Trabajos manufacturing production en Deer Park, New York - Page 2Crear alertas

Job DescriptionSalary: $19.50 includes shift diferential Job description: Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Companys broad product portfolio, born as Mama Mancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit . Exciting opportunity alert! A dynamic food manufacturer is on the lookout for a passionate Production Food Associate to join their vibrant team. Don't miss your chance to be a part of a thriving company that values your contributions. Position Summary: The FSQA Associate acts as a hands-on resource for daily food safety and quality checks, ensuring compliance with enterprise standards and Grandma Quality expectations. This role supports the Supervisor in training and guiding Associates. Key Responsibilities: • Perform pre-op inspections, in-process checks, and finished product evaluations., • Verify sanitation completion and environmental monitoring results., • Maintain accurate FSQA records and assist with audit preparation., • Train Associates on proper inspection techniques and documentation., • High school diploma or equivalent; technical training in food safety preferred., • 2+ years of FSQA or QA experience in food manufacturing., • Ability to stand, bend, and lift up to 40 lbs. Benefits: • 401(k), • Employee discount, • Health insurance, • Paid time off, • Parental leave Application Question(s): • Experience Food manufacturing. Language: • Spanish (Required) Location: • Farmingdale, NY 11735 (Required) Shift availability: • Day Shift (Preferred), • Night Shift (Preferred) The available position is for the third shift, • Overnight Shift (Preferred) Ability to Commute: • Farmingdale, NY 11735 (Required) Work Location: In person

Job Description Job Title: RF Electronics Repair Technician Job Description This role focuses on repairing and testing complex RF and electronic equipment to ensure it meets documented performance standards. You will troubleshoot operational failures down to the component level, replace or repair malfunctioning parts, and perform detailed calibrations and alignments. The position combines hands-on bench work with the use of specialized test equipment and requires close collaboration with Production, Test, Field Service, and Engineering teams. Responsibilities • Repair semi-complex electronic equipment such as printed circuit boards, multiplexing systems, and amplifiers., • Troubleshoot RF and electronic equipment by performing a variety of diagnostic tests to determine the cause of operational failure., • Reconstruct or replace defective electronic and mechanical parts as required, including making necessary mechanical adjustments., • Review engineering change notices related to the design and operation of equipment and apply relevant updates in repair work., • Align, adjust, and calibrate equipment according to detailed specifications and engineering documentation., • Apply new paint or other protective coatings to equipment components as needed to maintain product standards., • Test repaired equipment to documented performance standards using appropriate test procedures and equipment., • Maintain accurate records of repairs, calibrations, and tests in a computer database system., • Support product investigations by providing technical assistance to Production, Test, Field Service, and Engineering departments., • Associate or Bachelor’s degree in Electronics, Electrical Engineering, or equivalent practical experience., • 1 to 3 years of related experience as an electronics or RF repair technician., • Demonstrated troubleshooting skills with RF and microwave (MW) equipment and circuits., • Ability to diagnose and repair electronic components at the board and component level., • Proficiency in using oscilloscopes, multimeters, and other electronic test equipment., • Skilled in the safe and effective use of hand tools for electronic and mechanical repair., • Experience testing circuits and verifying equipment performance against specifications., • Strong attention to detail in following test procedures, documentation, and engineering change notices., • Background in electrical engineering concepts related to RF and microwave systems., • Experience working with multiplexing systems, amplifiers, and printed circuit boards., • Familiarity with general test methodologies for RF and electronic products., • Ability to collaborate effectively with Production, Test, Field Service, and Engineering teams., • Willingness to learn new equipment, procedures, and technologies with guidance from leads and supervisors. This position is based on a manufacturing floor environment with dedicated work benches and defined work areas. You will primarily work at an individual bench performing troubleshooting, repair, and testing of RF and electronic products, and may periodically move equipment into specialized chambers or test areas depending on the test requirements. You will work closely with a lead and a supervisor and receive training and support as you become familiar with the products and processes. The role follows a 9/80 work schedule, with nine-hour days during the first week and an eight-hour day on Friday, providing a structured and predictable work pattern. Compensation is paid on a bi-weekly basis. The organization offers a comprehensive benefits package that may include medical, dental, vision, 401(k), flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation, and holidays, with benefits typically available on the first of the month following the hire date. Some positions may offer paid time off and holiday benefits only. Additional compensation, such as annual or quarterly bonuses and shift premiums for alternative shifts, may apply depending on position assignment and location. The work environment emphasizes safety, collaboration, and continuous learning while working with a variety of RF and electronic test equipment and tools. Job Type & Location This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on May 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Lindenhurst, NY Compensation: $25.00/hour with $.50 increases after 90 and 180 days upon successful review Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: Monday to Friday 1:00pm-9:30pm Ability to work holidays and weekends per business needs Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment Other great benefits: Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits. Responsibilities • Operate, changeover, clean, troubleshoot, and complete basic maintenance according to company standards on production equipment consisting of fillers, labelers, case packers, palletizers, blow mold machines, wrappers, and forklifts, • Record the following: preventative maintenance activities, quality inspection data, equipment downtime, production output, and other key metrics, • Adhere to safe work practices, good manufacturing practices, and participate in safe behavior observation programs, • Communicate effectively when issues arise that prevent operating to company standards/procedures, • Meet or exceed performance metrics including efficiency, production, and downtime, • Perform mathematical calculations as needed, • Ensure quality product is sent to customers by completing hourly quality checks, • Inspect raw materials against quality standards before loading them, • Interact with team members from various departments (Quality Assurance, Maintenance, etc.) to maximize output and efficiency, • Attend shift, team, and plant meetings during their scheduled times, • Measure and continuously improve the line operation as a team and with other technicians, • Crosstrain in other areas to support operations during downtimes, • Maintain your workstation in an organized and clean manner ensuring safety and good manufacturing practices, • Focus on safe work practices and high-quality output while Qualifications • High school diploma, GED or equivalent experience, • Must have a valid Driver's License and ability to adhere to Primo Brands Motor Vehicle Policy., • Prior experience in clean manufacturing preferred, • Ability to work the scheduled shift which includes start-up and handover meetings, • Exposure to high-speed production and/or basic maintenance is preferred, • Troubleshooting and root cause analysis experience, • Ability to work on your own and with a team, • Strong communication skills both face to face and over the radio, • Computer skills with knowledge of Microsoft applications, SAP experience a plus, • Forklift experience is preferred, but we are able to train new associates, • Ability to lift and move 50 lbs. and stand on your feet for extended periods of time throughout the day Primo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law

