Shop hand jobs in Hoboken, New JerseyCreate job alerts

Job Description Power-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • OSHA 30 and site safety training. Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Job Overview We are seeking a skilled Plumbing Technician to join our team. The ideal candidate will have a strong mechanical aptitude and experience in plumbing installation and repair. This role involves working on various construction sites, performing tasks that require both technical knowledge and physical stamina. The Plumbing Technician will be responsible for ensuring that plumbing systems are installed correctly and function efficiently. Duties • Install, repair, and maintain plumbing systems in residential and commercial buildings., • Assemble and install pipes, fittings, and fixtures using hand tools and power tools., • Perform pipe threading to ensure secure connections in plumbing systems., • Conduct inspections of plumbing systems to identify issues or necessary repairs., • Collaborate with other professionals, including carpenters and general contractors, to complete projects on time., • Adhere to safety regulations while working., • Utilize basic math skills for measurements and calculations related to plumbing installations. Skills • Strong mechanical knowledge related to plumbing systems and construction practices., • Experience with driving is a must for transporting tools and materials to job sites., • Ability to build and assemble plumbing systems efficiently., • Familiarity with construction plumbing techniques and standards., • Capability for heavy lifting as required by the job duties., • Basic math skills for accurate measurements and calculations during installations. Join us as a Plumbing Technician where your skills will contribute significantly to our projects while ensuring the highest standards of quality in plumbing services! Job Type: Full-time Pay: $53,000.00 - $75,000.00 per year Benefits: • 401(k), • Company truck, • Employee discount, • Fuel card, • Tools provided Schedule: • 8 hour shift, • Overtime Supplemental Pay: • Bonus opportunities, • Overtime pay, • Performance bonus, • Tips License/Certification: • Driver's License (Required) Ability to Commute: • Queens, NY 11377 (Required)Company DescriptionService oriented plumbing shop. We do all phases of plumbing and heating. We have been in business for over 98 years.Service oriented plumbing shop. We do all phases of plumbing and heating. We have been in business for over 98 years.

Job Description About Cafecito Social Cafecito Social is a Guatemalan specialty coffee brand in Gowanus, Brooklyn. Our coffee is roasted at origin, in Guatemala, by Guatemalan roasters, and it ships fresh to Bond Street every week. In Guatemala, a cafecito is how you say sit down, stay awhile. That is the feeling we build behind the counter every day. We are a small, hands-on team. We are hiring two baristas. The people we hire will shape how our regulars feel about their morning. The Role You will pull espresso, steam milk, run the bar, and hold the standard on quality and cleanliness through a full shift. You are also the face of the café, so warmth and consistency matter as much as speed. Some shifts you will open the shop at 6:00 AM and run the morning on your own. What You Will Do · Prepare espresso drinks, pour-overs, and cold brew to our recipes and standards · Greet and serve every guest with genuine warmth, and know the menu cold · Run the Shopify POS accurately and handle cash and card payments · Open or close the café using our checklists, including cleaning, prep, and cash reconciliation · Keep the bar, seating, and back of house clean and stocked through the shift · Follow food safety and health code standards on every task · Restock beans, cups, milk, and supplies, and flag low inventory Who You Are · Six months or more on an espresso bar. We will train you on our menu, but you need to know your way around a machine · Reliable and punctual. We are a small team and every shift matters. If we cannot count on you at 6:00 AM, this is not the right fit · Wednesday through Sunday availability · Fast, calm, and friendly during a rush, and comfortable working on your own · Warm without being performative. Genuine, not a script · A team player who keeps the space clean without being asked · Legally authorized to work in the US Must Have A NYC Food Protection Certificate already in hand. If you do not have one, we will help you get certified after hire · Spanish A Plus · Latte art · Familiarity with Guatemalan or Central American coffee What We Offer $17.00/hr plus tips, with a clear path up. · A consistent, predictable schedule · Free coffee on shift · A small, respectful team · Coffee you can trace back to the farm it came from How to Apply Email hola@cafecitosocial.com with your name, a few lines about yourself, your availability, and your coffee experience. Tell us your favorite drink to make and why. No formal resume required. We would rather hear what kind of barista you are than read a list of past jobs. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description The Bouqs Co. is looking for freelance florists to help us bring arrangements and hand-tied bouquets to life across our multiple retail locations. We’re looking for individuals with all levels of experience, from seasoned designers to floral prep assistants, who are interested in flexible, project-based opportunities. Locations – Los Angeles, CA/Costa Mesa, CA/San Diego, CA/San Francisco, CA/New York, NY Responsibilities: • Produce fresh floral arrangements and hand-tied bouquets with skill, speed, and creativity, • Assist with floral prep, including processing stems, hydrating flowers, trimming, and organizing product, • Support in studio and/or shop operations, such as cleaning, stocking, moving boxes, and setting up supplies, • Help with on-site at events, including set-up, breakdown, and floral installations, • Collaborate with a team to produce beautiful, high-quality work in a fast-paced environmentQualifications:, • Experience working with florals, proven design skills and/or individuals interested in floral support, prep, and operations, • Able to work efficiently under deadlines while maintaining quality, • Capable of standing for extended periods of time and lift/move boxes, as needed, • Act as Team players with a positive attitude and love for flowers, • Prior floral experience is a plus, but not required for prep/assistant roles Note: This job description is tailored for a store-based role focused on executing Bouqs designed floral bouquets and arrangements while maintaining respectful relationships in a partnership space. Duties and responsibilities may be subject to change based on the store’s needs and production requirements. Compensation & Perks:, • Competitive Hourly Rate (depending on experience and location) We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description OVERVIEW: Provide quality nursing care to residents in a long-term care environment which promotes their rights, dignity, freedom of choice, and their individuality under the supervision of a Registered Nurse. RESPONSIBILITIES: · Provide individualized attention which encourages each resident’s ability to maintain or attain the highest practical physical, mental, and psychosocial wellbeing · Knowledgeable of the individualized care plan for residents and provide support to the resident according to the care plan. Contribute to the care planning process by providing the charge nurse or other care planning staff with specific information and observations of the residents’ needs and preferences · Attend to the individual needs of residents which may include assistance with grooming, bathing, oral hygiene, feeding, incontinent care, toileting, colostomy care, prosthetic appliances, transferring, ambulation, range of motion, communicating, or other needs in keeping with the individuals’ care requirements, and scope of practice · Maintain the comfort, privacy, and dignity of each resident in the delivery of services to them. Interact with residents in a manner that displays warmth and promotes a caring environment · Fully understand all aspects of residents’ rights, including the right to be free of restraints and free of abuse · Responsible for promptly reporting to the charge nurse or administrative staff incidents or evidence of resident abuse or violation of residents’ rights · Assist in maintaining a safe, neat, and clean environment; report environmental deficiencies to the charge nurse such as lighting or equipment problems · Protect the personal belongings of each resident including eyeglasses, dentures, hearing aids, furnishings, jewelry, clothing, memorabilia, etc. Promptly report missing items according to established policy and participate in efforts to locate missing items · Observe residents for changes in condition or behavior and promptly report these changes to appropriate licensed nursing personnel · Provide care that maintains each resident’s skin integrity to prevent pressure ulcers, skin tears, and other damage by changing incontinent residents, turning, repositioning immobile residents, and applying moisturizers to fragile skin, etc. · Answer residents’ call bells promptly and courteously · Perform various tasks assigned by the charge nurse including vital signs, residents’ weights, applying creams/ointments, collecting specimens, etc. · Assist with orienting residents and their families to the nursing home upon admission and to the unit when transfers occur · Assist and escort residents for appointments such as beauty shop, activities, church services, etc. · Complete certified nursing assistant records while using proper coding of activities of Daily Living (ADLs) documenting care provided or other information in keeping with department policies · Follow prescribed safety and infection control procedures including thorough hand washing, use of disposable gloves where indicated, and proper disposal of soiled materials · Support an atmosphere which promotes a homelike environment · Assist in the Quality Assurance and Performance Improvement (QAPI) process

Job Description OVERVIEW: Provide quality nursing care to residents in a long-term care environment which promotes their rights, dignity, freedom of choice, and their individuality under the supervision of a Registered Nurse. RESPONSIBILITIES: · Provide individualized attention which encourages each resident’s ability to maintain or attain the highest practical physical, mental, and psychosocial wellbeing · Knowledgeable of the individualized care plan for residents and provide support to the resident according to the care plan. Contribute to the care planning process by providing the charge nurse or other care planning staff with specific information and observations of the residents’ needs and preferences · Attend to the individual needs of residents which may include assistance with grooming, bathing, oral hygiene, feeding, incontinent care, toileting, colostomy care, prosthetic appliances, transferring, ambulation, range of motion, communicating, or other needs in keeping with the individuals’ care requirements, and scope of practice · Maintain the comfort, privacy, and dignity of each resident in the delivery of services to them. Interact with residents in a manner that displays warmth and promotes a caring environment · Fully understand all aspects of residents’ rights, including the right to be free of restraints and free of abuse · Responsible for promptly reporting to the charge nurse or administrative staff incidents or evidence of resident abuse or violation of residents’ rights · Assist in maintaining a safe, neat, and clean environment; report environmental deficiencies to the charge nurse such as lighting or equipment problems · Protect the personal belongings of each resident including eyeglasses, dentures, hearing aids, furnishings, jewelry, clothing, memorabilia, etc. Promptly report missing items according to established policy and participate in efforts to locate missing items · Observe residents for changes in condition or behavior and promptly report these changes to appropriate licensed nursing personnel · Provide care that maintains each resident’s skin integrity to prevent pressure ulcers, skin tears, and other damage by changing incontinent residents, turning, repositioning immobile residents, and applying moisturizers to fragile skin, etc. · Answer residents’ call bells promptly and courteously · Perform various tasks assigned by the charge nurse including vital signs, residents’ weights, applying creams/ointments, collecting specimens, etc. · Assist with orienting residents and their families to the nursing home upon admission and to the unit when transfers occur · Assist and escort residents for appointments such as beauty shop, activities, church services, etc. · Complete certified nursing assistant records while using proper coding of activities of Daily Living (ADLs) documenting care provided or other information in keeping with department policies · Follow prescribed safety and infection control procedures including thorough hand washing, use of disposable gloves where indicated, and proper disposal of soiled materials · Support an atmosphere which promotes a homelike environment · Assist in the Quality Assurance and Performance Improvement (QAPI) process QUALIFICATIONS: EDUCATION / EXPERIENCE: · A high school diploma or equivalent; successful completion of a state-approved Nursing Assistant Certification course or other education which meets state certification requirements · Must hold current Nursing Assistant Certifications in the state in which they are practicing · Must be knowledgeable of resident rights and ensures an atmosphere which allows for the privacy, dignity and well-being of all residents in a safe, secure environment. · Current CPR (American Heart Association) SUPERVISORY RESPONSIBILITIES: · This position has no supervisory responsibilities. WORK ENVIRONMENT: · This job operates in a health care setting. This role requires regular walking to various locations around the care center. · Incumbent may be exposed to virus, disease and infection from patients and specimens in working environment. · Incumbent may be required to work extended periods of time at a video display terminal. · Incumbent may experience traumatic situations, including psychiatric, and deceased patients. PHYSICAL REQUIREMENTS: · The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. · While performing the duties of this job, the employee is regularly required to talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus · This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. · The employee must frequently lift or move objects and patients weighing over 50 pounds.

Job Description OVERVIEW: Provide quality nursing care to residents in a long-term care environment which promotes their rights, dignity, freedom of choice, and their individuality under the supervision of a Registered Nurse. RESPONSIBILITIES: · Provide individualized attention which encourages each resident’s ability to maintain or attain the highest practical physical, mental, and psychosocial wellbeing · Knowledgeable of the individualized care plan for residents and provide support to the resident according to the care plan. Contribute to the care planning process by providing the charge nurse or other care planning staff with specific information and observations of the residents’ needs and preferences · Attend to the individual needs of residents which may include assistance with grooming, bathing, oral hygiene, feeding, incontinent care, toileting, colostomy care, prosthetic appliances, transferring, ambulation, range of motion, communicating, or other needs in keeping with the individuals’ care requirements, and scope of practice · Maintain the comfort, privacy, and dignity of each resident in the delivery of services to them. Interact with residents in a manner that displays warmth and promotes a caring environment · Fully understand all aspects of residents’ rights, including the right to be free of restraints and free of abuse · Responsible for promptly reporting to the charge nurse or administrative staff incidents or evidence of resident abuse or violation of residents’ rights · Assist in maintaining a safe, neat, and clean environment; report environmental deficiencies to the charge nurse such as lighting or equipment problems · Protect the personal belongings of each resident including eyeglasses, dentures, hearing aids, furnishings, jewelry, clothing, memorabilia, etc. Promptly report missing items according to established policy and participate in efforts to locate missing items · Observe residents for changes in condition or behavior and promptly report these changes to appropriate licensed nursing personnel · Provide care that maintains each resident’s skin integrity to prevent pressure ulcers, skin tears, and other damage by changing incontinent residents, turning, repositioning immobile residents, and applying moisturizers to fragile skin, etc. · Answer residents’ call bells promptly and courteously · Perform various tasks assigned by the charge nurse including vital signs, residents’ weights, applying creams/ointments, collecting specimens, etc. · Assist with orienting residents and their families to the nursing home upon admission and to the unit when transfers occur · Assist and escort residents for appointments such as beauty shop, activities, church services, etc. · Complete certified nursing assistant records while using proper coding of activities of Daily Living (ADLs) documenting care provided or other information in keeping with department policies · Follow prescribed safety and infection control procedures including thorough hand washing, use of disposable gloves where indicated, and proper disposal of soiled materials · Support an atmosphere which promotes a homelike environment · Assist in the Quality Assurance and Performance Improvement (QAPI) process QUALIFICATIONS: EDUCATION / EXPERIENCE: · A high school diploma or equivalent; successful completion of a state-approved Nursing Assistant Certification course or other education which meets state certification requirements · Must hold current Nursing Assistant Certifications in the state in which they are practicing · Must be knowledgeable of resident rights and ensures an atmosphere which allows for the privacy, dignity and well-being of all residents in a safe, secure environment. · Current CPR (American Heart Association)

The HazMat Industrial Services Driver/Technician will be responsible for proper transportation of various waste streams at various generator sites. Perform the operational functions relating to clean-up of industrial waste in a safe, efficient manner and in compliance with all applicable regulations. Performs operational functions relating to an emergency response hazardous and non-hazardous spill clean-up projects in a safe, compliant manner and in compliance with all applicable regulations. Operate trucks to perform pickups of bulk and containerized hazardous and non-hazardous wastes. Performs a variety of duties that comply with government regulations and procedures. Principle Responsibilities: • Operates light and heavy equipment relating to clean up, including: tanker, roll-off, liquid and turbo vacuums, box trucks, tractor trailers, skid steer, forklift, pumps and pallet-jack., • Responds to customer spills and emergencies during normal business hours and after hours., • Performs pre-trip and post-trip Department of Transportation inspections., • Maintains vehicle logs., • Performs general housekeeping, including maintenance of equipment and site., • Performs less-than-truckload (LTL) pickups and full truck loads., • Maintains company equipment., • Ensures customer satisfaction., • Maintains documentation of manifests and work orders., • Processes hazardous and non-hazardous materials as needed., • Assists in maintaining good housekeeping at facility and on grounds., • Functions as technician on lab pack, field service projects, and Industrial Service field projects., • Performs other related duties as assigned. Preferred Qualifications: • Ability to use heavy and light equipment, such as tanker, vacuum truck, forklift and pallet-jack., • Skilled using hand and shop tools, and instruments., • Demonstrates accuracy, thoroughness and attention to detail., • Must be able to prioritize, stay focused and handle multiple, diverse responsibilities. Minimum Qualifications: • A valid class B commercial driver's license is required., • Current 40-hour HAZWOPER Training or ability to pass course upon hire. Pay Range: $25.44 - $38.16 Bonus Plan Details (if applicable): Rewarding compensation and benefits • Comprehensive medical benefits coverage, dental plans and vision coverage., • Health care and dependent care spending accounts., • Short- and long-term disability., • Life insurance and accidental death & dismemberment insurance., • Employee and Family Assistance Program (EAP)., • Employee discount programs., • 401(k) plan with a generous company match., • Employee Stock Purchase Plan (ESPP). Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. About The Company: Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic's total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: • Safe: We protect the livelihoods of our colleagues and communities., • Committed to Serve: We go above and beyond to exceed our customers' expectations., • Environmentally Responsible: We take action to improve our environment., • Driven: We deliver results in the right way., • Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. Strategy: Republic Services' strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers' multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste: We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers' specific needs. Environmental Solutions: Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. Sustainability Innovation: Republic's recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation's first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. Recent Recognition: • Barron's 100 Most Sustainable Companies, • CDP Discloser, • Dow Jones Sustainability Indices, • Ethisphere's World's Most Ethical Companies, • Fortune World's Most Admired Companies, • Great Place to Work, • Sustainability Yearbook S&P Global

Established in 1930, Frank's Truck Center is an award-winning dealership serving our clients with high quality customer service. We're looking for energetic, experienced mechanics to add to the growing team in our world-class Service Department. Family owned and operated for over 90 years Frank's Truck Center and Frank's GMC is a proud GMC franchise in addition to representing Hino, Freightliner & Isuzu commercial trucks. Our dealership is located in Lyndhurst, New Jersey and also has service, parts & financing departments on site. We specialize in commercial trucks and have a large commercial truck parts department that serves New Jersey, New York City and more. We offer a full benefits package including: • Competitive hourly salary – $20-$40 per hour, depending on experience, • Top pay for A-Level Technicians, depending on experience, • Opportunities for Efficiency Bonuses increase earnings potential, • Opportunities for overtime increase earnings potential, • Opportunities for advancement with factory paid training!, • Annual union scale salary increases, • Health, Dental, Vision insurances, • 401(k) AND Pension Plan, • Paid Time Off and Sick Time, • Uniform Service and Work Boot allowance, • Closed on Sundays, • Union Shop, • Tool Allowance, • Weekly pay days Some Job Responsibilities are: • The day-to-day duties include diagnosing and preparing vehicles for repairs, performing repair work with the utmost of skill and accuracy and completing all duties in a timely manner., • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed., • Provide an estimate of time needed for additional repairs, • Execute repairs under warranty to manufacturer specifications, • Willingness to contribute to the team by participating in ongoing training Qualifications needed are: • High school diploma or equivalent, • 2-5+ years of Service Technician experience required, • A or B level qualification including Diagnostic, Electrical and Engine Repair a preferred and a PLUS, • ASE Certification preferred and a BIG PLUS, • Technical Training preferred and a PLUS, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Ability to learn new technology, repair and service procedures and specifications, • Ability to lift 50-75 lbs. or more with or without assistance, • Ability to work independently and as part of a team, • Basic written and verbal communication skills, • Valid driver's license and clean driving record, • Ability to work in a shop environment that is effected by frequently changing temperatures., • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to continue to learn and keep up with certifications and training We are an equal opportunity employer and drug-free workplace. Frank’s Truck Center prohibits discrimination and harassment in regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$26.00/hr per union contractMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionDiesel Technician II Pay: $27 per hour At First Student, our Technicians play a critical role in keeping our vehicles maintained, reliable, and safe for the students and communities we serve. As a Technician II, you will perform routine and advanced maintenance and repair work on buses, vans, and other fleet vehicles. This is a hands-on position for an experienced automotive or diesel technician who can complete repairs with moderate supervision, troubleshoot mechanical issues, and support preventative maintenance and inspection work. Why Join First Student? We are proud to offer: • Competitive pay of $27 per hour, • Tremendous career advancement opportunities due to our strong presence across North America, • A positive and rewarding work environment, • Opportunities to develop advanced diagnostic and repair skills, • Support for obtaining CDL and ASE certifications, • The opportunity to work on a wide range of automotive and diesel systemsYour Responsibilities As a Technician II, you will: • Perform routine and advanced maintenance on buses, vans, and other fleet vehicles, • Diagnose and repair vehicle and equipment issues with moderate supervision, • Complete repairs involving brakes, engine tune-ups, suspensions, drivetrains, transmission clutches, and related systems, • Replace bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, filters, fluids, and other components, • Inspect tires and complete tire maintenance and related repairs, • Assist Technician III employees with preventative maintenance services, safety inspections, and annual vehicle inspections, • Remove and replace engines, transmissions, and differential assemblies under Technician III supervision, • Assist with road calls and emergency repairs as needed, • Identify potentially unsafe equipment and notify management of the issue and corrective action taken, • Review completed work before vehicles are returned to service and obtain approval when required, • Accurately complete work orders and document repairs, parts, and supplies used, • Maintain parts usage records and order repair parts from approved suppliers, • Safely move vehicles between parking, service, and work areas, • Repair and maintain shop tools and equipment, • Maintain a clean, organized, and safe work environment, • Clean vehicles when requested, • Provide informal guidance or support to Technician I employees, • Perform other duties as assignedWhat We Are Looking For, • Approximately three years of automotive or diesel repair experience, or an equivalent combination of technical education and experience, • Intermediate mechanical aptitude and troubleshooting ability, • Experience completing mechanical repairs with moderate supervision, • High school diploma or GED preferred, • Vocational or technical certification in vehicle repair preferred, • Valid driver's license, • Class B CDL with passenger endorsement, or the ability to obtain one within three months of hire, • State vehicle inspection license where required, • ASE certifications preferred, • Ability to participate in the company's ASE testing program within one year of hire, • Ability to obtain three ASE certifications within 12 months of hire, • Knowledge of state DOT vehicle inspection and safety standards, • Working knowledge of computerized diagnostic and maintenance systems, • Ability to safely use hand tools, power tools, and shop equipment, • Strong communication and customer service skills, • Ability to work independently and as part of a maintenance team, • Reliable and predictable attendance, • Personal mechanic tool inventory sufficient to complete assigned repairsPhysical Requirements and Work Environment This position works in a maintenance shop environment that may include dust, dirt, grease, noise, and changing weather conditions. Technicians must be able to: • Lift at least 50 pounds, • Work in crouched, kneeling, standing, and lying positions, • Work underneath vehicles using a mechanic's creeper, • Work indoors and outdoors in varying weather conditions, • Safely operate vehicles, tools, and maintenance equipment This position is subject to applicable DOT drug testing and physical requirements. In the state of Washington, this position is considered safety-sensitive and is subject to drug and alcohol testing, including cannabis testing. First Student's commitment to safety, dependable transportation, and putting our customers first creates a working environment where your skills directly support the communities we serve. Apply today and help us keep our fleet safe and on the road. We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. First Student is committed to providing a drug-free workplace and is an equal opportunity employer. By supporting an inclusive culture, we help create opportunities for continued growth and success for all. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

A Supervisor (full-time) is a valued member of a high performing team who is empowered & equipped to do their job. You will know why your work matters and be able to take pride in what you do! This role is perfect for you if you have recent leadership experience and are passionate about a career in retail. The anticipated rate for this position is $23.00 per hour depending on location, knowledge, skills, education and experience. This position is also eligible for a monthly bonus. In addition, we offer comprehensive and competitive benefits to Associates (and their families) such as medical, dental, vision, life insurance, short-term and long-term disability. Eligible Associates are able to enroll in our company's 401k plan. Associates will accrue paid time off up to 152 hours per year (inclusive of PTO, floating holidays, and paid holidays). Paid sick time up to 64 hours per year unless otherwise required by law. Respectful schedules during operating hours of 6am - 10pm. Why You'll Love it: • People First Culture, • Respectful scheduling, • Paid time off, • Bonus opportunity, • Associate Discounts, • Company Matched 401(K), • Medical/Dental/Vision Insurance, • Additional Benefits including HAS, discounted gym membership, EAP and more!, • Closed on Thanksgiving, Christmas & Easter, • Clear path to promotion & continuous leadership development, • Stable employment with growing company What You'll Do: • Ensure and model professional customer service, • Maintain a safe, clean, and organized store, • Cross-train in all areas of store operations including Stocking/Sales associate duties, and responsibilities, • Lead, coach, and develop others, • Serve as Leader on Duty as scheduled, • Other duties as assigned Requirements: • Must be at least 18 years old., • 1 year experience in retail leadership role., • Ability to communicate clearly with customers and associates in person, e-mail, and telephone., • Ability to intermittently lift, push and/or pull up to 50 pounds, and stand/move for entire shift., • Ability to lift, bend, kneel, climb, crawl and/or twist, and safely climb up/down a ladder., • Physically able and willing to become certified to operate a forklift in accordance with IIPP. (Injury, and Illness Prevention Program), • Ability to work a flexible schedule, including evenings, holidays and weekends as necessary to meet the needs of the business. Regular attendance is an essential function of the job. Harbor Freight is an equal employment opportunity employer and provides reasonable accommodations to qualified individuals in accordance with applicable law. We're a 45 year-old, $8 billion national tool retailer with the energy, enthusiasm, and growth potential of a start-up. We have over 1,600 stores in 48 states across the country and are opening several new locations every week. We offer our customers more than 7,000 tools and accessories, from hand tools and generators to air and power tools, from shop equipment to automotive tools. We provide our customers with the right tool for the right job at the right price, always delivering quality and value. Position Type: Full Time

Job Description Full-Time Positions Available: • Sheet Metal Duct Shop Fabricator, • Sheet Metal Duct Installer (Tin Knocker) and or HELPER, • HVAC Service Technician/Mechanic, • Delivery Driver, • Bookkeeper (Office Worker) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Shop Fabricator: We have a full operating sheet metal fabrication shop. We fabricate duct work for commercial and residential buildings. Responsibilities • Operate Plasma to cut 5'x10' sheets of metal., • Operate machines to cut, shape, and form sheet metal including roller, rotodie, shear, punch press, hand brake, weighting machine, plasma cutters, and more., • Drill and punch holes in metal, for electrical components, screws, bolts, or rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Trim, file, grind, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Finish parts, using hacksaws, and hand, rotary, or squaring shears., • Develop and lay out patterns that use materials most efficiently., • Insulate ductwork using glue & pinspotter., • Maintain equipment, making repairs and modifications when necessary. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Installer (Tin knockers) Position: Responsibilities: • · Installation of a variety of Commercial HVAC equipment, • · Installation of a variety of HVAC DUCTWORK (round, spiral, rectangular), • · Sheet metal Fabrication in the field as necessary., • · Responsible for sheet metal measurements, sketching and ordering ductwork. Requirements: • · Reading and interpreting blueprints, • · To have a basic understanding of central air conditioning systems, • · Should be reliable, self-motivated, have the ability and knowledge to read specifications and Shop Drawings., • · Should possess good communication skills, • · Must be able to maintain a safe work area, • · Should also have a flexible attitude and should be willing to travel at any given point of time --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- HVAC Service Mechanic Position: Responsibilities: · Install new heating, ventilation, and air conditioning systems · Inspect and perform equipment repairs and replacements · Perform routine preventative maintenance · Respond to emergency maintenance requests · Adhere to all safety policies and procedures · Responsible for the installation of large mini-split systems, including refrigeration piping, pipe insulation, and control wiring · Perform start-up of newly installed HVAC systems · Perform Service repairs and troubleshooting diagnostics to existing HVAC systems · Perform in the field using related experience and knowledge of codes and specifications. Qualifications: · Previous experience in HVAC or other related fields (minimum of 5 years prior experience) · Familiarity with HVAC wiring diagrams · Ability to handle physical workload · Run Refrigeration piping · Strong problem solving and critical thinking skills · Qualified individuals most possess a full-range of mechanical knowledge · Ability to Navigate NYC Subway Systems Delivery Driver: • Looking for a driver to deliver Duct work and material to job sites daily., • When not making deliveries, driver will help fabricate duct work Education · Technical trade school diploma and training certificate is a plus · Minimum of 5 years’ experience in a commercial HVAC application and Ductwork installation • Helpers Minimum of 2 years' experience in commercial and or Residential · OSHA 30 hours \nCompany Description We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy. We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Performs miscellaneous job-related duties as assigned by supervision. KNOWLEDGE, SKILLS AND ABILITIIES REQUIRED • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Candidate must have “Team” like mentality and be willing to work with a group EQUIPIMENT/MACHINERY USED • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc. MINIMUM QUALIFICATIONS • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Demonstrates effective verbal and written communication skills. PHYSICAL REQUIREMENTS • Moderate physical activity., • Requires handling of average-weight objects up to 50 pounds and pushing, pulling or standing and walking for extended periods of time. The job location is at 2 Lawrence Road, Springfield, NJ 07081 Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

New Daily Shop Opening Spring 2025 StuyTown (STY) Address: 409 E 14th St New York, NY 10009-2700 This will be Whole Foods Markets 2nd Daily Shop location! Introducing a new, quick-shop store format designed to provide customers in urban neighborhoods a quick, convenient shopping experience with easier access to the fresh, high-quality offerings they expect from Whole Foods Market. The new format, called Whole Foods Market Daily Shop, initially launched on the Upper East Side in NYC in the Fall of 2024. Orders, replenishes, support overall pricing integrity, receives, and accounting for the store. Monitors inventory control and replenishes product based upon WFM ordering standards and maintaining OTS standards. • Order and replenish products for all perishable and/or non-perishable products and maintain appropriate back stock levels., • Monitors, verify, and acts upon open PO reports and or supplier paperwork for both purchases and credits in an accurate and timely manner., • Completes all training on time., • Controls spoilage/shrink in all areas of the store. Analyzes and controls product transfers, waste, and spoilage., • Completes spoilage and all other inventory management processes, sampling, temperature, and sweep worksheets as required., • Ensures orders for product are timely and accurate to monitor inventory turns., • Support leadership with getting store ready for inventory., • Supports the auditing of store tags, signs, and scale prices to confirm tag / signage / price match., • Maintains financial profitability by meeting and exceeding purchasing and sales targets for store., • Provides excellent customer service, addresses the need of customers in a timely and effective manner and models suggestive selling techniques, answers phones and pages promptly and courteously., • Confirm product integrity and Check product temperatures as needed., • Stamps, initials, processes, and files invoices., • Follows Whole Foods Market Correct Pay Procedures, • Accurately closes purchase orders in the proprietary store purchasing application., • Adheres to and meets Receiving standards as outlined in Store Process., • Distributes all store expense invoices to Store Leadership., • Follows and complies, or ensures compliance, with established procedures, including Weights and Measures, health and sanitation, and safe work practices., • Maintains, or ensures maintenance of, a clean and sanitary working and shopping environment; maintains equipment in accordance with WFM cleanliness and safety standards., • Working knowledge and application of all WFM quality goals, food handling, safety, merchandising expectations, and other standards., • Strong basic math skills. Knowledge and ability to use computer programs such as Microsoft Word, Excel, Outlook and ordering systems., • Strong with excellent communication skills and willingness to work as part of a team., • Ability to deliver information clearly and respectably to fellow Team Members, customers, and vendors., • Ability to meet customer service expectations and standards in all interactions with customers, vendors, and Team Members., • Ability to follow directions and procedures, effective time management and organization skills., • Strong work ethic and ability to work in a fast-paced environment with a sense of urgency and strong attention to detail., • 12+ months retail experience preferred but not required. Physical Requirements/Working Conditions: • Must be able to lift fifty pounds., • In an 8-hour workday: standing/walking 6-8 hours., • Hand use: single grasping, fine manipulation, pushing and pulling., • Work requires the following motions: bending, twisting, squatting, and reaching., • Exposure to FDA approved cleaning chemicals., • Exposure to temperatures: <32 degrees Fahrenheit (freezing), 32-40 degrees Fahrenheit (refrigerators), >90 degrees Fahrenheit., • Ability to work in a wet and cold environment., • Ability to work a flexible schedule including nights, weekends, and holidays as needed. The wage range for this position is $18.50-$30.20 Hourly, commensurate with experience. Whole Foods Market offers "Whole Benefits". Whole Benefits offers a wide range of benefits for Full and Part-Time Team Members, including eligibility for a store discount, paid time off, financial wellness, health & wellness support programs, and access to other Team Member perks. Eligibility for Whole Benefits is determined under the terms of the applicable Whole Benefits plan at a person's date of hire and may vary based on work location, length of service, and job type (such as regular or seasonal).

Job DescriptionThis position will perform routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under direct supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. All work is performed with a commitment to safety.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$23.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on basic maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components, • Assist Tech II or III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Assist in the performance of mechanical repairs including the repair of brakes, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately, • Diagnoses and performs accurately all phases of vehicle and equipment repair under direct supervision., • Evaluates completed work prior to release and seeks approval where required, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Moves vehicles safely between job and work area, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement highly preferred to perform test drives or assist with road call response (expected within 3 months of hire, exceptions can be submitted for approval by Maintenance Leadership., • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 1 ASE within 24 months of hire) Minimum Experience or Skills Required • Basic mechanical aptitude and 0-1 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Basic problem-solving ability, • Basic computer skills, • Comfortable using hand tools, • Good customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess basic mechanic hand tools with at least enough tools to perform job requirements Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

About Us Perform Properties is a Blackstone Real Estate portfolio company focused on high‑performing retail and office properties with people‑appeal - vibrant spaces where people actively choose to work, shop, and gather. With expertise in transactions, development, leasing, and management, we oversee approximately 30 million square feet of properties across the U.S. Our culture is built on our OneTeam foundation - a shared commitment to collaboration, innovation, and knowledge sharing across roles, teams, and time zones. Guided by this foundation, our OneTeam Core Values define how we show up every day: · Act with Intention · Make It Happen · Raise the Bar · Stay Curious · Win as One Join a team where performance and partnership go hand in hand. Job Summary The Office Coordinator will play a critical role in providing excellent service and ensuring the smooth operation of EQ’s Santa Monica Office. This position requires a combination of exceptional interpersonal skills, organizational abilities, and a customer-focused mindset. The Office Coordinator serves as the primary point of contact for visitors, clients, and is responsible for delivering a positive experience while efficiently managing various office tasks. This role is required to be on-site Monday through Friday, 8:00 am – 5:00 pm. Essential Job Functions Office Coordination: • Oversee welcome of guests to EQ’s Santa Monica Office ensuring guests are greeted and made comfortable while coordinating hand-off to appropriate EQ staff, • Managing guest access using Open Path, including sending and tracking guest invitations, and providing support to guests with access issues, • Overseeing the workplace reservation system, including scheduling reservations, confirming bookings, and notifying employees of any changes, • Coordinating lunch orders for employees, • Keeping office and kitchen inventory - ordering and stocking supplies, • Maintain office and ensure communal areas are kept tidy and ready for use, • Prepare guest and meeting refreshments and maintain associated equipment, • Assist with space planning, • Oversee office calendar with birthdays and seasonal holidays and execute office celebrations, • Coordinate Employee and Guest Parking Provide Logistical Support For Offsite And Regional Events, Including • Assist with planning and organizing offsites, team-building activities and other recognition events on and off-site, • Attend offsites and assist with coordinating events, production and distribution of materials, and other related logistical needs Qualifications • Two or more years of office management and support experience in real estate, consulting and/or financial services industries, • Excellent communication skills in written and oral communications; able to communicate effectively with individuals at all levels of the organization, • Strategic thinker who can frequently assess the “why” and tailor work product and communication as needed; escalate issues with potential solutions and pivot with changes, • Meticulous planner who is detailed in planning, execution and follow-up, • Excellent technical, interpersonal, and analytical skills required; utilization of previous file sharing and collaboration software to understand capabilities and leverage to get things done, • Works well as part of a team, takes ownership in projects, and works quickly and effectively under strict deadlines, • Proficiency with Teams, Zoom, Adobe Acrobat, • Advanced skills with Microsoft Excel, Word, PowerPoint required, • Ability to multitask in a fast-paced growth-oriented company, • Ability to occasionally lift and move up to 20 lbs., • Punctual, reliable, and available to work from 8:00 am - 5:00 pm, • Be available to travel as needed(up to 5% of the time) Base Salary Range: $80,000-$90,000. This represents the presently-anticipated low and high end of the Company’s base salary range for this position. Actual base salary range may vary based on various factors, including but not limited to location and experience. Benefits: The Company provides a variety of benefits to employees, including health insurance coverage, retirement savings plan, paid holidays and paid time off (PTO). The additional total direct compensation and benefits described above are subject to the terms and conditions of any governing plans, policies, practices, agreements, or other materials or documents as in effect from time to time, including but not limited to terms and conditions regarding eligibility. EEO Statement Our company is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our employment decisions are based on individual qualifications, job requirements and business needs without regard to race, color, marital status, sex, sexual orientation, gender identity and/or expression, age, religion, disability, citizenship status, national origin, pregnancy, veteran status and or any other legally protected characteristics. We are committed to providing reasonable accommodations, if you need an accommodation to complete the application process, please email recruiting@performproperties.com

Job DescriptionAbout MDC MDC Contractors Corp is a New York City site concrete and hardscape subcontractor. We self-perform sidewalk, curb, ADA ramp, and site concrete work as a licensed NYC DOT Permittee, and we manage major landscape construction packages including granite and unit pavers, precast elements, plaza and courtyard hardscape, and full streetscape buildouts. We work for top NYC general contractors and developers on commercial, residential, and institutional projects across the five boroughs. We are owner-operated, fast-moving, and growing. Our PMs run their own jobs with full authority. They own the schedule, the GC and design-team relationships, the permits, and the financials. We are hiring a senior project manager to step into one of the most important seats in the company. The Opportunity This is not a seat-warmer role. The right candidate will run a portfolio of active site concrete, hardscape, and landscape projects from preconstruction through closeout. The role also offers a clear path to a senior operations seat, with responsibility for mentoring junior PMs, shaping how we run our jobs, and eventually helping run the business. If you are a strong site concrete or hardscape PM today and you want runway to do more than manage your own jobs, this role is built for you. Responsibilities • Project portfolio: Run multiple active site concrete, hardscape, and landscape projects simultaneously from contract execution through final payment and retainage release., • Scope mix: Concrete sidewalk and curb (self-performed), granite and unit pavers, precast concrete (planters, copings, benches, walls, treads), plaza and courtyard hardscape, ADA ramps, and full streetscape packages., • GC, owner, and design relationships: Be the face of MDC to GCs including AECOM, Pavarini-McGovern, Tishman, Shawmut, and Pizzarotti, along with developers, landscape architects (MNLA, Hollander, Field Operations, OLIN, SCAPE, and similar), and site civil engineers., • Permits and inspections: Pull and manage NYC DOT street opening and sidewalk permits, coordinate HIQA inspections, manage embargo periods, secure after-hours variances, and navigate Parks or NYCDDC requirements when in scope., • Financial performance: Own job cost, monthly AIA G702/G703 billing, change order pricing and negotiation, T&M tickets, and forecasted profit on every project., • Schedule and logistics: Drive pour and paver-setting schedules, ready-mix and precast deliveries, hoisting and rigging for precast erection, traffic control, and pedestrian protection., • Documentation: Lead RFIs, submittals (mock-ups, stone samples, precast shop drawings), change order requests, T&M tickets, and daily reports. Keep the project paper trail clean and defensible., • Subcontractor and supplier management: Manage stone suppliers, precast fabricators, ready-mix suppliers, demo and asphalt subs, rebar fabricators, and finishing crews. Issue subcontracts, approve invoices, and hold partners accountable., • Safety and compliance: Work alongside our site teams and safety director on SST compliance, OSHA, DOB filings where required, and prevention of DOT violations and CAR exposure., • Mentorship: Develop our junior PMs and project engineers. Help build the playbook we run our jobs on. Required Experience • Eight or more years as a Project Manager on NYC site concrete, hardscape, or landscape construction projects., • Direct experience running landscape and hardscape scopes including granite or unit pavers, precast concrete elements, and plaza or courtyard buildouts., • Hands-on experience with NYC DOT permitting, HIQA inspections, and sidewalk and roadway specifications., • Proven track record running multiple jobs simultaneously, mixing lump-sum and unit-rate scopes., • Strong financial discipline. You can read a budget, build a forecast, and defend a change order without hand-waving., • Fluent in AIA G702/G703 billing, change order documentation, RFIs, T&M tickets, mock-up coordination, and shop drawing review., • Comfortable with Procore, Bluebeam, Microsoft Project or P6, and Excel., • Existing relationships with NYC GCs, developers, landscape architects, and site civil teams., • Leadership presence. You can walk a job, run a coordination meeting, and push back on a GC or design team without burning the relationship. Nice to Have • Engineering, Construction Management, or Landscape Architecture degree. Not required if the field experience is real., • Prior experience on the GC or landscape-architect side of hardscape construction. Helpful for negotiating from both sides of the table., • Familiarity with NYC Parks, NYCDDC, NYCHA, SCA, BPCA, or other public-agency work., • Experience with podium-deck and over-structure hardscape (waterproofing coordination, drainage layers, pedestal-set pavers)., • Spanish proficiency for field communication. Compensation and Benefits Base salary range is $165,000 to $200,000 or more, depending on experience, with a meaningful annual performance bonus tied to project P&L and company performance. The top end is open for the right candidate with a clear path to operations leadership. • Vehicle allowance or company vehicle., • Paid time off and holidays., • Clear growth path toward Senior Operations or VP-level responsibility., • Direct access to ownership. Your decisions matter and you are not buried under three layers of management. How to Apply Send a resume and a short note about the most challenging site concrete or landscape project you have run. Tell us what made it hard, what you would do differently, and what the final P&L looked like compared to your original budget. We care more about that paragraph than any cover letter. Email: Joseph@mdccontractorscorp.com Subject line: Senior PM, [Your Name] About MDC MDC Contractors Corp is a New York City concrete subcontractor working on high-rise residential, commercial, and institutional projects across the five boroughs. We self-perform structural concrete including foundations, superstructure, slabs, and architectural concrete for top-tier general contractors and developers. We are owner-operated, fast-moving, and growing. Our PMs run real jobs with real authority. They own the project, the GC relationship, the schedule, and the financials. We are looking for a senior leader to step into one of the most important seats in the company. The Opportunity This is not a seat-warmer role. The right candidate will run a portfolio of active concrete projects from preconstruction through closeout. The role also offers a clear path to a senior operations seat, with responsibility for mentoring junior PMs, shaping how we run our jobs, and eventually helping run the business. If you are a strong concrete PM today and you want runway to do more than manage your own jobs, this role is built for you. Responsibilities: • Project portfolio: Run 2 to 4 active concrete projects simultaneously, from contract execution through final payment., • GC and owner relationships: Be the face of MDC to GCs (Turner, AECOM, PMG, Tishman, Plaza, Hunter Roberts, Skanska, and others), owners, architects, and structural engineers., • Financial performance: Own job cost, monthly AIA billing (G702/G703), change order pricing and negotiation, and forecasted profit on every project., • Schedule and logistics: Drive concrete pour schedules, crane and pump coordination, rebar and embed deliveries, and weather contingencies., • Documentation: Lead RFIs, submittals, change order requests, and field tickets. Keep the project paper trail clean and defensible., • Subcontractor management: Manage rebar, post-tension, pump, formwork, and finishing subs. Issue subcontracts, approve invoices, and hold them accountable., • Safety and compliance: Work alongside our site teams and safety director on SST compliance, DOB filings, OSHA, and CAR/violation prevention., • Mentorship: Develop our junior PMs and project engineers. Help build the playbook we run our jobs on. Required Experience • Eight or more years as a Project Manager on structural concrete projects in New York City., • Proven track record running multiple jobs simultaneously, each $5M to $30M or more in concrete scope., • Deep knowledge of NYC construction including DOB filings, SST requirements, scaffold and sidewalk shed coordination, crane permits, and after-hours variances., • Strong financial discipline. You can read a budget, build a forecast, and defend a change order without hand-waving., • Fluent in AIA G702/G703 billing, change order documentation, RFIs, and submittals., • Comfortable with Procore, Bluebeam, Microsoft Project or P6, and Excel., • Existing relationships with NYC GCs, developers, and structural engineering firms., • Leadership presence. You can walk a job, run a coordination meeting, and push back on a GC without burning the relationship. Nice to Have • Engineering or Construction Management degree. Not required if the field experience is real., • Prior experience on the GC side of structural concrete. Helpful for negotiating from both sides of the table., • Experience with post-tension, architectural concrete, or complex foundation work., • Spanish proficiency for field communication. Compensation and Benefits Base salary range is $165,000 to $200,000 or more, depending on experience, with a meaningful annual performance bonus tied to project P&L and company performance. The top end is open for the right candidate with a clear path to operations leadership. • Vehicle allowance or company vehicle., • Health insurance., • Paid time off and holidays., • Clear growth path toward Senior Operations or VP-level responsibility., • Direct access to ownership. Your decisions matter and you are not buried under three layers of management. How to Apply Send a resume and a short note about the most challenging concrete project you have run. Tell us what made it hard, what you would do differently, and what the final P&L looked like compared to your original budget. We care more about that paragraph than any cover letter. Email: Joseph@mdccontractorscorp.com

