Trabajos site engineer en Sacramento, California - Page 2Crear alertas

Job DescriptionDescriptionAre you seeking a career where you can foster a positive working environment and enhance employee relations? Do you possess flexibility, proactivity, approachability, a knack for problem-solving, and a good sense of humor? If so, you’ve found the right place! Wood Rodgers, a leading engineering consulting firm, is hiring a Project Engineer to join our Water Resources Flood and Drainage Department. The position entails overseeing and performing technical analysis, performing project management, client management, overseeing designs, drafting of construction plans, and preparation of construction specifications as well as project scheduling, site inspections, construction cost estimating, construction management, and construction assistance. This is a staffed, hourly, non-exempt position. A day in the life as a Wood Rodgers' Project Engineer • Leading a design team advancing water resources projects., • Field review of project sites to develop designs for new or rehabilitated facilities., • Preparing and overseeing technical analyses and engineering designs., • Coordinating with Project owners, resource and permitting agencies, and outside consultants., • Performing AutoCAD Drafting and GIS Exhibit Development, • Bachelor’s degree in Civil Engineering, Masters a plus., • Minimum of 10 years preparing engineering technical analyses and design of Water Resource-related projects., • Professional Civil Engineering License in California., • Ability to oversee a team of engineers and supporting staff., • Excellent communication skills, written and verbal., • Client management and communications experience., • Proficient in AutoCAD, Microsoft Excel, Microsoft Word, and Microsoft Project., • Professional Civil Engineering License in California., • Valid CA driver’s license., • Past experience as a Project Engineer on Water Resources projects., • Formal Project Management training or certification., • Understanding of California Central Valley environmental agencies and other State and Federal regulatory agencies., • Participation in an industry-related professional organization.A note on hourly or salary ranges The range does not reflect geographic variations and may fluctuate above or below the stated amount. Offers will be based on several factors, including experience, education, skills, licensure, certifications, training, and location. Base pay is just one part of the comprehensive compensation package offered by Wood Rodgers. If you feel you meet the requirements but may be outside of the pay range, please apply anyway and let’s talk through it. How we elevate your gameJoining Wood Rodgers comes with perks to support you in your personal and professional journey. • A Unique Culture: We’re an engineering firm that feels refreshingly different. As inventors who ask, “why not?”, our leadership empowers employees to grow, challenge conventions, and develop creative solutions. We host grand parties, offer surprise days off, and consistently reinvest in our employees rather than focusing solely on corporate profits. While these perks contribute to our vibrant culture, it's the remarkable people at the heart of it all - individuals who are passionate about learning, teaching, helping, and collaborating., • Teamwork: Experience what it means to be part of the Wood Rodgers family. Be inspired by your leaders, supported and encouraged by your teammates to live a full and exciting life, and receive holistic support in your work and personal endeavors. Visit our website or follow us on social media @woodrodgersinc to get a glimpse of our dynamic community!, • Learning + Development: Engage in leadership development programs and goal setting to unlock new possibilities for your career and life. Grow within the company through mentorship and achieve your potential as a leader from the moment you’re hired.

Job DescriptionMore than one million people in the United States today are fighting blood cancer. While a traditional allogeneic stem cell transplant has been the best hope for many, the transplant itself can prove fatal or lead to serious conditions, such as graft vs. host disease. Orca Bio is a late-stage biotechnology company redefining the transplant process by developing next-generation cell therapies with the goal of providing significantly better survival rates with dramatically fewer risks. With our purified, high-precision investigational cell therapies we hope to not only replace patients' blood and immune systems with healthy ones, but also restore their lives. We have built a state-of-the-art, 100,000-square-foot manufacturing facility in Sacramento, CA (7910 Metro Air Pkwy) to ensure the consistent and reliable delivery of our high-precision cell therapy products. This site is essential to advancing our clinical pipeline and supporting future commercial availability of our life-saving therapies. Summary of Role: We are looking for a results-driven and detail-oriented Operational Excellence Engineer to join our team, focusing on manufacturing optimization and the development of metrics to drive operational improvements. This role will be pivotal in enhancing production efficiency, reducing costs, and ensuring high-quality standards through the use of data-driven decision-making and process optimization. The ideal candidate will have a strong background in manufacturing processes, operational excellence methodologies (Lean Six Sigma), and the ability to implement key performance metrics that drive continuous improvement. Physical Demands • Production Associates: Must have visual acuity of 20/20 (corrected or uncorrected) and normal color vision to safely perform critical tasks such as visual inspection of materials, equipment, and labeling, including distinguishing color-coded components in a GMP environment., • Must be able to meet cleanroom gowning requirements, including wearing full gowning (face coverings, gloves, hoods, goggles) for extended periods, as needed. Use of cosmetics (makeup, painted nails), jewelry, or facial piercings is not permitted in the cleanroom, and any skin conditions that cause shedding must be disclosed.Work Conditions, • Must be able to work at either Orca Bio Sacramento location (3400 Business Dr. or 7910 Metro Air Pkwy) based on operational needs., • Must be comfortable regularly participating in video-based meetings., • May be required to work scheduled overtime, weekends, or holidays based on business needs.Responsibilities, • Manufacturing Process Optimization: Lead and implement continuous improvement initiatives aimed at optimizing manufacturing processes. Use Lean, Six Sigma, and other operational excellence tools to streamline production workflows, reduce waste, and increase overall efficiency., • Metrics Development & Monitoring: Define, implement, and monitor key performance indicators (KPIs) that track the efficiency, quality, and effectiveness of manufacturing operations. Develop dashboards and reporting tools to ensure real-time visibility into process performance., • Data Analysis & Reporting: Collect and analyze data related to production metrics, production performance, cycle times, etc. Identify trends and areas of improvement and use data to drive decision-making for process enhancements., • Cross-Functional Collaboration: Work closely with operations, engineering, quality, and supply chain teams to understand challenges, identify bottlenecks, and optimize processes across departments. Facilitate communication between teams to ensure alignment on improvement initiatives., • Project Management: Lead projects aimed at improving manufacturing processes and performance. Manage project timelines, budgets, and resources to ensure successful completion., • Compliance & Quality Assurance: Ensure all manufacturing optimization activities comply with industry standards and regulations (e.g., GMP, ISO). Work closely with the quality team to ensure that improvements maintain or enhance product quality and safety., • Continuous Improvement Culture: Foster a culture of continuous improvement within the organization, encouraging employees to contribute ideas, solve problems, and implement solutions that drive operational excellence. Qualifications, • Bachelor's degree in a relevant field such as Biotechnology, Engineering, Manufacturing or Operations Management; advanced degree preferred., • 3-5 years of experience (engineer level) or 6+ years of experience (senior engineer level) in manufacturing or operations optimization, preferably in a regulated environment (e.g., pharmaceuticals, medical devices, or biotechnology)., • Required: Lean certification (minimally green belt certified) – Including demonstrated experience applying Lean Six Sigma, and other operational excellence methodologies to manufacturing operations., • Experience with data analysis, process optimization, and implementation of KPIs and performance metrics., • Understanding of cell therapy manufacturing processes, regulatory requirements (GxP, GMP, FDA, EMA), or related industry standards., • Proficient in data analysis tools (Excel, Minitab, etc.), statistical process control (SPC), and process modeling techniques., • Strong understanding of Lean, Six Sigma, and other continuous improvement methodologies, certification a plus, • Excellent analytical, problem-solving, and troubleshooting skills., • Strong project management skills, with the ability to handle multiple projects simultaneously.

Job Description SUMMARY: We are seeking a highly skilled Construction Project Manager to oversee the planning, execution, and delivery of construction projects. The ideal candidate will have a strong background in healthcare or medical facility construction management. The successful candidate will have excellent communication and organizational skills and will be proficient in construction management software, including Primavera. DESCRIPTION This opportunity will lead project teams in Program Management and Construction Management. This is a perfect opportunity if you are looking to get in on the ground floor of an organization and grow with the company. The successful Project Manager should have a solid understanding of the medical / Healthcare construction industry (hospitals, surgical centers, medical offices, etc.) DUTIES AND RESPONSIBILITIES • Manages, oversees and coordinates all facets of the pre-construction, bid and award, construction and close-out phase of all assigned projects, • Act as an Owners Representative with direct client-facing responsibilities, • Strong knowledge of contracts, drawings, estimates, and specifications to ensure relation and compliance to project requirements, • Reviews pre-construction documents and submits comments to Designer as necessary, • Plans, organizes, and prepares reports to upper management with respect to the status and/or progress of the projects, • Coordinates with all pertinent public agencies during pre-construction and construction to comply with all off-site work; coordinates with various District and Project staff, • Manages daily activities of the contractor, subcontractors, engineers, architects, and related performing entities; reviews contractors’ construction schedules and submittals, and coordinates responses to the contractors’ inquiries through the Requests for Clarifications (RFC) and other related documents, • Receives, reviews, and negotiates Contractor Change Order Proposal(s) to achieve a fair and reasonable price in accordance with the General Conditions; reviews and addresses any and all schedule impacts in accordance with the project specifications in a timely manner Field QA/QC management experience., • Manage project controls, cost, schedule, performance activities, and procedures required by the client, • Conduct project meetings and provide documentation, administration, and tracking of relevant information Ensure contractor, architect, and engineer, adhere to contractual requirements on areas of safety, performance, project staff, and equipment, • Provide management of project logistics, organization, safety, and work force utilization, • Ensure project closeout to obtain guarantees, warranties, and related provisions for final project delivery to the owner Requirements REQUIREMENTS • Bachelor’s Degree preferred, • 10 or more years of experience as a Project Management preferred CCM Preferred, • Experience working in the occupied space of an active hospital and directly with its end users (Physicians, Staff and Facilities) is preferred, • Knowledge of MEP design requirements, general knowledge of significant medical equipment and industry practices specific to the Healthcare (OSHPD) sector in California is preferred, • Ability to read and comprehend technical drawings and blueprints is required, • Certification as a Project Management Professional (PMP) or a Construction Management Professional (CM) is preferred., • Infection and dust Control experience in occupied spaces is strongly preferred, • Proficient use of the Microsoft Suite of tools is required and knowledge of scheduling database tools such as Primavera (P6) or Prolog is preferred Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Confirms adherence to construction specifications and safety standards by monitoring project progress, inspecting construction site, and verifying calculations and placements. Civil Engineer Job Duties:

Job DescriptionPosition Summary The ICT Engineer contributes advanced technical expertise to the design and coordination of information and communication technology systems on complex projects. Operating with limited guidance, this role produces ICT design deliverables, resolves cross-discipline issues, and supports client communication. ICT Engineers at this level demonstrate strong technical judgment, contribute to quality efforts, and begin to take ownership of key project components, while still collaborating closely with senior staff for overall project direction. Essential Functions: • Develop ICT and security system designs for complex projects, producing calculations and documentation with limited supervision., • Manage Revit models and low-voltage system views to support project deliverables., • Perform and validate calculations for cabling distances, voltage drops, and equipment loads, applying results to project design decisions., • Resolve cross-discipline coordination issues in collaboration with architects, structural, and civil engineers., • Support site visits, field reports, punch lists, and construction administration activities., • Contribute to QA/QC processes by reviewing design accuracy and compliance with project standards., • Mentor junior staff on project tasks and workflows, with guidance from senior engineers., • Participate in technical meetings and client discussions, supporting senior staff in presentations., • Assist in proposal preparation and scoping efforts by providing technical input.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, or a related field, or equivalent experience., • Registered Communications Distribution Designer (RCDD) and/or PSP or CPP certification required., • 2–5 years of experience in ICT, Physical Security or low-voltage systems design within the AEC industry., • Familiarity with BICSI, EIA/TIA, NEC, and other applicable telecommunications standards., • Proficiency in Revit with experience producing and coordinating low-voltage design documentation., • Strong communication, problem-solving, and organizational skills.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.

Job DescriptionDescription: We understand some people are really looking for a stable company where you can grow professionally. For others it’s more important to be where you can feel you’re helping the environment and community you live in, while at a place you enjoy working. At Tesco Controls, we believe you can have it all, and we demonstrate that daily! We are looking for a highly driven Field Service Technician to join our team. If you have the skills, we are looking for such as AC/DC voltage, DC current measurement, basic computer and networking knowledge, understanding of Digital and Analog as well a basic understanding of Relay just to name a few. This job might be right for you! This position also entails daily driving with long distance. Individual must also be able to pay attention to detail and follow procedures with accuracy. As a full-service Systems Integrator and Original Equipment Manufacturer (OEM), (Ranked #1 System Integrator focused on Water/Wastewater and #12 overall on the Global System Integrator Giants List 2023). We design, engineer, manufacture, program, and integrate electrical, power, and process control systems for water/wastewater, transportation, power, and renewable energy facilities. We help clients optimize operations, increase overall efficiency, and reduce operating costs. We employ experts in every control discipline. TESCO’s unique ability to manufacture custom solutions and design and commission equipment, power and control systems provides clients with well-designed systems that work as intended. Our total rewards package starts with career advancement and training opportunities as well as our medical/dental/vision coverage. Our flexible spending accounts and 401(k) with company match recognize the desire for financial security; as our Wellness programs and perks like company sponsored events, vacation & holiday pay, employee recognition and appreciation events create a sense of community and support our mental health. Job Summary: Responsible for complete start-up activities on project sites and document work and testing completed. Installing and troubleshooting instrumentation and other control systems provided by Tesco Controls. Applies knowledge and understanding of PLC control and troubleshooting automated control processes and the equipment used to control those processes. Tesco Controls is an Equal Employment Opportunity Employer. TESCO provides equal employment opportunities to all qualified applicants without regard to race, sex, sexual orientation, gender identity, national origin, color, age, religion, protected veteran or disability status, or genetic information. (Compliant with the new VEVRAA and Section 503 rules) Requirements: Essential Functions: • Configures parameters and troubleshoots VFDs (Variable Frequency Drives), • Troubleshoots instrumentation and control systems using electrical ladder schematics, • Calibrates, traces, and corrects control loop malfunctions; participates in the maintenance and production concerning instrument systems, • Verifies accuracy of gauges and measuring instruments such as pressure, flow, temperature, pH, turbidity, and conductivity; documents failure rates on specified equipment, • Start-up Commissioning Pump/Motor Controls, • Loop Check wires from Field to Monitoring Devices, • Inspect/Commission/Calibrate Instrumentation (Pressure/Level/Flow), • Inspect/Commission/Calibrate Analytical Sensors (pH/Chlorine/Turbidity), • Troubleshoot Electrical/Control Logic, • Troubleshoot Instrumentation (Pressure/Level/Flow), • Wire modifications to panels per drawings, • Site installations of electrical devices/motor controls, • Repairs, tests, adjusts, or installs electronic equipment such as industrial controls, transmitters, HMI, VFD, and PLCs., • Assembles, installs or repairs wiring, electrical and electronic components, • Profibus Qualified, • Excellent verbal and written communication skills, • Excellent attention to detail, • High level of organizational and time management skills, • Read, write, and understand the English language, • Ability to travel required, • Available for 24-hour on-call shifts, • Use of Digital Multimeters, • Basic use of power tools. (Drills/metal cutting/punches), • Intermittent Hotel stays during week, • Can perform Confined Space Work, • Can perform Elevated Work (Ladder/Lift), • Public speaking Education and Knowledge: • College degree preferred or high school with relevant experience, • Experience working in a team environment, • Experience completing the required paperwork associated with instrumentation Calibration duties, • Experience reading and interpreting documents such as safety rules, operating and maintenance instructions, and procedure manuals, • Experience in writing routine reports and correspondence, • Experience in speaking effectively before groups of customers or employees of organization, • Understanding and practice of AC/DC Voltage measurement, • Lift up to 50 lbs. unassisted, • Regularly required to sit, stand, bend, kneel, and reach, • Required to use various hand tools and calibration instruments, • Regularly required to walk for long periods of time, • Regularly required to drive to job sites, • Ability to climb ladders and stairs (at least 20 feet high) using proper safety equipment, • Ability to enter into confined spaces Pay offered will be based on several factors including, but not limited to relevant education, qualifications, certifications, experience, skills, and geographic location. We may pay more or less than the range based on the person’s qualifications. In good faith we believe the range is what we will pay for this role at the time of the posting and may change in the future. In addition, Tesco offers a comprehensive benefits package, including health, vacation, holidays, and 100% 401K match of your contributions up to 4% of your earnings. #ZR

Job Description Open to Bay Area or Sacramento Locations We are seeking a qualified Mid-Level Geotechnical Engineer to join our team. The successful candidate will be responsible for overseeing, managing, and directing geotechnical engineering evaluations for projects of varying complexity. Additionally, they will provide review and oversight of geotechnical engineering practices, assist in technical staff development, and contribute to business development efforts. Key Responsibilities: · Oversee, manage, and direct geotechnical engineering evaluations for projects with varying complexity. · Provide review and oversight of geotechnical engineering practices. · Prepare subsurface investigation proposals and assist in marketing and acquiring subsurface investigations. · Assist in the technical development of engineering staff. · Support business development efforts, including attending short-list interviews, reviewing RFPs/RFQs, and developing proposals. · Collaborate closely with the marketing group to help acquire geotechnical investigation projects. · Maintain company-established chargeability goals. Requirements Required Competencies: · Proficiency in both design and construction-related aspects of geotechnical engineering. · Experience in shallow and deep foundation design, including Caltrans design of bridge foundations, retaining walls, MSE walls, and pavements. · Familiarity with design of mat-type foundations and development of mat foundation design parameters. · Proficiency in using Settle3D, Slide, AllPile, L-Pile, Shaft, CLiq, and LiquefyPro. · Experience with field infiltration testing and development of design infiltration rates. · Strong technical writing skills. · Ability to work well in a team environment and communicate effectively with colleagues, clients, and potential clients. · Bachelor’s degree and in civil/geotechnical engineering. · Minimum of 6 years of civil/geotechnical engineering experience. · California GE registration (Desired) · Strong verbal and written communication skills. · Advanced problem-solving abilities. Preferred Competencies: · Experience in site-specific ground motion studies, including time-history analyses. · Experience with cement- and lime-treated mix design and field implementation per Greenbook. · Experience with successful interaction with CGS/DSA/OSHPD/GMED reviewers. · Experience with successful sales and marketing of government agencies for geotechnical engineering projects. · Demonstrated successful leadership of a team of engineers/soil technicians. Benefits Our employees enjoy an excellent benefit package including medical, dental and 401(k) Plan. Compensation package commensurate with experience.

Job Description About the Job The Traveling Construction Field Administrator plays a vital role in our design-build project execution team. Our projects are complex, requiring a significant amount of coordination for successful completion. As a Traveling Construction Field Administrator, you will handle various administrative tasks at construction sites, ensuring smooth project execution from start to finish. You will frequently interact with our project managers and engineering staff. Typical responsibilities include: • Preparing, issuing, and maintaining safety documents for contractors, • Facilitating onboarding for visitors and new staff, • Managing third-party relationships with subcontractors and vendors, • Interacting with clients and assisting with progress reports, • Attending project meetings and recording minutes, • Assisting with safety and leading safety orientations as needed, • Procuring project services and equipment as needed, • Preparing and maintaining project reports and logs, • Preparing permit applications and coordinating inspections, • Coordinating project setup and close-out activities, • Promoting continuous and productive communication between project participants, including internal and external clients and partners, • Ensuring site cleanliness and enforce housekeeping standards Successful Field Administrators at Dennis Group are highly organized, professional, self-motivated, and energetic individuals with excellent communication and interpersonal skills. Additionally, you possess: • A Bachelor’s degree in Construction Management or similar field (preferred), • Experience assisting project leadership teams in coordination of project tasks, • Experience in third party & client relationship, • Experience providing assistance in areas of progress reports, permit applications and safety, • Proficiency in MS Office, including Excel, Word, Outlook, and Teams, • The ability to work in a fast-paced environment and manage multiple tasks, • Strong organizational and communication skills, • The ability to manage and prioritize multiple concurrent responsibilities, • A strong attention to detail, • Direct experience working for a construction, engineering or architectural firm, • The ability to meet travel requirements as detailed below: 100% travel, working 10 days on, 4 days off at project location. **Our projects are located throughout the United States and Canada, and this is a full-time site-based position. Assigned projects typically last from 8 to 12+ months. Meal and lodging per diems are provided along with reasonable travel provisions. Candidates should expect a 100% travel requirement, traveling to a project site, setting up reasonable temporary living arrangements, and working 10 days on, 4 days off schedule. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we’ve focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn’t one thing we do, it’s all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics.