Trabajos technical product manager en Deer Park, New YorkCrear alertas

At a glance: • A sales leadership role with 70% of time spent in the field and 30% spent in the office, leading and coaching a team of Outside Sales Representatives selling ADT's core residential product: Home Security and Home Automation, • Benefits include paid training, paid time off, W-2 status, comprehensive health/vision/dental insurance and 401k, • In this role, you will set the tone for your team's success by leading from the front, while overseeing and guiding a team. Additionally, you'll be responsible for interviewing, hiring, training and motivating the team on a daily basis. Safe Haven Security, ADT's largest authorized dealer is EXPANDING! We are looking to add a TALENTED, HARD-WORKING Sales Manager to our growing team! We're looking for a motivated, go-getter with some real HUSTLE! Previous management experience is preferred - but we'll develop a high-performing sales rep with the right ATTITUDE! This is a W-2 position with benefits - so you supply the DRIVE, we'll handle the rest! Job Summary: The Sales Manager will be responsible for managing the daily activity of a local Outside Sales team Responsibilities in the Office: • Interview and hire Outside Sales Representatives, • Assign and manage leads, • Track and audit sales, • Conduct training, 1:1 coaching/development, facilitate team huddles, • Support your team by controlling attrition, critical to your overall success, • Daily office hours: 10:00am - 2:00pm Responsibilities in the Field: • Maintain and/or exceed minimum personal sales requirements, • Motivate the team through phone and group chat communication, • Ride-alongs for new hires and struggling sales reps, • Perform other duties as requested by Regional Sales Management, • Daily field hours: 2:30pm - 8:30pm Qualifications: • 3+ years of Outside Sales experience, supervisory preferred, • Ability to work efficiently with technical devices including laptops, tablets, and other similar support tools, • Innate ability to lead and motivate others, • The ability to travel within assigned territories and company facilities using a reliable personal vehicle Working Conditions: • Office work required daily (30%), • Field work required daily in all weather and climate conditions (70%), • Occasional travel, as required Our Sales Managers Receive: • Uncapped commissions on personal sales, • Uncapped overrides on your sales staff, • Monthly performance bonuses, • Weekly base salary, • Paid training, • Paid vacations, • Health, dental, vision, & 401k benefits, • first year income hitting minimum requirements $127,600 Safe Haven Security is an Equal Opportunity Employer About Safe Haven At Safe Haven Security LLC, we are more than just a home security company. We are a team of dedicated professionals who are passionate about making a difference in the lives of our customers and our employees. Our mission is to provide peace of mind and protection to families across the country, and we achieve this by offering cutting-edge security solutions and exceptional customer service. When you join Safe Haven Security LLC, you become part of a dynamic and innovative organization that is committed to excellence. We believe in investing in our employees and providing them with the tools and resources they need to succeed. We offer comprehensive training programs, ongoing support, and opportunities for growth and advancement. At Safe Haven Security LLC, we foster a culture of teamwork, collaboration, and mutual respect. We believe that our employees are our greatest asset, and we strive to create a positive and inclusive work environment where everyone feels valued and appreciated. As a company, we are dedicated to staying at the forefront of the industry, constantly evolving and adapting to meet the changing needs of our customers. We embrace innovation and technology, and we are always looking for talented individuals who share our passion for excellence. If you are looking for a rewarding career in the home security industry, Safe Haven Security LLC is the place for you. Safe Haven has won several awards including being one of "America's Greatest Places to work" from Newsweek and is the 6-time winner of Inc. Magazine's America's Fastest-Growing Private companies. Join our team and be part of an organization that is committed to making a difference and creating a safe and secure environment for every home we serve. Safe Haven Security is an Equal Opportunity Employer / Veterans / Disabled. We celebrate diversity and are committed to creating an inclusive environment for all employees. Why Join Safe Haven • Weekly pay, fully commissioned role with uncapped earning potential, • Monthly bonuses, incentives, and paid vacations, • Paid Time Off (PTO) program and paid holidays, • Medical, Dental, Vision, 401k, and Life Insurance Coverage, • Employee Assistance Program (EAP), • Career Development, • Recognized by Newsweek's "America's Greatest Workplaces"!, • Safe Haven is the largest employee-based ADT Authorized Dealer

Job Description Position: Production Supervisor Department: Production Reports to: Unit Manager About the Company: Water Lilies Food, LLC is a private equity-backed manufacturer and distributor of premium Asian-inspired food. Established for 30 years, the company moved in 2020 to a new state-of-the-art facility in Bay Shore, NY (Suffolk County Long Island) and is experiencing rapid growth. We are developing and supplying product for some of the leading retailers, wholesalers, and branded Asian-appetizer businesses. Our Vision is to be the preferred supplying partner of premium Asian-inspired food. We achieve this by living up to our Mission to deliver our products and services with attention to detail, a continuous improvement mindset, agility, and authenticity. Our culture is a place where employees can have a meaningful impact on the business and organization. We work collaboratively and humbly strive to get better every day while being respectful of all talents and backgrounds. The company is embarking on another major expansion project and is expecting to more than double the business in the next 3-5 years. Job Summary: This role has responsibility to achieve productivity, efficiency, customer service, cost, quality, safety and employee engagement objectives through both individual and team contributions. Provides direction, leadership, development and support to direct reports through empowerment, teamwork, on-the-job assignments and continuous improvement projects and initiatives. Develops, implements and promotes safety programs and safe work practices through involvement in plant safety teams, programs and initiatives. Promotes sound employee & labor relations within the department by developing and maintaining effective organization with qualified personnel. Develops, promotes, and supports continuous improvement and other cross-functional initiatives. Ensure smooth operation in a fluid, fast-paced environment. Responsibilities: • Interpret job order specifications and assign responsibilities accordingly., • Partner with management to ensure production goals and customer deadlines are consistently met., • Inspect products and packaging to verify conformance with established quality and safety standards., • Lead and supervise hourly employees, ensuring proper training, adherence to safety protocols, and compliance with operational procedures., • Communicate and enforce all company safety guidelines and food safety protocols in alignment with regulatory and internal standards., • Establish or adjust work procedures and priorities to meet production schedules., • Analyze and recommend improvements to production methods, equipment performance, and product quality., • Recommend and implement changes to working conditions or equipment usage to enhance efficiency and overall department performance., • Investigate and resolve work-related issues while providing guidance and support to employees., • Maintain accurate timekeeping and production records., • Collaborate with Line Leads and operators to ensure all materials, equipment, and machinery meet production requirements., • Communicate effectively with management and cross-functional departments, providing updates on production efficiency, equipment status, and workforce needs., • Ensure consistent compliance with all food safety and workplace safety requirements., • Assign daily tasks, monitor employee performance, and provide coaching, feedback, and corrective action when necessary., • Foster a positive, collaborative, and results-driven work environment that promotes teamwork and open communication., • Oversee the timely and efficient completion of production activities in alignment with company objectives., • Manage equipment and facility utilization to maintain operational continuity and efficiency., • Identify and troubleshoot operational issues, escalate significant concerns, and coordinate resolutions with the Operations Manager., • Conduct routine safety inspections, identify potential hazards, and implement corrective actions., • Monitor and uphold product quality standards to ensure compliance with customer specifications., • Track and report on key performance indicators (KPIs), including productivity, quality, and safety metrics., • Prepare detailed shift reports and propose process improvements based on performance data., • Support scheduling, attendance tracking, and timecard management for hourly personnel., • Assist in the onboarding, training, and development of new team members., • Promote continuous improvement by encouraging participation in training and skill-development programs., • Strategically schedule and manage labor resources to optimize operational throughput and efficiency., • Maintain a strong technical understanding of equipment, actively supporting Total Productive Maintenance (TPM) initiatives., • Perform additional duties as assigned by management to support departmental and organizational goals. Requirements / Competencies: • Associate degree or equivalent professional experience required., • Minimum 2 years of supervisory or operations experience, preferably within a manufacturing, warehouse, or production environment., • Experience in the food processing industry (USDA or FDA-regulated) preferred., • Experience with both Raw and Ready-to-Eat (RTE) processes is a plus., • Proficiency in Microsoft Office applications (Word, Excel, PowerPoint)., • Strong analytical skills with exceptional attention to detail., • Must be bilingual (English/Spanish). Core Competencies: • Planning & Organizing: Prioritizes and coordinates resources effectively to meet productivity goals., • Problem Solving: Identifies root causes, evaluates alternatives, and implements effective solutions., • Leadership: Provides direction, sets expectations, and develops team members to achieve performance excellence., • Professionalism: Demonstrates tact and composure under pressure; fosters collaboration and open-mindedness., • Safety & Security: Adheres to all safety and security protocols; proactively identifies and reports hazards; ensures safe equipment use and workplace practices. Physical Requirements: This role requires physical mobility of the employees as they will need to enter various parts of the factory. The employee will occasionally move within the office to access office machinery, file cabinets and collaborate with colleagues. Consistent use of office equipment such equipment may include but is not limited to computers, phones, printers and copiers. The employee will be required to frequently communicate with both internal staff members as well as external parties or customers and must be able to convey accurate information. This position may require repositioning of or movement of equipment weighing up to 50 pounds. This job description reflects management’s assignment of essential functions; it does not exclude or restrict the tasks that may be assigned. This job description is subject to change based on company needs as expressed by management.

Nav-Tech Inc. | Hauppauge, NY (on-site) | Full-time | Relocation assistance available About Nav-Tech Nav-Tech Inc. is a growing manufacturer of engineered-to-order low- and medium-voltage switchgear, power distribution equipment, and custom electrical enclosures, serving contractors, utilities, and OEM customers across the New York metro area and across the USA. Nav-Tech is a division of Eleconnex, a private equity-backed electrical products platform, and is investing in its engineering organization to support a growing backlog of utility and commercial projects. Engineers at Nav-Tech own designs end to end — from customer specification through drawings, production support, and testing — rather than working on one narrow slice of a large product line. Position Summary We are seeking an Electrical Design Engineer with 5–10 years of experience designing low- and/or medium-voltage switchgear and power distribution equipment. The engineer will translate customer specifications into compliant, manufacturable switchgear designs; produce one-line diagrams, layout and fabrication drawings, and bills of material; select protective devices; and support production and testing through release. This is a hands-on design role in a fast-moving engineered-to-order shop, reporting to the Engineering Manager. Essential Duties and Responsibilities • Design low- and medium-voltage switchgear, switchboards, and power distribution assemblies to UL 891 and/or UL 1558, from customer specification to released drawing package, • Prepare one-line diagrams, three-line and control/wiring diagrams, equipment layouts, and bills of material, • Perform or review short-circuit, coordination, and load calculations; select and apply molded case and power circuit breakers, disconnects, metering transformers, and copper bus, • Ensure designs comply with NEC, NEMA, ANSI/IEEE, and applicable UL standards; support UL construction reviews and witness testing, • Use 2D/3D CAD to create models and drawings for customer projects, enclosures, and bus work, • Review customer specifications and submittals; respond to technical questions from customers, consulting engineers, and inspectors in coordination with the sales team, • Support production during build — resolve design questions on the floor, disposition non conformances, and drive design changes that reduce cost or lead time • Write and execute test protocols and final test reports for completed equipment, • Contribute to engineering standards, templates, and process discipline as the department grows Required Qualifications, • Bachelor’s degree in Electrical Engineering or a related engineering discipline from an accredited university, • 5–10 years designing low- or medium-voltage switchgear, switchboards, or power distribution equipment, • Working knowledge of UL 891 and/or UL 1558, NEC, NEMA, and ANSI/IEEE standards • Experience preparing one-line diagrams and performing short-circuit and protective device selection/coordination, • Proficiency in 2D/3D CAD (e.g., AutoCAD, AutoCAD Electrical, SolidWorks, or Inventor) and Microsoft Office, • Strong analytical and problem-solving skills; able to manage multiple projects in an engineered-to order environment, • Clear written and verbal communication with customers, production, and management Preferred Qualifications, • Experience at a switchgear or power equipment manufacturer such as Eaton, Schneider Electric, Siemens, ABB/Hitachi Energy, ASCO Power Technologies, Powell Industries, Myers Power Products, Vertiv, or similar, • Experience with power system analysis software (SKM, ETAP, or EasyPower), • Familiarity with sheet metal design, copper bus fabrication, and GD&T, • Experience supporting UL file maintenance, witness testing, or field labeling Schedule and Location Full-time, on-site at 155 Marcus Blvd, Hauppauge, NY 11788. Monday–Friday, 8:00 AM–5:00 PM. Relocation assistance is available for qualified candidates. Benefits Benefits include medical coverage, paid time off, and holidays. Salary Range $100k-$115k

Inside Sales Representative Location: Amityville, NY- In Person Job Type: Full-Time About the Role Speco Technologies is looking for a motivated, personable, and career-driven Inside Sales Representative to join our sales team in Amityville, NY. As an Inside Sales Representative, you will be assigned a sales territory and work in partnership with a Regional Sales Manager to support and drive growth within that region. While you will collaborate closely with the Regional Sales Manager, this is an independent role with its own responsibilities, customer relationships, outreach initiatives, and account-development goals. The Inside Sales Representative serves as an additional sales resource within the territory — proactively developing accounts, identifying opportunities, conducting customer outreach, coordinating product demonstrations and trainings, and maintaining consistent follow-up with customers. This is not an administrative or sales-assistant position. You will have ownership of your day-to-day activity and customer relationships while collaborating with the Regional Sales Manager on territory priorities and growth opportunities. This is a salaried position and does not include commission. This is a great opportunity for someone looking to build experience in B2B sales and account development within the security technology industry. Previous security industry experience is not required; training will be provided on Speco's products, systems, customers, and sales processes. What You'll Do • Partner with an assigned Regional Sales Manager to support and grow an assigned territory, • Conduct outbound calls, emails, campaigns, and customer follow-up, • Develop relationships with new and existing dealers, integrators, distributors, and other business customers, • Identify new business opportunities and help move existing opportunities forward, • Manage assigned accounts, leads, and follow-up activities, • Schedule and participate in customer meetings, product demonstrations, and trainings, • Identify customer needs and connect customers with appropriate Speco products and resources, • Collaborate with the Regional Sales Manager on territory priorities, target accounts, and growth initiatives, • Follow up on quotes, demonstrations, projects, campaigns, and other opportunities, • Maintain accurate customer activity and next steps in HubSpot CRM, • Participate in sales campaigns, new product initiatives, and targeted account-development efforts, • Develop a strong understanding of Speco's product portfolio and the security technology industry, • Work toward individual activity and department goals What We're Looking For • 1+ year of sales, customer service, account management, business development, or other customer-facing experience preferred, • Strong verbal and written communication skills, • Comfortable initiating conversations with customers by phone and email, • Ability to build professional relationships and communicate confidently with customers, • Organized and able to manage multiple accounts and follow-ups, • Self-motivated with the ability to work independently while collaborating as part of a sales team, • Comfortable working toward activity and performance goals, • Willingness to learn technical products and solutions, • Experience with HubSpot or another CRM is a plus, but not required, • Experience in security, technology, distribution, or B2B sales is a plus, but not required, • Bachelor's degree preferred, but not required Why Join Speco Technologies? This role provides hands-on experience across multiple areas of B2B sales, including prospecting, account development, territory strategy, customer relationship management, product demonstrations, CRM management, and opportunity development. You'll have the opportunity to own your work while partnering with an experienced Regional Sales Manager, giving you exposure to both inside and field sales while developing your own customer relationships. For someone looking to build a long-term career in sales and account development, this position provides an opportunity to develop valuable skills and industry knowledge within the security technology space. Compensation & Benefits • $50,000–$60,000 annual salary, • This role begins as a salary-only position. As Speco’s Inside Sales program expands, we anticipate introducing additional incentive-based compensation tied to territory growth and account development., • 401(k), • Health insurance, • Dental insurance, • Vision insurance, • Paid time off Work Location: In person — Amityville, NY

Customer Growth Manager - Defense Search OVERVIEW Are you looking for a new career opportunity with an exciting Defense/Aerospace company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below. Immediate opening for a Customer Growth Manager in Hauppauge, NY who possesses: • 4+ years of commercial, customer relationship management, inside sales, or related customer growth experience, • Strong analytical ability with the ability to interpret data and translate it into meaningful business insight, • Experience with semiconductors, discrete semiconductors, electronic components, or related technical products highly preferred, • Proven ability to convert a high volume of quotes and leads into new or expanded business opportunities, • Strong customer engagement skills with a proactive, revenue-driving sales mindset Email resumes to smartin@defensesearchusa.com or call 858.227.4596. FULL DESCRIPTION: We are seeking a Customer Growth Manager to grow a portfolio of existing customers across distribution, contract manufacturers, and direct end users within a discrete semiconductor and electronic components environment. This permanent, onsite role is responsible for using customer, quote, pricing, product, and pipeline data to identify growth opportunities, increase volume, win new part numbers and programs, reactivate declining business, and pursue opportunities through consistent customer engagement. The ideal candidate will have strong commercial experience, excellent analytical skills, a proactive sales mindset, CRM/ERP experience, and the ability to turn data into action while building strong customer relationships. The selected candidate will be responsible for: • Owning sales performance for an assigned customer base, • Understanding performance against targets and identifying customers or products contributing to gaps, • Taking action to close sales gaps and grow assigned accounts, • Growing business by increasing volume on products customers already purchase, • Winning new part numbers, new programs, and expanded customer opportunities, • Reactivating business that has declined, stopped, or become inactive, • Supporting sales efforts focused on commodity semiconductor products with identified market demand, • Proactively engaging customers through calls, email, LinkedIn, and other outreach channels, • Building relationships across purchasing, engineering, program management, and supply chain contacts, • Understanding customer demand, upcoming requirements, target pricing, and competitive alternatives, • Managing opportunities from initial quote request through purchase order, • Ensuring customers receive accurate and competitive quotes quickly, • Following up consistently until opportunities result in an order or a clear reason for loss, • Understanding why business is won or lost based on price, availability, lead time, competition, and timing, • Sharing win/loss insights to improve pricing, stocking, and sales strategy, • Analyzing customer purchase history, quote activity, and product-level data, • Identifying where demand is growing, where business has declined, and where share may be lost, • Turning analysis into a prioritized plan for selling activity, • Evaluating the results of pricing, stocking, and bundling actions, • Maintaining accurate customer, contact, opportunity, and quote information in Salesforce, • Updating value, likelihood of closing, next steps, and timing within CRM systems, • Participating in monthly sales forecasts, • Providing leadership with clear visibility into expected business, risks, and actions being taken, • Participating in or helping establish a recurring win/loss review process, • Supporting pricing, stocking, and sales strategy through trend feedback and performance insights, • Providing Pricing and Supply Chain teams with competitor pricing, target pricing, customer requirements, availability needs, lead time needs, and future demand information, • Identifying recurring issues that make it harder to win business, • Estimating potential lost revenue related to pricing, availability, quote turnaround, or internal process issues, • Bringing leadership recommended solutions to improve sales performance, • Supporting post-sale order execution when coverage requires it, • Processing purchase orders, order acknowledgements, changes, cancellations, returns, and RMAs as needed, • Resolving delivery or documentation issues as needed, • Supporting day-to-day account servicing, accurate system records, technical inquiries, quality inquiries, and urgent customer needs, • Working cross-functionally with sales, pricing, supply chain, operations, customer relationship teams, and leadership, • Using Salesforce, quoting tools, analytics tools, AS/400, and related platforms to support customer growth, • Performing other duties as assigned The selected candidate will also possess: • High school diploma or GED required, • Associate degree or equivalent experience required, • Bachelor's degree preferred, • 4+ years of commercial, customer relationship management, inside sales, operations, or related experience required, • 5+ years of related commercial, customer relationship management, or operations experience preferred, • Experience in inside sales, account growth, customer growth, account management, customer relationship management, or account executive-style roles preferred, • Experience with semiconductors, discrete semiconductors, electronic components, industrial products, technical products, or related distribution strongly preferred, • Experience selling to or working with distributors, contract manufacturers, direct end users, purchasing teams, engineering teams, program management teams, or supply chain teams preferred, • Strong analytical ability required, • Ability to interpret data and translate it into meaningful business insight required, • Strong commercial and revenue-driving mindset required, • Proactive and opportunistic sales approach required, • Ability to convert quotes, leads, and customer activity into new or expanded business required, • Ability to engage customers directly through calls, emails, LinkedIn, and follow-up activity required, • Ability to work in a phone-forward sales role required, • Strong cross-functional communication skills required, • Ability to explain problems clearly, articulate opportunities, and influence stakeholders across functions required, • Ability to balance analytics with interpersonal customer engagement required, • Experience with CRM and ERP systems preferred, • Salesforce experience preferred, • AS/400 experience preferred, • Experience with quoting, analytics, sales engagement, or outreach tools preferred, • Experience with Salesloft or similar sales execution platforms preferred, • Comfort learning new tools and helping build better sales processes, • Ability to use customer data, quote data, product data, pricing data, and market information to identify growth opportunities, • Understanding of the relationship between sales activity, customer demand, operations, supply chain, and pricing preferred, • Ability to maintain accurate customer, opportunity, quote, and pipeline records, • Ability to support forecasts, win/loss reviews, customer follow-up, and sales strategy improvement, • Strong organization, follow-through, and time management skills, • Strong written and verbal communication skills, • Ability to work onsite in Hauppauge, NY, • Ability to support a full-time, permanent opportunity, • No sponsorship available Physical Requirements: • Ability to sit and work at a computer for extended periods while reviewing customer data, quote activity, product information, CRM records, ERP information, sales reports, forecasts, and analytics, • Ability to communicate by phone, email, LinkedIn, video meeting, and in person throughout the workday, • Ability to review customer records, pricing information, quote details, purchase history, opportunity data, sales dashboards, reports, and computer screens for extended periods, • Ability to use hands and fingers for typing, CRM updates, reporting, documentation, quote follow-up, customer communication, and standard office tasks, • Ability to occasionally stand, walk, bend, reach, and move throughout office, sales, warehouse, production, or customer-facing environments as needed, • Ability to occasionally lift, carry, or move standard office files, documents, supplies, or small materials as needed, • Ability to maintain professionalism, accuracy, and attention to detail while managing customer relationships, sales opportunities, and confidential business information Salary Range: $85,000 to $100,000/year base, with $120,000 OTE For immediate and confidential consideration, please email your resume to smartin@defensesearchusa.com or call 858.227.4596. More information can be found at _.

Job Title: CostPoint/ERP Program Manager (Remote) Job Location: Melville, NY | Remote, but or site for local candidate Job Type(s): Full-time | Direct-hire Note: Strong preference is for someone with experience in Manufacturing / Engineering industry. Job Overview: Responsible for implementing, improving, and maintaining business systems that support the entire organization. This role interfaces with all operational areas—including Contracts, Program Management, Engineering, Planning, Procurement, Manufacturing, Test, Manufacturing Engineering, SMT, Machine Shop, Stockroom, Shipping/Receiving, and Quality—to ensure workflow efficiency, data integrity, and system reliability. The role owns the architecture and data flow of the Deltek Costpoint ERP system and leads integrations between enterprise systems. Responsibilities Enterprise Systems Ownership & Integration • Fully own the design of system architecture and data flow for Deltek Costpoint ERP., • Lead integration efforts between various business systems., • Maintain systems currency and oversee ERP updates and migrations. Business Process & Workflow Optimization • Drive workflow effectiveness to improve processes, efficiency, quality, and schedule., • Build, maintain, and automate workflows to reduce manual work., • Ensure efficient electronic, paperless workflow between design and manufacturing., • Identify and evaluate opportunities to apply AI tools. Cross‑Functional Collaboration • Serve as liaison between end users, business units, consulting teams, corporate partners, and system OEMs., • Translate business needs into actionable plans and functional requirements for software OEMs., • Communicate user feedback, issues, and enhancement requests clearly and effectively. Project Management • Manage all business system implementation projects, ensuring delivery within budgets and schedules., • Lead user acceptance testing (UAT), collect feedback, and ensure stakeholder alignment., • Systems Administration & Data Support, • Develop reports to support data analysis and operational visibility., • Manage multiple SharePoint sites and document libraries., • Coordinate with IT and developers to ensure solutions meet security and technical standards. Training, Documentation & Support • Deliver user training and create documentation, SOPs, and basic security awareness guidelines., • Work with leadership to identify hardware needs and assist in selecting equipment. Qualifications • Bachelor’s degree in business management with 9 years prior related experience, Masters with 7 years prior related experience., • ERP System Administration experience., • Experience with Deltek Costpoint ERP (required)., • SharePoint experience (required). Preferred Qualifications • Microsoft Power Automate experience., • Microsoft Power BI experience., • Experience with Manufacturing Execution Systems (MES)., • Experience with Product Lifecycle Management (PLM)., • Familiarity with ISO and AS9100 standards. Core Competencies • Strong understanding of ERP architecture and system integrations., • Ability to drive cross‑functional alignment and workflow improvements., • Excellent analytical, documentation, and communication skills., • Strong project and change management capabilities., • Ability to balance technical depth with business needs. To conform to U.S. Government export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S. (e.g. Green Card holder), or a protected individual as defined by the International Traffic in Arm Regulations (ITAR).

Position: Maintenance Supervisor Department: Maintenance Reports to: Maintenance Manager About the Company: Water Lilies Food, LLC is a private equity-backed manufacturer and distributor of premium Asian-inspired food.Established for 30 years, the company moved in 2020 to a new state-of-the-art facility in Bay Shore, NY (Suffolk County Long Island) and is experiencing rapid growth. We are developing and supplying product for some of the leading retailers, wholesalers, and branded Asian-appetizer businesses. Our Vision is to be the preferred supplying partner of premium Asian-inspired food.We achieve this by living up to our Mission to deliver our products and services with attention to detail, a continuous improvement mindset, agility, and authenticity. Our culture is a place where employees can have a meaningful impact on the business and organization. We work collaboratively and humbly strive to get better every day while being respectful of all talents and backgrounds. The company is embarking on another major expansion project and is expecting to more than double the business in the next 3-5 years. Job Summary: The Maintenance Supervisor reports directly to the Senior Maintenance Manager. The individual is responsible for being the liaison between the Maintenance Manager and the Maintenance Crew with collaboration with the Maintenance Planner and PM schedule. The Maintenance Supervisor is also responsible for interacting with and supporting plant personnel, enforcing all maintenance procedures, executing, and maintaining all employee safety policies, manufacturing safety policies and associated administrative policies. The Maintenance Supervisor is expected to be a role model for the company culture. Participates as a functional maintenance department and is a driving force to coordinate with the supervisors on other shifts and other departments. Responsibilities: • Directs maintenance personnel to ensure that all systems operate at their highest capability to meet required production schedules, quality, costs and schedule priorities, • Improves reliability, maintenance, and processing methods to reduce cost and avoid loss of production because of equipment malfunction or failure time., • Determines equipment capabilities, safety, and operational condition in coordination with the other Supervisors and technicians., • Develop preventative maintenance procedures that are cost effective and increase the operational life of the equipment., • Seek and implement continuous improvement of the process through equipment improvement modifications., • Assist in the development of the system and operational standards and corrective actions., • Develops, implements, and reviews regularly, site-specific maintenance logs for department., • Coordinates, arranges, and supervises, or provides for the completion of corrective and preventive maintenance in accordance with company operating procedures, practices and financial considerations., • Provide maintenance training to include the effective utilization of the maintenance logs, completion of routine maintenance specific to facility, equipment operations and support., • Assists workers in diagnosing malfunctions in machinery and equipment., • Studies production schedules and estimates worker hour requirements for completion of job assignment., • Assist with preparing requisitions to determine the number of spare parts to be kept in inventory., • Ensure that equipment and facilities are maintained in a safe, operable condition and/or arrange for replacement/upgrades., • Establishes procedures and contacts to ensure timely repairs of equipment., • Directs workers in electrical, electronic, mechanical, hydraulic, and pneumatic, and utility systems maintenance and repair of machinery and equipment., • Director of workers engaged in dismantling, assembling, and installing industrial machinery., • Analyzes production downtime reports, determines opportunities, and initiates action plans to increase efficiency, • Assist with the supervision of Maintenance staff including but not limited to performance management and employee development, etc., • Communicate with outside agencies i.e. contractors, equipment suppliers, technical consultants and vendors., • Continuous and close coordination with the Maintenance Manager, other Maintenance Supervisor(s), other Team Members, and Human Resources Requirements / Competencies: • Stays organized in businesses with robust PM schedules and continuous work requests, • Communicates clearly and often with contractors, maintenance staff, and executives, • Adheres to budget requirements in making purchasing decisions, • Thinks ahead about tasks that must be completed next to provide exceptional administrative support, • Strong analytical and problem-solving skills, and excellent interpersonal skills, including good oral and written communication skills, and previous experience using computers, • Proficient to excellent knowledge of MS Office and CMMS Systems, • Must be able to use, or learn to use, the equipment and tools used to perform the job, • Must be able to perform all job functions safely, • Must meet the company standards for the job, • Must be able to follow instructions, • Must be able to understand and follow all written SOP’s, • Must be able to understand SDS (Safety Data Sheets), • Must be able to work the scheduled / assigned times and required overtime for the position, • Must be able to stand and walk for extended periods of time, • Must be able to lift 50 lbs., • Flexible working hours are highly desirable, • Bilingual (English/Spanish) highly desirable Physical Requirements: The employee will occasionally move within the office to access office machinery, file cabinets, and collaborate with colleagues. Consistent use of office equipment, such equipment may include but not limited to computers, phones, printers, and copiers. The employee will be required to frequently communicate with both internal staff members as well as external parties or customers and must be able to convey accurate information. This job description reflects management’s assignment of essential functions; it does not exclude or restrict the tasks that may be assigned. This job description is subject to change based on company needs as expressed by management.

JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO: Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! Position Summary The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction and Forestry Machinery, Compact Construction Equipment, and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. Key Responsibility Areas (KRA) • Track construction bid results to identify opportunities with existing accounts and prospects., • Determine customer needs and select applicable equipment configurations to meet customers’ technical requirements and applications., • Perform trade evaluations on new quote opportunities., • Perform price calculations and generate customer quotations., • Write bid specifications that favor John Deere and Allied Products, • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services., • Perform Operation & Maintenance training on new equipment deliveries., • Attend and participate in trade shows, conferences and other industry related networking events., • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles., • Maintain records of customer communications, personal visitations and opportunities in the company CRM system., • Communicate any client information that may affect company decisions to appropriate department personnel as needed., • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes., • Maintain knowledge of competitor’s products and identify and report intelligence on competitors pricing or marketing strategies to management and peers., • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals., • Maintain current knowledge of JESCO products., • Understand and comply with established guidelines that ensure a safe and healthy work environment., • PERFORM other related duties as assigned. Performance Measures • New and Used Equipment Sales, • Rental Revenue, • Gross Profit Margin Achieved, • Market Share, • Number of New Accounts, • Call Frequency Achievement, • Trade Appraisal Detail & Accuracy, • Conflict Resolution, • Product & Selling Skills Learning, • Timely and Accurate Sales Reporting Knowledge and Skill Requirements • Bachelor’s degree., • Five years of proven outside sales experience., • Knowledge of construction and/or industrial equipment operation and applications., • Strong interpersonal and oral communication skills., • Strong presentation skills and professional appearance., • Excellent planning and organizational skills., • Strong written communication skills with exceptional presentation, negotiation and business acumen., • Proficiency in Microsoft Office products and CRM systems., • High energy, excellent self-motivation and work ethic. Physical Requirements • Candidates are expected to occasionally operate, demonstrate, climb up and down and walk around the equipment in order to sell to customers., • Candidates should have the physical ability to evaluate equipment for trade. This includes climbing on the equipment and operating the equipment., • Candidates will be expected to drive a vehicle and cover a particular assigned territory. Driving in a vehicle may be up to 80% of their day., • Candidates must be able to travel by air to attend any Sales related or professional development events or as required by the company., • Candidates should be able to complete at least six to ten effective customer visits per day., • Candidates should be able to lift and carry 50 pounds., • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments in order to meet with customers on jobsites., • Valid Driver’s License - must meet insurance underwriting requirement We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Photographer / Videographer Summary / Objective We are seeking a highly skilled Photographer/Videographer with an exceptional eye for lighting, composition, movement, and visual storytelling. This individual will be responsible for capturing high-quality photo and video content that reflects the technical, premium, and dynamic aesthetic of our brands. The ideal candidate is equally comfortable behind a camera and working in post-production, with the ability to confidently capture product, athlete, lifestyle, studio, and action-oriented content. This role will support a wide range of creative needs across product launches, campaigns, eCommerce, social media, digital advertising, email, events, and brand storytelling. This is a fast-paced, high-volume role for a creative professional who thrives in a collaborative, in-house environment and is passionate about producing visually compelling content from concept through final delivery. Key Responsibilities Photography & Video Production • Plan, shoot, and deliver high-quality photography and video content for product launches, campaigns, athlete features, events, and ongoing brand initiatives., • Capture product, lifestyle, studio, eCommerce, action, and behind-the-scenes content across a variety of environments., • Photograph and film apparel, accessories, equipment, athletes, and lifestyle subjects with a strong understanding of product positioning and brand aesthetic., • Build and execute effective lighting setups for studio, product, tabletop, lifestyle, and on-location shoots., • Operate professional camera equipment, lighting, audio, and stabilization systems., • Direct and pose talent, athletes, and models when needed to achieve the desired composition and performance., • Manage shoots from pre-production through final delivery, including planning, equipment preparation, shot lists, and file organization., • Travel domestically and internationally for photoshoots, events, campaigns, and other brand initiatives as needed. Editing & Post-Production • Edit and retouch photography using Adobe Photoshop, Lightroom, and/or similar professional tools., • Edit short-form and long-form video content using Adobe Premiere Pro, After Effects, and/or Final Cut Pro., • Perform color correction, color grading, image retouching, sound editing, and other post-production work as needed., • Create multiple photo and video variations optimized for different channels and placements., • Utilize AI-assisted tools where appropriate to improve workflow, create variations, and streamline repetitive production tasks., • Organize and maintain photo and video assets to ensure files are easily accessible and properly archived., • Deliver assets optimized for Instagram, TikTok, YouTube, Paid Social, Email, Web, E-commerce, and digital advertising. Creative Collaboration • Work closely with the Creative Manager and internal teams to develop and execute creative concepts., • Translate creative direction into compelling photo and video content while maintaining brand consistency., • Collaborate with Marketing, Product, E-commerce, and other internal teams to understand content needs and priorities., • Incorporate feedback efficiently and execute revisions within established timelines., • Manage a daily and weekly queue of photography and video requests while balancing planned shoots with last-minute priorities., • Contribute creative ideas and recommendations for improving the quality and effectiveness of visual content. Qualifications & Competencies Technical Skills • Expert knowledge of professional photography and video equipment, including Sony or Canon camera systems., • Experience with GoPro, DJI/Ronin gimbals, drones, and other specialty equipment is a plus., • Strong understanding of lighting, lenses, exposure, camera settings, color profiles, composition, and sound., • Proficiency in Adobe Creative Cloud, including:, • Adobe Photoshop, • Adobe Lightroom, • Adobe Premiere Pro, • Adobe After Effects, • Working knowledge of Final Cut Pro is a plus., • Experience with studio lighting, off-camera flash, continuous lighting, and on-location lighting setups., • Drone Pilot certification is a plus. Creative Skills • Exceptional eye for composition, lighting, framing, color, movement, and visual storytelling., • Ability to create polished, premium imagery and video that aligns with a high-performance brand aesthetic., • Strong understanding of photography and video for digital marketing, eCommerce, social media, and paid advertising., • Ability to adapt visual style across product, lifestyle, athlete, editorial, and commercial content., • Strong understanding of current social media and digital content trends. Soft Skills • Highly detail-oriented with strong organizational and time-management skills., • Able to manage multiple projects and priorities in a fast-paced environment., • Collaborative, coachable, and receptive to creative feedback., • Comfortable working independently while also contributing to a team environment., • Able to work under tight deadlines without sacrificing quality., • Flexible and adaptable to changing project needs, shoot schedules, and priorities., • Strong communication and problem-solving skills. Experience & Requirements • 5+ years of professional photography and videography experience, preferably within a brand, agency, studio, or commercial environment., • Bachelor's degree in Photography, Film, Video Production, Digital Media, or a related field preferred., • Experience shooting technical products, performance apparel, sports, fitness, lifestyle, or streetwear is strongly preferred., • Experience photographing and filming athletes or active subjects is a plus., • Must possess a valid U.S. driver's license and passport with the ability to travel domestically and internationally., • Must be available to work full-time in a fast-paced, in-house creative environment., • Must be comfortable working both in a studio and on location. Additional Expectations • Ability to produce both photography and video assets from a single shoot, maximizing the value of each production., • Ability to work efficiently in a high-volume environment and deliver multiple assets on a regular basis., • Comfortable handling all aspects of a shoot, from equipment preparation and lighting to capture, editing, retouching, and final delivery., • Ability to maintain consistent visual standards across all photography and video content., • Stay current on emerging photography, video, editing, and AI technologies and identify opportunities to improve creative workflows., • Portfolio required. Website, photography portfolio, video reel, Instagram, or comparable work samples are acceptable.

