Trabajos power engineer en Albany, New YorkCrear alertas

Job Title: Standard Cell / GPIO Design Engineer (2 nm Technology Node) Team: Enablement / Foundation IP Development Location: Albany (NY), Santa Clara (CA), or Tokyo (Japan) Overview Rapidus Corporation is developing next-generation semiconductor technologies at the 2 nm node and beyond. We are seeking skilled engineers to join our Foundation IP Design Team, focusing on Standard Cell and GPIO (General Purpose I/O) development. Engineers with expertise in circuit design, layout, reliability, or DTCO are all welcome. This position involves close collaboration with process, device, and enablement teams to deliver high-quality, high-performance IP that supports leading-edge logic technologies. Key Responsibilities • Design and optimize standard cells and GPIO circuits (input/output buffers, level shifters, ESD structures, and special cells) for advanced technology nodes., • Perform transistor-level circuit design and HSPICE simulations for performance, leakage, and robustness verification across PVT corners., • Collaborate with layout engineers to ensure design rule compliance, area efficiency, and manufacturability., • Work with process integration and DTCO teams to co-optimize transistor architectures, layout patterns, and reliability structures., • Support characterization and model generation for timing, power, and noise modeling., • Participate in ESD and latch-up design verification, ensuring compliance with foundry reliability standards., • Analyze silicon test results and feedback for model correlation and IP quality improvement., • Cooperate with EDA vendors and PDK teams to validate design enablement and sign-off flows. Required Qualifications • B.S. or M.S. in Electrical Engineering, Electronics, or Microelectronics., • 3+ years of experience in standard cell, I/O, or custom circuit design for advanced CMOS nodes (≤ 5 nm preferred)., • Strong understanding of CMOS device behavior, low-power design techniques, and circuit optimization., • Hands-on experience with EDA tools for schematic design, simulation, and layout verification (e.g., Cadence Virtuoso, HSPICE, Calibre)., • Familiarity with DRC/LVS/EMIR verification flows and reliability checks., • Strong problem-solving, analytical, and cross-functional collaboration skills., • Effective communication and documentation skills in English. Preferred Qualifications • Experience with nanosheet / GAA transistor architectures or FinFET-based IP design., • Familiarity with DTCO and library automation / QA flows (Python, TCL, etc.)., • Experience with test-chip development or IP qualification (Level-1 / Level-2)., • Knowledge of characterization tools (Liberate, SiliconSmart) and Liberty model validation., • Understanding of ESD protection, latch-up prevention, and pad ring integration., • Japanese language proficiency is a plus.

The Sales Engineer II is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align Siemens product and service offerings with current and future facility infrastructure needs. This position will focus on

We are seeking a Principal Research Engineer with deep expertise in power system modeling, simulation, and resilience. Experience serving as PI or technical lead on federally funded research projects. Serve as Principal Investigator (PI) or Task Lead for Department of Energy (DOE), Advanced Research

Join us to do the best work of your career and make a profound social impact as a Senior Systems Engineer on our Systems Engineering Team in. Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering)

