Trabajos low voltage technician en Dallas, TexasCrear alertas

ABM Industries is seeking Senior Field Service Technicians (NETA, NICET or equivalent experience) to join our Electrical Power Services team in Irving, TX. The Senior Technician will play a key role in insuring a safe and efficient installation & testing of electrical power distribution equipment for customers in the assigned territory. In this role, you will travel approximately 25% of the time, working both independently and with a crew, and handle the performance and management of routine, moderately complex, and complex tasks and projects, record-keeping, evaluation of test data, and preparation of field service reports. Position Summary Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems. Supervise Trainees, Assistants, and Technicians in the completion of electrical testing duties. Observe testing, assign work on projects to capable technicians, ensure testing of similar items is consistent across test technicians Track project scope completion and communicate ABM and Customer Management Maintain, test, repair, rebuild, and replace low, medium, and high-voltage switchgear and circuit breakers. Troubleshoot automatic transfer switches. Test and inspect low, medium, and high-voltage cable installations. Maintain, test, and repair transformers and related equipment. Test and calibrate solid-state and electromechanical relays. Perform relay calibration and power metering. Conduct low and medium-voltage motor control center and contractor testing. Start-up, troubleshoot, and repair generator controls and transfer schemes. Test and commission protection and control systems on high voltage substations. Sample and interpret insulated fluids. Complete Job Hazard Analyses including but not limited to arc-flash and shock analyses Review and submit timecards, expense, and project reports. Document test results and complete field reports. Rotate emergency on-call duty. Maintain strict compliance with regulatory laws Assist in the sales process acting as the technical expert in electrical testing and maintenance of electrical equipment Qualifications Must have a minimum of 5 years experience in electrical testing. The candidate should have experience working with a team. Experience in working on projects Familiar with NETA Acceptance and Maintenance Testing Standards Familiar with NFPA70E Electrical Safety standards Ability to troubleshoot electrical performance deficiencies Ability to travel regionally 25% Knowledgeable in lockout/tag-out and hazardous energy control procedures. Clean Driving Record and Drug-Free Preferred Qualifications Familiar with NETA Acceptance and Maintenance Testing Standards Hold a current NETA Level 2, 3, IV or NICET or equivalent/experience Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ | ___ ABM offers incentives such as sign on bonuses, relocation/temp housing assistance, commensurate with experience, take home company service vehicle & fuel card, local paid travel time and more. About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

Mission The Training & Development Lead empowers Digi Security Systems’ technicians and staff to grow their skills, uphold safety practices, and maintain professionalism by owning technician training initiatives, assessments, technical readiness, and the Safety Deputy Program. This role designs and scales impactful resources, training, and tools to elevate technician performance, promote field excellence, and support organizational growth. Key Responsibilities • Spearhead the Safety Deputy Program, • Maintain and enhance the Safety Deputy Program to identify, train, and empower Safety Deputies within technician teams to reinforce a daily safety culture., • Implement monthly safety audits and feedback loops to ensure consistent execution and continuous improvement across all sites., • Lead Technician Assessments, • Develop and administer a standardized, skills-based evaluation framework to assess technical competencies, safety awareness, and role-specific readiness., • Use assessment data to inform targeted development plans and team assignments to optimize performance., • Improve Compliance, Readiness, and Team Operations, • Design and implement tools (e.g., dashboards, checklists, digital trackers) to streamline daily tasks, certification tracking, and readiness reviews., • Launch recurring training cadences and cross-training programs to enhance technician agility, reduce downtime, and boost on-the-job confidence., • Define and Scale Technical Standards, • Create detailed, version-controlled documentation for key technician procedures and best practices, ensuring clarity and consistency across all teams., • Instructional Design & Facilitation, • Designs and facilitates structured, engaging training for adult learners, both in-person and virtually., • Measures and tracks learning outcomes to ensure training effectiveness., • Field & Technical Expertise, • Demonstrates strong knowledge of low-voltage, AV, and structured cabling practices., • Builds credibility with field technicians through hands-on expertise and applies industry best practices to training and standards., • Program Development & Scaling, • Builds sustainable systems and training programs, maintaining documentation and tools in a centralized system., • Continuously improves programs based on field and stakeholder feedback., • Employee Relations & Coaching Support, • Supports disciplinary actions and improvement plans with professionalism., • Tracks employee sentiment, escalates risks, and maintains trust in sensitive situations., • Safety Program Leadership, • Owns and evolves the Digi Safety Deputy Program, ensuring staff complete required trainings., • Assists with Toolbox Talks and proactively identifies and resolves safety risks in collaboration with field leaders., • Cross-Functional Collaboration, • Works effectively with People Operations, HR, Technical, and Operations teams., • Grit: Perseveres through complex program development and alignment, maintaining quality in high-growth and high-pressure environments., • Self-awareness: Understands how their training and decisions impact technician performance, field operations, and customer outcomes., • Bias for Action: Proactively builds systems, addresses training gaps, and drives improvements without waiting for instruction., • Team Player: Collaborates across field and HQ teams, supports local training leads, and incorporates field input., • Clear Communicator: Explains technical material, program expectations, and feedback clearly in multiple formats., • Coachable: Welcomes feedback from leaders and field teams, adjusting training programs and methods as needed., • Highly Technical: Possesses strong working knowledge of field installation, technical workflows, safety standards, and tools., • Degree in Training and Development, Technical Education, or a related field (preferred)., • 5+ years of experience in training, technical instruction, or technician development, preferably in low-voltage, AV, or structured cabling industries., • Strong understanding of safety standards, compliance, and technical workflows in a security & field-based environment., • Proficiency with tools like ConnectWise, SiteOwl, various dashboards and other digital trackers for program management and documentation., • Exceptional communication, facilitation, and interpersonal skills to engage diverse audiences and build trust., • Ability to manage multiple projects, adapt to changing priorities, and work collaboratively in a fast-paced environment.

Make an impact with NTT DATA Join a company that is pushing the boundaries of what is possible. We are renowned for our technical excellence and leading innovations, and for making a difference to our clients and society. Our workplace embraces diversity and inclusion – it’s a place where you can grow, belong and thrive. Essential Duties & Responsibilities • Supervises the Data Center Technicians and the Facilities Technicians., • Operates and maintains data center in such a condition as to assure the most optimal uptime to customers for facilities services (electrical, cooling, etc. measured by Five 9’s)., • Tasks out the CFOps team in such a way that complies with all local, state, and federal requirements for fire, health and Life Safety., • Provides tasking for the daily operations and maintenance scheduling of non-critical and critical maintenance., • Ensures the CFOps team works effectively to achieve the CFOps goals, reviewing budget, staff planning, NPS, efficiency, etc., • Analyzes data center equipment to obtain maximum effectiveness and efficiency; safety, cost, equipment longevity, and reliability., • Conducts in-depth training with the Data Center Technicians on equipment, PM’s, QA and CFOps procedures/processes., • Manages and maintains all training documentation; provides documentation to HR., • Ensures data center operates at maximum efficiency, including: analyzing existing operating conditions, recommending new technologies, maintaining customer SLA requirements, and improving overall efficiency while maintaining budget expectations., • Works with customers to provide successful installs that exceed expectations – delight the customer., • Supervises the safety and well-being of all CFOps team., • Responsible for shift assignments, timekeeping review & approval and PTO approval for all assigned Data Center Technicians and Facilities Technicians., • Writes and Reviews non-critical and critical Method of Procedures (MOP’s), Standard Operating Procedures (SOP), Standard Method of Procedure (SMP) and provides input., • Supervises the execution of non-critical and critical Method of Procedures and ensures their thorough completion., • Strong background in electrical and mechanical systems design review, layout, installation, commissioning and operations, • Expert knowledge of low voltage systems, including fire, security and PLCs, • Expert knowledge of NFPA Electrical, Fire and Life Safety and building codes, • Expert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25 and compliance issues, • Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations), • Experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems, • Strong supervisor skills, • Excellent communication skills, both written and oral, • Extensive hands-on experience installing, maintaining and troubleshooting large commercial and industrial mechanical & electrical systems including:, • 12kV switchgear, • 480/277 and 208/120 volt electrical generation and distribution systems, • Diesel powered AC generator plants up to 2MW, • Static UPS systems, • Multi-string flooded cell batteries and monitoring systems, • Static switches, • PLC and relay logic controls, • Power monitoring systems, • Data center power distribution and management systems, • VFD Drives, • Large Centrifugal Chillers, • Cooling Towers, • Water Treatment Systems, • HVAC equipment, • Computer Room AC Units (CRACs), • Kyoto Cooling Units (where applicable), • Operating Building Management and Industrial PLC Control Systems, • Emergency Standby Diesel Generator Systems, • Fuel/Oil systems, Fuel/Oil Day tanks and Fuel/Oil Storage Tanks, • Knowledge of NFPA 25, sprinkler and dry-stand pipe systems, including Emergency Fire Pump where applicable, • Chilled/Condenser Water Pump, • Well/Vault or Sump Pumps, • Domestic Water systems, including BackFlow Prevention devices, • Proficient with MS Office Suite (Word, Excel, PowerPoint, Project), • Ability to train the electrical and mechanical teams on the systems and the procedures, • Ability to conduct power & fire system capacity, safety and code compliance assessments, • Ability to operate in and promote a rigorous process-driven, team environment, • Ability to logically analyze and solve problems, • Ability to multi-task multiple projects, • Bachelor of Science in Engineering degree or equivalent work experience normally obtained with 5-6 years’ related experience., • A minimum of 5 or more years in a mechanical/electrical position within critical facilities, including Power or critical electrical power/mechanical environment (preference given to data center, hospital, semi- conductor or power plant experience)., • Minimum of two or more years as a foreman, lead or senior level technician in a critical facility environment., • Certified Electrician preferred in state where assigned., • CPR/First Aid and NFPA70E Certification during employment., • Primarily walking, standing, and bending with some sitting., • Ability to communicate effectively with verbal, visual and listening skills, • Able to lift heavy equipment, up to 50 pounds., • Close visual work on a computer terminal., • Dexterity of hands and fingers to operate any required equipment as well as to operate computer keyboard, mouse, and other technical instruments., • Typical data center work environment with varying temperatures and loud noises., • Extensive daily usage of a computer or workstation., • Must be comfortable working in a highly critical, fast paced environment shifting priorities, • Must be able to respond to emergency situations at the data center., • Must be willing to be part of the after-hours notification and escalation protocol., • Must carry a cell phone for availability during assigned shift and emergency situations., • Must be willing to work outside normal business hours, including weekends, late nights, holidays., • Must wear leather close-toed shoes with a solid rubber sole.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Job Description: As a Refrigeration Technician, you will work with the maintenance team to maintain, troubleshoot, and repair HVAC, Refrigeration and facilities equipment to maintain critical temperatures and improve reliability of our systems. This role is the resident expert in refrigeration systems. Shift: Monday to Friday - 7:00am to 3:30pm You will.. • Maintain and operate industrial refrigeration systems including large rack systems, split systems, blast chillers, cooling towers and ancillary equipment., • Lead and educate compliance with all safety, food safety, and security standards., • Perform preventive maintenance and routine inspections on assigned refrigeration and HVAC systems and ancillary equipment as needed., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower-level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in refrigeration., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced refrigeration processes, tools and techniques., • Audit maintenance personnel work and provide feedback to improve performance and quality., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • Write and/or modify PMs to standardize across the network and increase effectiveness., • Repair and perform predictive and preventative maintenance procedures on CO2 and Freon refrigeration systems including, but not limited to compressors, pumps, fans, heat exchangers, glycol systems, various industrial utility systems, motors, and power distribution systems., • Give direction and/or training to entry level refrigeration technicians including, but not limited to day-to-day operations, inspections and inspection techniques, basic repairs and repair techniques, and conformance to all state, local, and HelloFresh regulations and policies., • 4-6 years of experience with refrigeration repair and maintenance in an industrial setting,, • Advanced understanding of rack system refrigeration and associated equipment., • Experience with repair and maintenance of glycol systems, heat exchangers, HVAC, and water chiller systems., • Experience with electrical systems including single and three phase motor systems, power distribution, and low voltage controls with the ability to troubleshoot to the component level., • Current Environmental Protection Agency (EPA) Section 608 certification., • All necessary regulatory licenses required by local municipalities to work in the field of industrial refrigeration., • Ability to demonstrate excellent work habits in line with Good Manufacturing Practices (GMP’s)., • Ability to conform to all OSHA, PSM, HAZMAT, and HelloFresh safety programs and regulations., • Ability to demonstrate understanding of proper handling and recycling procedures for chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), Hydrofluro-Olefins (HFO), CO2, and other industry standard refrigerant types., • Ability to safely replace mechanical and electrical components including motors, motor starters, switches, solenoids, pumps, refrigeration valves, compressors, and auxiliary refrigeration equipment., • Experience working with a wide range of networked refrigeration controls platforms., • Ability to withstand walking, lifting, bending, stooping, climbing ladders, walking on roofs, and working in confined spaces., • Basic computer skills., • Ability to read and understand drawings, schematics and diagrams., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude. You’ll get… • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+ At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

Job Summary The Service Technician IV - Controls serves as a lead and front-line resource to other service technicians by providing technical support, training, and guidance. This role is responsible for performing diagnostics, maintenance, and repair services on building automation and control systems. Ensures system functionality, efficiency, and integration in commercial and industrial environments while supporting safety, compliance, and operational standards. Essential Duties • Manages advanced controls installation, programming, troubleshooting, and repair tasks, • Diagnoses system performance through observation, testing, and setup as required by trade/position. Performs planned maintenance and inspections as indicated in the service agreement. Proficiently operates hand tools, power tools, gauges, and measuring equipment, • Executes service contracts, quoted projects, and demand service calls as instructed. Cultivates lasting relationships with clients, ensures customer satisfaction by explaining the work done, and maintains clear communication with all project stakeholders, • Serves as a lead and front-line resource to service technicians through technical support. Coordinates the work of subcontractors, and trains and provides guidance to technicians, • Participates in technician on-call standby rotation as dictated by business unit policies and procedures, • Coordinates multi-tech service calls, • Completes documentation of invoicing, commissioning and check out data based on hours worked and materials or equipment used to complete the service, • Safely drives a motor vehicle and trailer, follows requirements of company vehicle driving policy and adheres to all company safety requirements, • Maintains equipment, tools, and inventory stock on service vehicle, • High School Diploma or GED is required, • Two-year technical degree in related field is preferred, • Tridium AX/N4, Distech, Siemens, and Siemens Desigo Certification, • Minimum of 7 years' experience as a Service Technician, • Required: Fundamentals of A/C electrical circuits and low voltage D/C electrical circuits and operation, • Hands on experience with one or more controls platforms (Siemens, Distech, JCI, Inet, etc.), • Access controls and lighting controls installations and programming skills, • Advanced controls programming and troubleshooting skills, • Must have ability to read and interpret blueprints, wiring diagrams, and device data sheets, • Must have ability to use testing and metering devices, • Familiar with Windows operating systems and software, • Professional demeanor, solid interpersonal skills with good written and oral communication capability, • Demonstrates strong business ethics at all times Grow Your Career with TDIndustries Founded in 1946, TDIndustries is a premier, employee-owned Mechanical, Electrical, and Plumbing (MEP) company delivering full-lifecycle building solutions-from design and construction to service and facilities maintenance. We power critical environments like hospitals, schools, data centers, stadiums, and commercial buildings across Texas and the Southwest. Our Partners (employees) are the core of our success. As an employee-owned company, you have a voice, a stake, and a clear path to grow. Recognized by FORTUNE Magazine as a "100 Best Company to Work For," we invest in top training, career development, and a culture built on trust and servant leadership. Join a growing team where your skills matter, and your future is built to last. At TDIndustries, we believe opportunity should be built - and shared - by all. Whether you work with tools or technology, in the field or the office, we hire and grow people based on skill, potential, and integrity - never labels. We value the diverse paths that bring people to our team and welcome Partners of all backgrounds, including differences in race, color, religion, sex, gender identity or expression, sexual orientation, age, ability, military service, and more. What matters most is how we work together to build excellence.