Job DescriptionDescription: JOB TITLE: Quality Assurance Specialist Job Summary: We are seeking a Quality Assurance Specialist to join our team. The Quality Assurance Specialist is responsible for supporting and maintaining the highest quality standards in all manufacturing processes and products. This role involves overseeing first article inspections, and quality management systems, while acting as the focal point for customer interactions related to quality. The ideal candidate will have experience in aerospace manufacturing, ISO 9001/AS9100 standards, and an eye for detail in product audits and documentation. Key Responsibilities: · Review contracts from Quality Assurance perspective to ensure all quality requirements are met. · Maintain and report the status of the government’s inventory assets. Create and affix customer returned material tags to customer assets upon receipt. · Manage the Quality Management System (QMS) and ensure proper document control. · Schedule and conduct internal audits to maintain compliance with ISO 9001 and AS9100 standards. · Conduct scheduled and random production audits to maintain adherence to quality standards. · Review and analyze customer performance ratings for accuracy and work with customers to adjust customer performance ratings when there is a discrepancy with the customer’s delivery and/or quality data. · Maintain an active supplier quality delivery and quality performance matrix and interface with the supplier if the supplier’s quality performance falls below the QMS documented levels. · Perform the organization’s FSO (Facility Security Officer) requirements and ensure that the organization is meeting or exceeding the standards that are defined by FC-PO-001 Security Manual, FC-PO-002B Classified Material Receiving & FC-PR-003 Security Debriefing. Required Qualifications: · Minimum of 5 years of experience in Quality Assurance, preferably within aerospace or related industries. · Hands-on experience with ISO 9001 and AS9100 standards. · Expertise in First Article Inspection (FAI) documentation and processes. · Proficiency in using inspection equipment such as calipers, micrometers, optical comparators, Micro-Hite, and microscopes. · Ability to read and interpret engineering drawings, with a strong understanding of Geometric Dimensioning & Tolerancing (GD&T). · Strong attention to detail and the ability to work independently in a fast-paced environment. · Excellent verbal and written communication skills. · Proficiency in MS Office (Excel, Word, Outlook). · Must be able to obtain a U.S. government security clearance (clean criminal record required). Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Accounting department you will be working with dedicated professionals who support and interact with all areas of the company. Our full time employees enjoy competitive benefits including: • 401(k) with generous employer match, • Health Insurance, • Dental Insurance, • Paid holidays, • Paid vacation Responsibilities: Responsibilities include but are not limited to checking the overall quality of the manufacturing and/or packaging operations. Perform all line releases, product quality checks and batch record/work order review. • Supports production activities related to the timely production of finished goods., • Performs line releases and product quality checks including batch record/work order review for QA release., • Assists in the validation/qualification of batches, including sampling., • Ensure that any required sampling is performed and samples are submitted to laboratory., • Maintain records and organize documents to support packaging/manufacturing operations in an efficient manner., • Assist when needed for any pertinent investigations involving respective areas., • Monitor warehousing and staging areas to ensure materials are being received/shipped/maintained within cGMP and SOP Guidelines., • Report building maintenance issues to ensure compliance with AIB, HACCP, cGMP regulations and pertinent SOP's and report them to the QA Supervisor., • Assist in the monitoring and maintenance of the Pest control, calibration and temperature monitoring programs., • All other duties as assigned Education and Experience: • HS Diploma, • At least one year of directly related experience. Work Environment: • In person. There is no remote option for this role. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job Description Reports To: Director of Supply Chain Department: Supply Chain Location: Amityville, NY (HQ) FLSA: Exempt Status: Full-Time, 100% Onsite Position (No Remote) Company Summary: Since 1964, we have been the world’s largest supplier of fudge making equipment, ingredients, and marketing expertise. If you ever go on vacation (and we hope you do!), you’ve probably seen and maybe purchased out fudge. Since our fudge is always made fresh in each retail store (and sold under the retailer’s own name), we are the best kept secret in retail confectionary. With a strong presence in numerous countries and a vast network of retailers, including well-known establishments in the tourism sector, we are committed to delivering outstanding products and services. Our company culture fosters growth and embodies the "Hungry, Humble, Smart" philosophy. We seek individuals who are driven, self-motivated, and always eager to learn and do more. Being humble, our team members prioritize the team over self and lack excessive ego or concerns about status. Additionally, they possess strong interpersonal skills, enabling them to work effectively with others. We value a strong work ethic and a positive & vibrant work environment. Job Summary: We are seeking a hands-on Supply Chain Manager to manage and execute day-to-day supply chain operations across procurement, production planning, inventory, logistics, and distribution. This role is critical to ensuring the right products are available at the right time, in the right location, and at the right cost. You will work closely with cross-functional teams and third-party partners to maintain operational efficiency, improve material flow, and support consistent order fulfillment. This is a highly operational role requiring strong execution, attention to detail, and the ability to manage real-time supply chain challenges. Key Responsibilities Supply Chain Execution • Execute supply chain plans to support production and customer demand, • Improve inventory positioning and material flow across facilities and 3PL partners, • Monitor performance and resolve operational issues impacting service or cost, • Manage demand planning in collaboration with sales, • Maintain and improve forecasting models based on historical trends, • Adjust production schedules and material forecasts as needed, • Monitor forecast accuracy and take corrective action, • Manage inventory levels across all locations, • Maintain safety stock, reorder points, and min/max levels, • Reduce excess, obsolete, and slow-moving inventory, • Support supplier performance tracking (delivery, quality, cost), • Communicate material risks, delays, or shortages, • Monitor freight performance and identify efficiency improvements, • Ensure proper product flow between suppliers, facilities, and customers, • Address supply chain disruptions including delays and shortages, • Resolve issues impacting production or customer orders, • Track and report key KPIs (inventory, service levels, forecast accuracy), • Create and improve SOPs in collaboration with team members, • Maintain ERP/MRP data accuracy, • Identify and implement process improvements EDUCATION & QUALIFICATIONS Education • 5-7+ years of progressive experience in supply chain, logistics, procurement, or operations, • Hands-on experience with planning, inventory management, and supply chain execution, • Strong proficiency in ERP/MRP systems (e.g., Business Central, SAP, Oracle, NetSuite, or similar), • Advanced Excel skills (forecasting & data analysis), • Experience with supply chain planning and forecasting methods, • Strong analytical and problem-solving skills, • Consistent track record of working effectively with cross-functional teams, ensuring clear communication, alignment on priorities, and efficient execution of day-to-day supply chain operations., • Ability to make data-driven decisions under pressure, • Paid Time Off Plan and Paid Holidays, • Medical, Dental & Vision Insurance, • Company Paid Long Term Disability Insurance, • Flexible Spending Accounts (FSA), • 401(k) Plan, • Life/AD&D Insurance, • Employee Assistance Program, • Ice Cream Fridays during fair weather months, • On-Site Gym with free fitness classes and personal training, • Flu Shot Clinic held annually on-site, • Birthday & Holiday Celebrations held to foster fun and team interaction, • Employee Appreciation Events with great food, fun and team building for all team members and their families, • Charity Drives held throughout the year to give all Calico team members an opportunity to support our local community Ready to make your world a little sweeter? Come join the Calico Cottage Confections, LLC. team! Job Type: Full-Time, Salary Hours: Monday-Friday, 8:30 PM - 5:30 PM Work Location: Amityville, NY 100% Onsite Position (No Remote) Salary Range: $105,000.00 - $115,000.00 Calico Cottage Confections, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description The Manufacturing Engineering Technician supports the development, implementation, and improvement of manufacturing processes and systems. This role bridges engineering and production by assisting in equipment setup, process documentation, troubleshooting, and continuous improvement initiatives to ensure efficient, safe, and high-quality manufacturing. Main Job Duties: · Assist engineers in developing, testing, and implementing manufacturing processes. · Prepare and update work instructions, process flow diagrams, and technical documentation. · Collect and analyze data on production metrics such as downtime, scrap, and cycle times. · Participate in process improvement initiatives such as 5S or Lean activities. · Support the setup and maintenance of manufacturing equipment and fixtures. · Troubleshoot machinery and provide technical support to operators and maintenance teams. · Assist in designing and fabricating jigs, fixtures, and tooling as needed. · Communicate effectively with production staff, especially Spanish-speaking operators, to understand issues and relay process updates. · Support new product introductions (NPI) by assisting with process trials, documentation, and initial production runs. · Train production operators on new processes and equipment when needed. Education: High school diploma or GED required. Associate’s degree or technical certification in manufacturing technology, Mechanical Engineering or a related field is preferred by not required. Experience: 0-1 year of experience in manufacturing or technical support role Skills/Knowledge/Abilities: · 0-1 year of experience in manufacturing or technical support role. · Basic understanding of mechanical systems and manufacturing processes. · Ability to work collaboratively within the team & have good communication skills. · Able to use standard measuring tools/equipment, hand tools, etc. · Basic computer skills, word processing, presentation software and spreadsheets · Provide own mode of transportation. Desired Skills/Knowledge: · Mechanical and Manufacturing Engineering Skills sets, including mechanical drafting and 3D modeling. Knowledge of SolidWorks is a plus. · Knowledge in sheet metal fabrication, punching, CNC, forming, and associated tooling is a plus. · Exposure to Lean Manufacturing, Six Sigma, or 5S practices is a plus. Bilingual (English/Spanish) – needed #2127OS

Job Description Role overview We’re hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You’ll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you’ll do • Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements., • Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable)., • Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices., • Run, validate, and help prove out new CNC programs; support first-article / first-piece verification., • Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs., • Perform in-process and final inspection using standard precision metrology tools; document results as required., • Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management)., • Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world’s first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we’re dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Requirements Required qualifications • 3+ years experience as a CNC machinist/operator and setup technician in a precision environment., • Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently., • Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces., • Experience with live-tooling lathes, mill-turns, or multi-task machines., • Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials)., • Solid understanding of tooling, tool life, cutters, and fixturing methods., • Intermediate ability to interpret and apply GD&T., • Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities., • U.S. Person status required due to access to export-controlled technical data. Preferred qualifications • Experience with simultaneous 5-axis setup and operation., • Experience working with Okuma CNC machines and controllers., • Comfortable referencing a CAD model to verify dimensions/features (model-based measurement)., • Experience with CMM inspection (e.g., PC-DMIS or similar). Benefits What we offer • Competitive hourly pay at $33/hr-$43/hr (commensurate with experience), • Benefits: [Health/Dental/Vision/401(k)/PTO], • High-impact work on real aerospace hardware, • Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job DescriptionDescription: Job Description The individual will prepare design data for electrical/electromechanical aircraft parts using reverse engineering practices and coordinate with certification and material engineers along with FAA Designated Engineering Representatives. They ensure that design features are consistent with functional performance and safety requirements for the aircraft system installation and with standard manufacturing practices. Additionally, the engineer investigates in-service equipment failures to determine root cause and develop repairs to return parts to service. This requires close communication with the engineering and sales teams to evaluate new project feasibility. Essential Responsibilities • Draft sketches and models of parts, • Conduct dimensional and electrical inspection of sample parts, • Prepare detailed dimensional and electrical analysis reports, • Research part function, failure modes, and operating conditions, • Determine appropriate material and performance specifications based on material analyses and testing, • Develop tolerance limits based on dimensional data, manufacturing capabilities, and part function, • Prepare production drawings using ANSI/ASME Y14.5 GD&T standards, • Troubleshoot failed in-service equipment to develop repair procedures for return to service, • Provide engineering support for procurement, manufacturing, receiving, and certification of parts, • Create technical documents using FAA guidelines and regulations, • Five years of full-time relevant work experience (design, manufacturing, quality), • CAD/3D modeling design experience, • 3+ years of circuit board design, • Familiarity with aerospace specifications and processes, • Demonstrated general knowledge of drafting standards, • Proficient with SolidWorks, AutoCAD, MS Office applications, Adobe Acrobat, • Skilled in writing technical documents, • 3+ years reverse engineering is desired, • Shop time or other hands-on experience is preferred, • Experience with avionics, communications, lighting and/or electrical aircraft systems is preferred, • Understanding and familiarity with FAA standards is preferred Jet Parts Engineering, Inc. (JPE) is an equal opportunity employer. In business since 1994, JPE is an aerospace engineering firm that has established a reputation for supplying high quality parts while providing exceptional service to its customers. For more information, please see . Requirements:

