Trabajos power engineer en White Plains, New YorkCrear alertas

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Drafting Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in the FAA’s Jamaica New York Office. The candidate will support the FAA’s Engineering Services team by applying broad experience and advanced technical knowledge on multiple, varying, and complex assignments. It is necessary to plan, coordinate and perform work with a high degree of independence, while keeping the Project Engineer advised of significant problem areas. Primary Responsibilities: • Provide technical support to the Engineering Center, for the accomplishment of project engineering packages by developing site-specific project plans and specifications for solicitation and contracting of engineering projects for FAA approval and acceptance., • Perform site surveys to collect site-specific project data and research all (state, local, federal, FAA, etc.) standards, construction codes and ordinances., • Provide analysis, recommendations, and solutions to issues identified during the site survey., • Prepare summary trip reports within two working days of trip completion. Reports will include compiled and completed project documents as follows:, • Scope of work and project transmittal., • Drawing and specification lists., • Operational Risk Management checklists., • Furnish information required for the preparation of Purchase Requests (PR) for assigned projects., • Furnish information required for the preparation of NAS Change Proposals (NCP) for assigned projects., • List of Government furnished properties., • Prepare Airspace case documents., • Assessment of engineering impacts on Environmental & Safety Compliance Program Project checklists., • Drawings and specifications., • Engineering cost estimate for project plans per FAA Standard/guidelines., • Estimated completion time and project schedule., • Provide technical engineering support for all phases of assigned new construction and renovation projects (i.e., evaluate shop drawings, design proposals, and interpret the technical requirements for adherence to contract documents)., • Participate in Joint Acceptance Inspections (JAI) and Contractor Acceptance Inspections (CAI) on all assigned projects and provide recommended resolutions on all items relating to engineering., • Perform engineering studies for feasibility and cost versus benefit., • Develop project drawings in accordance with the FAA Standard/guidelines. Required Qualifications: • BS Degree in Engineering disciplines of Civil, Electrical, Architect and 2-4 years’ experience. Additional years of experience may be substituted for degree requirements., • Building Envelop Design., • Proficiency with AutoCAD/MicroStation., • Proficiency with Microsoft Office Suites., • Ability to Obtain a Public Trust Clearance., • Ability to Travel up to 10% Desired Qualifications: • Knowledge of Unstaffed Infrastructure Sustainment (UIS) facilities, • Knowledge of National Airspace System Equipment Tower (NASET), National Airspace System Equipment Building (NASEB), Heating Ventilating and Air Conditioning (HVAC), power, general building construction techniques, Hazardous Materials (HAZMAT)s, fire detection, security, site work, • Knowledge of shelters, roofing, and structures such as communication towers, Navigational Aids, and earthwork including roads and trenching., • Knowledge of Corporate Work Plan (CWP) 4.1.12 If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. June 26, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Securitas Technology, a global leader in integrated security solutions, is dedicated to helping make the world a safer place. With over 13,000 employees in 40 countries, we protect and empower businesses through a connected ecosystem of health, safety, and security solutions. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. We’re seeking a Technology Solutions Architect (TSA) to join our Engineering Center of Excellence. This role supports our sales Organization by developing repeatable, cutting-edge electronic security solutions tailored to client needs. Collaborating closely with sales leadership, the TSA plays a key role in shaping strategy, design, and technology support across regional and national teams. Primary responsibilities include: • Providing subject matter expertise to drive customer discussion on electronic security solution offerings, • Assist in coordinating communications and activities between the sales teams, local & regional field resources and the pre/post-sales engineering department, • Act as and be the systems integrations and field applications expert for the sales organization, • Directs and acts as a technology mentor for sales, costing, engineering, and field implementation, • Perform customer consultations, presentations, and demonstrations of identified technologies that fit the need for the customer’s solution, • Assist in Securitas events, and external tradeshow, such as, but not limited to GSX, ISC, NRF, RILA, and more Additional responsibilities include: • Conduct detailed field surveys for use in the design development and estimating of a customer’s solution, • Value engineer solutions to meet customer needs and support the sales operations teams to win, • Support costing & estimating engineers by developing, providing, and collaborating on bill of materials, scope of work, presales device placement drawings and subcontractor collaboration, • Assists in the preparation of sales proposals by providing pertinent technical information and reviews proposals for technical accuracy and adherence to product standards, • Advises and interacts with product management regarding product defects and provides customer input on suggested product improvements, • Support the field teams by selecting standard technology across installations. Where necessary, this includes supporting field installations with understanding of design and solution, • Provide insight and assist in the process of creating advanced plans when customers are migrating or implementing new technology. This includes technology selection, and project planning, • Support sales with technology related questions or scope. Help them understand what solution and strategy is required to accomplish a job, specification requirement and to win. This includes attending meetings, walk throughs and scope reviews Qualification and Education • 6+ Years’ experience in Electronic Security, • 5+ Years’ experience in designing Electronic Security systems (Intrusion Detection Systems (IDS), Access Control Systems (ACS), CCTV/ VMS (Video Management System, Visitor Management Systems, Intercom Systems), • Bachelor's Degree, or equivalent education and/or experience, • A valid state driver’s license, without restrictions, • Detailed knowledge of integrated electronic security solutions and design, • Some knowledge of Fire Alarm & Life Safety Code, • Working knowledge of Computer Systems & Networking, • Ability to read & interpret electronic security specifications, perform equipment counts (take off’s). Identify cable requirements & distances, as well as calculate power load & battery calculations., • Clear, professional communicator with the ability to engage effectively with internal teams and clients, • Self-motivated, detail-oriented, and deadline-driven Preferred Skills • Consultative sales process experience preferred, • Field Applications experience preferred, • Systems Integration experience preferred, • Physical Security Information Management (PSIM) and Global Security Operations Centers (GSOC) experience preferred, • Bluebeam and Visio experience preferred, • Knowledge of high security credentials such as iClass/DESFire & Personal Identity Verification (PIV/FICAM)., • Understanding / Certification with UL (681 & 2050) & High Security applications/systems., • Knowledge of Structured cabling / BICSI Certification / EIA/TIA-568., • Understanding of NFPA (National Fire Protection Association) code (Specifically in your assigned area) / NICET Certified. Additional Notes • Travel expected to be about 50% Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge and technology power our connected ecosystem of health, safety and security solutions and services. POSITION SUMMARY As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. SCOPE OF RESPONSIBILITY • Analyze and interpret blueprints, specifications, and scope documents for fire and security system projects., • Prepare detailed cost estimates for labor, materials, and equipment for alarm systems, CCTV, access control, and other low-voltage installations., • Conduct take-offs and identify potential value-engineering alternatives to reduce costs without sacrificing quality., • Collaborate with vendors and subcontractors to source competitive pricing., • Develop bid proposals, ensuring all required documentation is submitted on time., • Partner with sales and project management teams to ensure seamless project handoffs., • Maintain an up-to-date pricing database., • Keep current with changes in industry codes, technology advancements, and competitive practices. Qualifications • Minimum 5 years of experience estimating in the fire alarm and/or security/low voltage field., • Education BA Business/ BS Engineering/MS Engineering or applicable amount of experience in the appropriate field may be substituted for the educational background, • Strong understanding of relevant codes, including NFPA and NEC., • Ability to read and interpret detailed construction drawings and scope documentation., • Experience working with major manufacturers (e.g., Silent Knight, Firelite, Bosch, Hanwha, Avigilon, Axis, Genetec, Lenel, and others)., • High level of organization and accuracy with strong attention to detail., • Excellent communication and time management skills., • NICET Certification- Fire Alarm Systems Level III or higher, preferred., • Computer skills to include:, • MS Office, • Acrobat, • Visio, • DWG Writer, • Big Machines, • Sales Force dot com ESSENTIAL FUNCTIONS • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards., • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor, • Review of Field Site Survey documents and drawings., • Supports the RFI, RFP, RFQ and RFM&S process as needed, • Create estimates and budgets for access control, intrusion, CCTV, intercom, PSIM, PLC and structured cabling systems, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings., • Interpret specifications, addendums, revisions, sketches and Scope of work., • Work with project managers and design engineers for creating change orders on existing and ongoing projects., • Manage assigned projects and maintain deadlines for each project., • Build and maintain a good relationship with coworkers, suppliers and manufacturers., • Create a detailed list of clarifications, exclusions & compliance on a per project basis, • Knowledge of construction schedules, project meetings and how they pertain and impact the project., • Able to research product information utilizing the internet, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to navigate high value job environment for time lines, and compliance requirements, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Paid company training, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. ORGANIZATIONAL RELATIONSHIPS Closely work with together with the BIM Manager and system’s design engineers to provide 3D design aid throughout the project’s life cycle. Reports to Enterprise Systems engineering manager. SCOPE OF RESPONSIBILITY The Engineer is responsible for working closely with the BIM Manager and Systems Engineer to create a 3D model of the integrated security systems design submittal for approval by the customer or representative and in accordance with project specifications, drawings, codes, and regulations, manage and create the design submittal (drawings, bill of material, calculations, as-builts, etc.) and maintain the submittal during changes to the contract. Work within Security Technology systems group on the design and integration of security systems, access control, intrusion detection systems, communication, CCTV, Intercom systems, computer, and networking. Develop detailed design schematic and review 2D and 3D drawings for electronic and electrical products. This position will require working closely with project managers, design engineers, engineering specialists, manufactures, customers, engineering firms and other external experts. This position will require working in the Elmsford-NY office or the Fair Lawn-NJ office. Travel if might needed is less than 10% of the time. Job Requirements: ESSENTIAL FUNCTIONS • Basic working knowledge of Electronic Security Systems and features., • Creating Detailed 3D Models utilizing Revit, AutoCAD, and Navisworks to develop detailed 3D models of architectural designs., • Work closely with Design Engineers, architects, and other team members., • Updating and Modifying Models. As plans and specifications change, update and modify existing models accordingly., • Generating 2D Drawings and Details. Extract 2D drawings and construction details from 3D models., • Clash Detection and Coordination. Run clash detection analyses to identify conflicts or discrepancies between different building elements., • Attend Regular Project clash detection meetings and be prepared with clash reports to facilitate coordination meetings among project stakeholders., • Adherence to BIM Standards. Ensure that all models comply with project-specific BIM standards and protocols., • Maintaining BIM Libraries. Create and update BIM families within the project’s library., • Contributing to BIM Standards Development and actively participate in enhancing BIM standards and best practices within the organization., • Ability to handle multiple projects, schedule work and communicate effectively to peers. ADDITIONAL RESPONSIBILITIES • Be prompt, reliable, and on time in all aspects of your engagement while maintaining a high level of attention to detail and accuracy., • Perform any additional duties as required or assigned. SPECIAL KNOWLEDGE, SKILLS, AND ABILITIES • Security engineering experience is preferred but not a must., • BS in EE Engineering or equivalent is required., • Computer skills to include Revit, AutoCAD, Navisworks and MS Office., • Knowledge of ISO 19650 standards, • AC and DC circuitry, voltage drop calculations and wire sizing., • Basic knowledge of network and system security principles, not only in theory., • Executing enterprise engineering techniques., • Proven experience managing workload and pressure situations. Securitas offers comprehensive benefits including: • Company training and industry leading certification program, • Opportunity for annual merit pay increases, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. Securitas Technology specializes in centralized installation and service for enterprise and multisite security deployments, delivering consistency and reliability for the most robust security programs. At the Securitas Technology Engineering Center of Excellence (CoE), projects are designed, engineered, and commissioned to the highest industry standards to meet our clients’ unique needs. Responsibilities: • Lead a team of engineers and engineering managers in pre- and post-sales costing and design, focusing on physical security and integrated systems., • Conduct regular reviews of the engineering backlog to ensure timely and budget-compliant project completion., • Perform engineering resource planning to align resources and skillsets with sales and operational targets, particularly in the areas of physical security and access control systems., • Implement effective measures and processes for recruiting and retaining engineering staff with expertise in security technologies., • Oversee the development and implementation of design and manufacturing standards for engineering and pre-fabrication, ensuring compliance with industry standards such as UL 294 and NFPA 731., • Lead client tours at the Engineering Center of Excellence in Elmsford, NY, showcasing advanced security solutions and engineering capabilities., • Establish goals and targets for engineering staff and generate reports to measure performance against these objectives., • Oversee training programs for engineers, with a focus on the latest security technologies and industry best practices., • Manage resource allocation on projects based on individual engineers' skill sets, particularly in areas such as video surveillance, intrusion detection, and access control. Skills/Abilities: • Comprehensive knowledge of design/build engineering processes and construction submittal packages, with a focus on physical security systems., • Extensive technical expertise in engineering and physical security standards, including knowledge of IP-based security systems and cybersecurity principles., • Superior managerial and supervisory skills., • Strong analytical and problem-solving capabilities., • Proficient in financial analysis and data interpretation., • Exceptional resource management skills., • Proficient in using AutoCAD, BlueBeam, and Revit design tools., • Proficient in Microsoft Office Suite, SharePoint, and Microsoft Teams. Education and Experience: • Bachelor’s degree in Engineering required; Master’s degree in Engineering or Business Administration preferred., • Licensed Professional Engineer (PE) preferred., • Minimum of ten years of relevant experience required, with a focus on physical security and integrated systems. We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description JOB TITLE: Senior Electrical Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $130,000 - $175,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Senior Electrical Engineer will play a critical role in the architecture, design, development, and integration of electrical systems for Clarapath’s advanced electro-mechanical medical devices, SectionStar™ and TrimStar Pro™. This role is responsible for leading PCB design and review, developing wiring and harness schematics, designing robust power and control systems, and supporting embedded hardware components while ensuring seamless integration across mechanical and software subsystems. The ideal candidate brings deep expertise in hardware electrical design, a strong understanding of embedded systems, and the ability to drive technical decisions from concept through production. We’re looking for a hands-on, detail-oriented engineer who thrives in a fast-paced environment, mentors junior engineers, and views electrical engineering as a core driver of innovation, reliability, and scalability in medical device development. Responsibilities: • Lead the design, development, and validation of electrical systems for complex electro-mechanical medical devices, • Own PCB design and review, including schematic capture, component selection, layout oversight, and design for manufacturability (DFM), • Design and document wiring diagrams, cable assemblies, and electrical harnesses, • Develop and support power distribution, control systems, and signal integrity solutions, • Collaborate closely with mechanical, software, firmware, manufacturing, and quality teams to ensure seamless system integration, • Support embedded hardware development and interface with firmware/software teams on requirements and debugging, • Drive electrical design through prototyping, testing, verification, and production release, • Troubleshoot and resolve electrical issues at the system, board, and component levels, • Author and maintain technical documentation, including schematics, test plans, reports, and design history file (DHF) artifacts, • Ensure designs comply with applicable safety, EMC, and regulatory standards for medical devices, • Mentor and provide technical guidance to junior electrical engineers, • Support supplier selection, vendor communication, and design reviews with external partners Qualifications: • Bachelor’s degree in Electrical Engineering or a related field (Master’s preferred), • 7+ years of professional experience in electrical engineering, preferably within medical devices, robotics, or complex electromechanical systems, • Strong expertise in analog and digital circuit design, • Proven experience with PCB design tools and electrical CAD software, • Solid understanding of embedded hardware systems and interfaces (MCUs, sensors, motors, power electronics), • Experience designing power systems, motor controls, and low-noise signal paths, • Ability to read, create, and review schematics, wiring diagrams, and technical drawings, • Hands-on experience with lab equipment and electrical debugging, • Familiarity with design controls and regulated product development environments, • Excellent communication skills and ability to collaborate across disciplines, • Experience in FDA-regulated medical device development, a plus, • Knowledge of IEC/UL safety standards and EMC compliance testing, a plus, • Experience supporting products from early R&D through manufacturing scale-up, a plus, • Exposure to firmware development or scripting for hardware testing, a plus Company Offers: • Competitive salary will be commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays)., • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Power Studies Engineer - Critical Facilities - White Plains, NY / Remote Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will have the opportunity to partner with all levels of engineering and design staff to develop power studies for projects once design has been completed. Design projects are primarily focused around critical power systems for new data centers and expansions to existing data centers in the hyperscale / colocation markets. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. This person will work as part of the Engineering Team and interact closely with organizational leadership to complete Power Systems Studies. Working and communicating with internal team and clients effectively while following company's guidelines with company's goals, objectives and values in mind. Responsibilities: • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Execute and lead design teams and designs of complex scope, and coordinate activities of other personnel as needed, • Mentor engineers and assist with training and development to create a learning and growing environment, • Lead Power Systems Studies focused in the mission critical data center industry, • Independently perform Power System Studies for mission critical data center projects, • Evaluate Equipment: Assess equipment capabilities, ratings, and conditions (transformers, circuit breakers, capacitors, etc.); Determine if Equipment meets system requirements, • Lead efforts: proposal development, training / mentoring, and development of standards / automations to improve deliverables, • Conduct Power Systems Studies and produce reports along with final deliverables including breaker settings tables, TCC's, and arc flash labels, • Load Flow Studies: Analyze current and future system load to ensure power delivery without overloading components, • Short Circuit Analysis: Evaluate potential fault conditions to determine the system's response and ensure that equipment ratings are not exceeded, • Protection Coordination: Study the settings of protective devices such as relays, circuit breakers, and fuses to ensure they coordinate correctly and provide optimal protection, • Arc Flash Analysis: Conduct studies to determine potential arc flash hazards, calculate incident energy, and recommend safety practices and protective equipment, • Transient Stability Analysis: Evaluate the power system's ability to maintain synchronism after large disturbances, such as faults or sudden changes in load, motor starting, etc., • Develop proposals including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc. Qualifications: • 5-10+ year's Electrical Engineering experience, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Possess advanced knowledge of electrical topologies associated with mission critical facilities, • Experience designing electrical power systems for complex data center/mission critical facilities, • Experience with Protective Devices: relays, circuit breakers, and fuses with knowledge of how they function, what versions and device settings, • Understand ratings, capabilities, and conditions of various power system equipment, • SME of industry and safety standards related to power systems, with emphasis related to arc flash hazards and other safety-related matters, • Understand effects and requirements of connecting new generation or loads to existing systems, • Power system simulation software with one of the following: ETAP, PSS/E, SKM, Easy Power, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Skilled at reviewing design drawings and equipment submittals, • Perform code analysis including selection of equipment, wiring, etc. to meet code requirements, • Conduct code analysis and possess advanced knowledge of electrical codes, • Analyze and prepare documents, reports and correspondence, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • Previous experience in the Military / Military Veterans a huge plus!, • Minimal Travel: 10-20% Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: p77t1xk1qim8usuxfxiqiq7t9a@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionMulti-discipline engineering firm in business for decades is looking for an Electrical Discipline Engineer for their White Plains office! Job Responsibilities: • Design electrical systems such as lighting, power distribution, stand-by power generation, communication, fire alarm and security systems, • Manage a group of Electrical Engineers in project design and development tasks such as drawings, calculations, cost estimates, and specifications, • Respond to client questions and comments, • Review contractor submittals and provide clarifications during construction, • Review electrical department design documents for completion, • Ensure department personnel adhere to accepted industry and company standards, • Assist in the development of company quality standards and procedures, • Work closely with management and electrical department leadership to develop and implement electrical short- and long-range manpower and production plans to meet project objectives, • Assist in business development initiatives to pursue new projects including participation in client presentations Requirements: • BS in Electrical Engineering from an accredited program, • 10+ years’ experience with a consulting engineering firm designing building power, communication systems, lighting, and security systems, • Extensive knowledge of the architectural and engineering industry, including the Federal, State, and local laws and regulations that pertain to the industry, • P.E. license, • LEED Accreditation, • Knowledge of AutoCAD, EasyPower, and Revit desired, • Supervisory experience, • Experience with HVAC and plumbing systems a plus Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • Update and maintain shop drawing and RFI log Qualifications: • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Proficient in design and calculation software MS Office: Excel, Word, Project, PowerPoint, Teams SKM Powertools, EDSA or ETAP experience is desirable • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.)Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xecygz66zc6wx6iraifwhhi5ha@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Who We Are and Why Join Us At OnMed our purpose is simple but powerful...to improve the quality of life and sense of well-being in our communities by bringing access to healthcare to everyone, everywhere. Our path to everywhere has already begun, with our innovative CareStation, a small but mighty, Clinic-in-a-Box, bringing #healthcareaccess anywhere with an outlet to plug it in. Poised to become a key component in America’s public health infrastructure, the OnMed CareStation is the only tech-enabled, human-led, hybrid care solution that combines the comprehensive experience, trust and outcomes of a clinic, with the rapid scalability of virtual care. At OnMed, every role, every day, is directly impacting the communities we serve. You’ll join a high-performing purpose-driven team, innovating to break down the barriers that keep people from the care they need. This is not just a job… it’s a movement to bring healthcare where and when people need it most. It’s healthcare that shows up. Who You Are You are a senior-level Data Engineer and integration architect experienced in designing and scaling enterprise data platforms in cloud-first environments. You bring deep expertise in Databricks and Microsoft Azure and have led the architecture, optimization, and governance of modern data ecosystems. You think beyond pipelines – you design resilient, scalable data platforms that power analytics, interoperability, and operational systems. You are comfortable operating at both the strategic architecture level and the hands-on engineering level. You thrive in high-growth environments and are motivated by leveraging data to expand access to quality healthcare. Role Responsibilities Enterprise Data Architecture & Platform Ownership • Architect, design, and scale enterprise-grade data solutions using Databricks and Azure cloud services., • Own and evolve the Databricks environment, including performance optimization, cost management, governance, and security controls., • Define long-term data architecture strategy aligned to business growth and healthcare compliance, and the evolution of OnMed’s CareStation and HomeStation platforms., • Establish data modeling standards, metadata management practices, and scalable ETL/ELT frameworks. Integration Architecture & Interoperability • Serve as lead integration architect across all system interfaces and API-driven data exchanges., • Design and optimize integration patterns using Azure Data Factory, Azure API Management, and event-driven architectures., • Ensure reliable, secure, and scalable interoperability between internal systems, third-party platforms, and healthcare data sources – including HL7/FHIR-based integrations with EHR and clinical systems., • Oversee monitoring, observability, and fault tolerance across all integration touchpoints. Data Engineering & Pipeline Development • Build and optimize high-performance, scalable data pipelines in Databricks using Python and SQL., • Design and implement advanced data transformations and complex query optimization., • Implement automated testing, validation frameworks, and data quality controls to ensure pipeline reliability., • Drive CI/CD practices and infrastructure-as-code principles for data platform management. Governance, Security & Compliance • Establish and enforce data governance standards using Databricks Unity Catalog, including lineage tracking, auditing, and role-based access controls., • Ensure compliance with healthcare data privacy and security regulations including HIPAA, HITRUST, and SOC 2 requirements., • Implement role-based access, encryption standards, and secure API management, and access controls for PHI/PII data handling. Cross-Functional Leadership • Partner with BI, analytics, product, and engineering teams to translate business needs into scalable data solutions., • Provide architectural guidance and mentorship to junior engineers and analysts., • Influence data strategy at the leadership level through proactive recommendations and roadmap planning., • Communicate technical concepts clearly to non-technical stakeholders including clinical, operational, and executive audiences. Knowledge, Skills & Abilities • Experience operating in regulated industries; healthcare (HIPAA, HITRUST, SOC 2) strongly preferred., • Deep expertise in Databricks: Delta Lake, Unity Catalog, performance tuning, cost optimization, job orchestration., • Advanced knowledge of Azure services including Azure Data Factory, Azure API Management, Azure Storage, and related cloud infrastructure., • Strong proficiency in SQL (complex query optimization, performance tuning, indexing strategies) and Python; working knowledge of C# a plus., • Extensive experience designing scalable ETL/ELT frameworks and data warehousing solutions., • Experience implementing event-driven or API-based integration architectures., • Familiarity with healthcare interoperability standards (HL7, FHIR) is a strong advantage., • Proven ability to balance architectural vision with hands-on execution., • Strong communication skills with the ability to influence technical and non-technical stakeholders at all levels., • Demonstrated ability to mentor engineers and drive engineering best practices across a team. Requirements Education & Experience • Bachelor's degree in Computer Science, Information Technology, or a related field., • 7+ years of progressive experience in data engineering, data architecture, or enterprise integration. Benefits Benefits OnMed provides a competitive salary and benefits package, including unlimited PTO and paid holidays. The base salary range for this role is up to $170,000 commensurate with the candidate's experience, plus an annual discretionary performance bonus. OnMed is a proud equal opportunity employer. All qualified applicants will be considered without regard to race, color, creed, religion, gender, sexual orientation, national origin, genetic information, disability, age, marital status, veteran status, or any other category protected by law. #LI-HYBRID

Job Description At Wilson Elser, we are redefining what it means to work at a national law firm. With more than 1,400 attorneys across 46 offices nationwide, we are recognized among the top 100 law firms by The American Lawyer and ranked #36 in the National Law Journal's survey of the nation's largest law firms. Our continued success is built on a culture of collaboration, innovation, client service, and mutual respect. We are committed to fostering an environment where employees are empowered to grow their careers, contribute meaningfully, and thrive professionally. Our firm is committed to attracting and retaining professionals who value each other and the service we provide by embracing Teamwork, Collaboration, Client Service, and Innovation. If you are a motivated professional looking for a long-term fit where you can grow in a role, and will be valued and empowered, then we invite you to apply to our Data Analyst position in our White Plains, NY Office. This position offers a flexible, hybrid working arrangement. The Position This hands-on Data Analyst position will reside within the Firm's Business Solutions & Innovations department, where 20+ years of legacy technology and business processes are undergoing a complex and strategic overhaul, focused on efficiency, sustainability and providing a competitive industry advantage. Key Responsibilities: • Create and maintain reporting processes to support firm stakeholders, • Develop an understanding and knowledge of databases supporting firm operation, • Utilize Power BI Analysis Services for data visualization and reporting, • Leverage Aderant Database & Software for financial systems reporting, • Perform initial analysis and refinement of data, • Effectively communicate with internal/external resources, • Respond to ad hoc data requests, • Effectively analyze, reverse engineer, and document legacy scripting routines Qualifications • 1-3 years of Experience in Financial Systems Administration, • 1-3 years of recent Experience with Aderant Financial System, • Demonstrated Ability to Managing Data & Performing Data Analysis, • Working Knowledge Power BI Analysis Services, • MS SQL/SSRS/SQL Query skills required, • Exceptional MS Excel understanding, ability to debug, and develop a must, • VBA/Macro understanding and ability to debug are preferred skills, • Familiar with using JIRA software or comparable software for project and task management, • Excellent analytical and problem-solving skills, • Multi-tasker with ability to successfully manage numerous projects and tasks concurrently, • Strong oral communication skills, • Ability to draft succinct, informative, and accurate reports and recommendations, • Organizational skills to manage toward deadlines and deliverables, • Experience leading the transition, integration, and implementation of legal e-billing platforms a plus, • Knowledge of Sequel Viewpoint Systems a plus, • Prior industry experience with mid to large sized Law Firm(s) a plus, • Bachelor's degree (preferably in a Computer Science or related field), or substantial industry experience/expertise Wilson Elser offers a competitive salary and benefits package designed to support our attorneys both professionally and personally. A variety of factors are considered in making compensation decisions, including but not limited to experience, education, licensure and/or certifications, geographic location, market demands, other business and organizational needs, and other factors permitted by law. Final salary wages offered may be outside of this range based on other reasons and individual circumstances. This position is considered full-time and therefore qualifies for benefits including 401(k) retirement savings plan, medical, dental, vision, disability, and life insurance. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. Salary Range: $80,000—$90,000 USD Why Should You Apply? • Benefits: Outstanding benefits package, including 401k match and generous PTO plan, • Career Growth: Ample opportunities for professional development and advancement, • Employee Perks: Access to corporate discount plans and other benefitsWilson Elser welcomes submissions of candidates for our open positions exclusively from recruitment agencies with an active, signed fee agreement who have been granted access to a position through our dedicated Recruitment Agency Portal. We are unable to consider submissions from recruitment agencies without a current (dated as of 7/1/2024) agreement in place. We appreciate your understanding. For collaboration inquiries or to establish an agreement, please contact us at talentacquisition@wilsonelser.com.Wilson Elser is committed to a collegial work environment in which all individuals are treated with respect and dignity. It is the Firm's policy that employment will be based on merit, qualifications, and competence. Further, employment decisions will be made without regard to an applicants race, color, age, sex, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation or preference, gender identity, physical or mental disability, status as a victim of domestic violence, sex offenses, or stalking, past or present service in the uniformed services or application or obligation to serve in the uniformed services, or any other characteristic protected by law. Wilson Elser endeavors to make the Wilson Elser website accessible to any and all users. You may review our Accessibility Policy here.California Residents may review our CCPA notice for applicants and employees here.#ZR

Job DescriptionA multi-discipline engineering firm with over 70 years in business is looking for a Senior Electrical Engineer for their White Plains, New York office! Responsibilities: • Design electrical systems (power distribution, stand-by power generation, lighting, communication, fire alarm, security systems), • Manage team of electrical engineers in a variety of project design and development tasks:, • drawings, • calculations, • cost estimates, • specifications, • client communication, • contractor submittal reviews, • Review design documents, • Assist with business development initiatives, • Mentor/train junior staff Requirements: • B.S. degree in Electrical Engineering from an accredited program, • 5+ years of consulting experience (designing building power, lighting, communication and security systems), • Experience with HVAC and plumbing systems preferred, • PE License, • Extensive knowledge of the architectural/engineering industry (Federal, State, and local laws/regulations), • Experience using Outlook and Microsoft Office (or similar software), • LEED Accreditation, • Working knowledge of AutoCAD and Revit preferred Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Are you a Level 3 / Tier 3 network support engineer interested in data science and autonomous infrastructure? Our client is building vertically integrated networking systems and using the data they generate to power the next generation of AI-driven infrastructure.They’re looking for engineers expe

Are you a Level 3 / Tier 3 network support engineer who also enjoys scripting or programming — and is curious about how data powers intelligent systems? Our client is building vertically integrated networking systems and leveraging the data they generate to power the next generation of autonomous

Dean is headquartered in Tysons, Virginia, and employs more than 7,000 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Dean? Our people are inspired by the way eng

The New York Blood Center is seeking a Senior Data Engineer for its Tetris team to design and deliver complex data solutions that power analytics and AI capabilities.This role emphasizes data pipeline architecture using SQL, Python, and Azure technologies, while mentoring engineers and ensuring plat

New York Power Authority is seeking an Associate Data Engineer to join its Data Engineering team. You will work on building and maintaining scalable data pipelines, supporting enterprise analytics and AI initiatives, and collaborating with talented engineers to improve data systems. This role combin

This role involves executing structural engineering tasks for substation components and requires a Bachelor's degree in Civil or Structural Engineering along with 5+ years of experience in high voltage projects. A leading engineering firm is seeking a Substation Project Structural Engineer in White

Dean is headquartered in Tysons, Virginia, and employs more than 7,000 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Dean? Our people are inspired by the way eng

Job Description Software Engineer - hedge fund in Greenwich, CT **if interested please send a resume to: rick@ingenium.agency Position Summary: We are seeking a skilled and motivated Associate, Developer to join our team. The successful candidate will be responsible for automating and streamlining our operations and processes, building and maintaining tools for deployment, monitoring, and operations, and troubleshooting and resolving issues in our development, test, and production environments. Responsibilities: Infrastructure and Automation · Develop and maintain automation scripts and tools to manage infrastructure. · Design, implement, and manage continuous integration/continuous deployment pipelines to enable rapid software development and deployment. · Set up and maintain monitoring and logging solutions to ensure system performance, reliability, and availability using tools. · Collaborate effectively across teams to streamline repetitive tasks. · Implement and manage security best practices, including vulnerability assessments, patch management, and incident response. · Troubleshoot and resolve issues in development, test, and production environments. · Analyze system performance and identify bottlenecks; recommend and implement performance improvements. Required Skills & Experience: · Bachelor’s degree in Computer Science, Information Technology, or a related field, or equivalent practical experience. · A minimum of four years of experience as an Associate Developer or in a similar role. · Background working with vendor-provided API's. · Scripting skills in languages such as Python, SQL, or PowerShell. · Knowledge in Microsoft Excel and VBA. · Working knowledge of AI tools and platforms, with the ability to apply them effectively in day-to-day workflows. · Demonstrates a general understanding or curiosity about financial markets, stocks and broader business trends. · Strong problem-solving and troubleshooting skills. · Excellent communication and collaboration abilities. · Self-motivated and eager to learn. · Strong work ethic and high level of professionalism and integrity · Ability to work in a fast-paced, dynamic environment and handle multiple tasks concurrently. · Experience with Power Automate. Preferred Qualifications: · Proficiency with automation tools. · Familiarity with containerization and orchestration tools. · Experience with monitoring and logging tools (e.g., Prometheus, Grafana, OpenTelemetry). · Background working with Redis and/or Hashi Corp Vault. · Comfortable working across Windows and Linux environments. About us: We are a private investment management company in operation for over 25 years, investing in global multi-industry public markets, through long-only, long and short, and private investment strategies. We currently manage approximately $18+ billion in assets across its various strategies. We have two offices, in Greenwich, Connecticut and in New York City. The firm employs a team comprised of approximately 100 employees. We provide comprehensive benefits to support our employees, their careers, their health, and their well-being, including the following: · Competitive compensation structure · Fully paid health care benefits for employees and dependents · Generous parental and family leave policies · Paid vacation and sick time · Mental and physical wellness programs · Tuition assistance · A 401(k) savings program with a generous employer match