Inspector jobs in Irvington, New JerseyCreate job alerts

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: • To verify property occupancy. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities • Most common type of inspection should only take 5-6 minutes., • Complete the inspection within 4 days after it is assigned., • Report general property conditions and make a determination of occupancy based on industry standards., • Take 9+ photos of the property with brief comments., • Complete a short form in an app., • Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory.Requirements (to be considered you must have the following):, • Computer with an internet connection, • Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas), • Smartphone (Android or iPhone), • Printer Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR S6aoZW0G7a

Job Description Join a Leader in Precision Engineering Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors. As one of the largest providers of fluid control products, our legacy is built on precision, reliability, and innovation. We're currently looking for a Mechanical Inspector to join our quality team. If you have a mechanical mindset, strong attention to detail, and enjoy working in a hands-on environment—this is the role for you! Under general supervision, the Inspector position requires the mechanical ability to perform first piece and sample inspection. Using standard inspection equipment, solves standard inspection problems and lays out of complicated parts, casting, and assemblies. Makes decisions concerning minor inspection problems, using complicated blueprints and specifications. ESSENTIAL FUNCTIONS • Read and Comprehend complicated blueprints, sketches, written and/or verbal specifications., • Proficient in the use of mechanical inspection equipment; including micrometers, gages, go/no gages, optical comparator, CMM and other inspection measuring tools., • Accurately document the results of the inspections and other data., • May be Level I Operator or Level II Inspector in one or more liquid penetrant, ultra-sonic or eddy currents., • Under direct supervision, may assist in the calibrating of gauges., • Moves parts and materials to and from work area., • Must pass required eye tests, and will be subject to the random drug and alcohol testing program., • Follow company policies (Safety, Attendance, etc.), and maintains a clean well-organized work area., • Can easily accept direction and complete tasks in a timely manner with minimal supervision., • Inspectors may also be assigned additional tasks or projects as required by management. MINIMUM QUALIFICATIONS • Requires a high school diploma or equivalent, advanced technical education preferred., • Inspection experience and working knowledge of measurement instruments required., • Aerospace and or Nuclear industry experience beneficial., • Good written/verbal communication skills and Inter-acts with organizational team members and other departments in a professional manner., • Advanced mechanical aptitude desired., • Good arithmetic skills are required and experience with the use of standard shop math, limited trigonometry, and a full knowledge of machine shop and assembly operations is beneficial. Why Join Valcor Engineering? • Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy., • Team-Focused Culture: Work with a skilled, collaborative group of industry pros., • Career Growth: Opportunities to develop and move up in a growing company., • Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast region. Our mission is to make car washing an energizing experience for everyone. We are focused on becoming the premier brand in the market by providing consistent excellence to our customers and an enriching environment to our employees. Spark is in the process of launching multiple new locations with a vision of becoming the largest chain in the market by 2027. Our team is ambitious, and we strive to give every car a clean owner and every employee a fulfilling career. You would be joining an innovative brand with lots of potential for growth. Your role is to greet our customers in a kind and professional manner that adds a smile to their day and provides a safe, fast, friendly experience while ensuring a clean, well-maintained facility. In addition, you will receive cross training in other duties and procedures so that you can grow your skill set and assist in other roles. Car Wash Associates are paid hourly plus commission on their membership sales when working at the XPT station. What you will be doing: • Be the friendly face of Spark, offering customers a smile and prompt service, • Advise our guests on their purchases and let them know about the amazing deals and free amenities that we offer. Car wash associates are compensated for each membership sold, • Identify opportunities to improve our customer service – we love hearing new ideas, • Control traffic flow and pedestrian safety, ensuring correct vehicle processing is followed, • Take charge of keeping the car wash, the grounds, and the restrooms clean, tidy and well-stocked. You will be a mean mopper, a swift trash gatherer, a whiz at unclogging vacuums and a pro at cleaning the pit to ensure everything runs smoothly., • Be the eagle-eyed vehicle inspector at the tunnel entry, checking cars are entering safely, • and removing excess dirt and debris, • The Car Wash Associate position is a significant role at Spark – you’re the face of our brand. You’ll be good with people and have a real sense of pride in your work, • Spark is a fast-paced, dynamic environment – we are looking for someone who can follow instructions but also work independently with great time management skills, • We are looking for a candidate who loves interacting with people, • We are looking for a candidate with great attention to detail – someone who can spot a problem quickly, • Because we are growing, we are interested in candidates who also love to be curious, to learn, and to grow Physical Requirements/Working Conditions: • The position requires the ability to perform physical activities that require considerable use of your hands, arms and legs and moving your whole body, such as walking, standing, bending, stooping, and handling of tools/materials as well as lifting up to 50 lbs, • The position requires the ability to see details at close range (within a few feet of the observer), • Competitive salary with performance-based incentives, • Comprehensive health, dental, and vision insurance, • Retirement savings plan with company match, • Paid time off and holidays, • Free Car Washes

A company is looking for a Coating Utility I Inspector.

Job Description Firm looking for qualified MBE/WBE/SDVOB subconsultants to join our team in providing eligible candidates for work in the Port District. Concrete field/asphalt plant inspector Experience/Certification Level required: • ACI Concrete Field Testing Technician – Grade I, • NJSAT Asphalt Plant Level 1 & 2, • Radiation Safety-Nuclear Density Gauge Certified, • Efficient in the Marshall Method – ASTM C6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus, • Perform AASHTO Resource Annual Accreditation equipment calibrations., • Efficient in preparing samples for ASTM C4867 - Standard Test Method for Effect of Moisture on Asphalt Mixtures, • Able to cut asphalt cores and prepare for bulk specific gravity of in place densities in accordance with ASTM D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive, • OSHA 10, • OSHA 30 Concrete field inspector/lab technician Experience/Certification Level required: • ACI Concrete Strength Testing Technician, • ACI Concrete Field Testing Technician – Grade I, • ACI Aggregate Base Testing Technician, • NJSAT HMA Construction Technologist, • Knowledge of AASHTO Resource Annual Accreditation for equipment calibration., • AASHTO Resource CCRL- Rebar measurements., • Knowledge of Portland cement testing, • Efficient in performing ASTM C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration., • Efficient in performing ASTM C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, • Efficient in performing ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, • Efficient in performing ASTM C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, • OSHA 10, • OSHA 30