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics. It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description TitleValve Assembler / Machinist Full DescriptionValve Assembler / Machinist Urgently Hiring | Full-Time Our Client is an established valve manufacturer operating for more than 100 years. We are looking for a Valve Assembler who is detail-oriented and able to work closely with fellow team members to ensure products are functional and built correctly. Must be mechanically inclined. This role is in-person based out of our facility located at 3850 Review Ave, Long Island City, NY 11101. (MANUAL MACHINING REQUIRED - 5 YEARS EXP) Responsibilities: Assemble components following closely detailed instructions Use of pneumatic air tools Visually and mechanically inspect as instructed Use of manual machining equipment Modification of valve bodies Maintain a clean and safe work area Room for advancement Excellent communication skills Qualifications: 5 years experience with lathes and milling machines Knowledge and practical experience setting up and operating conventional and manual equipment Willingness to learn and apply new concepts and procedures Good hand and eye coordination Use of caliper - willing to train Maintain an excellent attendance record Benefits: 401(k) with matching Health, dental, and vision insurance Life insurance Paid time off Union shop Schedule: 8-hour shift Day shift: 7:00 AM to 3:30 PM Monday to Friday

Job Description Come and join our team! TitanCorp is looking for an experienced Maintenance Supervisor for one of our amazing properties. The role of Maintenance Supervisor is to provide proper maintenance for the community, along with providing excellent customer service to all residents and prospects. The purpose of the Maintenance Supervisor is to provide proper maintenance for the entire community. This includes providing excellent customer service to all residents and prospects.. Maintenance Supervisor must wear complete uniform with I.D. badge when working on any Titan Corp. property at all times, including nights and weekends. Essential Duties include the following (other duties may be assigned): 1. Maintenance Supervisor must provide a dependable vehicle for proper maintenance of property., 2. Complete all service requests within 24 hours, unless it requires extraordinary parts or labor., 3. Serve on-call duty as necessary and/or as scheduled by the Community Director., 4. Respond to emergency maintenance calls from the answering service., 5. Keep an adequate supply of parts in the maintenance shop., 6. Keep the maintenance shop in a clean and orderly manner, compliant with any and all regulatory requirements., 7. Responsible for pool and deck area, chemicals, cleanliness, and rest rooms., 8. Responsible for the monitoring, operation, and maintenance of the trash compactor., 9. Help keep grounds and streets free of litter., 10. Maintain and clean car wash., 11. Change air-conditioner filters in laundry and office monthly., 12. Responsible for making sure all breezeways and security lights are in working order daily., 13. Maintain all amenity areas., 14. Assist Community Director in any unusual activity if necessary for the smooth operation of the property., 15. Keep all project directional signs clean, painted, and level., 16. Responsible for bi-weekly servicing and preventative maintenance of golf carts., 17. Place door hanger card on front door when working inside an apartment. Always leave a note for the resident to inform them when and why maintenance has entered their apartment., 18. Communicate with the Community Director before you are going to be out of work for any reason., 19. Monitor grills and picnic areas, repair as needed., 20. Monitor guidelines for cleaning vacant office, and other common areas., 21. Must be able to read and understand service requests, chemical mixes for pools and other chemical uses. Must be able to read, understand, and teach information on hazard warning labels on any chemicals or products used in the operation of the maintenance department. Must be able to read and understand wiring schematics and wiring diagrams. Also must be able to read and understand the distribution panel that supplies power to appliances and electrical equipment used in apartment maintenance., 22. Must be able to trouble-shoot and service HVAC equipment, plumbing equipment, and electrical equipment., 23. Maintain a preventative maintenance program that minimizes necessary repairs and service requests and maintains the physical condition of the property., 24. Hire, develop, and manage a full complement of highly motivated, customer service-oriented, onsite staff., 25. Maintain the company's hazardous chemicals program, and teach and promote proper, safe work practices among the maintenance staff., 26. Provide assistance to the Asset Manager and Community Director during the budgeting process for maintenance allocations., 27. Schedule employees so that service is provided while overtime is minimized., 28. Perform all other duties as directed by the Community Director and assist the overall team effort in any way possible. While performing the above responsibilities and assignments, you may be required to perform tasks that will require a great amount of physical exertion. Listed below are common requirements for your duties as Maintenance Supervisor for Eos: · Use various hand tools and test equipment; these items may vary in weight from a few ounces to 40 pounds. · Use a 30-pound can of refrigerant for servicing of air-conditioners. · Hand-carry and use a 70-pound refrigerant recovery unit. · Hand-carry and install air-conditioning compressors weighing from 40 pounds to 120 pounds, depending upon the size of the condensing unit · Hand-carry and install air-conditioning condenser units weighing 100 to 250 pounds. · Hand-carry and install furnace / forced air unit weighing up to 90 pounds. · Hand-carry and install hot water heaters weighing between 70 and 90 pounds. · Hand-carry and install commode / closet combination weighing 40 to 50 pounds. · Make sure preventative maintenance is done on all weight room equipment. · Use of a ladder is required to change light bulbs in breezeways and on buildings. These ladders could range in weight from 10 to 125 pounds. · Pool maintenance is a big responsibility and often requires you to lift and / or transport 100-pound drums of granular chlorine, 50-pound drums of stick chlorine, and 50-pound bags of soda ash or bicarbonate of soda. You are responsible for replacing pool pump room motors and pumps. These pumps and motors could range from 25 to 200 pounds, depending on the size required. · As part of your daily maintenance routine, you may be required to move appliances from one apartment to another apartment on opposite ends of the community. The appliance may have to be transported by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to over 200 pounds. · At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All of these functions require different physical exertion and their weight depends on the particular equipment (usually in excess of 100 pounds) · You will be required to perform certain resident service functions or make upgrades to the apartment. An example would be to install track lighting or ceiling fans. Both duties would require the work to be done using a stepladder and require lifting with two hands. In addition to the above, you will be required to lift and transport other items pertaining to maintenance (weighing up to 200 pounds) for the smooth operation of the property. Customer Service Responsibilities: · Communicate clearly to the residents, both verbally and in writing. · Read and / or listen to resident requests / concerns. · Receive resident concerns in a calm and open manner. Qualifications: Special Skills Required . Bilingual desired. . Five (5) years Lead Maintenance Technician experience desired · Must be proficient in heating and air-conditioning, plumbing, appliance repair, and in many other areas of repair, which are performed on a daily basis. · Must have a sense of pride about a job well done, be courteous and tactful, and have a commitment to quality work. · Must be clean cut, neatly dressed, and wear proper uniform each day. · Must have good character and background that can stand up under a thorough background check. · Must take and pass a drug-screening test and agility test. · Must be able to communicate to residents, both verbally and in writing, and receive residents' concerns in a calm and open manner. · Must have dependable transportation; capable of carrying tools and parts to ensure an efficient use of time to provide proper building maintenance. · Must have a valid driver’s license. Knowledge · General property operations: · Safety · Heating and A/C · Plumbing · Pool Care · Electrical · Carpentry · Appliance / Equipment Repair · Wallpaper / Painting

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Key Responsibility Areas: • Assist in generating and updating test documentation, including standard operating procedures (SOPs), work instructions, and quality criteria for HTS magnet testing., • Support design, prototyping, and commissioning of custom test fixtures and equipment., • Work alongside test engineers, magnet designers, and manufacturing engineers to incorporate "lessons learned" from testing into future designs., • Manage virtual and physical inventory, organize assembly areas, and update manufacturing Bills of Materials (BOMs)., • Assist hardware procurement, evaluating vendor specs, and ensuring incoming parts meet quality standards., • Track test metrics and results, and progress against critical program milestones. Ideal Experience & Skillsets: • Currently pursuing a Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, Materials Science, or a related technical field., • Strong foundational understanding of engineering drawings and spatial mechanics (exposure to GD&T is a major plus)., • Hands-on project experience (e.g., Formula SAE, rocketry club, robotics club, etc.) involving mechanical or electrical hardware design, build, and test., • Familiarity with relevant hardware and software for developing test controls including LabView, Python, National Instruments, thermocouples and voltage taps, and similar equipment and software, • Direct experience with fabrication or assembly processes such as machining (hand tools, manual mill, CNC), fastened and bonded assemblies, soldering, etc., • Familiarity with CAD software (e.g., SolidWorks, NX)., • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Exceptional work ethic, with clear communication and collaboration skills, • Ability to occasionally lift objects up to 50 lbs. Company Benefits:, • Salary range $21 - $25/hourRequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.Key Responsibilities:, • Assist in generating and updating manufacturing documentation, including standard operating procedures (SOPs), work instructions, and quality criteria for HTS magnet assembly., • Support design, prototyping, and commissioning of custom manufacturing tooling, fixtures, and equipment., • Work alongside magnet designers and manufacturing engineers to incorporate "lessons learned" from the shop floor into future designs., • Manage virtual and physical inventory, organize assembly areas, and update manufacturing Bills of Materials (BOMs)., • Assist hardware procurement, evaluating vendor specs, and ensuring incoming parts meet quality standards., • Track production metrics, test results, and progress against critical program milestones. It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description JOB DESCRIPTION JOB TITLE: Maintenance Mechanic Engineer DEPARTMENT: Engineering REPORTS TO: Director of Engineering QUALIFICATION REQUIREMENTS: 1. Reading, writing and oral proficiency in the English language., 2. Four (4) years technical training and field experience as a mechanic., 3. Some background with laundry, HVAC and Kitchen Equipment. JOB FUNCTIONS: The ability to follow proper payroll and uniform procedures. The ability to provide service and repairs as outlined in the Technical Skills List, depending on grade level, for electrical, plumbing, steam, gas, fire & safety, HVAC, refrigeration, interior, paint and decorating problems. The ability to lubricate machinery on a regular basis. The ability to provide machinist work to all equipment such as replacing and repairing bearings, gears, belts, shafts, control mechanism, etc. The ability to always conduct oneself in a professional manner reflects the high standards of The Pierre, a Taj Hotel. The ability to ensure a clean, neat and organized work area. The ability to maintain a good working relationship with other employees. The ability to handle and report any accident immediately, no matter how minor. The ability to respond properly in any hotel emergency or safety situation. The ability to perform other tasks or projects assigned by hotel management and staff. The ability to maintain and re-lamp all lamps in the hotel, including socket repair and replacement. The ability to install electrical wiring for renovations, electrical outlet additions, motors and associated equipment. The ability to provide preventive maintenance of all electrical equipment and updating of appropriate logs. The ability to clean all stations in Engineering and maintain a neat and organized department. The ability to adjust and clean televisions. The ability to respond to all guest complaints regarding the maintenance of their room or public areas in a timely manner. The ability to perform preventive maintenance in guest rooms and public areas. The ability to assist on all plumbing stoppages in the building. The ability to repair an assortment of items brought to the shop by other departments. The ability to clean grease traps, filters and drains as necessary. The ability to assemble desks, shelving, cabinets, etc. assigned. The ability to assist engineers on major shutdowns for repairs. The ability to assist guests with special requests such as opening luggage when keys are lost. The ability to maintain logs for all work performed while on duty. The ability to install or relocate any addition or existing equipment when necessary. The ability to treat urinals with de-liming solution. The ability to take meter readings, record temperatures and pressures in heating and cooling plant. The ability to check all mechanical rooms. The ability to clean gas burners and charcoal burners. The ability to clean fixtures and shades. The ability to unplug toilets and change out valves and valve seats. The ability to respond to work orders or room inspection reports submitted by Department Heads. The ability to respond to all emergency conditions such as fires, power failures, etc. The ability to maintain a good working relationship with other employees, providing instruction and encouragement as needed. The ability to ensure a clean, neat and organized work area. The ability to handle and report any accident immediately, no matter how minor. The ability to respond properly in any hotel emergency or safety situation. The ability to perform other tasks or projects assigned by hotel management and staff. PHYSICAL, COGNITIVE, SOCIAL AND ENVIRONMENTAL REQUIREMENTS: NOTE: All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. PHYSICAL DEMANDS ANALYSIS: Positions: • Engineers must have excellent flexibility for moving in and out of all positions -sitting -standing, walking -squatting -stair climbing is absolutely essential -ladder climbing is absolutely essential -leaning on ladder while overhead reaching -kneeling, half-kneeling, hands/knees -side sitting, long-sitting -belly crawling, crawling through holes and small openings -crawling over and under pipes -supine -overhead, forward, and lateral reach -midline crossing -hook grip, spherical grip, and prehension -lifting floor to overhead -carrying -pushing/pulling Forces: Tool belts: 15 lbs. Bags of rock salt: 50 lbs. Televisions: 45 lbs. Chemical drums: 100 lbs. Motors: 5 lbs. to 120 lbs. Lint bag: 15 lbs. 1/2 lb. to 30 lb. force required to turn various types of valves in the boiler room Other items unweighted: • ladders, • tools, • pipe Repetitions: • Tool belts are worn for a full shift., • 50 lb. bags of rock salt are carried by one person upstairs 5 x shift every day for a week at a time. Total: 98 bags per month, • Televisions are lifted to carts on an as needed basis, • Chemical drums are lifted from ground to cart to ground about 1 x month, • Lint bag is lifted out of tub of water from squat position 1 x day and replaced with clean bag, • Stair climbing: 20-30 steps between flights. Stair climbing takes place several times an hour and is unavoidable, • Standing and walking is essential all day Environment: * Must be able to tolerate vibration of hand tools • Must be able to tolerate inclement, cold, and very warm environmental temperatures, • Must be able to withstand 30 m.p.h. winds while working in air ducts, • Must handle chlorine, acids, and caustics (protective gear is provided), • Must have excellent balance for ladder climbing, standing on round structures such as the boiler (when adjusting overhead valves), • Must be able to tolerate noisy machinery, air compressors, motors, very frequently Sensory: • Sight, hearing, balance needed to analyze problems, make repairs, safety purposes, • Good sensation is also needed as engineers often work