Job DescriptionManufacturing Engineer Location: Hauppauge, NY Schedule: Onsite – Monday through Friday Employment Type: Permanent Compensation: $90,000 – $125,000 (based on experience) Position Overview We are seeking an experienced Manufacturing Engineer to support a growing engineering organization that is evolving into a hybrid team responsible for manufacturing methods, operations, and tooling support. This role focuses on developing detailed manufacturing documentation and driving methodized production for military mechanical and structural components in a highly regulated aerospace and defense environment. This position is best suited for a hands-on manufacturing engineer who can quickly interpret customer specifications, define robust manufacturing methods, and ensure accurate documentation is executed on the shop floor. Key Responsibilities • Review customer specifications, drawings, and technical data packages to define manufacturing methods, • Create clear, detailed operation sheets and assembly instructions to support shop-floor execution, • Perform manufacturing methodizing for mechanical parts, including routings, processes, and work instructions, • Support tooling design, including identifying tooling needs and collaborating with machinists and tool & die teams, • Interface with Quality to address nonconformances and support Requests for Variance (RFVs), • Communicate with government and customer technical representatives to clarify technical requirements, • Collaborate directly with production teams during first article and initial production runs to validate and refine methods, • Ensure manufacturing documentation is accurate, compliant, and properly released to the shop floor, • Utilize ERP systems for contract takeoff, routings, and manufacturing data management, • Support continuous improvement initiatives focused on quality, efficiency, and repeatabilityRequired Qualifications (Must Have), • Minimum 3–5+ years of manufacturing engineering experience (3 years considered if highly qualified), • Demonstrated ability to create operation sheets and assembly instructions (most critical skill), • Strong understanding of manufacturing processes for mechanical parts and assemblies, • Experience with manufacturing methodizing and shop-floor support, • ERP system experience within a manufacturing environment, • Ability to work closely with production personnel and support first production runs, • Strong attention to detail and documentation disciplinePreferred Qualifications (Nice to Have), • Aerospace and/or defense manufacturing experience (strongly preferred), • Familiarity with AS9100 and ISO 9001 quality systems, • Tooling design experience or close collaboration with tooling and machining teams, • Experience working to detailed military or aerospace customer specifications, • Continuous improvement experience in a production environmentEducation, • Bachelor’s degree in Engineering preferred, • Candidates without a degree may be considered with 10–15 years of directly relevant experienceWork Environment, • 100% onsite role located in Hauppauge, NY, • Flexible start time between 6:30 AM and 8:30 AM (manager discretion), • Privately owned manufacturing organization (~100 employees), • Collaborative culture with close interaction between engineering, quality, and production teams, • Facilities include both mechanical manufacturing and large, close‑tolerance composite structuresIdeal Candidate Profile, • A true manufacturing engineer (not repair-focused and not R&D-heavy), • Comfortable quickly getting into detailed specifications and production methods, • Aerospace and defense background with exposure to major A&D programs Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: We are seeking a Senior Formulation Scientist to join our dynamic R&D team, where you’ll play a key role in developing innovative pharmaceutical and nutraceutical products. In this hands-on role, you’ll design formulations, support process improvements, and contribute directly to product development from concept to commercialization. This position offers exposure to oral solid dosage forms. Candidates may specialize in drug formulation or nutraceutical formulation, with the opportunity to grow into broader product development responsibilities. The Sr. Scientist Formulation is primarily responsible for formulation product development and leading the process development activities from concept through commercialization. Why Join CPC? At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Development of solid dosage nutraceutical, OTC or prescription products e.g. Tablet (Immediate Release, Controlled release, Effervescent) and Capsule with a working knowledge of tableting, two-piece encapsulation, granulation, fluid bed drying, and tablet coating, • Manage multiple development projects and develop formulations in a timely manner, • ·Assist in execution of Sampling Protocols, Process Validation Protocols, Stability Protocols and reports for OTC/ANDA products as per cGMP guidelines., • Write and review challenge study protocols, master manufacturing records, product development reports and technical transfer reports, • Performing project management by coordinating the activities and keeping strong communication amongst multiple disciplines for all technical transfer projects., • Provide support to production in process improvement and troubleshooting., • Manage, coach, mentor and motivate junior scientists, operators, and technicians for exceptional performance, • BS or MS degree in Pharmaceutical Sciences or related field is required, • Experience in Pharmaceutical R&D formulation is required, • Experience with formulation equipment such as blender, fluid bed dryer, high shear granulator, tablet press and other such equipment is preferred, • Outstanding oral, written and computer skills is required, • Excellent oral and written communications skills, working knowledge of MS Office, • Knowledge of CGMPs related to US FDA Manufacturing environments., • Ability to prioritize and multitask, • Motivated, detailed, organized, • Knowledge of cGMP, computer software including word processing, Excel, and PowerPoint. Supervisory Responsibilities: • Limited Personal Protective Equipment or Attire Required for Position: • As needed

Job DescriptionDescription: Position Summary:The Inspector, QA Manufacturing has the primary responsibility of ensuring product quality is maintained through all phases of manufacturing in accordance with current good manufacturing practices. Responsibilities: Responsibilities include, but are not limited to: • Perform in-process monitoring (e.g. weight, thickness, hardness, disintegration, friability, etc.) of all manufacturing operations, • Perform duties using good documentation practices, • Collect in-process and finished product samples as required, • Support collection of microbiological samples per procedure as required, • Perform room inspections/clearances as required, • Perform Batch Record release of both Commercial and IP batch records, • Perform AQL sampling and inspections as required, • Identify and report any non-conformances/discrepancies to management if applicable, • Review general SOPs are being met by production, • Assist in employee training (initial and ongoing), • Support environmental monitoring activities (i.e. water sampling air sampling), • Provide additional QA technical support to Coating Department, • Review batch record documentation, • QMS form issuance as required to production, • Daily scale weight verification, • Maintain QA supplies, • Review and approve weekly pest control logs, • Sample transmittal to QC and Account Services, • Review grounds logbook for Maintenance, • Monthly audit of facility fire extinguishers, • High School or GED diploma required, • Ability to read, write, and communicate effectively., • Self-motivated with the ability to work in fast-paced environment and handle multiple tasks simultaneously., • Required to reach with arms and use hands and fingers to handle or feel objects and tools, • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs and ladders, • Work environment in production operations facilities include close proximity to heavy machinery with loud noises and pharmaceutical powders (dust)., • Potential to move between production operations sites/areas to complete job functions., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Gowning as required by GMPs and/or SOPs $21.50 per hour

Job DescriptionDescription: Position Summary: The Manager of Equipment Maintenance is responsible for supporting assigned production divisions to ensure equipment, documentation, plant, and support systems are repaired, maintained, up to date, and in good working order. Day and Night shift opportunities available. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Develop, execute, and manage equipment maintenance department to meet all requirements and yield a greater than 90% first time right., • Communicate daily with cross-functional department directors and managers., • Troubleshoot and resolve complex equipment issues, driving root cause analysis., • Maintain and process paperwork (internal PO and Vendors) for Accounts Payable., • Evaluate and monitor spare parts to minimize downtime. Monitor and maintain spare parts database, submit requisition for equipment and parts as needed., • Manage relationships with cross-functional teams to install, rebuild, or replace production equipment., • Manage plant maintenance support personnel., • Ensure that technical staff are adequately trained, equipped, and motivated so that technical work can be accomplished in a safe, timely, and cost-effective manner., • Review the operation of plant equipment and systems constantly to minimize unplanned downtime, anticipate and solve problems in a timely manner, and identify opportunities for improvement., • Initiate and carry out projects that improve efficiency and/or reduce operating costs., • Track, analyze and improve key maintenance parameters such as asset utilization, maintenance cost, PM compliance, schedule compliance, etc., • Interface with all equipment monitoring, CMMS, BMS and production/project management software, to plan work activities, and develop interdepartmental feedback, ensuring proper record keeping for maintenance activities., • Perform center lining and 5S work to production lines, product contact parts, and change parts., • Maintain safety, health, and environmental policies and procedures., • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect, and accountability., • High school or GED diploma required., • Bachelor’s degree in mechanical engineering, Industrial Maintenance, or related field, or equivalent experience., • Proven leadership experience, with the ability to supervise and motivate a team., • Knowledge of safety regulations, compliance standards, and risk assessment procedures., • Expert knowledge of production equipment and facility’s support systems., • Excellent problem-solving, organizational, and communication skills., • Proficiency in maintenance management software (e.g., CMMS) and Microsoft Office Suite., • Proficient with test equipment, data managing leading to databased decision making., • Strong mathematical/analytical aptitude., • Willingness to lead by example, fostering a shared culture of efficiency with importance on meeting project commitments with on-time completion., • Required to use hands to handle or feel objects, equipment, tools, computer controls and operational machinery., • May be required to lift and/or move up to 50 lbs., stand, bend, kneel, crouch, sit, talk, hear, and walk for a long period., • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Required to be present in the office to collaborate with executive management, department directors, peers, and supervisors on an as needed basis., • Regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role., • Employee travel/work hours/schedule/location and/or shift are subject to change based on business needs and Management discretion., • Regularly exposed to noise, dust and vibrations in a manufacturing environment; PPE may be required. $80,000 - $100,000 per year

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Accounting department you will be working with dedicated professionals who support and interact with all areas of the company. Our full time employees enjoy competitive benefits including: • 401(k) with generous employer match, • Health Insurance, • Dental Insurance, • Paid holidays, • Paid vacation Responsibilities: Responsibilities include but are not limited to checking the overall quality of the manufacturing and/or packaging operations. Perform all line releases, product quality checks and batch record/work order review. • Supports production activities related to the timely production of finished goods., • Performs line releases and product quality checks including batch record/work order review for QA release., • Assists in the validation/qualification of batches, including sampling., • Ensure that any required sampling is performed and samples are submitted to laboratory., • Maintain records and organize documents to support packaging/manufacturing operations in an efficient manner., • Assist when needed for any pertinent investigations involving respective areas., • Monitor warehousing and staging areas to ensure materials are being received/shipped/maintained within cGMP and SOP Guidelines., • Report building maintenance issues to ensure compliance with AIB, HACCP, cGMP regulations and pertinent SOP's and report them to the QA Supervisor., • Assist in the monitoring and maintenance of the Pest control, calibration and temperature monitoring programs., • All other duties as assigned Education and Experience: • HS Diploma, • At least one year of directly related experience. Work Environment: • In person. There is no remote option for this role. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job DescriptionSUMMARY OF POSITION: Check-Mate Industries is seeking a skilled and dependable CNC Machinist to join our manufacturing team. This role is responsible for setting up and operating CNC milling machines to produce precision components that meet strict quality and performance standards. The ideal candidate will have hands-on machining experience, strong attention to detail, and the ability to work independently in a fast-paced production environment. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following, other duties maybe assigned based on departmental needs and company goals: • Set up and operate CNC milling machines for production runs, • Load and verify programs, set tool offsets, and perform first-piece inspections, • Interpret blueprints, technical drawings, and work instructions, • Utilize precision measuring instruments, including calipers, micrometers, and height gages, • Monitor machine performance and make necessary adjustments to maintain tolerances, • Ensure consistent product quality while minimizing scrap and rework, • Maintain a clean, organized, and safe work area, • Proven ability to set up machines and run jobs independently, Haas, Makino, Doosan are a plus, • Proficient in reading blueprints and understanding tolerances, • Experience using standard inspection and measuring tools such as calipers, micrometers, gauges, indicators, optical comparators, and 3D scanning, • Strong attention to detail and commitment to quality, • Familiarity with ERP/MES systems, PLEX, IQMS are a plus, • Basic knowledge of CAD/CAM software, • Reliability and strong work ethic, • Attention to detail with a focus on efficiency, • Willingness to learn and continuously improve Powered by JazzHR iKiQtdEXiV

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description We are seeking a highly skilled and energetic Mac PrePress Guru to join our dynamic team! In this pivotal role, you will be the driving force behind preparing digital files for high-quality printing, ensuring flawless color accuracy, and optimizing prepress workflows for various manufacturing processes. Your expertise will help transform creative concepts into stunning print materials, from packaging to print advertising, with precision and efficiency. If you thrive in a fast-paced environment where technical mastery meets creative problem-solving, this is your chance to make a significant impact! Duties • Prepare and review digital artwork files for printing using Mac-based prepress software, ensuring all specifications meet production standards., • Manage color calibration and color management workflows to guarantee consistent, vibrant results across different printing platforms., • Collaborate with graphic designers to optimize layout design, typography, and image quality for print media., • Operate and troubleshoot advanced printing equipment including flexo presses and CNC machinery to ensure optimal output quality., • Conduct quality control checks throughout the production process, identifying and resolving issues related to screen printing, machining, or layout errors., • Support manufacturing teams by providing technical guidance on print advertising projects and ensuring adherence to specifications., • Proven experience with Mac-based prepress workflows and software such as Adobe Creative Suite (Photoshop, Illustrator, InDesign) as well as Kodak Prinergy, Preps, etc., • Expertise in color management systems to maintain consistency across various print runs., • In depth knowledge of offset printing, foil stamping, engraving, die cutting and all specialty finishes including bindery, etc., • Excellent attention to detail with a focus on quality control throughout all stages of prepress and production., • Effective communication skills to collaborate with cross-functional teams including designers, production staff, and quality assurance personnel. Join us as a Mac PrePress Guru and bring your technical prowess combined with creative flair to produce outstanding print materials! This role offers an exciting opportunity to work at the intersection of design, manufacturing, and technology—helping brands communicate visually with impact while ensuring top-tier quality every step of the way!

Job DescriptionDescription: Position Summary:The Inspector, QA Manufacturing has the primary responsibility of ensuring product quality is maintained through all phases of manufacturing in accordance with current good manufacturing practices. Responsibilities: Responsibilities include, but are not limited to: • Perform in-process monitoring (e.g. weight, thickness, hardness, disintegration, friability, etc.) of all manufacturing operations, • Perform duties using good documentation practices, • Collect in-process and finished product samples as required, • Support collection of microbiological samples per procedure as required, • Perform room inspections/clearances as required, • Perform Batch Record release of both Commercial and IP batch records, • Perform AQL sampling and inspections as required, • Identify and report any non-conformances/discrepancies to management if applicable, • Review general SOPs are being met by production, • Assist in employee training (initial and ongoing), • Support environmental monitoring activities (i.e. water sampling air sampling), • Provide additional QA technical support to Coating Department, • Review batch record documentation, • QMS form issuance as required to production, • Daily scale weight verification, • Maintain QA supplies, • Review and approve weekly pest control logs, • Sample transmittal to QC and Account Services, • Review grounds logbook for Maintenance, • Monthly audit of facility fire extinguishers, • High School or GED diploma required, • Ability to read, write, and communicate effectively., • Self-motivated with the ability to work in fast-paced environment and handle multiple tasks simultaneously., • Required to reach with arms and use hands and fingers to handle or feel objects and tools, • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs and ladders, • Work environment in production operations facilities include close proximity to heavy machinery with loud noises and pharmaceutical powders (dust)., • Potential to move between production operations sites/areas to complete job functions., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Gowning as required by GMPs and/or SOPs $21.50 per hour

Job DescriptionDescription: An HVAC Controls Engineer is responsible for providing hands-on controls and electrical engineering support to correct, repair, and improve HVAC equipment and systems company-wide. Requirements: Essential Job Functions: • Troubleshoot and repair PLC, VFD and control related issues, • Design and implement system changes, updates and improvements, including creating new control systems, • Draft new electrical drawings and modify existing electrical drawings, • Organize and maintain latest machine programs, BMS programs, electrical drawings, and user manuals, • Communicate and work with maintenance and engineering personnel to resolve issues in a timely manner, • Procure parts and materials required for machine and system maintenance., • Assist in initiation of change control if new parts deviate from original specifications., • Assist in qualification of equipment, • Supervise, mentor, advise technicians to ensure machine repairs and operations are conducted in a safe, responsible manner, • Execute engineering support and maintenance to meet all requirements and yield a greater than 90% first time right., • Keep current and implement technology to enhance operation performance, • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect and accountability., • Bachelor’s Degree in Electrical Engineering or equivalent hands-on experience, • Knowledge of controls software including BMS systems, • Knowledge of drafting software (AutoCAD) preferred, • Knowledge of OSHA and NEC code requirements, • Ability to follow company policies and procedures, including all SOPs, • Computer skills must include Microsoft Office, Word and Outlook, • May be required to lift up to 50 lbs, climb ladders, use tools, and manipulate machine parts., • Required to use hands to use computer controls, demonstrate equipment usage, etc., • Required to be present in-house to provide daily engineering support to multiple departments and management including VPs, directors, managers and to collaborate / mentor other personnel as required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders, • Potential to move between production operations sites/areas to complete job functions., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion, • Indoor manufacturing environment including enclosed areas with dust and loud noises., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel, • For exempt employees, casual or incidental overtime worked is not compensable. When these extra efforts are either infrequent or of short duration, it is expected that exempt Employees will consider these extra hours per day, part of their professional employee/Company relationship and extend their efforts without additional compensation. Supervisory Responsibilities: • As needed

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Job Summary The Sanitation Specialist is responsible for deep cleaning and sanitizing of food production rooms, equipment and all other rooms associated with a high and low care areas in a food manufacturing facility while following the 7 steps of sanitation to ensure optimal cleanliness. Primary Responsibilities * Deep clean and sanitize Floor, walls and food production equipment following the 7 steps of sanitization. * Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees. * Dust off packing areas of debris and other loose particles. * Wipe metal detector and tables. * Power wash floor. * Mix Various cleaning agents * Identify and report possible repairs * Other activities as assign by supervisors Requirements * High school diploma. * Prior Cleaning experience ‘’preferred’’ * Cell phone and email access.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionCompany Summary: Since 1964, we have been the world’s largest supplier of fudge making equipment, ingredients, and marketing expertise. Our products are made fresh in retail stores and sold under the retailer’s own name, making us the best-kept secret in retail confectionary. With a strong global presence and a vast network of retail partners, we are committed to delivering exceptional products, service, and long-term business growth. Our culture embodies the 'Hungry, Humble, Smart' philosophy. We value accountability, integrity, collaboration, and a positive, vibrant work environment. Job Summary: The Mix & Nut Production Supervisor is responsible for the daily execution, material accuracy, labor efficiency, food safety compliance, and team performance across Mix Production and Nut Mix operations. This role owns output, accuracy, and discipline for both dry mix and nut mix production. The Supervisor ensures production meets schedule, quality, safety, and cost targets every day. This is a highly hands-on leadership position that requires constant presence on the production floor. The Supervisor works directly with operators, assists with production activities when needed, and actively supports material handling, equipment setup, and line troubleshooting. This role is expected to lead from the floor, not from an office. Performance is measured by results, operational discipline, and the ability to keep production running efficiently and safely. Responsibilities Leadership, Team Development & Accountability • Lead, coach, and hold accountable Mix and Nut Production Leads and Operators, • Maintain a strong hands-on presence on the production floor throughout the shift, • Conduct regular 1:1s with key team members, • Set clear expectations for safety, quality, accuracy, and performance, • Enforce attendance, conduct, and performance standards, • Train employees across all mix and nut production positions, • Address performance issues immediately, • Step in and assist with production operations when staffing shortages or production demands require it Daily Mix & Nut Production Execution • Lead daily production startup and execution for mix and nut lines, • Ensure production orders are reviewed, released, and completed correctly, • Ensure all lines are staffed, supplied, and started on time, • Monitor throughput, labor utilization, and efficiency, • Intervene immediately when performance deviates from plan, • Ensure nut mix operations follow allergen and cross-contact controls, • Maintain clean, organized, and GMP-compliant work areas Material Planning, Accuracy & ERP Discipline • Plan daily raw material needs for mix and nut production, • Create and execute daily pick tickets, • Enforce FIFO and lot control 100 percent of the time, • Ensure accurate staging of ingredients for both mix and nut lines, • Assist with ingredient handling and staging when required to support production flow, • Reconcile end-of-day ingredient and nut inventory Food Safety, GMP, HACCP & SQF Compliance • Enforce GMP, HACCP, SQF, and allergen control requirements, • Ensure nut handling, segregation, and sanitation controls are followed, • Complete CCP documentation accurately and on time, • Verify metal detector, weight, and pallet checks, • Ensure lot and case code accuracy, • Maintain audit-ready conditions at all times KPI Ownership & Performance Management KPIs: • Daily mix and nut output vs plan, • Labor efficiency, • Material and nut inventory accuracy, • ERP accuracy, • FIFO compliance, • Allergen compliance, • Track and review KPIs daily, • Communicate results and expectations to the production team, • Identify performance gaps and corrective actions Continuous Improvement & Problem Solving • Identify inefficiencies, waste, and production bottlenecks, • Improve changeovers, material flow, and labor utilization, • Partner with Maintenance on equipment reliability and downtime reduction Physical Requirements This role requires regular physical activity in a manufacturing environment. The Mix & Nut Production Supervisor must be able to: • Lift, carry, and move materials up to 50 pounds regularly, • Assist operators with ingredient handling, bag loading, and material staging when needed, • Stand and walk for extended periods during production shifts, • Work in a fast-paced manufacturing environment with dust, noise, and temperature variation Qualifications Required: • High School Diploma or equivalent, • 3–5 years food manufacturing experience, • 2+ years lead or supervisory experience, • ERP manufacturing experience, • GMP and HACCP knowledge Preferred: • SQF experience, • Forklift certification Core Skills: • Strong leadership, coaching, and team-building skills, • Hands-on operational problem-solving, • Ability to manage multiple priorities under tight deadlines, • Excellent communication and follow-through Benefits Include: • Paid Time Off Plan and Paid Holidays, • Medical, Dental & Vision Insurance, • Company Paid Long Term Disability Insurance, • Flexible Spending Accounts (FSA), • 401(k) Plan, • Life/AD&D Insurance, • Employee Assistance Program, • Length of Service Awards What Makes Calico Different: • Ice Cream Fridays during fair weather months, • On-Site Gym with free fitness classes and personal training, • Flu Shot Clinic held annually on-site, • Birthday & Holiday Celebrations held to foster fun and team interaction, • Employee Appreciation Events with great food, fun and team building for all team members and their families, • Charity Drives held throughout the year to give all Calico team members an opportunity to support our local community, • Employee Referral Program financially rewards employees for referring qualified new hires to Calico Job Type: Full Time Schedule: Tuesday - Friday 7:00 AM - 6:00 PM Work Location: Amityville, NY Salary Range: $60,000 - $62,000 Annually Calico Cottage Confections, LLC. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description If you know the sound of a spindle, the smell of cutting oil, and the satisfaction of fixing a machine that others cannot, you will fit right in at Schivo Medical. We keep the world’s most advanced CNC machining and precision manufacturing equipment running at peak performance. Our teams work with 5-axis mills, Swiss machines, EDM, lasers, and other high-end systems that produce critical components for medical and life science customers. We partner directly with leading OEMs and service providers, so every repair, calibration, and upgrade keep production moving and customers confident. Schivo is growing fast, with opportunities to build your skills across different technologies and move up or across into new roles. We are a team that values problem-solvers who can roll up their sleeves, think on their feet, and keep complex machines humming. Shift hours:4pm to 1:30am CNC Machine Operator Position Overview: Operate CNC Machine Operator and inspect finished parts. Essential Duties and Responsibilities: • Verify components are produced to print (dimensional and visual inspection), • Change tools., • Make offsets., • Load material and remove scrap., • Fill out various paperwork., • Simultaneous operation of multiple machines, • Minor troubleshooting, • 2/4 years’ experience with lathe/mill turning machines., • Experience using the Fanuc control preferred., • Must have the ability to read and interpret engineering drawings and blueprints (GD&T symbols)., • Working knowledge of various materials & tools (inserts, endmills, drills Etc.), • Ability to work independently with minimal supervision., • Good communication skills and positive can-do attitude, • Must be dependable and possess a willingness to learn new techniques., • mechanically inclined, • 401(k), • Dental insurance, • Health insurance, • Vision Insurance, • Generous Paid time off, • Life Insurance, • Short/Long disability, • Employee referral program, • EAP program, • Employee discounts, • Summer and holiday events Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. "No sponsorship to work in the United States"

Job Description Overview We are seeking a Manufacturing Engineer to support production operations for high-precision aerospace components. This role will focus on improving manufacturing processes, driving efficiency, and ensuring products meet strict aerospace quality and regulatory standards. Key Responsibilities • Develop, implement, and improve manufacturing processes for aerospace components and assemblies, • Drive continuous improvement initiatives focused on cost, quality, and production efficiency, • Create and maintain work instructions, process documentation, and standard operating procedures, • Collaborate with design engineering to ensure manufacturability (DFM/DFA), • Support new product introductions (NPI) from concept through full-scale production, • Troubleshoot production issues and implement corrective actions, • Work closely with quality teams to meet AS9100 and customer compliance requirements, • Identify and implement tooling, fixturing, and automation solutions, • Analyze production data and recommend process improvements Qualifications, • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or related field, • 3-7+ years of manufacturing engineering experience (aerospace preferred), • Experience in machining, assembly, or fabrication environments, • Familiarity with lean manufacturing, Six Sigma, or continuous improvement methodologies, • Knowledge of GD&T and engineering drawings, • Experience working within AS9100 or similar regulated environments, • Strong problem-solving and cross-functional communication skills Pay Details: $90,000.00 to $130,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

MOSCOT is a 111-year-old New York City institution renowned worldwide for its iconic eyewear – The MOSCOT Originals. MOSCOT infuses its unmistakably refined, downtown aesthetic with over 100 years of eyewear expertise and unparalleled craftsmanship to create its timeless eyewear. While now recognized as a global fashion brand, MOSCOT remains a neighborhood optical shop. Job Description The Lab Operations Manager is responsible for the flow of Retail and Ecommerce orders. In partnership with the N.A. Lab Manager, this role is responsible for successfully leading lab teams to meet quality and service levels. Areas of responsibility include, but are not limited to, Inventory Control, Logistics, Lab Order Management, Internal & External Communication, and Customer Service. The lab coordinators will report to the Lab Operations Manager. The omni-channel lab coordinators will process all retail and MOSCOT.COM orders for the surface and finishing lab. Tasks & Responsibilities Lab Operations • Maintain the organization and timely execution of surface and finishing orders for all dependent sales channels, • Confirm that orders are prepared daily – correct color work tray, frame & lens selection, and by promise date, • Assist in the management and organization of lab supplies., • Collaborate with warehouse operations team on all orders processed in SAP, • Collaborate with logistics team on daily deliveries to shops and customers., • Confirm all work trays for all orders are prepared for lab technicians, • Partner with NA Lab Manager on flow and delivery of surface lens orders, • Partner with NA Lab Manager and cross train on technical management tasks. Communication • Responsible for timely updates to order status of lab tickets in all systems., • Provide communication to Shop Managers and team regarding any exceptions to orders., • Facilitate communication with warehouse operations team, • Streamline communication in Lab environment and collaborate with Lab Technicians on timely execution of orders Customer Service • Communicate any delays/updates to sales teams, • Collaborate with warehouse operations teams, • Assist Shop Managers/Opticians with urgent requests/exceptions, • Provide the MX to all internal and external customers Team Leadership & Development • Lead and support lab supervisors, technicians, and support staff, • Establish performance expectations and conduct regular evaluations, • Build a culture of accountability, quality, and continuous improvement, • Manage time and attendance Qualifications • High school diploma required; associate or bachelor’s degree preferred (Operations, Business, or related field), • 3+ years of experience in an optical lab or manufacturing environment, • 2–3+ years in a supervisory or management role, • Strong understanding of optical lab processes and production workflows, • Bi-lingual Spanish speaking. Location: Farmingdale, NY Hours: On-site full-time position M-F 8a-4p Base Salary: Starting at $55,000 annually Benefits: Healthcare benefits - medical and dental insurance 2 Free MOSCOT Frames per year Retirement plan with employer match

Job Description InProduction is the leading provider of temporary seating, staging, structures, and scenic production for the U.S. live events industry. The Company is a valuable partner to event organizers throughout the entire venue transformation process, with core services including design and fabrication, delivery and installation, on-site execution, and tear down. These services span a variety of end verticals including golf, motorsports, music festivals, other sports & entertainment, and corporate events. InProduction maintains a total commitment to excellence for an exceptional outcome at every event. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page InProduction is looking for talented individuals to join our company to help create and design solutions for high profile nationwide events. The ideal candidate would be able to provide accurate drawings for our sales staff using our drawing library of parts. These drawings would be provided to our customers, building officials and our technicians in the field. The preference would be for candidates that are willing and able to grow with our company as we are experiencing tremendous growth within the industry. Duties and Responsibilities • Collaborate with other team members to achieve functional design solutions against various constraints, • Participate in design reviews and capable of working with site surveys, • Produce code compliant drawings and specifications, • Maintain schedules for each project deadline to ensure that project deadlines are maintained and met, • Responsible for reviewing and verifying drawings in various design modeling software formats Education and experience: • Minimum of 4 years of professional experience using AutoCAD required, • Associate’s degree or AutoCAD certification preferred, • This job requires you to report to office, • Must have a strong AutoCAD foundation & proficient in creating detailed drawings, • Working knowledge of dynamic blocks and corresponding ability to create/expand upon existing library, • Working knowledge of 3D and programs such as 3DS Max preferred, • Work in a dynamic, driven, & collaborative environment, • Proficiency in PC based computing, Microsoft Office, and use of Windows OS Adobe Creative Suite, • The position requires a background check and drug screening Compensation: $22-26 per hour (based on experience). Benefits • Health, Dental, and Vision Insurance, • Life Insurance, • Education Benefits, • Paid Vacation, • Floating Holidays, • Paid Holidays

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off As a Materials Purchaser and Logistics Manager, you will be responsible for sourcing, purchasing, and managing the inventory of materials required for our fabrication projects. Your role will be crucial in ensuring the timely and cost-effective acquisition of high-quality materials to meet production schedules and maintain our standards of excellence. You will be responsible for overseeing the packing of goods and scheduling of all logistics related booking so products will be delivered on time and budget. Key Responsibilities: • Material Sourcing and Procurement:, • Identify and evaluate potential suppliers for materials such as MDF, acrylic, plywood and laminates., • Sourcing of custom/bespoke items effectively and in a timely manner., • Negotiate contracts, pricing, and terms with suppliers to secure the best deals., • Develop and maintain strong relationships with key suppliers to ensure a reliable supply chain., • Inventory Management:, • Monitor and manage inventory levels to ensure materials are available when needed without overstocking., • Conduct regular inventory audits and reconcile discrepancies., • Implement inventory control procedures to optimize storage and reduce waste., • Quality Assurance:, • Ensure all materials purchased meet the company's quality standards and specifications., • Collaborate with the production team to address any material-related issues or concerns., • Conduct supplier evaluations and audits to ensure compliance with quality and delivery standards., • Cost Management:, • Develop and manage the procurement budget, tracking expenses and identifying cost-saving opportunities., • Analyze market trends and pricing to make informed purchasing decisions., • Documentation and Compliance:, • Issue POs and ensure supplier compliance., • Maintain accurate records of purchase orders, contracts, and supplier agreements., • Ensure compliance with company policies, industry regulations, and ethical standards in all procurement activities., • Collaboration and Communication:, • Work closely with the production, design, and project management teams to understand material requirements and project timelines., • Provide regular updates on material availability, delivery schedules, and flag potential delays early., • Logistics:, • Supervise and coordinate the packing of goods to ensure they are correctly and adequately protected, • Ensure goods are packed appropriately and according to schedule, • Manage goods in, goods out, and materials inventory, • Ensure smooth operations and timely deliveries, • Maintain a clean and organized work environment in the logistics areaQualifications:, • Minimum of 3 years of experience in procurement, purchasing, or supply chain management, preferably in the manufacturing or wood industry., • Strong negotiation, analytical, and problem-solving skills., • Excellent organizational and time management abilities., • Proficiency in procurement software and Microsoft Office Suite., • Knowledge of materials used in fabrication (MDF, acrylic, plywood, laminates, fabrics, etc) is a plus., • Strong communication and interpersonal skills., • Previous experience in logistics management or a similar role, • Excellent communication and leadership abilities, • Ability to work in a fast-paced environment and handle multiple tasks simultaneously, • Knowledge of packing techniques and materials handling, • Familiarity with inventory management systemsWhat We Offer:, • Competitive salary and benefits package., • Opportunities for professional growth and development., • A collaborative and innovative work environment.

Job DescriptionSUMMARY OF POSITION: Check-Mate Industries is seeking an experienced Quality Manager to lead and elevate our quality systems in a high-volume manufacturing environment. This role is responsible for driving consistency, strengthening process control, and ensuring our quality infrastructure supports operational excellence as the business scales. The Quality Manager will work cross-functionally to improve performance, build accountability, and position quality as a competitive advantage. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following, other duties maybe assigned based on departmental needs and company goals: Quality Performance • Drive measurable improvement in key metrics, including scrap, rework, customer quality performance, and cost of poor quality, • Establish clear visibility, ownership, and accountability for quality KPIs across the organization Process Control & Continuous Improvement, • Strengthen process control and inspection discipline across operations, • Improve consistency across shifts, machines, and product lines, • Leverage data, including SPC and trend analysis, to drive informed decision-making Corrective Action & Issue Resolution, • Lead structured root cause analysis and corrective action processes (CAPA), • Ensure timely resolution of quality issues and validate long-term effectiveness, • Identify trends and proactively drive continuous improvement initiatives Quality Management System (QMS), • Maintain and continuously improve the ISO 9001 Quality Management System, • Support certification efforts and readiness for ISO 13485, as applicable, • Ensure procedures are practical, followed, and aligned with operational needs Supplier Quality, • Strengthen incoming inspection and supplier quality processes, • Support supplier performance monitoring and continuous improvement efforts Team Leadership, • Lead, coach, and develop quality engineers, technicians, and inspectors, • Foster a culture of accountability, responsiveness, and continuous improvement, • Associate degree in Engineering, Manufacturing, Quality, or a related technical field required; Bachelor’s degree preferred supplemented with 7–10+ years of experience in manufacturing quality, with increasing responsibility; 3–5+ years of leadership experience in a production environmentKNOWLEDGE, SKILLS AND ABILITIES:, • Experience with ISO 9001 required; ISO 13485 experience preferred, • ERP system experience (PLEX preferred), • Strong expertise in:, • PFMEA, Control Plans, PPAP/FAI, • Root cause analysis and CAPA methodologies, • SPC and process capability analysis, • Hands-on and highly visible on the shop floor, • Data-driven and results-oriented, • Clear, consistent, and accountable in leadership approach Powered by JazzHR XVX91rUrEL

Job Description Schivo Medical is a contract manufacturer on Long Island. We produce machined parts such medical devices, surgical tools, and firearms. We are hiring a parts checker who will assist the CNC Operators visual check finished parts before being shipped to our valued customers. Come work in an environmentally clean facility with great team players that support and guide you through your daily work schedules. We are a company that is committed to helping you build a fulfilling and rewarding career. Planner Overview: Reporting directly to the Supply Chain Director, this role will be responsible for the cost-effective management and supply of assigned materials and components across a global supply base, while ensuring the availability of materials in line with planned requirements. This role will work closely with Production, Planning, Warehouse, Engineering, QA, and QC. Essential Duties and Responsibilities: • Proven track record in interpreting customer demand and production schedules in complex volume manufacturing environments, from single piece parts to multi-level assemblies, • Must be detail orientated with the ability to prioritize and organize tasks to deliver business objectives within a challenging environment., • Have a proven ability to respond well to change and maintain flexibility while focusing on key objectives., • Must be able to work on their own initiative with strong problem solving and decision-making abilities, while also working as part of a multi-function team, • Managing, analyzing, and actioning customer forecast data, • Managing supply of materials into the plant while ensuring a high standard of customer service and without disruption to the production plan, • Creating purchase orders within ERP system and ensuring these are kept up to date to allow for accuracy of information flow to Production and Planning, • Continual communication with internal customers to ensure daily material availability for operational areas of the business., • Highlight any major external supply issues in a timely manner to ensure focus on resolution within the Supply Chain team., • Identify and drive cost reductions on a continual basis., • Support and manage supply chain KPIs., • Ensuring all quality and GMP standards are met., • To perform additional team tasks as required to support the effective running of the business. Necessary Education, Skills, and Competencies (including licensing and certifications): • Qualified to a minimum degree level or equivalent work experience., • At least 3 years’ relevant experience in a volume manufacturing environment, preferably in a medical device or highly regulated manufacturing environment, • Must have ERP systems experience with SAP, or equivalent ERP system., • Must be highly computer literate in Excel and Microsoft office packages., • 401(k), • 401K Match, • Dental insurance, • Health insurance, • Vision Insurance, • Generous Paid time off, • EAP Program, • Life Insurance, • Pet insurance, • Employee referral program Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bG0xIH5Pqj

Job Description Are you looking for a career that challenges you and gives you the opportunity to learn and grow every day? Oliver Inc. is hiring! Our growing Company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs! With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc. offers speed, consistency and nimbleness as a one-stop solution for all of your printing & packaging needs. At Oliver Inc, our core values are part of the framework of our organization. We're passionate and enjoy our work! We value respect and focus on servicing our customers' needs by providing them with creative solutions that help build their brands. We are currently seeking an experienced Die Cutting Operator to join our team. The ideal candidate has a background in printing or packaging and experience operating die cutting equipment. This role is responsible for setting up, adjusting, monitoring, and operating die cutting machinery; completing make-readies; pulling samples; verifying accuracy; and ensuring the highest level of product quality throughout the run. If you want to join a people-centered company with a strong team culture, we encourage you to apply. SHIFTS - 2nd or 3rd Shifts About the Role As our Die Cutting Operator, you will: • Adjusts and operates die cutting machine preparing all processes required (ex. Stripping, blanking)., • Maintains and performs minor repairs on equipment., • Ensures total quality of the job while in operation., • Works in a fast-paced environment and demonstrates teamwork spirit., • Performs preventative maintenance and minor repairs on equipment. :** You're a fit for the role of Die Cutting Operator, if your background includes: • Previous experience as a Die Cutting Operator or Die Cutting Pressman in the printing, packaging, or folding carton industry., • Hands-on experience with steel rule dies, counter plates, make-ready materials, and stripping/blanking tools., • Strong understanding of paperboard substrates (SBS, CCNB, Kraft, etc.) and how they affect cutting, scoring, and creasing., • Ability to read and interpret job tickets, CAD layouts, die lines, and quality specifications., • Proven ability to complete accurate make-readies with minimal supervision., • Mechanical aptitude and strong troubleshooting skills with die cutting equipment., • Familiarity with Bobst, Heidelberg, or similar equipment (preferred)., • Solid math skills and ability to measure tight tolerances., • Excellent attention to detail and quality standards., • Ability to lift 50+ lbs, stand for long periods, and work in a manufacturing environment. Competitive Pay + Overtime Opportunities * Full Benefits: Medical, Dental, Vision * 401(k) with Company Match * Paid Time Off & Holidays * Stable, Growing Company with long-term career opportunities * Modern Equipment & Clean Facility * Supportive, Team-Oriented Culture Oliver Inc is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws.

Job Description Are you looking for a career that challenges you and gives you the opportunity to learn and grow every day? Oliver Inc. is hiring! Our growing Company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs! With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc. offers speed, consistency and nimbleness as a one-stop solution for all of your printing & packaging needs. At Oliver Inc, our core values are part of the framework of our organization. We're passionate and enjoy our work! We value respect and focus on servicing our customers' needs by providing them with creative solutions that help build their brands. When you partner with Oliver, you partner with success. We are currently seeking an experienced Die Cutting Operator to join our team. The ideal candidate has a background in printing or packaging and experience operating die cutting equipment. This role is responsible for setting up, adjusting, monitoring, and operating die cutting machinery; completing make-readies; pulling samples; verifying accuracy; and ensuring the highest level of product quality throughout the run. If you want to join a people-centered company with a strong team culture, we encourage you to apply. SHIFTS - 2nd or 3rd Shifts About the Role As our Die Cutting Operator, you will: • Adjusts and operates die cutting machine preparing all processes required (ex. Stripping, blanking)., • Maintains and performs minor repairs on equipment., • Ensures total quality of the job while in operation., • Works in a fast-paced environment and demonstrates teamwork spirit., • Performs preventative maintenance and minor repairs on equipment. You're a fit for the role of Die Cutting Operator, if your background includes: • Previous experience as a Die Cutting Operator or Die Cutting Pressman in the printing, packaging, or folding carton industry., • Hands-on experience with steel rule dies, counter plates, make-ready materials, and stripping/blanking tools., • Strong understanding of paperboard substrates (SBS, CCNB, Kraft, etc.) and how they affect cutting, scoring, and creasing., • Ability to read and interpret job tickets, CAD layouts, die lines, and quality specifications., • Proven ability to complete accurate make-readies with minimal supervision., • Mechanical aptitude and strong troubleshooting skills with die cutting equipment., • Familiarity with Bobst, Heidelberg, or similar equipment (preferred)., • Solid math skills and ability to measure tight tolerances., • Excellent attention to detail and quality standards., • Ability to lift 50+ lbs, stand for long periods, and work in a manufacturing environment., • Competitive pay and a full benefits package, • Monthly Employee Appreciation Days, • A culture that values growth, teamwork, and continuous improvement All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job DescriptionDescription: Cox & Company solves the aerospace industry's most challenging ice protection and temperature control problems. For over 80 years Cox has worked with OEMs, Tier 1 and Tier 2 Suppliers, as well as all major modification and finishing centers throughout the world. From initial design concepts through aircraft integration and operation, our company provides the highest quality full-lifecycle support to our customers. Cox & Company, Inc. is looking for an outgoing individual who will specialize in the manufacturing precision of using composite material in the Autoclave Area. Requirements: • Perform vacuum bagging and related processes for fabrication and curing composite parts., • Clean and smooth molds, cores, and core boxes, and repair surface imperfections., • Assemble cores into lower sections of molds, to create mold assembly per work instructions., • Clean and maintain work area to ensure safe and efficient work environment., • De-molding cured parts, • Ensure compliance with company policies and safety regulations, • Document materials utilized in creating parts for traceability purposes., • Work to meet production goals and deadlines, • General knowledge of practices and procedures used to fabricate composite parts or similar is preferred., • Ability to read and correctly interpret instructions in English is a must., • Ability to use measuring instruments., • Ability to lift rolls of material., • Ability to use a computer, • 401K, • Flex Scheduling, • Health, Dental and Vision, • Health Saving Account, • Life Insurance, • Disability Benefits, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: JOB TITLE: Machinist Job Summary: We are seeking a skilled and experienced Machinist to join our team. The ideal candidate will have a minimum of 3 years of experience and be proficient in operating manual lathes, milling machines, and performing cylindrical grinding. This role requires a high level of precision and attention to detail to support our production and manufacturing operations. Key Responsibilities: · Operate and maintain manual lathes and milling machines to fabricate, modify, or repair parts and components. · Perform cylindrical grinding to achieve precise dimensions and surface finishes. · Interpret and work from technical drawings, blueprints, and specifications. · Measure and inspect parts using precision measuring tools to ensure adherence to required tolerances. · Perform routine maintenance on machining equipment. · Adhere to safety protocols and maintain a clean and organized work environment. · Collaborate with other team members to optimize workflow and ensure timely completion of projects. Qualifications: · Minimum of 3 years of hands-on experience as a machinist. · Proficiency in operating manual lathes and milling machines. · Demonstrated expertise in cylindrical grinding techniques. · Strong ability to read and interpret blueprints and technical drawings. · Familiarity with precision measuring instruments such as calipers, micrometers, and gauges. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team. · Experience in a manufacturing or production environment. · Knowledge of machining a variety of materials, including metals and composites. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description JSG is seeking a motivated Mechanical Assembler to play a vital role in assembling high-reliability mechanical components and subassemblies used in cutting-edge applications. This is a 1st shift position for our client located in Hauppauge NY Pay $21 to $23/hour Required Skills • 2 to 3 years of hands-on mechanical assembly experience in a manufacturing setting, • Ability to interpret and follow blueprints, technical drawings, and work instructions, • Proficiency with hand tools, fixtures, and basic measuring equipment, • Strong attention to detail and commitment to product quality, • Experience in aerospace, electronics, or medical device manufacturing, • Familiarity with troubleshooting and performing minor rework, • Must be a US Citizen and able to provide documentation for I-9 verification, • Successful completion of background checks and pre-employment drug screening, • Flexibility to work occasional overtime, with hours typically around 8 am to 5 pm, Monday through Friday Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D400 Company DescriptionJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. \r\n\r\nJSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. \r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description Food Safety & QA Technician - Food Manufacturing The FSQA Technician is responsible for meeting all the Safe Quality Food Standards including quality, food safety and aesthetics of the product. The Food Safety & QA technicians follow through on set processes and ensure adherence to good manufacturing practices (GMP), food safety, BRC standards and product quality standards. Duties and responsibilities • Collect swab results, • Enter results into data base, • Review results to ensure compliance with specifications, • Provide feedback to operators and manufacturing mangers regarding non-conforming products and packaging, • Communicate results according to established communication methods, • Ensure that assigned area is clean at all times following established cleaning and sanitation practices, • Informs Quality and Production Manager of any food safety problems, • Adhere to all Standard Operating Procedures and job instructions, • Take corrective actions when measures are out of specification, • Take and document required process, quality measures, • Meet or exceed established targets, • Adhere to the company’s Good Manufacturing Practices (GMPs) and the general food safety standards of BRC, • Responsible for routine cleaning and general maintenance of the workspace as assigned., • Responsible to verify all product produced by Tandem Foods is into customer specification., • Responsible to verify production process meet company and customer standards. (Brix, Moisture, etc.), • Perform other related duties as assigned, alerting team leaders and managers of idle time. Qualifications • 2-3 years of production team experience is preferred, • Must have a High School degree/GED or equivalent education, • Bilingual in English & Spanish preferred, • Strong verbal communication skills, • Mathematical aptitude, • Physical dexterity, • Ability to regularly use ladders and stairs This role is located in the Commack Industrial Park in Commack, NY 11725 Company DescriptionWe're excited to announce that TruFood Manufacturing and Bar Bakers have united as Tandem Foods! This milestone marks the evolution of two trusted names in better-for-you snacks into an industry-leading partnership. Our new brand identity, symbolized by the tandem bicycle, represents our commitment to collaboration and shared success with our valued customers. With eight manufacturing facilities nationwide and expanded capabilities in bars, chocolate molding, cookies, wafers, and granola, we're better positioned than ever to serve the growing better-for-you snack market. "Powered by Collaboration" isn't just our tagline—it's our promise to continue delivering exceptional results through innovation, trust, and partnership.We're excited to announce that TruFood Manufacturing and Bar Bakers have united as Tandem Foods! This milestone marks the evolution of two trusted names in better-for-you snacks into an industry-leading partnership. Our new brand identity, symbolized by the tandem bicycle, represents our commitment to collaboration and shared success with our valued customers.\r\n\r\nWith eight manufacturing facilities nationwide and expanded capabilities in bars, chocolate molding, cookies, wafers, and granola, we're better positioned than ever to serve the growing better-for-you snack market.\r\n\r\n"Powered by Collaboration" isn't just our tagline—it's our promise to continue delivering exceptional results through innovation, trust, and partnership.

Job DescriptionDescription: About Central Semiconductor Central Semiconductor LLC, an AEM company, is a leading manufacturer of high-quality discrete semiconductor solutions, including surface mount and bare die devices. With a strong reputation for innovation and reliability, Central serves a broad range of industries requiring both advanced technology and continued support for legacy systems. Headquartered in Hauppauge, NY, and founded in 1974, Central maintains its position as a trusted partner by delivering tailored semiconductor solutions for today’s most demanding applications. Position Summary As a Plating Technician, you will be responsible for applying metal coatings to various substrates through electroplating processes. You will ensure high-quality finishes while adhering to safety standards and environmental regulations. Key Positions Responsibilities and Accountabilities • Set up and operate electroplating equipment according to specifications., • Prepare surfaces for plating by cleaning, polishing, and masking as required., • Monitor plating processes, adjusting parameters to ensure quality and efficiency., • Conduct inspections of plated parts for quality assurance, identifying defects and inconsistencies., • Maintain proper chemical balances and perform regular maintenance on plating baths., • Document production processes and maintain accurate records of work performed., • Follow all safety protocols and regulations to ensure a safe working environment., • Collaborate with team members and provide support in troubleshooting issues. Benefits of working with our team: • This role is full-time, non-exempt, • Based in Hauppauge, NY this is an onsite role, • We offer competitive pay based on knowledge, skills, and relevant experience AEM, headquartered in San Diego, California, (change based on company & location) is a portfolio company of Industrial Growth Partners (IGP), a private equity firm focused exclusively on middle-market industrial manufacturing and niche services businesses. Through its industry leading brands AEM, Renaissance Electronics, and Central Semiconductor, AEM serves niche applications across a diverse array of attractive markets including satellite, aerospace, defense, industrial, medical, EV/Battery, and telecom. Requirements: Education and/or Experience Requirements: High School Diploma or equivalent Preferred · Technical training in electroplating or a related field · Previous experience in electroplating, metal finishing, or a similar role · Strong understanding of electroplating processes and related chemistry · Familiarity with safety protocols and environmental regulations in a manufacturing setting · Attention to detail and strong problem-solving skills · Ability to work independently and as part of a team · Good communication skills and the ability to follow detailed instructions

Job Description Location: Farmingdale, NY Company: Superior Motion Controls Position Summary: Superior Motion Controls is seeking individuals who want to join our precision-driven manufacturing team as CNC Operator and Machinist-in-Training. This opportunity is ideal for a motivated individual who thrives in a fast-paced, quality-focused environment and brings a keen desire to contribute immediately while learning critical skills that will lead to excellent pay and career advancement in a industry critical to America’s defense and aerospace capability 40+ hours per week Primary Responsibilities: • Work closely with experienced Set up Machinists and operate various CNC machining centers to produce precision components per engineering specifications and drawings., • On the job training to enhance skills for reading and interpret complex blueprints, GD&T specifications, and setup sheets., • Learn to perform in-process inspections and finished parts inspections., • Learn to select appropriate tools, fixtures, speeds, and feeds to optimize productivity and part quality., • Learn and execute routine maintenance and troubleshooting of equipment to ensure optimal machine performance., • Maintain documentation and records for production runs, tool usage, and machine setup parameters., • Collaborate with engineering, quality assurance, and production teams to improve machining processes and resolve technical challenges. Qualifications and Experience: • Minimum 2 years of recent hands-on experience in a CNC machining environment, with demonstrated experience in operating., • Experience in the use of precision measurement instruments including micrometers, calipers, height gauges, and dial indicators., • Understanding of material properties (e.g., aluminum, stainless steel, tool steel) and cutting tool technology., • Ability to work independently with minimal oversight while consistently delivering high-quality results., • Ability to stand at a machining workstation for extended periods., • Capability to lift up to 40 lbs as needed., • Must be physically able to navigate the warehouse and access inventory at various heights.

Job DescriptionProduct Support Coordinator Senior Full-time Hauppauge, NY, US Exclusive confidential search — details shared with qualified applicants. Become a Key Player as a Product Support Coordinator Senior You will support timely and compliant movement of materials and products across the operation, helping the team meet production and delivery commitments. You will work onsite in a warehouse/manufacturing environment in an operations role interacting with carriers, production teams, and inventory stakeholders. The schedule is Monday–Friday, 7:00 AM – 3:30 PM (first shift). Here’s How You’ll Make an Impact on the Team • Coordinate shipping, receiving, and material handling activities to ensure on-time delivery and accurate transfers, • Prepare and package materials for shipment in accordance with specifications and regulatory requirements, • Generate and manage shipping documentation (air bills, bills of lading, labels) and coordinate carrier scheduling and tracking, • Receive incoming materials, verify accuracy against documentation, and perform inventory control and cycle counts, • Maintain accurate records in ERP/MRP systems and interpret work instructions, travelers, and specifications, • Troubleshoot logistical or material discrepancies and coordinate resolutions while maintaining compliance with safety and regulatory standardsHere’s What You’ll Need to Be Successful in This Role, • Minimum 3+ years of experience in product support, logistics, shipping, or a related field, • Strong background in shipping and logistics operations, especially within regulated environments (e.g., aerospace, defense, manufacturing), • Proficiency with computer systems such as ERP/MRP, • Ability to read and interpret documentation, specifications, and work instructions, • Strong troubleshooting, problem-solving, and attention to detail, • Ability to lift up to 50 lbs and perform physical tasks as needed, • Strong communication and teamwork skillsHere’s What Else Might Help You Out, • Experience with government logistics systems (e.g., WAWF or other government portals), • Prior military experience, • Forklift certification Apply with Pioneers here

Job Description Immediate opening is available for full-time Mechanical Inspectors, 1st Class and 2nd Class for Production and Final Quality Inspection in Farmingdale. NY. Responsibilities include monitoring, measuring, and documenting the characteristics of products as compared to product requirements and prevent non-conforming product. This position will work with machined and fabricated metal products at various stages in our manufacturing processes including final Quality Inspection. We are seeking individuals with excellent interpersonal skills and operational expertise to join our production team. Essential Duties and Responsibilities include the following: • Monitor and measure the characteristics of products at appropriate stages of product realization., • Document and analyze the conformity of product to required specifications, • Cooperate with manufacturing to prevent non-conforming product and continuously improve processes. Supervisory Responsibilities: This job has no supervisory responsibilities. Balances team and individual responsibilities; Gives and welcomes feedback; Puts success of team above own interests. • Written Communication - Excellent command of the written English language; Writes clearly and informatively; Varies writing style to meet needs; comprehends and applies proper email etiquette; presents numerical data effectively; able to read and interpret complex written information (customer specification manuals, contracts, etc)., • Problem Solving -- identifies and resolves problems in a timely manner; gathers and analyzes information and data skillfully; develops alternative solutions; works well in group problem solving situations. Requirements Education and/or Experience: A high school diploma or equivalent. The preferred candidate will have: • Experience with Measuring and Testing Equipment including CMM equipment., • Ability to read and interpret part drawings, product specifications, and other related documentation. Must understand Geometric Dimensioning and Tolerances (GD&T) to product inspection Qualifications / Requirements: • Must be a detail-oriented, communicator, able to prioritize tasks and able to work under pressure with multiple deadlines., • Must be able to use all standard measuring instruments and CMM equipment., • While performing the duties of this Job, the employee is regularly required to sit; use hands to type, handle and feel. Employees must be able to communicate effectively through talking and listening. The employee is occasionally required to stand; walk, and reach, lift and carry objects weighing up to 25 lbs with hands and arms.

Job DescriptionOverview We are looking for a Mechanical Engineer to support the design, development, and testing of aerospace components and systems. This role will play a key part in product development, ensuring designs meet performance, safety, and regulatory requirements. Key Responsibilities • Design and develop mechanical components and assemblies for aerospace applications, • Create 3D models, drawings, and documentation using CAD software (SolidWorks, CATIA, etc.), • Perform engineering analysis including stress, thermal, and vibration evaluations, • Support prototyping, testing, and validation of new designs, • Collaborate with manufacturing to ensure designs are production-ready, • Participate in design reviews and technical discussions, • Ensure compliance with aerospace standards and specifications, • Investigate and resolve design-related issues during development and production phases, • Support continuous improvement of existing products and systemsQualifications, • Bachelor's degree in Mechanical Engineering or related field, • 3-7+ years of mechanical design experience (aerospace preferred), • Proficiency with CAD tools (SolidWorks, CATIA, NX, etc.), • Knowledge of materials, mechanics, and design principles, • Experience with GD&T and engineering drawings, • Familiarity with aerospace standards (AS9100, FAA, etc.) is a plus, • Strong analytical and problem-solving skills, • Ability to work cross-functionally with manufacturing, quality, and project teamsPay Details: $90,000.00 to $130,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionHiring for Diesel Engine Mechanic in Commack, NY paying up to $45 per hour Job Description This position seeks an experienced Diesel Engine Mechanic with at least 5 years of hands-on experience performing diesel engine replacements and repairs. You will work in a fast-paced body shop environment focused on buses, carrying out engine removals, diagnostics, and repairs with speed, accuracy, and high-quality workmanship while following established safety and shop procedures. Responsibilities • Perform diesel engine removals and replacements on buses with a high level of accuracy and craftsmanship., • Diagnose mechanical issues on diesel engines and related systems and complete necessary repairs with minimal supervision., • Execute all assigned work in a timely and efficient manner while maintaining high-quality standards., • Follow all safety protocols, shop rules, and company procedures at all times., • Inspect engines and components after installation or repair to ensure proper functionality and reliability., • Use power tools, body shop tools, and other equipment safely and effectively to support engine and related repairs., • Collaborate with shop leadership and other technicians to meet production and turnaround goals., • Support related repair activities such as general mechanical repair, collision-related mechanical work, metal fabrication, and welding when required., • Maintain a clean, organized, and safe work area, including proper care and storage of tools and equipment. Join a professional, high-volume shop where your technical expertise is valued and your work directly supports safe, reliable transportation. You will work alongside experienced technicians in a collaborative environment that emphasizes quality workmanship, efficiency, and safety. The consistent weekday schedule supports work-life balance, and the variety of buses and engine systems provides ongoing opportunities to expand your skills and grow your technical capabilities. Work Environment This role is based in a body shop environment focused on buses and heavy vehicles. You will work Monday through Friday on the first shift from 7:00 a.m. to 3:30 p.m. The shop uses a full range of body shop tools, power tools, and equipment for diesel engine, mechanical, collision-related, and fabrication work. The environment is fast-paced and production-oriented, with an emphasis on safety, cleanliness, and organization in the work area. You will frequently work around heavy equipment, engines, and vehicles, and will wear appropriate shop attire and personal protective equipment as required for a busy repair and rebuild facility. Job Type & Location This is a Contract to Hire position based out of Commack, NY. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Company Overview: Schivo Medical manufactures a diverse range of essential medical technology solutions. Collaborating with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. *** We provide in-house training in our state-of-the-art facility in Plainview, New York. CNC Operator apprenticeship Position Summary: Learn to complete manual machine tasks and run CNC machines. CNC Operator apprenticeship Essential Duties and Responsibilities: · Ability to interpret a variety of instructions furnished in written, oral, or diagram form. · Loading and unloading of materials into various machines. · General good housekeeping practices within work area. · Review work center for maintenance compliance. · Maintain correct time reporting and accurate entries on applicable manufacturing documentation. · Comply with company quality and safety requirements CNC Operator apprenticeship Necessary Education, Skills, and Competencies (including licensing and certifications): • High School Diploma, GED or higher education, • Trade school certification a plus, • Machine shop experience using various equipment., • Blueprint reading, • Experience using measuring tools., • Must be mechanically inclined., • Ability to pay attention to a single task for long periods of time., • Ability to communicate and understand verbal and written instructions (English) Work Environment: • While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts., • The noise level in the work environment is usually moderate., • Ability to work independently in a fast-paced deadline orientated environment., • Must be able to work in a team environment., • 401(k), • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • Free coffee & tea daily, • Employee reward system Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status

Job DescriptionAbout the Role:Join Sefi Fabricators as a Production Worker in Amityville, NY, where you'll play a vital role in our manufacturing process. We are looking for dedicated individuals who thrive in a fast-paced environment and are eager to contribute to our team's success. Responsibilities: • Operate machinery and equipment to ensure efficient production flow., • Monitor production processes and perform quality checks on products., • Assist in the setup and maintenance of production lines., • Follow safety protocols and maintain a clean work environment., • Collaborate with team members to meet daily production goals., • Package and label finished products for shipment., • Report any issues or concerns to supervisors promptly., • Participate in training sessions to enhance skills and knowledge.Requirements:, • High school diploma or equivalent preferred., • Previous experience in a manufacturing or production role is a plus., • Ability to operate basic machinery and tools safely., • Strong attention to detail and commitment to quality., • Excellent teamwork and communication skills., • Willingness to work flexible hours, including overtime if needed., • Physical stamina to lift heavy objects and stand for long periods., • Basic understanding of safety regulations in a production environment.About Us:Sefi Fabricators has been a leader in the manufacturing industry for over 15 years, delivering high-quality products to our valued customers. Our commitment to excellence and innovation has earned us a stellar reputation, making us a preferred employer for dedicated professionals seeking growth and stability.

Job Description When it comes to baking, BakeMark has its own secret ingredient: a team of passionate talented employees. For over 100 years, BakeMark has stood for excellence in quality and service, for our customers, our stakeholders and our colleagues. We attribute our success to our colleagues and their contributions towards meeting the needs of our customers and stakeholders. We shall share our values and ways of working. We are passionate about the baking industry. We excel at creating strong partnerships within the company and with our loyal customers. We love to innovate and thrive to manufacture and deliver performing bakery products and world-class customer service. With over 100 years of service to the baking industry, BakeMark is recognized as an industry leader and trusted partner for quality bakery ingredients, products, supplies and service. BakeMark is a manufacturer and distributor with 23 branches conveniently located across the U.S. At BakeMark we appreciate our employees and their families and offer competitive pay and a full suite of benefits: • Competitive Compensation, • Health, Dental, Vision & Life Insurance (Comprehensive healthcare benefits package, with many coverage options at a very low employee cost), • 401K (generous retirement benefits) with a Company Match, • Paid Holidays and Paid Time Off Summary: BakeMark is seeking a detail-oriented Administration Clerk to support our manufacturing and warehouse operations. This role is responsible for data entry, inventory documentation, shipping/receiving paperwork, and general clerical support to ensure efficient plant operations. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Enter and maintain production and inventory data, • Process bills for landing, purchase orders, and invoices, • Support inventory counts and reconciliation, • Prepare routine operational reports, • Maintain organized records and documentation, • Assist warehouse and production teams with administrative needs Qualifications: • High school diploma or equivalent, • 1–3 years of administrative experience (manufacturing or warehouse preferred), • Proficiency in Microsoft Office (Excel required), • Experience with inventory systems a plus, • Strong attention to detail and organizational skills Candidates fluent in Cantonese and Spanish a plus! Compensation: The hourly rate for this position is $21.00–$23.00 per hour. Final compensation will be determined based on experience and qualifications. BakeMark is an equal opportunity employer and does not discriminate in hiring or employment, in accordance with the requirements of all applicable state and federal laws, based on race, color, religion, gender, sexual orientation, marital status, national origin, ancestry, disability, medical condition, age or any other basis prohibited by law

Job DescriptionDescription: We are seeking a hands-on Automation & Controls Engineer to support, troubleshoot, and improve a wide range of manufacturing equipment in a regulated pharmaceutical environment. This role is ideal for mechanically inclined problem-solvers who enjoy being on the production floor, working directly with machines, controls, and electrical systems – not behind a desk. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:00PM Pay Range: $90,000 - $140,000 per year, depending on experience Start Date: ASAP What makes this role exciting: • A true automation playground – work hands-on with a wide variety of manufacturing equipment, controls platforms, and technologies in a complex pharmaceutical environment., • Real impact, real machines – you’ll diagnose, fix, and improve equipment that directly supports production, quality, and reliability – not abstract or purely digital systems., • High visibility & ownership – your expertise will be relied on across maintenance, engineering, and operations, with meaningful input into equipment improvements and upgrades., • Constant learning & challenge – no two days look the same; you’ll be exposed to diverse machinery, evolving technology, and new technical challenges. At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities: In this role, you will: • Troubleshoot and resolve PLC, electrical, and control system issues across a wide range of manufacturing equipment to minimize downtime and improve reliability., • Design, implement, and optimize machine control systems, including PLCs, HMIs, servos, and electrical components., • Own automation documentation and standards, maintaining current PLC/HMI programs, electrical drawings, and equipment documentation., • Collaborate closely with maintenance, engineering, and operations teams to execute repairs, improvements, change control, and equipment qualification., • Bachelor’s Degree in Electrical Engineering, Automation Engineering, or a related engineering discipline., • Mechanically curious and systems-oriented thinker, • Comfortable working directly on equipment in a production environment, • Enjoys variety, challenge, and continuous learning, • Practical, hands-on problem solver – not purely theoretical, • Hands-on experience with PLC, HMI, and servo systems (Allen-Bradley, Siemens, Mitsubishi), • Experience troubleshooting electrical control panels, sensors, drives, and actuators, • AutoCAD or similar electrical drafting experience preferred, • Working knowledge of OSHA and NEC requirements