Job Description Position Overview: A hybrid role encompassing depot and safety responsibilities that provides support to depot, safety, and operations by conducting or facilitating the inspection, maintenance and repair of terminal facilities and equipment. Essential Depot Functions • Inspect equipment and note any damage, • Inputs data into the Depot computer system, • Coordinate maintenance, repair, and driver inspection reports for company truck fleet, • Visually inspect vehicles to ensure any vehicle maintenance violations are corrected, • Complete daily lot checks observing security breaches, damaged equipment, etc, • Communicate issues with staff or drivers to management, • Correct and update system with correct unit numbers or units needing to be placed on hold, • Coordinate with other terminal employees and outside contractors as needed to complete tasks efficiently, • Operate various types of yard equipment (lifts, yard tractor, etc.) Essential Safety Compliance Functions • Partner with Safety to Install or remove in-vehicle camera and gateway, • Apply or remove vehicle decals, • Conduct in-house vehicle inspections, • Complete company-owned chassis inspections & ensure FHWA’s are current, • Coordinate installation of fixed safety-related communications or equipment, • Assist with on-site emergency response to accidents/incidents on premises, • Conduct new hire driver yard driving assessments, as needed, • Perform required inspections of equipment and machinery to ensure proper function, identify, and communicate any potential hazards Job Requirements • Ability to work flexible hours in demanding physical conditions, including exposure to extreme temperatures and heavy equipment, • Ability to conduct CMV driver safety and operations instruction and training, • Skill to operate handheld tools and knowledge to complete basic maintenance projects, • Valid driver’s license, • Possess basic knowledge of workplace safety, fleet maintenance, and transportation regulations Other Skills/Abilities • Professional Communications - electronic, e-mail and in person, • Possess office skills, such as scanning, MS Office suite, using 3rd party web programs, picture transfer/uploading, • Data entry, document processing, • Respond to and send emails as an essential communications tool, • Support additional projects that arise in the depot or other duties as assigned

Job Description ARMStrong Insurance Services is the leading and most trusted name in the world of debt recovery and financial solutions. With a track record of excellence and reliability, we have proudly served businesses across various industries for decades, ensuring efficient B2B collections and tailored debt recovery solutions. As the parent company, ARMStrong is proud to own and operate Brown & Joseph, Paragon, SubroIQ, and NEIS each a powerhouse in their own right, providing specialized expertise in debt management and financial services. NEIS is currently looking for Loss Control Field Inspectors to join our team!!! Loss Control Field Inspectors conduct insurance loss control inspections on either commercial or residential dwellings. This is a Part-Time/Occasional Job Hours can vary from week to week but you make your own schedule**. Job Responsibilities: • Conduct physical inspections on either commercial or residential properties., • Apply manual rules and company standards to find possible risks to reduce the chance of accidents, • Prepare a schedule to maximize optimal use of time and to ensure time service is met, • Correspond with insured via phone, email and text message as necessary to set up appointments, • Complete a physical loss control survey to identify any current issues or hazards, • After physical inspection is completed, prepare required reports to which includes multiple pictures, • Competent use of digital camera, word processing and e-mail, • Valid driver’s license and satisfactory driving record (based on NEIS guidelines), • Must live within 30-mile radius of territory, • Job will be based from home with required travel to each inspection location within your assigned territory, • Compensation is roughly $50 and up per inspection (depends on the job and location), • On the job training, • Base pay - paid weekly, • Mileage Reimbursement - paid weekly, • Production pay - paid weeklyWe look forward to you joining the team! ARMStrong Insurance Services is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Powered by JazzHR nBTUQJ0Xpt

