Trabajos revit en Salt Lake City, UtahCrear alertas

Job Description POSITION SUMMARY The Field Surveyor partners with the BIM / VDC, Field Operations, and Prefab teams to translate coordinated BIM models into the field through accurate point layout, as-built capture, and field verification. This role operates robotic total stations and related layout equipment to physically place points on the jobsite that correspond to model elements—penetrations, hangers, walls, sleeves, embeds, equipment, and more—ensuring construction is installed in alignment with the design intent and the VDC-coordinated model. Field layout methods are continually evolving based on the conditions and scenarios encountered in the field, and the Field Surveyor is expected to apply the right combination of digital and traditional techniques to deliver accurate, reliable layout in any situation. The Field Surveyor is a critical link between the office model and the work that gets built in the field. SUPERVISORY RESPONSIBILITIES • Provides day-to-day direction and guidance to apprentices, helpers, or junior field layout personnel assigned to assist with layout work on a given project., • Coordinates with the BIM / VDC team and field leadership to align layout priorities with project schedules and prefab packages. ESSENTIAL DUTIES & RESPONSIBILITIES • Perform daily field layout activities by operating a robotic total station (Trimble, Leica, Topcon, or similar) to shoot points from the coordinated BIM / VDC model onto the jobsite., • Set, verify, and maintain control points and benchmarks on each project, ensuring jobsite control is tied to the project coordinate system., • Translate coordinates and points from BIM / VDC models (Revit, AutoCAD, Navisworks) into field layout software (Trimble Field Link, Autodesk Point Layout, or equivalent)., • Coordinate with the BIM / VDC department, BIM Coordinators, and Detailers to receive layout files, confirm point sets are current, and report any field-found conflicts back into the model., • Capture as-built data and field verification points—penetrations, sleeves, hangers, embeds, slab edges, and similar elements—and deliver the data back to the BIM / VDC team for model updates., • Perform existing-condition surveys and scans as needed to support coordination, prefabrication, and constructability efforts., • Maintain, calibrate, and care for all field layout equipment, including robotic total stations, prisms, tripods, data collectors, batteries, and accessories., • Maintain accurate daily logs of layout activities, points placed, control verification, and any field-discovered conflicts or RFIs., • Coordinate daily with Project Managers, Project Engineers, Superintendents, Foremen, and trade partners to plan layout sequencing and prioritize work., • Identify and communicate constructability issues, model errors, or field conflicts back to the BIM / VDC team in a timely manner., • Follow all jobsite safety requirements, including PPE, site-specific orientations, and OSHA standards., • Adapt field layout methods to evolving site conditions and project scenarios, applying the appropriate combination of digital and traditional techniques to deliver accurate layout., • Perform traditional and manual layout tasks as conditions require, including cutting 2x4s, installing concrete stakes, fastening boards to stakes, and tying and pulling strings to establish layout lines and references., • Verify layout accuracy using a tape measure and other manual verification methods as a routine best practice on every layout., • Perform other related duties as assigned to support the success of the company. REQUIRED QUALIFICATIONS Knowledge, Skills & Abilities • Working knowledge of robotic total stations and field layout workflows (Trimble RTS, Leica iCON, Topcon LN, or equivalent)., • Ability to read and interpret construction drawings, shop drawings, and coordinated BIM models., • Working understanding of project coordinate systems, control points, and field-to-model alignment., • Proficiency with field layout software such as Trimble Field Link or Autodesk Point Layout., • Familiarity with Revit, AutoCAD, and Navisworks at a level sufficient to extract and verify points., • Strong attention to detail and a high level of accuracy., • Excellent verbal and written communication skills, with the ability to coordinate effectively between office-based VDC staff and field crews., • Strong organizational skills and the ability to manage multiple projects and shifting priorities., • Ability to work independently in the field while keeping the BIM / VDC team informed., • Proficiency with Microsoft Office Suite and the ability to quickly learn additional construction technology tools. Education & Experience • Technical certificate or degree in surveying, construction management, BIM / VDC, or a related field—or equivalent combination of education and professional experience., • Minimum of three (3) years of experience performing field layout on commercial construction projects., • Prior experience working directly with a BIM / VDC department strongly preferred. PREFERRED QUALIFICATIONS • Autodesk Certified Professional credentials in Revit or Navisworks., • Manufacturer training or certifications on Trimble, Leica, or Topcon robotic total station platforms., • Experience supporting layout on data center, healthcare, mission-critical, or large industrial projects., • Experience with reality capture / 3D laser scanning to support as-built modeling. WORK ENVIRONMENT & PHYSICAL DEMANDS Work is performed in a combination of office and active jobsite environments. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Typical physical demands include: • Prolonged periods of standing, walking, kneeling, climbing, and navigating active jobsites in all weather conditions., • Frequent walking on active construction sites, including uneven terrain, stairs, ladders, and scaffolding., • Ability to lift and carry equipment cases, tripods, and total stations up to 50 pounds., • Comfortable working at heights and in confined spaces as required by the project., • Ability to wear required personal protective equipment (PPE), including hard hat, safety glasses, hearing protection, gloves, and high-visibility apparel., • Ability to discern color-coded wiring and read construction drawings and 3D models., • Exposure to outdoor weather conditions, dust, noise, and other typical jobsite hazards., • Must possess a valid driver's license and reliable transportation to and from jobsites. TRAVEL Regular local travel between Skyline Electric facilities and active project sites within Utah and surrounding states. Occasional overnight travel may be required for project mobilizations, specialized layout assignments, or training. Company DescriptionEstablished in 1959, Skyline Electric Company brings over 65 years of knowledge and experience to every project. Specializing in Electrical Design, Installation, Maintenance, 24-Hour Electrical Service, and Motor Repair/Sales, we give our clients quality solutions for all their electrical needs. We are the preferred electrical Contractor in the Intermountain Region because we strive to add dramatic value to the lives of our employees, our customers, and the community.Established in 1959, Skyline Electric Company brings over 65 years of knowledge and experience to every project. Specializing in Electrical Design, Installation, Maintenance, 24-Hour Electrical Service, and Motor Repair/Sales, we give our clients quality solutions for all their electrical needs. We are the preferred electrical Contractor in the Intermountain Region because we strive to add dramatic value to the lives of our employees, our customers, and the community.

Senior Mechanical Engineer PE - Technical Manager - Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $120,000 - $200,000 per year A bit about us: We are a Leading Full-Service Engineering Consulting Firm with over 60 years of experience in Mechanical, Electrical, Plumbing, IT, and Commissioning Services for various applications. Our expertise, combined with business partnerships and the latest MEP technology, has earned us industry admiration, partner respect, and client loyalty. We prioritize our employees' well-being, fostering work/life balance and a positive culture, which we believe gives us a competitive edge and ensures excellent client experiences. Why join us? Do you want to work with top clients and be part of a award winning firm!? We do too! Competitive Base Salary! Competitive Bonus Package! Extremely Competitive Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Generous PTO! 401k Plan! Job Details Lead Mechanical Engineer PE – Salt Lake City, UT (Hybrid) We are seeking a Sr. Mechanical Engineer to Lead our Salt Lake City location. Successful candidates will have their PE License in Utah (or ability to gain reciprocity) with 6-15 years of experience in the HVAC and Plumbing Design field on Commercial, Institutional, Healthcare, and/or Mission Critical Facilities. This is a leadership role with a fast track for advancement and opportunity to be promoted to Principal within 2 years. KEY REQUIREMENTS Seeking a Senior Engineer who can stand alone and work independently while we continue to staff the office. Must be able to run projects from design through completion, lead client meetings, oversee junior staff, and ensure successful delivery of projects. The ideal candidate will have a strong background in Design with Project Management experience and ability to assist with Business Development efforts. Must possess excellent knowledge of Building Mechanical Systems and Mechanical National Codes, Standards, and Regulations * Revit Software Proficiency Qualifications: Bachelor’s Degree in Mechanical Engineering from ABET Accredited College or University 6-15 years of experience with an MEP or Engineering Consulting firm designing HVAC building systems on complex projects Professional Engineering License, P.E. Required (EOR) Proficient computer skills in Revit, AutoCAD, Microsoft Office (Outlook, Teams, Word, Excel, etc.). High level of written and verbal communication skills. High attention to detail. Proven Project experience in Commercial, Public Sector, Educational (K-12 / Higher Education), Justice, and/or Civic Projects Develop HVAC designs from concept through completion of construction. Coordinate HVAC design requirements with architecture, structure, and other disciplines. Prepare engineering design calculations and mechanical system layouts, and detailed engineering reports and narratives. Experience with direct client contact and fostering those relationships. Assist in developing project objectives, goals, and documentation policies. Support business development initiatives by assisting the RFP process and interview process. Actively engage in community and/or industry-specific organizations that will build the brand. Duties: Performs involved and detailed design including system approach, equipment selection, mechanical room layout, and interface/coordination with clients. Receives project assignments and design requirements from the firm's Principals and Associates. Interfaces directly with clients and end users to understand and document expectations. Leads the project during design and construction. Completes project designs, drawings in 3D Revit and/or 2D CAD, site observations, specifications, calculations, equipment selection and application, and construction administration as necessary. Benefit: Major medical with vision and dental plan 100% paid for the employee and partial for dependents. 401K Plan, Flex Spending Plan, Health/Fitness Plan. Short and Long Term Disability, Life Insurance plan 100% paid for the employee. Flex time, 9 hour days Monday through Thursday and half days on Friday. Paid holidays, monthly company activities, and employee longevity rewards program. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Growing Engineering Firm | Full Benefits Package | Upwards Career Growth! This Jobot Job is hosted by: Lauren Lehman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $60,000 - $70,000 per year A bit about us: We are working with a growing engineering firm who is searching for a Plumbing Engineering Designer. Apply today to learn more! Why join us? • Upwards Growth!, • Excellent Benefits!, • Great Compensation Package!, • Must be fine with 10 - 20% travel Job Details Position Overview: We are seeking a Mechanical Designer to join our team and contribute to a variety of multi-discipline engineering projects. This role provides the opportunity to work under the direct supervision of a licensed Professional Engineer (P.E.), offering valuable experience toward professional registration. The ideal candidate will have a strong background in plumbing system design and a passion for delivering high-quality engineering solutions. Key Responsibilities: Design service water piping, sewage disposal systems, specialty piping, and fire safety systems. Ensure all designs comply with applicable local, state, and national building codes. Conduct predesign site visits to survey existing conditions and document findings. Prepare preliminary design drawings and obtain necessary project approvals. Develop contract documents including calculations, design drawings, schematics, and details for construction. Review contractor submittals to verify conformance with design documents. Perform site observations to ensure compliance with contract documents and building codes (responsibility increases with experience). Qualifications: B.S. degree in Mechanical Engineering. 2–4 years of plumbing design experience (municipal and institutional projects preferred). Proficiency with Autodesk Revit required. Engineer-in-Training (EIT) certification preferred. Strong verbal and written communication skills. Detail-oriented with the ability to manage multiple tasks effectively. Why Join Us: Opportunity to work in a collaborative, multi-discipline environment. Direct mentorship and supervision from a licensed Professional Engineer. Career growth through exposure to diverse projects and increasing responsibilities. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

COMPANY Our CLIENT is an award-winning full-service architecture and interiors firm based in Basalt, Colorado. They specialize in timeless, sustainable, and contextually responsive design for luxury residential, hospitality, and community-based projects throughout the mountain west and beyond. Their work is rooted in the belief that architecture must blend seamlessly with its natural and built environment, honoring local materials, vernacular, and the unique character of each setting. POSITION SUMMARY We are seeking a Senior Project Manager/Architect to lead multiple high-end projects from concept through completion. This role requires a seasoned professional who can manage all technical, business, design, and administrative aspects of projects while mentoring junior team members in a collaborative studio environment. KEY RESPONSIBILITIES • Oversee all phases of multiple projects simultaneously from pre-design through construction observation, • Lead technical, business, design, and administrative components of complex residential and hospitality projects, • Supervise project teams and delegate tasks effectively to meet deadlines and quality standards, • Provide mentorship and technical guidance to junior staff members, • Manage client relationships with excellent listening and communication skills, • Produce expert-level work in Revit for all project documentation and coordination, • Create photorealistic 3D renderings and presentations using Twinmotion, Lumion, or similar platforms, • Set up and export models for consultant coordination and client presentations, • Coordinate with consultants, contractors, and agency officials throughout project lifecycle, • Ensure projects meet firm standards for design excellence and sustainability, • Maintain organized project documentation and filing systems, • Participate in design development and problem-solving discussions, • Conduct site visits and construction observation as needed REQUIRED SKILLS & EXPERIENCE • Degree in Architecture from an accredited university, • 10+ years of professional experience in architectural project management, • Proven track record managing multiple high-end single-family residential or hospitality projects from concept through completion, • Proficiency in Revit, • Advanced 3D rendering skills (Twinmotion, Lumion, Enscape, or similar platforms), • Deep technical knowledge of building systems, detailing, and construction methods, • Experience supervising and mentoring junior design staff