Location US-TX-Irving ID 2026-2157 Category Technician Position Type Full-Time Remote No The Field Service Technician - Electrical Testing will be responsible for performing electrical testing, maintenance, and repair services on electrical distribution systems and equipment. The technician will work with a team of professionals to ensure that all work is completed safely, efficiently, and to the highest quality standards. Shermco Industries is seeking a NETA Field Service Technician Field Service Test Technicians travel to customer sites (industrial & commercial) to inspect, test, troubleshoot, perform start-up and collect data of low, medium and high voltage (480 Volt to 600 kV) electrical systems. • Instrument transformer tests, • Power transformer testing - Doble, TTR, Insulation Resistance, etc., • Test both electro-mechanical and solid state relays, • Cable testing - Tan Delta, Power Factor, VLF, DC Hipot, • Automatic transfer switch troubleshooting, • Low, Medium and High voltage switchgear and circuit breaker testing, • Moderately complex relay calibration and power metering., • Must be able to drive daily locally/regionally and be available for periodic overnight travel., • Prefer an Associate's degree from an accredited 2 year technical college in Electrical Power & Controls (EPC), or a EE Degree from an ABET accredited college, similar experience and training from the military (Army Prime Power, Air Force Electrical Power Production, or NAVY Seabee), • NETA Certification (I, II, III or IV) or similar desired, • Must have at least 2 or more years of relevant experience performing switchgear testing & troubleshooting., • Must have good PC skills including email, internet, data entry and Microsoft Excel; experience with PowerDB a plus., • Must be able to work safely and adhere to all electrical safety procedures., • Must be able to stay Drug-Free; you will be required to pass a pre-employment hair follicle drug test and periodic, unannounced random drug tests., • Must have an acceptable pre-employment criminal background check., • Must be physically fit to to crawl, climb, stand, walk and lift up to 75 lbs., with or without reasonable accommodations. Must be able to pass a fit for duty physical exam., • Must have a valid driver's license, and currently have and be able to maintain a good driving record., • Must be willing to work flexible hours and overtime, and occasional weekends, holidays and nights., • Must not currently or in the future require sponsorship to work in the U.S., • Must be able to read, write, and speak English fluently, • Must be willing to travel; minimum 40%. Shermco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Shermco is a drug-free workplace. NO AGENCIES PLEASE USD $30.00 - USD $60.00 /Hr.

Location US-TX-Irving ID 2026-2163 Category Technician Position Type Full-Time Remote No The Field Service Technician - Electrical Testing will be responsible for performing electrical testing, maintenance, and repair services on electrical distribution systems and equipment. The technician will work with a team of professionals to ensure that all work is completed safely, efficiently, and to the highest quality standards. Shermco Industries is seeking a NETA Field Service Technician Field Service Test Technicians travel to customer sites (industrial & commercial) to inspect, test, troubleshoot, perform start-up and collect data of low, medium and high voltage (480 Volt to 600 kV) electrical systems. • Instrument transformer tests, • Power transformer testing - Doble, TTR, Insulation Resistance, etc., • Test both electro-mechanical and solid state relays, • Cable testing - Tan Delta, Power Factor, VLF, DC Hipot, • Automatic transfer switch troubleshooting, • Low, Medium and High voltage switchgear and circuit breaker testing, • Moderately complex relay calibration and power metering., • Must be able to drive daily locally/regionally and be available for periodic overnight travel., • Prefer an Associate's degree from an accredited 2 year technical college in Electrical Power & Controls (EPC), or a EE Degree from an ABET accredited college, similar experience and training from the military (Army Prime Power, Air Force Electrical Power Production, or NAVY Seabee), • NETA Certification (I, II, III or IV) or similar desired, • Must have at least 2 or more years of relevant experience performing switchgear testing & troubleshooting., • Must have good PC skills including email, internet, data entry and Microsoft Excel; experience with PowerDB a plus., • Must be able to work safely and adhere to all electrical safety procedures., • Must be able to stay Drug-Free; you will be required to pass a pre-employment hair follicle drug test and periodic, unannounced random drug tests., • Must have an acceptable pre-employment criminal background check., • Must be physically fit to to crawl, climb, stand, walk and lift up to 75 lbs., with or without reasonable accommodations. Must be able to pass a fit for duty physical exam., • Must have a valid driver's license, and currently have and be able to maintain a good driving record., • Must be willing to work flexible hours and overtime, and occasional weekends, holidays and nights., • Must not currently or in the future require sponsorship to work in the U.S., • Must be able to read, write, and speak English fluently, • Must be willing to travel; minimum 40%. Shermco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Shermco is a drug-free workplace. NO AGENCIES PLEASE USD $50.00 - USD $70.00 /Hr.

Location US-TX-Irving ID 2026-2162 Category Technician Position Type Full-Time Remote No The Field Service Technician - Electrical Testing will be responsible for performing electrical testing, maintenance, and repair services on electrical distribution systems and equipment. The technician will work with a team of professionals to ensure that all work is completed safely, efficiently, and to the highest quality standards. Shermco Industries is seeking a NETA Field Service Technician Field Service Test Technicians travel to customer sites (industrial & commercial) to inspect, test, troubleshoot, perform start-up and collect data of low, medium and high voltage (480 Volt to 600 kV) electrical systems. • Instrument transformer tests, • Power transformer testing - Doble, TTR, Insulation Resistance, etc., • Test both electro-mechanical and solid state relays, • Cable testing - Tan Delta, Power Factor, VLF, DC Hipot, • Automatic transfer switch troubleshooting, • Low, Medium and High voltage switchgear and circuit breaker testing, • Moderately complex relay calibration and power metering., • Must be able to drive daily locally/regionally and be available for periodic overnight travel., • Prefer an Associate's degree from an accredited 2 year technical college in Electrical Power & Controls (EPC), or a EE Degree from an ABET accredited college, similar experience and training from the military (Army Prime Power, Air Force Electrical Power Production, or NAVY Seabee), • NETA Certification (I, II, III or IV) or similar desired, • Must have at least 2 or more years of relevant experience performing switchgear testing & troubleshooting., • Must have good PC skills including email, internet, data entry and Microsoft Excel; experience with PowerDB a plus., • Must be able to work safely and adhere to all electrical safety procedures., • Must be able to stay Drug-Free; you will be required to pass a pre-employment hair follicle drug test and periodic, unannounced random drug tests., • Must have an acceptable pre-employment criminal background check., • Must be physically fit to to crawl, climb, stand, walk and lift up to 75 lbs., with or without reasonable accommodations. Must be able to pass a fit for duty physical exam., • Must have a valid driver's license, and currently have and be able to maintain a good driving record., • Must be willing to work flexible hours and overtime, and occasional weekends, holidays and nights., • Must not currently or in the future require sponsorship to work in the U.S., • Must be able to read, write, and speak English fluently, • Must be willing to travel; minimum 40%. Shermco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Shermco is a drug-free workplace. NO AGENCIES PLEASE USD $60.00 - USD $80.00 /Hr.

Job Description Job Overview: The IT Field Network Technician will lead the planning and onsite installation, repair, and support of the IT server, network and security systems, and low-voltage cabling. Engage with business stakeholders, vendors, and across multiple IT teams. They will establish, maintain, and retire IT facilities in the successful and on-time delivery to internal customers and projects. This position will be hybrid with travel to project locations. Key Responsibilities/Accountabilities: • Install and troubleshoot IT server, security and network systems and low-voltage and structured cabling., • Assist in the configuration of network LAN/WAN and Infrastructure equipment., • Serve as the primary point of contact for assigned projects and coordinate supporting activities across multiple teams., • Understanding customer issues, determining root causes, researching solutions, and ensuring appropriate resolution is provided in timely manner., • Perform maintenance related to IT facilities and networks across all company locations traveling across the United States and Canada., • Maintain and complete accurate installation, inventory, and documentation., • High School Diploma or Equivalent required., • 2-5 years of IT Support experience with a positive track record of customer satisfaction., • Must have a working knowledge of PC and MS Office products., • Must have basic knowledge of data communications, wired and wireless networking and computer networking principles, such as TCP/IP, DNS, DHCP, VLANs, LAN/WAN networking and network security., • Proficient in utilizing technical tools such as cable testers and fiber testers preferred., • Ability to travel 60% to 75% of the time., • 1-2 years of experience with structured cabling and cable management, not limited to aerial, buried and underground wiring., • 1-2 years of installation and troubleshooting experience with IT systems/network equipment., • Experience with cellular data communications and cellular signal booster installation., • Experience working with HPE Aruba, Cisco Meraki, Dell Networking., • Structured cabling and network certifications (BICSI, CCNA, NETWORK+)., • Experience deploying burglar alarm, networked security cameras/recorders., • Motivated to learn and grow their IT skills., • Ability to communicate across multiple teams and clearly articulate requirements and business needs., • Diligence and commitment to ensure successful implementation and delivery to the customer., • Good oral and written communications skills., • Strong troubleshooting and critical thinking skills., • Motivated individual who wants to integrate with multiple teams to complete initiatives., • Familiarity with general work safety practices, around office and field construction sites., • Valid driver’s license and the ability to fly and drive long distances on and off road., • Ability to work under deadline pressure with several responsibilities at the same time., • Proven organizational skills., • Ability to work in remote and challenging locations, but not limited to rooftops, construction trailers and across all types of geographic locations. Primoris Services Corporation is a premier specialty contractor providing critical infrastructure services to the utility, energy, and renewables markets throughout the United States and Canada. Built on a foundation of trust, we deliver a range of engineering, construction, and maintenance services that power, connect, and enhance society. On projects spanning utility-scale solar, renewables, power delivery, communications, and transportation infrastructure, we offer unmatched value to our clients, a safe and entrepreneurial culture to our employees, and innovation and excellence to our communities. To learn more, visit and follow us on social media at @PrimorisServicesCorporation. Benefits: • 401k w/employer match, • Health/Dental/Vision insurance plans, • Paid time off, • 10 paid holidays We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Agency Statement: We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-RM2 #PSCLI

Job Description Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From our humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Thompson Pipe Group is looking for an Electro-Maintenance Technician which is responsible for maintaining, troubleshooting, repairing, and installing electrical, mechanical, hydraulic, and pneumatic systems throughout the steel pipe manufacturing facility. This role supports continuous production by minimizing downtime, ensuring equipment reliability, and maintaining a safe working environment in compliance with company policies and regulatory requirements. Thompson Pipe Group is currently looking for an Electro-Maintenance Technician! Pay: $25.00 - $35.00 per hour, based on experience Shift: 5:00 AM – 3:30 PM, 1st Shift. Full-Time, Overtime Available Location: Grand Prairie, TX The Electro-Maintenance Technician. Essential Duties & Responsibilities: • Troubleshoot and repair mechanical, hydraulic, pneumatic and/or electric/electronic equipment, including, but not limited to hoists, cranes, power supplies, boilers, scales, motors, gearboxes, cylinders, gauges and test equipment., • Plan and perform work requiring a thorough knowledge of electrical and mechanical theories and principles, local and national codes, properties of various materials and principles of operation and application of electronic equipment., • Install, start up and shut down equipment in accordance with company safety procedures and OSHA requirements for machine activation and shutdown., • Advise operators and line mechanics of operational procedures and requirements for working safely with electrical/electronic and mechanical equipment and components., • Inform appropriate management and line operators of potential equipment problems and inherent dangers involved., • Have a thorough knowledge of electrical/electronic components, including the use of special diagnostic instruments, with the ability to install, test, diagnose, repair and maintain a variety of production and building equipment., • Must be able to work well with all levels of personnel, whether individually or in a team., • Have working knowledge of troubleshooting Programmable Logic Controllers (PLC) and AC/DC motor drives., • Repair electrical components such as transformers, wiring and electrical/electronic equipment., • Adjust to and follow new procedures and innovations which would add to the efficiency and safety of the operation., • Other duties that may be required., • Qualifications:, • 5+ years of experience as an electrical technician in a manufacturing environment., • Ability to perform the duties of Maintenance II., • Ability to read and write in English (Spanish is a plus) and communicate and work with all levels of personnel., • Ability to work with high voltage/low voltage electricity. Intermediate electrical experience in 3-phase motor branch circuits., • Have math aptitude for measurements, calibrations and comprehension of a variety of testing and diagnostic equipment, • Be available for emergency service during off hours, • Bilingual English/Spanish would be helpful but not required, • Military experience preferred but not required, • Have compliment of tools necessary for high level maintenance tasks, • Have good mechanical/pneumatic/hydraulic aptitude, • Can work well with others and provide positive leadership, • Have a desire to participate in the overall effort to keep all operations running smoothly and cleanly, • Must be able to follow all safety procedures, • Pass the drug test, • Pass technical assessment addressing job-critical maintenance knowledge areas, • Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings)., • Experience with product manuals (e.g., reading and applying knowledge to make repairs)., • Experience with troubleshooting electrical and mechanical breakdowns (pinpointing and fixing breakdowns)., • Experience with reading mechanical drawings (e., hydraulics, pneumatics). EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Dallas Equal Opportunity Employer, and we pride ourselves on recruiting, employing, training, compensating, and promoting regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law.

Job Description Are you ready to dive into the heart of the Central Texas and become a Boiler Controls Technician at Ergon, Inc? This isn't just a job; it's an exhilarating adventure in the natural resources industry! With a competitive pay scale of $35 - $48 per hour, your skills will be recognized and rewarded. You'll work alongside a vibrant team that believes in fun and forward thinking, all while tackling unique challenges with your problem-solving skills. Your expertise isn't just valued; it's essential for creating a safer and greener future. Embrace the opportunity to grow with a company that champions integrity and selfless leadership. Your path to empowerment starts here! You can get great benefits such as medical insurance, 401(k), profit sharing, vacation, holidays, sick leave and life insurance. Dental and long-term disability insurance are offered. Any offer of employment will be contingent on a routine background check, a pre-employment drug screen and an acceptable motor vehicle report. We are an EEO/AAP employer. Unleash your potential and apply today! Why Ergon, Inc.? Ergon supports employees' professional growth, empowers them to lead, innovate and serve, and embraces Selfless Leadership by focusing on the greater good. Make a Difference as a Boiler Controls Technician: As a Boiler Controls Technician at Ergon, Inc., you can look forward to an engaging day-to-day experience filled with hands-on tasks and continuous learning! Your journey will kick-start with routine inspections and maintenance of boilers and thermal fluid heaters across the Ergon network, ensuring everything runs smoothly and efficiently. You'll tune and optimize burner combustion systems, collaborate closely with your team to solve problems and utilize your electrical skills to maintain a safe and effective environment. Enjoy the stability of a guaranteed 40-hour workweek with a flexible schedule - work four 10-hour days (4/10s) from late spring to early fall, giving you long weekends! Weekend and after-hours callouts are rare, and travel typically follows a Monday-through-Friday schedule, allowing you to enjoy your evenings and weekends. Plus, with the potential for over 300 hours of overtime annually, you'll have ample opportunities to refine your expertise. Due to the nationwide spread of our facilities, this position requires up to 75% travel. Trip duration is capped at 2 weeks for the rare jobs that extend through the weekend. Job Duties: • Service, repair, troubleshoot, and perform preventive maintenance on firetube boilers, thermal fluid heaters and other fired equipment, • Maintain records of all service and repairs and ensure a safe and clean working environment by, • complying with all procedures, rules and regulations, • Work with co-workers and associates to develop and maintain strong working relationships in a cooperative work environment, • Maintain safe work practices and good hazard recognition in all aspects of the job., • Competent with electrical multi-meter and 120vac and low voltage control circuitry, • Proficient in reading and interpreting electrical schematics, • Preferred experience with parallel positioning combustion control such as Fireye, Siemens and Autoflame, as well as experience with VFDs, PLCs, single-loop controllers and other electronic controls, • The person chosen must be capable of lifting or moving objects that weigh 50 pounds or more and perform tasks that involve bending, lifting, and climbing tanks or other structures We're looking for talented individuals like you to join our team and help us achieve our goals. If you're passionate, driven and committed to making a difference, we want to hear from you! Don't wait apply now and take the first step toward a fulfilling career with endless possibilities. Let's work together to make great things happen! We are an EEO/AAP employer. Employment offer contingent upon pre-employment drug test, background check, and MVR. Job Posted by ApplicantPro

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Starting Wage $35.50-$40 per hour 1st Shift: (6:00 AM - 4:00 PM). Monday-Fri every other Saturday DUTIES AND RESPONSIBILITIES Maintenance Technician II is an Electro-Mechanical position and responsibilities will include but not be limited to supporting manufacturing operations, adjusting and repairing equipment as needed, tracking usage of and ordering replacement parts. • Diagnose and repair complex electro-mechanical problems with manufacturing equipment, • Perform detailed setup on equipment including recipe changes and control adjustments, • Repair and keep mechanical machine components in top operating condition, • Perform simple to complex mechanical Preventative Maintenance Tasks following instructions, • Intermediate understanding of electrical principles such as voltage, current and resistance, • Diagnose and repair electrical control circuits, field devices, sensors, photo eyes, etc., • Intermediate understanding of electrical safety and motor control circuits and programmable drives, • Troubleshoot the inputs and outputs on PLC and repair issues, • Complete projects to add electrical circuits and controls, new equipment and relocate machines, • Maintain and repair pneumatic systems including repairs of cylinders and other components, • Perform simple to complex mechanical Preventative Maintenance Tasks following instructions, • Enter all work completed in computer-based maintenance program, • Monitor and report spare parts usage including completing parts order forms, • Adjust equipment based on Statistical Process Control data and team with QA, • Train new and Level 1 mechanics in more complex tasks and skillsQualifications, • Associates degree in related field is desired, • Minimum 3 years’ maintenance experience in a manufacturing environment, • Knowledge of and experience with Lock-Out, Tag-Out procedures, • Able to strictly adhere to safety policies/procedures and be committed to customer quality, • Must be available for regular standby assignments; work scheduled off-hours and emergency overtime as required, • Proficient in Word and Excel, • Must be willing to attend training sessions as needed, including out of state locations, • Ability to assist in Training Level I Technicians, • Intermediate knowledge of fabrication (ex. welding, basic machining), • Possess strong work ethic and knowledge of intermediate troubleshooting, • Able to read printed materials, blueprints, schematics, and computer graphics, • Excellent verbal and written communication skills, • Ability to work independently and within a team, including the ability to establish and maintain cooperative working relationships employees, vendors, contractors, and suppliers, • Ability to show attention to detail in a very fast paced environment, • Flexible and willing to work overtime as required Additional Information Location: 9001 Ambassador Row Dallas, TX 75247 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Industrial Maintenance Technician At WhiteWater Express, we are more than just a car wash; we are a company built on respect, communication, and a passion for people. Our dedicated team members are leaders within the company, and we believe that personal growth is the key to our organizational success. If you are a self-starter, motivated, and ready to take on new challenges, we want you to succeed with us, as a part of a rapidly growing business. Position Overview The Industrial Maintenance Technician is responsible for ensuring the proper operation, maintenance, and repair of industrial equipment and machinery. The technician will perform preventive maintenance, diagnose issues, and implement solutions to keep production running smoothly. Key Responsibilities • Travel to various locations for the repair and installation of car wash equipment., • Diagnose and address equipment issues, ensuring efficient functionality., • Perform preventive maintenance alongside store teams., • Keep operations leadership informed with regular updates on repair progress., • Install, maintain, and troubleshoot mechanical and electrical components in the car wash tunnel and equipment room., • 3+ years of experience with mechanical and electrical expertise., • Electrical Systems:, • 480V/230V 3-phase MCC troubleshooting and repair., • VFD troubleshooting and installation., • Low voltage control systems., • Mechanical Systems:, • Hydraulic and pneumatic repair and troubleshooting., • Air compressor repair and maintenance., • Chain drive conveyor maintenance and repair., • Strong analytical skills with the ability to work independently and diagnose issues efficiently., • Willingness to tackle new and exciting challenges daily., • Must be able to lift 50 pounds., • Ability to work in outdoor, all-weather, and rapidly changing environments., • Comfortable coordinating efforts with contractors and vendors., • Must be willing to travel to store locations to complete daily tasks., • A team player who thrives on working with others to achieve results., • Brings professionalism, a strong work ethic, and integrity to the role., • Available for a rotating on-call schedule, including after-hours service needs., • Must have reliable transportation., • Must pass a background check and MVR check., • Competitive Compensation in Base and Bonus Potential, • Comprehensive Health Benefits (Medical, Dental & Vision), • Pet Insurance available for your furry friends healthy and happy, • PTO starts on day 1 because we believe in a work-life balance., • Paid Time Off in addition to Company Paid Holidays, • 401(k) Retirement Plan with Company Match, • Company-Paid Life Insurance, • Pathways to Advancement, • Overtime is available Powered by JazzHR QikdeD1OI6

Job Description You’ll make a difference by: * Maintaining quality of high custom and sophisticated products for Electrical Products; testing and inspecting Low Voltage Switchgear and Switchboards to applicable standards (i.e. UL1558, UL891, IEEE, etc) * Use multi meter and electronic theory to verify power readings and circuit design to ensure accurate wiring and operation. * Use Hipot, test card, hand tools and various other tools to aid in testing. * Use specialized software for testing/inspecting when required (i.e. Siemens WinPM, Step 7, MicroWin, WinC Flexible, SAP, etc.) * Perform inspections/audits of mechanical and electrical assemblies. * Maintain and input records or reports related to testing/inspecting activities. You’ll win us over by having the following qualifications: Basic Qualifications: * High School Diploma/GED * 2+ years exposure to electrical components or knowledge of electrical components. * Ability/Experience testing and fixing; strong problem solving. * Ability to read and interpret technical drawings and specifications. * Microsoft Office skills (Excel, Word, PowerPoint, Outlook) * Excellent organizational, communication, leadership, and interpersonal skills. * Excellent problem-solving skills, and a strong work ethic. * Legally authorized to work in the United States on a continual and permanent basis without company sponsorship Preferred Qualifications: * Associate Degree. * 2+ years in capacity of engineering or quality functions for power distribution equipment. * Knowledge of prevailing codes (UL1558, UL891, UL508). * Knowledge of power distribution components (breakers, relays, communication devices).

Job DescriptionJob Overview We are seeking a skilled Low Voltage Service Combo Technician with experience in fire alarm, security, and access control systems to support commercial and industrial projects. This role offers the opportunity to work on large-scale installations, upgrades, and service work across multiple job sites.This position is ideal for a well-rounded technician who is comfortable working in the field, traveling as needed, and interacting with customers while delivering high-quality installations and service. Key Responsibilities • Install, service, and troubleshoot fire alarm, security, and access control systems, • Perform system upgrades, device replacements, and new installations, • Read and interpret blueprints, schematics, and wiring diagrams, • Conduct inspections, testing, and maintenance of low-voltage systems, • Diagnose and resolve system issues efficiently, • Ensure all work is completed in compliance with applicable codes and safety standards, • Communicate effectively with customers, project managers, and team members, • Maintain accurate documentation of work performedProject Types, • Commercial buildings, • Industrial facilities, • Warehouses and distribution centers, • Retail spaces, • Office environmentsWork OptionsService Technician, • Troubleshooting, inspections, and service work, • Primarily local work with limited travel, • Home most nightsCompensation ($30-$42 p/hr), • Competitive hourly pay based on experience and certifications, • Additional compensation for licensed and certified technicians, • Travel pay and per diem (for traveling roles)Preferred Qualifications, • Experience with:, • Fire alarm systems, • Access control systems, • Security / intrusion systems, • CCTV systems, • Strong troubleshooting and diagnostic skills, • Ability to work independently and on a team, • Experience in commercial or industrial environments, • Good communication and customer service skills, • Valid driver’s license and clean driving recordCertifications & Licensing (Preferred), • State-specific Fire Alarm License (where applicable), • NICET Certification (any level), • Manufacturer certifications are a plusNote: Highly experienced technicians without current licensing may be considered depending on experience and project needs.Physical Requirements, • Ability to lift, carry, and move equipment (up to 50 lbs), • Comfortable working on ladders, lifts, and in various job site conditions

Job Description Commercial Building Maintenance Engineer Overview We are seeking a dedicated Commercial Building Maintenance Engineer professional to join our commercial property management team. The ideal candidate will have a strong background in Commercial Building maintenance tasks and problem solving. Responsibilities • Perform routine maintenance and repairs on Commercial Building systems and equipment, • Respond to and resolve tenant requests and inquiries in a timely manner, • Conduct regular inspections of building systems to ensure proper functioning and identify potential issues, • Troubleshoot and diagnose problems with electrical, plumbing, HVAC, and other building systems, • Complex mechanical: 3 years (Preferred), • Commercial Building maintenance: 5 years (Preferred), • Previous experience in a similar role as a maintenance technician or related field, • Strong customer service skills with the ability to effectively communicate with tenants and contractors, • Knowledge of industrial electrical systems, including high voltage and low voltage, • Ability to analyze complex problems and develop effective solutions, • Pneumatic controls experience, • Cooling tower cleaning, motors, filter and belt replacements, • Roof top unit experience, • Painting projects, • Knowledge of IMPAK is a plus, • Valid driver's license with a clean driving record We offer competitive compensation, benefits package, and opportunities for career growth. If you have the qualifications and experience, we are looking for, we encourage you to apply. Job Type: Full-time Pay: $28.00 - $35- per hour Expected hours: 40 – 45 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance Schedule: • Monday to Friday, • On call - rotating, • Weekends as needed Work Location: In person

Job DescriptionAre you Smart, Driven + Pretty Damn Cool? Tangram is looking for extraordinary people to join our industry-leading team that keeps defining the future of interior environments. An inspirational and fun working working environment, an innovation-driven, fast-growing company, ambitious projects and an incredibly talented team are just a few reasons why you'll love it here. Tangram Interiors: Join the Family Primary FunctionThe AV Technician is an entry-level role focused on learning and supporting the installation of commercial audiovisual systems. This position is ideal for individuals who are eager to develop technical skills, gain hands-on experience, and build a career in the AV industry. Working under the guidance of senior staff, the AV Technician plays a critical role in delivering high-quality installations and supporting project success. Responsibilities: · Pull, terminate, label, and test AV cabling under the supervision of senior technicians.· Assist with the installation of equipment such as displays, projectors, speakers, microphones, racks, and control devices.· Maintain clean and organized work areas, tools, and vehicles.· Support Lead Technicians in performing system setup, testing, and troubleshooting.· Follow company safety policies and industry best practices on all job sites.· Accurately document work performed, including labeling, redlining drawings, and updating project notes.· Continuously develop technical skills through training, mentorship, and hands-on experience.· Demonstrate professionalism when interacting with clients, contractors, and team members.· Contribute to the successful completion of projects by assisting with tasks as directed. Qualifications, Skills, Experience, Education, Certifications:· Ability to read schematics.· Ability to tune and tweak audio systems.· Strong soldering skills.· Audio and video cable fabrication.· Cable pulling and rack fabrication.· Familiarity with Creston and AMX control systems, audio consoles, power amplifiers, digital signal processors, video matrix switchers, video scale interfaces and digital video records.· Able to bench test equipment and when needed prepare equipment to be sent out for repairs.· A strong sense of urgency in solving customer requests to ensure timely resolution is critical.· Must be capable of working at heights and have good balance, may be required to lift heavy equipment up to 50 pounds.· Strong written and verbal communication skills and the ability to multi-task in a fast-paced environment are essential.· Must be a self-starter and a team player.· Must be willing to undergo and successfully pass a background check.· 0–2 years of experience in AV installation, electrical, low-voltage, or related trades (training provided for the right candidate).· Basic knowledge of hand tools, power tools, and safe work practices.· Willingness to learn AV standards, cabling methods, and installation practices.· Ability to read and follow instructions, drawings, and technical documents.· Strong attention to detail and a commitment to quality workmanship.· Good communication skills and ability to work effectively as part of a team.· Physical ability to lift and maneuver equipment, work on ladders/lifts, and perform tasks on active construction sites.· Valid driver’s license and reliable transportation required.· Interest in pursuing AV industry certifications (CTS, CTS-I) is a plus. Education, Experience, and Certifications:· Bachelor’s or Associate’s Degree preferred; will also consider Technical school training with electronics/installation training and related experience.· 3+ years of experience with AV installation of various sizes.· InfoComm CTS and/or CTS-1 preferred.· Valid Driver’s License and a Motor Vehicle Record that meets Tangram’s driving standards. Physical Demands:· The duties of this position require the ability to bend, kneel, crawl, climb ladders and to stand for long periods of time.· Candidate must be capable of working at heights and have good balance.· Candidate may be required to lift, push or pull heavy equipment up to 50 pounds.· Adverse conditions may include noise and dust.· Operate a motor vehicle.Tangram Interiors is an equal opportunity employer, which means we comply with all federal, state and local laws that prohibit discrimination when making all decisions about employment. Our policies prohibit unlawful discrimination on the basis of race, religion, color, national origin, ancestry, sex (including gender and gender identity), pregnancy, childbirth and related medical conditions, age, physical or mental disability, medical condition, genetic information, marital status, sexual orientation, citizenship status, AIDS/HIV status, political activities or affiliations, military or veteran status, status as a victim of domestic violence, assault or stalking or any other characteristic protected by federal, state or local law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently seeking a skilled Security Technician to join our team and support Dallas data center projects. This role focuses on installing CCTV security cameras. Ideal candidates will have hands-on experience in commercial environments and a strong understanding of low-voltage installation practices. This project has already kicked off and the work is immediate. Responsibilities: * Install, terminate, and test low voltage cabling (Cat5e, Cat6, coax, etc.) for CCTV and access control systems * Mount, configure, and aim CCTV cameras; verify video feed and ensure full system functionality * Run cable in various commercial environments, including ceilings, walls, and conduit * Install and secure door hardware and access control components such as strikes, maglocks, readers, and request-to-exit devices * Read and follow blueprints, scope of work documents, and wiring diagrams * Maintain a clean and organized job site and ensure compliance with safety protocols * Work independently or as part of a team to meet project timelines and customer expectations * Communicate effectively with supervisors, clients, and other trades on-site Qualifications: * 2+ years of experience in low voltage installations (CCTV, cable drops, access control) * Familiarity with tools such as punch-down tools, cable testers, fish tape, drills, and hand tools * Ability to read and interpret technical drawings and blueprints * Experience with commercial installation environments * Comfortable working on lifts, ladders, and in ceiling spaces * Reliable transportation to job sites on the west side of Phoenix * Must be able to pass a background check and drug screening if required by the project Preferred: * OSHA 10 certification * Experience with major CCTV systems (e.g., Avigilon, Axis, Hanwha, etc.) * Experience with access control systems (e.g., Softwarehouse, Lenel, Genetec) Compensation: * $25- $35/hr depending on experience * Consistent opportunity for overtime * Weekly pay #SEG3

Job Description Onsite: Travel: 0% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Compensation + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! Maverick Power is seeking an Electrical Test Technician to inspect, test, and verify low- and medium-voltage switchgear before it leaves our facility. This role ensures all products meet specifications, quality standards, and customer requirements. You will operate test instruments, validate protective relays, and document all results. Limited supervision is provided, and attention to detail is critical. Key Responsibilities: • Perform pre-shipment testing of MV/LV switchgear, protective relays, breakers, panelboards, ATS, and associated control/communication systems., • Execute testing procedures including but not limited to:, • Relay functional and coordination testing, • Insulation resistance (megger) and dielectric withstand (hipot), • Contact resistance, timing, and trip testing, • Control and communication circuit verification, • Validate all equipment against project specifications, drawings, and one-line schematics., • Maintain organized test documentation for each project, including reports, drawings, and photos., • Support process improvement initiatives to reduce test time, improve efficiency, and enhance quality., • Troubleshoot and report anomalies; coordinate with engineering for corrective action if defects or non-conformances are found., • Follow all safety procedures, including lockout/tagout, PPE, and adherence to relevant standards (NEC, NFPA, OSHA, NETA)., • Assist in creating and updating test procedures, checklists, and SOPs for factory testing., • Minimum of 5 years' experience testing low- and medium-voltage switchgear in a factory or manufacturing environment or relevant military experience., • Proficiency with testing instruments: relay test sets, megger, hipot tester, multimeter, timing test sets, and secondary/primary injection systems., • Ability to read and interpret schematics, wiring diagrams, one-line diagrams, and project specifications., • Strong documentation skills; attention to detail for accurate test records., • Ability to work independently and maintain production/test schedules., • Familiarity with protective relay brands (SEL, ABB, Schneider, Siemens etc.) and microprocessor-based relays., • Experience with factory pre-shipment commissioning, QA/QC, or manufacturing testing., • Knowledge of primary and secondary injection testing, transformer testing, cable testing, and switchgear coordination studies., • Prolonged periods standing on the manufacturing floor and sitting at a desk and working on a computer. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Location: TBD Reports To: Project Manager / Site Superintendent Job Type: Full-Time Travel: [As applicable] Position Summary: We are seeking a highly organized and experienced Foreman/Supervisor to lead teams of 30–50 technicians based on location in the installation and support of infrastructure within a mission-critical data center environment. This role is responsible for daily supervision, quality assurance, safety compliance, and ensuring project milestones are met on time and within scope. Key Responsibilities: • Supervise and coordinate the work of installation crews (cable techs, electricians, rack & stack teams, etc.), • Ensure work is completed according to project specifications, safety standards, and timelines, • Serve as the main point of contact between field teams and project management, • Maintain accurate documentation of daily progress, workforce attendance, incidents, and material usage, • Conduct daily toolbox talks and enforce PPE and safety protocols on-site, • Oversee the installation of racking, cable tray systems, fiber/copper terminations, and power connectivity, • Identify and resolve field-level issues in real-time to avoid project delays, • Mentor, train, and provide performance feedback to crew members, • Coordinate with logistics and procurement to ensure materials and tools are available on-site, • Attend project meetings and provide status updates to management and clients as neededQualifications:, • 5+ years of experience in data center, electrical, or low-voltage environments; 2+ years in a supervisory or foreman role, • Bilingual (Spanish/English) preferred, but not required, • Proven leadership managing teams of 30–50 workers, • Strong understanding of data center infrastructure, including racking, cabling, and power systems, • Working knowledge of ANSI/TIA, BICSI, and OSHA standards, • Ability to read blueprints, schematics, and technical drawings, • Excellent communication and interpersonal skills, • Comfortable using digital tools for reporting and task tracking (e.g., Procore, PlanGrid, or equivalent), • Ability to adapt to dynamic project schedules and prioritiesPhysical Requirements:, • Ability to work on your feet for extended periods, • Ability to lift up to 50 lbs, • Comfortable working in a construction or live data center environment, • Willingness to work extended hours, weekends, and travel as requiredPreferred Qualifications:, • OSHA 30 Certification, • BICSI Technician or RCDD Certification, • Experience with fiber optic and copper cabling installation standards Powered by JazzHR L3LVQorklI

Job Description Controls Field Service Technician - Dallas, TX Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP / Controls and Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. A fully competent Controls Field Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center or industrial environment - testing and operations. Responsible for programming, integration, implementation commissioning, maintaining and providing emergency support on critical controls systems at customers' sites within their respective regional area. They will troubleshoot, install, and make upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will assist in complete startup, commissioning, and validation procedures of these systems. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of complete BMS, BAS, EPMS - coding, testing and operations. Responsibilities: • Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers., • Install and wire BAS controllers and field devices including low voltage cable terminations, • Installation Coordination of BAS / HVAC Controls Systems, • Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access, • Lead installation teams on daily and weekly meetings, • Support the development and execution of additional services through change orders, • Cutover panels and systems in retrofit projects, • Develop and Implement Methods of Procedure (MOPs) for site activities, • Provide input to project team on developing RFIs, estimating and takeoffs for proposals, • Performs commissioning focused design reviews, prepares commissioning test procedures and reports, coordinates and oversees on-site testing, Startup, Commissioning and Closeout of BAS / HVAC Controls Systems, • Assist software lead with pre-functional and functional testing, • Execute troubleshooting of BAS systems including corrective actions, • Participate in commissioning efforts with external stakeholders, • Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work, • Perform QA / QC of BAS and integrated systems using BAS software tools, • Provide installation inspections and other closeout duties to ensure customer acceptance, • Provide markups for shop drawings to document as-built conditions, • Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress, • Document and track issues and out of scope efforts, • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Discuss with technical support problems related to maintenance or operation of equipment, • Attend project bid walks, engineering surveys, BAS audits, etc, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Needs to be located in Pacific Northwest, • Open to traveling to job sites in the region - 75% of the time, • Critical Facilities / Data Center experience a must, • Experience with Distech Controls and Tridium Niagara BAS Platforms highly preferred, • Preferably 3-8+ years experience with BMS /BAS Controls, • Experience with any of the following systems (JCI, Metasys, Siemens, Honeywell, Automated Logic) a plus, • PLC / ALC Experience, • Experience with critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Requires knowledge of equipment manufacturer's specifications, • Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets, • Ability to follow company and site safety requirements, • Must be able to complete Field Service Reports and Assignments accurately and within a timely manner, • Analyze and prepare documents, reports and correspondence, • Candidate must be willing to work nights & weekends when necessary, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Requires excellent verbal, written communication skills & customer relation skills, • Ability to work independently and resourceful with good initiatives, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Proactive, resourceful, delegator and a multitasker After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSalary: Why Pref-Tech? Voted "Top Workplaces" by Houston Chronicle and Austin American Statesman, 2 years in a row! We aim to make family a core reason we attract incredible people, retain them, and collectively deliver unequaled quality and service to customers. If your heart and mind are pushing you to join a team who deeply desires to be the best in the world, has a long-game approach to business, prides itself on doing exceptional work, celebrates service to others, and is willing to invest in you, you should consider Pref-Tech. Position Overview: A Security System Lead Technician at Pref-Tech will be responsible for leading a small team of security and/or cabling technicians to complete access control, video surveillance, intrusion detection, and related projects safely, within time constraints, at or above quality standards, and within budget. The Lead Technician's duties include, but are not limited to, assisting Project Managers with planning daily tasks, managing materials and equipment, executing installations, troubleshooting, and resolving issues, communicating with customers, reporting progress, conducting quality control inspections, and testing systems. Key Responsibilities: A Security System Lead Technician may be required to perform any of the duties and responsibilities below, but not limited to: • Plan daily tasks with the Project Manager and/or Superintendent., • Conduct safety meetings with team., • Lead, coach, train, manage, and mentor technician team., • Install cabling, mount equipment, install card readers, door contacts, mag locks, electrified strikes, and integrated systems., • Troubleshoot cabling, card readers, door contacts, mag locks, electrified strikes, cameras, PLC's, intrusion detection equipment, and integrated systems., • Maintain a mastery of low voltage systems, relays, principals of normally closed/normally open, series and parallel wiring., • Maintain a general understanding of Ethernet networking., • Master understanding of using multi-meter to test for voltage, continuity, amperage, and resistance., • Possess mechanical and computer skills., • Operate hand tools and equipment necessary to perform all associated tasks, to include lifts., • Document and report progress in a timely manner to Project Managers and customers., • Communicate effectively in written and verbal for with internal staff and customers. Mastery in reading and understanding drawings and equipment schematics is required. • Proven ability to use resources available to them to troubleshoot and resolve issues encountered on projects. Required Qualifications: • High School Diploma or GED Equivalent., • Must be at least 18 years of age., • Must possess a valid TX drivers license, successfully pass an MVR (Motor Vehicle Record) check, and maintain a clean driving record as a condition of continued use of a company vehicle., • At least 5 years of relevant security experience., • At least 2 years of relevant leadership experience., • Willingness to take on new challenges and build on current skills., • Exceptional analytical and conceptual thinking, • Currently licensed or must have the ability to immediately obtain TXDPS Security License., • Familiarity with the following systems:, • Access Control Systems, • Software House, • Genetec, • Honeywell, • HID, • Mercury, • LifeSafety Power, • Video Surveillance/CCTV, • Genetec, • ipConfigure, • Axis, • Hanwha Techwin, • Intrusion Detection, • DMP, • Bosch/Radionics, • Structured Cabling, • Panduit, • Commscope Preferred Qualifications: • Proficiently use MS Word, MS Excel, MS Project, MS Visio, and Adobe, • Understand the basics of IP networking and IP-based equipment, • Low Voltage Industry certifications from ASIS, BICSI, ESA etc. Access Control Manufacture certifications see required familiarity list above. Benefits: • Competitive Salary, • Company Vehicle, • Inclusion in Operational Incentive Program, which shares excess profits as bonuses 401K Safe Harbor Plan with matching dollar-for-dollar up to 4% of annual gross salary (Traditional and Roth options available) • Health, Dental, and other elective insurances, • Travel and Night Work Incentives, • World-class training and professional development Work Hours & Travel: Must be willing to work days and nights. There is no set schedule for field personnel, as work schedules vary depending on client needs. Travel is 10-20% to Pref-Tech offices, job sites, and conferences. Physical Requirements: • Ability to perform physical tasks like walking, standing, driving., • Ability to safely lift and carry up to 50 lbs unassisted., • Comfortable working outdoors in various weather conditions, including heat and rain., • Capable of ascending and descending ladders (614 feet) and stairs of varying heights with minimal restrictions., • Willingness to work from a bucket truck as required for installations and maintenance. Core Values: First and foremost, at Pref-tech, you must understand, internalize, and represent our PGRIT core values: • Professionalism: Our expectations are high, we take great pride in our work, and we communicate well., • Grit: We thrive on challenges. We do what it takes to get the job done., • Right: We know what right is and do it every time., • Intelligent Thought: We plan meticulously, execute decisively, and resolve issues effectively. EEO Statement: Employment is contingent upon successful completion of background investigation and pre-employment drug screen. Pref-Tech maintains a drug-free workplace and conducts random drug screenings as part of our commitment to safety and compliance. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview. Candidate Screening: Employment is contingent upon successful completion of background investigation and pre-employment drug screen as well as successfully passing an MVR (Motor Vehicle Record) check. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview. ADA Accommodation Statement If you require reasonable accommodation to apply for a position or to participate in the interview process, please contact Recruiting at .

