables efficient handling of scheduling, documentation, and reporting tasks. Analytical skills are applied to monitor service metrics and identify areas for process improvement. Problem-solving abilities help address service-related issues promptly, ensuring minimal disruption to operations. Additionally, familiarity with manufacturing processes and ERP systems enhances the ability to support cross-functional collaboration and maintain accurate service records.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: This position will report to the regional branch in New Jersey and work out of their home, ideally located in the territory. The territory for this position covers Nassau and Suffolk counties and the outer boroughs of Queens, Brooklyn, Bronx and Staten Island. Achieves maximum sales profitability, growth and account penetration within an assigned territory and/or market segment by effectively selling the Company’s products. Contacts and secures current and new business accounts/customers. Key Accountabilities: • Promotes/sells/secures orders from existing and prospective customers through a relationship-based sales approach highlighting the advantages/value proposition., • Demonstrates products to existing and potential customers and assists them in selecting those best suited to their needs., • Manages sales goals - profit and budget expenses., • Establishes, develops and maintains business relationships with current customers and prospective customers in the assigned territory/market segment to maintain current and generate new business., • Researches sources for developing prospective customers and for information to determine their potential., • Develops clear and effective written proposals and quotations for current and prospective customers., • Expedites the resolution of customer problems and complaints., • Coordinates sales effort with marketing, sales management, accounting, logistics and technical services., • Analyzes the territory/market’s potential and determines the value of existing and prospective customers to the Company., • Creates and manages a customer value plan for existing customers highlighting sales profile, share and value opportunities., • Provides management with detailed information on customer needs, problems, interests, competitive activities, and potential for new products., • Stays current with product applications, technical services, market conditions, competitive activities, and marketing trends and activities., • Participates in trade shows and conventions as required., • Perform other related duties as assigned as required. Requirements: Position Requirements: • Bachelor’s degree from an accredited university in Business or related field preferred;, • 5+ years' prior selling experience;, • Understanding and experience with high value-added product selling, pricing, and negotiation;, • Experience selling to healthcare and pharmaceutical facilities a plus;, • Ability to communicate a technical concept or value added benefit to achieve buy-in from diverse teams to meet sales targets and profitability;, • A history of consistently delivering on expectations for growth and profitability must be demonstrated;, • A team player that possesses a natural way of influencing, both internally and externally;, • A self-starter with a creative eye to implement marketing and promotional campaigns designed to achieve specific growth objectives regionally and nationally;, • Must be proficient in Microsoft Office (Word, Excel, PowerPoint);, • SAP or CRM experience, Salesforce preferred.

Job DescriptionSUMMARYThe Industrial Maintenance Electrical Technician main duties are the installation, troubleshooting and repairs of the facility’s electrical distribution systems, and the electrical and electronic components of the industrial machinery and equipment. The Maintenance Electrician position requires the ability to work with plant management to identify equipment and systems that can be modified or applied to improve operational efficiency and must perform the following duties to ensure compliance with all applicable legal and regulatory requirements and in accordance with established company policies and procedures while maintaining the highest levels of safety, quality and productivity.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.1. Diagnoses malfunctioning electrical infrastructure apparatus such as transformers, breakers, Motor Control Center’s (MCC’S), breakers and repairs/replaces damaged or broken components.2. Properly size and install power supply wiring and conduit for newly installed machinery and equipment.3. Properly connects power supply wires to machines and equipment, and connects control and communication cables and wiring between machines, equipment and devices such as Variable Frequency drives and PLC’s.4. Familiar with Variable Frequency drives and able to communicate faults, malfunctions and issues to BSM personnel or contractor integrators and perform requested tasks to repair and replace components.5. Working knowledge of Programmable Logic Controllers required and the ability to take applicable training courses to gain knowledge and skills to become proficient with PLC’s.6. Troubleshoot and tests malfunctioning machinery and controllers and discusses malfunction with maintenance supervisor and operators to determine root cause.7. Troubleshoot and repair/replace faulty electrical components of machines such as starters, relays, switches, motors, and position sensing devices such as magnetic sensors and Proximity switches.8. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards, relays and fuses.9. Must complete assigned preventive maintenance tasks safely and efficiently.10. Replaces low voltage, 110v, 220v and 480v electric motor components as needed.11. Effectively and aesthetically plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings.12. Diagnoses and replaces faulty mechanical, hydraulic, and pneumatic components of machines and equipment.13. Work unscheduled hours as needed to accommodate Company’s need to achieve customer demand.14. Required to assist with general plant repairs and mechanical maintenance repairs as needed. Working knowledge of bearings, motors, etc…15. Will work 2nd or 3rd shift hoursQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.· Must have basic computer skills, advanced Motor Controls experience and knowledgeable with Variable Frequency drives.· Working knowledge of the National Electric Code and be able to read and interpret electrical schematics and wiring diagrams.· Must be able to demonstrate proficient use of all electrical meters and monitoring equipment.· Must be familiar with OSHA Electrical Safety requirements such as, but not limited to, NFPA 70E and Arc Flash Hazards and personal protective equipment.

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role The Safety Supervisor will be responsible for overseeing and ensuring the implementation of safety protocols and procedures within the local organization. Their primary goal is to create a safe working environment for employees and minimize the risk of accidents, injuries, and occupational hazards. The Safety Supervisor will report to the HQ Environmental Health and Safety Manager in leading the safety and health efforts within the company, by supporting the implementation and evaluation of critical safety processes, programs, and procedures to achieve goals, objectives, and continuous improvement related to compliance and injury reduction. Responsibilities • Monitor and maintain compliance with federal & state OSHA, EPA, NFPA, ANSI and other federal and state entity requirements, • Provide relevant content and subject matter expertise to support: required safety-related training; effective implementation of safety programs; and prevention of accidents, • Support site safety goals through implementation of safe work practices and coaching of employees and supervisors in safe practices, • Work in a team environment where responsibility for injury/illness prevention, compliance assurance, safety auditing, incident investigation, and employee training are shared between the leadership team and the EHS supervisor, • Work with the management team and employees to instill a genuine culture of safety awareness and personal responsibility for safe behaviors and work practices, • Assist with employee engagement efforts, including oversight of safety committees, • Provide direct support to employees within the site, with the ability to perform work activities in a variety of industrial and warehouse settings/environments, requiring activities such as, but not limited to: climbing ladders and stairs, walking and standing for long periods of time, working occasionally in hot and cold environments; and wearing advanced PPE such as fall protection and respirators and added clothing, • Daily job includes: Enforcing safety policies; Conducting risk assessments; Training and educating employees; Inspecting, auditing, and monitoring safety practices; Investigating accidents and incidents; Maintaining safety records and documentation; Collaborating with local management; Staying updated on safety regulations and best practices Qualifications • Minimum of 3 years of progressive experience in an environmental health and safety role, • Associate degree in Occupational Safety, Environmental Health and Safety, Industrial Safety, or related field, • Current OSHA 10-Hour General Industry or Construction certification, • Advanced proficiency with Microsoft Office Suite, including Excel (data analysis, pivot tables, formulas), PowerPoint (presentations, training materials), and Word (documentation, reports), • Experience and/or familiarity with related governing agency requirements (i.e., OSHA, NFPA, EPA, DOT), • Demonstrated communicating, training, public speaking and problem-solving skills, • Experience and/or familiarity with powered industrial truck driving (i.e., Forklift, Order-picker, Reach Truck, Electric Pallet Jack), • Experience supporting a Process Safety Management Program, • Knowledge of environmental regulations including but not limited to air, wastewater, storm water, solid and waste management Preferred Qualifications • Bachelor's degree in Environmental Health and Safety, Occupational Safety and Health, Industrial Hygiene, or related field, • Working knowledge of Anhydrous Ammonia refrigeration systems and associated safety protocols Benefits • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • Monthly Weee! Points credits Compensation Range • The US base salary range for this full-time position is $77,000 - $91,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at applicantaccommodation@sayweee.com. For more jobs and to find out more about Weee!, visit our career page: https://about.sayweee.com/careers Softbank Vision Funds California Employee Privacy Policy Intro/FAQ 3.19.2026 Weee! Privacy Policy for California Employees Applicants Contractors (March 2026)

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Qualifications are a guide, not a checklist. If you think you can make an impact here, we want to hear your story! JOB SUMMARY The Outside Sales Representative (OSR) is responsible for profitably growing Atlantic Plywood's sales through disciplined territory management, strategic selling, and a relentless focus on delivering customer value. OSRs serve as business consultants, building demand for APC's core and new products, expanding market share, defending existing business, and contributing to APC’s position as the best, most professionally run sales organization in our industry. The OSR must consistently meet or exceed sales and profit goals, leverage Salesforce to drive and document all customer interactions and opportunities, and actively contribute to business initiatives. This is a field-based role requiring extensive customer-facing activity and effective self-management. A motor vehicle record (MVR) check will be conducted, and an acceptable record will be required. KEY RESPONSIBILITIES Sales Growth and Profitability: • Meet or exceed annual Sales and Profit Plans., • Exceed assigned Business Unit (BU) sales performance targets., • Create and close new sales opportunities in both existing and new accounts., • Drive demand for new products through education, presentation, and pipeline development., • Execute Focus Product Sales Goals. Customer Relationship Management: • Maintain and grow a portfolio of active customers while identifying and onboarding at least 20 new accounts per year (mix of DOA or New Credit App Accounts)., • Consistently solidify existing relationships and create new relationships with decision-makers and influencers., • Execute strategic, productive sales calls with clear objectives aligned to account growth and opportunity development. CRM, Sales Activity, and Territory Management: • Record all sales activities, customer interactions, follow-ups, and sales calls in Salesforce daily without exception., • Create and manage Sales Opportunities within Salesforce as directed., • Use Salesforce dashboards and reports to forecast, manage pipeline health, and prioritize customer engagement., • Pre-plan a minimum of 10 targeted sales calls per day., • Conduct monthly strategic ride-alongs with a Sales Manager, Product Manager, and Vendor Representatives., • Execute full, pre-planned sales days and meet or exceed BU expectations for calls per day., • Build and manage a healthy pipeline, focusing on identifying and progressing growth opportunities., • Defend and grow existing business through smart territory allocation and time management. Collaboration and Internal Engagement: • Partner effectively with Product Managers, Vendor Representatives, and Demand Creation Teams., • Participate fully in company-driven initiatives and training programs., • Support cross-selling and cross-support efforts across Parksite business units., • Actively engage with management on market intelligence, competitive insights, and product opportunities. Performance Expectations: • Consistently execute a structured, disciplined sales approach focused on growth, profitability, and professionalism., • Build and maintain a robust sales pipeline, aligned to forecast goals and territory objectives., • Deliver professional, value-based sales presentations that differentiate APC in the marketplace., • Defend and grow business efficiently, allocating time wisely between offense (growth) and defense (retention). MINIMUM QUALIFICATIONS • High School diploma or GED required; Bachelor's degree in Business, Sales, Marketing, or related field preferred., • 2+ years of proven success in an outside B2B sales environment, preferably within building materials, industrial sales, or a related industry., • Demonstrated CRM discipline (Salesforce strongly preferred)., • Excellent communication, negotiation, and time management skills., • Valid driver’s license with an acceptable Motor Vehicle Record (MVR)., • Willingness and ability to travel extensively within the assigned territory. Benefit Package Includes: • Paid Time Off, • Medical, Dental, & Vision Insurance, • Life Insurance, AD&D, • Short & Long Term Disability, • Employee Stock Ownership Plan (ESOP), • 401(k) with Company Match #Atlanticplywoodhiring

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Title: Supply Chain Management Data Analyst Location: Teaneck, NJ Fluent in both Korean and English Position Summary: Hanwha Vision America (HVA) is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals including retail, transportation, education, banking, healthcare, hospitality and airports. Hanwha Vision America is seeking a Supply Chain Management Data Analyst who will be is responsible for analyzing, monitoring, and optimizing supply chain operations to improve service levels, inventory management, forecasting accuracy, and overall operational efficiency. This role supports demand planning, inventory analysis, S&OP, logistics cost review, operational reporting, and cross-functional decision-making. The SCM Data Analyst will work closely with Sales, Procurement, Logistics, Operations, Finance, U.S.-based teams, and Korea-based headquarters teams to support supply chain planning, procurement coordination, inventory management, and operational reporting across global business functions. The ideal candidate will have strong analytical skills, attention to detail, bilingual communication ability in Korean and English, and the ability to translate complex data into actionable business insights. Responsibilities: Supply Chain Planning & Analysis • Support weekly and monthly rolling forecast processes by consolidating demand signals, identifying supply chain risks, and providing actionable insights to internal stakeholders., • Analyze supply chain performance metrics, including demand forecasts, order fulfillment, inventory levels, lead times, backorders, and supplier performance., • Identify trends, risks, and opportunities to improve service levels, inventory utilization, and operational efficiency., • Conduct root cause analyses for supply chain disruptions and provide recommendations to improve planning performance., • Communicate key findings, risks, and recommendations clearly to management and cross-functional teams. Inventory Management • Monitor inventory by reviewing sell-in, sell-out, open orders, inventory coverage, remaining inventory months, and consumption trends., • Analyze inventory turnover, inventory days on hand, aging inventory, excess and obsolete stock, and replenishment requirements., • Recommend actions to optimize stock availability while minimizing excess inventory and carrying costs., • Collaborate with Procurement, Warehouse, Logistics, and Sales teams to maintain inventory accuracy and availability. Logistics Cost Optimization • Analyze freight spend and identify opportunities to reduce transportation costs while maintaining service levels., • Evaluate and recommend transportation modes based on cost, lead time, inventory availability, and customer requirements. Demand Forecasting • Develop, review, and maintain item-level demand forecasts using distributor purchase order history, open orders, POS data, channel inventory, and market insights from the Sales team., • Analyze demand fluctuations, forecast accuracy, sales trends, inventory levels, backorders, and excess inventory risks to support data-driven decision-making by senior management., • Monitor forecast accuracy, demand variability, forecast bias, and baseline forecast models such as moving average, trimmed average, and historical trend analysis., • Support weekly and monthly forecasting reviews with cross-functional stakeholders., • Partner with third-party machine learning forecast providers to support forecast improvement initiatives and evaluate forecast outputs against historical demand, POS, channel inventory, and statistical baseline models. Reporting & Process Improvement • Extract, organize, analyze, and present supply chain data using SAP, Excel, Power BI, and other analytical tools., • Prepare recurring and ad hoc reports for management and key stakeholders., • Develop, maintain, and improve supply chain reports, dashboards, and key performance indicators., • Participate in continuous improvement initiatives focused on process efficiency, automation, reporting accuracy, and cost reduction., • Assist with reporting enhancements, and data integrity initiatives. Qualifications: • Bachelor's degree in Supply Chain Management, Business Administration, Operations Management, Industrial Engineering, Finance, Economics, or a related field., • 2-5 years of experience in supply chain, operations, logistics, inventory planning, procurement, or data analytics., • Experience working with ERP systems such as SAP, Oracle NetSuite, Microsoft Dynamics 365, or similar platforms preferred., • Experience in the electronics, technology, security, or surveillance industry is preferred, with familiarity in global supply chain operations and inventory planning considered a strong advantage., • Advanced proficiency in Microsoft Excel, including Pivot Tables, VLOOKUP/XLOOKUP, Power Query, and data analysis., • Experience with business intelligence and reporting tools such as Microsoft Power BI or Tableau., • Strong analytical and quantitative problem-solving abilities., • Understanding of supply chain processes, inventory planning, forecasting, procurement, and logistics., • Experience with ERP systems and supply chain reporting tools., • Fluent in both Korean and English. Preferred Qualifications: • Professional certification such as Certified Supply Chain Professional (CSCP) or Certified in Planning and Inventory Management (CPIM) from ASCM., • Experience with SQL, database management, or advanced analytics tools., • Knowledge of demand planning and forecasting software., • Experience supporting global supply chain operations and international supplier relationships. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required. All personnel may be required to perform duties outside their normal responsibilities from time to time as needed.

Job Description Vivo HealthStaff Inc. is recruiting for a Family Medicine Physician in Fairfield, NJ. This is a locum position with competitive pay and travel reimbursement. Job Details: Practice Setting: Private Practice Reason for Coverage: Provider on leave Dates of Coverage: ASAP - January 25th Average Number of Patients Per Day: 20-30 Number of Physicians in Practice: 2 Will the Locum be Responsible for Supervising Other Health Care Providers? No Services Available On-Site: Laboratory, Radiology Documentation System/EMR: AthenaHealth Practice Population: Adult, Geriatric Required General Procedures: EKG Interpretation Required Surgical Procedures: Incision & Drainage (I&D), Suturing of Minor Lacerations Required Occupational Medicine Procedures: Employment Physicals, Diagnosis & Management of Common Industrial-Related Medical Problems, Disability Exams Pay and Benefits: • $155 - $170 per Hour (Mileage reimbursement included) Malpractice Insurance: Coverage provided Requirements: Board Certified in Internal Medicine/Family Medicine - Required Local providers only (mileage will be reimbursed) - Required NJ license in hand - Required Internal credentialing must be completed with the submitting agency - Required Clean background - Highly preferred BLS certification - Required AthenaHealth experience - Highly preferred Recent outpatient experience in NJ - Highly preferred Credentialed with BCBS - Required About Us: Vivo HealthStaff Inc. is a healthcare staffing company based in the San Francisco Bay Area, providing clinical recruitment and staffing services to healthcare organizations across the United States.

Job Description Company overview: Diversified Heat Transfer (DHT) is a leading engineering and manufacturing company of heat exchange equipment and systems for the residential, commercial, and industrial markets. With more than 80 years of experience, DHT designs, builds, and manufactures innovative, technology-driven products that provide flexible, high-quality, and cost-effective solutions for a wide variety of applications. Our continued growth and success means we’re always on the lookout for talented individuals to join our team. At DHT, we are committed to fostering a culturally diverse workforce where every individual is valued and respected. We believe that diversity drives innovation and creativity, and we are proud to be an equal opportunity employer. Position Overview: The Designer will collaborate with a cross-functional team to innovate and enhance our product line through the application of new technologies and design strategies. This role is pivotal in driving value by addressing customer and market needs and identifying effective approaches for product improvements and cost reductions. The Designer will support the design process for products, ensuring that all designs meet customer specifications, including design, functionality, material, and testing requirements, while adhering to established cost targets. Responsibilities: • Apply advanced design techniques and technologies to create innovative solutions and optimize product performance., • Prepare manufacturing drawings, documentation packages and specifications., • Research design options and perform experiments to determine feasibility, • Update and maintain history documentation., • Prepare bills of materials and costing., • Instrumental member of the ECO process and execution of enhancing existing product designs and engineering documentation, • Support in the creation of solid works 3D and 2D drawings for product offerings., • Ability to have a clear understanding of the department’s processes of building products (standard and customized)., • Participate in team meetings, create and maintain project timelines and action items through implementation. Qualifications: • Two year technology degree or equivalent with 5+ years of experience in Drafting/Design using Solid Works, • Proficiency in Solid Works is required., • Experience with PDM or similar Data Management systems is beneficial., • Experience/Knowledge of Design for manufacturing principles, • Excellent computer skills (MS Word, Excel, Outlook, ERP)., • Comfortable working with hand tools., • Product design experience., • Comfortable working in a fast-paced environment., • Knowledge of mechanical, electromechanical, hydraulic controls, machining operations, welding, and brazing., • Solid analytical skills are required., • Must work precisely, accurately, and with close attention to all details., • Strong organizational skills, with the ability to prioritize and manage multiple tasks simultaneously.

Job DescriptionJob Title: Manufacturing / Integration Engineer II Job Description The Manufacturing / Integration Engineer II supports the engineering and development activities of new and existing products, with a strong focus on manufacturing processes, process validation, and design for manufacturability. This role works across the full product lifecycle, from initial concept and prototyping through scale-up, validation, and transfer to full manufacturing, while collaborating closely with cross-functional teams and external customers. Responsibilities • Support new product launches from initial concept through completion, including prototyping, testing, and transfer of processes to manufacturing., • Develop and maintain detailed project timelines for new product introductions and ensure project tasks are completed through launch., • Create and execute Master Validation Plans and Validation Protocols/Batch Records for new and existing products., • Independently troubleshoot and resolve technical issues encountered during prototyping, scale-up, and manufacturing activities., • Prepare Bills of Materials for new product lines and processes, collaborating with production, quality control, and ERP teams to develop cost of goods estimates., • Write, revise, and maintain batch records and standard operating procedures to support new product introductions and process changes., • Work closely with cross-functional teams such as R&D, Quality, Manufacturing, and Regulatory to make data-driven decisions that align projects with business goals., • Drive scale-up and process optimization initiatives for existing products to improve performance, robustness, and efficiency., • Ensure business continuity by providing prompt investigation and resolution of process performance drifts and supporting CAPA activities., • Apply structured problem-solving methods, including root cause investigations, to address process and product issues., • Support and, when appropriate, lead various special projects and ad hoc assignments related to process development, validation, and improvement., • Engage with customers in a professional and collaborative manner to understand requirements, communicate technical information, and support successful product integration.Essential Skills, • B.S. degree in Chemical Engineering, Mechanical Engineering, Industrial Engineering, or Biomedical Engineering., • 3–5 years of experience in an engineering role, preferably in development, manufacturing engineering, or process engineering., • Hands-on experience with process validation, including developing and executing validation protocols and batch records., • Experience in process development and process optimization, with the ability to translate pilot or lab-scale processes into robust, manufacturable processes., • Fundamental understanding of manufacturing processes and manufacturing process improvement., • Strong communication skills, including the ability to clearly convey technical information verbally, in writing, and in person to stakeholders at various levels., • Demonstrated ability to execute project deliverables according to schedule and manage multiple tasks in a dynamic environment., • Proven ability to work effectively within a team environment and build productive relationships with cross-functional partners such as R&D, Quality, Manufacturing, and Regulatory., • Experience with structured problem-solving, including issue resolution, root cause investigations, and CAPA activities., • Proficiency in Microsoft Word, Excel, and PowerPoint., • Customer-facing communication skills and professionalism suitable for representing engineering and manufacturing capabilities to external stakeholders.Additional Skills & Qualifications, • Experience in the medical device or similar regulated manufacturing environment., • Background in development, manufacturing engineering, process improvement, and process engineering., • Familiarity with process engineering tools and methodologies for scale-up and process optimization., • Experience with Minitab or other statistical analysis software., • Experience with SolidWorks or similar CAD tools., • Experience with Microsoft Project or other project management software., • Ability to make data-driven decisions and present findings and recommendations to cross-functional teams., • High degree of professionalism, maturity, and ownership over assigned projects and responsibilities., • Comfort working in a fast-paced environment with a constant level of activity and diverse project work.Work Environment You will work on-site as part of a growing engineering team of approximately 9–10 engineers, collaborating closely with an Associate Integration Engineer while also working independently on assigned projects. The role follows a standard daytime schedule of approximately 8:30 a.m. to 5:00 p.m. You may need to travel to New York City 1–2 times per week during the first two months to support integration and collaboration activities. The environment offers a steady flow of diverse projects, opportunities to lead initiatives, and the chance to grow your responsibilities as the engineering team and capabilities expand. The company provides comprehensive benefits, including medical coverage starting on the first day of employment, a 401(k) plan with employer contributions, and frequent employee activities that support a collaborative and engaging culture. The work setting is professional and engineering-focused, with regular interaction across production, quality control, ERP, R&D, Quality, Manufacturing, and Regulatory functions. Job Type & Location This is a Contract position based out of Allendale, NJ. Pay and Benefits The pay range for this position is $48.08 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Allendale,NJ. Application Deadline This position is anticipated to close on Jul 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: Overview A Building Automation Sales Representative is responsible for promoting and selling building automation systems and solutions to commercial, industrial, and institutional clients. They work closely with clients to understand their needs, provide tailored solutions, and ensure customer satisfaction. This role involves a combination of technical knowledge, sales skills, and customer relationship management. Key Responsibilities: Sales and Business Development: • Identify and target potential clients in the commercial, industrial, pharmaceutical and institutional sectors., • Develop and maintain relationships with key decision-makers and stakeholders., • Partner with engineering firms to be the controls provider of choice., • Conduct market research to identify new business opportunities and stay updated on industry trends. Technical Consultation: • Understand clients' building automation needs and provide customized solutions., • Incorporate energy saving solutions with our delivery., • Collaborate with engineering and technical teams to design and propose appropriate systems., • Conduct product demonstrations and presentations to showcase the benefits of building automation solutions. Customer Relationship Management: • Manage the entire sales process from lead generation to closing deals., • Provide ongoing support and follow-up to ensure customer satisfaction and retention., • Address customer inquiries, concerns, and feedback promptly and professionally. Sales Reporting and Documentation: • Maintain accurate records of sales activities, customer interactions, and project details using Sales Force., • Prepare and submit sales reports, forecasts, and other documentation as required., • Monitor and report on sales performance and progress towards targets. Work Environment: • This role typically involves a combination of office work and field visits to client sites., • Travel may be required to meet with clients and attend industry events or conferences. We offer a competitive benefits package including: • PTO, • 401(k) Matching, • 9 Paid Holidays, • Bonus Plan, • Company truck/fuel card, • Employee Referral program, • 8-hour Shift, overtime available, • EAP/Wellness Program, • Health/Dental/Vision Insurance, • Trainings If you are a self-motivated individual with a passion for providing exceptional HVAC services, we encourage you to apply for this position. Come join a winning team while working for a company with whom you can retire from! Requirements: Qualifications: • Bachelor's degree in Business, Engineering, or a 10 years of job experience., • Proven experience in sales, preferably in building automation or a related industry., • Strong technical knowledge of building automation systems and solutions., • Excellent communication, negotiation, and presentation skills., • Ability to work independently and as part of a team., • Proficiency in Microsoft Office Suite. Skills and Competencies: • Technical Aptitude: Understanding of building automation technologies and their applications., • Sales Skills: Ability to identify opportunities, develop strategies, and close deals., • Customer Focus: Commitment to providing excellent customer service and building long-term relationships., • Problem-Solving: Ability to analyze client needs and propose effective solutions., • Time Management: Efficiently manage multiple tasks and prioritize workload.

Job DescriptionInside Sales Representative Location: Massachusetts, Maine, or New Jersey (based out of any Hayes Pump office) Schedule: Monday–Friday, 8:00 AM – 5:00 PM Employment Type: Full-Time Classification: Exempt Compensation: $55,000 – $70,000 annually, commensurate with experience About Hayes Pump Founded in 1898, Hayes Pump is New England's oldest and largest pump distributor. We provide industry-leading pumping equipment, parts, service, and engineered solutions across a wide range of industrial and municipal applications. As a trusted distributor for premier manufacturers including Goulds, Viking, Gorman-Rupp, Aurora, and Fairbanks, Hayes Pump has built a reputation for technical expertise, exceptional customer service, and long-term customer relationships. We are seeking a motivated and customer-focused Inside Sales Representative to join our growing team. This role is ideal for someone who enjoys solving customer challenges, working in a technical sales environment, and building strong relationships with customers, vendors, and internal teams. Position Summary The Inside Sales Representative serves as a primary point of contact for customers, providing sales support, product recommendations, pricing, and order management for pumping equipment and replacement parts. This individual will leverage product knowledge and strong communication skills to deliver exceptional customer service while identifying opportunities to support customer needs and drive business growth. Key Responsibilities Provide timely and accurate quotations for pumps, replacement equipment, and related parts. Assist customers with product selection, sourcing, pricing, and technical inquiries. Process customer orders and ensure accurate entry into company systems. Coordinate with vendors and manufacturers to obtain pricing, availability, and lead times. Expedite orders and proactively communicate order status updates to customers. Utilize company software systems to organize workflow, manage priorities, and maintain customer information. Develop and maintain strong relationships with customers, vendors, and internal teams. Deliver exceptional customer service through responsiveness, product knowledge, and problem-solving. Identify potential sales opportunities within existing accounts and communicate growth opportunities to management. Collaborate with peers and cross-functional teams to support company objectives and customer success. QualificationsRequired High school diploma or GED. 3–5 years of customer service, inside sales, technical sales, or related experience. Strong verbal and written communication skills. Excellent organizational and time-management abilities. Proficiency with Microsoft Office applications. Experience working with Adobe Acrobat/PDF tools. Strong attention to detail and commitment to accuracy. Reliable attendance and professional work ethic. Ability to work independently while contributing to a collaborative team environment. Preferred Experience in industrial distribution, pumps, rotating equipment, fluid handling systems, or related industries. Experience reading technical specifications, equipment documentation, or engineering drawings. ERP, CRM, or order management system experience. What We Offer At Hayes Pump, we invest in our employees and provide opportunities for long-term career growth. Benefits Include: Competitive salary Performance-based bonus program Comprehensive medical, dental, and vision coverage 401(k) with company match Paid training and professional development Direct vendor training and mentorship from experienced engineers Casual and supportive work environment Strong emphasis on work-life balance Career advancement opportunities within a growing organization Hayes Pump is an Equal Opportunity Employer and values diversity in the workplace. We encourage qualified candidates from all backgrounds to apply.

Job Description Construction Estimator - Commercial Construction - Base Salary to 130k/year - Carlstadt, NJ • Our client is a well-established international provider of commercial and industrial access solutions serving customers across the commercial construction, industrial, manufacturing, power, infrastructure, and maintenance markets. They are seeking an experienced Construction Estimator to join their New Jersey team. This position is ideal for an estimator who understands scaffold and access systems, can independently perform site walks, review construction documents, develop accurate estimates, and support projects throughout the New York and New Jersey markets., • This is a hybrid position combining office, field, and customer site responsibilities. Responsibilities: • Prepare detailed cost estimates, proposals, and bid packages for commercial and industrial construction projects., • Review construction drawings, specifications, bid documents, and project requirements to develop accurate scopes of work., • Perform project site visits throughout New York and New Jersey to evaluate site conditions, identify access requirements, and gather estimating information., • Develop estimates for scaffolding, temporary access systems, suspended scaffolding, shoring, forming, specialty contracting services, and related construction support solutions., • Collaborate with operations, engineering, sales, project management, and field personnel to develop practical and competitive project solutions., • Manage estimate revisions, change orders, scope modifications, and customer requests throughout the bidding process., • Identify pricing risks, constructability concerns, and scope gaps prior to project award., • Utilize Bluebeam, Salesforce, Microsoft Office, and construction estimating software to prepare, organize, and manage project estimates., • Support projects ranging from small service work and maintenance projects to large commercial and industrial construction opportunities., • Maintain strong relationships with general contractors, construction managers, subcontractors, project managers, and customers., • Support estimating efforts while maintaining schedule accuracy, project profitability, and customer responsiveness. Qualifications: • 3+ years of construction estimating experience., • Experience estimating scaffolding, access systems, suspended scaffolding, shoring, forming, industrial services, specialty contracting, or closely related construction scopes., • Experience supporting commercial or industrial construction projects., • Ability to independently perform site walks and evaluate project conditions., • Ability to read and interpret construction drawings, specifications, bid documents, and project plans., • Experience developing project estimates, managing estimate revisions, and supporting change orders., • Proficiency with Bluebeam, Microsoft Office, and construction estimating software., • Strong communication skills with the ability to collaborate effectively with contractors, project managers, field personnel, engineers, and customers., • Knowledge of the New York and New Jersey commercial construction market., • Ability to travel to project sites throughout New York and New Jersey. Compensation: • Base salary in the 115k - 130k/year range plus bonus, • Car allowance, • Medical, Dental, Vision, Life, and Disability Insurance beginning on Day 1, • 401k with immediate vesting and company match, • Paid vacation and holidays, • Hybrid work environment with office and field responsibilities #INDALL

Job Description For decades, Dempsey Uniform & Linen Supply has been committed to delivering exceptional uniform, linen, and facility service solutions to healthcare, hospitality, industrial, and commercial customers throughout the Mid-Atlantic region. Our success is built on a culture of service, reliability, operational excellence, and a commitment to the safety and well-being of our employees. As we continue to grow, we are seeking a highly motivated and experienced Corporate EHS Manager to lead and strengthen our environmental, health, safety, and compliance programs across all company locations. Position Summary The Corporate EHS Manager is responsible for developing, implementing, and sustaining a comprehensive Environmental, Health & Safety program across all Dempsey facilities. This role provides strategic leadership and hands-on oversight of EHS compliance and safety culture for industrial laundry operations, maintenance functions, warehouses, distribution centers, and commercial vehicle fleets. The Corporate EHS Manager will partner closely with plant leadership, engineering, maintenance, transportation, and operations teams to create a proactive safety culture that protects employees, ensures regulatory compliance, supports operational excellence, and advances Dempsey’s commitment to quality and customer service. Key ResponsibilitiesCorporate EHS Leadership & Compliance • Develop, implement, and continuously improve a standardized corporate EHS management system across all Dempsey facilities., • Serve as the primary company representative for OSHA, EPA, DOT, local environmental agencies, and regulatory inspections., • Conduct facility audits, compliance inspections, hazard assessments, and risk evaluations while ensuring timely corrective action completion., • Establish and monitor leading and lagging safety indicators, providing monthly executive-level reporting and recommendations., • Manage environmental permitting, regulatory reporting, hazardous waste management, wastewater compliance, and environmental stewardship initiatives., • Develop, maintain, and test company-wide Disaster Recovery Plans (DRP), emergency response procedures, crisis communications, and business continuity protocols.Healthcare Laundry & Accreditation Compliance, • Lead and support compliance initiatives associated with Healthcare Laundry Accreditation Council (HLAC) standards and Hygienically Clean certification requirements., • Partner with Operations and Quality teams to ensure facilities maintain accreditation standards related to employee safety, infection prevention, quality assurance, and operational controls., • Support audit readiness and corrective action implementation associated with accreditation reviews.Production & Laundry Operations Safety, • Partner with plant leadership to identify and mitigate risks associated with industrial laundry processing, automated material handling systems, conveyors, finishing equipment, tunnel washers, dryers, boilers, and chemical dispensing systems., • Develop and maintain Job Hazard Analyses (JHAs), Safe Work Procedures (SWPs), and risk assessments for production operations., • Oversee Lockout/Tagout (LOTO), machine guarding, ergonomics, chemical handling, and noise exposure programs., • Lead Management of Change (MOC) reviews and Pre-Startup Safety Reviews (PSSR) for new equipment, facility expansions, and process modifications., • Drive employee engagement through near-miss reporting, behavioral-based safety programs, and continuous improvement initiatives.Maintenance & Engineering Safety, • Ensure compliance with OSHA standards governing electrical safety, confined space entry, fall protection, hot work, machine safeguarding, and contractor management., • Administer Bloodborne Pathogen (BBP) training and exposure control plans where applicable., • Review contractor safety plans and oversee contractor onboarding and compliance activities., • Collaborate with Engineering and Maintenance teams to integrate safety requirements into preventive and predictive maintenance programs., • Oversee life-safety inspections and compliance programs for fire suppression systems, emergency eyewash stations, emergency lighting, boilers, pressure vessels, and related infrastructure.Fleet Safety & Transportation Compliance, • Develop and manage a comprehensive fleet safety program covering route service representatives, delivery drivers, transportation personnel, and company-owned vehicles., • Administer driver qualification programs, MVR review processes, defensive driving training, and driver coaching initiatives., • Ensure compliance with applicable FMCSA and DOT regulations including:, • Driver Qualification Files, • Drug & Alcohol Testing Programs, • Electronic Logging Device (ELD) Requirements, • Driver Vehicle Inspection Reports (DVIRs), • Hours of Service Compliance, • Investigate vehicle accidents and near-misses while utilizing telematics and camera systems to identify coaching opportunities and reduce risk.Training & Safety Culture, • Design, implement, and maintain company-wide EHS training programs., • Lead OSHA compliance training initiatives including:, • OSHA 10/30, • Hazard Communication (GHS), • Lockout/Tagout, • Forklift Safety, • Confined Space Entry, • Fall Protection, • First Aid/CPR/AED, • Emergency Response Procedures, • Develop onboarding safety orientation programs for all new employees., • Lead safety committees and mentor site-level safety champions throughout the organization., • Promote a culture where safety is recognized as a core value and business priority.Incident Management & Regulatory Reporting, • Manage company-wide incident reporting, investigation, and recordkeeping systems., • Maintain OSHA 300 and 300A logs and ensure compliance with all reporting requirements., • Conduct root cause investigations utilizing methodologies such as 5-Why Analysis, SCAT, and Fault Tree Analysis., • Partner with Human Resources to manage workers’ compensation claims, return-to-work programs, and injury prevention initiatives., • Prepare and submit OSHA, EPA, DOT, Tier II, wastewater, and state regulatory reports accurately and on time.QualificationsEducation & Certifications Required • Bachelor’s degree in Occupational Safety, Environmental Science, Engineering, Industrial Hygiene, or a related field., • OSHA 30-Hour General Industry certification. Preferred • Certified Safety Professional (CSP), • Associate Safety Professional (ASP), • Certified Industrial Hygienist (CIH), • OSHA 510 or OSHA 511 certification, • DOT/FMCSA compliance certification, • First Aid/CPR Instructor certificationExperience, • 7-10 years of progressive EHS leadership experience in manufacturing, industrial laundry, textiles, distribution, logistics, or multi-site operations., • Experience managing fleet safety programs and DOT compliance., • Demonstrated success improving safety performance and reducing incident rates., • Experience leading OSHA, EPA, and DOT inspections and audits., • Prior experience supporting healthcare laundry accreditation standards is highly desirable.Knowledge, Skills & AbilitiesTravel: Up to 40% (multi-site travel required) Location: Corporate oversight of all Dempsey Uniform & Linen Supply facilities • Strong working knowledge of OSHA, EPA, FMCSA, DOT, and state regulatory requirements., • Understanding of industrial laundry operations, chemical handling systems, steam generation equipment, and production safety programs preferred., • Excellent analytical, organizational, communication, and leadership skills., • Ability to influence and engage employees at all levels of the organization., • Experience using EHS management software and Microsoft Office applications., • Valid driver’s license with an acceptable driving record.Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionQuality Control Analytical Associate IIAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT & Human Resources disciplines in New Jersey. The Quality Control Analytical Associate II serves as a support role to clinical and commercial production. The QC Analytical Associate II will assist with process check point, stability, and release analytical testing to ensure that quality standards are upheld for all products produced at the facility. Under the direction of the Manager, QC Analytical Associate II, responsibilities include: • Performs the accurate execution of all company and/or client test methods and procedures of cellular products to ensure the safety and/or efficacy of different cell populations, • Performs maintenance, monitoring, and troubleshooting of pertinent equipment, • Performs and assists in the training of other Quality Control technicians, • Maintains training records and coordinates records retention with Document Control and Training groups, • Tests, documents, and reports results for products or materials following company and/or client procedures following CGMP and/or GTP guidelines, • Performs state proficiency testing and/or client proficiency testing under direct supervision as applicable, • Participates in managing QC materials and supplies, • Performs and assists in equipment and method qualification/validation activities as needed, • Performs reagent and media preparation, • Provides input based on level of knowledge and experience with troubleshooting malfunctioning equipment, • Investigates out-of-specification, out-of-trend, aberrant, and/or non-conforming test results, • Initiates, investigates, and prepares deviation reports with input from assigned supervisor, • Brainstorms and implements corrective and preventive actions, as and when applicable, • Documents training and execution of shipping test samples to contract laboratories for testing, • Completes all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP), • Communicates effectively with other co-workers, departments, management and clients, • Eventually serves as a lead and/or co-lead for client projects, • Additional tasks as assignedREQUIREMENTS, • BA/BS in a science or relevant field required, • Prior cGMP experience required, • Prior QC laboratory, clinical laboratory, microbiology, hematology, blood banking, or immunology experience in a CGMP/GTP environment preferred, • Prior industrial experience in cell count methodologies preferred, • Prior academic and/or industrial cell therapeutic experience preferred, • Minimum 2-5 years of experience in Quality Control laboratory setting or within the biopharmaceutical industry, • Proficient with computer software such as: Microsoft Office, Visio, • Strong written and oral communication skills, • Strong presentational skills preferred, • Candidate must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities.Other Information, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy. Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Must be able to handle the standard/moderate noise of the manufacturing facility, • The QC Analytical Associate II must be able to work in a laboratory environment for an extended period., • Must be physically capable to stand; walk; sit; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hearPlease note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. QC Analytical Associate I is available as well.

Job Description General Purpose The role of an Environmental Health and Safety (EHS) Manager is essential for maintaining and enhancing safety, health, and environmental standards within an organization. This position involves learning and applying existing HYTORC policies and programs; identifying gaps; and proactively resolving issues by developing, implementing, and overseeing new and existing policies and programs that ensure a safe workplace and compliance with applicable regulations. The EHS Manager collaborates with various departments to mitigate risks, ensure employees are properly trained, and implement effective corrective measures, all while promoting a culture of safety and environmental responsibility. The objective is to ensure that HYTORC locations comply with HYTORC EHS policies & programs aligned to local, state, federal & global regulations for environmental, health, and safety issues affecting our associates, buildings, products, and the land and water we impact. Essential Duties and Responsibilities Program Development: • Design and implement EHS policies, procedures, and training programs., • Monitor and assess relevant policies from governing bodies (federal, state, municipal, global) and individual sites that impact company operations., • Analyze compliance requirements and integrate them efficiently into company procedures and policies., • Monitor company operations for adherence to established policies and procedures. Auditing & Inspection: • Conduct regular safety audits and workplace inspections to identify and correct hazards., • Maintain thorough records of compliance reviews for audit purposes and regulatory reference. Reporting: • Manage regulatory reporting and permit applications/renewals., • Conduct EHS pre-qualification assessments and audits for contractors and suppliers., • Review and complete EHS customer forms and surveys to ensure regulatory alignment., • Manage sustainability programs and initiatives for all applicable corporate locations where the company operates., • Oversee PFAS reporting to ensure environmental complian Incident Management: • Investigate accidents, injuries, and illnesses, and implement effective corrective actions., • Lead and oversee the company-wide Safety Committee program., • Coach supervisors and managers once., • Responsible for OSHA/EMR tracking and reporting, analyze trends, and develop corrective actions for improvements. EHS initiatives, programs and regulatory practices to ensure proper compliance in operations. Training: • Ensure essential safety, health, and environmental training is provided to employees and supervisors in an effective manner., • Ensure appropriate safety and health, accident prevention, and investigation training is provided for employees, managers and supervisors in an effective manner., • Ensure all safety-related training records are recorded in the company Learning Management System (LMS). Risk Management: • Identify, assess, and mitigate workplace risks and environmental hazards., • Conduct proper investigations, root cause analysis on safety incidents and develop corrective action to mitigate reoccurrences., • Establish a program for data collection, analysis, & reporting on Carbon Emissions. Supervisory Responsibilities N/A Education/Experience Required • Bachelor’s degree in environmental science, Occupational Health & Safety, Industrial Hygiene, or a related field., • 10+ years of experience in EHS compliance, safety program management, or sustainability initiatives for a multi-national corporation., • Strong knowledge of OSHA, EPA, 3rd-party compliance portals, and industry-specific safety regulations., • Experience with HSE audits, training programs, and risk assessments., • Certifications in Associate Safety Professional (ASP) from the Board of Certified Safety Professionals (BCSP), OSHA (General Industry)., • In-person training delivery (classroom) experience a plus., • Experience leading, implementing, and standardizing organizational EHS programs across multiple operating locations (in person and virtual)., • Proven ability to assess corporate EHS requirements, perform gap analyses against internal policies, and provide strategic recommendations to support compliance, risk mitigation, and effective customer relationship management. Required Skills/Abilities Necessary • Proficient with Microsoft Office Suite and Teams., • Strong verbal and written communication skills, • Experience in a manufacturing environment is a plus, • Experience with eLearning training development platform a plus. Physical Demands/Requirements • The employee must occasionally lift and move up to 50 pounds. Work Environment • Work environment is in a mix of office areas, classrooms, Shipping/Receiving, Manufacturing, Testing, and Calibration areas., • Ability to travel up to 10% of the time, if required.

Job Description Technical Sales – Industrial Equipment (Inside Sales) High‑Growth Role | Engineered Systems | Capital Equipment | No Degree Required I Application Sales Engineer Join a fast‑paced, customer‑centric technical sales team supporting engineered industrial equipment, across processing, manufacturing, water treatment, Food & Beverage environments. This role is ideal for a hands‑on technical professional who thrives at the intersection of customer support, industrial technology, and solution‑based selling. You’ll partner directly with field sales, engage with end users, and help drive growth across a high‑mix, high‑value product portfolio. Responsibilities • Sales Support — Serve as the primary technical resource for Sales Representatives, delivering expert guidance on engineered systems and capital equipment. Focus ~98% on expanding and supporting existing accounts, with ~2% on new business development., • Training & Enablement — Deliver product, application, and systems training to Sales Representatives to strengthen their technical confidence and selling effectiveness., • Customer Engagement — Interface directly with customers to understand process requirements, troubleshoot challenges, and recommend equipment solutions that align with operational goals., • Competitive Intelligence — Maintain strong awareness of competitive technologies, market trends, and industry benchmarks to position our solutions effectively., • Project Qualification — Support evaluation of project feasibility from both technical and commercial standpoints., • Order Management Support — Assist Sales Representatives with follow‑ups, quoting, and closing activities to ensure seamless order execution., • Specialty Equipment Requests — Review customer documentation for custom or specialty equipment needs; collaborate with the sales team to determine appropriate responses., • Proposal Review — Validate and approve proposals prepared by field sales before submission to customers., • Customer Visits — Conduct on‑site or in‑office meetings with prospective customers to strengthen relationships and support solution development., • Sales & Marketing Activities — Participate in trade shows, customer seminars, product demos, and other promotional events; assist with booth setup and teardown., • Team Collaboration — Work closely with the Sales Manager and broader team to support strategic initiatives and promotional campaigns. Requirements • Technical Aptitude — Strong mechanical/electrical problem‑solving skills; ability to understand engineered systems and industrial processes. CRM experience is a plus., • Industry Experience — Background with manufactured electro‑mechanical capital equipment; Food & Beverage processing experience preferred but not required., • Communication Skills — Excellent interpersonal, written, and customer‑facing communication abilities., • Education — ME/EE/CE degree is helpful but not required; equivalent hands‑on experience is fully acceptable., • Sales Experience — Proven success selling technical or engineered products; experience in processing, automation, or industrial equipment environments is a plus., • Business Acumen — Strong understanding of commercial principles and professional customer interaction., • Physical Requirements — Ability to bend, stoop, kneel, climb, balance, stand, and walk for extended periods; comfortable working in varied environmental conditions (temperature, weather, noise)., • Travel — Occasional travel required (2–5%). What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member, • To be a part of a well-established team that values hard work, innovation & knows the value of its people, • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them, • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management, • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success, • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team - YOU Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$93,475.37—$119,546.72 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Dempsey Uniform & Linen Supply is seeking a strategic, systems-oriented Maintenance Systems & Planning Manager to lead the standardization and continuous improvement of maintenance operations across our three production facilities. This role is the central architect of how maintenance is planned, executed, and optimized company-wide — building the procedures, tools, training programs, and standards that govern our production network. This is a hands-on leadership role without direct reports. The Maintenance Systems & Planning Manager partners closely with each site’s Maintenance Manager and Tech IVs, serving as their primary resource and mentor. The position requires regular travel to all production facilities. Key ResponsibilitiesMaintenance Standardization & PM Program Development ▪ Lead the standardization of maintenance practices across all three production facilities, creating consistent, repeatable processes company-wide ▪ Mentor site Maintenance Managers as they build out their individual preventive-maintenance programs ▪ Ensure alignment of all site-level PM activity with enterprise standards and best practices ▪ Continuously evaluate and improve maintenance procedures to reduce downtime and increase reliability CMMS Ownership (MaintainX) ▪ Serve as company-wide system owner for MaintainX, Dempsey’s Computerized Maintenance Management System ▪ Manage the vendor account-executive relationship and system licensing ▪ Lead full CMMS implementation at each production location ▪ Conduct ongoing PM and parts audits to ensure data integrity and system accuracy ▪ Oversee the escalated work-order process across all sites ▪ Establish and maintain company standards for parts creation, work-order completion, asset creation, and PM completion Equipment Install Project Management & Reliability ▪ Partner with senior leadership to specify equipment and plan capital and reliability projects across all production sites ▪ Manage smaller install projects independently; collaborate on larger projects with the Senior Director ▪ Lead major reliability efforts on tunnel/RAU systems, boilers, dryer controls, and fire-suppression systems ▪ Track project timelines, scope, and budgets; communicate status to leadership Vendor Relationship Management ▪ Serve as the primary liaison for Dempsey’s maintenance vendor network ▪ Manage vendor correspondence for parts procurement, install planning, and repair coordination ▪ Handle smaller vendor projects independently; partner with senior leadership on larger engagements ▪ Key vendor relationships include Kannegiesser, E-Tech, Innoway, Integritec, Ecolab, Keyence, Johnson Controls, BDS, and others Maintenance Training & Technician Development ▪ Drive development of structured on-the-job training materials and skills-progression programs for maintenance technicians ▪ Create evaluation frameworks for each technician level, establishing a clear career pathway within the trades ▪ Partner with leadership to build and maintain training documentation and competency assessments ▪ Coach and develop site Maintenance Managers to grow their teams’ technical capabilities Talent & Intern Program Management ▪ Manage and mentor the Maintenance & Engineering summer intern program (typically two interns per year) ▪ Create intern project scopes, host weekly check-ins, and keep participants on track toward deliverables ▪ Actively participate in the interviewing and hiring of maintenance technicians across all sites QualificationsEducation & Certifications ▪ Bachelor’s degree in Engineering, Industrial Technology, Facilities Management, or a closely related field preferred; equivalent experience considered ▪ Relevant technical certifications (e.g., CMRP, CPMM, CEM or trade licensure) a plus Experience ▪ 7–10 years of progressive experience in maintenance management, plant engineering, or a related industrial discipline required ▪ Proven experience managing or implementing a CMMS platform (MaintainX experience a plus) ▪ Demonstrated ability to manage projects independently, from scoping through completion ▪ Experience coordinating with external vendors for parts procurement, repairs, and equipment installations ▪ Background in industrial laundry, uniform services, textile production, or similar manufacturing environments preferred ▪ Prior experience developing technician training programs or structured skills-progression frameworks preferred Knowledge, Skills & Abilities ▪ Strong knowledge of preventive and predictive maintenance programs and best practices ▪ Excellent communication and interpersonal skills; able to mentor and influence without direct authority ▪ Ability to manage competing priorities across a multi-site, geographically dispersed organization ▪ Familiarity with boiler systems, tunnel washers, dryer controls, or fire-suppression systems preferred ▪ Proficiency with MS Office Suite; comfortable working with data and maintenance metrics ▪ Willingness and ability to travel regularly to production facilities ▪ Valid driver’s license with a clean driving record required Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At Cibo Vita, innovation drives everything we do. Based in Totowa, NJ, we craft premium healthy snacks under the Nature’s Garden brand, combining quality ingredients with creative flavor and function. Our products are designed to support wellness, sustainability, and better snacking choices-helping consumers “Snack With Purpose.” Job Summary: The Engineering Mechanic Supervisor will be responsible for supervising and supporting the engineering mechanics team to optimize manufacturing processes, ensure the seamless operation of equipment, and maintain safety and quality standards. This role requires strong technical expertise, leadership capabilities, and hands-on experience in troubleshooting, maintenance, and continuous improvement initiatives to enhance productivity and efficiency across all stages of production. Key Responsibilities: · Supervise and support the engineering mechanics team to maintain a safe, efficient, and reliable production environment. · Oversee the installation, maintenance, and repair of manufacturing equipment, ensuring minimal downtime and maximum productivity. · Implement and optimize process improvements that enhance product quality, reduce waste, and increase overall manufacturing efficiency. · Collaborate with cross-functional teams, including Production, Quality Assurance, and Research & Development, to troubleshoot and resolve technical challenges. · Develop and execute a preventative maintenance program for all critical machinery and systems · Ensure compliance with all local, state, and federal regulations related to food safety, equipment standards, and environmental concerns. · Supervise capital improvement projects, including equipment upgrades, process changes, and system enhancements, from planning to execution. · Provide technical training and mentorship to engineering mechanics and plant personnel to improve skill sets and knowledge across the team. · Monitor and support engineering-related budgets, ensuring cost-effective solutions for equipment and process upgrades. · Drive innovation in automation, data analysis, and lean manufacturing practices to enhance the company’s manufacturing capabilities. · Evaluate and recommend new technologies and practices that can improve operational efficiencies and product quality. Qualifications: · Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, or related field) preferred; equivalent hands-on technical experience considered. Requirements: · 5+ years of experience in engineering, maintenance, or mechanic supervisory roles within a food manufacturing or similar industrial setting. · Strong knowledge of food production processes, machinery, and food safety regulations. · Proven track record supervising maintenance or engineering mechanic teams and managing technical projects. · Expertise in process optimization, lean manufacturing, and continuous improvement methodologies. · Solid understanding of electrical, mechanical, pneumatic, hydraulic, and automation systems used in manufacturing. · Excellent troubleshooting and problem-solving skills, with a focus on practical and efficient solutions in a fast-paced environment. · Strong communication skills and ability to collaborate with cross-functional teams at all levels. · Proficiency in engineering design software (AutoCAD, SolidWorks, etc.) and Manufacturing Execution Systems (MES) is a plus. · Project management experience with the ability to handle multiple priorities and deadlines. · Experience with sustainability practices and a passion for food industry advancements is highly desirable. What do we offer: · Medical, Dental and Vision Benefits · Life Insurance · 401K · PTO · Company Paid Holidays · Career advancement and training