We are seeking a Deliverables Coordinator who is responsible for leading and supporting the production of high-quality electronic engineering and design deliverables for complex semiconductor projects. The role coordinates production activities, manages schedules, monitors performance metrics, supports CAD standards and drawing package development, and provides QA/QC oversight to ensure deliverables meet client, quality, governance, and assurance requirements. Success in this role requires strong AutoCAD and Revit experience, excellent communication and organizational skills, attention to detail, the ability to manage concurrent priorities under pressure, and a collaborative, problem-solving mindset within multidisciplinary project environments. Ideal candidate will be located in Tempe, Arizona, Portland, Oregon or Pittsburg, Pennsylvania but there is geographic flexibility for well-qualified candidates located near a Jacobs US office. Key Responsibilities Coordinating, leading, or performing production of electronic deliverables. Coordinating production work that meets quality and client requirements. Monitoring and holding self and team(s) to proposal schedule. Operating independently complex work packages and ensuring alignment with program governance and assurance frameworks. Supporting complex infrastructure programs by integrating production principles into the planning and execution of engineering design deliverables. Driving high-quality outcomes through structured delivery approaches, proactive leadership, and a continuous improvement mindset, constructively challenging existing practices and applying lessons learnt. Monitoring production performance metrics, escalating risks and issues to workstream managers and driving improvement through feedback and reflection. Supports various projects, primarily in the engineering / construction industry. Prepares drawing packages, provides QA/QC, manages drawing list database, sets up CAD standards and resolves helpdesk issue Interacts with the client on CAD related issues Is part of the project team providing ongoing CAD support to designers Interacts and gets direction from the project manager Demonstrates excellent verbal and written communication skills Prioritizes tasks to meet deadlines Works effectively under pressure and be able to handle several concurrent tasks. Is a problem solver Works well as a member of a team Occasionally requires 'production' drafting Key Competencies Proactive issue identification and resolution mindset Detail-oriented with strong organizational and tracking capabilities Strong knowledge of AutoCAD in a support role Discipline experience a plus: Mechanical, Electrical, Architectural, or Structural Design or CAD experience with industrial, healthcare, or commercial facilities a plus Keen attention to detail Works well as a member of a team Why Join Us Be part of designing next-generation semiconductor and advanced manufacturing facilities Collaborate with multidisciplinary engineering experts on highly technical projects Influence Digital Delivery and BIM innovation within a leading design environment Competitive compensation, benefits, and professional growth opportunities High school diploma/GED required 2+ years of experience in design coordination, project support, permitting, architecture, engineering, construction, planning, or a related field. Strong capabilities in customer relationship systems, Microsoft Office Suite. Experience with Design Software(operating): AutoCAD, Revit Strong written and verbal communication skills, including interviewing skills. Attention to details and ability to build long-lasting business relationships Experience working with various jurisdiction permitting requirements Experience working on large design projects Visa sponsorship is not available for this role Preferred Qualifications Experience of working with clients. Exposure to semiconductor, cleanroom, advanced manufacturing, data center, life sciences, or other technically complex facility projects. * Familiarity with BIM Execution Plans, client BIM standards, and project-specific model coordination requirements. Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

This job opportunity is available at ANY location in the United States. Ideally, selected candidates will be near a JACOBS U.S. based office, but we intend to hire the "best" candidates. We are seeking a highly skilled VDC 4D Coordinator to join our team. This role is responsible for creating, managing, and optimizing 4D models that integrate time and schedule data with 3D models to support project planning, visualization, and execution. The ideal candidate will have strong technical expertise in BIM tools, construction sequencing, and collaborative workflows to drive efficiency and accuracy across projects. Key Responsibilities Develop and maintain 4D models for construction projects, integrating schedule data with 3D models. Collaborate with project teams to ensure accurate sequencing and alignment with project timelines. Analyze and validate construction schedules against 4D simulations to identify risks and opportunities. Provide visualizations and presentations to stakeholders for project planning and progress tracking. Support BIM/VDC workflows, ensuring compliance with company standards and industry best practices. Troubleshoot and resolve issues related to 4D modeling and data integration. Train and mentor team members on 4D modeling processes and tools 5+ years of experience in BIM/VDC with a focus on 4D modeling and construction sequencing. Proficiency in Synchro, Navisworks, Revit, and other relevant BIM tools. Strong Understanding of Revit Parameter Management and encoding to align model elements with schedule items. Strong understanding of construction schedules (Primavera P6) and their integration with models. Excellent communication and collaboration skills. Ability to manage multiple projects and meet deadlines in a fast-paced environment. Preferred Skills Bachelor's degree in Construction Management, Engineering, Architecture, or related field experience. Experience with 5D modeling (cost integration) is a plus. Familiarity with Lean Construction principles and advanced visualization techniques. * Knowledge of data analytics and reporting tools for project performance tracking. Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

This job opportunity is available at ANY location in the United States. Ideally, selected candidates will be near a JACOBS U.S. based office, but we intend to hire the "best" candidates. We are seeking a Digital Delivery Coordinator to support the design and execution of cutting-edge data center projects. This role will report to the Digital Delivery Sr. Coordinator and collaborate closely with project delivery teams, engineering leads, and BIM/VDC professionals to ensure seamless digital integration delivery across all project phases-from design through construction and system turnover. The ideal candidate is passionate about utilizing technology to drive efficiency, thrives in a fast-paced environment, and brings a strong understanding of BIM workflows, coordination tools, and data center design standards and has a passion towards growing their skills in technology to enhance our advanced work packaging workflows for Design and Construction. Key Responsibilities: Digital Coordination & Execution Support the digital delivery of large-scale data center projects across multiple disciplines. Coordinate BIM workflows and model setup using Revit and Civil 3D. Assist in assembling digital work packages in Navisworks, Revizto, or ACC. Post deliverables utilizing the Autodesk Construction Cloud (ACC) platform. Assist in model quality checking, digital close-out and asset data encoding for handover. Work with point clouds in design software. Process & Innovation Follow client standard operating procedures for digital delivery in the data center sector. Optimize workflows through the implementation of new digital tools and workflows. Stay current with industry trends and emerging technologies in BIM and digital construction. Improve utilization of point cloud scan data in creating as built models. Work with advanced work packaging team to integrate BIM modeling and cloud based platforms (ACC) Collaboration & Support Act as a liaison between project teams, digital delivery leadership, and client stakeholders. Provide technical support and training to project teams on digital tools and best practices as part of projects. Coordinate with global digital delivery teams to ensure alignment and knowledge sharing. Required: 2 or more years of experience in field construction, VDC, or digital delivery roles. Proficiency in Autodesk tools including Revit, AutoCAD, Navisworks, and ACC (Autodesk Construction Cloud). Experience working in fast paced design-build construction execution Strong communication, organizational, and problem-solving skills. Ability to work effectively in multidisciplinary teams and manage multiple priorities. Preferred: Bachelor's degree in Architecture, Engineering, Construction Management, or related field. Experience with scanning and asset data management. Experience with Civil 3D or AutoCAD. Professional certifications (e.g., Autodesk Certified Professional, PE license). Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

A leading engineering firm is seeking a Digital Design Lead in Salt Lake City.The role involves generating BIM elements, maintaining discipline models, and ensuring quality of digital delivery.Candidates should have a technical degree and at least 5 years of industry experience, with advanced skills

ConsultNet Technology Services and Solutions is seeking a Structural Designer in Salt Lake City, UT.

Zone Architecture Studio is looking for an experienced draftsperson or mid-level architect to join the team in Salt Lake City, Utah.The ideal candidate will manage all aspects of design from initial concept through to construction, collaborating with clients and contractors to achieve project goals.

Selectek is seeking a Structural Revit Designer in Salt Lake City, UT, offering a hybrid schedule.

Insight Global is seeking a highly experienced Revit Designer in Salt Lake City for industrial brownfield projects.

Structural Revit Designer Salt Lake City, UT | Hybrid Schedule Full-Time | $38 – $48/hr, depending on experience Job Overview We areseeking a Structural Revit Designer to support large-scale industrial and brownfield projects in the mining, energy, petrochemical, and heavy industrial sectors.

Selectek is seeking a Structural REVIT Designer in Salt Lake City, UT, to support large-scale industrial projects.

Job DescriptionMHTN is seeking an experienced Senior Healthcare Planner to join our growing healthcare practice. This position will help lead the planning and programming of healthcare environments that support exceptional patient care, operational efficiency, and long-term client goals. A successful candidate will partner closely with healthcare providers, administrators, architects, engineers, and design teams to translate clinical workflows and strategic objectives into innovative, functional healthcare facilities. This position offers a unique opportunity to immediately contribute to a large, complex healthcare project currently in design while helping shape the future growth of MHTN's healthcare practice. The ideal candidate brings expertise in healthcare planning, regulatory requirements, facility operations, and clinical workflow analysis and enjoys collaborating with multidisciplinary teams to solve complex healthcare design challenges. What you’ll do: • Lead healthcare planning and programming efforts for hospitals, ambulatory care facilities, outpatient and inpatient care environments, and other healthcare facilities., • Collaborate with user groups, facilitate stakeholder engagement sessions and planning workshops with healthcare clients., • Develop functional programs, space allocations, departmental relationships, and planning concepts., • Interpreting healthcare regulations, licensing requirements, accreditation standards, and applicable codes., • Collaborate and innovate with architects, interior designers, engineers, and consultants throughout all project phases., • Conduct operational assessments, facility evaluations, and strategic planning studies., • Mentor team members and contribute to the continued growth and technical excellence of MHTN's healthcare practice., • Participate in client presentations, project pursuits, interviews, and healthcare business development efforts. What you’ll bring: • Expertise in healthcare programming, planning, clinical workflow analysis, and the development of functional programs and planning concepts for complex healthcare facilities., • Comprehensive knowledge of healthcare codes, licensing requirements, accreditation standards, FGI Guidelines, life safety requirements, and healthcare building systems., • Strong understanding of healthcare delivery models, clinical operations, and healthcare planning best practices., • Exceptional facilitation, stakeholder engagement, and client relationship skills., • Excellent verbal, written, and presentation communication abilities., • Ability to lead multidisciplinary teams, manage competing priorities, and collaborate effectively across project stakeholders., • Strategic thinking, problem-solving, and decision-making skills., • Proficiency in Revit and BIM workflows; experience with AutoCAD, Bluebeam, and Microsoft Office Suite., • Knowledge of the local and regional healthcare market. Qualifications • Bachelor's or master’s degree in architecture from an accredited program., • Minimum of 10 years of healthcare planning experience, including leadership responsibility on healthcare projects., • Architectural licensure preferred., • Experience planning complex healthcare facilities, • Experience leading large acute-care hospital projects preferred., • Master planning and healthcare campus planning experience preferred., • Experience presenting to executive leadership and governing boards preferred., • Active participation in healthcare industry organizations preferred., • ACHA, EDAC, LEED AP, or other healthcare planning credentials preferred.Have you led healthcare planning efforts on complex healthcare projects? Do you enjoy collaborating directly with clinicians, administrators, and design teams to improve healthcare environments? If so, we encourage you to apply. This position is a full-time, salaried, overtime-exempt position based in Salt Lake City, Utah with a flexible hybrid work schedule. Compensation is competitive and commensurate with experience and qualifications, with an anticipated salary range of $120,000–$140,000 annually, as well as a signing bonus. To support a successful transition, candidates relocating to the Salt Lake City area may be eligible for a six-month cost-of-living stipend. This benefit is designed to help offset temporary housing and relocation-related expensed while settling into the area. Specific stipend details will be discussed with qualified candidates during the hiring process. To apply, please complete the online application. You will receive an automatic confirmation email once your application has been successfully submitted. Portfolio or work sample attachments are limited to 10 MB. Why MHTN? We offer a collaborative work environment that promotes professional growth and advancement. We seek team members who have a passion for designing built environments and contributors that will embrace and expand our culture of inclusion. We demonstrate our commitment to our team members by offering the following benefits. • Medical and Dental Insurance: MHTN pays 80% of the premium, • Life Insurance: MHTN pays 100% of the premium for life and AD&D, • Company-paid Short-Term Disability and Long-Term Disability: MHTN pays for 100% of the premium, • Additional benefits available through our Cafeteria Plan, • 401k with 5% employer match, • Annual discretionary bonus opportunity for all employees, • Company-paid continuing education and mentorship programs, • Paid licensure and industry memberships, • Flexible paid time off, • Flexible hybrid work schedule, • Signing bonus, • Relocation assistanceAbout MHTN MHTN Architects creates memorable and meaningful environments for people. Established in 1923, we are an intermountain west Architecture, Interior Design, Landscape Architecture, and Planning firm committed to a culture of design excellence. We serve clients with expertise and innovation in Higher Education, Commercial, K-12 Education, Healthcare, Manufacturing, Civic, Cultural and Religious project design. With a team of 115 professionals, seven Core Values drive our actions: Design, Social & Environmental Responsibility, Teamwork, Technical Excellence, Empowerment, Respect, and Service. MHTN Architects is an equal opportunity employer committed to diversity and inclusion. Powered by JazzHR 1ULYHmZzwF

Job Description About the Job We are seeking experienced Electrical Engineers with strong technical capabilities to support and advance our building electrical engineering practice. The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for food and beverage production facilities. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: • Lead in designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities., • Take the lead in documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc., • Designing lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinating fixture placement/mounting with other trades., • Designing fire alarm systems per NFPA 72, 101, and local building code., • Designing low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc., • Producing bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications., • Procuring long lead light fixtures and power distribution equipment such as switchgear, switchboards, panelboards, transformers, MCC’s, generators, variable speed drives, and UPS’s., • Manage electrical bid process for clients, observing construction, and assisting with startup., • Project planning and feasibility studies., • Take the lead in participating in and supporting department-wide standard development, updates, and maintenance., • Researching electrical building/power materials and best practices, • Assists with interviewing and hiring new team members, • Handle complex issues and tasks with minimal supervision and advise subordinate team members on solutions to issues they encounter., • Provide coaching and/or mentoring to a subordinate group when directed by supervisor About You • Bachelor of Science in Electrical Engineering or related 4-year degree, • 8-11 years of work experience in electrical systems for building power., • 8-11 years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades., • 8-11 years of work experience in electrical bid documents and procuring electrical materials and equipment., • 8-11 years of work experience in AutoCAD, Revit or other related design programs., • Relevant experience in a manufacturing or construction setting preferred., • FE or PE tracked desirable., • Travel to customer project sites for fieldwork, review, audit, and meetings, estimated 25% - 35%. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description We are looking for a Mechanical Designer to plan, design, and implement mechanical systems for industrial food and beverage production facilities. In this role you will work on multi-disciplinary project teams and have an opportunity to perform, practice, and apply a wide range of mechanical design engineering skills. Responsibilities • Set-up and generation of mechanical drawings for client review, bidding and construction, • Assist in mechanical design:, • Development of HVAC, plumbing, and utility piping plans, • Size and develop layouts for ductwork and piping plans, • Develop mechanical/utility equipment and construction drawings, • Mechanical Department design support:, • Work with mechanical team members to maintain and improve REVIT templates and content, • Coordinate design/design standard efforts with other trades within Dennis Group (Architectural, Electrical, Process) About You • 0-3 years HVAC and/or utilities design experience, • 0-3 years’ experience with Revit, AutoCAD, Navisworks, and Autodesk Construction Cloud/Forma, • Experience with mechanical construction drawings, • Experience with an engineering firm preferred, • Willing to travel 10-15% to client job sites, • Ability to communicate effectively with all levels of internal staff and clients, • Detail oriented with problem solving skills About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do; it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Job Summary Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities. Specifically, HVAC, plumbing / utility, and fire suppression systems. Our mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Mechanical Engineers will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. You will be a member of our mechanical department and your responsibilities will include, but not be limited to: Responsibilities • May work independently or with other ME’s, depending on project size, • Execute all tasks necessary to complete the engineering on a project from design through execution, • Perform heating and cooling load calculations, • Code reviews for HVAC/plumbing/fire protection designs, • Perform mass energy balance calculations, • Perform drainage and line loss calculation, • Perform flow test (hydrant or other) analysis, • Sanitary design considerations (layouts, process exhaust), • PID drafting & design, • Bid package: equipment and sub-contractor – bid list, scope of work, milestone schedule, • Provide cost estimation and scheduling to PMs, • Bid Review, • Peer design review, • Scheduling – MS Project, • Discipline lead for commissioning activities, • Equipment selection, • Vendor and Sub-contractor selection, • Controls functional description development, • Create mechanical schedules, • Present engineering findings to client, • Building code familiarity, compliance & review, • Insurance carrier requirements – familiarity and review, • Vendor shop inspection / FAT, • Develop HVAC, plant utility, plumbing, and fire suppression systems, • Assist in mechanical system design development and coordinating with other internal and external team members, • Develop Mechanical / Utility equipment and construction specifications, • Develop P&ID’s, equipment layout plans, plant / process utility distribution plans, and system details, • Size and develop layouts for ductwork and piping plans, • Assist with the development of the building management system (BMS) controls, details, and plans with electrical and controls engineers, • Create project documents such as calculations, reports, and construction drawings and specifications, etc., • Fixture selection, • Perform construction administration in the form of submittal reviews, RFI responses, and field visits to verify construction scope is proceeding per the intent of the design, • Research mechanical / utility materials and best practices, • Support talent growth within our organization, • Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience • Bachelor of Science in Mechanical Engineering or related field, • 4-7 years of work experience in heat transfer, fluid dynamics, and thermodynamics, • 4-7 years of work experience with HVAC/plumbing/fire protection designs and specifications., • 4-7 years of work experience performing calculations in areas of energy, drainage, line loss, etc., • 4-7 years of experience working with computer operations for engineering design programs and computer aided drafting (AutoCAD, Revit, etc.), • Basic report writing and communication skills, • Relevant work experience in an industrial manufacturing setting preferred, • FE/EIT certificate preferred, • Strong technical writing skills, • Travel to customer project sites for review, audit, and meetings, estimated 10-25% Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Western Partitions, Inc. (WPI) is one of the largest and most reputable interior and exterior contracting firms in the US. WPI provides superior contracting services for drywall, prefabrication, metal studs, acoustical systems, wall panels, fireproofing, firestopping, stucco, claddings, painting, windows, doors/frames/hardware, and more. Since WPI's inception in 1972, we have provided award-winning construction without sacrificing integrity, safety, or efficiency. We are proud that a significant percentage of our business comes from repeat customers. Our service-oriented, fast-track approach, coupled with an attention to detail has resulted in a superior reputation within our industry. We work hard every day to earn our customers' trust and confidence. Throughout our history, our dedication to our employees, quality of work, and customers has set us apart. The strongest characteristic of our organization is the prominent level of pride we take in every job we complete. Our employees are driven to do the job right the first time without compromise. Lastly, our customers choose WPI based on the emphasis we place on communication, trust, and respect. Position Overview The Product Design Engineer supports the design and development of manufactured equipment for mission-critical facilities. This is an entry-level, individual-contributor role, ideal for a recent graduate, working under the guidance of senior engineers to create integrated, modular, and prefabricated equipment solutions. The role sits at the intersection of product design, manufacturing, and data center construction, learning to ensure that designs meet the technical requirements of data centers while being optimized for manufacturing and assembly. The primary focus of the role is supporting the design of technology products related to data center construction, such as hot aisle containment and other prefabricated systems. This position offers structured mentorship and hands-on training. It requires a foundational understanding of engineering and design principles and a willingness to develop working knowledge of data center functions — including structural, mechanical, electrical, and technology systems — along with a commitment to delivering high-quality, well-coordinated work. This position is based in Wilsonville, Oregon or Salt Lake City, Utah. Key Responsibilities • Assist senior engineers in designing hot aisle containment solutions for data centers that are modular, prefabricated, and tailored to specific client needs., • Support the development and refinement of manufactured equipment solutions for mission-critical environments, focusing on manufacturability and ease of integration., • Contribute to a cross-functional team in the design and development of new products., • Help maintain project plans and timelines for assigned products, tracking tasks and deadlines., • Support product management and other stakeholders in gathering and documenting product requirements and specifications., • Conduct research, under direction, to identify new product opportunities and technology trends., • Learn and apply relevant regulatory requirements and standards to assigned work., • Participate in product testing and validation activities., • Assist in maintaining relationships with suppliers, vendors, and partners., • Collaborate closely with the Engineering and Manufacturing departments to understand how designs are made feasible, cost-effective, and aligned with production capabilities., • Build knowledge of data center functionality, including structural frames, mechanical cooling systems, electrical distribution (rackbus, tap boxes), and technology infrastructure., • Attend client meetings to observe and learn how designs are refined based on client requirements., • Support design validation through prototype, pre-production, and first-of-kind builds, assisting with DFx and value engineering analysis and updating design and documentation under guidance., • Help produce documentation of designs, including product submittals and technical specifications., • Create and maintain 3D models for coordination with other trades and for use in presentation materials for clients and internal stakeholders., • Ensure assigned designs comply with industry standards and client-specific requirements for mission-critical facilities. Qualifications & Skills Required • Education: Bachelor's degree in Mechanical Engineering, Industrial Design, Product Design, or a related engineering field., • Experience: 0–1 years of experience. Recent graduates are encouraged to apply; internship, co-op, or academic project work in product or mechanical design is a plus., • Software Proficiency: Exposure to or coursework in Inventor, SolidWorks, or other 3D design software. Willingness to learn Revit and Bluebeam Revu. Familiarity with Microsoft Office products., • A foundational understanding of engineering and design principles, with a strong willingness to learn and take direction. Preferred • Internship or co-op experience in product design, mechanical design, or manufacturing., • Coursework or project experience involving modular or prefabricated systems, or design for manufacturing (DFM/DFx)., • Exposure to or interest in data center construction and functionality (structural, mechanical, electrical, and technology systems)., • Familiarity with mission-critical infrastructure., • Strong organizational skills and the ability to manage multiple tasks and deadlines., • Strong communication skills for collaborating across engineering, manufacturing, and client teams. Work Environment & Travel This position is based in Wilsonville, Oregon or Salt Lake City, Utah. Occasional travel may be required to visit jobsites, manufacturing facilities, and client locations to support project coordination and learn product deployment. Benefits At WPI our employees are our greatest asset. We put our people first and are proud to provide a comprehensive benefits package designed to meet the needs of our employees at every stage of life. In our commitment to fostering an environment where everyone can thrive personally and professionally, we offer: • Competitive pay, • Incentive bonus plan, • 401(k) retirement savings plan with match, • Medical, prescription drug, dental and vision insurance plans with flexible spending account option, • Life insurance, accidental death, and disability benefits, • Flexible paid time off policy and paid holidays WPI provides equal employment and affirmative action opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. WPI is a background screening, drug-free workplace. Updated 6-5-26

Job Description Job Summary Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities. Specifically, HVAC, plumbing / utility, and fire suppression systems. Our mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Mechanical Engineers will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. You will be a member of our mechanical department and your responsibilities will include, but not be limited to: Responsibilities • Work independently on projects, • Work several projects simultaneously, • Execute all tasks necessary to complete the engineering on a project from design through execution, • Perform heating and cooling load calculations, • Code reviews for HVAC/plumbing/fire protection designs, • Perform mass energy balance calculations, • Perform drainage and line loss calculation, • Perform flow test (hydrant or other) analysis, • Sanitary design considerations (layouts, process exhaust), • PID drafting & design, • Bid package: equipment and sub-contractor – bid list, scope of work, milestone schedule, • Provide cost estimation and scheduling to PMs, • Bid Review, • Peer design review, • Scheduling – MS Project, • Discipline lead for commissioning activities, • Equipment selection, • Vendor and Sub-contractor selection, • Controls functional description development, • Create mechanical schedules, • Present engineering findings to client, interfaces directly and regularly with client, • Building code familiarity, compliance & review, • Insurance carrier requirements – familiarity and review, • Vendor shop inspection / FAT, • Develop HVAC, plant utility, plumbing, and fire suppression systems, • Assist in mechanical system design development and coordinating with other internal and external team members, • Develop Mechanical / Utility equipment and construction specifications, • Develop P&ID’s, equipment layout plans, plant / process utility distribution plans, and system details, • Sizing and developing layouts for ductwork and piping plans, • Assist with the development of the building management system (BMS) controls, details, and plans with electrical and controls engineers, • Create project documents such as calculations, reports, and construction drawings and specifications, etc., • Fixture selection, • Perform construction administration in the form of submittal reviews, RFI responses, and field visits to verify construction scope is proceeding per the intent of the design, • Research mechanical / utility materials and best practices, • Support talent growth within our organization, • Provide coaching and/or mentoring to a subordinate group when directed by supervisor., • Handle complex issues and tasks with minimal supervision and advise subordinate team members on solutions to issues they encounter. Required Education Skills and Experience • Bachelor of Science Degree in Mechanical Engineering or related 4-year degree, • 8+ years of demonstrated HVAC and utilities experience; mechanical experience in food and beverage, pharmaceutical, or other sanitary environments is a plus, • 8+ years of experience HVAC and/or Utilities design and specifications experience, • 8+ years of experience working with computer operations for engineering design programs and computer aided drafting (AutoCAD, Revit, etc.), • 8+ years of experience performing calculations in areas of energy, drainage, line loss, etc., • Registered Professional Engineer (PE) is a plus, • Travel to customer project sites for review, audit, and meetings, estimated 10-25% Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • ~25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description About the Job We are seeking talented individuals to support our building structural practice (industrial & Commercial buildings). You will play a key role in the design, permitting, and construction of food facilities throughout the United States. You will be a member of our structural department and responsibilities will include, but not be limited to: • Applying extensive and diverse knowledge of principles and practices for a wide range of materials and construction techniques., • Lead in performing hand calculations and creating computer analysis models for structural design tasks., • Lead in coordinating structural work with other disciplines, • Drafting sketches, contract drawings, and specifications using AutoCAD., • Reviewing project documentation for conformity and quality assurance., • Reviewing shop drawings, submittals, and calculations, • Lead in estimating construction costs with quantity take offs and historic costs, • Conducting field inspections & condition assessments and prepare reports, • Researching structural engineering materials and best practices, • Supporting talent growth within our organization, • Assists with interviewing and hiring new team members, • Handle complex issues and tasks with minimal supervision and advise subordinate team members on solutions to issues they encounter., • Provide coaching and/or mentoring to a subordinate group when directed by supervisor. About You • Bachelor's degree in Civil Engineering or Structural Engineering, • 8+ years of relevant structural experience (industrial and commercial building structure), • 8+ years of experience performing calculations, creating analysis models for structural designs, • 8+ years of experience in structural and concrete drafting sketches, contract drawings, and specifications using AutoCAD and Revit, • RAM Structural system and RAM Elements knowledge or experience is a plus, • Professional Engineer (PE) License, • Detailed planning and organization skills., • Experience with structural analysis software, • Ability to travel to project sites as needed (15 days a year) About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionFollow your star! Norda Stelo means Northern Star, where the possibilities are endless in terms of innovation, development and commitment. Our vision is collective and our DNA is truly human! The team behind the genius Our team of experts in integrity and reliability is dedicated to the prevention of equipment and structural failures. Our clients can count on this expertise in preventing failures at all stages of the life cycle of their critical assets in order to exploit them in an ever safer and more profitable way. With our expanding client base and growing project needs, we are looking to add an intermediate structural engineer to join our growing and dynamic Asset Integrity and Reliability Management Division. There is a growing demand in our Salt Lake City office; this position provides a unique opportunity to collaborate with a small team and expand operations and clientele in the local area. This position is ideal for a professional engineer with solid technical experience and has had on-site exposure with heavy industrial sites and critical infrastructure. The position operates in a hybrid work environment, providing flexibility for both remote and in-office work, while requiring periodic short-term site visits to multiple facilities in the local area. The office is in our Salt Lake City located, which comprises of a small (less than 5), but growing team. The candidate will be supported by Norda’s wider asset integrity team and expertise, based out of Canada. This is your chance to take the lead on asset integrity projects, and establish good working relationships with clients in the local area. Our expertise is diversifying, how about you? As a new member within the ASSET Integrity & Reliability Management Division, you will be involved in performing equipment and facility condition inspections, compiling and writing technical reports and memorandums, completing structural design work and analysis (steel, concrete, and timber), conducting on-site construction reviews, and preparing drawings, fee estimates, and service proposals. As well, you will be involved in communicating directly with local clients and building positive business relationships. This position will have a strong focus on condition inspections, maintenance, and repair/replacement projects which support the mining, bulk materials handling, and heavy industrial. Key Responsibilities: · Liaise effectively with clients, contractors, and third parties to ensure successful project delivery and build long-term professional relationships. · Preparation of technical reports, design documents, structural repair packages, construction drawings in accordance with relevant codes and standards. · Participate as the Engineer of Record on a team to carry out condition inspections and assessment works for multiple clients and facilities in the local area. This position requires short-term travel to job sites. · Provide support and mentorship to junior engineers. · Contribute to project planning, project management, cost estimation, proposal writing, and scheduling. · Partipcate in internal technical reviews and ensure design quality and constructability. · Design and analyze structural systems in the bulk handling, mining, ports, and heavy industrial sectors. This could include, but not limited to, bulk loading/unloading infrastructure, industrial buildings, marine structures, equipment support structures, conveying equipment Our must-haves The ideal candidate will possess the following qualifications and characteristics: A bachelor’s degree in Civil or Structural Engineering Registered as a Professional Engineer (PE) in the state of Utah 10 to 15 years of structural engineering experience in industrial facilities Minimum 5 years of experience in mining and/or materials handling industries Strong knowledge of design codes and standards for steel and concrete structures (i.e. AISC, ACI, ASCE) Knowledge or familiarity with local building codes, safety standards, and construction practices is a benefit but is not necessarily required. Knowledge or familiarity with structural analysis and design software’s (i.e. RISA, SAP2000, STAAD) Knowledge or familiarity of 2D and 3D drafting software (I.e. AutoCAD, Revit,) is a benefit but necessarily required. Proven experience in field investigations, condition assessments, and/or field reviews. Proven ability to work independently and as part of a collaborative team. Excellent communication and interpersonal skills with the ability to represent the company professionally to client and external stakeholders. Excellent written and verbal communication skills in English, with proven technical report writing. A willingness to complete short-term travel to conduct field inspections of heavy industrial equipment. Valid Class 5 BC driver’s license. This role is ideal for candidates who enjoy a mix of field and office work. It involves hard work and a steep learning curve but provides great exposure to a broad range of engineering challenges and an opportunity to grow quickly and take-on more responsibility, with an exposure to a wide range of industrial on-site and off-site work. The ASSET division is made-up very well-rounded engineers who are highly valued in the industry. There are opportunities for leadership development and long-term career growth. You don't have all the required experience? Apply anyway! Norda Stelo is fully committed to the principle of equal access to the workplace and strongly urges women, people from culturally diverse backgrounds, people with disabilities, people from LGBTQIA2+ communities, aboriginal people and/or people from traditionally marginalized groups to apply.. We can accommodate your needs. For more information about our accessible workplace and inclusive culture, please contact us at Talents@norda.com

Job Description Interior Designer - Furniture Specialist Location: Murray, UT Job Type: Full-Time About Us Liv Design Collective is an award-winning interior design firm in the luxury residential and commercial design industry. We design with a focus on client happiness and know that our relationships are our greatest strength. We have clients in several locations across the US and are continuing to grow. We are seeking the right team members to help us continue to succeed and support our growth. Our team is skilled and smart. As national industry leader in design, we focus on total solutions for clients, architects, and builders. If you are an experienced designer who is ready for the next step, this could be for you! Job Description: As an Interior Designer - Furniture Specialist, you will play a critical role in shaping our clients' spaces to enhance aesthetics, comfort, and functionality. This position requires a deep understanding of interior design principles, with a strong emphasis on furniture selection, arrangement, and custom solutions. Key Responsibilities: • Collaborate with clients to understand their vision, needs, and budget for residential or commercial spaces., • Design and implement interior environments that integrate furniture design concepts, ensuring a cohesive and functional layout., • Develop detailed plans and presentations, including mood boards, 3D models, and sketches to communicate design ideas effectively., • Source, select, and specify furniture, finishes, fabrics, and materials, with experience and a good eye for color, paint and lighting., • Work closely with vendors and manufacturers to ensure the procurement and delivery of furniture pieces are on time and within budget., • Stay current with industry trends, materials, technologies, and sustainable practices to advise clients on innovative solutions., • Manage multiple projects simultaneously, maintaining schedules and ensuring all aspects of the design process meet company standards., • Conduct on-site evaluations and offer solutions for interior space planning and furniture placement., • Coordinate with cross-functional teams, including architects, builders, and lighting designers, to realize successful project outcomes. Qualifications: • Bachelor's degree in Interior Design, Furniture Design, or related field., • A minimum of 2 years of experience in interior design, with a focus on furniture solutions., • Proficiency in design software such as AutoCAD, SketchUp, or Revit., • Strong portfolio showcasing your design expertise and successful past projects., • Excellent communication skills, with the ability to articulate ideas and interact with clients and team members., • Exceptional attention to detail and problem-solving capabilities., • Ability to work independently as well as collaboratively in a fast-paced environment.

Job Description About the Job As a design/build engineering firm and general contractor, Dennis Group’s Architects support our industrial architectural practice in designing and building food and beverage processing facilities. Our projects are industrial projects that are complex and require frequent interaction with our project managers, process designers, and multiple different disciplines of engineering staff. The Architect is a key role in all phases of architectural design and facility programming for defining spaces and their characteristics from proposal development through construction administration. Architects apply knowledge in areas of sanitary design, building materials, and construction methods. As a Project Architect on the Dennis Group team responsibilities include, but not limited to: • Prepare programming and concept development documentation to meet clients’ needs and budget, • Establish budget, task schedule, and other components of a project work plan with the Project Manager, • Execute applicable agency review analysis for codes, zoning, accessibility, life-safety, etc., • Carry out design and architectural detailing tasks including site and building planning studies, elevation studies, stairs, functional space layouts, building sections, wall sections, special details, etc., • Produce schematic, design development and construction documents; make decisions and negotiate critical issues in collaboration with the Project Manager and other team members, • Provide leadership to the project team (all disciplines) for documents coordination including design drawings construction documentation and specifications, • Help maintain and improve office architectural standards, details and production tools., • Perform construction administration duties - RFI’s, RFP’s, change orders, on-site observation, etc., • Maintain contact with clients, consultants, and contractors, • Participate in marketing efforts and presentations to prospective clients About You • Master’s or Bachelor’s degree in Architecture, • 10+ years of professional experience in all phases of architectural projects, • Architectural license desired with LEED accreditation a plus, • A broad range of commercial/industrial project experience is desired, • Experience with building codes, specifications, building and engineering systems, • Proficiency in AutoCAD and Microsoft Office is necessary. Experience with Revit is a preferred but not required., • Advanced experience in all phases of a project including construction documentation review, • Understanding of the project management process, • Effective verbal, written and graphic communication skills, • Professional and collaborative work ethic Candidates must be open to overnight travel not less than 25% of any given year to client facilities and construction sites. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description About the Job As a design/build engineering firm and general contractor, Dennis Group’s Architects support our industrial architectural practice in designing and building food and beverage processing facilities. Our projects are industrial projects that are complex and require frequent interaction with our project managers, process designers, and multiple different disciplines of engineering staff. The Architect is a key role in all phases of architectural design and facility programming for defining spaces and their characteristics from proposal development through construction administration. Architects apply knowledge in areas of sanitary design, building materials, and construction methods. Responsibilities • Prepare programming and concept development documentation to meet clients’ needs and budget, • Establish budget, task schedule, and other components of a project work plan with the Project Manager, • Execute applicable agency review analysis for codes, zoning, accessibility, life-safety, etc., • Carry out design and architectural detailing tasks including site and building planning studies, elevation studies, stairs, functional space layouts, building sections, wall sections, special details, etc., • Produce schematic, design development and construction documents; make decisions and negotiate critical issues in collaboration with the Project Manager and other team members, • Provide leadership to the project team (all disciplines) for documents coordination including design drawings construction documentation and specifications, • Help maintain and improve office architectural standards, details and production tools., • Perform construction administration duties - RFI’s, RFP’s, change orders, on-site observation, etc., • Maintain contact with clients, consultants, and contractors, • Participate in marketing efforts and presentations to prospective clients About You • Master’s or Bachelor’s degree in Architecture, • Professional experience in all phases of architectural projects, • Architectural license desired with LEED accreditation a plus, • A broad range of commercial/industrial project experience is desired, • Experience with building codes, specifications, building and engineering systems, • Proficiency in AutoCAD and Microsoft Office is necessary. Experience with Revit is a preferred but not required., • Advanced experience in all phases of a project including construction documentation review, • Understanding of the project management process, • Effective verbal, written and graphic communication skills, • Professional and collaborative work ethic Candidates must be open to overnight travel not less than 25% of any given year to client facilities and construction sites. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Senior Architect - Southern Idaho Overview VCBO Architecture is seeking a Senior Architect to lead the design and delivery of projects across a range of sectors. This role supports a hybrid work model, including remote work and regular travel to project sites throughout southern Idaho, including Boise and Pocatello. The position collaborates closely with VCBO’s Utah-based team, supporting integrated project delivery across offices. It is ideal for an experienced professional who can lead project components with independence, mentor team members, and ensure high-quality design and technical execution. You’ll take ownership of key project phases, coordinate across disciplines, and play a critical role in delivering successful outcomes from concept through construction. You’ll also collaborate with team members across multiple VCBO offices, supporting integrated project delivery and firmwide coordination. About VCBO VCBO is an award-winning, integrated design firm headquartered in Utah with a team of over 130 professionals and projects across the globe. Our work spans Civic and Recreation, Healthcare, Higher Education, Hospitality, and K-12 Education sectors, with a focus on delivering functional, sustainable, and forward-thinking design solutions. We value mentorship, professional growth, and a collaborative studio culture where people are respected, supported, and enjoy working together. Key Responsibilities • Lead design, documentation, and coordination across multiple project phases, • Oversee preparation of drawings and models for schematic design, design development, and construction documentation, • Apply advanced knowledge of building systems, codes, and construction methods to project work, • Coordinate with internal teams, consultants, and contractors to ensure alignment and quality, • Serve as a key contributor in client communication, presentations, and project decision-making, • Lead construction administration efforts, including RFIs, submittals, site visits, and issue resolution, • Ensure quality, organization, and consistency across deliverables Qualifications • Bachelor’s or Master’s degree in Architecture or related field, • Typically 8–15 years of professional experience, • Licensed Architect required, • Advanced proficiency in Revit; familiarity with additional design tools (SketchUp, Rhino, Adobe Creative Suite) a plus, • Strong knowledge of building codes, construction documentation, and multidisciplinary coordination, • Proven ability to lead project components and mentor team members, • Strong communication, organization, and problem-solving skills, • Ability to work independently, collaboratively, and in a hybrid environment including active construction sites

Job Description Genesis Technical is seeking a Site Electrical Engineer with an EPC office background for a full-time, direct position Corinne, UT. Summary: • Design power system facilities and equipment and coordinate construction, operation, and maintenance of electric power generating, receiving, and distribution stations, and distribution systems and equipment, • Develop conceptual layouts and sketches to drive the most efficient design on a project-by-project basis, • Participate in the planning, scheduling, conducting and coordinating detailed phases of electrical engineering projects, • Develop equipment specifications, • Develop construction specifications and contractor scope of work documents, • Directs preparation of or prepares drawings and specific type of equipment and materials to be used, in construction and equipment installation, • Inspects completed installations for conformance with design and equipment specifications and safety standards, • Work products will include: one-line diagrams, wiring drawings, panel layout drawings, motor schematics, instrument loop sheets, conduit and tray routing drawings and contractor scope documents, • Work with systems and equipment grounding requirements (high resistance, building and isolated grounding), • Provide on-site, start-up support Background/Experience: • 5+ years of experience with design/installation of medium and low-voltage distribution equipment, with experience in consulting engineering and construction industry, • Strong knowledge of applicable codes and standards (NEC, ANSI, NEMA, NFPA), • Able to handle onsite plant projects with minimal supervision, • Well organized with a demonstrated ability to meet deadlines and operate within budgets and work directly with client engineers and maintenance teams., • Working knowledge of Autodesk Revit., • Capability with CAD systems including AutoCAD, • PE license or EIT certificate with ability to obtain PE license is preferred but not requiredCompany DescriptionAt Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things. Genesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things.\r\n\r\nGenesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\n\r\nBy applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/

Job Description B.H. Inc., of Salt Lake City, Utah, is searching for a full-time CAD Designer/Modeler to design/model and detail the design of moderately complex projects while working closely with the Engineering and Fabrication teams to facilitate the successful accomplishment of project goals and objectives. This position will be based out of our Vernal, Utah Corporate office. Do you have extensive experience in Autodesk CAD and 3D Modeling software? Do you have experience with civil, architectural, MEP, Process design and detailing? Are you looking for the right company to take your career to the next level? If so, please read on! We are willing to pay for the best candidate for this CAD Designer/Modeler role. If you have what we're looking for, your salary is highly negotiable and could exceed our range of $60,000 to $85,000. We also offer perks and benefits, including weekly pay, health, vision, dental, life insurance, a 401k plan with match, and liberal paid time off (PTO). If this sounds like the right CAD Designer/Modeler opportunity, consider joining our team today! QUALIFICATIONS FOR A CAD Designer/Modeler • 4+ years of related professional experience or other comparable experience & experience using Autodesk CAD and 3D Modeling Software (Revit, Civil3D, AutoCAD Plant 3D, Tekla, SDS, Inventor, Etc.)., • Knowledge and experience in the following is preferred, but not required., • Civil design and detailing. As well as survey related plat drafting and mapping systems., • Architectural design & Structural design, as well as layout using Revit or other similar software., • Structural steel fabrication detailing and API and ASME Tank and pressure vessel detailing. We are really looking for the best person for this position and want to see what's out there! Are you a problem-solver? Do you have excellent interpersonal skills? Are you self-motivated and able to motivate others? Are you goal-oriented and always looking for ways to improve? If so, you might just be perfect for this CAD Designer/Modeler position! ABOUT B.H. INC. (BHI) Brad Haslem of Vernal, UT, started BHI with six others in 1998. What began as a small electrical company is now a multi-faceted powerhouse that offers various construction services. Our services include instrumentation & electrical, civil & excavation, facilities & pipeline, construction management, wireless & communications, renewables, site development, and engineering. We have offices in Salt Lake City, UT; Vernal, UT; Ogden, UT; Hobbs, NM; Rock Springs, WY; Dickinson, ND; Windsor, CO; Medicine Lodge, KS; and Midland, TX. BHI is recognized and respected nationwide in the industries we serve. We are a group of highly motivated, aggressive, goal-oriented individuals who love working as a team and growing our organization. We look at each other as family, not merely co-workers who punch the same clock. We firmly believe our core responsibility is to develop people and provide for families. We have a positive work environment here at BHI and offer excellent pay and generous benefits. A DAY IN THE LIFE OF A CAD Designer/Modeler As the CAD Designer/Modeler within our engineering division, you will work with a range of differing projects. You will pay attention to detail and be proficient in gathering project details and communicating with our engineering, survey, VDC, and fabrication teams. You play an essential part in preparing 3D models and drafted plans and details, following design codes and governmental regulations, and creating drafting models using CAD and 3D Modeling software. You will help to identify and address potential issues promptly. In addition, as a CAD Designer/Modeler, you will be responsible for a diverse range of tasks. These could include aiding our engineering teams in preparing designs or construction plans in Civil 3D, modeling structural design layouts, modeling buildings and equipment, preparing 3D coordination models for construction teams, drafting structural steel fabrication detailed plans, or preparing tank or process equipment designs in Inventor, or other software. Experience working with Inventor, Civil 3D, Revit, and SolidWorks is highly preferred, as this software will be a minimum weekly, if not daily. READY TO JOIN OUR TEAM? We understand your time is valuable, so we have a very quick and easy application process. If you feel you would be the right fit for this CAD Designer/Modeler position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. EEO, including disability and vets #INDSJ2 Job Posted by ApplicantPro

Job DescriptionSalary: Hunt Electric, Inc.is seeking anElectrical Revit Operatorto join our team. The Electric Revit Operator is a full time position with opportunities to grow and expand your knowledge in our VDC/Preconstruction team. TheElectrical Revit Operatorwill work with internal and external teams comprised of engineers, BIM and Revit operators, General Contractors, Project Managers and Owners to produce high quality models and shop drawings for construction. Major Duties: • Develop BIM Models - Create and maintain accurate 3D models of electrical systems including telecom, fire alarm & security when required., • Implementing BIM Execution Plan Review and implement project specifications and BIM LODs, as well as following industry and company standards., • Collaboration Working closely with project managers, foremans and other project teams to coordinating and resolve design conflicts. Attending meetings when necessary., • Project Documentation - Produce accurate and constructable plan sets, schedules and detailed drawings., • Support Assist and support of developing and maintaining project standards., • Actively contributes to a positive team environment., • Demonstrates dependability with regular attendance and compliance to scheduled work hours., • Be a self starter., • Other duties or locations as assigned by Manager. Minimum Qualifications: • Experience in working with BIM software including Revit, Navisworks or Revizto., • Experience with electrical systems, ability to read a single line and plan sets., • Ability to actively listen, understand, and respond to diverse perspectives., • Demonstrate ability to think critically, identify root causes, and develop creative solutions., • Working with cloud-based models., • MS Office including Word and Excel., • Autodesk certification or associate degree in AutoCAD/Revit drafting and design. As a full-timeElectrical Revit Operator, you would also be eligible for an excellent benefits package, including medical, dental, life insurance, short and long-term disability, a 401(k) plan, and paid personal time (PTO). About Hunt Electric Hunt Electric, Inc. is a full-service electrical, technology, and infrastructure contractor with wide-reaching services available in a variety of markets. Headquartered in Salt Lake City, we have additional branch locations in Denver, CO, St. George, UT, and Boise, ID. Since 1986, we have experienced tremendous growth with plans to continue expanding our services and markets served. If you are looking for a merit-based company where you can improve your skills, grow your career, and enjoy your work, look no further and apply today! Work Schedule This is a full-time position with a typical working schedule of Monday - Thursday 7:00am - 4:30pm and Friday 7:00am - 2:00pm.

Job DescriptionOur Ideal Candidate As the ideal candidate you will take professional pride in providing top notch structural engineering solutions for the commercial, industrial, healthcare, multi-family residential and higher education sectors. You will work with a variety of materials allowing you to quickly gain experience and knowledge to produce quality work in a supportive and fun team environment. About BHB BHB is the first firm called for structural engineering consultation. In business for over 20 years, our work environment is fun, fast paced, and challenging, with weekly in-office training and a clear path for personal advancement. Our team focuses on responsiveness, coordination, and creativity. We do this by producing well-coordinated, high quality structural drawings and are proud of our unmatched customer service. BHB Benefits To attract the best people our salary/benefit package is second to none. Besides a Competitive Salary, some of the areas that set us apart are: • Our career development paths and opportunities for progression, • Hybrid, remote and flexible work schedule possibilities, • Overtime compensation/bonus is paid to all employees, • Profit sharing, • Automatic employer 401(k) contribution, • 100% Health, dental, group life, short-term, and long-term disability insurance, • Expanded EAP available for physical, mental, social and financial health, • Paid Parental LeaveResponsibilities, • Perform structural calculations for concrete, steel, wood, and masonry structures, • Structural model using computer-aided design software (Revit, RAM, etc.), • Redline structural drawings, details, and schedules., • Interpret building codes & material codes, • Collaborate with teams both internally & externally Applicant Requirements, • Concrete, steel, and wood college course work or design experience, • Minimum 3+ years of building design experience, • EIT Certification, • Bachelor's Degree in Civil Engineering (Emphasis in Structural Engineering), • Master's Degree in Civil Engineering (Emphasis in Structural Engineering) is strongly preferred., • Communicate well with team members, • Experience with RAM, RISA, REVIT, AutoCAD and Excel helpful. Powered by JazzHR kpK2oJfkGT

Job Description A well-established MEP consulting engineering firm with over four decades of experience delivering complex institutional projects across the Intermountain West. With a strong presence in Colorado, Idaho, and Wyoming, they are now building their Salt Lake City office and need the right leader to own it. Project portfolio includes hospitals, research labs, federal facilities, K–12 campuses, and university buildings. Known for technical depth, long-term client relationships, and a culture where engineers do serious work. Position Overview This is an office-building role, not a seat-filling role. The firm is looking for a senior mechanical engineer who is ready to transition from contributor to leader — someone who can develop clients, build a team, drive revenue, and own the P&L of a new market from the ground up. You will have the backing of an established firm with the autonomy to shape the Salt Lake City presence from day one. Key Responsibilities • Build and lead the Salt Lake City office, including hiring, culture development, and P&L accountability, • Serve as the firm's senior technical and market presence in the Utah region, • Drive business development — cultivate relationships with owners, architects, and contractors, • Lead pursuit strategy, proposal development, and executive-level client presentations, • Provide senior design oversight on mechanical systems — HVAC, plumbing, piping, and controls, • Own project scope, schedule, and budget from kickoff through construction administration, • Oversee Revit 3D modeling, construction documents, and specifications, • Ensure compliance with applicable codes, standards, and regulatory requirements Required Qualifications • 4-year engineering degree from an accredited institution, • Professional Engineer (PE) license, or actively pursuing licensure, • Experience leading or managing a consulting engineering office or team, • Deep expertise in institutional mechanical systems — healthcare, education, or government preferred, • Demonstrated success in client management and business development, • Proficiency in Revit and Microsoft Office Suite, • Strong communication skills — able to represent the firm at the client and owner level Benefits and Compensation • Base salary: $150,000 – $220,000 depending on experience and licensure, • Performance incentives tied to business development and office profitability, • Medical, dental, and vision — 100% premium covered for the employee, • 401(k) with company match, • FSA and HSA options, • Short-term and long-term disability plus life insurance — 100% employer paid, • Parental leave and professional development support, • Relocation assistance available, • Flex schedule: 9-hour days Monday–Thursday, half-day Fridays, • Paid holidays, monthly firm activities, and employee longevity rewards program, • Referral and employee assistance programs Why Work With Us This is a rare opportunity to take real ownership of a market. You are not walking into a built-out office with a team already in place — you are building it. The firm has the reputation, the resources, and the project pipeline. They need someone with the vision and drive to plant a flag in Salt Lake City and grow it into something significant. If you have spent your career developing your craft and are ready to lead at a higher level, this is the right move.

Job DescriptionLocation: Salt Lake City, Utah (Relocation Required)Salary Range: $115,000 – $170,000, depending on experience and qualificationsA growing fire protection engineering consulting firm is looking for a Fire Protection Consultant to join its Salt Lake City office. This is a permanent, full-time role with strong growth potential and the chance to work on diverse and challenging projects across the U.S.Why Consider This Opportunity? Salt Lake City is known for its breathtaking mountain scenery, year-round outdoor activities, a vibrant urban scene, and a cost of living that’s more affordable than many large cities. Whether you're into skiing, hiking, or simply looking for more room to breathe, this role offers the best of both worlds: exceptional career opportunity and an outstanding quality of life. This company is known for its supportive culture, high standards of technical work, and steady project pipeline. You'll be part of a collaborative team that values innovation and provides the tools and mentorship to grow professionally. Key Responsibilities: • Provide fire protection and life safety consulting services across a range of facility types nationwide., • Perform fire sprinkler and alarm system design, life safety code analysis, and performance-based fire engineering., • Conduct plan reviews, site visits, and building/fire code evaluations., • Classify and document hazardous materials for regulatory compliance in industrial settings., • Assess high-piled storage configurations and prepare permitting documentation., • Develop fire protection strategies and code alternatives in collaboration with design teams., • Prepare and peer-review detailed technical reports and project documents., • Support client relationships and contribute to business development initiatives- experience in this area is welcomed but not requiredQualifications:, • Bachelor’s degree in Fire Protection, Mechanical, Electrical, Chemical, or Civil Engineering., • 3 to 10+ years of relevant experience in fire protection engineering, life safety, or code consulting., • EIT or PE designation preferred, or on track for licensure., • Strong communication skills, with the ability to interact professionally with clients, contractors, and authorities., • Capable of working independently and meeting deadlines in a consulting environment., • Previous project management experience is a plus.Software Proficiency:, • Microsoft Office Suite, • AutoCAD and BlueBeam, • Revit experience preferredAdditional Details:, • 401(k) plan with company match, • Competitive paid time off (PTO), • Flextime Fridays for improved work-life balance, • Comprehensive health insurance coverage with 100% of premiums paid by the company, • Biannual performance bonuses to reward outstanding contributions, • Education reimbursement, • Relocation allowance may be provided if necessary

Job Description Job Title: Product Design Engineer Region: Portland or Salt Lake City Department: Advanced Integration Reports to: Director of Design and Engineering, VP of Advanced Integration Position Overview The Product Design Engineer is responsible for the design and development of manufactured equipment for mission-critical facilities. This is an individual-contributor role focused on creating integrated, modular, and prefabricated equipment solutions. The Product Design Engineer works at the intersection of product design, manufacturing, and data center construction, ensuring that designs meet the technical requirements of data centers while being optimized for manufacturing and assembly. The primary focus of the role is designing technology products related to data center construction, such as hot aisle containment and other prefabricated systems. The role requires a working knowledge of data center functions, including structural, mechanical, electrical, and technology systems, or the ability to develop it, along with a commitment to delivering high-quality, well-coordinated designs. Key Responsibilities • Design new hot aisle containment solutions for data centers that is modular, prefabricated, and tailored to specific client needs., • Develop and refine manufactured equipment solutions for mission-critical environments, focusing on manufacturability and ease of integration., • Develop and maintain project plans and timelines for assigned products., • Collaborate with project management and other stakeholders to define product requirements and specifications., • Conduct research to identify new product opportunities and technology trends., • Ensure compliance with all relevant regulatory requirements and standards., • Participate in product testing and validation activities., • Develop and maintain strong relationships with suppliers, vendors, and partners., • Collaborate closely with the Engineering and Manufacturing departments to ensure designs are feasible, cost-effective, and aligned with production capabilities., • Incorporate knowledge of data center functionality, including structural frames, mechanical cooling system, electrical distribution (rackbus, tap boxes), and technology infrastructure., • Attend client meetings and refine design based on client requirements., • Validate design through prototype, pre-production and first-of-kind builds, conducting DFx and value engineering analysis through each step and updating design and documentation., • Produce comprehensive documentation of designs, including detailed product submittals and technical specifications., • Create and maintain 3D models for coordination with other trades and for use in presentation materials for clients and internal stakeholders., • Ensure all designs comply with industry standards and client-specific requirements for mission-critical facilities. Qualifications & Skills Required • Education: Bachelor's degree in Mechanical Engineering, Industrial Design, Product Design, or a related engineering field., • Experience: 5+ years of experience in product design, mechanical design, or product development engineering., • Industry Knowledge: Experience with data center construction and an understanding of data center functionality (structural, mechanical, electrical, and technology)., • Software Proficiency: Knowledge of Inventor, SolidWorks or other 3D design software. Knowledge of Revit or ability to learn. Knowledge of Microsoft Office products and Bluebeam Revu Preferred • Experience with, or working knowledge of, data center construction and functionality (structural, mechanical, electrical, and technology systems)., • Experience in the design and manufacturing of modular or prefabricated systems., • Familiarity with mission-critical infrastructure and the unique requirements of hyperscale data center clients., • Excellent project management skills, including the ability to develop and manage project plans, timelines, and budgets., • Strong communication skills for collaborating across engineering, manufacturing, and client teams. Work Environment & Travel This position is based in Portland or Salt Lake City. Occasional travel is required to visit jobsites, manufacturing facilities, and client locations to support project coordination and product deployment. Updated 6-5-26 Full compensation packages are based on candidate experience and certifications. Oregon pay range$90,000—$120,000 USDFull compensation packages are based on candidate experience and certifications. Utah pay range$90,000—$120,000 USD

Job Description Your Role: • Performing electrical power design for variety of projects to include but not limited to: buildings and facilities, including hospitals, laboratories, high rise residential, hotel and office, and other commercial and institutional projects., • Incorporating design changes using AutoCad and/or Revit software, • Performing service load calculations and short circuit studies, • Meeting project schedules and performing work with budgetary constraints, • Attend meetings with architects, owners and building managers to discuss future or current projects, • Reviewing submittals and providing responses to Requests for Information, • Conduct activities in line with internal procedures, legislation, and industry standards., • Pursue continuous professional development and maintain a high degree of discipline knowledge and awareness., • Work in a safe manner at all times and report all health and safety incidents and concerns., • Additional duties as required.

Job DescriptionMechanical Engineer (HVAC – Pharmaceutical Process Facilities) We are seeking a Registered Professional Mechanical Engineer with strong HVAC design experience in pharmaceutical drug manufacturing environments. This role will lead and support the design of HVAC and mechanical systems for regulated facilities, including cleanrooms, laboratories, process suites, utility areas, and supporting infrastructure. The ideal candidate brings a strong understanding of cGMP environments, contamination control, pressurization strategies, and multidisciplinary coordination across process, architecture, automation, and construction. The ideal candidate has a strong background in cleanroom environments, aseptic processing, contamination and control strategies, and regulatory compliance for pharmaceutical operations. Key Responsibilities Design and oversee HVAC systems supporting pharmaceutical manufacturing, laboratories, cleanrooms and process suites Development of mechanical engineering packages including: HVAC load calculations Airflow and pressurization strategies Ductwork and piping layouts Equipment Specifications Control’s and integration requirements Ensure compliance with: cGMP Requirements FDA regulations ISO cleanroom standards ASHRAE guidelines USP requirements where applicable Support facility expansions, renovations, and capital projects from concept through commissioning and qualification Lead or support commissioning, qualification, and validation activities Coordinate with process engineering, validation, quality assurance, automation and manufacturing teams Perform root cause investigations and implement corrective actions related to HVAC or environmental excursions Review contractor submittals, drawings, and engineering calculations Provide technical leadership for energy efficiency and reliability improvements Support audits, inspections, and regulatory reviews Required Qualifications Bachelor degree in Mechanical Engineering Active Professional Engineer (PE) registration/license required 10+ years of mechanical engineering experience in pharmaceutical, biotech, or life sciences facilities Demonstrated expertise with: Pharmaceutical HVAC systems Cleanroom Design Aseptic manufacturing support Environmental Control systems Building automation systems Experience supporting commissioning and qualification activities Proficiency with engineering design tools and autocad/REVIT preferred Excellent communication, technical writing, and project coordination skills Preferred Qualifications Experience with sterile injectable or biologis manufacturing facilities Knowledge of containment systems and hazardous drug handling environments LEED accreditation or energy management experience Familiarity with risk-based contamination control strategies

Job Description B.H. Inc., of Vernal, Utah, is searching for a full-time Civil or Structural Engineer (PE/EIT) to plan and design moderate to complex projects while working closely with the Engineering Team to facilitate the successful accomplishment of project goals and objectives. This position will be in either our North Salt Lake City or our Logan office. Are you an exceptional leader with experience in engineering? Are you looking for the right company to take your career to the next level? If so, please read on! We are willing to pay for the best candidate for this engineer role. If you have what we're looking for, your salary is highly negotiable and could exceed our range of $90,000 to $110,000. We also offer perks and benefits, including weekly pay, health, vision, dental, life insurance, a 401k plan with match, and liberal paid time off (PTO). If this sounds like the right career opportunity, consider joining our team today! QUALIFICATIONS FOR A CIVIL ENGINEER • Bachelor's or Master's Degree in a Civil Engineering discipline., • 2 to 5 years of related professional experience or other comparable experience, • Passing of Fundamentals of Engineering Exam and a desire to take and/or passing grate in the Professional Engineering Exam., • Knowledge of project management delivery process tools, • Experience designing in Revit and Civil 3D preferred. A degree in Engineering is required to be selected for this position. We are really looking for the best person for this position and want to see what's out there! Are you a problem-solver? Do you have excellent interpersonal skills? Are you self-motivated and able to motivate others? Are you goal-oriented and always looking for ways to improve? If so, you might just be perfect for this engineering project management position! ABOUT B.H. INC. (BHI) Brad Haslem of Vernal, UT, started BHI with six others in 1998. What began as a small electrical company is now a multi-faceted powerhouse that offers various construction services. Our services include instrumentation & electrical, civil & excavation, facilities & pipeline, construction management, wireless & communications, and engineering. We have offices in Salt Lake City, UT; Vernal, UT; Ogden, UT; Hobbs, NM; Rock Springs, WY; Dickinson, ND; Windsor, CO; Medicine Lodge, KS; and Midland, TX. BHI is recognized and respected nationwide in the industries we serve. We are a group of highly motivated, aggressive, goal-oriented individuals who love working as a team and growing our organization. We look at each other as family, not merely co-workers who punch the same clock. We firmly believe our core responsibility is to develop people and provide for families. We have a positive work environment here at BHI and offer excellent pay and generous benefits. A DAY IN THE LIFE OF A CIVIL OR STRUCTURAL ENGINEER (PE/EIT) As the Civil Engineer within our engineering division, you will work with a range of differing projects. You will pay attention to detail and be proficient in gathering project details and communicating project requirements with owners, sub-consultants, reviewing or permitting agencies, and construction teams. You play an essential part in performing engineering calculations, creating construction plans and details, following design codes and governmental regulations, and creating engineering models using engineering software. You will help to identify and address potential issues promptly. In addition, as a civil engineer, you will be responsible for a diverse range of tasks. These could include all disciplines of Civil Engineering (civil, structural, transportation, hydraulics, soils). Experience working with AutoCAD Civil 3D is highly preferred, as this software will be a minimum weekly, if not daily. In addition, experience with Revit, Risa 3D, Enercalc, Autodesk Storm & Sanitary Analysis, and other engineering software programs desirable. READY TO JOIN OUR TEAM? We understand your time is valuable, so we have a very quick and easy application process. If you feel you would be the right fit for this engineering position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. EEO, including disability and vets #INDSJ1 Job Posted by ApplicantPro

Job DescriptionElectrical EngineerWHO WE ARE:Jedson Engineering is an Engineering Consultancy headquartered in Cincinnati, OH. We provide full-service engineering, procurement and construction management (EPCm) services to industrial process manufacturers that operate in pulp & paper, chemical, CPG, F&B, power and heavy industrial market markets across the nation. We are in a significant growth mode and it’s an exciting time to be joining our business!WHAT YOU’LL BE DOING: This person will bring extensive experience to work on industrial projects including design of power distribution, lighting and grounding systems. Projects range from small facility modifications to complex EPC contracts for heavy industrial processes in any one or more of the pulp and paper, chemicals, food and beverage, consumer products, or pharmaceutical industries. Some travel to project and construction sites will be required.• Design power system facilities and equipment and coordinate construction, operation, and maintenance of electric power generating, receiving, and distribution stations, and distribution systems and equipment• Develop conceptual layouts and sketches to drive the most efficient design on a project-by-project basis• Participate in the planning, scheduling, conducting and coordinating detailed phases of electrical engineering projects• Develop equipment specifications• Develop construction specifications and contractor scope of work documents• Directs preparation of or prepares drawings and specific type of equipment and materials to be used, in construction and equipment installation• Inspects completed installations for conformance with design and equipment specifications and safety standards• Work products will include: one-line diagrams, wiring drawings, panel layout drawings, motor schematics, instrument loop sheets, conduit and tray routing drawings and contractor scope documents• Work with systems and equipment grounding requirements (high resistance, building and isolated grounding)• Provide on-site start up supportYOUR IDEAL BACKGROUND:The successful candidate should have an entrepreneurial spirit, and be excited by opportunities to add value to our clients with Jedson’s engineering expertise. Strong communication skills, collaboration and courage to challenge the status quo are cornerstones of the Jedson Edge. • experience with design/installation of medium and low-voltage distribution equipment, with experience in consulting engineering and construction industry• Strong knowledge of applicable codes and standards (NEC, ANSI, NEMA, NFPA) • Able to handle onsite plant projects with minimal supervision• Well organized with a demonstrated ability to meet deadlines and operate within budgets and work directly with client engineers and maintenance teams.• Working knowledge of Autodesk Revit.• Capability with CAD systems including AutoCAD• PE license or EIT certificate with ability to obtain PE license is preferred but not required.

Job Description Job Summary The Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to: Responsibilities • Designing electrical systems for building power, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities., • Documenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc., • Maintains project document organization, • Manage time and meet commitments, • Understands Ohms Law, AC/DC, Electric and magnetic fields, • Understands power system theory – 3-phase vector math, power factor, symmetrical components, • Understands capacitors, inductors, and resonance, • Designing lighting for food processing spaces, including lighting calculations for emergency and inspection lighting level needs. Coordinating fixture placement/mounting with other trades., • Designing fire alarm systems per NFPA 72, 101, and local building code., • Code expertise – NEC, NFPA 72/101/, IBC, • Specify means and methods, • Specify other common work – grounding, start-up, LV & MV Cables, • Specify equipment, • Designing low voltage systems such as LAN, phones, PA, Wi-Fi, access control, cameras, etc., • Create power plans, • Create power one line and panel schedules, • Define fire alarm requirements per IBC and NFPA 101, • Define Low Voltage Systems, • Review scope with client – create and manage needs list, • Producing bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications., • CAD – add 2D & 3D devices to Xrefs, • Procuring long lead light fixtures and power distribution equipment such as switchgear, switchboards, panelboards, transformers, MCC’s, generators, variable speed drives, and UPS’s., • Transformer configurations, • Perform short circuit calculations identifying deficiencies or series ratings, • Estimate weights of main tray/trapezes and equipment needing support, • Assist in managing electrical bid process for clients, observing construction, and assisting with startup., • Project planning and feasibility studies., • Actively participating in and supporting department-wide standard development, updates, and maintenance., • Researching electrical building/power materials and best practices, • Supporting talent growth within our organization Required Education Skills and Experience • Bachelor of Science in Electrical Engineering or related field, • 4-7 years of work experience in electrical systems for building power., • 4-7 years of work experience in designing lighting, fire alarm systems, and low voltage systems for building spaces, including lighting calculations, and coordinating fixture placement with trades., • 4-7 years of work experience in electrical bid documents and procuring electrical materials and equipment., • 4-7 years of work experience in AutoCAD, Revit or other related design programs., • Relevant work experience in a manufacturing or construction setting preferred., • PE tracked desirable., • Travel to customer project sites for fieldwork, review, audit, and meetings, estimated 25%. Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • Up to 25% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job DescriptionSalary: $80,000 + based on experience We are seeking a talented and experienced Interior Designer to join our dynamic team. The ideal candidate will have a strong background in high-end residential design, a keen eye for detail, and the ability to bring our clients' visions to life. This is a full-time position that offers the opportunity to work on some of the most prestigious residential projects in the industry. RESPONSIBILITIES • Collaborate with clients to understand their needs, preferences, and budget to develop personalized design concepts., • Create detailed design plans and drawings, sketches and renderings, mood boards, presentations, and material selections., • Manage all phases of the design process, from initial consultation to final installation., • Source and procure finishes, plumbing, appliances, furniture, lighting and accessories that align with the design vision and project budget., • Coordinate with vendors, architects, contractors, and other professionals to ensure seamless project execution., • Oversee project timelines, budgets, and deliverables to ensure projects are completed on time and within budget., • Stay current with industry trends, materials, and technologies to continuously bring fresh ideas and solutions to our clients. QUALIFICATIONS • Bachelor's degree in Interior Design or related field., • Minimum of 5 years of experience in high-end residential interior design; Hospitality background a plus., • Previous management skills preferred., • Previous pricing/procurement experience, • Strong portfolio showcasing a range of high-end residential projects., • Excellent communication, presentation, and interpersonal skills., • Ability to work independently as well as collaboratively in a team environment., • Strong organizational and project management skills., • Knowledge of the latest design trends, materials, and technologies. TECHNICAL SKILLS • AutoCAD, Revit and/or ArchiCAD ~ Ability to produce high quality drawings/drafting required., • InDesign and Photoshop, • Abode Creative Suites, • Microsoft Office Suite, including Excel, • Studio Web, • Asana COMPENSATION This is a full-time, salaried position. Compensation commensurate with experience. BENEFITS • WRJ covers 75% of the employees medical insurance premium and 50% of the employees dental and vision premiums, • 401k and profit-sharing plan, • Paid holidays, • 10 days of PTO, • Paid holiday closure during the week between Christmas and New Year's Day, • Purchasing: After 1 year of employment, employees can purchase items at the Firms cost, • Eligible for an annual bonus based on company profitability and your commitment to our core values CORE VALUES WRJ is committed to our core values. We recruit team members who also committed to these values. Our core values are: • Creating Beauty:We create visually compelling and stimulating design that inspires the soul. Quality, craftsmanship, harmony, natural materials and exceptional design, experience and service, are the DNA of who we are., • Passion For Knowledge: We enthusiastically encourage everyone on the WRJ team to further their knowledge and understanding of their respective areas of expertise. We seek out sources and travel the world in search of inspiration. Our team proactively and creatively solves problems and draws upon their own experience for the mutual benefit to ourselves and our clients., • Internal Compass: We are dedicated to individual initiative and creative thinking within a team framework that emphasizes professional respect and collaboration; always striving to go above and beyond to meet our goals. SUBMISSION REQUIREMENTS To apply for the position, submit your resume and cover letter to this posting. No phone inquiries please. WRJ is an equal opportunity employer committed to creating a diverse workforce. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, service member status, amnesty or status as a covered veteran, or any other protected classification under applicable federal, state, and local laws. This position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidates.

Job Description We have an incredible new opportunity available in Salt Lake City for Fire Protection professionals. Rockstar Recruiting has partnered with a leading employer in the area that truly takes care of their team. This is a company that has been serving the region for over 50 years and is not just another organization that throws around buzzwords or talks about how their employees are family — they back it up. This is a registered Employee Owned Company (ESOP) and this role comes with some excellent perks: • Profit Sharing, • PTO, • 2 Separate Retirement Plans, • ESOP (Employee Owned Company), • 401k With Matching, • Health Care Benefits - Dental, Health, Life, Vision, • Hourly Pay Range - $35.00 - $50.00/hour (Depending on Experience and Certification) We have an immediate opening for an experienced Fire Sprinkler Designer. This role will work closely with our team of project managers and engineers to develop complete fire sprinkler system layouts. The position will primarily involve working with AutoCAD or Revit software. We are looking for someone with experience designing fire sprinkler systems, ideally with NICET certifications. This role will involve performing hydraulic calculations, applying NFPA building codes, and supporting field crews when clarification on design details is needed. This position works alongside a strong and experienced team that collaborates closely on projects. You will never be left alone to figure things out — help is always available when needed. At the same time, you will not be micromanaged. We believe in hiring experienced professionals and giving them the autonomy to do their work. If you are an experienced Fire Sprinkler Designer in the Salt Lake City area, we want to hear from you. For candidates located outside the area who are interested in relocating, we absolutely encourage you to apply. Please note that due to the collaborative nature of this role, designers are required to work in-office, as this is not a remote position. Company DescriptionRockstar Recruiting is the most successful recruiting company in North America for Skilled Trades roles with a focus on Service Technician, Industrial Management, Sales, Mechanics, Auto Mechanics, Fire Protection, HVAC, Millwrights and Plumbing positions. We partner closely with candidates to ensure the right fit. We work hard to secure the best offer, with the best opportunities, helping skilled trades professionals advance in their careers.Rockstar Recruiting is the most successful recruiting company in North America for Skilled Trades roles with a focus on Industrial Management, Sales, Mechanics, Auto Mechanics, Fire Protection, HVAC, Millwrights and Plumbing positions. We partner closely with candidates to ensure the right fit. We work hard to secure the best offer, with the best opportunities, helping skilled trades professionals advance in their careers.

Job Description Job Summary The Mechanical Refrigeration Engineer will plan, design, and implement mechanical systems for industrial food and beverage production facilities, particularly industrial refrigeration systems for production facilities, cold storage warehouses, and product cooling. You will work on multi-disciplinary project teams and have an opportunity to perform, practice, and apply a wide range of mechanical refrigeration engineering knowledge from the system and facility design stage through the construction and commissioning stage of our projects. Typical responsibilities include: Responsibilities • May work independently or with other refrigeration engineers, depending on project size, • Developing refrigeration systems for cold storage, production, and product cooling, • Leading mechanical system design development and coordinating with other internal and external team members, • Developing refrigeration and related utility equipment and construction specifications, • Developing P&IDs, equipment layout plans, plant / process utility distribution plans, and system details, • Sizing and developing layouts for ammonia and glycol piping plans, • Specifying equipment, • Selecting equipment, • Bid review, • Cost estimating, • Development of the functional description, sequence of operation, details, and plans with electrical and controls engineers, • Creating project documents such as calculations, reports, and construction drawings and specifications, etc., • Performing construction administration in the form of submittal reviews, RFI responses, and field visits to verify construction scope is proceeding per the intent of the design, • Review and update design standards/details, • Building code familiarity, compliance & review, • Field support, discipline lead for commissioning activities and client main point of contact, • Researching refrigeration and utility materials and best practices, • Supporting talent growth within our organization, • Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience • Bachelor’s Degree in mechanical engineering or related field, • 4-7 years of demonstrated refrigeration and utilities experience; mechanical experience in food and beverage, pharmaceutical, or other sanitary environments is a plus, • 4-7 years of ammonia, freon, and industrial refrigeration system design experience, • 4-7 years of experience with equipment and components for HVAC/R systems (refrigerant/hydronic piping, valves, pumps, vessels, heat exchangers, chillers, compressors, condensers, fluid coolers, condensing units, evaporator coils)., • 4-7 year of experience working with computer operations for engineering design programs and computer aided drafting (AutoCAD, Revit, etc.), • Travel to customer project sites for review, audit, and meetings, estimated 10-25%, • Registered Professional Engineer (PE) is a plus, • Strong written and verbal communication skills, a team-oriented can-do attitude, and an ability to work and manage projects independently. Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift-up to 15 pounds at times. Travel Requirement • Up to 25%-30% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description Mechanical Engineer / Project Manager Salt Lake City, UT Direct Hire/ Permanent Placement $80k-$120k, Hybrid, Full Benefits, Bonuses, 401k match EPC STAFF works with Architectural, Engineering, and Construction Firms and MEP Consultants nationwide. ROLE/ RESPONSIBILITIES/ HIGHLY PREFERRED EXPERIENCE • Prepare mechanical system construction documents, • Technical design and quality control, mechanical system calculations, and layouts, • Production of construction documents, Construction administration, site visits, and shop drawing review, • Project Management, • Revit, AutoCAD, Trane Trace, • HVAC system, ductwork, and hydronic design, • BSME, BSAE, or similar with 3+ years’ experience, • EIT or PE (preferred)

Job DescriptionStructural Engineer WHO WE ARE:Jedson Engineering is an Engineering Consultancy headquartered in Cincinnati, OH. We provide full-service engineering, procurement and construction management (EPCm) services to industrial process manufacturers that operate in pulp & paper, chemical, CPG, F&B, power and heavy industrial market markets across the nation. We are in a significant growth mode and it’s an exciting time to be joining our business!WHAT YOU’LL BE DOING: This person will design structures that must endure stresses and pressures inflicted through human use and environmental conditions. The incumbent will design/configure structures, oversee drawing production, choose appropriate foundation, building and equipment support material, inspect the construction work and ensure the structural soundness of foundations, buildings and structures. • Prepare reports, design criteria, estimates, designs and drawings, • Make calculations about pressures, loads and stresses, • Provide technical advice on safe designs and construction, • Obtain planning and/or building regulations approval, • Liaise with clients and professional staff such as architects and engineers, • Monitor and inspect all work undertaken by contractors to ensure structural soundness, • Administer small sub-contracts and manage structural projects, • Inspect geotechnical properties to evaluate the conditions and foundations, • Use computer aided design technology for simulation purposesIDEAL BACKGROUND:The successful candidate should have an entrepreneurial spirit, and be excited by opportunities to add value to our clients with Jedson’s engineering expertise. Strong communication skills, collaboration and courage to challenge the status quo are cornerstones of the Jedson Edge., • Degree in Civil or Structural Engineering, • Licensed Professional Engineer preferred, • Experience in industrial structural engineering., • Experience in STAAD, AutoCAD and Revit, • Experience with steel, concrete and masonry, • Experience in heavy to light industrial projects, • Experience with rotating and vibration analysis, • Advanced knowledge of construction methods, materials and legal regulations, • Will need to be a good communicator and able to manage multiple projects and clients at a time

Job Description Electrical Engineer Salt Lake City, UT Direct Hire / Permanent Placement $80k – $120k Base Salary (Dependent on Experience), Full benefits, Flex/ Hybrid schedule, Bonus, Profit Sharing, etc. OVERVIEW The Electrical Engineer will be responsible for delivering quality electrical system design across a variety of market sectors, including commercial, healthcare, and higher education. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, and fire alarm per NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels, and emergency generators, • Site visits, presentations for clients/ design review, site Surveys, respond to RFIs, review shop drawings, • Revit, AutoCAD, SKM, AGI 32, MicroStation (a plus), • Degreed BSEE BSAE or equivalent, • 3+ years of Industry experience in the US, • EIT, PE, LEED Preferred (a plus)

Job DescriptionDescription: JOB PURPOSE: The Mechanical Designer 2 position will help provide comprehensive mechanical engineering services geared to cover all facets of the construction process, beginning with design initiation, through the commissioning of systems. This position will report to The Mechanical Department Manager and office Principal and serve as a key member of the Engineering team. At Energy 1, our passion is to Demand Better. We live by our core values and look for employees that love to learn new things, put the team first, are customer centric, show grit and relentless determination, and lead with inventive problem solving. DUTIES AND RESPONSIBILITIES: The Mechanical Designer 2 will possess strong abilities to work collaboratively with all members of the design team, assist and mentor new designers and effectively communicate with customers, contractors, and staff. They should be a self-starter, motivated, and able to work independently, and with others to establish priorities, meet deadlines, and respond to changing demands. Specific Job Duties: • Under the guidance of a mechanical engineer or experienced designer, develop and prepare detailed engineering and construction installation documents and provide engineering support during the construction phase of a wide range of project types including residential, commercial, industrial, institutional, and healthcare., • Perform drafting (Revit or AutoCAD) of mechanical and plumbing systems., • Design of mechanical and plumbing systems including, but not limited to, forced and hydronic systems, sanitary drainage, domestic water, and fuel gas piping systems., • Perform mechanical system design analysis including, but not limited to heating/cooling load calculations, plumbing load calculations, energy modeling, comparative system life-cycle cost modeling, and energy code compliance verification., • Coordinate with other disciplines to gather specific information required to provide complete designs., • Write/edit project specifications (CSI divisions 22 and 23)., • Produce complete, code compliant project contract documents including drawings and specifications to be used for permitting, bidding, and construction., • Perform construction administration including tasks such as field inspections and reports, submittal reviews, RFI responses, project closeouts, as-built documentation, and issuing design change directives., • Consult with Project Managers on business development activities, proposal preparation, project scopes and deadlines., • Teach Designer 1’s the basics of mechanical and plumbing systems design., • Additional duties as assigned.Requirements: QUALIFICATIONS: • Minimum 4 years of professional experience in mechanical and plumbing design., • Bachelor’s degree in mechanical engineering., • Experience in referencing and understanding applicable building codes and related industry standards (International Building Codes, IAPMO codes and standards, ASHRAE standards, etc.)., • Proficient with AutoCAD and/or Revit (preferred), Bluebeam Revu, and Microsoft products including Excel, Word, Outlook, and Power Point., • Preferred PE. KNOWLEDGE, SKILLS, AND ABILITIES: • Demonstrates excellent written and verbal communication skills., • Demonstrates the ability to thrive in a high demand and fast-paced environment., • Demonstrates a proactive, team orientated mindset with a high level of self and team accountability., • Is highly organized and exhibits a strong attention to details, record keeping, and follow-up., • Operates effectively with a diverse group of people internally and externally., • Demonstrates the ability to multitask, make quick decisions, and manage time efficiently., • Demonstrates critical thinking skills and the ability to manage complexity., • Demonstrates the ability to work independently, take initiative, and follow through on assignments. PHYSICAL REQUIREMENTS: • While performing the duties of this job, the employee is regularly required to: communicate with others both physically present and on the telephone; sit and stand; move, use hands to operate objects, tools, or controls; and reach with hands and arms. The employee is rarely required to climb, balance, stoop, kneel, crouch, or crawl. The employee must frequently lift and move objects up to 10 pounds and occasionally lift and move objects over 50 pounds. WORKING CONDITIONS: • The physical environment requires the employee to typically work in an office setting. This position will require occasional travel to project sites., • This is an in-person/in-office position located in Salt Lake City, UT and may be working on projects nationwide and with coworkers in remote locations., • This non-exempt hourly position may be requested to work overtime and weekends on occasion. Energy 1 provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. For Internal Use Only: ENG-DSG-ME

Job Description Job Summary Project Managers are Dennis Group’s primary client contact through the entire project delivery process, from design concept through bidding, construction, and start-up. As a Project Manager, your responsibility is to ensure each project’s scope, cost and schedule are successfully met. Our projects are designing and building food and beverage process facilities (industrial projects). The design/architect teams, engineering teams (multiple), and construction teams are housed within Dennis Group and the project manager is actively interacting with each group to ensure the success of the project. Project Manager’s mission is to provide project management and execution expertise for clients through the entire project life cycle. Project Managers also play a vital role in our client relationship management program. As such, having the requisite experience, skill set, and character to successfully support our sales and marketing activities is an essential aspect of the role. This role requires excellent leadership, organization, and time management skills as you will wear many hats at once. Those finding success in the role typically have a technical background - which they apply daily - and are professional, self-motivated, and energetic with excellent communication and inter-personal skills. Typical responsibilities include but not limited to: Responsibilities • Works autonomously on specific tasks, • Managing projects from planning through commissioning including developing key success criteria for each project and ensuring the success criteria are achieved, • Assisting with the development of project scope, budget, schedule, and critical path elements, • Develop RFI, • Prepare purchase/work authorization., • Maintain client SharePoint site, • Managing in-house and consulting design teamwork product, • Establishing design criteria; reviewing design and construction phase documents, • Managing permit, code and regulatory approvals, • Develop preliminary procurement plan (preparation of bid packages, bid tabulation, writing of purchase orders and subcontracts), • Assemble and evaluate potential project bidders, • Define kick-off meeting agenda, • Determine project definition deliverables, • Coordinate all project communication, • Develop project outline specifications, • Develop conceptual layout – understanding of facility personnel and materials flows, critical adjacencies, • Develop medium engineering services proposal, • Manage bid process fairly and professionally and review and approve bid packages, • Maintain “Outstanding Items Needs” list, • Maintain Project Meeting notes, • Develop and implement lessons learned for project, • Develop and issue monthly reports, • Determine project permitting needs, • Update project forecasting tool monthly, • Review and approve engineering deliverables, • Develop preliminary construction cost estimates – site and building, • Define project assumptions / exclusions, • Review and approve monthly supplier invoices and client billing, • Develop and maintain submittal and RFI processes, • Develop preliminary PM/Eng/CM/Start-up support cost estimate, • Facilitate and manage food safety risk assessments, • Organizing construction trades and administering subcontracts, • Managing project budget and expense approvals, • Managing contract and change order administration, • Overseeing equipment installations, • Providing on-site supervision and coordinate design team on-site support activities, • Facilitate project interactive planning sessions, • Refine and update budget forecast, • Finalize procurement plan, • Managing project punch-list inspection, • Assembling and maintaining complete project records and close-out documents, • Facilitate and manage client and 3rd party design reviews, • Interfacing with client, working in client facilities and construction sites., • Utilize multiple software programs (MS Office, CAD, Navisworks, MS Project, SharePoint, etc.), • Researching project management best practices, • Supporting talent growth within our organization Required Education Skills and Experience • Degree in Construction Management / Architecture / Engineering, • 4+ years of experience within a design-build, General Contractor company working with multiple in-house engineer disciplines, architects, designers, etc., • 4+ years of experience with MEP industrial construction projects, preferably food and beverage or pharmaceutical projects., • 4+ years of experience with Building construction, Project scheduling, Construction estimating, and Construction Safety., • 4+ years as a Project Manager with proven track record of successful project management and demonstrated success delivering numerous projects delivered on time, meeting requirements, with high team satisfaction., • Basic understanding of AutoCAD, Revit, Navisworks, and other design software, • Familiarity with sanitary environments is a plus, • Attention to detail, accuracy and deadlines, • Must meet overnight travel requirement of not less than 50% (overnight travel of 70-120 nights out of town annually) of any given time of the year, • Our projects are located throughout the United States and Canada, and this is a position that you will need to work collaboratively with owners, A/E teams, subs, building officials, etc. regularly at the client’s facilities and construction sites. Overnight travel requirement will be not less than 50% of any given time of the year., • Excellent analytical, organizational, interpersonal and communication skills Physical Requirements • Prolonged periods sitting at a desk and working on a computer., • At times, standing and walking the jobsite over rough terrain can be expected, • Must be able to lift-up to 15 pounds at times. Travel Requirement • Our projects are located throughout the United States and Canada, and this is a position that you will need to work collaboratively with owners, A/E teams, subs, building officials, etc. regularly at the client’s facilities and construction sites. Overnight travel requirement will be not less than 50% of any given time of the year. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.

Job Description EELD llc is seeking a motivated individual to join our team. Using Revit and AutoCAD, one must create electrical construction drawings for buildings under the direction of an electrical engineer. Drawings will be utilized for the construction of office, education, commercial, and recreation centers; must coordinate with architects, engineers, and contractors to create well-planned electrical drawings. Compensation will be proportionate with the applicant’s experience and skill level. EELD llc is an electrical engineering and lighting design firm. We work with architects to design electrical, lighting and fire alarm systems for different types of buildings. 1. Revit and AutoCAD experience required., 2. High attention to detail and produce results; ability to work in a team environment., 3. Able to work with limited supervision, yet able to follow directions with ability and willingness to learn., 4. Results oriented while maintaining attention to detail., 5. Ability to meet deadlines. Please send resume to info@ee-ld.com For company information visit http://www.ee-ld.com/

Job Description Architect II Overview VCBO Architecture is seeking an Architect II to contribute to the design and delivery of architectural projects within a collaborative studio environment. This role is based in our Utah office and is ideal for a mid-level professional with a strong foundation in design, documentation, and coordination within a collaborative team environment. You’ll work with growing independence, contribute to project outcomes across multiple phases, and support both design quality and team performance. About VCBO VCBO is an award-winning, integrated design firm headquartered in Utah with a team of over 130 professionals and projects across the globe. Our work spans Civic and Recreation, Healthcare, Higher Education, Hospitality, and K-12 Education sectors, with a focus on delivering functional, sustainable, and forward-thinking design solutions. We value mentorship, professional growth, and a collaborative studio culture where people are respected, supported, and enjoy working together. Key Responsibilities • Contribute to design, documentation, and coordination across multiple project phases, • Prepare drawings and models for schematic design, design development, and construction documentation, • Apply knowledge of building systems, codes, and construction methods in project work, • Coordinate with internal team members and consultants on defined project components, • Support the preparation of client presentations, including graphics, renderings, and diagrams, • Assist in construction administration tasks, including RFIs, submittals, and addenda, • Maintain quality, organization, and consistency in deliverables, • Provide guidance and support to junior staff Qualifications • Bachelor’s or Master’s degree in Architecture or related field, • Typically 4–8 years of professional experience, • Licensed Architect or actively pursuing licensure preferred, but not required, • Proficiency in Revit; familiarity with additional design tools (SketchUp, Rhino, Adobe Creative Suite) a plus, • Working knowledge of building codes, construction documentation, and coordination practices, • Strong communication, organization, and problem-solving skills, • Ability to work both independently and collaboratively