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Annual Base Salary Range: $83k (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Senior Electrical Engineer BBS is currently seeking a Senior Electrical Engineer/Project Manager for the firm’s Albany office. This senior-level position is perfect for an independent professional who will be responsible for the day-to-day organizational, technical and production aspects for projects of varying types, complexities, scopes and budgets, and will be required to "shepherd" the project development process from conceptual design through substantial completion and final closeout. Working at BBS, you are part of a multi-disciplined firm with a wide range of consulting services located in-house, successfully delivering building and site projects for clients predominantly with K-12/higher educational backgrounds for over 40 years. With 75% of our valued staff being employed at BBS for over 10 years, and many for over 20 years, our vision is long term, and it includes the most talented individuals in the industry. At BBS you will contribute to a wide range of projects that help our clients understand the challenges placed before them today while connecting them to the future. We support a workplace culture that encourages innovation, creativity and camaraderie. BBS Architects, Landscape Architects & Engineers, P.C. is Long Island-based, ENR New York Top 100 design firm that continually strives for excellence in providing integrated architectural, landscape architectural and M/E/P engineering solutions to help our clients successfully plan, design, and build their projects. WHO ARE WE LOOKING FOR? We are looking for an ambitious and dedicated self-starter with extensive experience in the A/E/C environment. The selected candidate will be a licensed engineer with a minimum of 15 years of successful project management experience on K-12/higher educational and other type of projects. The candidate will also have successful experience with the direct management of employees including other Senior Engineers/Project Managers, project-level architects and engineers, technical designers, and a demonstrated success in winning new business. The candidate should have a dedication to the profession with a strong, self-driven desire to progress. DUTIES AND RESPONSIBILITIES: * • Independently manages projects from conceptual design through construction closeout, multiple at one time. Provides support on larger projects to other Senior Project Managers., • Leads in-house design teams of project engineers, project designers, technicians and outside consultants, and works well with Construction Managers and client representatives., • Assesses, understands and designs building engineering systems, i.e. building power, lighting, low-voltage systems and photovoltaic project systems., • Provides, coordinates and oversees production of construction documents and technical specifications for public bidding. Follows production schedules and is able to meet multiple simultaneous deadlines., • In charge of all Construction Administration on assigned projects including but not limited to adhering to public bidding procedures, Contractor submittal review and management, payment requisition review, attending project meetings, field visits, coordinating with multiple trades/contractors., • Delivers projects that comply with all applicable codes, standards and regulations., • Supports project administration activities including but not limited to staffing projections, time requirements, project fees, cost estimating, billing., • Applies quality, cost, and time control measures as necessary to ensure highest level of client satisfaction., • Supervises other project staff and technical teams of different disciplines, sizes, and skill-levels., • Bachelor of Electrical Engineering degree or equivalent., • 15 years of experience as a professional engineer (PE)., • Minimum 5 years of electrical design experience and minimum 10 years of project management experience in consulting environment., • Understand the process and workflow of an A/E project team, work within established cost budgets., • Excellent verbal, written and visual communication skills. Self-driven desire to grow professionally, independence, strong leadership and organizational skills, ability to set and adhere to goals. High-level time management capabilities, meet multiple simultaneous deadlines, delegate tasks, conflict mitigation, client interaction and negotiations, training of staff as needed., • Public presentation capabilities, travel/driving required, occasional night meetings., • High-level of proficiency in AutoCAD and MS Office. Knowledge of Revit advantageous., • Successful project track record in the local A/E/C industry within the Capital District, Hudson Valley, Mohawk Valley and Central New York regions. Experience in interacting with various level government agencies and municipalities is a plus., • Comprehensive, competitive compensation package., • Group health insurance, dental insurance, and vision insurance plans, • Health Care & Dependent Care Flexible Spending Accounts, • Company-paid group life insurance., • Supplemental life, spousal and dependent life and AFLAC plans available., • 401k plan., • Company-paid vacation starting and sick/personal time.

