Trabajos manufacturing engineering manager en Clifton, New JerseyCrear alertas

The CDL Shuttle Driver drives passengers to and from assigned locations. Depending on the contractual need this could be around or near an airport, commercial building, hospital, sports arena, entertainment venue, educational facility or warehouse. Schedule: Part-time, Including Weekends Pay Rate: $23.00 - $24.00 per hour The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ___ A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 88M, LS, 3531, 2T1X1 • Transport, load and unload passengers, providing daily transportation services at designated pick-up and drop-off locations, • Ensure the safe loading and unloading of passengers, including the safe operation and handling of specialized equipment for unloading passengers with special needs (i.e• wheelchair lifts and tie-downs), • Help passengers to load and unload luggage as needed • Inspect vehicles on a regular basis to find any unsafe conditions or maintenance issues; perform routine cleaning and bus maintenance activities, • Meet patrons needing assistance to and from various airport locations and lots, • Inspect shuttle for preexisting damage record information using electronic device or manual ticket, • Provide excellent customer service to guests; respond to guest inquiries in a courteous manner, give directions to nearest highway, destination, etc., • Maintain and enforce bus evacuation plan and coordinates bus evacuation activities as appropriate, • Immediately reports any incidents or claims to Operations Manager or Shift Lead, • Refuel and maintain shuttle equipment and fuel use logs, • Maintain a clean work environment, disinfecting shuttle after each use, • Performs pre-inspection and post-inspection activities to ensure proper operating conditions, adherence to prescribed Department of Transportation standards, and compliance with proper safety standards Required: • Must be 21 years of age or older, • No high school diploma, GED or college degree required, • Air Brake experience is required, • This role required a CDL A or B w/ Passenger & Air Brake Endorsements Preferred: • One (1) year of prior work experience as passenger shuttle driver is preferred About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit . ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ABM does not accept unsolicited resumes.

Maintenance Manager Lyndhurst, NJ, USA Company Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description This position is responsible for planning, directing, and managing all technical resources for the Lyndhurst facility, including building, infrastructure, and equipment. The role oversees capital budget projects, maintenance operations, and supervises the Engineering and Maintenance departments. Key Responsibilities: • Develop, implement, and continuously improve a preventive maintenance system; monitor effectiveness and optimize overall equipment effectiveness (OEE), • Manage and supervise the Maintenance Department workforce, including Shift Mechanics and Instrument and Control Technicians; optimize labor and materials utilization, • Lead capital investment projects and major facility initiatives from planning through execution, ensuring alignment with project scope, timeline, and budget parameters, • Train and guide manufacturing teams to ensure proper equipment maintenance and operational capability, • Establish departmental goals and performance standards; provide professional development and coaching to technical personnel, • Develop and administer the Engineering and Maintenance departmental budget in cooperation with management, • Ensure compliance with company policies regarding safety, purchasing, regulatory requirements, and labor relations, including ISO 14000, RC9001, QS9000, and TS16949 certifications Qualifications • B.S. in Engineering (Mechanical or Electrical); advanced degree preferred, • 5+ years' experience in chemical and industrial manufacturing environments with demonstrated project management expertise, • Excellent communication and employee relations skills across all organizational levels, • Strong technical analysis and problem-solving capabilities with ability to function in fast-paced, dynamic environments, • Knowledge of regulatory requirements and industry certifications (ISO 14000, QS9000, TS16949) Additional information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

The Account Manager is responsible for assigned customer accounts and/or geographic territory in the Northeast US, which includes analyzing and meeting customer needs, developing and implementing sales plans, selling products and providing customer support. RESPONSIBILITIES • Sell company products (Industrial Equipment / Machinery) in a highly consultative manner, including the benefits of working with company over competitors, • Increase sales and margins of standard and engineered products to assigned customers and/or territories, • Lead projects from first contact to order while inspiring confidence in the team and management including discussions of application, technology and pricing strategy, • Monitor, manage and update established and new accounts and projects utilizing and regularly updating our internal CRM tool, • Pro-actively prepare for business meetings and guests visits to portray a professional image to customers, • Prepare quotes, proposals, service contracts and other required documents in order to complete a sale, • Ensure clear agreement on purchase orders is reached with customers, • Participate with Project Management in identifying project milestones, examining potential operational issues/risks, outlining and proposing solutions and identifying actions, • Develop customer satisfaction plans for key clients and associated metrics to track improvements, • Pro-actively identify and address support situations that could jeopardize customer satisfaction, • Work pro-actively with other company personnel to identify, communicate, escalate and resolve critical client/project issues in a preemptive and timely manner, • Establish and maintain long term, positive working relationships with internal team members and customers, • Coordinate activities and training of external sales representatives (if applicable), • Assist in achieving companies strategic objectives by aligning resources with goals and pursuing opportunities that meet the department's objectives, • Develop credible sales forecast and projections, • Keep updated with industry trends and developments, competitor's activities and future customer projects, • Maximize productivity by organizing resources to meet business demands and positioning the appropriate skill sets for maximum problem anticipation and resolution, • Participate and help Marketing Manager in planning and organization of marketing activities such as trade shows, seminars, marketing campaigns and industry associations, • Interact professionally with customers and suppliers, ability to resolve conflict while keeping relationships intact REQUIREMENTS • Bachelors Degree in an Engineering or Business Discipline is preferred, • 5+ years of Sales and/or Project Management experience with Industrial Automation Equipment / Capital Equipment or Machinery industry is REQUIRED, • 2+ years working knowledge of manufacturing type contracts in the Industrial Automation Equipment / Capital Equipment or Machinery industry is REQUIRED, • 2+ years working knowledge of Sales within the Industrial Automation Equipment / Capital Equipment or Machinery industry is REQUIRED, • Intermediate level of knowledge of industrial technical terms and principles, with the ability to read and interpret drawings (GD&T), • Experience using Microsoft Office - including Outlook, Excel (Intermediate level), Word (Advanced level), PowerPoint (Advanced level), • Experience with Microsoft Dynamics (Basic level) or other CRM system is required WORK ENVIRONMENT • Remote Position - Work from your home office, • Travel 70% to customer locations, trade shows, etc.

A fast-growing, family-owned food and beverage manufacturer in Northern New Jersey is adding an Industrial Automation Engineer to own daily troubleshooting and drive a major controls modernization program. The last person in this seat was just promoted to Engineering Manager after 2.5 years. That path is still wide open. ⠀ 𝗔𝗕𝗢𝗨𝗧 𝗧𝗛𝗘 𝗖𝗢𝗠𝗣𝗔𝗡𝗬 Pave Talent is hiring on behalf of our client, a privately held, family-owned food and beverage manufacturer in Totowa, NJ. Operating a world-class production facility, the company manages the full product lifecycle in-house for a wide portfolio of national brands. They've effectively doubled production capacity over the last three years and are now deploying their first robotic palletizer, pursuing vision inspection systems, and driving a plant-wide controls standardization initiative. They are at an inflection point, and this role sits at the center of it. ⠀ 𝗧𝗛𝗘 𝗢𝗣𝗣𝗢𝗥𝗧𝗨𝗡𝗜𝗧𝗬 You'll join a two-person engineering team and report into the Engineering Manager, who held this exact role before being promoted. You'll be the escalation point for the plant's maintenance team on complex automation issues, and you'll simultaneously execute capital projects that include a new roaster installation and a full retrofit of existing roasters with modern controls. This is a backfill for a role that produced an internal promotion. The growth trajectory is proven. ⠀ 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨'𝗟𝗟 𝗕𝗨𝗜𝗟𝗗 • Serve as the escalation point for the maintenance team on automation issues beyond standard scope: point-level sensors, VFDs, burner controllers, conveyors, and operator interfaces, • Execute controls and programming upgrades for production equipment, starting alongside the Engineering Manager on the first implementation and then owning subsequent retrofits and commissioning, • Rewrite and commission the automated transport system and its retrofit additions, • Support the installation of new production equipment arriving within the month, with more capital projects in the pipeline, • Standardize HMI development to ISA-101 and implement modular programming practices across the facility, • Integrate automation systems with the company's ERP platform (Plex), • Contribute to early-stage robotics and end-of-line automation initiatives, including a new robotic palletizer and vision inspection systems ⠀ 𝗪𝗛𝗔𝗧 𝗧𝗛𝗘𝗬'𝗥𝗘 𝗟𝗢𝗢𝗞𝗜𝗡𝗚 𝗙𝗢𝗥 (𝗔𝗡𝗗 𝗪𝗛𝗔𝗧 𝗧𝗵𝗲𝘆'𝗿𝗲 𝗡𝗼𝘁) This team wants someone who can speak to their work specifically. In interviews, they'll ask you to walk through a troubleshooting scenario or describe what a circuit is doing. Strong candidates engage with those questions directly and in detail. Candidates who speak only in generalities or lean on buzzwords without backing them up won't move forward. The plant runs a minimum of 16 hours a day, sometimes around the clock, seven days a week. You'll be part of an on-call rotation, and that occasionally means a weekend. There's no overtime pay, but time worked on weekends due to on-call or project needs is given back as schedule flexibility. If you want a role where you clock in, clock out, and never get a call, this isn't it. If you want ownership, visibility, and real technical growth, it is. ⠀ 𝗤𝗨𝗔𝗟𝗜𝗙𝗜𝗖𝗔𝗧𝗜𝗢𝗡𝗦 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗱: • PLC programming or troubleshooting experience (does not need to be from-scratch programming, but must be technically articulate about specific processes), • Electrical troubleshooting experience (ability to read and interpret circuits, identify faults, explain what a circuit is controlling), • 2+ years in a manufacturing, factory automation, system integration, or machine building environment, • Willingness to learn the production process from the ground up before taking on independent project ownership, • Availability for an on-call rotation in a 24/7 production environment 𝗕𝗼𝗻𝘂𝘀 𝗣𝗼𝗶𝗻𝘁𝘀: • Hands-on experience with Rockwell Studio 5000 Logix Designer, • Ignition Perspective HMI development, • FactoryTalk View SE/ME, • Familiarity with ISA-101 HMI standards or modular PLC programming practices, • Experience designing and building electrical control panels, • Bachelor's degree in Engineering or related field (preferred but not required; relevant experience accepted) ⠀ 𝗖𝗢𝗠𝗣𝗘𝗡𝗦𝗔𝗧𝗜𝗢𝗡 𝗔𝗡𝗗 𝗕𝗘𝗡𝗘𝗙𝗜𝗧𝗦 𝗕𝗮𝘀𝗲 𝗦𝗮𝗹𝗮𝗿𝘆: $90,000 to $100,000 | up to $110,000 for an exceptional candidate 𝗕𝗼𝗻𝘂𝘀: Performance-based; historically up to 15% end-of-year, with raises up to 10% for strong performers 𝗦𝗰𝗵𝗲𝗱𝘂𝗹𝗲: Flexible 40-hour work week; examples include 6:00 AM to 3:00 PM or 10:00 AM to 7:00 PM 𝗢𝗻-𝗖𝗮𝗹𝗹: Rotating on-call in a 24/7 operation; weekend coverage compensated with equivalent time off 𝗟𝗼𝗰𝗮𝘁𝗶𝗼𝗻: Fully on-site in Totowa, NJ (Northern NJ, near major transit corridors) 𝗥𝗲𝗹𝗼𝗰𝗮𝘁𝗶𝗼𝗻: Primarily targeting local candidates; open to relocation for an exceptional candidate on a case-by-case basis ⠀ Interested? Apply via LinkedIn and we'll be in touch. Confidential search; your application is fully private. 𝗣𝗮𝘃𝗲 𝗧𝗮𝗹𝗲𝗻𝘁 | 𝗛𝗶𝗿𝗶𝗻𝗴 𝗥𝗲𝗶𝗺𝗮𝗴𝗶𝗻𝗲𝗱

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced Quality Manager to establish and scale our Quality Management System (QMS). Your efforts will directly contribute to the organization's success by ensuring that the complex systems we build meet the highest standards of reliability and performance. This role requires a speed & execution mindset coupled with attention to detail.Key Responsibility Areas: • Develop, implement, and manage the company’s Quality Management System (QMS) compliant with relevant ISO standards, • Oversee supplier quality, incoming inspection and in process validation for critical hardware components, • Manage and develop company policies, programs, and procedures for non-conformance, corrective actions, and anomaly investigations, • Work with the Company’s leadership and technical teams to integrate quality checkpoints into the engineering design and manufacturing lifecycle, • Work with the technical teams to ensure proper quality measures are instituted for both hardware and software, • Lead internal audits and facilitate continuous improvement initiatives across cross-functional teamsIdeal Experience & Skillsets:, • 10+ years of relevant work experience in Quality Assurance / Quality Control within aerospace, automotive, or energy sectors, • Past leadership positions and experience managing and growing Quality organizations, • Deep knowledge of ISO 9001, AS9100, NQA-1 or other relevant quality standards, • OSHA 30hr Certification and a strong safety focus, • Excellent oral, written, and interpersonal communication skills, • Ability to work across cross-functional teams to support quality challenges, • Strong ethics and discretionCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionSenior Manager IT Quality Assurance Validation Computerization Systems Allendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices IT & Human Resources disciplines in New Jersey. The Senior Manager IT Quality will be responsible for supporting the Computerized System Project Teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. The incumbent will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contribute expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develop and evaluate quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • BA/BS Degree in a Scientific or Engineering discipline, • 8 + years experience computerized system experience with IT compliance/validation/qualification activities., • 8 + years experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise., • 10% travel required.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionSenior Manager IT Quality Assurance Validation Computerization Systems Allendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices IT & Human Resources disciplines in New Jersey. The Senior Manager IT Quality will be responsible for supporting the Computerized System Project Teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. The incumbent will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contribute expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develop and evaluate quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • BA/BS Degree in a Scientific or Engineering discipline, • 8 + years experience computerized system experience with IT compliance/validation/qualification activities., • 8 + years experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise., • 10% travel required.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description Source One is a consulting services company and we’re currently looking for the following individual to work as a consultant with our direct client, a energy and utility company in Newark, NJ. This is a Hybrid role see details below. This role will be onsite and available to candidates local to the Newark, NJ area. We are interested in every qualified candidate who is eligible to work in the United States. Unfortunately, we are not able to sponsor visas or employ corp-to-corp Business Development Manager - Energy Efficiency Program Support Manager Location: Hybrid – Newark, NJ - 1 day per week Supporting Clients in Central and South New Jersey 12 Month Contract Pay Rate: $60-$65/hr w2 Mileage Reimbursement Job Summary Oversee the performance of vendor(s), both office and field, that have been contracted to deliver program services Ensure vendor and employee compliance with safety protocols and practices Lead and participate in cross-functional teams, including other RES members, Customer Care, Contracting, Procurement, Legal, Marketing, IT etc, as required to deliver program services Enhance program delivery/customer experience and resolve business/customer issues Develop and maintain the processes for implementing energy efficiency projects and programs in accordance with requirements for BPU approved programs Provide oversight for business controls, process improvement and compliance Ensure accurate invoice processing Identify and implement process improvements and automate where possible Monitor program Key Performance Indicators to ensure program delivery meets business plan expectations Prepare and present program and project status reports to senior management Assist with special projects as necessary This leader must foster an inclusive work environment and respect all aspects of diversity. Must demonstrate and value differences in others' strengths, perspectives, approaches, and personal choices During storm restoration efforts, may be required to perform functions outside of routine duties and on a schedule that may be different from normal operation Job Responsibilities Oversee the performance of vendor(s), both office and field, that have been contracted to deliver program services; manage employee performance; ensure safety protocols and practices are followed. Lead and participate in cross-functional teams, including other RES members, Customer Care, Contracting, Procurement, Legal, Marketing, IT etc, as required to deliver program services, enhance program delivery/customer experience and resolve business issues. Develop and maintain program processes. Provide oversight for business controls, process improvement and compliance. Ensure accurate invoice processing. Identify and implement process improvements and automate where possible. Monitor program Key Performance Indicators to ensure program delivery meets business plan expectations and regulatory requirements; Prepare and present program and project status reports to senior management. Required: B.S. Degree in Management, Engineering, Business, Finance or other relevant field or equivalent work experience plus 7 years of experience in the space of energy efficiency programs, construction, or related fields. In lieu of a degree, 11 years of experience in the space of energy efficiency programs, construction, or related field. Experience managing vendor performance, and leading cross-functional teams; Energy Efficiency or Electric Vehicle program experience Management/leadership experience working with cross-functional teams Valid US driver's license Desired: Certified Energy Manager (CEM) certification MBA or Advanced Degree Company DescriptionA WBENC (woman owned) certified company; Source One provides a full range of professionals to the Pharmaceutical & Healthcare, Defense, Technology, Financial Services, Retail & Manufacturing, and Energy & Transportation industries nationwide.A WBENC (woman owned) certified company; Source One provides a full range of professionals to the Pharmaceutical & Healthcare, Defense, Technology, Financial Services, Retail & Manufacturing, and Energy & Transportation industries nationwide.

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer, a company that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include but are not limited to the security of supply, cost savings, optimization of processes, and supplier risk mitigation. The overall goal is to support production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of company EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Directly responsible for the overall Plant procurement operations which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives. BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality. Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: Representation/employer clarification: This search is being conducted by Augmentis on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring.

Job DescriptionRole Overview: The Safety Specialist (EHS Specialist) is responsible for leading and managing company-wide Environmental, Health, and Safety (EHS) programs within a manufacturing and production environment. This role ensures the organization maintains a safe, compliant, and high-performing workplace by implementing proactive safety strategies and maintaining full compliance with OSHA, DOT, and applicable regulatory standards. Working closely with Operations, Engineering, and Human Resources, the Safety Specialist plays a critical plant-facing role, supporting daily manufacturing operations while driving long-term safety improvements, risk reduction initiatives, and a strong safety-first culture across the organization. This position has the potential to become a manager role. Job Requirements: • Bachelor's degree required; focus in Occupational Safety, Environmental Health, Engineering, or related field preferred., • 3–5 years of experience as an EHS Specialist in a manufacturing, production, or industrial environment., • Strong working knowledge of OSHA regulations, workplace safety compliance, and DOT standards., • Experience developing and implementing EHS programs within manufacturing or plant environments., • Experience delivering or coordinating safety training programs, including forklift operation, crane safety, and first aid/CPR., • Proven experience conducting safety audits, risk assessments, and incident investigations., • Familiarity with workers' compensation programs, injury prevention, and corrective action processes., • Ability to travel occasionally to company locations as needed., • Proficiency in Microsoft Office and safety management software systems., • Strong analytical, communication, and leadership skills with the ability to influence safety culture across operations teams.Key Responsibilities:, • Develop Safety Programs: Create, implement, and manage comprehensive safety policies and procedures covering employee, equipment, and material safety., • Ensure OSHA Compliance: Serve as the company's internal expert on OSHA regulations, DOT standards, and industry safety compliance, ensuring policies and procedures meet regulatory requirements., • Drive Safety Culture: Partner with Operations and leadership to promote a proactive safety culture across all production and warehouse operations., • Deliver Safety Training: Develop and conduct employee safety training programs, including equipment safety, hazard awareness, and emergency response., • Conduct Plant Inspections: Perform routine safety inspections and compliance audits across manufacturing, production, and warehouse environments., • Lead Incident Investigations: Investigate workplace accidents, incidents, and near-misses, identifying root causes and implementing corrective actions., • Support Workers' Compensation: Monitor and support workers' compensation cases, implementing prevention strategies to reduce workplace injuries., • Manage Fleet Safety: Evaluate company fleet safety performance and ensure compliance with transportation safety requirements., • Report Safety Performance: Prepare and present safety metrics, compliance reports, and risk assessments to leadership., • Maintain Safety Documentation: Manage SDS files, safety logs, training records, and compliance documentation to ensure audit readiness.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description About the Role Do you enjoy building strong customer relationships while leading a high-performing sales team? Do you thrive on driving growth through disciplined execution and strategic account expansion? We’re seeking a Sales Manager who combines technical understanding with relationship leadership. This role is responsible for growing revenue, strengthening customer partnerships, and driving accountability across the sales function. You will lead a team of technical sales professionals while actively engaging in key accounts and new business development. Success in this role requires strong communication skills, structured sales management, and the ability to motivate and develop others. What You’ll Do · Lead, coach, and develop a results-driven sales team. · Drive growth by expanding existing accounts and securing new opportunities. · Build long-term partnerships with engineers, plant managers, and executive decision-makers. · Establish clear performance metrics and maintain CRM discipline. · Create and execute account growth strategies. · Collaborate with engineering and operations to ensure smooth project execution. · Monitor pipeline health, forecasting accuracy, and team accountability. · Travel to customer sites (~25–35%). What We’re Looking For · A proven sales leader who builds trust and accountability. · Relationship-driven with strong communication skills. · Comfortable setting expectations and driving measurable performance. · Experience managing technical or industrial sales teams. · Strong understanding of capital equipment, converting machinery, or industrial systems. · Ability to balance big-picture strategy with structured execution. · Bachelor’s degree in Mechanical, Industrial, Engineering, or Business preferred. · 7+ years of industrial or capital equipment sales experience. · Demonstrated success meeting or exceeding revenue targets. This Role Is Not a Fit For · Candidates without experience in industrial, manufacturing, or capital equipment environments. · Inside-only sales backgrounds without field leadership. · Professionals who prefer independent selling without team accountability. · Candidates seeking a purely administrative management role. Compensation & Benefits · Competitive base salary + performance bonus. · Medical, dental, and life insurance. · 401(k) with profit sharing. · Paid time off and holidays. · Travel expense reimbursement. · Collaborative, growth-focused culture. Why Join AZCO? AZCO has more than 40 years of experience designing and delivering feeding, cutting, and dispensing solutions for industrial manufacturers. We are known for practical, field-proven systems and long-term customer relationships built on trust and technical credibility. This is an opportunity to lead a technically strong team and elevate our next stage of growth. Company DescriptionAZCO Corp has over 40 years of experience developing solutions for a wide range of feeding, cutting, and dispensing applications. It offers cutting-edge, field-proven systems and components.AZCO Corp has over 40 years of experience developing solutions for a wide range of feeding, cutting, and dispensing applications. It offers cutting-edge, field-proven systems and components.

Job DescriptionAssociate Director, Manufacturing OperationsAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Associate Director, Manufacturing Operations is responsible for efficient utilization of Operations resources to meet customer demand. This role will be responsible for maintaining and overseeing the site Operations scheduling and training capacities for a time period looking ahead to the next 3-6 months. The Associate Director, Manufacturing Operations will understand upcoming needs and constraints and help drive strategy accordingly. This includes the management of all Operations scheduling, training and compliance resources. The Associate Director, Manufacturing Operations is also responsible for assessing the needs of the company to contribute to the big picture by ensuring daily operations run smoothly and as efficiently as possible. This role will also drive individual and team development to ensure a prepared and empowered workforce to become the provider of choice for the industry. • Meeting client process demands through planning, scheduling, manufacture and delivery of clinical cell therapy products according to established procedures, regulations and contracts, • Looking out 3-6 months to ensure capacity and availability of resources (room/equipment/staff) to perform clinical manufacture for processing needs, • Manages all training and compliance activities in the Operations organization, • Responsible for creating, enforcing and measuring Operator training schedules in order to ensure that all production schedules can be carried out, • Creates and maintains a process to ensure that personnel schedules are being accurately and fairly assigned to all Associates, • Supporting and driving special long-term projects and identified and assigned by the PPU Head, • Responsible for creating maintaining and communicating all Operations based KPI’s, • Ensuring department staff compliance with corporate and site-specific HR policies, safety, and business policies and practices, • Approving job specific curriculum for the training and professional development of department staff, • Responsible for streamlining the batch record review process, • Responsible to understand the profit and loss for the PPU’s as well as all related documentation, and how these items impact Operations, • Driving continuous improvement, • Liaison with support groups for short- and medium-term needs – Supply Chain, Training, Quality Systems, Quality Assurance, Quality Control, and others, • Set team expectations and goals and assists in delivering the business direction for the PPU, • Aligning departmental goals, processes and resource allocation with the organizational strategy, • Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws., • Direct reports: Associate Manager Training, Associate Manager, Compliance, Scheduling Associate, Quality Engineer Associates. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. REQUIREMENTS, • Bachelor's degree (i.e. Biology, Biotechnology, Bioengineering, Chemical Engineering)., • 5-10 years of cGMP environment, aseptic processing, mammalian cell culture, monoclonal antibody, cell processing, cryopreservation or similar experience., • 5-10 years of leadership experience or equivalent combination of experience., • Deep Understanding of cGMP and cGLP, • Working knowledge of financial operations and budget development, • Relevant IT skills (able to work with Microsoft Office and corporate scheduling system), • Competencies/Candidate Profile, • Strong collaborative and influencing skills and ability to work well in a cross-functional, matrixed environment, • Flexible and able to adapt to company growth and evolving responsibilities, • Accountability, integrity, and strong dedication to regulatory compliance, • Strong business and personnel management acumen, • Strong emotional intelligence, • Ability to think strategically and tactically (detail-oriented), • Strong analytical and problem-solving skills, • Strong written and verbal communication skills, • Drive to create and maintain order in a fluid, technically complex environment, • Continuous improvement mindset, • Ability to multi-task is essential, • Must have the ability to work in a team-oriented environment and with clients, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Environment requires gowning, hair net, safety glasses, gloves, and foot coverings.Must be capable of moving, sitting, stretching, stooping, using hands and fingers, reaching with hands and arms, talking and exchanging information, and vision sufficient to read materials.Duties, responsibilities, and activities may change at any time with or without notice

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description • Visit cement plants, building strong relationship with the cement market., • Regular communication with Company’s Director of Cement Additives and Company’s Technical Service., • Follow closely on-site field trials., • Jointly work with commercial/technical team to understand the customer requirement, and making adjustment of products to support existing business and capture new market opportunities to grow the business., • Jointly work with commercial team to gather market intelligence to better understand industry trend and competitors. Working with Product Management to develop new product to grow and improve profitability of the business., • Develop and regularly update competitors’ product database to support commercial growth., • Develop, implement, and manage customer complaint process to make sure all complaints are well taken care, timely response to customers, and high degree of customer satisfaction is achieved., • Provide value added service to customer – seminar, technical presentation, on site troubleshooting., • Serve as the technical expert to SIKA’s customers by troubleshooting technical issues at the Cement Plant, demonstrating Sika’s product capabilities, recommending solutions and serving as Sika’s representative in technical proposals to the customers. Provide first level of field troubleshooting to customers., • Promote safety working environment and commit to achieve zero accident target., • Report to Direct Manager on activity, market, competition, key projects, trials.Qualifications, • Diploma / University degree in engineering (preferably chemical engineer), • 3-5 years hands-on field experience in Cement Industry, • Strong relevant industry and segment knowledge & network, • Strong technical aptitude and willingness to learn and apply knowledge, • A self-starter, excellent time and self-management, require minimum supervision, • Ability to work independently and willing to travel on a frequent basis, • Excellent customer relationship management skill, • Ability to influence and lead multi function to achieve goals, • Good communication and team player Additional Information · 401k with Generous Company Match · Bonuses · Medical, Dental, and Vision Benefits · Paid Parental Leave · Life Insurance · Disability Insurance · Paid time off, paid holidays · Floating holidays + Paid Volunteer Time · Wellness/Fitness Reimbursements · Education Assistance · Professional Development Opportunities · Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description For those who’d rather be on the move than behind a desk. We’re opening our 2026 hiring pipeline now for curious, adaptable problem-solvers who love travel, hands-on work, and being part of a team that actually knows your name. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit. We believe in transparency. Our four-week paid training is designed to prepare technically skilled individuals for the field. Success in training requires a basic foundation in electrical systems, programming, and communication networking. If you’re new to these areas, this role may not yet be the right fit. Why You’ll Love Working With Us Work + Travel, Combined. You’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. There is no office to report to, and you’ll be away from home while you’re working. Fair Pay That Grows With You. Starting salary $60,000–$75,000, depending on location, education, and experience. You’ll also receive per diem for meals, mileage reimbursement, utilization bonuses, weekend bonuses and more. We don’t have endless budgets, but we do have trust, teamwork, and appreciation of knowing every person by name. Room to Grow. We invest in your development through paid training, annual merit raises, and a 5% salary increase after six months. Learn, advance, and build a career that can take you in multiple directions. We will be your biggest cheerleaders of growth, even if you’re not with ProAutomated forever. Real Benefits + Real Flexibility. Health, dental, and life insurance, a matching 401(k), short & long term disability options, paid vacation, and flexible time off after 18 months. We take care of you, on and off the job. A Team That Gives You Community. We’re a smaller, people-first company where teamwork, adaptability, and humor are part of the job. All of our leaders have grown into their positions at ProAutomated, so your manager has done what they’re asking you to do. We hold each other to high standards, accept none of us are perfect, and push for excellence. You’ll be surrounded by people who have your back. What You’ll Do You’ll be part of the team that keeps automation projects moving. At ProAutomated, we don’t install systems, we partner with system integrators and manufacturers to ensure everything works flawlessly when it matters most. • Support data center startups, performing on-site mechanical, electrical, and control checks., • Lead startup, checkout, and acceptance testing for warehouse fulfillment and manufacturing systems in industries like food and beverage., • Partner with automation and controls engineers to test, troubleshoot, and validate their systems on-site., • Provide clear communication and updates to customers and project teams to keep progress smooth and accurate., • Typical travel rotations follow a days on & off schedule: 5 on - 2 off, 10 on – 4 off, or 14 on – 7 off. Every project brings new challenges and new locations., • Work with various customers, getting invaluable real world experience with massive companies, but with the ProAutomated team supporting you.What We’re Looking For, • A genuine love of travel, expect to be away from home on rotation (we’ll handle the logistics)., • Preferred experience: have a working knowledge of electrical systems, programming, and communication networking skills., • Adaptability and grit, you thrive when plans change and challenges pop up., • Strong communication and problem-solving skills., • Must live within 50 miles of a major airport (relocation assistance available)., • Personal vehicle within 45 days of employment (for local projects)., • Authorized to work in the U.S., • A technical degree or equivalent hands-on experience (3+ years) in a related field such as electrical, mechanical, or automation engineering. Physical Requirements The below physical requirements are considered essential functions of the role. • Ability to walk long distances across large facilities or job sites as part of daily work activities., • Climb ladders, stairs, or work at heights., • Lift, carry, and move up to 50 lbs., • Stand, kneel, or reach for extended periods Apply now to get on our radar for early 2026 hiring. Principals only — recruiters, please do not contact. ProAutomated is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment where all team members feel respected and supported. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other protected status. Powered by JazzHR XpWVsjOeu8

Job DescriptionSalary: $165,000-$185,000 Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Companys broad product portfolio, born as MamaMancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit . We have an excellent opportunity for a highly skilled and experienced leader to serve as the Senior Director, Plant Operations of our East Rutherford facility. You will be the senior site leader responsible for the overall performance, safety, Grandma Quality, controls, culture, and financial results of the manufacturing facility. This role serves as the plants general manager, accountable for translating enterprise strategy into consistent, disciplined execution with excellence at the site level. The Senior Director leads through people, systems, and standards, ensuring production, FSQA, maintenance, warehousing, and workforce leadership operate in alignment with Grandma Quality. This role balances results with responsibility, honoring Mamas heritage while building scalable, sustainable operations. Key Responsibilities • Own end-to-end plant performance, including safety, food safety, quality, service, cost, labor efficiency, and employee engagement., • Own overall plant efficiency and throughput performance, ensuring production capacity, labor models, and operating practices support enterprise targets., • Drive improvement in throughput, yield, and line performance by setting expectations, removing barriers, and holding leaders accountable for results., • Serve as the strategic leader for the site, translating enterprise priorities into clear site-level strategies, initiatives, and execution plans., • Partner with the Senior Manager, Production Operations to ensure production schedules and execution plans support optimal efficiency and service outcomes., • Own the plant operating budget, including labor, overtime, supplies, and controllable costs; ensure performance aligns with financial targets., • Balance cost discipline with Mamas commitment to Grandma Quality, safety, and employee well-being., • Use KPIs and financial data to evaluate performance, prioritize investments, and guide decision-making., • Partner with OpEx/CI to identify and sponsor continuous improvement initiatives that deliver measurable, sustainable gains in efficiency, throughput, and cost performance., • Ensure efficiency gains and cost improvements are sustainable and embedded into standard work and leadership routines., • Lead, coach, and hold accountable all direct reports, site functional leaders, and the downline., • Serve as the primary owner of plant culture, reinforcing values-based leadership, respectful supervision, and consistent accountability., • Ensure site execution aligns with enterprise standards of excellence and Grandma Quality while addressing location-specific risks and opportunities., • Partner with FSQA leadership to maintain strong food safety culture, regulatory compliance, and audit readiness., • Own site-level labor strategy, workforce planning, and performance management in partnership with People Operations., • Drive operational discipline through KPIs, operating practices, and structured problem-solving., • Partner with Reliability & Asset Management to support uptime, preventive maintenance execution, and capital improvements., • Support capital projects, expansions, and equipment installations at the site level., • Participate in operational diligence and integration activities related to acquisitions or expansions impacting the facility., • Serve as the primary escalation point for site risks, performance gaps, and employee relations matters., • Build strong cross-functional relationships that nurture trust, accountability, and pride in workmanship., • Collaborate closely with Senior Directors and plant leaders at other facilities to share best practices, standardize where appropriate, and drive enterprise-wide operational improvement., • Participate in cross-facility working groups, initiatives, and problem-solving efforts to strengthen consistency, performance, and scalability across the enterprise., • Champion collaboration between facilities while respecting site-specific strengths, constraints, and heritage., • Other related tasks, as necessary to drive results and support the business. Qualifications • Bachelors degree in Operations Management, Engineering, Business, or related field; or equivalent experience., • 15+ years of progressive leadership experience in manufacturing operations, preferably in food manufacturing or regulated environments., • 10+ years of experience leading multi-shift operations and managing leaders (managers/supervisors)., • Demonstrated experience owning site KPIs, budgets, labor planning, and operational performance improvement., • Expert usage of ERP systems. NetSuite preferred., • Strong working knowledge of food safety/regulatory environments (USDA/FDA), HACCP, GMPs, and audit readiness expectations., • Proven ability to lead through change while maintaining operational stability and culture., • Strong communication, planning, and cross-functional leadership skills., • Lean/Six Sigma knowledge/certification, preferred., • Bilingual (English/Spanish) highly preferred. Essential Physical Requirements • Ability to regularly walk, stand, and move throughout the manufacturing facility., • Ability to navigate stairs, catwalks, and uneven surfaces safely., • Ability to visually and audibly observe operations and employee practices., • Ability to wear required PPE (hair/beard nets, safety shoes, gloves, safety glasses, hearing protection)., • Ability to work in varying environmental conditions (heat, cold, noise, humidity)., • Ability to sit for extended periods while performing administrative work., • Ability to travel locally as required., • Ability to communicate clearly and effectively. We offer a comprehensive compensation package that includes a base salary (to $185k,) plus bonus eligibility, paid time off, holiday pay, medical, dental, vision, and life insurances, FSA, EAP, and 401(k.)

Job Description Job Summary: The focus of this position is upon manufacturing support, quality planning, problem solving, training, quality system maintenance, continuous improvement. Provides Quality Engineering coordination of quality planning activities that ensure products and processes are designed, validated, procured, manufactured and inspected in accordance with customer and company quality assurance requirements. This role requires work in our Fairfield and Byram locations. Primary Responsibilities: • Maintains and improves Quality systems such as Calibration, Document Control, Non-conformance, Corrective Action, Management Review, Audits, Material Return, Material Review Board, etc., • Uses ability to interpret and analyze blueprints to develop and facilitate the creation of Product Quality Plans, Process Failure Mode and Effects Analysis, Control Plans and Inspection Instructions. Develops and initiates standards and methods for inspection, and evaluation of products and processes. Collects data tied to appropriate statistical techniques and sampling plan., • Develops and implements means for the use and reporting of statistical and capability studies in the manufacturing process., • Maintains, coordinates activities and systems, and makes improvements to quality systems such as Non-Conformance, Material Returns, Gage and Tooling Calibration, etc., • Assist in performing failure analysis for products and processes using problem solving tools and techniques. Troubleshoots processes to improve and correct quality issues., • Supports Quality Manager in various activities including cross-functional teams in formal and informal continuous improvement activities (i.e. developing and improving baseline Cpks, reducing scrap and rework, improving first time yields, reducing costs). Prepares reports, graphs and charts (level I-III) to describe trends, pin point areas of focus for improvement opportunities, or to provide information, • Maintains a thorough knowledge of all manufacturing and quality assurance systems i.e. Lot Acceptance, Military Specs, Design Qualification Testing, and quality assurance systems, i.e. First Article Inspection, Calibration of inspection equipment, inspection methods, techniques and gages, etc and, • Documents non-conformances and conducts preliminary reviews. Conducts preliminary review and analyzes non-conformance data to identify opportunities for corrective, preventive or continuous improvement opportunities., • Writes, revises and releases technical procedures and work instructions as necessary. Identifies opportunities for improvement and recommends changes to system documents., • Performs and hosts audits of quality systems, products, and processes, internal and external (suppliers/subsidiaries)., • Adheres to safety practices and procedures and follows overall CAD procedures & policies, procedures tied to ISO 9001/AS9100 and other QMS requirements., • Adheres to the Controlled Unclassified Information (CUI) policies and procedures related to NIST 800-171 and completes all required CUI Awareness training, which includes collection, processing/handling, transmission, storage, and general safeguarding practices., • Maintains the confidentiality of all information processed. Performs related duties as assigned. Regular and consistent attendance is required. While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop and perform work behind a safety shield. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. Work environment: While performing the duties of this job, the employee maybe at times be exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Safety apparatus/ measuring devices are required to be used when performing tasks involving both X-Ray and Leak Tester. Work is performed in a temperature-controlled environment. The noise level in the environment is usually low to moderate. Essential Skills: Subject Matter Understanding. Analytical. Computer Applications. Project Management. Critical Thinking. Problem Solving. Attention to details. Use of basic inspection measuring equipment/test equipment, (i.e.) power supplies, oscilloscope, ohmmeter. Job Qualifications: Required: Bachelor's degree in an Engineering, or Technical field of study. All candidates are required to have excellent verbal and written communication skills; strong organizational and interpersonal skills; attention to detail, imitative and ability to prioritize multiple projects; experience in team facilitation and problem solving, knowledge of Root Cause Analysis, Failure Modes, and Effect Analysis, Quality Reporting and Analysis, Flowcharting and Procedure Analysis; knowledge of in Capability Analysis, process control of product, developing controls plans and statistical techniques . Preferred: Working knowledge of ISO 9001, AS9100, and / or similar quality system standards and Microsoft Office. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job DescriptionJob Title: Industrial Mechanical Technician – Class A Department: Engineering Reports To: Maintenance Manager / Chief Engineer Location: Strike Force Staffing – Clifton, NY Employment Type: Full-Time Availability: Open Availability Required Number of Openings: 1 Work Environment: Exposure to extreme temperatures (hot/cold); food handling environment Job Summary:Manufacturing Plant in Clifton, NY is seeking a Class A Industrial Mechanical Technician to join their dynamic maintenance team. This position plays a key role in keeping our high-speed food production facility running efficiently by performing preventive maintenance, troubleshooting, and repairs on electrical, mechanical, pneumatic, and hydraulic systems.The ideal candidate has hands-on experience in a manufacturing setting, especially in food or beverage production, and is proactive in identifying equipment issues and recommending improvements that support safety, efficiency, and product quality. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • 401(k) Retirement Plan, • Medical, Dental, and Vision Insurance, • Paid Time Off (PTO)

Job DescriptionRole Overview: The Maintenance Manager is responsible for overseeing all maintenance operations across the facility, ensuring equipment reliability, minimizing downtime, and supporting continuous production. This role leads maintenance teams, manages preventive maintenance programs, and drives improvements in equipment performance and operational efficiency. This position requires a hands-on leader with strong experience in manufacturing maintenance, troubleshooting, and team management, and the ability to support a dynamic production environment. Job Requirements: • 7+ years of experience in maintenance within a manufacturing environment., • 3+ years of experience in a leadership or supervisory role., • Strong background in mechanical, electrical, and industrial equipment maintenance., • Experience managing preventive and predictive maintenance programs., • Knowledge of production equipment, conveyors, motors, pumps, and automation systems., • Experience in troubleshooting electrical and mechanical systems., • Familiarity with OSHA regulations and safety compliance standards., • Experience leading and developing maintenance teams and technicians., • Ability to manage multiple priorities in a fast-paced environment., • Strong organizational and problem-solving skills., • Experience with CMMS systems and maintenance tracking tools preferred., • High school diploma required; technical degree or engineering background preferred.Personal Attributes / Skills:, • Strong leadership and team management skills., • Hands-on, solution-oriented mindset., • High attention to detail with a focus on safety and efficiency., • Effective communicators across operations, production, and leadership teams., • Proactive and adaptable in a fast-paced manufacturing environment.Physical Requirements:, • Ability to walk the production floor and oversee maintenance operations regularly., • Comfortable working around industrial equipment and manufacturing processes., • Ability to respond to maintenance issues and emergencies as needed.Key Responsibilities:, • Lead Maintenance Operations: Oversee all maintenance activities to ensure equipment uptime and operational efficiency., • Manage Maintenance Team: Supervise, train, and develop maintenance staff, setting performance expectations., • Preventive Maintenance Programs: Implement and manage preventive and predictive maintenance strategies., • Troubleshoot Equipment Issues: Support resolution of mechanical and electrical failures to minimize downtime., • Improve Equipment Reliability: Identify and implement improvements to increase equipment performance and lifespan., • Ensure Safety Compliance: Maintain compliance with OSHA standards and company safety policies., • Coordinate Projects: Manage equipment installations, upgrades, and facility improvement projects., • Track Maintenance Metrics: Monitor KPIs such as downtime, response time, and equipment performance., • Manage Inventory & Parts: Oversee spare parts inventory and maintenance-related purchasing., • Cross-Functional Collaboration: Work closely with production, engineering, and operations teams., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Systems Engineering who will be responsible for the systems engineering of the company’s integrated fusion systems and prototypes. In this role, you will lead an interdisciplinary team to integrate first-of-a-kind technologies into a scalable fusion power plant architecture. You will also be responsible for ensuring that all applicable Company engineering disciplines are integrated across workflows, requirements, interfaces, and standards. You will lead, mentor, and develop a high-performing team of systems engineers, and foster a collaborative and innovative work environment capable of solving the complexities of fusion energy. The ideal candidate is a high-autonomy leader who can move quickly to scale a leading team and implement the rigorous systems engineering frameworks required to commercialize fusion energy at scale. You will serve as a mentor, a strategist, and the primary advocate for systems-level thinking across the entire organization. Key Responsibility Areas: • Manage technical baselines including requirements, interfaces, configurations, KPIs, data management, standards, protocols & procedures, and verification & validation processes., • Establish and manage processes and tools across the product development and operational lifecycle., • Efficiently and systematically convert functional requirements into a scalable system architecture and execution strategy., • Ensure seamless integration between the physics, engineering, manufacturing, construction, and test/ops teams., • Work with leadership and program management to develop and manage protocols for making and tracking key decisions and change control management, ensuring transparency and accountability across the company., • Ensure the efficient and systematic conversion of functional requirements into a scalable system architecture and execution strategy., • Own architecture PBS and WBS., • Build a high-performance systems engineering team. Identify skill gaps and strategically grow the department to meet program milestones., • Actively coach and mentor junior and senior engineers. Create professional growth plans and foster a culture of technical excellence and collaboration., • Develop the internal framework for the systems engineering group, defining roles, responsibilities, and ensure maximum efficiency and transparency across the organization., • Set clear KPIs for the team, conduct regular performance reviews, and manage resource allocation across various technical workstreams., • Promote a collaborative, "fail fast, learn faster" environment while maintaining a relentless focus on safety and rigorous engineering standards., • Coordinate with suppliers, vendors, and internal manufacturing engineering teams., • Coordinate design reviews and program management functions.Ideal Experience & Skillsets:, • First-of-a-Kind (FOAK) Experience: Proven experience integrating large-scale, complex R&D projects (e.g., aerospace, particle accelerators, nuclear, or advanced manufacturing)., • Technical Breadth: Deep familiarity with mechanical, electrical, fluid, and control systems. Experience with Siemens NX or similar PLM/CAD tools is essential., • Proven Management Track Record: 8+ years of engineering experience, including 3+ years in a formal people-leadership role (lead, manager, director, or VP)., • Strategic Mindset: Can see the "big picture" of the fusion pilot plant while ensuring the team executes on the smallest interface details., • Adaptability: Thrives in a fast-paced, "many hats" startup environment where priorities can shift rapidly., • Collaboration: A team player who views the success of the physics and manufacturing teams as their own success., • Communication Excellence: Ability to translate complex technical trade-offs into actionable insights for executive leadership and non-technical stakeholders., • Interpersonal Skills: A "servant leader" mindset with a track record of helping others succeed and navigating complex team dynamics., • Safety Mindset: Prioritization of safety and reliability in high-energy or hazardous environments., • Education: Bachelor’s degree or greater in a relevant engineering field., • Occasional travel and the ability to lift up to 50 lbs in a lab/industrial setting.LI-RD1Company Benefits:, • Salary range $135,000-$250,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced, highly motivated Facilities Manager to oversee the physical infrastructure required to build the future of fusion energy. This candidate will interact with the Company’s leadership, finance & operations, and technical teams to ensure our labs, production floor, and offices are safe, efficient, and scalable. This role will have a high degree of autonomy, and the ideal candidate must be able to move quickly to support our rapid growth.Key Responsibility Areas: • Manage day-to-day facility operations including building maintenance, HVAC, electrical, and plumbing systems for both office and high-tech lab environments, • Ensure all equipment is maintained, with preventative maintenance plans in place for all critical assets, • Plan and execute facility modifications and expansions to support hiring and installation of manufacturing and test equipment, • Manage vendor relationships, service contracts, and facility budgets, • Develop expansion plans to account for company growth, working with real estate brokers and negotiating leases for additional space, • Coordinate with other organization stakeholders to ensure compliance with all local, state, and federal building codes and safety regulations, • Manage and develop company policies, programs, and procedures regarding space planning and asset management, • Lead space allocation planning for a growing teamIdeal Experience & Skillsets:, • 7+ years of relevant work experience in facilities management, preferably in an R&D, or manufacturing environment., • Experience managing complex electrical infrastructure and laboratory / manufacturing build-outs., • Experience with high vacuum systems, • Proven organizational skills with the ability to manage multiple projects and priorities, • OSHA 30hr Certification and a strong safety focus, • Ability to thrive in a fast-paced, dynamic startup environment., • Ability to find creative solutions to physical infrastructure problems., • Excellent negotiation, communication, and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionSr. Manager Quality Assurance Validation Computerization Systems The incumbent will be responsible for supporting the Computerized System project teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. Will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contributes expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develops and evaluates quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • Bachelor’s Degree in a Scientific or Engineering discipline, • 8 + years of computerized system experience with IT compliance/validation/qualification activities., • 8 + years of experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • 10% travel required., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job Summary The Manufacturing Engineer is responsible for providing improvement solutions for the facility's production tooling, equipment, and procedures to ensure efficient operations. This hands-on position requires spending the majority of time on the manufacturing floor and must be able to take projects from conception to completion. Primary Job Responsibilities • Programming for all production processing needs., • Preparing jobs to be released for production. Familiarity with Amada VPSS BLANK 4ie software is a plus., • Creates product assembly work instructions and manufacturing equipment processing instructions., • Maintains a program database and detailed records on all CNC machines (Amada Turret Punch, Laser, Punch/Laser Combo)., • Uses engineering drawings to program machinery for engineered items., • Troubleshoots problems with failed products, products, or systems., • Participates in the resolution of quality issues and drive associated improvements., • Identifies and plans manufacturing assembly and test workflow layout., • Works with Quality Manager to ensure and maintain compliance with safety, operational, and regulatory standards of Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety Association (OHSA)., • Continuously assesses opportunities for improvement and any needed changes to management systems., • Evaluate manufacturing processes by designing and conducting research programs., • Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors., • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout., • Ensures product and process quality by designing testing methods., • Provides manufacturing decision-making information by calculating production, labor, and material costs., • Provides manufacturing engineering information by answering questions and requests., • Maintains product and process database by writing computer programs and entering data., • Completes design and development projects by training and guiding technicians., • Bachelor’s degree in Mechanical or Manufacturing Engineering, or 5 to 10 years of manufacturing experience in a related field., • 3 to 5 years of Solidworks or Inventor experience as well as:, • CAD and 2D drafting experience., • Machine Code experience., • CNC and Automation experience (Amada AP100US or similar software)., • ISO 9001 experience with process documentation and system audits. Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job DescriptionSummary The Drafting Manager will work alongside The President and Project Managers to help Prepare Clear and Concise Shop Drawings from The Drafters for The Field Installers. The Drafting Manager will Oversee, Manage, Train The Drafters in Participating in Weekly Coordination Meetings, Updating Shop Drawings, Send RFI’s for any Clarifications needed from Drawings. The Drafter Manger will be Responsible Confirming The Drafters are Preparing Technical Drawings with Dimensions to be used on Construction Sites. Essential Functions • Prepare Shop Drawings using Computer Aided Design (CAD) Software to Produce Detailed 2D/3D Drawings, Floor Plans, Elevations, and Cross-Sections., • Work from Rough Sketches or Specifications Created by Engineers and Architects to understand Project Requirements., • Add Detail to Architectural and Mechanical Plans for Proper Installation., • Specify Dimensions, Materials, and Procedures for New Products., • Ensure all Drawings meet Industry Standards, Building Codes, and Project-Specific Guidelines., • Work Closely with President and Project Managers for Accurate Drawings., • Bachelor’s degree or Diploma in Drafting, Architecture, Engineering or a related field., • 3-5 years of Demonstrable Experience as a Drafter., • Proficiency in Computer-Aided Design (CAD) software (e.g., AutoCAD, SolidWorks, or similar) and the Ability to Produce High-Quality Drawings., • Strong Attention to Detail and Precision in Drafting, Ensuring that all Dimensions and Specifications are Accurate., • Familiarity with Construction and Manufacturing Processes with an Understanding of design Standards., • Effective Communication and Collaboration Skills., • Strong Problem-Solving Skills and the Ability to Find Practical Solutions to Design Challenges., • Additional Certification from the American Design Drafting Association (ADDA) is a Plus. Position Type and Expected Hours of Work The days and hours of work are Monday through Friday: 7:00 am – 5:00 pm. Powered by JazzHR DCDI3D8vYG

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Role Summary: The Fiber Product Manager is responsible for the strategy, development, commercialization, and lifecycle management of fiber reinforcement products used in concrete and cementitious systems. This role serves as the technical and commercial bridge between R&D, manufacturing, sales, marketing, and customers, ensuring fiber solutions meet performance, regulatory, and market needs across North America. Key Responsibilities Product Strategy & Portfolio Management • Develop and own the product roadmap for synthetic, steel, and/or specialty fiber reinforcement solutions., • Identify market needs, competitive gaps, and growth opportunities for fibers., • Define value propositions, target segments, and positioning for fiber products., • Manage product lifecycle from concept through launch, optimization, & end-of-life., • Translate concrete and FRC performance requirements (shrinkage, crack control, residual strength, toughness, impact resistance, durability, etc.) into defined product and design criteria., • Engineering support for all FRC design & Slab Solutions (sales & customer support), • Provide technical direction to R&D on fiber design, performance testing, and innovation aligned with ACI and ASTM guidance., • Lead the technical content for product launches, including data sheets, engineering design guides, mixing and dosing of fibers, and specification language., • Develop technical tools and design approaches supporting fiber reinforcement and fiber substitution per accepted FRC methodologies., • Support application engineering, including fiber dosage calculations, mix design guidance, and specification support., • Serve as the technical escalation point for complex design, application, and field performance issues., • Lead new product launches, including pricing strategy, technical documentation, and sales enablement tools (SIP, PDS2PIMS, Loftware, etc.), • Develop and maintain technical data sheets, specifications, fiber calculation tool(s), and application guidelines., • Collaborate with marketing to create technical messaging, training content, and project profiles., • Ensure products align with relevant standards and guidelines (e.g., ASTM C1116, ASTM D7508, ASTM A820, EN standards, UL, NSF SDI and ACI guidance)., • Track evolving codes, sustainability requirements, and industry specifications affecting fiber reinforcement., • Support third-party testing, certifications, and performance validation., • DOT – QPL Product Applications and Acceptance., • Qualify suppliers’ fiber products as necessary – steel, nylon, etc. to ensure full compliance with Sika Specifications, packaging and labeling requirements., • Establish and maintain supplier trading specification agreements for supplied fibers. Qualifications • Bachelor's degree in Civil Engineering, Materials Science, Chemical Engineering, or related discipline., • Minimum 5 years of professional experience in concrete fiber reinforcement systems, including synthetic macro/micro fibers, steel fibers, and/or hybrid reinforcement systems., • Comprehensive knowledge of concrete behavior, mix design principles, and reinforcement mechanisms., • Demonstrated expertise in ASTM/ACI standards and performance testing methodologies., • Established track record of managing products across both technical and commercial dimensions with measurable business impact. Travel Requirements: 25-35%, including customer site visits, field assessments, and industry conferences. Additional Information · 401k with Generous Company Match · Bonuses · Medical, Dental, and Vision Benefits · Paid Parental Leave · Life Insurance · Disability Insurance · Paid time off, paid holidays · Floating holidays + Paid Volunteer Time · Wellness/Fitness Reimbursements · Education Assistance · Professional Development Opportunities · Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is building a safety first culture, and is hiring for an experienced Safety Manager to lead our Environmental, Health, and Safety (EHS) initiatives. You will ensure a safe working environment for a team solving some of the world’s hardest problems. This role will have a high degree of autonomy in establishing safety protocols for the technologies we are developing.Key Responsibility Areas: • Foster a safety-first culture across the organization, • Manage and develop company policies, programs, and procedures regarding lab safety and electrical safety, • Conduct regular safety audits and risk assessments of experimental setups and manufacturing areas, • Work with technical teams to develop safety plans and Job Hazard Analyses to ensure projects can move quickly and safely, • Manage employee onboarding and new hire orientation processes regarding safety training, • Ensure compliance with OSHA, EPA, and other regulatory bodies, • Lead emergency response planning and incident investigationsIdeal Experience & Skillsets:, • 7+ years of relevant work experience in EHS, preferably in R&D, energy, or industrial settings, • Experience with cryogenics, high voltage, magnetic fields, and radiation safety is highly desirable, • Strong ethics and discretion, • Ability to collaborate and find creative solutions to problems while maintaining strict safety standards, • Excellent oral, written, and interpersonal communication skills for delivering training, • Ability to thrive in a fast-paced, dynamic startup environmentCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Start the next chapter of your career with Crane Aerospace & Electronics!. As a team member at Crane Aerospace and Electronics, you'll enjoy:. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check.

Order Management, Supply Chain, Manufacturing, Engineering, Quality, Finance, and Program Management to ensure value stream success. The Value Stream Manager II (VSM) ensures customer satisfaction by leading a cross functional team to execute the Annual Operating Plan for Safety, Quality, Delivery,

Job DescriptionDescription: Job Summary: The Operations Manager’s position reports directly to The Vice President/General Manager. The Operations Manager oversees all aspects of the manufacturing facility's day-to-day production duties, including production planning, staff supervision, cost management, and ensuring that production targets are met while adhering to quality, safety, and customer requirements. This role will lead a team of dedicated manufacturing professionals to build and deliver electronic manufacturing services (EMS) specializing in high-reliability, mission-critical electronics for the defense, aerospace, medical, and industrial sectors. Oversee the manufacture of complex printed circuit board assemblies (PCBA), cable and wire harnesses, and full system integration ("box builds"), primarily for high-mix, low-volume programs. Supervisory Responsibilities: The position will have 4 to 5 direct reports, with additional The Operations Manager oversees all aspects of the manufacturing facility's day-to-day production duties, including production planning, staff supervision, cost management, and ensuring that production targets are met while adhering to quality, safety, and customer requirements. Duties/Responsibilities: -Execute production schedules to meet customer demand. -Delivering high quality, reliable and on-time products to customers. -Maintain MFG dashboard: product pipeline, MFG schedules, scorecard, and risks/mitigations. -Assist in annual budgeting and collaborate with Finance to ensure needs are within budgetary constraints/forecasted budgets. -Plans and organizes daily activities related to production and operations. -Measures productivity by analyzing performance data, financial data, and activity reports. -Coordinates with other support departments such as human resources, finance, and logistics to ensure successful production operations. -Determines labor needs to meet production goals. -Assists with, or prepares and updates, organization’s operations manual and policies. -Performs other related duties as required. Required Skills/Abilities: -Experience operating in an ISO 9001:2015/AS9100 Quality Environment strongly preferred. -Computer literate in Microsoft Office tools and MRP/ERP systems (preferably Syteline). -Excellent managerial and supervisory skills. -Good communication skills and the ability to motivate team members to realize defined objectives and goals. -Strong people management and coaching skills -Extensive knowledge of operations and production management. -Ability to interpret financial data as needed to set production goals. -Excellent organizational skills and attention to detail. -Excellent written and verbal communication skills. -Proficient in Microsoft Office Suite or similar software. Education and Experience: -BS+ in Manufacturing, Mechanical, Electrical, Manufacturing Engineering, or similar preferred. -5+ years of experience in manufacturing leadership preferred. Experience with analytical instrumentation and/or chemical processes preferred. General Work Conditions: -Physical Demand - Managers often need to be able to lift and carry materials, sometimes up to 50-75 pounds, and be on their feet for extended durations. They also need to have normal visual and hearing abilities to operate equipment and supervise staff. -Work Environment - Their work environment is dynamic, involving direct supervision of employees, collaboration with other departments, and regular reporting to leadership. -Safety Requirement - Ensuring a hazard-free environment, providing and enforcing safety policies, conducting regular training on topics like OSHA and incident response, and investigating accidents to prevent future occurrences. They must also manage compliance with relevant safety regulations. -Travel Requirement (%)- 5% Requirements:

Job DescriptionJob Title: Construction Superintendent – High-End Retail Projects Job Description This role oversees day-to-day on-site operations for high-end retail construction projects, with a strong focus on planning, communication, and management. The superintendent leads site supervision, coordinates subcontractors, maintains project schedules, and ensures that work meets quality, safety, and budget expectations for high-end retail fit-outs in mall environments. Responsibilities • Provide direct, day-to-day on-site supervision of the field labor force and subcontractor staff., • Attend meetings with clients and contractors to review project status, resolve issues, and align on expectations., • Review and remain thoroughly familiar with the project budget and general conditions estimate to support cost control., • Review and approve trade contractor payment applications in coordination with the Project Manager., • Develop and maintain a comprehensive site logistics plan in coordination with the Project Manager, clients, and contractors., • Conduct regular quality and safety inspections to ensure all work meets project standards and regulatory requirements., • Coordinate site testing and inspection activities with relevant parties and ensure timely completion., • Manage construction schedules, including preparing detailed look-ahead schedules and ensuring all activities occur on or ahead of scheduled dates., • Prepare and submit accurate and timely Superintendent’s Daily Reports documenting progress, issues, and site conditions., • Participate in project meetings, including subcontractor meetings, and conduct foremen’s meetings to communicate plans, expectations, and updates., • Review and assist in developing clear scopes of work for each subcontractor to support accurate execution and accountability., • Oversee high-end retail fit-out projects in mall environments, ensuring work quality aligns with premium retail standards.Essential Skills, • At least 5 years of experience in commercial construction., • At least 5 years of experience as a site supervisor or superintendent on active construction projects., • Proven experience in retail construction, including high-end retail fit-outs., • Hands-on experience with ground-up commercial construction projects., • Strong site supervision skills, including directing subcontractors and field labor., • Ability to plan, communicate, and manage all aspects of on-site construction activities., • Solid understanding of construction management principles, including budgets, schedules, and logistics., • Ability to review and understand project budgets and general conditions estimates., • Competence in reviewing and approving trade contractor payment applications., • Experience preparing and maintaining construction schedules and look-ahead schedules., • Strong focus on safety and quality, with experience conducting site inspections., • High school diploma or equivalent education.Additional Skills & Qualifications, • Experience working on high-end retail projects in mall environments., • Familiarity with construction of interior retail spaces, including coordination of finishes and fixtures such as light fixtures., • Strong communication and interpersonal skills for effective collaboration with clients, contractors, and subcontractors., • Ability to travel nationally to project sites when needed., • Proven ability to lead foremen’s meetings and subcontractor coordination meetings., • Detail-oriented approach to documentation, including daily reporting and scope-of-work reviews.Work Environment This position is fully site-based at active construction projects, primarily focused on high-end retail fit-outs in mall environments. The superintendent works in the field, directing subcontractor staff and coordinating day-to-day construction activities. The role involves frequent interaction with clients, contractors, and project teams on site. The work environment includes typical construction site conditions, such as exposure to noise, dust, and ongoing construction activities, and requires appropriate safety attire and adherence to site safety protocols. Travel to project sites, including potential national travel, may be required based on project needs. Job Type & Location This is a Contract position based out of Paramus, NJ. Pay and Benefits The pay range for this position is $36.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionBenefits: • 401(k) matching Our company is a world leader in manufacturing fuses for the global market from Electronic Range fuses to High Voltage AC and DC fuses. Experience in the Electrical Power industry, with an understanding of circuit protection requirements a plus. Requirements/Responsibilities: Bachelor of Degree, Business or Project Management, and Electrical Engineering. Minimum of 5 years experience in Sales required. Minimum of 5 years' experience in Project Management. Experience in power electronics and power systems. Hands-on individual, capable of offering proposals, commercial and technical assistance to Engineers and Representatives. Attention to detail, with the ability to simplify complex issues, and relate technical explanations back to the commercial value of the product. Dynamic personality with excellent interpersonal, supervisory, and presentation skills. Must have stellar communication skills on multiple platforms, including verbal, written, face-to-face, and via telephone. Experience managing direct sales and manufacturers reps. • Excellent organizational skills and the ability to prioritize and manage multiple tasks with changing deadlines., • The ability to meet tight deadlines and follow projects through to completion., • Ability to conduct product, customer and market research., • Prepare and give technical presentation., • Analyze customers needs and propose technical solutions., • Must be willing to travel (light) within North America., • Well-rounded individual able to support our Field Sales force., • Bilingual (Spanish) a plus, but not a must.

Job Description Technical Project Manager – Manufacturing Systems Newark, NJ $70,000 – $120,000 Schedule: Monday–Thursday: 7:30 AM – 4:30 PM Friday: 7:30 AM – 12:00 PM (Winter) / 7:30 AM – 1:00 PM (Summer) If production slows down because of systems, this role fixes it. We are hiring a Technical Project Manager to sit inside the manufacturing environment and drive execution of system upgrades, feature requests, integrations, and production-impacting technology initiatives. This is not an IT help desk role. You will be on the floor, in conversations, and responsible for keeping projects moving. About the Role You will act as the operational bridge between Production, Operations, Engineering, and internal tech teams. Your job is to eliminate ambiguity, push projects forward, and make sure system changes actually support the shop. When a bug affects production, you don't wait. When a feature request stalls, you follow up. When requirements are unclear, you clarify them. This role requires presence, persistence, and structured follow-through. What You'll Own • Tracking and driving all shop-related system projects and enhancements, • Translating production needs into clear, actionable technical requirements, • Managing timelines and cross-team accountability, • Escalating production-impacting issues quickly, • Coordinating system upgrades, integrations, and workflow improvements, • Verifying bug fixes in real production environments, • Maintaining clear documentation of scope, ownership, and status, • Ensuring adoption and proper system usage on the floor Must-Haves • Experience working in a manufacturing or production environment, • Background in project coordination, systems implementation, or operations management, • Strong execution mindset with proven follow-through, • Ability to communicate clearly between technical teams and shop-floor operators Nice-to-Haves • Exposure to ERP, MES, CAD/CAM, or manufacturing software systems, • Experience supporting integrations between operational systems, • Familiarity with workflow mapping or process improvement initiatives, • Technical aptitude to understand system architecture at a practical level What Success Looks Like First 90 Days • Gain full understanding of current systems and shop workflows, • Establish visible tracking for all active tech projects, • Resolve key production-impacting system issues First 6 Months • Improve turnaround time on feature requests and bug fixes, • Strengthen communication flow between tech and production teams, • Reduce recurring system-related disruptions, • Build a structured, accountable project tracking process If you have manufacturing experience and are confident driving technical projects to completion without letting things stall, we want to hear from you. If you meet most of the core requirements and take ownership seriously, apply. Email Resume: Apply Online: Refer a friend, get up to $1000!

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the Go-To-Market Team The Go-To-Market Team is responsible for ensuring customers realize measurable value from the automation we deploy. From pre-deployment coordination through onboarding and long-term engagement, the team drives adoption, strengthens relationships, and ensures customers achieve meaningful operational outcomes. Customer Operations serves as the connective tissue between customers and internal teams, ensuring expectations are clear, communication is proactive, and execution is coordinated. The team also captures customer feedback and insights to continuously improve the product, delivery experience, and long-term customer outcomes. About the role: As a Customer Operations Project Manager, you will own the customer relationship from pre-deployment through long-term engagement, ensuring a seamless experience and sustained value realization. You will serve as the central point of contact for customer coordination, orchestrating internal teams, documentation, and communication to ensure onboarding and ongoing engagement are proactive, clear, and consistent. Success in this role requires strong operational discipline, the ability to anticipate risk, and a customer-advocacy mindset that surfaces feedback internally, improves the customer experience, and identifies opportunities to expand customer impact over time. In this role you will: • Own the customer relationship from pre-deployment through long-term engagement, • Serve as the primary point of contact for customer communication and non-technical coordination, • Drive successful onboarding by ensuring timelines, documentation, and internal handoffs are executed effectively, • Partner cross-functionally with Sales, Fleet Operations, and Engineering to align customer expectations and delivery execution, • Monitor customer health, engagement, and risk signals and take proactive action when issues arise, • Manage customer communications during key milestones, changes, and escalations to maintain trust and clarity, • Identify opportunities to expand customer impact by understanding operational goals and usage patterns, • Partner with Sales to support expansion opportunities through strong relationships and customer insight, • Capture and elevate the voice of the customer to inform product, process, and experience improvements, • 3–7+ years of experience in customer success, account management, client services, or customer-facing program management, • Proven ability to manage complex customer relationships and drive outcomes through cross-functional coordination, • Strong operational discipline, follow-through, and ability to manage multiple priorities simultaneously, • Experience working with industrial, manufacturing, hardware, robotics, or operationally complex customers preferred, • Excellent written and verbal communication skills with confidence in customer-facing conversations, • Comfort navigating ambiguity and evolving processes in a fast-growth environment, • Strong judgment and calm execution during escalations, shifting priorities, and time-sensitive customer needs, • Ability to identify expansion opportunities through strong relationships, customer insight, and operational outcomes, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$100,000—$130,000 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job DescriptionManager Manufacturing OperationsAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Life Sciences, Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Primary Processing Unit (PPU), Manager, Manufacturing Operations is responsible for efficient capacity utilization of site resources to meet customer demand. They will partner with support functions to deliver on customer demands. This leader is accountable for the management of client projects at the site and for delivery of results within project scope, agreed timelines, contract requirements, revenue targets, as well as compliance and regulatory requirements. The Manager, Manufacturing Operations is responsible for profit and loss within their PPU and will deliver on revenue. This role will also drive individual and team development to ensure a prepared and empowered workforce to become the provider of choice for the industry. • Meet client process demands through planning, scheduling, manufacture and delivery., • of clinical cell therapy products according to established procedures, regulations and contract., • Ensures manufacturing documentation is closed out in a timely manner in accordance with applicable regulations and per contract., • Ensures capacity availability of resources (room/equipment/staff) to perform clinical manufacture for clients per contract., • Ensures process hours are charged - tracked to meet contract and revenue targets., • Accountable for maintaining a mechanism to work with clients to troubleshoot problems, suggests improvements and determines & advocates for value-add projects., • Assures manufacturing space is kept in a clean, validated state in compliance with company procedures, GMP and applicable regulations, • Ensures on the job training program and resources for new associate (proficiency) training and cross training of existing staff., • Ensures a safe work environment for employees., • Ensures department staff compliance with corporate and site-specific HR policies, safety and business policies and practice., • Approves job specific curriculum for the training and professional development of department staff., • Holds regular staff and 1:1 meetings to emphasize corporate culture, maintain morale, and provides a forum for staff development and discussion., • Responsible for the profit and loss for the PPU, • Deliver on revenue, • Assures compliance with budget, • Liaison with support groups – supply chain, training, quality systems, and business development, • Partners with clients along with Project Management and team leadership; drives the account management and liaison with the clients, • Sets team expectations and goals and delivers the business direction for the PPU, • Sets KPIs & ROIs targets and assures PPU metrics are maintained and tracked monthly., • Coordinates with PPU leadership and team meetings and determines PPU strategy development, • Accountable for driving the spirit of continuous improvement, • Collaborates with Business Development to ensure compliance and contract requirements, • Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Directly supervises the following roles: Associate Manager, Manufacturing, Manufacturing Associates, Lead Manufacturing Associates, Production Support Associates, Technical Trainers, Compliance InvestigatorsREQUIREMENTS, • Bachelor's degree (ie Biology, Biotechnology, Bioengineering, Chemical Engineering)., • 5-7 years of cGMP environment, aseptic processing, mammalian cell culture, cell processing, cryopreservation experience., • 5-7 years of leadership experience or equivalent combination of experience., • Strong business acumen, • Deep understanding of cGMP and cGLP, • Working knowledge of financial operations and budget development, • Relevant IT skills (Visio, Microsoft Project and Excel), • Ability to think strategically and tactically (detail-oriented), • Strong collaborative and influencing skills and ability to work well in a cross-functional, matrixed environment, • Analytical and problem-solving skills, • Strong written and oral communication skills, • Meeting management/facilitation skills/teamwork, • Ability to multi-task team is essential, • Flexible and able to adapt to company growth and evolving responsibilities, • Drive to create and maintain order in a fluid technically complex environment, • Integrity, accountability and strong dedication to regulatory compliance, • Continuous improvement mindset, • List required training that must be completed by incumbent in order to fulfill the responsibilities for this role. Examples can include aseptic techniques, gowning qualifications, manager training, GMP, etc., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays and as required by the company, • May be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen, • Must have the ability to work in the cleanroom environment for extended period of time, • Must have the ability to work with specialized equipment, • May work with hazardous materials and chemicals, • Environment requires gowning, hair net, safety glasses, gloves, and foot coverings.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionPosition Overview: Thea Energy is seeking an experienced and motivated Engineering Program Manager to lead a large, complex custom product development program within the fusion energy industry. This is a highly visible role in the organization leading development of core magnet technology. This role will act as a force multiplier by increasing development velocity and raising the bar on execution standards. You will oversee the design, build, and test phases of critical hardware, ensuring the successful delivery of components that will advance fusion technology. Key Responsibility Areas: • Define and drive program planning and execution across hardware design, test, supply chain, and manufacturing teams, with a clear plan of record and critical-path ownership, • Drive the design, build, and test cycles for complex hardware components., • Partner with technical leads to define product requirements, validation strategies, and decision gates, ensuring design tradeoffs are explicitly documented and understood across teams, • Own engineering BOM strategy and NPI readiness, working closely with engineers and supply chain to balance performance, cost, availability, and manufacturability, • Provide regular, detailed program updates to leadership and stakeholders, highlighting progress, technical challenges, and proposed solutions., • Proactively identify and manage technical, schedule, budget, and quality risks. develop effective mitigation strategies and contingency plans.Ideal Experience & Skillsets:, • Bachelor's degree in Engineering or a related technical field., • 5+ years leading complex, multidisciplinary engineering programs ideally involving large scale hardware development in climate tech, aerospace, nuclear, or related industries., • Demonstrated ability to work deeply with technical teams (physics, mechanical engineering, magnet engineering, manufacturing engineering) and solve first of a kind problems., • Strong grasp of DFM principles and the realities of design, build, test cycles., • Excellent communication skills and the ability to influence across engineering, operations, and leadership teams, • Proven ability to distill complex technical programs into clear risks, decisions, and priorities for leadership audiences, • Comfortable operating in a fast-moving startup environment, with high ownership and ambiguity., • Nice to have: product and technology roadmap development experience.Company Benefits:, • Salary range $130,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionPosition Overview: Thea Energy is seeking an experienced and motivated Technical Program Manager to lead a large, complex custom product development program within the fusion energy industry. This is a highly visible role in the organization leading manufacturing development of core magnet technology. This role will act as a force multiplier by increasing development velocity and raising the bar on execution standards. You will oversee the scaling of magnet production from concept to pilot and commercial scale ramps that will advance fusion technology. Key Responsibility Areas: • Lead cross-functional manufacturing and operations programs from concept through pilot production, including process and equipment design, installation, qualification, and ramp., • Oversee the selection, qualification, and management of external custom manufacturing vendors, ensuring adherence to specifications, quality standards, and delivery schedules, with a focus on novel materials and supply chain risk., • Guide the transition from prototype to large-scale manufacturing, including the integration of large equipment and continuous process manufacturing techniques., • Provide regular, detailed program updates to leadership and stakeholders, highlighting progress, technical challenges, and proposed solutions., • Establish and track key manufacturing readiness metrics (equipment readiness, process capability, throughput, yield, and reliability)., • Proactively identify and manage technical, schedule, budget, and quality risks. develop effective mitigation strategies and contingency plans.Ideal Experience & Skillsets:, • Bachelor's degree in Engineering or a related technical field., • 5+ years leading complex, multidisciplinary engineering programs ideally involving large scale hardware development in climate tech, aerospace, nuclear, or related industries., • Demonstrated experience of working in a manufacturing ramp setting and delivering concept and pilot scale manufacturing development milestones, • Demonstrated ability to work deeply with technical teams (physics, mechanical engineering, magnet engineering, manufacturing engineering) and solve first of a kind problems., • Strong understanding of design and manufacturing processes and the realities of design, build, test cycles., • Excellent communication skills and the ability to influence across engineering, operations, and leadership teams, • Proven ability to distill complex technical programs into clear risks, decisions, and priorities for leadership audiences, • Comfortable operating in a fast-moving startup environment, with high ownership and ambiguity., • Nice to have: manufacturing roadmap development experience.Company Benefits:, • Salary range $130,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

The Senior Manufacturing Engineer Manager leads the Manufacturing Engineering team, overseeing machining and special process development, CNC and CMM programming, tool and fixture design, and process validation. Evaluate and approve engineering requests, determining feasibility, make/buy status, and

Background in retail manufacturing with experience managing multiple products. We are looking for a strategic Product Manager to lead innovation and drive product strategy across a broad portfolio. The ideal candidate has experience in retail manufacturing environments with exposure to multiple prod

Assistant Managers, Operations manage business enablers (including financial, profit and loss [P&L], budget, expenses, and cash) and ensure inventory, supplies, vendor relationships, technology, and facilities are maintained and maximized. Assistant Managers, Operations also execute company-driven o

We are looking for a strategic Product Manager to lead innovation and drive product strategy across a broad portfolio. The ideal candidate has experience in retail manufacturing environments with exposure to multiple products, preferably in durable, rugged, or industrial-style product categories. Ba

This job is with Reckitt, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community.Please do not contact the recruiter directly.Home to the world's best loved and trusted hygiene, health, and nutrition brands.Our purpose defines why we exist: to

We are seeking an experienced Project Manager to lead complex, cross-functional initiatives within a fast-paced digital media environment.

Pressed Juicery is growing and hiring a General Manager for our store in Moynihan Hall!. The General Manager is the driver of their store's success. From growing sales to leading community engagement, the General Manager creates a space where both guests and team members thrive.

Effective communication skills to collaborate across departments including manufacturing operations and engineering teams. Our manufacturing client in Irvington, NJ is looking for a Manufacturing Engineer to support the rubber injection molding operations for medium voltage electrical products by op

We are hiring a Freight & Logistics Manager to lead inbound transportation and international logistics operations within a manufacturing environment.

The Operations Manager functions as the primary day-to-day manager for the Enrollment Management unit, providing leadership, accountability, and operational structure while partnering closely with the Vice President of Development & Enrollment Management on strategy and performance improvement.