Engineering Manager Location: Long Island, NY | Employment Type: Full-Time Work Schedule: On-site Monday–Friday initially; after 90 days, eligible to work remotely one day per week. Compensation: $140,000–$177,000, commensurate with experience Position Summary A technology-focused engineering organization is seeking an experienced Engineering Manager to lead a multidisciplinary engineering team supporting the development and production of high-performance electronic products. This role will oversee the transition of products from engineering development into production, with particular responsibility for RF and microwave test development, production test fixtures, validation, qualification, and technical documentation. The Engineering Manager will work closely with electrical engineering, mechanical engineering, CAD, project management, quality, assembly, and test teams to ensure products are developed, validated, documented, and released according to established timelines and quality requirements. The successful candidate will be both a strong technical contributor and an effective people leader who can manage multiple projects, establish priorities, resolve technical issues, and drive projects through completion. Key Responsibilities Engineering & Product Development • Lead engineering activities supporting the transition of products from development through production., • Oversee the design, development, and validation of electrical test boards and production test fixtures., • Develop test strategies, production test plans, and supporting technical documentation., • Work with engineering teams to verify functionality and performance using RF and microwave test equipment., • Support product qualification, validation, and production release activities., • Analyze production test data and identify opportunities to improve product performance, reliability, and manufacturability., • Ensure engineering deliverables are completed accurately and within established timelines. Test Development & Manufacturing Support • Develop test boards for evaluating electronic products in both component and packaged configurations., • Coordinate PCB design and formal drawing development with CAD resources., • Work with mechanical engineering teams on fixtures, base plates, and related components., • Coordinate with purchasing and project management to ensure required components and materials are available., • Develop assembly documentation and coordinate the build and testing of engineering hardware., • Translate engineering test solutions into production-ready test fixtures., • Develop and conduct gauge R&R studies to evaluate test fixture repeatability and reproducibility., • Create and maintain production test plans and related documentation. Cross-Functional Leadership • Collaborate with electrical, mechanical, CAD, project management, assembly, quality, and test teams., • Coordinate multiple projects with competing priorities and deadlines., • Provide technical direction and ensure engineering activities remain aligned with broader business objectives., • Identify technical, schedule, resource, and production issues and drive them toward resolution., • Maintain thorough engineering, qualification, validation, and production documentation. Team Leadership & Development • Lead and manage a multidisciplinary engineering team., • Supervise, mentor, and develop engineers and technicians., • Establish objectives, priorities, workload expectations, and performance goals., • Delegate assignments and provide technical and project guidance., • Monitor team performance and ensure projects remain focused and manageable., • Foster a collaborative, accountable, and continuous-improvement-oriented environment. Qualifications • Bachelor’s degree in Electrical Engineering required; Master’s degree preferred., • 7–10+ years of engineering experience, including experience supervising or managing a multidisciplinary engineering team., • Experience managing engineering activities throughout the product lifecycle, from development through production., • Strong understanding of RF and microwave testing and measurement., • Experience with RF test equipment such as network analyzers, power meters, spectrum analyzers, and related instrumentation., • Experience reviewing or working with PCB and mechanical drawings., • Proficiency with AutoCAD, SolidWorks, or comparable design tools., • Experience with circuit-level analysis software such as ADS, Microwave Office, or equivalent., • Experience with 3D electromagnetic simulation tools, such as HFSS, CST, or equivalent., • Strong statistical and analytical skills., • Experience with test fixture development, validation, or production testing., • Strong project management, organizational, and problem-solving abilities., • Excellent written and verbal communication skills., • Demonstrated ability to build strong working relationships across engineering and operational functions., • Experience in an ISO-certified and/or Lean manufacturing environment is a plus. Ideal Candidate The ideal candidate is a technically strong engineering leader who is comfortable moving between hands-on technical problem solving, project management, and team leadership. This individual should be: • Self-motivated and highly accountable., • Comfortable managing multiple projects simultaneously., • Strong at prioritization and deadline management., • Analytical and detail-oriented., • An effective communicator across technical and non-technical teams., • Collaborative, professional, and solutions-oriented., • Comfortable taking ownership and working independently. Additional Requirements • This is an on-site position during the initial 90-day period. Following 90 days, the position offers one remote workday per week., • Ability to occasionally travel, including overnight travel when necessary., • Ability to work effectively in a fast-paced engineering and manufacturing environment., • Commitment to established quality, safety, and operational standards. Compensation & Benefits Salary: $140,000–$177,000 annually, depending on experience. The organization offers a comprehensive benefits package that may include: • Medical, dental, and vision insurance, • 401(k) and profit-sharing programs, • Paid time off, • Disability and life insurance, • Wellness programs, • Commuter benefits, • Employee assistance and support programs, • Additional voluntary benefit programs We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. We strictly prohibit and do not tolerate discrimination against employees, applicants, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, sexual orientation, gender (including gender identity and expression), marital or familial status, age, physical or mental disability, perceived disability, citizenship status, service in the uniformed services, genetic information, height, weight, or any other characteristic protected under applicable federal, state, or local law. Applications from members of minority groups and women are encouraged.

Purity Products is a family-founded health and wellness company with more than 30 years in the supplement industry. As our DTC brands continue to grow, we're looking for an Ecommerce Landing Page Specialist to join our Growth team. If you enjoy building landing pages, experimenting with AI tools, studying what makes customers click and buy, and seeing the results of your work in real time, this could be a great fit. You'll work alongside our media buyer, creative team, Ecommerce Manager, and growth partners to turn campaign ideas and copy into engaging landing pages for our paid social campaigns. This is a hands-on role for someone who likes to build, test, learn, and move quickly. You'll typically take an approved brief and turn it into a live landing page within a day or two. And you don't need to be a software engineer. We're looking for someone who is comfortable using AI tools and landing page builders to get great work live quickly—and who has enough technical knowledge to recognize when something isn't working correctly. Location: Plainview, NY — Hybrid (3 days on-site/2 days remote) Employment Type: Full-Time Compensation: $70,000-$80,000 Based on Experience Benefits: Full benefits package (medical, dental, vision, life, AD&D, 401k) What You'll Be Doing • Build and launch landing pages for our ecommerce and paid social campaigns, • Use Replo and AI tools such as Claude Code, Codex, Cursor, or similar platforms to help build and update pages, • Turn approved copy and creative briefs into polished, mobile-friendly landing pages, • Build different types of pages, including product pages, advertorials, listicles, offer pages, and campaign-specific landing pages, • Partner with our Growth and Creative teams to make sure the landing page matches the ad and creates a consistent customer experience, • Bring your own ideas for page layouts, calls-to-action, product offers, social proof, and other elements that could improve conversion, • Research competitor and DTC landing pages to find new ideas and approaches worth testing, • Create variations of landing pages for new offers, audiences, and creative tests, • Set up and support A/B tests to learn which pages and offers perform best, • Review landing page performance and customer behavior to identify opportunities for improvement, • Use tools such as Microsoft Clarity or Hotjar to see how customers interact with pages and where they may be getting stuck, • Make sure products, offers, subscriptions, buttons, checkout links, and tracking are working correctly, • QA every page across mobile and desktop before it goes live, • Monitor live pages for errors, speed issues, or anything that could hurt the customer experience, • Keep projects and landing page updates organized in Asana, • Occasionally create or adapt simple page graphics using Canva or AI creative tools What We're Looking For • 1+ years of experience building landing pages, ideally for ecommerce, DTC, or paid social campaigns, • Hands-on experience with Shopify and landing page builders such as Replo, • Comfortable using AI tools such as Claude Code, Codex, Cursor, or similar platforms to help build and modify pages, • A good understanding of what makes a landing page effective—from the opening hook and page layout to offers, reviews, calls-to-action, and checkout, • Experience building pages designed to generate sales or conversions, not just look good, • Comfortable looking at performance data and using it to improve pages, • Familiarity with A/B testing and experimentation, • Comfortable working with Shopify products, variants, subscriptions, and checkout flows, • Some familiarity with HTML, CSS, and JavaScript so you can understand and make basic adjustments when needed, • Familiarity with website tracking, Meta Pixel, and UTMs is helpful, • Strong attention to detail, especially when checking pages before launch, • Comfortable working quickly and managing multiple pages or campaigns at once, • Someone who enjoys figuring things out, testing new tools, and continuously improving their work Nice to Have Even better if you have experience with: • DTC health, wellness, supplements, beauty, or consumer products, • Loop, Recharge, or other subscription platforms, • Intelligems, VWO, or other testing platforms, • Microsoft Clarity, Hotjar, or similar customer behavior tools, • Canva or AI creative tools, • Klaviyo, • Meta advertising and an understanding of how landing page performance impacts paid media results What We Offer • Performance bonus opportunity, • Medical, dental, vision, and 401(k), • Real ownership of a growing CRO program, • Multiple brands, meaningful traffic, and visible business impact, • A collaborative, supportive team environment Purity Products is an equal opportunity employer. We welcome applicants of all backgrounds and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Summary /Objective The Production Manager supports the production team in the management of the production stages of product lifecycle. Issue POs on a monthly cadence and monitor 100% on-time shipments. Manage monthly replenishment PO’s by analyzing sales and inventory reports. Proactively highlights delivery issues and partners with leadership on resolutions. Interfaces with sales, merchandising, design and operation teams. Knowledge of costing and lead-times. Position Responsibilities and Accountabilities: • Analysis and PO management: Analyze sales and inventory data to plan monthly replenishment POs., • Update cost and delivery dates on open POs and monitor the on-time shipment., • Vendor Communication: Drive daily production process through communication with global vendor base throughout the product life cycle. Communicate the forecast data to vendor to reserve production capacity., • Sample Management: Tracks PPS and TOP samples and communicate the schedule with internal partners., • Product Life Cycle Management: Uses AS400/ Spotfire/ Shopify/Repspark, • Build and maintain strong relationships with overseas factories, mills, and sourcing partners., • Conduct weekly production meetings and provide accurate status updates to leadership., • Identify potential production risks and proactively implement corrective action plans., • Ensure all garments meet company quality standards and customer requirements., • Partner with Quality Assurance to resolve manufacturing issues and implement corrective actions., • Review and approve production samples, TOP (Top of Production) samples, and shipment approvals., • Collaborate with Technical Design to ensure garments are produced according to approved specifications and fit standards., • Work closely with Product Development to facilitate a seamless transition from development into bulk production., • Coordinate with Logistics and Freight Forwarders to ensure timely shipping and customs compliance., • Monitor vendor performance, including on-time delivery, quality, and cost efficiency., • Assist in negotiating production costs while maintaining quality and delivery expectations., • Analyze production metrics, including delivery performance, quality rates, production efficiencies, and vendor scorecards., • Maintain accurate production reports, WIP (Work in Progress), and ERP system updates., • Ensure compliance with company policies, social compliance standards, and applicable regulations. Qualifications and Competencies: • Advanced Excel skills., • Excellent Math and data analysis skills., • Excellent communication and follow-up skills., • Organized with attention to detail, • Demonstrate a sense of urgency and flexibility in changing environment Education and Experience: • Bachelor’s Degree Preferable in Business, Operations & Supply Chain Management Will consider work experience., • 5 years’ experience in Production or procurement.

About Nav-Tech Nav-Tech Inc. is a growing manufacturer of engineered-to-order low- and medium-voltage switchgear, power distribution equipment, and custom electrical enclosures, serving contractors, utilities, and OEM customers across the New York metro area and across the USA. Nav-Tech is a division of Eleconnex, a private equity-backed electrical products platform, and is investing in its engineering organization to support a growing backlog of utility and commercial projects. Engineers at Nav-Tech own designs end to end — from customer specification through drawings, production support, and testing — rather than working on one narrow slice of a large product line. Position Summary We are seeking an Electrical Design Engineer with 5–10 years of experience designing low- and/or medium-voltage switchgear and power distribution equipment. The engineer will translate customer specifications into compliant, manufacturable switchgear designs; produce one-line diagrams, layout and fabrication drawings, and bills of material; select protective devices; and support production and testing through release. This is a hands-on design role in a fast-moving engineered-to-order shop, reporting to the Engineering Manager. Essential Duties and Responsibilities • Design low- and medium-voltage switchgear, switchboards, and power distribution assemblies to UL 891 and/or UL 1558, from customer specification to released drawing package, • Prepare one-line diagrams, three-line and control/wiring diagrams, equipment layouts, and bills of material, • Perform or review short-circuit, coordination, and load calculations; select and apply molded case and power circuit breakers, disconnects, metering transformers, and copper bus, • Ensure designs comply with NEC, NEMA, ANSI/IEEE, and applicable UL standards; support UL construction reviews and witness testing, • Use 2D/3D CAD to create models and drawings for customer projects, enclosures, and bus work, • Review customer specifications and submittals; respond to technical questions from customers, consulting engineers, and inspectors in coordination with the sales team, • Support production during build — resolve design questions on the floor, disposition non-conformances, and drive design changes that reduce cost or lead time, • Write and execute test protocols and final test reports for completed equipment, • Contribute to engineering standards, templates, and process discipline as the department grows Required Qualifications • Bachelor’s degree in Electrical Engineering or a related engineering discipline from an accredited university, • 5–10 years designing low- or medium-voltage switchgear, switchboards, or power distribution equipment, • Working knowledge of UL 891 and/or UL 1558, NEC, NEMA, and ANSI/IEEE standards, • Experience preparing one-line diagrams and performing short-circuit and protective device selection/coordination, • Proficiency in 2D/3D CAD (e.g., AutoCAD, AutoCAD Electrical, SolidWorks, or Inventor) and Microsoft Office, • Strong analytical and problem-solving skills; able to manage multiple projects in an engineered-to-order environment, • Clear written and verbal communication with customers, production, and management Preferred Qualifications • Experience at a switchgear or power equipment manufacturer such as Eaton, Schneider Electric, Siemens, ABB/Hitachi Energy, ASCO Power Technologies, Powell Industries, Myers Power Products, Vertiv, or similar, • Experience with power system analysis software (SKM, ETAP, or EasyPower), • Familiarity with sheet metal design, copper bus fabrication, and GD&T, • Experience supporting UL file maintenance, witness testing, or field labeling Schedule and Location Full-time, on-site at 155 Marcus Blvd, Hauppauge, NY 11788. Monday–Friday, 8:00 AM–5:00 PM. Relocation assistance is available for qualified candidates. Benefits Benefits include medical coverage, paid time off, and holidays.

Manufacturing Engineering Manager – Aerospace 📍 Location: Bay Shore, New York, United States SJ Mobilita is looking for an experienced Manufacturing Engineering Manager to join one of our premier aerospace manufacturing clients. This is an exciting leadership opportunity for an engineering professional who enjoys leading technical teams, improving manufacturing processes, solving complex production challenges, and driving operational excellence. Our client is a growing precision aerospace manufacturer focused on innovation, continuous improvement, quality, and delivering high-performance products that meet demanding aerospace industry standards. Position Summary The Manufacturing Engineering Manager will lead a team of Manufacturing Engineers responsible for developing and improving manufacturing processes, supporting production, and driving continuous improvement initiatives. The role will work closely with Engineering, Operations, Quality, Purchasing, Production, and Supply Chain teams to ensure efficient, cost-effective, and high-quality manufacturing operations. Key Responsibilities • Lead, mentor, and develop a team of Manufacturing Engineers., • Develop and maintain Bills of Materials (BOMs) and product structures., • Evaluate and improve manufacturing methods, workflows, and production processes., • Estimate production times, labor requirements, equipment needs, and manufacturing costs., • Create and maintain CAD models and manufacturing documentation using CATIA V5 or similar CAD software., • Generate engineering drawings and product structures that accurately reflect customer requirements., • Establish manufacturing tolerances, work instructions, and process documentation., • Provide engineering support and technical solutions to production teams and subcontractors., • Coordinate engineering priorities with Operations, Quality, Purchasing, and Production., • Lead Lean Manufacturing, Kaizen, and Continuous Improvement initiatives., • Identify and resolve manufacturing challenges through analytical problem-solving., • Drive improvements in productivity, quality, cost, and waste reduction., • Ensure compliance with company safety, quality, and manufacturing standards., • Support a culture of innovation, accountability, teamwork, and continuous improvement. Required Qualifications • Bachelor's degree in Engineering preferred; Associate's degree considered with relevant experience., • 5+ years of Manufacturing Engineering experience., • Previous leadership, supervisory, or team management experience., • Experience in aerospace or precision manufacturing environments., • Strong understanding of manufacturing processes, production planning, and engineering methods., • Strong analytical and problem-solving skills., • Excellent communication, leadership, and organizational abilities., • Ability to work effectively with cross-functional teams. Preferred Qualifications • Experience with CATIA V5 or similar CAD software., • Experience with Epicor ERP., • Hands-on experience implementing Lean Manufacturing and Kaizen., • Strong CAD, engineering drawing, and technical documentation skills., • Demonstrated Continuous Improvement mindset., • Experience working in a highly regulated or quality-driven manufacturing environment.

General Responsibilities:\n \n \nPerform a variety of inspections on materials, precision machined components and electrical-mechanical assemblies to ensure compliance with requirements. Use a wide assortment of measuring instruments including hand tools and gauges, vision system equipment. Prepare quality documentation for final shipments per customer requirements. \n \n Specific Duties:\n \n\n • Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as; profilometer, optical comparator, Keyence visual measurement system, height gauge, microscope, smart scope, etc.\n, • Perform incoming and receiving inspection to specified requirements.\n, • Perform inspection of finished details and assemblies to specified requirements.\n, • Enter inspection results into a variety of data collection tools and databases.\n, • Inspection of Soldered and brazed assemblies. Candidate requires internal certification for solder inspection.\n, • Keep accurate records and maintain quality documentation.\n, • Perform inventory movement transactions in the ERP system and ensure traceability of product.\n, • Understand the non-conforming material process to ensure control of material.\n, • Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner.\n, • Write clear material rejection reports that contain problem statements, dimensions, and data.\n, • Retrieve test data from databases and assemble documentation packages to ship with the product.\n, • Use of ERP System in order to retrieve quality requirements and perform tasks related to moving product in system.\n, • Perform tasks as assigned by the Inspection department Supervisor or Quality Manager.\n, • Support the Company Quality Policy\n, • Generate FAI documentation to supply to customers with shipments as needed.\n\n \n Qualifications:\n \n Required Skills\n \n\n • Ability to read, and use micrometers, calipers, heigh gage and other measuring instruments\n, • Ability to read, and understand engineering drawings and related technical documents\n, • Working knowledge of Geometric Dimensioning and Tolerance (GD&T) principles and their application\n, • Basic Statistical Process Control and Statistical Fundamentals\n, • Experienced with ERP systems\n, • Strong planning and organizational skills\n, • Detail oriented\n, • Good interpersonal skills\n, • Strong verbal and written communication skills\n, • Strong math skills\n, • Visual Acuity mandatory (ability to visually identify color variations and capsule / tablet irregularities)\n, • Flexible availability with regards to shift assignments when necessary\n, • Competent Microsoft Windows-Office and EXCEL applications\n\n Physical Requirements\n \n\n • Ability to lift, push or pull packages of up to 40 lbs.\n, • Ability to work standing for long periods.\n\n \n Desired Skills\n \n\n • Basic Statistical Process Control and Statistical Fundamentals\n, • Minimum 3 years in a precision manufacturing or machining environment\n, • Experience with computer software like; Statistical Software, Access, advanced Excel\n\n Education and Experience:\n \n\n • Minimum education is High School Diploma\n, • Associates or higher in Technical Discipline/Trade preferred\n, • Minimum 3 years in a precision manufacturing or machining environment\n\n \n \nCompensation: $20.00 - $30.00 per hour based on experience \n \n \nGW Lisk is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Full-time Description About Us eSimplicity is a modern digital services company that partners with government agencies to improve the lives and protect the well-being of all Americans, from veterans and service members to children, families, and seniors. Our engineers, designers, and strategists cut through complexity to create intuitive products and services that equip federal agencies with solutions to courageously transform today for a better tomorrow. Responsibilities: • Provide Tier 2 technical support for Salesforce-related issues, responding to and resolving incidents and service requests in accordance with established procedures and Service Level Agreements (SLAs)., • Triage, diagnose, troubleshoot, and resolve technical issues involving Salesforce applications, configurations, integrations, and customizations, escalating complex issues as appropriate., • Document troubleshooting activities, resolutions, user communications, and current ticket status in the applicable case management system., • Develop and maintain runbooks, knowledge articles, troubleshooting guides, training materials, and best-practice documentation for common issues and support procedures., • Collaborate with Salesforce developers, Product Owners, and other technical teams to investigate root causes, resolve complex issues, and communicate known issues and workarounds., • Administer Salesforce user access, roles, permissions, and related access requests in accordance with established security and access management procedures., • Participate in testing and validation of Salesforce features, enhancements, bug fixes, releases, and platform upgrades., • Communicate regularly with users regarding the status of support requests and follow through to resolution., • Identify recurring issues, trends, and opportunities to improve support processes, system usability, and the overall user experience., • Maintain accurate and complete records of support requests, resolutions, and user interactions to support operational reporting and continuous improvement., • Stay current with Salesforce releases, platform capabilities, and support best practices to provide informed technical support and recommendations., • Support the establishment, monitoring, and continuous improvement of SLAs and other help desk performance standards. Requirements • All candidates must pass public trust clearance through the U.S. Federal Government. This requires candidates to either be U.S. citizens or pass clearance through the Foreign National Government System which will require that candidates have lived within the United States for at least 3 out of the previous 5 years, have a valid and non-expired passport from their country of birth and appropriate VISA/work permit documentation., • A Bachelor's degree in computer science, information systems, engineering, business or other related field, • 4+ years of experience in technical support, application support, or platform support roles., • Experience supporting Salesforce applications in a technical support or administrator capacity., • Working knowledge of Salesforce platform features, including Lightning, APIs, and basic Apex concepts, with the ability to troubleshoot and escalate issues., • Experience providing Tier 2 or Tier 3 support in a help desk or ticketing environment., • Experience working with Jira and Confluence; familiarity with ServiceNow or similar systems., • Strong troubleshooting, customer service, and communication skills., • Experience creating user documentation and delivering training or knowledge transfer., • Ability to manage multiple support requests in a fast-paced environment. Desired Qualifications: • One or more Salesforce certifications, such as Salesforce Certified Administrator, Platform Developer I, Platform Developer II, or Platform App Builder., • Experience supporting Salesforce applications in a federal government environment., • Familiarity with IT service management (ITSM) practices, including incident management, problem management, and root cause analysis. Working Environment: eSimplicity supports a remote work environment operating within the Eastern time zone so we can work with and respond to our government clients. Expected hours are 9:00 AM to 5:00 PM Eastern unless otherwise directed by manager. Occasional travel for training and project meetings. It is estimated to be less than 5% per year. Benefits: eSimplicity offers a comprehensive benefits package, including medical, dental, and vision coverage, 401(k) retirement benefits, paid time off, paid holidays, life and disability insurance, and additional wellness and employee support programs. Eligibility may vary based on employment status and applicable plan terms. Reasonable Accommodation: eSimplicity is committed to providing reasonable accommodations to qualified individuals with disabilities during the application and hiring process. Applicants who need assistance or an accommodation should contact Human Resources. Equal Employment Opportunity: eSimplicity is an Equal Opportunity Employer, including disability and protected veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, disability, or any other legally protected status. Salary Description $84,700 - $94,500

The Sr. Systems Engineer, ProAV serves as a technical expert supporting NETGEAR's ProAV solutions across the South Central U.S. This role combines customer onboarding, field engineering, pre-sales support, and industry engagement. The ideal candidate brings deep expertise in AV-over-IP networking, strong troubleshooting capabilities, and the ability to deliver high-impact technical training and solution design. This is a remote-based position requiring up to 60% travel throughout the region. KEY RESPONSIBILITIES Customer Onboarding & Technical Training Lead onboarding for U.S. customers implementing NETGEAR ProAV switches and third-party integrations Collaborate with the South Central Sales Territory Manager to ensure successful deployments Deliver remote and on-site training covering AV-over-IP network design, switch profile selection, PTP configuration, Dante/AVB/Milan configuration, and API integration and video configuration Develop customized training materials, system designs, and internal/external knowledge base documentation Ensure successful transition into production environments, including complex multi-switch and multi-vendor deployments Professional Services & Field Engineering Provide advanced on-site troubleshooting for high-profile customers experiencing complex timing, multicast, or interoperability issues Capture logs, perform packet traces, replicate issues in lab environments, and provide real-time diagnostics Support commissioning of AV-over-IP systems to ensure stable production performance Resolve escalated issues involving AVB, Dante/AES67, NVX, Q-SYS, SMPTE-2059-2, PTPv2, and multicast networking Pre-Sales Engineering & Business Expansion Support Sales, Business Development, and Channel teams with technical scoping and solution design Conduct on-site and virtual product demonstrations Assist in Bill of Materials (BOM) creation and system architecture design Provide competitive analysis and technical positioning Contribute technical expertise to expand NETGEAR's ProAV presence in the U.S. market Internal Tools & Documentation Development Develop and maintain internal scripts, configuration tools, and deployment utilities Create automation tools to reduce troubleshooting time, including log analysis, profile validation, and configuration parsing Author best practice guides, training materials, and knowledge base documentation Industry Representation & Events Represent NETGEAR at U.S. industry conferences and partner events Deliver technical workshops and presentations Provide advanced AV-over-IP education and roadmap overviews Support event-based network deployments and multi-vendor interoperability demonstrations QUALIFICATIONS Minimum 5 years of experience in networking systems, AV-over-IP technologies, or related systems engineering roles Deep knowledge of ProAV networking products, AV-over-IP technologies, multicast networking and IGMP, and switch profile development Strong understanding of routing and switching fundamentals Hands-on deployment experience with AVB, Dante, Q-SYS, Crestron, SMPTE-2059-2, and multicast networks Field experience troubleshooting complex AV-over-IP systems Independent lab development and advanced technical self-study Preferred Qualifications Bachelor's degree preferred but not required Industry certifications such as CCNA, CWNA, AVIXA CTS, Dante, or AVB are beneficial but not required Experience working in a Solutions Architect or Systems Engineering capacity preferred Travel Requirements • Must be willing to travel up to 60% within the South Central U.S. region. Company Statement/Values: At NETGEAR, we are on a mission to unleash the full potential of connectivity with intelligent solutions that delight and protect. We turn ideas into innovative networking products that connect people, power businesses, and advance the way we live. We're a performance-driven, talented and connected team that's committed to delivering world-class products for our customers. As a company, we value our employees as the most essential building blocks of our success. And as teammates, we commit to taking our work to the Next Gear by living our values: we Dare to Transform the future, Connect and Delight our customers, Communicate Courageously with each other and collaborate to Win It Together. You’ll find our values woven through our processes, present in our decisions, and celebrated throughout our culture. We strive to attract top talent and create a great workplace where people feel engaged, inspired, challenged, proud and respected. If you are creative, forward-thinking, passionate about technology and are looking for a rewarding career to make an impact, then you've got what it takes to succeed at NETGEAR. Join our network and help us shape the future of connectivity. NETGEAR hires based on merit. All qualified applicants will receive equal consideration for employment. All your information will be kept confidential according to EEO guidelines.

Job Description Position Summary The Maintenance Technician III is a senior-level, hands-on maintenance professional responsible for diagnosing, repairing, and maintaining manufacturing equipment, utilities, and facility systems to ensure safe, reliable, and compliant operations. This role serves as a technical expert and escalation point for complex mechanical, electrical, and controls issues, while supporting preventive maintenance execution and reliability improvements across the site. With a strong commitment to Grandma Quality, the Maintenance Technician III demonstrates pride in workmanship, accountability, and leadership by example. This role partners closely with Operations, FSQA, Sanitation, and Reliability to minimize downtime, support food safety, and ensure equipment and facility systems are production-ready at all times. Technician III – Food Manufacturing Maintenance Department: Maintenance Reports To: Maintenance Manager Location: Crown and T&L Facilities Shift: Day Shift Position Summary We are looking for a highly skilled and experienced Technician III to join our Maintenance team in a fast-paced food manufacturing environment. The ideal candidate will be a strong multi-skilled maintenance technician who can independently troubleshoot, repair, and maintain industrial production equipment and facility systems. This position requires strong electrical and mechanical troubleshooting skills, experience with heating and cooling systems, welding/fabrication abilities, and the ability to communicate effectively with production teams and management. The Technician III must be able to diagnose problems, determine the appropriate repair, document work, and help maintain an effective preventive maintenance program. Key Responsibilities Electrical & Controls • Troubleshoot and repair 480V/240V/120V electrical systems and industrial equipment., • Read and interpret electrical schematics, wiring diagrams, control drawings, and equipment manuals., • Troubleshoot motors, starters, contactors, relays, sensors, switches, solenoids, VFDs, and control circuits., • Diagnose electrical faults using meters and other appropriate test equipment., • Troubleshoot PLC-controlled equipment and work with controls/automation personnel or outside vendors when required., • Perform electrical repairs safely and according to company procedures. Mechanical & Equipment Maintenance • Troubleshoot, repair, and maintain industrial food-processing and packaging equipment., • Work with conveyors, pumps, gearboxes, bearings, belts, chains, motors, valves, pneumatic systems, and hydraulic systems., • Perform equipment installations, modifications, adjustments, and rebuilds., • Diagnose equipment failures and identify the root cause of recurring problems., • Minimize equipment downtime while maintaining safety and product-quality standards. Welding & Fabrication • Perform MIG/TIG/stick welding and general metal fabrication as required., • Repair and fabricate equipment guards, brackets, frames, platforms, supports, and other components., • Safely use grinders, drills, saws, and other shop tools. Heating, Cooling & Utilities • Troubleshoot and perform maintenance on heating, refrigeration, HVAC, cooling, and facility systems., • Troubleshoot gas-fired equipment, ovens, burners, heating systems, pumps, fans, and related components., • Work with refrigeration/HVAC contractors when specialized repairs or service are required., • Understand basic operation and troubleshooting of compressed air, water, steam, gas, and other facility utilities. Communication & Teamwork • Communicate clearly and professionally with Maintenance, Production, Quality, Sanitation, Safety, and Management., • Provide accurate updates regarding equipment status, repairs, and downtime., • Train and assist other maintenance technicians when needed., • Take ownership of problems and follow repairs through to completion., • Work independently while also being an effective member of the Maintenance team. Required Qualifications • 5+ years of industrial maintenance experience, preferably in a food manufacturing or similar production environment., • Strong electrical troubleshooting experience., • Ability to read and understand electrical schematics and wiring diagrams., • Strong mechanical troubleshooting and repair skills., • Welding and fabrication experience., • Experience with heating, cooling, HVAC, refrigeration, or industrial utility systems., • Experience troubleshooting motors, pumps, conveyors, pneumatic and hydraulic systems., • Ability to communicate clearly and professionally with employees and contractors., • Ability to diagnose problems independently and determine the appropriate course of action., • Ability to work in a fast-paced manufacturing environment., • Ability to work safely around industrial machinery, electrical systems, chemicals, heat, cold, and food-processing equipment. Preferred Qualifications • Food manufacturing experience., • Experience with packaging equipment and automated production machinery., • PLC troubleshooting experience., • VFD troubleshooting and programming experience., • Experience with 480V three-phase electrical systems., • Experience with industrial refrigeration and/or HVAC., • Experience with natural gas systems and gas-fired equipment., • Experience with compressed air, or other industrial utilities., • OSHA, electrical, welding, HVAC, or other relevant technical certifications. Physical Requirements • Ability to stand, walk, bend, kneel, climb, and work in confined or difficult-to-access areas., • Ability to lift and move maintenance parts and equipment as required., • Ability to work in hot, cold, wet, and noisy manufacturing environments., • Ability to work safely at heights when required., • Ability to work flexible hours, weekends, overtime, and respond to equipment emergencies when necessary. What We Are Looking For The ideal candidate is more than a repair technician. We are looking for someone who can take ownership of a problem from beginning to end: Identify the problem → Troubleshoot → Determine the repair → Obtain parts → Complete the repair → Document the work → Follow up to prevent the problem from returning. The successful candidate will be a hands-on, highly skilled, dependable, safety-minded technician who can work independently, communicate effectively, and help keep our production operation running safely and efficiently.

Job Title: Senior Finance & Operations Systems Engineer Location: Remote in New York City, Boston, or the DC metro areas Position: Full-Time Direct Hire ️ Join an Industry-Leading Organization TalentFish is casting a line for a Senior Finance & Operations Systems Engineer for our premier global client. Candidates must reside near New York City, Boston, or Washington, DC metro areas. We are seeking a dynamic, high-performing individual who demonstrates a strong aptitude for learning new technologies. Overview: The Senior Finance & Operations Systems Engineer is responsible for the day-to-day management and support of various enterprise solutions in close collaboration with other IT teams. Serving as the primary point of contact for technical issues, this role partners with business users to ensure system health, stability, and ongoing improvement. What You Will Do • Support and drive forward enterprise applications and platforms such as EIS, Intapp Time,, • Emburse, eBillingHub, Elite 3E, including Design Gallery, Proforma, Star Collect, Client Travel, and OfficeSpace., • Lead application implementations, upgrades, enhancements, troubleshooting, and roadmaps., • Develop in 3E IDE and Design Gallery., • Conduct development activities, including analysis and solution design, along with hands-on development across application layers., • Direct oversight and management of various solutions as assigned., • Act as subject matter expert for those systems and provide technical support as needed. Ensure the health and stability of all solutions owned., • Monitor, track, and report on performance and capacity. Responsible for capacity planning., • Under the direction of the Senior Manager, Enterprise Applications, engage with the business as needed in supporting the above., • Work with the relevant IT teams in developing and delivering enhancements and new capabilities., • Drive and manage those efforts., • Deliver recommendations to the business and IT leadership based on an understanding of the platform, roadmap, and related business drivers., • Maintain current and accurate architecture and support documentation for use by both engineering teams and support staff., • Adhere to and participate in the Firm's Change Management process., • Provide regular updates and reporting to both the Senior Manager, Enterprise Applications, and the Director of Applications., • Collaborates in the creation and use of training and QA materials and activities for applications supported., • Provides coaching to junior analysts on troubleshooting and best practices., • Know common legal enterprise solutions. Advanced knowledge of enterprise applications on-premises, in the cloud, and hybrid., • Work with product vendors and procurement., • Possess strong communication, organization, negotiation, critical thinking, and leadership skills as well as exceptional customer service and collaboration abilities; and Work with QA on test scripts, procedures, and remediation. What You Will Bring Qualifications • Bachelor's degree in Computer Science, Engineering, Information Systems, or related preferred, or equivalent work experience., • Working knowledge of legal technology solutions preferred., • 7 + years of general IT and systems work., • 5 + years' experience supporting Elite 3E or Aderant, preferably in a professional services or legal industry environment. Experience and Proficiencies • Advanced 3E or Aderant support., • Advanced knowledge of Elite 3E accounting/billing systems., • Knowledge of multi-tier architecture, including servers, databases, proxies, load balancing, trust/access rights, certificates, and integrations., • Knowledge of Windows Server, including IIS, services, scheduled tasks, logging, and configurations., • Knowledge of SQL Server, SQL development/queries, and reporting tools, especially Power BI., • Intermediate knowledge of system integrations, including APIs, web services, FTP, and database-to-database., • Ability to work with project management on plans, tasks, and resource management and tools such as Confluence and JIRA., • Familiarity with security best practices and procedures., • Familiarity with data governance best practices and procedures; and, • Familiarity with related IT departments such as infrastructure, desktop, service desk, development, operations, and telecommunications., • Possesses excellent communication skills, with the ability to work independently and drive the successful delivery of innovative solutions to the business., • Highly organized, accountable, and demonstrate a strong commitment to delivering client service excellence. Compensation and Employment This role requires authorization to work in the U.S. without current or future visa sponsorship. The expected salary range for this position is $135,000 - $190,000 per year, depending on experience, qualifications, and location. This role is eligible for bonuses based on individual contributions and firm profitability. Full-Time employees receive full comprehensive benefits such as Medical, Dental, Vision, Life, Disability, 401K, and more! TalentFish is committed to pay transparency and equal opportunity. The salary range provided complies with applicable state and federal regulations. All offers are contingent upon the completion of a background check, which may include, but is not limited t,o reference checks, education verification, employment verification, drug testing, criminal records checks, and any required certifications or compliance requirements based on the end client's background check policies and applicable laws. About TalentFish TalentFish is an employee-owned company pioneering a new realm in talent acquisition. We are redefining IT staffing by evolving AI, video screening, and our unique platform. TalentFish focuses on providing the best employee, consultant, and client experience possible. At TalentFish, we are an Equal Opportunity Employer; we embrace and encourage diversity.

Nav-Tech Inc. | Hauppauge, NY (on-site) | Full-time | Relocation assistance available \n \n About Nav-Tech Nav-Tech Inc. is a growing manufacturer of engineered-to-order low- and medium-voltage switchgear, power distribution equipment, and custom electrical enclosures, serving contractors, utilities, and OEM customers across the New York metro area and across the USA. Nav-Tech is a division of Eleconnex, a private equity-backed electrical products platform, and is investing in its engineering organization to support a growing backlog of utility and commercial projects. Engineers at Nav-Tech own designs end to end — from customer specification through drawings, production support, and testing — rather than working on one narrow slice of a large product line. \n \n Position Summary \n We are seeking an Electrical Design Engineer with 5–10 years of experience designing low- and/or medium-voltage switchgear and power distribution equipment. The engineer will translate customer specifications into compliant, manufacturable switchgear designs; produce one-line diagrams, layout and fabrication drawings, and bills of material; select protective devices; and support production and testing through release. This is a hands-on design role in a fast-moving engineered-to-order shop, reporting to the Engineering Manager. \n \n Essential Duties and Responsibilities \n • Design low- and medium-voltage switchgear, switchboards, and power distribution assemblies to UL 891 and/or UL 1558, from customer specification to released drawing package \n • Prepare one-line diagrams, three-line and control/wiring diagrams, equipment layouts, and bills of material \n • Perform or review short-circuit, coordination, and load calculations; select and apply molded case and power circuit breakers, disconnects, metering transformers, and copper bus \n • Ensure designs comply with NEC, NEMA, ANSI/IEEE, and applicable UL standards; support UL construction reviews and witness testing \n • Use 2D/3D CAD to create models and drawings for customer projects, enclosures, and bus work \n • Review customer specifications and submittals; respond to technical questions from customers, consulting engineers, and inspectors in coordination with the sales team \n • Support production during build — resolve design questions on the floor, disposition non conformances, and drive design changes that reduce cost or lead time • Write and execute test protocols and final test reports for completed equipment \n • Contribute to engineering standards, templates, and process discipline as the department grows Required Qualifications \n • Bachelor’s degree in Electrical Engineering or a related engineering discipline from an accredited university \n • 5–10 years designing low- or medium-voltage switchgear, switchboards, or power distribution equipment \n • Working knowledge of UL 891 and/or UL 1558, NEC, NEMA, and ANSI/IEEE standards • Experience preparing one-line diagrams and performing short-circuit and protective device selection/coordination \n • Proficiency in 2D/3D CAD (e.g., AutoCAD, AutoCAD Electrical, SolidWorks, or Inventor) and Microsoft Office \n • Strong analytical and problem-solving skills; able to manage multiple projects in an engineered-to order environment \n • Clear written and verbal communication with customers, production, and management Preferred Qualifications \n • Experience at a switchgear or power equipment manufacturer such as Eaton, Schneider Electric, Siemens, ABB/Hitachi Energy, ASCO Power Technologies, Powell Industries, Myers Power Products, Vertiv, or similar \n • Experience with power system analysis software (SKM, ETAP, or EasyPower) \n • Familiarity with sheet metal design, copper bus fabrication, and GD&T \n • Experience supporting UL file maintenance, witness testing, or field labeling \n \n Schedule and Location \n Full-time, on-site at 155 Marcus Blvd, Hauppauge, NY 11788. \n Monday–Friday, 8:00 AM–5:00 PM. \n Relocation assistance is available for qualified candidates. \n Benefits Benefits include medical coverage, paid time off, and holidays. \n \n Salary Range \n $100k-$115k

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO: Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! Position Summary The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction and Forestry Machinery, Compact Construction Equipment, and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. Key Responsibility Areas (KRA) • Track construction bid results to identify opportunities with existing accounts and prospects., • Determine customer needs and select applicable equipment configurations to meet customers’ technical requirements and applications., • Perform trade evaluations on new quote opportunities., • Perform price calculations and generate customer quotations., • Write bid specifications that favor John Deere and Allied Products, • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services., • Perform Operation & Maintenance training on new equipment deliveries., • Attend and participate in trade shows, conferences and other industry related networking events., • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles., • Maintain records of customer communications, personal visitations and opportunities in the company CRM system., • Communicate any client information that may affect company decisions to appropriate department personnel as needed., • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes., • Maintain knowledge of competitor’s products and identify and report intelligence on competitors pricing or marketing strategies to management and peers., • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals., • Maintain current knowledge of JESCO products., • Understand and comply with established guidelines that ensure a safe and healthy work environment., • PERFORM other related duties as assigned. Performance Measures • New and Used Equipment Sales, • Rental Revenue, • Gross Profit Margin Achieved, • Market Share, • Number of New Accounts, • Call Frequency Achievement, • Trade Appraisal Detail & Accuracy, • Conflict Resolution, • Product & Selling Skills Learning, • Timely and Accurate Sales Reporting Requirements: Knowledge and Skill Requirements • Bachelor’s degree., • Five years of proven outside sales experience., • Knowledge of construction and/or industrial equipment operation and applications., • Strong interpersonal and oral communication skills., • Strong presentation skills and professional appearance., • Excellent planning and organizational skills., • Strong written communication skills with exceptional presentation, negotiation and business acumen., • Proficiency in Microsoft Office products and CRM systems., • High energy, excellent self-motivation and work ethic. Physical Requirements • Candidates are expected to occasionally operate, demonstrate, climb up and down and walk around the equipment in order to sell to customers., • Candidates should have the physical ability to evaluate equipment for trade. This includes climbing on the equipment and operating the equipment., • Candidates will be expected to drive a vehicle and cover a particular assigned territory. Driving in a vehicle may be up to 80% of their day., • Candidates must be able to travel by air to attend any Sales related or professional development events or as required by the company., • Candidates should be able to complete at least six to ten effective customer visits per day., • Candidates should be able to lift and carry 50 pounds., • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments in order to meet with customers on jobsites., • Valid Driver’s License - must meet insurance underwriting requirement #ZR

Job DescriptionDescription: Position Summary: The Manager of Equipment Maintenance is responsible for supporting assigned production divisions to ensure equipment, documentation, plant, and support systems are repaired, maintained, up to date, and in good working order. Day and Night shift opportunities available. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Develop, execute, and manage equipment maintenance department to meet all requirements and yield a greater than 90% first time right., • Communicate daily with cross-functional department directors and managers., • Troubleshoot and resolve complex equipment issues, driving root cause analysis., • Maintain and process paperwork (internal PO and Vendors) for Accounts Payable., • Evaluate and monitor spare parts to minimize downtime. Monitor and maintain spare parts database, submit requisition for equipment and parts as needed., • Manage relationships with cross-functional teams to install, rebuild, or replace production equipment., • Manage plant maintenance support personnel., • Ensure that technical staff are adequately trained, equipped, and motivated so that technical work can be accomplished in a safe, timely, and cost-effective manner., • Review the operation of plant equipment and systems constantly to minimize unplanned downtime, anticipate and solve problems in a timely manner, and identify opportunities for improvement., • Initiate and carry out projects that improve efficiency and/or reduce operating costs., • Track, analyze and improve key maintenance parameters such as asset utilization, maintenance cost, PM compliance, schedule compliance, etc., • Interface with all equipment monitoring, CMMS, BMS and production/project management software, to plan work activities, and develop interdepartmental feedback, ensuring proper record keeping for maintenance activities., • Perform center lining and 5S work to production lines, product contact parts, and change parts., • Maintain safety, health, and environmental policies and procedures., • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect, and accountability., • Other responsibilities as assigned by senior management. Education and Experience: • High school or GED diploma required., • Bachelor’s degree in mechanical engineering, Industrial Maintenance, or related field, or equivalent experience., • 5 years of experience in mechanics and electrical, preferably in a pharmaceutical manufacturing setting; at least 1 year in supervisory or management role. Skills, Knowledge, and Abilities: • Proven leadership experience, with the ability to supervise and motivate a team., • Knowledge of safety regulations, compliance standards, and risk assessment procedures., • Expert knowledge of production equipment and facility’s support systems., • Excellent problem-solving, organizational, and communication skills., • Proficiency in maintenance management software (e.g., CMMS) and Microsoft Office Suite., • Proficient with test equipment, data managing leading to databased decision making., • Strong mathematical/analytical aptitude., • Willingness to lead by example, fostering a shared culture of efficiency with importance on meeting project commitments with on-time completion., • Ability to prioritize and multitask. Physical Demands: • Required to use hands to handle or feel objects, equipment, tools, computer controls and operational machinery., • May be required to lift and/or move up to 50 lbs., stand, bend, kneel, crouch, sit, talk, hear, and walk for a long period., • Specific vision abilities required include close vision, ability to focus. Work Environment: • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Required to be present in the office to collaborate with executive management, department directors, peers, and supervisors on an as needed basis., • Regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role., • Employee travel/work hours/schedule/location and/or shift are subject to change based on business needs and Management discretion., • Regularly exposed to noise, dust and vibrations in a manufacturing environment; PPE may be required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel. Supervisory Responsibilities: • Manage union and nonunion personnel Personal Protective Equipment or Attire Required for Position: • As needed. Pay Range: $80,000 - $100,000 per year

Job DescriptionDescription: Position Summary: The Administrative Assistant is responsible for assisting the QC Manager in one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, ICP, Technical Support) with any tasks including, but not limited to, maintenance of laboratory documentation, initiation of laboratory change controls, and direct communication and coordination between all internal departments. Responsibilities: Responsibilities include, but are not limited to: • Preparation and review of the certificate of analysis (CofA) for all materials tested. Includes review of testing results reported and manufacturing batch records, as required., • Communicate and provide information to other departments, as requested., • Coordinate with the Regulatory Affairs group to maintain and update specifications as required based on regulation requirements and changes., • Manage and support the laboratory by initiating change controls, drafting revisions to QC documentation (specifications, test methods, SOPs, etc.), and completing action items within the electronic quality management system., • Maintain current and retired QC documents., • Maintain spreadsheets for tracking departmental metrics, laboratory performance, and material release., • Monitor and maintain proper inventory levels of all laboratory supplies and reagents by working with the laboratory and purchasing groups., • Interact with all outside contract laboratories used for testing of samples., • Assist with and coordinate distribution of documents, procedures, instructions, and training., • May be required to assist in performing basic related tests, as needed., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Associate’s degree preferred; equivalent years’ work experience is acceptable. Skills, Knowledge, and Abilities: • Proficiency in Microsoft Word, Excel, graphs/charts and databases., • Ability to multitask and meet tight deadlines., • Excellent organizational and follow-up skills with attention to detail., • Ability to communicate effectively. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs. Pay Range: $21 per hour

Job Description Regional Sales Manager iNRCORE Group is a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data Center, and HiRel industrial markets. iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our talented staff is what makes this all possible. We currently have an opening for a Regional Sales Manager for our Passive Plus Inc., located in Hauppauge, NY. This role serves as the primary commercial leader for the assigned territory, responsible for driving revenue growth, expanding customer relationships, and strengthening our presence across key markets. The ideal candidate is strategic, relationship-focused, and skilled at building pipelines and closing opportunities across both direct and channel sales models. PPI is a fast growing & dynamic company. We have an excellent reputation in the industry. We specialize in Hi Q passive components, such as HI Q RF capacitors, and Broadband capacitors. We serve markets such as Defense, MRI, Industrial, AI data centers-telecom, Semiconductor, Instrumentation. We are looking for someone with 5-15 years sales experience in electronic components, and someone who is hungry and willing to learn. Competitive base salary, with significant bonus potential. Job Summary The Regional Sales Manager is accountable for the commercial performance of the territory, including revenue growth, opportunity development, account management, and channel support. This role executes sales strategies, manages manufacturer representatives, collaborates with distribution partners, and maintains strong engagement with customer stakeholders. Work is performed with a high level of independence and requires strong communication, planning, and business development capabilities. Key Responsibilities Territory Revenue Ownership · Own all bookings, revenue generation, and commercial results within the assigned territory. · Develop and implement territory growth strategies that align with corporate objectives. · Maintain a strong pipeline of opportunities across target markets. · Identify and pursue new program and business opportunities requiring company products. Strategic Account Management · Build and maintain strong relationships with key customers, engineering groups, and procurement teams. · Support design-in opportunities, product qualification efforts, and long-term program development. · Develop strategic account plans and monitor performance against goals. · Engage both new and existing customers to expand the company’s footprint. Third-Party Representative Management · Oversee the performance of manufacturer representatives in the territory. · Provide guidance on target accounts, opportunity priorities, and product focus areas. · Conduct regular business reviews to ensure alignment with company objectives. · Ensure representatives are trained and equipped with current product knowledge and sales messaging. Distribution Channel Development · Partner with internal teams to strengthen distributor relationships. · Identify opportunities to increase distributor engagement and revenue contributions. · Support distributor-driven design opportunities and program placements. · Align distribution strategies for maximum market penetration. Customer Engagement & Market Development · Maintain consistent communication with customer stakeholders to understand requirements and upcoming program needs. · Identify emerging applications where company technologies provide value. · Represent the company at customer meetings, program reviews, and industry events. Sales Operations & Internal Coordination · Collaborate with customer service and internal teams to ensure efficient quoting, order management, and communication. · Maintain accurate sales forecasts and territory pipeline visibility. · Provide regular updates regarding opportunities, customer activity, and market conditions. Required Qualifications · Bachelor’s degree in Business, Engineering, or related field, or equivalent experience. · Experience in sales, account management, or business development. · Strong communication, negotiation, and relationship-building skills. · Ability to manage multiple priorities and work independently. Preferred Qualifications · Experience in electronics, manufacturing, or technical sales. · Experience managing manufacturer reps and/or distribution partners. Knowledge / Skills / Abilities · Strong understanding of sales processes and territory management. · Ability to communicate technical value propositions to customers. · Strong organizational, forecasting, and CRM proficiency.

Job DescriptionDescription: Position Summary The Senior Chemist is responsible for and has an advanced level of experience in performing chemical analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, and documenting results in accordance with SOPs. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Perform laboratory chemical analysis on raw materials, in-process materials, and/or finished product, using ICP-OES/MS, UV-Vis, Fluorescence, GC, HPLC/UPLC, titration, and other wet chemistry techniques, as assigned, in accordance with the prescribed approved analytical test method., • Execute assay testing, content uniformity testing, impurities analysis, validation testing (method, cleaning, process), and process/interpret data at an advanced level with minimal to no errors., • Maintain clean and organized laboratory working environment., • Disposes of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Perform and assist in laboratory investigations., • Perform and assist in Cleaning, Method and Process validation testing and protocol/report review., • Maintain and troubleshoot laboratory equipment at an advanced level., • Suggest improvements to existing testing methods when possible., • Mentor and train entry-level and mid-level personnel on techniques performed in the lab and assist with laboratory related questions as needed., • Assist with routine Metrology functions, including instrument cleaning/ preventive maintenance/ calibration/ verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management. Education and Experience: • Bachelor’s degree in a science related field., • At least 8 years of work experience in a laboratory setting preferred. Skills, Knowledge, and Abilities: • Proficient in laboratory chemistry and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Advanced level experience in HPLC/UPLC, ICP, Dissolution, IR, UV/VIS, and wet chemistry testing., • Advanced level experienced with analytical laboratory software., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail., • Able to effectively present results., • Able to independently perform testing on all methods and troubleshoot most method issues with little or no help., • Able to independently troubleshoot complex instrument issues with little or no help. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: · None Personal Protective Equipment or Attire Required for Position: · Gowning as required by GMPs and/or SOPs. Pay Range: $90,000 - $100,000 per year

Job DescriptionDescription: Position Summary: The Chemist II is responsible for and has a moderate level of experience in performing chemical analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, and documenting results in accordance with SOPs. Responsibilities: Responsibilities include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Perform laboratory chemical analysis on raw materials, in-process materials, and/or finished product, using ICP-OES/MS, UV-Vis, Fluorescence, GC, HPLC/UPLC, titration, and other wet chemistry techniques, as assigned, in accordance with the prescribed approved analytical test method., • Execute assay testing, content uniformity testing, impurities analysis, method transfers, cleaning validation testing, and process/interpret data at a moderate level with minimal to no errors., • Maintain a clean and organized laboratory working environment., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Assist in laboratory investigations, as assigned., • Assist in Process validation testing and protocol/report review, as assigned., • Maintain and troubleshoot laboratory equipment at a moderate level., • Suggest improvements to existing testing methods when possible., • Assist with routine Metrology functions, including instrument cleaning/ preventive maintenance/ calibration/ verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Bachelor’s degree in a science related field., • Between 4 - 8 years of work experience in a laboratory setting preferred. Skills, Knowledge, and Abilities: • Knowledge of laboratory chemistry and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Proficient in HPLC/UPLC, ICP, Dissolution, IR, UV/VIS, and wet chemistry testing., • Proficient with analytical laboratory software., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail., • Able to effectively present results., • Able to perform testing on moderate level methods and troubleshoot moderate method issues. May require some guidance/supervision as needed., • Able to troubleshoot moderate instrument issues independently, and complex instrument issues under supervision. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs. Pay Range: • $75,000 - $89,999 per year

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time The Quality Associate Manager is a key member of the site leadership team and is responsible for planning, developing, and directing the quality team, policies, programs and initiatives. They will establish and manage metrics to ensure that products meet customer specifications and are consistent with the quality standards of the Company. In addition, this individual will be responsible for the development and implementation of strategic plans and improvement initiatives targeting reliability, supplier quality and cost of poor quality. This role will be a single point of accountability for Quality for the division. Essential Functions: • Manage and maintain the AS9100 QMS certification., • Ensure total product integrity by providing leadership in establishing a common quality vision, a positive culture & structure and in continually improving processes., • Lead and develop a team of Quality Engineers and Inspection Supervisor, overseeing both incoming material inspection and manufacturing (in-process/final) inspection functions, ensuring consistent application of quality standards across all inspection points., • Provide clear direction, coaching, and performance management to build technical capability and drive accountability within the quality organization., • Mentor and grow team members' skills, fostering a culture of continuous improvement and professional development. Develop, implement and monitor all key quality metrics, systems, and procedures., • Defines quality objectives and functional responsibilities., • Develop and implement strategies to increase performance against identified KPI’s, reduce the cost of poor Quality, and improve product performance., • Contributes to the quality improvement efforts of the company by following a structured continuous improvement approach and focusing on root cause identification and correction., • Oversees customer and supplier quality audit programs. Ensure that the audit programs are maintained as required by internal/external policies and procedures., • Manage customer score cards and warranty returns while actively interfacing with customers, inside sales, product line management, and engineering on quality issues, specifications and agreements for positive customer satisfaction., • Stimulates cooperation between teams to enable issue resolution., • Work with both suppliers and customers to ensure the highest level of quality throughout the value stream., • Team with the Supply Chain organization to develop, implement, and manage supplier metrics., • Contributes to the achievement of company objectives by playing an active role in the strategic planning process including the development of quality targets for continuous quality improvement., • Manage the quality organization's budget, in support of meeting the company’s financial commitments., • Ability to interface with and effectively communicate with a broad range of customers, cross functional teams, as well as executive management. Qualifications: • Bachelor’s degree in engineering or closely related field with a minimum of 6 years of relevant professional experience or a Graduate degree with a minimum of 4 years relevant experience, in electronics manufacturing environment preferably in the Aerospace and Defense industry., • Experience working in a defense/microelectronics manufacturing environment, with familiarity in applicable quality standards and requirements (e.g., AS9100, ITAR, MIL-SPEC)., • Professional communication and presence., • Proven ability to effectively contribute to the quality improvement efforts of the company., • Six Sigma / Lean experience preferred. Preferred Additional Skills: • Must be able to obtain and maintain a DoD Secret security level clearance. Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionDescription: About GenServe: GenServe is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales, primarily serving commercial customers. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions. Job Description: Responsible for providing Professional Technical Services for Genserve Inc. customers including technical site analysis to resolve customer issues and to perform remedial maintenance & repair duties on various make and models of UPS Systems from 1 -1000 kVA. Systems will include a complete range of single-phase, 3-phase UPS Systems, Switch Gear, Battery Plants, DC Plants, STS, PDU’s & Emergency Lighting Inverters and associated peripherals. Fundamental knowledge of electrical distribution systems, basic test and measurement equipment, fundamental knowledge of electrical code and IEEE requirements, and in-depth knowledge of electronic principles is required. A high level of customer service skills is required as well as the ability to travel regionally. On an “as needed” basis. Essential Responsibilities: • Perform Startup/Commissioning on UPS/Critical Power equipment across various product lines both single module and multi- module systems., • Perform Preventive Maintenance on various makes and models of single module and multi-module systems., • Perform Unscheduled Maintenance and repairs on various makes and models of UPS/Critical Power Systems on single module and multi-module systems up to 1000 kVA., • Perform basic Power Audits of customer’s distribution systems., • Document all required information for each site visit performed on the UPS/Critical Power Systems listed in the Job Description as well as DC/Battery Plants., • Work with other team members to complete custom and large installation projects., • Be prepared to always respond promptly and professionally to emergency calls including holidays and weekends., • Work with the OEMs for UPS/Critical Power Systems Software upgrades and other OEM required repairs., • Stay current in all aspects of revisions, updates, and new additions to UPS/Critical Power Systems of different make and models., • Perform site visits, technical evaluations, complete Critical Action Reports, Status Reports and Field Service Reports., • Assist in Warranty Contract Sales as required., • Maintain integrity of site information and report description to the UPS Supervisor & UPS Service Manager., • Train other Field Service Engineers on product knowledge when required, • Properly document, label, and return all defective parts utilized in the repair of UPS System equipment to the designated disposal/repair location., • Educate Genserve Inc. Power Inc. customers on basic operation of their equipment. Inform customers of issues which they may have experienced with their equipment in a way which is beneficial to the customer as well as Genserve Inc. Power Inc., • Perform other duties as assigned and attend customer meetings at the UPS Service Directors request.Requirements: Required Skills: • High level of technical knowledge of electronic/electrical component theory., • Must be able to perform duties with general direction, receiving only general guidance with respect to overall objectives. Work is usually quite independent of other team members, • Must operate within division policy guidelines using independent judgment in achieving assigned objectives, • Must comply with all safety policies, practices and procedures, • Participate in proactive team efforts to achieve departmental and company goals, • Ability to read, analyze, and interpret Electrical Single Lines, general business procedures, professional documents, technical procedures, engineering blueprints, and governmental regulations. Ability to write Service, • Reports, and procedures. Ability to effectively present information and respond to questions from groups of managers, clients, and customers., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables, • Proficient personal computer skills including electronic mail, record keeping, routine database activity, word processing, spreadsheets, graphics, etc., • Handle multiple tasks simultaneously, • Must have 8-10 years extensive Uninterruptible Power Supply maintenance, installation & repair experience on major brands such as Eaton, APC, MGE, Toshiba, Mitsubishi, Liebert/Vertiv, Online Power, Myers, Chloride & Reillo UPS., • Must have Factory OEM Training certifications in all or some of the above., • Must have working knowledge of UPS Communication Protocol, Toshiba, Mitsubishi, Chloride, Liebert/Vertiv, MGE & Powerware/Eaton., • Working knowledge of combined Generator, ATS & Fire Alarm Systems a plus., • Must be able to stand, walk, and sit for extended periods of time. Must be agile and mobile with respect to finger, hand, arm and leg movement., • Must be able to communicate (speak and hear) effectively to various intellectual levels., • Must be able to lift and carry heavy objects up to 75 pounds., • Must be able to see and focus clearly up close as well as short distances. Education and Experience: • Associate degree or above in electronics/electrical with at least 8 years of related experience OR have 10-15 plus years equivalent experience in a related field, or equivalent combinations of education and experience., • Prior experience as an electrician helpful, • Prior 3-Phase, Single Phase, Single & Multi-Module UPS experienced required Genserve Inc.’s core values define our company. Who we are, how we do business, our business relationships and customer approach allow us to attract and retain the best industry talent. Our ability to connect with our customers and colleagues with respect sets the standard. Our commitment to excellence is unsurpassed. Across our company, our people provide customer service that's exceptional in every way. At Genserve Inc. Power Inc. we’re not just another company…we are a brand. We offer a competitive benefits package which includes medical dental and visions, 401k, development and training opportunities. Are you ready?

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Responsible for performing inspections on in-house machined and/or purchased precision components, units, materials, equipment and all level of assembly and quality control programs to specifications. Interprets manufacturing drawings, diagrams, BOM’s and specifications that result in acceptance or rejection of the inspection. Reviews documentation and performs sampling and testing of incoming components, internally manufactured components, raw materials, and build of assemblies. Reviews and reports performance data. Ensures raw materials, in-process and finished products meet company and test standards. Determines or assists in determining methods and procedures necessary for inspection. Essential Functions: • Perform inspections of components to ensure compliance to drawings, customer specifications and workmanship standards., • Ability of using precision measurement instruments such as a caliper, micrometer, and other required gages applicable to measurements., • Familiar with mechanical measuring equipment such as Optical Gaging Product (OGP), and/or X-ray fluorescence (XRF), testing used to determine the elemental composition of materials., • Knowledge and understanding of different materials used in manufacturing (aluminum, brass, copper, etc.)., • Knowledge and understanding of tolerances and basic GD&T of blueprint drawings., • Visual inspection for workmanship and print compliance with aid of a microscope if applicable., • Maintain inspection logs and records., • Familiar with industry standards such as Mil Specs, IPC-A-610 and MIL-STD-883., • Additional tasks assigned by your supervisor/manager Qualifications: • High School Diploma or equivalent and a minimum of 6 years prior relevant experience or 2-year post-secondary/Associate degree with 2 years relevant experience., • Communicates with contacts typically within the department on matters that involve obtaining or providing information requiring explanation or interpretation to understand and reach agreement., • Follows established processes to complete tasks. Identifies problems and issues in straightforward situations. Escalates issues to supervisor for resolution., • Works to achieve operational targets within job area which has some impact on the overall achievement of results for the team. Work is somewhat limited in scope, typically on smaller, less structured task-related activities. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionMust be US citizen or Green Card Holder and Local NY/NJ. Job Summary: The position is responsible for driving Implementation and supporting projects and other Network Engineers in their day-to-day operational activities as each person will bring their unique skill sets with them to the organization. This position is a direct report to the Technology Group Product Manager with understanding of business goals, business processes, and technology expertise in these areas. This position is responsible for configuring, testing, implementing and supporting software, hardware and systems. This position work closely with Sr. Network Engineers and Architects that drive the analysis and physical design of technical solutions. Implementation involves creating new technology based solutions whereas support involves upgrades, maintenance or issue resolution to existing technology solutions. Job Responsibilities: • Provide network implementation and consulting for data and converged communications infrastructure based largely on Cisco equipment., • While performing this role the candidate will be responsible for., • Perform network-engineering tasks such as assessing and implementing firewall rules, establishing VPNs with partner companies, routing & switching and implementing access control lists, evaluating and installing software upgrades on network and security equipment., • Engage Operations and IT Product teams to analyze security risks, propose mitigations and support network improvement projects., • Collaborate (including staff, vendors, and consultants) to identify and resolve complex, client application and hardware problems impacting availability and performance of the systems ., • Knowledge and ability to perform the roles of Network Engineer routing and switching., • After hours, call-out is required in the performance of the duties and responsibilities of this position. Job Specific Qualifications: Required Qualifications: • Bachelor’s degree., • 6 years of experience in IT networking, with at least three years experience in doing some of the following: designing, implementing, operating & managing multiple network projects and or large-scale IT systems., • Diverse experience in network/systems/security design and implementation of data network infrastructure based on security frameworks like NIST and CIS., • Demonstrated experience creating and maintaining various Secure LAN/WAN, Zero-Trust technologies and tools., • In-depth knowledge of Cisco IOS, Next-Gen firewalls , IPS/IDS, Virtual Private Networks (VPNs), Web Application Firewalls, F5 load balancers, and other network security technologies that may emerge over time., • Working knowledge of Network Security management and monitoring tools (e.g., FireMon, SolarWinds, Firepower Monitoring Center (FMC), etc.), Cisco ISE and commands to ensure quick and efficient resolution of issues., • Demonstrated ability to work independently and multi-task effectively with strong analytical ability, problemsolving skills, and attention to detail., • Demonstrated effective verbal and written communication and facilitation skills; demonstrated ability to develop business cases and sell network investment concepts and foster working relationships with key stakeholders., • Demonstrated experience defining metrics that measure success of the technology solution in addressing business and technical requirements as well as achieving the desired outcomes., • Exposure to Cybersecurity concepts and best practices. Desired Qualifications: • Cisco certifications – Cisco Certified Network Associate (CCNA) Route/Switch, Network +., • Excellent analytical and problem-solving ability., • Understanding of general IT standards, policies, best practices, guidelines, processes., • Minimum Years of Experience 2 years of experience., • Education Bachelor’s.

Job DescriptionDescription: The Vice President (VP), Banking Compliance is a senior leadership role responsible for overseeing and enhancing the Bank’s Compliance Management System (CMS) and compliance operations across deposit operations, commercial and consumer banking, and lending activities. This role serves as a subject matter expert in bank regulatory compliance with a strong focus on Deposit and Lending compliance, HMDA, CRA, and Fair Lending, ensuring adherence to applicable federal and state laws and regulations, including OCC supervisory expectations. The VP will partner closely with business line leadership, risk management, and audit functions to ensure effective compliance oversight and approvals across the full lifecycle of banking products—from account opening and client onboarding to lending and loan lifecycles, including disclosures, customer communications, and regulatory reporting and analysis. The role plays a critical part in managing compliance risk, supporting regulatory expectations, and promoting a strong culture of compliance across the organization. About Servbank: Founded in 1994, Servbank is a banking institution with local roots and national reach. We were built on a foundation of community-orientation, which ensures that no matter who we serve, we do so with the human touch that marks the gold standard of service. We work with individuals, businesses, and communities, so that whether you’re a student, a homeowner, a small business owner, or a community leader, we can help you fulfill your goals. Come create excellence with Servbank. Duties and Responsibilities: Regulatory Compliance Oversight • Lead second-line oversight of compliance across deposit operations, consumer and commercial banking, and lending activities., • Ensure adherence to key regulations including HMDA, CRA, ECOA/Reg B (Fair Lending), TILA, RESPA, UDAAP, TISA, EFTA, and applicable OCC guidance., • Review and approve customer disclosures and notices, including account opening, maintenance, product changes, and fee schedules., • Oversee development, implementation, and maintenance of compliance policies, procedures, and controls across business lines., • Provide expert guidance on regulatory interpretation, applicability, and implementation., • Prepare executive-level reporting for senior management, Risk Committee, and the Board on compliance trends and risks., • Maintain strong relationships with internal audit, legal, and business partners. HMDA, CRA, and Fair Lending Leadership • The ideal candidate will serve as the Bank’s HMDA and CRA Officer and will lead the Bank’s HMDA and CRA Task Forces., • Oversee HMDA data integrity, reporting, and governance, including data validation, scrubbing, and annual LAR submissions., • Lead CRA program oversight, including performance monitoring, assessment area analysis, and regulatory exam readiness., • Direct Fair Lending program activities, including risk assessments, statistical analysis, and monitoring for disparate treatment or impact., • Review findings, root cause analysis, and corrective action plans; ensure timely escalation of material issues., • Partner with internal stakeholders to identify and remediate potential compliance risks. Deposit Operations and Disclosures Expertise • Provide oversight of compliance risks related to deposit products, account servicing, and customer disclosures., • Ensure compliance with regulatory disclosure requirements and customer communications (e.g., Reg DD, Reg E)., • Collaborate with operations and product teams to ensure compliant product design and lifecycle management., • Provide advisory support on new product development, system implementations, and strategic initiatives., • Ensure timely incorporation of regulatory changes into policies, procedures, and controls., • Promote a proactive, risk-aware culture aligned with the Bank’s compliance and risk appetite.Requirements:, • 5+ years of progressive experience in banking compliance, risk management, or audit., • Demonstrated expertise in HMDA, CRA, and Fair Lending, including program management and reporting., • Strong experience supporting deposit operations, disclosures, commercial and consumer lending compliance., • Experience interacting with regulators (OCC, FDIC, CFPB or Federal Reserve)., • Professional certification such as CRCM (Certified Regulatory Compliance Manager) preferred, but not required. Technical Knowledge Deep understanding of: • Consumer protection regulations (ECOA, TILA, RESPA, UDAAP, Reg DD, Reg E, etc.), • HMDA data collection, validation, and reporting requirements, • CRA performance standards and evaluation criteria, • Fair Lending analytics and risk assessment methodologies, • Familiarity with compliance systems, data analytics tools, and reporting platforms. Leadership Skills • Proven ability to lead cross-functional initiatives and influence senior stakeholders., • Strong analytical, problem-solving, and decision-making skills., • Excellent written and verbal communication skills, including executive-level reporting. Preferred Attributes • Experience in a growth-oriented bank ($1B–$10B range) with evolving regulatory expectations., • Ability to build and enhance compliance programs in a dynamic environment. Strong balance of strategic oversight and hands-on execution. Work Location Requirement: This position is designated as remote; however, if you reside within a 50-mile radius of one of our office locations, the role will be considered in-office and not eligible for remote work. EEO Statement: We’re an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description: Responsible for performing inspections on in-house machined and/or purchased precision components, units, materials, equipment and all level of assembly and quality control programs to specifications. Interprets manufacturing drawings, diagrams, BOM’s and specifications that result in acceptance or rejection of the inspection. Reviews documentation and performs sampling and testing of incoming components, internally manufactured components, raw materials, and build of assemblies. Reviews and reports performance data. Ensures raw materials, in-process and finished products meet company and test standards. Determines or assists in determining methods and procedures necessary for inspection. Essential Functions: • Perform inspections of components to ensure compliance to drawings, customer specifications and workmanship standards., • Ability of using precision measurement instruments such as a caliper, micrometer, and other required gages applicable to measurements., • Familiar with mechanical measuring equipment such as Optical Gaging Product (OGP), and/or X-ray fluorescence (XRF), testing used to determine the elemental composition of materials., • Knowledge and understanding of different materials used in manufacturing (aluminum, brass, copper, etc.)., • Knowledge and understanding of tolerances and basic GD&T of blueprint drawings., • Visual inspection for workmanship and print compliance with aid of a microscope if applicable., • Maintain inspection logs and records., • Familiar with industry standards such as Mil Specs, IPC-A-610 and MIL-STD-883., • Additional tasks assigned by your supervisor/manager Qualifications: • High School Diploma or equivalent and a minimum of 4 years prior relevant experience or 2-year post-secondary/Associate degree with 0-2 year’s relevant experience., • Communicates with contacts typically within the department on matters that involve obtaining or providing information requiring explanation or interpretation to understand and reach agreement., • Follows established processes to complete tasks. Identifies problems and issues in straightforward situations. Escalates issues to supervisor for resolution., • Works to achieve operational targets within job area which has some impact on the overall achievement of results for the team. Work is somewhat limited in scope, typically on smaller, less structured task-related activities. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The candidate will take on responsibilities as Regional Sales Manager, with direct oversight of several key territories in the South Central and Southeast of the Unites States. The candidate shall have direct contact and oversight of a hybrid team of organic and Domestic Contract Sales Representatives. Candidate shall control the internal environment by providing quotes, proposals, technical guidance, and in general, customer satisfaction via use of internal systems for these purposes and via interaction with all levels of coworkers in many or most of the internal disciplines. Essential Functions: • Identify and capture new business opportunities with key customers., • Maintain a current order forecast., • Provide quotations for standard products and be equally capable of contributing to the development of complex high-dollar value proposals for the full range of Narda-MITEQ products., • Lead and manage external manufacturing representatives within assigned territory, driving performance, accountability, and revenue growth., • Demonstrated written communication skills in English language is essential. Additional Job Functions (including but not limited to): • Sets appropriate objectives to meet desired revenue goals., • Qualifies and directs sales activities compliant with corporate guidelines., • Performs account management activities to include business development, lead generation, customer qualification, proposal delivery, and contract negotiation., • Understands and assimilates the latest technologies and market data to create account propositions and competitive solutions for high value opportunities., • Establishes a communication path between the company and the Sales Representative/Customer to ensure customer satisfaction. Develops and supports timely resolution to customer or Rep related issues., • Assists sales, support, and marketing staff members in activities such as sales promotion, training, or market research in planning and executing projects., • Participates in multi-disciplinary IPT teams to recommend new application and product features and strategy for the strategic account or territory. Qualifications: • Requires Bachelor’s degree with a minimum of 9 years of experience or 10+ years of related experience, • Knowledge and experience in an appropriate technical discipline that will enable them to maintain full and reasonable understanding of our entire product range, RF specific technical ability is necessary but demonstrated ability in parallel or related technical fields to those of Microwave and RF can also be considered, • Proven experience partnering with prime defense contractors to identify and track program activity, leveraging market intelligence to secure design-in opportunities and accurately forecast order timing., • Must have the appropriate skill necessary to negotiate and close multi-million-dollar contracts., • Must be capable of developing successful account strategies to increase market penetration., • Excellent communication, interpersonal, and multi-cultural skills are essential., • Must possess willingness to regularly travel as necessary., • Candidates must have the ability to manage own time without continuous supervision., • Residence in the South-Central Region of the United States highly preferred due to travel requirements., • Ability to provide reliable forecast and achieve individual and team booking revenue plan, • Ability to achieve Secret Level Security Clearance is desired but not mandatory. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description General Responsibilities: Perform a variety of inspections on materials, precision machined components and electrical-mechanical assemblies to ensure compliance with requirements. Use a wide assortment of measuring instruments including hand tools and gauges, vision system equipment. Prepare quality documentation for final shipments per customer requirements. Specific Duties: • Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as; profilometer, optical comparator, Keyence visual measurement system, height gauge, microscope, smart scope, etc., • Perform incoming and receiving inspection to specified requirements., • Perform inspection of finished details and assemblies to specified requirements., • Enter inspection results into a variety of data collection tools and databases., • Inspection of Soldered and brazed assemblies. Candidate requires internal certification for solder inspection., • Keep accurate records and maintain quality documentation., • Perform inventory movement transactions in the ERP system and ensure traceability of product., • Understand the non-conforming material process to ensure control of material., • Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner., • Write clear material rejection reports that contain problem statements, dimensions, and data., • Retrieve test data from databases and assemble documentation packages to ship with the product., • Use of ERP System in order to retrieve quality requirements and perform tasks related to moving product in system., • Perform tasks as assigned by the Inspection department Supervisor or Quality Manager., • Support the Company Quality Policy, • Generate FAI documentation to supply to customers with shipments as needed. Qualifications: Required Skills • Ability to read, and use micrometers, calipers, heigh gage and other measuring instruments, • Ability to read, and understand engineering drawings and related technical documents, • Working knowledge of Geometric Dimensioning and Tolerance (GD&T) principles and their application, • Basic Statistical Process Control and Statistical Fundamentals, • Experienced with ERP systems, • Strong planning and organizational skills, • Detail oriented, • Good interpersonal skills, • Strong verbal and written communication skills, • Strong math skills, • Visual Acuity mandatory (ability to visually identify color variations and capsule / tablet irregularities), • Flexible availability with regards to shift assignments when necessary, • Competent Microsoft Windows-Office and EXCEL applications Physical Requirements • Ability to lift, push or pull packages of up to 40 lbs., • Ability to work standing for long periods. Desired Skills • Basic Statistical Process Control and Statistical Fundamentals, • Minimum 3 years in a precision manufacturing or machining environment, • Experience with computer software like; Statistical Software, Access, advanced Excel Education and Experience: • Minimum education is High School Diploma, • Associates or higher in Technical Discipline/Trade preferred, • Minimum 3 years in a precision manufacturing or machining environment Compensation: $20.00 - $30.00 per hour based on experience GW Lisk is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description SUMMARY This position is a New Equipment Sales Manager reporting to the President of the company. The New Equipment Sales Manager will have a strong knowledge of sales processes and team leadership with proven problem-solving skills, be an accomplished team player and be able to work directly with Business Development Director and lead the Sales team. In this role, you will manage the product sales functions of the company, providing the leadership needed to achieve the enterprise sales targets. You will lead various functions in the company including management and development of the sales team, providing expertise on sales projects, and achievement of the annual business plan. This role may additionally have individual responsibility for new product sales depending on experience and relationships. ESSENTIAL DUTIES AND RESPONSIBILITIES Including the following. Other duties may be assigned. Sales Leadership: • Responsible for obtaining profitable results through the sales team by developing the team through motivation, counselling, skills development and product knowledge development and true sales leadership., • Responsible for managing the sales team, developing a business plan covering sales, revenue, and expense controls, meeting agreed targets and sales metrics, and promoting the company in the marketplace., • Lead and schedule weekly sales team meetings with team and leadership., • Embody company culture and maintain high sales employee engagement., • Meet pre-determined revenue goals through the activities of direct reports., • Ensure correct usage of our CRM; HubSpot by all team members., • Train and ensure adherence to the company’s sales process. Personnel: • Plan and implement a specific appraisal system that describes the responsibilities and performance standards for each member of the sales team, set individual sales revenue targets and administer the commission plan., • Personally, observe the performance of the Sales Representatives in the field on a regular basis., • Responsible for the planning, recruitment, direction, organization and control of the Sales Representatives - to accomplish specific objectives., • Provide high standards of ongoing training for the Sales Representatives so that they possess enough technical knowledge to present information on the company’s products in an accurate and balanced manner., • Train new sales team members to ensure success., • Coach and develop direct reports. Administration: • Manage the sales administration function, operational performance reporting, streamlining processes and systems wherever possible, and advising senior management on maximizing business relationships and creating an environment where customer service can flourish., • Responsible for monitoring the performance of the sales team by establishing a system of sales metrics, reports and communications involving sales reports, KPIs, and cyclical sales meetings., • Assign sales prospects, set sales goals, and establish training programs for Sales Representatives., • Track sales team metrics and report data to leadership on a regular basis., • Implement performance plans according to company procedure. Planning: • Assist in the development of the annual sales plan, specifically advising on realistic forecasts for each product (based on historical data, market trends, competitive activity, promotional strategy, and sales effort), realistic costs of operating the sales force and sales promotion program plans., • Analyze sales statistics to determine sales potential and to monitor customers' preferences. QUALIFICATIONS AND REQUIREMENTS • Bachelor’s degree in related field., • 5+ years of sales experience selling solutions to commercial and industrial sector., • 3+ years of successful sales leadership experience with a focus on management through KPI’s., • Proven track record of successful negotiation of major account opportunities., • Ability to sell solutions to customer needs at both the executive and operational levels, meet sales goals, and have a strong disciplined approach to sales., • Knowledge and expertise of sales planning, building relationships, and coaching and managing processes., • Ability to develop budgets, staff teams, use HubSpot, and proficiency of Microsoft Office., • Experience with Boilers and HVAC systems is an advantage.\nCompany Description Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members. Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Alcott HR is searching for a Benefits Product Manager to serve as our subject matter expert for employee benefits products, carrier relationships, plan design strategy, and benefits administration. As part of a Professional Employer Organization (PEO), this role helps employers leverage the scale, expertise, and buying power of Alcott's benefits platform to enhance their employee programs. This position bridges the gap between product management, benefits consulting, underwriting, sales, implementation, and client service. The ideal candidate possesses both deep technical expertise in employee benefits and the consultative skills necessary to advise employers, prospects, brokers, and internal stakeholders on strategic benefits decisions. They are equally comfortable explaining a complex funding arrangement to a CFO, training internal teams on a new product offering, or troubleshooting a challenging enrollment issue. This individual will play a critical role in maintaining Alcott's competitive benefits portfolio, supporting growth initiatives, and helping clients maximize the value of their employee benefits programs. Responsibilities: Benefits Product Expertise • Serve as the organization's subject matter expert on medical, dental, vision, life, disability, voluntary, and ancillary benefit offerings., • Maintain detailed knowledge of carrier products, network structures, funding arrangements, underwriting methodologies, and emerging market trends., • Evaluate carrier renewals, product enhancements, and new market opportunities., • Monitor legislative and regulatory developments impacting employee benefits., • Support the development and maintenance of benefit product documentation, training materials, and client-facing resources. Strategic Client Consulting • Advise prospective and existing clients on benefit strategy, plan design, contribution modeling, and employee experience considerations., • Participate in finalist meetings, sales presentations, and strategic client discussions., • Assist employers in balancing competitiveness, affordability, compliance, and workforce objectives., • Provide guidance on funding arrangements including fully insured, level-funded, and alternative funding options where applicable., • Support large client renewals and complex benefits discussions. Sales & Business Development Support • Partner with sales consultants to position Alcott's benefits offerings effectively., • Conduct benefits-focused discovery conversations with prospects., • Assist in responding to RFPs and complex prospect inquiries., • Develop competitive analyses comparing Alcott's offerings against market alternatives., • Support broker and referral partner education initiatives. Internal Enablement • Train sales, client service, underwriting, and implementation teams on benefit products and market developments., • Serve as an escalation point for complex benefits-related questions., • Create educational content and resources for internal stakeholders., • Collaborate with underwriting and pricing teams to ensure accurate product positioning. Product Development & Vendor Management • Evaluate new carrier partnerships and product opportunities., • Participate in carrier negotiations and annual strategic reviews., • Analyze enrollment trends, utilization data, and client feedback., • Identify opportunities to improve product offerings, administration, and client experience., • Support implementation of new benefits products and services. Qualifications • 6+ years of employee benefits experience in a PEO (preferred), brokerage, carrier, consulting, or benefits administration environment., • Deep understanding of group health insurance products and employee benefits programs., • Health insurance producer license preferred., • Experience advising employers on benefits strategy and plan design., • Strong presentation and consultative communication skills., • Ability to explain complex concepts to both technical and non-technical audiences., • Strong analytical and problem-solving abilities., • Proficiency with Microsoft Excel and benefits administration technology., • Knowledge of underwriting methodologies and renewal analysis.

Job DescriptionDescription: Are you passionate about science and precision? Join our Quality Control team as a Laboratory Technician and gain hands-on experience performing chemical and microbial testing for raw materials and finished products in a regulated, GMP-compliant environment. This is an opportunity to develop your technical expertise, learn from experienced professionals, and contribute directly to ensuring the quality and safety of products that reach consumers. Position Summary: The Laboratory Technician is responsible for performing basic chemical and/or microbial analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, documenting results, and maintaining laboratory supplies, chemicals, and logbooks in accordance with SOPs. • Job Type: Full-Time, • Location: Hauppauge, NY, • Works Hours: Monday – Friday, 7:30AM – 3:30PM EST, • Pay Range: $23 per hour, • Start Date: ASAP Responsibilities: include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Log in and track all samples received in the lab for testing and release., • Perform laboratory physical chemistry testing (ie. weighing, particle size analysis, LOD, Halogen Moisture Analysis, Moisture Content/KF, Water Activity, etc.), identification testing (ie. FTIR, UV-VIS, TLC) and wet chemistry testing (ie. ICP-OES/MS, DT, titrations, pH, dissolution media/stock sample preparation, laboratory solution preparation and standardization, etc.), as assigned, in accordance with the prescribed approved analytical test method., • Perform sampling, plating, and testing of product assigned for microbiology analysis along with media preparation, sterilization and storage, etc., as assigned in accordance with the prescribed approved test method., • Maintain proper labeling of chemical reagents., • Maintain a clean and organized laboratory working environment., • Assist in laboratory investigations, as assigned., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Perform routine Metrology functions, including instrument cleaning/preventive maintenance/ calibration/verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Associate’s degree or relevant work experience required; Bachelor’s degree preferred. Skills, Knowledge, and Abilities: • Knowledge of laboratory chemistry or microbiology, and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs

Job DescriptionWarehouse Manager Location: Bay Shore, NY Job Type: Full-Time Job Summary We are seeking an experienced Warehouse Manager to oversee warehouse operations within a food manufacturing environment. This role is responsible for managing receiving, inventory control, order fulfillment, and warehouse efficiency while ensuring compliance with food safety, quality, and workplace safety standards. The ideal candidate is a hands-on leader with strong operational, analytical, and team management skills who can streamline processes, improve inventory accuracy, and support business growth across multiple facilities. Key Responsibilities Warehouse Operations & Inventory Management Oversee daily warehouse operations, including receiving, inventory control, storage, and order fulfillment. Optimize warehouse workflows, space utilization, staffing, and overall productivity. Maintain accurate physical inventory and system transactions. Coordinate with production and logistics teams to ensure timely material movement and order execution. Safety, Compliance & Quality Maintain a safe working environment and enforce workplace safety procedures. Ensure compliance with OSHA, FDA, GMP, HACCP, and applicable food safety regulations. Partner with Food Safety and Quality Assurance (FSQA) to ensure product quality and timely release. Team Leadership & Development Lead, coach, and develop warehouse supervisors and team members. Establish clear performance expectations and promote accountability and teamwork. Support employee engagement, retention, training, and professional development. Performance & Cost Management Establish and monitor KPIs related to inventory accuracy, productivity, service levels, and operating costs. Manage departmental budgets and identify opportunities to reduce costs and improve efficiency. Use reporting tools and data analysis to drive operational decisions. Collaborate with transportation and logistics teams to ensure on-time deliveries and execution. Cross-Functional Collaboration Work closely with Production, Procurement, Operations, Transportation, and Customer Service to support business needs. Participate in planning meetings to align warehouse capacity, materials, and production schedules. Ensure physical inventory movements align with ERP transactions and operational requirements. Continuous Improvement & Systems Implement process improvements to reduce waste, improve accuracy, and increase productivity. Optimize inventory management practices and warehouse procedures. Support ERP and Warehouse Management System (WMS) improvements to enhance reporting, visibility, and data accuracy. Identify opportunities to implement warehouse technology, automation, and Lean practices. Qualifications Bachelor's degree in Business, Supply Chain Management, Operations, or a related field, or equivalent experience. 5-10+ years of progressive warehouse or distribution leadership experience. Experience in food manufacturing, food distribution, or consumer packaged goods (CPG) preferred. Demonstrated success managing inventory, warehouse teams, and operational performance. Working knowledge of food safety regulations, GMPs, HACCP, and OSHA requirements. Preferred Skills & Competencies Advanced Microsoft Excel and data analysis skills. Experience with ERP systems, WMS platforms, and business intelligence tools. Knowledge of Lean Manufacturing, Six Sigma, and continuous improvement methodologies. Experience with warehouse automation and technology implementation. Strong leadership, communication, and problem-solving skills. Ability to manage multiple priorities and collaborate across departments. Data-driven approach to decision-making, process optimization, and cost control. \nCompany Description W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right. W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description Organic Growth Specialist Hauppauge, NY Hybrid Schedule (Monday & Friday Remote | Tuesday–Thursday In Office) Help Shape the Future of Search. At Briggs & Riley, we don't just build exceptional luggage—we create lifelong travel companions backed by the industry's only lifetime guarantee. As one of the world's most awarded premium travel brands, we're looking for an Organic Growth Specialist who is passionate about helping customers discover our brand wherever they search. This is an exciting opportunity to join our Digital Commerce team and help drive organic growth across our global ecommerce business. Reporting into the Digital Commerce Growth Manager, you’ll combine SEO, AI-powered search optimization, content strategy, analytics, and user experience best practices to increase visibility, traffic, and conversions across our digital storefronts in the US, UK, and Canada. If you're naturally curious, love solving problems with data, and get excited about where search is heading—from Google to ChatGPT and beyond—we'd love to meet you. What You'll Do As our Organic Growth Specialist, you'll help improve how customers discover and engage with Briggs & Riley online by: • Executing SEO and AI search optimization initiatives that increase organic visibility and qualified traffic, • Identifying content opportunities across our website and external platforms such as Reddit, Trustpilot, YouTube, forums, and review sites, • Creating SEO-informed content briefs and partnering with our Copywriter to develop engaging product, editorial, and landing page content, • Collaborating with external SEO agencies and internal Marketing, PR, Development, and Digital Commerce teams to implement optimization strategies, • Performing technical SEO audits and recommending improvements to crawlability, indexing, structured data, metadata, and Core Web Vitals, • Monitoring keyword rankings, search visibility, website performance, and LLM referral traffic using GA4, Search Console, SEMrush, and other analytics tools, • Supporting backlink initiatives through partnerships with PR and affiliate marketing teams, • Working with developers and Digital Operations to improve website performance, customer experience, and conversion opportunities, • Optimizing product content and discovery across emerging AI-powered search and commerce platforms What We're Looking For We're looking for someone who enjoys combining creativity with analytics and thrives in a collaborative, fast-moving ecommerce environment. You'll be successful if you have: • 3–5 years of experience in SEO, content strategy, ecommerce marketing, or digital marketing within a DTC business, • Strong understanding of on-page SEO, technical SEO fundamentals, and content optimization, • Experience using Google Analytics (GA4), Google Search Console, SEMrush, Ahrefs, or similar SEO and analytics platforms, • Experience working with Shopify, • Working knowledge of AI-powered search concepts, including structured data, featured snippets, and emerging search experiences across platforms like ChatGPT, Gemini, Copilot, and Perplexity, • Excellent project management, communication, and cross-functional collaboration skills, • A naturally curious, analytical mindset with a passion for continuous learning Bonus Points If You Have • Ecommerce or retail industry experience, • Experience with conversion rate optimization (CRO), • Basic HTML/CSS or technical SEO knowledge, • Experience optimizing content for AI-driven search experiences Why Briggs & Riley? At Briggs & Riley, you'll work alongside an exceptionally talented team that is passionate about building one of the world's leading premium travel brands. We believe great work happens when talented people are empowered to collaborate, innovate, and continually learn. We offer: • Hybrid Work Schedule in Hauppauge Office (Mondays and Fridays REMOTE!), • Competitive salary plus annual bonus incentive, • Generous PTO, • Paid Holidays, • Medical, dental, and vision coverage, • Additional benefits including paid Short Term Disability and Life Insurance, • Voluntary Long Term Disability & Identity Insurance available, • Flexible Spending Accounts, • 401K with company match, • Profit Sharing Plan, • Paid learning and development opportunities, • Fun team building events, • Employee Discounts-over 70%!, • $5,000 Employee Referral Bonus, • College Scholarship Program for Employee’s children, • A collaborative, supportive culture recognized as one of Long Island's Top Workplaces Our Core Values • Family, • Keep your Commitments, • Whatever It Takes, • Respect & Dignity, • Smart & Steady, • Do the Right Thing, • Passion, Pride & Loyalty, • Humility If you're ready to help shape how customers discover Briggs & Riley across today's search engines and tomorrow's AI-powered experiences, we'd love to hear from you.

1Password is growing. We’ve surpassed $400M in ARR and we’re continuing to accelerate, earning a spot on the Forbes Cloud 100 for four years in a row and teaming up with iconic partners like Oracle Red Bull Racing. About 1Password At 1Password, we’re building the foundation for a safe, productive digital future. Our mission is to unleash employee productivity without compromising security by ensuring every identity is authentic, every application sign-in is secure, and every device is trusted. We innovated the market-leading enterprise password manager and pioneered Unified Access Management, a new cybersecurity category built for the way people and AI agents work today. As one of the most loved brands in cybersecurity, we take a human-centric approach in everything from product strategy to user experience. Over 180,000 businesses, from Fortune 100 leaders to the world’s most innovative AI companies, trust 1Password to help their teams securely adopt the SaaS and AI tools they need to do their best work. If you're excited about the opportunity to contribute to the digital safety of millions, to work alongside a team of curious, driven individuals, and to solve hard problems in a fast-paced, dynamic environment, then we want to hear from you. Come join us and help shape a safer, simpler digital future. As a Sr Enterprise Systems Engineer, AI Productivity, you’ll help teams across 1Password work more efficiently by designing, maintaining, and scaling secure artificial intelligence (AI) and automation solutions. You’ll partner with technical and non-technical stakeholders to identify workflow challenges, build practical solutions, and improve how employees use AI-enabled enterprise tools. By enabling secure, effective ways of working, you’ll support 1Password’s mission and help create measurable productivity gains across the company. Reporting into the Manager, Enterprise Tools, this role is based in the United States. How we’re using AI today Our Engineering, Product, and Design teams are thoughtfully integrating AI across the full software and product development lifecycle to move faster without sacrificing quality or security. In practice, that looks like engineers using AI-assisted coding tools to accelerate reviews and catch bugs earlier, product managers synthesizing user research at scale, and designers rapidly prototyping and iterating with AI-generated mockups. We approach AI the same way we approach security: with clear principles, human accountability at every consequential decision point, and rigorous evaluation before anything ships to customers. This is a remote opportunity within the US. What we're looking for: • Bring experience in information technology (IT) systems, automation engineering, or enterprise productivity enablement., • Design and implement technical solutions using application programming interfaces (APIs), connectors, and low-code/no-code tools., • Build and maintain workflow automations that reduce manual effort and improve operational efficiency., • Collaborate effectively with technical and non-technical stakeholders to understand challenges and deliver practical solutions., • Support cross-functional initiatives and deliver reliable, scalable enterprise solutions. Bonus points for: • Experience with AI-enabled productivity platforms, workflow automation tools, or modern integration frameworks such as Glean, Dust, or Workato., • Experience working with enterprise collaboration tools and their integrations, including Slack, Notion, Google Workspace, Zoom, or Asana. What you can expect: • Manage and configure centralized AI and automation platforms for secure, scalable, and reliable use., • Build and maintain AI-powered workflows that streamline operations across teams., • Partner with business stakeholders to translate workflow challenges into effective technical solutions., • Develop documentation, standards, and best practices for enterprise AI and automation., • Provide technical guidance and training to support adoption of AI and automation capabilities., • Improve productivity through measurable reductions in manual steps, workflow completion times, and operational overhead. USA-based roles only: The annual base salary for this role is between $123,000 USD and $172,000 USD, plus immediate participation in 1Password's benefits program (health, dental, 401k and many others), utilization of our generous paid time off, an equity grant and, where applicable, participation in our incentive programs. At 1Password, we approach each individual's compensation with a promise of fair market value and internal equity commensurate with experience and specific skill set. This posting is for an existing vacancy. Our culture At 1Password, we prioritize collaboration, clear and transparent communication, receptiveness to feedback, and alignment with our core values: keep it simple, lead with honesty, and put people first. You’ll be part of a team that challenges the status quo, and is excited to experiment and iterate in search of the best solution. That said, _. Our work is demanding, we strive for excellence, and the pace is fast. We need people who are keen to take on challenging problems, who seek feedback to grow, and who are driven to make an impact. If you're looking for a place where you can settle into a comfortable routine, this might not be the right fit for you. We’re looking for individuals who are proven experts in their fields, as well as those who are highly adaptable, can thrive in ambiguity and through change, are curious, and above all deliver results. How we work with AI We are committed to leveraging cutting-edge technology—including AI—to achieve our mission. We also understand that thinking critically about AI in its current forms will help us create better solutions for our customers and ourselves with its future forms, which will help us continue to close the gap between security and privacy and achieve our mission. We want team members at all levels to take the approach of actively learning AI best practices, identifying opportunities to apply AI in meaningful ways, and driving innovative solutions in their daily work. Embracing the future of AI isn't just encouraged—it's an essential part of how we will be successful at 1Password. This approach extends to our hiring process—candidates are welcome to use AI tools responsibly and thoughtfully during the application process. To us, this means we do ask that you join live interviews without using AI tools so we can get to know how you communicate, solve problems, and collaborate with others. Our approach to remote work We believe in the power of remote work, but recognize that in-person connection is important to help us achieve our mission. While we are a remote-first company, travel for in-person engagement is a part of almost all roles, and we require our employees to be ready and willing to take part. Frequency will depend on role and responsibilities, and may include, but is not limited to: annual department-wide offsites, team meetings, and customer/industry events. What we offer We believe in working hard, and rewarding that hard work through our benefits. While not an exhaustive list, here is a glance at what we currently offer: Health and wellbeing Maternity and parental leave top-up programs Competitive health benefits Generous PTO policy Growth and future RSU program for most employees Retirement matching program Free 1Password account Community Paid volunteer days Peer-to-peer recognition through Bonusly Remote-first work environment *Some roles in our GTM team are currently being hired for in-person hybrid work in Toronto and Austin. These roles will specify on the posting. You belong here. 1Password is proud to be an equal opportunity employer. We are committed to fostering an inclusive, diverse and equitable workplace that is built on trust, support and respect. We welcome all individuals and do not discriminate on the basis of gender identity and expression, race, ethnicity, disability, sexual orientation, colour, religion, creed, gender, national origin, age, marital status, pregnancy, sex, citizenship, education, languages spoken or veteran status. Be yourself, find your people and share the things you love. Accommodation is available upon request at any point during our recruitment process. If you require an accommodation, please speak to your talent acquisition partner or email us at nextbit@agilebits.com and we’ll work to meet your needs. Remote work is a part of our DNA. Given that our company was founded remotely in 2005, we can safely say we're experts at building remote culture. That said, remote work at 1Password does mean working from your home country. If you've got questions or concerns about this, your talent partner would be happy to address them with you. Successful applicants will be required to complete a background check that may consist of prior employment verification, reference checks, education confirmation, criminal background, publicly available social media, credit history, or other information, as permitted by local law. 1Password uses artificial intelligence (AI) and machine learning (ML) technologies, including natural language processing and predictive analytics, to assist in the initial screening of employment applications and improve our recruitment process. See for the latest third party bias audit information. If you prefer not to have your application assessed using AI/ML features, you may opt out by completing . For additional information see our _.

Job Description \n \nSee what you're missing. Our employees work on the world's most advanced electronics -from detecting threats for F-35pilots to illuminating the night for soldiers. Spanning air, land, sea, and space, we are developing the technology of tomorrow, delivered today. Drawing strength from our differences, we're innovating for the future, and you can too. Our flexible work environment provides you the chance to change the world without giving up your personal life. We put our customers first- exemplified by our mission: "We Protect Those Who Protect Us®." Sound like a team you want to be a part of? Come build your career with BAE Systems.\n \n \nBAE Systems is seeking a Systems Engineering Manager within our Command, Control, Communications, Computers, Intelligence, Surveillance, & Reconnaissance Systems (C4ISRS) business area at our Greenlawn, NY location. In C4ISR Systems, you'll help develop systems that sense, control, exploit and disseminate actionable information to warfighters supporting a variety of missions. This leadership role is ideal for a self-motivated individual looking for an exciting opportunity to help create these products along with a solid path for career growth.\n \nYou will be an active member of the Systems Engineering leadership team, ensuring the staffing and technical needs of the business are met. You will use your technical skills and experience to ensure our system design and implementation, meet and exceed our customer expectations. Technical responsibilities include system architecture development/review, design reviews, strategic initiative implementation, bid and proposal development, next generation solution planning and other areas of engagement that align with your skills and career aspirations.\n \n \nPrimary tasks will include:\n\n • Supervising a group of up to 15 system engineers with a people first mentality through open communication and flow down, career development and training, constructive employee feedback, and providing a safe and inclusive work environment.\n, • Managing the System Engineering execution in one of our major product lines, working closely with our project technical leads and engineering managers to ensure overall success of our programs.\n, • Managing system program performance metrics and clearly communicating program status to internal and external customers as well as senior leadership.\n, • Staffing current and projected system engineering needs, providing oversight of program execution relative to system content, and ensuring system engineering processes are being adhered to throughout the product life cycle.\n, • Acquiring and growing staff with the skills and capabilities to meet the demands of projects through hiring, staff development/training, rotation assignments, mentoring, and personal growth opportunities.\n, • Building effective system teams, monitoring employee performance, providing career development and rotation assignment opportunities, mentoring software leads, and performing merit and promotion planning.\n, • Supporting proposal efforts to capture new business and reviewing and approving system engineering estimates.\nBAE Systems offers competitive pay, benefits, and important work-life balance initiatives including every other Friday Off, Flextime, and Telecommuting. BAE also believes in a culture of recognition for the extraordinary contributions of our skilled employees. Our engineers are the lifeblood of our company and we're more than 5,000 strong. With our robust offering of educational and career development opportunities, your chances to grow are limitless.\n \n Required Education, Experience, & Skills \n \n\n • Must have the ability to obtain a Secret clearance\n, • Bachelor's degree in Engineering, or other Scientific with strong systems engineering content\n, • 10+years of applicable systems engineering experience, including all phases of a product life cycle\n, • Demonstrated technical leadership, management skills and ability to work effectively in a team environment\n, • Product development project management experience including scheduling, budgeting, and cost account management\n, • Strong written and verbal communication skills\n, • Strong attention to detail and organizational skills\n, • Experience presenting technical and programmatic information to program teams and customers\n\n Preferred Education, Experience, & Skills \n \n\n • Currently hold an active Secret clearance\n, • Bachelor's Degree or higher in Electrical Engineering\n, • Experienced / trained in Model Based Systems Engineering (MBSE) preferably Cameo/SysML\n, • Proven use and understanding of system engineering concepts\n, • Experience across the entire product development process\n \n, • Including Architecture, requirements, test procedure development, system integration and requirement verification and validation\n \n, • Experience developing test procedures and troubleshooting in a digital and Radio Frequency (RF) electronics lab environment, and potentially at customer domestic and international sites.\n, • Cost Account Manager (CAM) training or experience\n, • Artificial Intelligence (AI) Literacy\n\n Pay Information\n \nFull-Time Salary Range: $153377 - $260743\n \n \nPlease note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. \n \n \nEmployee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.\n \n About BAE Systems, Inc.\n \nBAE Systems, Inc. is a defense, aerospace, and security company headquartered in Falls Church, Virginia, with more than 40,000 employees worldwide. We serve, supply, and protect those who protect us. As one of the most geographically diverse international defense companies, we deliver a full range of products and services spanning air, land, maritime, space, and cyber, including advanced electronics, intelligence solutions, and dedicated customer support.\n \n \nOur culture is performance-driven and values-led, built on curiosity, creativity, and collaboration. Purpose isn't a tagline here. It's what drives us. We're developing breakthrough technologies that defend national security and make a lasting impact on our communities and our planet. When you join BAE Systems, you're not just building a career. You're contributing to a mission that truly matters.\n \n \nThis position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Responsible for performing inspections on in-house machined and/or purchased precision components, units, materials, equipment and all level of assembly and quality control programs to specifications. Interprets manufacturing drawings, diagrams, BOM's and specifications that result in acceptance or rejection of the inspection. Reviews documentation and performs sampling and testing of incoming components, internally manufactured components, raw materials, and build of assemblies. Reviews and reports performance data. Ensures raw materials, in-process and finished products meet company and test standards. Determines or assists in determining methods and procedures necessary for inspection. • Perform inspections of components to ensure compliance to drawings, customer specifications and workmanship standards., • Ability of using precision measurement instruments such as a caliper, micrometer, and other required gages applicable to measurements., • Familiar with mechanical measuring equipment such as Optical Gaging Product (OGP), and/or X-ray fluorescence (XRF), testing used to determine the elemental composition of materials., • Knowledge and understanding of different materials used in manufacturing (aluminum, brass, copper, etc.)., • Knowledge and understanding of tolerances and basic GD&T of blueprint drawings., • Visual inspection for workmanship and print compliance with aid of a microscope if applicable., • Maintain inspection logs and records., • Familiar with industry standards such as Mil Specs, IPC-A-610 and MIL-STD-883., • Additional tasks assigned by your supervisor/manager, • High School Diploma or equivalent and a minimum of 4 years prior relevant experience or 2-year post-secondary/Associate degree with 0-2 year's relevant experience., • Communicates with contacts typically within the department on matters that involve obtaining or providing information requiring explanation or interpretation to understand and reach agreement., • Follows established processes to complete tasks. Identifies problems and issues in straightforward situations. Escalates issues to supervisor for resolution., • Works to achieve operational targets within job area which has some impact on the overall achievement of results for the team. Work is somewhat limited in scope, typically on smaller, less structured task-related activities. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law.

The Administrative Assistant is responsible for assisting the QC Manager in one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, ICP, Technical Support) with any tasks including, but not limited to, maintenance of laboratory documentation, initiation of laboratory chang

The TRS Manager is responsible for executing and leading a team of TRS Staff in business restructuring and bankruptcy related engagements, including bankruptcy litigation and financial due diligence, and addressing complex questions and issues under the direction of a TRS Principal, Director or Senior Manager. The TRS Manager also assists with marketing, networking and business development activities for the TRS Group, including proposal preparation. Bankruptcy & Restructuring Services • Marketing and New Business Development Activities, • Assists Principals, Managing Directors, Directors and Senior Managers in identifying and pursuing new business opportunities, • Assists BDO pitch team in preparing for new business opportunities and responding to inquiries, • Contacts creditors, lawyers, bankers and internal BDO contacts to pursue new business opportunities (creditor committee, debtor, litigation, etc.), • Prepares majority of pitch book for new business opportunity, including cover letter and assist in conflict check process., • Conducts and clears conflict checks and prepares draft retention affidavits or engagement letters; ensures compliance with all other court filing requirements, • Begins to build network of contacts in the industry (lawyers, bankers, PE firms, creditors, etc.), • Cross-sells other BDO services (corporate finance, valuation, tax, due diligence, litigation, assurance, etc.) Engagement Project Leadership • Assists engagement director or principal in executing engagement, • Presents BDO work product to counsel or client and responds to questions, • Interacts with counsel or company management on complex operational, restructuring or bankruptcy issues, • Possesses strong financial restructuring and bankruptcy technical skills, including ability to identify bankruptcy or financial restructuring related issues, • Possesses strong ability to analyze cash flow projections and identify issues, • Evaluates management to determine ability to operate and reorganize business operations, • Assists with the preparation and/or ensures the disclosure statement and reorganization plan meet all required financial and bankruptcy requirements, • Reviews reorganization/liquidation plan, evaluate plans for client and identifies issues, • Evaluates alternative courses of action and potential solutions to achieve best result for client, • Other duties as required Supervisory Responsibilities • Supervises the day-to-day workload of TRS Senior Associates and Associates on assigned engagements; reviews work product, provides timely performance reviews and assists in the development of goals and objectives to enhance staff professional development, • Provides on-the-job training for all TRS Senior Associates and Associates on each engagement, • Acts as Career Advisor to TRS Senior Associates and Associates, as appropriate Qualifications, Knowledge, Skills and Abilities Education: • Bachelors degree in Accounting, Finance or other relevant field required, • MBA or other relevant advanced degree beneficial Experience: • Six (6) years of prior experience performing business restructuring or related consulting services required, • Prior experience working within a national public accounting firm or consulting organization preferred, • One to two years of management experience preferred License/Certifications: • CIRA designation preferred, • CPA and CTP certifications beneficial Software: • Proficient in the use of Microsoft Office Suite, specifically Excel, Word and PowerPoint Other Knowledge, Skills & Abilities: • Excellent oral and written communication skills, including the ability to review work product developed by others, • Willingness to go above and beyond to provide superior work product while meeting engagement deadlines, • Solid analytical skills, including ability to identify issues and anomalies, • Solid organizational skills especially ability to meet project deadlines with a focus on details, • Ability to successfully multi-task while working independently or within a group environment, • Proven ability to work in a deadline-driven environment and handle multiple projects simultaneously, • Ability to effectively managing staff and delegate work assignments as needed, • Ability to build and maintain strong relationships with internal and client personnel, • Ability to encourage team environment on engagements and contribute to the professional development of assigned personnel, • Management presence and ability to act as key contact on assigned engagements, while timely keeping Directors and Principals informed of progress, • Ability to develop financial models, especially integrated P&L with balance sheets and cash flows, • Solid knowledge of debt and lease restructuring, cash flow and balance sheets, along with liquidation analysis, • Solid knowledge of bankruptcy and insolvency process Individual salaries that are offered to a candidate are determined after consideration of numerous factors including but not limited to the candidate's qualifications, experience, skills, and geography. National Range: $135,000 - $160,000 Maryland Range: $135,000 - $160,000 NYC/Long Island/Westchester Range: $135,000 - $160,000

Hauppauge, New York, United States For over 35 years, KLD Labs, Inc. has delivered innovative machine vision and intelligent measurement solutions to the global railway industry. Our technologies support monitoring, inspection, condition-based maintenance, and asset management needs for rail operators worldwide. As a trusted leader in transportation automation and safety systems, we design, manufacture, and customize solutions that improve efficiency and reliability across the rail sector. We are seeking a proactive and detail-oriented Project Manager to lead the delivery and customization of our complex product solutions from initial concept through installation. Based in Hauppauge, NY, this individual will serve as the primary point of contact for both internal teams and external clients, managing scope, schedule, and resource coordination across multidisciplinary engineering, production, and service teams. Key Responsibilities • Lead all aspects of project execution from requirements definition to delivery and post-installation handoff, • Manage research and development initiatives., • Act as primary liaison between clients and KLD technical teams to translate customer requirements into actionable specifications, • Support proposal generation and contribute to project scope and estimation efforts, • Develop and maintain detailed project plans, schedules, and budgets; monitor progress and adjust as needed, • Facilitate cross-functional coordination across engineering, production, procurement, and field service teams, • Oversee installation and deployment of KLD products, including on-site coordination when necessary, • Provide accurate, timely status reporting to internal stakeholders and customers, • Manage risk identification, mitigation, and escalation of critical path impediments, • Coordinate and document internal and external meetings, conference calls, and customer touchpoints, • Ensure timely resolution of project conflicts related to technical decisions, scope change, or procurement issues, • Oversee customization of existing products for customer-specific applications, • Ensure successful hand-off to Service team following project deployment, • Maintain complete and accurate project documentation in accordance with company protocols Qualifications Required • Bachelor's degree in Engineering, Computer Science, Systems Engineering, or a related technical field, or equivalent experience, • Minimum 3 years of experience managing end-to-end technical projects, preferably involving integrated hardware/software systems or industrial product deployments, • Demonstrated ability to define and document technical and functional requirements with internal and external stakeholders, • Demonstrated ability to coordinate system installation and deployment at customer sites, • Demonstrated ability to track and manage detailed project budgets, resources, and schedules, • Demonstrated ability to adjust work plans based on evolving priorities or technical challenges, • Demonstrated ability to facilitate cross-functional meetings and provide customer-facing status updates, • Demonstrated ability to identify, escalate, and manage resolution of critical path issues, • Familiarity with product configuration control and change management processes, • Excellent communication skills, with the ability to translate technical concepts into clear deliverables and reports, • Proficiency with project management and collaboration tools (e.g., MS Project, Smartsheet, Confluence, JIRA), • Strong organizational skills and attention to detail, • Ability to travel domestically and internationally up to 1520% Qualifications Desired • PMP certification or equivalent project management credential, • Experience in the railway, transportation, automation, or machine vision industries, • Familiarity with sensor systems, vision technologies, or embedded hardware/software integration, • Experience working in a regulated environment (e.g., ISO 9001), • Due to the international travel requirements of this role, proficiency in German or French is preferred Salary Range $90,000 - $110,000 USD

We are searching for an experienced Manufacturing Engineering Manager to join one of our premier aerospace manufacturing clients. This leadership role is ideal for an engineering professional who thrives on driving operational excellence, leading technical teams, and implementing world-class manufacturing processes. Our client is a growing precision aerospace manufacturer committed to innovation, continuous improvement, and delivering high-quality products that meet the industry's most demanding standards. The Manufacturing Engineering Manager will lead a team of manufacturing engineers responsible for improving production processes, developing manufacturing methods, supporting production, and driving continuous improvement initiatives. This individual will collaborate across engineering, operations, quality, and supply chain to ensure efficient, cost-effective manufacturing while maintaining the highest quality standards. • Lead, mentor, and develop a team of Manufacturing Engineers, • Develop and maintain Bills of Materials (BOMs), • Evaluate and improve manufacturing methods, workflows, and production processes, • Estimate production times, labor requirements, equipment needs, and manufacturing costs, • Create and maintain CAD models and manufacturing documentation using CATIA V5 or similar CAD software, • Generate engineering drawings and product structures that accurately reflect customer requirements, • Establish manufacturing tolerances and process documentation, • Support production and subcontractors with engineering solutions and technical guidance, • Coordinate engineering priorities with Operations, Quality, Purchasing, and Production teams, • Drive Lean Manufacturing and Kaizen initiatives focused on quality, efficiency, and waste reduction, • Resolve manufacturing challenges through analytical problem-solving and continuous improvement, • Ensure compliance with company safety and quality standards Required • Bachelor's Degree in Engineering preferred (Associate's Degree considered with relevant experience), • Minimum 5 years of Manufacturing Engineering experience, • Previous leadership or supervisory experience, • Experience in aerospace or precision manufacturing environments, • Strong understanding of manufacturing processes and production planning, • Excellent communication, leadership, and organizational skills Preferred • Experience with CATIA V5, • Epicor ERP experience, • Lean Manufacturing and Kaizen implementation experience, • Strong CAD and technical documentation skills, • Continuous Improvement mindset, • Competitive Salary, • Medical, Dental & Vision Insurance, • 401(k) with company benefits, • Paid Time Off, • Career Growth Opportunities

We are searching for an experienced Manufacturing Engineering Manager to join one of our premier aerospace manufacturing clients. This leadership role is ideal for an engineering professional who thrives on driving operational excellence, leading technical teams, and implementing world-class manufacturing processes. Our client is a growing precision aerospace manufacturer committed to innovation, continuous improvement, and delivering high-quality products that meet the industry's most demanding standards. The Manufacturing Engineering Manager will lead a team of manufacturing engineers responsible for improving production processes, developing manufacturing methods, supporting production, and driving continuous improvement initiatives. This individual will collaborate across engineering, operations, quality, and supply chain to ensure efficient, cost-effective manufacturing while maintaining the highest quality standards. • Lead, mentor, and develop a team of Manufacturing Engineers, • Develop and maintain Bills of Materials (BOMs), • Evaluate and improve manufacturing methods, workflows, and production processes, • Estimate production times, labor requirements, equipment needs, and manufacturing costs, • Create and maintain CAD models and manufacturing documentation using CATIA V5 or similar CAD software, • Generate engineering drawings and product structures that accurately reflect customer requirements, • Establish manufacturing tolerances and process documentation, • Support production and subcontractors with engineering solutions and technical guidance, • Coordinate engineering priorities with Operations, Quality, Purchasing, and Production teams, • Drive Lean Manufacturing and Kaizen initiatives focused on quality, efficiency, and waste reduction, • Resolve manufacturing challenges through analytical problem-solving and continuous improvement, • Ensure compliance with company safety and quality standards, • Bachelor's Degree in Engineering preferred (Associate's Degree considered with relevant experience), • Minimum 5 years of Manufacturing Engineering experience, • Previous leadership or supervisory experience, • Experience in aerospace or precision manufacturing environments, • Strong understanding of manufacturing processes and production planning, • Excellent communication, leadership, and organizational skills, • Experience with CATIA V5, • Epicor ERP experience, • Lean Manufacturing and Kaizen implementation experience, • Strong CAD and technical documentation skills, • Continuous Improvement mindset, • Competitive Salary, • Medical, Dental & Vision Insurance, • 401(k) with company benefits, • Paid Time Off, • Career Growth Opportunities

We are searching for an experienced Manufacturing Engineering Manager to join one of our premier aerospace manufacturing clients. This leadership role is ideal for an engineering professional who thrives on driving operational excellence, leading technical teams, and implementing world-class manufacturing processes. Our client is a growing precision aerospace manufacturer committed to innovation, continuous improvement, and delivering high-quality products that meet the industry's most demanding standards. The Manufacturing Engineering Manager will lead a team of manufacturing engineers responsible for improving production processes, developing manufacturing methods, supporting production, and driving continuous improvement initiatives. This individual will collaborate across engineering, operations, quality, and supply chain to ensure efficient, cost-effective manufacturing while maintaining the highest quality standards. • Lead, mentor, and develop a team of Manufacturing Engineers, • Develop and maintain Bills of Materials (BOMs), • Evaluate and improve manufacturing methods, workflows, and production processes, • Estimate production times, labor requirements, equipment needs, and manufacturing costs, • Create and maintain CAD models and manufacturing documentation using CATIA V5 or similar CAD software, • Generate engineering drawings and product structures that accurately reflect customer requirements, • Establish manufacturing tolerances and process documentation, • Support production and subcontractors with engineering solutions and technical guidance, • Coordinate engineering priorities with Operations, Quality, Purchasing, and Production teams, • Drive Lean Manufacturing and Kaizen initiatives focused on quality, efficiency, and waste reduction, • Resolve manufacturing challenges through analytical problem-solving and continuous improvement, • Ensure compliance with company safety and quality standards, • Bachelor's Degree in Engineering preferred (Associate's Degree considered with relevant experience), • Minimum 5 years of Manufacturing Engineering experience, • Previous leadership or supervisory experience, • Experience in aerospace or precision manufacturing environments, • Strong understanding of manufacturing processes and production planning, • Excellent communication, leadership, and organizational skills, • Experience with CATIA V5, • Epicor ERP experience, • Lean Manufacturing and Kaizen implementation experience, • Strong CAD and technical documentation skills, • Continuous Improvement mindset, • Competitive Salary, • Medical, Dental & Vision Insurance, • 401(k) with company benefits, • Paid Time Off, • Career Growth Opportunities