Trabajos quality supervisor en Rochester, New YorkCrear alertas

Job Description Job Description Summary The Lead Electrician Operates, maintains and repairs distribution and emergency power systems. Installs, maintains and repair electrical wiring and switch distribution panels and outlet boxes. Perform conduit installation, wiring and equipment. Job Description Essential Functions • Provide a high level of expertise in maintaining the facilities critical electrical equipment. (I.e. emergency generator, high and low voltage panel board networking systems)., • Analyze project electrical needs and determine design., • Maintain hand and power tools in working order., • Carry out preventative maintenance program on a wide variety of complex electrical equipment., • Layout and install power circuits in operational sequence, and make all required electrical calculations, such as kilowatt draw and power circuit phase., • Maintain automatic controls, switchboard distribution centers, lighting circuits and flood lights., • Troubleshoot, tear down, disassemble, rewire, adjust, repair and replace electrical apparatus., • Make standard computation relation to load requirements of wiring and electrical equipment., • Respond to all types of electric emergencies., • Detect and report improper operation, faulty equipment, and unusual conditions., • Maintain work area in a clean and safe condition. Comply with CWS and OSHA Policies and Regulations., • Perform other duties as required., • Ensures assigned work tasks meet quality standards., • Promotes the development of quality improvements through the initiation of process improvements. Requirements • High School / Technical School Diploma / Military Trained Electrician, • Electrician License from local jurisdiction, • Must be well versed in the electrical codes and theory, • Minimum of five years working as an electrician, • Computer aptitude working with CMMS and BMS computerized systems, • Ability to read schematics, job instructions, and general correspondence, • Candidates must be able to successfully pass a background check, including criminal history., • C&W Services is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status or any other characteristic protected by law. This list is representative of those duties and responsibilities that are required of this position. However, the list is not to be considered as all inclusive. A supervisor or manager may assign other duties to meet mission requirements of CW Services and cooperation of all personnel is expected to carry out the mission. REQUIRED PHYSICAL ABILITIES Electrical work by its nature requires physical abilities to include lifting up to 50 lbs regularly. Full dexterity is required including bending, kneeling, twisting, fine motor skills with hands and fingers, full rotation of the head and neck. Ability to see, hear and be alert while operating equipment. Ability to operate lift equipment at heights of up to 45 feet and perform work safely utilizing extension and step ladders. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $31.00- $36.00 hourly \nCompany Description We manage all aspects of facility services for a client. We manage all aspects of facility services for a client.

Job DescriptionWe are a growing HVAC contracting company specializing in new construction installations, complete system replacements, HVAC redesign projects, service repairs, and preventative maintenance. We pride ourselves on quality workmanship, professionalism, and providing energy-efficient comfort solutions for our customers. We are seeking a skilled HVAC Installation & Service Technician to join our team. This role is primarily focused on new system installations, equipment replacements, and redesigning existing HVAC systems, while also supporting service and maintenance operations as needed. Responsibilities • Install heating, cooling, ventilation, and indoor air quality systems in new construction and existing buildings., • Remove and replace outdated HVAC equipment., • Modify and redesign ductwork and HVAC layouts to improve system performance and efficiency., • Perform startup, testing, balancing, and commissioning of HVAC equipment., • Diagnose and repair HVAC system issues when required., • Conduct preventative maintenance on residential and light commercial systems., • Ensure all work complies with local codes, manufacturer requirements, and company quality standards., • Communicate professionally with customers, contractors, and team members., • Complete job documentation and maintain accurate records. Qualifications • 2-5 years of HVAC installation experience preferred., • Experience with new construction, retrofits, and system replacement projects., • Ability to layout and install ductwork and equipment., • Valid driver's license with a clean driving record., • Strong mechanical aptitude and troubleshooting skills., • Ability to safely use hand and power tools., • Ability to lift 50+ pounds and work in attics, crawl spaces, rooftops, and construction environments. Preferred Qualifications • NATE Certification., • Experience with residential and light commercial projects., • Sheet metal fabrication experience., • Experience with heat pumps, high-efficiency furnaces, and VRF/mini-split systems. What We Offer • Competitive wages and overtime opportunities., • Steady year-round work., • Health insurance and retirement benefits., • Paid holidays and vacation., • Company vehicle negotiable, • Opportunities for advancement into Lead Installer or Project Supervisor roles.

Job Description Job Title: Repair Table Operator/ Titulo profesional: Operador de Mesa de Reparación Division: General Labor / Division: Trabajo General Department: Operations / Departamento: Operaciones Reports To: Shift Supervisor / Reportar a: Supervisor de Turno Summary: Repairs pallets using quality specifications by performing the following duties. Resumen: Reparar las paletas utilizando las especificaciones de calidad mediante la realización de las siguientes funciones: Duties and Responsibilities include the following. Other duties may be assigned. Funciones y Responsabilidades incluyen lo siguiente. Otras funciones pueden ser asignadas. 1. Operates repair equipment per standard operating procedures.* Operar equipo de reparación de acuerdo con los procedimientos operativos estandar.* 1. Meets production quotas within a reasonable training/retraining time period.* Cumplir con las cuotas de producción dentro de un entrenamiento razonable/ periodo de tiempo para re-entrenamiento.* 1. Ensures housekeeping of equipment and surrounding area is acceptable per standard operating procedure.* Asegurar la limpieza de los equipos y el área de los alrededores es aceptable por procedimiento operativo estándar.* 1. Follows safety standard operating procedures and maintain proper use of all personal protective equipment at all time of operation.* Seguir los procedimientos operativos de seguridad estándar y mantener el uso correcto de todos los equipos personales de protección en todo momento de la operación.* 1. Generates accurate production reporting for supervisor.* Generar informes de producción precisos para el supervisor.* 1. Maintains possession and good condition of assigned tools and nails.* Mantener posesión y la buena condición de herramientas y clavos asignados.* 1. Alerts supervisor of potential maintenance and/or safety concerns.* Alertar al supervisor de problemas potenciales de mantenimiento y/o de seguridad.* 1. Receives and follows designated job processes and safety trainings.* Recibir y seguir procesos designados de trabajo y entrenamiento de seguridad.* 1. Performs assigned preventive maintenance of equipment.* Llevar a cabo el mantenimiento preventivo de los equipos asignados.* 1. Performs other related duties as assigned. Realizar otras tareas afines que le sean asignadas.* Qualifications: / Cualificaciones To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Para realizar este trabajo con éxito, un individuo debe ser capaz de realizar cada función esencial satisfactoriamente. Los requisitos enumerados a continuación son representativos de los conocimientos, destrezas y/o la habilidad necesaria. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad llevar a cabo las funciones esenciales. Language Ability: / Habilidad de Lenguaje: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Habilidad para leer y comprender instrucciones simples, correspondencia corta, y notas. Habilidad para escribir correspondencia simple. Habilidad para presentar con eficacia la información en uno – a – uno y grupos pequeños de situaciones para los clientes, clientes y otros empleados de la organización. Math Ability: /Habilidad de las Matemáticas: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Habilidad para sumar, restar, multiplicar, y dividir en todas las unidades de medida, usando números enteros, fracciones comunes, y decimales. Habilidad para calcular tarifas, relación, y el porcentaje y dibujar e interpretar graficas de barras. Reasoning Ability: / Habilidad de Razonamiento: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Habilidad para aplicar sentido común y el entendimiento para llevar a cabo detallado pero no involucrado instrucciones escritas u oral. Habilidad para bregar con problemas envolviendo algunas variables concretas y situaciones estandarizadas. Education/Experience: / Educacion/ Experiencia: High school diploma or general education degree (GED); or equivalent combination of education and experience. Diploma de Escuela Secundaria o un grado en educación general (GED); o una combinación equivalente de educación y experiencia. Equipment: / Equipo: • Hammer / Martillo, • Nail gun / Pistola de clavos, • Sawzall / Sawzall, • Screw gun / Pistola de tornillos Physical Demands: / Demandas Físicas: *Essential Function © 2016 Millwood, Inc. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is frequently required to walk and talk or hear. The employee is occasionally required to stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and ability to see color. Las demandas físicas descritas aquí son representativas de las que se deben cumplir por un empleado para realizar con éxito las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, se requiere regularmente del empleado pararse, usar las manos y alcanzar con los brazos y manos. Con frecuencia se requiere del empleado caminar, y hablar o escuchar. Se requiere del empleado ocasionalmente agacharse, arrodillarse, agacharse o arrastrarse. El empleado debe levantar regularmente y/ o mover hasta 75 libras. Habilidades específicas de visión requeridas para este trabajo incluye visión cerca, la visión de lejos, visión periférica, y la habilidad para ver el color. Work Environment: / Ambiente de Trabajo: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to wet or humid conditions (non-weather), outdoor weather conditions, extreme cold (non-weather), and extreme heat (non-weather). Las características del ambiente de trabajo que se describen aquí son representativas de las que un empleado encuentra en el desempeño de las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, el empleado es expuesto regularmente a trabajar cerca de partes mecánicas en movimiento. El empleado es expuesto frecuentemente a gases o partículas en el aire. El empleado es ocasionalmente expuesto a condiciones húmedas o mojadas (no el clima), condiciones climáticas externas, extremadamente frio (no el clima), y el calor extremo (no el clima). The noise level in the work environment is usually loud. El nivel de ruido en el ambiente del trabajo es usualmente alto.

Job Description Job Title: Packaging Technician Reports To: Packaging Supervisor Hourly Rate: $18.00 Location: 350 Buell Rd., Rochester, NY 14624Position OverviewThe Packaging Technician is responsible for the safe, accurate, and efficient packaging and labeling of food-grade cannabis products. This role requires maintaining cleanliness, ensuring quality and consistency, and following Good Manufacturing Practices (GMP). The Packaging Technician will support the packaging department by maintaining proper records, assisting with inventory management, and performing other tasks as assigned by management.Essential Duties and Responsibilities• Package and label cannabis products in accordance with company protocols and training.• Accurately label all packaging to ensure regulatory and brand compliance.• Fulfill production and sales orders efficiently and with high attention to detail.• Ensure packaging meets established quality and quantity standards.• Maintain accurate counts of inventory and assist in tracking raw materials, packaged goods, and fulfilled orders.• Move product inventory safely between work areas.• Keep workstations organized, sanitized, and compliant with safety and sanitation standards.• Track and dispose of waste material in accordance with company procedures.• Comply with all biosecurity and hygiene measures within the facility.• Maintain up-to-date knowledge of state regulations, compliance requirements, and company SOPs.• Participate in required training and professional development activities.• Support other departments and tasks as needed, demonstrating flexibility and teamwork.• Maintain consistent attendance and punctuality.• Adhere to all company policies, procedures, and safety protocols.Minimum Qualifications• High School Diploma or GED required.• Minimum of 1 year of experience in a manufacturing or packaging role with a focus on product safety, quality, and compliance.• Familiarity with FDA, GMP, HACCP, OSHA standards (preferred).• Ability to wear all required PPE, including bump cap, hairnet, earplugs, beard net (if applicable), gloves, safety glasses, and slip-resistant shoes.• Basic computer literacy and math skills.• Strong communication skills and attention to detail.• Dependable with a strong work ethic and willingness to learn.• Ability to perform repetitive tasks for extended periods of time.• Ability to push, pull, or lift up to 50 lbs.• Must have reliable transportation.Working Conditions and Physical Requirements• Exposure to environmental elements including dust, fumes, temperature extremes, humidity, and noise.• Exposure to physical risks involving mechanical, chemical, and electrical hazards.• Requires standing, walking, bending, kneeling, reaching, and lifting throughout the shift.• Must be able to lift and carry up to 50 pounds.• Must be able to use fine motor skills and perform detailed, repetitive tasks.• Frequent interaction with team members, supervisors, and vendors, requiring professional communication and etiquette.• High stress tolerance and adaptability in a fast-paced, changing environment.Expectations• Embody and uphold the company's Core Values of People, Quality, and Growth.• Flexibly support other areas of the facility as needed.• Complete all required training on schedule.• Maintain full compliance with company policies and procedures.Equal Opportunity Employer The company is proud to be an Equal Opportunity Employer and complies with all applicable ADA regulations.

Job DescriptionJob purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • Other duties as assigned Qualifications • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • Mechanical capabilities helpful. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran Mon - Thurs: 3pm-1:30am

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • Other duties as assigned Qualifications • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • Mechanical capabilities helpful. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran Mon - Thurs: 5am - 3:30pm

Job DescriptionOverview Join our dynamic team in Rochester, NY, as an Assembly and Packaging Specialist! In this role, you will play a crucial part in ensuring our products are assembled and packaged with precision and care. We value teamwork, attention to detail, and a positive attitude. If you're looking for a hands-on position in a supportive environment, we want to hear from you! Responsibilities • Assemble products according to specifications and quality standards., • Package finished products for shipment, ensuring they are secure and presentable., • Conduct quality checks throughout the assembly and packaging process., • Maintain a clean and organized workspace to promote safety and efficiency., • Collaborate with team members to meet production goals and deadlines., • Report any issues or discrepancies to the supervisor promptly., • Participate in training sessions to enhance skills and knowledge. Qualifications, • High school diploma or equivalent preferred., • Previous experience in assembly or packaging is a plus, but not required., • Strong attention to detail and ability to follow instructions., • Ability to work effectively in a team-oriented environment., • Good communication skills and a positive attitude., • Willingness to learn and adapt to new processes., • Physical ability to lift and move products as needed.

Job DescriptionDescription: Position Summary Assembles, disassembles and modifies mechanical systems and subassemblies by following specific instructions. May be required to remove and recycle debris. Attention is required to prevent damage to operator, product or equipment during activity. May make necessary minor equipment adjustments to ensure satisfactory production. Inspects work visually for obvious defects. Organizational Interrelationships The Assembler reports directly to the Production Supervisor. The Assembler interacts with secondary operations department personnel, as well as other manufacturing (CNC, grinding and tool room departments), quality assurance and engineering personnel. There is no regular customer or supplier contact. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual serving in the capacity of Assembler shall be consistently able to: • Assembles and disassembles large shelters, complex subassemblies, chassis and mechanical parts using air tools, riveters and riv nut tools., • Reviews modification and rework instructions or discrepancy reports, engineering change orders and preliminary rework notices. Modifies or reworks mechanical assemblies by removing, repairing and replacing parts, cables or harnesses., • Routes large cables and harnesses using tie wraps and straps in Radar Systems including AC outlet wiring., • Operates various power tools used in the assembly of all types of hardware as identified on the supplied parts lists., • Performs, before shipment to the customer, paint touch-up to assemblies by using spray guns and airbrushes., • Utilizes torches and plastic body filler to straighten and repair sheet metal punctures. Applies adhesives to gaskets and grommets., • Works from mechanical blueprints, process sheets, sketches and written or verbal instructions., • Understand basic Vantage system for time reporting purposes., • Understand basic SPC for data collection and analysis., • Understand how to use elementary statistical tools for problem identification and analysis., • Assist other department operators when required or directed., • Perform any other assigned duties in accordance with instruction provided by the supervisor. Supervisory Responsibilities This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education, Training and/or Experience Minimum skill requirements are: • Knowledge of mechanical blueprints and layout drawings., • Ability to perform spray paint touch-up. Ability to use adhesives., • Knowledge of mechanical rework operations., • Must be able to meet specified certification per company and customer standards. Normally acquired through two (2) years of mechanical assembly experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees. Mathematical Skills Ability to add, subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, verbal or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands The physical demands described below are representative of those that must be satisfied by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands or fingers, handle, or feel; reach with hands and arms. The employee frequently is required to sit. The employee must regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 40 pounds. Specific visual abilities required for this job include close vision, peripheral vision, depth perception and an ability to monitor product visually. Work Environment The work environment characteristics described below are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock, minimal exposure to extreme heat and vibrating machinery. The noise level in the work environment is usually loud. Accordingly, all employees are empowered to identify problems with system, process or product quality and whenever possible, prevent discrepancies and suggest continuous improvement opportunities. Coworkers, including any individual serving in the capacity of Assembler are particularly encouraged to identify potential safety hazards within the factory or office and report them immediately to their supervision. Benefits: Competitive Pay Medical effective on start date Dental Life Insurance (plus additional supplemental coverage) 401(k) program Short & Long Term Disability Profit Sharing Program Vacation Program Educational Financial Assistance Flexible Spending Accounts Health Savings Accounts And others! PGM is an EOE employer

Job DescriptionDescription: General Job Summary: Using job production documentation, selects, loads, and aligns tools into press brake machines in order to produce metal parts from raw stock while ensuring the safety integrity of the tool and the quality of the finished part. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Ensure all safety processes and procedures are defined for the job., • Reviews job description (job traveler) and determines tool requirement., • Using material handling equipment, loads and aligns appropriate tool into press brake machine., • Sets up blanks for forming in machine., • Selects appropriate packaging material and sets up supply., • Make the first part to ensure quality., • Confers with toolmakers and quality personnel to resolve problems., • Inspects first run of the part. Submits to inspection for blue tag. Runs parts., • Instructs machine operator on part production., • Performs periodic quality checks., • Schedules work on various press brake machines to ensure daily/weekly production requirements are met., • May train new brake operators., • May assist in scheduling jobs in other presses., • Maintains inventory of tools and fixtures., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); or equivalent combination of education and experience. One year certificate from college or technical school preferred Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use inspection gauges (verniers, micrometers, height stand, pins) and material handling equipment. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionDescription: Our Mission Our mission is to leverage the power of food to end hunger and build healthier communities. Our Vision We believe that the fight against hunger and the fight against poverty are one and the same. We envision a future in which food is recognized as a human right and every person is able to feed themselves and their families in dignity. Together, we work to create a more nourished, prosperous region. The Foodlink Way Act With Compassion Take Responsibility Be a Team Player Listen, Learn, Adapt Job Title: Curbside Market Operator Department: Community Health Programs Reports to: Food Retail Manager Status: Hourly, Non-Exempt, Part-Time, Seasonal Job Level: Foundational Support Roles (2) Updated: September 2026 SUMMARY The Curbside Market is a mobile market that sells fresh, healthy, and affordable foods in low-income communities throughout Foodlink’s service area. The Curbside Market Operator is responsible for ensuring safe, timely and efficient market operations at each site as assigned by their daily route and schedule. Daily responsibilities include loading/unloading, driving the Curbside Market vehicle, providing exemplary customer service, money handling and use of point-of-sale system, data collection, and volunteer supervision. Curbside Market is one of the largest mobile markets in the country and provides healthy food access to thousands of people in Greater Rochester annually. Curbside Market operates all-year round in rain or shine conditions as long as it is safe for staff and customers. A successful candidate will be able to thrive in a fast-paced, adapting environment. Operators are a representative of Foodlink and Curbside Market and are expected to uphold the values and mission of this program in our community. KEY RESPONSIBILITIES Effectively completes daily tasks required of Curbside Market operators. • Follows assigned route and schedule, driving trucks to each Curbside Market site on time., • Responsible for recording all sales in the point-of-sale system., • Keeps Curbside Market vehicles clean and organized., • Loads and unloads Curbside Market vehicle at the beginning and end of each shift, • Ensures safety of self, volunteers and customers by inspecting, cleaning and sanitizing vehicles. Completes and observes important safety procedures. • Completes pre-trip truck inspections before every route., • Observes all safety policies and procedures as required by Foodlink policies and DOT regulations., • Reports accidents, incidents, and safety concerns immediately to appropriate personnel. Provide exemplary customer service to Curbside Market Customers and others. • Operators are expected to serve a wide variety of people and communities. Being able to think quickly on your feet, adapt to new environments, and engage with a wide variety of people is required., • Represents Foodlink in a professional manner at all times when interfacing with customers, donors, volunteers and/or constituent providers., • Communicates all issues and concerns from sites and customers to the Curbside Market Supervisor. Serve as the point person for Foodlink volunteers and interns. • Help train and onboard new volunteers and interns. Support other organizational priorities, as determined by the Director of Community Health Programs, given the flexibility required of all staff in a fast-paced, growing organization. Requirements: COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies: • Adaptability: Able to adapt to evolving program needs in a fast- paced environment., • Problem Solving: Identifies and resolves problems in a timely manner and develops alternate solutions., • Teamwork and Communication: Willingness to step up to support the Curbside Market team and mission. Responds promptly to internal team needs and commitments., • Quality: Demonstrates accuracy and thoroughness, looking for opportunities to improve and promote quality., • Self-direction: Able to work independently, but also able to seek assistance and direction on complex issues., • Customer service: Must be able and willing to deliver excellence customer service to all customers, volunteers, ambassadors, and community partners. QUALIFICATIONS • Driving: Must possess a valid driver’s license with a good driving record, feel comfortable driving a large vehicle, • Physical: Must be able to lift 50 pounds and stand on feet for an extended amount of time. Will be working in hot and cold temperatures, both indoor and outdoor., • Point-of-sale Proficiency: ability to use a tablet to record transactions. We are actively seeking a diverse pool of candidates for this position and strongly encourage applications from candidates of color. SALARY AND BENEFITS This is a seasonal position, with part-time hours, starting October 2026 and ending January 2027. This position is paid at a rate of $19.50 per hour. This position is not eligible for health benefits, holidays, or paid time off (PTO). This position is eligible for New York State Paid Sick Leave, accrued at a rate of 1 hour for every 30 hours worked, up to a maximum of 56 hours per year. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand and talk and hear. The employee is frequently required to use hands to handle or feel items such as documents. The employee is frequently required to stand and walk for long periods of time. Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. Able to lift bulk objects or objects weighing up to 50 pounds. Work Environment The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Note: The above description is illustrative of tasks and responsibilities. It is not meant to be all- inclusive. Employees will follow other instructions and perform other related duties as required. Diversity, Equity, & Inclusion Foodlink is committed to fostering, cultivating, and preserving a culture of diversity, equity, and inclusion. At Foodlink we believe that anti-hunger work is only possible with a commitment to removing barriers caused by systems of oppression that perpetuate hunger and poverty. We recognize that systematic injustice and bias disproportionately impact some identities more than others. Foodlink is actively working to center equity- the fair treatment of all people- in everything that we do so that everyone in our region has access to nourishing food that reflects and values cultural differences. Foodlink is committed to listening and supporting solutions to hunger that are sourced from people and communities with lived/living experience of hunger and poverty, and to responding where inequities exist. Foodlink is committed to taking great care to cultivate internal culture and practices that support diversity and inclusion. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We aim to foster an environment in which everyone feels a sense of belonging and understands their connection to the Foodlink mission. Foodlink employees have a responsibility to always treat others with dignity and respect. Employees are expected to always exhibit conduct that reflects our values and promotes equity and inclusion during work, and at work functions.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product introduction (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Press Brake Operator PRIMARY FUNCTION: The Press Brake Operator is responsible for the set-up, adjustment, and operation of our press brake machines to perform a wide variety of prototype jobs, short run parts, and long run parts. The operator will need to inspect parts and make adjustments to ensure adherence to quality standards. May also be asked to help in other areas such as: machining, pemming, laser/deburring. ESSENTIAL FUNCTIONS: • Set up, run, and adjust machines to ensure quality parts, • Read blueprints and apply knowledge of GD&T principles., • Works independently and with team members to help get difficult jobs done., • Able to float and help in different sheet metal departments as needed. Reports To: Sheet Metal Supervisor Basic Qualifications: • 2+ years of press brake experience, • High school diploma or equivalent, • Attention to detailPreferred Qualifications:, • Knowledge of Amada-type machines a plus, • Panel bender and slip roll knowledge a plusWork Authorization:, • US Persons, • Must be able to work in the United States without corporate sponsorship now and in the futurePEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: Agility We are committed to maintaining a financially prudent and adaptable organization, ready to meet evolving challenges with confidence. Compassion We care deeply for our talented and loyal PEKO family, fostering a supportive and inclusive workplace culture. Endurance We believe in the resilience of our people—problem solvers who shape the future through perseverance and innovation. Integrity We uphold transparency, honesty, and respect in all interactions with employees, customers, and stakeholders. Safety We prioritize a safe, clean, and positive work environment where every team member can thrive. Salary Range: A reasonable estimate of the compensation range for this position is $24-$28/hour. The wage range for this role considers a wide range of factors when making compensation decisions, including skill sets, experience and training, licensure and certifications, as well as other business and organizational requirements. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities are subject to change at any time, with or without notice., • Project a positive and professional image of the company and of management to employees at all levels. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube https://youtu.be/dDT1Cp908ns PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR CTvLGoTeB6

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Operate milk separating equipment in the processing department in a safe and sanitary manner following all GMP's. Operations include receiving/coordination of raw milk, separation, selection of skim milk and cream tanks/silos, running of HTST, monitoring and maintaining process controls of heat exchanger process variables and documenting accurate recordings of process parameters while in operation. Blend and pasteurize for bulk load-out. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules. Keep the work center audit ready., • Report to and follow the direction of Processing Supervisors., • Know proper established start up and shut down procedures., • Maintain and monitor proper process parameters such as pressures, temperatures, flow rates as well as the quality of product being produced., • Know and maintain process specifications., • Properly clean process equipment such as silos, cream storage silos, balance tanks, lines, valves, pumps and heat exchangers., • Clean process equipment such as tanks, lines and separators, which includes, but isn't limited to, hand-cleaning parts, Clean-In-Place (CIP) and Clean-Out-of-Place (COP) operations on a daily basis., • Take accurate samples to monitor Clean-In-Place (CIP) system for chemical concentration., • Take accurate samples of products for QA testing., • Service pumps, valves and heat exchangers to maintain operational state and per routine Preventative Maintenance (PM) schedule., • Responsible for overall system efficiency., • Follow escalation protocol based on production and quality triggers., • Aid in the training of new personnel or upskilling of team members., • Effectively follow proper standard operating procedures (SOP)., • Complete every shift Master Sanitation Schedule (MSS), Centerline (CL), and Clean, Inspect, Lubricate (CIL) tasks on a timely manner and accurately., • Communicate with upstream and downstream processing on any anticipated schedule delays and/or changes skills/qualifications required: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment., • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation., • Must be willing to ask for assistance when the process is unclear., • A high school diploma or General Education Degree (GED) is required, • High School level verbal and written communication skills., • Basic computational skills required. Simple math reasoning required., • Must be able to operate the equipment effectively after the appropriate break-in period., • Must possess or be able to obtain an Industrial Truck Operator License., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting/Standing/Walking/Lifting/Carrying: The operator stands throughout their shift and walks on uneven concrete and tile surfaces. The operator lifts up to 60 pounds on an occasional basis. Two or more employees complete lifts of greater than 100 pounds. Pushing/Pulling/Bending/Stooping: The operator occasionally pushes/pulls a variety of objects which may include empty pallets, and brooms during cleanup activities. The operator will push/pull pipe-fittings during hook up. The operator bends and stoops occasionally throughout the workday, when servicing equipment, picking supplies or waste product off the floor. Squatting/Kneeling/Crawling/Twisting/Turning: The operator may squat when picking up supplies and during cleanup duties, including kneeling on the floor and crawling under equipment. Occasional twisting and turning at the waist while changing dryer lances, or making CIP connections. Climbing/Balancing/Reaching: The operator occasionally climbs approved stairs or ladders. The operator reaches below shoulder level to pick up pipe-fittings from the floor or while servicing product pumps and related equipment. The operator may reach at or above shoulder level when making equipment adjustments, or during cleanup duties. Grasping/Manipulation: Frequent use of the hands and fingers is required of the operator when servicing pumps, using scrub brushes, and connecting pipe-fittings. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Employees will be subject to ambient temperatures as well as elevated temperatures, up to 110 degrees, due to equipment operation and cleaning. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Processing Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: General Job Summary: In addition to performing laser operation, ensures jobs are set-up to meet MPCD/customer requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • With Manufacturing Supervisor, schedule daily/weekly workload., • Download part program into machine controller., • Ability to perform adjustments of the tube laser to remedy slag, burn through, burrs, and un-desirable conditions., • Utilizes hand instruments (micrometers, calipers, height gage) to perform first piece/blue tag inspections., • Obtains inspection approval for each job., • Works with Engineering to resolve problems and production issues., • Train new Associates on equipment operation, department processes and procedures., • Ability to troubleshoot and resolve basic errors with the operation of the tube laser., • May be required to work/assist Maintenance with issues outside of basic errors/issues., • Ability to successfully load material and record production in Plex. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Ability to use quality measurement devices such as micrometer, verniers, calipers height gauges. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Summary/Objective: Members of the Finishing department are charged with developing the skills defined below by Flower City Group, while learning to perform the following task categories: job acceptance, make ready, job run, job completion and maintenance. Through these activities, Clamshell Operators will ensure the highest level of productivity is consistently achieved. Schedule: A Shift, Monday - Friday 7:00am - 3:30pm, Overtime on weekends Essential Functions: Make Ready: • Review press & bindery ticket to completely understand work to be done., • Note any defects in the printing by reviewing any quality tags., • Verify size with proofs, die vinyl and ticket., • Set up machine – achieve proper cutting, scores, and register., • Have cut sample approved by a Senior Operator. Job Run: • If helper is needed, explain job and have the person read the job ticket and bindery ticket., • Feed material into machine, cut sheets – check quality and position often., • Have helper assist by collecting die cut material, checking quality and position and packing. Job Completion: • Complete load tag., • If needed, bring finished product to shipping., • Fill out bindery ticket., • Add in job tracking computer. Maintenance: • Tear down die cutter, fill out die information sheet and return die., • Clean machine and area surrounding machine., • Complete any preventive maintenance., • The Senior Operator will be responsible for assisting other Operators, making any necessary repairs, and helping production with layouts., • Seeks guidance and direction as necessary for performance of duties., • Demonstrates good judgment in investigating problems., • Respects the confidentiality of company information., • Maintains cooperative working relationship with supervisor., • Demonstrates ability to tactfully handle the difficult situations., • Makes best use of time during the workday., • Consistently shows ability to recognize and deal with priorities., • Perform all duties in an independent manner with little supervision., • Performs all other tasks/duties as may be assigned by their supervisor., • Recognizes and performs duties which need to be performed although not directly assigned – assists others as needed. Competencies: • Machine operation, • Self-starter with a willingness to learn new things., • Able to provide constructive feedback and creative solutions to problems., • Must be computer knowledgeable., • Must be able to perform simple programing. Requirements/Qualifications: • Knowledgeable with measurements Preferred Education and Experience: • High School Diploma or equivalent, • Experience operating a clamshell a plus Physical Demands: • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities.

Job Description Job Summary: Works from given instructions, will run various manual and CNC lathe/mill machines. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Keeps work area clean and organized. Additional Responsibilities: • May be required to edit offsets at machine and/or change tools., • When requested, may work on special projects and various related assignments., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel and must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 2 years experience in a machine shop environment., • Familiar with G and M codes., • Ability to read and understand blueprints., • Good communication skills., • Must be a team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Join JK Findings as a Full-Time Machine Operator and become an integral part of our dynamic team located in Rochester, NY. In this onsite role, you'll have the opportunity to work directly with cutting-edge machinery in a collaborative environment that thrives on innovation and excellence. This position allows you to develop your skills as a problem solver while engaging in projects that require a forward-thinking approach. Your contributions will directly impact our customer-centric mission, providing you with a sense of accomplishment and pride. Be part of a high-performance culture where your ideas are valued and where you will grow alongside passionate colleagues. If you are driven, eager to learn, and ready to take on new challenges, this is the perfect opportunity to elevate your career in the accounting industry. JK Findings: Our Mission JK Findings is a global jewelry component manufacturer and wholesaler located in Rochester, NY. Our customers, located in over 48 countries, entrust us as a key supplier of quality components and supplies. In our Upstate New York headquarters, we house some of the most advanced equipment available to produce new and unique components for the jewelry industry. Day to day as a Machine Operator As a Machine Operator at JK Findings, you will engage in various daily tasks designed to ensure efficiency and quality in our operations. You will be responsible for setting up and calibrating machinery, monitoring equipment performance, and adhering to strict safety protocols. Daily activities include conducting quality checks on finished products, troubleshooting minor issues, and working closely with team members to meet production goals. You will maintain a clean and organized workspace while documenting production metrics and reporting any discrepancies to your supervisor. Collaboration with other departments will be essential to ensure seamless operations, and you will be encouraged to contribute ideas for process improvements. As you settle into your role, you will receive ongoing training to enhance your skills and support your growth within the company. Are you a good fit for this Machine Operator job? To excel as a Machine Operator at JK Findings, several key skills are essential: • Strong attention to detail is critical for monitoring machine performance and ensuring high-quality outputs., • Strong problem-solving abilities to quickly identify and address issues that may arise during operations., • Effective communication is important, as you will collaborate with teammates and supervisors to optimize processes and share observations., • Solid mechanical aptitude is needed for you to troubleshoot equipment failures and determine root causes., • A solid understanding of safety protocols and practices is vital for maintaining a secure work environment., • A proactive and customer-centric attitude will help you align your work with our organizational values and contribute positively to team dynamics., • Lastly, a commitment to continuous improvement will enable you to thrive in our high-performance culture.

Job DescriptionDescription: Tokai Carbon GS is looking to add to its world class team of highly trained and skilled personnel. We provide carbon and graphite solutions for Aerospace, EDM, Fuel cell and Semiconductor markets. Tokai Carbon GS has earned a reputation for leading the industry in precision manufacturing. Essential Functions: • Program, set up, and operate CNC mills to produce any given product to a customer’s specification on dimensions, functionality, quality, and delivery., • Comply with all safety regulations, • Maintain a safe working environment that is organized, clean, and free from debris, • Perform periodic preventative maintenance on equipment being used, including daily cleaning and daily maintenance checklists, • Perform all delegated tasks from CNC Supervisor, • Suggest ideas to better work environment and/or increase efficiency of workflow, • Perform inspections on all products to ensure product quality before it reaches the Quality department., • Work with CAD to facilitate the production of products, • Actively seek out extra work, • Work with department Manager to ensure smooth flow between other departments during multi-departmental jobs., • Work with employees within the department to maximize production, • Maintain tooling in organized manner. Inspect tooling before use to ensure quality product is produced. Compensation & Benefits Individual compensation packages are based on a variety of factors unique to the candidate, including skill set, experience, qualifications, and other job-related reasons. A reasonable estimate of the compensation range for this position is $25.00-$30.00 per hour. We offer competitive salaries that are in line with or above industry standards and an extensive benefits package including: • Health Insurance, • Company Paid Dental, and Vision, • Company Paid Life Insurance, • Company Performance Based Bonus, • Shift Differentials, • Paid Time Off, • 10 Paid Holidays, • Onsite Fitness Center, • 401(k), • Employee assistance program, • Health savings account, • Referral program, • Tuition reimbursementRequirements:, • Clear understanding of offsets, fixturing, and programming techniques, • Good skills with conventional inspection equipment. CMM experience/knowledge preferred., • Excellent math skills, • Good oral and written communication skills, • Good organizational skills, • Good customer service skills, • Perform all required scribing and hand-working., • Maintain a through in-process inspection for all jobs.

Job Description Location: Saint John Fisher University • We are hiring immediately for full time GRILL COOK (LATE NIGHT) positions., • Address: 3690 East Avenue, Rochester, NY 14618. Note: online applications accepted only., • Schedule: Full time schedule. Days may vary between Sunday - Saturday. Daily late night shifts: 4:30 PM to 1:00 AM. More details upon interview., • Requirement: At least 1-2 years of grill cook experience is required., • Perks: Free coffee and beverages, free shift meal, free parking, and chef coat included!, • Pay Range: $18.00 per hour to $21.50 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1568736. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Prepares food and serves customers at the grill station in accordance with current applicable federal, state and corporate standards, guidelines and regulations to ensure high-quality food service is provided. Essential Duties and Responsibilities: • Takes orders from customer and prepares items requiring short preparation. Completes orders from steam tables and serves customers at multiple stations., • Serves customers in an efficient, friendly manner following established steps of service meeting outlined standards. Ensures food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket-collection procedures during service. Responsible for records from area worked during service periods., • Uses approved recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Carries pans, kettles and trays of food to and from workstations, stove and refrigerator in accordance with established safety standards., • Stores foods in designated areas following standard wrapping, dating and food safety and rotation procedures., • Cleans, sanitizes and maintains all assigned work areas, equipment and utensils to ensure sanitation standards are met., • Resolves customer concerns and reports relevant information and concerns to supervisor., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned. The Benefits We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyChartwellsHED.pdf Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company's behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionDescription: Here is a complete, sharp job description tailored specifically for a Sous Chef at Lot 54, with a clear emphasis on dual experience across both morning and evening service dynamics! Job Description: Sous Chef Company: Lot 54 Position: Sous Chef (Full-Time) Location: Rochester, NY About Lot 54 At Lot 54, we are passionate about delivering exceptional food, high-energy service, and a vibrant, welcoming atmosphere. We take pride in quality ingredients, scratch cooking, efficient ticket times, and building a strong, collaborative kitchen culture from early morning prep to late-night close. At Lot 54, we work hard, but we don't take ourselves too seriously. We're looking for teammates who bring good vibes, keep the team dynamic fun, and aren't camera-shy! We love featuring our crew in behind-the-scenes social media content, hype videos, and kitchen highlights. If you love good food, good energy, and leading a team that has a blast together, this is the line for you. Position Overview We are seeking a skilled, passionate, and energetic Sous Chef to serve as a core leader in our kitchen. As the Sous Chef at Lot 54, you will work hand-in-hand with kitchen leadership to manage daily heart-of-house operations, supervise line cooks, ensure food quality, maintain strict safety standards, and jump on the line whenever needed. Key Requirement: Proven experience in both Breakfast/Brunch and Dinner service is required. From executing fast-paced morning egg stations, delicate breakfast proteins, and daytime prep to running high-volume dinner lines, ticket expo, and evening closing procedures, you must be comfortable leading across all dayparts. Key Responsibilities • Kitchen Leadership & Supervision: Manage, mentor, and motivate line cooks, prep cooks, and utility staff across both morning and evening shifts to foster a productive, high-energy, and fun kitchen environment., • Dual-Daypart Execution: Seamlessly oversee both Breakfast/Lunch service (high-volume morning rushes, egg/brunch execution) and Dinner service (steak, seafood, night-line execution, and expo)., • Quality & Consistency: Ensure all prep, cooking, and plating meet Lot 54’s specs, recipes, presentation standards, and flavor profiles every single shift., • Inventory & Food Prep Control: Assist with ordering, receiving, inventory counts, food cost management, prep lists, and minimizing kitchen waste., • Food Safety & Sanitation: Enforce strict health code compliance, kitchen cleanliness, temperature logs, sanitation standards, and proper labeling (FIFO)., • Vibe & Culture: Lead by example with a positive work ethic, help keep kitchen morale high, and participate in fun, behind-the-scenes social media content and kitchen crew spotlights.Qualifications & Skills, • Experience: 2+ years of culinary leadership (Sous Chef, Kitchen Supervisor, or Lead Line Cook) in a high-volume restaurant., • Required Expertise: Demonstrated hands-on experience on both Breakfast/Brunch lines and Dinner lines., • Technical Mastery: Superior knife skills, deep knowledge of kitchen stations, equipment maintenance, and ticket expo leadership., • Schedule Flexibility: Full availability including early mornings, late nights, weekends, and holidays., • Personality: Strong communicator, fair leader, camera-friendly, with a positive attitude that keeps the kitchen moving forward with high energy., • Physical Stamina: Ability to stand for long shifts in a high-heat environment and lift up to 50+ lbs safely.What We Offer, • Competitive salary / hourly wage (commensurate with experience), • A fun, supportive, and dynamic kitchen culture, • Career growth and leadership development opportunities, • A platform to showcase your culinary creations and kitchen personality on our social media channelsRequirements:

Job DescriptionOverview Join our dynamic team in Rochester, NY, as an Assembly and Packaging Specialist! In this role, you will play a crucial part in ensuring our products are assembled and packaged with precision and care. If you enjoy working in a fast-paced environment and take pride in delivering quality results, we want to hear from you! Responsibilities • Assemble products according to specifications and quality standards., • Package finished products for shipment, ensuring they are secure and properly labeled., • Conduct quality checks throughout the assembly and packaging process., • Maintain a clean and organized workspace to promote safety and efficiency., • Collaborate with team members to meet production goals and deadlines., • Report any equipment malfunctions or safety concerns to the supervisor., • Participate in training and development programs to enhance skills and knowledge.Qualifications, • High school diploma or equivalent., • Previous experience in assembly or packaging preferred but not required., • Strong attention to detail and ability to follow instructions accurately., • Ability to work effectively in a team-oriented environment., • Good physical stamina and ability to lift up to 50 lbs., • Basic understanding of safety protocols in a manufacturing setting., • Willingness to learn and adapt to new processes and technologies.

Job Description Technician I, Garage Days – Alignments Reports To: Fleet Maintenance Supervisor Salary Range: Starting Pay: $33.17 per hour | Top Rate Within 3 Years: $41.48 per hour Schedule: 7:00 a.m. – 3:30 p.m., Monday, Thursday–Sunday Days Off: Tuesday & Wednesday Union Representation: ATU Local 282 Make an Impact at RTS At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees serving eight counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders each year. As a Technician I, Garage Days – Alignments, you'll play a vital role in maintaining the safety and reliability of our fleet by performing alignments, repairs, inspections, and preventive maintenance on buses and support vehicles. Why Join RTS? Staying Healthy • Medical, Dental & Vision Insurance, • Flexible Spending Account (FSA) Feeling Secure • RTS Pension Plan, • NYS Deferred Compensation Plan, • Life, Disability & Supplemental Insurance, • Union representation through ATU Local 282 Work-Life Balance • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • 24/7 Fitness Center, • Wellness Program, • Culture & Inclusion Council, • Public Service Loan Forgiveness (PSLF), • Employee Discounts & More Career & Professional Growth • Advance to top pay of $41.48/hour within 3 years, • Stable, consistent work with weekly pay, • Paid training on current vehicle technologies, • Tool allowance and boot allowance, • Opportunities for advancement within Fleet Maintenance About the Role The Technician I, Garage Days – Alignments position is responsible for performing front-wheel alignments, preventive maintenance, diagnostics, repairs, and overhauls on RTS buses and fleet vehicles. This role ensures vehicles remain safe, reliable, and available for daily service while supporting overall fleet maintenance operations. What You'll Do • Perform front-wheel alignments to maximize tire life on articulated buses, 40-foot buses, and non-revenue vehicles., • Maintain, repair, and overhaul RTS buses and fleet vehicles., • Perform inspections, diagnostics, and preventive maintenance., • Replace, adjust, and repair mechanical components., • Complete required test drives following repairs., • Operate diagnostic software and equipment, including Cummins InSite and Allison diagnostic systems., • Perform welding, brazing, and cutting torch work as required., • Operate tow trucks and respond to road calls when assigned., • Perform articulated bus repairs and overhauls., • Complete ramp and battery preventive maintenance inspections and repairs., • Report safety concerns, equipment defects, and maintenance issues to supervisors., • Maintain accurate maintenance documentation., • Perform other duties as assigned. What We're Looking For Required Qualifications • Two (2) years in an accredited diesel mechanics program or comparable technical coursework; OR • Equivalent verifiable work experience (two years of work experience may substitute for one year of education)., • Excellent customer service and communication skills., • Must provide own tools., • Must obtain a New York State CDL Class B permit with passenger and air brake endorsements prior to employment., • Must obtain a CDL Class B license within 90 days of hire., • Must obtain a CDL Class A permit with towing endorsement (may be obtained after hire)., • Must obtain a CDL Class A license within 90 days of receiving the permit., • Must successfully complete a post-offer physical examination., • Must be able to read, write, and communicate effectively in English for safety, communication, and use of technical manuals. Preferred Qualifications • Experience performing heavy-duty vehicle alignments., • Experience maintaining transit buses or commercial diesel vehicles., • Experience using electronic diagnostic systems., • Welding and fabrication experience. Knowledge, Skills & Abilities • Knowledge of diesel engine repair and preventive maintenance practices., • Ability to perform accurate front-wheel alignments., • Knowledge of mechanical, hydraulic, electrical, and pneumatic systems., • Ability to diagnose and repair vehicle systems using computerized diagnostic equipment., • Ability to safely operate shop equipment and towing vehicles., • Strong troubleshooting and problem-solving skills., • Ability to work independently and as part of a team., • Strong verbal and written communication skills., • Commitment to workplace safety and quality workmanship. Working Conditions & Physical Requirements The physical demands described are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be provided for qualified individuals with disabilities. • Frequently required to stand, walk, reach, use hands, talk, and hear., • Occasionally required to sit, climb, balance, stoop, kneel, crouch, or crawl., • Frequently lift or move up to 20 pounds., • Occasionally lift or move up to 75 pounds., • Must possess close, distance, color, peripheral, and depth vision with the ability to adjust focus., • Regularly works around moving mechanical equipment., • Frequently works outdoors in varying weather conditions., • Occasionally exposed to wet or humid environments, fumes, airborne particles, vibration, and chemicals., • Work environment includes moderate to loud noise levels. Equal Employment Opportunity Rochester Genesee Regional Transportation Authority (RGRTA) is committed to providing equal employment opportunities to all applicants and employees without regard to race, color, religion, national origin, citizenship or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic protected by applicable federal, state, or local law. RGRTA will provide reasonable accommodations to qualified applicants and employees with known disabilities unless doing so would impose an undue hardship on the operation of the organization. For safety-sensitive positions, RGRTA maintains a drug- and alcohol-free workplace in accordance with Department of Transportation (DOT) and Federal Transit Administration (FTA) regulations. Applicants for safety-sensitive positions must successfully complete a pre-employment drug test and receive a verified negative test result before performing safety-sensitive functions. Employees in these positions are also subject to additional drug and alcohol testing throughout their employment as required by applicable regulations. As required by law, RTS tests for a variety of substances, including cocaine, amphetamines, opioids, phencyclidine (PCP), and marijuana metabolites. Please be aware that marijuana can remain detectable in the body for an extended period of time—sometimes more than 30 days—and may result in a positive drug test long after use.

Job Description Feeling stuck? Put your career in motion with a great, new opportunity. Join the Kelly® team as a Production Packer to work at a premier manufacturing client in Rochester, NY. We’re here every step of the way to help you and your career be the best it can be. Bring your energy and expertise. We’ll help you get where you want to be. Shifts: • $18.50 - 1st shift: 6:30am – 3:00pm Monday–Friday, OT on weekends as needed, • $20.35 - 2nd shift: 2:30pm – 11:00pm Monday–Friday, OT on weekends as needed, • $21.28 - 3rd shift: 10:30pm – 7:00am Sunday–Thursday, OT on weekends as neededWhy you should apply to be Production Packer:, • Competitive pay rates with shift differentials, • Opportunity to work in a cleanroom environment with a focus on safety and quality, • Be part of a leading organization within the manufacturing industry, • All shifts available to fit your schedule, • Full-time, long-term opportunity with overtime potentialWhat’s a typical day as Production Packer? You’ll be:, • Visually inspecting bottles from machines, conveyor lines, or bulk containers and making quality decisions on each part, • Setting up your work area as a controlled environment (attire including hats, gloves, beard masks, coats), • Performing housekeeping responsibilities to maintain a clean production environment, • Maintaining necessary paperwork and records per quality work instructions, • Supplying molding machines with raw materials, components, and scrap containers, • Navigating SAP screens and transaction codes to look up inventory balances, • Supporting line clearance procedures and adhering to ISO 9001 Quality Work Instructions, • Operating assigned machines or equipment and alerting supervisor or set-up personnel when issues ariseThis job might be an outstanding fit if you:, • Have a High School diploma or GED (required), • Have at least 2 years of manufacturing or packaging experience, • Are familiar with SAP and proficient with MS Office (Word, Excel), • Can perform simple math (add/subtract whole numbers), • Can read, write, and understand English, • Are licensed to operate a walkie truck, • Have excellent hand/eye coordination and can lift and load pallets up to 35 pounds, • Can work in a fast-paced team environment and adapt quickly, • Are able and willing to work overtime as needed, • Own and wear steel toe or composite toe shoes/bootsWhat happens next Once you apply, you’ll proceed to next steps if your skills and experience look like a good fit. But don’t worry—even if this position doesn’t work out, you’re still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more. Helping you discover what’s next in your career is what we’re all about, so let’s get to work. Apply to be Production Packer today! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Responsible for safely operating a large commercial vehicle to transport goods, ensuring timely deliveries, maintaining vehicle safety, and complying with all Federal and company regulations. Roughly 80% of all deliveries will be in the local Rochester, NY area, while the other 20% will require over-the-road, long distance travel. Specific Duties: • Pick-up and drop-off product to all Cannon Industries and Burnett Process facilities, • Assist Material Handlers with lifting, banding and shrink-wrapping parts ready to be transported, • Deliver and pick-up product from outside services, • Deliver and pick-up product from purchasing department, • Check incoming packages or individual items for correct quantity, inspects for damage to outer container and notes any irregularities on carrier's bill of lading, • Maintain log of all parts and product transported throughout the facility, ensuring the quantities are correct and proper quality paperwork is attached where applicable, • Perform maintenance check and fluid levels before start of transport, including fuel, • Work with supervisor to make sure all permits and DOT requirements are up to date, • Keep truck and box van clean and free of debris, both interior and exterior, • Inspect truck and box van for damage prior to start of transport Requirements Minimum Qualification: • Entry level, high school diploma or equivalent., • Minimum 2-years or more experience., • CDLLicense – Valid Class A Commercial Driver's License (with clean driving record), • Must be able to lift 50 lbs. or more, • Attention to detail, • Experience with vehicle maintenance Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionOur values start with our people, join a team that values you! Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience. As Part Of Our Team, You Will Experience: • Success. Our winning team pursues excellence while learning and evolving., • Career growth. We develop industry leading talent because Ross grows when our people grow., • Teamwork. We work together to solve the hard problems and find the right solution., • Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community. Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams. General Purpose: The Retail Associate is responsible for ensuring our Customers have a positive shopping experience. The Associate makes eye contact, smiles, and greets all Customers in a courteous and friendly manner, treats fellow Associates with respect, efficiently follows all company best practice standards as outlined in all work centers, maintains a clean work area at all times, and ensures proper merchandise presentation. The Retail Associate is expected to be engaged in these tasks as assigned during all working hours and will be expected to perform a range of functions in all areas of the Store as business needs require. The Associate may be requested to perform additional tasks in specific situations, if performance of these tasks will help achieve our Customer service and operational goals. Essential Functions: • Understands that safety is the number one priority and practices safe behaviors in everything they do., • Maintains a high level of awareness on the sales floor to create a safe and secure shopping environment for everyone. Maintains clutter free, clear egress to emergency exits. Immediately corrects or reports any unsafe conditions or practices to Store Leadership., • Treats all Customers and Associates with respect and courtesy; is friendly and professional at all times. Recognizes fellow Associates using Company recognition programs., • Assists Customers in any way necessary - is register-trained, assists Customers with merchandise, and answers Customer questions in a polite and knowledgeable manner. Greets all Customers by making eye contact, smiling and saying "hello" throughout the Store as well as saying "thank you" with every register transaction., • Provides prompt and efficient responses to Customers at all times. Responds to Customer Service calls immediately. Handles all Customer issues in a courteous and helpful way, calling a member of the Store Leadership when needed., • Represents and supports the Company brand at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, replenishing restroom supplies, and disinfecting high-touch areas including the front-end, sales floor and restrooms to help maintain merchandise, customer and Team areas., • Maintains a professional appearance and adheres to the Company's dress code at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, and replenishing restroom supplies to help maintain merchandise, customer and Team areas., • Performs daily assigned sizing and recovery per company best practice to ensure a neat, clean and organized store that is well-maintained and efficiently merchandised to standards., • Expedites newly received merchandise receipts to the sales floor with a sense of urgency, merchandising all items per company best practice to the monthly presentation guidelines and maintaining merchandise/brand name familiarity within departments to assist Customers., • Understands the Loss Prevention Awareness program, the Shortage Highway, the Store Protection Specialist (SPS) position (where applicable), and merchandise protection standards., • As a representative of Ross Inc., demonstrates integrity and honesty in all interactions with Associates and Customers. Safeguards confidential information, cash and credit card information, and merchandise., • Follows all Mark-Out-of-Stock (MOS) policies, including the identification of MOS merchandise, proper processing of each piece and the notification of Store Leadership to review and approve all disposals., • Follows all policies and procedures concerning cash, check, charge card and refund transactions, voids and offline procedures. Maintains a high level of awareness and accuracy when handling bankable tenders., • Demonstrates a sense of urgency to efficiently perform their role. Maximizes productivity by executing all Store best practices and minimizing steps and touches in their work flow. Competencies: • Manages Work Processes., • Business Acumen., • Plans, Aligns & Prioritizes., • Builds Talent., • Collaborates., • Leading by Example., • Communicates Effectively., • Ensures Accountability & Execution. Qualifications And Special Skills Required: • Effectively communicate with Customers, Associates and Store Leadership in a friendly, respectful, cooperative and pleasant manner., • Ability to perform basic mathematical calculations commonly used in retail environments. Physical Requirements/Ada: • Ability to use all Store equipment, including PDTs, registers and PC as required., • Ability to spend up to 100% of working time standing, walking, and moving around the Store., • Ability to regularly bend at the waist, squat, kneel, climb, carry, reach, and stoop., • Ability to occasionally push, pull and lift more than 25 pounds., • Ability to use janitorial equipment, rolling racks, ladders and other assigned supplies., • Certain assignments may require other qualifications and skills., • Associates who work Stockroom shifts: Ability to regularly push, pull and lift more than 20 pounds. Supervisory Responsibilities: None DISCLAIMER: This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. The base pay range for this role is $16.60 - $17.10. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location. Benefits offered to all Associates include Accident, Critical Illness, Vision, Auto, Home, and Pet insurance programs; Associate Discount, Identity Protection, Associate Purchase Program, Benefit Hub Discount Mall, Employee Assistance Program and Commuter Benefits, 401K (service requirements), Employee Stock Purchase Program, Ross Cares Fund, College Discounts, Sick Pay (where legally required) and Referral Bonuses. In addition, all Full-Time Associates, including FT Retail Associate, Area Supervisor, Assistant Store Manager and Store Manager, are eligible for extended benefits offered including Medical/Dental/Vision Health Insurance, Legal Insurance, Vacation Buy, Flexible Spending Account, Health Savings Account, Life/ADD Insurance, Long-Term Disability, Enhanced Maternity and Parental Leave Benefit, Vacation Pay accrued at a rate of 10 days/year after eligibility commences, 9 Personal and Company Holidays. AS, ASM and SM Associates in Stores and Exempt Corporate and Buying Office roles are also eligible to receive a Bonus based on individual and business performance.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: The Packaging Material Operator is responsible for the organization, storage, and supply of raw materials to filling and packaging equipment via an Industrial Truck for transportation. This position provides preforms that are fed to the blow molder, caps that are directed to the capper, and chemicals for cleaning in or around the filler. They maintain the cleanliness of their drive paths while assisting with operational activities to ensure minimal contributions to downtime. Duties also consist of chemical and material waste removal, including rejected packaging products. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate a variety of forklifts for moving and staging material or material waste., • Be able to clean and sort all used material as part of normal operating procedures in a neat and orderly fashion., • Maintain proper First In First Out (FIFO) rotation of raw materials, inventory, or assigned items., • See that all materials for finished and non-finished goods are properly stored, all the necessary paperwork is comprehensively filled out, and computer documentation has been completed in a timely manner., • Communicate with supervisor and filler operator consistently about inventory availability or any risks associated with upcoming production orders., • Adhere to placement of inventory in designated, labeled locations. Verify all supplies and inventory remain 18" from the walls. Consult management to determine necessary action if proper space is not available., • Ensure packaging infeed areas stay clean, orderly, and clear of debris at all times during or between production. Store materials in an audit ready manner at all times., • Conduct monthly and yearly housekeeping audits, while executing follow up actions to remain in specifications., • Learn how to operate downstream packaging equipment, processing equipment, or palletizing equipment as needed., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Must be able to coordinate packaging material needs effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Material Handler stands on and operates an industrial truck throughout the majority of their shift, sitting approximately one quarter of the time. The Material Handler walks on uneven concrete and tile surfaces in the packaging or material storage area. They may lift up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees work together for lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping – The Material Handler pushes/pulls filled bags when re-stacking a pallet. They push/pull while using brooms, dust mops, and brushes during cleanup duties. The Material Handler bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Material Handler may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Material Handler steps on and off the industrial truck and climbs stairs to access material pallets or infeed chutes. The Material Handler reaches below and/or above shoulder level when removing or adding bags to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Material Handler will engage in frequent use of hands and fingers for pressing industrial truck operating buttons, typing on a keyboard, opening material pallets, and cleaning up material waste. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $22—$23 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Warehouse Associate Join Our Dynamic Distribution TeamOverview Parksite and Atlantic plywood, a 100% employee-owned company, is seeking motivated and detail-oriented Warehouse Associates to join our growing distribution operations. This is an excellent opportunity for individuals who thrive in a fast-paced environment and want to build a career in the wholesale building materials industry. Whether you're an experienced warehouse professional or new to the field, we offer comprehensive training, competitive benefits, and real opportunities for advancement. Why Join Our Team? Build Your Career in a Thriving Industry • Work with industry-leading building materials and products, • Gain valuable skills in warehouse operations, inventory management, and logistics, • Opportunity to operate multiple types of forklifts and advanced warehouse technology, • Employee ownership through our Employee Stock Ownership Plan (ESOP) Comprehensive Benefits Package • 401(k) Program to secure your financial future, • Company-Paid Life Insurance, • Health, Dental, Vision, and Flexible Spending Insurance Plans, • Paid Holidays, • Paid Time Off (PTO), • Positive Work Environment with supportive team members, • Bonus Incentives for employee referrals Professional Development • Comprehensive forklift training and certification, • Training on state-of-the-art voice-picking systems, • Warehouse Management System (WMS) experience with Infor/CSD platforms, • Safety training and OSHA compliance education What You'll Do As a Warehouse Associate, you'll play a critical role in our daily operations, ensuring products are received, stored, and distributed efficiently and safely. This is a non-exempt, hourly position eligible for overtime in accordance with applicable law. Shipping & Order Fulfillment • Use voice-picking technology to accurately pick, pack, and prepare customer orders, • Assemble and verify orders for accuracy and quality before shipment, • Load outbound shipments and process orders using the Infor/CSD/WMS platform Receiving & Inventory Control • Unload and inspect inbound merchandise for accuracy and quality, • Check in products against purchase orders and apply SKU labels, • Move, sort, and store materials in designated locations for efficient retrieval Forklift & Equipment Operation • Safely operate sit-down forklifts, reach trucks, and cherry pickers after successful completion of company-provided training and OSHA-required certification, • Transport, stack, and store pallets following all safety guidelines Manufacturing • Operate and monitor manufacturing machinery to ensure efficient production, quality standards, and safe operation while performing routine inspections and adjustments as needed. Inventory Management • Assist with physical inventory and scheduled cycle counts, • Identify and report inventory discrepancies, • Maintain organized storage areas to support operational efficiency Safety & Housekeeping • Maintain a clean, organized, and safe work environment, • Wear required PPE including steel-toed boots, safety glasses, and gloves, • Follow all safety policies and report hazards or equipment issues immediately, • Work safely in indoor, outdoor, hot, and cold environments General Responsibilities • Follow company policies and supervisor instructions, • Collaborate with team members to meet productivity goals, • Perform additional duties as assigned, • Maintain a positive, customer-focused attitude What You BringRequired Qualifications: Education & Experience • High school diploma or GED preferred, • Minimum 3 months of warehouse experience or equivalent training/education, • Training provided for candidates new to warehousing Skills & Abilities • Basic English reading and writing skills sufficient to understand safety instructions, labels, and operating procedures. Basic math skills (addition, subtraction, multiplication, division), • Strong organizational skills with attention to detail, • Ability to work independently and as part of a team, • Dependable, punctual, and safety-focused Physical Requirements The physical requirements represent the essential functions of the role. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform these essential functions, in accordance with applicable law. • Ability to regularly lift up to 50 lbs. and occasionally up to 90 lbs., • Ability to stand, walk, bend, and reach for extended periods, • Comfortable working in indoor/outdoor environments, including hot and cold conditions, • Ability to safely operate warehouse equipment and machinery Pre-Employment Requirements • Ability to pass pre-employment physical, drug screen, and background check, • Authorization to work in the United States Preferred Qualifications: The following is a plus but not required - we're willing to train motivated candidates! • Forklift operation experience (sit-down, cherry picker, reach truck), • Voice-picking system experience, • Lumber or building product industry experience, • Receiving and shipping experience, • Inventory control experience, • WMS (Warehouse Management System) familiarity, • Previous experience in a distribution or warehouse environment Work Environment This position is in a warehouse distribution center with the following conditions: Physical Demands & Work Environment: • Frequent use of hands and feet for grasping, lifting, securing loads, and operating equipment controls, • Regular lifting, carrying, pushing, and pulling up to 50 lbs.; occasional lifting up to 90 lbs., • Frequent pushing and pulling of truck side-curtain walls and use of winches and ratchet straps for load securement, • Extended periods of standing and walking during scheduled shifts. Frequent bending, twisting, reaching, gripping, and handling materials such as pallets, panels, lumber, straps, and tools, • Occasional climbing, squatting, and kneeling to complete assigned tasks, • Extended operation of forklifts, including frequent mounting and dismounting during picking, staging, and loading, • Ability to work at varying heights when placing or retrieving product from racking, • Maintain balance, depth perception, and spatial awareness while operating forklifts in tight aisles and around moving equipment, • Exposure to bright lights, loud noise, dust, fumes, and varying temperatures, including hot and cold environments Schedule: • Full-time position, • Day shift schedule (typical warehouse hours), • Flexibility to work overtime during peak periods as needed About Our CompaniesParksite Parksite is a premier sales, marketing, and distribution company serving the building industry with a focus on both interior and exterior products. We supply top fabricators and building material dealers with category-leading products for residential, commercial, and remodeling markets. Our unique marketplace niche is education. We identify products with distinctive applications and educate architects, builders, and designers on their value. This approach has made us an industry leader with each product line we represent. We combine marketing expertise and industry knowledge to create demand for our supplier business partners. We help build brands. Atlantic Plywood Corporation (APC) Since 1974, Atlantic Plywood Corporation has delivered the highest quality and best value to our customers. This philosophy has helped us grow into a regional industry leader, distributing a wide range of quality hardwood plywood and panel products throughout the Eastern United States. Our many satisfied customers know that Atlantic Plywood offers not only dependable products and services but also a convenient, cost-effective partnership that helps their business grow. Career Growth Opportunities Starting as a Warehouse Associate opens doors to advancement within our organization: • Lead Warehouse Associate - mentor new team members and coordinate daily operations, • Inventory Control Specialist - focus on accuracy and efficiency improvements, • Warehouse Supervisor - manage teams and operations, • Shipping/Receiving Coordinator - oversee logistics and transportation, • Forklift Trainer - become certified to train other operators, • Logistics & Operations Management - advance into leadership roles, • CDL License - Potential to earn CDL License through company-sponsored training for qualified employees. Ready to Build Your Future with Us? Join a team where your hard work is recognized and rewarded. As a Warehouse Associate, you'll gain valuable skills, work with quality products, and become part of an employee-owned company that invests in your success. We are Equal Opportunity Employers committed to building diverse and inclusive teams. How to Apply If you're ready to join a dynamic team in the wholesale building materials industry, we want to hear from you! Apply today and take the first step toward a rewarding career with growth potential. Qualifications are a guide, not a checklist. If you think you can make an impact here, we want to hear your story. All warehouse positions require adherence to safety protocols, OSHA regulations, and company procedures. Associates must be able to work in varying environmental conditions and operate equipment safely. Monday - Friday 7:00AM - Until the work is finished.