Job Description Position Overview: The Hampton Inn Western Ave is seeking an experienced Maintenance Technician! As part of the Maintenance team, this position performs all necessary repairs and preventative maintenance as directed by the Chief Engineer/Engineering Supervisor, to maintain a safe, attractive, and efficiently operated hotel. He/she is responsible for performing other duties as assigned. Job Responsibilities: As a Maintenance Technician, you will be responsible for giving our guests the best hospitality experience you can by: • Completes maintenance requests in a timely manner. Works on improvement projects and preventative maintenance programs as directed., • Performs Suite Care, to maintain suites for guest satisfaction., • Performs exterior property maintenance, such as carpentry repair, painting, and all other functions necessary to the facility., • Exhibits friendly, caring attitude toward guest and co-workers., • Consistently leaves maintenance slip in guest suite when work is completed., • Practices safety throughout work shift by removing/correcting and hazards identified., • On call (emergency) rotation and works close with the housekeeping department., • Maintain high standards of personal appearance and grooming, which include compliance with Company dress code and wearing a nametag when working., • Always maintain a professional and friendly demeanor., • Must always be attentive, courteous, and efficient in the dealings with guests, managers and all other employees., • Establish and maintain good communications and teamwork with fellow employees and other departments within the hotel., • Routinely communicate with the Housekeeping Manager and all other employees on issues of maintaining the property in excellent condition., • Communicate with other hotel staff to accommodate special guest requests., • Comply with compliance standards and regulations to encourage safe and efficient hotel operations., • Responsible for maintaining the physical structure and grounds of the hotel property in like-new condition, including landscaping, walkways, pool area and sport courts, as directed by Engineering Manager., • Assign or handle maintenance requests, improvement projects and develop preventative maintenance programs., • Must be able to use two-way radios, telephones, general office equipment and various types of maintenance equipment., • Follow compliance with company standards, safety rules, and health and sanitation regulations., • Previous hotel or related field maintenance experience is required., • A working ability with HVAC, electrical, plumbing, and carpentry is needed, and formal training in at least one of these disciplines is preferred., • English skills are required., • All state and local age and licensing requirements must be met prior to operating and handling any hand or power tools, torches, chemicals, etc., as well as for driving the hotel van., • Must have a valid driver’s license., • Long and flexible hours are sometimes required., • Must be able to work evenings, weekends, and holidays as needed., • Heavy work - Exerting up to 100 pounds of force occasionally, up to 50 pounds of force frequently and up to 20 pounds constantly to lift, carry, push, pull, or otherwise move objects., • Ability to stand during the entire shift., • Ability to reach overhead, utilize both hands, bend over, and stoop and kneel., • Must be capable of climbing and descending stairs during their shift., • Must be able to understand and follow directions, guidelines, and work objectives as set forth by the Engineering Manager., • Must be able to understand the potential hazards and subsequent procedures involved in working around commercial chemical agents and various types of machinery., • Must use common sense and integrity in ensuring the security of guest belongings while working in occupied suites., • Must be able to work in a self-managed and self-directed environment. Powered by JazzHR m8JMtnZQnh

Job Description Job Description We are seeking a Data Center Design Engineer to oversee new common system and infrastructure of installation / capacity augment projects. The candidate would be responsible for monthly common system capacity reporting for assigned facilities and day to day maintenance and PMs of assigned FirstLight facilities. This role has combined responsibility for data center process and compliance activities. The expectation is that the Data Center/Facilities engineer would oversee common systems, operations and maintenance of FirstLight facilities. They will coordinate projects with the Facilities Director, department managers and project managers. The duties listed require strict adherence to budgets and formal bid process. Job requirements include (but are not limited to): The main job function along with the facilities engineer responsibilities is to take a data center expansion project - designing, costing and construction of the new space. • Take a raw space and make it a colocation data center room., • Design, • Floor, • Ceiling, • Power, • Cooling, • Generator backup, • Switchgear, • Fire protection, • Bid process, • Construction, • Final turnup, • Responsible for maintenance and installation activities on major network infrastructure components, • Coordination and oversight of purchasing, installation, repair, and routine maintenance for each assigned facilities asset, • Coordination of internal resources, contractors/vendors for existing facilities and new construction, cabinet installations and service cross connections, • Monthly common system capacity reporting for assigned facilities, • SP Marketplace documentation of All Facilities / assets assigned, • Works with Network Design Engineering to facilitate clean SOW packages, Understands power and grounding, HVAC / UPS architecture fundamentals, • Network Facilities Technician must understand access procedures for all relevant sites under their area of operation, • Preventative maintenance / reporting for infrastructure components i.e., HVAC, Emergency Generators, transfer switching, remote gen set operation, maintenance, and interface connections, • Network Facilities Engineer has oversight of contract labor for end-to-end installation, test, turn-up, and maintenance of all infrastructure and common systems related projects, • Be available as Essential Personnel in emergency scenarios, • When necessary, assist Field Operations installation tasks, • Completes special projects and other duties as assigned, • Proficiency with SP Marketplace essential, • Basic understanding of test equipment i.e., Power/grounding / HVAC / UPS, all related / required testing equipment to conduct and troubleshoot the FirstLight infrastructure, • Ability to read and understand CLR’s, Floor plan diagrams and one line power diagrams, • Knowledge of inventory control protocols, • Experience in troubleshooting process [i.e. point to point analysis], • Knowledge of AC/DC power architecture and operational fundamentals, • Familiarity with industry standard installation practices [lacing and sewing, planning for network installations, ordering and gathering equipment, verifying and testing circuits, equipments and alarms] FirstLight, headquartered in Albany, New York, provides fiber-optic data, Internet, data center, cloud and voice services to enterprise and carrier customers throughout the Northeast connecting more than 13,000 locations in service with more than 125,000 locations serviceable by our more than 25,000-route mile network. FirstLight offers a robust suite of advanced telecommunications products featuring a comprehensive portfolio of high bandwidth connectivity solutions including Ethernet, wavelength, and dark fiber services as well as dedicated Internet access solutions, data center, cloud and voice services. FirstLight’s clientele includes national cellular providers and wireline carriers and many leading enterprises, spanning high tech manufacturing and research, hospitals and healthcare, banking and financial, secondary education, colleges and universities, and local and state governments. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight’s equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

