Revit jobs in New Rochelle, New YorkCreate job alerts

Staff Mechanical Design Engineer, EPC Locations: Reno NV Carson City NV San Francisco CA Medical, Dental, 401(k) Pay Range: $160-$200K The Mechanical Engineers is part of the Infrastructure Development team and is the Mechanical Engineer of Record on projects (Hazardous occupancy, clean and dry spaces, chemical process / industrial plants), responsible for mechanical and plumbing deliverables (specifications, calculations, permit / construction documents, construction administration) Responsibilities: • Design ownership for a wide range of mechanical and plumbing systems including: industrial/non-potable water, HVAC systems (labs, offices, industrial plants), process heating / cooling systems, humidifiers, dehumidifiers, abatement systems (dust collectors, scrubbers), cooling towers, fans/pumps, plumbing, etc., • Review conceptual designs from developing Engineers and identify technical and financial risks., • Responsible for designing/reviewing mechanical engineering deliverables with respect to code compliance and ensuring design maintains the highest level of quality., • Develop and improve project workflows and standards to ensure each design is consistently excellent., • Participate in on-field construction and commissioning activities by serving as the point of contact for technical questions and real-time issue resolution., • Multi-discipline collaboration on the development of equipment general arrangements, P&IDs, isometrics, tie-in lists and material takeoffs., • Travel to project site and meetings as needed.Desired Qualifications:, • 8+ years of work experience in HVAC and Plumbing/FP design., • Bachelor’s Degree in Mechanical Engineering or similar discipline., • Licensed Professional Engineer with NCEES record with ability to apply for NV and SC, • Expert familiarity with ICC including International Energy Conservation, Mechanical, Plumbing and Fire Protection Codes, NFPA standards, SMACNA duct construction standards, ACGIH Ventilation Practices and ASHRAE, • Expert in designing condenser fluid heat rejection systems, chillers, boilers, air handling units, air and water source heat pumps, dust collectors, humidifiers, dehumidifiers, fans, and pumps., • Experience with the following is preferred: Abatement systems (thermal oxidizers, dry and wet scrubbers), Heat Exchangers (shell/tube, plate/frame, brazed fin), Control Valves and Instrumentation, and Heat Recovery Systems., • Working knowledge of writing sequences of operation for HVAC and chilled water systems., • Ability to specify ductwork material and size for various ducted exhaust systems and pressure classes., • Ability to specify pipe material and size for various thermal hydronic systems., • Ability to create or edit construction specifications covering mechanical, process piping and plumbing systems., • Proficient in the use of AutoCAD required. Revit experience is highly preferred., • Experience sourcing and specifying mechanical equipment and executing RFP process., • Strong experience with engineering software packages: Pipe-Flo, AFT Arrow or other hydraulic modeling application, Caesar II, AspenTech applications and/or Applied Flow Technology applications, Carrier HAP, Trane Trace, Navisworks, Bluebeam.We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity, or any other legally protected status. All qualified applicants will receive consideration for employment without regard to any of these characteristics.PandoLogic. Keywords: Mechanical Design Engineer, Location: Yonkers, NY - 10705

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our White Plains, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Requirements • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionMulti-discipline engineering firm in business for decades is looking for an Electrical Discipline Engineer for their White Plains office! Job Responsibilities: • Design electrical systems such as lighting, power distribution, stand-by power generation, communication, fire alarm and security systems, • Manage a group of Electrical Engineers in project design and development tasks such as drawings, calculations, cost estimates, and specifications, • Respond to client questions and comments, • Review contractor submittals and provide clarifications during construction, • Review electrical department design documents for completion, • Ensure department personnel adhere to accepted industry and company standards, • Assist in the development of company quality standards and procedures, • Work closely with management and electrical department leadership to develop and implement electrical short- and long-range manpower and production plans to meet project objectives, • Assist in business development initiatives to pursue new projects including participation in client presentations Requirements: • BS in Electrical Engineering from an accredited program, • 10+ years’ experience with a consulting engineering firm designing building power, communication systems, lighting, and security systems, • Extensive knowledge of the architectural and engineering industry, including the Federal, State, and local laws and regulations that pertain to the industry, • P.E. license, • LEED Accreditation, • Knowledge of AutoCAD, EasyPower, and Revit desired, • Supervisory experience, • Experience with HVAC and plumbing systems a plus Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description Job Title: Senior Structural Engineer Office Location: White Plains & NYC - Hybrid work schedule Salary: $100000-$140000 / Year + bonus Benefits: Medical, Dental, 401k, Commuting Cost Senior Structural Engineer This role supports multiple concurrent projects and serves as a technical lead, completing complex structural engineering work while mentoring junior engineers and coordinating closely with project managers and clients. Key Responsibilities • Lead structural analysis and design for complete building systems (gravity and lateral) using advanced software and hand calculations, • Review and validate design criteria, calculations, and construction documents, • Assign, train, and oversee junior engineers and production staff; set task schedules and expectations, • Maintain advanced knowledge of building codes and regulatory requirements, • Interface directly with clients, design teams, contractors, and building officials, • Perform site surveys, structural assessments, and construction-phase observations with written reporting, • Review shop drawings, submittals, RFIs, specifications, and regulatory forms, • Prepare technical reports, proposals (scope/schedule/budget), and contribute to documentation production (AutoCAD/Revit), • Support problem-solving, quality control, and occasional marketing/visibility efforts Qualifications: • Licensed Professional Engineer required, • B.S. in Civil Engineering or structural engineer, • 4+ years of experience in structural analysis and design, • M.S. Preferred Addison Group is an Equal Opportunity Employer. Addison Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Addison Group complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. Reasonable accommodation is available for qualified individuals with disabilities, upon request.