Job Description About Tonix* Tonix is a fully integrated biotechnology company, publicly traded on NASDAQ (ticker: TNXP), with marketed products and a pipeline of development candidates The Company is focused on commercializing, developing, discovering, and licensing therapeutics to treat and prevent human disease. In August 2025, Tonix received FDA approval for Tonmya™ (cyclobenzaprine HCl sublingual tablets), a first-in-class, once-daily, non-opioid treatment for fibromyalgia. Tonmya is the first new fibromyalgia therapy approved in over 15 years, following successful Phase 3 trials demonstrating significant symptom improvement. Commercial launch is expected in the fourth quarter of 2025. Tonix also markets Zembrace® SymTouch® (sumatriptan injection) 3 mg and Tosymra® (sumatriptan nasal spray) 10 mg, both indicated for the treatment of acute migraine with or without aura in adults. Tonix’s development portfolio includes product candidates in central nervous system (CNS), immunology, immuno-oncology infectious disease and rare disease. The CNS pipeline features both small molecules and biologics to treat pain, neurologic, psychiatric, and addiction conditions. The immunology portfolio includes biologics to address organ transplant rejection, autoimmunity, and cancer. The infectious disease pipeline includes a vaccine in development to prevent smallpox and monkeypox, which also serves as a live virus vaccine platform for other infectious diseases. Finally, the rare disease portfolio includes a product in development for Prader-Willi syndrome, which has both orphan drug designation and rare pediatric disease designation grants from the FDA. Tonix owns and operates a state-of-the art infectious disease research facility in Frederick, Md. Please visit for specifics on the pipeline. *All of Tonix’s product candidates are investigational new drugs or biologics and have not been approved for any indication. Position Overview The Director, Compliance reports to the Head of Commercial Legal and Compliance and supports the function in developing, implementing, and maintaining an effective Compliance Program that (1) supports and promotes a companywide culture of ethics and compliance, and (2) meets or exceeds applicable regulatory standards for effective compliance programs, including the Office of Inspector General (OIG) Guidance. Essential Functions • Assume primary responsibility for all compliance policies and educating business stakeholders in their application; Working collaboratively, draft, implement, administer and maintain relevant compliance policies, procedures, work instructions, and training programs., • Assist with providing strategic direction across all OIG seven elements of an effective compliance program leveraging knowledge of industry best practices., • Manage and implement compliance guidance related to engagements with healthcare professionals, as well as policies related to clinical studies, sponsorships, and grants., • Lead the development, implementation, and ongoing oversight of federal and state transparency reporting programs, including Open Payments (Sunshine Act) and state-specific disclosure requirements. Ensure timely and accurate data collection, validation, and submission in alignment with regulatory expectations and internal compliance standards. Collaborate cross-functionally with Legal, Finance, Medical Affairs, and Commercial teams to build scalable systems and processes that support transparency, mitigate risk, and promote ethical business practices., • Assist with designing, implementing, and overseeing a comprehensive compliance monitoring program to assess adherence to internal policies, regulatory requirements, andindustry standards. Lead risk-based monitoring activities across key business functions, including Commercial, Medical Affairs, and Market Access, to proactively identify and mitigate compliance risks. Develop actionable insights from monitoring outcomes, drive continuous improvement, and ensure timely reporting and remediation in collaboration with cross-functional stakeholders., • Maintain a current working knowledge of various laws, regulations, and industry guidance that affect the compliance program, including antikickback and fraud and abuse laws, bribery and corruption, transparency laws, price reporting, OIG and DOJ guidelines, and industry standards, such as the PhRMA Code., • Experience managing compliance programs, including drafting policies, implementing training standards, undertaking monitoring initiatives, and conducting investigations on sensitive matters., • Ability to apply a risk-based analysis to legal and compliance issues and develop creative and practical solutions that satisfy both business requirements and legal obligations, • Ability to manage and assist in the implementation of technical solutions to manage the HCP engagement processes., • Communicates complex compliance concepts effectively to the organization in a way that is connected to business objectives., • Strong oral, written and presentation communication skills with superior attention to detail., • Demonstrates initiative and excellent judgment; proactive; ability to work independently and collaboratively within a team setting; able to build relationships, both internally and externally., • Bachelor’s degree at minimum, • 8+ years (with a B.S. degree), or 6+ years (with a graduate degree) of recent, relevant in-house experience in a compliance or related department of a healthcare organization or directly applicable law firm experience Annualized base salary ranges from $190k to $240k plus target incentive; actual salaries will vary and may be above or below this range commensurate with several factors including experience, education, training, location, and merit. Tonix provides a comprehensive compensation and benefits package which includes: • Medical, Dental & Vision Insurance, Basic and Voluntary Life and AD&D Insurance, Short- and Long-Term Disability Insurance, Flexible Spending Accounts, Health Savings Account, and Employee Assistance Programs, • Pet Insurance, • Retirement Savings 401k with company match and annual discretionary stock options, • Generous Paid Time Off, Sick Time, & Paid Holidays Tonix does not accept agency resumes unless contacted directly by internal Tonix Talent Acquisition. Please do not forward resumes to Tonix employees or any other company location; Tonix is not responsible for any fees related to unsolicited resumes. Tonix provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, genetics, or any other characteristic protected by law. In addition to federal law requirements, Tonix complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, and training. Tonix expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic, information, disability, veteran status, or any other characteristic protected by law.

Job DescriptionSalary: $83,200-$99,840 annual base salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector with a NICET II certification to join our growing Transportation & Infrastructure Division. In this role, you will be responsible for overseeing and inspecting bridge construction and/or bridge substructure repair near Newark, NJ, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role may also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. Appointment to this position is subject to client review and approval. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: • Conduct regular on-site inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary, and daily records of the numbers and classifications of workers employed by contractors., • Maintain daily records covering running totals of quantities and costs while construction is in progress., • Prepare and forward weekly quantity summaries for items associated with the contract., • Assist in the development and implementation of quality control procedures., • Review traffic protection procedures., • Attend meetings and conferences as needed. Who you are: • Required, • Certified by NICET as a Transportation Engineering Technician (NICET Level II), • Note: NICET Level III will also be considered for this role. Compensation is negotiable., • 5+ years of experience in construction inspection, with a focus on transportation infrastructure projects., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license and willingness to travel to various project sites within New Jersey and NYC Metro Area., • Preferred, • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • NJSAT, NACE, ACI Grade-I and TCC/TCP Certifications What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job DescriptionSalary: $83,200-$99,840 annual base salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector with a NICET II certification to join our growing Transportation & Infrastructure Division. In this role, you will be responsible for overseeing and inspecting bridge construction and/or bridge substructure repair near Newark, NJ, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role may also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. Appointment to this position is subject to client review and approval. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: • Conduct regular on-site inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary, and daily records of the numbers and classifications of workers employed by contractors., • Maintain daily records covering running totals of quantities and costs while construction is in progress., • Prepare and forward weekly quantity summaries for items associated with the contract., • Assist in the development and implementation of quality control procedures., • Review traffic protection procedures., • Attend meetings and conferences as needed. Who you are: • Required, • Certified by NICET as a Transportation Engineering Technician (NICET Level II), • Note: NICET Level III will also be considered for this role. Compensation is negotiable., • 5+ years of experience in construction inspection, with a focus on transportation infrastructure projects., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license and willingness to travel to various project sites within New Jersey and NYC Metro Area., • Preferred, • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • NJSAT, NACE, ACI Grade-I and TCC/TCP Certifications What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job DescriptionSalary: Evergreen Opportunity: We are continuously accepting applications for this role for potential future openings. We will be reviewing, interviewing and hiring for this role on a rolling basis. About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through aligning their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and NYC Metro Area, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Conduct regular on-site inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary, and daily records of the numbers and classifications of workers employed by contractors., • Maintain daily records covering running totals of quantities and costs while construction is in progress., • Prepare and forward weekly quantity summaries for items associated with the contract., • Assist in the development and implementation of quality control procedures., • Review traffic protection procedures., • Attend meetings and conferences as needed. Who you are: • Required, • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • 1 to 3 years of experience in construction inspection, with a focus on transportation infrastructure projects., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license and willingness to travel to various project sites within New Jersey and NYC Metro Area., • Preferred, • NJSAT, ACI Grade-I and TCC/TCP Certifications., • NICET I or II certification in transportation/highway and bridge construction ishighly preferred., • Will be required to be obtained NICET certification within 6 months of employment (if not actively held) What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer.mcfadoes not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in whichmcfamaintains facilities.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Road Inspector - NICET Level III or IV or equivalent Reports to: Project Manager/Resident Engineer General Qualities: • Proactive self-starter., • Provides the necessary technical support to the Project Manager/Resident Engineer. Technical Responsibilities: • Possesses strong technical skills; strong computer skills; strong mathematical skills including algebra, geometry, and trigonometry; excellent verbal, written, and interpersonal communication skills., • Inspects the work performed by the contractor related to the construction of the various components of a construction project for conformity with the contract plans and specifications., • Performs mathematical calculations for determining dimensions of construction items and computing daily progress quantities., • Prepares clear, accurate and detailed daily reports properly documenting the contractor's activities in accordance with the contract plans and specifications and the Owner's guidelines and standards., • Verifies that the materials to be incorporated into the project conform to the type, brand, and grade specified in the contract plans and specifications., • Collects samples for laboratory analysis and perform tests as necessary to determine the quality and quantity of materials incorporated into the project., • Collects information related to trainees, wage rates and minority goals for verification of EEO and compliance provisions of the specifications., • Prepares as-built calculations and measurements to properly document project quantities., • Is proficient in software required to complete assigned projects., • Responsive to Client and other KSE Department needs. Administrative Responsibilities: • Familiar with all company policies and procedures and verifies implementation and compliance., • Completes time sheet on a daily basis. Requirements: Educational Requirements: • High School Diploma Experience: • 10 years of Road construction projects (Construction Cost > $10M)., • 2 years on NJDOT projects preferred. Professional Licenses/Registrations: • NICET Certification in Roadway Construction Level 1 through 4 ACI Field Technician., • NJSAT Certification, • OHSA 10, 30 or 40-hour Safety Certification, • TCP (Rutgers CAIT) Professional Development: • Actively participates in professional development and training and licensing. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Armand Corporation, an award-winning M/WBE Construction Management firm celebrating over 34 years in the industry, is seeking a full-time Construction Inspector to join our construction management team. The ideal candidate has at least 5 years of experience with designing, installing, constructing, and inspecting various types of building concrete work, civil site work, paving work, drainage systems, hydrant fuel systems, structural, and maintenance of traffic, with some electrical, environmental, and plumbing knowledge., and holds valid driver's license for use of visiting various construction sites across New York and New Jersey. If selected, candidates will need to provide digital proof of licensure and certification for all U.S.-based accolades, including academic degree, before time of interview. Information provided is handled with discretion and will be used purely for benefit of employment with various government agency clients and associated background checks. This position will be full-time, On-site in New York/New Jersey Metro area. JOB RESPONSIBILITIES include, but are not limited to, the following: • Work under various engineering managers and quality assurance division heads to oversee ongoing construction of various civil job sites., • Attend acceptance inspections of new construction to confirm that work performed meets requirements of approved contract drawings., • Read and perform inspections on contract drawings to ensure quality of architectural, structural, mechanical, electrical, and plumbing elements, • Liaise with construction teams, either electronically from main office building, or directly in-person to ensure proper adherence to drawing code and upkeep is performed across all phases of construction., • Organize and prepare work reports on all ongoing projects., • Perform additional responsibilities as necessary.QUALIFICATIONS include, but are not limited to, the following:, • At least 5 years of experience with inspecting construction work varying in size (projects ranging from $500K to $5 million plus) and complexity (multiple crews and crew sizes per shift)., • Working knowledge of construction codes for New Jersey, New York City, and New York State, along with the related referenced standards such as ADA Standards, etc., • ICC/NICET Level 3 Asphalt or Highway Construction; ACI Concrete Special Inspector; and Work Zone Safety Certifications are desirable., • Must be able to demonstrate the ability to read and interpret construction drawings., • Bachelor’s Degree in Civil or Structural Engineering is preferred, but not required., • A valid driver’s license is required., • Night and weekend shifts are required, • OSHA 10 at minimum (additional training will be provided, if required). Supported scaffold training may be required as well, as need by project., • Ability to pass a TWIC, SIDA, and/or SWAC background check at a high level., • Strong written and verbal communication skills, • Must be authorized to work in the United States hyGbCMfdGB

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Bridge Inspector - NICET Level 3_4 or equivalent Reports to: Department Manager and/or Project Manager General Qualities: • Is a proactive self-starter and viewed as a positive example., • Provides technical and management support to supervisor., • Under the direction of supervisor has full technical and administrative responsibility for interpreting, organizing, executing, and coordination of a project, assignment, and/or task within a project. Technical Responsibilities: • Shall personally inspect the bridge/structure., • Shall supervise other inspection team member(s) to verify that each bridge/structure is properly inspected., • Shall verify that the inspection results are properly documented., • Verifies that all procedures required by the Client are implemented., • Verifies that all work is carried out in accordance with OSHA requirements and that all necessary MPT is in place as required by the entity that has jurisdictional control., • Verifies that all equipment required to complete the work is available., • Trains staff., • Keeps current with design criteria and technology., • Is proficient in software (engineering, drafting, administrative) required to complete assigned projects. Administrative Responsibilities: • Monitors invoice ability of self to verify compliance with established goals., • Familiar with all company policies and procedures and verifies implementation and compliance., • Completes timecard on a daily basis., • 7 years of Bridge construction projects (Construction Cost > $5M)., • 3 years on NJDOT projects preferred. Professional Licenses/Registrations: • TCP (Rutgers CAIT), • NJSAT Certification, • ACI field Technical I KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Quality Control Inspector Performs inspections on all molded and incoming material. Checks bill of materials on all outgoing orders. High School Education required Fluency in English and Spanish Computer skills – Word, Excel Need to use calipers and other measurement equipment. Must be able to read drawings

Job Description Tracking Number: MI-NDT-8405 Internal Job Number: 8405 Does joining a forward-thinking team focused on advanced NDT, with access to high-end equipment, excite you? Our Inspection Company is offering a unique opportunity to grow your career and make a substantial impact in Michigan. We are a leading 3rd party Inspection Company and are currently seeking a skilled NDT Level II Inspector (Radiography/CT) to join our specialized lab in Michigan. This role offers the perfect blend of technical challenge and professional growth in a highly autonomous environment. You'll work with cutting-edge X-Ray and Computed Tomography systems, serving a diverse client base across multiple industries. With upcoming retirements, we offer clear pathways for career advancement, including opportunities to learn new NDT disciplines, expand into sales, and take on greater leadership. This is a fantastic opportunity to pivot your career towards a truly rewarding path. Key Responsibilities: • Conduct thorough NDT inspections using both X-Ray and Computed Tomography techniques., • Analyze inspection images and data to identify defects, discontinuities, and material properties., • Generate detailed reports outlining inspection findings, adhering to client and industry specifications., • Operate and perform routine maintenance on advanced NDT equipment., • Collaborate with clients and internal teams to ensure accurate and timely project completion., • Adhere to all safety protocols and quality procedures in the lab. Recommended Qualifications: • ASNT NDT Level II certification in Radiographic Testing (RT) and/or Computed Tomography (CT)., • Practical experience with industrial X-Ray and CT inspection equipment., • Solid understanding of imaging principles and defect recognition., • Strong commitment to quality and accuracy in all inspection tasks., • Ability to work independently and manage time effectively., • Enthusiastic about relocating to Michigan for a long-term career opportunity. Preferred Qualifications: • Experience in a contract inspection laboratory or service environment., • Exposure to diverse applications such as castings, welds, and additive manufactured parts., • Familiarity with various software platforms used for NDT data acquisition and analysis., • Basic understanding of statistical process control. Roles That Should Apply: • NDT Radiography Inspector, • CT Operator/Technician, • Quality Inspector (NDT), • Materials NDE Technician, • Junior NDT Specialist If you're an NDT professional with a passion for precision and a desire for continuous growth, this opportunity in Michigan with our Inspection Company is for you. We provide the tools, the autonomy, and the career development paths to help you succeed. Join our team and contribute your expertise to groundbreaking projects.

Job Description Job Title: Manufacturing Quality Technician II Job Duration: 6 Months Contract – W2 Job Location:2 Henderson Dr, West Caldwell, NJ 07006 (Onsite) Note: Schedule and Shift: 9-80 A|1st Shift|07:30 AM This position will also support Saddle River NJ and Huntsville AL but will be based out of West Caldwell Description: Mercury Systems is seeking a talented individual to help drive cutting edge technology to mission critical aerospace and defense applications. As a Quality Technician, you will support our team of quality engineers by providing both technical and administrative assistance. You will be responsible for ensuring the accuracy of production records, discrepancy reports, and supplier documentation. Additionally, you will collaborate with operations, quality, purchasing, and stockroom to help achieve team objectives and drive continuous improvement. Job Responsibilities: • Accurately completes AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports., • Accurately reviews AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports from suppliers., • Accurately compiles and completes End Item Data Packages (EIDP), • Administrate and maintain calibration system complying to AS9100 and ISO 17025 for equipment., • Updating calibration system cycle inventory across sites., • Serve as the ESD coordinator for the site, • Perform comprehensive ESD program audits per ANSI/ESD S20.20 standards, • Inspect all grounding systems, flooring, and workstations, carts and shelving units, • Verify compliance with Mercury Systems’ internal ESD policies, • Test equipment calibration & certification, • Data Review, Reporting & Corrective Actions, • Navigates internal company software and database systems to gather quality data information., • Administrate and maintain calibration system to current updates., • Create and submit Purchase Requisition (PR) to procurement department for Purchase Order release., • Request quotes from external calibration houses., • Coordinate with operations on site calibration schedule for stationary equipment., • Support QA receiving inspection, in-process inspection and final inspection activities, • Interprets and understand drawings, specifications, customer requirements, • Works effectively with and communicates with various departments including operations, planning, quality, and QC inspection, • KPI/Metrics Review & Reporting, • Maintain and ensure accurate record-keeping of production documentation, • Collect and Index supplier-provided documentation for components and services, • Typically requires a minimum of three (3) years of quality assurance experience, • High School diploma or General Education Degree (GED), • Previous AS9102 First article inspection experience, • Previous AS9100 Quality Management Standard experience., • Previous IPC-A-610 and IPC-J-STD-001 training and/or certification., • Familiar with GD&T terminologies print reading, • Experience with electrical and mechanical inspection tools., • Strong PC skills with Microsoft Office – Excel, Word, Power Point, Minitab, JMP and database systems, • Experience in aerospace and defense industry, • Experience with any of the following business application systems – Oracle, Factory Logics, Power BI, Tableau, Agile, Net-Inspect Thanks and Regards, Jaswanth, Technical Recruiter Phone- (614) 953-0332 | || | Global Workforce Solutions | Certified MBE & EDGE Company | Microsoft Partner Direct Hire | Contingent Staffing | SOW Services | Clinical Staffing| IT Consulting | Payrolling You should be proficient in: • IPC-A-610, • IPC Joint Industry Standard (IPC-J-STD), • AS9100, • AS9102, • High School / GED $25 - $27 / hr

