Trabajos shop supervisor en Newark, New JerseyCrear alertas

Job DescriptionThis position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$28.00/hrMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description Mendon Truck Leasing and Rental, a branch of PETIT FORESTIER GROUP, a full-service leasing and rental company and a leader in the refrigerated fleet market, is searching for full-time Class C Mechanics to work at our Bronx location. The schedule is Mon-Fri 3:30 pm-12 am. Full Time - Union Local 447 - $33.54/hour Under direction of a Supervisor, Lead Technician or a Class A Mechanic, a Class C Mechanic generally performs minor repairs and all aspects of preventive maintenance on all types of trucks and trailers (i.e., Industrial trucks, light duty truck tank truck, tractor, tank trailers, etc.) RESPONSIBILITIES: • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Assists higher level mechanics when and where directed., • Performs simple mechanical repairs as directed by the supervisor or mechanics to whom assigned., • Performs clean-up duties in the shop and yard areas as directed., • Secures parts and tools for mechanic to whom assigned as directed., • May be called upon, to perform any of to perform any of the lesser skilled jobs in the shop and yard area., • Performs other duties as directed. QUALIFICATIONS: • Must be able to obtain a CDL within 6 months after hire., • Demonstrated ability and experience performing the tasks outlined in the responsibilities detailed above with supervision on all types of trucks and trailers., • High school diploma or equivalent required., • Post-Secondary Degree, Technical Certification, or Vocational Certification is preferred., • Basic tools required., • Ability to communicate effectively., • Knowledge of computers to operate diagnostic test equipment and company software programs proficiently. WORKING CONDITIONS: • Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs., • This position requires driving company vehicles. Job Type: Full-time Work Schedule: Monday to Friday, 3:30 pm - 12 am Compensation: Hourly $33.54 ($69,763/year) Location: Bronx, NY Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Life Insurance, • Sick Time Off, • Vacations, • Holidays, • Birthday off, • 401(k)

Job Description East Group/ SalSon Logistics is seeking an experienced Diesel Mechanic / Heavy-Duty Truck Technician to join our Fleet Maintenance team. The Diesel Mechanic is responsible for diagnosing, repairing, inspecting, and maintaining our fleet of commercial trucks, tractors, trailers, and related equipment. This position plays a critical role in keeping our fleet safe, reliable, and on the road. We are looking for a hands-on mechanic who takes pride in their work, understands the demands of a fast-paced trucking operation, and can effectively diagnose and repair mechanical, electrical, air, brake, and other heavy-duty vehicle systems. Essential Duties & Responsibilities Diagnose, troubleshoot, repair, and maintain Class 8 tractors and other commercial fleet equipment. Perform preventive maintenance inspections and scheduled fleet maintenance. Diagnose and repair diesel engine and related mechanical issues. Inspect, diagnose, and repair air brake and braking systems. Diagnose electrical and electronic system problems using appropriate diagnostic equipment. Repair and maintain suspension, steering, cooling, exhaust, and air systems. Perform repairs to truck and trailer lighting and electrical systems. Diagnose and repair starting and charging systems, including batteries, starters, and alternators. Perform tire inspections and identify conditions requiring repair or replacement. Inspect and repair trailers, including brakes, lighting, suspension, doors, landing gear, and related components. Perform DOT-related vehicle inspections and identify safety defects. Complete preventive maintenance services, including oil changes, filters, lubrication, fluid inspections, and other required services. Respond to equipment breakdowns and assist with emergency repairs when necessary. Identify additional maintenance or safety concerns during inspections and communicate findings to Fleet Maintenance management. Perform road tests when appropriate to verify repairs. Use diagnostic software, scan tools, meters, and other equipment to troubleshoot vehicle systems. Complete repair orders and accurately document labor, parts, repairs, inspections, and services performed. Communicate parts and material needs to the appropriate supervisor or parts personnel. Maintain tools, equipment, and work areas in a safe and organized condition. Follow company safety procedures and applicable DOT requirements. Work closely with drivers, Fleet Maintenance, Operations, and other departments to minimize equipment downtime. Perform additional maintenance and repair duties as assigned. Qualifications Previous experience as a Diesel Mechanic, Diesel Technician, Fleet Mechanic, Truck Mechanic, or Heavy-Duty Technician preferred. Experience working with Class 8 tractors and commercial trucks strongly preferred. Knowledge of diesel engines and heavy-duty vehicle systems. Knowledge of air brake systems, suspension, steering, electrical systems, and preventive maintenance. Ability to diagnose mechanical and electrical problems effectively. Ability to read and understand repair manuals, service information, wiring diagrams, and diagnostic information. Ability to safely operate shop equipment, power tools, diagnostic equipment, and hand tools. Ability to work independently and as part of a fleet maintenance team. Strong troubleshooting and problem-solving abilities. Strong attention to safety and quality. Valid driver's license required. CDL is a plus but not required unless designated for specific job responsibilities. Preferred Qualifications Experience maintaining a large commercial trucking fleet. Class 8 tractor and trailer repair experience. DOT inspection experience. ASE certifications are a plus. Experience with computerized diagnostic equipment. Experience diagnosing aftertreatment and emissions systems. Experience with ABS, air brake, electrical, and electronic control systems. Welding and fabrication experience is a plus. Experience performing roadside or mobile repairs is a plus. Physical Requirements This position requires the ability to perform the physical duties normally associated with commercial truck and diesel repair, including: Standing, walking, bending, kneeling, crouching, and reaching throughout the workday. Working underneath and around commercial vehicles and equipment. Using hand tools, power tools, and heavy-duty shop equipment. Climbing into and out of trucks and accessing various areas of commercial equipment. Safely lifting and moving parts, tools, and equipment consistent with the requirements of the position, with assistance or mechanical devices when appropriate. Working in a shop environment that may include exposure to noise, grease, oils, fuels, exhaust, weather conditions, and moving equipment. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law. Key Skills Diesel Repair | Class 8 Trucks | Fleet Maintenance | Preventive Maintenance | Air Brakes | Electrical Diagnostics | Truck Repair | Trailer Repair | DOT Inspections | Heavy-Duty Equipment | Troubleshooting | Roadside Repair What We're Looking For We're looking for a mechanic who doesn't simply replace parts — we want someone who can diagnose the problem, determine the proper repair, and get the equipment safely back on the road. The right candidate will understand that in transportation, equipment downtime matters. You should be comfortable prioritizing repairs, communicating problems clearly, and working with the Fleet Maintenance team to keep SalSon's operation moving. About SalSon Logistics SalSon Logistics is a transportation and logistics company supporting a diverse commercial fleet and fast-paced transportation operation. Our Fleet Maintenance team plays an essential role in supporting our drivers, customers, and operations by keeping equipment safe, compliant, reliable, and ready for service. East Group Logistics is an Equal Opportunity Employer.

Job Description Under direction of a Supervisor, Lead Technician or an Class A Technician, a Class B Mechanic will assist in the repair and diagnosis on all types of trucks and trailers (i.e. industrial trucks, light duty trucks, tank trucks, tractors, tank trailers, etc.) including but not limited to gasoline and diesel engines, overhauls and rebuilding of transmissions and differentials, clutches, starters, alternators, refrigeration systems, air conditioning systems, power steering, electrical systems, wheels, tires, shock absorbers and brake systems, steering gear box, preventative (P.M.) maintenance and all associated component parts Responsibilities • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Ability to diagnosis and repair most truck and trailer breakdowns., • Be able to repair and rebuild engines with some guidance and direction., • Perform some of the less complicated repairs to transmissions, driveline, and differentials., • Possesses knowledge of and performs repairs to engine accessory components., • Has a general knowledge of, and general proficiency in the repair of steering, suspension, brake systems, frames, axle, electrical, hydraulic and refrigeration systems., • Works with the usual amount of supervision and direction. Requires assistance in unusual or complicated assignments., • Performs road service., • Performs other duties as directed., • Will need normal supervisory and instructional attentions. WORKING CONDITIONS: Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs.

Job DescriptionGlazing Installer Location: Orange, NJ Position Summary Our Client is seeking dependable and skilled Glazing Installers to install, repair, and replace glass, aluminum storefronts, commercial doors, and windows. The ideal candidates take pride in quality workmanship, follow safety procedures, and work effectively as part of a team. Our Client plans to start with two installers and evaluate the team’s needs as the business grows. Responsibilities Install glass, aluminum storefronts, curtain wall systems, windows, and commercial entrance doors. Measure openings and verify dimensions before installation. Read and interpret blueprints, shop drawings, and installation instructions. Install and adjust door hardware, including hinges, closers, locks, and panic devices. Apply sealants, glazing gaskets, weatherstripping, and waterproofing materials. Safely handle, transport, and position glass using appropriate equipment. Remove existing glass, frames, and doors while protecting surrounding surfaces. Inspect completed installations for alignment, proper operation, weather resistance, and appearance. Maintain tools, equipment, vehicles, and clean work areas. Follow company safety procedures and applicable jobsite requirements. Communicate material needs, field conditions, and installation issues to the supervisor. Qualifications Previous experience in glazing, commercial window installation, aluminum storefronts, or commercial door installation is preferred. Ability to safely use hand tools, power tools, measuring equipment, and glass-handling equipment. Strong attention to detail and ability to follow instructions. Reliable attendance, punctuality, and ability to work effectively with a team. Willingness to travel to assigned jobsites throughout the local area. Willingness to travel nationally for projects is a plus but is optional. OSHA 10 or OSHA 30 training is preferred. Valid driver’s license required if operating company vehicles. Physical Requirements and Work Environment The position involves standing, bending, kneeling, climbing, and working outdoors in varying weather conditions. Candidates must be able to perform essential job duties, including handling heavy or awkward materials with appropriate equipment and team assistance, with or without reasonable accommodation. Some assignments may involve working on ladders, scaffolding, or aerial lifts. Compensation and Benefits Hourly Pay: $22–$35, depending on experience, skills, and qualifications. Retirement Benefits: 401(k) plan. Travel Reimbursement: Available for qualifying work-related travel. Work Location: Orange, New Jersey, with local travel to assigned jobsites. Nationwide Opportunities: Optional travel for projects outside the local area.

Job DescriptionJob Title: Plumbing Service Technician - Emergency After Hours and Weekends Slot Company: Quix Plumbing Service Location: [Brooklyn / Queens / Bronx / NYC Area] About Quix Plumbing Service: Quix Plumbing Service is a fast-growing, service-focused plumbing company built around speed, quality, and customer experience. We’re not a “run 10 calls and go home” shop — we focus on high-value service, strong communication, and giving technicians the ability to earn well above industry average. If you’re a solid technician who knows how to diagnose, communicate, and close work, this is a high-income opportunity. What You’ll Do: • Run residential and light commercial service calls., • Diagnose plumbing issues and present solutions to customers., • Perform repairs, replacements, and installations., • Educate customers on options (not just quick fixes)., • Deliver a high-level customer experience that leads to repeat business and reviews. Compensation (Where This Role Stands Out): • Base Pay: Competitive hourly (based on experience)., • Commission: Earn % on work you sell and complete., • Bonuses: Performance-based bonuses for production, reviews, and upsells., • Earning Potential: $$$$, • Technicians who can communicate well and take ownership of jobs consistently outperform typical hourly-only roles. What Makes This Different: • You’re not just a tech — you’re a producer., • Opportunity to earn on what you generate, not just time worked., • Consistent call flow + ability to maximize ticket value., • Support team helps with scheduling and customer management., • Growth path into senior tech / field supervisor roles. Requirements: • 5+ years plumbing service experience., • Strong diagnostic skills., • Ability to communicate clearly with customers., • Clean, professional appearance., • Valid driver’s license. Preferred (But Not Required): • Experience in drain cleaning, sewer work, or water heaters., • Sales experience or comfort presenting options., • Ability to upsell ethically and confidently. What We’re Looking ForSomeone who: • Wants to make real money, not just collect a paycheck., • Takes pride in their work and customer experience., • Can own a job from start to finish., • Is hungry to grow with a company. Perks: • Company vehicle., • Steady, year-round work., • Performance incentives., • Growth opportunities. Apply Now:

Job DescriptionJob Title: Plumbing Service Technician (High Earning Potential – Base + Commission + Bonuses) Company: Quix Plumbing Service Location: [Brooklyn / Queens / Bronx / NYC Area] About Quix Plumbing Service: Quix Plumbing Service is a fast-growing, service-focused plumbing company built around speed, quality, and customer experience. We’re not a “run 10 calls and go home” shop — we focus on high-value service, strong communication, and giving technicians the ability to earn well above industry average. If you’re a solid technician who knows how to diagnose, communicate, and close work, this is a high-income opportunity. What You’ll Do: • Run residential and light commercial service calls., • Diagnose plumbing issues and present solutions to customers., • Perform repairs, replacements, and installations., • Educate customers on options (not just quick fixes)., • Deliver a high-level customer experience that leads to repeat business and reviews. Compensation (Where This Role Stands Out): • Base Pay: Competitive hourly (based on experience)., • Commission: Earn % on work you sell and complete., • Bonuses: Performance-based bonuses for production, reviews, and upsells., • Earning Potential: $80,000 – $150,000+., • Technicians who can communicate well and take ownership of jobs consistently outperform typical hourly-only roles. What Makes This Different: • You’re not just a tech — you’re a producer., • Opportunity to earn on what you generate, not just time worked., • Consistent call flow + ability to maximize ticket value., • Support team helps with scheduling and customer management., • Growth path into senior tech / field supervisor roles. Requirements: • 3+ years plumbing service experience., • Strong diagnostic skills., • Ability to communicate clearly with customers., • Clean, professional appearance., • Valid driver’s license. Preferred (But Not Required): • Experience in drain cleaning, sewer work, or water heaters., • Sales experience or comfort presenting options., • Ability to upsell ethically and confidently. What We’re Looking ForSomeone who: • Wants to make real money, not just collect a paycheck., • Takes pride in their work and customer experience., • Can own a job from start to finish., • Is hungry to grow with a company. Perks: • Company vehicle., • Steady, year-round work., • Performance incentives., • Growth opportunities. Apply Now:If you’re tired of being capped hourly and want to get paid based on what you produce — apply today.

Job Description OVERVIEW Citarella is one of the most iconic premium food retailers in the United States, built on more than a century of culinary heritage and an uncompromising commitment to quality. Established in New York City in 1912 as a neighborhood seafood shop, the company has evolved into a family-run gourmet market destination known for “fresh from the source” standards, deep product expertise, and a hospitality-forward customer experience. Today, Citarella operates specialty markets across New York City, the Hamptons, and Greenwich, Connecticut. The brand is widely recognized for extraordinary seafood and a best-in-class assortment of prime dry-aged meats, chef-prepared foods, scratch-made pastries, artisanal cheeses, cured meats, smoked fish, and a curated lineup of private-label products. Its reputation rests on craftsmanship, pride, operational discipline, and a relentless pursuit of excellence. Citarella’s next chapter requires scaling this high-standard, founder-driven business into a durable, professionally managed enterprise capable of sustained growth across markets and channels—while preserving the quality, culture, and customer intimacy that define the brand. Role Overview: As the To Go Department Manager, you will be overseeing our in-store kitchen operations. Our To Go Managers are responsible for the daily operations of the department in addition but not limited to inventory control, quality control, product presentation, managing and, supporting the team. Our guest is the heart of our business. All To Go Department Managers must have kitchen supervisory experience, food knowledge, positive energy, be dependable, possess basic math skills and excellent communication skills. Responsibilities & Duties: • Enforce the highest standards of quality and service. Ensure food is replenished in a timely manner., • Manage schedules, team members PTO time, maintain timecards and manage labor., • Assist with multiple-shift operations for (hot bar, salad bar, soup bar, and coffee station)., • Prepare a variety of food products (breakfast/lunch, prepared foods, and salad bar items)., • Oversee kitchen staff, assign tasks, and set tone and pace of the kitchen., • Monitor department profitability, appearance, and supervise team members., • Review and analyze department sales, waste, and labor reports., • Supervise team members, ensuring service standards are always being met., • Process and submit orders; keeping track of department inventory., • Monitor quality, freshness and safeguard proper product rotation., • Adhere to all DOH, DOA and OSHA standards., • Ensure department is cleaned and maintained throughout all shifts., • Maintain accurate department signage and pricing., • Keep records of temperatures, production, spoilage, and department transfers by way of department log., • Direct and support team members on department opening and closing procedures., • Assist Department Manager with hiring, training and the development of all team members., • Cultivate, develop and retain team members by way of motivation, and providing feedback., • Adhere to all assigned duties by management team. Minimum Requirements: • Minimum of 3 years’ kitchen supervisor experience., • Flexibility schedule including nights, weekends and holidays., • Ability to perform physical requirements of job including standing during scheduled hours, kneeling, stooping, using stairs, lifting, push and pull items of usually 50-60 pounds., • Food safety and sanitation knowledge., • Ability to show initiative, work with limited supervision, and are self-motivated., • Ability to hire, train, inspire and develop a team., • Team builder and brand ambassador., • Excellent interpersonal communication and organizational skills., • Analytical thinking and proficiency in math needed to perform job responsibilities., • Proficient computer knowledge and skills; Microsoft Outlook, Word, Excel IN RETURN, WE OFFER!

Job Description Summary The General Manager will lead the coordination and planning of everyday business operations. The General Manager is a team builder and helps provide support and direction to ensure the operations of the business run smoothly. Job Expectations The General Manager is always responsible and accountable for all restaurant activities. The General Manager ensures all Restaurant Management and Team Members are performing their job responsibilities and meeting expectations in all areas of their job descriptions. The General Manager is expected to create, execute and follow-up on the Restaurant's Business Plan. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Ensure that required Ops Walks and Q&A checks to correct areas of opportunity are being completed effectively and consistently, • Ensure that shift schedules are organized for Team Members and monitor/coach attendance, tardiness and time off, • Understand how each job responsibility impacts guests, employees, and overall restaurant operations, • Ensure the Restaurant Management Team and Team Members work together to prepare items on the Dave’s Hot Chicken menu while following cooking instructions, safety procedures, and sanitary requirements, • Ensure restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction/supervision/feedback for their management team & Team Members to maintain levels of high productivity and team morale, • Institute and follow advanced cash handling policies and procedures, • Hire, train, schedule and oversee the daily tasks of their teams, • Manage purchasing, inventory, maintenance and other operational functions, • Develop strategies for better workplace efficiency and goal achievement, • Focus on building sales and forecasting future performance, • Effectively plan, organize, and implement all daily operational routines and activities with the management team, • Ensure all required administrative duties and daily paperwork including required checklists are completed, • Ensure Restaurant is opened and closed according to DHC policy, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with the Restaurant Management Team & Team Members and to resolve any interpersonal issues as neededRequirements, • Current student or high school diploma/GED preferred, • Must be at least 21 years old and fluent in English, • Previous Assistant General Manager/General Manager experience, • Certified in all stations and Management positions following the DHC Training Program, • Current ServSafe Certification, • Flexibility to work nights, weekends, holidays, opening, and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to bend and stoop and lift 50 - 75 lbs. comfortably, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from the Guest's point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skillsTransportation & Accessibility:, • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and TeammatesAbout Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read "East Hollywood's Late Night Chicken Stand Might Blow Your Mind." Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada. We use eVerify to confirm U.S. Employment eligibility.

Job Description A. Duie Pyle is looking for an experienced, Fleet Maintenance Shop Supervisor to join our Fleet Maintenance Department at our Bronx, NY shop. As the Fleet Maintenance Supervisor, you’ll have the opportunity to oversee the maintenance and repair of Pyle equipment, coordinate and build work schedules, and monitor the distribution of work flow between employees. Why Pyle? • Up to $110,000 annually, depending on experience, • Start time: 7:00 AM, Monday-Friday, • Annual Benefits; Top competitive pay rates, • New, modern equipment to work on in clean shops, • Premier Northeast Carrier – 24 Shops across the Northeast Region Simply put, when it comes to getting the job done, Pyle People Deliver. A family-owned and operated business since 1924, Pyle believes in providing you with the resources and stability to succeed. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Your main responsibilities will include, but are not limited to: • Monitoring and coordinating daily work schedules; monitoring Technician’s daily productivity and prioritized distribution of work flow between 1st, 2nd, and 3rd shifts, • Overseeing maintenance of all company-owned equipment in the fleet including but not limited to Tractor Trailers, Heavy Duty Trucks and Forklifts, • Performing quality repair audits ensuring standardization and excellence, • Counseling employees about work related issues and provide guidance, • Maintaining a safe and clean working environment for all employees ensuring OSHA standards are met, • Ensuring timely preventive/predictive maintenance is performed, • Effectively managing road calls to minimize driver downtime, • Communicating with Operations Leadership to ensure all equipment requirements are fulfilled, • Overseeing parts / stock room inventory and parts ordering on a daily basis, • Ensuring proper filing and archiving of shop-related documentation Your Benefits will include: • Medical, Dental, Vision, and Life Insurance, • 8 paid annual holidays – in addition to vacation and personal time off, • 401(k) with company match, • Paid Weekly via Direct Deposit, • Paid Vacation and Personal Time, • Annual Tool Allowance Program, • Annual, continual training, • Uniforms Provided To be successful in this role you will need to have the following: • Possess 3 - 5 years of experience in Class 8 truck repairs including electronic diesel engine repair and air brake systems, • High School Diploma or equivalent, • Excellent working knowledge of all heavy-duty truck and material handling equipment systems with proven diagnostic / troubleshooting skills set, • Valid driver's license (CDL) preferred, • Proven interpersonal skills with the ability to interact effectively with shop technicians and Operations Management, • Excellent record-keeping and organizational skills, • Ability to work all shifts as necessary Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job DescriptionAbout Sets & Effects Sets and Effects is a custom fabrication shop specializing in scenic environments, props, displays, and installations for the entertainment, fashion, retail, and experiential event industries. Our work spans a wide range of projects, from intricate custom props and retail displays to large-scale scenic builds and immersive environments. We combine traditional craftsmanship with modern fabrication techniques to bring ambitious and often unconventional designs to life. We pride ourselves on the quality of our work, our creative problem-solving, and our ability to tackle complex projects under demanding deadlines. Our shop is a collaborative, fast-paced environment where no two projects are quite the same. We are preparing to move into a new, larger fabrication facility, marking an exciting next chapter for our company. We're looking for a Shop Foreman who can play a key role in this transition, helping plan and implement an efficient shop floor layout, organize equipment and work areas, and establish workflows that maximize productivity and support our continued growth. This is an opportunity for an experienced fabrication professional to help shape the future of our shop while leading a talented team and maintaining the high standards of craftsmanship our clients expect. Job Overview Sets and Effects is seeking an experienced Shop Foreman who shares our commitment to craftsmanship to oversee day-to-day production in our busy scenic and event fabrication shop. The ideal candidate is a highly skilled fabricator with strong leadership abilities, excellent organizational skills, and extensive experience in custom fabrication. This is a hands-on leadership position requiring someone who can manage shop personnel, coordinate multiple projects, troubleshoot fabrication challenges, and ensure that work is completed efficiently, safely, and to our high standards of quality. Our shop produces custom scenic elements, props, displays, and installations for events, fashion, retail, and experiential productions. Projects are varied, often complex, and typically operate on tight deadlines. Key Responsibilities Oversee daily shop operations, workflow, and production schedules. Supervise and coordinate with carpenters, fabricators, scenic artists, and other shop personnel. Work closely with project managers to plan fabrication approaches, establish priorities, and allocate labor and resources. Review technical drawings and designs to determine efficient construction methods. Provide hands-on fabrication expertise, guidance, and problem-solving throughout the production process. Monitor progress across multiple simultaneous projects, identifying potential delays or issues before they become problems. Maintain high standards of craftsmanship, quality control, and attention to detail. Ensure safe use of tools, machinery, and equipment and maintain an organized, efficient workspace. Assist with material planning, inventory management, and shop logistics. Help establish and improve shop processes to maximize productivity and minimize waste. Play an active role in planning and executing our move to a larger facility, including shop floor layout, equipment placement, workflow optimization, and the organization of production areas to create a safe, efficient, and highly functional fabrication shop. Qualifications Extensive professional experience in scenic fabrication, custom carpentry, set construction, or a related field. Strong knowledge of woodworking, construction methods, fabrication materials, and shop machinery. Proven experience supervising and coordinating fabrication crews. Ability to read and interpret technical drawings and construction plans. Excellent organizational, communication, and time-management skills. Ability to prioritize tasks and manage multiple projects under tight deadlines. Strong problem-solving skills and the ability to develop practical fabrication solutions. Comfortable working in a fast-paced, constantly changing production environment. Experience with CNC fabrication, metalworking, finishing, and other specialty fabrication techniques is a plus. Ideal Candidate We're looking for someone who takes ownership of the shop floor, leads by example, and knows how to get things built. Someone who can balance hands-on craftsmanship with the bigger picture of keeping an entire shop running smoothly. The right person will be proactive, resourceful, decisive, and capable of earning the respect of an experienced fabrication team. Compensation & Schedule Hourly Rate: 42–48, commensurate with experience and qualifications. Schedule: Generally 40–45 hours per week. Overtime: Occasional overtime and weekend availability required based on production schedules. Overtime paid in accordance with applicable law. To Apply Please send your resume and a brief description of your relevant fabrication and supervisory experience to cwj@setsandeffects.com.

Job Description Summary: The Assistant Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The Assistant Manager directs employees and ensures that work is being completed in a timely and effective manner. **REQUIRED NYC FOOD HANDLERS LICENSE. Job Expectations: The Assistant Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Shift Leaders, Team Members and Management to resolve any interpersonal issues as needed Requirements: • Current student or high school diploma/GED preferred, • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to bend and stoop and lift 50 - 75 lbs. comfortably, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work., • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read "East Hollywood's Late Night Chicken Stand Might Blow Your Mind." Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada. We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionCompany Description Redzone, the Connected Workforce business unit within QAD | Redzone, helps manufacturers make more products for less while greatly improving the employee experience. While there is a lot of hype around digital transformation, the factory of the future, and Industry 4.0, the focus has been on the equipment and technology – not the people. At Redzone, we are all about the people, what we call “the connected workforce.” We make frontline teams more engaged and more productive so their lives improve while contributing to positive business outcomes. We do this by combining exceptional software and world-class coaching, giving our customers an average productivity increase of 26% in 90 days. Redzone brings together Production, Maintenance, and Quality teams, improving the communications between those teams to resolve issues and increase output. Decision-making happens on the shop floor by the people doing the work, in real time, for immediate impact and a better overall employee experience. With an AI powered platform, nearly 2000 plants and over 500,000 users, Redzone is changing the way people work – one plant at a time. Job Description The Operational Excellence (OpEx) Coach is responsible for leading major Lean and cultural transformations across their customers in the Food & Beverage, CPG and General Manufacturing industries through the implementation of QAD Redzone software and expert level coaching. Coaches work within highly autonomous teams led by a Coach Director, have practical experience of delivering CI in plants and believe in leading-through-doing. They work directly with customers’ shop floor staff, frontline leaders, CI directors and C-level executives to achieve both significant personal growth and tremendous productivity gains. Before applying, please read below: This position is Full Time, Exempt, Remote and required to travel 42 weeks, Monday through Thursday (annually) throughout the United States. Coaches must be able and willing to transport themselves by means of both driving and flying to customer locations up to 80% as needed. This role is not available for sponsorship. Must be authorized to work in the United States. Bilingual in English and French is required. Responsibilities • Oversees and coaches 5-7 customers at a time, • Trains customers on workflows inside Redzone software through multiple 90-day on-site deployments, • Facilitates shop-floor Huddles and leadership team Daily Vital Signs meetings to support action cycles on the shop floor, • Tracks performance data and customer uplifts throughout the deployment, • Leads process improvement and kaizen activities for customers, • Openly shares feedback with frontline teams and leadership to drive positive behavior change and uplift results, • Facilitates remote weekly customer progress meetings, • Identifies miracle stories as well as miracle results to guide celebrations of wins with the customer, • Manages project schedules with customers, • Provides Success Assessments upon project completion, • Delivers executive overviews and provides customers with information related to all Redzone programs, • Troubleshoots customer technical issues as needed, • Supports customer identification of next steps in their Redzone journey, • Other duties as assignedQualifications, • Fluent in both English and French required., • Senior Operations Leadership experience in manufacturing environments required, • Previous experience working in direct, hands-on manufacturing roles like Operations Manager, Production Supervisor, and/or Continuous Improvement Manager, • Practice using Overall Equipment Effectiveness (OEE) and its components in driving production results and continuous improvement, • Ability to plan, organize, and function effectively in a dynamic environment, addressing multiple demands of internal teams and clients, • Ability to develop/maintain strong relationships with clients and internal teams, • Excellent interpersonal and organizational skills, • Strong written and verbal communication skills, • Sound judgment and excellent assessment skills, • Ability to manage time effectively and to work in a high paced, high growth environment, • Ability to prioritize tasks within active projects to meet critical path deadlines, • Advanced knowledge of MS Office (PowerPoint, Word, Excel, Outlook), • Tech friendly and comfortable communicating technical requirements about networking, wireless, and software information, • Able to learn software required to perform successfully in this position, • Programmable Logic Controller (PLC) experience and familiarity is desired, but not required, • Must be able to provide proof of valid state drivers license Education/Experience • BA or BS – Relevant fields of study can include but are not limited to: Engineering, Manufacturing, Organizational Leadership/Management, Supply Chain Management, Business Management, • 2 years in a similar position, providing direct coaching to business clients, is desired but not required Additional Information • Your health and well being are important to us at QAD. We provide programs that help you strike a healthy work-life balance., • Opportunity to join a growing business, launching into its next phase of expansion and transformation., • Collaborative culture of smart and hard-working people who support one another to get the job done., • An atmosphere of growth and opportunity, where idea-sharing is always prioritized over level or Hierarchy., • Compensation packages based on experience and desired skill set Compensation Package: • Base pay range: $125,000 - $150,000 USD Annual (12 Months)., • Placement within our pay range will vary based on knowledge, skills, experience, and market location variations as well as internal peer equity., • This position may be eligible for additional performance incentives, • U.S. benefits package includes medical, dental and ,vision coverage, a 401(k) plan with company match, short-term and long-term disability coverage, life insurance, paid time off, parental leave, flexible spending accounts and employee assistance program. About QAD and QAD Redzone: QAD Inc. is a leading provider of adaptive, cloud-based enterprise software and services for global manufacturing companies. Global manufacturers face ever-increasing disruption caused by technology-driven innovation and changing consumer preferences. In order to survive and thrive, manufacturers must be able to innovate and change business models at unprecedented rates of speed. QAD calls these companies Adaptive Manufacturing Enterprises. QAD Redzone helps to enable QAD’s vision for the Adaptive Enterprise. Labor productivity improvements directly impact efficiency. Productive and empowered employees increase the effective capacity of your plant and accelerate time to productivity for new employees giving manufacturers the agility to increase production beyond what was previously possible without having to invest in production equipment or new plants, and reduce the amount and impact of employee attrition. Empowered employees with a growth mindset take extreme ownership of challenges that impact their production goals, creating resilience in the face of disruption. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. #LI-Remote

Job Description Summary The General Manager will lead the coordination and planning of everyday business operations. The General Manager is a team builder and helps provide support and direction to ensure the operations of the business run smoothly. Job Expectations The General Manager is always responsible and accountable for all restaurant activities. The General Manager ensures all Restaurant Management and Team Members are performing their job responsibilities and meeting expectations in all areas of their job descriptions. The General Manager is expected to create, execute and follow-up on the Restaurant's Business Plan. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Ensure that required Ops Walks and Q&A checks to correct areas of opportunity are being completed effectively and consistently, • Ensure that shift schedules are organized for Team Members and monitor/coach attendance, tardiness and time off, • Understand how each job responsibility impacts guests, employees, and overall restaurant operations, • Ensure the Restaurant Management Team and Team Members work together to prepare items on the Dave’s Hot Chicken menu while following cooking instructions, safety procedures, and sanitary requirements, • Ensure restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction/supervision/feedback for their management team & Team Members to maintain levels of high productivity and team morale, • Institute and follow advanced cash handling policies and procedures, • Hire, train, schedule and oversee the daily tasks of their teams, • Manage purchasing, inventory, maintenance and other operational functions, • Develop strategies for better workplace efficiency and goal achievement, • Focus on building sales and forecasting future performance, • Effectively plan, organize, and implement all daily operational routines and activities with the management team, • Ensure all required administrative duties and daily paperwork including required checklists are completed, • Ensure Restaurant is opened and closed according to DHC policy, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with the Restaurant Management Team & Team Members and to resolve any interpersonal issues as neededRequirements, • Current student or high school diploma/GED preferred, • Must be at least 21 years old and fluent in English, • Previous Assistant General Manager/General Manager experience, • Certified in all stations and Management positions following the DHC Training Program, • Current ServSafe Certification, • Flexibility to work nights, weekends, holidays, opening, and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to bend and stoop and lift 50 - 75 lbs. comfortably, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from the Guest's point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skillsTransportation & Accessibility:, • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and TeammatesAbout Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read "East Hollywood's Late Night Chicken Stand Might Blow Your Mind." Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada. We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$26.00/hr per union contractMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description Are you a driven and skilled Automotive Technician ready to rev up your career? Look no further! We're seeking passionate individuals to join our team at two prestigious locations: Mercedes-Benz of Brooklyn and Land Rover Brooklyn. At Kollective Automotive Group, we offer more than just a job; we offer a dynamic and rewarding career path. Why Kollective Automotive Group? Outstanding Earning Potential: We pay better than everyone else, with over 50% of our technicians earning above $100,000 annually. Line technicians start at an impressive $20 per hour and can earn more than $85 per hour. State of the Art Facility and Tools: Our state-of-the-art facility features an organized tool room, high-quality lifts that are regularly inspected and maintained, and an arsenal of cutting-edge tools, including Xentry, TopIX Cloud Pathfinders, and scan tools to empower you in delivering exceptional service. Top-Notch Parts Department and Knowledgeable Parts Countermen: Our parts department is one of the largest in the country, providing you with a robust inventory that streamlines your work and allows you to get jobs done quickly. Our parts countermen are responsive, possess great attitudes, and are loaded with knowledge. They're your reliable partners in getting the right parts, right when you need them. Talented Service Advisors: Our service advisors are skilled in providing exceptional customer support, consistently ensuring that customer pay exceeds the area average. Investment in Your Growth: We invest in our team members. Enjoy multiple training opportunities throughout the year, keeping you at the forefront of industry advancements. Efficient Workflow: We operate with central dispatch, whose compensation is tied to the hours produced. This ensures seamless operations and efficient workflow. Job Requirements: As an Automotive Technician at Kollective Automotive Group, your role is pivotal in delivering top-notch service. Here's what we expect: • Timely Repairs and Maintenance: Efficiently repair and maintain customer vehicles, ensuring a seamless experience for our valued customers., • Multi-Point Inspection: Consistently utilize our Multi-Point inspection tool at a rate greater than 98%, maintaining safety and reliability., • High-Quality Workmanship: Provide high-quality work at a productive rate, following published procedures and safety guidelines, ensuring Parts Compliance., • Stay Informed: Keep up-to-date with the latest technical bulletins and service publications to stay ahead in your field., • Continuous Training: Attend and actively participate in training programs recommended by our Shop Supervisor and management to enhance your skills., • Warranty Compliance: Adhere to warranty policies when assisting other Dealership Team members in completing warranty information, maintaining the highest standards of compliance., • Exceptional Customer Experience: Treat every customer as a guest in your home, delivering exceptional service that creates a lasting impression and an exceptional customer experience. Who We are Looking for? First and foremost, you must be a team player focused on always caring for our customers. We are not a place where you come to relax, we are a group that requires hard work and rewards it accordingly.. At Mercedes-Benz of Brooklyn we are looking for various skill levels. If you are a lube technician looking to grow and no longer be just a lube technician we are the place for you. If you are a seasoned mechanic with another brand we have a track record of helping many people transition and learn the world class Mercedes-Benz product. If you are a Master Certified Automotive Technician at another Mercedes-Benz dealership and want to finally be rewarded for your hard work then we are definitely the dealership for you. At Jaguar Land Rover Brooklyn we are currently fully staffed but would still be more than happy to meet with you. We have grown month over month but as always, our priority is to protect the income of the technicians. To many technicians means underpaid technicians and that simply isn’t acceptable to us. If you have experience as a Jaguar Land Rover mechanic or are a Level 4 master technician with the brand we would be more than happy to meet you and discuss the potential opportunities with us in the future. There will come a time where we out grow our current team and you can cut to the front of the line by meeting with us today. If you're ready to accelerate your career with a team that values your expertise and dedication, apply today and drive your future forward with Kollective Automotive Group. Discover the road to success! #AutomotiveTechnician #KollectiveAutomotiveGroup #JoinOurTeam * If you are a recent graduate or looking for an apprenticeship or an express technician we are hiring for those roles as well. Depending on the role those jobs pay between $19-$26 hourly. The goal is to progress to a flat rate technician 6-24 months which is advertised above. *

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I. In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$25.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . Job Description : Summary The Operations Management Trainee will support the shop management process and assist in cost savings, customer retention, and metric-based initiatives. This requires the Manager Trainee to work cross functionally across Operations, Asset Management, Sales, Quality, and Rental Management. This program is fast-paced and touches every aspect of the business unit. In this role, you will acquire proven industry knowledge, skills and resources to develop your operations & fleet maintenance background. We allow you to carve out your own career path and promote from within , based on performance. The ideal path of progression in this role is an Ops Supervisor. Now hiring individuals that are interested in working in the transportation industry. This job is an opportunity to learn how to manage a heavy-duty truck repair shop while being paid to train! This job requires a completed 4-year college degree! Location: Newark, NJ Schedule: Monday - Friday Hours: 2:00pm to 10:30pm Salary: Paid weekly Work schedules are subject to change as the trainee progresses in the program. Salary is determined based on internal equity; internal salary ranges; market data/ranges; applicant’s skills; prior relevant experience; certain degrees or certifications, etc. Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. If you're motivated, coachable, and looking for a fast paced, inclusive environment, you've come to the right place. Competitive pay & fast growth, full benefits package, 401k employer match, PTO, and a discount on shares! At Ryder, we are always looking for outstanding individuals to join our team and have a dedicated careers site of all our currently open positions available at https://ryder.com/careers. We take the security of everyone’s personal information very seriously and are dedicated to securing and protecting any information provided to us. This is why, we only accept employment applications through our official careers site. You may receive phone calls, text messages, or emails that appear to be from Ryder or other trusted organizations, but it is important that you remain vigilant when responding to these as they may be scams in which fraudsters try to obtain your personal information for malicious purposes (known as “Phishing”) . While we may call you to verify information you have provided in your application, we will never ask for sensitive personal information from you via email, end user messaging applications such as WhatsApp messenger, Signal messenger, or via text message. If you are asked to provide personal information, click on a link, or navigate to a website other than the official Ryder website ( www.ryder.com ), or download any mobile applications to communicate with our careers team, DO NOT GO ANY FURTHER. End the call or exit the website as this is very likely a scam Essential Functions • Responsible for the customer relationship activities by providing quality customer interface, proactive customer management, issue resolution, and customer satisfaction., • Coordinate with the rental department to ensure maximum utilization without compromising lease customers., • Partner with Sales staff on customer calls for new business and increased customer satisfaction., • Manage running costs and maintenance overheads. Ensure policy and processes are followed to optimize running costs and maintenance overhead., • Accountable for coordinating with Maintenance, Asset Management, Sales and Marketing to ensure customer satisfaction., • Ensure accurate PM scheduling and follow up, breakdowns and vehicle status updates; oversee Technician work planning for efficiency, training, and flexibility. Additional Responsibilities • Relocation within the business unit at the conclusion of the training program is required., • Performs other duties as assigned. Skills and Abilities • Detail oriented with excellent follow-up practices, Required., • Strong verbal and written communication skills , Required., • Instills commitment to organizational goals , Required., • Capable of multi-tasking, highly organized, with excellent time management skills Able to prioritize work, Required., • Flexibility to operate and self-driven to excel in a fast-paced environment , Required., • Strong mechanical skills , Required., • Effective interpersonal skills Excellent influencing skills, Required., • Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors). , Required., • Ability to work independently and as a member of a team, Required. Qualifications • Bachelor's Degree, Required., • 1 year or more in customer service with issues resolution experience, Preferred., • Strong PC knowledge/skills to include spreadsheet and word processing software packages Advanced, Required., • Basic understanding of Business Finance, controls and metrics Beginner, Required. #LI-RL #INDexempt #FB Job Category: Operations and Support Our Culture & Commitment : At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried Minimum Pay Range: $58K Maximum Pay Range: $60K Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through www.ryder.com/careers . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at careers@ryder.com or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here (https://wd5.myworkday.com/ryder/d/task/2998$46522.htmld) to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . #wd

Department: Machine Shop Reports To: Department Manager Physical Demand Level: Medium to Heavy FLSA Status (US only): Non-Exempt SUMMARY: The Machine Operator I is responsible for performing the essential manufacturing steps of part trimming and drilling, meeting daily production needs in manufacturing quality parts. SUPERVISORY RESPONSIBILITIES: This role does not have supervisory responsibilities. ESSENTIAL DUTIES & KEY RESPONSIBILITIES: • Maintains safe operations by adhering to safety procedures and regulations., • Trim plated parts to print specifications utilizing manual and programmable Lathes., • Core drill parts using equipment including manual drill presses, lathes and programmable HAAS Drilling machines, • Program HAAS machines for drilling operations., • Performs preventative maintenance including fluid changes, lubrication and cleaning of machines when needed/directed by the Lead / Supervisor, • Accurately record production information on paper travellers and in the ERP system, • Maintains a clean machine and organized work area., • Makes minor repairs and notifies maintenance for other maintenance needs., • Performs variety of tasks such as counting, cleaning, returning gauges and fixtures, transferring of parts, • Use measuring equipment to maintain close tolerances, • Follows schedules and procedures, • Adaptable to cell and team concepts as well as cross-training, • Sees that all safety guards are in place and in good condition, • Assists other operators if necessary, • Inspects work in progress using equipment necessary and outlined in Quality or work instructions. Responsible for quality of own work; required to notify Supervisor or Lead if quality requirement is unclear or questionable, • All other duties as assigned SKILLS & COMPETENCIES: • Must be proficient in reading and interpreting blueprints, specification sheets, and/or mechanical drawings and in precision measurement or become proficient through training., • Computer literacy, • Capable of using measuring instruments, i.e. micrometer, calipers, comparator, height gauge, etc., • Capable of using hand tools (i.e. screwdriver, wrenches etc.), • Ability to read and write, perform basic arithmetic and follow verbal and written instructions. EDUCATION & EXPERIENCE Desired • High School Diploma or Equivalent BENEFITS: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • PTO, • Paid Holidays, • Paid Sick Days, • 401K / 401K Company Match, • Life Insurance, • Paid Jury Duty, • Employee Referral Program, • Tuition Reimbursement Program based on, • Employee Assistance Program SALARY RANGE: $18.00 - $21.00/Hour based on experience and ability to perform work independently. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and hear. The employee is frequently required to walk; reach with hands/arms; lift and/or lower; push and/or pull; and use hands to finger, handle, feel and/or finely manipulate objects. The employee must frequently lift/move and/or push/pull up to 20 lbs. and occasionally lift/move and/or push/pull up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Use of vision correction is acceptable, if necessary; however, any vision correction apparatus must meet all safety guidelines for the area of activity. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionBenefits: • Health insurance, • Paid time off, • Vision insurance, • Competitive salary, • Dental insurance, • Employee discounts Role Summary This role supports day-to-day warehouse operations — receiving and inspecting shipments, pulling and packing orders, and maintaining accurate inventory across both bulk/pallet and case-pick/parcel work. You'll work directly in SAP B1, handle walk-in customer transactions and returns, and move between tasks and locations as the operation requires. What You'll Do ● Receive, inspect, and process incoming shipments — flagging damage, defects, or discrepancies — into inventory ● Pull, pack, and verify outbound orders in both bulk/pallet and piece-pick/parcel environments, ensuring accuracy ● Put away stock and maintain accurate bin mapping so inventory can be located reliably ● Handle walk-in customer checkout and process shipped and walk-in returns — inspect returns and flag them for restock, vendor return/credit, or write-off as a last resort ● Create GRPOs (goods receipt POs) and update barcodes and SKUs (stock keeping units) in SAP B1 ● Coordinate cross-location inventory transfers in SAP B1 and conduct cycle counts / inventory audits ● Operate pallet jacks, hand trucks, and forklifts (if certified); follow safety guidelines while standing for extended periods and lifting up to 60 lbs, including repetitive lifting for an hour or more at a stretch What Separates Strong Performers ● Tracks specifics — exact counts, SKUs, steps — rather than working from a general sense of what needs to happen ● Holds the same standard of accuracy on a bulk pallet run as on a single piece-pick order — no environment gets the shortcut ● Takes correction well, whether it comes from a supervisor or a coworker, and doesn't need to hear the same feedback twice ● Handles unglamorous, repetitive tasks without complaint and earns the team's trust over time ● Owns mistakes directly and raises process concerns rather than working around them ● Moves fluidly across tasks and locations — the versatility that leads into floor supervision or coverage-relief responsibilities as you grow in the role What You Need to Succeed Read through honestly before you apply — this role is a good fit if: ● You have a high school diploma or GED (preferred) and have worked in a warehouse setting before ● You're comfortable operating pallet jacks and hand trucks; forklift certification is a strong plus, especially for bulk/pallet work ● You're proficient with ERP (enterprise resource planning) or order management systems, preferably SAP B1 ● You can stand for extended periods and lift up to 60 lbs repeatedly, including sustained stretches with no lighter tasks to rotate to ● You have reliable transportation and can commit to being on time for every shift, without exception ● You're comfortable keeping personal phone use off the floor during your shift ● You work well without close supervision and manage your own time effectively What We Offer Competitive hourly pay ($17.00–$22.00, based on experience), medical/dental/vision insurance, paid time off, employee discounts, training & development, career advancement opportunities, and flexible scheduling. About The Cloud Supply We're a wholesale distributor of premium smoke shop, glass, vapor, hookah, and other alternative products. Founded in 2011 and headquartered in Linden, New Jersey, we provide service and authentic, high-quality products to retailers and wholesalers.

Job Description Job Title: Retail Store Team Leader Location: New York, NY Type: Contract (approx. 5 months- possible extension) Compensation: $25.00 Contractor Work Model: Onsite Hours: Flexible availability to work within store operating hours, including evenings, weekends, and some holidays Overview Join the excitement of a limited-time anime and manga pop-up shop. We're looking for an energetic Retail Store Team Leader who enjoys engaging with customers, supporting store operations, and helping lead a team in a fun, high-energy retail environment. Whether you're a fan of anime and manga or simply love unique retail experiences and pop-up events, this is a great opportunity to be part of something special. Responsibilities • Greet and assist customers with product recommendations and purchases, • Operate POS system and handle cash/card transactions accurately, • Restock merchandise and maintain organized, visually appealing displays, • Keep the store clean, organized, and welcoming, • Assist in leading, coaching, and supervising a team of Sales Associates to ensure excellent customer service and store operations, • Support scheduling, task delegation, and day-to-day team coordination as directed by management, • Follow store policies and supervisor direction, • Report any issues, concerns, or incidents promptly Requirements, • Previous retail, customer service, or sales experience required, • Prior experience as a Team Lead, Shift Lead, Key Holder, Supervisor, or in a similar leadership role preferred, • Demonstrated ability to lead, motivate, and support a team in a fast-paced retail environment, • Friendly, outgoing, and dependable with a positive attitude, • Strong communication, interpersonal, and problem-solving skills, • Ability to multitask and remain on your feet for extended periods, • Team player with respect for a diverse customer base, • Interest in anime, manga, or pop culture is a plus (not required), • Japanese language skills are a plus, • Flexible availability, including evenings, weekends, and holidays System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Job Title: Retail Sales Associate Location: New York, NY Type: Contract (approx. 5 months- possible extension) Compensation: $22.00 Contractor Work Model: Onsite Hours: Flexible availability to work within store operating hours, including evenings, weekends, and some holidays Overview Join the excitement of a limited-time anime pop-up shop. We’re looking for energetic Retail Sales Associates who enjoy engaging with customers and being part of a fun, high-energy retail environment. Whether you’re a fan of anime and manga or simply love unique retail experiences and pop-up events, this is a great opportunity to be part of something special. Responsibilities • Greet and assist customers with product recommendations and purchases, • Operate POS system and handle cash/card transactions accurately, • Restock merchandise and maintain organized, visually appealing displays, • Keep the store clean, organized, and welcoming, • Follow store policies and supervisor direction, • Report any issues, concerns, or incidents promptly Qualifications, • Previous retail or customer service experience preferred, • Friendly, outgoing, and dependable with a positive attitude, • Ability to multitask and remain on your feet for extended periods, • Team player with respect for a diverse customer base, • Interest in anime, manga, or pop culture is a plus (not required), • Japanese language skills are a plus, • Flexible availability, including evenings, weekends, and holidays System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Company Description Bestmark National is a premier design-build firm specializing in commercial, retail, and hospitality environments. The company values passionate leadership and delivers high-quality results tailored to each client's needs. With a state-of-the-art facility and a versatile team, Bestmark National ensures safe, well-executed, and timely project delivery across America. Role Description This is a full-time, on-site role based in Irvington, NJ Bestmark National is seeking an experienced CNC Operator who will be responsible for setting up and operating CNC machinery to produce accurate, high-quality components in accordance with shop drawings, work orders, and production specifications. The ideal candidate will have hands-on experience operating CNC machinery in an architectural millwork, woodworking, cabinetry, or custom fabrication environment. This role requires practical knowledge of woodworking materials and machining processes, attention to detail, and a strong commitment to production quality and workplace safety. Key Responsibilities • Prepare, set up, and operate CNC machines to perform machining operations such as drilling, grinding and milling,, • Load, position, and secure raw materials and components into the machine., • Review job orders, shop drawings, and production specifications to determine required machining operations., • Follow established CNC programs and machine instructions to produce components according to project requirements., • Conduct test runs and verify that produced components meet required measurements, specifications, and quality standards., • Perform periodic physical inspections of components throughout the production process to identify defects or inconsistencies., • Monitor machine operations and make routine adjustments as necessary to maintain accuracy, quality, and production efficiency., • Identify and report machine, tooling, or production issues to the Supervisor or Production Manager., • Perform routine daily, weekly, and monthly machine maintenance and inspections as required., • Operate and maintain a forklift for material handling, deliveries, and pickups, as needed., • Ensure proper material handling throughout all stages of production., • Inspect machines and work areas at the end of each shift to ensure they are properly maintained and left in safe condition., • Immediately report unsafe conditions, equipment concerns, and workplace incidents., • Perform other duties and responsibilities as directed by the Supervisor or Production Manager. Qualifications • Previous hands-on experience operating CNC machinery in architectural millwork, woodworking, cabinetry, or a related manufacturing environment., • Familiarity with HOMAG CNC machinery and equipment. (HOMAG N500 & HOMAG 5-Axis CNC Machines), • Ability to read and interpret shop drawings, job orders, measurements, and production specifications., • Knowledge of woodworking materials, machining processes, and fabrication procedures., • Experience with machine setup, material loading, component inspection, and basic troubleshooting., • Ability to identify quality issues and maintain accuracy throughout the production process., • Strong attention to detail and ability to follow production instructions., • Ability to work independently and collaboratively within a manufacturing team., • Commitment to workplace safety and proper equipment operation., • Ability to work overtime when needed.

Job DescriptionElectra USA is one of the largest electromechanical contractors in the New York market, delivering integrated, high-performance systems across the commercial, transportation, infrastructure, and mission-critical sectors, employing over 1100 employees. Through Electra USA’s operating units, Hellman Electric, Gilston Electric, F.W. Sims Mechanical, and PJ Mechanical, Electra USA brings technical excellence, reliability, and innovation to every project. Job Summary:The Assistant Project Manager supports Project Managers in the total management of projects assigned to the Electrical Division, including planning, budgeting, scheduling, customer interaction, and internal reporting and coordination. The Assistant Project Manager carries substantially the same responsibilities as a Project Manager but, given less tenure and experience in the role, works under the close supervision of a Project Manager on all project requirements. Position offers career path to Project Management. Essential Responsibilities:Project Execution & Coordination: • Support the Project Manager in the successful execution of assigned commercial electrical construction projects from pre-construction through closeout, ensuring work is delivered on schedule, within scope, and within budget., • Assist with developing project scopes, objectives, schedules, and detailed project plans; monitor progress against key milestones and deliverables., • Coordinate with Project Managers, Foremen, Superintendents, Engineering/CAD teams, and other project stakeholders to support efficient day-to-day project execution., • Help identify, track, and resolve project issues, escalating significant concerns to the Project Manager, Project Supervisor, or Superintendent as appropriate., • Provide concise and timely project reporting to support project accountability and decision-making. Project Documentation & Administration: • Manage and maintain accurate project documentation, including submittals, RFIs, change orders, transmittals, correspondence, and other project records using applicable project management systems and software., • Support the development and review of shop drawings and coordinate with Engineering/CAD teams to facilitate timely approvals., • Apply appropriate processes and controls to help manage changes to project scope, schedule, and cost. Scheduling, Materials & Procurement: • Assist with maintaining project schedules, tracking milestones, and coordinating daily activities with electrical Foremen and other field personnel., • Track procurement and material deliveries to ensure materials are ordered, received, and available at the jobsite when needed for construction., • Verify that materials and equipment meet contract specifications, quality requirements, and project needs., • Assist with managing vendors, subcontractors, and manufacturers to support timely and efficient project execution. Cost Management & Billing: • Assist with monitoring project costs, reviewing job cost reports, and identifying variances or potential cost concerns., • Support the preparation of quarterly job projections, forecasts, and other project financial reports using appropriate cost analysis techniques., • Assist with timely monthly billing, including tracking percent complete and supporting negotiations with clients regarding progress billing., • Support the preparation, pricing, negotiation, and processing of change orders with clients and other project stakeholders. Client & Subcontractor Relationships: • Support the Project Manager in maintaining strong, professional relationships with clients and project stakeholders., • Communicate professionally and collaboratively with subcontractors, vendors, manufacturers, engineers, architects, and clients., • Assist in addressing and resolving project-related issues while maintaining positive working relationships and a focus on project objectives. Risk, Safety & Compliance: • Assist with identifying and managing project risks and implementing appropriate actions to minimize potential impacts to cost, schedule, quality, and project delivery., • Support the development of Job Hazard Analyses (JHAs) and other required safety documentation., • Assist with the management and oversight of M/W/DBE requirements and other applicable project compliance obligations. Field & Construction Support: • Work closely with the Foreman to discuss and help resolve daily project and construction issues, escalating matters when appropriate., • Support coordination between field operations and project management to ensure construction activities remain aligned with project plans, schedules, and client requirements., • Assist with coordinating resources and supporting effective allocation of labor, materials, equipment, and other project resources., • Help ensure timely communication of field conditions, changes, constraints, and other issues that may affect project performance. Required Qualifications: • Education & Experience: Bachelor’s degree in Construction Management, Electrical Engineering, Engineering, or a related field, or an equivalent combination of education and relevant industry experience., • Relevant Experience: 2–5 years of experience in electrical construction, commercial construction, project engineering, or a related field., • Technical Knowledge: Ability to read and interpret electrical drawings, blueprints, specifications, and schematics., • Project Coordination: Working knowledge of project scheduling, cost tracking, procurement, change management, submittals, RFIs, billing, and project documentation., • Computer Skills: Proficiency with Microsoft Office, including Excel, Word, and Outlook., • Communication: Strong verbal and written communication skills, with the ability to communicate professionally with clients, field personnel, subcontractors, vendors, engineers, architects, and other stakeholders., • Organization: Strong organizational and time-management skills, with the ability to prioritize multiple tasks, meet deadlines, and manage changing priorities in a fast-paced construction environment., • Problem Solving: Ability to identify project issues, gather relevant information, develop practical solutions, and escalate matters appropriately., • Professionalism & Integrity: Demonstrated honesty, integrity, accountability, sound judgment, and a commitment to quality and project success., • Relationship Management: Ability to work collaboratively and maintain professional relationships with clients, colleagues, subcontractors, vendors, and other project stakeholders., • Field Requirements: Ability to visit active construction sites, attend project and progress meetings, and travel locally as required., • Work Environment: Ability to work effectively in both an office and active construction-site environment. Preferred Qualifications: • Experience with commercial electrical construction and familiarity with electrical contracting practices, means and methods, and project delivery processes., • Experience with construction management and project documentation platforms such as Procore, Bluebeam, or similar software., • Experience with project cost control, forecasting, job projections, change orders, and progress billing., • Familiarity with construction scheduling software and project management tools., • Experience coordinating vendors, subcontractors, material procurement, and jobsite logistics., • Familiarity with M/W/DBE requirements and other construction contract compliance requirements., • Experience preparing or supporting Job Hazard Analyses (JHAs) and other construction safety documentation., • Demonstrated ability to work under the direction of a Project Manager while progressively taking on greater responsibility and developing toward independent project management.

Role: Commercial Superintendent Location: New York City, NY (All Boroughs) Salary: up to $150K + Benefits (Healthcare 100% covered) Please Note: Must be able to run their own projects An established New York City general contractor with a strong portfolio of projects across the commercial, hospitality, healthcare and education sectors is looking to appoint an experienced Superintendent to join its growing field operations team. This is an excellent opportunity for a hands-on Superintendent who can take ownership of day-to-day site operations, coordinate multiple trades and drive projects from mobilization through completion while maintaining high standards of safety, quality and workmanship. Responsibilities • Take full ownership of day-to-day field operations, overseeing all construction activities from initial mobilization through final completion., • Coordinate and supervise subcontractors, tradespeople, vendors and site personnel, ensuring work is properly sequenced and executed in accordance with project specifications., • Develop, maintain and drive project schedules, coordinating manpower, material deliveries, equipment and subcontractor activities to maintain progress and meet critical milestones., • Oversee commercial interior fit-outs, hospitality renovations, healthcare construction, educational facilities and other complex building projects., • Manage multiple phases of interior construction, including demolition, framing, drywall, ceilings, flooring, millwork, MEP installations, finishes and final commissioning., • Coordinate closely with Project Managers, architects, engineers, consultants and ownership representatives to resolve field issues and maintain clear communication throughout the project., • Review construction drawings, specifications and shop drawings, identifying potential conflicts, discrepancies and constructability issues before they impact progress., • Maintain a proactive approach to site logistics, scheduling, procurement and material coordination, ensuring the project remains organized and efficient., • Enforce strict site safety protocols, conducting regular inspections, toolbox talks and safety meetings while maintaining compliance with NYC DOB and applicable OSHA requirements., • Monitor workmanship and installation quality, ensuring all work meets project specifications, building codes and client expectations., • Coordinate inspections, testing, commissioning and sign-offs, particularly on projects involving healthcare and other regulated environments., • Maintain accurate daily reports, progress updates, manpower records, site documentation and construction schedules., • Identify potential delays, field challenges and additional scope requirements, working alongside the project management team to implement solutions., • Oversee punch-list completion, final inspections, subcontractor closeout and project turnover. Requirements • 4+ years of experience working as a Superintendent within the NYC construction market., • Demonstrated experience overseeing commercial construction, interior renovations and/or ground-up projects., • Strong knowledge of construction means and methods, sequencing, scheduling and subcontractor coordination., • Experience managing multiple trades and maintaining control of busy, active construction sites., • Ability to read and interpret architectural, structural and MEP drawings., • Strong understanding of NYC building codes, DOB requirements and construction safety regulations., • Excellent organizational, communication and problem-solving skills., • Ability to take ownership of projects, work independently and maintain strong relationships with clients, subcontractors and project teams., • NYC SST Supervisor card required; additional NYC DOB credentials preferred. Compensation & Benefits • Competitive base salary, dependent on experience., • Comprehensive benefits package., • Opportunity to work across a diverse portfolio of commercial, hospitality, healthcare and educational projects., • Long-term opportunity with an established NYC general contractor., • 100% Healthcare covered

Job DescriptionOur values start with our people, join a team that values you! Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience. As part of our team, you will experience: • Success. Our winning team pursues excellence while learning and evolving., • Career growth. We develop industry leading talent because Ross grows when our people grow., • Teamwork. We work together to solve the hard problems and find the right solution., • Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community. Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams. GENERAL PURPOSE:This position provides a visible presence at the Store entrances/exits, mitigating theft and fraud and maintaining a safe and secure environment for Associates and Customers. The Specialist makes eye contact, smiles, and greets all Customers in a prominent, courteous and friendly manner deterring opportunity for theft by demonstrating "command" presence in a Company issued vest/required black attire, and monitoring the Code 50 package inspection policy. Walks sales floor to identify and address potential theft indicators, as directed by Store Leadership. Partners with Store Leadership to ensure compliance with Loss Prevention directives and minimization of operational shortage. Must embrace Company values and have a mentality to protect the Ross treasure. ESSENTIAL FUNCTIONS:Maintaining Safe & Secure Environment: • Understands that safety is the number one priority and practices safe behaviors in everything they do and assists Store Leadership in maintaining a safe and secure environment for both Associates and Customers., • Provides visible "command" presence, including prominent greetings with eye contact, at Store entrances/exits and on sales floor in a Company issued vest/required black attire, monitoring for potential safety issues., • Removes clutter and ensures safe, clear egress to emergency exits.Developing Great Teams & Partnerships:, • Provides great Customer service by prominently greeting Customers, making eye contact, smiling and answering questions in a friendly and courteous manner., • Treats all Customers and Associates with respect., • Demonstrates courtesy, friendliness, and professionalism at all times. Recognizes Associates using Company recognition programs., • Regular involvement with internal and external partners. May include conference calls, scheduled district meetings, educating Associates, providing recognition, etc., • Other duties as assigned to support Loss Prevention initiatives.Personal and Store Brand:, • Represents and supports the Company brand at all times., • Maintains a professional appearance, in accordance with Company dress code.Mitigating Theft & Fraud:, • Monitors entrances/exits as well as sales floor for potential theft by identifying suspicious behavior., • Gathers theft indicators and uses internal or external intelligence to impact shortage trends. Effectively communicates to Store Leadership and Loss Prevention Leadership., • Adheres to Company policy for external theft response., • Executes all Company Best Practices and maximizes productivity by minimizing steps and touches while working.Minimizing Operational Shortage:, • Increases Store awareness on effective processes to minimize operational shortage. Trains and educates Associates on shortage reduction initiatives., • Observes and validates proper checkout procedures for Customers and Associates. COMPETENCIES: • Manages Work Processes., • Business Acumen., • Plans, Aligns & Prioritizes., • Builds Talent., • Collaborates., • Leading by Example., • Communicates Effectively., • Ensures Accountability & Execution. QUALIFICATIONS AND SPECIAL SKILLS REQUIRED: • High School education or equivalent required, AA degree preferred., • One year retail supervisor experience or similar training preferred., • One year loss prevention/security training preferred., • Active Security Guard License preferred., • Ability to work effectively in a fast-paced environment., • Strong communication skills., • Demonstrated ability to build and maintain relationships with the Store team., • Excellent Customer service skills., • Proven ability to effectively resolve conflict., • Must be able to comply with all applicable federal and state laws and regulations for security positions, including but not limited to, additional background screening, physical examination, fingerprinting and/or drug and alcohol testing. PHYSICAL REQUIREMENTS/ADA: • Consistent timeliness and regular attendance., • Ability to spend up to 100% of working time standing, walking, and moving around the Store., • Must be able to raise or lower objects more than 25 lbs., from one level to another (includes upward pulling)., • Must be able to regularly bend, stoop, or crouch (frequency and duration will vary per daily business need)., • Certain assignments may require other qualifications and skills. SUPERVISORY RESPONSIBILITIES:None DISCLAIMERThis job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. COMPENSATIONThe base pay range for this role is $17.00 - $17.50. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location.

Job Description Friends of the High Line is seeking dynamic and experienced Store Associates to join its flagship retail store. The High Line Shop is located in a high-visibility, high-traffic area of the park, and blends commerce, culture, and community. All proceeds from the store support the maintenance, operations, and programming of the High Line. This is a unique opportunity to contribute to a new kind of retail experience in New York City. Beyond strengthening the long-term financial resilience of the park, the High Line Shop elevates the visitor experience. Store Associates, working with and reporting to the Store Manager and Store Supervisor, work to achieve optimal customer conversion and ensure that the store is a vibrant, mission-aligned extension of the High Line experience. Responsibilities include, but are not limited to: driving sales and maximizing store profitability, delivering exceptional customer service, assisting with e-commerce fulfillment, and acting as an ambassador for the High Line. Responsibilities • Deliver and maintain an extraordinary customer experience, • Implement strategies to drive traffic, maximize sales, and achieve store performance targets, • Ensure the store is impeccably maintained and organized, following visual merchandising standards, brand guidelines, and product rotations, • Create a warm, inclusive, and informative retail environment that reflects the diverse audience of the High Line, • Contribute to a positive team culture rooted in hospitality, respect, inclusivity, and enthusiasm for the High Line, • Maintain a working knowledge of products and retail partnerships, as well as the High Line’s broader history and art, horticulture, and cultural programming, • Resolve customer concerns with professionalism and care, escalating to the Store management when appropriate, • Assist with e-commerce fulfillment including managing and organizing inventory, processing shipments, and monitoring and responding to customer inquiries and concerns Requirements Preferred Qualifications • Previous experience in a retail or hospitality role, • Demonstrated ability to work in fast paced environment, • Outstanding communication, problem solving, and conflict resolution skills, • Warm, engaging presence and a strong commitment to the highest standards of hospitality and customer service, • Ability to work as part of a team, • Passion for the arts, design, sustainability, parks, and cultural storytelling, • Enthusiasm for public engagement, education, and tailoring communication to diverse audiences, • Desired qualities: attention to detail, calm under pressure, adaptable, dependable/reliable, team player, initiative, sales-personship, eye for visual merchandising, ability to multi-task Physical Requirements • Comfortable working in a mixed indoor/outdoor environment, • Ability to stand for extended periods, • Capacity to lift and move products up to 40 lbs regularly This is a part-time, non-exempt position. Seasonal, year-round, and flexible-schedule positions are available. The hourly rate for this position is $22.00/hour. This is an onsite role, located on the High Line in Manhattan’s Meatpacking District in New York City. The High Line Shop is located in a covered, open-air section of the park. Store Associate positions require flexibility to work weekends, holidays, and extended hours to support occasional special events and park programming. The High Line Shop is open 10:00AM - 4:00PM Monday - Friday and 9:00AM Saturday and Sunday on the park. Our Chelsea Market Pop-Up is open 11:00AM - 7:00PM daily, but closed on Tuesdays. Target Start Date: We review applications continuously. Because hiring decisions are made in response to immediate business needs, we encourage early submissions. This posting may close once suitable candidates are hired. Benefits • Paid Time off, including sick time off and paid holidays, • Discounts Citi Bike Membership, • Discounts with Vendor at the High Line & around the Meatpacking neighborhood, • Free entrance to Whitney Museum, • Contribution in a 403(b) retirement plan, • Employee Assistance Program About Friends of the High Line: The High Line is both a nonprofit organization and a public park on the West Side of Manhattan. We’re devoted to reimagining public spaces to create connected, healthy neighborhoods and cities through our work with communities on and off the High Line. Built on a historic, elevated rail line, the High Line was always intended to be more than a park. You can walk through the gardens, view art, experience a performance, enjoy food or beverage, or connect with friends and neighbors while enjoying a unique perspective of New York City. Nearly 100% of our annual budget comes through donations. The High Line is owned by the City of New York, and we operate under a license agreement with NYC Parks. EEO Statement: The High Line is guided by a series of values through which we make decisions, including hiring. These values include proactively creating access points for all people, regardless of age, sex, color, creed, race, income, country of origin, religion, sexual orientation, or gender identity. As part of our commitment to living up to these values and advancing equity within our organization and through our work, we are committed to an equitable hiring process. Hence, we strongly encourage applications from people with a broad range of lived experiences. This description shall not be construed as a contract of any sort for a specific period of employment. If you have a disability and need help with the application process: • Email peopleandculture@thehighline.org to request accommodations (like alternative formats, extra time, etc.) Important clarification: • This email is ONLY for requesting disability accommodations, • Resumes sent to this email won't receive special treatment in the selection process, • The only special consideration will be providing the specific accommodation you need to complete the application fairly

We are an inclusive, creative footwear and accessories brand powered by kindness. We want to empower our talent to be confident and true to themselves, the London way. London is our home, our heartbeat, and we draw inspiration from the energy and spirit of the city; its diversity and creativity. For over fifty years our team of in-house shoe and accessory designers have been creating authentic, distinctive designs from our London headquarters. The rainbow is our signature. It represents the good energy and love we have for our community and the many ways we collectively express our individual style. Provide excellent customer service by greeting and assisting customers in a friendly and professional manner, working towards specific supervisor targets Actively engage with customers to understand their needs, offer product recommendations Stay informed about current products, trends and promotions to provide up-to-date information to customers Supporting with visual merchandising of the store Maintain store standards throughout the store, including the back of house Be a role model for the brand and maintain personal presentation standards Ensure all products are properly tagged with accurate pricing and product information Process transactions accurately and efficiently using the point of sales system, handling cash, credit cards and other forms of payment Proficient in using and training the team on how to deal with customer service issues Closing and opening the store, as well as setting up the cash register Setting daily team targets and agenda in absence of the manager Coaching and developing sales assistants, supporting them in delivering their sales targets Support with inventory management and organization of stockroom Replenish the shop floor as and when necessary Communicate daily needs with the management team Supervise the team and coordinate break times Report daily activities to the management team

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

At Drybar, our philosophy is simple: Focus on one thing and be the best at it. For us that's blowouts. Our tagline says it all: No cuts. No color. Just blowouts. Drybar Assistant Shops Manager/Cosmetologist Benefits: • Competitive hourly wages beginning at $22.00 per hour plus tips, retail & productivity bonuses, $100 anniversary gift and referral bonuses! ($1.50 for every add-on performed. Over 20 blowouts, you make $3 extra for each blowout, get up to $10 for every membership you sell), • Medical, Dental & Vision Benefits for ALL employees. Access to Wellable and EAP access!, • Paid Training on "Proper Anatomy of a Drybar Blowout!", • Complimentary access & discounts to Vidal Sassoon online membership program for continued education., • We LOVE to promote from within! If you have what it takes, we got you covered., • FREE BLOWOUTS for all employees! We are looking for an Assistant Shop Manager who has: • A current and valid cosmetology license for the state in which you are applying., • Shampoo, blow-dry and amazing hair styling & finishing skills. Ability to do a blowout in under 45 minutes!, • Supervise shop staff on any given shift assigned: Bartenders & Stylist & Shift Lead., • Lead team members to enhance field performance, client experience, product sales, cost control, staffing, team development, client experience and membership sales., • Ensure talent development within shop to maximize performance, drive revenue, and achieve annual business goals., • Work closely with Human Resources to cultivate employee relations, performance management, culture & development, values, safety initiatives and training., • Monitor shop inventory: regularly check back bar and retail supplies, place orders when needed to meet supply level standards., • Work closely with your Area Manager to maximize the shops financial potential, by achieving daily sales metrics and labor budget goals., • Train new staff: educate on using Booker and Drybar's 10 core values. Ensure Stylists are completing blowouts in under 45 minutes., • A desire to provide exceptional service not only to our clients but to our staff. Implement problem solving strategies and maintain awareness., • Responsible for reporting all shop inventory, regularly check all retail supplies, assist with stocking products and supplies., • Strong communication skills and a commitment and dedication to customer service., • Ensure that all company procedures and policies, federal, state, and local regulations are followed. Ensure all Drybar's timekeeping policy and supervisor policy addendum., • Responsible for reporting all time worked for self and others in a timely fashion., • Resolve team member relations and customer issues ensuring the company is protected against liability with mindfulness of shop morale and culture. When in doubt, ask for help! We're here for you! #wearefamily Apply today to see if the Drybar Shops brand is a great fit for you. We would love to meet you and discuss the possibility of a long and rewarding career!

Since its founding in 1937, Krispy Kreme's focus has remained the same - making fresh doughnuts using our founder's original recipe.The brand's iconic Hot Light lets consumers know when doughnuts are being made in the shop so they can stop in and enjoy them hot, right off the line.We are seeking Shi

Job DescriptionOur values start with our people, join a team that values you! Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience. As part of our team, you will experience: • Success. Our winning team pursues excellence while learning and evolving., • Career growth. We develop industry leading talent because Ross grows when our people grow., • Teamwork. We work together to solve the hard problems and find the right solution., • Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community. Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams. GENERAL PURPOSE: This position provides a visible presence at the Store entrances/exits, mitigating theft and fraud and maintaining a safe and secure environment for Associates and Customers. The Specialist makes eye contact, smiles, and greets all Customers in a prominent, courteous and friendly manner deterring opportunity for theft by demonstrating "command" presence in a Company issued vest/required black attire, and monitoring the Code 50 package inspection policy. Walks sales floor to identify and address potential theft indicators, as directed by Store Leadership. Partners with Store Leadership to ensure compliance with Loss Prevention directives and minimization of operational shortage. Must embrace Company values and have a mentality to protect the Ross treasure. ESSENTIAL FUNCTIONS: Maintaining Safe & Secure Environment: • Understands that safety is the number one priority and practices safe behaviors in everything they do and assists Store Leadership in maintaining a safe and secure environment for both Associates and Customers., • Provides visible "command" presence, including prominent greetings with eye contact, at Store entrances/exits and on sales floor in a Company issued vest/required black attire, monitoring for potential safety issues., • Removes clutter and ensures safe, clear egress to emergency exits.Developing Great Teams & Partnerships:, • Provides great Customer service by prominently greeting Customers, making eye contact, smiling and answering questions in a friendly and courteous manner., • Treats all Customers and Associates with respect., • Demonstrates courtesy, friendliness, and professionalism at all times. Recognizes Associates using Company recognition programs., • Regular involvement with internal and external partners. May include conference calls, scheduled district meetings, educating Associates, providing recognition, etc., • Other duties as assigned to support Loss Prevention initiatives.Personal and Store Brand:, • Represents and supports the Company brand at all times., • Maintains a professional appearance, in accordance with Company dress code.Mitigating Theft & Fraud:, • Monitors entrances/exits as well as sales floor for potential theft by identifying suspicious behavior., • Gathers theft indicators and uses internal or external intelligence to impact shortage trends. Effectively communicates to Store Leadership and Loss Prevention Leadership., • Adheres to Company policy for external theft response., • Executes all Company Best Practices and maximizes productivity by minimizing steps and touches while working.Minimizing Operational Shortage:, • Increases Store awareness on effective processes to minimize operational shortage. Trains and educates Associates on shortage reduction initiatives., • Observes and validates proper checkout procedures for Customers and Associates. COMPETENCIES: • Manages Work Processes., • Business Acumen., • Plans, Aligns & Prioritizes., • Builds Talent., • Collaborates., • Leading by Example., • Communicates Effectively., • Ensures Accountability & Execution. QUALIFICATIONS AND SPECIAL SKILLS REQUIRED: • High School education or equivalent required, AA degree preferred., • One year retail supervisor experience or similar training preferred., • One year loss prevention/security training preferred., • Active Security Guard License preferred., • Ability to work effectively in a fast-paced environment., • Strong communication skills., • Demonstrated ability to build and maintain relationships with the Store team., • Excellent Customer service skills., • Proven ability to effectively resolve conflict., • Must be able to comply with all applicable federal and state laws and regulations for security positions, including but not limited to, additional background screening, physical examination, fingerprinting and/or drug and alcohol testing. PHYSICAL REQUIREMENTS/ADA: • Consistent timeliness and regular attendance., • Ability to spend up to 100% of working time standing, walking, and moving around the Store., • Must be able to raise or lower objects more than 25 lbs., from one level to another (includes upward pulling)., • Must be able to regularly bend, stoop, or crouch (frequency and duration will vary per daily business need)., • Certain assignments may require other qualifications and skills. SUPERVISORY RESPONSIBILITIES: None DISCLAIMER This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. COMPENSATION The base pay range for this role is $17.00 - $17.50. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location.

Job Description Position Summary The City Hall Older Adult Center (CHOAC) is one of the largest older adult centers in New York City. It provides nutritious meals, vital services, and engaging activities to older adults from across the city. Recognized as a model for delivering high-quality, high-volume programming that is both culturally and linguistically responsive, CHOAC holds a prominent public profile and strong community visibility. We are currently seeking a dedicated Assistant Cook to join our food service team. The Assistant Cook will support Head Cook and other kitchen staff in preparing and serving congregate meals that meet the standards set by the NYC Department for the Aging (DFTA) and the Department of Health. This role plays a vital part in ensuring the health, safety, and satisfaction of our participants through high-quality meal service. Responsibilities: • Assist with daily food preparation, cooking, and packaging of grab-and-go meals for congregate services, • Transport, pack, and organize food supplies and related items to ensure efficient kitchen operations, • Participate in menu planning to support culturally appropriate and nutritious meal offerings, • Prepare and submit daily food cost reports to support budget tracking and compliance, • Help maintain accurate inventory and ensure proper storage and organization of food supplies, • Clean and sanitize all kitchen appliances, equipment, and storage areas; maintain cleanliness of the dining room and kitchen, including cupboards, shelves, racks, work surfaces, cooking equipment, dishes, and utensils, etc., • Assume full responsibility for meal preparation and service in the absence of the Head Cook, • Assist in planning food purchases from designated vendors and/or shop at local markets as needed, • Ensure all food service activities comply with NYC Department for the Aging (DFTA) and Department of Health (DOH) standards and regulations, • Attend staff meetings and participate in required trainings as directed by the supervisor Qualifications: • Minimum 1 year of relevant work experience, • Physical Exam and TB test required – Must be free of communicable illness, • Ability to lift up to 40 pounds and stand for long periods of time as needed, • Valid Food handler certificate protection certificate or the ability to obtain within 6 months, • Bilingual English/Asian Language preferred but not required;, • Must be able to read, write and speak some English Compensation: $20.50 per hour Hours: Monday - Friday 7:00AM to 3:00PM 35 hours per week We have a strong and vibrant work culture and offer excellent benefits including medical, dental, and vision insurance, 15 vacation days, 12 sick days, 3 personal days, and 12 paid agency-wide holidays annually. Hamilton-Madison House is an Equal Opportunity Employer

Job Description Location: Long Island City, NY Schedule: Full-Time | 37.5 Hours per Week Pay: $80,000 - $86,000 per year Lead Operations. Manage Logistics. Keep Events Running. Our client is currently seeking a hands-on Timing Device Shop Group Leader to oversee warehouse operations, inventory management, equipment repairs, and logistics for a team that supports high-profile events and permanent installations nationwide. This is an excellent opportunity for a mechanically inclined leader who enjoys being actively involved in daily operations while managing a team, coordinating shipments, maintaining inventory, and ensuring equipment is event-ready. If you're equally comfortable leading people, troubleshooting equipment, and keeping operations organized, we'd love to hear from you. What You'll Do • Lead the daily operations of a warehouse and repair shop environment, • Supervise and support a team of technicians, including assigning work and managing priorities, • Coordinate equipment maintenance, repairs, testing, and refurbishment, • Ensure all equipment is fully operational and ready for deployment, • Manage inventory of equipment, tools, replacement parts, and event materials, • Oversee incoming and outgoing shipments across the United States, • Receive, inspect, and process equipment deliveries and returns, • Prepare equipment and materials for upcoming events and installations, • Support field technicians before, during, and after deployments, • Coordinate service calls and maintenance activities for permanent installations, • Assist with new equipment installations and ongoing operational support, • Develop and maintain standard operating procedures (SOPs), • Maintain a safe, organized, and efficient warehouse environment, • Troubleshoot mechanical and electrical issues as needed, • Perform hands-on repairs using hand tools, power tools, and soldering equipment What We're Looking For • 3+ years of experience in warehouse operations, logistics, inventory management, manufacturing, distribution, or a related environment, • Prior supervisory, team lead, or management experience preferred, • Strong mechanical aptitude and troubleshooting skills, • Experience with electrical or electronics repair, • Comfortable working with hand tools, power tools, and soldering equipment, • Strong organizational and inventory management skills, • Ability to manage multiple projects and deadlines in a fast-paced environment, • Proficiency with Microsoft Office, • Excellent communication and problem-solving skills, • Forklift experience is a plus, • Ability to create, implement, and enforce operational procedures, • Willingness to occasionally travel and support events during evenings or weekends Ideal Backgrounds Candidates may come from a variety of industries, including: • Warehouse Operations Supervisor, • Shipping & Receiving Manager, • Warehouse Manager, • Distribution Center Supervisor, • Manufacturing or Production Supervisor, • Event Production Warehouse Manager, • Electronics Repair Supervisor, • Military Logistics or Supply Chain, • Operations Manager, • Small Business Owner with hands-on operational experience Physical Requirements • Regular standing, walking, and lifting throughout the workday, • Ability to move and carry equipment and materials, • Must be able to lift and/or carry up to 100 pounds occasionally, • Ability to work both indoors and outdoors as needed, • Occasional travel to support events and installations Why Apply? This role offers the unique opportunity to combine leadership, logistics, warehouse operations, inventory control, and hands-on technical work in a dynamic environment supporting major events across the country. If you're someone who enjoys solving problems, leading a team, and making sure equipment gets where it needs to be on time and in top working condition, we'd love to hear from you. Competitive salary: $80,000 - $86,000 annually plus opportunities to work on exciting nationwide projects.

Job Description Job Description: Our Leaders support and coach the team to ensure they reach their potential, in both the shop and the kitchen. As a Leader your area of expertise is the knowledge and standards of leading a successful front of house or kitchen operation. Our Leaders take pride in leading our team and being the gatekeepers of safety and standards. People at Pret work hard, have fun, learn a lot and really grow. Everything we do as a business is built on the enthusiasm and professionalism of our leaders. At Pret, we have a dedicated Academy that ensures the right training, development and support of our wonderful people. There are opportunities for our Leaders to progress towards an Assistant Manager role. Job Type: Full-time Pay: $21.00 per hour + Tips + Mystery Shopper Bonus Referral Bonus: $100.00 Benefits: • Health, Dental and Vision Benefits, • Weekly Mystery Shopper bonus plan, • 401K retirement plan, • Generous Paid Time Off, • Company sponsored Life Insurance + STD and LTD offerings, • Child Bonding Leave, • The Pret Academy, which supports the training and development for our wonderful people, • Quarterly nationwide team events, • Free breakfast and lunch when working – including generous discounts when you’re not, • Transit program, FSA and HSAs available, • A friendly, fun, and fast paced environment with passionate teams to work with, • Pet Insurance Shift: 8 hour shift Required: A Valid NYC Food Handler Card and at least one year of Restaurant Leader/Supervisor experience. About Us: Pret A Manger (Pret), a Food To Go and coffee shop franchise chain that serves freshly made food and organic coffee. Empire operates Pret A Manger shops in NYC, DC and Philadelphia and is expanding rapidly. Empire is headquartered in New York City. We are an Equal Opportunity Employer: We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. We use eVerify to confirm U.S. Employment eligibility.

Job Description Cohere Beauty is a diverse team of strategic collaborators, product innovators, R and D formulators, and manufacturing professionals. Built on beauty and rooted in quality, our promise is to collaborate, co-innovate, co-develop, and co-manufacture. Promoting diversity and sustainability through our facilities and supply chains, Cohere Beauty’s approach to social, safety, and environmental responsibility is grounded in a commitment to our employees, customers, and the communities where we live and work. At Cohere Beauty, we’re here for what’s next. Job Summary The Maintenance Technician is responsible for providing ongoing safe preventative maintenance and repairs to the production line and assembly equipment, minimizing downtime, preventing damaged products or lost products, and helping set up, change over, and troubleshoot malfunctions on the production lines. This is what you will do: • Comply with all company Policies, Standard Operating Procedures, and Safety Rules and attend company-scheduled training., • Complete all preventive maintenance to assigned line or equipment, clean, lubricate, and adjust parts, equipment, and machinery., • Complete required production line setups with minimal follow-up in an expeditious manner., • Troubleshoot problems as they arise and devise appropriate solutions., • Determine appropriate measures for avoiding future problems., • Make recommendations for changeover, operational, quality, and efficiency improvements., • Comply with all Company Safety Procedures including lock-out/tag-out and any others that apply., • Monitor all adjustments, speeds, and moving components during runs., • Report problems, hazards, concerns operator errors, and other issues to Production Supervisor or Maintenance Supervisor as needed., • Maintain all company records and tools in good operating condition and complete all required documentation accurately., • Maintain the Maintenance Shop in a clean and organized manner., • Maintain line equipment cabinets in a clean and organized manner., • Communicate effectively with others., • Perform work onsite., • Perform other duties as assigned. This is what you will need: • High School or equivalent (Minimum All positions) Maintenance Technician I Required knowledge, skills, and abilities: • Advanced mechanical aptitude, • 1 year of vocational training or equivalent work experience on production line equipment or related machinery, • Basic comprehension of electrical systems, hydraulic operations, and pneumatic components, • Intermediate level reading, writing, and math abilities (high school level), • Ability to maintain regular, reliable, and predictable attendance. Preferred knowledge, skills, and abilities: • Specific vocational training on high-speed production filling equipment, • Certifications in welding, or advanced electrical skills, • Certified boiler technician, • Advanced level skills in math, reading, and writing, • Training in Quality Control or TQM, • 3 years’ experience in building, automotive, or production maintenance Minimum education and experience: • High school or equivalent, • 1 year of work experience in a related maintenance field Maintenance Technician II Required knowledge, skills, and abilities: • Advanced mechanical aptitude, • 3 years of vocational training or equivalent work experience on production line equipment or related machinery, • Intermediate comprehension of electrical systems, hydraulic operations, and pneumatic components, • Intermediate level reading, writing, and math abilities (high school level) Preferred knowledge, skills, and abilities: • Specific vocational training on high-speed production filling equipment, • Certifications in welding, or advanced electrical skills, • Certified boiler technician, • Advanced level skills in math, reading, and writing, • Training in Quality Control or TQM, • 3-5 years’ experience in building, automotive, or production maintenance Minimum education and experience: (any required certification) • High school or equivalent, • 3 years of work experience in the related maintenance field Maintenance Technician III Required knowledge, skills, and abilities: • Advanced mechanical aptitude, • 3 years of vocational training and/or 6 years of work experience on production line equipment or related machinery, • Advanced comprehension of electrical systems, hydraulic operations, and pneumatic components, • Intermediate level reading, writing, and math abilities (high school level) Preferred knowledge, skills, and abilities: • Specific vocational training on high-speed production filling equipment, • Certifications in welding and electrical and hydraulic systems, • Certified boiler technician, • Advanced level skills in math, reading, and writing, • Training in Quality Control or TQM, • 6 years or more experience in building, automotive, or production maintenance Minimum education and experience: • High school or equivalent, • 6 years of work experience or equivalent knowledge in a closely related maintenance field Maintenance Technician IV Required knowledge, skills, and abilities: • Advanced mechanical/electrical aptitude, • 3 years of vocational training and/or 6 years of work experience on production line equipment or related machinery, • Understanding of electrical circuit design, • Ability to read electrical prints and schematics and troubleshoot electrical circuits up to 460V., • Experience with diagnostic testing equipment for electrical devices, • Working knowledge of motor controls, variable frequency drives, servo drives, • Working knowledge of automation control, PLCs, and programming, • Advanced comprehension of electrical systems, hydraulic operations, and pneumatic components, • Intermediate level computer knowledge, • Advanced level reading, writing, and math abilities Knowledge, Skills & Abilities • Basic reading, writing, and math skills., • Ability to inspect work and make quality control decisions., • Ability to use accurate weights and measurement equipment in metrics., • Ability to read, write, and speak English competently., • Ability to maintain regular, reliable, and predictable attendance. Preferred Knowledge, Certifications, Skills & Abilities • Advanced technical training in an electrical or mechanical discipline., • Ability to read, write, and speak Spanish competently is preferred. We enthusiastically welcome your application, as we recognize the invaluable perspective, experience, and potential you possess. Apply with us today! Together, we win!

Job Description Work Authorization: Applicants must currently be authorized to work in the United States on a full-time basis. Steven Winter Associates (SWA) does not sponsor employment-based visas (e.g., H-1B, OPT, etc.) for this position, now or in the future. Why Steven Winter Associates? At SWA, you’re not just joining a company, you’re joining an employee-owned team committed to making buildings healthier, more sustainable, and lower-carbon. • Be part of a collaborative and supportive environment where your ideas matter., • Work on real projects, seeing the impact of your work in the field and in communities., • Learn from experienced building science professionals. Join us and be part of a company where your work shapes a better future, and your voice matters. Learn more at www.swinter.com. Why This Role Matters: Steven Winter Associates, Inc. (SWA) is looking for a Senior Building Enclosure Consultant to contribute to its growing enclosure consulting team in New York. We are seeking a motivated, organized, and dedicated individual to learn, grow and thrive with us. The ideal candidate is passionate, experienced and knowledgeable about high-performance buildings, in particular, building enclosure systems. SWA works on a variety of building types, from historic properties to new and retrofit passive house projects. Our approach is science-based, technically comprehensive, and practiced with a designer's eye. Our Building Enclosures team works directly with our sustainability and energy teams in providing building owners and clients the SWA Whole Building Approach. This is a growth opportunity in a compelling environment with many high-profile projects. The proposed annual salary range for this position is $115,000 - $130,000 based on a 40-hour work schedule. The final salary may vary depending on confirmed job-related skills and experience. Responsibilities: • Perform existing building enclosure condition assessments and reporting., • Review and mark-up architectural drawings throughout the design process, from schematic design to CDs., • Provide preliminary specifications for cladding, water-management, air-barrier, and thermal systems., • Develop sketch details for enclosure systems, including waterproofing, air-barriers, thermal-barriers, and cladding., • Attend design meetings and provide on-going support to the entire project team., • Perform site inspections, prepare and issue site inspection field reports., • Perform analyses during design phases and diagnostic testing during construction phases., • Review construction administration submittals and shop drawings., • Assist the SWA team in project management and support day-to-day operations., • Communicate effectively and promptly with colleagues, clients, and project teams via email, teleconference, and telephone. Secondary Responsibilities: Depending on project and skill sets these may include: • Managing project budgets and staffing., • Design concept and analysis results presentations to client and design team. Who You Are: • Bachelor’s degree in architecture, engineering, construction management or a related field, or equivalent experience. Licensed RA or PE preferred., • 10+ years of relevant & direct experience in building enclosure systems. What You Bring: • Experience with new and existing construction., • Experience with thermal and moisture management systems., • Experience in both AutoCAD, and Bluebeam., • General understanding of building science in buildings., • Outstanding organizational skills., • Proficient in MS Office suite. What will make you stand out: • Familiarity with Passive House, and other certification programs, is a plus., • Familiarity with THERM and WUFI analytical programs. Other duties: responsibilities, and activities may change. Changes to role will be discussed as they are desired / needed. How to Apply: • A cover letter is requested for consideration outlining interest., • Resumes will be reviewed on a rolling basis. Qualified candidates will be invited to an initial phone interview., • If you meet at least 75% of the qualifications, we encourage you to apply., • SWA is committed to inclusion and will provide reasonable accommodation for individuals with disabilities. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to type, reach with hands and arms, talk, and hear. The employee frequently is required to climb stairs, use elevators and exterior construction hoists, and may be exposed to cold and hot interior and exterior temperatures for extended periods of time (when in the field). Travel Requirements: Occasional overnight travel may be required (less than 5%). Frequent local field visits in the NYC Metro area will be necessary (estimated 10-20%). A valid and clean driving license is required. Working Environment: All team members are expected in the office at least three days per week, with flexibility based on job duties and site work. Most duties are performed in an office environment, with periodic field visits to project sites for observations, testing, and training. Work-from-home flexibility is subject to supervisor approval. Benefits and Perks: SWA invests in our people, and we’ve designed a benefits package tailored to meet the needs of our team to include medical, dental, vision, 401k (with match), commuter benefits, etc. Company Principles: Be visionary. Foster camaraderie. Take ownership. Think holistically. Improve the built environment. Agencies: Steven Winter Associates, Inc., is not partnering with agencies nor accepts unsolicited resumes and will not be responsible for any fees or expenses related to such unsolicited resumes and/or applicants. EEO AND DIVERSITY, EQUITY, AND INCLUSION (DEI): SWA is an Equal Opportunity Employer – all qualified applicants will be afforded equal employment opportunities without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, or marital status. Diversity, Equity, and Inclusion (DEI): SWA is a workplace where we are aware of and welcoming of the ways in which we are all diverse as evidenced by a culture of listening and understanding. We endeavor to create a workplace where people feel empowered to act; a safe place where people are open to discussing different views; ongoing education opportunities around diversity, equity, and inclusion; and to build a culture of belonging and accountability. What to Know: Steven Winter Associates, Inc. (SWA) is a proud employee-owned firm that’s been transforming the built environment for over 50 years. Our mission is to make buildings more sustainable, energy-efficient, accessible, healthy, and resilient, not just with better structures, but to the communities they serve. Working with architects, engineers, developers, owners, and project teams, our team of consultants is always pushing boundaries, collaborating, and problem-solving to deliver solutions that benefit people and the planet. Join us and become part of a company where your work helps shape a better built environment and where your voice matters. For further information on Steven Winter Associates, please visit http://www.swinter.com.

Job DescriptionParatransit Quality Control Specialist Location: Brooklyn Starting Pay: $17/per hour Schedule: Full-time | Various shifts including weekends and holidays Start Your Career in Transportation and Maintenance If you're looking for a hands-on job that can launch a career in the automotive or transportation industry, this is the place to start. As a Paratransit Quality Control Specialist, you'll play an essential role in keeping our vehicles clean, fueled, and ready to serve the community. This entry-level position provides exposure to a professional maintenance environment and opportunities to learn directly from our mechanics and maintenance leadership. Many of our employees have grown from this role into Mechanic, Maintenance Supervisor, or Paratransit Driver positions. What You'll Do • Maintain and fuel all paratransit vehicles to ensure they're ready for service each day., • Check and record fuel levels, take inventory readings, and complete standard fuel and variance reports., • Inspect vehicles for physical damage, tire pressure, and fluid levels such as oil, transmission, coolant, and windshield washer., • Keep vehicles and the yard clean - including light building and grounds maintenance., • Reposition vehicles in the lot as needed to support dispatch and morning operations., • Respond appropriately to fuel spills or safety issues, following established procedures., • Maintain accurate records and communicate with shop and operations leadership on any issues found.Who You Are, • At least 21 years old (required)., • High school diploma or equivalent., • Reliable, detail-oriented, and safety-focused., • Comfortable working outdoors in all seasons., • Able to bend, kneel, or stand for extended periods and perform physical tasks as needed., • Willing to work weekends, holidays, and extended hours when necessary., • Interested in growing within the automotive, transportation, or maintenance field.Why Join Us, • Gain hands-on experience in a professional maintenance shop environment., • Build relationships with mechanics and shop leadership., • Clear career pathways to become a Mechanic or Paratransit Driver., • Stable employment with a company that values reliability and growth. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description The Custom (Production) Shop Supervisor is responsible for overseeing daily production across the edge banding machines, dowel machine, skin application area, and sorting operations, ensuring smooth workflow, consistent quality, and production efficiency. This is a hands-on leadership role that requires strong mechanical and technical aptitude, the ability to understand and troubleshoot production equipment, and the skills to lead and support employees. The supervisor will work closely with the Department Manager, machine operators, and machine technician/maintenance team to keep production running effectively, with occasional flexibility to provide support beyond regular shift hours when needed. Schedule: M-Th 7:30am-4:30pm, F 7:30am-12:00pm Key Responsibilities • Supervise daily operations across two edge banding machines, the dowel machine, and the skin application area to meet production goals., • Oversee sorting activities, ensuring materials and components are accurately separated and directed to the appropriate production areas., • Lead, train, and support day shift employees, ensuring clear assignments, accountability, and consistent performance., • Develop a strong working knowledge of department machinery, including machine functions, settings, adjustments, and common operating issues., • Identify and troubleshoot basic machine problems, working with the machine technician/maintenance team when additional technical support is needed., • Monitor production flow, address delays, and coordinate priorities to minimize downtime and maintain efficiency., • Ensure products meet quality standards, identifying defects and correcting issues before they affect downstream operations., • Enforce safety procedures, proper machine operation, and a clean, organized work environment., • Communicate production updates, equipment concerns, and staffing needs to the Department Manager, including coordinating occasional overtime support for day shift production needs or night shift issues when necessary. Qualifications • Previous experience in manufacturing, woodworking, cabinetry, or a similar production environment preferred., • Strong mechanical and technical aptitude, with the ability to understand, learn, and troubleshoot industrial machinery., • Willingness and ability to complete hands-on training to become knowledgeable in the department's edge banding and doweling equipment., • Previous supervisory or team leadership experience preferred, with the ability to guide employees, maintain accountability, and resolve day-to-day issues., • Must be fluent in English and Spanish, with strong verbal communication skills to clearly instruct, train, and supervise employees in both languages., • Strong problem-solving skills and the ability to recognize mechanical or production issues and take appropriate action., • Good communication and organizational skills, with the ability to coordinate employees and production priorities., • Ability to work hands-on in a fast-paced manufacturing environment while maintaining high standards for safety, quality, and productivity., • Flexibility to occasionally work beyond regular day shift hours, when available, to assist with production demands or provide technical and operational support to the night shift. Benefits: • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Vision insurance

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations, • We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. Position Summary Lincoln Electric Products Co. Inc. we are seeking a proven Switchgear Project Manager to join its dynamic team and the growing organization. This role is available immediately and provides a great growth opportunity for the right candidate. It is a full-time, exempt position, and the candidate will report directly to the Project Manager-Supervisor. The successful candidate will be responsible for the initial design and project Management Of Electrical Distribution Equipment, including Panelboards, Switchboards, and Circuit breakers. At Lincoln Electric Products Co. Inc., Project Management begins at Stage 1, which is Engineering. This means the Project Manager is involved right from the start of the project lifecycle, leading the coordination of engineering activities, ensuring design specifications are met, and setting the foundation for successful execution. It's a hands-on role that combines technical understanding with cross-functional leadership. Job Responsibilities • Focus is switchgear projects for commercial construction, commercial facilities, and OEMs., • Collaborate with sales, engineering, and manufacturing teams., • Designing and drawing Switchboards/ Panelboards., • Reviewing outgoing engineering submittal drawings for technical and contractual accuracy., • Evaluating and interpreting customer specifications and drawings to create an accurate bill of materials., • Providing phone support and direct interaction with customers and employees to obtain sales, • Reviewing returned drawings and submittals of same, analyzing and processing mark-up/comments, and communicating changes to the internal and external stakeholders, • Review contract documents, interpret technical specifications to ensure product compliance, and prepare change order pricing and quotations if needed., • Coordinate and facilitate the completion of Short Circuit and Coordination Studies., • Releasing equipment for production and delivery to an in-house shop., • Coordinating deliveries with customers., • Enter orders into the company ERP software system., • Configure and order long lead time major materials/components for the project., • Perform visits to survey site layout and logistical challenges as needed., • Provide post-sales support for equipment. Requirements: Job Requirements • Bachelor’s degree in Electrical Engineering., • 3+ years within the industry., • Thorough knowledge of electrical power systems, • Good knowledge of Industry UL standards and NEC standards, • Proficiency with MS Excel., • Ability to collaborate with team members.

Job Description SITE SUPERVISOR - NYC Reports To General Superintendent Manages Subcontractor crew for installation Summary/Objective The Site Supervisor will provide onsite management, direct installation subcontractors effectively, plan installation sequences, obtain field dimensions, and complete our onsite presence safely. Manage onsite communication acting as the company representative and liaison between client, general contractor, and installers. To oversee safety best practices including daily JHA reporting, routine safety inspections, compliance with site safety program, and enforcing proper PPE. Ensure project schedule is being maintained and prepare two look-aheads. Understand the project scope and responsibilities of each vendor and subcontractor and demand the highest level of quality control. Adequately protect all existing finishes from damage and be responsible for making sure daily housekeeping is satisfactory. Primary Responsibilities/Functions • Planning and executing all installation of products onsite for specific projects., • Planning safety techniques/requirements, OSHA., • Completing and submitting any safety forms, onsite required documentation., • Taking field dimensions or assisting in coordination of field dimension., • Enforcing quality standards., • Daily reporting documentation. Required Skills/Attributes • Must have strong leadership skills to oversee and manage subcontracted installation crews, • Must have people skills in order to effectively communicate project progress and details with onsite client project managers and superintendents Required Education/Experience • High School Diploma, • 5 years industry experience minimum Required Certifications/Licenses • OSHA 30 Position KPIs • ZERO accidents and safety violations, • 100% attendance at site safety meetings, • 100% attendance at daily/weekly GC coordination meetings, • ZERO tickets signed for subcontractors unless authorized by Project Management, • 100% enforcement of quality control program and strive for ZERO Punchlist Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration when on a job site or in the shop, and may be exposed to shop conditions, ongoing construction and various weather conditions The noise level in the work environment can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit, talk and hear. The employee is frequently required to use hands to finger, handle or feel. The employee is required to reach with hands and arms. The employee is required to climb, balance, stoop, kneel, stand, crouch or crawl for prolonged periods. The employee must also lift and move up to 50 pounds. The employee is required to use one or two hands to grasp, move, or assemble objects. Use muscles to lift, push, pull, or carry heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Personal Protective Equipment Utilize PP&E in compliance with OSHA standard and per site specific safety programs. Position Type/Expected Hours of Work This is a full-time position (40 hours). Workdays are Monday through Friday, work times are dependent on department, projects, and supervisor’s request and approval. Off-hours work is occasionally required to adhere to site restrictions and project schedule. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Travel This position requires extensive travel throughout the United States, being located 6-24 months at a time on each project before moving on. The position can travel up to 100% of the year. Benefits & Incentives • Insurance, • Medical 100% sponsored by employer, • HSA with Company contribution, • Flexible Spending Accounts, • Vision, • Dental, • Life & AD&D policy 100% sponsored by employer, • Short term disability 100% sponsored by employer, • EAP, • Voluntary add-on policies & eligibility, • 401(k) with generous company match, • Paid Time Off, • PTO with rollover potential, • Bereavement, • Jury Duty, • 9 Paid Holidays, • New Years Day, • Synergi Day, • Good Friday, • Memorial Day, • Independence Day, • Labor Day, • Thanksgiving, • Friday after Thanksgiving, • Christmas, • Wellness Benefits, • Continued Education/Professional Development Allowances Company Culture & Perks • Career growth & development, • Giving back initiatives to the community, • Employee recognition programs, • Happy hours, • Company parties, celebrations, and catered lunches regularly throughout the year, • Raffles, trivia, etc. throughout the year with prizes, • Lunch & learns, • Quarterly team building, • Quarterly company updates from CEO

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description Position Summary The Fedcap Group is seeking an experienced Digital Print and Mail Supervisor to lead daily production at our Banknote Building operation in the Bronx. This is an active shop-floor leadership role for a working print professional who can move jobs accurately from intake and prepress through digital production, bindery, packing, mailing, and delivery handoff. The supervisor will balance workload, assign staff, operate production equipment when needed, troubleshoot file and print-quality issues, and maintain dependable communication with management and internal customers. The right candidate combines technical print knowledge with calm, accountable supervision and consistent follow-through. What You Will Do • Lead daily production. Build and adjust the production schedule, assign work by operator and equipment, establish priorities, monitor due dates, and respond quickly to bottlenecks or equipment downtime. • Own job intake and preflight. Review job tickets, specifications, quantities, files, stock, finishing, mailing, delivery, and due dates., • Preflight PDFs and production files for page size, bleed, fonts, images, color space, pagination, variable data, and barcode requirements. • Operate digital production workflows. Use Fiery Command WorkStation to import, impose, program, queue, prioritize, release, reprint, and troubleshoot jobs, including media setup, duplex registration, calibration, color profiles, spot colors, and presets. • Support color and black-and-white production. Set up and operate high-volume digital equipment; match the press, sheet size, stock, run method, and finishing route to the job requirements. • Plan imposition and yield. Determine 1-up, 2-up, 4-up, and other layouts; account for trim, bleed, gutters, gripper or non-printable areas, spoilage, click costs, paper use, and finishing implications. • Direct bindery and booklet work. Supervise and perform cutting, folding, drilling, saddle stitching, perfect binding, tabbing, and wafer sealing. • Verify signatures, creep, page order, spine orientation, trim allowances, and final counts., • Maintain quality and mailing integrity. Complete first-piece, in-process, and final checks for file version, color, register, trim, folds, personalization, 2D barcodes, recipient accuracy, pack-out, labeling, and destination information. • Supervise and develop employees. Set daily expectations, train and coach press, bindery, and mailing staff, monitor performance and attendance, support cross-training, and maintain clear shift handoffs. • Protect equipment readiness and materials. Oversee operator maintenance, consumables, service calls, downtime tracking, inventory, and production supplies; reroute work when practical to protect deadlines. • Report performance. Provide clear updates on workload, completed quantities, backlogs, staffing, downtime, reprints, waste, risks, and expected completion dates. Production Equipment and Systems The production environment includes the systems below. Direct experience with every platform is not required, but candidates must bring strong transferable experience with comparable commercial, in-plant, transactional, or print-and-mail equipment. Category Equipment and systems Digital color presses Canon VarioPrint production printers Black-and-white presses Two Xerox Nuvera production printers, Canon Titan production printers, and an OCE production printer Addressing and envelope printing Kirk-Rudy inkjet addressing equipment and RISO and Xante digital envelope printers Finishing and bindery Production cutting, folding, drilling, saddle stitching, perfect binding, wafer sealing, and tabbing equipment Mailing and inserting Production mail inserting equipment and related mail-preparation and tray-handling workflows Software Fiery Command WorkStation, PlanetPress Connect, and BCC address-quality and presort software Required Qualifications • Five or more years of hands-on digital print production experience in a commercial, in-plant, transactional, or print-and-mail environment. • At least two years of experience leading employees, coordinating shifts, or supervising a production workflow., • Strong working knowledge of Fiery Command WorkStation, digital print queues, job properties, imposition, media setup, color management, and production troubleshooting. • Demonstrated experience operating high-volume digital color and black-and-white production printers., • Strong knowledge of common sheet sizes, text and cover stocks, coated and uncoated paper, weights, grain direction, feeding, and finishing suitability. • Ability to calculate imposition, production quantities, spoilage, sheets required, carton quantities, and finishing requirements., • Working knowledge of Adobe Acrobat Pro and common print-production applications; strong file handling, version control, and PDF preflight skills. • Hands-on experience with cutting, folding, booklet production, stitching, drilling, binding, tabbing, or comparable finishing processes., • Strong attention to detail, mechanical aptitude, organization, and the ability to lead multiple deadline-driven jobs., • Ability to stand for extended periods and safely move paper, supplies, and finished cartons consistent with the role. Preferred Qualifications • Experience with Xerox Nuvera, Canon VarioPrint, Canon Titan, OCE, or comparable production systems., • Experience with variable-data printing, 2D barcode or integrity-driven workflows, PlanetPress Connect, or watched folders., • Knowledge of inserting, inkjet addressing, CASS, NCOA, presort, postal documentation, and USPS acceptance requirements., • Experience tracking equipment downtime, root causes, spoilage, reprints, throughput, and on-time performance., • Graphic arts, prepress, color-management, or production-print certification. What Success Looks Like • At least 98 percent of jobs meet confirmed print, finishing, insertion, mailing, or delivery deadlines., • Every job receives documented first-piece, in-process, and final quality checks, with zero preventable wrong-recipient mailings., • Active jobs have a visible owner, machine assignment, route, priority, due date, and current status., • Files, imposition, sheet size, stock, quantity, grain, and finishing requirements are confirmed before production release., • Downtime and service calls are tracked, risks are escalated early, and production is rerouted when practical., • Preventable spoilage is tracked by root cause, with an initial target of 1 percent or less where measurement is reliable. Work Environment and Schedule This is a full-time, on-site position at the Banknote Building in the Bronx. The supervisor must remain visible on the production floor and available to support active jobs, equipment issues, staff questions, and deadline changes. Schedule flexibility and occasional overtime may be required based on production volume and client commitments. Why Join The Fedcap Group The Fedcap Group is committed to creating opportunities and improving lives through education, workforce development, and community-based services. This role offers the opportunity to lead a mission-connected production operation where accuracy, service, teamwork, and continuous improvement matter every day. Apply Submit a resume that clearly describes your hands-on digital print-production experience, Fiery proficiency, production equipment knowledge, supervisory responsibilities, and experience with bindery or mailing operations. Equal Opportunity Employer \nCompany Description Mission: To create opportunities for people with barriers to economic well-being. In 1935, Fedcap Rehabilitation Services was founded by three men in NYC who had sustained injuries in WWI and literally changed the world for people with physical disabilities. It now provides an array of services to youth and adults helping thousands each year graduate from high school, obtain vocational certification or a college degree, become work ready, obtain meaningful employment and achieve long-term economic well-being. Renamed The Fedcap Group in 2018, Fedcap Rehabilitation Services continues to be a trailblazer in providing opportunities for people with challenges and disabilities and their families. People with disabilities are strongly encouraged to apply. We believe that a workforce inclusive of individuals with disabilities strengthens our organization and enhances our ability to deliver high-quality services to the communities we serve. EOE Mission: To create opportunities for people with barriers to economic well-being.\r\n\r\n\r\nIn 1935, Fedcap Rehabilitation Services was founded by three men in NYC who had sustained injuries in WWI and literally changed the world for people with physical disabilities. It now provides an array of services to youth and adults helping thousands each year graduate from high school, obtain vocational certification or a college degree, become work ready, obtain meaningful employment and achieve long-term economic well-being.\r\n\r\n\r\nRenamed The Fedcap Group in 2018, Fedcap Rehabilitation Services continues to be a trailblazer in providing opportunities for people with challenges and disabilities and their families.\r\n\r\n\r\nPeople with disabilities are strongly encouraged to apply. We believe that a workforce inclusive of individuals with disabilities strengthens our organization and enhances our ability to deliver high-quality services to the communities we serve.\r\n\r\nEOE

Job DescriptionDescription: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program Position Summary: • The Quality Inspector-Packer is responsible for inspecting, packaging, and preparing products for shipment in accordance with customer specifications, quality standards, and company procedures. This position performs mechanical and visual inspections, maintains accurate inspection and production records, and ensures that products are properly identified, documented, packed, and shipped.Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Key Responsibilities: Inspection and Packing: • Inspect and pack parts according to due date priority and follow approved specific packing instructions and supervisor guidance., • Interpret sales write-ups and special packaging instructions and accurately maintain charts and inspection recordkeeping., • Operate electronic counting scales and use the shop floor production control system to maintain accurate records for inspected and packed work, including pulling certifications and certificates of conformance., • Use ERP software to process work orders, maintain accurate inventory and transaction records, generate required documentation, and support production and shipping activities., • Use UPS, FedEx, and DHL shipping software to create shipping labels, prepare domestic and international shipment documentation, track shipments, and ensure accurate and timely customer deliveries. Quality Inspection: • Performs company quality control, technical and customer satisfaction activities., • Implements and follows inspection programs and instructions related to manufacturing objectives., • Operates all gages, software, vision systems and related SPC methodologies., • Documents and enforces Standard Operating Procedures (SOPs) within the ISO system. Non-essential Responsibilities: • Performs other duties as directed., • Supports broader inspection, packing, and shipping-related business objectives as needed. Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills and Abilities: • High school diploma or equivalent GED-level education, • In-house training is preferred. Manufacturing experience preferred., • Ability to read and interpret material cards and process sheets, follow written and verbal instructions, and use computers effectively., • Good manual dexterity, eye-hand coordination, and attention to detail in inspection and packaging work., • Experience with precision measuring equipment such as calipers, micrometers, pin gages, optical comparators, and visual measuring systems. Physical Requirements: • Must be able to regularly lift and/or move materials weighing up to 50 pounds as an essential function of the position., • Must be able to stand, walk, bend, reach, and perform other physical activities associated with the position. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment. Export Control Compliance Notice PrecisionX Group is subject to U.S. export control laws and regulations, including the International Traffic in Arms Regulations (ITAR). Positions at our company require access to export-controlled technical data and/or defense articles. Under these regulations, access is limited to “U.S. Persons,” which include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and individuals granted asylum or refugee status by the U.S. government. To be considered for this position, you must be a U.S. Person. As part of the application, you will be asked to confirm your status. Your response will be used solely to ensure compliance with U.S. export control laws and regulations.

Job Description Join the team behind four bespoke, destination restaurant and bar concepts at the Kimpton Era: Amasa, a street-level Latin Restaurant & Taqueria; Bar Rocco, an upscale NY Brasserie; The Parlor, an all-day coffee and cocktail lounge; and The Jade Rabbit, an Asian izakaya with 360-degree views of Rockefeller Center and Radio City. Summary: The Barista is responsible for delivering high-quality coffee and beverage service while providing an exceptional guest experience. This role requires strong product knowledge, attention to detail, speed, cleanliness, and a hospitality-first mindset. The Barista consistently prepares beverages to company standards, maintains a clean and organized workstation, and engages guests in a warm, professional manner. Responsibilities: • Greet guests promptly, warmly, and professionally., • Take guest orders accurately and efficiently, answering questions about menu items and ingredients., • Provide recommendations and upsell beverages or food items when appropriate., • Prepare espresso-based drinks, brewed coffee, tea, and specialty beverages according to established recipes and presentation standards., • Properly steam milk, pull espresso shots, and handle coffee equipment with precision and consistency., • Ensure beverage quality, taste, temperature, and appearance meet company standards., • Accurately customize drinks based on guest preferences and dietary needs., • Resolve guest concerns or complaints courteously and escalate issues to a supervisor as needed., • Maintain a positive, welcoming demeanor at all times, even during high-volume periods., • Operate the POS system efficiently and accurately., • Handle cash, credit cards, and other forms of payment in accordance with company cash-handling policies., • Balance cash drawer and report discrepancies to management., • Maintain the cleanliness of coffee machines, grinders, counters, bar area, and guest-facing spaces., • Follow proper sanitation, food safety, and health department regulations at all times., • Perform opening, mid-shift, and closing side work, including restocking, cleaning, and equipment maintenance., • Ensure supplies are stocked and notify management of low inventory., • Work collaboratively with other front-of-house staff, kitchen staff, and management to ensure smooth service., • Adhere to all company policies, including attendance, dress code, food safety, and workplace conduct., • Follow all local, state, and federal health and safety regulations., • Use equipment safely and report any maintenance or safety concerns promptly. Must Haves • Previous barista or coffee shop experience., • Familiarity with espresso machines and coffee brewing methods., • Knowledge of coffee origins, roasts, and basic latte art., • Experience with point-of-sale systems, • Ability to work flexible hours, including mornings, evenings, weekends, and holidays., • Strong guest service and interpersonal skills., • Ability to multitask and work efficiently in a fast-paced environment., • Ability to stand and walk for extended periods., • Ability to lift to 25–40 pounds. Employment Transparency It is our policy to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. We will endeavor to make a reasonable accommodation to the known limitations of qualified applicants and employees with a disability pursuant to the Americans with Disabilities Act and any applicable state and local laws, unless the accommodation would impose an undue hardship on the operation of our business. If you believe you require such assistance to apply for a position or to participate in an interview, please contact the Human Resources department. Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities, including essential job functions, may change at any time with or without notice, to the extent permitted by applicable law.

Job Description Overview US Facade is a leading curtain wall contractor specializing in high-end buildings in urban areas across the United States. We are actively seeking a motivated Assistant Project Manager (APM) to support our Senior Project Managers in the execution of complex facade projects. This is a pivotal support role where you will bridge the gap between design, fabrication, and on-site installation. You will work under the direct guidance of experienced Project Managers while gaining hands-on experience in managing scopes such as Window Walls, Curtain Walls, Storefronts, and Metal Panels. This position offers significant autonomy in daily tasks and provides a clear pathway for career advancement in the construction and real estate development industry. If you are interested in this position, please visit our website and submit your application through the link below: https://www.us-facade.com/services Responsibilities: Project Coordination & Administration: • Assist the Project Manager in the overall planning, direction, and coordination of project activities to ensure deadlines and cost objectives are met., • Manage the Submittal Process: Coordinate shop drawings and sample submissions between Architects, Engineers, Drafters, and Fabricators. Maintain accurate submittal logs and track approval statuses., • Document Control: Ensure the project team has the most up-to-date structural drawings, interface drawings, and revisions. Distribute updates to the Design and Site teams promptly. Schedule & Financial Support: • Assist in creating and updating Project Schedules based on client needs, factual durations, and lead times. Monitor milestones and flag potential delays to the PM., • Support the financial lifecycle of the project by assisting with Schedule of Values (SOV), preparing monthly requisitions (pay apps), and tracking Change Orders. Logistics & Supply Chain: • Coordinate Materials: Track fabrication status and coordinate the release of materials to align with the installation schedule., • Logistics Management: Coordinate deliveries to job sites, including verifying hoist/crane access, confirming trucking arrangements, and ensuring field personnel are notified and ready to receive materials. Site Operations & Quality Control: • Perform routine Site Visits to monitor progress and quality., • Field Reporting: Document site conditions, verify that work matches approved details, and generate field reports/punch lists., • Maintain daily communication with the Site Supervisor and field personnel to ensure they have the necessary resources, drawings, and materials to work efficiently., • Act as a liaison between the office and the field to resolve technical discrepancies or RFI (Request for Information) issues. Qualification: Education & Technical Skills: • Bachelor’s degree in Architecture, Civil Engineering, Construction Management, or a related field (Master’s degree is a plus)., • Proficiency in AutoCAD is required. (Ability to read and interpret architectural/structural drawings is essential)., • Strong command of Microsoft Office (Excel, Word, Project)., • Aptitude to learn new project management software (e.g., Procore, Bluebeam) quickly. Experience & Knowledge: • 1-3 years of experience in Construction Management, Project Engineering, or Architecture., • General knowledge of construction industry standards and practices., • Preferred: Familiarity with the Facade/Curtain Wall industry (Glass, Glazing, Metal Panels). Soft Skills & Languages: • Bilingual Required: Professional proficiency in English and Chinese Mandarin (Written & Verbal) to effectively communicate with internal teams and vendors., • Excellent organizational skills with high attention to detail., • Strong communication skills to effectively collaborate with GCs, Architects, and Field Teams. \nCompany Description We are a premier facade subcontractor specializing in high-end, high-rise, and mixed-use developments. With a focus on custom engineering and precision installation, we bridge the gap between architectural ambition and construction reality. Our mission is to deliver high-performing building envelopes that define skylines and stand the test of time. We don’t just install facades; we provide comprehensive solutions that ensure aesthetic integrity, energy efficiency, and structural durability. We are a premier facade subcontractor specializing in high-end, high-rise, and mixed-use developments. With a focus on custom engineering and precision installation, we bridge the gap between architectural ambition and construction reality. Our mission is to deliver high-performing building envelopes that define skylines and stand the test of time. We don’t just install facades; we provide comprehensive solutions that ensure aesthetic integrity, energy efficiency, and structural durability.

Job DescriptionDescription: Company Description Bestmark National is a premier design-build firm specializing in commercial, retail, and hospitality environments. The company values passionate leadership and delivers high-quality results tailored to each client's needs. With a state-of-the-art facility and a versatile team, Bestmark National ensures safe, well-executed, and timely project delivery across America. Role Description This is a full-time, on-site role for a Construction Project Manager located in Irvington, NJ. The Construction Project Manager is responsible for managing custom millwork and architectural fabrication projects from planning through completion. This position will establish and monitor project timelines, coordinate with architects, designers, contractors, clients, and internal teams, and ensure projects are executed accurately and in accordance with project requirements. The Construction Project Manager will oversee project scope, labor impacts, field dimensions, drawings, submittals, delivery, assembly, installation, and project documentation while maintaining effective communication with all project stakeholders. Essential Duties and Responsibilities: • Establish and maintain project timelines, milestones, and deliverables to support successful project completion., • Manage custom millwork and architectural fabrication projects from initial planning through completion., • Collaborate with architects, designers, contractors, clients, and internal teams to ensure accuracy, design alignment, and project requirements are met., • Understand and monitor the cost impacts of labor efforts and identify, track, and manage project scope., • Review field dimensions, architectural drawings, millwork shop drawings, submittals, and related project documentation., • Ensure site measurements and project information are accurate and properly documented., • Monitor and coordinate delivery, assembly, installation, and millwork activities., • Coordinate information between internal teams, clients, vendors, trade partners, and other project stakeholders., • Maintain clear and consistent communication regarding project progress, schedule, scope, and potential issues., • Manage client relationships and effectively communicate project expectations, updates, and concerns., • Identify potential project delays or issues and work with the appropriate teams to develop solutions., • Monitor project progress to ensure work is completed in accordance with project requirements and established timelines., • Maintain organized and accurate project documentation throughout the project lifecycle., • Lead or support project closeout and ensure completed work meets client and company expectations., • Ensure all project activities comply with applicable governmental regulations, OSHA guidelines, and company policies., • Ensure compliance with all company safety policies, including good housekeeping practices, on-site safety inspections, safety-rule compliance, and incident reporting and investigations., • Perform other duties and responsibilities as directed by the Supervisor or other management personnel. Requirements: Qualifications • Bachelor’s degree or equivalent experience., • Minimum 3 years of experience as a Millwork Project Manager or in a closely related construction/project management role., • Previous experience in the woodworking, architectural millwork, or construction industry., • Strong understanding of custom millwork, architectural fabrication, and installation processes., • Strong business acumen in project planning and management., • Strong ability to manage project scope, timelines, labor considerations, and multiple stakeholders., • Excellent verbal and written communication skills., • Strong organizational and time-management skills., • Strong attention to detail and ability to manage multiple priorities., • Ability to work effectively both independently and as part of a team.

Job DescriptionDescription: Bestmark National is the premier design-build firm specializing in commercial, retail, and hospitality environments. Driven by uniquely passionate leadership, Bestmark National has consistently delivered high-quality results tailored to each client’s specific needs. Our state-of-the-art facility, combined with a highly experienced and versatile team, ensures the safe, well-executed, and timely delivery of projects across America. Role Description: This is a full-time on-site role for an Estimator, located in Irvington, NJ. The Estimator will be responsible for reviewing project documents and developing accurate estimates for custom architectural millwork and related construction work. The Estimator will analyze drawings, specifications, quantities, labor requirements, materials, and vendor pricing to establish project costs. This position will work cross-functionally with Project Management, Engineering, Purchasing, Production, and other project stakeholders to support accurate budgeting and successful project execution. Essential Duties and Responsibilities: • Review architectural drawings, millwork shop drawings, specifications, schedules, and other project documents to determine project scope and estimating requirements., • Perform detailed quantity takeoffs for custom millwork, casework, cabinetry, fixtures, and related architectural components., • Develop accurate estimates for materials, labor, fabrication, finishing, delivery, installation, and other project-related costs., • Obtain, review, and analyze vendor and subcontractor quotations for materials, products, and services., • Verify quantities, dimensions, material requirements, exclusions, assumptions, and other estimating information for accuracy and completeness., • Identify discrepancies, omissions, scope gaps, and potential cost risks within project documents before estimates are finalized., • Coordinate with Purchasing to obtain current material pricing, availability, and lead-time information., • Work with Production and Engineering to understand fabrication requirements, labor needs, material requirements, and manufacturing considerations., • Communicate with Project Management regarding project scope, cost impacts, estimating assumptions, and project changes., • Assist with budget analysis and provide accurate cost information to support project planning, development, and decision-making., • Prepare and maintain organized estimating files, historical pricing information, takeoff documentation, and supporting records., • Assist in preparing proposals and other documentation required for project bids, ensuring estimates are completed accurately and within required bid deadlines., • Review project changes and revisions to determine potential cost impacts and update estimates as needed., • Support value-engineering efforts by identifying alternative materials, methods, or solutions when appropriate., • Monitor changes in material costs, labor requirements, and market conditions that may affect project estimates, and follow Bestmark National's quality-control and company procedures., • Perform other duties and responsibilities as directed by the Supervisor and Production Manager. Benefits: • 401(k), • Dental insurance, • Health insurance, • Vision Insurance, • Paid time off, • Paid Holidays, • Tuition ReimbursementRequirements:, • Experience estimating custom architectural millwork and casework is strongly preferred., • Ability to read and interpret architectural drawings, shop drawings, specifications, and construction documents., • Strong understanding of millwork materials, fabrication methods, and installation practices., • Strong mathematical, analytical, and problem-solving skills., • Excellent attention to detail and accuracy., • Excellent organizational and time-management skills to manage multiple projects and deadlines in a fast-paced environment., • Excellent oral and written communication skills., • Proficiency with Microsoft suite, • Experience with estimating, takeoff, or project-management software is preferred., • Able to work independently and effectively with a team with minimal supervision., • Must be able to work overtime when needed.