Job Description Why We Work Here: • + Supportive and friendly culture, • + Growth opportunities, • + Competitive Pay & Benefits, • + Company paid Holidays, Sick time and Vacation time, • + State of the art shop Interstate Air Conditioning & Heating, Inc. is one of the leading HVAC repair, installation and management companies in the New York & New Jersey Market. Our Sheet Metal Fabricators play an important role in our company. They fabricate and assemble sheet metal using machines and hand tools to product high quality HVAC ductwork. Responsibilities • Select gauges and types of sheet metal or non-metallic material, according to product specifications., • Operate machines to cut, shape, and form sheet metal including roller, rotodie, shear, punch press, hand brake, weighting machine, plasma cutters, and more., • Drill and punch holes in metal, for electrical components, screws, bolts, or rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Finish parts, using hacksaws, and hand, rotary, or squaring shears., • Develop and lay out patterns that use materials most efficiently., • Insulate ductwork using glue & pinspotter., • Maintain equipment, making repairs and modifications when necessary. Qualifications 1-3 years experience in a similar role required. Must be able to stand for the duration of the day to perform sheet metal working tasks. Constant reaching to perform fabrication tasks, use tools and operate machines. Occasionally lift up to 70lbs Powered by JazzHR SOHIF6wJwR

Job DescriptionBenefits: • Holiday Pay, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Opportunity for advancement, • Training & development, • Vision insurance We are hiring a Production Materials Coordinator. This position will work with all departments to get finished products organized and taken to their destination within the facility. This position will also assist in the completion of final assembly and packaging as needed. This is a direct hire position with full company union benefits. Primary Job Responsibilities -Assist Production Manager to direct Warehouse staff workload as necessary. -Identify component requirements for productions from engineering -Review work orders, shipping orders or requisitions to determine items to be moved, gathered or distributed and/or shipped -Track delivery of materials, supplies and equipment where needed -Assist with job scheduling in SAP -Read/Interpret assembly blueprints -Work independently and follow a schedule -Participate in shop cleanup activities -Communicate with Shop Leads regarding quality and production schedules -Responsible for quality as related to job duties, with authority to address issues of quality at any level -Ability to multi-task in a fast-paced environment -Assist coworkers with other tasks as assigned -Operate within the requirements of an ISO 9001 Quality System -Work with SAP Management Software and Smartsheets to expedite production schedules -Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality -Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Job Requirements -Ability to understand assembly prints -Mechanical aptitude; excel at the physical assembly of parts -Performs a variety of assembly operations using drawings, BOM’s and Work Order Travelers to assemble modules, boards, panels and cables -Uses small hand tools such as needle nose pliers, de-soldering tools, tweezers, brushes, screwdrivers, clippers and wire strippers -Basic computer skills -Good communication skills -Positive attitude Physical Demands -The employee is frequently required to stand; use hands to finger, handle or feel objects, tools, keyboards or controls -Reach with hands and arms; and talk or hear -Occasionally required to walk, sit; and may also be required to stoop, kneel, crouch or crawl -Must occasionally lift and/or move up to 50 pounds Hours: Occasional overtime is a requirement of this job, and these hours may change to meet the needs of our business. 1st Shift: Monday - Friday 6:00 am - 3:00 pm 2nd Shift: Monday - Friday 3:30 pm - 12:00 am* *Includes an additional shift pay differential Pay: $21-$24/hr. BREAK/LUNCH: 30 minutes lunch, plus two 15-minute breaks, to be determined by manager

Job Description The InProduction team has spent the better part of the last decade combining the best seating and staging companies into a one-stop shop for most of what is needed to produce an event. Starting with SGA Production Services, we added and integrated T&B Equipment, CommuniLux Productions, Nussli U.S., and Seating Solutions to become today’s InProduction. These acquisitions have allowed InProduction to evolve into the largest provider of temporary seating, staging, structures, and scenic production for the United States events industry. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page https://www.inproduction.com/ As a Professional Sports Scaffolding Laborer at InProduction, here is what you can expect: • Daily Routine of scaffolding structures at some fascinating professional venues like football and soccer stadiums, baseball fields, tennis courts, golf courses, hockey rinks, and racetracks for example. You can expect to see much of the work we completed while watching a game or event on tv., • Crews which you will be assigned to will be no more than 5 employees and will travel from job to job together as a crew., • Full Time, Consistent and Year-Round Work without having to wonder when or if the next assignment is coming., • Work Environment is generally outdoors so you will be in the sun and fresh air while building., • Overnight Travel will be the routine and you can be away from home for 90+ days at a time., • Travel Accommodations and hotel lodging will be arranged and provided by InProduction. We stay two crew members to a room. Hotel rooms will usually have small kitchens so you can prepare meals., • Benefits are available to you and your eligible family members such as medical insurance, dental insurance, vision insurance. When eligible you will have paid vacation, paid holidays, and great opportunity for weekly overtime.·, • Growth and Opportunity to grow your construction skills which may provide an opportunity to become a Crew Lead, a Foreman, Project Manager, or wherever else it leads you. Additional Duties and Responsibilities: • Build and breakdown scaffolds, install ladders, walkways and handrails, • Assist in the safe and efficient installation/removal of equipment in accordance with project specific plans and layouts, • Inspecting all scaffold components prior to assembly, • Clean and prepare construction sites, including removing debris and materials, • Load and unload equipment and materials form truck and vehicles, • Study plans and equipment lists prior to on-site installation, • Ensure appropriate safety measures are followed; including wearing and use of safety equipment, • Maintain fall protection requirements while erecting / dismantling scaffolds, • Make sure that tools and equipment are cleaned and maintained properly at the end of each shift, • Ensure full client satisfaction in relation to the quality of service and finished product within planned time schedules, • Other duties as required Compensation: $18 and above. Requirements • Background Check and Drug screening required, • Valid driver's license preferred, with good driving record., • Familiar with basic hand tools, drills, saws, hammers, etc., • Cannot be afraid of heights, • Creative problem solver with the ability to handle multiple tasks simultaneously, • Ability to work both independently and within a team setting to achieve company goals, • Able to lift-up to 75Ibs, • Candidate should be able read and understand basic safety instructions, • Candidates from a Scaffolding, Carpentry, Construction, Laboring or Events background are preferred., • Must be capable of working overtime, • Preferred but not required: Bi-lingual (English/ Spanish) Benefits • Medical, Dental, and Vision Insurance, • 401K Match, • 100% company paid Basic Life and AD&D Insurance, • Voluntary supplemental benefits, • Paid Holidays, • Paid Vacation, • Paid Sick, • Daily Per-Diem

Job Description Shop Technician Specialist-Audio Salary Range: $23.00-$26.00/Hour Job Responsibilities: Pulling and staging equipment from warehouse for outbound shows. The position is responsible for prepping outbound shows in our warehouses. Job Duties: • Preparing/returning show equipment, • Package and label items appropriately for transportation or based on show requirements, • Work with operations to ensure proper substitutions or shortages, • Receive sub-rented items into order to ensure fulfillment, • Create Shipping manifest or carnet prior to shipping, • Ability to run a department within the warehouse, • Assist pushing the equipment to various docking stations for outbound delivery, • Loading/unloading trucks, • Assist restocking delivered equipment in various locations throughout the warehouse, • Solid knowledge of R2, • Document service in inventory system and report all damaged equipment to operations, • Keep detailed records of maintenance, QC, and items entered into repair, • Other duties as assigned by the Director of Operations Position Type/Expected Hours of Work: Fulltime, ability to work flexible hours, including nights and weekends. Availability to work overtime. Required Education and Experience: • Positive Attitude and ability to work independently, • Attention to detail, ability to multitask, and meet deadlines, • Ability to lift 50 pound on a frequent basis, • Ability to spend long periods of time standing or moving in a 70,000+ square foot warehouse, • Physical activities include using hand tools, bending, stooping, lifting, climbing stairs, carrying, walking and/or reaching on a frequent basis, • Certified to drive sit down and standup forklift.

Job Description SUMMARY We are seeking a skilled and reliable Fabricator to support the production of fast-paced, creative projects. This role works under the direction of Lead Fabricators, Production Managers, Department Heads, and reports to the Production Director. Fabricators play a critical role in producing parts and assemblies across a range of fabrication methods. Strong production fundamentals, creative problem-solving, and collaboration are essential to delivering projects on time and to a high standard. The ideal candidate is resourceful, eager to learn, and thrives in an environment where priorities can shift quickly, with the intent of delivering exceptional results. Salary Range: $22 - $35 / hour (Dependent on experience) PRIMARY RESPONSIBILITIES -Fabricate, assemble, and support shipping preparation as required by project needs. -Follow shop drawings, instructions, and production guidance with close attention to accuracy, quality, and safety. -Assist with material preparation and cut lists as directed, flagging shortages or issues before fabrication begins. -Build and assemble projects with consideration for installation, shipping, handling, and site conditions. -Communicate work progress, questions, or issues clearly and early to supervisors or project leadership. -Prepare tools, hardware, materials, and work areas for shop and on-site tasks as directed. -Contribute to on-site installations and strikes by executing assigned tasks under the direction of Lead Fabricators, Production Managers, or the Production Director, maintaining professional conduct client standards. -Assist with shop logistics as needed, including unloading, staging, crating, and preparation efforts across departments. -Collaborate across departments and take on tasks as needed to support production and overall shop capacity. -Take ownership of work quality by proactively identifying issues and incorporating direction and feedback from senior staff. -Maintain a clean, organized, and safe work environment, ensuring tools, materials, and equipment are handled properly. -Actively seek out work and responsibilities when available, keeping work moving through the shop. -Participate in ongoing skill development and cross-training to support evolving production needs. Requirements -High school diploma or equivalent; background in the arts preferred. -2+ years of fabrication experience in fast-paced creative production workshops. -Strong working knowledge of hand tools, power tools, and shop safety practices. -Ability to read, interpret, and work from shop and architectural drawings. -Solid understanding of materials, hardware, and fabrication processes. -Excellent communication skills, both written and verbal. -Highly organized, detail-oriented, and punctual, with strong time management and multitasking abilities. -Maintains a calm, solution-driven attitude in high-pressure environments. -Demonstrates initiative, reliability, and a strong sense of accountability. -Comfortable working on ladders, lifts, or access platforms. -Ability to lift 50+ lbs and remain standing for extended periods. -Must be flexible and adaptable, with a willingness to work occasional extended hours, including overnight, and weekends, when necessary. -Willingness to travel outside the NY metro area, including flights and overnight stays. -Must be eligible to work in the U.S. Benefits • Employee Health Insurance. Three plans are available after a two-month waiting period, with TwoSeven covering from 55 to 70% of the premium., • (401k) After one year of employment, up to 4% of the salary matched., • Profit-sharing of up to 5% of salary after 1 year of employment., • Up to 80 hours PTO per year., • Up to 40 hours of sick leave per year., • 6 Paid holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)., • Life, short-term, and long-term insurance., • Paid Family Leave.

Job Description SUMMARY We are seeking a skilled and reliable Seasonal / Over-Hire Fabricator to support the production of fast-paced, creative projects. This role works under the direction of Lead Fabricators, Production Managers, Department Heads, and reports to the Production Director. Fabricators play a critical role in producing parts and assemblies across a range of fabrication methods. Strong production fundamentals, creative problem-solving, and collaboration are essential to delivering projects on time and to a high standard. The ideal candidate is resourceful, eager to learn, and thrives in an environment where priorities can shift quickly, with the intent of delivering exceptional results. Salary Range: $22 - $35 / hour (Dependent on experience) PRIMARY RESPONSIBILITIES -Fabricate, assemble, and support shipping preparation as required by project needs. -Follow shop drawings, instructions, and production guidance with close attention to accuracy, quality, and safety. -Assist with material preparation and cut lists as directed, flagging shortages or issues before fabrication begins. -Build and assemble projects with consideration for installation, shipping, handling, and site conditions. -Communicate work progress, questions, or issues clearly and early to supervisors or project leadership. -Prepare tools, hardware, materials, and work areas for shop and on-site tasks as directed. -Contribute to on-site installations and strikes by executing assigned tasks under the direction of Lead Fabricators, Production Managers, or the Production Director, maintaining professional conduct client standards. -Assist with shop logistics as needed, including unloading, staging, crating, and preparation efforts across departments. -Support production across departments as directed to meet project needs. -Take responsibility for the quality of assigned work, incorporating direction and feedback from senior staff. -Maintain a clean, organized, and safe work environment, ensuring tools, materials, and equipment are handled properly. -Remain productive and responsive to direction when assigned tasks are complete, adapting to changing project needs. Requirements -High school diploma or equivalent; background in the arts preferred. -2+ years of fabrication experience in fast-paced creative production workshops. -Strong working knowledge of hand tools, power tools, and shop safety practices. -Ability to read, interpret, and work from shop and architectural drawings. -Solid understanding of materials, hardware, and fabrication processes. -Excellent communication skills, both written and verbal. -Highly organized, detail-oriented, and punctual, with strong time management and multitasking abilities. -Maintains a calm, solution-driven attitude in high-pressure environments. -Demonstrates initiative, reliability, and a strong sense of accountability. -Comfortable working on ladders, lifts, or access platforms. -Ability to lift 50+ lbs and remain standing for extended periods. -Must be flexible and adaptable, with a willingness to work occasional extended hours, including overnight, and weekends, when necessary. -Willingness to travel outside the NY metro area, including flights and overnight stays. -Must be eligible to work in the U.S. Benefits • Up to 40 hours of paid sick leave per year (1hr. for every 30hrs. worked)., • Paid Family Leave after 175 days of employment., • Short and long-term disability insurance - on the 25th day of employment., • (401k) after one year of employment with up to 4% of your salary matched (some limitations apply).