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description What to expect as a Commercial Security Installation Technician II: • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Troubleshoot new security installations to ensure the systems are functioning properly and satisfy codes, • Supervise Installation Technician I's on a job as assigned by the Installation Manager, • Drive to client sites, with a company issued vehicle, to perform the system installation and confirm the system is operating effectively and meets contract requirements, • Run electrical wiring; related activities to include drilling, trenching, and aerial runs., • Responsible for the connection of control panels, application requirements, wire concealment and security software installation., • High School Degree, Vocational School or equivalent is required, • 2 to 3 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, programming systems and managing small jobs, • Military veterans are encouraged to apply, especially those with experience as an electronics technician or aviation technician, • Experience with any or all of the following preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possess or has the ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Ability to meet deadlines and work in a fast based environment with minimum direction, • Good communication skills for effective interaction with internal & external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to be on-call on a rotational basis, • Must be detail-oriented and organized Must possess a valid Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a vehicle required. • Ability to complete time entry from home on a daily basis via the Internet, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1563813

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for a Fire Alarm/Intrusion/Access Control Service Technician for work at various retail locations across the United States. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401K and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required, • Company vehicle provided after orientationRequirements:, • Field installation experience in security environments: Fire Alarm /Intrusion / Access Control, • NICET certification (Preferred), • Current/valid state required Physical Security license and/or Life Safety license in the applicable technology., • Knowledgeable about NFPA standards, including NFPA 70 and 72, • W ork schedule mainly during the day 8 am to 5 pm, with some night shifts., • Available and willing to work at heights of 20’-60’ on lifts., • Experience reading blueprints and site maps., • Experience with multiple Intrusion/Access system manufacturers is a plus., • Assist with pre-installation opportunities by designing and planning technical solutions., • Perform new installs and provide technical escalation support both on-site at customer locations as well as remotely via the phone and specialized tools., • Excellent customer relationship and communication skills; verbal and written., • Has basic PPE, and reliable transportation during the training period prior to issuing a company vehicle, • Computer/laptop/smartphone proficiency., • Basic understanding of Microsoft Office Products (Word, Excel, PowerPoint) is a plus., • Highly proficient with the use of email, spreadsheets, and the ability to learn internal systems., • Valid driver’s license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Install, troubleshoot, and repair cabling systems and equipment in IP Video, Access Control / Intrusion Alarm / LAN/WAN infrastructure, and wireless LAN., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit bending work., • Complete all wiring, connections/terminations, and equipment installations ensuring that Access Control and Intrusion systems are complete with total customer satisfaction and contractual requirements., • Install, repair, or upgrade fire alarm systems and program control panels for fire alarm systems with the guidance of building plans and electrical layouts., • Mount sensors at appropriate locations, performing all necessary tasks, such as drilling holes for cabling and accessing locations such as crawlspaces or attics., • Complete all wiring, connections, and equipment installations ensuring that fire alarm systems are in compliance with electrical and fire codes., • Tests to ensure all newly installed fire alarm systems and component devices are operational., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA., • Perform any other duties not specifically statedherein, but which your supervisor may assign., • Ensure all work complies with current codes and regulations., • Assist and collaborate with the Installation Team Lead or Project Manager regarding on-site work schedules and timely delivery of equipment., • Conduct tests to ensure all newly installed systems and component devices are operational., • Troubleshoot new system installations to ensure the proper functioning and to ensure the system meets local, county, state, or federal codes and legal and/or insurance requirements.

Job Description 100% nationwide travel role Company vehicle, gas card, lodging, and per diem provided Top Skills - Must Haves • IP Cameras, • Cat5, • Cat6, • IDFS, • Install, • Cabling 1. Current/Valid State's drivers license - Will be traveling in company vehicle, 2. 2+ years of IP Camera Experience • Installation of IP cameras (axis cameras preferred), • Configuration of cameras and field of view experience 3. Ability to read blueprints, installation scopes, and diagrams • Interview will show blue print and technician will need to know how to read it 4. Experience operating a scissor lift for installations Description Position Overview We are seeking experienced Traveling Cable / Low‑Voltage Technicians to support a large‑scale retail security camera rollout. This role involves nationwide travel, working as part of a team to install, cable, test, and validate IP camera systems according to strict installation and field‑of‑view (FOV) requirements. Technicians will be responsible for complete end‑to‑end installation activities, including structured cabling, hardware mounting, camera configuration support, validation, and documentation. Key Responsibilities Install Axis IP security cameras per approved scope (approximately 35–38 cameras per site) Perform structured cabling (CAT5e/CAT6) from cameras to IDFs Terminate, label, and organize cabling in IDFs and camera locations Test and certify cabling using industry‑standard testing equipment (Fluke preferred) Mount camera hardware using appropriate solutions including: Unistrut Conduit Surface and ceiling mounts Verify network connectivity to required IDFs Support camera configuration verification and firmware checks (in coordination with Help Desk) Assist with Field‑of‑View (FOV) validation to ensure cameras align with shot guide requirements Make physical camera adjustments as requested by the client AP team Return to sites as needed for follow‑up adjustments or corrections Capture and upload required deliverables: Camera images Test results Validation documentation Upload documentation into ServiceNow Follow all site safety, PPE, and customer requirements Work effectively in teams of four on overnight shifts (typically four nights per store) Skills ip cameras, Cat5, Cat6, idfs, Install, Cabling, cctv systems, Punchdown, Low voltage, Cable installation, cctv, Structured cabling, Installation Additional Skills & Qualifications Required Skills & Experience 2+ years experience in low‑voltage or structured cabling environments Strong hands‑on experience with: CAT5e/CAT6 cabling Termination and testing Retail or commercial environments Familiarity with IP security camera installations (Axis experience preferred) Ability to read and follow installation scopes, shot guides, and diagrams Comfortable working in IDFs and ladder/lift environments Basic understanding of network connectivity and troubleshooting Strong attention to detail and documentation accuracy Ability to travel 100% nationwide for extended periods Ability to work overnight shifts and maintain productivity Preferred Qualifications Axis camera installation experience Fluke certification or strong testing experience Conduit bending or light electrical/EMT experience Previous big‑box retail rollout experience (Lowe’s, Walmart, etc.) Experience working with ServiceNow or similar ticketing/documentation systems #WRO Job Type & Location This is a Contract position based out of Dallas, TX. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionDescription: Hiring for Commercial CCTV Traveling Technician in the Austin/San Antonio Area Who are we? Ironsite is recognized in the United States as the leader in perimeter security gate automation, access controls, design, fabrication, installation, and repair of commercial, industrial, and residential perimeter security solutions. Ironsite brands were founded as early as 1980 when gate automation was a specialty niche with only a few individuals knowing how to install and service electric gate equipment. From its beginning, Ironsite has operated the business with a focus on integrity, professionalism, and hard work. Job Summary The Service Technician is responsible providing exceptional service to our customers while performing on-site diagnostic, troubleshooting, preventive and corrective maintenance on a variety of gate and door systems. Essential Duties and Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Provides a positive, collaborative, and informative customer service experience to both residential and commercial customers. Diagnoses the nature of the issue triggering the service call. Confirms authorization to perform the repair, scope, and warranty-related issues are resolved before beginning work., • Performs all necessary preventative and corrective maintenance. Welds, wires, and programs customer equipment as required by the nature of the service call. Ensures all workplace health and safety requirements are met. Maintains housekeeping and security of customer locations and job sites., • Ensures device operates as intended and as desired by the customer. Closes out the call in Service Titan. Documents the scope of work completed and identifies any other malfunctioning customer equipment or opportunities for additional work., • Manages truck inventory and partners with support team to order or purchase specialized equipment, missing parts, and other components and tools. Please note this job description is not designed to over or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time without notice. Requirements: • Proficient in the setup and installation of CCTV systems, Cat 6 cabling, and networking infrastructure., • Familiar with IP addressing and VMS, • Skilled in interpreting blueprints and site maps., • Capable of troubleshooting cameras and switches, • Certified to operate BOOM or scissor lifts, with a comfort level working at elevated heights, • Possesses essential telecommunication tools, personal protective equipment (PPE), • Demonstrates expertise in cabling infrastructure., • Experience in conduit installation, • Familiarity with Axis/March Networks cameras is a positive attribute., • Willingness to travel as necessary for job assignments., • Has reliable/ presentable transportation and holds a valid driver's license with a clean driving record, free from DUI or DWI incidents within the past three years. Required Education and Experience • Education and/or experience equivalent a High School diploma and 3 or more years working with gate operators, electronic controls, or other low-voltage electrical systems, or similar trade-related experience. Associates degree or vocational program with a focus on electro-mechanical systems preferred., • Familiarity with basic welding principles preferred., • At least 2 years of field service-related experience working on-site at customer locations and interacting with customers., • Communications: Able to communicate effectively in written and oral format with diverse individuals. Able to present information and respond to questions with peers, managers, clients, customers, and the general public on technical subjects. Able to read and comprehend written work instructions, technical documents, blueprints, manufacturer instruction manuals and other materials in English., • Math: Able to perform simple addition, subtraction, multiplication and division using standard units of measure and weight., • Reasoning: Able to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to develop logical troubleshooting techniques based on an understanding of the product performance and test requirements., • Time Management: Able to track and prioritize tasks in a fast-paced environment with several simultaneous projects/work orders. Able to work with minimal supervision., • Technology: Knowledge of email, texting, and work order systems sufficient for basic communication, reporting, and notes., • Physical Requirements: Able to push/pull/lift up to 50 lbs. frequently throughout the day. Able to stand, climb, walk, kneel, and crouch frequently, as required at a variety of customer locations/work sites. The physical environment for this position includes construction sites, warehouses, and outdoor customer locations. Frequently required to use and promote use of personal protective equipment to prevent injury. Travel Required Frequent day travel to and from job sites, vendor locations, and offices.

Job Description We are currently seeking 10 skilled Low Voltage Electricians to join our team for an upcoming large-scale infrastructure project. If you are a precision-oriented technician who transitions seamlessly between high-frequency RF connections and high-speed copper data lines, we want to hear from you. Apply now, interview today and get hired the next day ! • RF Termination: Expertly install and terminate various RF Connectors (N-Type, BNC, SMA) onto coaxial cabling with a focus on low signal loss., • Data Cabling: Pull, route, and terminate Cat 6/6a cabling in commercial and industrial environments., • Testing & Validation: Use Fluke or similar certification tools to ensure Cat 6 lines meet TIA/EIA standards and RF connections are within decibel (dB) tolerances., • Blueprint Reading: Interpret floor plans and schematics to execute cable paths and device placement accurately. Whatever custom labor productivity needs you have today or in the future, American Trades Contracting looks forward to being your partner. With access to highly qualified tradesmen, it doesn’t take us long to fill open positions with top talent. As a result, you can expect increased productivity and profitability, allowing your business to grow and take on new challenges. Together, we will make your construction workforce the best it can be!American Trades Contracting is a national staffing firm that was established in 2009. During this time, we have evolved into a trusted industry leader for both clients and contractors. We are dedicated to providing a great place for employees to work and reach their highest career goals. Our strategic approach encourages all contracting employees to develop their skill sets so that they can fulfill the versatile workforce needs for clients in the U.S.\r\nHere at American Trades Contracting, our clients mean everything to us. We take our relationships with clients very seriously and strive to build positive, meaningful connections. To do this, we go beyond traditional staffing services. We serve as an extension of your professional team and someone you can count on day and night to keep things running smoothly.\r\n\r\nWhatever custom labor productivity needs you have today or in the future, American Trades Contracting looks forward to being your partner. With access to highly qualified tradesmen, it doesn’t take us long to fill open positions with top talent. As a result, you can expect increased productivity and profitability, allowing your business to grow and take on new challenges. Together, we will make your construction workforce the best it can be!

Job Description Lone Star Cable Inc. is a small business in Dallas, TX. We are fun, innovative, and creative—and we’re growing! We are currently seeking a Cable Technician Helper to assist with low voltage data cabling for commercial installations. This is a great opportunity for someone looking to gain hands-on experience and grow in the structured cabling field. Pay: $20–$25/hour (based on experience, tools, and job knowledge) Responsibilities include, but are not limited to: • Assisting with the physical installation of structured/low voltage cabling, • Supporting the installation of wire management systems and pulling Cat-6, fiber, and security cable, • Helping with cable organization, dressing, and labeling to industry standards, • Assisting with data room build-outs, including basic terminations and rack and stack support, • Following floor plans and directions from lead technicians, • Using basic hand tools and learning to operate industry tools such as snips, crimpers, toners, punch-down tools, ladders, and lifts, • Maintaining a clean and safe work environment, including proper use of PPE, • 1-3 years of experience in low voltage cabling or related field preferred (willing to train the right candidate), • Ability to take direction and work as part of a team, • Willingness to work in various environments, including ladders, lifts (40’+), crawl spaces, attics, and above ceilings, • Basic hand tools preferred, • Must have reliable transportation

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced and highly motivated technicians to join our team in installing, maintaining, and troubleshooting low voltage systems across industrial, retail, and commercial environments. This role involves extensive travel and hands-on work with structured cabling, CCTV, AV systems, and more. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Choose Wachter: • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company-provided cell phone, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package, Company paid:, • Medical, Dental, Prescription & Vision Benefits--No premium cost!, • Life, AD&D and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings Key Responsibilities May Include a Variety of:, • Install, troubleshoot, and maintain structured cabling systems (Cat5/Cat6, fiber, coax)., • Perform conduit installation, cable dressing, and termination inside IDF/MDF cabinets., • Install and configure CCTV, paging systems, AV equipment, and network devices., • Lead small teams on multi-week projects and ensure timely, safe, and budget-conscious delivery., • Read and interpret blueprints and site maps., • Operate BOOM and/or scissor lifts; work at heights up to 40+ feet., • Conduct system testing and ensure compliance with safety and industry standards., • Maintain accurate documentation and communicate effectively with clients and team members.Qualifications:, • 2–5 years of experience in low-voltage cabling, industrial installation, or AV systems., • Strong knowledge of cabling infrastructure, fiber termination, and AV integration., • Proficiency in Crestron, AMX, DSP programming, and audio calibration is a plus., • Industry certifications (BICSI, OSHA, MSHA, AVIXA CTS, Panduit, Belden, Corning) are highly desirable., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Reliable transportation., • Must have basic telecom tools, PPE, • Comfortable working independently and leading small teams.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal is looking to hire a Security Installation Technician I. The Security Installation Technician I will perform installations of electronic control systems, which may include door access control, CCTV, intrusion detection, low voltage communication and fire alarm systems, including cable management, electronic locks, point sensors, signaling devices and associated hardware. What to expect as a Security Installation Technician I at Allied Universal Technology Services: • Run electrical wiring in a crawl spaces; related activities to include drilling, trenching, and aerial runs., • Responsible for the connection of field devices and wire concealment, • Under the direction of a Installation Technician III or Project Manager:, • Complete all wiring, connections, and equipment installations, ensuring that systems are complete and operational according to contract requirements., • Test new system installations to ensure that they are functioning properly and that they meet local, county, state, and/or federal codes and any licensing and/or insurance requirements, • Complete miscellaneous tasks as assigned, such as job-site clean-up, • High School Degree, Vocational School or equivalent is required, • 0 to 2 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, • Military veterans are encouraged to apply, especially those with experience as an electronics technician or aviation technician, • Good verbal and written communication skills, • Ability to establish and maintain effective working relationships with both internal and external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to meet deadlines, • Must be detail-oriented and organized, • Ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Possess and maintain a valid driver's license and a clean driving record, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2026-1563817

Job DescriptionSr Lead Technician - Security & Access Control We are seeking a Lead Tech with 4+ years of relevant low voltage and/or security field experience (relevant experience can include Access Control, Video, and Intrusion Detection System installation, and/or other low voltage system and component installation). Benefits • Salary: $33 - $40 / hr (Based on experience), • Medical, • Dental, • Vision, • PTO, • Per diem travel, • Holidays, • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 12/18/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Traveling Technician (50–60 Hours/Week)Have you lead other Technicians before? 2+years experience?If you thrive in the fast-paced environment of 500k+ sq. ft. distribution centers and don’t mind the travel, this is the role for you. We’re looking for a hard-working Technician to coordinate daily tasks with the Foreman, operate 40ft+ lifts, and keep our installations on track. We offer steady OT and the chance to run crews on some of the biggest builds in the country. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • MD Live, TriaHealth, Legal Shield, • Company-Matched 401(k) and IRA Retirement SavingsQualifications:, • 2–5+ years of low-voltage or data cabling experience, • Strong Cat6 and fiber termination and testing skills, • Experience with paging, wireless/AP cabling, CCTV, and access control cabling, • Ability to read prints and work with minimal supervision, • Comfortable working at height and in large warehouse environments, • Ability to work independently or support small crews, • Proficient with smartphones, email, and basic spreadsheets, • Basic telecommunications tools, PPE, and reliable transportation, • Valid driver’s license with clean driving record, • Willingness to travel extensively and work 50–60 hour weeksKey Responsibilities May Include:, • Install, terminate, and test Cat6 and fiber (single-mode and multi-mode) cabling, • Perform paging, wireless/AP cabling, CCTV, and access control cabling, • Lead and support small crews of 2–4 technicians as a working lead when assigned, • Build and dress MDFs, IDFs, racks, patch panels, and cable management, • Install cable pathways including J-hooks, ladder rack, innerduct, and tray, • Operate boom and scissor lifts (40+ ft work), • Troubleshoot cabling and system issues, • Ensure cables are neatly dressed, labeled, and installed per standards, • Provide daily progress updates to the Lead or Foreman

Job DescriptionAre you an experienced Lead Installation Technician looking for a company that values your skills and leadership? A Texas-based, family-run cabling and telecommunications company is expanding and looking for a motivated technician to lead their installation team! With over 30 years of combined experience, this team offers a great environment to grow your expertise while working on exciting commercial projects.Responsibilities: • Lead a team of 3-5 cable installers, ensuring smooth operations and clear daily objectives based on commercial blueprints., • Install and maintain video surveillance systems, audio/visual setups, and structured cabling (Cat 5, Cat 6, and fiber optic) at commercial job sites., • Work with ShoreTel and Avaya systems, including IP Office, Partner Edition, and Server Edition, handling programming, maintenance, and repairs., • Diagnose and troubleshoot system failures, identifying effective solutions., • Build strong customer relationships by delivering timely and professional service., • Must have knowledge in pathway systems, fire stop systems, various electronic components, cable tray systems and structured cabling that includes: twisted pair, coax, stranded, and solid conductor low voltage., • Must have prior experience and knowledge with PDK Cloud Based Access Control., • Must have experience pulling Fiber Optic cable., • Must have previous supervisor experience for commercial cable install projects., • Experience working with a hospital setting highly desired., • Dustbuggy experience required., • Audio/Visual, Security data cabling installation experience., • Must have blueprint reading experience ., • Must have experience with Commercial Projects, NOT only residential., • Must have experience pulling and terminating Cat 5, Cat 6., • Must pass background check and drug screen (No felonies in last 7 years). Schedule:, • Monday – Friday, • AM Shift: 7:30AM – 4:30PM (9AM start time on Mondays only), • PM Shift: 5PM – 1:30AM Pay Rate:, • $20-22/Hour, • Pay is negotiable depending on experience. Location:

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Traveling Technician (50–60 Hours/Week)If you thrive in the fast-paced environment of 500k+ sq. ft. distribution centers and don’t mind the travel, this is the role for you. We’re looking for a hard-working Technician to coordinate daily tasks with the Foreman, operate 40ft+ lifts, and keep our installations on track. We offer steady OT and the chance to run crews on some of the biggest builds in the country. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • MD Live, TriaHealth, Legal Shield, • Company-Matched 401(k) and IRA Retirement SavingsQualifications:, • Some low-voltage, data cabling, or construction experience preferred, • Willingness to learn Cat6 and fiber termination standards, • Comfortable working at height and in large warehouse environments, • Ability to work well as part of a team, • Basic hand tools, PPE, and reliable transportation, • Valid driver’s license with clean driving record, • Willingness to travel extensively and work 50–60 hour weeksKey Responsibilities May Include:, • Pull, route, and dress Cat6 and fiber cabling in large warehouse environments, • Assist with paging, wireless/AP cabling, cameras, and access control cabling, • Assist with terminations, labeling, and testing, • Install basic cable supports such as J-hooks and innerduct, • Work from ladders and lifts at height under supervision, • Maintain clean, organized, and safe job sites

Global Market and Technology Leader seeking a Traveling Service Technician This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $26 - $40 per hour A bit about us: Worldwide market and technology leader for metal sawing machines, long material and sheet metal storage systems. Why join us? • Ever changing tasks and environments, creates a interesting and challenging environment, • Tools, communication devices and vehicle supplied as needed, • Performance-driven and competitive pay Job Details Will be responsible for TRAVELING locally to client sites to repair industrial equipment. • Responsible for installations, maintenance and troubleshooting of automated storage and retrieval systems as well as sawing equipment, • Performing the above tasks in a safe and craftsman-like manner., • Work on electrical system, low and high voltage 24V to 480V, • Troubleshoot, change and install electrical components, motors, drives, HMI, PLCs as well as sensors and electronic actors n Inspect, replace and install mechanical components like chains, sprockets, bearings and shafts., • Inspect, change and rebuild hydraulic components from hoses to valves and pumps or motors. Perform daily/weekly inspections as assigned by site supervisor. Perform daily/weekly inspections as assigned by the site supervisor. systems and be familiar with lockout/tagout procedures. Must be familiar with working safely around high and low-voltage systems and be familiar with lockout/tagout procedures. Maintain a clean and safe work environment and maintain clean and effective tools. routine maintenance as assigned by the site supervisor. as assigned by the site supervisor. Clean and lubricate vehicles, machinery and components to ensure safe and efficient operation. Must be able to communicate, on the forms provided, the required documentation for repairs and maintenance performed. Examine parts, checking for breakage, excessive wear, or other damage, and completing routine maintenance as assigned by site supervisor. complete repairs. estimated time frame to complete repairs. Determine parts and materials needed and requisition from the site supervisor. Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals and schematic diagrams. Disassemble broken or defective equipment to facilitate repair; reassemble equipment when repairs are complete. Position vehicles, equipment, physical structures and other objects for assembly or installation, using hand tools, power tools, and moving equipment. Transfer tools, parts, equipment, and supplies to and from workstations and other warehouse areas. Safely adjust, connect or disconnect wiring, piping, tubing and other parts. Safely connect wire to motors, fixtures, and other electrical equipment, replacing switches and fuses, and splicing wire as necessary. Locate damaged air and hydraulic pipes or hoses on machines for repair. Install and repair electronic components of equipment as necessary. Repair, adjust and replace gauges, valves and other regulating equipment. Adjust, align and balance equipment as necessary. Test machines after repair. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches to precision measuring instruments and electrical and electronic testing devices, grinders, welding and soldering equipment. Inspect, repair and replace motors as necessary for material handling systems, material moving equipment and sawing machinery. Weld machinery parts. Fabricate and weld brackets, supports, other necessary devices. Use programming devices for fault tracking and parameterization of electrical control devices such as PLC’s and operating devices. Use specialized tools such as databus testing devices and other diagnostic devices as necessary. Participate in all quality, safety training and job certification requirements for this position. Comply with all company policies and procedures. Perform any additional duties that may be assigned, such as visiting other customer sites. Maintain a good attitude and maintain positive customer relations. Requirements High School Diploma/GED and 1 year technical school, or 4 years on the job training in an industrial maintenance environment. Must be able to use multi-meter for electrical troubleshooting, power tools for mechanical repairs, programmable logic controller for troubleshooting. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to write routine reports and correspondence Ability to speak effectively before groups of customers or employees of the organization Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios, and percentages, and to draw and interpret bar graphs. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must have a valid driver’s license and an acceptable driving record. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Lead Technician / Foreman Large-Scale Infrastructure Projects. Ready to run the show on a 2-million-square-foot canvas? We're looking for a seasoned Low-Voltage Foreman to lead data and fiber crews through massive warehouse and distribution center builds. Prior Foreman or Lead Technician experience

Job Description HiFyve is hiring a Maintenance Technician in Garland TX. Pay: $35 - $45/hr (based on experience) Schedule: 3rd shift 7:30 pm – 6 am A side Monday thru Wednesday, B side Wednesday thru Friday. A side and B side rotate weekends Benefits: • Competitive wage (DOE), • 4 weeks of PTO starting out per year!, • Paid holidays & vacation, • Company paid for Health, Dental, and Vision Insurance Key Responsibilities: • Understanding of electrical schematics and documentation, • 480V 3 phase troubleshooting and wiring, • Low voltage controls, • VFDs and servos, • Welding to include: MIG, TIG, and Arc, • pumps, valves, gearboxes, • Strong mechanical aptitude, • Pneumatic and hydraulic systems operation, • Mill and lathe, • Allen Bradley PLC knowledge to include SLC 500, PLC 5 and Logix 5000 (troubleshooting and program understanding), • Familiar with conveyors, palletizing equipment, case packers preferred, • Utilities boilers, air compressors, and ammonia refrigeration, • Waste water systems Qualifications: • 3 years of industrial maintenance experience., • Ability to troubleshoot Allen Bradley PLC's through a CPU. Familiar with Ladder Logic and RS Logix., • Tabaco Free. If you're interested, apply today!

Job Description Position Summary: Seeking an experienced Senior Electrical Technician to lead and execute complex electrical testing, maintenance, and commissioning activities across customer sites. This role combines hands-on technical expertise with field leadership, project coordination, and client interaction, serving as both a technical authority and a mentor to junior staff. • Travel to customer sites to inspect, test, troubleshoot, commission, and collect performance data on electrical systems, • Maintain, test, repair, rebuild, and replace low-, medium-, and high-voltage switchgear and circuit breakers, • Test, inspect, and troubleshoot low-, medium-, and high-voltage cable installations, • Maintain, test, and repair transformers and associated electrical equipment, • Test and calibrate solid-state and electromechanical protective relays, including relay calibration and power metering, • Conduct low- and medium-voltage motor control center (MCC) and contactor testing, • Start up, troubleshoot, and repair generator controls and transfer schemes, • Troubleshoot and service automatic transfer switches (ATS), • Test and commission protection and control systems for high-voltage substations, • Supervise Trainees, Assistants, and Technicians in the execution of electrical testing activities, • Assign project tasks based on technician skill level and ensure consistent execution across similar testing scopes, • Observe and verify testing procedures to ensure accuracy and compliance, • Complete Job Hazard Analyses (JHAs), including arc flash and shock hazard assessments, • Maintain strict compliance with all applicable regulatory, safety, and quality standards, • Document all test results and prepare detailed field service and project reports, • Review and submit timecards, expense reports, and project documentation, • Act as a technical subject matter expert supporting the sales process with equipment assessments, recommendations, and solutions, • Provide professional, customer-facing communication and technical guidance during field engagements, • Must Haves:, • 7+ YOE in electrical testing and power system services, • Clean Background, drug test, and driving record, • Ability to manage multi-month, medium to large-scale projects, • Should be able to perform the following testing unsupervised and be able to lead teams and organize projects while working on them., • Low-, medium-, and high-voltage electrical testing, including circuit breakers, switchgear/switchboards, MCCs, transformers (CTs/PTs), cables, grounding systems, motors, and protective devices., • Proficient with industry-standard test equipment for primary/secondary injection, hipot/VLF, insulation resistance, DLRO, power factor, turns ratio, winding resistance (Megger, AEMC, Doble, Omicron, Vanguard, Raytech, FLIR, Fluke, HVA)., • Plusses:, • NETA III or IV, NICET equivalent certification, • Familiar with NETA Acceptance and Maintenance Testing Standards

Job DescriptionWe are seeking a skilled Electronic Technician with a strong mechanical and/or electrical background to support instrumentation and monitoring systems used on large-scale construction and infrastructure projects. This role offers hands-on fieldwork, technical problem-solving, and a defined path for career advancement into leadership positions. Key Responsibilities • Install, configure, and commission instrumentation systems including sensors, data loggers, and monitoring equipment on active job sites, • Perform electrical and mechanical assembly, wiring, and system integration, • Troubleshoot, diagnose, and repair instrumentation and related equipment in the field, • Calibrate and test systems to ensure accurate data collection and performance, • Support communication systems including cellular and telemetry-based data transmission, • Read and interpret construction drawings, schematics, and site layouts, • Collaborate with engineers, project managers, and field teams to ensure successful project execution, • 1–3 years of experience in electrical, mechanical, instrumentation, or related technical work, • Construction experience with technical exposure will also be considered, • Basic knowledge of wiring, circuits, and/or mechanical systems, • Strong troubleshooting and problem-solving skills in field environments, • Ability to work outdoors and on active construction sites, • Reliable, self-motivated, and able to work independently or as part of a team, • Valid driver’s license and willingness to travel locally Preferred Qualifications • Experience with sensors, controls, or instrumentation systems, • Familiarity with low-voltage wiring or data communication systems, • Exposure to construction, civil engineering, or surveying environments, • Ability to read blueprints or site plans, • Competitive hourly pay with overtime opportunities, • Direct hire stability with long-term career potential, • Hands-on experience supporting critical infrastructure and construction projects, • Clear and structured path for career advancement About Us At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company’s purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.

Job DescriptionDescription: Title: Electrical Testing Technician Location: Dallas, TX Job Summary: TechPro Power Group is seeking an experienced Electrical Testing Technician to join our team. The successful candidate will perform acceptance and maintenance testing on low and medium-voltage switchgear, circuit breakers, transformers, protective relays, automatic transfer switches, motor control centers, ground systems, etc. This position will require the ability to operate various testing tools and equipment, as well as read and interpret electrical control schematics and diagrams. The Electrical Testing Technician will also be responsible for documenting services by maintaining records and writing technical reports detailing field work performed. Responsibilities: • Perform acceptance and maintenance testing on electrical equipment per NETA standards, • Operate various testing tools and equipment including megger, digital multimeter, Hipot tester, multiamp relay tester, GFI, TTR, primary and secondary injection set, etc, • Document services by maintaining records and writing technical reports detailing field work performed, • Read and interpret electrical control schematics and diagrams, • Perform extensive testing, problem identification, and troubleshooting, • Inspect and service transformers, switchgear, and relays, • Evaluate the operating condition of equipment, • Fundamental understanding of electrical and mechanical testing procedures, • Familiarity with electrical test equipment and fundamentals, • Experience in performing extensive testing, problem identification, and troubleshooting, • Strong background in troubleshooting and performing start-up service, • NETA level II, III, or IV Certification preferred, • Ability to travel: 10-25% (home every day, 70-75% of the time), • Strong verbal and written communication skills, • Negotiable salary based on level of expertise, • Annual bonus Job Type: Full-time Salary: $35.00 - $75.00 per hour depending on experience Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift Physical Requirements This job involves both indoor and outdoor work. While performing the duties of this job, the employee is regularly required to: • Lift, carry and/or move up to 75 pounds repeatedly., • Climb ladders, staircases, step stools, stand, walk, sit, and operate vehicles for extended periods., • Work outdoors in varying weather conditions including intense heat/cold, muddy and wet environments., • Perform precision tasks with instruments and fittings. TechPro Power Group is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. This job description outlines the primary responsibilities and qualifications for the position, highlighting the collaborative and essential skills necessary for success. While we aim to provide an accurate depiction of the role, actual duties may vary based on organizational needs and evolving business requirements. These statements describe the general nature and level of work performed and are not an exhaustive list of all responsibilities, duties, and skills required. #SENTINELPOWER Requirements:

Job Description Position Overview We’re looking for a high-level Commercial HVAC Technician to support a portfolio of large, complex facilities. This role is ideal for a technician who thrives in structured environments, understands critical systems, and can handle everything from routine maintenance to urgent repairs without hesitation. You’ll be responsible for keeping systems running efficiently, identifying issues before they become problems, and stepping in when things need to be fixed—in a timely fashion DUTIES: Maintenance & System Performance • Perform scheduled maintenance on commercial HVAC systems, including air handlers and related equipment, • Replace filters, clean coils, lubricate components, and make system adjustments to maintain peak performance, • Inspect fans, belts, motors, dampers, and airflow components for wear and efficiency, • Keep systems operating clean, balanced, and within design specifications Diagnostics & Troubleshooting • Identify and troubleshoot mechanical and electrical issues across HVAC systems, • Test motors, controls, and system performance to catch problems early, • Work across high, medium, and low voltage equipment, • Make informed repair decisions based on system condition and performance Repairs & Service Calls • Handle service calls and system issues with a strong sense of urgency, • Repair or replace components to restore full system functionality, • Coordinate parts and materials needed to complete repairs, • Ensure work is completed efficiently and correctly the first time Emergency Response • Be available for after-hours and emergency calls when required, • Respond quickly to urgent system issues across supported facilities, • Stabilize and restore systems in time-sensitive situations Documentation & Accountability • Track work performed, system conditions, and maintenance activity, • Maintain clear, organized service records, • Follow company safety procedures and industry best practices, • What You Bring Experience • 4–6+ years of commercial HVAC experience, • Strong background working on large-scale systems and air handlers, • Experience with both preventative maintenance and reactive service, • Strong management and training skills Certifications • EPA Section 608 Certification, • NATE Certification (preferred), • Active HVAC License, • Additional state/local certifications as required Technical Skills • Solid understanding of electrical systems (high/medium/low voltage), • Strong troubleshooting and diagnostic ability, • Ability to read schematics and technical documentation, • Comfortable working independently in the field Work Environment & Schedule • Primarily Monday–Friday daytime schedule, • Rotating on-call responsibilities for emergency service, • Travel between multiple facilities within the assigned area What Sets You Apart • You don’t wait to be told what’s wrong—you find it, • You take ownership of your work and the systems you maintain, • You stay calm under pressure and solve problems quickly, • You understand the importance of keeping critical environments running Compensation & Benefits • Competitive pay based on experience and certifications, • Overtime and on-call pay opportunities, • Steady, year-round work across established facilities, • Growth potential into senior or leadership rolesCompany DescriptionSteira Air is a growing, specialized HVAC and Indoor Air Quality company on a mission to create healthier indoor environments for homes and businesses. With over 30 years of combined industry experience and leadership from HVAC test-and-balance experts, we focus on delivering exceptional air quality and efficient system performance through the use of advanced technologies, including specialized coil cleaning and air quality monitoring systems. At Steira Air, you’ll be part of a team that values quality, innovation, and real results for customers. Our work directly impacts people’s comfort and well-being by improving indoor air quality and extending the life of HVAC systems.Steira Air is a growing, specialized HVAC and Indoor Air Quality company on a mission to create healthier indoor environments for homes and businesses. With over 30 years of combined industry experience and leadership from HVAC test-and-balance experts, we focus on delivering exceptional air quality and efficient system performance through the use of advanced technologies, including specialized coil cleaning and air quality monitoring systems.\r\n\r\nAt Steira Air, you’ll be part of a team that values quality, innovation, and real results for customers. Our work directly impacts people’s comfort and well-being by improving indoor air quality and extending the life of HVAC systems.

Job Description Job Title: Low Voltage Cable Technician Location: Dallas, Texas Company Overview Electra Link has been in business for 40 years and is a leading low-voltage communications company serving Dallas, Houston, San Antonio, and Austin. We specialize in low-voltage construction, audiovisual systems, and special services. As an employee-owned company, we take pride in delivering quality work while investing in our team’s long-term success. Position Summary The Low Voltage Cable Technician is responsible for assisting with the installation, termination, and testing of structured cabling systems in commercial construction environments. This position requires hands-on fieldwork, the ability to work at heights, and adherence to company and client safety standards.Essential Job Functions • Pull, route, secure, test, and terminate low-voltage cabling (Cat6, fiber, coaxial, etc.), • Install and secure support structures, including cable tray, ladder rack, J-hooks, and pathways, • Work from ladders (6ft/8ft/10ft) and operate scissor and boom lifts safely, • Read and follow basic construction drawings and project instructions, • Operate hand and power tools proficiently, • Maintain job site safety and comply with OSHA and company safety standards, • Follow directions from Lead Technicians and Foreman, • Maintain consistent and reliable attendancePhysical Demands & Work Environment, • Lift, carry, and move up to 50 pounds regularly, • Stand, walk, bend, kneel, crouch, and climb for extended periods, • Work at heights and on ladders and lifts, • Work in commercial construction environments, including unfinished buildings, • Exposure to dust, noise, and varying indoor/outdoor temperaturesQualifications, • Strong mechanical aptitude, • Ability to work independently and as part of a team, • Dependable and punctual with strong communication skills, • Flexible schedule, including overtime as needed, • Must pass criminal background check and drug screening, • Must be authorized to work in the United StatesPreferred:, • OSHA 10 Certification, • Bilingual (English/Spanish), • Prior low-voltage or construction experienceBenefits, • Competitive hourly pay with overtime availability, • Weekly pay (every Friday), • Health, Dental, and Vision Insurance, • Employer-paid Life Insurance, • 401(k) with employer matching, • Paid holidays and vacation, • Career growth opportunities oClrwwbhjC

Job Description We are a leading provider of Distributed Antenna System (DAS) solutions for improved wireless coverage and capacity. Our team of experienced engineers and technicians work closely with clients in various industries to design, install, and maintain DAS networks that meet their specific connectivity needs. As a DAS Field Technician at CED Systems, you will be responsible for the successful implementation and optimization of DAS networks. You will work closely with clients, project managers, and other team members to ensure the efficient and effective deployment of DAS solutions. This includes conducting site surveys, designing system configurations, installing and commissioning equipment, and performing troubleshooting and maintenance tasks. Essential Functions: Provide on-site technical expertise during integration, commissioning, testing, and optimizing of distributed antenna systems (DAS) and small cells. Serve as the key technical subject-matter expert within a region and/or program for complex in-building solutions for customers; be the liaison between Sales and the customer on technical matters; respond to technical inquiries and make technical recommendations as appropriate. Work with the technical experts of our customers, carriers, sub-contractors, solution engineers, design engineers, and field technicians to deploy and operationalize distributed antenna systems (DAS) and/or small cells. Lead and perform pre-and post-deployment survey activities for new DAS and small cell deployments utilizing specialized software and tools. Lead and perform pre-and post-deployment RF data collection and analysis efforts to help define and improve coverage requirements. Lead and perform integration and commissioning during system deployments and field trials. Work with design engineers and other stakeholders to identify and correct system issues that surface during deployment and acceptance testing. Make technical recommendations to optimize and correct deficiencies. Document installations in accordance with internal and external standards and requirements, including hardware and software changes made in the field. Review customer deliverables, identify risks and plans to mitigate risks. Review and approve closeout packages. Perform pre-deployment data collection, benchmarking and continuous-wave (CW) testing Turn-up and test DAS and Small Cell systems in accordance with customer and equipment manufacturer’s specifications Support integration and commissioning of equipment during deployments in accordance with system design and customer/carrier requirements Perform post-deployment data collection and acceptance testing to ensure requirements were met for coverage and capacity Troubleshoot and repair DAS and Small Cell systems as required Prepare and submit required project documentation Qualifications • Expert RF Engineer and Inbuilding DAS specialist with deep optimization skills and design experience., • Troubleshooting and analysis skills for walk tests log files, generating reports on DASs performance and providing recommendations to enhance the performance, • Hands-on experience on DAS OEM commissioning vendors: Commscope, SOLiD, Corning, JMA., • 3+ years working in and around the radio frequency industry designing, optimizing, analyzing performance, and troubleshooting repeaters, iDAS, oDAS, and Small Cells for 5G and LTE networks, • Working knowledge of various wireless technologies, (e.g. CDMA, EVDO, GSM, W-CDMA, LTE and Wi-Fi), • Strong working knowledge of RF test equipment (e.g. Spectrum Analyzer, JDSU, Anritsu, Solutelia, etc.), • Strong working knowledge of structured cabling (e.g. CATx etc.), • Working knowledge of First Responder DAS systems, • Ability to read and interpret technical and architectural drawings, • Ability to read and interpret RF designs (e.g. iBwave), • Must be mechanically inclined and able to use both hand and power tools to perform assigned tasks, • Proficient in basic electronic and RF theory, and antenna types and uses, • Proficient in installation, termination, and testing of fiber systems and low voltage cabling systems, • Excellent computer skills, including high level of proficiency with Microsoft Office applications., • Strong focus on continuous process improvement; ability to develop and improve processes., • Ability to build and maintain productive internal and external stakeholder relationships., • Ability to defend technical recommendations., • A high degree of accuracy and attention to detail, • Strong time management and self-organization skills, • Ability to communicate information and ideas clearly and concisely, in writing and verbally, • Ability to actively listen and ask effective questions to accomplish tasks proficiently, • Ability to perform field work at indoor/outdoor venues, • Ability to travel frequently (80%+) Requirements Education and Experience Requirements High school diploma required; college degree preferred A minimum of 4 years of experience in the telecommunications industry Certificates, Licenses, and Registration Requirements: DAS OEM certification desired (e.g. SOLiD, Commscope, ADRF, Zinwave, Nextivity etc.) DAS Test Equipment certification desired (e.g. Solutelia, JDSU, PIM, Anritsu etc.) Cable Vendor certifications preferred (e.g. Andrew, RFS Cablewave, CommScope, Trilogy) Maintain a valid driver license with a driving record that does not exceed company guidelines to permit insurability under company insurance policy. OSHA certification preferred Physical Requirements • Frequent standing, walking, and occasional climbing, stooping, kneeling and reaching., • Must have the ability to stand and walk for long periods of time when working at customer sites and venues., • Occasional lifting and carrying of up to 50lbs., • Vision requires eyesight sufficiently strong enough to permit extended close work and normal color perception., • Hearing and speaking in order to exchange information., • Frequent travel including overnight stays or longer as required., • Willing to work days/nights/weekends depending on project demands. Work Environment Working conditions vary based on the customer site. Work may take place in new or old construction. Exposure to indoor and outdoor conditions with moderate to high noise levels. Exposure to mechanical, electrical, and/or other hazards. Work must comply with customer and/or company safety practices and OSHA requirements. Benefits • Training & Development, • Wellness Resources

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for Low Voltage Project Technicians for project work at various locations across the United States. Candidates should have experience leading jobs with data, voice, alarm, video, and paging systems. This full-time position requires travel and a willingness to learn and help in other structured cabling environments and receive on-the-job training for CCTV. This position requires technicians to travel up to 6 to 8 weeks at a time. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required., • Drive time and mileage paid for use of a personal vehicle when travel is required.Requirements:, • Data Cable Technician with CAT5e, fiber optic, and network experience., • Available for extensive travel, 6 to 8 weeks at a time, road warrior., • Flexible and willing to work on-call, early morning, day, night, and weekend shifts depending on the requirements of the job., • Experience in low voltage cabling, smart hands network replacement, and telephony., • Knowledgeable of all industry standards (NEC, TIA/EIA, BICSI)., • Industry-specific certifications (BICSI, Systimax, Panduit, Beldon, Corning) are a huge plus., • Will primarily be installing new or relocating existing Cat5e cabling from network switches to devices within a retail store. Fiber installation and termination experience is a plus., • Cleanup and management of pre-existing low voltage cables in the ceiling and in network closets., • Install and build-out wall mount network cabinets and floor-mount network racks., • Communicate with on-site customer representatives to determine schedules and timelines for when your work needs to take place., • Highly proficient with using smartphones, computers, email, spreadsheets, and the ability to learn internal systems., • Experience reading blueprints and site maps., • Experience in CCTV, voice, and data cabling is a plus., • Ability to consistently complete projects within budget, on time, and in a safe manner., • Excellent customer relationship and communication skills; verbal and written., • Knowledgeable in identifying independent colors and learning color codes., • Execute advanced troubleshooting skills., • Ability to work in cramped spaces., • Ability to operate a BOOM or scissor lift and work at heights., • Climbing experience is a plus!, • Has basic telecommunication tools, PPE, and reliable transportation., • Must have knowledge of cabling infrastructure., • Experience in conduit installation is a plus., • Maintain the company’s high standard of quality and professionalism with regard to workmanship, customer relations, coworkers, behavior, and appearance., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Learning on-the-job training for CCTV including installing, troubleshooting, and repairing cabling systems and equipment in IP Video, IP Physical Access Control/LAN/WAN infrastructure, and wireless LAN., • Installation, troubleshooting, and maintenance of various cabling infrastructure., • Provide basic setup, installation, and testing services for the following: Phone Systems, Wireless systems (AP, Antennas), and Network devices (routers, switches, servers)., • Ability to provide basic setup, installation, and testing services for the following: Wireless systems (AP, Antennas), and Network devices (routers, switches, servers)., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Perform site surveys, and develop a scope of work and materials list., • Installing cable support structures such as j-hooks, cable racks, and inner ducts., • Conduct tests to ensure all newly installed cable systems and component devices are operational., • Troubleshoot issues with cable networks to ensure the proper functioning and to ensure the system meets local, county, state, or federal codes; legal and/or insurance requirements., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA.

Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Tier 2 Audio Visual Field Technician, you will play a key role in supporting our project delivery teams by installing and maintaining a wide variety of AV technologies across client sites. You will be responsible for ensuring high-quality installations, troubleshooting technical issues, and maintaining strong communication with project stakeholders. **THIS POSITION REQUIRES UP TO 70% TRAVEL. KEY RESPONSIBILITIES: • Provide daily reporting to the Project Management team., • Install a wide variety of AV technology in both existing and new build project sites., • Perform cable management and layout planning for 1st fix hardware, including bracketry and ceiling speaker hardware., • Ensure compliance with general contract requirements during installations., • Apply knowledge of low voltage electrical concepts., • Utilize basic carpentry and installation skills., • Operate power tools safely and effectively., • Diagnose, troubleshoot, and resolve technical problems., • Travel to other sites as needed to support projects and installations. ESSENTIAL CRITERIA: • Experience with AV systems such as Crestron, Extron, QSYS, or Cisco., • Understanding of signal flow and AV rack building to AVIXA standards., • Familiarity with AV industry cabling and connector termination., • Strong sense of urgency and agility in dynamic environments., • Excellent customer interaction skills and professionalism., • Ability to work independently in high-pressure, fast-paced settings., • Commitment to ongoing technical development., • Willingness and eligibility to travel and work globally., • Strong organizational and time management skills., • Effective written and verbal communication., • Critical thinking and problem-solving abilities., • Flexibility and adaptability to changing work hours and customer needs., • Team-oriented mindset., • 1–3 years of experience in the AV/VC industry., • Deeper knowledge of signal flow and AV installation., • Familiarity with Cisco, Extron, Crestron, or QSYS systems., • AVIXA CTS or CTS-I certification., • OSHA 10/30 or SST certification. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. #LI-CC1 Pay Range$32—$41 USD

Job DescriptionWe are seeking an experience low voltage technician to do fire alarm/access control/CCTV installations inside of commercial and industrial settings. Location: Based out of Dallas. Regional travel required (2-4 weeks at a time)Pay: DOE roughly $25-$40 (pier diem and company vehicle provided)Benefits: Medical, dental, vision, prescription assistance, life insurance, 401k, retirement savings all paid for by the company! Note these benefits are offered after probational 90 day period Job type: Contract (90 days) to Perm- If you like what you do and are dependable you may be offered the full time position before the 90 days is up. Note from the recruiter: I will be sending you a text message within 48 hours after your apply to expedite the interview process! This will be a short interview with some basic questions that can be answered via text Requirements: • Must hold current State Fire/Alarm License. (TX DPS), • Experience as a Fire Alarm Project Technician., • Available for extensive travel, 2 weeks away from home at a time within a 4 hour radius of your residence., • Flexible and willing to work on-call, day or night shifts as the jobs require., • Experience reading blueprints and site maps., • Knowledge of fire alarm panels definitely a requirement! Experience in CCTV, voice, and data cabling is a PLUS!!., • Knowledgeable in identifying independent colors and learning color codes., • Ability to work in cramped spaces., • Ability to operate a BOOM or scissor lift, and ability to work at heights., • Has basic telecommunication tools, PPE, and reliable transportation., • Must have knowledge of cabling infrastructure., • Proficient with the use of smartphones, personal computers, including email, spreadsheets, and Microsoft Office programs., • Experience in conduit installation is a plus., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years.Responsibilities:, • Installation, troubleshooting, and maintenance of various fire alarm systems., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Installing of cable support structures such as j-hooks, cable racks, and innerduct., • Conduct tests to ensure all newly installed cable systems and component devices are operational., • Troubleshoot issues with cable networks., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA., • Perform any other duties not specifically stated herein, but which your supervisor may assign.

Job Description About Us [American Industrial Mechanical] is a leading provider of comprehensive facility maintenance and foodservice equipment services. We specialize in HVAC/R systems for commercial and industrial clients as well as full hot-side and cold-side kitchen equipment repair for restaurants, hotels, schools, and healthcare facilities. We're growing rapidly and looking for a skilled senior-level technician to join our expert team and help deliver exceptional service. The Role As a Senior HVAC/R and Hot Side Service Technician, you will serve as a lead field expert, handling complex diagnostics, repairs, installations, and preventive maintenance on both climate control systems and commercial cooking ("hot side") equipment. This hybrid role is ideal for an experienced technician comfortable crossing over between building HVAC/R and restaurant kitchen appliances. Key Responsibilities • Diagnose, troubleshoot, repair, and perform preventive maintenance on commercial HVAC/R systems, including rooftop units, chillers, boilers, split systems, packaged units, VAV systems, refrigeration (walk-ins, reach-ins), VFD's and building automation controls, • Service and repair hot-side commercial kitchen equipment, including gas and electric ranges, convection/ combi ovens, fryers, griddles, broilers, steamers, kettles, charbroilers, and holding equipment, • Install, retrofit, and commission new or replacement HVAC/R and kitchen equipment to manufacturer specifications, • Read and interpret electrical schematics, blueprints, piping diagrams, and technical manuals, • Perform gas line work, brazing, refrigerant recovery/recycling, electrical troubleshooting (low/high voltage), and component replacement (compressors, valves, motors, igniters, thermostats, etc.), • Lead and mentor junior technicians on complex jobs and ensure work meets code and safety standards, • Maintain accurate service records, parts usage, and customer reports via mobile tablet/software, • Provide excellent customer service, explain issues/repairs clearly, and recommend energy-efficient solutions or upgrades, • Respond to emergency service calls (on-call rotation does apply), • 7+ years of hands-on experience in commercial HVAC/R service and repair (senior/journey-level), • Strong experience (3+ years preferred) servicing hot-side commercial kitchen equipment (gas/electric cooking appliances), • Valid EPA Universal Refrigerant Certification (required), • Must be TDLR registered, • Valid driver's license with clean driving record (company vehicle provided), • Ability to pass background check and drug screening, • Strong diagnostic and problem-solving skills with large/complex systems (We work on all equipment 1/2 ton to 250 tons), • Proficiency with hand/power tools, multimeters, manifold gauges, recovery machines, and combustion analyzers, • Excellent communication skills and professional appearance, • Ability to lift 50+ lbs, work in tight spaces/attics/rooftops, and handle physical demands of the trade, • Familiarity with building automation systems (BAS), energy management, or kitchen ventilation/exhaust systems, • Health/Dental/Vision after 90 days of employment, • 401K after 1 year of employment, • Anniversary day off after 1 year of employment, • PTO time begins accruing at 90 days, • Company Vehicle (FOR OFFICIAL COMPANY USE ONLY), • Fuel Card, • Company iPad Tools Provided • Vacuum Pump, • Recovery Unit/Tank, • Leak Detector, • Torch Set If you're a highly skilled technician who enjoys variety, complex troubleshooting, and delivering top-tier service across HVAC/R and commercial cooking equipment, we want to hear from you!

Job Description Who We Are Evergreen Fire and Security (EFS) is a recognized leader in the life safety and security solutions industry. We are entrusted by the Federal Government and commercial customers to protect lives, critical infrastructure, and information by providing and maintaining technically advanced and innovative fire alarm, access control, intrusion detection, CCTV, mass notification, and other critical protection systems. The Key to Our Success Our success is largely due to the experience, skills, and expertise of the best and brightest employees in the industry. Due to growth, we are looking for additional qualified experts to join the Evergreen team. Think you have what it takes? Great! We welcome you to submit your qualifications for this great Evergreen Fire and Security career opportunity. The Opportunity This opportunity as a Traveling Electronic Security Systems Technician is perfect for an experienced low-voltage technician who enjoys traveling! The Responsibilities • Installs, repairs, tests, and maintains security projects, • Serves as the face of Evergreen to our customers onsite by providing top-notch service and product training, • Ensures safety through compliance with relevant State and Federal regulations, • Handles service orders and project administration, • Ability to travel extensively, • Valid CPR/First Aid card, • Valid electrician certificate or trainee card, • High school diploma or equivalent, • Electrical wiring experience, • Basic computer skills (Microsoft Office), • Good communication skills to interface with customers, • Ability to call and schedule appointments, follow instructions, and understand code requirements, • Attention to detail, • Ability to work autonomously, • Ability to work well with others and come to work with a positive attitude, • Valid driver’s license and proof of minimum liability insurance, • Relevant factory certifications and knowledge are always a plus. Great examples include:, • Lenel, • DAQ Access Control/IDS, • Milestone CCTV, • Pelco CCTV, • Monitor Dynamics Access Control/IDS, • AMAG, • Various DDC and Building Utility Control Systems, • Prior experience working on government contracts or military bases Here at Evergreen, we pay competitive wages and benefits, but we also go the extra mile for our Technicians, and even more so for those who travel frequently. Sound good? Check these out: Awesome Travel Perks! • Additional weeks of paid leave for extended travel—up to 320 additional hours of time off!, • Paid flights for weekends at home for regional travel, • Weekly per diem for meals, incidentals, and lodging paid to you, • Paid TSA Pre-Check, • Competitive pay, • Paid Time Off (PTO), • Paid holidays, • Medical, dental, and vision insurance plans, • 401(k) plan, • Up to 4% match available, • 100% vested from day one, • Healthcare flexible spending accounts, • Dependent care flexible spending accounts, • Employee Assistance Program (EAP), • Company-sponsored group term life insurance, • Corporate perks program We also offer opportunities for training and advancement in a fast-paced, inclusive, and rewarding working environment. Check us out on Facebook, LinkedIn, or at . Evergreen Fire & Security is a US government contractor with sensitive access requirements. As our employee, you must also be able to satisfy federal government requirements for access to government information. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. citizenship due to the level of access to sensitive information and/or restricted facilities. Evergreen Fire and Security is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, training, and career development programs. Powered by JazzHR rO318oiKfK