Job Description *Applicants MUST submit a cover letter with resume to be considered. *This position will require in-office presence. Hybrid work schedules may be possible based on specific job duties and consistent with ESD policy. *Minorities, women, and individuals with disabilities are encouraged to apply. Please contact Human Resources if you require an accommodation. BASIC FUNCTION: Assist with the installation, configuration and maintenance of critical network infrastructure supporting ESD’s HQ, datacenter, and remote office locations. Assist in troubleshooting and resolving LAN and WAN related performance and equipment issues. Monitor and optimize network services and provide end user support for all network related devices and equipment. WORK PERFORMED: • Install, configure, maintain, and administrate network related infrastructure, services, equipment, and software necessary to support ESD’s critical business functions., • Rack, stack, power and provide management connectivity for network equipment., • Monitor and optimize the performance of enterprise SD-WAN and internet connectivity., • Install, configure, and manage Juniper network switch stacks and associated infrastructure., • Evaluate new and leading-edge network technologies for possible inclusion within the enterprise topology., • Liaise with third party vendors to manage new and upgraded services being implemented., • Utilize vendor portals to create, track and manage support and service tickets., • Assist with the management of ESD’s Active Directory Infrastructure., • Assist with the management of network file storage services in Azure NetApp Files (ANF)., • Assist with the management of Virtual Server workloads in Azure VMware Solution (AVS)., • Assist with the management of Horizon Virtual Desktop Infrastructure (VDI) in Azure., • Utilize network management best practices and monitoring tools to investigate and resolve network related performance issues., • Assist with integrating technologies from different vendors in a heterogeneous networking environment., • Support the installation, configuration and troubleshooting of IT infrastructure at ESD’s satellite offices., • Mentor junior networking staff and supervise network related projects as directed., • Travel to various remote office locations as necessary., • Assist in IT Disaster Recovery efforts, testing and documentation., • Perform other related duties as required by IT management. MINIMUM REQUIREMENTS: • Proven experience in Juniper network routing and switching or other routing and switching platform., • Proven experience in routing and switching command line experience., • Knowledge of SD-WAN infrastructure and management principles., • Familiarity with cloud computing architecture including virtual desktop, storage and backup/recovery., • Expertise with Enterprise wired and wireless network systems., • Familiarity with ISP management., • Experience with Network Monitoring Systems., • Expertise with Group Policy, DHCP and DNS management., • Ability to independently manage a project and coordinate with network and data center technicians., • Must be able to work under deadlines and in an environment where priorities shift., • Must be able to collaborate and coordinate across organizational disciplines (security, networking, procurement, Help Desk, etc.)., • Must be able to function as a team leader., • Strong verbal and written communication skills., • Ability to multi-task and deliver results within accepted timeframes., • Relevant Experience required: Experience in a Network Engineer role. Education Level Required: Education Level required: Bachelor’s degree in an IT related discipline with minimum of 3 years’ experience in related field; Or a 2-year degree with a minimum of 5 years’ experience; Or any equivalent combination of experience and/or education from which comparable knowledge, skills and abilities have been achieved. Knowledge & Skills Required Software / hardware: Juniper switches and routers, SD-WAN and ISP management experience, Microsoft Server operating systems (OS) 2016 - Current, Windows (OS) 10+, Cloud computing architecture, Active Directory management, EXSi, VOIP, SAN/NAS, Enterprise wireless solutions, Dell Server Hardware, Cat 6 cabling, UPS appliances, familiarity with VMware 7.0 + and VMware VDI solutions, Wyse thin clients, HP and Ricoh Printers. Ability to work with a diverse group of people at both a functional and technical level and communicate at a level appropriate to audience; Ability to work both independently and as part of a team; Strong written and verbal communication skills. Employee Relations: Role requires analytical and active listening skills; as well as the ability to multi-task and manage daily workload. Must work with end users at all levels of the organization.

Job Description We are seeking a Senior Electrical Engineer with a strong focus and background in Building Projects to work in our Poughkeepsie, NY or Albany, NY Office. This position will work closely with engineering staff to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents. Duties • Interact closely with mechanical, civil, structural engineers and project architects, • Function as lead electrical engineer for multi-discipline projects, through all phases (proposal, design, bidding and construction)., • Perform code reviews., • Delegate and monitor project tasks to junior team members., • Meeting with external and internal clients., • A Bachelor’s degree is required., • A minimum of 10 years of experience working at an A/E consulting firm is required., • New York State Professional Engineer’s license is preferred., • AutoCAD and Revit experience is a plus. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently looking for a Power Systems Engineer with a minimum of 5 years of experience in protection and control system design, power system analysis, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems and performing power system studies., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering, General Electric and Basler equipment. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Senior Electrical Designer- Solar PV, BESS & Microgrid Why This Role Matters: As a member of the BSE Team, the Senior Electrical Designer works with the design team to plan, design, and oversee the installation of building systems on a variety of project types. In this role, you will design building systems for projects across our practice areas, improving the built environment, and creating a more sustainable world in the process. As a member of the BSE team, you have developed a deep expertise in a building systems specialty and have experience in design coordination as part of a multi-disciplinary team. The Senior BSE Designer works independently on moderately to highly complex projects. What You’ll Do: • Perform Codes and Standards review. Discuss interpretation with Engineer of Record (EOR), if required, • Perform Revit drafting and comply with company standards, • Lead project design efforts and communicate with EOR, • Perform site investigations and document existing conditions, • Oversee the development of Revit drawings – plans, details, schematics, and schedules, • Attend internal coordination meetings and communicate with other disciplines, • Attend client meetings and participate in project scope development, • Communicate engineering concepts clearly with clients, • Prepare engineering reports and opinions of probable construction costs, • Perform building condition evaluations and prepare reports, • Produces designs that have minimal QA/QC comments and minimal drawing presentation mistakes, • Prepare specifications, • Ability to design within a construction budget, • Review and approve submittals and shop drawings, • Perform construction punch lists, • Attend construction meetings, • Assist CPL senior leadership with proposal efforts as required, • AS Degree required, professional degree in Electrical Engineering preferred, • A minimum of eight (8) years of experience, • Ability to perform difficult technical computations and consolidate acquired data, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines, • Familiarity with building systems such as HVAC, plumbing, power distribution, lighting and low-voltage systems, and structural components, • Working knowledge of Revit and other relevant design programs, • Proficient in utilizing Microsoft Office tools, • Strong verbal, written, and interpersonal skills, • Engineering, analytical, and technical writing skills with attention to detail, • An understanding of construction plans/specifications To regular full-time and part-time employees who regularly work 30 or more hours per week • Healthcare for you and your family: Medical, Dental& Vision insurance. Single HDHP Medical plan with 100% paid premium, • Health Savings Account (HSA) with employer match, • Medical and Dependent Care Flexible Spending Accounts, • Long-Term Disability Insurance Company/team member sharing, • FREE Life Insurance and AD+D Insurance + Voluntary Life Insurance for you and your family., • FREE Short-Term and Long-Term Disability Insurance., • PTO + Sick Time + 8 Holidays a year., • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Internal Mobility & Career Advancement. We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job Description Overview Now Hiring: Senior Analog Electrical Engineer Location: Albany, NY Schedule: Full Time What’s in It for You Compensation: $130,000 to $150,000 Benefits: • 401K with company match, • Medical, dental, and vision coverage with multiple plan options, • Employer-sponsored short-term disability insurance, • Additional voluntary benefits, • Employee Assistance Program (EAP), • Paid vacation, • 5 paid sick days annually (front-loaded), • 10 paid holidays, • Tuition reimbursement More than the sum of our parts — Vitrek is one company, driving innovation through a family of industry-leading brands — Vitrek, GaGe, and MTI Instruments enable breakthroughs in a variety of industries by delivering high-precision, easy-to-use test and measurement products that enable better quality, and the in-process collection of critical test data. From the development of life-saving vaccines to enhancing next-generation radar systems and providing precision non-contact wafer measurement Vitrek has been a key part of the systems needed to deliver the highest available precision. Behind our products is a team committed to helping our customers achieve the extraordinary. Improving product performance isn’t just about precision — it’s about making it simple to integrate precision into research, testing and compliance conformance in repeatable ways that improve productivity and production control. About the Opportunity Join Vitrek as a Senior Analog Electrical Engineer and play a key role in shaping the next generation of precision instrumentation. Based in our Albany, NY engineering center of excellence, you’ll lead system-level design initiatives while collaborating with a high-performing team of electrical and software engineers. This is an exciting opportunity for an experienced engineer who thrives in a hands-on environment and is passionate about delivering high-performance, low-noise analog solutions. You’ll report directly to the Vice President of Engineering and have the opportunity to influence both new product development and the evolution of our existing product portfolio. What You’ll Do • Lead analog and mixed-signal circuit design, including:, • Component selection, • SPICE simulation, • Schematic capture, PCB layout, and BOM development, • Debugging and validation, • Design and optimize circuits with a focus on low-noise performance and stability, • Conduct circuit performance testing and analysis, • Support legacy products and ongoing production efforts, • Provide application and technical support as needed, • BS or MS in Electrical Engineering from an ABET-accredited program, • 5+ years of hands-on experience in analog circuit design, • Strong experience with mixed-signal systems and debugging, • Eligibility to work in the United States, • Experience with low power switching inverters (<50W), • Design of low and ultra-low noise amplifiers (op-amps and discrete), • Audio amplifier design experience, • Active analog filter design If you’re excited about designing cutting-edge analog systems and want to make a real impact, we’d love to hear from you.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionField Service Engineer – Automated Food Processing Equipment Employment Type: Full-Time | Direct Hire Location: Albany, NY or Anywhere in New York State (Home-Based) Extensive Nationwide Travel Required Compensation: • Base salary: $95,000–$100,000 annually, • Significant overtime available, • Field pay incentives can raise effective hourly earnings to $40/hr.+ on customer sites Field Service Engineer Responsibilities: • Travel extensively to customer sites nationwide to support equipment installations and service calls, • Install, assemble, and commission automated food processing machinery, • Troubleshoot mechanical, electrical, and controls-related issues in the field, • Diagnose problems using blueprints, wiring diagrams, and technical documentation, • Perform controls troubleshooting, including work with Schneider hardware (no programming required), • Conduct MIG and stick welding as needed during installations or repairs, • Provide professional, customer-facing support at job sites, • Manage service calls efficiently while maintaining high safety and quality standards, • Strong background in industrial equipment and automation, • Proven ability to read and interpret blueprints, schematics, and wiring diagrams (required), • Experience working with industrial electrical systems and controls, • Electrical or controls-focused background strongly preferred, • Welding experience (MIG and stick) preferred, • Comfortable performing both installations and troubleshooting, • Willing and able to travel extensively (approximately 50–75%), • Able to work long days and extended hours during installs (overtime opportunities available), • Strong communication skills and professional customer presence, • Valid driver’s license and acceptable driving record, • Competitive base salary plus high overtime earning potential, • Field incentive pay for billable hours on customer sites, • Long-standing, stable company with a strong reputation in the industry, • Skilled, tight-knit field engineering team with long tenure, • Hands-on role working with advanced automated food processing systems #ZR #Recruitment2026Company DescriptionEthan Allen Workforce Solutions offers job seekers and employers the most complete, leading-edge employment services in the Hudson Valley. Whether you are looking for employment opportunities, quality employees or off-site personnel services such as payroll, employee benefits or risk management, we are experts in meeting the needs of workers and companies across the Hudson Valley!Ethan Allen Workforce Solutions offers job seekers and employers the most complete, leading-edge employment services in the Hudson Valley.\r\n\r\nWhether you are looking for employment opportunities, quality employees or off-site personnel services such as payroll, employee benefits or risk management, we are experts in meeting the needs of workers and companies across the Hudson Valley!

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Contract-to-hire role based in Philadelphia, PA, Newark, NJ, or Albany, NY areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job DescriptionSenior Veritas eDiscovery Platform (eDP) EngineerEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas eDiscovery Platform (eDP) Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas eDiscovery Platform (eDP) Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:Personnel assigned to this task must have the ability to adjust to changing priorities and work well under pressure. In addition, personnel may provide support along with OGC, to other FBI Divisions, such as CTD. At the Government’s discretion, available funding, and need this position will support Criminal Discovery Program. The Senior Veritas eDiscovery Platform is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed;- Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor Shall facilitate the migration of the system implementation into cloud infrastructures. - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Preferably in electrical or computer engineering. The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, p

Join our team as a Digital Hardware Engineer and play a critical role in advancing the next generation of embedded digital hardware supporting L3Harris Software Defined Radios (SDR) and accessories. Reporting to a Senior Engineering Manager, you will take ownership of the full hardware lifecycle—f

Partner with Construction Engineers, Engineering, Customers or Service Providers in developing/negotiating contract change orders, preparing invoices and coordinating construction sequencing and site outages, coordinate all field & design changes and quality testing/inspections. New York Power Autho

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

The L3Harris Communication Systems segment is seeking a highly motivated, team-oriented Electrical engineer experienced with Digital Design to join an engineering organization that designs and delivers leading edge communications products. L3Harris provides an inclusive, engaging environment designe

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Qualifications 5+ years of construction project management experience Bachelor’s degree in construction management, civil engineering, or a related field preferred Strong leadership, organizational, and communication skills Proficiency with MS Excel and project documentation Detail-oriented with t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Reporting to a Senior Engineering Manager, you will take ownership of the full hardware lifecycle—from conceptualizing high-level requirements to seeing your designs move through manufacturing and into the field. Compliance & Reliability Engineering:. Bachelor’s Degree in Electrical/Computer Eng

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Exposure to electronic circuit elements such as: ASICs, PLLs, DACs, Amplifiers and Power Supplies desirable. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. The individual will work closely with both the design engineering community a

JLL empowers you to shape a brighter way. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical,

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Bachelor's Degree in Civil Engineering required.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Informs, directs and trains engineers-in-training and less experienced project engineers relative to these. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering in electrical

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Personal Shopper] As a Grocery Delivery Driver at Shipt you will: Get paid to shop by filling customer orders and delivering to their door; Earn up to $22/hour* shopping for and delivering things people love from stores they trust; Set your own hours - part-time - full time - or any time; Be at leas

Why Become a Shopper with DoorDash?.Turn your shopping skills into extra income.Whether you’re helping someone stock up on groceries or delivering a last-minute convenience order, as a Shopper you unlock more earnings opportunities with DoorDash.Stay active during off-peak hours and no need to wai

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl