Trabajos phone repair en Troy, New YorkCrear alertas

Job DescriptionJob Requirements The (HVAC) Service Technician is responsible for executing field service activities, including preventative maintenance, inspections, start-ups, and emergency repairs, ensuring the safe and efficient operation of systems according to design specifications and customer requirements. This role demands meticulous system troubleshooting capability, strict adherence to safety standards, and effective communication with clients to manage expectations and ensure satisfaction. You should be able to repair generators, respond to emergency calls, and commission new systems. This position is part of the union and will follow the policies, benefits and perks set forth under the local's Collective Bargaining Agreement (CBA). The hourly rate is dependent on the level of expertise and includes pension, health insurance and annuity. The Company provides the necessary tools, equipment, vehicle with gas card, clothing, laptop, and cell phone. Compensation The expected pay range for this position is $20.71-$29.58 per hour, depending on experience, qualifications, and geographic location. Stark Tech reasonably expects to pay within this range at the time of hire. Individual compensation is determined based on several factors including experience, education, certifications, skills, internal equity, and market conditions. Work Experience • High School Diploma or equivalent and at least 2 years of experience in HVAC, or the equivalent combination of education (technical school) and experience., • Must follow union qualification process for Journeyman standing., • Knowledge in all facets of the HVAC industry, including but not limited to Air Conditioning, Heating, Electrical, Boilers, Humidification, Dehumidification, and Refrigeration., • Must have universal EPA CFC certification., • Must have 10-hour OSHA certification., • Must be a highly motivated and an independent thinker., • Must be able to thrive in a fast-paced, high profile (often mission critical) customer setting. Ability to multi-task, work under pressure and meet deadlines required., • Knowledge of HVAC&R theory, solid mechanical, electrical troubleshooting, and repair skills required., • Ability to read wiring diagrams, mechanical layouts and blueprints required., • Must have experience installing clean, dry refrigeration piping systems and associated practices., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies. At Stark Tech, we invest in our employees by offering a competitive benefits package recognized with Mployer's 2026 Great Employee Benefits designation, featuring Market Leading Medical Benefits, comprehensive medical, dental, and vision coverage, generous employer HSA contributions, paid time off, a 401(k) with employer match, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. \nCompany Description At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter. At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Job DescriptionUTS, LLC is looking for experienced independent contractors to perform warranty service work for door and window manufacturers and retailers across the United States. Our company brokers inspection, repair, and installation services, ensuring that our partners' products are maintained to the highest standards. If you have expertise in inspecting, repairing, and installing doors and windows, we want to partner with you. About UTS, LLC: UTS, LLC is a Veteran Owned Small Business with a Coast-to-Coast National Network of Skilled Technicians. We provide service, repair, and installation of building products, completing over 10,000 jobs annually. We have a strong reputation for quality and reliability, making us a preferred partner for leading national and global door and window companies. Why Join UTS? • Competitive Pay: Starting at $55/hour, • Additional Compensation: Mileage paid; helper pay is ½ of lead tech pay, • No Job Searching: Jobs are sent to you via a user-friendly phone app, • Flexible Schedule: You manage your hours based on your availability, • Guaranteed Workload: Part Time 2 - 3 per month. Must be willing to drive 100 miles radius from Albany, NY market. Jobs requiring travel over 70 miles one way will be quoted more than the $55 per hour, to include time spent traveling. Must have helper availability (we pay you to pay them) and General Liability Insurance. Benefits: • Steady Income: Part Time 2 - 3 jobs per month. Great extra income. Jobs further than 70 miles, one way, will be quoted to include time spent traveling., • Convenient Payments: Completed work orders are paid via direct deposit bi-weekly., • Automated Scheduling: Use our automated system to receive and schedule jobs., • Travel Compensation: Extra mileage and time spent traveling are compensated. Additional pay for work requiring travel over 70 miles, including hotel expenses if needed.Key Responsibilities:, • Inspection and Repair: Inspect, diagnose, and repair windows and doors under warranty., • Installation: Install new doors as needed., • Customer Interaction: Handle customer relations professionally and courteously., • Mobile App Use: Enter service actions and results directly into our app on-site and respond to automated scheduling text messages to coordinate job schedules. Having an iPhone or iPad is a plus., • Scheduling: Use our AI-enabled scheduling service, communicated through text messages or in our mobile app, to schedule and complete work orders promptly following manufacturer guidelines. Or you may call the customers and schedule directly with them. Requirements: • Experience: Experience in window and door inspection, repair, and installation., • Tools and Transportation:, • Required Tools:, • Hand tools (hammers, screwdrivers, pliers, etc.), • Power tools (drills, saws, etc.), • Measuring tools (tape measure, level, etc.), • Safety equipment (gloves, safety glasses, etc.), • Specialized tools for windows and doors (glazing tools, caulking guns, pry bars, etc.), • Transportation: Must have suitable transportation for transporting insulated glass units and door units. Examples of acceptable transportation include:, • Trucks with racks or A-frames for secure glass transport, • Trailers equipped to carry large door units safely, • Vans with sufficient cargo space and proper securing mechanisms, • Professionalism: Must speak and act professionally., • Insurance: Proof of General Liability Insurance is REQUIRED. Due to the volume of work, currently having the Certificate of Insurance puts more money in your pocket., • Location: Work area includes 100 mile radius of Albany, NY market and surrounding areas. Jobs requiring travel over 70 miles one way will be quoted more than the $55 per hour, to include time spent traveling. Application Process: Interested independent contractors are invited to submit their details, including proof of insurance and relevant experience. Check out our Website - utsservicepros.com Powered by JazzHR ra4uBv3sgB

Job Description Job Summary · Road service technician servicing gas, steam, electric and electronic commercial food service equipment at customer locations. · Servicing any equipment used in the preparation of food in commercial establishments such as ranges, dishwashers, steamers, microwave ovens, fryers, conveyor ovens, coffee makers, and toasters. · Service is performed in any commercial kitchen such as those found in schools, restaurants, colleges, and nursing homes. Job Qualifications · Must work well with various hand tools. · Have basic understanding of electrical concepts, basic trouble shooting skills and mechanical aptitude. · Excellent communication skills conveying confidence and understanding to our customers of the service we provide. General Accountabilities · Talk to customers or refer to work orders in order to establish the nature of appliance malfunctions. · Observe equipment in operation and perform adequate troubleshooting measures through but not limited to various test equipment such as VOM, amp probe, pyrometer or manometer, etc. · Refer to schematic drawings, product manuals, and troubleshooting guides in order to diagnose and repair problems. · Replace worn and defective parts such as switches, circuit boards, thermostats, gas valves, burners or defective wiring. · Reassemble units after repairs are made, making adjustments and cleaning and lubricating parts as needed. · Record maintenance and repair work performed on equipment. · Maintain stocks of parts used in on-site installation, maintenance, and repair of appliances. · Observe and test operation of appliances following installation, and make any initial installation adjustments that are necessary. · Instruct customers regarding operation and care of appliances, and provide information such as emergency service numbers. · Handle invoicing of COD customers. · On call approximately every 5th or 6th weekend. · * The company reserves the right to add or change duties at any time. Skills · Troubleshooting · Critical Thinking · Operation Monitoring · Equipment Selection · Judgment and Decision Making · Complex Problem Solving · Time Management Tools · Technicians must have their own general hand tools including but not limited to screw drivers, socket sets, wrenches, and hammers. · Driver’s license. Benefits · Vacation time, sick time, and holiday pay · Health · 401K · Company vehicle · Company cell phone and Tablet Salary · Service Tech Trainee beginning salary $18-$25 · Experienced Tech salary $25-$35 · Overtime available. \nCompany Description Commercial cooking and dishwashing equipment parts and service.. Commercial cooking and dishwashing equipment parts and service..

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside within 60 miles of Troy, New York. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside within 60 miles of Troy, New York., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $62,400-$89,440 annual salary/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $30—$43 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description About Stampede Ventures, Inc. Stampede Ventures provides a diverse portfolio of full-service construction, renovation, and civil work to meet the needs of Government and private sector customers. We leverage our experience to provide our customers with the best possible pricing and high-quality service on all projects we perform. Our senior management team has more than 100 years of facility maintenance, repair, renovation and construction experience, primarily serving the U.S. Government. About this position: HVAC Mechanic Location – Albany, NY The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Wage/Salary Range: $25.00 - $45.00 per hr. Applicants will be notified via phone or email within ten (10) business days of submittal. Essential Duties & Responsibilities • Travel daily to perform needed preventive maintenance on the HVAC and other equipment as needed., • Complete PM checklists and close out the work order in Maximo. Uploading documents and photos as needed to document work performed., • Perform minor repairs on building equipment as needed during visits. (Faucets, flushometers, change light bulbs), • Work with subcontractors for services we do not have capability to offer., • Maintain excellent customer relations during job performance Interacting with all levels of management, • Carry out repair, maintenance, or installation of equipment for the generation, utilization, or distribution of commercial systems, • Perform inspection, maintenance, adjustment, and repair of equipment to ensure constant and reliable indoor air comfort, as well as laboratory or critical environments, • Handle and repair test equipment, complex centrifugal chillers, direct expansion and chilled water-based cooling systems, large air handlers, electronic and pneumatic direct digital control systems, and air distribution systems, • Operate, procure, introduce, and get back HFC, HCFC, and CFC refrigerants, • Perform repairs and maintenance of reach in, walk in, stand alone ice machines, central plan chillers, pumps, free standing A/C units, refrigerators, roof top cooling units, and guest rooms A/C units, • Maintain inventory of parts and supplies of air conditioning and refrigeration equipment, • Design an effective preventive maintenance program to ensure maintenance of equipment is scheduled and carried out regularly as at when due, • Carry out chemical test on cooling tower and chilled water loop as required, • Ensure proper air circulation on the air handler by balancing airflow, • Assess vendor specifications and proposals and give recommendations to the customer; supervise material purchase following customer’s ordering procedures, • Perform low voltage wiring; handle BAS system Direct Digital Controllers (DDC), • Diagnose and effect mechanical, plumbing, and electrical repairs to HVAC equipment, • Carry out regular periodic plumbing and maintenance tasks as needed Required (Minimum Necessary) Qualifications • Education Requirements: High school education or GED equivalent, • Level of Experience Requirements: 5-10 years of experience maintaining and repairing HVAC equipment., • Must be able to pass an extensive background check, • Must have a valid driver’s license and transportation, • Should own the basic tools needed to perform maintenance on the equipment, • Must be able to pass drug screening, • EPA 608 Certification for refrigerant (Type 1 and Type 2). Knowledge, Skills, Abilities, and Other Characteristics • Knowledge of multiple types of HVAC systems (Mini-splits, Rooftop Units, Chillers-Air Cooled, etc), • Good mechanical/electrical/plumbing skills as related to HVAC equipment., • Ability to lift and carry weights up to 75 lbs., • Ability to work with little supervision., • Ability to travel daily within the Designated area. Our company has locations in 3 states with multiple locations, • Knowledge of organizational procedures and workflows – understanding how work moves through a company., • Basic knowledge of relevant technologies or tools – e.g., Microsoft 365, communication platforms, or industry‑standard software., • Knowledge of customer service practices – principles of providing quality service and managing inquiries professionally., • Knowledge of data privacy and confidentiality principles – awareness of proper handling of sensitive information., • Communication skills (written and verbal) – ability to convey information clearly and professionally., • Time management and prioritization – balancing multiple tasks and meeting deadlines., • Problem‑solving and critical thinking – analyzing issues and selecting appropriate solutions., • Interpersonal and teamwork skills – building rapport and collaborating effectively with others., • Attention to detail – producing accurate, error‑free work. Preferred • 10-15 years of experience maintaining and repairing HVAC equipment., • Experience with maintaining multiple locations., • EPA 608 Certification for refrigerant (Universal).., • Controls Knowledge a plus. Supervisory Responsibilities • This position will not have supervisory responsibilities. DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role. Employees must always maintain a constant state of mental alertness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technicians may be required to walk/stand/sit for extended periods as needed. Travel to and from work sites is accomplished via company owned vehicle(van/truck). Work at customer locations includes the need to bring tools to and from the work vehicle to multifloored buildings Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role. Employees must always maintain a constant state of situational awareness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technicians will report to the Project Manager daily for assignments unless scheduled for deployment to a job site. Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job Description About Dent Wizard Dent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Automotive Wheel Technician – No Experience Needed! $3,000 Sign On Bonus! Training: Fully Paid (Includes Travel, Food, and Transportation) Training compensation at the hourly rate, then phased combo compensation of hourly rate and commission as you move out of training and start building your customer base! Commission-based uncapped earning potential. Long-term earning potential: $60,000-$110,000+ Are you hands-on, detail-oriented, and love working outdoors? Do you like working with customers and making things happen? Join our growing team as a Wheel Technician and start a rewarding career—no experience required! What You’ll Do: • Travel to customer locations to service vehicles, • Remove tires and wheels from vehicles, • Use grinding and sanding tools to repair cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels), • Paint and refinish wheels to a like-new condition, • Deliver excellent customer service and promote our services What We’re Looking For: • Toughness and grit to work outdoors in various weather conditions, • Strong customer service and sales skills to interact with customers and build accounts, • Detail-oriented with a focus on quality and safety, • Manual dexterity for repetitive-motion tasks, • Strong work ethic, self-motivation and the ability to work independently, • Vision abilities including close, distance and color vision, depth perception and ability to adjust focus, • Physical stamina to kneel, bend, squat and climb, as well as lift up to 75 pounds and work on your feet, • Valid driver’s license and good driving record, • Auto painting experience or collision repair technical school training preferred but not required What We Offer: • No experience necessary – we provide comprehensive, paid training (includes travel and lodging), • Unlimited, uncapped earning potential – the harder you work and the more you master your craft, the more you can make, • Excellent benefits – medical, dental, vision, 401(k), paid vacation, and more, • Awesome perks – tools and supplies, company vehicle, gas card, mobile phone, and more, • Independence – manage your day without micromanagement, • Supportive team – work with a fun, dynamic crew that’s got your back, • Career growth – advance to higher Tech levels or management roles, • Advancement potential into higher Tech levels (with more $) or management roles All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $21.00/Hour Why Dent Wizard: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The compensation offered for this position will depend on qualifications, experience, and geographic location. The total compensation package may also include commission, bonus or profit sharing. Sign on bonus is subject to state and local laws, terms and conditions, including employment status and length-of-service requirements. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Job Description Van Hook Service Company Inc. was founded in 1973 and currently services thousands of locations throughout New York and Pennsylvania. A great opportunity at a growing company! We have multiple positions available, we offer the highest pay scale based on experience, full benefits at no cost to the employee, large 401k contributions, overtime opportunities available, you will not find better benefits anywhere in the HVAC industry. A fully equipped service truck, training, cell phone, all tools and support needed to get the job done are provided by the company. Come work at a company that values its employees and provides the highest level of service to its customers through integrity, excellence, innovation and professionalism. HVAC Technician Job Description We are looking to hire a detail-oriented HVAC technician to install, maintain and repair HVAC systems. The HVAC technician will be skilled in cleaning, adjusting and repairing systems. You will guide and advise the customer to select the most appropriate air quality system to fulfill their requirements. You will be responsible for air quality systems from installation to end-of-life by performing maintenance, warranty, and emergency repairs. To be successful in this role, customer satisfaction, safety and communication should be your top priority. Ideal candidates will be patient and have excellent organizational and troubleshooting skills. HVAC Technician Responsibilities: • Installing, maintaining, and repairing ventilation and air conditioning systems and equipment., • Diagnosing electrical and mechanical faults for HVAC systems., • Cleaning, adjusting, and repairing systems, and performing warranty services., • Performing emergency repairs promptly and efficiently., • Keeping daily logs and records of all maintenance functions., • Complying with service standards, work instructions and customers' requirements., • Assisting with customers' queries. HVAC Technician Requirements: • High school diploma, GED or suitable equivalent., • 2+ year experience as an HVAC technician, and willingness to continue education in HVAC field., • Valid driver’s license., • Understanding principles of air conditioning, refrigeration, and heating., • Excellent written, verbal, and interpersonal skills., • Ability to work after hours when scheduled. Work Remotely • No Job Type: Full-time Benefits: • 401(k), • Company Vehicle, • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance Schedule: • 8 hour shift, • On call, • Overtime Education: • High school or equivalent (Required) Experience: • HVAC: 2 years of field experience or equivalent License/Certification: • Driver's License (Required), • EPA Certification (Preferred), • OSHA 10 (Preferred) Work Location: Multiple locations \nCompany Description Van Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish Van Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish

At the front line of the Safelite experience, the Auto Glass Technician is an entrepreneurial, hands-on professional that leverages their Safelite training, industry-leading tools and technology to complete repairs, replacements and recalibrations in the shop and on the go with our Mobile Glass Shop offerings. What You Will Do • Provide all vehicle glass repair and replacement services at a Safelite Shop or Mobile Glass Shop in the most efficient manner, focusing on safety, quality and exceptional customer service. Clean customer vehicles after every job., • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing., • Proficiently operate Safelite's tools and technologies, including: True Seal, Ezi-Wire, Glass Table System (GTS), chemicals (as required by the "Safelite Way of Fitting", work order and customer administration systems, and Safelite's handheld Mobile Resource Management (MRM) technology., • Safely operate company and customer vehicles throughout the workday., • Communicate with all scheduled customers in-person, via text, and on the phone; present, promote and sell Safelite promotional items and services to customers., • Performs other duties as assigned. Complies with all policies and standards. What You'll Get • Competitive weekly pay ranging from $24.00 - $28.00/hour., • Earn $5/set of wiper blades when added for customer safety., • Potential to be promoted in your first year! Earn a starting pay of $28/hour as a Senior Tech & $30.50/hour as a Master Tech. Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required, • Safelite SafeTech certification Required Experience Qualifications • Must be 18 years of age or older. Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds, • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the "Safelite Way of Fitting", • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company uniform and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures)

Job Description Field Operations Technician Job Description FirstLight Field Operations Technicians are responsible for deployment, maintenance, and repair activities on major backbone network components, cell tower back-haul equipment for Mobile Carriers, End-to-end installation, test, turn-up, and maintenance of all FirstLight Enterprise services (Internet, Hosted phone systems, Phone lines, PRI, telephony wiring) on a variety of customer premise equipment (Calix/Telco Systems/Ciena/Adtran/Cisco/Polycom & more). Works with Provisioning for installation of Service Delivery deployments, Core Network Engineering to facilitate network augments and new network buildouts and with IP Engineering to maintain internal networks. Understands Central Office equipment installation procedures, power & grounding, Fiber Optic splicing and Optical Transport fundamentals. In depth understanding of test equipment for Fiber Qualification (OTDR, Fiber Characterization, Fiber Inspection), RFC circuit testing, Ethernet, TDM, as well as testing power elements of the FirstLight network. Responsible for preventative maintenance and reporting for facility infrastructure components (i.e. HVAC, Emergency Generators, transfer switching) for all relevant CO/POPS under their area of operation. Must complete and maintain up to date facility audits providing access procedures, floor plans and rack diagrams with detailed equipment, power, and fiber information. Participate in 24/7 On-Call rotation and be available as Essential Personnel in Emergency scenarios. *This position will be responsible for providing coverage within the following counties: New York: Orange/Rockland/Westchester and New Jersey: Bergen/Passaic/Morris Preferred essential skills and competencies: • General knowledge of structured wiring: Copper/fiber optic color codes, general wiring and troubleshooting practices., • Test circuits and components of telecommunications equipment to isolate sources of malfunctions using power meters, OTDR units, CAT5 testers, and other network diagnostic tools., • Network node commissioning., • AC / DC power theory & best installation practices, • Basic knowledge of IP networking and troubleshooting skills, • Basic fiber optic fusion splicing and industry standard installation practices, • Reading and understanding CLR/DLR’s, circuit run lists, and network diagrams., • Perform site surveys and prepare MOP’s and installation instructions with diagrams and pictures., • Working knowledge of MS Word, Excel, Outlook, and SharePoint., • Must have strong organizational, time management, communication (verbal and written), and customer service skills., • Good geographical knowledge of territory to be covered., • Continually update job knowledge by participating in educational opportunities and/or reading technical publications., • The position requires the ability to safely lift up to 50 pounds and climb ladders while following all workplace safety protocols and ergonomic best practices. EDUCATION and/or EXPERIENCE: High School Diploma (or GED or High School Equivalence Certificate) with a minimum of one (1) to three (3) years relevant experience installing and troubleshooting voice and data services; or equivalent combination of education and experience. CERTIFICATES, LICENSES, REGISTRATIONS: Valid driver’s license with good driving record. Familiarity with OSHA standards. Ability to pass drug and criminal background checks for carrier access cards. We offer a competitive base salary as well as an outstanding benefits package including health, dental, vision, and life insurance, short-term and long-term disability, 401(k) with company match, tuition reimbursement, paid training, and paid time off. About FirstLight: FirstLight Fiber is a fast-growing telecommunications company in Northern New England and New York, offering a robust suite of advanced telecommunications services, including dedicated Internet access, Metro Ethernet, traditional TDM solutions, IaaS & SaaS Cloud Solutions, SIP trunks, virtual PBX, and Data Center Colocation. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight’s equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. $3,000 Sign On Bonus! Training: Fully Paid (Includes Travel, Food, and Transportation) Training compensation at the hourly rate, then phased combo compensation of hourly rate and commission as you move out of training and start building your customer base! Commission-based uncapped earning potential. Long-term earning potential: $60,000-$110,000+ Are you hands-on, detail-oriented, and love working outdoors? Do you like working with customers and making things happen? Join our growing team as a Wheel Technician and start a rewarding careerno experience required! What You'll Do: • Travel to customer locations to service vehicles, • Remove tires and wheels from vehicles, • Use grinding and sanding tools to repair cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels), • Paint and refinish wheels to a like-new condition, • Deliver excellent customer service and promote our services What We're Looking For: • Toughness and grit to work outdoors in various weather conditions, • Strong customer service and sales skills to interact with customers and build accounts, • Detail-oriented with a focus on quality and safety, • Manual dexterity for repetitive-motion tasks, • Strong work ethic, self-motivation and the ability to work independently, • Vision abilities including close, distance and color vision, depth perception and ability to adjust focus, • Physical stamina to kneel, bend, squat and climb, as well as lift up to 75 pounds and work on your feet, • Valid driver's license and good driving record, • Auto painting experience or collision repair technical school training preferred but not required What We Offer: • No experience necessary we provide comprehensive, paid training (includes travel and lodging), • Unlimited, uncapped earning potential the harder you work and the more you master your craft, the more you can make, • Excellent benefits medical, dental, vision, 401(k), paid vacation, and more, • Awesome perks tools and supplies, company vehicle, gas card, mobile phone, and more, • Independence manage your day without micromanagement, • Supportive team work with a fun, dynamic crew that's got your back, • Career growth advance to higher Tech levels or management roles All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $21.00/Hour Why Dent Wizard: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The total compensation package may also include commission, bonus or profit sharing. Sign on bonus is subject to state and local laws, terms and conditions, including employment status and length-of-service requirements. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Job Description We’re looking for an experienced Forklift Mechanics to join our team in the Schenectady/Albany area. Take your mechanical skills on the road — and be the person customers rely on. Also searching: diesel mechanic, heavy equipment mechanic, field service technician, used equipment mechanic $29 – $39/hour + Up to $8,000 Sign-On Bonus Hourly pay — you’re paid for every hour worked (not flat rate) Schedule: Monday–Friday, 8:00 AM – 4:30 PM (with overtime opportunities as needed) At Thompson & Johnson Equipment, our mechanics don’t sit in a shop all day — they’re out in the field solving problems, helping customers, and making a real impact. What You’ll Do • Diagnose, troubleshoot, and repair forklifts and material handling equipment (electric, gas, and diesel), • Perform planned maintenance and safety inspections, • Use computer-based diagnostics and OEM resources to identify and resolve issues, • Manage and maintain your service van inventory, • Communicate directly with customers to explain repairs and recommend solutions, • Complete work orders accurately and on time, • Deliver quality work — fix it right the first time, • BE A HERO What Makes This Role Different • Road-based work – no shop environment, • Variety – different customers and challenges every day, • Local travel – serving the Schenectady and surrounding region, • Consistent weekday schedule — home most nights, • Hourly pay structure — no flat rate pressure What You Bring • Minimum of 3-4 years of mechanical training and or experience (forklifts, heavy equipment, automotive, diesel, etc.), • Strong troubleshooting and diagnosing skills across hydraulic, electrical, and mechanical systems, • Ability to work independently with minimal supervision, • Solid communication and customer service skills, • Valid driver’s license with a clean driving record, • Willingness to work overtime as reasonably needed What We Offer • $29 – $39/hour based on experience (hourly — no flat rate), • Up to $8,000 sign-on bonus, • Company-provided service van, tablet, phone, uniforms, • Paid training + OEM certifications Benefits that actually make a difference: • Medical insurance as low as $5/week + FREE vision, • Dental, life, and supplemental coverage such as LTD, STD, Specified Disease like Cancer, Heart, Stroke and Kidney insurance, • 401(k) with 50% company match (up to 5%), • Generous PTO + holidays (extra for Veterans) Additional perks: • $500 annual tool allowance, • $600 annual well-being reimbursement, • $200 annual gym membership, • $100 annual boot allowance, • $100 annual company clothing allowance Why Thompson & Johnson? We’re a third-generation, family-owned company serving Upstate NY with a reputation for taking care of both our customers and our employees. • Average employee tenure: 10+ years, • Voted a Best Places to Work company by our employees (8 years running), • A culture built on teamwork, respect, and doing things the right way This is a place where mechanics build long-term careers and get promoted into service writers, lead techs, mentors, coaches, trainers, managers — not just punch a clock. Work Environment This is a hands-on, physical role requiring lifting, climbing, and working indoors and outdoors in all seasons. Prerequisites Profile assessment, physical (including eye, hearing and lead test) and drug testing for illegal substances. Apply Today If you’re an experienced mechanic who takes pride in your work and enjoys solving problems independently — we’d love to talk! Thompson & Johnson is an Equal Opportunity/Affirmative Action Employer, (M/F/D/V) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Description Destination Kia - Parts Counter Person Location: 760 Central Avenue, Albany, NY 12206 Pay: $50,000.00 - $65,000.00 per year Experience: auto parts department: 1 year (Required) Dealership: 1 year (Preferred) License/Certification: Driver's License (Required) Work Location: In person Job Type: Full-time Job description: Destination Kia in Albany, NY is seeking a full-time Parts Counterperson to join our team... Compensation is a combination of a weekly salary and monthly bonus. This is a great opportunity to work in a busy parts department of a family-owned business, with plenty of room for growth. Responsibilities include but not limited to: • Assisting customers and technicians in the selection of required parts in a friendly, professional, and efficient manner., • Informing customer and selling companion part requirements and specials., • Answering phone calls to provide quotes and customer inquiries., • Assists outside sales representatives with their orders., • Setting up orders for daily shipment, delivery, or pick-up with a a great degree of accuracy.., • Verifies will-call and back-order files weekly and returns to vendors, or stocks those items not picked up or required., • Replenishing and tracking inventory., • Issues and tracks requested shop tools to technicians., • Makes sure all internal requests for parts are billed on service repair order., • Keeping current on new products and product updates., • Keeps orderly records of all repair orders, invoices, insurance estimates, and special-order parts., • Participates with the parts manager in maintaining a lost sales tracking program. Qualifications: • 1-3 years of experience in an automotive parts department, • 1-3 years of sales experience preferred, • Excellent communication skills and great telephone etiquette, • Valid driver's license in good standing, • Detail Orientated, able to Read and Enter codes into the Computer, • Proficient in Automotive/Parts Software systems is highly desired. In addition to competitive pay, we offer our associates the following benefits: • Paid Time Off, • Medical, Dental, Vision, • Aflac supplemental benefits and Guardian life insurance, • 401(k) plan with company matching Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance * WE ARE AN EOE & PARTICIPATE IN E-VERIFY * Offers of employment contingent upon successfully passing review of motor vehicle records.

Job Description ★ NOW HIRING: Parts Counter Person At Hunter Truck, our people are the driving force behind our success. As one of the largest Peterbilt dealer groups in the country, we combine the resources and opportunities of a growing organization with a culture where people are empowered to make an impact. With twenty-eight locations across Pennsylvania, New Hampshire, New Jersey, New York, Vermont, and West Virginia, we offer the scale, support, and career opportunities to help you take your career to the next level. Come build your career with a team that invests in you from day one. POSITION AT A GLANCE Location: Albany, NY Position Type: Full-Time Schedule: Monday through Friday Address: 65 Railroad Avenue Albany, NY 12205 Pay: $22–$32 per hour - Based on experience SUMMARY Sell parts to all customers, over the counter, through the shop, or on the phone. ESSENTIAL DUTIES include the following. Other duties may be assigned. • Assist all customers (retail and shop) in selecting required parts in a friendly, professional, and efficient manner based on customer needs., • Informs customers of companion part requirements, specials, and ensures that the customer is exposed to the full product line., • Answer phone calls, provide price quotes and other information., • Provide high level of service to internal and external customers., • Pull and fill the orders from stock., • Notify parts manager of out-of-stock parts or shop materials that need immediate attention., • Locate out-of-stock parts from outside source and submit an emergency order, if necessary., • Notify the service advisor and the customer when special ordered parts have been received., • Follow up on back-ordered parts., • Verify will-call and back-order files weekly and returns to vendors, or stocks those items not picked up or required., • Assist outside sales representatives with their orders., • Make sure all internal requests for parts are billed on service repair order., • Receive payment from retail customers or obtains credit authorization., • Ensure that all charge sales are signed by the customer., • Ensure that all customers receive their copy of the invoice., • Issue credit for parts returned, ensuring that the original invoice, or its number, is available so that purchase and pricing can be verified., • Keep orderly records of all repair orders, invoices, insurance estimates, and special order parts., • Set up orders for daily shipment, delivery, or pick-up., • Solicit assigned accounts by phone., • Assist with inventory management duties as needed., • Keep front and rear counter areas clean and uncluttered., • Participate in all training programs that are made available., • Keep current on new products and product updates., • Participate with the parts manager in maintaining a lost sales tracking program., • Work in a team environment., • Maintain professional appearance., • Inventory & Merchandising: Manage inventory accuracy, restock, and ensure proper merchandise presentation, • Adhere to and promote all existing health and safety policies in the workplace to reinforce the Hunter culture of a safe work environment QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE

Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. $3,000 Sign On Bonus! Training: Fully Paid (Includes Travel, Food, and Transportation) Training compensation at the hourly rate, then phased combo compensation of hourly rate and commission as you move out of training and start building your customer base! Commission-based uncapped earning potential. Long-term earning potential: $60,000-$110,000+ Are you hands-on, detail-oriented, and love working outdoors? Do you like working with customers and making things happen? Join our growing team as a Wheel Technician and start a rewarding careerno experience required! What You'll Do: • Travel to customer locations to service vehicles, • Remove tires and wheels from vehicles, • Use grinding and sanding tools to repair cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels), • Paint and refinish wheels to a like-new condition, • Deliver excellent customer service and promote our services What We're Looking For: • Toughness and grit to work outdoors in various weather conditions, • Strong customer service and sales skills to interact with customers and build accounts, • Detail-oriented with a focus on quality and safety, • Manual dexterity for repetitive-motion tasks, • Strong work ethic, self-motivation and the ability to work independently, • Vision abilities including close, distance and color vision, depth perception and ability to adjust focus, • Physical stamina to kneel, bend, squat and climb, as well as lift up to 75 pounds and work on your feet, • Valid driver's license and good driving record, • Auto painting experience or collision repair technical school training preferred but not required What We Offer: • No experience necessary we provide comprehensive, paid training (includes travel and lodging), • Unlimited, uncapped earning potential the harder you work and the more you master your craft, the more you can make, • Excellent benefits medical, dental, vision, 401(k), paid vacation, and more, • Awesome perks tools and supplies, company vehicle, gas card, mobile phone, and more, • Independence manage your day without micromanagement, • Supportive team work with a fun, dynamic crew that's got your back, • Career growth advance to higher Tech levels or management roles All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $21.00/Hour Why Dent Wizard: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The total compensation package may also include commission, bonus or profit sharing. Sign on bonus is subject to state and local laws, terms and conditions, including employment status and length-of-service requirements. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - Albany, NY & Western MA If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 99-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 99-year history, • Premier product supported by factory authorized local technicians For more information about our company, please visit our website via the following link: https://www.blakethermal.com/ Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed, • Confident but Humble JOB DESCRIPTION: Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Technical report writing BENEFITS: • Service vehicle with gas card (once trained and independent), • Cell phone, • Extensive technical training & professional development opportunities, • Medical, dental, vision, life/ad&d, and long-term disability, • 401K, • Vacation and paid sick time, • 10 company holidays, • Compensation commensurate with experience, • Paid travel time - to and from the job site RESPONSIBILITIES/EXPECTATIONS: • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team, • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions, • Actively promotes safe behaviors and health awareness at all times in the execution of daily tasks This opportunity offers a competitive salary (commensurate with experience) 401k, generous health benefits, company paid life/ AD&D, company paid training with future advancement opportunities. Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. This role requires ability to pass a pre-hire drug test, pre-hire background check and completion of an I-9 form. Blake Thermal Sales & Service, Inc. is a proud drug-free workplace.

Job DescriptionBenefits: • Company car, • Competitive salary, • Opportunity for advancement Maintenance Technician Specialties: Specialize in one of these trades • HVAC, • Plumbing, • Electrical, • Carpentry, • Appliances Overview: The Maintenance Technician Repair is responsible for ensuring all aspects of property maintenance meet or exceed established standards. This includes maintaining units, common areas, building exteriors, and grounds, as well as addressing service requests promptly. The role also focuses on asset preservation and delivering exceptional service to residents while upholding company guidelines. Essential Duties and Responsibilities General Maintenance & Repairs • Perform routine preventative maintenance and repairs on HVAC systems, plumbing, electrical components, and appliances., • Complete carpentry tasks such as drywall repair, painting, and general upkeep., • Troubleshoot and resolve maintenance issues in both individual units and common areas., • Provide superior customer service while maintaining a professional demeanor when interacting with residents, coworkers, and the public.Property Inspections, • Conduct regular inspections of common areas, amenities, and building systems to identify maintenance needs., • Maintain detailed records of inspection findings and completed work., • Keep grounds, common areas, and building exteriors clean and free of debris or safety hazards to ensure excellent curb appeal., • Respond to work orders by accurately assessing issues and completing necessary repairs.Resident Service Requests, • Address and resolve resident service requests in a timely, professional manner, including electrical, HVAC, plumbing, and appliance repairs, as well as carpentry and other building fixture maintenance., • Communicate effectively with residents regarding repair status and estimated completion timelines., • Prepare apartments for market readiness, including painting, drywall repair, carpentry, carpet cleaning/repair, general repairs, and housekeeping., • Complete unit turns promptly, reporting additional findings to the Maintenance Supervisor and Property Manager.Safety & Compliance, • Ensure all work complies with company policies, local building codes, and safety standards., • Follow proper safety procedures, use personal protective equipment, and report any hazards or potential safety risks., • Maintain compliance with local, state, and federal regulations, including fair housing laws.Emergency On-Call Duties, • Troubleshoot and resolve urgent maintenance issues with minimal supervision., • Participate in the on-call rotation schedule to address emergency maintenance outside normal business hours. Attire & SOP, • Wear appropriate attire (e.g., khakis, boots, collared shirt) as outlined by company policy. Company-provided clothing may be worn if available., • Adhere to all Standard Operating Procedures (SOPs) and company manuals. MAINTENANCE TECHNICIAN - ADDITIONAL REQUIERMENTS: · Basic knowledge of tools. · Ability to lift objects weighing 50 lbs. without the assistance of tools or devices. · Must be physically able to climb ladders, bend, or crawl into awkward spaces. · Must have a valid, clean driver’s license. · Ability to operate and maintain a company vehicle. · Ability to multi-task, establish priorities. · Maintain professionalism while in contact with residents and employees. · Communicate and react with a sense of urgency. · Ability to work independently. · Ability to maintain a positive relationship with coworkers and supervisors. · Ability to use a smart phone and software apps. · Drug and background check required. MAINTENANCE TECHNICIAN - SKILLS: Entry Level Acceptable and Skills will be Developed. · Basic appliance repair plumbing, electrical, painting/patching, and carpentry skills. · Knowledge of tools and machinery and how to properly maintain and operate them, as safety is a priority.

Job Description At The Rosenblum Companies, better spaces don't run themselves. Behind every well-maintained building is a team of professionals who keep operations organized, vendors coordinated, systems running smoothly, and tenants supported. We’re seeking an organized and service-minded Facilities Coordinator to support the operations of our growing portfolio. This is an integral part of our Building Maintenance and Property management teams, ensuring our buildings, systems, vendors and operational processes run efficiently. About us: The Rosenblum Companies is one of the Capital District’s largest fully integrated real estate development and management companies. Our portfolio encompasses over 1.7 million square feet of award-winning properties. We’re proud to have been named Developer of the Year in 2024 and one of Albany’s “Best Places to Work” and Times Union’s “Top Workplaces!” Major Accountabilities • Contract Management, • Maintain accurate and current records of property management related vendor contracts, service agreements, warranties, proposals and other contractual documentation, • Maintain a centralized contract tracking system, including terms, service scope, property coverage, pricing, expirations dates and renewal requirements., • Assist the facilities team in obtaining proposals, bids, contract documents and coordinating contract execution., • Maintain vendor Certificate of Insurance (COI) records and other required compliance documentation., • Financial Administration & Reporting, • Provide administrative support on repair and maintenance (R&M) and capital expenditures., • Maintain budget tracking tools and assist in monitoring actual expenditures against approved budget., • Assist with invoice review by verifying appropriate property, account, or other required information prior to approval., • Building Management Systems Administration, • Serve as the primary administrative support resource for Building Management Systems (BMS) and related facilities technology, • Monitor system notifications, alarms, and other identified conditions and appropriately route or escalate issues to the Facilities Manager, Building Engineers, Property Managers, or vendors., • Assist with entering and maintaining equipment, preventative maintenance, inspection, and other facilities information within applicable systems., • Develop working knowledge of property technology and building systems sufficient to provide effective administrative and first-level user support., • Standard Operating Procedures and Quality, • Assist the Building Engineering team in developing, documenting, implementing, and maintaining facilities Standard Operating Procedures (SOPs)., • Maintain a centralized and organized library of current facilities procedures, forms, checklists, inspection standards, emergency information, and other operational documentation., • Maintain equipment inventories, asset records, warranties, service histories, and other critical building information., • Track key facilities metrics, including preventative maintenance completion, overdue tasks, inspections, work orders, recurring repairs, and other performance measures, • Positive First Impressions, • Front desk coverage for all business hours; coordinate team coverage during breaks and time off., • Ensure that helpful customer service is consistently provided in accordance with service protocols and company core values., • Professionally greet and direct calls and visitors. Other General Duties and Expectations • Provide exceptional customer service through positive interactions with teammates, customers, tenants, visitors, and vendors in person and via telephone, email, and tenant portal., • Provide general administrative support to managers within the Property Management department. Assist in defining and documenting service needs and new departmental processes as they arise to help maintain consistency and clarity., • Maintain confidentiality when working with contract, financial information, building information and other sensitive records., • Schedule and coordinate departmental meetings and trainings., • Assist with corporate team meetings and events., • Provide backup support to administrative/business operations team., • Perform other additional duties as assigned based on company needs. Knowledge, Skills, & Abilities • Knowledge of customer service standards and procedures with ability to provide efficient, timely, reliable, and courteous service to internal customers., • Strong interpersonal and communication skills and ability to work effectively with a diverse community., • Strong attention to detail, organization, and time management skills, with the ability to prioritize multiple tasks seamlessly. Use task/workflow management system to track open items and due dates., • Collect, interpret, and/or analyze data and information. Ability to solve practical problems and deal with a variety of concrete variables in situations where some standardization exists. Ability to interpret a variety of instructions furnished in written, oral, or schedule form., • Must be able to speak, read, write, and understand the primary language(s) used in the workplace, bilingual skills a plus. Ability to read, analyze, and interpret general business information, including but not limited to Company policies and procedures. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Ability to calculate basic figures and amounts such as totals, averages, percentages, fractions, etc., using calculators and basic Excel formulas. Minimum Job Requirements • 1-2 years of experience in an administrative support or customer facing role required, experience in real estate and/or property management preferred., • Associates’ Degree required; relevant experience may substitute for degree., • Proven ability to build and maintain quality relationships with tenants, vendors, and team members., • Ability to work with sensitive files and maintain confidentiality., • Exceptional computer literacy, including proficiency with common business software (e.g., Outlook, Word, Excel), basic setup and troubleshooting of technology problems, and ability to learn new software/systems such as cloud portal, maintenance, and communication tools. Working Conditions & Physical Effort The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee may be required to engage in physical activity including bending, transporting, reaching, operating a computer, phone, and communicating efficiently. The ability to remain in a stationary position as needed, potentially for prolonged periods, is required., • Ability to move and position equipment weighing up to 25-50 pounds, independently or with assistance, and to work off ladders on an occasional basis., • Local travel to our properties is required; as such, an unrestricted driver’s license is required., • Work is typically done indoors in an office environment with low to moderate noise levels requiring the individual to moderate the volume of speech and devices.

Job Description ROGO Fastener Co., Inc. has been serving the automotive and industrial markets for over 34 years. We are looking for experienced, motivated Outside Sales Representatives to join our growing sales team. This is a true field outside sales position. You will spend your day on the road visiting customers, building relationships, developing new business, and managing your own territory. WHAT YOU'LL DO • Manage and grow an assigned sales territory, • Visit automotive, industrial, maintenance, and commercial accounts, • Develop new accounts while growing existing business, • Build long-term customer relationships, • Demonstrate and sell ROGO's fasteners, chemicals, shop supplies, and related products, • Identify customer needs and provide solutions, • Work independently while being supported by an experienced sales organization WHO WE'RE LOOKING FOR We are especially interested in candidates with long-term outside or route sales experience, particularly in: • Automotive, • Industrial / MRO, • route sales, • Other relationship-based field sales The ideal candidate is: • Self-motivated and comfortable working independently, • Confident communicating with customers, • Driven to build and grow a territory, • Comfortable spending the day on the road, • Organized, dependable, and goal-oriented, • Experienced in developing and maintaining customer relationships Automotive or mechanical knowledge is a plus. WHAT ROGO OFFERS • Base salary plus commission, • Performance bonuses and incentives, • Gas allowance, • Company phone and tablet, • Health insurance & Aflac, • 401(k) matching up to 4%, • Established product line and customer base, • Protected sales territory, • Training and ongoing sales support, • Opportunity for advancement into sales management WHY ROGO? ROGO gives you the opportunity to operate your territory and directly benefit from the business you build. We provide the products, tools, support, and established reputation. You bring the drive, relationships, and ability to grow the business. If you're an experienced field sales professional looking for an opportunity where your effort and results can directly impact your income and career, we'd like to hear from you. \nCompany Description ROGO Fastener Co., Inc. is a distributor of Fasteners and related supplies for the Automotive Repair Industry in business for 34 years. ROGO Fastener Co., Inc. is a distributor of Fasteners and related supplies for the Automotive Repair Industry in business for 34 years.

Job Description HELP DESK AIDE I DISTINGUISHING FEATURES OF THE CLASS: This position involves responsibility in providing Help Desk support, including monitoring network issues to ensure a timely resolution. The incumbent must also perform desktop hardware repairs and assists in the configuration of end-user PC desktop hardware, software, and peripherals. Other responsibilities include researching technical issues, providing PC and Software orientation to new employees, and answering staff questions pertaining to hardware and software. Work is performed under the supervision of the Director of Information Technology. TYPICAL WORK ACTIVITIES: (Illustrative Only) • Provides Help Desk support to end users on a variety of issues;, • Documents, tracks and monitors the problem to ensure a timely resolution;, • Follows all documented Help Desk standards and procedures;, • Answers staff questions in person, via phone, and/or email on Housing Authority supported hardware and software;, • Troubleshoots and determines computer problems (hardware, software, user access, etc.);, • Assists with setting up equipment for meetings, public engagements, groundbreaking ceremonies, trainings, etc.;, • Identifies, researches, and resolves technical problems relating to responsibilities;, • Escalates issues to the appropriate parties as needed to ensure the most efficient and expedient means to problem resolution;, • Assists in the configuration of end-user PC desktop hardware, software, and peripherals;, • Supports computer labs;, • Coordinates timely repair of PC computer equipment, printers, etc. covered by third-party maintenance agreement;, • Performs desktop hardware repair for PC computer equipment and peripherals that are not covered by third-party vendor maintenance agreements;, • Provides PC and Software orientation to new staff;, • Participates in team projects as required;, • Documentation of trouble issues, devices, contracts, etc.;, • Assists with records management;, • Performs related work as required. FULL PERFORMANCE KNOWLEDGE, SKILLS, ABILITIES, AND PERSONAL CHARACTERISTICS: • Good knowledge of personal computers and office equipment;, • Good knowledge of information technology help desk procedures, processes, and practices;, • Good knowledge of the principles and practices of providing effective and timely customer support;, • Good knowledge of Windows-based software and applications; working knowledge of data communication networks;, • Ability to guide staff in the use of computers and various software packages;, • Ability to establish effective working relationships with others;, • Ability to problem-solve computer related problems;, • Ability to comprehend oral and written technical information;, • Ability to communicate clearly both orally and in writing;, • Initiative, tact, and patience;, • Good judgment; Resourcefulness; Reliability;, • Physical condition commensurate with the demands of the position. MINIMUM QUALIFICATIONS: A. Graduation from a regionally accredited or New York State registered college or one accredited by the NYS Board of Regents to grant degrees with an Associate’s Degree or higher in Information Technology OR B. Successful completion of fifteen (15) credit hours* in Management Information Systems, Computer Science, Information Resources Management, Information Technology, or a closely related field offered by a technical training institute, college or a corporate training program and one (1) year of work experience in information technology help-desk management and customer support; OR C. An equivalent combination of training and experience as defined by the limits of (A) and (B) above. *Coursework in the use of specific programs such as WORD, EXCEL or ACCESS, data entry, and A-Plus is not acceptable. * Special Requirements: A valid NYS Driver’s License is required at the time of appointment and for the duration of employment. Travel to different AHA locations across the city of Albany will be required with mileage reimbursed. Must have flexibility to work outside the normal business hours. GRADE 8 SALARY $47,191.28 HOURS 37.5 PER WEEK (M-F) Interested candidates should submit completed applications and resumes directly to: AHA Career Center: http://www.albanyhousing.org/employment Or in person at 200 South Pearl Street Albany, NY 12202 Attn: Personnel Department

Job Description Lia Hyundai Albany is seeking an experienced Service Advisor to join our team. COMPENSATION RANGE: $50K-$80K+ SIGN ON BONUS: N/A REQUIREMENTS: • Must hold a high school diploma or equivalent, • Excellent customer service skills, • Basic Computer skills, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Excellent oral and written communication skills, • Must have a clean and valid driver's license KEY RESPONSIBILITIES: • Oversee flow of Drive Lane. Ensure that customers receive prompt, courteous, and effective service., • Take ownership of the customer's experience by communicating all repair information and recommendations from the technician to the customer, • Provide concierge support for all owner inquiries, whether phone or in person, to assure a positive customer experience, • Ensures that the daily inventory of technicians' time is consistently sold to service customers., • Distribute work between technicians efficiently BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: Founded in 1979, Lia Group Companies consist of Lia Auto Group, Vent Fitness, BurgerFi and various commercial properties including Hamilton Square shopping center in Guilderland. Our team of over 1500 dedicated team members at 23 locations throughout NY, MA and CT offer our quality products and deliver exceptional consumer experiences for over 35 years. We have a long history of success and growth providing a continuous opportunity for development. We offer competitive wages, generous benefits, a safety-conscious, drug-free work environment. We seek those who can help us take our growth and service to the next levels. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Lia Hyundai Albany is seeking Internet Sales/Business Development Center Agent to join our team. COMPENSATION RANGE: $40K-$65K+ SIGN ON BONUS: N/A REQUIREMENTS: • Willing to work evenings and Saturdays, • Organized and ambitious self starter with enthusiastic personality, • Prompt and courteous, • Prior experience is preferred, but we're willing to train the right person, • Professional appearance and positive attitude, • Comfortable speaking with customers over the phone, via email and text, and face-to-face, • Excellent verbal/written communication skills, • Must have a clean and valid driver's license KEY RESPONSIBILITIES: • Answering both internet and phone leads along with maintaining follow up until appointment is made, • Reach out to missed appointments, • Work with a team that will mainstream the process for our customers and keep effective communication among BDC, sales, and management, • Work within our CRM daily, • Answer customer questions on product knowledge and current specials, • Set appointments, • Follow up with customers who have already come in to continue helping in the search BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Annual Base Salary Range: $83k+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 75 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! We are seeking a Agriculture Precision Sprayer Specialist to provide after-sales technical support for sprayer and application equipment across our territory. This role supports customers, branch service teams, and sales staff through equipment inspections, setup and startup assistance, calibration support, troubleshooting, technician training, operator training, demonstrations, and parts and service opportunity development. The ideal candidate will serve as a technical resource and field support specialist for sprayer and application equipment while helping scale support across Utica, NY to New England (MA, CT, & VT areas). Key Responsibilities: • Conduct on-site inspections of sprayer and application equipment, • Help create service opportunities by identifying repair, maintenance, calibration, software update, and parts needs, • Provide phone, remote, and on-site troubleshooting support and coaching for technicians on sprayer and application equipment questions from customers, • Act as a first-line escalation point for advanced application-related service questions, • Diagnose and train technicians on technical, mechanical, electrical, hydraulic, and operational issues and help determine the best path to resolution, • Support machine setup, commissioning, and startup for new equipment sales, • Help ensure customers and branch teams understand equipment operation, system settings, and best practices, • Support software updates, product improvements, and operational adjustments as needed, • Deliver operator training for farmers, commercial operators, and other end users, • Provide customer support during the early stages of equipment ownership or after major service events when additional guidance is needed, • Assist with equipment demonstrations in support of sales efforts, • Take customer parts orders related to sprayer and application equipment, • Accurately enter and coordinate parts orders through the designated branch or process, • Build strong working relationships with customers to encourage ongoing after-sales support activity Qualifications: • Experience with sprayer, application, agricultural, or related equipment service and support, • Strong troubleshooting and diagnostic ability across mechanical, hydraulic, electrical, and operational systems, • Experience supporting customers, technicians, or dealer/service teams in a field or technical support role, • Ability to train technicians and operators in both field and shop environments, • Strong communication, organization, and documentation skills, • Ability to work independently in the field and collaboratively with branch teams, service managers, and sales staff, • Willingness and ability to travel regularly to customer sites, branch locations, demonstrations, and events Benefits • Medical, Dental & Vision Insurance, • Health Savings Account (Employer + Employee Contributions), • Accident & Disease Insurance, • 401K Plan + Match, • Competitive Paid time off Policy, • Short/Long Term Disability, • Annual Reviews Monroe Tractor is proud to be an Equal Opportunity Employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply and join a team where your work makes a difference every day. This is our target base range for this position. However, we are always looking for top talent. We scale pay based on the specific skills and background you bring. If your proven track record commands a higher package, we still want to hear from you. Pay Transparency $20—$39 USD

Job DescriptionService Writer / AdvisorAlbany, New York About the Role The Service Writer serves as the main point of contact between customers and the service department, ensuring customer needs are accurately identified and translated into detailed work orders. They coordinate with technicians, parts, rentals, and sales teams to manage repairs efficiently, maintain strong customer satisfaction, and support profitable service operations through effective communication, technical knowledge, and workflow management. What You’ll Do • Serve as the primary point of contact for customers, providing professional service in person, by phone, and via email., • Document customer concerns and service requirements accurately to ensure efficient repair processing., • Prepare service estimates, coordinate approvals, and communicate repair timelines with customers and internal stakeholders., • Create, maintain, and close work orders while ensuring accuracy of labor, parts, and billing information., • Schedule service appointments and assist in managing shop workflow and capacity., • Monitor repair progress, collaborate with technicians, and provide timely updates on equipment status, parts availability, and repair delays., • Verify warranty coverage and process warranty documentation in accordance with company and manufacturer requirements., • Coordinate external vendor services, purchase orders, and other administrative activities supporting shop operations., • Partner with accounting and internal departments to ensure proper repair authorization, invoicing, and customer account management., • Build strong customer relationships by resolving concerns, maintaining open communication, and delivering a high level of customer satisfaction. Total Rewards • Anticipated Salary Range: $45,000.00-$60,000.00 – exact wage will be based on experience, education and qualification, • Quarterly profit-sharing bonus opportunity, • Annual performance review with increase opportunity, • Comprehensive health and welfare benefits, • Paid Vacation & Paid Personal days, • 401 (k) Employer matching program Position Details Location: Albany, NY Status: Permanent Position Type: Salaried Schedule: Monday-Friday - occasional extended hours may be required based on operational needs. Vacancy Type: Existing vacancy What You Bring • 3+ years’ experience in a related administrative/customer service position, • Experience preparing quotes and opening/closing work orders, • Experience with MS Office suite and other dealership/customer work order system, • Mechanical aptitude or previous exposure to a heavy equipment work environment is an asset, • Passion for customer service, • Ability to organize, multitask and plan work efficiently, • Positive and collaborative attitude, • Strong communicator Additional Requirements: • High School Diploma, GED or equivalent, • Valid driver’s license and satisfactory driver’s abstract required for operational responsibilities, • Completion of a job-related background check in accordance with applicable laws Who We Are Joe Johnson Equipment (JJE) is a leading distributor of public works equipment across Canada and the U.S. We support municipalities and contractors with equipment such as vacuum trucks, refuse and recycling vehicles, street sweepers, and sewer inspection systems. We are a proud subsidiary of Federal Signal Corporation. Our Core Values: Leadership, Customer Excellence, Integrity, Inspiration, Teamwork, Innovation, and Ambition Apply Today If you are looking for a new opportunity, then we at Joe Johnson Equipment, welcome your application and are committed to employment equity and encourage applications from all qualified candidates, however only those who are being considered for the position will be contacted. Accommodation is available upon request throughout the recruitment process in accordance with applicable laws.

Job Description Please apply if you are comfortable doing W2 Title: Field Engineer Location: Menands New York 12204 Duration: 6 months with possible extensions Driving or non-driving? : Driving Job Summary: Role Responsibilities • As a Field/Computer Technician, you will be assigned service requests to repair Laptops and Desktops in the metro area., • Your assignments will include repair activities such as replacing hard drives, motherboards and keyboards., • You may also perform whole unit swaps, repair or replace PC peripherals., • Must have reliable transportation as this role services the metro and surrounding areas., • Close service tickets in real time in the Client Call Management system using Company provide phone. Key Qualifications: *Must have his/her OWN RELIABLE CAR and CAR INSURANCE* • 1 Years of hands-on experience with laptop and desktop break-fix, • Computer-building background experience preferred, • General knowledge of laptop / desktop hardware and software including basic knowledge of Microsoft applications, • Ability to resolve basic / non-complex problems as directed

Job Description Lia Honda Albany is seeking experienced Salesperson with a proven track record selling new and used vehicles while maintaining exemplary CSI. We are focused on delivering an excellent customer experience and creating long term, repeat business relationships with all our customers. COMPENSATION RANGE: $50K-$100K+ SIGN ON BONUS: N/A REQUIREMENTS: • Punctual and reliable, • Superior customer service skills, • Willing to work evenings and Saturdays, • Ability to respond well to direction and suggestions of management, • Ability and desire to achieve individual and department goals, • Comfortable speaking with customers over the phone, via email and text, and face-to-face, • Ability to negotiate in accordance with trained method, • Must have a clean and valid driver's license KEY RESPONSIBILITIES: • Approach, greet, and offer assistance to customers who enter the dealership lot or showroom, • Develop a very strong understand of automobiles and our offerings; including features, trim levels, capabilities, competitive models, etc., • Qualify customers by understanding their requirements and interests and using this information to determine the best vehicle and options to fit their needs, • Demonstrate and perform "walk-around" by successfully explaining features, safety, characteristics; perform test-drives and explain warranties, safety ratings, and fuel mileage, • Overcome objections in a highly efficient manner to close deals; negotiate and ask for deals, complete pre-sale documents, work with customer's insurance companies, • Set realistic expectations with customer and guide them throughout the entire vehicle purchasing process, • Develop strong rapport with new and repeat customers to ensure repeat business and referrals; suggesting trade-ins, responding quickly to customer inquiries, recommending various sales campaigns, • Follow-up with sold and unsold clients through various tools and software, • Report to sales manager and general manager regarding new and pending deals, objectives, daily activities, and analysis BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description ★ NOW HIRING: Service Writer At Hunter Truck, our people are the driving force behind our success. As one of the largest Peterbilt dealer groups in the country, we combine the resources and opportunities of a growing organization with a culture where people are empowered to make an impact. With twenty-eight locations across Pennsylvania, New Hampshire, New Jersey, New York, Vermont, and West Virginia, we offer the scale, support, and career opportunities to help you take your career to the next level. Come build your career with a team that invests in you from day one. POSITION AT A GLANCE Location: Albany, NY Position Type: Full-Time Schedule: Monday through Friday, 9:30AM - 6:00PM Address: 65 Railroad Ave, Albany, NY 12205 Pay: $22.00 - $32.00/hour - based on experience SUMMARY The primary function of the Service Writer is to write up repair orders in a timely and efficient manner. ESSENTIAL DUTIES include the following. Other duties may be assigned. • Greets service customers, sell needed work, write repair orders, and estimate costs of repairs, as required., • Answer the telephone for the service department assisting customers with their inquiries., • Listens to customer’s description of vehicle problem to determine possible solutions and work procedures., • Advises the expected time the unit will be in the shop and immediately informs the customer of any delays incurred., • Obtain authorization for any work above and beyond the original scope given to the customer, prior to beginning work on the vehicle., • Open/Closes repair orders as needed to communicate the customer’s complaint to the technician., • Provide verbal instruction to technicians, when applicable., • Review all repairs performed, and be prepared to discuss with the customer, in detail, the work done., • Schedule future appointments when requested provided the work will not overtax the available technician., • Ensures a clear understanding of the customer’s financial responsibility to the repair order and what part of the total repair he will be expected to cover., • Maintain satisfactory customer relations through expeditious, courteous, and fair handling of all service customer complaints., • Administer warranty and policy adjustments in the best interest of the customer, dealership, and the OEM., • Maintain a good working relationship of warranty offerings from all man manufacturers., • Provide clear and concise information to assist the technician on the operation., • Provide documented proof that the repair is warrantable by using all available tools needed to obtain the information (i.e. WebCatÒ, SirÒ, Cat PowerNetÒ, etc.)., • Enter warranty repair order into the Warranty Management Database System (according to their policies) prior to sending to Warranty Central for processing., • Edits the writing on the repair orders to short legible descriptions ensuring the customer understands what work was performed on his/her vehicle., • Provides additional information for claims, when needed, to clarify what was done prior to sending to Warranty Central., • Maintain a consistent Open Repair order balance established by management., • Processes and reports the movement of all warranty parts as directed by Warranty Central. This includes the entry of parts returns information in the Warranty Management Database System., • Understands and ensures compliance with manufacturer warranty and policy procedures., • Refer customers who have questions about the work performed, additional maintenance or repairs, etc. to the service advisor or other appropriate individual., • Handles customer complaints with integrity and poise and, when necessary, refers dissatisfied customers to the appropriate individuals for resolution., • Provide clerical assistance to parts and service departments (making phone calls, filing, etc.)., • Provide additional assistance to other Service staff when needed., • Attend training when requested., • Receives cash, checks and credit card payments from customers; records amount received., • Maintains and files repair orders and lists missing documents., • Works with department manager to keep abreast of new products and services offered, their features and value, and any changes in price., • Maintain a professional appearance., • Keeps work area neat and clean., • Adhere to and promote all existing health and safety policies in the workplace to reinforce the Hunter culture of a safe work environment QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos; ability to write simple correspondence; ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; ability to compute rate, ratio, and percent REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few variables in standardized situations CERTIFICATES, LICENSES, REGISTRATIONS Valid Driver's License required; must meet company insurability standards PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk. The employee frequently is required to stand. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and outside weather conditions. The employee is occasionally exposed to high, precarious places. The noise level in the work environment is usually loud. WHY WORK WITH US ► Your hard work earns real rewards with competitive pay and bonus opportunities ► Comprehensive benefits package to keep you and your family covered ► 401(k) with company match because your future matters ► Your success is our priority. We offer training, mentorship, and advancement opportunities ► A supportive, team first culture where you’re never just a number ► A legacy of stability in a company that is family-owned and trusted since 1938 READY TO APPLY? If you want a role where you're valued, supported, and able to grow, this is it. Apply today and take the next step in y

Job Description General Function The Rosenblum Companies is looking for an experienced Facilities Manager(FM) to lead the people, systems, and strategies to help ensure that our portfolio performing at its best. This is a hands-on leadership role for someone who understands that exceptional facilities management goes beyond maintaining buildings—it’s about protecting assets, improving performance, developing great teams, and creating an exceptional experience for our customers. The FM will oversee building operations across our commercial and multifamily portfolios. Leading a team of Lead Building Engineers and working closely with our Property Management, Construction and Asset Management teams, this role will identify efficiency strategies to improve building performance, strengthen operation standards and drive long-term value across our properties. If you enjoy solving complex building challenges and want the opportunity to make a measurable impact across a growing real estate portfolio, we’d love to hear from you. About Us The Rosenblum Companies is one of the Capital District's largest fully integrated real estate development and management companies. Our portfolio encompasses over 1.7 million square feet of award-winning office, industrial, retail, self-storage (ValuSpace® Personal Storage), and residential mixed-use properties, notably The News Apartments and Vicina – Modern Urban Flats, both in Troy, NY, as well as the company’s own flexible workplace brands, Hone Coworks and Launchbox Flexible Warehouse Suites. For nearly four decades, Rosenblum has focused on creating and sustaining Better Spaces . We’re proud to have been named Developer of the Year in 2024 and one of Albany’s “Best Places to Work” and Times Union’s “Top Workplaces”! Major Accountabilies Lead, Mange and Hold Accountable the Building Engineering team • Provide overall direction and training protocols for the building maintenance team and. as applicable, other team members., • Foster guidance, support, and improvement opportunities through weekly team meetings and regular 1:1 meetings with Lead Building Engineers., • Regularly monitor team and property performance through metrics, observation, and collaboration. Strategic Owner of Building Systems • Serve as the company subject matter expert for all Building Systems (BS); standardize BS programming and operational practices across portfolio., • Optimize efficiency through trend analysis and data reporting., • Develop long-term strategies and technology roadmap to optimize building automation and performance., • Partner with controls contractors to identify and address issues and implement system improvements., • Utilize building analytics to reduce operating costs while maintaining occupant comfort. Energy Management & Sustainability • Develop and execute energy efficiency initiatives across the portfolio., • Lead sustainability programs that improve operational efficiency and environmental performance., • Track energy benchmarking and utility performance metrics., • Identify and implement rebates and incentives for capital improvements. Repair & Maintenance Budget Ownership • Develop, manage, prepare annual Repair & Maintenance (R&M) budgets for all assigned properties in cooperation with the Accounting team., • Monitor and analyze monthly budget variances and implement corrective action when necessary., • Provide detailed monthly reporting, with real time updates on operating expense budget, capital needs, and coordination to support NOI goals, • Identify opportunities to reduce operating costs without sacrificing service quality., • Refine and improve operating procedures to optimize cost, quality, and efficiency through analysis of new systems, vendors, products or practices. Capital Planning Budget • Develop annual and a 5-year rolling capital improvement plans to ensure buildings reflect company standards and property management best practices, while aligning spending with budgetary needs., • Prioritize projects based on asset condition, lifecycle, risk, and return on investment., • Oversee execution of approved capital projects from planning through completion. Monitor project budgets, schedules, and quality standards., • Ensure coordinate with consultants, contractors, and internal stakeholders throughout project implementation. Preventative Maintenance & Inspection Strategy • Develop and maintain comprehensive preventative maintenance programs., • Reduce reactive maintenance through reliability-centered maintenance principles., • Oversee and promote BE team ownership and performance of preventive maintenance program. Other General Duties and Expectations • Provide hands-on training and direction to LBE’s with an emphasis on quality, timeliness, cost savings, safety, and knowledge of building systems., • Escalate any tenant relationship concerns to the Property Manager as appropriate and assist in resolution., • Serve as backup to Lead Building engineers and Property Manager(s) as needed including being available for emergency response during non-work hours, • Perform related duties as assigned based on company needs. Knowledge, Skills, & Abilities • Knowledge of building systems, HVAC, electrical, plumbing and mechanical systems., • Knowledge of customer service standards and procedures with ability to provide efficient, timely, reliable and courteous service to internal customers., • Strong interpersonal and communication skills and ability to work effectively with a diverse community., • Strong attention to detail, organization, and time management skills, with the ability to prioritize multiple tasks seamlessly., • Collect, interpret, and/or analyze complex data and information. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, or schedule form., • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Ability to calculate basic figures and amounts such as totals, averages, percentages, fractions, etc., using calculators and basic Excel formulas. Minimum Job Requirements • 5-7 years of experience of facilities management including hands-on building maintenance and/or construction., • Strong knowledge of building systems, mechanical/electrical operations, and maintenance best practices, • Experience leading and managing maintenance teams and vendors., • Proven ability to build and maintain quality relationships with tenants, vendors, and team members., • Valid driver’s license and ability to travel between properties within the Capital District., • Computer literate, proficient with common business software/applications (e.g., Microsoft Office suite), and ability to adapt to new technology and mentor team in doing so. Working Conditions & Physical Effort The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee may be required to engage in physical activity including bending, transporting, reaching, operating a computer, phone, and communicating efficiently. The ability to remain in a stationary position as needed, potentially for prolonged periods, is required., • Ability to move and position equipment weighing up to 25-50 pounds, independently or with assistance, and to work off ladders on an occasional basis., • Work is typically done indoors in an office environment with low to moderate noise levels requiring the individual to moderate the volume of speech and devices; however, maintenance/construction/other activity at company properties may occasionally involve moderate work around some elements such as extreme temperatures, dirt, dust, pets, smoke, fumes, unpleasant odors, and/or loud noises. This is a direct-hire opportunity. Google reviews: https://www.rosenblumcompanies.com/reviews/ Please do not make phone calls or contact third-party recruiters. Disclaimer: The Rosenblum Companies do not accept unsolicited assistance from search firms, employment agencies, or third-party recruiters for any employment opportunities. Please refrain from making phone calls or sending emails to any employee of The Rosenblum Companies regarding this opening. All resumes submitted by search firms, employment agencies, or third-party recruiters to any employee of The Rosenblum Companies via email, the Internet, or in any form and/or method without a valid written search firm agreement in place for this position will be considered the sole property of The Rosenblum Companies; no fee will be paid if The Rosenblum Companies hires a candidate as a result of the unsolicited referral or through other means.

Job Description Lia Honda Albany is seeking an experienced Service Advisor(s) to join our team. COMPENSATION RANGE: $55K-$100K based on production and knowledge SIGN ON BONUS: Up to $1,500 based on experience, training and certifications REQUIREMENTS: • Must hold a high school diploma or equivalent, • Excellent customer service skills, • Basic Computer skills, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Excellent verbal and written communication skills, • Must have a clean and valid driver's license KEY RESPONSIBILITIES: • Oversee flow of Drive Lane. Ensure that customers receive prompt, courteous, and effective service., • Take ownership of the customer's experience by communicating all repair information and recommendations from the technician to the customer, • Provide concierge support for all owner inquiries, whether phone or in person, to assure a positive customer experience, • Ensures that the daily inventory of technicians' time is consistently sold to service customers., • Distribute work between technicians efficiently BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Gabrielli Truck Sales is looking to hire a Service Writer / Rental Agent! Position Summary Gabrielli Truck Leasing & Rental is seeking a motivated and customer-focused Service Writer / Rental Agent to serve as a key point of contact for customers requiring truck service, maintenance, repairs, and rental vehicles. This position combines service-writing responsibilities with rental coordination and requires excellent communication, organization, customer service, and attention to detail. The Service Writer / Rental Agent will coordinate customer service needs from initial contact through completion, communicate repair and maintenance requirements to technicians, provide customers with updates and estimates, and assist customers with selecting and securing appropriate rental vehicles. Essential ResponsibilitiesService Writer Responsibilities • Greet customers and provide professional, courteous service throughout the repair process., • Act as the primary liaison between customers, technicians, parts personnel, and management., • Open, update, and close repair orders accurately and in a timely manner., • Obtain detailed information from customers regarding vehicle concerns, symptoms, and service needs., • Write clear and accurate repair orders based on customer concerns and technician recommendations., • Coordinate vehicle inspections, preventive maintenance, repairs, and warranty work., • Communicate estimated repair costs, required repairs, and expected completion times to customers., • Obtain customer authorization for repairs and document approvals appropriately., • Monitor repair progress and provide customers with regular status updates., • Review completed repair orders for accuracy, including labor, parts, sublet work, and other charges., • Coordinate with technicians and the Parts Department to ensure timely completion of repairs., • Assist with scheduling customer vehicles for service and maintenance., • Identify additional maintenance or repair opportunities and communicate recommendations to customers., • Handle customer questions, concerns, and complaints professionally and escalate issues when appropriate., • Ensure customer vehicles are properly documented when received and released., • Maintain accurate records and follow all company policies and procedures.Rental Agent Responsibilities, • Assist customers with truck rental needs and determine the appropriate vehicle based on their requirements., • Explain rental options, rates, terms, policies, and customer responsibilities., • Process rental agreements and required customer documentation accurately., • Coordinate vehicle availability, reservations, check-outs, extensions, and returns., • Inspect rental vehicles with customers before and after rental periods and document vehicle condition., • Coordinate vehicle cleaning, fueling, maintenance, and preparation between rentals., • Track rental fleet availability and communicate vehicle status to the appropriate personnel., • Coordinate with the Service Department regarding rental vehicle maintenance and repairs., • Assist customers with vehicle exchanges, extensions, and other rental-related needs., • Ensure rental vehicles are properly prepared and available for scheduled customers., • Maintain accurate rental records and paperwork., • Communicate any damage, maintenance concerns, or other issues identified during vehicle inspections., • Support efforts to maximize rental fleet utilization while maintaining excellent customer service.Customer Service & Sales, • Develop positive, professional relationships with customers and fleet accounts., • Provide prompt and accurate communication by phone, email, and in person., • Follow up with customers after service or rental transactions when appropriate., • Identify opportunities to recommend additional services, maintenance, or rental solutions., • Promote Gabrielli Truck Leasing & Rental's service and rental offerings., • Work to maintain high customer satisfaction and encourage repeat business.Qualifications, • High school diploma or equivalent required., • 2+ years of experience in automotive or truck service, rental operations, fleet management, dealership operations, or a related customer-service environment preferred., • Previous Service Advisor/Service Writer or truck rental experience strongly preferred., • Knowledge of commercial trucks and basic mechanical terminology preferred., • Strong customer service and communication skills., • Excellent organizational and time-management abilities., • Ability to prioritize multiple customer and service requirements in a fast-paced environment., • Strong attention to detail and accuracy with paperwork and computer systems., • Comfortable communicating repair recommendations and costs to customers., • Proficiency with Microsoft Office and general computer applications., • Ability to work effectively with technicians, parts personnel, management, and customers.Key Competencies, • Customer-focused and professional, • Strong verbal and written communication, • Organized and detail-oriented, • Problem-solving ability, • Ability to multitask and prioritize, • Team-oriented, • Dependable and accountable, • Sales and relationship-building skills, • Ability to work effectively in a fast-paced environment, • Commercial truck knowledge preferredPhysical Requirements, • Ability to sit, stand, walk, and move throughout the dealership/service and rental areas., • Ability to inspect trucks and rental vehicles, including walking around vehicles and entering/exiting truck cabs., • Ability to occasionally lift or move items weighing up to approximately 50 pounds., • Must be able to work in an environment that may include exposure to noise, dirt, weather conditions, and vehicle exhaust. Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description About Dent Wizard Dent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Entry-Level Automotive Paintless Dent Repair (PDR) Technician – No Experience Needed! Training compensation at the hourly rate, then phased combo compensation of hourly rate and commission as you move out of training and start building your customer base! Commission-based uncapped earning potential. First year earning potential: $50,000-$75,000 Long-term earning potential: $70,000-$150,000+ Are you hands-on, detail-oriented, and ready to learn a specialized skill that can lead to unlimited earning potential? Do you like working with customers and making things happen? Join our growing team as a Paintless Dent Repair (PDR) Technician and start a rewarding career—no experience required! What You’ll Do: • Travel to customer locations or work at an assigned site to repair minor dents and dings using on various vehicles using Dent Wizard’s proprietary PDR process, • Review completed work with customers, walk lots, write work orders, and negotiate approvals, • Build strong customer relationships and promote our services What We’re Looking For: • Strong communication and customer service skills to interact with clients and build relationships, • Self-motivation and the ability to work independently, • Toughness and grit to work outdoors in various weather conditions, • Manual dexterity for repetitive-motion tasks, • Physical stamina to kneel, bend, squat, and lift up to 50 pounds, • Valid driver’s license and a good driving record What We Offer: • No experience necessary – we provide comprehensive, paid training (6 weeks of hands-on and classroom instruction with travel and lodging included), • Unlimited, uncapped earning potential – the harder you work and the more you master your craft, the more you can make, • Excellent benefits, including medical, dental, vision, 401(k), paid vacation, and more, • Outstanding perks, including a company vehicle, gas card, mobile phone, tools allowance, branded clothing, and more, • Independence to manage your day – no micromanagement, • Variety of work on many types of vehicles, from new models to classics, • Supportive team environment with opportunities to grow your skills, • Career advancement into higher Tech levels (with more $) or management roles All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $21.00/hour Why Dent Wizard: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The compensation offered for this position will depend on qualifications, experience, and geographic location. The total compensation package may also include commission, bonus or profit sharing. Sign on bonus is subject to state and local laws, terms and conditions, including employment status and length-of-service requirements. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.

Consistent access to a smartphone.