Job Description The Clearance Center Team Member is responsible for daily operations of bailers used for salvage textiles and equipment upkeep. They are also responsible for rotating and maintaining the schedules for product table rotations. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Greets customers in a prompt, friendly, and courteous manner; assist customers with prices, location, and information on merchandise, ensuring 100% customer delight., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor)., • Responsible for the rotation of merchandise on sales floor., • Assist with quality control assurance., • Responsible for back room and floor recovery, cleaning as assigned., • Record sales using the cash register while properly packaging merchandise., • Asks every customer for a Round-up donation, maintains a minimum of 25% round up average., • Ensure accurate payment collection., • Maintain proper cash balance in assigned till per over/under policy., • Address customer concerns in a courteous and respectful manner, while following retail policies. Seek assistance of supervisor, when necessary, to resolve concerns., • Processes salvage and donations efficiently based on company needs and adapts to changes in commodities processing as assigned., • When applicable and as assigned, operates baler and other assigned equipment in a safe manner in accordance with organizational and safety policies and procedures., • As assigned, maintains accurate bale count., • Adhere to Goodwill’s Safety Standards while operating the Baler and while on duty as assigned, • Assist in efficient movement of goods in the warehouse to and from storage or production areas, and in the loading and unloading of trucks with general merchandise and donated goods with the aid of material handling equipment as needed., • Learns to operate assigned material handling equipment in a safe and prudent manner under general supervision, in accordance with the laws of the State of New York, organizational and safety policies and procedures., • Use of safe work procedures and personal protective equipment as required. (i.e. lifting, use of proper equipment, etc.). Reports incidents and injuries in a timely manner to the immediate supervisor., • Ensures that all items are processed accurately and that all saleable merchandise always makes it to the sales floor., • Performs any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At least 18 years of age. • Ability to work in non-climate controlled environments required, • Ability to exert maximum muscle force to lift, push, pull, or carry objects as required by job., • Ability to stand for extended periods of time, and to lift up to 40 pounds regularly, up to 60+ pounds occasionally. Might be required to lift up heavier goods with assistance., • Ability to work under general supervision. EDUCATION and/or EXPERIENCE: High school diploma or GED preferred. LANGUAGE SKILLS: Able to read and comprehend simple instructions, short correspondence and memos. Able to write simple correspondence. Communicate effectively with other employees of the organization. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to dust, molds and dirt particles. The employee regularly works in outside weather conditions. The noise level in the work environment is usually moderate to loud. Availability: Must have open and flexible availability, and be willing to work evenings and weekends. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to operate the baler, run the pallet truck and hydraulic lift; and stoop, kneel, crouch or bend in order to load and empty containers. Goodwill of the Finger Lakes and its subsidiaries encourage diversity in the workplace; we are an Equal Opportunity Employer. Minority/Female/Sexual Orientation/Gender Identity or Expression/Veteran/Disability

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: The Packaging Material Operator is responsible for the organization, storage, and supply of raw materials to filling and packaging equipment via an Industrial Truck for transportation. This position provides preforms that are fed to the blow molder, caps that are directed to the capper, and chemicals for cleaning in or around the filler. They maintain the cleanliness of their drive paths while assisting with operational activities to ensure minimal contributions to downtime. Duties also consist of chemical and material waste removal, including rejected packaging products. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate a variety of forklifts for moving and staging material or material waste., • Be able to clean and sort all used material as part of normal operating procedures in a neat and orderly fashion., • Maintain proper First In First Out (FIFO) rotation of raw materials, inventory, or assigned items., • See that all materials for finished and non-finished goods are properly stored, all the necessary paperwork is comprehensively filled out, and computer documentation has been completed in a timely manner., • Communicate with supervisor and filler operator consistently about inventory availability or any risks associated with upcoming production orders., • Adhere to placement of inventory in designated, labeled locations. Verify all supplies and inventory remain 18" from the walls. Consult management to determine necessary action if proper space is not available., • Ensure packaging infeed areas stay clean, orderly, and clear of debris at all times during or between production. Store materials in an audit ready manner at all times., • Conduct monthly and yearly housekeeping audits, while executing follow up actions to remain in specifications., • Learn how to operate downstream packaging equipment, processing equipment, or palletizing equipment as needed., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Must be able to coordinate packaging material needs effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Material Handler stands on and operates an industrial truck throughout the majority of their shift, sitting approximately one quarter of the time. The Material Handler walks on uneven concrete and tile surfaces in the packaging or material storage area. They may lift up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees work together for lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping – The Material Handler pushes/pulls filled bags when re-stacking a pallet. They push/pull while using brooms, dust mops, and brushes during cleanup duties. The Material Handler bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Material Handler may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Material Handler steps on and off the industrial truck and climbs stairs to access material pallets or infeed chutes. The Material Handler reaches below and/or above shoulder level when removing or adding bags to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Material Handler will engage in frequent use of hands and fingers for pressing industrial truck operating buttons, typing on a keyboard, opening material pallets, and cleaning up material waste. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $22—$23 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. .job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Packaging Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is eligible for bonus. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $24—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Home Health Aide or Patient Care Aide Batavia, NY Join a team that’s as passionate about patient care as you are! We’re looking for HHA's and PCA's in the Rochester area to serve the needs of our home health patient’s. Create your own flexible Schedule, get Same-Day Pay, with No Catch. We Offer: • $18.65 - $20.00 hourly pay, • Daily/Weekly Pay, • Flexible scheduling- Per Diem, • 24/7 Access to friendly staff, • Discounted benefits through Mylo, • Direct Deposit, • Bonus Opportunities, • No 1099 Tax Filing- You are an employee of NurseCore If you want more variety in your day-to-day work, we can help! At Nursecore we are passionate about connecting healthcare professionals and nurses with the medical positions that fit their lifestyle in great facilities. Apply today to be rewarded with the great opportunities Nursecore has to offer! For our HHAs / PCAs every day is different. As an HHA / PCA with NurseCore you will provide basic patient care in a medical facility or the patient’s home. Because of your extensive daily contact with each patient, you play a key role in keeping the nurses up to date on vital information about the patients' conditions. You will be responsible for providing quality healthcare to each patient in adherence with all applicable laws, regulations, and policies. Responsibilities: • Evaluates the safety of the delivery of care in the home environment in adherence to all applicable laws, regulations and policies., • Provides care in compliance with the assigned care plan and RN delegation., • Recognizes changes in the patient’s condition and communicates with the RN supervisor., • Provides total or assisted personal care, assistance with meals, mobility assistance, light housekeeping, and companion services., • Practices safety and universal precautions, infection control and uses appropriate protective equipment to protect patients and self., • Attends/ completes all assigned in-services and trainings., • Performs other duties as assigned. Qualifications: • High school diploma or equivalent, • At least 18 years of age, • Current HHA/PCA licensure in the State of New York, • 1-year experience preferred within 3 years Who We are at Nursecore Nursecore is more than an agency, we’re a family. We take great pride in the compassionate nature of our leadership team and the development opportunities offered to our nurses and caregivers. Our team works locally in each city and surrounding areas to make lasting partnerships with both facilities and caregivers that improve the lives of those within their communities. We would love for you to work with us and build a lasting relationship. Why NurseCore? Our health professionals are the heart of NurseCore. That’s why we are happy to offer you competitive pay, benefits, a mobile app for timesheets, and access to our elite 24/7 caregiver support staff. NurseCore provides benefits including health insurance and immediate employment and income verification through Equifax. Some agencies and mobile apps contract (1099) staff. We employ (W2) our health professionals providing them coverage under our liability insurance, employer-paid taxes, overtime, and holiday pay*. We aim to assure you the best working and PRN experience with our team. NurseCore is made exceptional by our commitment to founding principles of professional and compassionate nursing services and leadership. To keep to our promise of quality and professionalism, we require all our applicants consent to a background check, and drug screen. #INDRAS Powered by JazzHR xcjvtlZDx9

Job Description Seeking primarily day and evening shifts, with limited overnight shifts available. Training in person up 2 to 4 weeks, possibility of remote work available after 30 days of employment. A Community Connector is a client-focused position responsible for providing an assessment, problem solving and referral assistance for clients with complicated needs. A successful Community Connector uses empathy, advocacy, and cultural competence to help clients access the services needed to build and sustain healthy lives. This position requires a creative intellectual with critical thinking skills and a desire to help those in need. Under the general supervision of the 211/LIFE LINE Supervisor, handles incoming contacts to the contact center on various assigned information & referral and customer service contracts: answering all contacts, collecting and documenting all required data and offering all applicable resources and referrals to clients. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform in-depth screening for community programs for the purpose of educating, navigating, and connecting clients with needed services., • Answer all assigned contacts (phone, chat, text); identify and accurately refer clients to appropriate community resources which may address the client’s additional health and social needs., • Use active listening skills and conversational intent to: develop a strategy that identifies solutions to barriers to access, provide high-quality confidential connections to resources and services, demonstrate objectivity and empathy and be non-judgmental and neutral in handing all contacts., • Must be able to maintain strict confidentially of sensitive information., • Utilize prescribed software to accurately document all client interactions., • Obtain and document all required data according to established policy, protocol and procedure to assist in the identification of gaps in services that can be addressed., • Must be available to work rotating shifts including nights and weekends and be flexible to backfill shifts as necessary., • Attend and participate actively in all required in-service and other department meetings., • Conduct consumer satisfaction surveys and follow up accordingly., • Keep all activities in line with the core values and contribute to the positive culture of Goodwill of the Finger Lakes., • Contributes to the overall effectiveness of the 211/LIFE LINE Program by completing all other tasks as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. Candidate required to obtain AIRS Certified Information & Referral Specialist status, and maintain certification through attending trainings and reading industry materials. Additionally, must obtain these certification within 2 years of eligibility (following AIRS eligibility criteria). Maintenance of certification through employment required. EDUCATION and/or EXPERIENCE: Associates Degree in related field. One-year experience in customer service and/or Call Center industry. Or an equivalent combination of education and experience. LANGUAGE SKILLS: Ability to clearly communicate concepts, processes and methods to enhance learning and skill building. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. OTHER SKILLS AND ABILITIES: • High level of proficiency in web-based systems, real time communication systems (i.e. chat/text), Microsoft Office, and other client record management systems. Able to troubleshoot basic technical issues., • Adaptable and able to move with change while maintaining a positive attitude., • Excellent interpersonal skills: Diplomatic, team-oriented approach., • Self-directed to take initiative in follow-up and resolution of daily issues., • Innovative, forward thinker – able to think outside the box., • Experience with softphone and software systems commonly used for Contact Center applications a plus. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to openly communicate. The employee frequently is required to use hands to finger, handle, or feel objects or keyboard and reach with hands and arms. The employee is occasionally required to stand, walk, and sit. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. 211/LIFE LINE is a 24/7 operation open 365 days per year with a variety of shifts available. Work schedule may include evenings, overnights, weekends, and holidays. Schedule may be changed as necessary to meet the needs of 211/LIFE LINE’s clients. Required to be responsive and available for shifts as much as 12 hours in length during call surges and declared emergencies. 211/LIFE LINE is a hybrid work environment. The possibility of remote work is dependent on performance, reliability, and a private workspace. The noise level in the office is usually moderate. Goodwill of the Finger Lakes and its subsidiaries encourage diversity in the workplace; we are an Equal Opportunity Employer. Minority/Female/Sexual Orientation/Gender Identity or Expression/Veteran/Disability

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others!

Job DescriptionDescription: Summary: Under the supervision of the Clinical Supervisor of Health Home Plus and HARP, the HARP/Health Home Plus Care Manager will provide care management services to program participants who are in need of assistance with medical, behavioral health, and/or social services in the community. Essential Functions: Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Identify individuals in the community in need of obtaining medical behavioral health and/or social services., • Ensure the completion of the Eligibility Assessment for HARP enrolled members to determine HCBS eligibility within 10 business days, but no longer than 21 business days after Health Home enrollment., • HARP/Health Home Plus Care Manager will perform work associated with promoting and restoring the health of Health and Recovery Plan (HARP) members by identifying member care requirements, documenting, and ensuring maximal access to high quality care across the continuum., • Collaborate with Member, Health Homes, physicians, other interdisciplinary team members, and family members and/or supportive others to support and sustain the Member’s wellness and recovery goals., • Ensure the completion of the Eligibility Assessment for Health Home Plus., • Maintain regular contact with the program participants, including home visits., • Prepare a Plan of Care which includes a participant’s goals based on the needs and the required Health Plan Summary in addition to the HHUNY Plan of Care., • Maintain and update all client records, assessments, and care plans., • Work collaboratively with outside providers and team members to ensure program guidelines and deadlines are met., • Attends all staff meetings and formal/informal trainings session in/outside the agency., • Is available to work outside of regularly scheduled work hours as signed., • Identify individuals in the community in need of obtaining medical behavioral health and/or social services. Face-to-face visits, with clients, in the community are a requirement of this program., • Maintain regular contact with the program participants, including home visits., • Maintain and update all client records, assessments, and care plans., • Work collaboratively with outside providers and team members to ensure program guidelines and deadlines are met., • Maintains an active caseload of 25+ Authority: This employee exercises some independence in establishing his/her schedule for meetings with program participants, other caseworkers, and community agencies. The individual must be resourceful and able to display initiative and understanding of the agency’s policies, procedures, and regulations as well as exercises initiative in setting priorities to task and in making decisions. Must keep immediate supervisor abreast of issues and concerns which merit intervention from higher level management staff. Requirements: Position Qualifications: Competency Statement(s) • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Accuracy - Ability to perform work accurately and thoroughly., • Client Oriented - Ability to take care of the clients’ needs while following company procedures., • Detail Oriented - Ability to pay attention to the minute details of a project or task., • Developing Others-Ability to teach or foster the development of others, giving constructive feedback and reassurance after problems., • Diversity Oriented - Ability to work effectively with people regardless of their age, gender, race, ethnicity, religion, or job type., • Ethical - Ability to demonstrate professionalism conforming to a set of values and accepted standards., • Interpersonal-Ability/desire to understand others’ attitudes/interests/needs/nonverbal behavior, listening skills, and understanding strengths/limitations of others., • Reliability - The trait of being dependable and trustworthy., • Communication, Oral - Ability to communicate effectively with others using the spoken word., • Communication, Written - Ability to communicate in writing clearly and concisely. Education and Experience: • A bachelor´s degree in any of the following: child & family studies, community mental health, counseling, education, nursing, occupational therapy, physical therapy, psychology, recreation, recreation therapy, rehabilitation, social work, sociology, or speech and hearing; OR, • NYS licensure and current registration as a Registered Nurse and a bachelor´s degree; OR, • A Bachelor´s level education or higher in any field with five years of experience working directly with persons with behavioral health diagnoses; OR, • A Credentialed Alcoholism and Substance Abuse Counselor (CASAC) OR, • Two years of experience (a Master´s degree in a related field may substitute for one year´s experience) either OR, • Providing direct services to persons diagnosed with mental disabilities, developmental disabilities, alcoholism or substance abuse, OR, • Linking persons who have been diagnosed with mental disabilities, developmental disabilities, alcoholism or substance abuse to abroad range of services essential to successfully living in a community setting. Physical Demands: The position does require occasional standing, squatting, and lifting up to approximately 50 lbs.

Job Description Lead High-Performance Manufacturing. Build Great Teams. Drive Operational Excellence. Are you an experienced CNC machining professional with a passion for leadership, precision manufacturing, and continuous improvement? Our client, a well-established precision manufacturing organization in the Rochester, NY area, is seeking a Production Supervisor to lead a skilled team of machinists while overseeing the day-to-day operations of a fast-paced shop environment. This is an outstanding opportunity for a hands-on manufacturing leader who enjoys mentoring employees, solving complex machining challenges, improving efficiencies, and ensuring the highest standards of quality for aerospace and other highly regulated industries. If you thrive in an environment where precision, accountability, innovation, and teamwork are valued, we'd love to speak with you, apply today! CNC Supervisor - (Aviation / Aerospace / Defense & Government Industry) Multiple Positions Available! Base Pay Rate: $70,000 to $100,000/yr. plus overtime compensation, and shift differential % for B shift only, on top of base rate. Position Type: Direct Hire Location: Rochester, NY Shift Schedule: Monday-Friday (A & B Shifts Available) Position: Full-TimeOvertime: Available, if needed A Shift: Monday through Friday (7 or 7:30AM) to (3:30pm or 4pm) est B Shift: Monday through Friday (3pm to 11:30pm) or (2:00pm to 10:30pm) Job Summary: As the CNC Supervisor, you will be responsible for the daily leadership, scheduling, technical support, performance reviews, meeting production timelines, and operational performance of the CNC Lathe machining department. You'll work closely with CNC Lathe Machinists, Swiss Operators, Programmers, Engineering, Quality, and Production scheduling team to ensure customer requirements are met while maintaining exceptional quality, safety, and productivity standards. Lead and supervise a team of CNC Lathe Operators, Setup Machinists, Programmers ensuring quality standards are being met. Conduct performance reviews, disciplinary actions, as needed, managing shift schedules, production floor scheduling assistance, as needed. Job Responsibilities: • Lead the daily operations of the machining Department to achieve production schedules, delivery commitments, and departmental performance goals., • Coordinate workflow, staffing, machine capacity, and priorities to maximize productivity while maintaining quality standards., • Monitor production throughout each shift and proactively address bottlenecks that could impact customer deliveries., • Evaluate workloads and adjust staffing and machine utilization based on changing production demands., • Track department performance using key production metrics and recommend improvements., • Ensure all machined components meet engineering drawings, customer specifications, and aerospace quality requirements., • Verify compliance with blueprint specifications, geometric dimensions and tolerance (GD&T), and process documentation., • Support first article inspections, in-process inspections, and final inspections as required., • Drive initiatives focused on reducing scrap, rework, and non-conforming product., • Promote a culture of quality and continuous process verification throughout production., • Provide day-to-day leadership, coaching, mentoring, and technical guidance to CNC machinists and operators., • Assign work based on production priorities, employee skill level, and machine availability., • Train new employees while supporting the continued development of experienced machinists., • Assist with employee performance evaluations, skill development plans, and cross-training initiatives., • Foster a positive, collaborative, and accountable team environment focused on safety, quality, and continuous improvement. Requirements • Must be able to Program, set up, troubleshoot, and optimize CNC Swiss Lathe machines for complex machined components., • Over 6 years of experience operating, setting up, and programming CNC Swiss Lathe machines., • 3 years of prior CNC Supervisory experience, required., • Skilled with precision measuring equipment and tools, required., • Must have prior supervisory experience responsible for managing various CNC shift schedules, ensuring coverage, performance reviews, training and mentoring machinists, ensuring quality output and machine uptime is being met., • Must be able to edit and improve CNC programs utilizing G-code and M-code while identifying opportunities to reduce cycle times and improve process efficiency., • Select appropriate tooling, cutting parameters, fixtures, and machining strategies to maximize productivity and tool life., • Troubleshoot machining issues, equipment malfunctions, tooling concerns, and process inconsistencies while minimizing downtime., • Partner with Manufacturing Engineering to improve machining processes, manufacturability, and production efficiency., • Able to read and interpret engineering blueprints, GD&T to meet customer specifications., • High School Diploma, GED, is required. Technical School or Vocational Training and/or Certification, desired., • Must be able to commute to the office daily. (Rochester, NY), • Able to read and interpret engineering blueprints and schematics. Total Rewards Include • Competitive base rate, based on experience, • Comprehensive Medical, Dental & Vision Insurance, • Company-paid Life Insurance, • 401(k) Plan, with employer matching contributions, • Paid Time Off and Paid Holidays, • Career advancement opportunities, • Ongoing technical training and professional development, • Modern, climate-controlled manufacturing facility, • Stable, growing organization serving highly regulated industries Apply Today! Equal Opportunity Employer: Cure Consulting Solutions, LLC is an Equal Opportunity Employer. We consider applicants for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, marital status, domestic violence victim status, or any other status protected by applicable federal, state, or local law. Reasonable Accommodation: Cure Consulting Solutions, LLC is committed to providing reasonable accommodation to qualified individuals with disabilities and disabled veterans in the job application process and, where appropriate, during employment. Applicants who require an accommodation to participate in the application or hiring process should contact Cure at support@cureconsultingsolutions.com. Pay Transparency: In accordance with New York State pay transparency requirements, the expected compensation range for this position is $70k/yr. to $100k/yr. The actual rate offered will be based on job-related factors such as experience, skills, qualifications, internal equity, and business needs. This position may also be eligible for benefits and employee perks in addition to base pay compensation. This job description is intended to describe the general nature and level of work performed by employees assigned and hired by our client as their employer for this role. It is not intended to be an exhaustive list of all responsibilities, duties, qualifications, or working conditions. Cure Consulting Solutions, LLC does not charge any recruiting or service fees to candidates; all fees are employer paid only.

Job Description Job Title: Speech Language Pathologist - Per Diem Location: CP Rochester and Happiness House Outpatient Clinics Hourly Rate: $31.59-$39.37 commensurate with experience Employment: This is a per diem position. Days and hours of work are Monday through Friday variable each day during clinic business hours (8:00am-4:30pm) Summary/Objective: Responsible for the diagnosis and treatment of speech and/or language disorders of the individuals enrolled in or referred to CP. Required Education and Experience: • Master’s Degree in Speech-Language Pathology., • New York State License in Speech Pathology or be eligible for a New York State License in Speech Pathology., • Certificate of Clinical Competence in Speech Pathology awarded by the American Speech-Language-Hearing Association preferred., • Current knowledge of the principles and methods of prevention, assessment, and intervention for people with communication and swallowing disorders, including consideration of anatomical/physiological, psychological, developmental, and linguistic and cultural correlates., • Experience working with individuals with development disabilities preferred., • Must have demonstrated excellent listening skills., • Must have excellent oral and written communication skills., • Valid NYS Driver’s License., • Proficient computer, • skills with knowledge of Microsoft Office programs., • Must have demonstrated commitment to performing job duties and tasks at a high level of performance. Competency Requirements: • Communication Proficiency., • Ethical practice., • Collaboration Skills, • Customer/Individual Focus, • General, Verbal and Numerical Intelligence Essential Functions: • Promotes the CP Rochester and the Happiness House Vision, Mission and Philosophy., • Upholds NYS Education Law/Practice Act as relating to the practice of speech therapy., • Maintains confidentiality of information relating to individuals and their families in accordance with agency policy., • Performs appropriate evaluations to individuals to determine the need for speech therapy services., • Ensures valid prescriptions are written for all individuals on caseload., • Carries out treatment plans developed after evaluation, in clinic setting for the Article 16 and Article 28 outpatient clinics as well as the Preschool or School Programs, as necessary., • Available to consult with other professionals such as teachers, habilitation staff, as well as other members of the interdisciplinary team as appropriate, to facilitate delivery of coordinated quality services to individuals., • Works with legal guardians, house staff or parents as integral members of the interdisciplinary team in the clinic, day habilitation or school setting, as needed., • Communicates with physicians and other medical personnel in order to facilitate evaluation and treatment of individuals., • Completes all paperwork in accordance with agency, program and department policies/guidelines., • Ensures knowledge of paperwork, Electronic Health Record and applicable Medicare and Medicaid regulations in order to provide appropriate documentation., • Attends all team, discipline and staff meetings as designated., • Maintains treatment area in an orderly manner to ensure safety., • Advises Supervisor of Clinical staff of need for replacement of old or ordering of new equipment., • Meets with interdisciplinary team and Program Supervisor as needed to review status and need of program modifications for individuals on caseload., • Establishes short- and long-term objectives for each individual., • Provides individual and/or group therapy at various certified sites to individuals exhibiting communication disorders, upon receipt of a physician’s prescription, as required. Provides speech language therapy services at off-site locations as assigned., • Provides in-service education to employees of CP, caretakers, and other interested groups as requested., • Participates in program planning, development, research, and evaluation under the direction of the department supervisor., • Participates in supervised field placement for university affiliated speech language therapy students as assigned., • Adheres to Agency’s policies and procedures as well as department guidelines., • Participates on committees, attends conferences, workshops and in-service training as needed or recommended to enhance job skills and personal growth and development., • Performs other duties at the discretion of the President/CEO or his/her designee. Supervisory Responsibility: None. May supervise a Speech Language Pathologist intern from an accredited institution periodically. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Work Environment: This job operates in an outpatient clinic program environment. This role routinely uses standard office equipment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 50 pounds. Ability to pull and push wheelchairs up to *250 – 300 pounds – maximum weight required. Travel: Travel is primarily local during the business day, but employee will be expected to work at any of our partner agencies. Some out-of-the-area and overnight travel may be expected. The listed base pay range is a good faith representation of current potential base pay for successful applicants. It may be modified in the future. Pay is determined by factors including experience, relevant qualifications, internal equity, and location.

Job Description Job Title: Speech Language Pathologist – Outpatient Clinic Location: CP Rochester – Winton Road Facility, Rochester, NY Salary Commensurate with experience: $61,600 - $78,000 per year for a licensed SLP This position is eligible for a $6,000 signing bonus! This bonus is earned and payable as follows: 25% ($1,500) in the pay period following the 6-month anniversary of your employment; 25% ($1,500) in the pay period following the one-year anniversary of your employment; and 50% ($3,000) in the pay period following the two-year anniversary of your employment. Employment: This is a full-time 37.5 hours per week position. Days and hours of work are Monday through Friday during business hours. Evening work may be required as job duties demand. Summary/Objective: Responsible for the diagnosis and treatment of speech and/or language disorders of the individuals enrolled in or referred to CP Rochester. Required Education and Experience: • Master’s Degree in Speech-Language Pathology., • New York State License in Speech Pathology or be eligible for a New York State License in Speech Pathology., • Certificate of Clinical Competence in Speech Pathology awarded by the American Speech-Language-Hearing Association preferred., • Current knowledge of the principles and methods of prevention, assessment, and intervention for people with communication and swallowing disorders, including consideration of anatomical/physiological, psychological, developmental, and linguistic and cultural correlates., • Experience working with individuals with development disabilities preferred., • Must have demonstrated excellent listening skills., • Must have excellent oral and written communication skills., • Valid NYS Driver’s License., • Proficient computer skills with knowledge of Microsoft Office programs., • Must have demonstrated commitment to performing job duties and tasks at a high level of performance., • Competency Requirements:, • Communication Proficiency., • Ethical practice., • Collaboration Skills, • Customer/Individual Focus, • General, Verbal and Numerical Intelligence Essential Functions: • Promotes the CP Rochester and the Happiness House Vision, Mission and Philosophy., • Upholds NYS Education Law/Practice Act as relating to the practice of speech therapy., • Maintains confidentiality of information relating to individuals and their families in accordance with agency policy., • Performs appropriate evaluations to individuals to determine the need for speech therapy services., • Ensures valid prescriptions are written for all individuals on caseload., • Carries out treatment plans developed after evaluation, in clinic setting for the Article 16 and Article 28 outpatient clinics as well as the Preschool or School Programs, as necessary., • Available to consult with other professionals such as teachers, habilitation staff, as well as other members of the interdisciplinary team as appropriate, to facilitate delivery of coordinated quality services to individuals., • Works with legal guardians, house staff or parents as integral members of the interdisciplinary team in the clinic, day habilitation or school setting, as needed., • Communicates with physicians and other medical personnel in order to facilitate evaluation and treatment of individuals., • Completes all paperwork in accordance with agency, program and department policies/guidelines., • Ensures knowledge of paperwork, Electronic Health Record and applicable Medicare and Medicaid regulations in order to provide appropriate documentation., • Attends all team, discipline and staff meetings as designated., • Maintains treatment area in an orderly manner to ensure safety., • Advises Supervisor of Clinical staff of need for replacement of old or ordering of new equipment., • Meets with interdisciplinary team and Program Supervisor as needed to review status and need of program modifications for individuals on caseload., • Establishes short- and long-term objectives for each individual., • Provides individual and/or group therapy at various certified sites to individuals exhibiting communication disorders, upon receipt of a physician’s prescription, as required. Provides speech language therapy services at off-site locations as assigned., • Provides in-service education to employees of CP, caretakers, and other interested groups as requested., • Participates in program planning, development, research, and evaluation under the direction of the department supervisor., • Participates in supervised field placement for university affiliated speech language therapy students as assigned., • Adheres to Agency’s policies and procedures as well as department guidelines., • Participates on committees, attends conferences, workshops and in-service training as needed or recommended to enhance job skills and personal growth and development., • Performs other duties at the discretion of the President/CEO or his/her designee. Supervisory Responsibility: None. May supervise a Speech Language Pathologist intern from an accredited institution periodically. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Work Environment: This job operates in an outpatient clinic program environment. This role routinely uses standard office equipment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 50 pounds. Ability to pull and push wheelchairs up to *250 – 300 pounds – maximum weight required. Travel: Travel is primarily local during the business day, but employee will be expected to work at any of our partner agencies. Some out-of-the-area and overnight travel may be expected. Competitive pay rates and flexible benefit package to include: • Affordable Medical / Dental / Vision Insurance, • Paid Time Off starting at 17 days per year, • Paid sick leave, • 9 Paid Holidays, • 403(b) Retirement Plan with employer match, • Additional Insurance Offerings – Voluntary Short-Term Disability, Specified Disease Insurance w/ Cancer Rider, Accident Insurance, Identity Theft Protection, • Employer Paid Health Reimbursement Arrangement (high deductible medical plan), • Employer paid Life Insurance, Short-term and Long-term Disability Insurance, • Tuition Reimbursement plus a 25% Tuition Discount for benefit-eligible Employees and Family Members at Roberts Wesleyan College Apply: https://recruiting.myapps.paychex.com/appone/MainInfoReq.asp?R_ID=6948206 The listed base pay range is a good faith representation of current potential base pay for successful applicants. It may be modified in the future. Pay is determined by factors including experience, relevant qualifications, internal equity, and location. EEO Statement: The agencies are equal opportunity employers. We do not discriminate against employees or applicants in the hiring, promotion, compensation, placement, termination, layoff, recall, transfer, leaves of absence or any other term or condition of employment on the basis of race, color, religion, sex, sexual orientation, gender identity/expression, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran, domestic violence victim status, prior arrest and conviction records or any other protected category in accordance with applicable federal, state and local laws.

Burger King is seeking a Cook I (Food & Beverage) team member to prepare food items, maintain kitchen operations, and ensure food quality and safety standards are met. Cooks are responsible for preparing menu items such as burgers, chicken sandwiches, fries, and breakfast items according to company recipes and procedures. Employees operate grills, fryers, and other kitchen equipment, assemble food orders, restock kitchen inventory, clean kitchen stations, and maintain food safety and sanitation standards. This position typically pays $14 to $18 per hour, with opportunities for overtime pay, night shift pay differential, holiday pay, and performance-based raises depending on location and experience. Cooks are responsible for preparing food quickly and accurately, monitoring food quality, maintaining proper food temperatures, stocking kitchen ingredients, cleaning kitchen equipment and workstations, assisting with deliveries, and following company food safety and sanitation procedures. Employees must work efficiently during busy periods and communicate with team members to ensure orders are completed on time. Full-time and part-time employees may be eligible for benefits including flexible scheduling, employee meal discounts, paid time off for eligible employees, health insurance for full-time employees, and opportunities for advancement into Shift Leader, Kitchen Supervisor, or Assistant Manager roles. Some locations may also offer performance bonuses or referral bonuses.

Job DescriptionDescription: The health services that became the Anthony L Jordan Health Corporation (Jordan Health) began more than 100 years ago, in 1904. As one of the first 5 Federally Qualified Health Centers (FQHC) established in the nation, its roots are steeped in service to those who face barriers to health and health care, meeting their need for comprehensive medical, dentistry, behavioral health, and community services. Starting in northeast Rochester, NY, Jordan Health has since expanded to become a network of primary care offices and health centers serving residents living in three quadrants of Rochester, NY and in Canandaigua, N.Y. Jordan Health is now seeking a Practice Manager (PM) who, under the guidance of the Director of Nursing, is primarily responsible for providing leadership, oversight, and management of Anthony L. Jordan Health’s Holland Street Adult Medicine and Urgent Care Center. This role is accountable for the operational, clinical, and performance management of services delivered within Federally Qualified Health Center (FQHC) environment. The PM supervises clinical support staff and works collaboratively with providers and interdisciplinary team members to ensure the delivery of efficient, high-quality, patient-centered care aligned with the mission of Anthony L. Jordan Health Corporation. If you want to apply your specialized experience and education in an environment where you can make a difference and significantly impact patients’ quality of life, please consider our Practice Manager opportunity. Requirements: The Practice Manager will ensure that: · Jordan Health patients receive high quality, consistent, competent, patient-centered care. · Efficient clinic operations are met · They develop high-performing staff · Financial and regulatory goals are achieved · Population health goals are advanced Education And Experience Required: · Minimum two years of management experience. · Clinical experience with Family Medicine/Behavioral Health preferred. · Preferred: Bachelor’s Degree in nursing or equivalent allied health field with experience as a manager/supervisor. · Excellent computer skills a must, preferably with an electronic health record. Licenses And Certifications Required: · Valid NYS RN License with no negative actions. · Current provider BLS/CPR through the American Heart Association. · Infection Control Certificate. · NYS RN Registration Certificate · Valid NYS driver’s license and reliable transportation Benefits: Jordan Health offers a competitive salary and full benefits offering including medical, dental, vision, life insurance, and 403b retirement plan. We offer Professional Development allowance. Jordan Health offers equal opportunities to all persons without regard to race, color religion, age, sex, disability, national origin, ancestry, citizenship, military or veteran status, marital status, sexual orientation, domestic violence victim status, predisposing genetic characteristics or genetic information, or any other status protected by law. About Jordan Health: Jordan Health is an independent FQHC, with Level III Patient-Centered Medical Home (PCMH) designation through the National Committee on Quality Assurance. Jordan Health receives funding from the Health Resources and Services Administration (HRSA) of the U.S. Department of Health and Human Services. Jordan Health is a network of outpatient primary care offices with providers who follow a panel of patients. While independent, Jordan Health actively collaborates with the major hospital and healthcare systems in our operating area to provide a total safety net of healthcare services.

Job DescriptionDescription: Summary: Under the supervision of the HCBS program Supervisor, the prevocational Coordinator will provide supervision, assistance and training to the prevocational program participants. Ensure implementation and coordination of the individual pre-vocational plan and responsibility for the delivery of quality services. Essential Functions: Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Reports directly to the HCBS program Supervisor., • Provides supervision, assistance, and training to the participants., • Ensures participants satisfaction with the pre-vocational services., • Maintains communication log daily and assigns tasks to participants., • Schedules and conducts required fire drills and safety requirements., • Responsible for the security of the building. Opens and closes the store daily., • Maintains on going communication with the program participant’s families and/or providers., • Assist program participants in developing marketing tools and strategies for the El camino cafe., • Completes daily notes and monthly summaries for each participant., • Tracks attendance of program participants and submits payroll reports bi-weekly to Finance., • Responsible to ensure the program meets State and Federal standards., • Attends life plans meetings for all participants when scheduled., • Based on the life plan outcome, responsible for developing and implementing Pre-Voc Plans for each participant., • Completes and submits monthly or weekly billings for OPWDD, Finance and Supervisor., • Ensures the pre-vocational plans are followed., • Submits work orders as needed., • Reports and completes notables as necessary., • Completes monthly grocery shopping for the store., • Schedules and conduct monthly participant meetings., • Maintains all participants’ files up to date per requirements., • Attends all training courses and obtains certifications as required for the position., • Assit El camino café supervisor as a backup level 1 certification., • Greeting customers with a smile, take orders, and prepare a variety of hot and cold coffee drinks and pastries., • Maintain a clean and organized coffee bar, ensuring quality and presentation., • Open the cafe each morning, prepping equipment, brewing coffee, and stocking supplies when necessary., • All other duties as assigned by the supervisor. Authority: This position exercises considerable initiative and independence in setting goals, accomplishing activities and completing consumer outcomes. Under the general supervision of the HCBS Program Supervisor, the Prevocational Coordinator will maintain a professional and responsible work environment for the program. Requirements: Position Qualifications: Competency Statement(s) • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Accuracy - Ability to perform work accurately and thoroughly., • Customer Oriented - Ability to take care of the customers’ needs while following company procedures., • Detail Oriented - Ability to pay attention to the minute details of a project or task., • Developing Others-Ability to teach or foster the development of others, giving constructive feedback and reassurance after problems., • Diversity Oriented - Ability to work effectively with people regardless of their age, gender, race, ethnicity, religion, or job type., • Ethical - Ability to demonstrate professionalism conforming to a set of values and accepted standards., • Interpersonal-Ability/desire to understand others’ attitudes/interests/needs/nonverbal behavior, listening skills, and understanding strengths/limitations of others., • Leadership- Ability to Motivate, influences, and support others to accomplish team and organizational goals., • Reliability - The trait of being dependable and trustworthy., • Teamwork – Ability to work cooperatively and effectively with others, being part of a formal/informal team, solicits input, credits others, may require group conflict resolutions skills and/or motivating others., • Communication, Oral - Ability to communicate effectively with others using the spoken word., • Communication, Written - Ability to communicate in writing clearly and concisely. Skills and Abilities: • Associate’s degree in Human Services OR, • 2 years’ Experience working with community human service providers and working with Developmentally Disabled population., • Current NY State Driver’s License., • Retail and marketing experience., • Bilingual in English/Spanish., • A combination of training and experience other than the specified, if judged to be adequate for the job, may be accepted by the President and CEO Physical Demands: The position does require occasional standing, squatting, lifting of up to approximately 40 lbs. By Signing below I have received, read, understand and will comply with the above job description: Employee Signature: Date: The Company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. EEO/AA Employer Revised 7/2013;1/2026

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job Description Position Summary Reporting to Manufacturing Leadership, the Senior Manufacturing Supervisor is responsible forleading manufacturing operations and teams to achieve production, quality, safety, and efficiencygoals while driving operational excellence through Lean Daily Management. This role is responsible for implementing process improvements, executing change initiatives, andeffectively managing labor resources to enhance efficiency, quality, and safety. With a proven trackrecord in lean methodologies and manufacturing leadership, the supervisor will foster a culture ofcontinuous improvement and accountability, ensuring the organization remains agile, responsive,and competitive in a dynamic production environment. Key Responsibilities • Oversee daily manufacturing operations to ensure production schedules, quality standards,yield targets, and safety requirements are consistently achieved or exceeded., • Lead, coach, and develop manufacturing teams of up to 25 employees, fostering a culture ofengagement, accountability, and continuous improvement., • Execute Lean Daily Management practices and apply lean manufacturing tools to eliminatewaste, improve efficiency, and streamline operations., • Analyze production data, performance metrics, and KPIs to identify trends, implementcorrective actions, and drive operational improvements., • Manage labor planning and resource allocation to ensure optimal staffing levels and efficientoperational performance., • Partner with Quality, Engineering, Supply Chain, Maintenance, Human Resources, Facilities,Occupational Health, Security, and other stakeholders to support manufacturing objectives., • Ensure compliance with company policies, safety regulations, quality requirements, andmanufacturing procedures., • Communicate operational performance, challenges, and improvement initiatives to leadershipwhile supporting business-critical decision-making. Requirements • Bachelor's Degree (Technical or Business-related field preferred), • 5+ years of manufacturing experience in a regulated manufacturing environment., • 10+ years of experience leading teams, managing employee performance, training, payroll, staffing, and employee relations. • Advanced knowledge of lean manufacturing principles, implementation, and practical application of tools such as Value Stream Mapping (VSM), Process Mapping, 6S, change management and Kaizen., • Demonstrated success driving operational excellence, KPI oversight, productivity improvements, and workforce engagement initiatives., • Strong communication, leadership, problem-solving, and critical-thinking skills., • Ability to manage multiple priorities, execute with urgency, and consistently meet business objectives and deadlines. You should be proficient in: • Bachelor's Degree, • Data Analysis and Manipulation, • Labor Management Systems Knowledge, • Continuous Improvement, • FDA Regulations, • Kaizen, • Lean Manufacturing Principles, • Operational Metrics & KPI Management, • Good Manufacturing Practices (GMP), • Scheduling Experience, • High-level Operations Analysis, • Quality Control Data Analysis, • Experience in a Manufacturing Environment

Job DescriptionDescription: The health services that became the Anthony L Jordan Health Corporation (Jordan Health) began more than 100 years ago, in 1904. As one of the first 5 Federally Qualified Health Centers (FQHC) established in the nation, its roots are steeped in service to those who face barriers to health and health care, meeting their need for comprehensive medical, dentistry, behavioral health, and community services. Starting in northeast Rochester, NY, Jordan Health has since expanded to become a network of primary care offices and health centers serving residents living in three quadrants of Rochester, NY and in Canandaigua, N.Y. Jordan Health is now seeking a Scheduler who, under the guidance of the Front Office Supervisor, is primarily responsible for serving as the critical link between the patient and the care delivered by Jordan Health clinical and service staff as the first point of contact via telephone and/or in person. Effectively schedule patient appointments and all schedule-related transactions using a computerized system. If you want to apply your specialized experience and education in an environment where you can make a difference and significantly impact patients’ quality of life, please consider our Scheduler opportunity. Requirements: The Scheduler will ensure that: · An environment which promotes an exceptional patient and team experience. · Patient flow to clinicians and service staff based on appointment arrangements allows Jordan Health to serve optimal number of patients. · Revenue opportunities are captured and reimbursement risk is abated. · Jordan Health is in full compliance with all requirements related to provision of care, including billing and reimbursement. · The Scheduler is a strong Jordan team player. · The Scheduler contributes to improved clinical outcomes. Education And Experience Required: · High School diploma or equivalent is required. · One year of directly related experience in a health care setting (such as medical secretary, medical receptionist. Etc.) is strongly preferred. · Two years working in a position requiring customer interaction, demonstrating the ability to handle competing priorities. · Computer or business school training is highly desirable. · Bilingual preferred. Licenses And Certifications Required: · Certification to be completed within 12 month of start of employment. · Ongoing participation in continuing education is required. Special Skills, Knowledge Required: Must be able to demonstrate competency in: · MS Office Applications (Word, Excel, Outlook) · eClinicalWorks or other electronic health record preferred. Benefits: Jordan Health offers a competitive salary and full benefits offering including medical, dental, vision, life insurance, and 403b retirement plan. We offer Professional Development allowance. Jordan Health offers equal opportunities to all persons without regard to race, color religion, age, sex, disability, national origin, ancestry, citizenship, military or veteran status, marital status, sexual orientation, domestic violence victim status, predisposing genetic characteristics or genetic information, or any other status protected by law. About Jordan Health: Jordan Health is an independent FQHC, with Level III Patient-Centered Medical Home (PCMH) designation through the National Committee on Quality Assurance. Jordan Health receives funding from the Health Resources and Services Administration (HRSA) of the U.S. Department of Health and Human Services. Jordan Health is a network of outpatient primary care offices with providers who follow a panel of patients. While independent, Jordan Health actively collaborates with the major hospital and healthcare systems in our operating area to provide a total safety net of healthcare services.

Job DescriptionDescription: Summary: The IT Supervisor at Ibero-American Action League, Inc. (Ibero) plays a key role in overseeing the day-to-day operations of the Information Technology Department across all service and regional offices throughout New York State. This position is responsible for ensuring IT systems, equipment, and services operate efficiently while supervising the Helpdesk Specialist and supporting the agency's mission and operational goals. The IT Supervisor reports directly to the Sr. Director of IT & Security Administrator. Essential Functions: Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. IT Operations Management • Direct daily IT operations across all agency locations., • Prioritize workloads and delegate work assignments based on staff workload, technical ability, and operational priorities, • Monitor ticket queues and ensure service level expectations are met., • Manage escalations and communicate operational issues to the Sr. Director. Staff Management & Development • Supervise the IT Helpdesk Specialist., • Conduct one-on-one meetings, coaching, and mentoring at least once every two weeks., • Review workload distribution, ticket quality, and customer service to ensure consistent service delivery., • Complete employee performance evaluations and development plans., • Approve PTO requests while ensuring adequate operational coverage., • Identify training opportunities, provide technical guidance, promote cross-training, and foster professional growth., • Foster accountability, teamwork, knowledge sharing, and exceptional customer service. Infrastructure Monitoring & Operational Support • Oversee the daily operation of servers, networking, wireless, VPN, and core infrastructure., • Monitor system health, backup status, and operational alerts., • Identify operational risks and communicate infrastructure concerns to the Sr. Director. Endpoint & Service Delivery • Ensure endpoint deployment standards are followed., • Review onboarding and offboarding activities for completeness., • Validate asset inventory accuracy and lifecycle management., • Ensure compliance with agency endpoint standards. Operational Projects • Coordinate implementation of approved IT projects., • Track project milestones and communicate status., • Coordinate technical resources required for project execution. Vendor Coordination • Coordinate operational work with vendors and service providers., • Track vendor support requests through resolution., • Escalate contractual, budgetary, or strategic matters to the Sr. Director. Operational Standards & Documentation • Maintain standard operating procedures (SOPs), runbooks, and technical documentation., • Ensure documentation remains accurate, current, and consistent with departmental standards. Continuous Improvement • Identify opportunities to improve IT processes, service delivery, and operational efficiency., • Recommend and support approved standardization, automation, and process improvement initiatives. Reporting & Metrics • Provide regular operational status updates to the Sr. Director., • Report on ticket metrics, endpoint compliance, asset inventory, and project status., • Identify and report operational trends to the Sr. Director.Requirements: Position Qualifications: • Bachelor's degree in Information Technology, Computer Science, or a related field preferred; or an equivalent combination of education and relevant experience., • Minimum of five (5) years of progressively responsible IT experience preferred., • Minimum of two (2) years of experience supervising or leading technical staff preferred., • Experience supporting enterprise Microsoft technologies, including Microsoft 365, Microsoft Entra ID/Active Directory, endpoint management, networking, and related infrastructure technologies preferred., • Demonstrated ability to plan, organize, prioritize, and coordinate multiple operational initiatives while maintaining effective day-to-day IT operations. Competency Statements: • Leadership & Staff Development - Ability to supervise, coach, mentor, and develop technical staff while promoting accountability, teamwork, and professional growth., • Communication- Ability to communicate clearly and professionally with staff, leadership, vendors, and stakeholders, both verbally and in writing., • Planning & Organization – Ability to manage multiple priorities, coordinate operational initiatives, and ensure day-to-day IT operations remain effective., • Decision Making & Judgment – Ability to analyze problems, exercise sound judgment, establish priorities, work independently, and escalate issues appropriately., • Customer Service – Ability to provide exceptional customer service while balancing user needs with organizational priorities., • Technical Proficiency – Demonstrated knowledge of enterprise technologies, endpoint management, networking, and cybersecurity best practices., • Ethics & Professionalism – Demonstrates integrity, professionalism, confidentiality, and adherence to agency policies and standards., • Reliability & Accountability – Demonstrates dependability, initiative, accountability, and commitment to continuous improvement. Skills & Abilities: • Demonstrated ability to effectively supervise, coach, and develop technical staff., • Excellent written, verbal, organizational, and interpersonal communication skills., • Ability to manage competing priorities while maintaining high-quality day-to-day IT operations., • Ability to establish and maintain effective working relationships with employees, vendors, community partners, and stakeholders., • Ability to analyze operational issues, make sound decisions, and communicate progress proactively., • Bilingual (English/Spanish) preferred., • A combination of training and experience other than that specified, if determined to be appropriate, may be accepted by the President and CEO. Authority: The employee exercises considerable initiative in setting priorities within the framework of the agency’s policies and procedures. The individual must be resourceful and able to display initiative and understanding of management systems and interpersonal relations. Evidence of self-motivation and ability to work independently is a must. Physical Demands: The position does require occasional standing, squatting, lifting of up to approximately 30 lbs. and frequent sitting. By signing below, I hereby acknowledge receipt of my job description. I am aware that continued employment with Ibero-American Action League, Inc. is contingent on my adherence to the policies outlined in the employee handbook and my ability to function within the parameters of the job description. Furthermore, I acknowledge that any questions regarding this job description will be brought to the attention of my immediate supervisor. Employee Signature: _ Date: _ The Company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate.

Job Description We're looking for a Field Operations Supervisor to serve as the primary support resource for our field installation partners and technicians located at our headquarters in Rochester, NY. In this role, you'll help ensure fiber installations, service drops, and repair activities are completed safely, efficiently, and to the highest quality standards. You'll also play a key role in resolving field and customer escalations while supporting the ongoing development of our installation teams. If you're a hands-on leader who enjoys solving problems, coaching others, and driving operational excellence, we'd love to hear from you. What You'll Do • Lead and Support Field Operations, • Serve as the main point of contact and support resource for outside fiber technicians and contractors within your assigned territory., • Help coordinate and manage installation, service drop, and repair workflows to ensure timely completion of work., • Support field teams with technical guidance, troubleshooting assistance, and day-to-day operational needs., • Assist with assigning and tracking work through workflow management systems. Champion Safety and Quality • Promote a strong culture of safety and ensure compliance with OSHA, NESC, NEC, and company safety standards., • Provide safety training and reinforce safe work practices across all job sites., • Monitor installation quality and ensure work meets company standards and customer expectations., • Identify training opportunities and provide hands-on coaching to improve performance and quality. Deliver Outstanding Customer Service • Act as an escalation point for customer concerns, field issues, and contractor challenges., • Partner with internal teams and vendors to resolve problems quickly and professionally., • Lead by example in delivering a best-in-class customer experience., • Support Team Development and Performance, • Track and communicate productivity, quality, and performance metrics., • Assist in the development and delivery of training programs for both new and existing team members., • Foster accountability, continuous improvement, and high performance across the team., • Collaborate Across the Business, • Assist with materials and inventory management., • Participate in pre-construction site walkthroughs with business customers as needed., • Support engineering and operations teams with maintenance, repair, and network-related activities., • Help troubleshoot equipment failures and service-impacting issues. What We're Looking For • Minimum two years’ experience working in a field technician / fiber technician role preferred, • Minimum two years’ experience working with fiber both aerial and underground, • Ability to utilize workflow management systems, • Previous experience with scheduling and managing overtime, • Ability to lead by example and motivate a diverse work group to strive for excellence, • Strong customer service and presentation skills, ability to de-escalate customer service issues and work well with internal teams to provide quick resolution, • Desire to work outside and be “in the field” working hands on with team in all weather Additional Requirements • Valid driver's license with an acceptable driving record, • Ability to maintain insurability under company auto insurance guidelines, • Ability to successfully pass a pre-employment background check and drug screening Why Join us? • Opportunity to make a direct impact on the customer experience., • Collaborative and team-oriented environment., • Ability to develop field teams and influence operational excellence., • Growing industry with opportunities for professional growth and advancement. Compensation: Our job titles may span more than one career level. The salary for this position is between $65,000 - $73,400. The actual salary offered may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at www.greenlightnetworks.com/careers/. Ready to help connect communities through best in class fiber services? Apply today and join our team.

Job Description *$6,000 Signing Bonus* Job Title: Physical Therapist Location: Golisano Autism Center (Rochester, NY) split between Children’s program & Clinic Salary: $58,900 - $72,000 per year The listed base pay range is a good faith representation of current potential base pay for successful applicants. It may be modified in the future. Pay is determined by factors including experience, relevant qualifications, internal equity, and location. This position is eligible for a $6,000 signing bonus! This bonus is earned and payable as follows: 25% ($1,500) in the pay period following the 6-month anniversary of your employment; 25% ($1,500) in the pay period following the one-year anniversary of your employment; and 50% ($3,000) in the pay period following the two-year anniversary of your employment. Employment: Full Time, School Year Position (37.5 hours per week). Includes 6 week summer session. Monday through Friday during program hours. Evening work may be required as job duties demand. Summary/Objective: CP Rochester/Happiness House exists to support people with physical and developmental disabilities in choosing and accomplishing successive individualized life goals. We do this by providing a wide range of services to people of all ages in the Finger Lakes and surrounding greater Rochester area. Our purpose is to ensure that those we serve safely determine their own pathways in life and live as full members of their communities. Minimum Qualifications: • Bachelor’s degree in Applied Science. Completion of accredited Physical Therapy program., • License or eligible for license as a Physical Therapist in New York State., • Current New York State registration as a Physical Therapist., • Valid New York State driver’s license., • Experience working with individuals with developmental disabilities preferred., • Proficient computer skills with knowledge of Microsoft Office programs., • Must have demonstrated commitment to performing job duties and tasks at a high level of performance. Competency Requirements: • Client focus., • Strong collaboration skills., • Communication proficiency., • Ethical Conduct., • Must remain in compliance with mandatory trainings per agency policy and per all agencies and governmental entities that are billed and govern the various clinics., • Maintains CPR and First Aid Certification. Responsibilities include: • Imparts agency philosophy of “Equal Opportunity, Independence and Realization of Individual Potential” to children, families, program staff and community resources., • Maintains confidentiality of information relating to individuals and their families in accordance with agency policy., • Upholds NYS Education Law/Practice Act as relating to the practice of physical therapy., • Performs appropriate evaluations to individuals to determine the need for physical therapy services., • Ensures valid prescriptions are written for all individuals on caseload., • Carries out treatment plans developed after evaluation, in clinic setting for the Article 16 and Article 28 outpatient clinics as well as the Preschool or School Programs, as necessary., • Available to consult with other professionals such as teachers, habilitation staff, as well as other members of the interdisciplinary team as appropriate, to facilitate delivery of coordinated quality services to individuals., • Works with legal guardians, house staff or parents as integral members of the interdisciplinary team in the clinic, day hab or school setting, as needed., • Communicates with physicians, orthopedists and other medical personnel in order to facilitate evaluation and treatment of individuals., • Completes all paperwork in accordance with agency, program and department policies/guidelines., • Ensures knowledge of paperwork, Electronic Health Record and applicable Medicare and Medicaid regulations in order to provide appropriate documentation., • Attends all team, discipline and staff meetings as designated., • Maintains treatment area in an orderly manner to ensure safety., • Maintains all department equipment as appropriate., • Advises Supervisor of Clinical staff of need for replacement of old or ordering of new equipment., • Meets with interdisciplinary team and Program Supervisor as needed to review status and need of program modifications for individuals on caseload, • Participates in conferences, workshops and in-service training as needed or recommended to enhance job skills and personal growth and development., • Adheres to agency’s policies and procedures as well as department guidelines. Supervisory Responsibility: None. Potential to supervise Physical Therapy Students from local colleges and universities. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 50 pounds. Ability to pull and push wheelchairs up to *250 – 300 pounds – maximum weight required. Travel: Travel is primarily local during the business day but will be expected to work at any of our partner agencies. Some out-of-the-area and overnight travel may be expected. *Our comprehensive benefit plan includes but is not limited to (full-time & part-time positions only): • Affordable Medical (full-time only) / Dental / Vision Insurance, • Paid Personal Time Off, • Paid School Breaks as designated on the annual school calendar, • Paid Sick Time, • 10 Paid Holidays, • Matching 403B and/or ROTH Retirement Plan, • Additional Insurance Offerings - Term Life, Short Term Disability, Critical Illness with Cancer Rider, Accident Insurance, Identity Theft Protection, • Employer Paid Term Life/AD&D Insurance & Long Term Disability, • Employer Paid Health Reimbursement Arrangement (HRA), • 25% Tuition Discount for benefit-eligible Employees and Family Members at Roberts Wesleyan College EEO Statement: The agencies are equal opportunity employers. We do not discriminate against employees or applicants in the hiring, promotion, compensation, placement, termination, layoff, recall, transfer, leaves of absence or any other term or condition of employment on the basis of race, color, religion, sex, sexual orientation, gender orientation/identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran, domestic violence victim status, prior arrest and conviction records or any other protected category in accordance with applicable federal, state and local laws.

Job Description Job Title: Speech Language Pathologist - Itinerant Location: CP Rochester Salary: $35 per session Employment: Itinerant/12 Month position ? Flexible hours and schedule Summary/Objective: Speech-language pathologists (SLPs) work to prevent, assess, diagnose, and treat speech, language, social communication, cognitive-communication, and swallowing disorders in children and adults. Minimum Qualifications • Master?s Degree in Speech-Language Pathology., • New York State License in Speech Pathology., • Certificate of Clinical Competence in Speech Pathology awarded by the American Speech-Language-Hearing Association preferred., • Current knowledge of the principles and methods of prevention, assessment, and intervention for people with communication and swallowing disorders, including consideration of anatomical/physiological, psychological, developmental, and linguistic and cultural correlates., • Experience working with individuals with developmental disabilities preferred., • Must have demonstrated excellent listening skills., • Valid NYS Driver?s License., • Proficient computer skills and knowledge of Microsoft Office programs., • Must have demonstrated commitment to performing job duties and tasks at a high level of performance. Competency Requirements • Client focus., • Strong collaboration skills., • Communication proficiency., • Ethical Conduct. Responsibilities include: • Imparts agency philosophy of ?Equal Opportunity, Independence and Realization of Individual Potential? to children, families, program staff and community resources., • Maintains confidentiality of information relating to individuals and their families in accordance with agency policy., • Upholds NYS Education Law/Practice Act as relating to the practice of speech therapy., • Performs appropriate evaluations to individuals to determine the need for speech therapy services., • Ensures valid prescriptions are written for all individuals on caseload., • Carries out treatment plans developed after evaluation, in clinic setting for the Article 16 and Article 28 outpatient clinics as well as the Preschool or School Programs, as necessary., • Available to consult with other professionals such as teachers, habilitation staff, as well as other members of the interdisciplinary team as appropriate, to facilitate delivery of coordinated quality services to individuals., • Works with legal guardians, house staff or parents as integral members of the interdisciplinary team in the clinic, day hab or school setting, as needed., • Communicates with physicians, orthopedists and other medical personnel in order to facilitate evaluation and treatment of individuals., • Completes all paperwork in accordance with agency, program and department policies/guidelines., • Ensures knowledge of paperwork, Electronic Health Record and applicable Medicare and Medicaid regulations in order to provide appropriate documentation., • Attends all team, discipline and staff meetings as designated., • Maintains treatment area in an orderly manner to ensure safety., • Maintains all department equipment as appropriate., • Meets with interdisciplinary team and Program Supervisor as needed to review status and need of program modifications for individuals on caseload., • Participates in conferences, workshops and in-service training as needed or recommended to enhance job skills and personal growth and development., • Adheres to agency?s policies and procedures as well as department guidelines. Supervisory Responsibility: None. May supervise a SLP intern from an accredited institution periodically. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Work Environment: This job operates in a preschool and clinic environment. This role routinely uses standard office equipment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This may include grasping components of communication equipment, visual acuity which permits the assembly of assistive communication devices, speaking clearly, listening. The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 50 pounds. Ability to pull and push wheelchairs up to *250 ? 300 pounds ? maximum weight required. Travel: Travel is primarily local during the business day but employee will be expected to work at any of our partner agencies. Some out-of-the-area and overnight travel may be expected. EEO Statement: The agencies are equal opportunity employers. We do not discriminate against employees or applicants in the hiring, promotion, compensation, placement, termination, layoff, recall, transfer, leaves of absence or any other term or condition of employment on the basis of race, color, religion, sex, sexual orientation, gender orientation/identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran, domestic violence victim status, prior arrest and conviction records or any other protected category in accordance with applicable federal, state and local laws.

Job Description Job Title: Physical Therapist - Per Diem Location: CP Rochester and Happiness House Outpatient Clinics Hourly Rate: $37.12 - $45.00 commensurate with experience Hours of Employment: This is a per diem position. Days and hours of work are Monday through Friday variable each day during clinic business hours (8:00am-4:30pm) Summary/Objective: CP Rochester and Happiness House exist to support people with physical and developmental disabilities in choosing and accomplishing successive individualized life goals. We do this by providing a wide range of services to people of all ages in the Finger Lakes and surrounding greater Rochester area. Our purpose is to ensure that those we serve safely determine their own pathways in life and live as full members of their communities. Requirements: • Bachelor’s degree in Applied Science. Completion of accredited Physical Therapy program., • License or eligible for license as a Physical Therapist in New York State., • Current New York State registration as a Physical Therapist., • Valid New York State driver’s license., • Experience working with individuals with developmental disabilities preferred., • Proficient computer skills with knowledge of Microsoft Office programs., • Must have demonstrated commitment to performing job duties and tasks at a high level of performance. Essential Functions: • Imparts agency philosophy of “Equal Opportunity, Independence and Realization of Individual Potential” to children, families, program staff and community resources., • Maintains confidentiality of information relating to individuals and their families in accordance with agency policy., • Upholds NYS Education Law/Practice Act as relating to the practice of physical therapy., • Performs appropriate evaluations to individuals to determine the need for physical therapy services., • Ensures valid prescriptions are written for all individuals on caseload., • Carries out treatment plans developed after evaluation, in clinic setting for the Article 16 and Article 28 outpatient clinics as well as the Preschool or School Programs, as necessary., • Available to consult with other professionals such as teachers, habilitation staff, as well as other members of the interdisciplinary team as appropriate, to facilitate delivery of coordinated quality services to individuals., • Works with legal guardians, house staff or parents as integral members of the interdisciplinary team in the clinic, day hab or school setting, as needed., • Communicates with physicians, orthopedists and other medical personnel in order to facilitate evaluation and treatment of individuals., • Completes all paperwork in accordance with agency, program and department policies/guidelines., • Ensures knowledge of paperwork, Electronic Health Record and applicable Medicare and Medicaid regulations in order to provide appropriate documentation., • Attends all team, discipline and staff meetings as designated., • Maintains treatment area in an orderly manner to ensure safety., • Maintains all department equipment as appropriate., • Advises Supervisor of Clinical staff of need for replacement of old or ordering of new equipment., • Meets with interdisciplinary team and Program Supervisor as needed to review status and need of program modifications for individuals on caseload, • Participates in conferences, workshops and in-service training as needed or recommended to enhance job skills and personal growth and development., • Adheres to agency’s policies and procedures as well as department guidelines. Competency Requirements: • Client focus., • Strong collaboration skills., • Communication proficiency., • Ethical Conduct., • Must remain in compliance with mandatory trainings per agency policy and per all agencies and governmental entities that are billed and govern the various clinics., • Maintains CPR and First Aid Certification Supervisory Responsibility: None. Potential to supervise Physical Therapy Students from local colleges and universities. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 50 pounds. Ability to pull and push wheelchairs up to *250 – 300 pounds – maximum weight required. Travel: is primarily local during the business day but employee will be expected to work at any of our partner agencies. Some out-of-the-area and overnight travel may be expected. Apply: https://recruiting.myapps.paychex.com/appone/MainInfoReq.asp?R_ID=7050238 The listed base pay range is a good faith representation of current potential base pay for successful applicants. It may be modified in the future. Pay is determined by factors including experience, relevant qualifications, internal equity, and location. EEO Statement: The agencies are equal opportunity employers. We do not discriminate against employees or applicants in the hiring, promotion, compensation, placement, termination, layoff, recall, transfer, leaves of absence or any other term or condition of employment on the basis of race, color, religion, sex, sexual orientation, gender orientation/identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran, domestic violence victim status, prior arrest and conviction records or any other protected category in accordance with applicable federal, state and local laws.