Job Description We currently are looking for qualified candidates in our White Plains, NY office locations to work on Energy and Commissioning projects for our Building Engineering Division. LaBella’s Building Engineering Departments provides our employees a collaborative, professional working environment, allowing for personal growth and responsibility on a variety of significant projects that serve our target markets. The Energy & Commissioning engineer will work with other engineers and project managers as part of a project team to support the development of concepts, strategies, designs, drawings, specifications and reports for new Building and Renovation projects with an Energy and/or Commissioning focus. Responsibilities • Perform energy audits and feasibility studies to identify Energy Conservation Measures., • Complete utility data analysis and evaluation of energy usage., • Perform basic energy savings calculations, making educated assumptions when applicable and using / interpreting data gathered from the field to estimate savings., • Develop design concepts in technical documentation. May assist with mechanical design projects as required., • Able to interpret complex plans and specifications and apply available information to ensure that all project design requirements are satisfied., • Plan, perform and document the commissioning of various Mechanical and Electrical Systems to ensure the intended operation., • Conduct on-site investigation and inspection of multi-discipline projects., • Takes a lead role in resolving construction problems, procedures, and methods., • Maintain familiarity with appropriate engineering and construction codes. Requirements • Minimum 5 years of relevant job experience., • Bachelor of Science in Mechanical Engineering (or equivalent), • Obtained or in pursuit of a NYS PE License., • Energy and/or Commissioning certifications from industry organizations is a plus (CEM, CBCP, BCxP, BEAP, etc.), • Functional working knowledge of M/E/P/FP, building automation systems as well as system design and construction processes., • Proficient with building modeling software programs., • Experience in AutoCAD and/or Revit is preferred. Salary Range: $75,000 - $90,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • Update and maintain shop drawing and RFI log Qualifications: • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Proficient in design and calculation software MS Office: Excel, Word, Project, PowerPoint, Teams SKM Powertools, EDSA or ETAP experience is desirable • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.)Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xecygz66zc6wx6iraifwhhi5ha@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Mechanical Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing commercial HVAC mechanical systems specifically for cooling mission critical data center computer rooms. They will have experience with heating and cooling load calculations, ductwork and piping sizing, selecting HVAC equipment, energy modeling and other engineering calculations. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for complex facility design projects, • Create Conceptual Designs gathered from meeting with the client, • Oversee Commissioning Process as needed, • Work with Business Development Team to respond to RFPs as needed, • Represent the company in project meetings Qualifications: • 5-10 years experience designing data center cooling systems, • PE or EIT a plus, • LEED a plus, • Bachelor's Degree in Mechanical Engineering or Equivalent, • Experience with Mechanical Systems ( HVAC , CFD ( Fluid Dynamics ), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ), • Equipment sizing and calculations, • Experience reviewing work in REVIT; Trane Trace or IES VE Energy Modeling software a plus, • Familiar with the design process of building systems for mission critical projects or healthcare / hospital required, • Effective Communicator – emails, phone and face to face., • Ability to work independently, • Proficiency in MS Office products, including Word, Excel, Outlook and MS ProjectSubmittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 65xah9kqjg11fz6h3kx66yewhc@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Please note; this role is based in Sleepy Hollow! Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Pursue professional development opportunities, including licensure (e.g., PE, LEED AP). Qualifications: • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills., • EIT certification preferred; PE license is advantageous but not mandatory at this level. All candidates must be legally permitted to work in the United States of America, pass a background check, a drug screening and reliably commute to both the Sleepy Hollow, NY office and on occasion to a job site. The Candidate must have their own auto insurance in their own name and meet corporate minimums for coverage. Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionA multi-discipline engineering firm with over 70 years in business is looking for a Senior Electrical Engineer for their White Plains, New York office! Responsibilities: • Design electrical systems (power distribution, stand-by power generation, lighting, communication, fire alarm, security systems), • Manage team of electrical engineers in a variety of project design and development tasks:, • drawings, • calculations, • cost estimates, • specifications, • client communication, • contractor submittal reviews, • Review design documents, • Assist with business development initiatives, • Mentor/train junior staff Requirements: • B.S. degree in Electrical Engineering from an accredited program, • 5+ years of consulting experience (designing building power, lighting, communication and security systems), • Experience with HVAC and plumbing systems preferred, • PE License, • Extensive knowledge of the architectural/engineering industry (Federal, State, and local laws/regulations), • Experience using Outlook and Microsoft Office (or similar software), • LEED Accreditation, • Working knowledge of AutoCAD and Revit preferred Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Engage in the development of a design through sketches, electronic models, diagrams, and other visual formats Qualifications: • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients, • International Codes and NFPA Requirements Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 961q89cd1468s7rbapxg96zyae@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Seeking an Electrical Engineer with a focus in lighting. This individual should have experience in lighting audits, lighting design, and lighting commissioning. Applicant should have knowledge of lighting systems and their components, as well as LL88 and NYC Energy Code, and lighting energy calculations. 3+ years of experience and EIT certification preferred. Experience with Excel and CAD/REVIT required. Duties • Lighting Audits, • Lighting Design, • Electrical Design, • Electrical Construction Oversight Salary Range: $80,000-$120,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Electrical Engineering degree or equivalent experience, • Autocad/Revit, • Knowledge of NYC Electrical Code, LL87, LL88 Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description A multi-discipline consulting firm is seeking a Project Wastewater Engineer for their growing team in White Plains! Responsibilities: • Perform various engineering tasks including wastewater collection, conveyance, and treatment processes, • Lead engineering evaluations, • Prepare design calculations, reports, plans and specifications, • Perform construction administrative tasks (construction phase management activities, coordinate shop drawing reviews, RFI responses, develop construction change orders), • Communicate directly with clients, • Confirm accuracy of plans/specifications, • Perform field activities (site investigations, witness testing and milestone construction observation), • Supervise/manage junior staff, • Assist with business development (write technical proposals/assist with budgeting), • Lead pursuit of small to moderate size projects Requirements: • BS in Engineering (Civil, Environmental, Chemical or Mechanical), • 5+ experience in design of wastewater treatment plants, collection and conveyance systems, and alternative onsite treatment systems, • PE License or ability to obtain in six months, • Microsoft Office Suite experience (Word, Excel, Access, Teams, Outlook), • Knowledge of Autodesk Revit and Civil 3D software Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

WDF Inc in Mount Vernon is seeking a Senior Revit API Developer to create and automate custom tools using the Autodesk Revit API.

Responsibilities include drafting using AutoCAD, Civil 3D, and Revit, conducting site visits, and supporting senior engineers.

Chris Coneys Liberty Personnel Services 610-684-8671 Key words:Electrical Engineer, lighting systems, designer, power distribution, AutoCAD, Revit, BSEE, electrical engineering, construction, architecture, NEC, UPS, IT, Computer Science, Mechanical Engineering, Ark Flash, electrical distribution #J

The ideal candidate will have over 7 years of experience in HVAC VDC and strong knowledge of industry tools like Revit and Navisworks.

Highly Regarded Family Owned GC is Looking to a Hire a Full-Time Senior Project Manager for New Projects in the Bronx! This Jobot Job is hosted by: Joshua Tacke Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $150,000 - $225,000 per year A bit ab

Highly Regarded GC is Looking to a Hire a Full-Time Project Manager for Projects in Westchester + NYC! Great Company and Bonus Potential! This Jobot Job is hosted by: Joshua Tacke Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $130,000 - $155,00

Labellapc is seeking a Civil Designer to join our team in White Plains, NY.This role involves designing plans for municipal engineering projects, collaborating with senior engineers, and conducting site visits.The ideal candidate will hold a Bachelor's degree in civil engineering and have 0-2 years

Highly Regarded Family Owned GC is Looking to a Hire a Full-Time Project Manager for Projects in Manhattan and the Bronx! Great Company and Bonus Potential! This Jobot Job is hosted by: Joshua Tacke Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary:

Office Assistant Project Manager.The expected salary range for this position is $125,000 - $155,000 depending upon experience.Tutor Perini Company, is seeking an Office Assistant Project Manager to join our office in Mount Vernon, NY.Extraordinary Projects, Exceptional Performance.WDF Incorporated i

Administrative Project Manager / HYBRID.The Administrative Project Manager provides advanced administrative support to members of our Executive Team.This role is critical in optimizing the Team's effectiveness, and serving as a trusted partner in managing communications, complex schedules, strategic

An established industry player is seeking a skilled Project Manager to lead complex IT projects, including those involving AI solutions.This role focuses on managing project phases, coordinating with teams and stakeholders, and ensuring timely deliverables within budget.The ideal candidate will have

Epic is looking for a Project Manager to join its team in Madison, WI.In this role, you will manage projects that drive improvements in patient care across healthcare organizations, including presenting to leadership and training end-users on software.The job requires a Bachelor's degree and a willi

A Day in the Life Assist with site and space planning for construction project managers Research building codes, local zoning, and business park covenants Prepare presentation materials including drawings, diagrams, and renderings to clearly convey design concepts Review project scope with const

A design firm in White Plains, NY is seeking a motivated Architectural Designer to join their team.The position involves drafting, modeling, and project documentation under senior mentorship.Ideal candidates will have a Bachelor’s degree in Architecture and proficiency in AutoCAD, along with solid

Our client - a major utility firm based out of Westchester County, NY - has an immediate need for Project Manager.The particulars of the position are as follows.Project Overview The Project Manager will be heavily involved in the planning, execution, and oversight of diverse technology projects.This

A DAY IN THE LIFE Assist with site and space planning for construction project managers Research building codes, local zoning, and business park covenants Prepare presentation materials including drawings, diagrams, and renderings to clearly convey design concepts Review project scope with const

Ampcus, Inc is looking for a Project Manager based in White Plains, NY to oversee diverse technology projects.The ideal candidate has a Bachelor's degree in IT or related field, and a PMP certification is desired.Responsibilities include managing project plans, coordinating teams, and ensuring timel

Studio Architecture, DPC located in White Plains, NY is looking for a motivated Architectural Designer to join their design team.This role is full-time and requires 3-5 years of experience.You will gain hands-on experience in drafting, modeling, and project documentation while working on various sta

A staffing solutions company is seeking a skilled Project Manager to lead and oversee diverse technology projects in White Plains, NY.This 12-month contract role requires a results-driven professional with expertise in project management methodologies and a strong track record in delivering projects

VanderHorn Architects, based in Greenwich, CT, seeks an experienced Project Manager responsible for the day-to-day management of large single-family residential projects from design through construction.Key qualifications include a minimum of three years of managing similar projects, proficiency in

Candidates should have a Bachelor's or Master's degree in Architecture, along with proficiency in Revit, AutoCAD, and 3D modeling software.

Job title: CAD Technologist Specialist Location: Scarborough, ON (ONSITE) Length of Contract: 06 months Overview The CAD Technologist Specialist will support the Engineering Drafting team with the modernization, updating, and standardization of legacy technical documentation.This role focuses on con

Asepha builds advanced AI tools that re-imagine how medications are prescribed, verified, and supported across the pharmacy ecosystem.Backed by $4M in funding and trusted by multiple Fortune 50 healthcare organizations, we're scaling rapidly and looking for a UX Designer who has shaped the experienc

Ampcus Inc is looking for a CAD Operator based in White Plains, NY, who will utilize CAD software to prepare detailed drawings for various engineering disciplines.The ideal candidate will have a high school diploma or technical certification and at least 2 years of experience in drafting.Responsibil

Working at WAC Group : Ask about our beautiful newly renovated facilities and free on site EV Charging for our team members!! Job Title: Administrative Project Manager Reports To: Global President Job Location: Port Washington, New York 11050 The Administrative Project Manager provides advanced

This position is related to distributed generation energy projects in the utility sector.Experience with projects in this area is required.Project managers are responsible for guiding projects from start to finish.For the client we support these projects could be T&D, hydro-electric, substation, and

Outline client design objectives.Conceptualize and sketch design plans.Determine cost of completion and project requirements in the budgeting phase.Set a timeline for the completion of an interior design project.Source materials and products included in plans.Create 'mood boards' to sample your desi

We encourage applications from candidates with diverse backgrounds and experiences.If you're passionate about our mission and have relevant skills, we want to hear from you.Ariva seeks a Program Manager to lead our microentrepreneur support initiative in the Bronx.You'll oversee business development

Our client, a Fortune 500 Pharmaceutical Company, has engaged GForce Life Sciences to provide a Senior Project Manager (SPM) to provide senior-level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, con

Interior Designer Job Duties: Develops design concepts and produces contract documents based on client needs.Meets with clients to program the project requirements.Takes accurate as-built measurem

Our client is seeking a highly experienced Senior Project Manager to lead large-scale capital projects domestically and internationally, including a major Hyderabad office development (~160,000 SF supporting ~800 headcount).This role operates as a sole practitioner (owner’s representative) respons

A well-established mechanical contractor based in Suffolk County is seeking a Project Manager / Senior Project Manager to join their team, delivering HVAC and mechanical projects across Long Island and the Queens / Brooklyn / Manhattan corridor.This is an active requirement with a long-standing cont

The client is a Custom Homes Builder located in New Canaan, CT.They have been established for over 10 years and have built a spectacular reputation for being the go-to contractors for custom home building.The client specializes in ground up construction of ultra high-end custom homes in New York and