Job Description Join Weiss-Aug – A Leader in Precision Manufacturing and Innovation Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. QC Inspector – 2nd Shift Shift Schedule: 2:00 pm - 10:30 pm Responsibilities- Completes visual and mechanical inspections based on control plan, drawing, spec sheets and procedures. Able to expedite and prioritize workload. • Works with die setters, engineers, and/or managers in meeting the company quality policy by providing written and verbal communication related to specifications and data in a clear concise manner., • Quarantines product, performs transactions in ERP system, creates and maintains detailed records of inspections on various forms, prepares data packages for shipments., • Works with QC Inspector III, engineers, or managers. Supports management initiatives to improve the efficiencies such as creating and updating key quality documents such as visual standards and inspection instructions. Requirements, • High School graduate or equivalent, • 1-3 years of inspection experience in close tolerance manufacturing, • Must have a good understanding of GD&T to be able to interpret part specifications., • Must be able to use skillfully metrology equipment such as all hand gauges, microscopes, comparators., • Must be organized and able to maintain a clean workspace., • Must have the ability to use a computer with minimal training. Pay Range: $22-$25/hr Other Benefits Include * Medical, Dental and Vision * 401 (k) with company match * Holiday, Vacation and Sick Time * Tuition Reimbursement * Health Savings Accounts (HAS) * Flexible Spending Accounts (FSA) * Cigna Wellness Incentive Program * Employee Assistance Program (EAP) * Short Term Disability * Group Life and Accidental Insurance * Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance * Smoking Cessation Program * Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Job Description Quality Inspector - Hudson Tunnel Project | New York / New Jersey About the Company & Project Our client is a leading global construction consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Quality Inspector for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Quality Inspector, you'll play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our clients purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Perform site inspections to assess construction methods, materials, and workmanship for alignment with project specifications and regulatory standards., • Assist in executing and monitoring the Quality Management Plan, ensuring procedures are properly followed throughout the project lifecycle., • Conduct audits of contractors and subcontractors to confirm compliance with defined quality protocols and package-specific requirements., • Review contractor testing and inspection plans, evaluate test results, and maintain accurate testing logs., • Provide feedback on quality documentation and support project management with actionable recommendations., • Maintain organized records of inspections, testing, acceptance activities, and punch list items., • Document nonconforming work, track corrective actions, and monitor resolution of quality issues., • Coordinate and oversee materials testing, including off-site lab work by independent organizations., • Collaborate with engineers, contractors, and stakeholders to resolve quality concerns and drive continuous improvement., • Bachelors degree in civil engineering, construction management, or a related discipline (preferred)., • Minimum 3 years of experience in quality assurance, inspection, or construction management on large infrastructure or transportation projects., • Familiarity with federally funded projects and regulatory compliance is an asset., • Solid understanding of construction practices, materials testing, and quality control procedures., • Experience with document control systems and quality management frameworks., • Proficient in Microsoft Office and basic project management tools., • Strong organizational skills and attention to detail, with the ability to work collaboratively across teams., • Comfortable working in field environments and adapting to evolving project demands. Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status. Why this is a Great Opportunity • Full-time position with competitive compensation, • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Collaborative and supportive work environment with the opportunity for growth in your career, • Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k).

Job Description Field Examiner Responsibilities: • Conduct detailed inspections of construction sites, infrastructure projects, and related field activities to ensure compliance with design specifications, safety regulations, and local codes., • Document inspection findings accurately through written reports, photographs, and digital records, highlighting any deviations or concerns., • Communicate effectively with contractors, project managers, and regulatory bodies to address and resolve compliance issues promptly., • Monitor ongoing work to verify that corrective actions are implemented and standards are maintained throughout the project lifecycle., • Stay updated on relevant laws, regulations, and industry best practices to ensure inspections reflect current requirements., • Conduct and perform final acceptance witnessing

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE This position will be responsible for providing inspection and technical program support for equipment inspection, test, and repair portions of the overall Mechanical Integrity/Quality Assurance effort. The role will primarily focus on the Morses Mill (Linden, NJ) site, while also being integrated and part of the Acid Technology Center which provides support to all of the NEXPERA sites. The site produces Sulfuric Acid. The role will reside at the plant site and reports to the Asset Manager. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Develop/Authorize/Maintain and implement standardized inspection plans for all PSM Critical Equipment, including pressure vessels, process vessels, heat exchangers, piping, storage tanks, and other equipment., • Perform equipment inspection in accordance with API 510, API 653 and API 570 guidelines and regulations., • Complete post inspection reports and provide recommendations and/or modifications for immediate concerns and future consideration., • Develop, implement and document repair plans for fixed equipment, • Perform field contract administration duties during field repairs of equipment, • Standardize, organize, and maintain required documentation (design bases, inspection plans, inspection reports, etc.) in accord with corporate and site MIQA best practices., • Update SAP and equipment files with equipment history, Inspection Plans., • Ensure that all inspections and tests are performed in accordance with the original equipment design basis and in alignment with recognized and accepted good engineering practice (RAGAGEP)., • Ensure that all repairs to fixed PSM Critical Equipment is documented in accordance with OSHA 1970.119, • Evaluate the fitness-for-service of all fixed PSM Critical Equipment and assist other Technical/Maintenance resources in properly developing and documenting any repairs to return the equipment service., • Perform necessary calculations required within the RAGAGEP to determine the minimum allowable thickness of pressure vessels, piping, and tanks in PSM Critical service., • Provide functional guidance to NEXPERA and contract NDE Examiners, • Evaluate results of various non-destructive inspections on process equipment and provide recommendations based on those inspection results, • Act as an the Authorized Inspectors for PSM Critical pressure vessel, piping, and storage tank inspections and tests, as well as for approval of all alterations to PSM Critical pressure vessels, piping, and storage tanks., • Manage & Implement the Corrosion Monitoring program PSAIM® for the sites, • Coordinate contract NDE inspections and perform Field Contract Administrator responsibilities, • Develop Quality Assurance Plans for fabrication of new equipment (ex. tanks, pressure vessels, piping, etc…), • Perform/coordinate QA inspections of new equipment on site and at shop locations., • Estimate equipment remaining life per the applicable RAGAGEP., • Maintaining the site Owners User Manual as applicable., • Perform UT and PT on an as needed non-routine basis (NEXPERA will provide training if not certified) Qualifications In order to be qualified for this role, the following is required: • 3 plus years work experience within high hazardous chemical processing or oil refining industries or similar industries, • At least 2 out of 3 of the following certifications: API 510, API 570, API 653, • Able to travel approximately 30-40% per year, • Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description O

As an Electrical Inspector you will observe and accept installation of electrical distribution systems, including electrical switchgear, substations, motor control centers, panelboards, electrical cabling with electrical trays and conduits, and communication systems and cabling. The Electrical Inspe

To qualify, candidates must have prior construction inspection experience on NJDOT projects and possess NICET II, III or IV Certification in Transportation/Highway and Bridge Construction or equivalent; NJSAT, ACI - CCTC and Rutgers TCC certifications. Construction Inspector - SkillBridge Eligible O

Now Hiring: Housekeeping Supervisor. You are part of the Housekeeping team. As the Housekeeping Room Inspector, you ensures the cleanliness and attractive appearance in the guest accommodations and public spaces in accordance with hotel standards.

Pennoni Associates is currently seeking Construction Inspectors with experience consistent, but not limited to: Performing field inspections on public improvement projects that may include highway reconstruction of concrete and asphalt pavement, stormwater drainage, bridge reconstruction, pedestrian

Program Dates May 19th, 2026 – August 7th, 2026 About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Markets®, Gourmet Garage®, and Morton Williams® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. Your contribution If you are a student who is pursuing an education in Supply Chain Management, Food Engineering, Quality Assurance, Quality Control Management, or other related fields, these internship opportunities may be a great fit for you! Wakefern prides itself in being the industry leader in Logistics and Distribution. Our organization currently services over 400+ retail stores throughout the northeast. The Logistics Infrastructure includes 9 warehouses in New Jersey and Pennsylvania, housing 4 million square feet of warehouse space. Wakefern’s fleet of over 2000 trailers ship approximately 1.4 million cases daily while traveling 52,000,000 miles per year! This sophisticated operation utilizes state of the art technology to meet the needs of our more than 8 million customers. Quality Assurance Product Inspector (Produce) track: This internship goes beyond a typical desk job, you’ll be immersed in the core of our supply chain operations. The QA (Produce) Intern plays a hands-on role in inspecting fresh produce and other perishable items to ensure quality, safety, and compliance with Wakefern standards. This position involves physically examining inbound deliveries for grade, freshness, proper labeling, and packaging integrity, as well as monitoring temperatures and verifying weights and counts. Interns will gain first-hand experience with Wakefern’s Food Safety and Quality Practices, USDA and FDA guidelines. Interns will be learning leadership skills mentored by supervisors to understand all skills required in a Quality Assurance Product Inspection department. What you will do • Work in a refrigerated warehouse environment., • Inspects all inbound deliveries to ensure the purchased goods conform to all established product specifications, standards, and grade requirements., • Performs random organoleptic inspections of inbound goods to assure the quality, grade, and wholesomeness of the product., • Inspects all inbound deliveries for cleanliness and soundness of the transportation vehicle and the absence of cross contamination., • Monitors product temperatures by means of physical probing of goods and observation of time and temperature recording devices., • Verifies the weights and counts of received goods., • Examines all packaging for proper labeling and enforces all packaging and labeling requirements of the FDA, USDA, and USDC., • Monitors products in inventory and storage for quality and safety., • Performs daily sanitation inspections of all applicable facilities and warehouses., • Gathers and organizes all records and documentation to comply with all regulatory requirements., • Monitors all control points, critical control points, and quality control points for each of the food safety and food quality plans for the applicable perishable food facilities., • Physical demands include the ability to bend, stretch, extend, tug and pull based on inspection of various products, Ability to work in cold temperatures as low as 33 °F., • 5 days on site - no remote work., • Wear OSHA-Compliant Steel Toe or Composite Safety Boots when in the warehouse is required., • Bilingual Spanish / English is a plus, but not required., • Provide coverage for the Shift Supervisors, working any 5 of the 7-days, including weekends, holidays, vacations, and peak volume periods. Interns work 40 hours per week., • Various projects as assigned., • Interns will be based out of one of the following warehouse locations and may work one of the following shifts: Locations/Shifts Northern Perishables – Elizabeth, NJ 5:00am-1:30pm or 6:00am-2:30pm (shift times may be later on certain days to reflect events interns are required to attend) Produce Facility – Newark, NJ 5:00am-1:30pm or 6:00am-2:30pm (shift times may be later on certain days to reflect events interns are required to attend) What we are looking for • Must be at least 18 years old, • Must have completed 24 college credits with a 3.0 cumulative GPA or better, • Will be enrolled in an undergraduate or graduate school for fall, • Successful completion of a substance abuse test is required, • Successful completion of a background check is required, • Reliable transportation is required, • Strong interpersonal, analytical, and customer service skills with the ability to multitask and manage time effectively, • Excellent communication skills (written, oral, and presentation), • Strong MS Office skills (Excel, Word, and PowerPoint required), • Ability to exhibit proper business etiquette when dealing with all levels of the organization, • Previous work experience in a retail environment is beneficial, • Must have flexibility with regard to schedule which can include coverage for a 7-day work week, weekends, holidays, vacations and peak volume weeks (interns will work 40 hours per week) Company Perks • Vibrant Food Centric Culture, • Corporate Training and Development University, • Collaborative Team Environment, • Educational Workshops, • Networking Opportunities, • Volunteer Opportunities Compensation and Benefits: First year Wakefern Supply Chain/Logistic Interns will be paid at $18.00 per hour. Master Students and Returning Wakefern Supply Chain/Logistic Interns will be paid at $19.00 per hour. Interns are not eligible for company benefits including medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off and holidays.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Markets, Gourmet Garage®, Di Bruno Bros®, and Morton Williams® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. Your contribution The Product Inspector position is responsible for performing routine and thorough inspections of all inbound perishable foods to ensure the quality, wholesomeness, proper labeling, and fair packaging in adherence to the Wakefern standards. The Product Inspector will be expected to exhibit first-hand knowledge of Wakefern’s Food Safety and Quality Practices along with USDA and FDA Guidelines. Additional job functions noted below. The hours worked will be 12:00am-8:00am. What you will do • Inspects all inbound deliveries to ensure the purchased goods conform to all established product specifications, standards, and grade requirements. This applies the Drive for Results competency., • Performs random organoleptic inspections of inbound goods to assure the quality, grade, and wholesomeness of the product., • Inspects all inbound deliveries for cleanliness and soundness of the transportation vehicle and the absence of cross contamination., • Monitors product temperatures by means of physical probing of goods and observation of time and temperature recording devices., • Verifies the weights and counts of received goods., • Examines all packaging for proper labeling and enforces all packaging and labeling requirements of the FDA, USDA, and USDC., • Monitors products in inventory and storage for quality and safety., • Performs daily sanitation inspections of all applicable facilities and warehouses., • Gathers and organizes all records and documentation to comply with all regulatory requirements., • Monitors all control points, critical control points, and quality control points for each of the food safety and food quality plans for the applicable perishable food facilities., • Monitors store returns to determine if credit is warranted and direct operations as to the disposition of the returned goods. Core Competencies • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two way communication., • Build Relationships: Creates cross functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals. What we're looking for • Four year College degree preferred, or presently enrolled with a minimum of 60 credits, or a minimum of 3 years equivalent work related experience., • Knowledge of USDA, AMS Grade Standards and inspection procedures, impacting the Drive for Results competency., • Knowledge and understanding of FDA Preventive Controls for Human Food requirements, applying the Stay Competitive competency., • Understanding and ability to monitor Sanitation Standard Operating Procedures., • Must be able to maintain accurate records and reports., • Ability to interact well with Supervision as well as Affiliated Warehouse Associates, applying the Build Relationships competency., • Ability to communicate effectively with all levels of management and vendor representatives., • Well-developed written and oral communication skills., • Skilled in WMS, Rapid, Outlook, Microsoft Word, and Excel., • Flexibility with regards to work schedule including days of the week, shifts, holidays, and locations. (Hours/Shifts 12:00am-8:00am). How you'll work • Ability to perform heavy lifting (up to 70 lbs.)., • Ability to walk the length of the warehouse multiple times throughout the day (back and forth from the docks)., • Physical demands include the ability to bend, stretch, extend, tug and pull based on inspection of various products, • Ability to work in cold temperatures as low as 33 degrees. Company Perks • Vibrant Food Centric Culture, • Comprehensive medical, dental and vision package, • Competitive Salary and Paid Time Off, • Fitness Reimbursement and Well-Being Program, • Corporate Training and Development University, • Collaborative team environment, • Paid Parental Leave, • 401K, • Matching Gifts and Community Volunteer Involvement Compensation and Benefits The salary for this position is $61,984.00. Placement in the salary depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements. More information can be found on our Count Me In website.

A leading energy management firm is seeking a Site Inspector in Newark, NJ.The role involves inspecting building systems and implementing energy efficiency programs.The ideal candidate should have a Bachelor's degree in Energy Management or Engineering, strong knowledge of lighting and HVAC systems,

Qualified Cpsi - Certified Playground Safety Inspector - Field Inspectors For Insurance Loss Control. We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training cou

To qualify, candidates must have prior construction inspection experience on NJDOT projects and possess NICET II, III or IV Certification in Transportation/Highway and Bridge Construction or equivalent; NJSAT, ACI CCTC and Rutgers TCC certifications. Road And Bridge Construction Inspectors. Dewberr

Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. H&S Loss Control Inspections, Inc Company Information. We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters.

Occupancy Verification Position.FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders.Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule.Experience with mortgage fi

Now Hiring: Housekeeping Supervisor. You are part of the Housekeeping team. As the Housekeeping Room Inspector, you ensures the cleanliness and attractive appearance in the guest accommodations and public spaces in accordance with hotel standards.

HMT is seeking a dedicated and skilled Certified API 653 Inspector to join our team.

Termite treatments and complete pest control solutions. No pest control experience required well teach you everything. At Orkin, we do more than eliminate pests we protect health, homes, and peace of mind by providing many different services, including:.

Visually inspect vehicles to ensure any vehicle maintenance violations are corrected. Partner with Safety to Install or remove in-vehicle camera and gateway. Apply or remove vehicle decals.

HMT has an immediate need for an API 653 certified Inspector to assist with performing inspections in accordance with API standards:.Perform API 653 inspections per customer's scope of work and HMT's internal process and procedures.Maintain a positive relationship between client, facility and custom

To qualify, candidates must have prior construction inspection experience on NJDOT projects and possess NICET II, III or IV Certification in Transportation/Highway and Bridge Construction or equivalent; NJSAT, ACI - CCTC and Rutgers TCC certifications. Construction Inspector - SkillBridge Eligible O

Performing both complex and routine/standard inspections of construction to evaluate if appropriate materials and construction processes are used; and that construction conforms to plans, specifications, and special provisions. Work will require the knowledge of materials, methods, and equipment use

If Youre Great at Sales, Weve Got the Career for You.Are you a natural at connecting with people and closing deals? At Orkin, well turn your drive and people skills into a successful, long-term sales career with.As an Orkin Sales Inspector, youll offer homeowners genuine peace of mind by providing t

Quality Inspector Job Duties: Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Docum

The Chief Inspector ensures that repair station operations comply with FAA/CAA/EASA regulations, Unilode's Quality Manual/Procedures, and Customer Air Carrier requirements. The Chief Inspector must demonstrate professionalism, adaptability, and a commitment to continuous improvement.

Join CDM Smith's dynamic Construction Engineering and Inspection (CEI) team as a Senior Roadway and Bridge Construction Inspector. As a Senior Roadway and Bridge Construction Inspector, you will:. If you have a passion for construction, enjoy being active, and excel in fieldwork, this is an exceptio

To qualify, candidates must have prior construction inspection experience on NJDOT projects and possess NICET II, III or IV Certification in Transportation/Highway and Bridge Construction or equivalent; NJSAT, ACI – CCTC and Rutgers TCC certifications. Minimum 5 years prior road and/or bridge cons

Aviation safety inspectors work to ensure the safety of aircrafts, including its parts, processes, and its aircraft operators. Inspectors are the first line of defense in performing accident investigation.

Mortgage Occupancy Field Inspector. We are looking for knowledgeable and experienced inspectors:. Have used at least one of the industry standard smart phone apps: InspectorADE (what GIS uses), EZ Inspections or SafeView inspect.

Follow this link for a realistic job preview and videos of what it's like to work at KTA!* :.KTA) is a 100% employee-owned materials engineering firm, internationally recognized as a leading expert in corrosion protection and asset integrity.Five business units comprise the $40 million enterprise of