Job DescriptionNow Hiring: Paratransit Fleet Technician Pay: $32.00/hour First Student is hiring a Fleet Technician to support our paratransit fleet. This is a hands-on maintenance role working with buses and vans that provide essential transportation service to the community. About the Position As a Fleet Technician, you'll perform routine maintenance, inspections, and repairs to help keep our vehicles safe, reliable, and ready for service. You'll work under the direction of experienced maintenance leadership while developing your technical skills and gaining experience working on a large transportation fleet. Key Responsibilities Perform routine preventive maintenance and safety inspections on buses, vans, and other fleet vehicles Complete basic mechanical repairs and replace worn or damaged components Inspect brakes, tires, fluids, electrical systems, and other vehicle systems Diagnose basic mechanical issues and communicate additional repair needs Complete work orders and maintain accurate maintenance records Assist with road calls and vehicle breakdowns when needed Maintain a clean, safe, and organized shop and work area Follow First Student, DOT, and all applicable safety and maintenance requirements Qualifications 3+ years of automotive, diesel, fleet, or related mechanical experience High school diploma or GED preferred Valid driver's license Class B CDL with passenger endorsement preferred; ability to obtain required licensing within approximately 3 months of hire Ability and willingness to participate in First Student's ASE certification program Expected to begin ASE participation within the first year and obtain at least one ASE certification within 24 months Basic mechanical aptitude and willingness to learn Ability to safely use standard hand and shop tools Working Conditions & Physical Requirements Ability to lift up to 50 pounds Ability to stand, bend, kneel, climb, and work around vehicles for extended periods Comfortable working in a maintenance shop and outdoors in varying weather conditions Ability to safely operate vehicles and maintenance equipment as required This is a safety-sensitive position and is subject to applicable DOT and company drug and alcohol testing requirements. If you're mechanically inclined and want to build a long-term career maintaining a professional transportation fleet, we want to hear from you. Apply today to become a Fleet Technician with First Student. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I. In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$25.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job DescriptionDescription: About the job Join our San Francisco office and be a part of a global network of offices spanning five cities (New York, Bangkok, San Francisco, London, and Miami). Consistently voted as one of the top three most admired firms in hospitality design, you’ll be working on conceptually driven projects that include restaurants, bars, hotels, and multi-family residential. You’ll be joining a collective of some of the smartest, and design-forward-thinking designers and experts in hospitality-driven experiences. ROLE DESCRIPTION Intermediate level Furniture & Lighting Designers are contributing staff members to the core AvroKO design team under the leadership of the Director of Industrial Design. The candidate must be motivated and knowledgeable about the furniture and lighting design industry, with experience in various aspects of hands on fabrication. They will need to be incredibly organized and be able to manage multiple projects at once. We are looking for someone who works well within many teams and has the ability to take the lead when necessary; the ideal candidate is someone with a strong sense of personal aesthetic that is complementary with AvroKO's design ethos. CORE RESPONSIBILITIES Design + Documentation + Delivery • Support studio teams in creating furniture and lighting designs, tasks include;, • Detailed hand sketching for concept development, • AI prompting for 3D designs & renderings, • 3D modeling in Solidworks & Rhino, • Rendering in Solidworks, V-Ray or Keyshot, • Creating technical, design drawings, • Image research, materials and furniture component sourcing etc., • Comprehensive file management, • Maintaining project schedules, • Attending regular internal/external meetings, • Understanding and advising on budgets, • Reviewing shop drawings, • Working with fabricators to develop designs, • General construction administration Supporting AvroKO’s product division - HOST • Assisting our dedicated HOST staff in, • Communication and visits with fabricators, • Oversight of shop drawing management, • Maintaining project schedules Resumes without portfolios will not be reviewed. Please upload your portfolio via "Upload Additional Files." Requirements: • Bachelor's degree in Furniture Design, or Industrial Design preferred, • A minimum of at least five (5) years postgraduate experience at an architecture or interior design firm, hospitality design experience preferred, • Fluency in Solidworks & Rhino required. Experience with Keyshot is a plus.., • Fluency in all Microsoft Office, Adobe Creative Suite (Photoshop, Indesign, and Illustrator) required., • Basic working knowledge of AutoCAD, and Sketchup required to collaborate with interior designers and architects, • Excellent communication skills required, • Fabrication experience is a plus, • Must be legally able to work in the US, • Must be available to join the team in 2-4 weeks, • The base salary range will be estimated between $80,000-$100,000 plus benefits and contingent on relevant experience and abilities Life at AvroKO At AvroKO, we are dedicated to hiring a diverse workplace that celebrates an inclusive culture and a sense of belonging. As an equal opportunity employer, we do not discriminate in employment on the basis of race, color, religion, sex (including pregnancy, gender identity, and gender expression), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, retaliation, parental status, military service, or other non-merit factors. AvroKO is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or accommodation due to a disability, you may contact us at hrmanager@avroko.com. We encourage employees to lead a life reflective of our hospitality mission and provide opportunities for team outings, and curated design events. Our benefits include medical, dental, vision, 401k matching, flex spending, life insurance, yearly professional development reimbursement, paid holidays, paid birthday, and paid time off.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Training & development, • Vision insurance, • 401(k), • 401(k) matching, • Dental insurance, • Employee discounts, • Flexible schedule WAGE RANGE: $17.50-$20.50 PER HOUR The Resale Revolution Starts With You! As a Crossroads Buyer, you will bring our brand promise to life: to offer a fun, fashion-centered, and affordable shopping experience to our communities. You’ll hand select items to sell in our stores and provide a high-level of customer service. You’ll get customers excited about shopping and selling second-hand fashion, whether it’s their first time or their 1000th! Minimum Requirements: • Must be able to work a minimum of 12 hours per week., • 6+ months of retail experience., • Have a good eye for fashion and current trends., • Must be authorized to work in the United States.When you join Crossroads, you are joining the sustainable fashion movement and reshaping fashion culture. And you aren’t just impacting the planet’s future- you are impacting your own., • We have clear paths for promotion and several routes you can take as you embark on your second-hand retail journey., • You’ll learn how to run a second-hand business– you’ll embody an entrepreneurial spirit- learning everything from buying, merchandising and inventory practices to gaining and maintaining the trust of a customer base who has been devoted since day one. You are:, • A Team Player. You are as enthusiastic about the success of others as you are about your own success., • Authentic. You are your unique self!, • Fashion-focused. You eat, breathe, and sleep style. Fashion is life., • Adaptable. You feel comfortable adjusting to changing circumstances and encourage your teammates to do the same. We problem-solve together!, • People-first. You are energized by people. You radiate kindness and positivity! You understand your impact and are someone who uplifts others. You will:, • Engage. You get to meet new people, every day! Greet each customer with a smile and welcome them to our store. Create a welcoming, fun, and inclusive environment to shop and work in., • Ask and Educate. You will teach our customers how we work and get them excited about selling their clothes to us!, • Have Integrity. You will act with integrity in words and actions- do the right thing and do it right, even when it’s difficult., • Be Compassionate. You will embody our core values of service, inclusion, and education. It’s important that we connect with all customers and try our best to help them., • Be Reliable. You will show up to work on time and ready to go!, • Be Flexible. You understand that needs change and evolve throughout the day- you know how to support your team and customer as needed., • Enjoy Organizing. Cleaning, organizing, and merchandising are all parts of the job and help create the best possible shopping and working environment.Perks: Health + Wellbeing We will: • Support your wellbeing. We care about our employees holistically and offer sick paid time off., • Prioritize wellness for all. We offer medical, dental, and vision insurance for ALL employees who work at least 20 hours a week! Work/Life Harmony We will: • Give you incentives when you work during the holidays. We pay time and a half on select holidays throughout the year, and we are closed on Thanksgiving and Christmas., • Encourage work/life balance. We offer flexible scheduling so that you can meet work & life needs!Financial Health We will: • Contribute to your 401(k). Free money? We’ll match up to 4% of your contribution as soon as you enroll & an additional discretionary 2% at year-end! We offer both a Roth and traditional 401(k)., • Offer a generous discount on all merchandise including luxury consignment pieces- shop where you work!, • Be Transparent. We have clear pay ranges and always advertise pay for positions. We believe in pay equity., • Offer Earned Wage Access. Need money before payday? You’ll be able to access pay as you earn it through our partner app ZayZoon, • Contribute to Commuter Benefits. Take public transit? We’ll contribute and match a portion of your commuter account monthly. Growth + Development We will: • Let you take the lead. We offer clear paths for growth and ongoing professional development that are straightforward and attainable., • Celebrate with you. We’ll provide you with many opportunities to bond with your team as you celebrate successes together., • Equip you with the tools to be successful. As you onboard & throughout your career, our training programs will set you up to win.About Crossroads One of the first companies to pioneer secondhand clothing as an alternative to traditional retail, Crossroads Trading has been buying, selling, and consigning name brand and designer clothing in a friendly, fun, and fashionable atmosphere since 1991. Since opening the doors of its first location in the heart of San Francisco’s Fillmore District, Crossroads has expanded over time to 38 retail locations spanning Northern and Southern California, Chicago, Seattle, Portland, Denver, New York, and Houston. And in recent years, we have added Sell-By-Mail and Concierge programs to provide convenient new ways for fashionable and eco-conscious customers to sell their gently used clothing. Crossroads has been featured in Harper’s Bazaar, Teen Vogue, and LA Mag, and is widely recognized as an industry leader in the ‘resale revolution.’ If you like sustainability, fashion, and working in a fun, positive environment, you’ll enjoy a career with us!

About Us Perform Properties is a Blackstone Real Estate portfolio company focused on high‑performing retail and office properties with people‑appeal - vibrant spaces where people actively choose to work, shop, and gather. With expertise in transactions, development, leasing, and management, we oversee approximately 30 million square feet of properties across the U.S. Our culture is built on our OneTeam foundation - a shared commitment to collaboration, innovation, and knowledge sharing across roles, teams, and time zones. Guided by this foundation, our OneTeam Core Values define how we show up every day: · Act with Intention · Make It Happen · Raise the Bar · Stay Curious · Win as One Join a team where performance and partnership go hand in hand. Essential Job Functions Own the strategy & roadmap across Leasing, Finance, and Tenant Engagement platforms to actively reduce our Coordination Tax Drive Configuration, Integration & Enablement initiatives that further reduce our Time-to-Productivity Champion AI, Automation & Agentic capabilities across all Enterprise Applications to reduce our Time-to-Insight Collaborate with stakeholders, partners & vendors to drive cost-effective, value-driven investment in our platforms Model the successful use of AI as a capabilities & resource extension, not just a gimmick Grow individuals & teams of technologists in the Enterprise Applications space as their leader Qualifications and Technical Competencies • 7-10+ years leading Enterprise Application (CRM, ERP) management, implementation and / or operations teams, • 3-5 years managing agile projects (Scrum, Kanban, SAFe), • 1-3 years managing people (direct reports), • Demonstrable success delivering platform implementations and ongoing administration for CRE Leasing platforms (Salesforce Sales Cloud, VTS Leasing, Yardi Deal Manager or equivalent), • Demonstrable success delivering platform implementations and ongoing administration for Property Accounting platforms (MRI, Yardi or equivalent), • Demonstrable success launching & operating Tenant Engagement platforms (Cove, VTS Rise, or equivalent), • Working knowledge of platform & foundational data integration patterns and middleware (Azure Databricks, Azure Data Factory, Snowflake platform), • Experience driving AI-enabled automation and MCP interaction with enterprise platforms (e.g. Claude Enterprise, Microsoft Copilot M365, Salesforce Flow / Agentforce, Yardi RPA, or equivalent), • Bachelor’s Degree in Computer Science, Information Systems or relevant tertiary education Benefits & Compensation Benefits: The Company provides a variety of benefits to employees, including health insurance coverage, retirement savings plan, paid holidays and paid time off (PTO). Base Salary Range: $231,000 - $253,000. This represents the presently-anticipated low and high end of the Company’s base salary range for this position. Actual base salary range may vary based on various factors, including but not limited to location and experience. The additional total direct compensation and benefits described above are subject to the terms and conditions of any governing plans, policies, practices, agreements, or other materials or documents as in effect from time to time, including but not limited to terms and conditions regarding eligibility. Closing EEO Statement Our company is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our employment decisions are based on individual qualifications, job requirements and business needs without regard to race, color, marital status, sex, sexual orientation, gender identity and/or expression, age, religion, disability, citizenship status, national origin, pregnancy, veteran status and or any other legally protected characteristics. We are committed to providing reasonable accommodations, if you need an accommodation to complete the application process, please email recruiting@performproperties.com #LI-Onsite

Job Description Kia City of the Bronx in New York, NY, is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Automotive Service Technician. This position is part of the Kia Veterans Technician Apprenticeship Program (VTAP), a structured apprenticeship program created by Kia America to help Military Veterans transition into the automotive industry. Through this program, participants gain hands-on dealership experience while completing a one-year competency-based apprenticeship that leads to Kia Service Technician certification. VTAP provides Veterans the opportunity to work full-time at a participating Kia dealership while receiving the training, tools, and support needed to develop into highly skilled automotive technicians. The program is GI Bill® approved, allowing eligible Veterans to receive Monthly Housing Allowance (MHA) during their apprenticeship. As an Automotive Technician Apprentice, you will work alongside experienced technicians and service professionals while developing the technical knowledge and practical skills necessary to diagnose, service, and repair Kia vehicles. Job Responsibilities • Diagnose, maintain, and repair Kia vehicles, including engines, transmissions, steering, suspension, brakes, HVAC, and electrical systems, • Perform vehicle inspections, diagnostics, and mechanical repairs using Kia diagnostic procedures and equipment, • Complete repair orders and warranty documentation according to Kia and dealership policies, • Test drive vehicles and verify repair quality using appropriate diagnostic tools and equipment, • Communicate effectively with service advisors and shop foremen to ensure a positive customer experience, • Maintain a safe, organized, and efficient work environment while following dealership safety procedures Requirements • Honorable Discharge from U.S. Military Service, • Valid driver’s license with a clean driving record, • Prior experience in a mechanical or technical field, • Strong troubleshooting and diagnostic skills, • Ability to work in a fast-paced dealership service environment, • Willingness to complete background check and drug screening Preferred Skills (Not Required) • Basic automotive maintenance or repair experience, • Familiarity with diagnostic tools and hand tools, • Experience working with engines, electrical systems, or mechanical equipment, • ASE certifications or technical training (a plus) Benefits Kia VTAP Apprenticeship Highlights • Full-time employment with a participating Kia Retailer, • A program designed specifically for Military Veterans, facilitated by Veterans, • Participation in a one-year, competency-based GI Bill®-approved apprenticeship leading to Kia Service Technician certification, • Eligible Veterans may receive a Monthly Housing Allowance (MHA) through the GI Bill® during the apprenticeship

Job Description About Us: Transition Management ('TMC') is recognized for delivering industry-leading Labor Provision and Project Management Services at some of the most renowned resorts across the United States. TMC has a rich history of providing its services at iconic locations such as The Baccarat Hotel and Residences in New York City. We are currently seeking a Maintenance Engineer to partner with our engineering team at a client location. Position Title: Overnight Watch Engineer Reports To: Chief Engineer FLSA Status: Non-Exempt Essential Responsibilities • Repair miscellaneous gas, electric, and steam appliances., • Keep all shop machinery clean and neat at all times., • Must have basic knowledge of power tools., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Monitor and inspect boiler equipment, valves, gauges, etc., • Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment., • Diagnose malfunctioning electrical systems, apparatus, and components., • Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures., • Follow all company and safety and security policies and procedures; and report safety hazards, accidents, or injuries; complete safety training and certifications., • Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets., • Welcome and acknowledge all guests according to company standards and anticipate and address guests' service needs., • Perform small to medium size repairs on mechanical piping and equipment including but not limited to relief valves, safety valves, and miscellaneous fittings., • Grasp, turn, and manipulate objects of varying size and weight., • Reach overhead and below the knees, including bending, twisting, pulling, and stooping., • Move up and down stairs, service ramps, and/or ladders., • Perform other reasonable job duties as requested by Supervisors., • Develop and maintain positive working relationships with others, support the team to reach common goals, and listen and respond appropriately to the concerns of other employees. Requirements: • Resort/Hospitality experience preferred, • Q1 License a Must, • FSD License a Must, • Possesses general repair skills such as plumbing, painting, carpentry, electrical, and other general repair skills, • Displays skill in the safe use of hand and power tools, along with other materials required to perform repair and maintenance tasks, • Works well within a variety of situations, • Solves problems using facts and professional judgment, • Reacts quickly and decisively in emergencies that may involve valuable equipment or the safety of others, • Works well within a diverse team in the execution of duties, • Able to prioritize and change from one activity to another easily, • Be available on nights, weekends, and holidays, • Must be well-groomed and in proper uniform while on duty Some of the duties of this position may change based on the business's needs. Physical Demands Lifting 50 lbs. maximum with frequent lifting and/or carrying of objects weighing up to 25 lbs. It requires moving, standing to a significant degree, reaching, ascending, handling, feeling, communicating, conversing, exchanging information, and identifying and observing. *Transition Management is an equal opportunity employer. Qualified candidates are considered for employment without regard to race, religion, gender, gender identity, sexual orientation, national origin, age, military or veteran status, disability, or any other characteristic protected by applicable law.* Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Parental leave, • Retirement plan, • Vision insurance Hourly rate $33—$36 USD

Job Description Production Estimator The Factory NYC is a custom fabrication and production company in Brooklyn. We build physical things for clients and we install them: museum exhibits, brand activations, luxury retail environments, public art, architectural millwork, and one off pieces that do not have a category yet. The deliverable is the built object, on site, on the date the client contracted for. We are hiring a Production Estimator to own what the work costs to build. Job Summary You take a defined scope and produce the cost of building it: the labor by trade, the materials, the machine time, the vendors, the install and strike, and the risk you price in. That number is the foundation the company's pricing is built on and the basis the shop works to. You cost the work. You do not price the client, and you are not asked to trim hours to reach a number somebody else needs. That separation is deliberate here and it is protected. You also judge whether the work can be built the way it was drawn, in the time available, with the capacity we have, and you say so early when it cannot. Feasibility and capacity risk are yours to identify and escalate. The work is varied. Very little of what we build is something we have built before in exactly that form, so the job is closer to reasoning about how a thing gets made than to pulling unit prices off a sheet. You will report to the Director of Production and work alongside our lead estimator, who you will learn our methods and our cost history from. This is a full estimator seat, not a junior one. The bids assigned to you are yours. Basic Duties and Responsibilities • Review drawings, specifications and scope, and send back what is not defined well enough to cost honestly., • Break a scope into what actually gets built and what each trade will spend on it, with a reason behind every number., • Decide how the work gets built: sequencing, material selection, fabrication approach, and where a vendor or a subcontractor is the better answer than building it in house., • Cost materials, machine time, vendor scope, logistics, installation and strike., • Read the hours you have written against what the shop can carry, and raise bottlenecks and schedule risk to the Director of Production while there is still time to act on it., • Take the build approach to the department managers on the larger jobs so the people who will build it have pressure tested the method before we commit to the number., • Cost change orders with the same rigor as the original estimate, and turn them around inside the deadline the job needs., • Hand the estimate to production and walk it with them, so the shop starts from what you actually intended., • Build and maintain the estimating library and the record of what completed jobs really cost, and keep both current against real production results., • Reconcile estimated against actual on every job you price, work out what drove the variance, and change the next estimate because of it. What we are looking for • Seven or more years estimating in custom fabrication, scenic production, construction or a comparable build environment, • Real knowledge of fabrication across more than one trade: carpentry, metalwork, finishing, assembly, and the machine side of CNC and digital fabrication. You know what a method costs in hours because you have watched it happen., • The ability to read drawings, models and specifications, translate them into a buildable method, and catch what a drawing has not resolved before it gets priced., • Judgment about capacity, department workload and lead times, and the willingness to say a schedule will not hold., • Experience costing materials and vendor scope, and holding a vendor's number to what it was quoted against., • Comfort working inside a proper production and quoting system rather than a spreadsheet on your desktop. We run a connected toolset and we use AI tooling in the estimating workflow. You do not need to have used ours, but you should want to work this way rather than around it., • Organization enough to carry several bids on different deadlines without losing the detail on any of them, and communication clear enough to work with account management, project management, drafting, the shop floor and vendors in the same week., • Bachelor's degree in engineering, construction management, industrial design or a related field preferred. Extensive hands-on fabrication and production experience is considered in its place. Nice to have Estimating across mixed trades in one shop rather than depth in a single one. Time actually spent on a shop floor. Experience building or maintaining an estimating library and reconciling it against completed jobs. Installation and strike estimating, including site conditions, access and crew size. Reading a drawing package well enough to mark it up, in AutoCAD, Rhino, SketchUp or comparable. Enough awareness of CNC and additive manufacturing to estimate machine time separately from the labor around it. The details This is and full-time and in person position, core hours 8:00 a.m. to 5:00 p.m., with extended hours when a bid deadline call for it. Primarily indoors. Benefits: percentage stipend toward medical, vision and dental. Paid time off. Savings incentive match plan for employees. Compensation is discussed based on experience and qualifications. See what we what we build at www.thefactorynyc.com

Job DescriptionCompany Description Eataly is the world’s largest artisanal Italian food and beverage marketplace! Eataly is not a chain; each Eataly is different, with its own character and own theme – but all with the same aim... for our guests to: • EAT authentic Italian food at our restaurants, cafés and to-go counters, • SHOP a selection of high-quality Italian, local and homemade products, • LEARN through our classes and our team’s product knowledgeJob Description The Beverage Stocker is responsible for the receipt and storage of all beverage items, supplies, materials, and equipment received. Directly reports to the Beverage Manager. • Checks incoming merchandise against order sheets for accuracy of weight, quantity, and order specifications., • Ensures beverage items are received and stored at the proper temperatures., • Maintains product by stocking, replenishing, facing, and adhering to First In First Out standards., • Ensures all shipping invoices are submitted to the receiving team., • Maintains inventory and delivery records for the team., • Issues stored items to proper departmental personnel and keeps records of release of items., • Notes any and all discrepancies and immediately informs their supervisor., • Performs other duties as required or assignedQualifications, • High school diploma or equivalent preferred, • Good communication skills, • Previous stocking experience in a grocery setting preferred Job Requirements • Availability to work onsite with a flexible schedule of 9 am - 3pm with at least weekend day, • Ability to exert well-paced mobility for up to 8 hours, including standing, walking, bending and squatting, • Ability to lift up to 50 pounds, • Ability to use hand truck, cart, box cutter, ladder, label maker and cleaning supplies Compensation: The base pay range for this position is $17 - $19 per hour. Additional Information Benefits and Perks • Medical, Dental, Vision Insurance, • Paid Time Off, • Paid Parental Leave, • 401K with match or RRSP, • Bonus program, • Free family meal daily, • Discounts at Eataly, • Classes on products and Italian cuisine, • Referral bonus program, • and more! Eataly is an equal employment opportunity employer. It is the Company’s policy to not unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, religion, national origin, age, disability or any other characteristic made unlawful to consider by applicable federal, state, or local laws. Eataly also prohibits harassment of applicants and employees based on any of these protected categories. It is also Eataly’s policy to comply with all applicable federal, state and local laws regarding consideration of unemployment status, salary history, credit/bankruptcy history and criminal background/conviction history in making hiring decisions. If contacted for an employment opportunity, please advise Human Resources if you require accommodation.

We are looking for energetic and enthusiastic Maintenance Associates to join the Equinox team. This is a great position for a candidate looking to make a significant impact in a growing and dynamic organization based in a state-of-the-art, luxury facility at Bond Street. Job responsibilities include but are not limited to the following: • Ensure that the club and exercise equipment are clean and well maintained while providing all members, prospective members, and guests with excellent customer service, • Ensure that the sidewalk entrance and lobby are presentable, • Clean the locker room and stock all locker room consumables, • Clean and organize storage, laundry, exercise, and coat rooms, • Maintain an adequate supply of towels on the exercise floor, • Provide maintenance for all equipment, • Receive and store all deliveries, • Assist with special events, • Notify the Housekeeping Manager when any rooms or equipment need immediate attention The successful candidate must have the following experience, skills, and education: • Must possess a clear understanding of what constitutes a clean and sanitary environment, • Prior experience in cleaning and laundry services is highly preferred, • Ability to service athletic equipment, along with previous experience working with cleaning products and hand tools, • Strong customer service, organizational, communication, and multi-tasking abilities Pay Transparency: $17.00/hr As a member of the Equinox team you will receive: • We offer competitive salary, benefits, and industry leading commission opportunities for club employees, • Complimentary Club membership, • Perks and incentives with our products and services including Personal Training, Pilates, Spa and Shop This job description is intended to describe the general requirements for the position. It is not a complete statement of duties, responsibilities, or requirements. Other duties not listed here may be assigned as necessary to ensure the proper operations of the department.

Job Description Our client, a financial institution located in the financial district is seeking a long term full time Mailroom Associate to joing their growing team. Monday-Friday 7a-4p flexible for 8a-5p. $30.00-$32.00 per hour Must be able to tracvel to their East Rutherford, NJ location as needed. Job Description: • Mail & Material Handling Ability to sort, bundle, label, and distribute mail and printed materials accurately while following routing rules, deadlines, and security procedures. Attention to detail is critical to avoid mis delivery or reprints. • Equipment Operation & Basic Maintenance Hands-on skill operating mail processing equipment (postage meters, scanners, inserters) and print shop machinery (digital printers, cutters, folders, binders). Includes clearing jams, changing supplies, and identifying mechanical issues early. • Quality Control & Inspection Ability to physically inspect mail pieces and printed products for defects such as misprints, incorrect addresses, poor alignment, or damaged items—ensuring compliance with postal regulations and print standards before release. • Manual Dexterity & Safety Awareness Strong hand-eye coordination for tasks like feeding machines, trimming, packaging, sealing, and palletizing materials, while consistently following safety procedures, PPE requirements, and ergonomics to prevent injury. • Time Management Under Production Pressure Skill in physically managing workflow during peak volumes—prioritizing urgent jobs, meeting cutoff times, and maintaining productivity without sacrificing accuracy or safety. Experience using systems like: • USPS, FedEx, UPS shipping platforms, • Internal tracking tools (like BearTracks or similar) Must be able to lift up to 40 lbs Be well versed with MS Office

Job Description A Retail Store Manager, or Shop Manager, is responsible for facilitating and supervising daily operations at a store to make sure that employees work together effectively to make sales and contribute to shop upkeep. Their duties include communicating with vendors about inventory orders, scheduling employee shifts and training new employees.Retail Store Manager duties and responsibilities A Retail Store Manager is responsible for managing a retail store, which includes overseeing sales, staff and inventory. Retail Store Managers have the following duties and responsibilities: • Supervise, train and assist employees like Sales Representatives and Retail Store Clerks in customer service, store maintenance and product promotions., • Develop and maintain a schedule for employees and promotions centered on holiday sales and other cycles., • Seek ways to better promote the store, the product line and service within the store., • Maintain proper inventory levels, ensure stocking, implement purchasing plans and maintain contact with suppliers to ensure maximum efficiency in meeting sales goals., • Implement cross-training of employees and Assistant Managers to maintain productivity at all times., • Manage all controllable costs with a view to maintaining profitability., • Ensure the store remains clean and presentable at all times., • Hire and train as needed to ensure adequate personnel is on hand to provide outstanding customer service. Required Qualifications: • 3+ years of demonstrated consistent retail sales/customer service experience (fashion/apparel retail experience preferred), • Experience in a Store Manager, or a Team Supervisor role, • Excellent leadership skills and the ability to work with teams, • Open availability (Opening and/or closing shifts, weekends, Holiday seasons), • Good communication and interpersonal skills towards customers, staff members, Company Leadership, Human Resources & Area/Zone managers, • Excellent problem-solving capabilities, with the ability to work well under pressure, • Must have a reliable mode of transportation upon first date of employment to complete trips to the Bank to submit deposits, • Great attention to detail for purposes of erecting attractive marketing displays, arranging merchandise and maintaining store appearance, • Ability to lift heavy merchandise, walk and stand for long hours

Job Description We are looking for a talented Diesel Technician to join our growing Fleet Maintenance Department at our Bronx, NY shop. Why Pyle? • Pay Rate: $30.00 - $45.00 per hour based upon experience and skillset, • $5.00 per hour shift differential, • 11:00 PM start time, Sunday through Thursday, • Weekly pay, via direct deposit; annual benefits and paid time off, • Overtime pay after 40 hours, • Company-funded Tool Reimbursement Program Simply put, when it comes to getting the job done, Pyle People Deliver. A family-owned and operated business since 1924, Pyle believes in providing you with the resources and stability to succeed. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Your main responsibilities will include, but are not limited to: • Performing routine preventative maintenance and repairs to heavy duty trucks, • Troubleshooting and performing repairs to brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required Your Benefits will include: • Medical, Dental, Vision, and Life Insurance, • 8 paid annual holidays; paid vacation & personal time off, • 401(k) with company match; annual profit sharing, • Weekly pay via direct deposit To be successful in this role you will need to have the following: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for a heavy duty truck technician, • Vocational or Technical Training in diesel or heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Ability to work independently with a “can-do” attitude Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Milea Isuzu Trucks of The Bronx, New York is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job DescriptionThis position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$28.00/hrMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description A. Duie Pyle is looking for an experienced, skilled 2nd shift Diesel Technician to join our Fleet Maintenance team at our Maspeth, NY shop. Why Pyle? • Pay Rate: $30.00 - $45.00 per hour based upon experience and skillset, • Weekly pay, via direct deposit; annual benefits and paid time off, • $3.00 per hour shift differential, • 3:00 PM start time, Monday through Friday, • Overtime pay after 40 hours, • New, modern equipment to work on in clean shops, • Company-funded Tool Reimbursement Program Simply put, when it comes to getting the job done, Pyle People Deliver. A family-owned and operated business since 1924, Pyle believes in providing you with the resources and stability to succeed. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Your main responsibilities will include, but are not limited to: • Performing routine preventative maintenance and repairs to heavy duty trucks, • Troubleshooting and performing repairs to brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required Your benefits will include: • Medical, Dental, Vision, and Life Insurance, • 8 paid annual holidays; paid vacation & personal time off, • 401(k) with company match; annual profit sharing, • Weekly pay via direct deposit To be successful in this role you will need to have the following: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for a heavy duty truck technician, • Vocational or Technical Training in diesel or heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Ability to work independently with a “can-do” attitude Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Frank's Isuzu Truck of Lyndhurst, New Jersey is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Salary Range $17.50 - $27.50 Hourly Position Type Full Time Category Retail The Sales Lead is a crucial role for the store with a passion for client service and an expertise in fashion always representing the Oniverse Key values: Open Mind, Passion, Pragmatism, Teamwork and Goal Orientation. Life Of The Sales Lead The Sales Lead focuses on providing a superior level of customer service to clients, while increasing conversion and retention, to drive business revenue and inspire brand loyalty. The Sales Lead will work together with the team and reports to the Boutique's Manager. The Sales Lead will focus on the development of new clients, converting walk-in traffic into Calzedonia ambassadors by creating excitement and desire around the product, sharing customized fashion tips and providing high-level of professionalism. The Sales Lead role requires a positive, goal oriented, outgoing and engaging personality, always taking the first step to engage with clients. The Sales Lead demonstrates high level of skill to interact with the clients and identify their needs that will potentially maximize their sales commissions every week. Be a mentor for your Teammates! You always demonstrate Oniverse's Key Values: Open Minded, Authentic, Passionate, Dynamic, Team Player, Pragmatic! Open Minded: Open to learning and receiving guidance and feedback from store leadership. You embrace new ideas, are receptive to customer feedback, and approach challenges with a willingness to explore innovative solutions. You understand the diverse needs and preferences of guests and colleagues, fostering an inclusive and welcoming atmosphere within the store. You actively engage with guests, adapt to ever-changing trends, ensuring a personalized shopping experience. Authentic: Be real! Honesty is key and always working together with integrity. Sales Leads embody genuineness and sincerity. You enjoy authentically connecting with guests, sharing your passion for the brand while fostering loyal and long-lasting relationships with guests and colleagues. #WeAreOne We support and encourage a respectful and inclusive team atmosphere by welcoming Diversity, Inclusion and Equity for all team members and guests. Passionate: Share your excitement and promote brand loyalty with guests and store team. As a Sales Lead, you have firsthand experience with new fashion collections and can share newness with all guests. Share your passion for Intimissimi by building brand loyalty with each guest! Your goal is ensuring each guest has a memorable experience in our shops. Dynamic: Sales Leads thrive in a fast-paced environment, embracing change and adaptability. You will be able to navigate busy hours, responding with care to guests' inquiries and requests, supporting with visuals updates, assisting with stock management practices, and overall contributing to a seamless shopping experience for guests and efficient environment for colleagues. Team Player: We are all in this together! Our Sales Leads believe in teamwork through all day-to-day activities to ensure high quality experience for guests but also supporting each other every step of the way. You collaborate effectively with colleagues, fostering a positive and cooperative atmosphere in the shop. Being part of Calzedonia means lending a helping hand to colleagues, being a mentor for new colleagues, creating a unified and motivated network that delivers high quality guest experience. Pragmatic: You are a problem solver! You approach challenges with practicality and resourcefulness, finding effective solutions together with your colleagues and store leadership that align with the store's goals and guests' needs. Always balancing creativity and efficiency, while following company policies and procedures. • Build genuine relationships with clients through thoughtful and consistent outreach, • Demonstrate a positive and proactive attitude in every situation to constantly raise the level of service provided and consistently exceed client expectations, • Demonstrate strong verbal and written communication, • Be responsible of capturing customers' information using multiple means to communicate, utilizing phone and written follow-up contact, • Client Book Management including follow up with clients regarding their shopping experience, potential inquiries such as product care instructions, • Achieve and exceed personal sales and productivity goals agreed upon with your Store Manager, • Demonstrate a full knowledge of the product including benefits to maximize the sales opportunity, • Utilize your fashion expertise to inspire others and build collaborative partnerships in a team-focused environment, • Supporting managers in maximizing efficiency in executing standard in-store operations, such as daily replenishment and processing of seasonal markdowns, • Partnering with the Manager to leverage knowledge of internal systems to conduct business analyses and keep track of both store and individual KPIs, • Supporting managers in maintaining the visual and housekeeping standards of the store, • Able to successfully operate our POS system, conduct email, opening and closing procedures, • Store Cleanliness: At our stores, we take great pride in providing our customers with a clean and well-maintained shopping environment. This includes the cleanliness and organization of the store: including but not limited to the salesfloor, fitting rooms, cash desk area, and backroom areas such as bathroom and stockroom. As a retail employee, you are expected to take the initiative of upkeeping the cleanliness in the store. Teams will be required to conduct daily cleaning tasks included but not limited to:, • Dust and clean shelves, furniture, fixtures and decor, • Clean doors, window glass, mirrors (exterior and interior), • Pick up and empty trash cans and garbage taking it to the dumpster as needed, • Sweep and mop hard floors, • Wipe and sanitize sinks, countertops, shared common areas and equipment, • Report directly to Assistant Manager and Store Management to ensure clients experience high quality customer service, completing store operations efficiently and implementing sales strategies thus meeting and exceeding commercial goals, • Provides training to new teammates which may include cross-department functions, • Based on your experience with Calzedonia and performance, you may be selected to support New Stores Openings across the US as a team bonding opportunity and a chance to put your skills and knowledge to the test!, • Participate in nationwide contests within other Calzedonia locations to show our team spirit! All Sales Leads get the chance to learn new skills daily. We believe in hands-on experience training in different store functions to develop an entrepreneur mindset and spirit, such as: Guest Experience, Basic Store Operations, Business Acumen, Visuals Merchandising, Stock Management, and much more! We are all team players! Our leaders always encourage development between team members to support professional growth. Share your knowledge and experience with new team members! We strongly believe in consistent training and development of our teams. Many of our success stories started their careers from being part of our store teams and have grown to be future Store Managers, District Managers, Sales Directors and beyond! Be a part of the Oniverse story and make your mark! • Eligibility to work in the US for any Employer, • High School graduate or equivalent, • Compensation based upon years of experience in customer service and sales, • 3 to 4 years of Contemporary Fashion retail industry is highly preferred, • High level standards of customer service and advanced knowledge of selling techniques, • Strong verbal and written communication skills, • Commitment, being self-motivated and goal oriented, • Problem solving, • You are able to work a flexible schedule, including nights, holidays and weekends, • You are a people person! Working with a team to accomplish store goals, genuinely enjoying an environment of fun music and building connections with our guests for the best shopping experience, • You are able to lift in excess of 20 pounds and stand for long periods of time, bend, stretch, for a short distance engage in repetitive motions, push, pull and carry items (mannequins, clothing, totes, torsos, etc.), • Base Salary plus monthly bonus based upon budget achievement, store volume and location., • Medical Insurance, • Pet Insurance, • Paid Time off, • Paid Parental Leave *Must meet eligibility requirements

Do you have years of experience painting large-scale advertisements and a desire to keep growing your craft? If so, you may be a perfect fit for our Mural Painter role in Brooklyn, New York! We're looking for seasoned painters with hands-on experience in the Out of Home industryspecifically working with oil-based enamels and brushes at scale. This role is for those who thrive in a fast-paced, team-driven environment and are passionate about passing down knowledge to the next generation of wall dogs. At Colossal Media, you'll join a paint team committed to technical excellence, collaboration, and continued growthboth as a group and as individual artists. If you're ready to contribute to some of the most iconic hand-painted advertisements in the world, while enjoying year-round work and the best benefits in the industry, we want to hear from you! The Purpose of the Mural Painter is to: Collaborate with our experienced paint team to execute hand-painted murals from our home base in NYC. Share your skills and knowledge to help train up-and-coming painters. Represent Colossal Media with professionalism on every wall, job site, and client interaction. Contribute to a team that sets the standard for the painted Out of Home industry. Colossal Media, an award-winning Brooklyn-based company and now a subsidiary of Lamar Advertising, is dedicated to reviving the art of hand-painted outdoor advertising. Founded in 2004, we've grown into a premier creative partner for the world's largest brands, agencies, and artists. Our memorable campaigns build curiosity and amplify exposure through dynamic storytelling, redefining and elevating the out-of-home experience. Explore our website and Instagram to see our campaigns come to life, and check out this article from our friends at Better Letters for more insight. With a vision for rapid growth, we're looking for passionate individuals to help us make it happen! Colossal Media is built on the craft of hand-painted murals. This craft has creativity at its core. Here we know that what fuels creativity is diversity. People from all walks of life work here at Colossal Media and all are not only welcome but are treated equitably within the Colossal Media community. What you can expect from us: Job title with an hourly rate ranging from $27 - $52.50/hour, based on relevant experience and qualifications. Final compensation is determined at the conclusion of the interview process. 120 hours of paid time off (PTO) that increases with tenure 12 paid company holidays, including President's day and Juneteenth A comprehensive week training program Career advancement opportunities Ongoing professional development and internal leadership programs to maximize your career potential Multiple medical plan options and health savings account Hospital, Critical Illness, and Accident coverage Short & long-term disability and paid parental leave Employee Stock purchase plan 401k plan with company match Wellness program incentives such as medical plan premium holidays and HSA contributions A Day in the Life: The Mural Painter position works within our paint team to execute walls from either a home base in NYC. Painting, prepping job sites, coating out, blending, mixing, applying, and cleaning of wall spaces. Understand and execute measuring protocols, job site organization, packing and shipping of gear, pattern training, pouncing, artwork acetate, and rigging support, amongst others Product application as it applies to Graphic, Complex Graphic, Non-Organic, Complex Non-Organic, Organic, and Complex Organic creative Responsible for troubleshooting in the field and on job sites Responsible for safely working with a team. Ability to teach and support in workshops/non-media training when applicable. Represent Colossal in a confident and professional manner. Be on-site and/or on-call during scheduled times, this may include working nights/weekends. Appropriately document all services performed: Slack channels, bulletins, job communications (including feedback on team members and job operations), and daily communications. Drive company vehicles. Operating Boom and Scissor Lifts. Adhere to our social media policy. Consent to the participation of interviews, the use of quotes, the taking of photographs, and video recordings while on-site or at the shop. Education and Experience Requirements: Valid driver's license and driving experience required. A high school diploma or equivalent is required. Successful completion of OSHA 30-Hour Construction course is required. Previous experience working at heights above ground level is preferred, but not required. 3+ years of out-of-home painting experience preferred. Extensive experience working with bulletin enamels medium and brushes. Naturally embody our pillars: Awareness, Curiosity, Leadership, Craftsmanship Position continually requires demonstrated poise, tact, and diplomacy To be considered, please provide the following: Resume Mural portfolio Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email recruiting@lamar.com. Physical Demands and Work Environment: The primary work environment for this position is outdoors, requiring the ability to work in adverse weather conditions and climb to heights over 200 ft. The physical demands for this position include heavy lifting (up to 100 pounds), extensive bending, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, driving, and climbing. Nights spent away from home traveling are no less than 25% of the time. On-call shifts may be required. Colossal Media is an EOE/AA: Disabled/Protected Veterans or any other State or Federally protected characteristic. Please note: Colossal Media/ Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment.