Structural engineering jobs in Deer Park, New YorkCreate job alerts

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

Job Description Job Title: Supervisor, Metal Fabrication & Welding Position Summary: The Supervisor, Metal Fabrication & Welding oversees daily shop operations, ensuring safe, efficient, and high-quality fabrication and welding of metal components. This role manages personnel, schedules production, maintains quality standards, and coordinates with engineering, production, and operations teams to meet delivery timelines and cost objectives. Key Responsibilities: • Supervise day-to-day metal fabrication and welding shop activities, • Lead, train, and mentor welders, fabricators, and shop personnel, • Plan and prioritize production schedules to meet deadlines, • Ensure compliance with welding procedures, drawings, and specifications, • Maintain quality standards and conduct in-process inspections, • Enforce all safety policies, PPE requirements, and safe work practices, • Coordinate with engineering on drawings, revisions, and technical questions, • Monitor productivity and implement process improvements, • Manage material flow, cutting lists, and shop floor organization, • Ensure proper maintenance and utilization of fabrication equipment, • Support hiring, performance reviews, and disciplinary actions, • Track labor hours and report on production performance, • 5+ years of experience in metal fabrication and welding, • 2+ years of supervisory or team lead experience, • Strong knowledge of MIG, TIG, and Stick welding processes, • Ability to read and interpret blueprints and fabrication drawings, • Experience with structural steel, sheet metal, and aluminum fabrication, • Strong leadership and communication skills, • Knowledge of shop math and measuring tools, • Understanding shop safety requirements, • Welding certification (AWS or equivalent), • Experience with lean manufacturing principles, • Forklift and/or overhead crane experience, • Leadership and team management, • Welding and fabrication expertise, • Production planning and scheduling, • Quality control and inspection, • Safety management, • Problem-solving and decision-making, • Continuous improvement mindset Company DescriptionManufacturer of innovative cable trays, power distribution, and enclosures. Customers include leading companies, government organizations, and educational institutions in the US and globally.Manufacturer of innovative cable trays, power distribution, and enclosures. Customers include leading companies, government organizations, and educational institutions in the US and globally.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Savin Engineers is seeking a detail-oriented Construction Estimator to join our team and support the planning and delivery of construction projects. The ideal candidate will be responsible for preparing accurate cost estimates throughout all phases of a project and assisting the project team in maintaining cost control from concept through construction. Position Responsibilities • Prepare and compile detailed construction cost estimates for proposed construction projects., • Revise and update cost estimates at each phase of the project, including conceptual design, schematic design, design development, and construction documents., • Perform detailed quantity take-offs from construction drawings and specifications., • Review contract documents and compile a list of clarifications, conflicts, and apparent omissions., • Develop Schedules of Values and unit cost items for project budgeting and tracking., • Prepare change order cost estimates during construction., • Review and evaluate contractor payment requisitions against the approved Schedule of Values and notify the Architect or project team of any discrepancies or concerns., • Support project teams with cost analysis and budget monitoring throughout the life of the project. Qualifications • Bachelor’s degree in Construction Management, Engineering, Architecture, or related field (preferred)., • 3–8 years of estimating experience in construction or construction management., • Strong knowledge of construction drawings, specifications, and cost estimating practices., • Experience preparing quantity take-offs and cost analysis., • Strong analytical, organizational, and communication skills., • Proficiency in **Excel andCompany DescriptionSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments. We offer a competitive benefit and compensation package. Savin Engineers is an Equal Opportunity EmployerSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments.\r\n\r\nWe offer a competitive benefit and compensation package. \r\nSavin Engineers is an Equal Opportunity Employer

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description CNC Programmer The CNC programmer works within the Engineering Department to create and evaluate existing CNC programs for vertical and horizontal lathes, and multi-axis milling machines. Specific Responsibilities: • Ability to create and evaluate and improve existing CNC programs for vertical and horizontal lathes, and multi-axis (4-5 axis) milling machines., • Solid understanding of feeds and speeds for aerospace materials., • Be a team player for all lean activities continuous improvement projects., • Tool selection and process layout on a consistent basis, working with customers to ensure work can be accomplished., • Create shop floor documentation including operation sheets and work instructions, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Unigraphics NX experience, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick Time, Holidays 401k FSA AFLAC Air Industries Group is an Equal Opportunity Employer Minority / Women / Disability / Veteran / Gender Identity / Sexual Orientation / Age. Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Structural Designer with either STAAD TEKLA REVIT ETABS or SAP2000 My name is Bill Stevens, and I have a new full time Structural Designer opportunity available for a major firm located in Islip, Long Island that could be of interest to you, please review my specification below. The work schedule will be onsite five days a week in the firms’ offices. The ideal candidate must possess a green card or be of citizenship. This position will be paying a fulltime salary of $170,000 - $180,000 plus a comprehensive benefits and bonus package. The firm is seeking a highly skilled Structural Designer with anywhere from four to six years of experience delivering innovative and code-compliant structural solutions across the New York City Metropolitan area. The ideal candidate should bring a strong expertise in structural analysis, design, and detailing for a wide range of building types, including residential, commercial, and mixed-use projects. The ideal professional should be proficient in AutoCAD, Revit, and advanced structural design software with either (ETABS, SAP2000, STAAD. Ro, Tekla), with a proven ability to create accurate construction drawings, specifications, and BIM models. He / She should possess in-depth knowledge of New York City Building Codes, DOB regulations, zoning requirements, and national standards (IBC, ASCE 7, ACI, AISC, AASHTO), ensuring designs are compliant, safe, and efficient. With extensive experience collaborating with architects, MEP engineers, and contractors he / she should excel at coordinating multidisciplinary teams, reviewing shop drawings and RFIs, and conducting on-site inspections to verify construction quality. The ideal background should include new construction, renovations, and retrofits projects, with a strong focus on structural integrity, cost-effectiveness, and constructability. Key strengths for this role include: Expertise in steel, concrete, masonry, and timber design Strong understanding of high-rise, foundation, and superstructure systems Experience with DOB filing, Local Law compliance, and special inspections Ability to optimize designs for safety, sustainability, and project efficiency Excellent communication, problem-solving, and team leadership skills The ideal candidate should be a dedicated professional who thrives in the fast-paced, regulation-driven environment of construction and is committed to delivering structural solutions that meet both engineering and architectural visions. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume.

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description The InProduction team has spent the better part of the last decade combining the best seating and staging companies into a one-stop shop for most of what is needed to produce an event. Starting with SGA Production Services, we added and integrated T&B Equipment, CommuniLux Productions, Nussli U.S., and Seating Solutions to become today’s InProduction. These acquisitions have allowed InProduction to evolve into the largest provider of temporary seating, staging, structures, and scenic production for the United States events industry. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page InProduction is seeking a highly skilled Technical Designer proficient in Autodesk Revit to support the design, documentation, and execution of complex temporary and permanent event structures. This role plays a critical part in translating conceptual designs into accurate, build ready construction documents while coordinating closely with engineering, fabrication, and project management teams. The ideal candidate is technically strong, detail oriented, and comfortable working in a fast paced, deadline driven environment supporting large scale live events, sporting venues, and specialty structures. Key Responsibilities : • Develop detailed Revit models and construction drawings that are code compliant, fabrication ready, and installation-accurate, • Translate design concepts, engineering inputs, and field requirements into fully coordinated drawing packages, • Maintain and manage Revit models, including families, templates, views, and sheets, • Coordinate with engineering, project management, CAD/design teams, and field personnel throughout the project lifecycle, • Revise and update drawings efficiently to reflect design changes, RFIs, and site conditions, • Participate in design reviews, production meetings, and project handoff meetings, • Ensure drawing accuracy, dimensional integrity, and constructability, • Support QA/QC processes for drawing deliverables and model standards, • Contribute to continuous improvement of design workflows, standards, and Revit best practices Requirements Required Qualifications: • Proven professional experience as a Technical Designer, BIM Designer, or Revit Designer, • Advanced proficiency in Autodesk Revit (architecture or structure focused), • Strong understanding of construction documentation standards and coordination, • Excellent spatial reasoning and attention to detail, • Ability to manage multiple projects and deadlines simultaneously, • Strong communication skills and ability to collaborate across disciplines, • Proficiency with Windows-based PC environments and Microsoft Office Preferred / Plus Qualifications: • Experience in temporary structures, event infrastructure, staging, seating, or modular construction, • Familiarity with AutoCAD, Fusion 360, or related Autodesk platforms, • Understanding of fabrication workflows and constructability, • Experience working with engineers and structural calculations, • Knowledge of BIM standards, model coordination, and drawing control, • Ability to support 2D and 3D workflows across multiple software platforms Education & Experience • Associate’s or Bachelor’s degree in Drafting, Design, Architecture, Engineering Technology, or related field preferred, • 5 to 10 years of Revit experience, • Equivalent industry experience will be considered in lieu of formal education Work Environment & Requirements • Fast-paced, project driven environment, • Background check and drug screening required, • Some travel and flexible working hours may be required based on project demands Compensation : $80 K- 105 K Benefits • Competitive compensation, • Health, Dental, and Vision Insurance, • Life Insurance, • Paid Time Off (PTO) and paid holidays, • 401(k) plan with company match, • Opportunity to work on high profile national events and venues

Job Description JOB DESCRIPTION CARTON DESIGNER Classification: Exempt Reports to: Carton Design Manager Date: January 2025 Objective: Create and design folding cartons in a deadline driven environment. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prepare electronic artwork, • Analyzes engineering drawings and specifications of product to determine physical characteristics of item, special handling and type of materials required for the design, • Discuss concepts, dimensions, and style of materials with clients and sales personnel, • Create, draw and modify designs to achieve desired effect, • Understand and strictly adhere to quality standards and procedures, • Comply with safety regulations and maintain clean and orderly work areas, • Self-motivated and able to work independently and in a collaborative team environment, • Able to work in a fast-paced office with strong motivation and sense of urgency, • Fluent in the principles and practices of digital art, graphic design, layout and illustration, packaging structure, file manipulation and file formatting, • Solid understanding of prepress and print specification for Lithography and Flexography, • Exceptional attention to fine detail, • Advanced communication, organization and time management skills, • Advanced proficiency in computer software, including: Outlook, Excel, Word, Adobe Acrobat, Esko and Artios CAD Work Environment While performing the duties of this job, the employee will work at a desk in a cubicle, surrounded by other employees. It is fast-paced and requires positive social interaction. The noise level in the work environment is minimal. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit, stand, walk, reach with hands and arms and use fingers to type and operate a mouse. Vision abilities include: close vison, peripheral vision, depth perception color identification and the ability to adjust focus. Communication abilities include: talking, writing, typing and hearing. The employee may occasionally lift and/or move items up to 20 pounds. Position Type/Expected Hours of Work This is a full-time position, and regular hours are Monday through Friday, 8:30 a.m. to 5 p.m. Extended hours may be required when production schedules dictate. Required Education and Experience Associates degree in Mechanical or Structural Design or a combination of 3 years of experience or trade school with a High school diploma/GED. Preferred Education and Experience A post-secondary degree in printing, graphic arts or related discipline and a minimum of 3 years in the folding carton industry. Additional Eligibility Qualifications Legally eligible to work in the United States and successful completion of background and drug screens. EEO Statement Arkay provides equal employment opportunities to all persons. This policy applies to hiring, termination and promotion; compensation; schedules and job assignments; discipline; training; working conditions, and all other aspects of employment. As an employee, you are expected to honor this policy and to take an active role in our EEO policy. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, shift and machine assignments, and activities may change at any time with or without notice.

Job DescriptionMulti-discipline architectural, engineering, and environmental consulting firm is seeking a Senior Structural Engineer for their Huntington, New York office! Responsibilities: • Lead/manage the design team in executing/delivering structural engineering assignments and plans, • Prepare calculations, charts and graphs, • Monitor work for code compliance and accepted engineering practices, • Projects include low to mid rise buildings and concrete structures, • Perform inspection/analysis of existing buildings, • Oversee development of construction drawings and design specifications for bids, • Develop proposal letter that includes technical scope and fee, • Prepare client letters and reports, • Manage projected financial budgets, • Mentor/train junior staff Requirements: • Bachelor’s degree in Civil Engineering with a focus on Structural Engineering, • 8+ years of Structural Engineering experience, • EIT required, • PE License preferred, • Experience managing budgets, • Supervisory experience, • Experience writing proposal preferred, • Knowledge of ETABS, STAAD.Pro, RAM preferred, • Knowledge of Revit preferred, • Proficient in Microsoft Word and Excel Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job ID: 554164689 Location: 1111 Stewart Avenue, Bethpage, NY 11714 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting-edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary Lightpath is seeking a Network Facilities Engineerto manage and oversee the critical facility infrastructure to include but not limited to structural, electrical, mechanical and plumbing of our owned and external vendor colocation facilities. Responsibilities include the tracking all assets, scheduling of preventative maintenance, infrastructure upgrades, monitoring of each facility from an infrastructure maintenance, infrastructure upgrade, emergency response,housekeeping, customer support prospective. We're looking for a skilled, enthusiastic colocation operations engineer to help organize and operate several colocation facilities from an infrastructure maintenance and upgrade prospective. This position is responsible for the support of planning, designing, and engineering of power and space allocations within the Lightpath facilities and Datacenters. Individuals in this position are responsible for supporting 100% uptime for the Datacenter and its customers. The power and space solution will also include the budgetary approval process as well as project management of the solution to completion. The Network Facilities Engineer will validate all solutions are complete and meet the quality standards. Also, all necessary databases and systems updates are required. It is expected that he/she will be self-motivated, have a good attention to detail and able to self-manage capital projects with an outstanding professional attitude. Will track all aspects of operations and performance of Critical infrastructure and will submit reports that will result in upgrades-based performance and/or capacity. This position will create and submit MOPs (Method of Procedure) and coordinate all work. These facilities consist of leased space within buildings that have power and cooling for Lightpath and customer electronic equipment as well as leased space within a collocation facility that is either a cage or cabinet where electronic equipment is place and or fiber cross connects inner connect to other spaces within the facility or building. These spaces are also ILA huts along a fiber route from New Jersey to Ashburn VA where Lightpath and Lightpath customers house electronic equipment for their leased fiber network from Lightpath. Responsibilities • Oversee all aspects of critical infrastructure maintenance to include but not limited to HVAC, generators, power plants and site BMS within a facility, including requests, plans to modify infrastructure., • Managing vendor maintenance contracts with to perform quarterly, semiannual and annual maintenance on the structural, electrical, mechanical and plumbing critical infrastructure., • Plan and maintain preventative schedules., • Planning, designing, and allocation of power and space allocations within the Lightpath facilities and Datacenters., • Individuals in this position are responsible for supporting 100% uptime for the Datacenter and its customers. The Planning support will include collecting space and power data on a periodic basis and design for network growth/expansion., • The power and space solution will also include project management, project budget tracking, and the oversight of the solution to completion. The engineer will validate all solutions are complete and meet the quality standards., • All necessary databases and systems data updates are required., • Support of emergency response procedures in case of power outages/failure., • Ensure compliance with Telcordia, OSHA, and company standards for Facilities Capital Projects. Monitor capital projects from planning through completion, ensuring quality assurance and compliance., • Maintain compliance and safety, environmental and regulatory standards that would apply., • Manage facility infrastructure upgrades, projects within a facility from a construction vendor prospective., • Oversee all aspects of external colocation spaces from a quarterly review with colocation vendors to understand uptime performance, maintenance records for critical infrastructure, LP fiber capacity., • Provide data/information for all collocation network growth and augmentation activities within an LP facility as well as external vendor facilities., • Drive process and procedure improvements within the organization. Develop and review MOPs (Method of Procedure) and SOPs (Standard Operating Procedure)., • Support to improve facility, network cost, efficiency, resiliency and reliability., • Provide support to installation and activation teams on fiber connectivity related questions, design and architecture., • Help support customer installations with a Lightpath collocation facility., • Interface with customers or potential customers, as needed., • Continuously build relationships with vendors and suppliers, as needed., • Be available for after hours, nights, weekends and holidays in case of a facility outage or issue. Qualifications • 10 + years' work experience in collocation facility operations, maintenance, planning, engineering, and or infrastructure deployment., • Management of critical systems in telecommunications facilities is preferred., • A good understanding of telecommunication networks and related equipment., • Strong knowledge of general industry networking technologies, including UPS, Generators, and Mechanical systems., • Strong knowledge of DC and AC power infrastructure in telecommunications and Datacenter environment, including UPS, generators, transformers and power distribution systems., • Experience in the installation of large amp-hour Wet Cell and VRLA battery strings., • Familiarity with various test equipment such as Medtronic's, Fluke, etc., • Working knowledge of building codes, environmental regulations, and safety standards., • Excellent documentation of records and reporting and good communication skills., • Familiar with collocation inventory systems, BMS systems, biometric access, video surveillance systems, electrical and cooling infrastructure systems, OSP networks, cross connect understanding., • Proficiency in using Microsoft Office, including advanced features of Excel and Word, as well as Visio and office systems (e.g., Netcracker, SalesForce, etc.)., • Highly organized and strong interpersonal skills to effectively communicate the impact of design alternatives and negotiating agreements within the project team., • Ability to adapt to a changing environment., • Ability to multitask, prioritize and manage time effectively. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $115,000- $125,000/year. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience.

Job Description An established 50-year Long Island–based Real Estate Development, Contracting, and Construction Management firm specializing in commercial/industrial, institutional, and multi-family residential projects is seeking a results-driven Construction Field Supervisor / Superintendent with 10+ years of experience in ground-up multifamily and mixed-use construction, specializing in comprehensive horizontal construction management. Proven expertise in directing all facets of site infrastructure, including earthwork, utilities and paving operations for large, scaled multifamily and mixed-use projects or projects valued at up to 100M. The ideal candidate will bring strong on-site leadership, coordination skills, and a comprehensive understanding of construction operations, with demonstrated ability to support and manage project phases that include site development and infrastructure work, while coordinating effectively with internal teams, consultants, and trade contractors. Skills Required: • 10+ years of commercial construction experience specializing in Horizontal Construction Management for large scaled multifamily and mixed-use developments., • Ground-up construction expertise., • Extensive site development and infrastructure experience., • Proficient in managing horizontal construction scopes., • Expertise in earthwork, utility installation, and paving operations., • Skilled in project mobilization and site logistics planning., • Proven experience with grading, foundation preparation, and civil engineering coordination., • Strong understanding of SWPPP (Stormwater Pollution Prevention Plan) regulations and implementation., • Proven success coordinating trades and managing active jobsites. · Extensive knowledge and experience in plans examination, all disciplines (civil, architectural, structural, MEP), and coordination. · Comprehensive background with multi-family residential developments including experience meeting project schedules and completion. · Must possess the ability to plan, organize, prioritize, and execute multiple tasks within a defined time. · OSHA 30-hour Certificate. • Familiarity with interpreting Building Codes., • Excellent computer skills in the following: MS Excel, MS Project, MS Outlook, MS Word, Adobe Acrobat, including preparing and working with forms, Bluebeam, AutoCAD a plus, Procore, RedTeam or similar construction software a plus, Citrix Sharefile or other cloud-based platforms a plus. Essential Duties and Responsibilities: The candidate must be competent to perform the essential functions of the position, including but not limited to the following: · Manage all site infrastructure elements, including but not limited to earthwork, storm drainage systems, sanitary sewer systems, water lines, and public/private roadways. · Implement and manage the project's SWPPP program, ensuring strict adherence to all environmental and safety regulations on site. · Develop and maintain comprehensive schedules specifically for site work operations, ensuring critical milestones are met and potential conflicts with the vertical build are proactively addressed. · Conduct daily inspections of horizontal work to enforce quality control standards, ensuring all work conforms to plans, specifications, and local codes. • In-depth knowledge of CSI, AIA and Master Format construction requirements common to the industry., • Conduct on site construction meeting., • Prepare and issue on site construction meeting minutes., • Conduct site safety orientation meeting with all subcontractors and field personnel., • Monitor site safety on jobsite. Education and Experience: • 10+ years’ experience in Construction Supervision. Compensation and Benefits: • Competitive salaried position commensurate with experience, • Employment Monday-Friday, 40 hrs. minimum, • Year End performance bonus, • Comprehensive Health benefits, • 401K Retirement Program, • PTO: Vacation, Personal and Sick days in accordance with company policy, • Holidays per company policy Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Employee should be able to sit, stand, and walk for long periods of time., • Must be able to reach., • Must be able to lift a minimum of 25 pounds., • Specific vision abilities required for this job include close vision, distance vision, color vision, and the ability to adjust focus. OTHER: All applicants applying for U.S. job openings must be authorized to work in the United States Equal Opportunity Employer

This role involves managing design teams, overseeing project budgets, and ensuring the delivery of high-quality structural engineering assignments. Candidates should have at least 10 years of experience, excellent communication skills, and proficiency with design software like ETABS and STAAD.

A prominent engineering firm in New York is seeking a talented Structural Engineer with over 10 years of experience to manage projects involving various structures. Join a team focused on innovative engineering solutions and project excellence.

Compliance & Reliability Engineering:. Bachelor’s Degree in Electrical/Computer Engineering or a related field. Reporting to a Senior Engineering Manager, you will take ownership of the full hardware lifecycle—from conceptualizing high-level requirements to seeing your designs move through manuf

Bachelor’s degree in Electrical Engineering or equivalent field.

Successful candidate will have a strong Analog & Digital Electrical Engineering background and experience to support critical component shortages and other design activities for L3Harris tactical radio products and accessories. The individual will work closely with both the design engineering commun

InProduction is looking for talented individuals to join our company to help create and design solutions for high profile nationwide events.The ideal candidate would be able to provide accurate drawings for our sales staff using our drawing library of parts.These drawings would be provided to our cu

Based just outside of Manhattan with 5 offices across the region we are a $50M+ TOP ENR Ranked Civil Engineering Firm! Our core values are centered around our people and our clients. BS in Civil Engineering and an active NY P.

Reporting to a Senior Engineering Manager, you will take ownership of the full hardware lifecycle—from conceptualizing high-level requirements to seeing your designs move through manufacturing and into the field. Compliance & Reliability Engineering:. Bachelor’s Degree in Electrical/Computer

The ideal candidate has a strong interest in life safety and fire protection systems and is eager to grow within a structured engineering and design environment.

Bachelor's Degree in Engineering or Construction Management. As a leading company in engineering, construction, and infrastructure, we provide solutions for electrical transmission, substations, gas pipelines, and solar facilities.

Grow our geotechnical practice in New York/New Jersey by developing new and existing clients and markets while cross-selling GEI's other core business areas including environmental, water resources, waterfront, ecological, and civil engineering consulting. Civil or Geotechnical Engineering required;

Civil Engineering Project Engineer and Project Manager – Land Development.

NV5 (NYSE: TIC) is a leading provider of engineering and consulting services, delivering impactful solutions that improve communities across the country. Landscape Architects, Civil Engineers, Structural Engineers, and Traffic Engineers to prepare plans and specifications for various municipal proje

Cumberland Farms is one of the fastest-growing convenience retailers in the United States, committed to becoming America's #1 'one-stop' destination.The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service.Headquartered in Westborough, Massachu

Wendel is a nationally recognized innovative Architecture, Engineering, Energy Efficiency, and Construction Management firm that collaborates with private and public entities to holistically approach facility and infrastructure projects. A Bachelor's degree in Civil Engineering is required.

Associates Degree in one of the Engineering disciplines or equivalent related fields or life work experience equivalence.

Are you Ready to Launch Your Career?.Catholic Charities Disabilities Services.Imagine yourself as part of an organization with a profound commitment to making a positive impact.When you choose Catholic Charities, you step into a world of endless opportunities, where your efforts collectively contrib

Are you searching for an exciting career opportunity within a dynamic team? Look no further! Walmart is expanding its workforce and looking for a Senior General Facilities Maintenance Technician to join our local, and regional team.If you have experience in this field, we want you to bring your skil

We are looking for a Maintenance Technician to undertake the responsibility to preserve the good condition and functionality of the SJCC.You will perform maintenance tasks of great variety such as painting, HVAC, plumbing, carpentry, landscaping etc.A Maintenance Technician is a professional with th

Our engineering department operates at the intersection of complex mechanical design, embedded software, and RF signals exploitation. Lead the design and structural packaging for ruggedized systems containing integrated electrical and mechanical components. BS in Mechanical Engineering with at least

Talon Air is seeking dedicated and detail-oriented Full-Time, Aircraft Maintenance Technicians to join our 145-repair station.We are seeking candidates who are passionate about aviation and have a strongcommitment to safety and quality.Talon Air is a leading provider of private jet charter service.

Strong communication and interpersonal skills couple with ability to work within a large engineering team are required. The L3Harris Communication Systems segment is seeking a highly motivated, team-oriented Electrical engineer experienced with Digital Design to join an engineering organization that

The Service Installer is an essential part of Tesla's Field Energy Operations team.Employees working in this role are leading the drive towards completing Tesla's mission-to accelerate the world's transition to sustainable energy.As a Service Installer, each employee is working with the latest solar

Location : 999 South Oyster Bay Road, Bethpage, NY 11714.Citizenship Requirement: US Citizens.WORK SHIFT: 1st Shift (9/80A) - every other Friday off but OT may result in working off-Friday's or weekends as needed).Typically performs work in one or more of the maintenance trades: carpentry, plumbing,

Understand safe methods of draining and cleaning pools to prevent pool popping or structural damage.

Maintenance Technician – Manufacturing.We are seeking a skilled Maintenance Technician to join a growing precision manufacturing company supporting a wide range of industries including automotive, medical, and advanced electronics.This role plays a critical part in keeping complex equipment runnin