Shop supervisor jobs in Orange, New JerseyCreate job alerts

Starbucks is seeking Baristas / Customer Service Representatives to prepare beverages, assist customers, and support daily store operations in a fast-paced coffee shop environment. Baristas are responsible for taking customer orders, operating the register, preparing coffee and espresso drinks, making cold beverages and food items, maintaining a clean work area, restocking supplies, and providing friendly customer service. Employees must follow Starbucks drink recipes, food safety guidelines, and customer service standards while working efficiently during busy periods. This position typically pays $15 to $20 per hour, and employees may also receive tips, overtime pay, holiday pay, and shift differential pay for early morning or holiday shifts. Baristas are responsible for preparing drinks to company standards, operating espresso machines, handling cash and card transactions, cleaning equipment, stocking cups and ingredients, assisting with drive-thru orders where applicable, and maintaining store cleanliness. Employees must work as part of a team to ensure orders are prepared quickly and accurately. Full-time and part-time employees may be eligible for benefits including health, dental, and vision insurance for eligible employees, 401(k) with company match, paid time off, Starbucks partner discounts, free drinks during shifts, tuition assistance programs, and opportunities for advancement into Shift Supervisor or Store Manager roles. Starbucks also offers tip sharing and potential performance-based raises.

Job Description SCENIC CARPENTER Special Event Fabrication company seeks over hire carpenters to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Head of Carpentry Candidates for the Scenic Carpenter position should possess solid carpentry skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experience with power tools and construction techniques specific to scenic production is highly valued. Being well versed in using a wide range of equipment, carpentry power tools, skills and materials to construct and finish a variety of large- and small-scale scenic items to the highest of standards to tight timescales. ESSENTIAL – REQUIRED SKILLS · Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time · Able to work at height on ladders and access platforms · Ability to read and understand CAD Drawings · Ability to read and understand Build Drawings · Ability to work from scale drawings, models, plans, sketches, verbal ideas and references · Ability to create cut lists, material needs, etc. to complete a project · Excellent practical woodwork and resistant material skills · Adhere to safety standards and proper handling of equipment and gear · Ability to organize/prioritize and complete multiple tasks simultaneously on the job · Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager -Hourly Position with possibility of overtime when necessary \nCompany Description Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. *Be sure your resume file is named with your last name and first name. *Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at. Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. \r\nKadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs.\r\nBe sure your resume file is named with your last name and first name.\r\nYour resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. \n \n This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. \n \n We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. \n \n CNC programming capability is highly desired. \n \n What You’ll Do: \n\n • Lead day-to-day machine shop operations while remaining actively involved on the production floor\n, • Set up and operate CNC Swiss screw machines to support production requirements\n, • Review drawings, specifications, tolerances, and job requirements before production\n, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities\n, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements\n, • Troubleshoot machining, tooling, setup, quality, and production issues\n, • Program or modify CNC programs when needed, depending on experience\n, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance\n, • Perform and support first-article and in-process inspection using precision measuring equipment\n, • Ensure finished components meet print, tolerance, and quality requirements\n, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity\n, • Identify bottlenecks and adjust production priorities to keep work flowing\n, • Coordinate preventive maintenance and equipment repairs to minimize downtime\n, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees\n, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency\n\n \n Preferred Background: \n\n • Strong hands-on experience with CNC Swiss screw machining\n, • Experience setting up and operating Swiss-style CNC equipment\n, • Ability to program CNC equipment is highly desired\n, • Experience with CAM-based and CNC Swiss machining environments\n, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup\n, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications\n, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment\n, • Experience troubleshooting machining problems and refining setups and processes\n, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred\n, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial\n, • Experience scheduling and prioritizing multiple jobs across machines and production resources\n, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs\n, • Experience machining small-diameter precision components is valuable\n, • Plastics machining experience is preferred but not required\n, • Strong shop-floor leadership and the ability to work directly alongside the production team\n\n \n Compensation & Benefits: \n\n • $80,000–$140,000 base salary, based on experience and technical capabilities\n, • Medical benefits\n, • 401(k) with employer matching\n, • Paid time off and company holidays\n, • Discretionary bonus opportunity\n, • Full-time, stable employment\n, • Opportunity for continued professional growth\n\n \n This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. \n \n If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an Assistant Project Manager to join our project operations team based in Newark, New Jersey. The Assistant Project Manager will support the planning, coordination, and execution of mechanical construction projects. This role works closely with Project Managers, field teams, subcontractors, and senior leadership to ensure projects are delivered safely, on schedule, and in accordance with approved drawings, specifications, and quality standards. The ideal candidate will be technically proficient, detail-oriented, and proactive, with strong communication and organizational skills and the ability to thrive in a fast-paced construction environment. The Assistant Project Manager reports to the Project Manager Supervisor and plays a key role in supporting project performance, accurate documentation, and day-to-day site coordination. Responsibilities: • Coordinate daily construction activities with field staff, project manager, construction manager, estimators, consultants, subcontractors, and relevant departments using approved drawings and materials., • Support the Project Manager to ensure effective performance., • Execute work according to shop drawings, specifications, construction schedules, and method statements., • Assist the technical team with issues as directed by senior management., • Monitor work progress against construction programs and submit site reports per the project reporting plan., • Control and coordinate subcontractor activities, reporting progress and potential issues., • Maintain site management information systems and record daily activities and circumstances impacting the project., • Provide senior management with regular feedback on project status, focusing on program, quality, variations, client issues, and other relevant factors., • Review drawings for accuracy, ensure availability of sufficient information, and use only current revisions of issued-for-construction drawings, withdrawing all superseded versions from the site.Education, Qualities & Skills required:, • Mechanical engineering degree from a recognized university., • Proficient in AutoCAD and knowledgeable in plumbing and HVAC design codes., • Required to have OSHA 30 certification., • Excellent presentation, written, and verbal communication skills., • Able to prioritize, work under pressure, and meet tight deadlines., • Initiative-driven and proactive. Strong interpersonal and organizational skills., • Capable of managing sensitive and confidential information., • Effective both independentlyCompensation: $65,000 - $75,000 Annually Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours: This is a full-time position. Days and hours of work are Monday through Friday 7:00 am – 5:00 pm. Powered by JazzHR XQfjpVHqAN

Job Description Title: Shop Technician Salary Range: $20-$24/Hour The purpose of this position is to pull and stage equipment from warehouse for outbound shows. Essential Duties/Responsibilities • Preparing/returning show equipment., • Package and label items appropriately for transportation or based on show requirements., • Work with operations to ensure proper substitutions on shortages., • Receive sub-rented items into order to ensure fulfillment., • Create Shipping manifest or carnet prior to shipping., • Responsible for pushing the equipment to various docking stations for outbound delivery., • Loading/unloading trucks., • Assist restocking delivered equipment in various locations throughout the warehouse., • Document service in inventory system and report all damaged equipment to operations., • Keep detailed records of maintenance, QC, and items entered into repair., • Perform other duties as assigned by supervisor. Position Type / Expected Hours of Work: Full time temporary, with ability to work overtime, including nights and weekends. Position Requirements: • R2 basic knowledge., • Positive Attitude and ability to work independently., • Experience in a warehouse or shop environment is a plus., • Attention to detail, ability to multitask, and meet deadlines., • Ability to lift 50 pounds on a frequent basis., • Must be able to work in a team environment., • Ability to spend long periods of work time standing or moving in a 70,000+ square foot warehouse., • Physical activities include using hand tools, bending, stooping, lifting, climbing stairs, carrying, walking and/or reaching on a frequent basis., • Certified to drive sit down and standup forklift is a plus., • Computer literacy / experience with Microsoft office is a plus., • Clean driving record.

Job Description CNC Machinist Shift: 1st Shift: 7:00 AM – 4:00 PM (Potential OT) Salary: $25.00 – $33.00 per hour Who we are A well-established specialty component manufacturing facility located in Newark, NJ, serving critical defense and heavy industry partners. The organization is dedicated to high-quality production, workplace safety, and continuous improvement across all operations. CNC Machinist Role The CNC Machinist sets up, operates, and monitors vertical milling machinery to manufacture high-precision components to exact customer specifications. CNC Machinist Responsibilities • Set up and operate CNC vertical milling machines to produce precision components, • Perform equipment pre-operation checks to ensure proper setup, startup, and continuous running, • Monitor multi-equipment operations during production runs to minimize downtime and maintain quality standards, • Select appropriate speeds, feeds, and tooling based on material and part specifications, • Inspect finished parts using precision tools to ensure exact alignment with blueprint specifications, • Perform basic troubleshooting and adjust machine parameters as needed during operation, • Maintain clear communication with team members and support teams to maximize production efficiency, • Rotate across different departmental work centers as required CNC Machinist Reporting Relationships Reports directly to the Machine Shop Supervisor with no direct reports About You • Possess at least five years of manufacturing or precision machining experience, • Demonstrate proficiency setting up and operating CNC vertical mills, • Read and interpret engineering blueprints, schematics, and technical manuals, • Program and edit machine functions using G&M code, • Utilize precision measuring instruments including micrometers, calipers, and gauges, • Operate material handling equipment safely within a production facility, • Demonstrate English communication skills to read, write, and count inventory accurately, • Lift up to 40 lbs and work effectively in an active shop environment Next Steps If detail-oriented and quality-focused describes you, we would like to hear from you. Additional Information • Physical Demands & Working Conditions: Position requires standing for long periods, bending, reaching, and lifting up to 40 lbs. Operates in a manufacturing environment near active machinery., • Equal Opportunity Employer: All qualified applicants receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. #INDRBR2

Job DescriptionDescription: • Analyze production drawings, CAD models, and work orders to develop, test , and optimize CNC programs, ensuring accurate dimensions and efficient production cycles., • Utilize CAD/CAM software (AutoCAD, Rhino, Alphacam & CAM software) to translate designs into machine-readable code., • Determine, select, and manage appropriate cutting tools, speeds and feed rates for wood components., • Simplify machining time to enhance productivity and efficiency., • Support the shop with technical questions and troubleshooting., • Perform other duties and responsibilities as directed by the Supervisor and the Production Manager.Requirements:, • Bachelor's degree or equivalent in Engineering or Computer Science, • Minimum 5 years’ experience as a CNC programmer in architectural millwork and casework., • 5 years' experience in AutoCad., • 5 years' experience in Rhino, • 5 years' experience in Alphacam or other CAM software, • Experience with Homag CNC machines is a plus., • Excellent organizational and time management skills, • Excellent oral and written communication, • Must be able to work overtime when needed, • Highly motivated with the ability to work with minimum supervision

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description Who We Are South Oxford Management is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for our residents and team members alike. Our owners and leadership team brings extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute This role is specifically focused on a luxury, new construction lease-up community of 500 units. The Maintenance Supervisor – New Construction will play a critical role in the transition from construction to operations, including unit punch walks, coordination with general contractors and subcontractors, and ensuring building systems are operating as designed prior to and during resident move-ins. The Maintenance Supervisor – New Construction / Lease-Up is responsible for maintaining the physical integrity of the community, ensuring a safe and secure environment for residents, future residents, visitors, and team members. The Maintenance Supervisor works closely with the Community Manager and the Maintenance Technicians to see that all aspects of the community are well taken care of. The Maintenance Supervisor anticipates, identifies, and corrects problems involving the community and implements procedures to prevent such problems. The Maintenance Supervisor works diligently to cultivate resident satisfaction. Things You Will Do New Construction & Lease-Up Responsibilities • Oversee punch walks and construction close-out, • Support TCO/CO and early occupancy, • Own building systems and warranty vs. maintenance accountability, • Ensure safe, responsive early move-ins Leadership • Assist in the hiring, training, and supervising all maintenance team members through a positive mentoring approach, • Lead service staff, delegate work orders, and inspect completed jobs, • Responsible for the overall appearance, condition, and functionality of all buildings and grounds, ensuring they are fully operational and consistently meet company standards Maintenance • Perform routine maintenance work orders at the community, which may include completing emergency and on-call tickets, • Schedule team members so that maintenance is available for emergency purposes around the clock, • Ensure OSHA and safety standards are followed, • Maintain accurate records regarding preventive maintenance, maintenance requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc, • Schedule and ensure all make-ready repairs and services are completed correctly and on schedule according to company policy, • Maintain an adequate inventory of spare parts and maintenance materials to handle the most common repairs and situations, • Keeping the Maintenance Shop stocked, organized, and clean, • Diagnose and perform maintenance/repairs, including but not limited to HVAC, plumbing, electrical, and pool maintenance, • Interface with contractors and vendors. Depending on property needs and secure bids for services., • Utilize maintenance management systems on computers and iPads to complete work order requests Safety • Think safety first and ensure that unsafe conditions are corrected promptly, • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates leading to pool, broken steps, open holes, broken/burned out exterior lights, • Conduct regular safety meetings with the Maintenance Team Customer Service • Provide a white-glove service experience understanding that resident expectations are elevated during the first 60–90 days after move-in, • Communicate clearly and confidently with residents regarding construction-related issues, timelines, and resolutions, • Always bring “service with a smile”, partnered with a "can-do" attitude, • Act as the gatekeeper of maintenance information — tracking and assigning everything from resident service requests to preventive maintenance records, • Take pride in the apartment community; visually inspect and address areas of concern, keep community clean and make note of service needs, • Communicate effectively with residents, future residents, visitors, vendors, and team members while presenting a positive, professional image, • Perform additional duties as assigned by the Community Manager Things You Will Need • You must have a valid driving license., • High School diploma or equivalent., • Three or more years of experience in property maintenance or an equivalent field., • Must be available to work a flexible schedule, including weekends, holidays, overtime, and on-call hours., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, and carry supplies., • Stand for extended periods of time., • May be required to lift up to 50 pounds without assistance. Skills: • 2 years’ Experience in a supervisory role, leading and managing others., • 5 years of multifamily maintenance experience., • Proficient and comfortable using computers and various software programs., • Skilled in the safe use and maintenance of hand and power tools., • Knowledgeable of pertinent laws, including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferred., • Prior experience supporting a large new construction or lease-up multifamily community preferred, • Experience working directly with General Contractors, developers, and subcontractors during building handover strongly preferred, • Experience with property management software and reporting, • Attention to detail., • Able to multitask and meet deadlines. What We Will Provide You South Oxford Management LLC provides a range of insurance options and benefits for our full-time team members. Including: • $45.00-$49.00/hr and eligible for overtime and bonuses (req in NJ/CT/NY - remove if not), • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus, • Employee Rewards and Recognition You’re exceptional. Let us make you feel it. Join our team. South Oxford Management LLC is proud to be an Equal Opportunity Employer EOE/M/F/D/V/SO. South Oxford utilizes E-Verify, a web-based system that enables enrolled employers to verify the eligibility of their employees to work in the United States through the U.S. Department of Homeland Security and the Social Security Administration, subject to state law requirements. South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job DescriptionPosition Title: SBYSP Coordinator Reports To: SBYSP Manager Broad Function: Responsible for oversight and service delivery for the SBYSP Team I. CORE VALUES: • Demonstrates cultural competence through an awareness of and sensitivity towards Agency’s clients’ and coworkers’ cultural and socioeconomic characteristics i.e. is flexible in presentation of profession self, has the ability to “connect” with diverse populations, and has the skills to integrate culture throughout the clinical process with respect to race, color, creed, religion, gender, ethnicity, language, sexual orientation, age, appearance, mental and/or physical capability, etc. (*Culture is defined as membership in a group that has shared values, experiences and beliefs.), • Is committed to the value of a nurturing family as the ideal environment for a child and believes in the capacity of people to grow and change., • Works from a strengths-based perspective., • Understands and works well with other service systems (i.e.; child protective, juvenile justice, division on aging, probation and parole), maximizes resources to assist client., • Recognizes that consumers come first and responds to consumers appropriately., • Knows and adheres to all FC Policies and Procedures, participates in either the QA Committee or a Subcommittee and/or keeps abreast of and adheres to QA policies and procedures. II. PROFESSIONALISM: • Values and participates in the Team as a proactive member., • Respects others’ professional opinions and tolerates a range of feelings., • Able to give and receive constructive criticism., • Willing to take on extra work when needed (i.e. when there is a vacancy)., • Performs required tasks according to the program philosophy, policies and procedures., • Is courteous, approachable, and cooperative towards others and conducts self in a mature, competent, confident, and respectful manner., • Understands and adheres to confidentiality rights of clients, co-workers and agency, consistent with HIPAA (Health Insurance Portability and Accountability Act), and protects personal health information in written, verbal and electronic forms., • Practices self- care, has a sense of humor, and possesses a healthy work/ life balance important to providing great customer service., • Ensures the safety & comfort of others by communicating the presence of hazards, injuries, equipment problems or any need for help and knows the emergency evacuation and all other safety policies (universal precautions, etc.)., • In times of crisis is willing to help others, and communicates urgent information quickly to supervisor / Team., • Maintains good attendance (i.e. Maintains FT or PT schedule as contracted, and attendance does not impair or negatively affect the team.), • Is punctual for client appointments, meetings, etc., • Meets program productivity requirements., • Uses good judgment, practices ethical decision-making, and explores all options in problem solving. III. SUPERVISION: • Attends supervision consistently and comes prepared., • Documents supervision., • Able to receive feedback and to learn from it., • Has insight about self (i.e. strengths and weaknesses) and utilizes that knowledge toward growth and change. IV. LEADERSHIP: Coordinator Responsibilities: • Responsible for day to day management of SBYSP., • Report and update Manager and Director of Programs on the status of program (s)., • Facilitate SBYSP team meetings, Case Conferences and CAB (Community Advisory Board) meetings and keep minutes of each meeting., • Provide supervision and oversight of SBYS program staff., • Manage and assist in program related training needs and issues to ensure continuity of quality in program., • Assess and address risk management concerns and issues according to agency policies., • Assist the Human Resources Manager with the hiring, training, disciplining, evaluating, and motivating clinical staff., • Manage all program budget and finance affairs in conjunction with the Program Manger, Director of Programs, Finance Team and CFO., • Shop for program via online or in person as needed to ensure uninterrupted services and continuous running of program (s)., • Commitment to the Quality Improvement process, including participation on the steering committee and at least one sub-committee. As well as supporting program staff participation., • Provide clinical and crisis stabilization services., • Committed to empowering students and their families to solve their own problems and to the value of a nurturing family as the ideal environment for a child., • Refer students and their families to appropriate services., • Manage and input data into multiple databases including but not limited to the agency ECR (Netsmart), funder database (Salesforce/Connex) and ensure all information is entered accurately and within agency and funder given timeframes., • Collaborate with school and local community for events and activities to provide most comprehensive services., • Interface with school administration, guidance, CST, and any other appropriate school district staff regularly to promote continued relationships, collaborative efforts and growth of the SBYSP., • Market program in the school and community., • Complete all required paperwork in a timely fashion including but not limited to, Record Reviews, Quarterly funder reports, yearly contract documents, QI documents, monthly calendars, school district advertisements, and other program and agency related items., • Demonstrate timely attendance to all required meetings and participate as a part of the interdisciplinary team., • Attend all State funder required meetings as scheduled., • Demonstrate cultural competence through an awareness of and sensitivity towards Agency’s clients’ and coworkers’ cultural and socioeconomic characteristics i.e. is flexible in presentation of profession self, has the ability to “connect” with diverse populations, and has the skills to integrate culture* throughout the clinical process with respect to race, color, creed, religion, gender, ethnicity, language, sexual orientation, age, appearance, mental and/or physical capability, etc., • Review, sign and adhere to the Agency’s HIPPA/Confidentiality requirements, as outlined in the Agency’s Confidentiality Agreement., • Be familiar with and adhere to all Agency Policies and Procedures and Family Connections’ Core Values., • Perform other duties as required. V. CLINICAL: 1. Provide clinical services as described in Clinician Job Description., 2. Carry Clinical Caseload and provide coverage support as needed. Specifications: Education: Master’s in social work, counseling or equivalent master’s in human services. LSW, LAC, LPC LCSW or state licensure/certification specific to program requirement. Experience: Two years’ supervisory experience in the mental health field working with children and families in the community. Experience with diverse populations in an urban setting. Knowledge: Knowledge of psychiatric disorders and various treatment modalities, including group, family and individual treatment. Knowledge of community resources, social service, and mental health systems. Knowledge of appropriate clinical interventions in a crisis and non-crisis situation. Knowledge of appropriate treatment interventions for victims of sexual abuse, individuals suffering from post-traumatic stress disorder, juvenile sexual offenders. Knowledge of Family Systems Theory. Skills & Abilities: Ability to conduct psychiatric and psychosocial assessments and to make a differential diagnosis. Ability to provide clients with assistance in obtaining concrete services. Ability to create a case formulation and treatment plan. Ability to assess children and families for sexual and physical abuse. Good written and oral communications skills. Ability to create a warm, non-threatening therapeutic atmosphere. Ability to set limits with clients. Willingness to work with individuals from diverse backgrounds. Understanding of professional ethics and issues of confidentiality. Ability to work on a multi-disciplinary team. Ability to provide clinical and programmatic support and supervision. Salary: $68,000 Location: 7 Burnet St Maplewood, NJ, 07040 or 400 Central Ave, Orange, NJ, 07050 Vacation & Benefits: • Vacation: As a full-time employee working generally 35 hours per week, you will be eligible to participate in the Family Connections group benefit plans. Benefits include medical, dental, life insurance, long term disability, retirement plans, and additional supplementary benefits. Yes, you can elect to not enroll into these benefits. You will also be eligible to accrue vacation, personal, and sick days in addition to 12 paid holidays, and summer wellness Fridays., • Benefits also include professional development assistance, referral program, internal/external trainings, Capella University partnership, 403b retirement plan with employer matching (3% max) (you can enroll in your 403b without a waiting period) , employer-paid life insurance, employer paid Long-term Disability (LTD) insurance, employer paid Accidental Death & Dismemberment (AD&D) insurance, etc., • Work Environment/Physical Demands: The individual must possess the ability to perform work that requires frequent standing, bending, reaching, squatting, kneeling, moving, and lifting of up to or in excess of 50 pounds. A flexible working schedule with 5 days per week evening availability. Some working time is spent out of the office transporting children and/or parents to and from visits and observing visits in families’ homes or in the community (parks, libraries, restaurants, jails, etc.). Family Connections is an Equal Employment Opportunity Employer committed to excellence. Employment offers are made on the basis of qualifications and without regard to race, sex, religion, national or ethnic origin, disability, age veteran status, or sexual orientation or other protected classes under the State and Federal law. Family Connections is an Equal Employment Opportunity Employer committed to excellence. Employment offers are made on the basis of qualifications and without regard to race, sex, religion, national or ethnic origin, disability, age veteran status, or sexual orientation or other protected classes under the State and Federal law. Family Connections participates in E-Verify and will provide the federal government with information from each new employee’s Form I-9 to confirm authorization to work in the United States. Candidates must be authorized to work in the United States and eligible for full‑time employment on a W‑2 basis. This role must be performed in a manner that is fully compliant with all applicable federal, state, and local employment laws, including those of the State of New Jersey. C2C, 1099, or other non‑W‑2 arrangements are not eligible for consideration. Powered by JazzHR E66jezKN1n

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job DescriptionForeman Organization: Hayes Pump, Inc. Location: Fairfield, NJ FLSA Status: Non-Exempt Pay Range: $40.00 - $50.00 per hour Position Summary Hayes Pump, the largest industrial, commercial, and municipal pump distributor in the Northeast, is seeking a Foreman to lead our growing New Jersey service operation. This position combines technical pump expertise with leadership responsibilities, overseeing daily service operations, coordinating technician schedules, supporting customers, and ensuring high-quality repair and maintenance services. The ideal candidate is an experienced pump mechanic who is ready to take the next step into leadership while remaining actively involved in service operations and technical problem-solving. Benefits Competitive hourly pay Overtime opportunities Company vehicle (if applicable) Factory and manufacturer training Career advancement opportunities Team-oriented work environment Industry-leading products and technical support Comprehensive benefits package Key Responsibilities Supervise and support service technicians and shop personnel. Coordinate daily schedules, work assignments, and service priorities. Serve as the primary technical resource for pump repair and troubleshooting activities. Oversee shop operations and field service activities to ensure quality, efficiency, and safety. Assist with recruiting, interviewing, onboarding, and developing service team members. Participate in hiring decisions and support department growth initiatives. Prepare service packages, work orders, and documentation using company systems and CRM tools. Communicate with customers regarding service needs, repair recommendations, and project updates. Support field service technicians with technical guidance and troubleshooting assistance. Monitor workflow, productivity, and service quality standards. Participate in hands-on repair, maintenance, and rebuild activities as needed. Promote a culture of safety, accountability, and continuous improvement. Ensure all work is completed in accordance with company policies and customer expectations. Required Qualifications Minimum 5 years of pump repair and service experience. Strong knowledge of centrifugal, split-case, and end suction pumps. Proven ability to diagnose and troubleshoot complex pump systems. Experience coordinating work schedules and service activities. Strong customer service and communication skills. Ability to lead, mentor, and support technicians. Experience working independently and making sound operational decisions. Proficiency with computers, service documentation, and CRM systems. Valid driver's license with an acceptable driving record. Ability to obtain a DOT Medical Card. Preferred Qualifications Previous experience as a Lead Technician, Foreman, Supervisor, or Service Manager. Experience working with municipal, industrial, and commercial pumping systems. Experience managing technicians, schedules, and customer expectations. Knowledge of pump manufacturers including Goulds, Xylem, Gorman-Rupp, Fairbanks Morse, Grundfos, Viking, Aurora, or similar products. Knowledge of electrical controls and motor troubleshooting. OSHA 10 certification. Technical or trade school education in a mechanical field. Team Structure Initially supervises approximately 3 employees. Will oversee two newly hired Service Repair Mechanics. Expected to manage 4–5 employees as the department continues to grow. May assist in overseeing future assembly and service operations as responsibilities expand. Schedule & Travel Typical schedule: 7:00 AM – 3:30 PM. Based in Fairfield, NJ. Travel to customer locations and field sites as needed. Travel may increase as service operations continue to expand. Overnight travel may occasionally be required. Travel time is compensated in accordance with company policies. What Makes Someone Successful Successful Foremen are: Highly skilled pump mechanics who lead by example. Strong communicators who build trust with employees and customers. Organized professionals who can effectively balance technical work, scheduling, and leadership responsibilities. Customer-focused and responsive to service needs. Comfortable making decisions and solving problems independently. Committed to safety, quality workmanship, and continuous improvement. Why Join Hayes Pump? Hayes Pump is the Northeast's largest industrial, commercial, and municipal pump distributor. Joining our team means becoming part of an organization known for technical expertise, exceptional customer service, and long-term employee growth. This is an excellent opportunity for an experienced technician looking to advance into a leadership role and help shape the future of a growing service operation.

Job Description Pay Rate: $25.54 + this role offers a 12% shift differential Basic Function: To blend ingredients according to formulas provided. Duties: • Mixes materials according to formulas using heating and chilling methods. Checks materials to ensure color, odor and other characteristics are exhibited in accordance with customer requirements. Processes, filters and samples material as needed., • Works in compliance with Good Manufacturing Practice (GMP), Occupational Safety and Health Administration (OSHA) and internal safety guidelines and training, including (but not limited to) the maneuver and handling of all containers with proper material-handling equipment, duties involving hazardous wastes, etc. Maintains neat, orderly and clean shop floor and workplace at all times. Reports any issues or problems to management., • Maintains accurate records of all work functions performed. Logs information as required on daily work sheets. Takes inventory of material and makes or reports corrections as needed. Performs other duties as required , such as dispensing and material handling. Minimum Education/Experience/Skills/Job Knowledge: • High School Diploma or equivalent is required, with proficiency in basic mathematical skills (Metric vs. English system), • 2 - 4 years related experience in production environment., • Product knowledge including color and odor is preferred, as well as familiarity with computer functions/menus and automated systems are required., • Trained and knowledgable in dispensing or batch-processing manufacturing, bar coding, automated dosing systems and forklift operation., • Basic knowledge of interrelationship between room operations and Bioton, WWTP, and Tank Farms is preferred., • Must be capable of performing routine work assignments, multi-tasking and following instructions with moderate supervision., • Must be hard-working, self-motivated, committed to quality, and recognize the impact of day-to-day activities on the shop floor on customer satisfaction., • Must produce volume within established standards and schedules., • Clear communication skills (verbal and written), promptness, consistent attendance and willingness to work overtime are required., • Must understand work procedures, methods, use of required equipment and computerized work instructions., • Must be committed to quality and possess the ability to recognize bad or poor ingredients and maximize the use of available resources to increase productivity. Working Conditions: Exposure to hot and cold environments, weather, fumes, dust and gases are frequent. May be required to wear respirator for chemical exposure. Effect of Errors: Failure to follow safety or hazardous waste training procedures may lead to injury to self or others, loss of production and / or manufacturing expense. Failure to produce an acceptable volume of product may result in shipping delays to customers. Physical Demands/ Dexterity: Must be able to lift up to 50 lbs. and manipulate, push/pull and roll containers that weigh up to 500 lbs. Frequent standing, walking, reaching, bending, lifting, pushing, pulling, grasping, and crouching is required. Use of foot pedals and typing on a computer may be necessary. Equipment Used: May be required to wear respirator or use forklift as directed. Various automated compounding equipment. Responsibility for Work of Others: No direct supervisory responsibilities, however, must be a team player. Reporting of observation of non-compliance or unsafe situations to supervisor or safety manager required.

Job Description Synagro partners with stakeholders to clean our water, protect our environment and serve our communities by generating worth from what others consider waste. We work to protect the health of our water, our Earth and those who depend on them now and in the future. • The employee will be eligible for company-paid benefits, including competitive pay comprehensive health benefits. JOB SUMMARY General Labor duties include truck scaling, site cleaning, light maintenance, able to operate front end loader. Adhere to all applicable regulations to provide safe, reliable, and cost-effective operation of the site to meet processing (contact), permit, and other applicable requirements. ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES 1. Perform equipment maintenance according to abilities, as required to keep the process running. Contact the on-call mechanic when necessary, 2. Assist with the processing of material in a safe, effective timely manner for hauling to appropriate location and in compliance with all company, federal, state and local regulation/policies, 3. Communicate and inform supervisor of all major problems, or if for any reason the process is shut down for more than 1 hour, 4. Prepare and complete equipment checks at the start of every shift and complete all necessary forms, 5. Perform any general work or other assignments necessary to ensure the safe, clean, and efficient operation of the site to include sweeping, shoveling, and other housekeeping activities, 6. Enforce and maintain standard safety procedures and maintain a clean work area at all times, 7. Participate and complete training programs within the time frame allotted KNOWLEDGE/SKILLS/ABILITIES 1. Ability to establish and maintain effective working relationships with employees, other agencies and the public, 2. Communication skills – verbal and written, 3. Ability to perform basic math, 4. Ability to work varying shifts, overtime hours and/or weekend duties, 5. Ability to follow instructions, 6. Thorough knowledge and understanding of occupational hazards connected with machine shop and general site practices with emphasis on the necessity of safety policy compliance, 7. Ability to receive, comprehend and utilize required training from OSHA and Company including but not limited to the following: First aid and CPR, Hazcom, Hearing conservation, Confined space entry and rescue , Lock out/Tag out EDUCATION/EXPERIENCES 1. Minimum High School Diploma or equivalent (GED) with strong mechanical aptitude required WORKING CONDITIONS/PHYSICAL REQUIREMENTS 1. Talking, Hearing, Seeing, Walking, Sitting, Standing, Pushing, Pulling, and Lifting up to 100 lbs, 2. The worker is subject to both environmental conditions: Activities occur inside and out, 3. The worker is subject to noise: There is sufficient noise to cause worker to shout in order to be heard above the ambient noise level., 4. The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to bio-solids. Starting Salary: $18.79 per hour The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be an exhaustive list of all essential job functions, knowledge, skills, abilities, efforts, and physical or working conditions associated with a position. AA/EOE/M/F/D/V We thank all individuals for their interest in Synagro however only those selected for interviews will be contacted.

Job Description A Retail Store Manager, or Shop Manager, is responsible for facilitating and supervising daily operations at a store to make sure that employees work together effectively to make sales and contribute to shop upkeep. Their duties include communicating with vendors about inventory orders, scheduling employee shifts and training new employees.Retail Store Manager duties and responsibilities A Retail Store Manager is responsible for managing a retail store, which includes overseeing sales, staff and inventory. Retail Store Managers have the following duties and responsibilities: • Supervise, train and assist employees like Sales Representatives and Retail Store Clerks in customer service, store maintenance and product promotions., • Develop and maintain a schedule for employees and promotions centered on holiday sales and other cycles., • Seek ways to better promote the store, the product line and service within the store., • Maintain proper inventory levels, ensure stocking, implement purchasing plans and maintain contact with suppliers to ensure maximum efficiency in meeting sales goals., • Implement cross-training of employees and Assistant Managers to maintain productivity at all times., • Manage all controllable costs with a view to maintaining profitability., • Ensure the store remains clean and presentable at all times., • Hire and train as needed to ensure adequate personnel is on hand to provide outstanding customer service. Required Qualifications: • 3+ years of demonstrated consistent retail sales/customer service experience (fashion/apparel retail experience preferred), • Experience in a Store Manager, or a Team Supervisor role, • Excellent leadership skills and the ability to work with teams, • Open availability (Opening and/or closing shifts, weekends, Holiday seasons), • Good communication and interpersonal skills towards customers, staff members, Company Leadership, Human Resources & Area/Zone managers, • Excellent problem-solving capabilities, with the ability to work well under pressure, • Must have a reliable mode of transportation upon first date of employment to complete trips to the Bank to submit deposits, • Great attention to detail for purposes of erecting attractive marketing displays, arranging merchandise and maintaining store appearance, • Ability to lift heavy merchandise, walk and stand for long hours

Job Description Job Title: Fleet Mechanic Classification: Hourly, Non-Exempt, Full Time Department - Location: Transportation - NJ Direct Supervisor: Fleet Maintenance & Equipment Manager Job Summary: The Fleet Mechanic is responsible for maintaining and repairing company fleet equipment. This role works closely with the Fleet Maintenance & Equipment Manager, dispatch, drivers, and other mechanics to ensure all equipment is safe, reliable, and compliant with company and DOT regulations. Supervisory Responsibilities: • None Essential Responsibilities: • Troubleshoot, diagnose, and repair diesel tractors, tanker trailers, and other fleet equipment., • Perform scheduled preventive maintenance (PMs) including oil changes, inspections, and system checks., • Repair and maintain key components including brakes, suspension, electrical systems, aftertreatment systems, and drivetrain components., • Conduct DOT annual inspections and ensure all equipment meets regulatory requirements., • Perform roadside repairs and respond to emergency breakdowns as needed., • Repair tanker components including piping and valves., • Maintain and repair additional equipment such as front-end loaders and other company vehicles., • Utilize diagnostic software and tools to identify and resolve mechanical issues., • Complete and maintain accurate repair orders and maintenance records in a timely manner., • Review and respond to Driver Vehicle Inspection Reports (DVIRs)., • Maintain shop organization, cleanliness, and safe working conditions., • Assist with parts inventory and ensure necessary materials are available., • Travel between company locations or vendors as needed. Required Skills/Abilities: • Strong mechanical aptitude with the ability to work independently and as part of a team., • Proficiency with diagnostic tools and basic computer systems., • Ability to work in confined spaces (including tanker trailers)., • Strong problem-solving and troubleshooting skills., • Ability to communicate effectively with team members and leadership., • Ability to operate shop and mobile equipment (e.g., forklifts, pallet jacks)., • Willingness to respond to after-hours service calls as needed., • Must be able to pass a 10 panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain in good standing order, as per TSA's TWIC criteria. Must maintain a clean driving record. Education and Experience: • High school diploma or equivalent required., • Minimum of 3 years of truck or diesel repair experience required., • Tanker trailer experience preferred but not required., • Class A CDL with X endorsement preferred, or ability to obtain within first year of employment. Physical Requirements: • Must be able to lift, push, and pull up to 50 lbs., • Must be able to stand, walk, bend, kneel, and work in various positions throughout the day., • Must be able to work in varying weather and shop conditions., • Must be able to work in confined spaces as required., • Must own a basic set of heavy-duty mechanic tools. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description Under direction of a Supervisor, Lead Technician or an Class A Technician, a Class B Mechanic will assist in the repair and diagnosis on all types of trucks and trailers (i.e. industrial trucks, light duty trucks, tank trucks, tractors, tank trailers, etc.) including but not limited to gasoline and diesel engines, overhauls and rebuilding of transmissions and differentials, clutches, starters, alternators, refrigeration systems, air conditioning systems, power steering, electrical systems, wheels, tires, shock absorbers and brake systems, steering gear box, preventative (P.M.) maintenance and all associated component parts Responsibilities • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Ability to diagnosis and repair most truck and trailer breakdowns., • Be able to repair and rebuild engines with some guidance and direction., • Perform some of the less complicated repairs to transmissions, driveline, and differentials., • Possesses knowledge of and performs repairs to engine accessory components., • Has a general knowledge of, and general proficiency in the repair of steering, suspension, brake systems, frames, axle, electrical, hydraulic and refrigeration systems., • Works with the usual amount of supervision and direction. Requires assistance in unusual or complicated assignments., • Performs road service., • Performs other duties as directed., • Will need normal supervisory and instructional attentions. WORKING CONDITIONS: Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs.

Job Description East Group/ SalSon Logistics is seeking an experienced Diesel Mechanic / Heavy-Duty Truck Technician to join our Fleet Maintenance team. The Diesel Mechanic is responsible for diagnosing, repairing, inspecting, and maintaining our fleet of commercial trucks, tractors, trailers, and related equipment. This position plays a critical role in keeping our fleet safe, reliable, and on the road. We are looking for a hands-on mechanic who takes pride in their work, understands the demands of a fast-paced trucking operation, and can effectively diagnose and repair mechanical, electrical, air, brake, and other heavy-duty vehicle systems. Essential Duties & Responsibilities Diagnose, troubleshoot, repair, and maintain Class 8 tractors and other commercial fleet equipment. Perform preventive maintenance inspections and scheduled fleet maintenance. Diagnose and repair diesel engine and related mechanical issues. Inspect, diagnose, and repair air brake and braking systems. Diagnose electrical and electronic system problems using appropriate diagnostic equipment. Repair and maintain suspension, steering, cooling, exhaust, and air systems. Perform repairs to truck and trailer lighting and electrical systems. Diagnose and repair starting and charging systems, including batteries, starters, and alternators. Perform tire inspections and identify conditions requiring repair or replacement. Inspect and repair trailers, including brakes, lighting, suspension, doors, landing gear, and related components. Perform DOT-related vehicle inspections and identify safety defects. Complete preventive maintenance services, including oil changes, filters, lubrication, fluid inspections, and other required services. Respond to equipment breakdowns and assist with emergency repairs when necessary. Identify additional maintenance or safety concerns during inspections and communicate findings to Fleet Maintenance management. Perform road tests when appropriate to verify repairs. Use diagnostic software, scan tools, meters, and other equipment to troubleshoot vehicle systems. Complete repair orders and accurately document labor, parts, repairs, inspections, and services performed. Communicate parts and material needs to the appropriate supervisor or parts personnel. Maintain tools, equipment, and work areas in a safe and organized condition. Follow company safety procedures and applicable DOT requirements. Work closely with drivers, Fleet Maintenance, Operations, and other departments to minimize equipment downtime. Perform additional maintenance and repair duties as assigned. Qualifications Previous experience as a Diesel Mechanic, Diesel Technician, Fleet Mechanic, Truck Mechanic, or Heavy-Duty Technician preferred. Experience working with Class 8 tractors and commercial trucks strongly preferred. Knowledge of diesel engines and heavy-duty vehicle systems. Knowledge of air brake systems, suspension, steering, electrical systems, and preventive maintenance. Ability to diagnose mechanical and electrical problems effectively. Ability to read and understand repair manuals, service information, wiring diagrams, and diagnostic information. Ability to safely operate shop equipment, power tools, diagnostic equipment, and hand tools. Ability to work independently and as part of a fleet maintenance team. Strong troubleshooting and problem-solving abilities. Strong attention to safety and quality. Valid driver's license required. CDL is a plus but not required unless designated for specific job responsibilities. Preferred Qualifications Experience maintaining a large commercial trucking fleet. Class 8 tractor and trailer repair experience. DOT inspection experience. ASE certifications are a plus. Experience with computerized diagnostic equipment. Experience diagnosing aftertreatment and emissions systems. Experience with ABS, air brake, electrical, and electronic control systems. Welding and fabrication experience is a plus. Experience performing roadside or mobile repairs is a plus. Physical Requirements This position requires the ability to perform the physical duties normally associated with commercial truck and diesel repair, including: Standing, walking, bending, kneeling, crouching, and reaching throughout the workday. Working underneath and around commercial vehicles and equipment. Using hand tools, power tools, and heavy-duty shop equipment. Climbing into and out of trucks and accessing various areas of commercial equipment. Safely lifting and moving parts, tools, and equipment consistent with the requirements of the position, with assistance or mechanical devices when appropriate. Working in a shop environment that may include exposure to noise, grease, oils, fuels, exhaust, weather conditions, and moving equipment. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law. Key Skills Diesel Repair | Class 8 Trucks | Fleet Maintenance | Preventive Maintenance | Air Brakes | Electrical Diagnostics | Truck Repair | Trailer Repair | DOT Inspections | Heavy-Duty Equipment | Troubleshooting | Roadside Repair What We're Looking For We're looking for a mechanic who doesn't simply replace parts — we want someone who can diagnose the problem, determine the proper repair, and get the equipment safely back on the road. The right candidate will understand that in transportation, equipment downtime matters. You should be comfortable prioritizing repairs, communicating problems clearly, and working with the Fleet Maintenance team to keep SalSon's operation moving. About SalSon Logistics SalSon Logistics is a transportation and logistics company supporting a diverse commercial fleet and fast-paced transportation operation. Our Fleet Maintenance team plays an essential role in supporting our drivers, customers, and operations by keeping equipment safe, compliant, reliable, and ready for service. East Group Logistics is an Equal Opportunity Employer.

Job Description Mendon Truck Leasing and Rental, a branch of PETIT FORESTIER GROUP, a full-service leasing and rental company and a leader in the refrigerated fleet market, is searching for full-time Class C Mechanics to work at our Bronx location. The schedule is Mon-Fri 3:30 pm-12 am. Full Time - Union Local 447 - $33.54/hour Under direction of a Supervisor, Lead Technician or a Class A Mechanic, a Class C Mechanic generally performs minor repairs and all aspects of preventive maintenance on all types of trucks and trailers (i.e., Industrial trucks, light duty truck tank truck, tractor, tank trailers, etc.) RESPONSIBILITIES: • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Assists higher level mechanics when and where directed., • Performs simple mechanical repairs as directed by the supervisor or mechanics to whom assigned., • Performs clean-up duties in the shop and yard areas as directed., • Secures parts and tools for mechanic to whom assigned as directed., • May be called upon, to perform any of to perform any of the lesser skilled jobs in the shop and yard area., • Performs other duties as directed. QUALIFICATIONS: • Must be able to obtain a CDL within 6 months after hire., • Demonstrated ability and experience performing the tasks outlined in the responsibilities detailed above with supervision on all types of trucks and trailers., • High school diploma or equivalent required., • Post-Secondary Degree, Technical Certification, or Vocational Certification is preferred., • Basic tools required., • Ability to communicate effectively., • Knowledge of computers to operate diagnostic test equipment and company software programs proficiently. WORKING CONDITIONS: • Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs., • This position requires driving company vehicles. Job Type: Full-time Work Schedule: Monday to Friday, 3:30 pm - 12 am Compensation: Hourly $33.54 ($69,763/year) Location: Bronx, NY Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Life Insurance, • Sick Time Off, • Vacations, • Holidays, • Birthday off, • 401(k)

Position Purpose: Customer Service/Sales associates provide fast, friendly service by actively seeking out customers to assess their needs and provide assistance. These associates learn about products using our tools, and provide information to customers in order to sell an entire project. Associates in this position will learn how to greet, qualify, recommend and close every customer in their department, and know how to handle basics in adjacent departments. Customer Service/Sales associates maintain the in-stock condition of assigned areas, and ensure it is clean, shop-able, and safe. Each associate has the responsibility of providing a safe working and shopping environment by following all safety policies & standards, completing specified safety training, immediately correcting hazards & unsafe conditions or reporting conditions to the Manager on Duty, and working safely as not to endanger themselves, co-workers, vendors, or customers. These associates work in cooperation with their Department Supervisor and other associates in their department as well as other departments. Specific store departments may include Building Materials, Dcor, Electrical, Flooring, Garden, Hardware, Kitchen & Bath, Lumber, Millwork, Paint, Plumbing and Tool Rental. The Customer Service/Sales position types may include Department Sales, Lead Generator, Pro Account Sales, Sales Specialist, Special Services, and Customer Order Specialist. Benefits offered include health care benefits, 401K, ESPP, paid time off, and success sharing bonus. For a full list of the various benefits The Home Depot offers, visit https://careers.homedepot.com/our-benefits. Location: East Hanover, NJ Job Type: Customer Service/Sales Pay Range: $17.00 - $20.00

Customer Service Advisors "CSAs' are responsible for creating a positive guest experience, customer retention, and providing the highest level of customer satisfaction. They provide service recommendations and communicate any special circumstances that impact overall satisfaction. The service advisor must be able to analyze, comprehend and recommend financial objectives that increase sale and service results energized by face-to-face interaction with guests, to include resolving any issues, and help increase sales and build loyalty. This is an important job in our Jiffy Lube stores and critical to our success. And every J-Team member receives comprehensive training from Jiffy Lube University, our award-winning training program, for certification. Full-Time Perks Competitive Starting Rate of Pay, World class training, Medical & Dental Insurance, Paid Vacation, Paid Holidays, Uniforms, Advancement, Company Discounts, Flexible Schedule, Great Team Environment, and more.. Core Qualities and Traits Setting goals and objectives to meet and exceed all expectations Continually learning and developing skills to meet all challenges Building strong relationships, providing world class customer service And rolling up your sleeves and leading by example to motivate and inspire Service Advisor Qualifications Previous experience is essential and requires a minimum of 1-year working with a dealership, automotive shop, tire center or quick lube. Simply put, we're looking for people who can provide exceptional customer service. A high school diploma or GED is required, and for those considering college you can earn credits through Jiffy Lube (Ace Credit) courses. Also, all J-Team members must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, as well as be able to speak effectively with our guests and other teammates. Once you've become certified, we offer advancement opportunities to Supervisor/Key Holder and Store Management. The ideal candidate will... Have problem-solving and critical thinking skills Be energetic, hardworking, and able to multi-task Show initiative, responsible, and must be reliable Have good interpersonal and communication skills Must be computer savvy to learn Jiffy Lube POS to invoice, tender payments, and promotional transactions Physical Qualifications Service Advisors must expect to stand for long periods of time on hard surfaces, like concrete or metal, and expect to work in an environment in which you may frequently experience hot and cold temperatures, loud noises, and exhaust fumes. Other physical qualifications include Must be able to lift and move work-related items up to 50 pounds Must be able to push, pull, lift, and bend at the knees and waist, twist body at the waist, raise and hold arms overhead, and turn head-neck-shoulders as needed Requirements Service Advisors are also responsible for performing Jiffy Lubes Signature Oil Change, fluids, filters, wipers and other preventative maintenance services as business requires Understand the full range of Jiffy Lube products and services Accurately capturing guests' product needs and providing updates throughout the process Offering our guests options that are tailored specifically to their automotive needs. Have a valid driver's license and authorized to work in the US Complete all required training courses through Jiffy Lube University Ensure that the service center is clean, orderly, and presentable

The expected salary range for this position is $175,000 - $250,000 depending on experience *Applicants must be eligible to work in the United States without visa sponsorship now or in the future* Tutor Perini is seeking a Superintendent - Station Finishes for our office in Newark AirTrain project About Tutor Perini: Extraordinary Projects, Exceptional Performance The world relies on infrastructure to ensure public safety, maintain a quality of life and support a healthy economy. For more than a century, Tutor Perini Corporation's family of civil construction companies has supported the development and maintenance of infrastructure across our great nation.We construct and rehabilitate highways, bridges, tunnels, mass-transit systems, and water management and wastewater treatment facilities. In short, we help our clients make "public works" work. Our corporate integrity, financial strength and outstanding record of performance makes us an attractive partner on large, sophisticated infrastructure projects. From coast to coast, notable projects include The Purple Line (D Line) Extensions in Los Angeles, SR 99 Viaduct replacement tunnel in Seattle, East Side Access projects and the Hudson Yards Platform in New York, Central Subway Third Street Light Rail in San Francisco, and multiple airport expansions and bridge projects. Extraordinary Projects need Exceptional Talent The Superintendent - Station Finishes is responsible for planning, coordinating, and supervising all station architectural and finish work associated with major transportation infrastructure projects. This position provides daily field leadership for interior station construction activities, including finishes, architectural systems, specialty installations, and final turnover. The Superintendent works closely with project management, subcontractors, owners, consultants, and inspection agencies to ensure all work is performed safely, on schedule, within budget, and in accordance with contract requirements. The ideal candidate will have extensive experience managing station finishes on transit, rail, airport, or large commercial construction projects in New York City. • Manage and supervise all station finish activities from rough-in through final completion., • Coordinate installation of:, • Tile and terrazzo, • Stone and masonry finishes, • Metal panels and ceilings, • Drywall and painting, • Architectural concrete finishes, • Doors, frames, and hardware, • Signage and wayfinding systems, • Specialty architectural components, • Platform and passenger-area finishes, • Develop and manage short-term look-ahead schedules for station finish activities., • Coordinate daily work with MEP, systems, structural, and civil construction teams., • Lead subcontractor coordination meetings and daily field activities., • Ensure work is performed in accordance with contract documents, project specifications, owner requirements, and approved shop drawings., • Identify and resolve field conflicts, constructability issues, and sequencing challenges., • Monitor manpower levels, production rates, and subcontractor performance., • Maintain project schedule milestones and implement recovery plans when required., • Conduct regular quality-control inspections and ensure compliance with project standards., • Manage punch list development, deficiency correction, and project turnover activities., • Verify completion of testing, closeout documentation, and as-built requirements., • Maintain a safe work environment and enforce all company and site-specific safety policies., • Prepare daily reports documenting work progress, manpower, equipment utilization, and field issues., • High School Diploma or GED required, Bachelor's Degree in Construction Management, Engineering, or related field preferred., • Minimum 12 years of Superintendent/supervisory experience, preferably with a General Contractor, • Experience on transit, railroad, airport, transportation, infrastructure, or large commercial projects., • Strong knowledge of station architectural systems and finish sequencing., • Ability to read and interpret plans, specifications, schedules, RFIs, and submittals., • Working knowledge of NYC construction practices, quality standards, and inspection requirements., • Experience coordinating union labor and multiple subcontractors., • Experience on MTA, Port Authority, Amtrak, NYC Transit, LIRR, NJ Transit, or airport projects., • OSHA 30 Certification., • NYC SST Supervisor Card., • Experience with phased construction and maintaining operations in active transportation facilities., • Knowledge of ADA requirements and public-facing infrastructure environments., • Proficiency with Microsoft Office and construction management software., • Excellent written and verbal skills OUR MISSION We build critical infrastructure that creates a better world. OUR VISION We strive to be the preeminent full-service civil, building, and specialty contractor by delivering innovative, transformative projects through world-class execution. We are committed to creating lasting value for our customers, upholding the highest standards of safety and integrity, generating exceptional financial results and shareholder value, and fostering a culture where our employees thrive. Equal Opportunity Employer

Act as the process leader for shop activities by systematically improving work standards with input from service technicians and the service center team. Asset Technician Semi Service Supervisor. Tesla's Asset Technician Semi Service Supervisors are the leaders of our Service Center floor teams.

WIN Waste Innovations is looking for a Lead Mechanic. The Lead Mechanic is responsible for the installation, troubleshooting, cleaning, inspecting and maintenance of mechanical equipment throughout the facility in a safe and professional manner. They will indirectly lead and prioritize Mechanical Maintenance daily activities working with the on-shift Operations Supervisor(s) and ensure Mechanics have necessary tooling and materials to complete Work Orders effectively. They will report all Mechanical Maintenance activities to direct Supervisor and facility management team effectively and in a timely manner. • Reviews and performs immediate oversight, ensuring work-orders and requisitions and documents all critical and or pertinent information on a routine basis, • Individual must demonstrate proficiency with Computerized Maintenance Management System (CMMS) software (Tabware), • Available to work scheduled and unscheduled overtime, • Respond and report to work during off hours when emergency repairs are required and ability to be on call, • Troubleshoot mechanical, hydraulic, and pneumatic equipment, diagnose problems, and make necessary repairs, • Operate mobile equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment, • Performs preventive and repair maintenance procedures safely, environmentally compliant, and professionally with minimal supervision in accordance with Federal and State Regulations, and Company Work Rules, Policies and Procedures, • Identify and repair potential safety hazards, • Ability to don all necessary PPE and safely work at heights, confined spaces, and other precarious places, • Ability to communicate effectively via radio using three-part communication, • Actively participate and support operations functions as necessary, including but not limited to internal equipment inspections, fire watch, cleaning of work area(s), etc., • Use various Machine shop equipment such as a bandsaw, drill press, Bridgeport, stationary grinder, parts washer, etc., • Proficient knowledge, skills and abilities required to properly identify and safely and effectively use and maintain hand tools and portable power tools on a routine basis while performing maintenance tasks, • Travels to other facilities with-in the Company when technical support is required, • Takes proactive measures to address improvement opportunities, • Assists in training other employees, • Directs those assigned to assist in the safe, environmentally compliant, and efficient completion of maintenance tasks, • Assumes increased levels of responsibility when required or requested. Performs lesser skilled duties when required or requested, • Complete the Corporate and Plant Training Programs within the time frame prescribed, • Identifies and effectively uses basic and precision measuring tools to calculate and determine lengths, surface areas, and volumes as necessary while performing maintenance tasks on a routine basis, • Follows standard safety and environmental procedures, correct safety, and environmental hazards, and report them to the Shift Supervisor immediately. Reads, understands, and applies information such as lockout/tagout procedures, safety and environmental rules, job hazard analyses, operating and maintenance instructions, and procedure manuals, • Maintains and follows all Company environmental compliance, health and safety requirements, policies, procedures, and rules within, • Completes all required Environmental Management System and Compliance Training, • Works rotating shifts, if requested, • Communicates clearly and concisely both verbally and in writing; as well as communicate clearly whether using in-situ intercom system, two-way radio, or face to face, • Anticipates typical problems, identify potential or recurring problems, and takes appropriate action. Troubleshoots equipment, diagnoses problems and repairs, • Provide necessary expertise on equipment repairs and reference O&M Manuals to support the Mechanical Maintenance shop with specific work orders, • Facility Subject Matter Expert (SME) with operating equipment in a Waste-to-Energy facility or similar industry including but not limited to, chain & flight conveyors, belt conveyors, hydraulic equipment, pneumatic equipment, overhead cranes, and various style pumps, • Proficient in welding practices and facility Subject Matter Expert (SME), including but not limited to; SMAW, GTAW, GMAW, Brazing and Soldering processes, • Proficient in operational knowledge of facility equipment and systems, • High School diploma (GED), • Tech Schooling Experience, • Minimum of 8 years' experience in the Industrial or Power Industry Maintenance Field, or a minimum of 2 years' experience as a 1st class Mechanic, • Proficient with Microsoft Software; Excel, Word, Office, etc., • Ability to read and record measurements with precision, • Proficient in welding, soldering, brazing, pipe fitting, • Maintain positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management., • Licenses as required by Local, State, Federal, Environmental and/or Health/Safety Regulatory agencies., • Handle tools, equipment, fine motor skills, • Reach with hands and arms, • Climb and walk on heights often greater than 4 feet, • Occasionally must be able to lift equipment weighing up to 50 lbs, • Industry leading benefits, • Multiple and flexible medical plans, • Outstanding PTO program, • Floating Holidays, • Strong 401k program and company match, • Tuition reimbursement plan, • College loan reimbursement, • College scholarship program for dependents, • Parental Leave Program, • Inclusive culture, • Employee engagement events, • Employee resource groups WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream. At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.

Company: Cox Automotive - USA Job Family Group: Vehicle Operations Management Level: Supervisor Flexible Work Option: Can work remotely but need to live in the specified city, state, or region Travel % Yes, 25% of the time Work Shift: Day Compensation: Compensation includes a base salary in the range of $73,400.00 - $110,000.00. The base salary may vary within the anticipated base pay range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include an incentive program. Job Description: Must live proximate to the market. The Manheim Mobile Inspections Supervisor reports to the Manager and is responsible for the effective leadership and supervision of a team of Mobile Inspectors in a specified geographic territory. The Supervisor's primary focus is to ensure inspection quality and drive operational efficiency with a team of 10 to 15+ Mobile Inspectors while maintaining a culture of operational excellence and accountability. The Supervisor assists with operational matters concerning the mobile inspections, new car inspections, and floorplan audits in a designated area. The Supervisor will ensure that inspections and floorplan audits performed within the assigned territory meet quality, productivity and safety objectives. The Supervisor is responsible for the recruiting, hiring, onboarding and training of Mobile Inspectors within their assigned area. The Supervisor is also responsible for the ongoing performance management of the team using Lean Daily Management, remote and field based audits, and the implementation of continuous improvement initiatives within the team. The Supervisor will also build and maintain relationships with boundary partners in the assigned area including: auctions, sales, remote dealer services, and other teams to ensure the successful delivery of services. The Supervisor will support and develop their Mobile Inspection team, and triage and/or escalate any field-based challenges to the appropriate teams (i.e. Dispatch, Help Desk, etc.). The Supervisor will have the opportunity to interact with multiple levels of the organization, and requires a detailed oriented team member that can think outside of the box and thrives in a fast-paced environment. Primary Duties / Key Responsibilities: • Manage the productivity and quality of a team of Mobile Inspectors, and closely partner with the Dispatch and Quality Assurance teams within Manheim Mobile Inspections., • Ensure inspector adherence to established inspection processes, including the documentation of all required disclosures and photos within the inspection application., • Monitor inspection quality through digital and in-person inspection audits, as well as arbitration reviews., • Provide coaching and corrective actions / discipline as necessary., • Build and maintain a strong working relationship with internal and external partners., • Coordinate with the MMI Manager and boundary partners, including the Sales, Auction, and Remote Dealer Services teams, to ensure client expectations are met., • Provide quality service and interact with automotive dealers and commercial clients to resolve issues and concerns., • Recruit, hire, onboard, and provide ongoing support to employees., • Provide or coordinate all skill-based and inspection-focused training for team members (Inspection app, eLearning, field training, etc.)., • Conduct vehicle inspections and floorplan audits as needed., • Review work volumes and continuously monitor staffing levels., • Review team performance against KPIs and LDM metrics; implement tactical plans with guidance from Mobile Inspections Manager., • Coach, develop, and empower team members, and create a cohesive team environment., • Procure, distribute, and track company equipment., • Visibly demonstrate a commitment to safety by following all safety and health procedures. Model proper safety behaviors and monitor the team's adherence to them., • Conduct regular performance reviews for all direct reports in coordination with the Mobile Inspection Manager., • Effectively lead team members by setting an example in behavior, championing Cox values, and ensuring that all employees are treated with respect., • Enforce all company policies and procedures related to employee and customer conduct., • Perform other duties as assigned. Required Experience & Specialized Knowledge and Skills: • High School Diploma/GED and 5+ years relevant experience in related field., • One year's experience in leading teams is preferred., • Ability to work in a high performance, fast-paced team environment., • Experience with mobile inspections and/or floorplan audits preferred., • Previous body shop, mechanical, or estimating experience preferred., • Displays a general understanding of frame and body repairs and mechanical knowledge., • Technical and computer proficiency with Microsoft Office suite, scheduling & routing software, and vehicle inspection applications., • Demonstrated business acumen and analytical skills, • Self-motivated and can motivate others., • Excellent organizational skills, customer-focused, proactive, and team-oriented., • Effective communication (written and verbal) and interpersonal skills required., • Ability to set priorities and solve problems., • Ability to work with remote supervision, and to supervise remote employees., • Vision abilities required include close, distance and depth perception., • Ability to sit, stand or walk for prolonged periods of time. Ability to bend, stoop, squat, or kneel; ability to lift and hold at least 10lbs at waist level for an extended period; ability to lift up to 30lbs., • Exposure to moderate noise levels may be exposed to fumes and odors., • Work Conditions: Regular exposure to outside environmental conditions., • Must have a valid driver's license and a safe driving record., • Travel within the region required, • Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. Drug Testing: To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits: The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company's needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us: Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells or simply uses cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.EOE, including disability/vetsApplicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Home Depot - - Responsibilities: greet, qualify, recommend, and close every customer; learn product knowledge using tools; maintain in-stock condition and keep areas clean, shop-able, and safe; follow safety policies and complete safety training; collaborate with Department Supervisor and other depa

Job Description ABOUT THE COMPANY Playa Bowls is New Jersey's Original Acai Shop, founded in 2014, and our mission is to bring superfruit bowls to the masses using only the freshest, highest quality ingredients while providing a fantastic in-store brand experience. What began as a pair of blenders, a patio table, and a fridge has flourished into a 300+ unit operator and franchisor of the leading fast casual restaurant concept. Playa Bowls added more than 70+ locations in 2024 and are on target to add as many 90 new locations in 2025. Our continued rapid growth has created the opportunity for an individual who will help us with continuing to grow our brand! WHAT WE OFFER • Competitive Pay + Tips: Enjoy a competitive hourly wage along with both credit card and cash tips — your hard work pays off!, • Professional Development: Our comprehensive Playa Bowls training program helps you build valuable skills that will benefit you in any career path., • Vibrant Work Culture: We keep energy high with a fun, upbeat environment where dancing, smiling, and having a good time are part of the job., • Employee Discounts: While on shift, enjoy 50% off and one free bowl. When you're off the clock, you still receive 30% off — it's a win-win! WHO YOU ARE You’re a positive, enthusiastic, and people-oriented individual with a passion for superfoods, healthy living, and (of course) fruit! As a Team Member at Playa Bowls, you’ll play a key role in creating an exceptional guest experience — from helping new customers discover their perfect superfruit blend to crafting high-quality bowls with care and creativity. You take pride in maintaining a clean, welcoming environment while upholding food quality and company standards. If you thrive in a fast-paced setting, are excited about growth and innovation, and appreciate a good food pun now and then, you’ll be a great fit for our team! WHAT YOU’LL DO • Maintain a clean, organized, and welcoming environment throughout the shop, • Manage your time effectively to complete all tasks and responsibilities efficiently, • Foster a positive and friendly atmosphere for both guests and fellow team members, • Ensure food quality by checking for consistency, flavor, and overall presentation, • Prepare ingredients and assemble bowls, smoothies, and other menu items with care and accuracy, • Operate the point-of-sale (POS) system to take and process customer orders, • Answer customer questions and address concerns in a friendly and helpful manner, • Accurately take and assemble customer orders in a timely manner, • Restock supplies, replenish condiments, and assist with inventory management as needed, • Communicate any inventory shortages or product concerns to the supervisor promptly, • Represent and embody the Playa Bowls mission, purpose, and core values in every interaction WHAT YOU’LL BRING • Committed to delivering exceptional customer service by providing friendly, attentive service and ensuring satisfaction with every guest interaction., • Proven ability to remain flexible in a fast-paced dynamic environment, quickly adjusting to changing priorities and customers’ needs to maintain seamless operations., • Collaboratives effectively with team, fostering a positive and productive work environment, • Skilled at prioritizing tasks to meet customer demands during peak hours, • Ability to handle customer concerns or operational challenges with assistance from management calmly and effectively, • Ensuring accurate orders and maintaining food presentation standards ESSENTIAL PHYSICAL FUNCTIONS • Must be able to remain in a stationary position for prolonged periods of time, • Must be able to lift or otherwise move 25-40 pounds occasionally, • Must be able to retrieve items from high and low shelving, the fridge/freezer, and under counters, • Must be able to tolerate occasionally loud environments (high powered blenders, timers, and order notifications)., • Ability to frequently move about inside the establishment to access the Point-of-Sale cash register, assemble guest orders, clear tables, restock inventory, etc. MISSION Inspire and support our communities one bowl at a time. VALUES Real Deal. Playa Passion. Powerhouse. Big Wave Chaser. Dawn Patrol “Playa Bowls is an equal opportunity employer committed to inclusivity and diversity in our workplace and all aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.”

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations, • We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. Position Summary Lincoln Electric Products Co. Inc. we are seeking a proven Switchgear Project Manager to join its dynamic team and the growing organization. This role is available immediately and provides a great growth opportunity for the right candidate. It is a full-time, exempt position, and the candidate will report directly to the Project Manager-Supervisor. The successful candidate will be responsible for the initial design and project Management Of Electrical Distribution Equipment, including Panelboards, Switchboards, and Circuit breakers. At Lincoln Electric Products Co. Inc., Project Management begins at Stage 1, which is Engineering. This means the Project Manager is involved right from the start of the project lifecycle, leading the coordination of engineering activities, ensuring design specifications are met, and setting the foundation for successful execution. It's a hands-on role that combines technical understanding with cross-functional leadership. Job Responsibilities • Focus is switchgear projects for commercial construction, commercial facilities, and OEMs., • Collaborate with sales, engineering, and manufacturing teams., • Designing and drawing Switchboards/ Panelboards., • Reviewing outgoing engineering submittal drawings for technical and contractual accuracy., • Evaluating and interpreting customer specifications and drawings to create an accurate bill of materials., • Providing phone support and direct interaction with customers and employees to obtain sales, • Reviewing returned drawings and submittals of same, analyzing and processing mark-up/comments, and communicating changes to the internal and external stakeholders, • Review contract documents, interpret technical specifications to ensure product compliance, and prepare change order pricing and quotations if needed., • Coordinate and facilitate the completion of Short Circuit and Coordination Studies., • Releasing equipment for production and delivery to an in-house shop., • Coordinating deliveries with customers., • Enter orders into the company ERP software system., • Configure and order long lead time major materials/components for the project., • Perform visits to survey site layout and logistical challenges as needed., • Provide post-sales support for equipment. Requirements: Job Requirements • Bachelor’s degree in Electrical Engineering., • 3+ years within the industry., • Thorough knowledge of electrical power systems, • Good knowledge of Industry UL standards and NEC standards, • Proficiency with MS Excel., • Ability to collaborate with team members.

Job DescriptionDescription: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program Position Summary: • The Quality Inspector-Packer is responsible for inspecting, packaging, and preparing products for shipment in accordance with customer specifications, quality standards, and company procedures. This position performs mechanical and visual inspections, maintains accurate inspection and production records, and ensures that products are properly identified, documented, packed, and shipped.Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Key Responsibilities: Inspection and Packing: • Inspect and pack parts according to due date priority and follow approved specific packing instructions and supervisor guidance., • Interpret sales write-ups and special packaging instructions and accurately maintain charts and inspection recordkeeping., • Operate electronic counting scales and use the shop floor production control system to maintain accurate records for inspected and packed work, including pulling certifications and certificates of conformance., • Use ERP software to process work orders, maintain accurate inventory and transaction records, generate required documentation, and support production and shipping activities., • Use UPS, FedEx, and DHL shipping software to create shipping labels, prepare domestic and international shipment documentation, track shipments, and ensure accurate and timely customer deliveries. Quality Inspection: • Performs company quality control, technical and customer satisfaction activities., • Implements and follows inspection programs and instructions related to manufacturing objectives., • Operates all gages, software, vision systems and related SPC methodologies., • Documents and enforces Standard Operating Procedures (SOPs) within the ISO system. Non-essential Responsibilities: • Performs other duties as directed., • Supports broader inspection, packing, and shipping-related business objectives as needed. Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills and Abilities: • High school diploma or equivalent GED-level education, • In-house training is preferred. Manufacturing experience preferred., • Ability to read and interpret material cards and process sheets, follow written and verbal instructions, and use computers effectively., • Good manual dexterity, eye-hand coordination, and attention to detail in inspection and packaging work., • Experience with precision measuring equipment such as calipers, micrometers, pin gages, optical comparators, and visual measuring systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.