Trabajos travel required en Binghamton, New YorkCrear alertas

Education/Experience Minimum Required: • Bachelor degree in Nursing, • 2 years of clinical nursing experience in an acute care setting, • Completion of an accredited WOCN program for WOC Nursing (WOCNEP) within 1 year Preferred: • Previous completion of a WOCNEP program, • Previous experience as a WOCN, • 6 years of clinical nursing experience in an acute care setting License/Certification Minimum Required: • Current New York State Registered Nurse License, • Certification through the WOCN Certification Board (WOCNCB) within 1 year, • CPR Certification required upon hire. Preferred: • Current certification as a Certified Wound, Ostomy, Continence Nurse (CWOCN) through WOCNCB Work Environment • Work is performed in an office environment and patient care areas which require working in proximity to other employees and patients. Rooms are air conditioned and heated. Frequent walking, standing, bending and lifting. Travel between UHS sites occurs daily. Stressful environment with frequent interruptions. Exposure to equipment cleaning solutions and disinfectants. PPE (Eyewear, Masks, Face shields, Shoe covers, and Gloves) as required by UHS Hospitals Infection Control policies. Age of Patients Served • All Age Groups HIPAA Roles‐Based Access to Patient Information • All ‐ Access to patient information, including restricted information ‐ Level 4

Essential Functions: Essential functions are those tasks, duties and responsibilities that are performed with or without reasonable accommodation. Works in conjunction with UHSH Chief Nursing Officer/Vice President Patient Care Services or CMH Vice President of Clinical Services, Patient Care Services Leadership, and Quality Management, as well as UHS system members. Reviews regulatory requirements from Joint Commission/ACHC, Department of Health, and CMS as they apply to Patient Care Services (PCS). At UHSH, Manages the Assistant Coordinator of Nursing Quality and Safety. At CMH, Manages MDS assessment entries and submissions. At CMH, Supports Swing Bed program operations and regulatory compliance. Coordinates with Quality Management to identify quality issues. Participates in multiple interdisciplinary committees which focus on quality, fall prevention, and safe patient handling. Analyzes data and reports from these committees to identify areas of improvement for Patient Care Services. Works with Nursing Leadership to implement plans which will facilitate improvement in areas identified. Acts as a resource and consultant to nurse managers, nursing staff, and nursing education staff. Participates in unit specific quality improvement plans using the PDSA model and implements rapid action plans as needed and supports sustainability for action plans. Participates in and supports Nursing councils, committees, and leadership meetings by providing performance improvement data, updates from special projects, updates related to regulatory issues, nursing practice issues and other meetings that impact the falls prevention program. Site coordinator for NDNQI program. Reviews data from these reports to make recommendations to entity's Nursing Leadership (i.e. Chief Nursing Officer, VP, DONs, SLMs, and/or Assistant Coordinator of Nursing Safety and Quality) on nurse‐sensitive quality issues. Acts as a resource and consultant to UHSH Nursing Education and Professional Practice or CMH Training and Development related to educational requirements, policy and procedure updates, and form changes that will require education for all nursing staff. Non‐Essential Functions: Duties the employee may perform that are not essential as defined in the job description. Will perform additional responsibilities, as requested Education/Experience • Minimum Required:, • Bachelor's Degree in Nursing or Healthcare Administration (For CMH, must at minimum be currently enrolled in Bachelor's program and complete within 2 years of hire), • Three (3) years of experience in a hospital setting to include background in clinical operations, quality improvement, regulatory compliance, and patient safety, • Lean Expert required within 1 year, • Preferred:, • Lean Expert, • For CMH, MDS experience in LTC or Swing Bed setting License/Certification • Minimum Required:, • Current New York State license as a Registered Nurse, • CPR within 3 months of hire, • Preferred:, • Professional certification in a related specialty Work Environment • Work is performed in an offices or meeting rooms which require working in proximity to other employees and patients. Rooms are air conditioned and heated. Sitting for long periods with some travel to other UHS System facilities. PPE (Eyewear, Masks, Face shields, Shoe covers, and Gloves) as required by UHS Hospitals Infection Control policies. Age of Patients Served • Not Applicable HIPAA Roles‐Based Access to Patient Information • All ‐ Access to patient information, including restricted information ‐ Level 4 Staff Supervised • At UHSH, 1 ‐ Assistant Coordinator of Nursing Safety and Quality, • At CMH, none

Provides primary care to patients, collaborating with and under the direction of physicians in the clinic, following established standards and practices. Helps with all aspects of patient care, including diagnosis, treatments and consultations. Educates patients about preventative care and prescribed treatments. Conducts physicals, orders tests and serves as a patient's primary healthcare provider. Education/Experience Minimum Required: • Master of Science in Nursing (MSN) degree, • Possession of an NPI (National Provider Identification) number, as evidenced by the receipt of a copy of the notification assigning the number, • Successful completion of an approved Nurse Practitioner program, • Three (3) years of professional nursing experience in a clinical setting License/Certification Minimum Required: • Current NYS Registered Professional Nurse License or Physician Assistant License., • Documentation of current CPR certification required within one (1) week of hire, with maintenance of current CPR certification during employment, • Certified Prescriptive Privilege in NYS Preferred: • Advanced Cardiovascular Life Support (ACLS) Certification, • Possession of Bureau of Narcotics and Dangerous Drugs (BNDD)Number Work Environment • All work is performed in offices and patient examination rooms that require working in close quarters with other employees and patients. The offices are air conditioned/heated. Travel to other UHS Physician Practice locations may be necessary., • PPE is used as required by Infection Control policies. Age of Patients Served • All Age Groups HIPAA Roles‐Based Access to Patient Information • All ‐ Access to patient information, including restricted information ‐ Level 4

Provides primary care to patients, collaborating with and under the direction of physicians in the clinic, following established standards and practices. Helps with all aspects of patient care, including diagnosis, treatments and consultations. Educates patients about preventative care and prescribed treatments. Conducts physicals, orders tests and serves as a patient's primary healthcare provider. Education/Experience Minimum Required: • Master of Science in Nursing (MSN) degree, • Possession of an NPI (National Provider Identification) number, as evidenced by the receipt of a copy of the notification assigning the number, • Successful completion of an approved Nurse Practitioner program, • Three (3) years of professional nursing experience in a clinical setting License/Certification Minimum Required: • Current NYS Registered Professional Nurse License, • American Nurses Credentialing Center (ANCC) or American Academy of Nurse Practitioners (AANP) certification, • Current NYS Certified Nurse Practitioner (CNP) license and certification with New York State Education Department, • Documentation of current CPR certification required within one (1) week of hire, with maintenance of current CPR certification during employment, • Certified Prescriptive Privilege in NYS Preferred: • Advanced Cardiovascular Life Support (ACLS) Certification, • Possession of Bureau of Narcotics and Dangerous Drugs (BNDD)Number Work Environment • All work is performed in offices and patient examination rooms that require working in close quarters with other employees and patients. The offices are air conditioned/heated. Travel to other UHS Physician Practice locations may be necessary., • PPE is used as required by Infection Control policies. Age of Patients Served • All Age Groups HIPAA Roles‐Based Access to Patient Information • All ‐ Access to patient information, including restricted information ‐ Level 4

Schedule 40 hours per week Day ‐ rotational schedule Required Functions Develop and maintain a well‐coordinated, multi‐disciplinary sepsis accreditation program at UHS Develops, reviews, and updates standards of care, policies, clinical pathways, protocols, and order sets to comply with sepsis program best practices and optimal patient outcomes, Acts as an expert resource for sepsis care. Serves as coordinator for all sepsis workflows. Collaborates with the quality management department & sepsis registry programs and staff to ensure timely and accurate data abstraction/entry occurs. Responsible for developing, coordinating and ensuring delivery of regular sepsis education to nurses, physicians, clinicians, patients, families, Emergency Medical Services (EMS), communities, referring hospitals. Develops performance improvement plans for sepsis programs that achieve and maintain positive patient outcomes. Promotes a positive image of the UHSH to patients, physicians, EMS, hospital staff, and the community. Monitors and adheres to following sepsis rounding procedures on admitted sepsis patients and navigates their care; lead/supervise other nurse navigators if assigned. Participates in appropriate hospital committees. Actively participates on local, regional, and national advisory groups to work to advance the science of care for the sepsis patient. Actively remain abreast of current evidence‐based practice for sepsis. Education and Experience Minimum Required • Bachelors degree, • 2‐5 years clinical nursing experience in the Emergency Department, Critical Care, or working in the inpatient service line. License and/pr Certification Minimum Required • NYS Registered Nurse Work Environment • Work is performed in an office environment that requires working in proximity to other employees and patients., • The office is air conditioned as well as heated., • Exposure to equipment cleaning solutions and disinfectants., • Fast‐paced environment including frequent interruptions., • Frequent sitting, walking, standing and bending., • Possibility of lifting of patients., • Mobility may include access through a multi‐level facility, including climbing stairs., • Employee required to have reasonable access to transportation to meet work requirements made in the ordinary course of business in a timely and efficient manner (i.e., travel to various office locations)., • PPE‐ Eyewear, Masks, Face shields, Shoe covers, Gloves per UHS Infection Control and CDC guidelines when appropriate Age of Patients Served • All Age Groups HIPAA Roles‐Based Access to Patient Information • Clinical ‐ Access to patient information that is not restricted (an example of restricted information is ARU) ‐ Level 3 Staff Supervised • Not Applicable

With a starting rate of $40.70/hr., this program is offered with NO contractual obligation; however, our graduate nurses typically stay with UHS upon completing their residency, seamlessly continuing their journey as a valued member of our Nursing Division. Graduate Nurse positions are available across all shifts and in several clinical areas at both UHS Wilson Medical Center in Johnson City, NY, and UHS Binghamton General Hospital in Binghamton, NY. Opportunities are available in med/surg, critical care, emergency, telemetry, operating rooms, surgical step‐down, mom/baby units, and behavioral health. Details of your shift and unit preferences will be discussed during the interview process. For more information, you can reach out to our Graduate Nurse Recruiter, Taylor Inman, at Taylor.inman@nyuhs.org or 607‐205‐7352. At UHS, we're here to support you every step of the way, starting with a benefits package designed to help you succeed. Here's what our eligible Graduate Nurses receive: • Starting base pay of $40.70/hour plus shift differential (equal to a base salary of $84,656 for a fulltime position), • Tuition forgiveness of $15,000 for an ASN degree or $20,000 for a BSN degree, • Relocation assistance of $5,000 if you live more than 50 miles from the Binghamton area, • Immediate accrual of PTO, • 403(b) retirement savings plan with employer match and contribution model, • Comprehensive health, dental, and vision insurance if you're hired into a position regularly scheduled for at least 32 hours per week (80% FTE), • Employee discounts, wellness rewards, mental health resources, and perks like virtual concierge, financial planning, and legal services Joining our _ means starting your RN career with the support and guidance you need to thrive. Here's what Graduate Nurses can expect: • Travel through the program and your first year as an RN with the same cohort—experience the emotions of your first year together in a continually supportive environment, • Begin with on‐unit shadowing and transition to supervised clinical care as your confidence grows, • Complete 30 hands‐on "skills encounters" with your preceptor and teammates during the first six months, gaining confidence and signing off on essential skills as you step into your independence, • Spend the last six months building leadership skills with workshops on clinical coaching, evidence‐based practice, communication, and de‐escalation When you choose to stay with UHS as a Staff Nurse, you'll find many ways to develop your career and make connections with your colleagues. The Nursing Division takes great pride in shaping their teams' work experiences to help you grow and ensure your voice is heard. Here are some additional benefits and professional development opportunities we offer: • ASN to BSN Education Incentive Program paid directly to your academic program, • Clinical Ladder advancement and mentorship program, • Financial support to receive ANCC specialty credentials, • ? Shared Governance models with multiple councils and committees, including Unit Councils, Nursing Practice, Nursing Quality, Nursing Professional Development, and more Education/Experience Minimum Required: • A graduate of an accredited school of Nursing Preferred: • Bachelors of Science degree in Nursing, • Previous clinical nursing experience in an acute care or ambulatory setting License/Certification Minimum Required: • Current New York State Registered Nurse License or Limited Permit, • CPR within 3 months of hire Preferred: • Professional certification in a related nursing specialty, • Relevant skills certification (i.e., ACLS, Basic Coronary) Located in New York's beautiful Southern Tier, UHS serves more than 500,000 people through our local, non‐profit healthcare system of 60+ locations, including four hospitals and dozens of primary and specialty care offices. With a team of over 6,300 employees, we pride ourselves on living our Values of Compassion, Trust, Respect, Teamwork, and Innovation every day—providing exceptional care and a supportive environment for both our patients and our team. Here, community connections are second to none. We don't just serve our community, we're a part of it, and it's a place we call home. Team UHS can be found at almost every local walk, fundraiser, and sporting event. The Greater Binghamton area offers a unique blend of culture, history, and recreation, with easy access to New York City, the Finger Lakes, and Niagara Falls. ‐‐‐‐‐ United Health Services is an Equal Opportunity Employer. United Health Services, Inc. and the members of the UHS System neither are affiliated with, sponsored, endorsed nor approved by, nor otherwise associated with, Universal Health Services, Inc. (NYSE: UHS), UHS of Delaware, Inc. nor their affiliates, which can be found at www.uhsinc.com.

Whether you are an experienced Advance Practice Provider looking for a change or a New APP, UHS Primary Care offers you excellent opportunities. All new graduate hires will attend our Advance Practice Residency Program which prepares you to provide safe quality care in a Primary Care practice. The successful applicant will cover providers patient panels while they are out for disability, FMLA, and/or vacation time. Providers may also perform acute tele‐medicine visits from their home base practice. Family Nurse Practitioners must possess a current New York State license as an RN and Family Nurse Practitioner. Physician Assistants likewise must possess a current license to practice in New York State. This exciting new position gives you the flexibility to balance your family and work schedule while continuing to provide exceptional care to our patients. UHS Primary Care Practices are Nationally Recognized by NCQA and a Certified Patient Centered Medical Home. Our Primary Care practices provide health promotion, disease prevention, health maintenance, patient education, diagnosis and treatment of acute and chronic illnesses for patients of all ages. United Health Services Medical Group is a progressive multi‐specialty group with a large primary care base, consisting of over 540 healthcare providers in 30+ medical and surgical specialties in multiple locations. The group is affiliated with United Health Services Hospitals, the regional leader in healthcare. There is a strong market presence in the region and an excellent referral base. Salary Range: $131,900 ‐ $155,200 annually Work Environment • All work is performed in offices and patient examination rooms that require working in close quarters with other employees and patients. The offices are air conditioned/heated. Travel to other UHS Physician Practice locations may be necessary., • PPE is used as required by Infection Control policies. Age of Patients Served • All Age Groups HIPAA Roles‐Based Access to Patient Information • All ‐ Access to patient information, including restricted information ‐ Level 4

Job Description JOB DESCIRPTION Position: HVAC Service Manager Reports to: Director - HVAC Division Status: Exempt Full-time Salary Range: $70k - $90k ESSENTIAL FUNCTIONS- include and are not limited to: The HVAC Service Manager is responsible for working with our Service Technicians and Installation teams to provide leadership, guidance & technical support, on-site training & development and any other support that they may need to perform their job to the best of their abilities while maintaining or exceeding company standards. Is responsible for working with HVAC staff on communications and implementation of standard operating procedures and best practices for their region. This position will require time in the field in support of field staff for training, in areas that require special attention and may be asked to work in a back-up roll or for assistance in the field as needed. Is responsible directly and/or indirectly for HVAC Service Technicians, HVAC Installers, HVAC CSR?s/Dispatchers, HVAC Service Parts Coordinators. MANAGEMENT RESPONSIBILITIES- include and are not limited to: • Work with our Customer Service Team to oversee and coordinate completion of all Service Technician?s and Installers daily tasks per their current job description. Includes proper skill matching, efficient routing, providing information, tools and necessary materials to complete their jobs., • Work with technicians and installers to ensure needed tools, parts, and inventory are matched with the work being done in the field to help reduce waste and increase efficiencies., • Be a direct first line of support for our Technicians and Installers to ensure compliance with company policies & processes, development, quality control, safety, and profitability in the field while providing our customers the highest possible level of customer service., • Ride and work with Service Technicians and Installers on site as needed for the purpose of training, quality control, compliance with company safety polices and to identify areas where individual Service Technicians need training., • Identify and coordinate required training for all Technicians and Installers, either as a group or individually as needed. This includes the training for all new hires., • Assist with and approve weekly payroll for all employees under your supervision., • Work in the field on advanced or more complex problems that require special attention., • Assist with the recruiting, interviewing, and hiring of new Service Technicians as needed., • Attend trainings and meetings as requested by your direct supervisor., • Other assigned duties or tasks as needed., • Assists Director as needed on development, creation, and implementation of Service department quality standards and best practices., • Responsible for setting communication standards and creating uniformity with how we communicate to our customers., • Works with HVAC CSR?s, billing, and sales to help implement consistent processes across all service departments., • Works with Regional, Operations, Service and Customer Service on the planning rollout of processes and provides continual support throughout implementations., • Provides training and guidance on adopted best practices in person and remotely, • Complete any reports and paperwork according to company standards, policies and procedures., • Report any incidents accurately and timely., • Exchange trade related knowledge and information with the supervisor and co-workers., • Communicate with the supervisor on a daily basis., • Participate in any required certifications and safety meetings., • Reports to work with minimal absenteeism or tardiness., • Attend job related training and informational seminars as requested., • Performs other job-related activities and special projects as assigned FIELD REQURIEMENTS: • Install, maintain and repair heating, ventilation, and cooling units. Includes proper diagnosing and repair of mechanical & electrical components for these systems., • Maintain good working order of company vehicle, including appearance, reporting any issues to your direct Supervisor as needed., • Maintain proper stock, parts, tools, and safety equipment in the vehicle., • Document all installed equipment upon arrival: make, model, serial number, necessary measurements and pictures as necessary and prepare neat, complete service reports and records., • Diagnose diverse service issues, obtain any replacements parts, calibrate system to manufacturer?s recommendations and explain fully to customer what the issue is and what is needed to correct it. QUALIFICATIONS AND SKILLS- include and are not limited to: • Minimum of 5 years of experience in installation, maintenance, troubleshooting, and correcting diverse HVAC service issues., • Strong leadership qualities, including a positive attitude and being able to work with others in a team atmosphere., • Excellent customer service skills with a strong desire to exceed customer expectations., • The ideal candidate is highly organized and detail oriented., • Possess computer skills, including basic Excel, Word, Outlook email, and typing., • Excellent communication skills, verbal and electronic., • Is comfortable teaching and relaying information in a way that can be easily comprehended., • Active listening skills, is collaborative, and responds proactively to feedback., • Has advanced knowledge of the HVAC business workings and a desire to learn., • Multi-tasks and has high standards for quality and accuracy., • Works well independently and as part of a team., • Enjoys working on projects and participating in creating and implementing new processes and procedures., • Has patience and can maintain composure under frustrating circumstances., • Can see big picture and work well with other departments to overcome challenges., • Ability to travel regularly with occasional overnights OTHER REQUIREMENTS: • This position also requires the Service Manager to be available after normal business hours and on weekends as needed to handle all necessary customer inquiries., • The position requires having excellent customer service, listening and influencing skills., • Valid driver?s license and clean vehicle driving record. The list of requirements, duties and responsibilities is not exhaustive but is merely the most accurate list for the current job. Management reserves the right to revise the job description and to require that other tasks be performed when the circumstances of the job change. (For example, emergencies, changes in personnel, workload or technical development.)

Job Description Now Hiring Part Time School Bus Monitors/Aides - Binghamton School District, Binghamton, New York As a Part Time School Bus Monitor, you will play a vital role in your community and the lives of the students. You will assist the bus driver in providing an excellent and safe journey for students to and from school. No experience as a School Bus Monitor is required! We will guide you with our industry-leading safety and training programs. Why Join First Student as a Bus Monitor? • Pay Details: Dependent on experience and qualifications, • Hourly Rate: $18.00 - $18.54 per hour, • Medical, Dental, Vision, & Life insurance or coverage options, • 401(k) Retirement Plan with company match., • Part-time, flexible schedule: Split shifts (AM/PM routes), weekdays only; No nights, weekends, holidays, or summers., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues., • Community Impact: Be a trusted figure for students and families., • Employee Discount Program: Discounts on various products and services. Your day as a School Bus Monitor/Aide will include: • Help students safely board and exit the bus, • Assist children with special needs during transport, • Ensure students remain seated and follow bus safety rules, • Communicate with the driver to maintain a safe, calm ride, • Provide care and encouragement to students each day School Bus Monitor/Aide qualifications: • At least 21 years of age, • Strong communication and interpersonal skills., • Ability to work flexible split shifts (AM/PM)., • Physical ability to assist students and perform emergency procedures., • CPR/First Aid certification preferred., • Friendly, reliable, and patient working with children, • Team-oriented with a focus on safety Apply today and become a valued part of the school community! Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description Now Hiring Part Time School Bus Drivers - Binghamton School District, Binghamton, New York Sign-On Bonus: $3,000* As a Part Time School Bus Driver, you will play a vital role in your community and the lives of students. You will start students' days with morning pickup before school and transport them safely back home in the afternoon. Additional hours for field trips and special event transportation may be available. No experience is necessary to become a school bus driver! We are here to help you succeed with expert training and guidance to help you become a safe and professional First Student school bus driver. School Bus Driver benefits: • Pay Details: Dependent on experience and qualifications, • Hourly Rate: $27.00 - $27.81, • Training Hourly Rate: varies according to hourly rate, • Commercial Learner's Permit (CLP) and Commercial Driver's License (CDL) training provided!, • Medical, Dental, Vision, & Life insurance or coverage options, • 401(k) Retirement Plan with company match., • Part-time, flexible schedule: Split shifts (AM/PM routes), weekdays only; No nights, weekends, holidays, or summers required., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues., • Community Impact: Be a trusted figure for students and families., • Employee Discount Program: Discounts on various products and services., • Guaranteed Minimum Hours: Get paid for 4 hours per day at minimum. Your day as a School Bus Driver will include: • Safely transport students to and from school and activities., • Supervise boarding and unloading at stops; assist students with seatbelts and mobility aids., • Maintain order on the bus to prevent distractions., • Conduct pre-trip and post-trip inspections (brakes, lights, tires, emergency exits)., • Report mechanical issues promptly and keep the bus clean and sanitary., • Obey all traffic laws and company safety standards., • Communicate with parents, school staff, and dispatch about student behavior or delays., • Demonstrate leadership and customer service skills. School Bus Driver Jobs are Perfect For: • Retirees looking for supplemental income, • Stay-at-home parents seeking daytime work, • Veterans transitioning into civilian roles, • Anyone seeking a second career or flexible job, • People who enjoy working with children You might be a good fit as a School Bus Driver if you: • Are at least 21 years old, • Have a valid driver's license for at least 3 years, • Are looking for a part-time schedule and summers off, • Enjoy working with students Note: This position is subject to DOT drug testing as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. Great School Bus Drivers often bring skills such as: • Valid Class B License, • History driving with ride share companies or taxi services, • Previous experience as a teacher, CDL driver, social worker, classroom assistant, hospitality worker, or customer service or retail associate. Take the wheel and drive your career forward with First Student! Make an impact in your community while enjoying flexible schedules, great pay, and unmatched support. *Sign-on bonus conditions apply. See location for details. Bonus offer is effective 9/30/2026. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description Fabrication Operator II - 7:00am - 7:00pm - $20.50/hr. Who we are looking for: We are currently looking for a Fabrication Operator to be based out of Binghamton NY. Reporting to Fabrication Manager, this person will be responsible for and have primary focus to safely bend standard sizes and radii of elbows/sweeps and safely package finished product in proper quantities for shipment, keep work area’s safe, clean & organized. The ideal candidate will have equivalent experience, and able to lift 50 pounds unassisted. Prior experience in a manufacturing environment is a plus. What you’ll do: Additional Responsibilities include, but are not limited to: • Complete QA and Work Order paperwork correctly and accurately, • Produce quality swedge and repair couplings that meet or exceed QA specifications, • Responsible for testing and measuring product to ensure that products are made in conformance with required specifications. The appearance of the end product must meet or exceed the requirements of the market, • Able to change out bell pins and strip plates, • Able to safely produce straight cuts on both the table saw and chop saw, • Accurately record scrap product, • Perform maintenance and cleanup for production and storage areas, • Know and follow plant safety rules and wear proper PPE (safety glasses, ear plugs, steel-toed shoes, gloves and hi-vis clothing), • All other assigned duties What you’ll bring: • 1-2 years related experience preferred, • Must be able to work safely and efficiently in a fast-paced work environment, • Able to lift 50 pounds unassisted, • Works as a positive team member that helps lift others to a higher level, • All associates must embrace and foster an environment that supports our core values of Accountability, Teamwork, Integrity, Respect and Excellence Within 3 months, you’ll: • Complete any required training, • Have developed relationships within the department., • Be well-versed in Fabrication strategic priorities and the importance of your role to daily operations. Who we are: Atkore is a six-time Great Place to Work© certified company and a four-time Top Workplaces USA award winner! We’re committed to creating an engaged and aligned workforce driven by a collaborative culture. We consistently live the Atkore mission, strategic priorities, and behaviors, consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith of the current pay for this position is $20.50/hr. Placement depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. • Benefits available include: Medical, vision, and dental insurance • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays, • Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis.

Job DescriptionMavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for a full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Binghamton, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Alignment Technician Automotive Alignment technicians use the latest equipment to align newly-mounted tires and wheels on customer's vehicles. By measuring and adjusting caster, camber, toe and thrust angles, our Automotive Alignment Technicians reduce customer's tire wear and ensure serviced vehicles travel straight and true. Mavis's Alignment Technicians also complete state-mandated inspections, oil and filter changes and flat repairs, and perform any other required automotive service or vehicle repairs to customer vehicles.Employee BenefitsAt Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement.QualificationsWe recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Alignment Technicians you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess 1 year of experience and/or training in dismounting, mounting, rotating and balancing tires or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position. In addition, it is preferred that Alignment Technicians possess a state inspection license.As an active position, Automotive Alignment Technicians are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle and tire maintenance and repair. Alignment Technicians must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW!Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995.For more information about Mavis, please visit www.mavis.com.Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Doctor of Medicine | Psychiatry - General/Other Location: Binghamton, NY Employer: Lancesoft Inc Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position Step into a long-term locum tenens opportunity for an Adult Psychiatrist in Binghamton, New York . This full-time inpatient assignment offers a consistent Monday–Friday schedule, approximately 20-patient caseload, and diverse psychiatric care across inpatient units. Ideal for a Board-Certified Psychiatrist seeking a stable locum travel assignment , this opportunity provides meaningful clinical exposure, multidisciplinary collaboration, and the potential for additional Physician On-Call coverage. Job Responsibilities Perform comprehensive psychiatric evaluations, diagnosis, and treatment planning. Manage medications and prescribe psychotropic medications. Participate in multidisciplinary treatment teams, case reviews, and treatment recommendations. Respond to psychiatric and medical emergencies and admit patients from hospitals, CPEP, and emergency departments. Participate in Clinical Reviews, Forensic Reviews, AOTs, TOOs, and 2PC documentation. Complete required OMH/GBHC documentation and attend daily morning hand-off meetings. Qualifications Board Certified Psychiatrist (ABPN). Active New York medical license. Must successfully complete GBHC credentialing and privileging. Working Hours Monday–Friday 8:00 AM–4:30 PM 40 hours/week Up to 40 Physician On-Call (POC) hours/week available . Full in-person new employee orientation required. Providers participating in on-call coverage must be willing to cover all inpatient units. Skills Adult inpatient psychiatry Psychiatric evaluation and diagnosis Treatment planning Medication management Psychotropic medication prescribing Emergency psychiatric care Multidisciplinary treatment collaboration Job Location Binghamton, New York

Job Description Lead with Purpose, Build with Pride—Join the CFE, Inc. Team as a Roofing Foreman! At CFE, Inc., we are a national leader in the commercial roofing industry, and we're looking for a dedicated Roofing Foreman to lead our teams in the safe and successful completion of projects. Your focus will be on safety, quality workmanship, team productivity, and customer satisfaction. If you're ready to lead projects with your hands-on expertise, we want to hear from you! Key Responsibilities: • Lead the team and coordinate the proper installation and repair of commercial roofing systems., • Collaborate in the development of project plans with the Project Manager and Field Superintendent., • Supervise, motivate, and train team members, ensuring adherence to safety standards and company procedures., • Plan, monitor, and evaluate team performance, providing guidance on application techniques, productivity, and proper use of tools and equipment., • Maintain communication with the client’s representatives, addressing concerns and ensuring customer satisfaction., • Manage and coordinate with subcontractors and other trades as required., • Stay up-to-date on manufacturer specifications and implement them across all relevant projects. Position Requirements: • Construction Supervision Experience: Proven experience as a roofing foreman or in a similar supervisory role.., • Specialized Skills: In-depth knowledge of roofing systems, materials, and techniques., • Technical Drawing (Blueprint) Proficiency: Ability to read and interpret technical drawings (blueprints), as it facilitates precise execution of each project., • Tools of the trade: Candidates are expected to provide their own hand tools necessary for completing tasks efficiently., • Willingness to travel: Candidates must be open to traveling to job sites., • Reliable transportation: Personal transportation is required to commute to and from various job sites. What We Offer: • Competitive Pay, • Bonuses tied to individual contributions and company success, • Paid Holidays and 3+ weeks of Paid Time Off, • Travel Incentives: Additional compensation for assignments requiring overnight stays, with room and board (per diem) provided., • Comprehensive Benefits: Medical, Dental, Vision, 401K Profit Sharing, Life Insurance., • Mileage Reimbursement, • Hands-On Safety and Skills Training, • Growth Opportunities: Advance your career with ongoing training, development, and clear pathways for promotion within the company. *PRE-EMPLOYMENT STATEMENT BY APPLYING FOR THIS POSITION I UNDERSTAND AND AGREE TO THE FOLLOWING: • If I accept an offer of employment, I will be required to submit to a drug screening before I am hired and at the discretion of the company after I am hired. I hereby consent to having the results of any such alcohol or drug screening I may be required to undergo disclosed to the company., • If I am offered and accept an offer of employment with CFE, Inc. that I will be required to complete a Post-Offer Medical Questionnaire before I am hired. I agree to complete the Post-Offer Medical Questionnaire truthfully and completely.

Job Description Material Handler II - $20.00/hr. - Days 7:00am-7:00pm Who we are looking for: Atkore, a recipient of a Great Place to Work© certification and a Top Workplaces USA award, is searching for a Material Handler to be based out of Binghamton, NY. Reporting to the Shift Lead, this person will be responsible for packaging product, monitor product for defects, assist in the startup or changeover of products, keep work area’s safe, clean & organized. The ideal candidate will have equivalent experience and able to lift 50 pounds unassisted. Prior experience in a manufacturing environment is a plus. What you’ll do: Additional Responsibilities include, but are not limited to: • Confirm product with schedule, • Assist with Quality Control duties including Monitor saw cuts, Pipe length, Bell fit, Print line confirmation, Chamfer/Bevel, and Reference line spacing, • Package finished pipe in proper crate quantities, • Weigh and transport finished product, • Cut crate boards to proper lengths and adjust if needed, • Process re-grind / scrap pipe, • Assist with the running of the PVC extrusion lines, • Help with changeovers and stringing the line downstream and through the saw, • Understand how to get pipe into specification, • Able to identify pipe products that are out of specification, • Perform maintenance and cleanup for production and storage areas., • Able to prioritize tasks effectively to manage time in order to be proficient with all material handling and packaging devices., • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • All associates must embrace and foster and environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability. What you’ll bring: • 1-2 years related experience preferred, • Excellent interpersonal and communications skills, • Good understanding of basic math required for quick and accurate counting and calculations, • Attention to detail, accuracy, time management, and organization, • Must be adaptable to changes in the work environment, comfortable with multiple competing demands and able to deal with frequent change, delays or unexpected events in a calm and logical manner, • Must be able to work safely and efficiently in a fast-paced work environment, • Able to lift 50 pounds unassisted, • Experience in lean manufacturing or business system-based company is a plus. Within 3 months, you’ll: • Complete any required training., • Have developed relationships within the department., • Be well-versed in strategic priorities and the importance of your role to daily operations. Who we are: Atkore is a six-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged and aligned workforce driven by a collaborative culture. We consistently live the Atkore mission, strategic priorities, and behaviors, consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $20.00/hr. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. • Benefits available include: Medical, vision, and dental insurance • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays, • Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis.

Job DescriptionThruway Fasteners, Inc. is one of the leading distributors of industrial products, supplying hundreds of original equipment manufacturers in 40 states and 28 countries. We help customers increase efficiency, drive growth, and rapidly respond to unique business challenges and opportunities. Thruway utilizes custom technology applications and vast industry specific knowledge to develop unique and flexible product management solutions. Headquartered in North Tonawanda, NY, Thruway has six branch locations across New York, Pennsylvania and Georgia. The Warehouse Associate is responsible for completion of all customers orders filled including; filling customer orders and delivering them to a delivery platform in a manner that meets company standards. Operate a forklift to pull and store bins in a neat and orderly manner. Safe operation of all equipment is the top priority of this position. This individual is a generalist that can perform all the duties of physically receiving, picking, packing, kitting, shipping and cycle-counting. Essential Functions • Receiving: upload incoming deliveries and complete a visual inspection for damage. Verify counts and items are correct and match up with the packing slips. Receive product into internal system, • Order picking: locate product in warehouse using picket ticket. Check product and verify quantity, • Packing Orders: ensure items picked are correct and package to customer's requirements. Label as required by customer, • Shipping: package shipments per customer's request. Coordinate with shipping companies to meet customer's request. Set up delivery schedule for in house deliveries, • Quality Control: ensure all orders are correct to customer's sizes and specifications (measure if required) check fit-form-function. Check that orders are accurate and free of any defects, • Package and weigh any orders to customer's requirements. Conduct physical inventories as required, • On a daily basis, inspect and do routine maintenance on equipment, • Takes care of trash and cardboard in work area to keep clean, • Reads, orders and makes a list to pull and put away bins in a fast but safe speed, • Uses the monthly check list to ensure forklift is in proper working condition Required Qualifications • Self-starter with outgoing personality, positive attitude, attention to detail, • Excellent communication skills including listening and reading comprehension, • Team-player who is willing to help others as needed, • Read and count accurately, • Professional demeanor and appearance, • Safely operate forklift and pallet jacks, • Prior warehouse experience is preferred, but not required, • PPE- Safety Gloves, • Possession a valid Driver's license Work Environment • Occasionally works near moving mechanical parts. The noise level in the work environment is moderate to loud, • Frequently required to use hands to finger, handle or feel objects, tools or controls and to climb or balance, • Regularly required to walk, stand, sit; reach with hands and arms; stoop, kneel, crouch; and talk or hear, • Ability to lift and move objects up to 50 pounds., • Specific vision abilities required include: close vision, peripheral vision, depth perception and the ability to focus, • Occasional travel at other Thruway or customer locations may be required Job Type: Full-time Schedule: Monday-Friday Day shift Location: Binghamton, New York Thruway Fasteners, Inc. offers a competitive and comprehensive benefit program with an employer contribution for eligible employees: • Medical plan options including a Co-Pay plan and High-Deductible Healthcare plans, • Dental (including orthodontic coverage for dependents up to age 19), • Vision plan with either Davis or VSP networks, • Company paid Basic Life, AD&D and State Disability, • Health Savings Account (HSA), • Voluntary life insurance, • Voluntary short-term and long-term disability, • Voluntary critical illness, accident insurance, theft & legal services, hospital indemnity, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • 401k retirement plan with employer match, • Employee Referral Program Thruway Fasteners, Inc. is an Equal Opportunity Employer committed to engaging a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. The chosen candidate must successfully pass pre-employment background check and drug screen.

Job DescriptionCertified Nurse Assistant (CNA) Certification Training Program Onondaga Community College Start Your Career in Healthcare with CNA Certification! Interested in becoming a Certified Nurse Assistant (CNA)? Through our partnership with Onondaga Community College, we're offering a paid CNA certification training program designed to help individuals earn their certification and begin a career in healthcare. Program Benefits Tuition Covered Paid Training Books & Materials Included Travel Reimbursement Post-Certification Career Counseling Training Information Start Date: Monday, October 19 Location: Onondaga Community College Who Should Apply? This program is ideal for individuals who: Are interested in becoming a Certified Nurse Assistant (CNA) Are motivated to begin a career in healthcare Can commit to attending the full training program Eligibility Requirements: Must be at least 17 years of age Must meet the specific requirements required by the school Applicants must reside in one of the following counties: Broome, Cayuga, Chemung, Chenango, Cortland, Delaware, Genesee, Livingston, Madison, Monroe, Onondaga, Ontario, Orleans, Schuyler, Seneca, Steuben, Tioga, Tompkins, Wayne, Wyoming and Yates What You'll Receive Upon successful completion of the program, you'll earn your CNA certification and receive career counseling to help you explore employment opportunities in the healthcare field.

Job Description Home Health Aide (HHA) / Personal Care Aide (PCA) Part-time or Per-diem 7pm-7am Job Summary: Vestal Park Rehabilitation and Nursing Center, a compassionate and dedicated healthcare organization, is seeking dedicated and caring Home Health Aides (HHAs) and Personal Care Aides (PCAs) to join our team! As a HHA/PCA, you will provide exceptional care and support to our residents, promoting their independence, dignity, and well-being. If you share our mission to "reach out with our hearts and touch the hearts of others," we encourage you to apply. Responsibilities: Administer medications and treatments as directed by physicians and update associated documentation Assist residents with activities of daily living, including personal care and hygiene Provide vital sign measurements and record vital signs as ordered by providers Assist residents with exercises, oxygen equipment, and ostomy care as needed Perform administrative tasks, such as completing necessary forms and reports Participate in facility surveys and inspections as required Provide personal assistance and respond to call bells or signaling calls Assist with activities, mealtime, and resident orientation Notify supervisors of any changes in resident status or medical needs Maintain confidentiality and adhere to all facility policies and procedures Requirements: Current and valid HHA Certificate or PCA At least 18 years of age Ability to read, understand, and follow resident care plans Strong communication and interpersonal skills Ability to work independently and as part of a team Reliable transportation and willingness to travel to resident locations (if applicable) Work Environment: Vestal Park Rehabilitation and Nursing Center is a state-of-the-art facility with a commitment to quality care and resident satisfaction Our team is dedicated to creating a warm, welcoming, and inclusive environment for our residents Opportunities for professional growth and development within a supportive and collaborative team Benefits: Competitive hourly rate of $19.05 Daily Pay option available How to Apply: If you are a motivated and compassionate individual who is passionate about providing exceptional care and support to others, we encourage you to apply. Please submit your application and join our team at Vestal Park Rehabilitation and Nursing Center. We look forward to hearing from you! Apply today and join our team in providing exceptional care and support to our residents! #upstate123

Job DescriptionClinical Social Worker Health Care Facility Surveyor - Maine (#1256): • CMS’s Long-Term Care Basic Training and SMQT certification are required., • Airline and hotel points accumulate for employee's personal use, • Employee discounts., • Employee retirement plan (401k) with a generous match and immediate vesting., • Company-paid tax-free Health Savings Account (HSA)., • Health insurance., • Dental insurance. Impact Recruiting Solutions is currently seeking a Clinical Social Worker Health Care Facility Surveyor to fill an opening with a Quality Improvement Consulting Company and will work in a technically exciting environment supporting internal and external customers nationwide. Requirements of the Clinical Social Worker Health Care Facility Surveyor: • Must have a Master's degree in Social Work., • Must have successfully completed CMS’s Long-Term Care Basic Training and passed the Surveyor Minimum Qualifications Test (SMQT)., • Must have at least two (2) years of recent experience working as a surveyor accrediting or certifying facilities that serve the residents of long-term care facilities., • Must maintain current licensure to practice as an LCSW., • Demonstrated a history of independent decision-making skills to direct and effectively manage the survey process., • Ability to set priorities independently and collectively in performing survey tasks., • Ability to openly discuss conflicts/controversy, and to seek assistance when appropriate to make decisions and resolve conflicts., • U.S. Citizenship is required for this position., • Ability to travel up to 75% of the time on a regular basis is required. Benefits of the Clinical Social Worker Health Care Facility Surveyor: • The salary for this position is $72,000 - $80,000 / yr., • This is a Full-time position (Monday - Friday)., • Flexible paid vacation days., • Paid holidays., • Company-issued and company-paid Amex card for travel., • All travel expenses paid directly by the company., • Airline and hotel points accumulate for employee's personal use., • Employee discounts., • Employee retirement plan (401k) with a generous match and immediate vesting., • Company-paid tax-free Health Savings Account (HSA)., • Health insurance., • Dental insurance., • Vision insurance., • Company-paid life insurance., • Company-paid disability insurance., • Extensive training opportunity., • Predictable work schedule.

Job Description JOB TITLE (#1306): Registered Dietitian Health Care Facility Surveyor - Maine CMS's Long-Term Care Basic Training and SMQT certification are required Impact Recruiting Solutions is currently seeking a Registered Dietitian Health Care Facility Surveyor to fill an opening with a Quality Improvement Consulting Company and will work in a technically exciting environment supporting internal and external customers nationwide Requirements of the Registered Dietitian Health Care Facility Surveyor: • Must have an Associate or Bachelor's degree in Dietetics, • Must have successfully completed CMS's Long-Term Care Basic Training and passed the Surveyor Minimum Qualifications Test (SMQT)., • Must have at least two (2) years of recent experience working as a surveyor accrediting or certifying facilities that serve the residents of long-term care facilities., • Must maintain current licensure to practice as a Registered Dietitian, • Demonstrated history of independent decision-making skills to direct and effectively manage the survey process., • Ability to set priorities independently and collectively in performing survey tasks., • Ability to openly discuss conflicts/controversy, and to seek assistance when appropriate to make decisions and resolve conflicts., • U.S. Citizenship is required for this position, • Ability to travel up to 75% of the time on a regular basis is required. Compensation and Benefits of the Registered Dietitian Health Care Facility Surveyor: • The salary for this position is competitive and negotiable, • This is a Full-time position (Monday - Friday), • Flexible paid vacation days, • Paid holidays, • Company-issued and company-paid Amex card for travel, • All travel expenses paid directly by the company, • Airline and hotel points accumulate for employee's personal use, • Employee discounts, • Employee retirement plan (401k) with a generous match and immediate vesting, • Company-paid tax-free Health Savings Account (HSA), • Health insurance, • Dental insurance, • Vision insurance, • Company-paid life insurance, • Company-paid disability insurance, • Extensive training opportunity, • Predictable work schedule If you would like to learn more about other opportunities we offer, please call our office: (607) 478 1810 or submit your Resume/CV to hr@irecruitings.com

Job Description POSITION SUMMARY Reporting to the Manager of Revenue Integrity & Compliance, the SCN Billing Specialist for Care Compass Collaborative is responsible for managing the billing and reimbursement processes for services delivered under the New York Health Equity Reform (NYHER) 1115 Waiver. This includes ensuring accurate and timely submission of claims for Health-Related Social Needs (HRSN) services such as housing, nutrition, transportation, and care management. The Billing Specialist will work closely with the Revenue Cycle Team to ensure compliance with state and federal billing guidelines. RESPONSIBILITIES: The responsibilities of the SCN Billing Specialist will include the following: Essential Functions: • Prepare and submit claims for HRSN services in accordance with NYSDOH billing protocols and SCN Operations Manual, • Verify member eligibility and service authorization using Medicaid data systems and SCN IT platforms, • Track and reconcile payments, denials, and resubmissions; follow up on unpaid or underpaid claims, • Maintain accurate billing records and documentation for audit readiness, • Collaborate with Social Care Navigators, care managers, and provider agencies to resolve billing discrepancies, • Stay current on NYHER 1115 Waiver updates, billing codes, and reimbursement policies, • Participate in training sessions and stakeholder meetings to align billing practices with evolving SCN requirements Non-Essential Functions: May assume additional responsibilities, as requested. MINIMUM REQUIREMENTS: • High School Diploma and 2 years’ experience required or Associate’s degree in Health Administration, Accounting, or related field, preferred, • Minimum 2 years of experience in Medicaid billing, preferably in a community-based or managed care setting, • Proficiency in billing software, Medicaid portals, and electronic health record (EHR) systems, • Strong attention to detail, organizational skills, and ability to manage multiple priorities, • Excellent communication and critical thinking skills, • Working knowledge of Microsoft Office 365 LICENSE/CERTIFICATION: • Minimum Required: N/A PREFERRED SKILLS: • Knowledge of NYS Medicaid Managed Care billing requirements, • Familiarity with 1115 Waiver programs, HRSN services, and SCN workflows is highly desirable, • Experience with Unite Us or similar referral platforms used in SCN operations, such as MillinPro, • Understanding of social determinants of health and community-based service delivery, • Knowledge of NYS OMH, OASAS, and OPWDD or other rate-based billing is a plus WORK ENVIRONMENT: • Care Compass Network utilizes a hybrid work model where employees are able to work remotely from a home office or from the CCN office, a non-clinical professional office setting. There may be some travel required for partner and/or network meetings.

Job Description Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers. Foth is currently seeking a team-focused, innovative, and results-oriented Lead Process Engineer who has a desire to contribute to our clients’ success and is looking for new learning experiences and opportunities for career growth. This role supports projects based out of Foth’s Mehoopany, Pennsylvania office, working with a long‑term, stable client relationship that has been in place for many years. To maintain strong collaboration and client connection, the successful candidate will be onsite one to two days per week. Foth is committed to supporting this arrangement and will cover hotel accommodations for required onsite days, allowing us to consider qualified candidates who live outside the immediate area. Primary Responsibilities: • Lead and support the process mechanical design effort on projects, • Hold team members accountable to quality work product, • Perform QAQC of engineering and design deliverables, • Support business development and proposal activities which will include concepts, deliverables, effort hours, and estimated cost, • Interface with clients and vendors on a regular basis, • Work in a manufacturing environment to gather field data and conduct field investigations when required for project work, • Generate equipment specifications and construction documents/packages, • Work as part of a collaborative project team with contractors and client, • Review vendor submittals, lead design reviews, both internally and with vendor/client, • Travel as required to client sites and vendors for work (up to 25%) Required Qualifications:, • Bachelor’s degree in mechanical or chemical engineering or equivalent technical experience, • 10+ years of process engineering experience, • Demonstrated experience leading and managing teams of engineers, designers, contractors, construction managers, vendors, and OEM’s Required previous experience with the following:, • P&ID’s, • Preparation of installation, bid, and construction packages, • Process and utility system piping design, • Paper making technology (towel and tissue), • Cost estimating (labor hours and capital cost estimates), • Construction support and commissioning experience Preferred Qualifications:, • 15+ years of industry-relevant experience, • Professional Engineer (PE) license or ability to obtain within 24 months of your start date Preferred experience with the following:, • Paper making process operating knowledge (pulping through converting), • Familiarity with 3D project execution, • Industrial HVAC - specifically room air balancing, • Pipe stress analysis, • Thru air drying (TAD) or other advanced papermaking technologies, • Familiarity with PHA’s (Process Hazard Analysis), • Yankee drying systems including steam and condensate, • Trim and broke handling, • Dust control and collection Process air, • Chemical additive and material handling system design All Foth Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Qualified women, minorities, persons with disabilities, and veterans are encouraged to apply. All locations are tobacco-free. Subject to applicable state law, all applicants who have received a written offer of employment and a copy of Foth’s Drug and Alcohol-Free Workplace Program Policy, will be required to undergo testing for commonly abused controlled substances. Applicants must complete the required drug testing within two business days of offer acceptance. Foth will pay for all drug testing, which will be conducted by a licensed independent medical laboratory that follows testing requirements in accordance with applicable state law. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies. Artificial Intelligence: Foth uses artificial intelligence and other technology-assisted tools in connection with parts of our recruiting and hiring process, including to assist with reviewing application materials, identifying potentially qualified candidates, sourcing candidates, and supporting interview preparation. These tools are used to support, but do not replace, human decision-making, and all employment decisions are made by qualified human reviewers. Where required by law, we will provide additional information regarding the use of these tools, and applicants may contact us with questions or request reasonable accommodation regarding their use.

Job DescriptionBenefits: • Employee discounts, • Flexible schedule, • Free uniforms Want to work for an exciting company with an incredible and never ending appetite for growth? We are a rapidly growing aquarium and aviary service company. Our customers look to us to create a very serene and engaging environment for their residents/customers to enjoy. This particular role will primarily be servicing of aquariums and aviaries in nursing homes and assisted livings facilities. This is an entry level position that requires basic knowledge of hand tools and assembly. Lifting, bending, and some physical demands are involved in the position. This is a part-time remote position. Work is typically done during business hours of 8am to 7pm but is flexible. Hours will vary from month to month but will average around 5-15 hours per month. Hours are dependent upon services due and may vary. *Travel in a 150 mile radius of Binghamton, NY will be required. Currently Penn Yann (95 miles) & Oxford (35 miles) (Mileage reimbursement is paid while driving. Hourly Wage is not paid during driving) *Cities will include Oxford | NY Penn Yan | NY *Due to work being performed in long term care homes, Covid-19 vaccine or masking/goggles may be required. Storing 50# bags of bedding and seed along with 4-5 27 gallon totes of supplies will be required for the job. Major position responsibilities • Well organized and possess excellent time management skills, • Professional appearance with excellent communication skills, • Effectively communicate company products and services, • Able to prioritize and handle multiple tasks, • Inner drive and desire to exceed goals, • Respond to calls, emails, faxes to take care of customer needs, • Able to make an efficient work schedule, • Manage service cycle for customer baseRequired education, skills, abilities, and experience, • Experience in fish keeping and or bird keeping preferred, • Great attitude and willingness to learn., • Ability to continually adjust priorities to match the business need., • Strong work ethic along with being on time and maintaining good attendance., • Ability to successfully communicate and contribute in a team oriented environment., • Must have the ability to comprehend and follow instructions and to read and write in English., • Preference given to candidates with mechanical aptitude., • Willingness to be flexible with schedule and job responsibilities., • Able to travel in your service area radius, • Heavy lifting and maneuvering is required., • Flexibility is a must!, • High School education is preferred., • Driver’s License requiredJob Type: Part-time Pay: From $25.00 per hour Expected hours: 5-15 hours per month Benefits: • Flexible scheduleShift:, • Day shift

Job Description$3,800 - $4,000/Week | Audiologist Travel Contract (NY) Stop choosing between a high paycheck and a high cost of living. This 13-week locum contract in New Yorks Southern Tier offers NYC-level rates with local expenses that actually let you save. The Sweet Spot of Clinical Care Work in a "boutique" clinical setting that feels like a private practice but has the backing of a major medical campus. • Prime Location: Modern medical office building directly across from the NICU., • Elite Collaboration: Youre across the hall from the ENT teamno more playing phone tag with doctors., • Diverse Scope: From newborn screenings (ABR/OAE) and vestibular diagnostics to adult rehab.Why Youll Love It Here, • The Pay: $3.8k - $4k/week (including max tax-free stipends)., • The Schedule: M-F, 8a5p. No weekends. No holidays. No on-call., • The Lifestyle: Low-cost housing means more money in your pocket., • The Perks: Spend your weekends in the Finger Lakes (1hr), Ithaca (1hr), or take a quick trip into NYC (3hrs).What You Need, • Au.D. or Masters in Audiology., • 1+ year of clinical/hospital experience., • NYS License (Must have by start date, but not required to be submitted Ready to maximize your earnings this Spring? If so, Call or Text Carlo at 954-361-7449 for immediate response. Or Click Applied and send your resume to carlo@palmcareers.com

Job Description The Role - Amphenol Commercial Air is seeking a Test Engineer to work out of its new facility in Endicott, NY. The Test Engineer works with design engineers and test lab personnel to develop test plans, testing setups and perform testing on products and new product applications. Applies sound engineering techniques and practices in performing assigned tasks. The key responsibilities of the Test Engineer include, but are not limited to: • Perform routine and customized machinal and electrical tests on electrical connector and cable assemblies., • Specializing in high voltage (partial discharge) testing and high current (heat rise) testing with the ability to analyze results., • Enhance and develop test procedures for products and new product applications., • Write and review technical memos and engineering reports., • Assist with failure analysis of products under test., • Work with design engineers and design application engineers to develop test plans., • Research equipment, procedural and software enhancements., • Work with outside labs, sister divisions and industry standard committees as necessary. Location • Endicott, NY Salary: $62,354 - $85,000 The Person - The key skills and qualities of a Test Engineer at Amphenol Commercial Air: • Bachelor's Degree in a related Engineering discipline plus a minimum of 2 - 4 years of applicable work experience. An equivalent of education and qualifying experience is acceptable., • Requires a thorough working knowledge of engineering principles as applied to electrical connectors., • Requires a thorough understanding of high voltage and high current electrical principles. Partial discharge and heat rise testing experience is preferred., • Needs to be familiar with Military Specifications/Standards, Industry Standard test methods and equipment for connectors. (ex. EIA-364/ DO-160, EN2591, or similar), • The candidate must be organized, self-motivated, proficient in Microsoft Office Suite and capable of learning and using Amphenol's operating programs., • Physical demands of the job are sitting and typing. Job requires some minor lifting., • Travel as necessary; up to 10% of the time The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job DescriptionCT Technologist Location: New York, NY Duration: 9 Weeks Schedule: Monday–Friday, 12:00 AM–8:00 AM Travel Gross Weekly: $2,900–$3,100/week (based on experience) Local Rate: $75–$80/hour (based on experience) Position Overview We are seeking an experienced CT Technologist to perform computed tomography procedures according to established protocols while ensuring high-quality diagnostic imaging, patient safety, and compliance with radiation safety standards. Schedule Note: This is an overnight position. The technologist must be CT certified and injection certified. The position may also require performing general X-ray procedures during the overnight shift. Job Responsibilities • Perform CT imaging procedures according to prescribed protocols to ensure accuracy and consistency., • Select and utilize appropriate kV and mA techniques to produce high-quality diagnostic CT images., • Perform daily quality-control and equipment calibration checks before conducting patient examinations., • Assess and respond appropriately to patient needs before, during, and after radiology procedures., • Administer contrast agents to patients as ordered by the physician and in accordance with established protocols., • Verify patient information, procedure requirements, and applicable safety protocols prior to contrast administration., • Perform required quality-control, quality-assurance, and safety testing., • Follow radiation safety practices and the ALARA (As Low As Reasonably Achievable) principle., • Maintain accurate department documentation, including logs, manuals, charge documents, and equipment-related reports., • Report equipment malfunctions and other technical issues promptly to the appropriate personnel., • Maintain, retrieve, and transmit patient imaging data for radiologist interpretation., • Ensure all imaging studies are properly documented and available for interpretation., • Perform general X-ray procedures when required during overnight coverage., • Maintain compliance with applicable departmental policies, regulatory requirements, and safety standards., • Perform other related duties as assigned.Required Skills, • Strong knowledge of CT imaging procedures and protocols., • Ability to perform CT examinations accurately and efficiently., • Strong understanding of radiation safety practices and ALARA principles., • Ability to assess patient needs and respond appropriately throughout the imaging process., • CT certification required., • Contrast/injection certification required., • Ability to work independently during overnight shifts.Required Education, • Graduate of a JRCERT-approved School of Radiologic Technology.Required Certifications & Licensure, • Current New York State License – Licensed Radiologic Technologist (LRT)., • ARRT Certification., • BLS Certification – American Heart Association (AHA).

Job Description Coates Field Service, Inc. is seeking an experienced Right of Way Agent to support a client’s distribution and transmission. The successful candidate will be experienced in acquiring linear right of way for private landowners, and able to adapt to tight deadlines in order to meet project deliverables. The office location is near Binghamton or Elmira, NY. Per Diem is Available Multiple positions available. Primary Job Duties & Responsibilities: • Investigate, negotiate, acquire, defend, and ensure legal recording and enforcement of property rights required for electric, gas, or communication infrastructure, • Utilize existing and future software and physical files to document all communication with landowners including in-person meetings, email, and phone in addition to capturing project updates and progress on each affected parcel, • Engages landowners to mitigate encroachments on rights of way, • Prepare or assist in preparing and securing specific state, highway, railroad, County, Town, City, Village permits for use of lands owned by governmental agencies, the public or other utilities including tree-clearing permits., • Investigate, negotiate, and acquire leases, licenses, and permits for Networks infrastructure, staging areas for storm or construction lay down areas, railroads & canals crossing permits, • Responsible for document management involving legal documents filing, recording, parceling & indexing and retrieval, • Coordinate and process payments to landowners for certain property rights through internal workflow, • Investigate electric and gas franchise agreements and boundary lines, • Obtains right of entry and survey permission from private landowners., • Potentially negotiates and acquires property rights required for transmission and distribution projects., • Responds to internal and external stakeholder inquiries in matters related to property rights., • Reviews and processes executed documents according to client requirements; may include requesting payment remittance, recording, etc., • Serves as legal witness as necessary for condemnation or other proceedings., • Preferably sales and leasing experience along with commercial real estate, • Other job duties and responsibilities as assigned. Knowledge, Skills & Abilities: Required: • Knowledge of real estate principles gained through education and experience, • Must have NY Notary Public License or have the ability to obtain that license within 3 months of hiring Preferred: • Working knowledge of drafting and negotiating property rights documents including rights-of-way, easements, leases, purchases, and sale agreements., • Strong understanding of electric transmission, sub-transmission, and distribution principles as related to right-of-way and land rights., • Excellent written and verbal communication skills., • Strong negotiation and interpersonal skills., • Ability to utilize multiple forms of technology including project databases, Microsoft Office Suite, Google Earth, etc., • Ability to plot metes and bounds descriptions of property and read a variety of maps, electronic and paper., • Ability to evaluate, interpret, and analyze engineering and right-of-way drawings., • Ability to interpret and research (abstract) legal documents., • Skilled in property rights research methods, including courthouse searches for recorded documents and internet research of same., • Ability to determine valuation of crops, timber, etc. for damage settlement., • Ability to travel regularly. Right of Way Agents may have prior experience as attorneys, paralegals, real estate, or land professionals, working in industries such as electric utility power or communication companies, pipeline, engineering firms or government agencies specializing in land development. Coates has a 75-year history providing comprehensive land acquisition and right of way services to municipalities, utilities, energy providers, and oil and gas companies nationwide. The first firm of its kind, we are widely recognized as a leader in the land and right of way acquisition industry. A national corporation, Coates has the depth of knowledge and the agility to respond to client needs in all 50 states. Coates is headquartered in Oklahoma City, Oklahoma, with regional offices located throughout the United States. It is our mission to provide professional, high-quality, cost-efficient land acquisition and right-of-way services our clients need, when and where they need us. Coates is committed to rewarding the loyalty of the national team of Coates’ Employees. Coates hires the best candidates available for all positions, without regard to the individual's race, religion, or sexual preference or orientation. Coates is an Equal Opportunity Employer (EOE). Coates offers a comprehensive and generous benefits package, including medical/dental, vision, STD/LTD, life insurance, paid time off, company paid holidays, and more!

Job Description About LASMNY The Legal Aid Society of Mid-New York, Inc. (LASMNY) is a non-profit public interest law firm that provides free legal information, advice and representation to people who are unable to afford a lawyer. Our staff provides services in thirteen counties: Broome, Chenango, Cayuga, Cortland, Delaware, Herkimer, Jefferson, Lewis, Madison, Oneida, Onondaga, Oswego, and Otsego. In addition, our Agricultural Worker Project (AWP) provides services to agricultural workers throughout New York State. Mission Statement LASMNY’s mission is to provide free legal assistance to low-income individuals facing civil legal issues that impact basic needs such as housing, safety, income, and healthcare. We are committed to protecting the rights of vulnerable populations including seniors, veterans, people with disabilities, immigrants, and survivors of domestic violence. Job Summary The Tenant Defense Project helps tenants across Central New York, the Mohawk Valley, and the Southern Tier maintain safe, healthy, and stable housing. This position is part of a new early intervention team funded by the New York State Unified Court System through its Judiciary Civil Legal Services program. The work is primarily out of court. The attorney reaches tenants before an eviction petition is filed, or as early in a pending matter as possible, and resolves the underlying problem through negotiation, rental assistance, and administrative advocacy. The Staff Attorney will negotiate directly with landlords, property managers, and their counsel, represent tenants in administrative hearings and appeals involving subsidized housing and public benefits, advocate with housing authorities and code enforcement on habitability and reasonable accommodation issues, and provide advice and limited-scope assistance to tenants at the pre-litigation stage. Court appearances are a limited part of this role. Matters that require contested litigation are generally referred to the court representation team, though the attorney may appear when a matter cannot be resolved outside court or when emergency relief is needed. LASMNY is filling two positions. The Utica position serves Oneida and Lewis Counties in the Fifth Judicial District and Madison and Delaware Counties in the Sixth Judicial District. The Binghamton position serves Broome, Chenango, and Otsego Counties in the Sixth Judicial District. Both positions require regular travel throughout the assigned counties. Applicants should indicate which office they are applying for. Essential Job Duties • Engage tenants at the earliest point of housing instability, including after a rent demand, notice to cure, notice of termination, or notice of nonrenewal, and before a petition is filed., • Negotiate with landlords, property managers, and opposing counsel to resolve rent arrears, habitability conditions, and lease disputes without court involvement., • Coordinate rental assistance, utility assistance, housing subsidies, and public benefits, working with the Client Services Coordinator to resolve the conditions that drive housing loss., • Represent tenants in administrative proceedings, including Section 8 and Housing Choice Voucher terminations, public housing lease terminations, subsidy recertification and repayment disputes, and informal hearings before housing authorities and administering agencies., • Advocate with housing authorities, subsidy administrators, property managers, and code enforcement on repairs, habitability conditions, and reasonable accommodation requests under fair housing law., • Represent tenants in public benefits matters that bear directly on housing stability, including emergency assistance and rental arrears denials, and request fair hearings where appropriate., • Prepare clients to testify at administrative hearings., • Draft demand letters, negotiation correspondence, hearing requests, administrative appeals, and settlement and payment agreements., • Advise tenants on their rights and options at the pre-litigation stage and provide limited-scope assistance, including help preparing an answer or requesting an adjournment., • Provide same-day consultation in urgent matters, including illegal lockouts, utility shutoffs, and imminent warrant execution, and coordinate referral to the court representation team where litigation is required., • Appear in City, Town, and Village Courts on a limited basis when a matter cannot be resolved outside court or when emergency relief is needed., • Conduct legal research and stay current on landlord-tenant law, subsidy program rules, and eviction prevention strategies., • Deliver Know Your Rights presentations and train caseworkers, advocates, Office for the Aging and Department of Social Services staff, and other providers who work with tenants., • Assist with intake at off-site locations, including during evening hours, to ensure accessibility for clients., • Maintain accurate, timely, and complete case and time records in the case management system in compliance with LSC regulations, LASMNY policies, and grant reporting requirements., • Collaborate with partner organizations, pro bono attorneys, and other stakeholders, and serve as an ambassador for LASMNY in the community., • Participate in staff meetings, trainings, and case consultations., • Exhibit a strong commitment to advancing the mission of LASMNY.Professional Standards, • Demonstrate the highest level of professionalism when handling confidential and sensitive client information., • Communicate effectively and courteously with clients, attorneys, court personnel, agency staff, and community partners., • Maintain regular and predictable attendance in accordance with organizational policies., • Adapt to new technologies and systems, including legal research tools and case management software., • Comply with all Legal Services Corporation regulations, LASMNY policies and procedures, and grant-based reporting requirements., • Perform additional responsibilities and duties as assigned by a supervisor based on agency needs.Required Qualifications, • Juris Doctor (J.D.) or Master of Laws (LL.M.) from an accredited law school., • Eligible for admission to practice law in New York State. Law school graduates registered for the New York State Bar Exam, or eligible for admission on motion, are encouraged to apply., • Valid New York State driver license and access to reliable transportation, with the ability to travel regularly to client meetings, agency hearings, and community sites throughout the assigned counties., • Excellent written, analytical, organizational, and oral advocacy skills., • Demonstrated commitment to public interest law and serving communities facing systemic barriers to justice., • Ability to work independently, as well as collaboratively, and manage a high volume of matters.Preferred Qualifications, • Admission to practice law in New York State with zero to five years of experience., • Experience in landlord-tenant law., • Experience negotiating with landlords, property managers, or opposing counsel., • Experience with administrative hearings, including subsidized housing terminations or public benefits appeals., • Familiarity with rental assistance programs, Section 8 and Housing Choice Voucher programs, public housing, and utility assistance., • Proficiency in languages other than English.Compensation and Benefits This position offers a competitive salary on the LASMNY non-union salary scale, starting at $84,240.00 for law graduates pending admission and $86,400.00 for admitted attorneys, up to $96,294.00 for attorneys with five years of experience. Placement on the scale is based on years of relevant experience. LASMNY provides a comprehensive benefits package, including health insurance, retirement contributions, paid leave, and professional development opportunities. LASMNY is a qualifying employer for the federal Public Service Loan Forgiveness program. Application Process Qualified candidates are invited to apply through our online application system. Click on the following link to apply: https://workforcenow.adp.com/. Equal Opportunity Employer LASMNY is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable law. LASMNY provides reasonable accommodations to qualified individuals with disabilities during the application process. Please contact Human Resources to request assistance. Visit our website | lasmny.org

Job Description Seeking Compassionate Travel Respiratory Therapist for SUNY Upstate Medical University! We are dedicated to connecting passionate Respiratory Therapist with opportunities that align with their lifestyle and professional goals. We believe that strong, ongoing relationships with our partnered facilities are key to delivering exceptional care. Our team works closely with providers to understand their unique needs, ensuring you’re always placed in a role that supports both your growth and their care requirements. Hourly Pay Rate: $59 *Rate includes $202 daily tax-exempt stipend Responsibilities: · Provide efficient evaluations to assist physician in creating or updating patient’s Plan of Care. · Assess modalities of respiratory therapy, recommend changes, including improvements appropriate to the delivery of respiratory care. · Provide emergency airway management when necessary. Requirements: · Current NY RT License and Registration · CPR-BLS Certification required

Job Description Seeking Compassionate Travel Radiologic Technologist for SUNY Upstate Medical University! We are dedicated to connecting passionate Radiologic Technologist with opportunities that align with their lifestyle and professional goals. We believe that strong, ongoing relationships with our partnered facilities are key to delivering exceptional care. Our team works closely with providers to understand their unique needs, ensuring you’re always placed in a role that supports both your growth and their care requirements. Hourly Pay Rate: $70 *Rate includes $202 daily tax-exempt stipend Requirements: • One year experience as a Radiologic Technologist required, • AAS in Radiologic Technology or equivalent, NYS license/registration and ARRT (must obtain within 1 year of appointment), • Must have a limited permit if NYS License/Registration hasn't been obtained yet., • CPR Certified Responsibilities: • Collaborate closely with radiologists, physicians, and other healthcare professionals to ensure accurate diagnoses and effective treatment plans., • Ensure patients are positioned correctly for optimal image quality and provide patient care, explaining procedures and answering questions, • Practice radiation safety and protection to minimize patient exposure, • Provide radiologic examinations based on the needs of referring physicians and radiologists

Job Description Triple Cities Metal Finishing is seeking a hands-on Health & Safety Manager to lead and personally execute the Company's health, safety, housekeeping (5S), and environmental compliance initiatives across multiple manufacturing facilities. The primary responsibility of this position is to create and maintain safe workplaces, ensure regulatory compliance, reduce risk, and foster a strong safety culture by working directly alongside employees, supervisors, and leadership throughout our operations. As our health and safety programs continue to mature, this role will identify and lead opportunities to improve workplace organization, housekeeping (5S), visual management, and continuous improvement initiatives that support safer and more efficient manufacturing operations. This is not solely an administrative or compliance position. The successful candidate will spend significant time on the manufacturing floor building relationships, coaching employees, implementing practical improvements, and helping create a culture where safety, accountability, and continuous improvement become part of everyday operations. While the responsibilities below represent the primary functions of the position, this role will continually identify and implement opportunities to improve safety, housekeeping, operational efficiency, and regulatory compliance. Key responsibilities include, but are not limited to, the following: Health, Safety & Workplace Organization • Personally develop, implement, maintain, and continuously improve the Company's health and safety programs across multiple manufacturing facilities., • Build a culture where safety, housekeeping, organization, and accountability are fundamental responsibilities of every employee., • Spend significant time on the production floor identifying opportunities to improve safety, efficiency, and workplace organization., • Standardize safety and housekeeping practices across all company locations. Housekeeping (5S) & Continuous Improvement • As the Company's safety programs continue to mature, identify and lead opportunities to improve workplace organization, housekeeping (5S), visual management, and operational efficiency across all facilities., • Develop organized work areas using visual management, standardized storage locations, labeling systems, shadow boards, floor markings, and workplace organization techniques., • Perform routine housekeeping inspections and correct deficiencies whenever practical., • Work directly with employees to reorganize work areas, remove unnecessary materials, improve layouts, and eliminate clutter., • Reduce unnecessary employee movement, trip hazards, blocked aisles, and inefficient work areas through continuous improvement. Regulatory Compliance & Environmental Programs • Maintain compliance with OSHA, EPA, and all applicable federal, state, and local regulations., • Prepare, maintain, and submit environmental reports including wastewater, air emissions, hazardous waste, permits, inspections, and regulatory documentation., • Maintain environmental compliance systems and support future ISO 14001 initiatives if implemented., • Serve as the primary point of contact during environmental inspections and regulatory interactions. Safety Inspections & Risk Reduction • Perform routine safety inspections throughout all facilities., • Identify unsafe conditions and implement corrective actions whenever practical., • Conduct machine guarding, chemical handling, PPE, ergonomic, and facility safety inspections., • Follow corrective actions through completion. Incident Investigation & Documentation • Personally investigate workplace injuries, incidents, near misses, environmental events, and property damage., • Determine root causes and implement corrective and preventive actions., • Maintain OSHA logs, training records, inspection reports, and compliance documentation. Training & Safety Culture • Conduct hands-on safety training and coaching on the production floor., • Develop practical training programs and emergency response procedures., • Promote employee involvement and continuous improvement in safety. Safety & Continuous Improvement Committees • Support and facilitate Safety & Continuous Improvement Committees at each facility to encourage employee involvement, reinforce safe work practices, and identify opportunities for workplace improvements., • Develop meeting agendas, facility inspection schedules, action-item tracking, and follow-up processes., • Conduct regular committee meetings focused on safety performance, housekeeping (5S), workplace organization, near misses, environmental observations, employee suggestions, and continuous improvement opportunities. Operational Partnership • Work alongside Plant Managers, Maintenance, and Operations to improve workplace safety, organization, and efficiency., • Assist supervisors in correcting unsafe conditions and sustaining housekeeping standards., • Support internal audits and continuous improvement initiatives across all facilities. Our Philosophy We believe an organized workplace is a safe workplace. Excellent housekeeping, visual organization, standardized work areas, and continuous improvement are essential components of our safety culture. The Health & Safety Manager will be expected to personally drive these initiatives, build practical systems that sustain them, and develop employees throughout the organization who take ownership of maintaining safe, clean, organized, and efficient workplaces. Qualifications Education • Bachelor's degree in Occupational Health & Safety, Environmental Science, Engineering, Industrial Technology, Manufacturing, or a related field is preferred. Equivalent combinations of education, technical training, and relevant work experience will also be considered. Experience • Three to five years of experience in a health and safety, environmental, manufacturing, operations, maintenance, quality, continuous improvement, or related role is preferred., • Experience working in a manufacturing, industrial, metal finishing, chemical processing, plating, or similar production environment is preferred., • Experience implementing workplace safety programs, conducting inspections, leading continuous improvement initiatives, or developing 5S programs is preferred., • Experience working across multiple facilities or supporting multiple departments is a plus., • Familiarity with OSHA, EPA, NFPA, and other applicable health, safety, and environmental regulations is preferred. Certifications • OSHA 30-Hour General Industry certification is preferred or must be obtained within 12 months of hire., • HAZWOPER 40-hour training is preferred. Company-sponsored training will be provided if required for the position., • Professional certifications such as CSP, ASP, CIH, CHMM, OHST, CHST, Lean Six Sigma, or similar credentials are considered an asset but are not required., • We are committed to investing in employee development and will provide training opportunities to support continued professional growth. Skills & Requirements • Strong multi-site leadership, project management, and communication skills., • Ability to identify trends and use data to improve workplace safety and reduce risk., • Experience using Microsoft Office and the ability to learn safety management systems and compliance software., • Flexibility and willingness to travel regularly between assigned regional facilities. We recognize that exceptional candidates may not meet every preferred qualification listed above. If you are passionate about workplace safety, continuous improvement, and building a positive safety culture, we encourage you to apply. We are committed to investing in the right individual through ongoing training and professional development. Total Compensation Package Wage This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $80,000 to $100,000, commensurate with experience and qualifications. C.H. Thompson provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future. Benefits We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in a variety of benefits including: • Paid Holidays, • Paid Vacation / Sick Time, • 401(k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance, and Life Insurance, • Free Fountain Soda Machine On-site! Why Join Our Team? • Opportunity to build and grow our health & safety program., • Hands-on role with direct impact across multiple manufacturing facilities., • Company-paid professional development and certifications., • Work directly with company leadership., • Stable, family-owned manufacturing organization., • Opportunity to expand into operational excellence and continuous improvement as the program evolves. Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description The Role Amphenol Military High Speed is seeking a Director, Product Management & Business Development to work out of its new office space in Endicott, NY. The Director, Product Management & Business Development plays a key role in setting the business unit's strategic direction for product development and market / target identification. As such, the position requires a forward looking individual who can effectively translate customer demands and market trends into an effective, internal capture plan. The key responsibilities of this Director, Product Management & Business Development include, but are not limited to: • Review and map key market segments and sub-segments, • Identify and map key OEM's and subcontractors, • Define Amphenol product position within the Military High Speed market and identify resulting opportunities / gaps for new or legacy product expansion, • Define and implement a strategy to fill product, program and technology gaps through product development, positioning or acquisition, • Maintain current knowledge of market trends, new program activities, technology developments and industry committee activities, • Establish targets for the Amphenol sales team, product marketing and design / development engineering, • Promote opportunity specific products to the broader aerospace market / customer base, • Set strategy and drive the strategy process, • Responsible for setting a clear vision and goals for a team of marketing and business development professionals; lead, develop, and continue to build that team Location • Endicott, NY Salary: $130,000 to $170,000 The Person The key skills and qualities of a Director, Product Management & Business Development at Amphenol Military High Speed: • Bachelor's Degree in Engineering, Marketing, or Business. MBA or advanced degree preferred, • Minimum of 10 years of direct engineering, marketing or sales experience along with cable manufacturing, copper, and/or fiber optics experience within the military industry, • Previous experience leading people is required, • Excellent interpersonal skills with a proven record of translating customer requirements into development expectations – price, position, product, • Strong business and technical aptitude, • Working knowledge of Microsoft Excel, PowerPoint and Project, • Excellent communication skills (written and verbal), • Prolonged periods of sitting, typing, and other computer related work, • The ability to travel frequently domestically and internationally as required The Company With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed specializes in rugged high speed connectors, cables, assemblies, ethernet switches, media converters, and more in copper, fiber, or both. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role - Amphenol Commercial Air is seeking a Design Engineer to work out of its new facility in Endicott, NY. The Design Engineer must have the ability to make design layouts and production drawings. Must be capable of assuring form, fit, and function of components through dimensional studies, and correlate engineering data to customer specifications. The key responsibilities of the Design Engineer include, but are not limited to: • Prepares designs and specifications. Assists in generation of layouts., • Interfaces with other departments for the manufacturing and testing of samples., • Interfaces with customers and vendors to assure conformance to customer specifications., • Possess a working knowledge of PTC Creo and Windchill., • Ability to make drawings for production and customers., • Coordinate the manufacturing of customer prototypes., • Perform the functions required to process estimate requests and marketing product requests., • Review customer documents for compliance with ACAD documents and if necessary, prepare new designs to conform to these documents., • Travel to customers, suppliers and sister divisions as needed, anticipated to be minimal., • Keep supervision informed of status of all activities on a periodic basis., • Works closely with the Business Development and Product Managers of various business units. Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Design Engineer at Amphenol Commercial Air: • Bachelor’s degree in mechanical engineering or a related field, • Experience in design or design engineering, • Experience with AutoCAD and/or Creo is preferred but not required, • Communications with customers, marketing, manufacturing, quality, process, purchasing, and experimental personnel., • Prepares and checks drawings as required and processes changes., • Performs engineering investigations of manufacturing/quality problems., • Works from either written or oral instructions, with a minimum of supervision., • Work collaboratively with others on the design engineering team to accomplish required tasks to support the interests of the business., • Ability to maintain dedicated focus on intricate details of engineering designs., • Willingness to contribute extra effort in support of critical business opportunities., • Sitting and typing for long periods of time., • Ability to travel, less than 10%. The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role Amphenol Military High Speed is seeking a Design Engineer to work out of its new facility in Endicott, NY. The key responsibilities of this Design Engineer include, but are not limited to: • Prepares designs and specifications, assists in generation of layouts, • Prepares and checks drawing and processes changes as required for production and customers, • Assure form, fit, and function of components through dimensional studies, and correlates engineering data to customer specifications, • Interfaces with other departments for the manufacturing and testing of samples, • Interfaces with customers and vendors to assure conformance to customer specifications, • Coordinates the manufacturing of customer prototypes, • Performs the functions required to process estimate requests and marketing product requests, • Performs engineering investigations of manufacturing/quality problems, • Reviews customer documents for compliance with AMHS documents and if necessary, prepares new designs to conform to these documents, • Works closely with the Business Development Managers and Product Managers of various business units, • Regularly and proactively communicates with customers, Marketing, Manufacturing, Quality, Process, Purchasing, and experimental personnel Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Design Engineer at Amphenol Military High Speed: • Bachelor's degree in mechanical engineering or a related field, • Experience in design or design engineering, • Experience with AutoCAD and/or Creo is preferred, • Ability to work from written and oral instruction, with minimum supervision, • Possesses a working knowledge of PTC Creo and Windchill, • Ability to work collaboratively with others on the Design Engineer team to accomplish required tasks to support the interests of the business, • Ability to maintain a dedicated focus on intricate details of engineering designs, • Willingness to contribute extra effort in support of critical business opportunities, • Proactive periodic communication to manager regarding status of activities, • Willing to travel (15 to 20%), • Prolonged periods of sitting and computer usage The Company With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, and Nogales, MX, Amphenol Military High Speed specializes in rugged high-speed connectors, cables, assemblies, ethernet switches, media converters, and more in copper, fiber optics, or both. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job Description The Role - Amphenol Commercial Air is seeking a Design Engineer (Busbars) to work out of its new facility in Endicott, NY. The Design Engineer (Busbars) will focus on flexible and rigid busbars. They must have the ability to make design layouts and production drawings; must be capable of assuring form, fit, and function of components through dimensional studies, and correlate engineering data to customer specifications. The key responsibilities of the Design Engineer (Busbars) include, but are not limited to: • Prepares designs and specifications, assists in generation of layouts, • Creates design standards for high voltage and high-power busbars, • Ability to make drawings for production and customers, • Coordinate the manufacturing of customer prototypes, • Interfaces with other departments for the manufacturing and testing of samples, • Interfaces with customers and vendors to assure conformance to customer specifications, • Interfaces with other departments, suppliers and sister divisions to develop new designs, • Performs the functions required to process estimate requests and marketing product requests, • Prepares and checks drawings as required and process changes, • Performs engineering investigations of manufacturing/quality problems, • Reviews customer documents for compliance with AAO documents and, if necessary, prepares new designs to conform to these documents, • Works collaboratively with others on the engineering team to accomplish required tasks to support the interests of the business, • Keeps supervision informed of status of all activities on a periodic basis Location • Endicott, NY Salary: $62,354 - $85,000 The Person The key skills and qualities of a Design Engineer (Busbars) at Amphenol Commercial Air: • Bachelor’s degree in electrical engineering, mechanical engineering, or related discipline (or equivalent experience), • Experience with flexible and rigid busbars is preferred, • The candidate must have the ability to knowledgably present complex designs; be organized, self-motivated and respond to questions from groups of managers, clients, customers, and the public in a consistent and timely manner, • Willingness to contribute extra effort in support of critical business opportunities, • Ability to manage projects relative to new designs through engineering and qualification testing processes, • Works from either written or oral instructions, with a minimum of supervision, • Ability to maintain dedicated focus on intricate details of engineering designs, • Experience with CAD (Creo or equivalent) and PDM systems (Windchill or equivalent) preferred, • Proficiency in Microsoft Office Suite, • Sitting and typing for long periods of time, • Ability to travel, less than 10% The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job at a glance Degree Required Acute Care Nurse Practitioner Position Type Full-Time Locums/Travel Part-Time/Contract Work Environment Inpatient Neuro ICU Visa Sponsorship No Experience Level 2 years Job description Schedule: 3-4 12-hour shifts per week, including nights and weekends Number of candidates needed: 1 APP needed What is driving the need: vacancy on unit Patient volume: 6-8 patients per shift Patient age range: Adults Certifications required: ACNP, NY License, NY Rx, BLS, NIH Stroke Scale Certification

Job DescriptionRegistered Dietitian Health Care Facility Surveyor - Maine (#1306) • CMS’s Long-Term Care Basic Training and SMQT certification are required., • Airline and hotel points accumulate for employee's personal use., • Employee discounts., • Employee retirement plan (401k) with a generous match and immediate vesting., • Company-paid tax-free Health Savings Account (HSA)., • Health insurance., • Dental insurance. Impact Recruiting Solutions is currently seeking a Registered Dietitian Health Care Facility Surveyor to fill an opening with a Quality Improvement Consulting Company and will work in a technically exciting environment supporting internal and external customers nationwide. Requirements of the Registered Dietitian Health Care Facility Surveyor: • Must have an Associate or Bachelor’s degree in Dietetics., • Must have successfully completed CMS’s Long-Term Care Basic Training and passed the Surveyor Minimum Qualifications Test (SMQT)., • Must have at least two (2) years of recent experience working as a surveyor accrediting or certifying facilities that serve the residents of long-term care facilities., • Must maintain current licensure to practice as a Registered Dietitian., • Demonstrated history of independent decision-making skills to direct and effectively manage the survey process., • Ability to set priorities independently and collectively in performing survey tasks., • Ability to openly discuss conflicts/controversy, and to seek assistance when appropriate to make decisions and resolve conflicts., • U.S. Citizenship is required for this position., • Ability to travel up to 75% of the time on a regular basis is required. Compensation and Benefits of the Registered Dietitian Health Care Facility Surveyor: • The salary for this position is competitive and negotiable., • This is a Full-time position (Monday - Friday)., • Flexible paid vacation days., • Paid holidays., • Company-issued and company-paid Amex card for travel., • All travel expenses paid directly by the company., • Airline and hotel points accumulate for employee's personal use., • Employee discounts., • Employee retirement plan (401k) with a generous match and immediate vesting., • Company-paid tax-free Health Savings Account (HSA)., • Health insurance., • Dental insurance., • Vision insurance., • Company-paid life insurance., • Company-paid disability insurance., • Extensive training opportunity., • Predictable work schedule.

Job DescriptionKitchen Cabinet Design Technician. Job Description:We have immediate openings for kitchen cabinetry detailers. A professional in this role will perform duties in residential homes and would have an active understanding of kitchen carpentry, be efficient with a tape measure, and be able to discuss the installation procedure and techniques with homeowners. • The position of kitchen detailer requires an active understanding of the measurements required to create a kitchen design., • Applicant should have experience in kitchen design and knowledge of the installation process as well., • This position requires attention to detail while performing measurements in the customer's home., • The applicant for this position needs to be comfortable working in residential homes and engaging with customers at a professional level., • All measurements will be databased in our custom project management tool., • Applicant must be confident and accurate in the utilization of a tape measure as measuring existing space and taking into consideration existing factors of the home are part of the perfect assessment., • Upon hiring, the applicant will go through 2-4 weeks of training in the field., • This job is on the road in the designated area; our detailers are expected to travel within their territory and, under special circumstances, beyond., • Due to the requirement of travel for this position, applicant must have their own vehicle and a valid driver's license., • Nationwide Kitchen Installers is looking for candidates in Binghamton, NY, • And surrounding areas East, West & North., • North of Binghamton to Cortland, West to Sayre, PA, East to Norwich, NY, • It is a requirement for all candidates to pass a background check., • All scheduling is completed by our office team. AREAS AVAILABLE:Central, North & West New York State. Pay is Bi-weekly. Compensation is piece rate. Please email your resume to nick@nkipro.com. Teamwork Makes the Dream Work! Experience: • Cabinet installation or design, 3 years (Required). License/Certification: • Driver's license (Required). Ability to Relocate: • Our detailers are expected to travel for all jobs. Nationwide Kitchen Installers is looking to hire applicants in the areas we currently serve. If the applicant does not live in the specific areas but is willing to relocate, they must be relocated prior to starting the position. Work Location: On the road.

Job DescriptionAre you looking for an exciting career where opportunities for growth are unlimited and where you will be happy to show up for work each day? FYZICAL Physical Therapy and Balance Centers wants someone with your enthusiasm and drive to fill our Fyzician Liaison position at our Johnson City, NY, location! This Fyzician Liaison role places you in a front-row seat with a company known for taking innovative, non-traditional approaches to healthcare, as part of a high-energy champion team that knows how to achieve next-level results. You will have access to state-of-the-art technology and unparalleled continuing education, which will advance your skills, keeping your career on the leading edge. And, with a practice leader who is fully invested in your success and the freedom to innovate, you will know the satisfaction of making a lasting impact that echoes throughout the industry. Discover career happiness at FYZICAL as our Fyzician Liaison! Apply today. No two days will ever be the same in this fast-paced, exciting Fyzician Liaison position with the country's leading physical therapy company! In this dynamic role, you will have the chance to further your career as a valued member of a supportive team of professionals who collaborate to discover what works best for the practice, community and clients. Continuing education opportunities, along with our advanced technology and cutting-edge tools will ensure that you stay atop of the latest industry trends, leading to continued career growth. Here, you will enjoy the flow of a team meant to succeed together. If you are ready to take your career to the next level, apply for our Fyzician Liaison job opening today!ResponsibilitiesFyzician Liaison job responsibilities include: • Generate sales lead/prospective-customer lists, • Canvass customer orders within designated travel area, • Be available to assist customers by phone or in person, • Use samples or company catalog to showcase products, • Trade show attendance, • Collaborate with company reps to ensure accounts and literature are current, • Keep all customer information up-to-date in an electronic database, • Create and preserve referring practice relationships, • Transactions/expense account reporting, • Look into and find resolutions to any customer complaints, • Compile lists of prospective customers for use as sales leads, • Travel throughout assigned territory to solicit orders from regular and prospective customers, • Talk with customers on the sales floor or by phone, • Display or demonstrate products using samples or catalog; attend trade shows, • Work with inside sales representatives to keep account activities and literature up-to-date, • Coordinate customer training; enter new customer data and current customer sales data into computer database, • Develop and maintain relationships with referring practices, • Participate with direct mail program, assuring developed pieces are processed, • Prepare reports of business transactions and keep expense accounts, • Investigate and resolve customer problems with deliveriesRequired SkillsFyzician Liaison required skills & qualifications include:, • Four-year college degree, • Related sales/cutomer service experience and/or training that equals 1+ year(s), • Must be able to travel locally, • Bachelor’s degree preferred, • At least 1 year of related experience and/or training (sales/customer service), • Willing to travel within an assigned territory

Job Description The Role - Amphenol Commercial Air is seeking a New Product Development Engineering Supervisor to work out its new facility in Endicott, NY. The New Product Development Engineer Supervisor is responsible for leading the New Product Development (NPD) engineering team, a multifunctional engineering team focused on the development of electrical connectors and busbars. This role is responsible for prototyping and validation testing in support of new product development and provides leadership and direction to a team of engineers to achieve departmental objectives. The incumbent must be technically strong enough to knowledgeably guide and support direct reports on hands-on design, prototyping, and test work, and will personally perform hands-on tasks as needed. The key responsibilities of the New Product Development Engineering Supervisor include, but are not limited to: • Responsible for supervision, mentorship, and development of multidisciplinary engineering team consisting of Design, Development, and Test Engineers supporting new product development for electrical connectors and busbars setting priorities and balancing workload across concurrent programs., • Provide technical oversight and hands-on guidance across the product development lifecycle – from concept through prototyping, validation testing, and design transfer to production., • Leads and actively participates in product development efforts including; design reviews, project execution, and manufacturing transition., • Leads performance management, including coaching, development, and formal reviews of team members., • Provides technical support and coordination across internal departments, including Operations and Quality., • Ensures the team is properly trained and safe on 3D printers, molding presses, laser cutters, diffusion welders, and other shop/lab equipment., • Works closely with Design and Design Application Engineers, to refine products based on customer and application requirements., • Identifies and drives improvements to internal prototyping and product development processes, working closely with Amphenol sister divisions Location - • Endicott, NY Salary $90,000 - $125,000 The Person - The key skills and qualities of a New Product Development Engineering Supervisor at Amphenol Commercial Air: • Bachelor’s degree in electrical engineering, mechanical engineering, or related discipline (or equivalent experience), with 3+ years of relevant experience., • Demonstrated hands-on experience in product development and prototyping, with the ability to knowledgeably support and step in on hands-on work as needed is required., • Experience with electrical connectors or related aerospace products is preferred; experience with flexible busbars, high power, or high voltage products is a plus., • Practical experience with 3D printing/additive manufacturing, molding, laser cutting, diffusion welding, and/or basic machining is preferred., • Experience with CAD (Creo or equivalent) and PDM systems (Windchill or equivalent) preferred., • Familiarity with industry test standards such as DO-160, EIA-364, EN2591, or similar is preferred., • Proficiency in Microsoft Office Suite, • Strong communication, organizational, and cross-functional collaboration skills., • Strong analytical and problem-solving skills., • Proven ability to lead and motivate teams with diverse technical backgrounds., • Excellent communication skills with experience mentoring engineers and developing technical documentation, • Ability to travel < 10% of the time., • Must be able to sit, stand or walk for prolonged periods of time., • Use of a computer from 1 to 8 hours a day., • Ability to lift and carry up to 20 pounds., • Possible travel domestic or overseas. The Company - With offices in Endicott and Sidney, NY and leveraging manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers competitive pay and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol – Making History, Designing the Future Amphenol Aerospace complies with the laws and regulations set forth in the following EEO poster Equal Employment Opportunity is the Law

Job DescriptionRadiation Therapist Location: Manhattan, NY 10019 Schedule: Monday–Friday | 8:00 AM–4:00 PM Contract Duration: 13 Weeks | Possible Extension Compensation • Local Rate: $42–$50/hour, depending on experience, • Travel Rate: $1,700–$1,950/week, depending on experiencePosition Overview We are seeking an experienced Radiation Therapist to provide therapeutic radiation treatments in accordance with prescriptions and treatment plans established by Radiation Oncologists. The Radiation Therapist will be responsible for accurate patient setup, treatment delivery, treatment verification, equipment safety checks, documentation, and patient support throughout the treatment process. The ideal candidate will have clinical experience in therapeutic radiation therapy and hands-on experience with Varian TrueBeam technology and MOSAIQ EMR. Key Responsibilities • Deliver therapeutic radiation treatments according to the Radiation Oncologist's prescription and treatment instructions., • Review radiation prescriptions for accuracy and identify potential dosage, mathematical, or technical discrepancies., • Accurately position and set up patients for radiation treatment., • Prepare treatment rooms, equipment, immobilization devices, field parameters, and beam-shaping accessories., • Explain treatment procedures and positioning requirements to patients., • Provide reassurance and emotional support to patients while maintaining patient privacy and dignity., • Maintain continuous visual and audible communication with patients during treatment., • Acquire and interpret portal/verification images to confirm treatment accuracy., • Ensure treatment images are reviewed and approved by the appropriate Radiation Oncologist., • Verify and localize treatment areas using radiographic film or electronic imaging systems., • Administer prescribed radiation treatments and maintain accurate daily treatment records., • Perform simple dose calculations using appropriate computer software., • Conduct chart checks and report discrepancies to the appropriate clinical staff., • Perform required daily quality assurance (QA) and safety checks on treatment machines and simulators., • Record required equipment and safety data in accordance with applicable regulations and facility procedures., • Monitor equipment performance and identify treatment-unit malfunctions., • Report equipment defects, deficiencies, or malfunctions to the Senior/Chief Therapist and Medical Physics team., • Maintain treatment equipment in safe and proper working condition., • Understand the proper use of wedges, compensating filters, shielding, and other treatment accessories., • Create and adjust immobilization devices and shielding blocks as required., • Report unusual or adverse patient reactions to the appropriate clinical staff., • Keep treatment rooms clean, organized, and adequately stocked with supplies., • Assist with chart checks, scheduling, chart rounds, and other departmental activities as assigned., • Participate in patient-treatment discussions, in-service training, and departmental education., • Assist with the instruction and evaluation of student radiation therapists when assigned., • Keep patients informed regarding treatment delays and provide appropriate updates., • Maintain professional conduct and adhere to departmental safety and patient-care standards., • Perform other related duties as assigned.Required Skills & Experience, • Minimum 1 year of clinical experience in therapeutic radiation therapy., • Hands-on experience with Varian TrueBeam technology highly preferred/required., • Experience with MOSAIQ EMR., • Strong understanding of radiation treatment procedures, patient positioning, and treatment verification., • Knowledge of radiation safety and quality assurance procedures., • Ability to identify treatment equipment malfunctions and follow appropriate escalation procedures., • Strong attention to detail and commitment to patient safety., • Excellent communication and interpersonal skills., • Ability to work effectively with Radiation Oncologists, Medical Physicists, Senior Therapists, nurses, and other members of the healthcare team.Education, • Graduate of an AMA-approved Radiation Therapy program/school.

Job DescriptionDescription: EXCELLENT WORK ENVIRONMENT AND COMPANY CULTURE! The culture at Meier Supply is built on our shared Core Values: • PEOPLE Teamwork, trust and helping others succeed!, • RESPECT Show ultimate regard for others!, • INTEGRITY Always do the right thing!, • DEDICATION To our customers success!, • EXCELLENCE Commitment to best in class in all we do! We hire, develop, review, reward, and recognize our co-owners based on these characteristics, so it’s important that you share these values in order to be part of our team. We are a 100% employee-owned leading edge wholesale distributor of HVAC/R products based in Conklin, NY with branches throughout NY, PA, MA & CT. Working at Meier Supply is a unique opportunity to join a company that values it's employee owners and rewards them throughout their long careers with us. Being 100% employee owned, means we have the opportunity to work together towards a common goal of increasing our stock value for all employee owners! Benefits: • 401(k), • Company paid disability insurance, • Health insurance, • Dental and vision insurance, • Company paid life insurance, • Paid time off, • ESOP retirement plan, • Health Savings Account (HSA), • Flexible Savings Account (FSA), • Paid holidays Pay: • $23-$25/hr. , depending on experience Job purpose To purchase stocking inventory for HVAC products for all companies and divisions and to maintain proper inventory levels and product mix to support the sales effort of the organization. Responsible for managing $10-$20 Million average inventory investment across multiple companies and branches. Duties and responsibilities • Purchase stocking products from various vendors and manufacturers for all companies and/or branches., • Maintain system ordering controls to insure proper inventory levels., • Communicate with branch managers and sales manager to maintain proper product mix at all locations., • Negotiate pricing, payment terms, cash discounts, and where applicable to negotiate incentive rebates with vendors., • Replenish/remix stock between companies and branches as necessary in order to maintain proper stock levels and product mix., • Visit branches periodically to discuss any inventory/purchasing issues., • Formulate solutions for eliminating overstock/obsolescence on various product lines., • Make sound decisions for company’s best interests., • Other duties as assigned. Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Requirements: Education/Experience/Skills · High School Diploma required. Associates degree in Business Administration or Finance preferred but not required. · 1 year or more of progressive sales or purchasing experience · HVAC industry experience preferred but not required · 2 years experience in Microsoft 365 Behavioral Competencies · Strong communication and negotiation skills · Ability to work independently and as a team member Working conditions Normal office environment. Work schedule is Monday- Friday from 8 a.m. – 5 p.m. There may be some flexibility in the department for these hours to shift to start earlier or later depending on business needs. Full-time, 40 hours per week required. Occasional Travel Requirement – Up to 10% travel to branches, conferences and other operating companies requiring some overnight stay. Physical requirements This job is performed in an office environment with long periods of sitting, working on the computer, answering phones, operating office equipment such as copiers, fax, etc. Standing and walking around are also performed on a regular basis. Filing is required where stooping, kneeling may be involved.

Job Description Company Overview: Join the dedicated team at Overhead Door Company of Binghamton™, a fourth-generation family business owned and operated by the Marsted Family. With roots dating back to 1924, when George Marsted founded an Overhead Door manufacturing plant in Canastota, NY, the Marsted family has a long-standing tradition of excellence in the garage door industry. Today, the family operates three locations: Overhead Door Company of Binghamton™, Overhead Door Company of Cortland™, and Overhead Door Company of Greater Syracuse™. We take great pride in offering our customers the best products and services, backed by a top-notch team that consistently goes the extra mile every day of the week. Job Description: We are seeking individuals with verifiable experience in the garage door trade to join our team as Installation/Service Technicians. This role involves driving to job sites, assessing customer needs, and completing the installation or repair of doors and dock equipment to ensure customer satisfaction. Responsibilities: • Travel to job sites as directed by the manager to assess and address customer service, repair, or installation needs., • Perform installations and repairs of garage doors and openers, ensuring customer satisfaction., • Gain comprehensive knowledge of all products, enhance mechanical skills, and learn new installation techniques to meet our high standards of quality workmanship with minimal warranty issues., • Implement safe work practices and maintain a safe working environment., • Ensure all job tickets are accurately completed, signed, and submitted., • Communicate with management regarding any problems or changes in the scope of work., • Maintain truck inventory and develop an understanding of all parts, including their numbers and descriptions. Professional Growth Opportunities: • Opportunities to attend paid professional training, including training sessions by David Mount at Mount On Site Training in Maryland, a highly regarded industry expert., • Opportunities to obtain technician certifications through the Institute of Door Dealer Education and Accreditation. Requirements: • High School Diploma or equivalent, • Ability to safely lift 75 pounds overhead, • Verifiable experience in the garage door industry, • Welding experience is a plus, • Clean NY State Driver's License, • Ability to pass a drug test, • Ability to obtain a DOT medical certificate (non-CDL) Compensation & Benefits: • Competitive hourly salary, • Comprehensive benefits package including medical, life, and disability coverage, and 401(k) plan, • Paid Time Off (PTO), • Paid major holidays If you have the required experience and are looking to join a reputable company with a rich history and a commitment to quality, we encourage you to apply for the Experienced Installation/Service Technician position at Overhead Door Company of Binghamton™. We look forward to welcoming you to our team and supporting your professional growth. Commitment to Workforce Diversity: Overhead Door Company of Binghamton™ is an Equal Opportunity Employer committed to building a diverse workforce. We encourage applications from all qualified individuals, including women, minorities, veterans, and individuals with disabilities. While this is a highly specialized position requiring experience in the garage door trade, we welcome inquiries from diverse candidates with relevant qualifications.

Job Description About our Client Our client is a leading innovator in precision diagnostics, advancing patient care through cutting-edge molecular science and AI technology. With a focus on oncology and other complex diseases, their solutions help clinicians make more informed diagnoses and treatment decisions. Their growing line of liquid biopsy offerings provides a full range of solutions for early detection, therapy selection, and treatment response; using the most comprehensive approach to help guide personalized care and improve outcomes for patients. The company is entering a significant growth phase, and this is a unique opportunity to be on the cutting-edge and part a high-impact team on a mission to improve cancer care. About the Position The Liquid Biopsy Sales Specialist will be responsible for driving commercial adoption of an innovative portfolio of blood test solutions within the assigned territory. This role will involve developing and executing strategic sales plans, building relationships with key stakeholders, and consulting with healthcare providers on the competitive advantages of the offerings. You will partner closely with regional sales teams and develop strategies to support market adoption—from driving success for new product launches to capturing market share—while delivering revenue growth. This is an opportunity to represent a differentiated technology platform in the rapidly growing segment of precision oncology. Territory: Upstate NY, NH, VT, and Western MA About the Requirements • Bachelor's degree required; MBA a plus, • 5+ years of sales experience within the liquid biopsy, oncology, or molecular diagnostics markets, • Knowledge and understanding of the liquid biopsy and oncology markets, • Established network of Oncologist and Physician contacts within major cancer centers, health systems, and hospitals within the territory, • Able to build strong client relationships and navigate complex buying processes, • Hunter sales mentality with a track record of meeting or exceeding sales targets, • Works well with others in a matrixed sales environment, • Up to 75% field travel required. Home-office based

Job DescriptionMammography Technician Location: New York, NY Duration: 9 Weeks Schedule: Day Shift – 5 × 8-hour shifts Shift Time: 7:00 AM – 3:00 PM Compensation • Travel: $2,400–$2,500 Gross Per Week, based on experience, • Local: $60–$64 per hour, based on experiencePosition Overview We are seeking an experienced Mammography Technician for a 9-week contract opportunity in New York, NY. The ideal candidate will have strong experience performing screening and diagnostic mammography while maintaining high standards for image quality, patient care, and regulatory compliance. Key Responsibilities • Perform routine screening and diagnostic mammography examinations., • Demonstrate competency in mammography positioning, compression, and appropriate technique factors., • Ensure all radiographic images are accurately labeled according to departmental procedures., • Evaluate images for technical quality and acceptability., • Ensure completed images are transmitted to the appropriate PACS system in a timely manner., • Accurately complete documentation and required study information in the department's imaging system., • Maintain accurate patient tracking and examination records., • Follow established departmental procedures, quality standards, and patient-safety protocols., • Maintain compliance with applicable mammography regulations and quality-assurance requirements.Requirements, • Must possess a valid New York State License in Diagnostic Radiography., • Must be ARRT registered., • Must meet and maintain all applicable MQSA requirements., • Previous mammography experience required., • Strong attention to detail and commitment to patient care.

Job Description Seeking Compassionate Travel Radiation Therapist for SUNY Upstate Medical University! We are dedicated to connecting passionate Radiation Therapist with opportunities that align with their lifestyle and professional goals. We believe that strong, ongoing relationships with our partnered facilities are key to delivering exceptional care. Our team works closely with providers to understand their unique needs, ensuring you’re always placed in a role that supports both your growth and their care requirements. Hourly Pay Rate: $72 *Rate includes $202 daily tax-exempt stipend Requirements: • AAS/ BA or BS in Radiation Therapy or completion of approved AMA certified program., • RT(T); NYS license or limited permit to practice as a Radiation Therapist required., • CPR Certified Responsibilities: • Delivers accurately the prescribed planned course of radiation therapy under the general supervision of the Radiation Oncologist, • Checks prescriptions and compose patient charts, accurately record medical histories., • Explains procedures to patient and advises patient regarding reactions to treatment., • Observes patient for any unusual reactions or symptoms, ensuring the safety of the patient throughout the course of the procedure.

Job Description The IT Interoperability Manager provides senior technical leadership for Care Compass’s Rural Health Transformation Program (RHTP) data sharing and interoperability work, owning the development of the regional data sharing, interoperability, and information technology plan and directing its execution in subsequent years. Serving as Care Compass’s subject-matter expert on health data interoperability, this role assesses regional data-sharing and technology infrastructure across physical health, behavioral health, substance use, social care, public health, EMS, and care coordination partners; produces the Data Sharing, Interoperability, and Information Technology Plan that guides regional infrastructure build-out in subsequent years; and leads the design, configuration, onboarding, and operationalization of the interoperability connections, shared platforms, and dashboards it defines. Working with other members of the IT team and the broader RHTP team, and coordinating partner organizations and technology vendors, the IT Interoperability Manager reports to the IT Director and works closely with the Security Officer to ensure the data-sharing and network environments remain within Care Compass’s HITRUST boundaries. Essential Functions: • Provide senior technical leadership and serve as Care Compass’s subject-matter expert on health data interoperability, guiding IT staff, partner organizations, and technology vendors., • Identifyandmaintainthe roster of critical stakeholders that require interoperability to support rural health integration, including physical health, behavioral health, substance use, public health, EMS, social care, and care coordination agencies., • Inventory existing data systems, referral platforms, HIE connections (e.g.,HealtheConnections), case management tools, analytics capacity, and data-sharing agreements across the 10-county region., • Workingwith analytics,identifygaps indataand develop methods and systems to close those gaps., • Assess privacy, consent, data governance, and security considerations for inter-agency data sharing, including HIPAA and 42 CFR Part 2., • Identifyand evaluate technology and interoperability options — shared care coordination platforms, referral management, dashboards, population health tools, and other infrastructure — and map them to priority use cases., • Identifycosts, procurement needs, and sustainability considerations, and author the Data Sharing, Interoperability, and Information Technology Plan, defining priority solutions and the implementation sequence forsubsequentyears., • Lead the Data Governance and Interoperability workgroup, driving decisions on data transport/format, element-level sensitivity tagging, and metric-to-feed mapping., • Execute the implementation sequence defined in the Data Sharing, Interoperability, and Information Technology Plan, standing up priority technology solutions across the region., • Configure, test, and onboard interoperability connections and data feeds — HIE connectivity (e.g.,HealtheConnections), ADT feeds, referral platforms, and care coordination tools — bringing partner systems into production., • Operationalize shared care coordination platforms, referral management, dashboards, and population health tools for physical health, behavioral health, substance use, social care, public health, EMS, and care coordination partners., • Establish andmaintainthe data-sharing agreements, consent, and governance controlsrequiredfor each connection, including HIPAA and 42 CFR Part 2 safeguards., • Manage technology vendor relationships, contracts, and implementation timelines for interoperability solutions, and oversee associated budgets and procurement., • Monitor data quality, feed completeness, and system performance; troubleshoot interoperability issues; and refine the roadmap as regional needs evolve. STAFF SUPERVISED: • Oversees ITInteroperability team members(2-5 employees)., • Coordinates cross-functional support with IT teams, contractors,participating RHTP organizations,and vendors. Non-Essential Functions: May assume additional responsibilities as requested. MINIMUM REQUIREMENTS: • Bachelor’s degree in Health Informatics, Information Technology, Public Health, Computer Science, or arelated fieldrequired;Master’sdegree preferred., • Master’s degree with aminimum7 years(orBachelorswith 10+ years)of progressive experience in health data, interoperability, or IT/data systems, including experience leading interoperability, integration, or health IT initiatives., • Demonstrated leadership of technical projects, cross-functional teams, and technology vendor relationships., • Deep, hands-onexpertisewith health information exchange (HIE) and interoperability standards (HL7 v2, FHIR, C-CDA, X12, ADT), integration engines (e.g., Mirth/NextGen Connect), EMPI, APIs, and ETL processes., • Expert knowledge of HIPAA, HITECH, 42 CFR Part 2, PHI/PII, consent management, and data governance across multiple organizations., • Experience in a healthcare data setting; familiarity with healthcare quality measures and value-based care highly desirable., • Experience negotiating and managing data-sharing agreements and data use agreements., • Familiar with HITRUST/SSP and healthcare security frameworks., • Strong leadership,strategic-planning, documentation, andstakeholder-managementskills. LICENSE/CERTIFICATION: • Minimum Required: N/A, • Preferred: CPHIMS, HL7 FHIR, or PMP certification. WORK ENVIRONMENT: Care Compass Network utilizes a hybrid work model where employees are able to work remotely from a home office or from the CCN office, a non-clinical professional office setting. There may be some travel required for partner and/or network meetings. Care Compass offers medical/dental/vision insurance, with a generous paid time off policy and 401(k) match.

Job Description Seeking Compassionate Travel Nuclear Medicine Technologist for SUNY Upstate Medical University! We are dedicated to connecting passionate Nuclear Medicine Technologist with opportunities that align with their lifestyle and professional goals. We believe that strong, ongoing relationships with our partnered facilities are key to delivering exceptional care. Our team works closely with providers to understand their unique needs, ensuring you’re always placed in a role that supports both your growth and their care requirements. Hourly Pay Rate: $79 *Rate includes $202 daily tax-exempt stipend Requirements: • CNMT or ARRT(N) and NYS DOH (Nuclear Medicine License), • BLS through the American Heart Association or the American Red Cross required Responsibilities: • Provides radiologic examinations based on referring physician and radiologist needs, • Calculates, orders, administers and records radioactive isotopes, • Performs all duties with hybrid imaging in a PET/CT outpatient department, • Verify physician orders for procedures as well as properly identifying patient, • Educate patients about the process and ensure high-quality care throughout.