Trabajos safety engineer en White Plains, New YorkCrear alertas

Sr Engineer II, Electrical BOP \n \n We are seeking an experienced Power Systems Engineer with deep expertise in short circuit analysis and arc flash studies. The ideal candidate will hold a Professional Engineer (PE) license (not required) and have a proven track record of conducting and approving these studies, and demonstrate thorough knowledge of all relevant codes and standards governing arc flash safety. \n \n Role Responsibilities: \n\n • Perform and review short circuit studies and arc flash hazard analyses for electrical systems\n, • Approve study reports\n, • Recommend mitigation strategies to reduce incident energy levels\n, • Prepare technical documentation, including one-line diagrams, protective device coordination, and arc flash labeling\n, • Develop and maintain accurate electrical system models using ETAP\n, • Collaborate with project teams and clients to gather system data and validate inputs\n, • Provide training and mentorship on electrical safety and power system analysis\n, • Provide technical support for NERC standards (i.e., PRC-019, PRC-024, etc) and, where possible, conduct studies to meet NERC compliance\n, • Collaborate with internal stakeholders to streamline processes, procedures, and methodologies associated with power system studies\n, • Ensure compliance with all relevant codes and standards, including:\n, • NFPA 70E – Electrical Safety in the Workplace\n, • IEEE 1584 – Arc-Flash Hazard Calculations\n, • OSHA 29 CFR 1910 – Electrical Safety Regulations\n, • NEC (NFPA 70) – National Electrical Code\n, • NESC – National Electrical Safety Code\n, • Travel to sites 20-25% of the time\n\n \n Job Requirements and Experiences: \n\n • A Master's or Bachelor's of Science in Electrical Engineering, Engineering, or Physics\n, • A Professional Engineer (PE) is highly preferred\n, • A minimum of 7 years in power systems engineering with a focus on short circuit and arc flash studies\n, • A minimum of 7 years of professional experience with operating and analyzing high-voltage power systems equipment\n, • A minimum of 7 years of professional experience applicable to electric power generation, generation management, and automatic generation control\n, • Detailed knowledge of power generation and distribution equipment, transformers, switchgear, transmission feeders, substations, and renewable energy\n, • Knowledge of Codes and Standards: NFPA 70E, IEEE 1584, NEC, NESC, OSHA regulations\n, • Strong understanding of protective device coordination and relay settings\n, • Familiarity with the North American Electrical Reliability Corporation (NERC) standards\n, • Familiarity with industry modeling software such as PSSE, PSLF, PSCAD, TSAT, and ETAP (a plus)\n, • Ability and willingness to travel to and from job sites as assigned\n, • Strong interpersonal skills, with the ability to manage customer relationships\n, • Demonstrated desire to learn about the Company and the renewables space\n, • Excellent proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook) and Teams\n, • Strong leadership and communication, and the ability to meet deadlines\n, • Strong organizational skills and ability to coordinate multiple tasks and deliverables\n, • Ability to multitask, while working independently and as part of a team\n, • Motivated self-starter, goal-oriented, and strong problem-solving abilities\n, • Proven ability to empathize, build relationships, and effectively communicate with people from a diverse set of backgrounds\n, • Responds well to direction, is easy to challenge and develop, and is coachable\n, • Is detail-oriented, has strong business acumen, and a sound understanding of business concepts\n\n

Senior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) \n Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. \n \n This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. \n \n Responsibilities: \n\n • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies.\n, • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus\n, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs\n, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field\n, • Represent the company in project meetings as needed\n, • Collaborate with all design staff and oversee full cycle electrical design activities\n, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process\n, • Execute and lead design teams and design projects of complex scope\n, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment\n, • Utilize AutoCAD and Revit software to prepare drawings\n, • Review and / or prepare book or sheet specifications for electrical systems\n, • Develop and / or review sequences of operations\n, • Assist in proposal development including project scope, schedule and budget\n, • Effective management of project design team including resource forecasting and coordination\n, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines\n, • Support contact for design clients and builds effective, long-term client relationships\n, • May direct / coordinate interns / other engineering and technical staff\n, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support\n, • Collect data and other information for construction documents\n, • Prepare project design and construction documents\n, • Review and complete punch lists and project closeout documents\n, • Prepare project progress reports for internal and external stakeholders\n, • Update and maintain shop drawing and RFI log\n\n \n Qualifications: \n\n • 8-15 years experience\n, • Experience working for MEP firms, an A/E firm\n, • Bachelor's Degree in Electrical Engineering or similar engineering degree\n, • Licensed PE / EIT a Plus\n, • Experience with the design process of building systems for data center and mission critical projects\n, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems\n, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes\n, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations\n, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus\n, • Experience working on data center /data center / mission critical projects\n, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc.\n, • Experience working on complex data center/mission critical facilities design projects a must\n, • Proficient in design and calculation software\n, • MS Office: Excel, Word, Project, PowerPoint, Teams\n, • SKM Powertools, EDSA or ETAP experience is desirable\n, • Exceptional organizational skills for file management\n, • Skilled with various electrical topologies and distribution systems\n, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements\n, • Ability to successfully work independently\n, • Self Starter, self motivated, and should prioritize well\n, • Effective Communicator – emails, phone and face to face\n, • Complete assignments accurately and with attention to detail\n, • Analyze and prepare documents, reports and correspondence\n, • Communicate effectively directly with clients and at times serve as primary point of client contact\n, • Ability to work under pressure and meet close deadlines\n, • Ability to effectively plan and delegate the work of others\n, • Organizational skills, with the ability to manage multiple tasks simultaneously\n, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.)\n\n \n Submittal Instructions: \n Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xecygz66zc6wx6iraifwhhi5ha@crelate.net \n \n After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ \n \n If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! \n \n Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan \n EOE/AA Employer M/F/D/V \n Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Lead Electrical Engineer \n \n Our client is a fast-growing medical robotics company based in Westchester County, NY, building next-generation electro-mechanical systems that automate high-precision processes in clinical diagnostics. ISO-certified and backed by a seasoned team of engineers, scientists, and healthcare innovators, they are redefining what's possible in automated medical device technology — and they're just getting started. \n \n The Opportunity: \n A rare chance to own electrical architecture end-to-end on FDA-regulated devices that are already in market and scaling. You'll be a senior technical voice across hardware, embedded systems, and cross-functional integration — taking designs from concept to production in a company where engineering decisions genuinely move the needle. \n \n Key Responsibilities: \n\n • Lead the design, development, and validation of electrical systems for complex electromechanical medical devices\n, • Own PCB design and review — schematic capture, component selection, layout oversight, and design for manufacturability (DFM)\n, • Design and document wiring diagrams, cable assemblies, and electrical harnesses\n, • Develop power distribution, control systems, and signal integrity solutions\n, • Collaborate with mechanical, software, firmware, manufacturing, and quality teams to ensure seamless system integration\n, • Support embedded hardware development and interface with firmware/software on requirements and debugging\n, • Drive electrical design through prototyping, testing, verification, and production release\n, • Troubleshoot and resolve electrical issues at the system, board, and component levels\n, • Author and maintain technical documentation including schematics, test plans, reports, and DHF artifacts\n, • Ensure designs comply with applicable safety, EMC, and regulatory standards for medical devices\n, • Mentor and provide technical guidance to junior electrical engineers\n, • Support supplier selection, vendor communication, and external design reviews\n\n \n Qualifications-What You Bring: \n\n • BS in Electrical Engineering or equivalent technical discipline; advanced degree a plus\n, • 7+ years building hardware for sophisticated electromechanical systems\n, • Deep fluency in both analog and digital circuit design\n, • Hands-on PCB design experience — you know what good layout looks like and can defend your choices in review\n, • Track record of bringing electrical designs through prototyping, verification, and into production\n, • Solid instincts for signal integrity, motor control, and low-noise power design\n, • Experience working within regulated development environments with formal documentation requirements\n, • A collaborator who can translate between hardware and software teams without losing anything in translation\n, • Experience leading projects and working with a team of EE’s to deliver projects timely\n\n

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. ORGANIZATIONAL RELATIONSHIPS Closely work with together with the BIM Manager and system’s design engineers to provide 3D design aid throughout the project’s life cycle. Reports to Enterprise Systems engineering manager. SCOPE OF RESPONSIBILITY The Engineer is responsible for working closely with the BIM Manager and Systems Engineer to create a 3D model of the integrated security systems design submittal for approval by the customer or representative and in accordance with project specifications, drawings, codes, and regulations, manage and create the design submittal (drawings, bill of material, calculations, as-builts, etc.) and maintain the submittal during changes to the contract. Work within Security Technology systems group on the design and integration of security systems, access control, intrusion detection systems, communication, CCTV, Intercom systems, computer, and networking. Develop detailed design schematic and review 2D and 3D drawings for electronic and electrical products. This position will require working closely with project managers, design engineers, engineering specialists, manufactures, customers, engineering firms and other external experts. This position will require working in the Elmsford-NY office or the Fair Lawn-NJ office. Travel if might needed is less than 10% of the time. Job Requirements: ESSENTIAL FUNCTIONS • Basic working knowledge of Electronic Security Systems and features., • Creating Detailed 3D Models utilizing Revit, AutoCAD, and Navisworks to develop detailed 3D models of architectural designs., • Work closely with Design Engineers, architects, and other team members., • Updating and Modifying Models. As plans and specifications change, update and modify existing models accordingly., • Generating 2D Drawings and Details. Extract 2D drawings and construction details from 3D models., • Clash Detection and Coordination. Run clash detection analyses to identify conflicts or discrepancies between different building elements., • Attend Regular Project clash detection meetings and be prepared with clash reports to facilitate coordination meetings among project stakeholders., • Adherence to BIM Standards. Ensure that all models comply with project-specific BIM standards and protocols., • Maintaining BIM Libraries. Create and update BIM families within the project’s library., • Contributing to BIM Standards Development and actively participate in enhancing BIM standards and best practices within the organization., • Ability to handle multiple projects, schedule work and communicate effectively to peers. ADDITIONAL RESPONSIBILITIES • Be prompt, reliable, and on time in all aspects of your engagement while maintaining a high level of attention to detail and accuracy., • Perform any additional duties as required or assigned. SPECIAL KNOWLEDGE, SKILLS, AND ABILITIES • Security engineering experience is preferred but not a must., • BS in EE Engineering or equivalent is required., • Computer skills to include Revit, AutoCAD, Navisworks and MS Office., • Knowledge of ISO 19650 standards, • AC and DC circuitry, voltage drop calculations and wire sizing., • Basic knowledge of network and system security principles, not only in theory., • Executing enterprise engineering techniques., • Proven experience managing workload and pressure situations. Securitas offers comprehensive benefits including: • Company training and industry leading certification program, • Opportunity for annual merit pay increases, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. POSITION SUMMARY As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, and general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. ORGANIZATIONAL RELATIONSHIPS • Interface with Account Mangers, Support Services, Implementation Coordinators, Project Managers and Proposal Support Department on a regular basis., • Interface with Customers, Manufacturer’s Representatives, Manufacturer’s Technical staff, Distribution Suppliers and Supply Vendors on a regular basis., • Interface with area and senior leadership to develop a win strategy and evaluate the dynamics of projects., • Work with fellow application engineers providing guidance and or design aid in projects and products that are unfamiliar to them. SCOPE OF RESPONSIBILITY • Develop project requirements from interviews, customer provided scope of work, site surveys, specification, pricing sheets and drawing reviews., • Develop and provide detailed equipment list, electrical requirements, installation requirements and costing for turn-key security system solutions., • Configure and quote proprietary Pre Fabrication of applicable access control, CCTV and other systems ESSENTIAL FUNCTIONS • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards., • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor, • Review of Field Site Survey documents and drawings., • Supports the RFI, RFP, RFQ and RFM&S process as needed, • Create estimates and budgets for access control, intrusion, cctv, intercom, PSIM, PLC and structured cabling systems, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings., • Interpret specifications, addendums, revisions, sketches and Scope of work., • Work with project managers and design engineers for creating change orders on existing and ongoing projects., • Manage assigned projects and maintain deadlines for each project., • Build and maintain a good relationship with coworkers, suppliers and manufacturers., • Create a detailed list of clarifications, exclusions & compliance on a per project basis, • Knowledge of construction schedules, project meetings and how they pertain and impact the project., • Able to research product information utilizing the internet, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to assemble all cost aspects of a project, • Ability to recognize strategic and competitive issues, • Ability to challenge labor bids from subs for various labor categories including IBEW, • Ability to navigate high value job environment for timelines, and compliance requirements, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements ADDITIONAL RESPONSIBILITIES • Be prompt, reliable, and on time in all aspects of your engagement while maintaining a high level of attention to detail and accuracy., • Perform any additional duties as required or assigned SPECIAL KNOWLEDGE, SKILLS AND ABILITIES • Experience 5-7 Years, • Education BA Business/ BS Engineering/MS Engineering, • Applicable amount of experience in the appropriate field may be substituted for the educational background, • Thorough understanding of electronic security systems, their individual parts, and the onsite labor necessary to complete an installation., • Ability to read and understand written specifications, drawings and controlling documents., • Computer skills to include:, • MS Office, • Acrobat, • Visio, • DWG Writer, • Big Machines, • Sales Force dot com, • Good communications kills, • Ability to procure subcontractor pricing, • Ability to level bids from multiple subcontractors, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to assemble all cost aspects of a project, • Ability to recognize strategic and competitive issues, • Ability to challenge labor bids from subs for various labor categories including IBEW, • Ability to navigate high value job environment for timelines, and compliance requirements, • Ability to assemble all cost aspects of a project, • Ability to recognize strategic and competitive issues, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Securitas Technology, a global leader in integrated security solutions, is dedicated to helping make the world a safer place. With over 13,000 employees in 40 countries, we protect and empower businesses through a connected ecosystem of health, safety, and security solutions. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. We’re seeking a Technology Solutions Architect (TSA) to join our Engineering Center of Excellence. This role supports our sales Organization by developing repeatable, cutting-edge electronic security solutions tailored to client needs. Collaborating closely with sales leadership, the TSA plays a key role in shaping strategy, design, and technology support across regional and national teams. Primary responsibilities include: • Providing subject matter expertise to drive customer discussion on electronic security solution offerings, • Assist in coordinating communications and activities between the sales teams, local & regional field resources and the pre/post-sales engineering department, • Act as and be the systems integrations and field applications expert for the sales organization, • Directs and acts as a technology mentor for sales, costing, engineering, and field implementation, • Perform customer consultations, presentations, and demonstrations of identified technologies that fit the need for the customer’s solution, • Assist in Securitas events, and external tradeshow, such as, but not limited to GSX, ISC, NRF, RILA, and more Additional responsibilities include: • Conduct detailed field surveys for use in the design development and estimating of a customer’s solution, • Value engineer solutions to meet customer needs and support the sales operations teams to win, • Support costing & estimating engineers by developing, providing, and collaborating on bill of materials, scope of work, presales device placement drawings and subcontractor collaboration, • Assists in the preparation of sales proposals by providing pertinent technical information and reviews proposals for technical accuracy and adherence to product standards, • Advises and interacts with product management regarding product defects and provides customer input on suggested product improvements, • Support the field teams by selecting standard technology across installations. Where necessary, this includes supporting field installations with understanding of design and solution, • Provide insight and assist in the process of creating advanced plans when customers are migrating or implementing new technology. This includes technology selection, and project planning, • Support sales with technology related questions or scope. Help them understand what solution and strategy is required to accomplish a job, specification requirement and to win. This includes attending meetings, walk throughs and scope reviews Qualification and Education • 6+ Years’ experience in Electronic Security, • 5+ Years’ experience in designing Electronic Security systems (Intrusion Detection Systems (IDS), Access Control Systems (ACS), CCTV/ VMS (Video Management System, Visitor Management Systems, Intercom Systems), • Bachelor's Degree, or equivalent education and/or experience, • A valid state driver’s license, without restrictions, • Detailed knowledge of integrated electronic security solutions and design, • Some knowledge of Fire Alarm & Life Safety Code, • Working knowledge of Computer Systems & Networking, • Ability to read & interpret electronic security specifications, perform equipment counts (take off’s). Identify cable requirements & distances, as well as calculate power load & battery calculations., • Clear, professional communicator with the ability to engage effectively with internal teams and clients, • Self-motivated, detail-oriented, and deadline-driven Preferred Skills • Consultative sales process experience preferred, • Field Applications experience preferred, • Systems Integration experience preferred, • Physical Security Information Management (PSIM) and Global Security Operations Centers (GSOC) experience preferred, • Bluebeam and Visio experience preferred, • Knowledge of high security credentials such as iClass/DESFire & Personal Identity Verification (PIV/FICAM)., • Understanding / Certification with UL (681 & 2050) & High Security applications/systems., • Knowledge of Structured cabling / BICSI Certification / EIA/TIA-568., • Understanding of NFPA (National Fire Protection Association) code (Specifically in your assigned area) / NICET Certified. Additional Notes • Travel expected to be about 50% Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Salary: $70,000 to $75,000 Other Forms of Compensation: Annual bonus Pay Grade: 12 Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at www.Crothall.com. Job Summary Job Summary: Working as the Laundry Production Manager, you are responsible for assisting with the daily operations of an industrial laundry facility in the processing and delivery of healthcare linens. Key Responsibilities: • Manages the development and training of the staff in efficiently producing a high quality linen product, • Assists the Operations Manager with the financial management of the costs and expenses in the operation of the plant, • Assists in assuring the cost effective operation of the plant, while maintaining a safe work environment for the staff., • Acts as a liaison with the Chief Engineer/Engineering Manager to assure the safe operation and upkeep of all production equipment, • Assists Office Manager to insure all human resource issues such as training, regulatory compliance, staffing, payroll and benefit administrations for the entire staff is scheduled and completed within policy requirements, • Participates in the plant safety committee and oversees the regulatory compliance for all required agencies; knowledge of HLAC, OSHA and JACHAO requirements, • Attends, participates, and documents laundry surveys for potential clients, • Assists the Operations Manager with annual performance appraisals of staff as well as disciplinary/coaching for improvement procedures, • Assists the Operations Manager in forecasting for capital requests/expenditures; helps to manage the installation and operation of all new equipment; assists the Chief Engineer/Engineering Manager in reviewing new equipment and productivity improvement issues, • Develops action plans and Personal Development Plans (PDP) for current supervisory team, assuring their growth and success; must be able to develop a succession plan for his/her position so as the business grows there is a successful development of our corporate culture when new and additional job opportunities present themselves Preferred Qualifications: • BS/BA in Management or equivalent work experience preferred, • A minimum of 1 to 3 years operations/management experience - preferably laundry operations with large-scale plants in management or commercial field required, • Spanish language skills a plus, • Ability to communicate effectively in written format and oral presentations, • Ability to multi-task and establish priorities, • Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyCrothall.pdf Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1573024 Crothall Healthcare DANIEL J LAEMMLE [[req_classification]]

Job Description Job Title: Assistant Project Manager 1 Who we are: Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region’s largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit www.callahan-inc.com for more information. Summary/Objective: The Assistant Project Manager (APM 1) will serve as a vital team member assisting the Senior Project Manager/Project Manager on the full scope of the project. The APM 1 will be responsible for Document Control & Procurement Management, Communication, Cost Management, Subcontractor Coordination and Project Reporting while representing Callahan Construction Managers throughout the full project cycle. The APM 1 will also have oversight in managing the Project Administrators on task completion. The APM must exhibit time management skills and prioritize their work based on the daily needs of the project. Essential Functions: Safety -Coordination of Safety Program compliance in conjunction with the Superintendent -Shadow Safety Inspectors on site visits -Conduct 4 (minimum) independent safety inspections per month -Assist / Participate in all safety related activities and always promote a safety culture Document Control & Procurement Management -Understand the Plans, Specifications and Contracts of the project -Review of shop drawings and samples for compliance with contract documents -Coordination of meetings with Owners / Architect / Engineer and producing quality meeting minutes and meeting package content all in a timely manner -Manage all RFIs and Submittals utilizing Viewpoint with consultants, subcontractors, and field staff -Manage updates of the current construction document set utilizing Procore -Distribute information to subcontractors/suppliers -Reviewing and tracking material deliveries as scheduled and expediting in conjunction with the Project Superintendent to ensure on-time procurement Communication -Develop and maintain positive relationships with the Owner, Subcontractors and Project Team -Coordinate and communicate updates and changes to the schedule of the project. -Control the prompt flow of information to field team, subcontractors, and suppliers Cost Management -Participate in subcontractor buyout and subcontract issuance -Compile all changes in the project. Vet pricing on all change requests and submit proposals with time extensions as needed; Reviewing with Project Manager prior to submission. -Proficient in project accounting processes to ensure prompt payments of requisitions & Invoices -Review of monthly Subcontractor requisition and material invoices with your manager -Compile field tickets from Superintendent and attach to all material invoices processed Project Management and Reporting -Distribute Punchlist for execution -Participate in the monthly schedule update meeting -Preparing and submitting of the “Monthly Report” to the project team with guidance from your manager and Superintendent -Preparation of Quarterly cost meetings -Competing the Closeout of the project with the Owner and Subcontractors -Compile permit closeout and turnover documents -Maintain all records and files -Operations and Maintenance Manuals -Financial Closeout with PM and Accounting People Management -Oversee the Project Administrator tasks which include compliance log, subcontractor insurance, subcontractor change proposal tracking, subcontractor change order execution, EEO/MBE/WBE Required education and experience: -Bachelor’s Degree (Preferably Engineering, Construction Management or Architecture) -0-5 Years experience -Prior experience in construction settings All qualified applicants will be afforded equal opportunity. There shall be no discrimination based on race, color religion, sex, sexual orientation, gender identity, national original or on an applicant’s status as a protected veteran or as individual with a disability.

Job Description JOB TITLE: Assistant Project Manager (MNR) AGENCY: Construction & Development DEPT/DIV: Delivery/MNR REPORTS TO: Project Manager WORK LOCATION: 525 North Broadway HOURS OF WORK: 8:30 AM to 5:00 PM or as required (7.5HR/DAY) JOB FAMILY: CON GRADE: 002 SALARY RANGE: $84,893 to $106,117 DEADLINE: Open Until Filled May need to work outside of normal work hours (i.e., evenings and weekends) Travel may be required to other MTA locations or other external sites. MTA Construction & Development reserves the right to remove this posting before the application deadline. Agency Mission MTA Construction & Development (C&D) is responsible for the planning, development, and execution of all capital construction projects across the MTA region. Through centralized oversight and management of the MTA’s $64 billion Capital Program, C&D ensures the efficient delivery of critical infrastructure projects that support the region’s vast transportation network. As part of the Metropolitan Transportation Authority, the largest transportation network in North America, C&D plays a key role in modernizing and expanding services that support 15.3 million residents across New York City, Long Island, southeastern New York State, and Connecticut. C&D is committed to delivering safe, innovative, and cost-effective capital projects that enhance the customer experience and strengthen the reliability and resilience of the MTA system. Telework This position is eligible for telework, which is currently one day per week. New hires are eligible to apply 30 days after their effective date of hire. Job Summary The Assistant Project Manager manages capital project delivery within the MNR business unit in the MTA Construction Development (C&D) Delivery Department. This position is part of the project management team responsible for ensuring that project delivery is safe, efficient, on schedule, within budget, and according to project documents, contractual requirements, and relevant policies, procedures, standards, and guidelines. The Assistant Project Manager monitors project status and identifies project risks and issues. This position assists the Project Manager with management, coordination, field oversight, and inspection of capital projects. This position coordinates daily project delivery activities with C&D staff, contractors, consultants, and agency forces to support the safe and efficient execution of capital projects. Responsibilities The Assistant Project Manager is responsible for successfully managing and mentoring staff to deliver complex capital projects. Coordinate project activities through project close-out. Monitor project performance against established baselines and pursue opportunities for improved performance. Identify project issues and risks and ensure timely resolution and mitigation. Recommend solutions to senior management for the resolution of critical issues. Manage project activities to minimize the impact on agency operations and the public. Coordinate project activities with the project team, C&D staff, contractors, consultants, MTA operating agency staff, and other stakeholders. Coordinate with MTA operating agency staff to ensure necessary actions, approvals, and resources are in place to support project delivery. Ensure project activities follow established requirements and adhere to all relevant standards, guidelines, codes, regulations, policies, and procedures. Ensure that safety and quality are an integral part of project operations. Manage the preparation and monitor implementation of project plans, quality plans, and work plans. Coordinate with Safety and Quality Management staff. Manage project documentation to ensure quality, completeness, and accuracy. Manage and monitor progress against project scope, schedule, and budget. Work collaboratively with Development and Contracts throughout the project life-cycle, including developing project scope, requirements, design criteria, and procurement packages, evaluating bids/proposals, negotiating change orders, and timely completing the contractor/consultant evaluation process. Review and approve contract invoices and other project charges based on established procedures. Ensure that expenditures are correctly charged. Manage comprehensive project document control and retention. Manage the preparation of reports, presentations, research, and studies. Manage the presentation of project reporting and coordination of audit/inquiry responses for MTA and external oversight bodies. Manage staff selection, coaching, training, development, evaluation, and discipline/termination as needed. Create a professional environment that respects individual differences and enables all employees to develop and contribute to their full potential. Education and Experience Bachelor's degree in Engineering, Architecture, Construction or Project Management, Business Administration, Transportation, or a related field. Must have a minimum of (3) years of related experience. A Fundamentals of Engineering (FE) / Engineer-In-Training (EIT) certificate is desirable. A licensed Professional Engineer (PE) or Registered Architect (RA) is desirable. PMP and CCM Certifications are preferred. Excellent communication and interpersonal skills. Proficient computer skills (i.e., Windows environment, Microsoft Office, PeopleSoft, Oracle, etc.) and strong business administrative skills (i.e., presentations, report and letter writing, time management, etc.). Comprehensive Benefits & Total Rewards Package: Transportation & Financial Benefits Commuting Made Easy – Enjoy a complimentary MTA transportation pass, plus access to tax-advantaged commuter benefits to maximize your savings. Premium Health Coverage at Low Cost – Access high-quality individual, family, and domestic partner healthcare, dental, vision, and life insurance plans. Secure Your Future – Build long-term financial security through pension plans and retirement savings accounts designed for eligible employees. Time Off & Work-Life Balance Generous Time Away – Recharge with substantial paid time off and comprehensive holiday schedules that support your personal and family commitments. Holistic Support Services – Access our dedicated Work Life Services team and Office of the Chaplains unit for personal guidance and support when you need it most. Professional Growth & Development Learning & Development Program – Advance your career through structured professional development opportunities, skills training, and leadership programs tailored to support your growth within the organization. Educational Investment – Pursue your career goals with in-house training and professional development, tuition reimbursement support, and partnerships with educational institutions. Employee Experience & Community Employee Assistance Programs – Comprehensive support services to help you navigate life's challenges with confidence and resources. Discounts & Perks – Take advantage of MTA employee discount programs offering savings on products and services. Connect & Belong – Join our vibrant Employee Resource Groups to build meaningful connections, share experiences, and contribute to an inclusive workplace culture. How to Apply For Internal Applicants: Log in to the My MTA Portal, click on the My Job Search tile, select the Careers link, search for the desired position, click Apply, and follow the on-screen instructions. For External Applicants: Visit www.mta.info, click the “Careers” link located in the footer under the "The MTA" section, then click on “See All Open MTA Positions”. Search for the desired position, click Apply, and follow the instructions. Additional Information: Final salary is determined by experience, skill set, and alignment with compensation practices. The posted range reflects expected compensation and may be updated as market or business needs evolve. To be eligible for consideration for a new role, current MTA employees must complete at least one year of service in their current role prior to applying. Additionally, eligibility to interview is contingent upon maintaining a satisfactory record of job performance, attendance, and disciplinary conduct. Pursuant to the New York State Public Officers Law & the MTA Code of Ethics, all employees who hold a policymaking position must file an Annual Statement of Financial Disclosure (FDS) with the NYS Commission on Ethics and Lobbying in Government (the “Commission”). Equal Employment Opportunity MTA and its subsidiary and affiliated agencies are equal opportunity employers, including those with respect to veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. Securitas Technology specializes in centralized installation and service for enterprise and multisite security deployments, delivering consistency and reliability for the most robust security programs. At the Securitas Technology Engineering Center of Excellence (CoE), projects are designed, engineered, and commissioned to the highest industry standards to meet our clients’ unique needs. Responsibilities: • Lead a team of engineers and engineering managers in pre- and post-sales costing and design, focusing on physical security and integrated systems., • Conduct regular reviews of the engineering backlog to ensure timely and budget-compliant project completion., • Perform engineering resource planning to align resources and skillsets with sales and operational targets, particularly in the areas of physical security and access control systems., • Implement effective measures and processes for recruiting and retaining engineering staff with expertise in security technologies., • Oversee the development and implementation of design and manufacturing standards for engineering and pre-fabrication, ensuring compliance with industry standards such as UL 294 and NFPA 731., • Lead client tours at the Engineering Center of Excellence in Elmsford, NY, showcasing advanced security solutions and engineering capabilities., • Establish goals and targets for engineering staff and generate reports to measure performance against these objectives., • Oversee training programs for engineers, with a focus on the latest security technologies and industry best practices., • Manage resource allocation on projects based on individual engineers' skill sets, particularly in areas such as video surveillance, intrusion detection, and access control. Skills/Abilities: • Comprehensive knowledge of design/build engineering processes and construction submittal packages, with a focus on physical security systems., • Extensive technical expertise in engineering and physical security standards, including knowledge of IP-based security systems and cybersecurity principles., • Superior managerial and supervisory skills., • Strong analytical and problem-solving capabilities., • Proficient in financial analysis and data interpretation., • Exceptional resource management skills., • Proficient in using AutoCAD, BlueBeam, and Revit design tools., • Proficient in Microsoft Office Suite, SharePoint, and Microsoft Teams. Education and Experience: • Bachelor’s degree in Engineering required; Master’s degree in Engineering or Business Administration preferred., • Licensed Professional Engineer (PE) preferred., • Minimum of ten years of relevant experience required, with a focus on physical security and integrated systems. We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Power Studies Engineer - Critical Facilities - White Plains, NY / Remote Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will have the opportunity to partner with all levels of engineering and design staff to develop power studies for projects once design has been completed. Design projects are primarily focused around critical power systems for new data centers and expansions to existing data centers in the hyperscale / colocation markets. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. This person will work as part of the Engineering Team and interact closely with organizational leadership to complete Power Systems Studies. Working and communicating with internal team and clients effectively while following company's guidelines with company's goals, objectives and values in mind. Responsibilities: • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Execute and lead design teams and designs of complex scope, and coordinate activities of other personnel as needed, • Mentor engineers and assist with training and development to create a learning and growing environment, • Lead Power Systems Studies focused in the mission critical data center industry, • Independently perform Power System Studies for mission critical data center projects, • Evaluate Equipment: Assess equipment capabilities, ratings, and conditions (transformers, circuit breakers, capacitors, etc.); Determine if Equipment meets system requirements, • Lead efforts: proposal development, training / mentoring, and development of standards / automations to improve deliverables, • Conduct Power Systems Studies and produce reports along with final deliverables including breaker settings tables, TCC's, and arc flash labels, • Load Flow Studies: Analyze current and future system load to ensure power delivery without overloading components, • Short Circuit Analysis: Evaluate potential fault conditions to determine the system's response and ensure that equipment ratings are not exceeded, • Protection Coordination: Study the settings of protective devices such as relays, circuit breakers, and fuses to ensure they coordinate correctly and provide optimal protection, • Arc Flash Analysis: Conduct studies to determine potential arc flash hazards, calculate incident energy, and recommend safety practices and protective equipment, • Transient Stability Analysis: Evaluate the power system's ability to maintain synchronism after large disturbances, such as faults or sudden changes in load, motor starting, etc., • Develop proposals including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc. Qualifications: • 5-10+ year's Electrical Engineering experience, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Possess advanced knowledge of electrical topologies associated with mission critical facilities, • Experience designing electrical power systems for complex data center/mission critical facilities, • Experience with Protective Devices: relays, circuit breakers, and fuses with knowledge of how they function, what versions and device settings, • Understand ratings, capabilities, and conditions of various power system equipment, • SME of industry and safety standards related to power systems, with emphasis related to arc flash hazards and other safety-related matters, • Understand effects and requirements of connecting new generation or loads to existing systems, • Power system simulation software with one of the following: ETAP, PSS/E, SKM, Easy Power, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Skilled at reviewing design drawings and equipment submittals, • Perform code analysis including selection of equipment, wiring, etc. to meet code requirements, • Conduct code analysis and possess advanced knowledge of electrical codes, • Analyze and prepare documents, reports and correspondence, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • Previous experience in the Military / Military Veterans a huge plus!, • Minimal Travel: 10-20% Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: p77t1xk1qim8usuxfxiqiq7t9a@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Division: Project Management Department: Project Management Reports to: Project Manager Supervisory Duties: Yes Salary Range: $85,000.00 - $124,000.00 The Assistant Project Manager (APM) will serve as a vital team member while assisting the Senior Project Manager and/or Project Manager on all aspects of a project. APM’s will be expected to take on central roles for the oversight of the Project Engineer with a specific focus on document control (RFIs, submittals, material delivery, etc.), subcontractor coordination, design team communication, project reporting and overall representation of Consigli throughout the entirety of the project. Responsibilities / Essential Functions • Serve as a main point of contact for communication with Owners, OPMs and Design Teams members., • Coordinate and provide input during weekly meetings with subcontractors, design teams, and owner representatives to resolve field conflicts and drive resolution., • Support project cost and change management process: prepare reports for review with other team members and present at both Owner and internal meetings., • Assist in development of estimates and bid proposals for both lump sum and GMP projects., • Oversight/Management of Project Engineer and associated responsibilities including document Control, RFIs, Submittals, Material Delivery Tracking and Meeting Minutes., • Mentor: support, develop, and train supporting team members, including Project Engineers., • Maintain close relations with subcontractors, including early notification of submittal & material delivery schedule expectations., • Monitor executed subcontracts and insurance certificates; verify contracts and insurance are in place prior to commencing work., • Coordinate with Project Scheduler to update and distribute project master schedule with input from Superintendent and project team., • Assist the project Superintendent and other team members in the resolution of all critical issues, RFI’s, etc. with a focus on quality, cost and schedule; provide documentation as necessary., • Take ownership of the closeout process: complete and implement project closeout checklist., • Manage close-out documentation (as-builts, O&Ms, warranties, test reports, etc.) for submission to Design Team and Owner., • Manage financial closeout process with subcontractors and Owner., • Punch List: Upload and distribute the punch list through Procore to subcontractors., • Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive to resolutions., • Safety: perform regular safety walks with field and safety staff and record observations. Key Skills, • Strong communication skills., • Ability to review, understand and support all change management processes., • Strong initiative and problem-solving abilities., • Ability to multi-task and self-prioritize., • Motivated and driven., • Ability to work in a team environment with a primary focus on collaboration., • Excellent written and verbal presentation skills. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • 3 - 5 years’ experience within the construction industry in project management or similar role., • OSHA 10 and OSHA-30 preferred., • Additional proficiencies may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job Description JOB TITLE: Software Controls Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $120,000 - $160,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Software Controls Engineer will play a key role in the design, development, implementation, and continuous improvement of the control systems and embedded software that power Clarapath's advanced SectionStar™ and TrimStar Pro™ platforms. This individual will contribute to all phases of the product development lifecycle, from system architecture and algorithm development through implementation, testing, verification, manufacturing support, and field deployment. Working closely with mechanical, electrical, software, manufacturing, quality, and customer-facing teams, the Software Controls Engineer will develop reliable, scalable, and maintainable control software that meets performance, safety, and regulatory requirements. We are seeking a hands-on engineer who enjoys solving complex automation and motion control challenges, thrives in a collaborative and fast-paced environment, and is passionate about developing innovative medical device and robotics technologies that improve laboratory workflows and patient outcomes. Responsibilities: • Design, develop, implement, and maintain embedded software and control algorithms for motion control systems, actuators, sensors, and peripheral devices, • Develop software architecture and control logic using C/C++, Python, and other appropriate programming languages, • Design and optimize closed-loop control systems for precision motion applications utilizing servo motors, stepper motors, encoders, and other electromechanical components, • Collaborate with Electrical and Mechanical Engineering teams to integrate hardware and software into complete system solutions., • Develop communication interfaces using protocols such as CAN, RS-232, RS-485, Ethernet, USB, SPI, I2C, and UART., • Create software requirements, design specifications, verification protocols, and technical documentation in compliance with medical device design controls, • Participate in system architecture discussions and technical design reviews, • Perform software debugging, root cause analysis, and issue resolution throughout development and post-release support, • Develop automated testing tools and software validation procedures to improve product quality and reliability, • Support prototype development, system integration, and engineering verification testing, • Assist Manufacturing and Service teams with software releases, troubleshooting, and continuous product improvements., • Participate in risk management activities including software hazard analysis, FMEA, and mitigation implementation, • Support regulatory submissions and compliance efforts by generating appropriate documentation and maintaining design history files., • Contribute to continuous improvement initiatives focused on software quality, maintainability, cybersecurity, and system performance., • Provide technical support during customer installations, field investigations, and product issue resolution as needed Qualifications: • Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, Software Engineering, or a related engineering discipline, • 3–7 years of experience developing embedded software or control systems for electromechanical products, • Strong programming experience in C/C++, • Experience with embedded Linux or real-time operating systems (RTOS), • Experience developing motion control software for precision electromechanical systems, • Strong understanding of software architecture, object-oriented programming, and software design principles, • Experience interfacing with sensors, motors, actuators, and industrial communication protocols, • Familiarity with source control systems such as Git, • Experience using debugging tools including oscilloscopes, logic analyzers, and protocol analyzers., • Strong analytical, troubleshooting, and problem-solving skills, • Excellent written and verbal communication skills, • Ability to work effectively in a collaborative, multidisciplinary engineering environment, • Experience developing software for medical devices or other regulated industries, a plus, • Knowledge of IEC 62304 software lifecycle processes, a plus, • Familiarity with ISO 13485 quality management systems, a plus, • Experience with FDA Design Controls and Design History Files (DHF), a plus, • Experience developing software for robotics, automation, or precision instrumentation, a plus, • Knowledge of machine vision integration, image processing, or computer vision, a plus, • Experience with Python scripting for automation and test development, a plus, • Familiarity with cybersecurity best practices for connected medical devices, a plus, • Experience with Agile software development methodologies, a plus, • Knowledge of Jira, Confluence, and requirements management tools, a plus, • Experience with hardware-in-the-loop (HIL) testing or simulation environments, a plus Company Offers: • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • Update and maintain shop drawing and RFI log Qualifications: • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Proficient in design and calculation software MS Office: Excel, Word, Project, PowerPoint, Teams SKM Powertools, EDSA or ETAP experience is desirable • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.)Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xecygz66zc6wx6iraifwhhi5ha@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Personal training is about helping your clients get better: fitter, healthier, stronger, smarter. But as an ambitious trainer, you don't stop with clients. You push yourself, too, gaining sharper strategies, better methods, and increased mental clarity every waking moment. You believe it's your calling to make the world a fitter, healthier place. Our team of elite trainers for city-dwellers treat their craft as more than a job. Our recruitment process is rigorous. To work at Focus, you need resilience, know-how, and passion to spare. Like our clients, you take improvement seriously. You are present, supportive, and prepared. You need to be part of a movement, and that movement is us. If this describes you, please submit your application. Technical Requirements: • You have a college degree in an exercise-related field or a certificate from a licensed vocational program specializing in personal training. If you're certified, it's with a top-tier, nationally accredited certification. You also have serious practical experience and can demonstrate to us that you are committed to professional growth and continued education. • You are able to safely facilitate in-person exercise sessions and provide exercise technique demonstrations, safely spot all exercises, and ensure overall scene safety during client sessions., • You can efficiently utilize public and/or private transportation as well as public or private ingress/egress to meet clients at their homes, residential building gyms, outdoor city parks, or independently owned fitness studios., • Have availability to complete a minimum of 16 sessions per week for full-time or 6 sessions per week, part-time, including the hours of 6am-10am and/or 5pm-8pm Monday through Friday, • Lifting requirements: be able to safely hand a client a 50 lbs free weight, or take it from them. Character Specifications: You're: • Helpful. You genuinely want to make people's lives better., • Mature. No matter your age, you can handle any situation with poise, decisiveness, and a lack of drama., • Active. You take excellent care of your body from the inside out., • Resourceful. You've got to travel and train in multiple environments: from gyms to living rooms to penthouses., • Hungry. The thought of spending Saturday at an all-day continuing education course is exciting--not depressing., • Open. We're going to study, tweak and engineer your technique to help you realize your fullest potential., • Tough. That 6 am wake-up call? Traveling to clients' homes throughout the city? Little fazes you., • Friendly. Enough said! Compensation: Competitive pay and benefits starting at $37-$67 per hour. No selling or floor shifts. The position is flexible and we are looking for immediate hires FOCUS Benefits: • Monthly free education events, • Health, dental and vision insurance, • Reimbursements for travel, • Education stipends for certifications, classes, and workshops in the area, • 401K, • Paid time off. Yes- you can get paid to have another Focus trainer cover your clients!, • Workers comp & disability, • A supportive, cooperative team of dedicated professionals If you want to join our movement, please fill out your application completely and thoughtfully. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to dawn@focusnyc.com To learn more about the company, please visit our website at www.focusnyc.com. Good Luck! The Focus Team Powered by JazzHR lmRLEr4FO6

Job DescriptionJob Title: Industrial Mechanical Technician – Class A Department: Engineering Reports To: Maintenance Manager / Chief Engineer Location: Strike Force Staffing Employment Type: Full-Time or Part-Time Availability: Open Availability Required Number of Openings: Salary Range: Competitive Work Environment: Exposure to extreme temperatures (hot/cold); food handling environment Job Summary: The Industrial Mechanical Technician is responsible for providing mechanical and electrical maintenance support at SFS client facilities. This role focuses on preventative maintenance, troubleshooting, equipment repair, and supporting system installations to ensure safe, reliable, and efficient plant operations. Technicians are assigned to client sites based on their weekly availability and may work across multiple facilities depending on operational needs. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Follow all company safety rules, procedures, and PPE guidelines at all times. Qualifications & Skills:, • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • NY Boiler License is a plus, but not required. If you're a hands-on maintenance professional with a passion for keeping production running at peak performance, we want to hear from you. Join a team where your skills make a direct impact every day.

Job Description Personal training is about helping your clients get better: fitter, healthier, stronger, smarter. But as an ambitious trainer, you don't stop with clients. You push yourself, too, gaining sharper strategies, better methods, and increased mental clarity every waking moment. You believe it's your calling to make the world a fitter, healthier place. Our team of elite trainers for city-dwellers treat their craft as more than a job. Our recruitment process is rigorous. To work at Focus, you need resilience, know-how, and passion to spare. Like our clients, you take improvement seriously. You are present, supportive, and prepared. You need to be part of a movement, and that movement is us. If this describes you, please submit your application. Technical Requirements: • You have a college degree in an exercise-related field or a certificate from a licensed vocational program specializing in personal training. If you're certified, it's with a top-tier, nationally accredited certification. You also have serious practical experience and can demonstrate to us that you are committed to professional growth and continued education. • You are able to safely facilitate in-person exercise sessions and provide exercise technique demonstrations, safely spot all exercises, and ensure overall scene safety during client sessions., • You can efficiently utilize public and/or private transportation as well as public or private ingress/egress to meet clients at their homes, residential building gyms, outdoor city parks, or independently owned fitness studios., • Have availability to complete a minimum of 16 sessions per week for full-time or 6 sessions per week, part-time, including the hours of 6am-10am and/or 5pm-8pm Monday through Friday, • Lifting requirements: be able to safely hand a client a 50 lbs free weight, or take it from them. Character Specifications: You're: • Helpful. You genuinely want to make people's lives better., • Mature. No matter your age, you can handle any situation with poise, decisiveness, and a lack of drama., • Active. You take excellent care of your body from the inside out., • Resourceful. You've got to travel and train in multiple environments: from gyms to living rooms to penthouses., • Hungry. The thought of spending Saturday at an all-day continuing education course is exciting--not depressing., • Open. We're going to study, tweak and engineer your technique to help you realize your fullest potential., • Tough. That 6 am wake-up call? Traveling to clients' homes throughout the city? Little fazes you., • Friendly. Enough said! Compensation: Competitive pay and benefits starting at $37-$67 per hour. No selling or floor shifts. The position is flexible and we are looking for immediate hires FOCUS Benefits: • Monthly free education events, • Health, dental and vision insurance, • Reimbursements for travel, • Education stipends for certifications, classes, and workshops in the area, • 401K, • Paid time off. Yes- you can get paid to have another Focus trainer cover your clients!, • Workers comp & disability, • A supportive, cooperative team of dedicated professionals If you want to join our movement, please fill out your application completely and thoughtfully. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to dawn@focusnyc.com To learn more about the company, please visit our website at www.focusnyc.com. Good Luck! The Focus Team Powered by JazzHR VAr9EArftW

Langan provides expert land development engineering and environmental consulting services for major developers, renewable energy producers, energy companies, corporations, healthcare systems, colleges/universities, and large infrastructure programs throughout the U.S. and around the world. Our employees collaborate seamlessly among 50+ offices and gain valuable hands-on experience that fosters career growth. Langan culture is entrepreneurial from advancing innovative technical solutions, to participating in robust training and knowledge sharing, to making progressive change within the communities we live and work. Consistently ranked among the top ten "Best Firms to Work For" and Engineering News-Record's top 50 firms worldwide, Langan attracts and retains the best talent in the industry. Employees thrive at Langan, a firm that fosters an inclusive and supportive work environment for all; prioritizes wellbeing, health, and safety; encourages volunteerism and philanthropy; offers workplace flexibility, along with carbon-neutral office spaces; and empowers individuals to contribute their skills and knowledge to make impactful contributions. Langan is seeking a Site/Civil Engineer to join its collaborative team in our New York City, White Plains, or Melville NY locations. This individual will serve a key function in providing the planning, design, and permitting of civil engineering, land development, and infrastructure projects. In this role, you will have the opportunity to gain experience in site/civil engineering design for mixed-use developments, shopping centers, residential, higher education, federal, and other exciting land development projects in a continuous learning environment. Job Responsibilities: • Assist with the preparation and modification of various engineering documents including reports, specifications, plans, construction schedules, cost estimates and design plans for projects using engineering and design software (AutoCAD, Civil 3D, etc.) and equipment;, • Use reports, maps, drawings, engineering plans, tests, and aerial photographs to assess soil composition, terrain, hydrological characteristics, and topographical and geologic data and their impact on the planning and design of projects;, • Familiarity with current local, state, and federal land use permitting is a plus;, • Collaborate with team members on project tasks and assignments; and, • Perform other job duties as requested. Qualifications: • Bachelor's Degree in Civil Engineering;, • EIT certification. PE certification preferred;, • 3+ years of prior relevant professional experience in site/civil design, including site planning, grading, storm water management, drainage, and soil erosion;, • Proficient in AutoCAD and Civil 3D;, • Excellent written and verbal communication skills;, • Strong attention to detail with excellent analytical, multitasking, and judgment capabilities;, • Demonstrated ability to follow direction and work in a collaborative team environment. Langan provides a rich array of programs and benefits to help its employees advance their careers and enhance the quality of their lives. Our comprehensive compensation package includes: full-time employment company paid medical, dental, and vision coverage; life insurance, short- and long-term disability insurance, and paid pregnancy disability leave; 401(k)/Roth with company match; paid time off including parental and military leave; employee referral and professional license bonuses; and educational reimbursement. Langan offers employee resource groups; flexible work schedules; extensive training; wellness programs; buddy and mentoring programs; and much more! Langan is committed to providing equal employment opportunities to all qualified applicants and employees, including individuals with disabilities and protected veterans. We believe that an inclusive workplace is essential for the well-being and success of our employees.

Location: White Plains, US Summary: Leads engineering, design and development for the Civil and Mechanical Engineering groups. Leads the Civil/Structural, Mechanical, Hydropower and Transmission Engineering groups, supporting NYPA operations, maintenance, capital project portfolio and regulatory compliance. Ensures coordination of project planning, design execution and emergent project support with the Engineering department, in preparation of design drawings, specifications, calculations. Applies engineering knowledge and technology, industry standards and practices to solve project, operational, or regulatory objectives. This includes wide knowledge of utility industry related engineering, operational procedures, practices, skills. Degree(s) in Civil or Mechanical Engineering discipline preferred. Responsibilities: • Provide direct oversight and direction of NYPA NERC and NPCC compliance program within Engineering., • Accountable for execution of engineering projects, analysis and documentation under NYPA's compliance responsibility program, contributing the reliability of the Bulk Electric System., • Lead technical planning and evaluation for the asset management lifecycle of assets., • Ensure multidiscipline approach to design standards address asset life cycle Reliability, Availability, Maintainability, Safety (RAMS) methodologies and cost targets., • Facilitate and drive collaboration between Engineering disciplines, and other project stakeholders/customers in fostering a project team environment., • Enhance compliance program and adhere strictly to existing procedures to further Reliability Standards program., • Ensure processes and prioritization for NYPA's compliance program within Engineering., • Manage employees including performance management, salary administration, succession planning and workload balancing., • Identify and recommend solutions to modify staff to meet goals., • Develop staff expertise in engineering areas, create development opportunities within and/or between disciplines and maintain depth at critical core competencies within engineering., • Potential to have a direct role in emergency preparedness, incident management or response and as such will require training in the National Incident Management System (NIMS)., • Responsible for discipline design authority, and serve as engineer of record for engineering design drawings and specifications. Provide professional signature and seal and ensure adherence to configuration management policies. Knowledge, Skills and Abilities: • Subject matter expertise in one or more engineering disciplines related to equipment, systems and structures., • Broad understanding of engineering & design for generation and transmission modifications and upgrades., • Ability to facilitate and drive collaboration among various disciplines., • Broad understanding of project management principles and construction activities., • Broad understanding of equipment and infrastructure planning and asset lifecycle evaluation., • Strong project collaboration and effective communication skills., • Strong leadership ability and technical background to develop staff and maintain a highly skilled workforce., • Ability to respond and adapt to emergent and changing priorities., • Proficient in Microsoft Office, SAP, Maximo, and other platforms as required. Education, Experience and Certifications: • Bachelor of Science Degree in an Engineering discipline or equivalent, from an accredited college or university., • Master of Engineering Degree preferred., • Minimum of ten (10) years of related work experience., • New York State P.E License required, or P.E License from another state, with New York State endorsement within 12 months of start date., • Minimum 3 years of people management experience in the electric utility industry/ electrical construction. Physical Requirements: • Military Occupational Specialty Codes MOS - Army: 12A, 12B, 12P, 18C, 24A, 24Z, 51S, • MOS - Marines: 1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636, • MOS - Navy : EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $183,000 - $251,900. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email accessibility@nypa.gov.

At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work every day. As we foster a culture of inclusion throughout our company and within our communities, we constantly ask ourselves: What is our impact on the world? We believe transportation is more than movement, it's the foundation of connected, thriving communities. As part of HDR's Transportation Business Group, you'll help shape the systems that move people and goods safely, efficiently, and sustainably. From designing resilient highways and iconic bridges to advancing transit, passenger and freight rail, aviation, federal transportation ports and marine infrastructure, your work will directly support economic vitality, public safety, sustainable and resilient communities and quality of life. We bring together planners, engineers, architects, construction management staff, environmental, strategic communications, economists, management consultants and specialists across disciplines to solve complex mobility challenges with innovation, technical excellence, and a deep understanding of community needs. Whether you're modernizing aging infrastructure or pioneering next-generation transportation solutions, your contributions will help define the future of mobility. This isn't just a job, it's a chance to lead progress, drive meaningful impact, and leave a legacy of smarter, more connected transportation networks. HDR has a unique career opportunity for an experienced professional to serve in a senior leadership position in the Bridges and Structures Business Class in HDR's Transportation Business Group. The Major Bridge Technical Director opportunity is designed for a dynamic, forward-thinking leader who pairs deep technical mastery with a passion for driving professional growth and building collaborative teams. The Major Bridge Technical Director will actively champion the technical leadership of our major bridges program, provide strategic guidance and hands-on direction across all technical aspects of project development and delivery, lead project staffing and training initiatives, and ensure that HDR's industry-leading standards of practice are consistently and effectively applied across our major bridge portfolio. Primary Responsibilities: • Champion leadership in planning, directing, and monitoring all aspects of large, complex, multi-discipline bridge projects., • Provide proactive technical oversight, cross-team coordination, and collaborative problem-solving., • Deliver technical leadership for bridge design and production efforts, actively engaging with design teams., • Perform complex structural planning, analysis and design for long-span projects that may include suspension, cable stay, arch, segmental, extradosed, steel and prestressed concrete bridges., • Cultivate client relationships and actively support marketing, design, and production initiatives., • Facilitate interactive schematic, design development, and contract document work sessions at project sites alongside Project Managers, technical professionals, and other disciplines., • Make sures project deliverables and supporting documentation are complete, understandable, conform to applicable and industry standards relative to their intended purpose, including client and HDR requirements., • Serve as an accessible, high-level technical specialist while actively supervising and mentoring junior engineers. Assist in strategic marketing efforts, including proposal generation and building partnerships for major bridge pursuits., • Oversee the implementation of QA/QC procedures and conduct comprehensive reviews of bridge plans for complex projects., • Drive the execution of training programs for personnel, aligning with strategic plans and business class initiatives., • Act as a mentor and supervisor to cultivate the next generation of engineering talent., • Ensure emerging technologies are integrated into our workflows to continually advance HDR's complex bridge design capabilities., • Participate in selecting key staff nationally and globally, identifying strategic hires to fuel the growth of HDR's Bridge program., • Represent HDR through active industry participation in conferences, presentations and/or technical committees participation., • Collaborate and coordinate with the Bridge and Structures Business Class Director and the other Bridge and Structures Business Class Program Leaders., • Periodic travel throughout North America, Canada and Australia as needed to foster client relationships and provide targeted on-site technical expertise during major project kickoffs or project milestones. Preferred Qualifications: • BS/MS in Structural Engineering., • P.E. or P.Eng (and SE highly preferred) license with the ability to quickly obtain reciprocity in other jurisdictions via NCEES., • 20+ years of bridge project and client management experience, with a proven track record in significant long-span project delivery., • Must have successfully served as either the EOR or the lead of a design team responsible for delivering the final design of at least one cable-stayed bridge with a main span of approximately 900 feet or greater, where such bridge is either under construction, or has completed construction within the last 10 years., • Experience in delivering complex alternative delivery (Design Build, Progressive Design Build, P3) projects., • Must thrive when viewed as an accessible technical expert, showing a strong background of collaborative technical leadership on major bridge projects., • Dynamic, people-focused leader with experience building a cohesive team culture and managing team members in various locations., • Demonstrated business development and strategic planning skills., • Excellent communication, leadership, and mentoring skills., • Proven ability to interact with various design teams, have excellent organizational, project management and communication both written and verbal skills., • Familiarity with or ability to guide teams utilizing industry-standard bridge software platforms (such as Larsa, LUSAS, SAP 2000, or Midas Civil)., • An attitude and commitment to being an active participant of our employee-owned culture is a must., • Demonstrated experience in the design of complex long-span light rail or heavy rail structures., • Demonstrated experience in the design of complex long-span structures in regions of high seismicity., • Constructability & Erection Methods: Deep familiarity with balanced cantilever construction, heavy lifting operations, geometry control systems, and cable stressing procedures., • On-Site Construction Support: A proven track record of serving as a field engineer or providing direct on-site design support during the foundation, pylon erection, or deck segment lifting phases. Required Qualifications: • Bachelor's degree, • A minimum of 10 years bridge design experience, • Requires professional engineering license recognized by the licensing board for the location of the position offered. Example: Professional Engineer (PE or P.Eng) license., • Proven hands-on experience in all aspects of bridge design projects, • Familiarity with Bluebeam Revu and engineering software packages such as: LEAP Bridge Enterprise, FB-MultiPier, LPile, AASHTOWare BrR, midas Civil, MDX, SAP2000, CSiBridge, RM Bridge, spColumn, STLBridgeLRFD, or STLBridge., • Knowledge of ADINA, LUSAS, Bentley OpenBridge Designer and OpenBridge Modeler and/or Autodesk Infraworks and Civil3d., • Experience using Microsoft Office Suite, MicroStation, AutoCAD, MathCAD, LARSA, Prestress Concrete Design, • Demonstrated leadership skills, communication skills and ability to work with various teams, • Project management skills desirable, • Strong communication skills and willing to work in a team environment, • Must be comfortable being viewed as a technical expert in engineering analysis and design and have proven background of technical leadership on these types of projects, • An attitude and commitment to being an active participant of our employee-owned culture is a must What We Believe HDR is our company. Together, we build on each other's life experiences and perspectives to make great things possible every day. This shapes our collaborative culture, encourages organizational trust and connects us closer to the clients and communities we serve. Our Commitment As employee owners, we all have a role in creating an inclusive environment where each of us is welcomed, valued, respected and empowered to bring our authentic selves to work every day. Our eight Employee Network Groups (Asian Pacific, Black, Hispanic/Latino(a), LGBTQ+, People with Disabilities, Veterans, Women, Young Professionals) help create a sense of belonging and foster a supportive environment where everyone is empowered to engage and contribute. Each group has an executive sponsor and is open to all employees. We provide a comprehensive benefits package that promotes employee ownership, employee health, performance, and success, which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time away, parental leave, paid holidays, a retirement savings plan with employer match, employee referral bonus and tuition reimbursement. The expected compensation range for this position depends upon skills, experience, education and geographical location. (Stated benefits are for full-time regular positions. Temporary and part-time roles eligible for limited benefits.) US locations: 147,950.00-277,863.00.(Depending on location

WSP is seeking an experienced and highly motivated Technical Director, Traffic Engineering to join our team in New York. This role can be based in any of the following NY offices: Valhalla, NYC, Buffalo, or Troy. The ideal candidate is an experienced Traffic Engineer who is innovative, results-oriented, and team-focused. The right candidate would be joining a tight-knit team of traffic engineers and transportation planners who value technical excellence, career development, pride in our work, a collaborative team environment, and a passion for finding the right solutions that enhance mobility and safety. The Technical Director, Traffic Engineering will bring leadership skills to help grow our business, oversee project delivery and staff development, and provide technical assistance and guidance in engineering and design for our local, state, and regional clients. Our ideal candidate has a proven track record of successfully delivering projects from initiation through operations and maintenance, with a strong focus on client satisfaction and technical excellence. This position will primarily support projects in New York. Some project-related travel may be required. • Support the delivery and execution of project scope, objectives, and requirements, ensuring close collaboration and alignment with clients and stakeholders. Proactively identify, assess, and mitigate project risks and issues. Ensure project deliverables meet high-quality standards and specified requirements. Implement rigorous quality review processes, manage version controls, and track comments and resolutions. Prepare and present comprehensive project progress statuses using reporting tools and dashboards. Monitor and meet defined performance metrics, tracking budget, time, scope, and communication details to ensure projects meet schedule and client expectations., • Stay current with emerging technologies, industry best practices, and relevant standards., • Lead and direct multi-disciplinary project teams, including internal staff, sub-consultants, contractors, and vendors. Foster a culture of trust, transparency, and accountability., • Manage internal groups or outside vendors to identify, plan, negotiating contracts, deliver and monitoring performance to client specifications., • Coordinate with various internal and external partners, including cross-discipline and functional teams, government agencies (i.e., DOTs), and other stakeholders., • Comfortably present complex technical and project information to diverse audiences, including executives, client teams, and public forums., • Contribute to and potentially lead the development of technical proposals, scopes of work, and budgeting for projected work., • Assist in building and growing the firm's Traffic Engineering, Safety and Intelligent Transportation Systems practice across New York State., • Foster technical development and mentoring of staff., • Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures., • Perform additional responsibilities as required by business needs. Required Qualifications • Bachelor's degree in Civil Engineering, Traffic Engineering, Computer Science, or Information Technology, preferred, or equivalent years of experience., • 12+ years of progressive experience in traffic, ITS, & safety planning, analysis, and design., • Licensed Professional Engineer in the State of New York, or another state and able to obtain reciprocity in New York State within 6 months of hire. PTOE certification (highly preferred)., • Proven experience managing complex projects with budgets, schedules, and technical requirements., • Proven experience with NYSDOT, MTA, and other regional agencies., • Develop new project opportunities, manage client relationships, and prepare and manage proposal submissions, • Strong leadership, mentoring, and team-building skills., • Exceptional communication abilities including written, verbal, and public speaking., • Demonstrated success in proposal writing, client presentations, and strategic project delivery., • Ability to thrive in a fast-paced, multidisciplinary environment., • Passion for innovation, quality, and financial performance, • Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies., • Strong ability to quickly adapt to change and demonstrate flexibility to a variety of schedules and hours to meet business needs., • Occasional travel may be required depending on project-specific requirements. Preferred Qualifications • Master's Degree in Engineering., • Active engagement in relevant industry organizations., • Project experience - Traffic operations and safety, ATSPM, signal design, signal timing, NYSDOT experience, Interstate Reconstruction, Environmental Impact Statements., • Expertise in traffic engineering principles, practices, NYSDOT project delivery process, Traffic Signal Design, Signage, pavement markings, Maco, Meso and Micro-simulation modeling. WSP Benefits: WSP provides a comprehensive suite of benefits focused on providing health and financial stability throughout the employee's career. These benefits include coverage related to medical, dental, vision, disability, and life; retirement savings; paid sick leave; paid vacation (or other personal time); paid parental leave; and paid time off for purposes of bereavement, voting, and/or attendance at naturalization proceedings. Compensation: Expected Salary (all locations): $139,800 - $249,150

You will attend meetings with the Engineer Manager and may cover other Storeroom Clerks during vacations, while ensuring inventory control, ESH compliance, and safety guidelines are followed.

Job Description GENERAL STATEMENT OF DUTIES: Assists in directing and managing the Building Department; does related work as required. DISTINGUISHING FEATURES OF THE CLASS: Under the general direction of the Building Commissioner, the incumbent of this class assists and acts for the Commissioner in planning, managing and directing the policies, practices and procedures of the Department of Building. This involves jurisdiction over, and the issuance of permits for all excavations, materials, manner of erection, construction, maintenance, alteration, repair, demolition, use, occupancy, sanitary conditions, safety, inspection and all other work related to all buildings, signs, structures, appurtenances and land in the City of White Plains (exclusive of public streets). The incumbent is empowered act for and in the absence of the Commissioner to enforce all laws, ordinances, codes, rules and regulations and to issue certificates of occupancy, permits or licenses for the erection, repair and use of all buildings, land, structures, signs, appurtenances (except as may be otherwise provided for in the Charter or by ordinance or other Federal, State or local jurisdiction) in order to secure safety from hazards related to the design, construction, use, occupancy or work on lands, buildings and structures in the City. In addition, the incumbent is empowered to implement compliance to Title II of the American Disabilities Act. Supervision is exercised over a number of code enforcement officers and clerical personnel. EXAMPLES OF WORK: (ILLUSTRATIVE ONLY) Participates in and recommends the formulation of department policies, practices and procedures for the enforcement of all applicable statutes, codes and ordinances under the jurisdiction of the City’s Department of Building; Assists in preparing the annual budget for action by the Common Council and controls the administration of the approved budget; Recruits, trains, directs and supervises all personnel involved in code enforcement and inspection of buildings, lands, construction, demolition, and occupancy within City limits for conformance to all laws, ordinances, codes, rules as well as ADA compliance; Describes or explains infringements or violations, both personally or through code enforcement officers, with parties involved and secures compliance or, if necessary, directs the issuance of summonses for court action under legal guidance of the Department of Law; Confers with developers, builders, architects, engineers on proposed designs and plans including the material, layout, schematics in order to insure conformance to applicable codes and safety standards and to assist in resolving problems in order to grant permits; Provides, both personally and through code enforcement officers, expertise and guidance to those seeking permits, licenses and certificates of occupancy on how to achieve compliance and insure safety; Conducts hearings on cases of non-compliance to various ordinances in collaboration with the Department of Law; Prepares and issues findings, progress reports and corrective requirements; directs the issuance of summonses for court action if corrections are not made within specified time limits; Confers with architects and engineers on plans for major construction for conformance to all necessary codes and ordinances; Prepares detailed reports of proposed, on-going and completed projects and of departmental operation activities; Acts as advisor to the Planning Board, Zoning Board of Appeals, Building Code Appeals Board and Look-Alike Appeals Board and may attend Common Council meetings and work sessions; Conducts department staff meetings. DESIRABLE KNOWLEDGE, SKILLS, ABILITIES AND ATTRIBUTES: Thorough knowledge of modern principles and practices of engineering in an automated environment; good knowledge of NY State and City of White Plains building codes and zoning ordinances; good knowledge of public administration and management; ability to direct the work of others; ability to read and interpret complex plans; ability to write and speak effectively; integrity; sound professional judgment; ability to perform in a reasonable manner the essential functions of the position. DESIRABLE TRAINING AND EXPERIENCE: Graduation from a recognized college or university with a Bachelor’s or Master’s Degree in Engineering or Architecture, plus six (6) years experience in municipal buildings code enforcement, structural engineering, architecture, or building construction, three (3) years of which were at the supervisory level. SPECIAL REQUIREMENT: Possession of a New York license as a Professional Engineer or Architect. *NOTE: Your degree must have been awarded by a college or university accredited by a regional, national, or specialized agency recognized as an accrediting agency by the U.S. Department of Education/U.S. Secretary of Education. If your degree was awarded by an educational institution outside the United States and its territories, you must provide independent verification of equivalency. A list of acceptable companies who provide this service can be found on the Internet at http://www.cs.nygovjobseeker/degrees.cfm. You must pay the required evaluation fee. \nCompany Description About the City of White Plains White Plains, New York is a vibrant, bustling city that serves as the premier commercial, retail, and cultural hub of Westchester County. Located just 25 miles north of Manhattan, it offers the perfect blend of urban energy and suburban charm. The city features a dynamic downtown skyline, beautiful residential neighborhoods, excellent public schools, and an extensive network of parks and recreational facilities. With its major transit hub—offering a swift commute to New York City via Metro-North—and a diverse community, White Plains is a premier destination to live, work, and thrive. Our Local Government & Culture The City of White Plains municipal government is a forward-thinking organization dedicated to enhancing the quality of life for our residents and fostering a prosperous business environment. -\tComprehensive Public Services: Our workforce spans critical operational areas, including public safety (Police and Fire), public works, parking, parks and recreation, and finance. -\tIndependent Civil Service: Operating under our own independent civil service commission, we manage localized hiring and promotion pathways tailored directly to our community's operational needs. -\tCommitment to Excellence: We pride ourselves on innovation, fiscal responsibility, and responsive community service. Why Join Our Team? Working for the City of White Plains means choosing a career with impact. We offer: -\tCommunity Impact: A direct opportunity to contribute to the daily well-being, safety, and infrastructure of a thriving city. -\tJob Stability & Growth: Reliable career paths with strong internal advancement opportunities. -\tExcellent Benefits: Access to excellent public employee benefits, competitive salaries, and retirement plans. -\tInclusive Environment: A supportive workplace that champions equity and diversity as an Equal Opportunity Employer. -\tDiscover how your skills can shape our city's future. Apply today. About the City of White Plains\nWhite Plains, New York is a vibrant, bustling city that serves as the premier commercial, retail, and cultural hub of Westchester County. Located just 25 miles north of Manhattan, it offers the perfect blend of urban energy and suburban charm.\nThe city features a dynamic downtown skyline, beautiful residential neighborhoods, excellent public schools, and an extensive network of parks and recreational facilities. With its major transit hub—offering a swift commute to New York City via Metro-North—and a diverse community, White Plains is a premier destination to live, work, and thrive.\n\nOur Local Government & Culture\nThe City of White Plains municipal government is a forward-thinking organization dedicated to enhancing the quality of life for our residents and fostering a prosperous business environment.\n•\tComprehensive Public Services: Our workforce spans critical operational areas, including public safety (Police and Fire), public works, parking, parks and recreation, and finance.\n•\tIndependent Civil Service: Operating under our own independent civil service commission, we manage localized hiring and promotion pathways tailored directly to our community's operational needs.\n•\tCommitment to Excellence: We pride ourselves on innovation, fiscal responsibility, and responsive community service.\n\nWhy Join Our Team?\nWorking for the City of White Plains means choosing a career with impact. We offer:\n•\tCommunity Impact: A direct opportunity to contribute to the daily well-being, safety, and infrastructure of a thriving city.\n•\tJob Stability & Growth: Reliable career paths with strong internal advancement opportunities.\n•\tExcellent Benefits: Access to excellent public employee benefits, competitive salaries, and retirement plans.\n•\tInclusive Environment: A supportive workplace that champions equity and diversity as an Equal Opportunity Employer.\n•\tDiscover how your skills can shape our city's future. Apply today.