Industrial management jobs in Passaic, New JerseyCreate job alerts

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting., • Embodies a “culture of safety” in all tasks and recommends safety improvements. Other: Must have a valid Driver’s License. Must have or obtain a Certified Pool Operator certificate within 6 months of hire. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Brazing, soldering, and industry standard pipe joining techniques. Physical requirements: • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when required Controls, Controls Interface & Automation • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system response Preventive Maintenance & Compliance • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and procedures Customer Service & Communication • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicable Leadership & Mentorship • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluations Administrative & Technology Responsibilities • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements: Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction) Experience • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferred Technical Skills • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagrams Physical Demands • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPE Work Environment • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noise Competencies & Attributes • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 5+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Job Description: As a Refrigeration Technician, you will work with the maintenance team to maintain, troubleshoot, and repair HVAC, Refrigeration and facilities equipment to maintain critical temperatures and improve reliability of our systems. This role is the resident expert in refrigeration systems. Shift: Monday to Friday - 7:00am to 3:30pm You will... • Maintain and operate industrial refrigeration systems including large rack systems, split systems, blast chillers, cooling towers and ancillary equipment., • Lead and educate compliance with all safety, food safety, and security standards., • Perform preventive maintenance and routine inspections on assigned refrigeration and HVAC systems and ancillary equipment as needed., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower-level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in refrigeration., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced refrigeration processes, tools and techniques., • Audit maintenance personnel work and provide feedback to improve performance and quality., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • Write and/or modify PMs to standardize across the network and increase effectiveness., • Repair and perform predictive and preventative maintenance procedures on CO2 and Freon refrigeration systems including, but not limited to compressors, pumps, fans, heat exchangers, glycol systems, various industrial utility systems, motors, and power distribution systems., • Give direction and/or training to entry level refrigeration technicians including, but not limited to day-to-day operations, inspections and inspection techniques, basic repairs and repair techniques, and conformance to all state, local, and HelloFresh regulations and policies., • Perform building project work as assigned. You have... • 4-6 years of experience with refrigeration repair and maintenance in an industrial setting,, • Advanced understanding of rack system refrigeration and associated equipment., • Experience with repair and maintenance of glycol systems, heat exchangers, HVAC, and water chiller systems., • Experience with electrical systems including single and three phase motor systems, power distribution, and low voltage controls with the ability to troubleshoot to the component level., • Current Environmental Protection Agency (EPA) Section 608 certification., • All necessary regulatory licenses required by local municipalities to work in the field of industrial refrigeration., • Ability to demonstrate excellent work habits in line with Good Manufacturing Practices (GMP’s)., • Ability to conform to all OSHA, PSM, HAZMAT, and HelloFresh safety programs and regulations., • Ability to demonstrate understanding of proper handling and recycling procedures for chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), Hydrofluro-Olefins (HFO), CO2, and other industry standard refrigerant types., • Ability to safely replace mechanical and electrical components including motors, motor starters, switches, solenoids, pumps, refrigeration valves, compressors, and auxiliary refrigeration equipment., • Experience working with a wide range of networked refrigeration controls platforms., • Ability to withstand walking, lifting, bending, stooping, climbing ladders, walking on roofs, and working in confined spaces., • Basic computer skills., • Ability to read and understand drawings, schematics and diagrams., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude. You’ll get… • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+, • Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Newark, NJ Pay Range$39.50—$39.50 USDAbout HelloFresh We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers’ homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: • Europe: EUaccommodations@hellofresh.com, • APAC: APACaccommodations@hellofresh.com, • United States: USCandidateAccommodations@hellofresh.com, • Canada: CAaccommodations@hellofresh.com

Job Description Staff Management Group is seeking a Pit Operator for our client in Carlstadt, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 7AM - 3:30PM OR 8AM - 4PM, • Plus Overtime Pay Rate: • $19 / hour Job Summary: We’re hiring a Pit Operator to operate industrial trucks & stand-up and sit-down forklifts to load and unload trailers to then distribute and store materials. Job Responsibilities: • Move materials to and from production lines, loading docks, trailers, and designated storage areas, • Review daily work orders, production schedules, and shipping requests to complete tasks accurately, • Understand load capacities and equipment limits to ensure safe and efficient material movement, • Secure loads, wrap pallets, and prepare materials for safe transportation within the facility, • Inspect materials during handling and report discrepancies, damages, or equipment concerns immediately, • Operate forklifts and PIT equipment in full compliance with safety procedures and training standards, • Perform basic checks and minor servicing on PIT equipment; notify supervisors of required maintenance, • Update logs, inventory systems, and scanner entries to maintain accurate material tracking, • Maintain a clean, organized, and hazard-free work environment at all times, • Support additional warehouse tasks and operational needs as assigned. Job Requirements: • MUST be bilingual - English AND Spanish., • Valid forklift certification with a minimum of 3 years of PIT/forklift experience, • Capable of lifting up to 40 lbs and safely operating warehouse equipment, • Comfortable using handheld scanners and basic computer systems, • Strong multitasking ability, high attention to detail, and dependable work ethic, • Able to work independently and collaboratively in a fast-paced warehouse Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Key Accountabilities: • Install HVAC filters in various types of air handlers., • Perform visual inspections of each unit during the service., • Take notes of any deficiencies and forward it to manager to contact the customer., • Ensure that the service truck is maintained properly and as noted in vehicles specification guide., • Accountability of all tools., • Loading truck, keep truck clean., • Make initial contact with the person in charge when arriving on site and explain the day's work., • At the completion of the work will remove and dispose of all trash that was created from the work., • Have the paperwork signed., • Make deliveries and pickups when necessary., • Perform other duties as assigned., • Date and initial filters in filter bank., • Must be a team player, able to work w/ others., • Able to climb all types of ladders., • Not be afraid of heights., • Must clean all debris and spent filters off of roof tops and dispose properly., • On occasion be able to go out of town for service jobs., • Assist in warehouse when not on a service job. Position Requirements: • High School diploma., • Basic Math and reading skills., • Must have transportation to and from the branch office., • Must be able to climb ladders and work in heights., • Able to lift up to 75lbs pounds., • Experience working both indoors and outdoors., • Experience driving box trucks of various sizes., • Forklift experience a plus., • Comfortable working with hand tools., • Valid driver’s license., • Clean driving record., • Must be able to pass a Drug Panel and DOT Physical Examination., • Full-Time Availability.Requirements: Position Requirements: • High School diploma., • Basic Math and reading skills., • Must have transportation to and from the branch office., • Must be able to climb ladders and work in heights., • Able to lift up to 75lbs pounds., • Experience working both indoors and outdoors., • Experience driving box trucks of various sizes., • Forklift experience a plus., • Comfortable working with hand tools., • Valid driver’s license., • Clean driving record., • Must be able to pass a Drug Panel and DOT Physical Examination., • Full-Time Availability.

Job Description Job Title: Warehouse Worker Job Summary: We are seeking a dependable and detail-oriented Warehouse Worker to support daily warehouse operations. The Warehouse Worker will be responsible for receiving, storing, picking, packing, and shipping products while maintaining accurate inventory records and a safe, organized work environment. This role is ideal for someone who thrives in a fast-paced, team-oriented setting. Key Responsibilities: • Receive, inspect, and store incoming materials and products, • Pick, pack, and prepare orders for shipment according to company standards, • Accurately track inventory using RF scanners or warehouse management systems, • Load and unload trucks using pallet jacks, hand trucks, or forklifts, • Maintain cleanliness and organization of warehouse areas, • Follow all safety guidelines and company procedures, • Assist with cycle counts, inventory audits, and general warehouse projects as neededQualifications:, • Previous warehouse, distribution, or production experience preferred, • Basic math and computer skillsJob Type & Location This is a Permanent position based out of Saddle Brook, NJ. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saddle Brook,NJ. Application Deadline This position is anticipated to close on Jul 3, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionOverview: This position performs shipping and receiving responsibilities for company products and equipment. This position reports to the local Office Manager. Essential Functions: Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. • Completes daily receiving entries in a software system., • Participate in the management of raw materials and critical supply inventories, including maintenance and cleaning of inventory area, inventory organization and racking, inventory cycle counting and reporting, and routine inventory accounting., • Perform Quality Control inspection of inbound and outbound cases, equipment, and accessories,, • Performs general housekeeping, maintenance, and organization of the dock and inventory areas; includes hands-on cleaning and maintenance along with organization and interpersonal skills to coordinate with other departments. Conform to the 6S process., • Responsible for all warehouse functions including palletizing, de-palletizing, inbound/outbound order verification, and shipping/receiving duties, including lift truck and warehouse equipment operation., • Adherence to warehouse safety requirements and protocols., • Works closely with Logistics and performs cross-functional duties with other departments.Competency Requirements:, • Attention to detail, • Problem-solving skills, • Basic mechanic and electronic skills, • Moderate computer literacy, • Basic data entry skills, • Basic communication proficiency, • Basic organization skills, • Moderate time management skillsSupervisory Responsibilities: This position has no supervisory responsibilities. Work Environment: Work is regularly performed in a combination of office and warehouse environments and is regularly exposed to heavy machinery and noise. Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work: This is a full-time position. The days and hours of office operation are Monday through Friday 8:00am to 6:00pm. The specific schedule for this position is a 40-hour work week within the hours of business operation. Occasional evening and weekend work are required as job duties demand as well as a 24/7 rotational on-call schedule. Travel: Travel may be required for this position as mandated by the needs of the 8 Nationwide locations which would include out-of-area and overnight travel. Required Education and Experience: • Forklift Certification, • Minimum 1 year of experience in an industrial environment, • High School Diploma or equivalentPreferred Education and Experience:, • Forklift Certification, • 2+ year of experience in a related field, • 1 year of A/V technical experience, • Associate degree or technical certificate in a related fieldOther Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this position. Duties, responsibilities, and activities may change at any time with or without notice. QCpIUxuzF1

Job Description A Stock Control Clerk is responsible for monitoring, recording, and managing inventory levels to ensure that stock is available when needed and accurately accounted for. Key Responsibilities • Daily cycle count of electronic and non-electronic inventory, • Maintain accurate inventory records and stock databases in company system., • Receive, inspect, and record incoming goods and materials., • Count goods inward and compare against purchase orders and packing slips, • Monitor stock levels and identify shortages or excess inventory., • Conduct regular inventory audits and spot chd cks ., • Update stock movements, transfers, and adjustments in inventory systems., • Prepare inventory reports for management., • Coordinate with purchasing, warehouse, and sales departments., • Investigate and resolve inventory discrepancies., • Ensure proper storage and organization of stock items., • Follow company procedures for stock control and safety regulations. Required Skills • Experience with electronic components, • Good numerical and record-keeping skills., • Attention to detail and accuracy., • Knowledge of inventory management systems and Microsoft Excel., • Organizational and time-management skills., • Ability to work independently and as part of a team., • Good communication skills. Qualifications • Associates degree or accountant in training., • Previous experience in inventory, warehouse, or stock control is preferred., • Knowledge of stock management software is an advantage., • Minimum 3 years experience Sample Resume Job Description Managed inventory records, monitored stock levels, conducted regular stock audits, processed incoming and outgoing goods, investigated stock discrepancies, and maintained accurate inventory data to support efficient warehouse operations. Typical Past Work Environment • Warehouses, • B2B Electronic Distribution centers, • Manufacturing facilities, • Logistics companiesCompany DescriptionIndustrial telecommunications focused on public safety telecommunications and industrial communications. Extensive military applicationsIndustrial telecommunications focused on public safety telecommunications and industrial communications. Extensive military applications

Job Description We are looking for Porters, they are primarily responsible for keeping production and distribution facilities clean, organized, and compliant with health standards. They handle routine janitorial work, facility maintenance, and assist warehouse teams with inventory organization and deliveries. Key Responsibilities • Facility Sanitation: Sweep, mop, and sanitize floors in warehouses, corporate offices, and break areas., • Waste Management: Empty trash receptacles, dispose of cardboard, and ensure hazardous materials are handled properly., • Warehouse Support: Assist heavy-duty warehouse staff or order pickers by moving pallets, organizing inventory, and sweeping loading docks., • Safety Compliance: Clean up spills, remove debris from walkways to prevent workplace accidents, and strictly adhere to FDA and OSHA food safety guidelines., • Restock Supplies: Replenish cleaning and sanitation stations, as well as break-room supplies., • Equipment Maintenance: Perform basic, routine maintenance on cleaning machinery or alert facility managers to equipment malfunctions. Qualifications & Requirements • Physical Stamina: Ability to stand or walk for extended periods, lift heavy items, and perform bending, pulling, and carrying., • Safety Knowledge: Understanding of OSHA workplace safety, hazard communication, and sanitation protocols., • Reliability & Communication: Punctual and able to follow detailed instructions from warehouse supervisors or facility managers., • Equipment Certification: While not always required, familiarity with or willingness to learn how to use pallet jacks and industrial cleaning equipment is a plus.Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description Job Summary As a Sales Associate, you will be essential in providing exceptional customer service and ensuring a positive shopping experience. You will assist customers by understanding their needs, offering expert product recommendations, and facilitating transactions. Responsibilities also include maintaining inventory, managing pricing and product displays, and ensuring a clean and organized store environment. Your dedication to service will drive sales and build customer loyalty. At West Marine, our mission is to serve Boaters with a focus on "Know More, Get More, Boat More." Our customers rely on us to fulfill their needs, complete boat projects, or prepare for a great day on the water. Every interaction is an opportunity to exceed customer expectations and foster loyalty. West Marine is a Drug-Free Workplace and an Equal Opportunity Employer. Duties/Responsibilities • Greet and welcome customers as they enter the store., • Engage with customers to understand their needs using open-ended questions and active listening., • Provide detailed product knowledge and suggestive selling to enhance the customer’s boating experience., • Assist customers in selecting products and direct them to the appropriate aisle or location., • Inform customers about available services and assist with special orders or drop ship purchases., • Handle cash, credit, and on-account transactions accurately, including processing returns and managing the register., • Maintain accurate pricing by auditing and tagging merchandise, ensuring proper display and signage., • Assist with inventory management, including receiving, stocking, and replenishing merchandise., • Ensure the sales floor and aisles are neat, clean, and organized, removing any hazards or obstacles., • Support the buy online pick up in store (BOPIS) process and assist with buy online ship from the store as needed., • Alert management to potential security or loss prevention issues and assist in maintaining asset protection standards., • Complete all required training and review standard operating procedures (SOPs) for the position., • Be available to work a flexible schedule, including nights, weekends, and holidays., • Perform other job-related duties as assigned. Required Skills/Abilities • Strong verbal and written communication skills., • Ability to listen actively and respond to customer needs., • Proven sales and customer service abilities., • Familiarity with merchandise., • Point-of-sale systems; ability to learn new systems quickly., • Strong attention to detail and effective time management. Education and Experience • High school diploma or equivalent preferred., • Previous boating and/or retail experience preferred. Physical Requirements • Continuous standing and walking throughout the retail space., • Ability to wear and communicate through a headset continuously., • Frequent climbing, bending, stooping, and twisting., • Occasionally operate equipment, including forklifts., • Must be able to lift up to 50 pounds to shoulder height unassisted frequently. Minors under the age of 18 are subject to federal child labor laws that prohibit hazardous work, equipment operation, and exposure to dangerous conditions. Minors under 18 may not: • Operate, assist with, or be assigned to hazardous power‑driven machinery, including:, • Forklifts / powered industrial trucks, • Motorized pallet jacks, • Motorized conveyors, • Trash compactors and balers, • Power‑driven cutting, slicing, grinding, or processing machines, • Any other power‑driven equipment deemed hazardous, • Operate, assist with, or be assigned to conduct work involving, • Hot Knife, • Chain cutter,, • Other cutting instruments, • Transportation/Delivery, • Drive any motor vehicle as part of their job, • Act as a helper on delivery or transport vehicles, • Hazardous Materials & Chemical Exposure, • Handle, mix, or directly work with:, • Hazardous materials (HAZMAT), • Toxic, corrosive, or reactive chemicals, • Battery systems or chemicals posing burn/fire/explosion risk, • Clean up, respond to, or manage chemical spills, • Perform tasks involving significant exposure to hazardous substances, • HAZMAT Shipping & Logistics Activities, • Participate in hazardous materials shipping activities, including:, • Classifying hazardous materials, • Preparing hazardous shipments, • Signing or certifying shipping documents, • Independently handling regulated HAZMAT processes, • Hazardous Work Environments, • Work in areas where hazardous chemicals or materials are actively handled, processed, packaged, or shipped, • Work unsupervised in any area involving hazardous conditions Minors under 16 are subject to significantly stricter limitations and in addition to the limitation above may not: • Work in shipping, receiving, or warehouse operations, • Operate a manual pallet jack, • Perform backroom or logistics functions involving equipment or hazards, • Use a box cutter or any form of cutting instrument to open boxes or perform work., • Operate any power‑driven machinery Minors under 16 years old are limited to non‑hazardous, light‑duty retail tasks, such as: • Customer service, • Light manual stocking (nonhazardous materials only), • Basic cleaning (non‑hazardous materials only) West Marine offers a wide range of benefits, which include medical/dental/vision, various voluntary benefits, 401k, and paid time off. To view eligibility and additional information on these benefits, along with starting pay ranges for select states, please visit our benefits page at www.embbenefits.com/wm-home/. Join us at West Marine and help us provide the best boating experience for our customers!

Overview: The position of E&I Engineer will provide technical direction to assigned design efforts pre-and post-award of projects and will report to the Engineering Department Manager. This position will play a critical role on the project development team and must have experience in high-voltage, switchyard or substation design as well as be an expert in relay protection and controls. Location and Travel Details: This is a remote role and can be based anywhere in the United States. Must be able to travel up to 30% of the time. Company Overview MasTec Industrial, along with sister companies Casey Industrial and Phoenix Industrial, has served the power industry since 1947. We support utilities, developers, and municipalities with EPC services and project development expertise. Ranked by ENR as the #1 Power Contractor, we specialize in natural gas, oil, biomass, and waste-to-energy projects. Our team brings over 30 years of experience in utility and industrial systems, including simple and combined cycle plants and reciprocating engines. We’re committed to delivering quality, safety, and value at every project phase, from concept to operations. At MasTec Industrial, we invest in top talent and foster a respectful, inclusive environment where employees thrive as innovative leaders. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: • Review RFP/RFQ/Contract packages for technical requirements, • Prepare and maintain proposal technical exceptions and clarifications during the proposal process, • Develop technical bid packages for equipment and subcontractors, • Prepare technical evaluations and technical recommendations for equipment and subcontractors, • Monitor, support and administer technical subcontractors, • Review engineering deliverables for accuracy and Contract compliance, • Manage 3rd party engineers for progress, quality, and cost for specific discipline, • Provide input to schedule development, • Provide input to estimating regarding quantities and scope, • Support development of project reports and status updates, • Facilitate constructability reviews with engineering and construction parties, • Support construction and commissioning during and after completion of design engineering, for example RFI responses, • Develop project division of responsibilities, • Development of technical elements of project execution plans, • Visit sites as needed to assist on-site as required, • Visit subcontractors and suppliers to monitor progress and quality as required, • Support project closeout Qualifications: EDUCATION AND WORK EXPERIENCE REQUIREMENTS: • 4-8 years of relevant experience in engineering, • Bachelor’s degree in Engineering, • PE Certification and desire and ability to obtain PE Certification in other states as a required for projects, • Capable to visit construction sites and operating industrial plants KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Enthusiastic, willing to learn and flexible regarding day-to-day responsibilities, • Skilled in oral and written communication, • Passionate to be a technical team member to accomplish a high-quality product that satisfies the contractual requirements within budget and schedule, • Technical interdisciplinary communication and knowledge to enable other technical groups to produce a high-quality product, • Knowledgeable in industry standards, specifications and organizations, • Experience with execution of multiple EPC projects from bid through project completion, • Experience in developing, executing and presenting a high-quality proposal to management, • Other may duties may be assigned PHYSICAL DEMANDS: This position requires prolonged sitting at a desk and working at a computer. Must be able to lift up to 20 pounds at times. What's in it for you: Financial Wellbeing • Compensation $140,000 - $180,000 per year, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Remote Appcast (For Export): #appred

Job DescriptionTraveling Conveyor Installation Site Lead (Nationwide Travel Required) $33-37/hr + Overtime + Per Diem ($60) + Paid Travel About the Opportunity We are seeking an experienced Site Lead to oversee conveyor and material handling system installation projects at distribution centers across the United States. This is a hands-on leadership role responsible for coordinating crews, driving project execution, maintaining safety standards, and ensuring successful installation of conveyor systems. The position requires extensive travel and offers significant overtime opportunities Responsibilities • Direct and manage the day-to-day activities of on-site mechanical and controls technicians., • Act as the primary liaison between the on-site team and the Field Project Manager., • Ensure all installations and maintenance activities meet project specifications, safety regulations, and quality standards., • Supervise and coordinate the training and instruction of technicians, fostering a culture of continuous improvement and safety., • Oversee project schedule, making necessary adjustments to meet deadlines and reporting daily/weekly progress to the Field Project Manager., • Manage hours worked by the team to stay within the project's scope and budget., • Troubleshoot and resolve on-site technical issues promptly., • Plan and schedule project tasks in alignment with the milestone installation timeline(s), assigning responsibilities to ensure efficient completion of the project milestones., • Train and mentor team members in best practices for conveyor system installation and maintenance., • Maintain positive relationships with clients, contractors, and other stakeholders. Essential Skills • 7+ years of experience in a supervisory role within the mechanical and electrical installation field., • Experience working with Conveyor Systems., • PLC Knowledge., • Demonstrated leadership ability in managing field service teams., • Proficiency in reading and interpreting technical drawings and schematics., • Excellent problem-solving, analytical, and decision-making skills., • Strong communication and interpersonal skills., • Advanced proficiency with Microsoft Office, project management software, and familiarity with Autodesk products, ERP, and CRM systems., • Willingness to travel to client sites frequently, up to 100%. Additional Skills & Qualifications • High school diploma or equivalent; technical degree or certifications preferred., • Valid driver's license and driving record that facilitates automobile insurance company policy., • Understanding of Spanish is a plus., • Proficient typing skills required. Why Work Here? Joining our family-owned company means becoming part of a legacy that spans over 100 years. We are committed to investing in our employees with benefits such as medical and vision insurance from day one, a 401k with company match, profit share bonuses, and tuition reimbursement. Our company culture prioritizes employee care, evident through holiday cookouts and lunch-ins. Enjoy the opportunity for a long-term career with ample overtime for a substantial paycheck. Work Environment This role involves regular exposure to moving mechanical parts and requires compliance with safety standards per OSHA regulations. Candidates must be willing to travel extensively, spending 30-60 days on the road, and will often work in Amazon facilities, adhering to their safety requirements. The work environment is dynamic and involves using hand and power tools, lifting items up to 50 pounds, and operating forklifts and scissor lifts safely. #AeroJobsNFNY26 Job Type & Location This is a Contract to Hire position based out of Newark, NJ. Pay and Benefits The pay range for this position is $33.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Newark,NJ. Application Deadline This position is anticipated to close on Jul 14, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Overview: The Lemartec Senior Safety Manager is responsible for promoting and ensuring site safety and has a comprehensive knowledge of the day-to-day safety field operations for their assigned project(s), including planning, coordinating, and enforcing safety regulations and codes while serving as the company’s point of contact for owners, subcontractors, regulatory agencies, and Lemartec’ s team for all safety-related matters. Provides appropriate safety and health, accident prevention, and investigation training for managers and supervisors. Assists management in the annual safety overviews. Conducts safety meetings, audits, and inspections to ensure compliance, evaluate performance, identify corrective action, and implement follow-up assessments. Plans, implements, and conducts preventative care, safety, and compliance training programs. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, requiring travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, WY, and additional locations are added frequently as our organization continues to grow. Company Overview Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: • Develop and conduct safety processes and training which provide ongoing safety awareness, emergency response and safety orientation for new employees, • Development, delivery, and maintenance of all required OSHA written management processes to include recordkeeping requirements per local, state and federal regulations, • Perform daily site safety inspections and the inspection of safety equipment; removal of any defective equipment and manage the fall protection equipment inspection procedures, • Establish a schedule for the preparation, submittal, review, and acceptance of Job Hazard Analysis, • Develop, implement and maintain comprehensive accepted Job Hazard Analysis program through tracking log, • Accident Reporting, Accident Investigation and Recordkeeping, • Ensure subcontractor compliance regarding safety and health requirements, • Compile, analyzes, and interprets statistical data related to near-miss, incidents, injuries and illnesses, • Participate in fact finding Root Cause Analysis for injury/incident investigations and obtain accident and injury reports from jobsites, • Record and manage all site safety documentation and provide detailed weekly written reports, • Implements Company environmental policies in accordance with all existing and new State/EPA Laws and Regulations, • Recommends the purchase of all safety equipment, • Participate in safety pre-construction meetings and pre-work meetings, • Facilitate mass safety meetings and required weekly tailgate safety meetings, • Compile materials for safety meetings, prepare agendas, and record meeting minutes, • Manage and coordinate substance abuse testing and set up medical clinics for new jobsites, • Facilitate Lemartec’ s “return to work program” with employees, medical professionals, and project personnel Qualifications: Work Experience and Education • Bachelor’s Degree in occupational health or related field preferred, • A minimum of 10 years of work experience, • Previous Management experience is required, • OSHA 30 certification at a minimum, • Data center project experience preferred Knowledge/Skills/Abilities • Extensive working knowledge of OSHA regulations, ANSI standards, or other applicable codes, • Demonstrated construction safety experience with a field skill set, • Advanced Safety/Industrial Hygiene Certifications (CHST) or the ability to obtain the CHST preferred, • Experience in dealing with regulatory agencies, safety and health professionals, and legal representatives, • Proven ability to manage safety in a dynamic, fast-paced environment, • Full knowledge and understanding of all local, state, and federal OSHA requirements and construction safety, • Superior communication and organization development skills, • Strong interpersonal skills and ability to work with cross-functional teams, • Experience with the following software:, • Microsoft Office (Word, Excel, PowerPoint, etc.), • Document Control Programs (Procore) What's in it for you: Financial Wellbeing • Compensation Starting $130K per year / commensurate with experience, • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, and hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log in to your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal, and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-LV1 #LI-ONSITE Appcast (For Export): #appred

Job Description Corporate Paralegal • § Practice Area: Sophisticated Corporate Transactions and Healthcare Regulatory Compliance, • § Location: Roseland, NJ, • § Salary: $100k+ (negotiable depending on experience), • Comprehensive benefits package including medical, dental, vision, life, and disability insurance, 401(k) retirement plan, and paid time off., • Support staff may also be eligible for discretionary year-end bonuses and merit-based increases., • § Schedule: Full-time, Direct-Hire, Standard Professional Office Hours § The Firm: Our client is a rapidly growing and increasingly regarded law firm with headquarters in Roseland, NJ, where they established operations almost 100 years ago. Moving into 2026, they have recently opened their first office in New York City and continue to see healthy growth with the Manhattan office closing in on 20 attorneys total. They are renowned for their roots in commercial and industrial real estate practice, corporate litigation and with the addition of a new Managing Partner in 2020 have been expanding widely within healthcare law. The firm champions a collegial, integrity-driven culture, prioritizing the professional development of its staff and fostering an environment where exceptional support talent is both valued and rewarded. This is an opportunity to join a dynamic corporate practice during a period of serious growth. § Duties: The qualified individual will serve as a key player in execution and closing of multi-million dollar mergers & acquisitions, ensuring that clients see a smooth and safe transactional relationship by conducting heavy due diligence on potential acquisitions, scrutinizing each entities regulatory framework to ensure full compliance has been met and will continue to be in regards to the state and federal regulations revolving around healthcare services, medical providers, Medicare and Medicaid regulations and other critically important structures necessary to avoid non-compliance. While healthcare law experience is desired, it is not required for this role. What the Partners need most importantly is a Corporate Paralegal who has handled large corporate entity formations, transactions, governance and related UCC matters. § Core responsibilities include: ⨖ Assisting attorneys in the comprehensive execution of mergers, acquisitions, joint ventures, and corporate reorganizations, from inception through post-closing integration. ⨖ Performing exhaustive corporate due diligence, including review of organizational documents, minute books, stock ledgers, and maintenance of digital data rooms. ⨖ Managing and preparing Uniform Commercial Code (UCC) filings, searches, and terminations across various jurisdictions, ensuring perfection of security interests. ⨖ Drafting, compiling, and managing all closing documents, including officer certificates, corporate resolutions, schedules, exhibits, and post-closing organizational checklists. ⨖ Preparing and filing regulatory documents with state and federal agencies related to entity formation, business licensing, and healthcare-specific compliance matters (e.g., Certificates of Need, governmental program enrollments). ⨖ Maintaining and updating corporate records, governance materials, and entity management databases for a broad portfolio of client organizations. ⨖ Conducting foundational legal research on corporate governance, transactional mechanics, and specific healthcare compliance statutes to support attorney advisement. § Qualifications: Candidates must possess the requisite foundation and experience to immediately manage the core responsibilities of sophisticated corporate transactions. ⨖ A Juris Doctor (J.D.) from an ABA-accredited law school OR a Paralegal certificate from an accredited program. ⨖ A minimum of Five (5) years of direct, substantive experience as a corporate paralegal, with a demonstrated focus on Mergers & Acquisitions (M&A). ⨖ Proven expertise in the lifecycle of corporate entities, including formation, maintenance, and dissolution, with hands-on experience in UCC matters. ⨖ High proficiency in MS Office Suite, Adobe Acrobat, and modern document management and e-closing platforms. ⨖ Exceptional organizational abilities and a highly detail-oriented work ethic crucial for managing complex transaction timelines and data integrity. § Skills: The following are preferred traits and abilities not required, but would enable the candidate to excel in this position ⨖ Direct experience supporting transactions within the healthcare sector is preferred, although not required, including application of Medicare/Medicaid regulations, Stark Law, AKS, HIPAA. ⨖ Advanced proficiency in electronic document organization and management to a professional legal standard. ⨖ Demonstrated ability to work autonomously, prioritizing multiple high-priority tasks in a deadline-driven environment. ⨖ A professional and discreet demeanor when handling sensitive and confidential client information. !Notice¡ This a job advertisement on behalf of our client and does not reflect the full job description for the role. Any qualified candidates are encouraged to apply. This posting does not constitute an offer of employment and the listed compensation details may vary by state or experience and will be discussed thoroughly during interview phase.

Job Description T&M Associates is seeking a senior‑level client leader with deep experience and relationships within Oil & Gas, Industrial Manufacturing, and Chemical Manufacturing environments. This role combines strategic client management with proactive business development to expand T&M’s presence across North America. The ideal candidate is both a trusted client advocate and a strategic partner—focused on retention, growth, and long-term success for both our clients and the company. T&M is headquartered in the Northeast region, with offices strategically located throughout the country. This position can be located in proximity to any of our regional offices – NJ, PA, OH or IN. Key Responsibilities: • Client Relationship Management: Serve as the primary point of contact for assigned clients, ensuring smooth onboarding, timely communication, and a consistent, high-quality client experience., • Retention & Growth: Develop and execute strategies to strengthen client relationships, increase retention, minimize churn, and identify opportunities for cross-selling and upselling across T&M’s full suite of services., • Strategic Oversight: Oversee delivery of services to ensure satisfaction, quality, and alignment with client expectations. Collaborate with internal teams to ensure tasks are completed effectively and client commitments are met., • Client Advocacy & Engagement: Act as an advocate for client needs while balancing company objectives. Proactively address and resolve issues, ensuring both client satisfaction and operational efficiency., • Business Development: Identify and pursue new business opportunities through prospecting, networking, and industry engagement. Leverage existing relationships in Oil & Gas, Industrial Manufacturing, and Chemical Manufacturing sectors to drive regional growth., • KPI Management: Monitor and report on key performance indicators such as client retention rate, booked new business, net revenue growth, cross-selling activity, and direct labor multiplier to ensure alignment with company goals., • Strategic Planning: Play a key role in client selection, engagement decisions, and management assignments. Collaborate with leadership to align account strategies with broader business objectives., • Cross-Functional Collaboration: Partner with internal technical, operational, and sales teams to deliver tailored, high-value solutions that meet regulatory standards (RCRA, OSHA, environmental compliance)., • Market & Industry Insight: Stay current with industry trends and compliance requirements to provide clients with informed, strategic recommendations. Skills & Experience: • 15–20 years of private-sector experience in client management, business development, or sales, preferably within industrial, energy, environmental or engineering industries., • Proven success in maintaining and expanding long-term client relationships., • Strong negotiation, communication, and diplomacy skills to balance client advocacy with organizational goals., • Demonstrated ability to monitor and achieve key performance metrics., • Existing, verifiable relationships within industrial markets highly preferred., • Proficient in CRM tools, pipeline management, and performance reporting., • Willingness to travel regionally (including overnight) to meet with clients and attend industry events. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $160,000 and $192,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job DescriptionJob Summary We a re seeking a skilled Welder to perform maintenance, installation, and troubleshooting of radiation-shielded and RF-shielded door systems. This role involves mechanical and electrical work on large automatic mechanisms, ensuring precise alignment and compliance with safety standards in medical and industrial environments. Candidates must be able to work independently, communicate effectively with customers, and maintain professionalism in challengi ng settings. Key Responsibilities Pe rform routine maintenance on radiation-shielded and RF-shielded door systems. Install, align, and calibrate automatic door systems, heavy-duty operators, and safety sensors. Troubleshoot and diagnose mechanical and electronic issues in automatic door systems. Ensure precise adjustments and alignment of linear motion systems to meet performance standards. Provide customer guidance on proper operation and safety procedures. Communicate effectively with customers to understand needs and provide technical support. Prepare detailed service reports for management and customers. Coordinate pre- and post-project communications to manage expectations and ensure milestones are met. Adhere to safety guidelines and regulations, including mandatory PPE use per ANSI Z49.1. Communicate progress, issues, and recommendations to project management. Perform additional tasks as assigned by the Service Operations Manager or General Mana ger. Required Qualifications High school diploma or equivalent. Welding experience required; certified welder preferred. Strong mechanical and electrical troubleshooting skills, especially with automatic doors, linear motion systems, and safety interlocks. Ability to read and interpret technical manuals and schematics. Excellent communication and customer service skills. Ability to lift and carry heavy equipment. OSHA 30 Construction certification. Preferred Qualifications Tec hnical certification or associate degree in electrical, mechanical, or automation fields. Experience with PLCs or other control systems. Familiarity with ANSI/BHMA standards and safety guidelines for automatic door systems. MRI/RF experience highly desirable. Forklift, scissor lift, and first-aid certifications pr eferred. Certifications (if anys Ce rtified Welder (preferred). OSHA 30 Construction certification (required). Forklift, scissor lift, and first-aid certifications (preferred). Education: High School Certification: Certified WelderCompany DescriptionCompunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice. We have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice.\r\n\r\nWe have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.

Job DescriptionSUMMARYThe Industrial Maintenance Electrical Technician main duties are the installation, troubleshooting and repairs of the facility’s electrical distribution systems, and the electrical and electronic components of the industrial machinery and equipment. The Maintenance Electrician position requires the ability to work with plant management to identify equipment and systems that can be modified or applied to improve operational efficiency and must perform the following duties to ensure compliance with all applicable legal and regulatory requirements and in accordance with established company policies and procedures while maintaining the highest levels of safety, quality and productivity.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.1. Diagnoses malfunctioning electrical infrastructure apparatus such as transformers, breakers, Motor Control Center’s (MCC’S), breakers and repairs/replaces damaged or broken components.2. Properly size and install power supply wiring and conduit for newly installed machinery and equipment.3. Properly connects power supply wires to machines and equipment, and connects control and communication cables and wiring between machines, equipment and devices such as Variable Frequency drives and PLC’s.4. Familiar with Variable Frequency drives and able to communicate faults, malfunctions and issues to BSM personnel or contractor integrators and perform requested tasks to repair and replace components.5. Working knowledge of Programmable Logic Controllers required and the ability to take applicable training courses to gain knowledge and skills to become proficient with PLC’s.6. Troubleshoot and tests malfunctioning machinery and controllers and discusses malfunction with maintenance supervisor and operators to determine root cause.7. Troubleshoot and repair/replace faulty electrical components of machines such as starters, relays, switches, motors, and position sensing devices such as magnetic sensors and Proximity switches.8. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards, relays and fuses.9. Must complete assigned preventive maintenance tasks safely and efficiently.10. Replaces low voltage, 110v, 220v and 480v electric motor components as needed.11. Effectively and aesthetically plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings.12. Diagnoses and replaces faulty mechanical, hydraulic, and pneumatic components of machines and equipment.13. Work unscheduled hours as needed to accommodate Company’s need to achieve customer demand.14. Required to assist with general plant repairs and mechanical maintenance repairs as needed. Working knowledge of bearings, motors, etc…15. Will work 2nd or 3rd shift hoursQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.· Must have basic computer skills, advanced Motor Controls experience and knowledgeable with Variable Frequency drives.· Working knowledge of the National Electric Code and be able to read and interpret electrical schematics and wiring diagrams.· Must be able to demonstrate proficient use of all electrical meters and monitoring equipment.· Must be familiar with OSHA Electrical Safety requirements such as, but not limited to, NFPA 70E and Arc Flash Hazards and personal protective equipment.

Job DescriptionRole Overview: The Environmental, Health & Safety (EHS) Specialist is responsible for developing, implementing, and maintaining environmental, health, and safety programs across two manufacturing and warehouse facilities. This role ensures compliance with OSHA, EPA, and other regulatory requirements while promoting a proactive safety culture throughout the organization. This is a highly hands-on position requiring experience in manufacturing or warehouse environments, with a strong focus on OSHA compliance, employee training, incident investigations, hazard identification, and environmental health and safety programs. The ideal candidate is organized, detail-oriented, and passionate about driving workplace safety and regulatory compliance. Job Requirements: • Bachelor's degree in Environmental Science, Occupational Health & Safety, Industrial Hygiene, or a related field preferred., • Minimum 2+ years of EHS experience within a manufacturing or warehouse environment., • Strong knowledge of OSHA regulations, including OSHA 300 Logs, incident investigations, and regulatory reporting., • Understanding of EPA, RCRA, environmental regulations, and hazardous material management., • Experience conducting safety training, new hire orientations, and regulatory compliance programs., • Experience leading incident investigations, root cause analysis, and implementing corrective actions., • Knowledge of Lockout/Tagout (LOTO), Hazard Communication, PPE, machine guarding, and workplace safety programs., • Experience maintaining Safety Data Sheets (SDS), compliance documentation, and audit records., • Strong communication, presentation, and employee training skills., • Strong organizational, analytical, and problem-solving abilities., • Professional certifications such as OSHA 30, CSP, or CHMM are preferred.Personal Attributes / Skills:, • Strong commitment to workplace safety and regulatory compliance., • Excellent leadership, coaching, and employee engagement skills., • High attention to detail and documentation accuracy., • Strong communication and interpersonal skills., • Ability to work independently while collaborating with cross-functional teams., • Proactive mindset focused on continuous improvement. Physical Requirements: • Frequent walking throughout manufacturing and warehouse facilities., • Ability to conduct inspections in active production environments., • Occasional lifting of safety equipment or training materials as required., • Comfortable working around manufacturing equipment and warehouse operations. Key Responsibilities: • Maintain EHS Compliance: Develop, implement, and maintain environmental, health, and safety programs in compliance with OSHA, EPA, and regulatory requirements., • Deliver Safety Training: Conduct new hire orientations, refresher training, and hands-on instruction for LOTO, Hazard Communication, PPE, emergency response, and other safety programs., • Lead Incident Investigations: Investigate accidents, injuries, and near misses while performing root cause analysis and implementing corrective actions., • Manage Regulatory Documentation: Maintain OSHA logs, Safety Data Sheets (SDS), environmental records, and other compliance documentation., • Conduct Safety Audits: Perform routine inspections of manufacturing and warehouse operations to identify hazards, verify compliance, and recommend improvements., • Monitor Environmental Compliance: Oversee hazardous material handling, waste management, and environmental compliance activities., • Coordinate Emergency Preparedness: Organize fire drills, emergency evacuations, and emergency response procedures., • Support Safety Programs: Promote behavior-based safety initiatives and partner with leadership to strengthen the company's safety culture., • Manage Safety Vendors: Coordinate vendors supporting PPE, first aid, hazardous waste disposal, and other safety-related services., • Support Regulatory Inspections: Serve as the primary contact during regulatory inspections and maintain audit-ready conditions., • Perform Safety Inspections: Complete monthly inspections of fire extinguishers, cranes, hoists, and other required safety equipment., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at eoc@gritstaffinghr.com so we can assist you.

Job DescriptionTitle: Product Manager Location: Lodi, NJ (100% onsite0 Overview:Sterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. Hire Type: Direct HireBenefits: Medical, Dental, Vision, 401k Matching Bonus/ Incentives/ Stock Options: Annual Bonus Potential Pay: $110,000-140,000 Job Summary: • We are looking for a strategic Product Manager to lead innovation and drive product strategy across a broad portfolio. This position focuses on leveraging data, insights, and competitive analysis to influence internal product decisions that impact the entire customer base, rather than simply fulfilling individual customer requests. The ideal candidate has experience in retail manufacturing environments with exposure to multiple products, preferably in durable, rugged, or industrial-style product categories. This role will be part of a small team of three hires with staggered start dates. Job Duties: • Lead product innovation initiatives through competitive research and gap analysis, • Analyze competitor offerings and recommend enhancements or adjustments, • Own and interpret product data and insights to guide strategic decisions, • Drive internal product strategy and decisions, ensuring scalability across the customer base, • Collaborate cross-functionally to align product direction with business goals, • Support continuous improvement efforts across a diverse product portfolio Qualifications: • 4+ years of Product Management experience with a focus on innovation, gap analysis, and competitive research, • Proven ability to lead internal product strategy rather than executing solely customer-driven requests, • Background in retail manufacturing with experience managing multiple products, • Strong analytical skills and a data-driven mindset, • Career stability with demonstrated long-term commitments, • Excellent communication skills and comfort working collaboratively across teams Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description Required Skills & Experience • Previous sales, account management, customer service, business development, or outside sales experience., • Strong communication and relationship-building skills., • Ability to work effectively in a small, highly collaborative office environment., • Professional, personable, and team-oriented personality., • Experience working within distribution, supply chain, logistics, manufacturing, industrial products, or related industries. Strong organizational skills with the ability to manage multiple priorities simultaneously. Nice to Have Skills & Experience • Experience selling within chemical, manufacturing, industrial, technical, or distribution environments., • Technical background or experience supporting technical products., • Bachelor's degree in Supply Chain, Engineering, Business, Chemical Engineering, Technical Studies, or a related field. Experience managing both existing accounts and new business development efforts. Job Description BassTech International is experiencing continued growth and is seeking a Business Development Representative to help expand existing customer relationships while identifying new business opportunities. This role is ideal for a relationship-driven sales professional who enjoys working cross-functionally and wants to be part of a collaborative, tight-knit team. Unlike traditional sales positions, this role focuses heavily on account management, customer service, business development, and operational coordination rather than cold-calling or commission-driven sales. Just a Base Salary

Job Description Required Skills & Experience • Previous sales, account management, customer service, business development, or outside sales experience., • Strong communication and relationship-building skills., • Ability to work effectively in a small, highly collaborative office environment., • Professional, personable, and team-oriented personality., • Experience working within distribution, supply chain, logistics, manufacturing, industrial products, or related industries. Strong organizational skills with the ability to manage multiple priorities simultaneously. Nice to Have Skills & Experience • Experience selling within chemical, manufacturing, industrial, technical, or distribution environments., • Technical background or experience supporting technical products., • Bachelor's degree in Supply Chain, Engineering, Business, Chemical Engineering, Technical Studies, or a related field. Experience managing both existing accounts and new business development efforts. Job Description BassTech International is experiencing continued growth and is seeking a Business Development Representative to help expand existing customer relationships while identifying new business opportunities. This role is ideal for a relationship-driven sales professional who enjoys working cross-functionally and wants to be part of a collaborative, tight-knit team. Unlike traditional sales positions, this role focuses heavily on account management, customer service, business development, and operational coordination rather than cold-calling or commission-driven sales.

Job Description Brimar Industries is looking for a highly motivated and technically capable Inside Sales Representative to join our growing team. This role is essential to delivering a fast, professional, and solution-oriented experience to our existing customer base. The ideal candidate is an exceptional communicator, a confident negotiator, and an agile multitasker who thrives in a fast-paced, B2B sales environment. You will be responsible for responding to inbound requests for quotes (RFQs), guiding customers through technical product configurations, and building long-term relationships that turn one-time buyers into loyal customers. Key Responsibilities: Sales Execution • Respond promptly and professionally to inbound RFQs generated by marketing, ensuring rapid engagement with existing customers., • Provide consultative pre-sales support including technical product guidance, solution configuration, and use-case alignment., • Manage the full sales cycle from quote to close using HubSpot CRM and digital quote-to-order platforms., • Own and update your pipeline, ensuring timely follow-up and consistent communication with all active opportunities. Customer Engagement • Conduct discovery calls to understand customer needs, project requirements, and purchasing timelines., • Provide an outstanding customer experience with a solutions-focused, value-driven approach., • Navigate complex procurement scenarios and lead negotiations with professionalism and confidence. Technical & Market Knowledge • Demonstrate and grow technical product knowledge across Brimar’s portfolio of signage, labeling, and traffic control products., • Understand and communicate relevant industrial standards and certifications such as ANSI Z535, OSHA 1910.145, MUTCD (Manual on Uniform Traffic Control Devices), and NFPA (National Fire Protection Association)standards., • Stay informed about competitor offerings and positioning to effectively differentiate Brimar’s solutions. Process Management • Maintain accurate records and sales activity within HubSpot CRM., • Work collaboratively with operations, product, and customer service teams to ensure seamless order fulfillment and post-sale support., • Identify and suggest improvements to tools, processes, or workflows that improve sales efficiency or customer satisfaction. Qualifications • 3+ years of inside sales experience in a comparable industry (e.g., industrial safety, hardware, tools, or technical B2B products)., • Proven experience selling physical products that require inventory coordination and meet regulatory certifications., • Proficiency with HubSpot CRM and digital quote-to-order platforms., • Strong discovery, qualification, and negotiation skills., • Comfortable managing multiple concurrent opportunities and follow-ups in a structured, organized manner., • Self-starter with strong drive for performance and continuous learning., • Passionate about delivering value and solving real-world safety challenges for customers., • Highly organized, detail-oriented, and able to thrive in a fast-paced sales environment. Preferred Qualifications • Knowledge of industrial safety regulations and product certifications (e.g., ANSI, OSHA, MUTCD, NFPA)., • Experience in B2B sales to government, institutional, or industrial buyers., • Familiarity with manufacturing lead times, logistics, and inventory-based sales cycles. Why Brimar? • Join a company at the forefront of safety and compliance solutions., • Be part of a dynamic, growing sales team with real opportunities for career advancement., • Work in a collaborative environment where your input is valued and your growth is supported.

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Title: Laboratory Quality Technician Location: Leonia, NJ Company: Fortune 100 Food & Beverage Manufacturing (FuseGlobal has worked with this company for 20 years) Initial term: 6 months (position expected to run longer) Schedule: Monday-Friday; 1st shift About This Role: Under the direction of the Supervisor Quality Lab Services, Manager Quality Lab Services the Laboratory Technician Quality Services is responsible for performing routine laboratory support functions, cleaning of glassware, and general housekeeping. Non-routine duties are performed in a learning capacity under direct supervision. Responsibilities are focused on less complex testing and support functions. What You'll Do: • Perform qualitative analysis of samples., • Conduct routine and laboratory support functions, such as collecting samples, preparation of media, reagents and standard solutions, stocking and distributing supplies and equipment and collecting, washing and storing glassware. As required, maintains related notes and records., • Records data, performs calculations, analyzes, reports, and authorizes results. Performs peer review of data and provides critical analysis of laboratory systems. Keeps management apprised of progress., • Prioritizes workload and meets scheduled timelines., • Informs Supervisor of equipment and supply needs required to avoid delays in testing., • Reports results of assignments and maintains and performs related record keeping in compliance with approved regulatory policies and standards to meet quality and accuracy requirements., • Follows and complies with all appropriate SOP's, QP's, GMP's and safety and health requirements as applicable., • Demonstrate good housekeeping practices to minimize analytical mix-ups, potential laboratory contamination and safety hazards. Understanding and handling of hazardous materials and waste using proper and safe techniques., • Assists higher level technical and scientific personnel as needed to learn more advanced techniques, equipment, instrumentation and procedures specific to the Quality Control Department., • Display ability in interpreting and evaluating atypical/OOS results and immediately report them to Supervisor., • Show versatility and be able to work as a part of a team when required., • Other duties as assigned., • Exhibit positive attitude regarding work and responsibilities., • Ability to work collaboratively within teams., • Ability to focus on details., • Ability to maintain effectiveness during major changes in work tasks or the work environment; adjusting effectively to within new work structures, processes, requirements or cultures. What You Bring: • High School diploma or general education degree (GED) required., • Bachelor's degree in chemistry or other closely related discipline preferred., • 0 to 1 years of laboratory experience., • Ability to learn analytical skills., • Good time management skills and have the ability to meet deadlines., • Must be willing to meet tight deadlines and work overtime, if required., • Ability to write simple correspondence and have good verbal communication skills., • Basic mathematical skills., • Good computer skills (i.e. MS Word, Excel)., • Must be able to organize generated data, evaluate and interpret the results when compared to specifications. Working Conditions: • While performing the duties of this job, the employee is regularly required to walk, talk and hear., • The employee frequently is required to stand., • The employee may be required to sit for periods of time; reach with hands and arms., • The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Use of a standard computer keyboard for data entry., • Work environment may be exposed to powders, chemicals and allergens (peanuts, tree nuts, milk, dairy, eggs, wheat, gluten, soy, fish and shellfish. Compensation & Benefits: • $26.00 per hour + Overtime, • Medical insurance, • Dental insurance, • Vision insurance, • 401(k), • Disability insurance About FuseGlobal: FuseGlobal is a partnership of people and brand-leading companies, working together to make things run better. For 25 years we have brought functionality to complex business and production processes and supply chains, resulting in enterprises that run smarter and more sustainably. Interested in digital manufacturing, industrial engineering, supply chain management, all-things tech, and energy & the environment? This is where we live. Engage with us! #LI-Onsite #LI-FG

Job Description Since 1948, RONDO has been a world-leading supplier of dough sheeting and shaping machinery to the bakery industry, offering artisanal to industrial solutions that produce the finest croissants, pastries, donuts, pizza, and bread products. Headquartered in Switzerland with additional factories in Italy and France, RONDO equipment solutions are sold and serviced to North American customers through subsidiary RONDO Inc., located in Moonachie, New Jersey. Due to tremendous growth, we are seeking a Service Coordinator to join the RONDO North America team. We offer a competitive salary + generous medical and dental benefits, and a 401(k) match of 4%: along with a warm and collaborative company culture dedicated to supporting the bakery community. www.rondo-online.com About the Role: The Service Coordinator in our manufacturing facility in New Jersey plays a critical role in ensuring seamless coordination and support for our service operations. This position is responsible for managing service requests, scheduling maintenance activities, and maintaining accurate records to support operational efficiency. The Service Coordinator acts as a liaison between the service team, customers, and other departments to facilitate timely communication and resolution of service issues. By organizing workflows and tracking service performance metrics, this role contributes directly to customer satisfaction and the overall reliability of our manufacturing processes. Ultimately, the Service Coordinator ensures that service operations run smoothly, supporting both internal teams and external clients effectively. Minimum Qualifications: • High school diploma or equivalent required; associate degree or higher preferred., • Minimum of 2 years experience in an administrative or service coordination role, preferably within manufacturing or a related industry., • Proficiency with Microsoft Office Suite (Word, Excel, Outlook) and experience with service management software., • Strong organizational skills with the ability to manage multiple tasks and priorities effectively., • Excellent communication skills, both written and verbal, to interact professionally with customers and internal teams. Preferred Qualifications: • Experience working in a manufacturing environment or with industrial equipment service operations., • Familiarity with ERP systems such as SAP for service and inventory management., • Create service tickets within C4C/SAP., • Basic understanding of manufacturing processes and terminology., • Customer service experience with a focus on problem-solving and conflict resolution., • Certification in office administration or project coordination is a plus. Responsibilities: • Coordinate and schedule service appointments and maintenance activities with internal teams and customers., • Manage service documentation, including work orders, service reports, and customer communications., • Serve as the primary point of contact for service-related inquiries, providing timely and accurate information., • Maintain and update service databases and tracking systems to ensure data accuracy and accessibility., • Collaborate with production, logistics, and quality assurance teams to support service delivery and resolve issues., • Monitor service performance metrics and assist in preparing reports for management review., • Support the service team with administrative tasks such as invoicing, parts ordering, and warranty tracking. Skills: The Service Coordinator utilizes strong organizational and communication skills daily to coordinate service activities and maintain clear, professional interactions with customers and internal teams. Proficiency in Microsoft Office and service management software enables efficient handling of scheduling, documentation, and reporting tasks. Analytical skills are applied to monitor service metrics and identify areas for process improvement. Problem-solving abilities help address service-related issues promptly, ensuring minimal disruption to operations. Additionally, familiarity with manufacturing processes and ERP systems enhances the ability to support cross-functional collaboration and maintain accurate service records.

Job DescriptionSoltage - Procurement Manager Company Overview: Soltage is a leader in the development, financing, and operation of distributed utility-scale solar, storage and solar + storage assets for commercial, industrial, municipal, and utility customers across the United States. Soltage has developed more than 135 solar energy projects, with more than 600 MW total distributed generating capacity in operation or under construction and invested over $1.5 billion to date into the US clean energy sector. Position Description:The Procurement Manager is a key member of the Project Management team who will own end-to-end equipment and materials procurement across Soltage's entire project portfolio, from early-stage long-lead identification through purchase order execution, vendor management, physical inventory custody and site dispatch. The Procurement Manager is a central point of coordination between Development, Engineering, Project Management, and Finance on all third-party supply decisions and company-owned equipment movements. This role will be a key architect of Soltage's procurement and inventory process as the company continues to scale. Job Responsibilities:Long-Lead Equipment Procurement: • Own the long-lead procurement schedule for all active and near-term projects., • Manage procurement of PV modules, inverters, transformers, BESS systems, switchgear, and balance-of-plant materials., • Coordinate with Engineering and Project Management to identify long-lead items at FNTP and initiate procurement., • Track all open purchase orders from issuance through delivery and acceptance; escalate any delivery risk to SVP., • Maintain portfolio-level PO records including but not limited to open orders by project, vendor, delivery date, and status. Vendor Management & RFQ Process: • Manage Soltage's approved vendor list for key equipment categories; evaluate new vendors against cost, quality, and lead time criteria., • Run competitive RFQ/RFP processes for equipment and materials where multiple qualified suppliers exist., • Maintain price benchmarks by equipment type and market; flag deviations from benchmarks to SVP before PO execution., • Build and maintain vendor scorecards tracking delivery performance, defect rates, and warranty claim history., • Negotiate pricing, payment terms, and warranty provisions on equipment supply agreements; escalate to legal on non-standard terms. Inventory Management & Logistics Management: • Own and maintain the master inventory ledger for all Soltage-owned equipment and materials across all storage locations nationwide (modules, transformers, BESS units, switchgear, and other owner-furnished items)., • Conduct or coordinate regular physical inventory counts. Reconcile physical counts against the ledger, resolve discrepancies with Finance and Portfolio Management[MD1] ., • Assign inventory to projects in coordination with the construction schedule; ensure equipment is released from storage and dispatched to site in alignment with EPC mobilization timelines and NTP windows., • Manage logistics from storage locations to project sites, including transportation vendor selection, freight coordination, and chain-of-custody documentation., • Track equipment condition at receipt and throughout storage; flag any damage, storage risk, or warranty claim to SVP and Engineering., • Maintain a real-time inventory dashboard showing total units on hand, allocated vs. unallocated inventory by equipment type, location, and project assignment., • Coordinate with Project Management and Finance to ensure inventory movements are reflected accurately in project cost tracking and draw certifications. Safe Harbor & Compliance Procurement: • Support annual Safe Harbor module and transformer procurement programs, coordinating with Legal and Portfolio Management on contract execution and payment schedules., • Track Safe Harbor inventory allocation (covered projects, designated equipment and delivery scheduling against contracted delivery requirements) in close coordination with the inventory ledger., • Ensure procurement and inventory records satisfy compliance and tax documentation requirements as needed. Contract & Cost Management: • Prepare and execute purchase orders and equipment supply agreements., • Track equipment costs against project budgets and approved amounts, flag any scope changes or price escalation as necessary ., • Coordinate approvals for equipment procurement on financed projects, ensure all draw conditions related to equipment delivery are satisfied, • Support preparation of the procurement and inventory sections of reporting packages., • Manage the implementation of a procurement module, including SOP development and data migration from existing tracking systems. Experience and Education Requirements: • Minimum of 5 to 7 years of procurement, supply chain, or project controls experience in solar, energy storage, or construction., • Background in contract administration or legal coordination on equipment supply agreements is preferred., • Experience in distributed generation or C&I solar at an IPP, developer, or EPC firm is a plus., • Direct experience procuring major equipment categories: PV modules, inverters, BESS, transformers, or comparable capital equipment, • Demonstrated experience managing physical inventory across multiple locations — maintaining ledgers, conducting reconciliations, and coordinating logistics., • Experience coordinating equipment dispatch and logistics to active construction sites., • Ability to manage competitive RFQ/RFP processes from solicitation through award., • Familiarity with construction project delivery (EPC, design-build, or owner-furnished equipment models)., • Familiarity with ITC Safe Harbor requirements., • Experience supporting lender draw processes or owner's representative functions on capital-intensive projects., • Proficiency with procurement and inventory tracking in Excel; experience with Salesforce, Procore, or ERP systems a plus., • Strong written and verbal communication., • Ability to interface with EPC contractors, equipment vendors, logistics providers, lenders, and internal leadership. Location: This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, New Jersey. Application Instructions:To apply, send your resume to HR@soltage.com with the subject line “Procurement”. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination.️‍PROTECT YOURSELF FROM FRAUDPlease be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Job DescriptionCompany Description THE COMPANY Continental is a leading tire manufacturer and industry specialist that develops and produces sustainable, safe and convenient solutions for automotive manufacturers as well as industrial and end customers worldwide. Founded in 1871, the company generated sales of €39.7 billion in 2024 and currently employs around 95,000 people in 54 countries and markets. ContiTech is one of the world’s leading industry specialists. The Continental group sector offers its customers connected, environment-friendly, safe and convenient industry and service solutions using a range of materials for off-highway applications, on rails and roads, in the air, under and above the ground, in industrial environments, for the food sector and the furniture industry. With about 39,000 employees in more than 40 countries and sales of some 6.4 billion euros (2024), the global industrial partner is active with core branches in Asia, Europe and North and South America. Are you ready to shape the future with us? Job Description The Sales Manager Exterior Living is accountable for aggressively driving and executing the segment’s sales strategy in the assigned region, with full responsibility for delivering ambitious growth targets in sales, margin, and market share for the LivTec product portfolio for Pool applications. This role is expected to consistently outperform budgeted results, proactively identify new business opportunities, and ensure the segment’s financial and strategic objectives are met or exceeded. HOW YOU WILL MAKE AN IMPACT • Define, implement, and relentlessly pursue a high-impact sales plan for markets, products, and industries within the region., • Set and achieve challenging margin and growth targets, driving commercial excellence and market penetration., • Lead by example in customer acquisition, retention, and satisfaction, building robust relationships with key accounts and stakeholders., • Analyze sales performance, market trends, and competitive dynamics to anticipate risks and seize opportunities., • Develop and execute forward-thinking tactical and strategic plans aligned with segment growth objectives., • Identify and capitalize on emerging market trends, disruptive technologies, and new product opportunities., • Present actionable business strategies and results to executive leadership, ensuring alignment and buy-in., • Uphold the highest standards of quality, technical compliance, and customer care., • Represent the segment externally, strengthening relationships with customers, authorities, and industry partners., • Other duties as requiredQualifications WHAT YOU BRING TO THE ROLE • Bachelor's Degree in a related field, • 5 years+ of sales management experience in a relevant industry,, • Demonstrated track record of exceeding ambitious sales and margin targets, • Expert-level sales, negotiation, and presentation skills, • Advanced financial acumen and business management expertise, • Deep market knowledge, including customer and competitor trends, • Proven ability to drive commercial excellence and strategic transformation ADDITIONAL WAYS TO STAND OUT • Experience an exterior lamination -- Pool Applications/industry Pool Liner Additional Information THE PERKS • Competitive Pay, • Immediate Benefits, • Paid Time Off, • Employee Discounts, including tire discounts, • Competitive Bonus Program, • Employer 401(k) Match, • On-Site Gym, • And more benefits that come with working for a global industry leader! All your information will be kept confidential according to EEO guidelines. EEO-Statement: EEO / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities for qualified individuals with a disability and protected veterans, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to Careers@conti-na.com or contact US Recruiting at 800-821-2727. This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back. Ready to drive with Continental? Take the first step and fill in the online application.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: http://www.daikin.com/about/corporate/philosophy/index.html AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: This position will report to the regional branch in New Jersey and work out of their home, ideally located in the territory. The territory for this position covers Nassau and Suffolk counties and the outer boroughs of Queens, Brooklyn, Bronx and Staten Island. Achieves maximum sales profitability, growth and account penetration within an assigned territory and/or market segment by effectively selling the Company’s products. Contacts and secures current and new business accounts/customers. Key Accountabilities: • Promotes/sells/secures orders from existing and prospective customers through a relationship-based sales approach highlighting the advantages/value proposition., • Demonstrates products to existing and potential customers and assists them in selecting those best suited to their needs., • Manages sales goals - profit and budget expenses., • Establishes, develops and maintains business relationships with current customers and prospective customers in the assigned territory/market segment to maintain current and generate new business., • Researches sources for developing prospective customers and for information to determine their potential., • Develops clear and effective written proposals and quotations for current and prospective customers., • Expedites the resolution of customer problems and complaints., • Coordinates sales effort with marketing, sales management, accounting, logistics and technical services., • Analyzes the territory/market’s potential and determines the value of existing and prospective customers to the Company., • Creates and manages a customer value plan for existing customers highlighting sales profile, share and value opportunities., • Provides management with detailed information on customer needs, problems, interests, competitive activities, and potential for new products., • Stays current with product applications, technical services, market conditions, competitive activities, and marketing trends and activities., • Participates in trade shows and conventions as required., • Perform other related duties as assigned as required. Requirements: Position Requirements: • Bachelor’s degree from an accredited university in Business or related field preferred;, • 5+ years' prior selling experience;, • Understanding and experience with high value-added product selling, pricing, and negotiation;, • Experience selling to healthcare and pharmaceutical facilities a plus;, • Ability to communicate a technical concept or value added benefit to achieve buy-in from diverse teams to meet sales targets and profitability;, • A history of consistently delivering on expectations for growth and profitability must be demonstrated;, • A team player that possesses a natural way of influencing, both internally and externally;, • A self-starter with a creative eye to implement marketing and promotional campaigns designed to achieve specific growth objectives regionally and nationally;, • Must be proficient in Microsoft Office (Word, Excel, PowerPoint);, • SAP or CRM experience, Salesforce preferred.

Job Description Join the H&S Family of Bakeries – the team behind H&S Family of Bakeries includes Northeast Foods, H&S Bakery and Schmidt Baking Co. – the largest family-owned variety baker in the United States. Headquartered in Baltimore, Maryland, we operate a network of 10 bakeries and 30 distribution centers across the country to deliver fresh, high-quality baked goods nationwide, from fast food and quick-service restaurants to cafeterias, hospitals, grocery stores and universities to name a few. We’re passionate about innovation in manufacturing and distribution, leading the way in the industrial baking industry, while creating opportunities for our people to grow and succeed. Our Core Beliefs: Be Well, Work Well | Create an Experience | Life-long Learning | Do the Right Thing The Loader plays a critical role in the support of our Distribution team. The General Help/Loader will load and unload products, pick products for route drivers, count inventory, ensure efficiency and accuracy in product pulling, maintain cleanliness in the work area, and work collaboratively with the team. In this role, you will: Efficiently load and unload product and bakery items, ensuring the safe handling of goods to prevent damage. Accurately select and prepare products for dispatch, aligning with route drivers' schedules to optimize delivery processes. Conduct thorough inventory counts, contributing to the accurate tracking and management of product inventory. Complete paperwork (load sheets, block sheets) with accuracy and neatness. Perform trailer checks, including sweeping and checking for damage, and submit information to the department manager. Inform supervisors in advance of the floor inventory of empty trays and other equipment. Uphold the highest standards of efficiency and precision in all tasks, particularly when allocating products for specific routes. Maintain a clean and orderly work area, adhering to safety and hygiene standards to ensure a safe working environment for all team members. Collaborate effectively with fellow team members, contributing to a cohesive and supportive work environment. Responsibly operate and maintain company equipment, including forklifts, ensuring their longevity and safety compliance. Requirements & Physical Demands: Must be at least 18 years of age. Count and perform basic math. Strong interpersonal abilities, with a focus on teamwork and collaborative problem-solving Familiarity with basic computer software, particularly spreadsheet tools, for effective inventory management is highly desired. Previous experience in a labor-intensive role, warehouse settings preferred, demonstrating a commitment to diligence and quality. Flexible availability, with the willingness to work various shifts in support of our 5-day-a-week operation's needs. Essential Physical Requirements: Ability to lift and carry up to 50 pounds, and push and pull heavy wheeled equipment or carts in a fast-paced manufacturing environment, with or without reasonable accommodation. Ability to stand and/or walk for extended periods of time during a shift, maintaining a normal range of motion in all extremities. Ability to reach, bend, stoop, and crouch to access equipment, tools, or materials. Ability to use arms, hands and fingers to handle or operate machinery, tools or controls. Ability to perceive and respond immediately to visual and audible safety alerts and warnings to ensure the safety of self and others in a fast-paced, hazard-sensitive environment with or without reasonable accommodation. Ability to work in environments with varying temperatures, noise levels, and airborne particles, odors and fumes. Ability to climb stairs, ladders, or work platforms as required by the position. Ability to sit for prolonged periods using office equipment and computer systems. Ability to wear required personal protective equipment (PPE) and protective clothing for extended periods of time, with or without reasonable accommodation. What’s in it for you? At H&S Family of Bakeries, we value our team members and work hard to create a workplace where people can grow and thrive. Along with equitable pay, we provide exceptional benefits designed to support you both at work and in life. Our comprehensive and affordable packages include medical, dental, and vision coverage; short-term disability; retirement savings; paid time off; flexible spending accounts; an employee assistance program; and, of course, some very cool company swag. Equal Opportunity Employer: H&S Family of Bakeries is proud to be an Equal Opportunity Employer. We welcome diversity and are committed to creating an inclusive environment for all team members. We consider all qualified applicants without regard to race, color, religion, sex, national origin, political affiliation, sexual orientation, gender identity, marital status, disability, genetic information, age, membership in an employee organization, or any other factor unrelated to merit. Offer Determination Guidelines: The salary range listed for this position is provided in accordance with applicable transparency laws and serves as a general guideline. However, it does not represent a guaranteed salary offer. Actual compensation will be determined based on a variety of job-related factors, which may include but are not limited to relevant experience, skills, education, internal equity, market data, and geographic location, including local cost of living. The final offer may vary outside the posted range based on these considerations.

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Qualifications are a guide, not a checklist. If you think you can make an impact here, we want to hear your story! JOB SUMMARY The Outside Sales Representative (OSR) is responsible for profitably growing Atlantic Plywood's sales through disciplined territory management, strategic selling, and a relentless focus on delivering customer value. OSRs serve as business consultants, building demand for APC's core and new products, expanding market share, defending existing business, and contributing to APC’s position as the best, most professionally run sales organization in our industry. The OSR must consistently meet or exceed sales and profit goals, leverage Salesforce to drive and document all customer interactions and opportunities, and actively contribute to business initiatives. This is a field-based role requiring extensive customer-facing activity and effective self-management. A motor vehicle record (MVR) check will be conducted, and an acceptable record will be required. KEY RESPONSIBILITIES Sales Growth and Profitability: • Meet or exceed annual Sales and Profit Plans., • Exceed assigned Business Unit (BU) sales performance targets., • Create and close new sales opportunities in both existing and new accounts., • Drive demand for new products through education, presentation, and pipeline development., • Execute Focus Product Sales Goals. Customer Relationship Management: • Maintain and grow a portfolio of active customers while identifying and onboarding at least 20 new accounts per year (mix of DOA or New Credit App Accounts)., • Consistently solidify existing relationships and create new relationships with decision-makers and influencers., • Execute strategic, productive sales calls with clear objectives aligned to account growth and opportunity development. CRM, Sales Activity, and Territory Management: • Record all sales activities, customer interactions, follow-ups, and sales calls in Salesforce daily without exception., • Create and manage Sales Opportunities within Salesforce as directed., • Use Salesforce dashboards and reports to forecast, manage pipeline health, and prioritize customer engagement., • Pre-plan a minimum of 10 targeted sales calls per day., • Conduct monthly strategic ride-alongs with a Sales Manager, Product Manager, and Vendor Representatives., • Execute full, pre-planned sales days and meet or exceed BU expectations for calls per day., • Build and manage a healthy pipeline, focusing on identifying and progressing growth opportunities., • Defend and grow existing business through smart territory allocation and time management. Collaboration and Internal Engagement: • Partner effectively with Product Managers, Vendor Representatives, and Demand Creation Teams., • Participate fully in company-driven initiatives and training programs., • Support cross-selling and cross-support efforts across Parksite business units., • Actively engage with management on market intelligence, competitive insights, and product opportunities. Performance Expectations: • Consistently execute a structured, disciplined sales approach focused on growth, profitability, and professionalism., • Build and maintain a robust sales pipeline, aligned to forecast goals and territory objectives., • Deliver professional, value-based sales presentations that differentiate APC in the marketplace., • Defend and grow business efficiently, allocating time wisely between offense (growth) and defense (retention). MINIMUM QUALIFICATIONS • High School diploma or GED required; Bachelor's degree in Business, Sales, Marketing, or related field preferred., • 2+ years of proven success in an outside B2B sales environment, preferably within building materials, industrial sales, or a related industry., • Demonstrated CRM discipline (Salesforce strongly preferred)., • Excellent communication, negotiation, and time management skills., • Valid driver’s license with an acceptable Motor Vehicle Record (MVR)., • Willingness and ability to travel extensively within the assigned territory. Benefit Package Includes: • Paid Time Off, • Medical, Dental, & Vision Insurance, • Life Insurance, AD&D, • Short & Long Term Disability, • Employee Stock Ownership Plan (ESOP), • 401(k) with Company Match #Atlanticplywoodhiring

Job Description Brand Director (Carrera, Polaroid, Under Armour) & Head of PR & Communications – NA About Safilo Have you ever wondered who’s behind a pair of glasses? It’s us, from Safilo. Established in 1934 in Italy’s Veneto region, Safilo Group is one of the eyewear industry’s principal players in the design, manufacturing and distribution of optical frames, sunglasses, sports eyewear, goggles and helmets. The Group designs and manufactures its collections by blending stylistic, technical and industrial innovation with quality and skillful craftsmanship. With an extensive global presence, Safilo’s business model enables it to monitor its entire production and distribution chain. With more than 30 brands, Safilo covers all the consumer segments: from Fashion Luxury – with Boss, Carolina Herrera, Etro, Isabel Marant, Missoni, Moschino, PORTS – to Lifestyle – with Carrera, Dsquared2, Eyewear by David Beckham, Marc Jacobs, Levi’s, Tommy Hilfiger, Tommy Jeans, Kate Spade New York, Kurt Geiger, Fossil, HUGO, Juicy Couture, Liz Claiborne, Love Moschino, Pierre Cardin, and Stuart Weitzman – and Sports & Outdoor – with Smith and Under Armour – up to Mass Cool – with Blenders, Polaroid, Privé Revaux and Seventh Street. ROLE PURPOSE To lead the brand strategy, marketing, and business development of Carrera, Polaroid, and Under Armour in North America, while directing the Communication and Public Relations strategy across the full NA brand portfolio — driving brand equity, consumer demand, and sustainable, profitable growth in coherence with Global HQ teams and the Fashion Houses/Licensors. KEY PROCESS ACCOUNTABILITIES A. Brand Management & Strategy (Carrera, Polaroid, Under Armour – NA) • Defines and executes the NA brand strategy, positioning, and annual marketing plans for the assigned brands, in alignment with global brand guidelines and licensor expectations., • Owns the brand business performance in NA — sell-in/sell-out, market share, and P&L contribution — partnering with Sales, Trade Marketing, and Product to hit revenue and profitability targets., • Drives the go-to-market calendar: product launches, collections, seasonal campaigns, and 360°ree; activations., • Translates consumer, market, and competitive insights into actionable brand and product recommendations for the NA market., • Manages the assigned A&P/marketing budget, ensuring efficient allocation and strong ROI., • Acts as the primary NA point of contact with the Fashion Houses/Licensors for the assigned brands, ensuring brand integrity and compliance with license agreements. B. PR & Communications Leadership (all NA portfolio brands) • Provides, develops, and monitors the NA Communication & PR plans across the entire brand portfolio, • Manages and executes communication and PR programs and projects, coordinating with Fashion Houses, external media agencies, and Safilo brand teams to deliver assigned targets and maximize ROI., • Coordinates the external media/PR agencies at the NA level, providing input and solutions to resolve critical situations in line with global guidelines., • Ensures the editing of institutional communications, press interviews, video, and press materials — providing agencies and Safilo PR offices with direction on content, imagery, and style., • Monitors all PR & Communication projects through weekly/monthly reporting, evaluating risks and proposing mitigation actions., • Collaborates with the Legal Department to structure external collaborations/partnerships in compliance with legal and company rules. D. Budget Management • Provides inputs to define the Communication & PR budget across the NA portfolio and ensures sound day-to-day and special-project budget management in line with business objectives. SKILLS & REQUIREMENTS • Proven brand management and marketing leadership, ideally in eyewear, fashion, consumer, or licensed-brand environments., • Strong command of PR & Communication channels, marketing KPIs, and marketing/communication tools., • Commercial and P&L acumen; ability to translate strategy into measurable business results., • Experience managing external agencies and licensor/Fashion House relationships., • People leadership and cross-functional collaboration skills. Why You’ll Love Working With Us: We offer more than just a job, we provide a supportive environment where you can grow, feel valued, and enjoy your work. Our benefits include: • Comprehensive Health Coverage: Medical, Dental, Vision & Prescription Drug plans., • 401(k) with Company Match: Invest in your future with confidence., • Generous Time Off: 10 paid holidays + 1 floating, paid sick time, plus generous PTO package., • Hybrid Work & Flexibility: Enjoy a hybrid schedule. (3 days in office, 2 days remote), • Employee Perks: Discounts, seasonal events, and a fun, engaged culture., • Supportive Team Culture: We prioritize employee engagement, recognition, and collaboration at every level.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced Quality Manager to establish and scale our Quality Management System (QMS). Your efforts will directly contribute to the organization's success by ensuring that the complex systems we build meet the highest standards of reliability and performance. This role requires a speed & execution mindset coupled with attention to detail.Key Responsibility Areas: • Develop, implement, and manage the company’s Quality Management System (QMS) compliant with relevant ISO standards, • Oversee supplier quality, incoming inspection and in process validation for critical hardware components, • Manage and develop company policies, programs, and procedures for non-conformance, corrective actions, and anomaly investigations, • Work with the Company’s leadership and technical teams to integrate quality checkpoints into the engineering design and manufacturing lifecycle, • Work with the technical teams to ensure proper quality measures are instituted for both hardware and software, • Lead internal audits and facilitate continuous improvement initiatives across cross-functional teamsIdeal Experience & Skillsets:, • 10+ years of relevant work experience in Quality Assurance / Quality Control within aerospace, automotive, or energy sectors, • Past leadership positions and experience managing and growing Quality organizations, • Deep knowledge of ISO 9001, AS9100, NQA-1 or other relevant quality standards, • OSHA 30hr Certification and a strong safety focus, • Excellent oral, written, and interpersonal communication skills, • Ability to work across cross-functional teams to support quality challenges, • Strong ethics and discretionCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Title: Coupa Platform Administrator Duration: 6+ Months (temp to hire) Shift: 8-4:30 (M-F) Pay Rate: $53/hrs. on W2 Location: Philadelphia PA 19106 (Hybrid) Whitehouse Station NJ 08889 (Hybrid) Jersey City, NJ – 07302 (Hybrid) Note: Hybrid- in office 3 days/WFH 2-this schedule will be discussed at interview 3 in office 2 at home Job Description: The Coupa Platform Administrator will be the primary liaison between Global Procurement and Coupa while supporting Procurement goals and initiatives. The Coupa Platform Administrator will also manage supplier relationships as they pertain to Coupa integration, monitor and enforce compliance and manage the escalation process for non-compliance. Coupa Platform Administrator is a specialized position within Global Procurement and will be responsible for maintenance and project management within Coupa. Additional projects are expected to occur and may change frequently as Coupa becomes fully implemented and performing efficiently. This position will require planning and support of: Procurement User enablement Maintenance of approval workflows Configure and enforce buying policies with vendors in Coupa. Maintenance of Chubb locations on the platform Review and report on RFQ and Sourcing events. Design build and Configure reports; Spend Analytics and Procurement Reporting Training and ongoing testing Issue Resolution Supplier Enablement Duties Platform Maintenance and Updates Supplier Compliance General Owner of Coupa and change management as it relates to updates Maintaining production and test instances with most recent configurations Partner with Stakeholders and 3rd Party Provider to achieve organizational management and objectives Develop and facilitate user training as necessary Troubleshoot user concerns involving data, process, configuration or integration related issues Guide system-based activities including user adoption, organizational communications, departmental planning, budgeting, reporting, etc. Supplier Enablement Primary liaison Global Procurement and supplier enablement Coupa Manage, plan approve and support supplier communications. Work with Vendor Management and Third Party Risk to enforce supplier compliance. Requirements Full working knowledge of Coupa (P2P) - preferred 2+ Years procurement experience - preferred 2+ System administration - preferred What happens next: Once you apply, you’ll proceed to the next steps if your skills and experience look like a good fit. But don’t worry—even if this position doesn’t work out, you’re still in our network. That means all our recruiters at Kelly will have access to your profile, expanding your opportunities even more! Helping you discover what’s next in your career is what we’re all about, so let’s get to work. Apply to be a Coupa Platform Administrator) today! #P3 #CB As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Provide technical guidance and equipment selection across standard and custom applications. Application Engineering • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Review technical specifications, drawings, and customer documents to ensure alignment with scope and capability. Project Coordination & Proposal Support • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Track and follow up on opportunities and orders to ensure successful handoff from sale to execution. Customer & Sales Team Development • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Conduct on-site visits, product demonstrations, and technical presentations to deepen customer relationships and close deals. Market & Sales Growth • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Attend tradeshows and industry events to promote solutions and strengthen brand presence. Documentation & Reporting • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job Description COMPANY PROFILE: At WTEC Energy, we help bring power to millions of people and businesses across the United States. Headquartered in Hasbrouck Heights, NJ, we are a leading manufacturer servicing the energy market with locations in 4 states. WTEC Energy is a privately held company committed to providing innovative, sustainable energy products and solutions for today and tomorrow. We service and support diverse markets including: Renewables (Solar and Wind), Electric Utility (Transmission, Substation and Distribution), Oil & Gas (Refineries and Production), Communications (Fiber Optic), Industrial OEM (Wind Turbine) and Petrochemical. WTEC Energy is a Minority Business Enterprise (MBE) that promotes a positive work environment where individual contributions, innovation, and cultural diversity are valued. We are proud to offer competitive compensation and employee benefits with significant career growth potential. COMPANY WEBSITE: http://www.wtecenergy.com Essential duties: • Process Bi-weekly payroll ·, • Create specialized reporting for management. ·, • Report on any payroll discrepancies ·, • Handles employees’ inquiries regarding payroll information. ·, • Maintain records on vacation, sick leave, etc ·, • Process new hires, terminations, salary increases etc. in the payroll system on a timely manner. ·, • Assist HR/Benefit Operations team with other tasks as needed ·, • Process manual checks for state mandated payments, terminations, etc. ·, • Provide back-up support to other Payroll Administrators, as required Qualifications • Bachelor degree required . Accounting is preferred ., • 5-7 years of experience in similar role is required., • Excellent excel skills., • Analytical skills and attention to details., • Excellent communication skills, • Deep understanding of the payroll laws and regulations . Work Environment This job operates in a professional office setting. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines to perform day to day duties and activities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Benefits We offer our employees a competitive salary and benefits package, which includes a comprehensive Medical, Vision, and Dental Plan, Company paid Life and Disability Insurance, 401(k) Plan, and Education/Certification assistance. WTEC Energy is an equal opportunity employer. We recognize the power and importance of a diverse employee population and strongly encourage applicants with various experiences and backgrounds

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role The Safety Supervisor will be responsible for overseeing and ensuring the implementation of safety protocols and procedures within the local organization. Their primary goal is to create a safe working environment for employees and minimize the risk of accidents, injuries, and occupational hazards. The Safety Supervisor will report to the HQ Environmental Health and Safety Manager in leading the safety and health efforts within the company, by supporting the implementation and evaluation of critical safety processes, programs, and procedures to achieve goals, objectives, and continuous improvement related to compliance and injury reduction. Responsibilities • Monitor and maintain compliance with federal & state OSHA, EPA, NFPA, ANSI and other federal and state entity requirements, • Provide relevant content and subject matter expertise to support: required safety-related training; effective implementation of safety programs; and prevention of accidents, • Support site safety goals through implementation of safe work practices and coaching of employees and supervisors in safe practices, • Work in a team environment where responsibility for injury/illness prevention, compliance assurance, safety auditing, incident investigation, and employee training are shared between the leadership team and the EHS supervisor, • Work with the management team and employees to instill a genuine culture of safety awareness and personal responsibility for safe behaviors and work practices, • Assist with employee engagement efforts, including oversight of safety committees, • Provide direct support to employees within the site, with the ability to perform work activities in a variety of industrial and warehouse settings/environments, requiring activities such as, but not limited to: climbing ladders and stairs, walking and standing for long periods of time, working occasionally in hot and cold environments; and wearing advanced PPE such as fall protection and respirators and added clothing, • Daily job includes: Enforcing safety policies; Conducting risk assessments; Training and educating employees; Inspecting, auditing, and monitoring safety practices; Investigating accidents and incidents; Maintaining safety records and documentation; Collaborating with local management; Staying updated on safety regulations and best practices Qualifications • Minimum of 3 years of progressive experience in an environmental health and safety role, • Associate degree in Occupational Safety, Environmental Health and Safety, Industrial Safety, or related field, • Current OSHA 10-Hour General Industry or Construction certification, • Advanced proficiency with Microsoft Office Suite, including Excel (data analysis, pivot tables, formulas), PowerPoint (presentations, training materials), and Word (documentation, reports), • Experience and/or familiarity with related governing agency requirements (i.e., OSHA, NFPA, EPA, DOT), • Demonstrated communicating, training, public speaking and problem-solving skills, • Experience and/or familiarity with powered industrial truck driving (i.e., Forklift, Order-picker, Reach Truck, Electric Pallet Jack), • Experience supporting a Process Safety Management Program, • Knowledge of environmental regulations including but not limited to air, wastewater, storm water, solid and waste management Preferred Qualifications • Bachelor's degree in Environmental Health and Safety, Occupational Safety and Health, Industrial Hygiene, or related field, • Working knowledge of Anhydrous Ammonia refrigeration systems and associated safety protocols Benefits • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • Monthly Weee! Points credits Compensation Range • The US base salary range for this full-time position is $77,000 - $91,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at applicantaccommodation@sayweee.com. For more jobs and to find out more about Weee!, visit our career page: https://about.sayweee.com/careers Softbank Vision Funds California Employee Privacy Policy Intro/FAQ 3.19.2026 Weee! Privacy Policy for California Employees Applicants Contractors (March 2026)

Job Description Bookkeeper / Accountant / Office Administrator Location: Carlstadt, New Jersey Schedule: Monday – Friday | 8:00 AM – 4:00 PM Position Type: Full-Time | In-Office Only (No Remote / No Hybrid) Estimated Start Date: September 1, 2026 Interviewing Immediately Salary Range: $65,000 – $125,000 (based on experience) Benefits: Medical benefits covered 100% by employer Our client is a well-established heavy earthwork, excavation, and site development subcontractor based in Northern New Jersey, specializing in industrial, commercial, and residential site development projects throughout New Jersey. Due to continued growth, they are seeking an experienced Bookkeeper / Accountant / Office Administrator to join their team in Carlstadt, NJ. This position requires a highly organized and detail-oriented professional with strong construction accounting experience and advanced proficiency using Sage Intacct. The ideal candidate will be comfortable working in a fast-paced construction office environment and handling both accounting and administrative responsibilities. Responsibilities • Manage daily accounting and bookkeeping functions for the company, • Handle accounts payable, accounts receivable, invoicing, reconciliations, and general ledger activities, • Maintain accurate financial records and assist with monthly and year-end closing processes, • Process subcontractor and vendor invoices, lien waivers, and payment tracking, • Assist with job costing, project cost tracking, and construction financial reporting, • Coordinate with project managers and ownership regarding project budgets and financials, • Prepare financial reports, spreadsheets, and supporting documentation, • Support office administration and day-to-day operational activities, • Draft, manage, and respond to professional emails and written correspondence, • Maintain organized filing systems and project documentation, • Assist with payroll coordination and employee administrative support, • Communicate professionally with clients, vendors, subcontractors, and internal staff Requirements • Minimum of 5 years of Sage Intacct experience REQUIRED, • Minimum of 5 years of construction accounting experience, • Prior experience working for a construction management firm, heavy civil contractor, excavation contractor, site development contractor, or related construction company strongly preferred, • Strong understanding of:, • Construction accounting, • Job costing, • Project billing, • Vendor and subcontractor management, • Excellent communication, writing, and email correspondence skills, • Highly organized with strong attention to detail and follow-through, • Ability to multitask and prioritize responsibilities in a fast-paced office environment, • Strong proficiency with Microsoft Office Suite including Excel, Word, and Outlook, • Must be dependable and able to work onsite in Rutherford, NJ five days per week, • No remote or hybrid work available Preferred Industry Experience Experience supporting construction projects involving: • Heavy earthwork, • Site excavation, • Underground utilities, • Industrial developments, • Commercial developments, • Residential developments, • Site development construction EQUAL EMPLOYMENT OPPORTUNITIES NorthPoint Staffing, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Job Description:- We are looking to hire an Automation Engineer to assist the Engineering team. The perfect candidate will have experience working on large-scale automation systems and is comfortable writing code from scratch. The Automation Engineer will have responsibility for daily troubleshooting of automation devices such as point level sensors, operator interfaces, networking, burner controllers, conveyors and variable frequency drives. There are multiple projects that the Automation Engineer will be responsible for, such as executing controls upgrades for Coffee Roasters, rewriting the Coffee Transport system and commissioning retrofits to additions to the Transport system. The Automation Engineer will be overseen by two senior level engineers. All new programming at our company is being updated to simplify machine control, reduce operator related errors by standardizing HMI development to ISA-101, incorporate modular programming practices, and integrate with an ERP system, Plex. We uses Rockwell Automation for most automation related equipment, and Ignition Perspective for operator interfaces. Requirements:- Experience building and designing electrical control panels Experience programming industrial control systems and operator interfaces Self-motivated, works well independently or as part of a team, and expresses genuine curiosity in their role. Strong attention to detail and problem-solving skills Must be comfortable working in a production environment, supporting system uptime, and troubleshooting. Possibility of working late and working weekends. Personnel will be required to learn the intricacies of our coffee process before they are able to start on projects. Must have a Bachelor's Degree in Engineering or like field. Must have 3-5 years of industry experience. Tools to be Used:- Studio 5000 Logix Designer Ignition Perspective FactoryTalk View SE/ME Microsoft Suite (Excel, Visio, etc.) Benefits: 401(k) Dental insurance Flexible spending account Health insurance Health savings account Paid time off Vision insurance Work Location: In person Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced, highly motivated Facilities Manager to oversee the physical infrastructure required to build the future of fusion energy. This candidate will interact with the Company’s leadership, finance & operations, and technical teams to ensure our labs, production floor, and offices are safe, efficient, and scalable. This role will have a high degree of autonomy, and the ideal candidate must be able to move quickly to support our rapid growth.Key Responsibility Areas: • Manage day-to-day facility operations including building maintenance, HVAC, electrical, and plumbing systems for both office and high-tech lab environments, • Ensure all equipment is maintained, with preventative maintenance plans in place for all critical assets, • Plan and execute facility modifications and expansions to support hiring and installation of manufacturing and test equipment, • Manage vendor relationships, service contracts, and facility budgets, • Develop expansion plans to account for company growth, working with real estate brokers and negotiating leases for additional space, • Coordinate with other organization stakeholders to ensure compliance with all local, state, and federal building codes and safety regulations, • Manage and develop company policies, programs, and procedures regarding space planning and asset management, • Lead space allocation planning for a growing teamIdeal Experience & Skillsets:, • 7+ years of relevant work experience in facilities management, preferably in an R&D, or manufacturing environment., • Experience managing complex electrical infrastructure and laboratory / manufacturing build-outs., • Experience with high vacuum systems, • Proven organizational skills with the ability to manage multiple projects and priorities, • OSHA 30hr Certification and a strong safety focus, • Ability to thrive in a fast-paced, dynamic startup environment., • Ability to find creative solutions to physical infrastructure problems., • Excellent negotiation, communication, and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Manufacturing Applications Engineer – Industrial Manufacturing Our client, a leading company in the industrial manufacturing sector, is seeking a detail-oriented and customer-focused Manufacturing Applications Engineer. This is a unique opportunity to join an innovative team and play a pivotal role in supporting customers, distributors, and internal stakeholders with expert technical solutions. If you are passionate about engineering applications and thrive in a fast-paced environment, this is an exceptional opportunity to make an impact in a respected manufacturing organization. • Serve as the initial point of contact for technical assistance concerning manufactured products, providing expert support to customers and distributors., • Analyze customer use cases for products, recommend tailored solutions, and offer guidance based on in-depth product and application knowledge., • Respond to technical inquiries, collaborating with internal teams for comprehensive solutions when required., • Manage and process customer requests for formal price quotations, lead times, order placements, changes, and cancellations., • Build and maintain strong customer and distributor relationships, ensuring high levels of satisfaction and repeat business., • Expedite and trace shipments by coordinating with production, sales, shipping, and logistics partners, proactively following up on outstanding inquiries., • Provide price and delivery quotations for standard products and refer customers to designated distributors as appropriate., • Assist customers in selecting optimal products for their specific needs and maintain accurate records in the sales contact management system., • Support the Vice Presidents of Engineering and Sales/Marketing through collaborative initiatives and feedback., • Offer feedback to engineering teams on potential new products or enhancements based on customer insights., • Participate in relevant industry trade associations and travel as necessary to attend events and meet client needs., • As needed, fulfill duties similar to a Customer Service Representative to ensure seamless customer experience. Requirements: • Bachelor’s degree in Engineering, Manufacturing, or a related technical field required., • Ability to read and interpret technical drawings and specifications., • Proficiency in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint)., • Exceptional verbal and written communication abilities., • Advanced mathematical competency, including statistical and financial analysis skills., • Strong analytical problem-solving capabilities and the ability to address complex challenges.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: This role is ideal for an engineer who is comfortable wearing many hats, solving urgent production issues, and working directly with toolmakers, CNC machinists, quality personnel, and production teams. The successful candidate will act as a technical problem-solver on the manufacturing floor, with a strong focus on progressive tooling, CNC manufacturing methods, root-cause analysis, quality improvement, and production support. This is not a desk-only engineering role. The position requires someone who can move between engineering, quality, the tool room, and production to identify problems, develop practical solutions, and keep manufacturing running efficiently. Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Requirements: Key Responsibilities: 1. Manufacturing & Production Support: • Provide hands-on engineering support for day-to-day production issues., • Troubleshoot manufacturing problems related to tooling, CNC machining, part quality, and process stability., • Work directly with operators, toolmakers, machinists, and production supervisors to resolve urgent shop-floor issues., • Evaluate production methods and recommend improvements to increase efficiency, repeatability, and throughput., • Support corrective actions when production parts do not meet dimensional, cosmetic, or functional requirements., • Assist with setup optimization, process validation, and manufacturability improvements. 1. Tooling & Tool Room Support: • Support the tool room with troubleshooting and improvement of progressive tooling and related production tooling., • Assist in identifying tooling wear, failure modes, alignment issues, and design-related problems., • Recommend tool modifications, repairs, or process changes to improve part quality and tool life., • Collaborate with toolmakers to develop practical solutions for active production problems., • Review tooling designs and provide engineering input for improvements, maintenance, and manufacturability. 1. CNC & Manufacturing Engineering: • Help determine effective CNC machining approaches for production components, tooling, fixtures, and secondary operations., • Work with CNC machinists/programmers to improve machining strategy, fixturing, tooling selection, and process reliability., • Support fixture design, tooling concepts, and process development for machined components., • Analyze machining-related issues such as tolerance variation, tool wear, chatter, setup errors, and cycle-time inefficiencies., • Recommend improvements to CNC processes that support quality, cost, and delivery goals. 1. Quality Control & Continuous Improvement • Apply quality control experience to investigate dimensional issues, nonconformances, and customer concerns., • Support root-cause analysis and corrective/preventive action activities., • Use inspection data to identify trends and recommend engineering or process changes., • Work with Quality Control to ensure parts meet drawings, specifications, and customer requirements., • Assist in developing or improving inspection methods, control plans, work instructions, and process documentation., • Promote practical continuous improvement initiatives across engineering, tooling, CNC, and production 1. Documentation & Cross-Functional Communication: • Read and interpret engineering drawings, tolerances, specifications, and manufacturing documentation., • Create or revise work instructions, process notes, inspection criteria, and engineering documentation as needed., • Communicate clearly with shop-floor personnel, quality staff, engineering, and management., • Document technical findings, corrective actions, and recommended process improvements., • Support engineering change activities when tooling, process, or product updates are required. Non-Essential Responsibilities: • Performs other duties as directed. Position Qualifications And Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others, • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills And Abilities: Required Qualifications: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related technical field preferred., • Equivalent hands-on manufacturing, tooling, CNC, or quality experience may be considered., • Experience in a manufacturing environment with direct shop floor involvement., • Working knowledge of progressive tooling, tool room operations, CNC machining, and production troubleshooting., • Quality control experience, including inspection methods, dimensional analysis, and corrective action support., • Ability to read and interpret mechanical drawings, GD&T, tolerances, and technical specifications., • Strong mechanical aptitude and practical problem-solving ability., • Comfortably working in a fast-paced production environment and responding to urgent issues., • Ability to communicate effectively with machinists, toolmakers, inspectors, operators, and management., • Proficiency with Microsoft Office and basic engineering documentation. Preferred Qualifications: • Experience with stamped, coined, precision metal, or small-component manufacturing., • Experience supporting progressive dies, punch tooling, fixtures, jigs, and production tooling., • CNC machining knowledge, including milling, turning, tooling selection, fixturing, and setup troubleshooting., • Familiarity with CAD software such as PTC Creo, AutoCAD, or similar., • Knowledge of GD&T and precision inspection equipment., • Experience with root-cause analysis tools such as 5 Why, fishbone diagrams, corrective actions, and process audits., • Exposure to ISO 9001, AS9100, IATF, or similar quality systems., • Experience in a high-mix, fast-paced manufacturing environment. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description Manufacturing Maintenance Engineer Essex County, NJ • Lead advanced troubleshooting and repairs of mechanical, conveyor and electrical issues, • Partner with maintenance technicians to execute preventive and predictive maintenance strategies., • Identify and implement opportunities for process improvements to enhance equipment reliability and operational efficiency., • Collaborate closely with production teams to support day-to-day operations and ensure rapid resolution of equipment-related concerns., • Conduct root cause analyses on recurring problems and engineer long-term, sustainable solutions., • Assist with the installation, commissioning, and integration of new manufacturing equipment., • Maintain thorough documentation of maintenance activities within the computerized maintenance management system, • Mentor and provide technical support to maintenance technicians to enhance their troubleshooting skills and equipment knowledge., • Perform additional duties as assigned to support the maintenance and engineering teams. Requirements: • Bachelor’s degree in Engineering, • 2 years of experience in maintenance engineering, preferably within a manufacturing or industrial environment.

Job Description Title: Supply Chain Management Data Analyst Location: Teaneck, NJ Fluent in both Korean and English Position Summary: Hanwha Vision America (HVA) is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals including retail, transportation, education, banking, healthcare, hospitality and airports. Hanwha Vision America is seeking a Supply Chain Management Data Analyst who will be is responsible for analyzing, monitoring, and optimizing supply chain operations to improve service levels, inventory management, forecasting accuracy, and overall operational efficiency. This role supports demand planning, inventory analysis, S&OP, logistics cost review, operational reporting, and cross-functional decision-making. The SCM Data Analyst will work closely with Sales, Procurement, Logistics, Operations, Finance, U.S.-based teams, and Korea-based headquarters teams to support supply chain planning, procurement coordination, inventory management, and operational reporting across global business functions. The ideal candidate will have strong analytical skills, attention to detail, bilingual communication ability in Korean and English, and the ability to translate complex data into actionable business insights. Responsibilities: Supply Chain Planning & Analysis • Support weekly and monthly rolling forecast processes by consolidating demand signals, identifying supply chain risks, and providing actionable insights to internal stakeholders., • Analyze supply chain performance metrics, including demand forecasts, order fulfillment, inventory levels, lead times, backorders, and supplier performance., • Identify trends, risks, and opportunities to improve service levels, inventory utilization, and operational efficiency., • Conduct root cause analyses for supply chain disruptions and provide recommendations to improve planning performance., • Communicate key findings, risks, and recommendations clearly to management and cross-functional teams. Inventory Management • Monitor inventory by reviewing sell-in, sell-out, open orders, inventory coverage, remaining inventory months, and consumption trends., • Analyze inventory turnover, inventory days on hand, aging inventory, excess and obsolete stock, and replenishment requirements., • Recommend actions to optimize stock availability while minimizing excess inventory and carrying costs., • Collaborate with Procurement, Warehouse, Logistics, and Sales teams to maintain inventory accuracy and availability. Logistics Cost Optimization • Analyze freight spend and identify opportunities to reduce transportation costs while maintaining service levels., • Evaluate and recommend transportation modes based on cost, lead time, inventory availability, and customer requirements. Demand Forecasting • Develop, review, and maintain item-level demand forecasts using distributor purchase order history, open orders, POS data, channel inventory, and market insights from the Sales team., • Analyze demand fluctuations, forecast accuracy, sales trends, inventory levels, backorders, and excess inventory risks to support data-driven decision-making by senior management., • Monitor forecast accuracy, demand variability, forecast bias, and baseline forecast models such as moving average, trimmed average, and historical trend analysis., • Support weekly and monthly forecasting reviews with cross-functional stakeholders., • Partner with third-party machine learning forecast providers to support forecast improvement initiatives and evaluate forecast outputs against historical demand, POS, channel inventory, and statistical baseline models. Reporting & Process Improvement • Extract, organize, analyze, and present supply chain data using SAP, Excel, Power BI, and other analytical tools., • Prepare recurring and ad hoc reports for management and key stakeholders., • Develop, maintain, and improve supply chain reports, dashboards, and key performance indicators., • Participate in continuous improvement initiatives focused on process efficiency, automation, reporting accuracy, and cost reduction., • Assist with reporting enhancements, and data integrity initiatives. Qualifications: • Bachelor's degree in Supply Chain Management, Business Administration, Operations Management, Industrial Engineering, Finance, Economics, or a related field., • 2-5 years of experience in supply chain, operations, logistics, inventory planning, procurement, or data analytics., • Experience working with ERP systems such as SAP, Oracle NetSuite, Microsoft Dynamics 365, or similar platforms preferred., • Experience in the electronics, technology, security, or surveillance industry is preferred, with familiarity in global supply chain operations and inventory planning considered a strong advantage., • Advanced proficiency in Microsoft Excel, including Pivot Tables, VLOOKUP/XLOOKUP, Power Query, and data analysis., • Experience with business intelligence and reporting tools such as Microsoft Power BI or Tableau., • Strong analytical and quantitative problem-solving abilities., • Understanding of supply chain processes, inventory planning, forecasting, procurement, and logistics., • Experience with ERP systems and supply chain reporting tools., • Fluent in both Korean and English. Preferred Qualifications: • Professional certification such as Certified Supply Chain Professional (CSCP) or Certified in Planning and Inventory Management (CPIM) from ASCM., • Experience with SQL, database management, or advanced analytics tools., • Knowledge of demand planning and forecasting software., • Experience supporting global supply chain operations and international supplier relationships. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required. All personnel may be required to perform duties outside their normal responsibilities from time to time as needed.

Job Description About the Role A bakery franchise company headquartered in Fort Lee, NJ is hiring a Senior Bakery Training Specialist. This role leads pre-opening training for new franchise stores, covering product preparation, quality control, and store operations to ensure a successful launch. You will also deliver foundational training for internal employees, manage training center operations, and develop training curricula and materials. The position combines hands-on bakery expertise with training delivery and program development. Requirements Key Responsibilities Training Delivery • Deliver comprehensive pre-opening training for new franchise store owners and employees, covering product preparation, quality control, and store operations., • Train store teams on product sales, customer service, and both manual and new products., • Provide instruction on hygiene, frozen dough management, and store quality control., • Train on the proper use and maintenance of kitchen equipment. Training Center Operations • Establish and manage training schedules and operational plans., • Ensure industrial safety and food safety compliance at the training center., • Manage training center expenses, inventory, procurement, and purchase orders. Curriculum & Documentation • Develop and update training curricula, manuals, presentations, and guidelines., • Prepare and manage training documents and reports., • Conduct post-training evaluations (surveys, feedback) and analyze training effectiveness., • Plan, design, and continuously improve training programs. Product R&D & Equipment • Provide product training for new products., • Conduct foundational training for new internal employees., • Develop and test new equipment and small tools. Required Qualifications • Prior bakery experience., • Knowledge of baking multiple types of bread, and baking and decorating cakes., • Associate or bachelor's degree, or equivalent years of work experience., • 1-2 years of combined experience with food or ingredients and manufacturing., • Knowledge of GMP and HACCP., • Basic understanding of food production fundamentals., • Korean/English bilingual., • Proficiency in MS Office (Outlook, Word, Excel, PowerPoint)., • Strong verbal and written communication, including the ability to write reports and business correspondence., • Ability to read and interpret procedure manuals and regulatory documents., • Ability to present information and respond to management-level questions., • Detail-oriented with strong record-keeping skills, able to manage multiple priorities with minimal supervision. Preferred Qualifications • Research and development (R&D) experience in the bakery industry. Benefits Compensation & Benefits • Salary: $90,000 - $120,000 per year, • Medical, dental, vision, and life insurance, 100% company-covered from Day 1, • Short-term and long-term disability (short-term 100% covered), • 401(k) with 5% match, no vesting period, from Day 1, • Free onsite lunch catering or daily lunch allowance through payroll, • $50 monthly gym reimbursement, • Cellphone reimbursement, • Employee discounts (40% off products and services), • Paid time off (generous, increases by tier), • 40 hours of paid family leave each year (family care or volunteer trip), • Paid maternity leave (100% paid for 12 weeks), • Paid secondary caregiver leave (up to 2 weeks), • Paid creative leave (up to 2 weeks, based on years of service), • 11 paid holidays, • Talent sharing opportunities, • Employee club activities (movie, e-sports, book, sports, and more) Location & Schedule • Onsite in Fort Lee, NJ., • Full-time.

Job Description At Cibo Vita, innovation drives everything we do. Based in Totowa, NJ, we craft premium healthy snacks under the Nature’s Garden brand, combining quality ingredients with creative flavor and function. Our products are designed to support wellness, sustainability, and better snacking choices-helping consumers “Snack With Purpose.” Job Summary: The Engineering Mechanic Supervisor will be responsible for supervising and supporting the engineering mechanics team to optimize manufacturing processes, ensure the seamless operation of equipment, and maintain safety and quality standards. This role requires strong technical expertise, leadership capabilities, and hands-on experience in troubleshooting, maintenance, and continuous improvement initiatives to enhance productivity and efficiency across all stages of production. Key Responsibilities: · Supervise and support the engineering mechanics team to maintain a safe, efficient, and reliable production environment. · Oversee the installation, maintenance, and repair of manufacturing equipment, ensuring minimal downtime and maximum productivity. · Implement and optimize process improvements that enhance product quality, reduce waste, and increase overall manufacturing efficiency. · Collaborate with cross-functional teams, including Production, Quality Assurance, and Research & Development, to troubleshoot and resolve technical challenges. · Develop and execute a preventative maintenance program for all critical machinery and systems · Ensure compliance with all local, state, and federal regulations related to food safety, equipment standards, and environmental concerns. · Supervise capital improvement projects, including equipment upgrades, process changes, and system enhancements, from planning to execution. · Provide technical training and mentorship to engineering mechanics and plant personnel to improve skill sets and knowledge across the team. · Monitor and support engineering-related budgets, ensuring cost-effective solutions for equipment and process upgrades. · Drive innovation in automation, data analysis, and lean manufacturing practices to enhance the company’s manufacturing capabilities. · Evaluate and recommend new technologies and practices that can improve operational efficiencies and product quality. Qualifications: · Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, or related field) preferred; equivalent hands-on technical experience considered. Requirements: · 5+ years of experience in engineering, maintenance, or mechanic supervisory roles within a food manufacturing or similar industrial setting. · Strong knowledge of food production processes, machinery, and food safety regulations. · Proven track record supervising maintenance or engineering mechanic teams and managing technical projects. · Expertise in process optimization, lean manufacturing, and continuous improvement methodologies. · Solid understanding of electrical, mechanical, pneumatic, hydraulic, and automation systems used in manufacturing. · Excellent troubleshooting and problem-solving skills, with a focus on practical and efficient solutions in a fast-paced environment. · Strong communication skills and ability to collaborate with cross-functional teams at all levels. · Proficiency in engineering design software (AutoCAD, SolidWorks, etc.) and Manufacturing Execution Systems (MES) is a plus. · Project management experience with the ability to handle multiple priorities and deadlines. · Experience with sustainability practices and a passion for food industry advancements is highly desirable. What do we offer: · Medical, Dental and Vision Benefits · Life Insurance · 401K · PTO · Company Paid Holidays · Career advancement and training

Job DescriptionDescription: Overview A Building Automation Sales Representative is responsible for promoting and selling building automation systems and solutions to commercial, industrial, and institutional clients. They work closely with clients to understand their needs, provide tailored solutions, and ensure customer satisfaction. This role involves a combination of technical knowledge, sales skills, and customer relationship management. Key Responsibilities: Sales and Business Development: • Identify and target potential clients in the commercial, industrial, pharmaceutical and institutional sectors., • Develop and maintain relationships with key decision-makers and stakeholders., • Partner with engineering firms to be the controls provider of choice., • Conduct market research to identify new business opportunities and stay updated on industry trends. Technical Consultation: • Understand clients' building automation needs and provide customized solutions., • Incorporate energy saving solutions with our delivery., • Collaborate with engineering and technical teams to design and propose appropriate systems., • Conduct product demonstrations and presentations to showcase the benefits of building automation solutions. Customer Relationship Management: • Manage the entire sales process from lead generation to closing deals., • Provide ongoing support and follow-up to ensure customer satisfaction and retention., • Address customer inquiries, concerns, and feedback promptly and professionally. Sales Reporting and Documentation: • Maintain accurate records of sales activities, customer interactions, and project details using Sales Force., • Prepare and submit sales reports, forecasts, and other documentation as required., • Monitor and report on sales performance and progress towards targets. Work Environment: • This role typically involves a combination of office work and field visits to client sites., • Travel may be required to meet with clients and attend industry events or conferences. We offer a competitive benefits package including: • PTO, • 401(k) Matching, • 9 Paid Holidays, • Bonus Plan, • Company truck/fuel card, • Employee Referral program, • 8-hour Shift, overtime available, • EAP/Wellness Program, • Health/Dental/Vision Insurance, • Trainings If you are a self-motivated individual with a passion for providing exceptional HVAC services, we encourage you to apply for this position. Come join a winning team while working for a company with whom you can retire from! Requirements: Qualifications: • Bachelor's degree in Business, Engineering, or a 10 years of job experience., • Proven experience in sales, preferably in building automation or a related industry., • Strong technical knowledge of building automation systems and solutions., • Excellent communication, negotiation, and presentation skills., • Ability to work independently and as part of a team., • Proficiency in Microsoft Office Suite. Skills and Competencies: • Technical Aptitude: Understanding of building automation technologies and their applications., • Sales Skills: Ability to identify opportunities, develop strategies, and close deals., • Customer Focus: Commitment to providing excellent customer service and building long-term relationships., • Problem-Solving: Ability to analyze client needs and propose effective solutions., • Time Management: Efficiently manage multiple tasks and prioritize workload.