Trabajos it engineer en Binghamton, New YorkCrear alertas

Job Description Field Technician – ITS Field Support Kapsch is one of Austria's most successful global technology companies. With its comprehensive ITS (Intelligent Transportation Systems) portfolio, Kapsch is actively addressing the challenges of the present and the future with intelligent mobility solutions in a wide range of application areas. As a family-owned company founded in 1892 and headquartered in Vienna, Kapsch can look back on 130 years of experience with the future. About the Role Kapsch TrafficCom is seeking a highly motivated Field Technician role to support the Intelligent Transportation Systems (ITS) for NYSDOT’s Transportation Management Center (TMC). This role involves hands-on technical work, troubleshooting, and oversight of ITS infrastructure to ensure reliable performance of the Advanced Traffic Management System (ATMS) and ITS devices. The technician will be based out of NYSDOT Region 9 (Binghamton) and will travel to remote ITS sites as needed, including regular travel to NYSDOT Region 2 (Utica), to provide operational support. Key Responsibilities • Assist IT Network Administrator and Systems Engineer with ITS asset management and spare parts inventory., • Provide equipment status reports and resolve trouble tickets/work orders for ITS operations., • Troubleshoot ITS communication/network failures; upgrade, replace, configure, install, and repair ITS devices., • Test ITS equipment such as Variable Message Signs (VMS) and Portable Variable Message Signs (PVMS), Closed-Circuit Television (CCTV) Cameras and RTMS Detectors, which may include after-hours testing to minimize impacts to traffic operations.[MH3], • Conduct routine inspections of ITS hardware; submit monthly condition checklists., • Investigate damage to ITS infrastructure caused by traffic incidents; assist in cost recovery efforts., • Oversee ITS maintenance contractors and monitor daily work schedules., • Support TMC managers during incidents, roadwork, and special events with real-time condition reporting., • Solving complex problems that improve daily the lives of people around the world, • Opportunity to work with cutting edge technologies in a high-growth industry, • Career growth and development opportunities, • Casual work environment with flexible work hours, • Associate’s degree or higher in Electrical Engineering, Electrical Engineering Technology, Computer Science, or Information Technology; OR, • Electronics troubleshooting and repair (modems, switches, routers)., • Ability to perform field work in varying terrain and weather conditions., • Proficiency in MS Office and reading plans/schematics., • Knowledge of utility stakeout language and the ability to interpret utility markings and field layouts., • Strong oral and written communication skills., • Experience with telecommunications and IT systems, including wireless and fiber optic communication., • Knowledge of electrical safety, codes, and safe working practices., • Knowledge of or experience with basic networking concepts and equipment, including switches, firewalls, VPNs, VLANs, and general network troubleshooting., • Ability to work effectively in a team environment.

Job Description Insero Talent Solutions is recruiting an IT Systems Engineer with a fast growing IT services company in Binghamton, NY. We are looking for an experienced Systems Engineer to work with our clients. Excellent benefits and high compensation available to the right candidate. • Challenging and rewarding work, • Excellent verbal skills and presentation, • Able to speak to and support a multitude of customers, from operations to leadership, • MS Server stack 2003-2019, • Hyper-V / VMware Support, • Firewall / VPN / WAN / LAN / DMZ / Routing / Switching, • DNS / DHCP / AD / Group Policy, • Office 365 / Exchange, • Backup and Disaster Recovery technologies

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionAre you a friendly problem solver who can deliver a five-star experience to our guests? Then you might be perfect for the maintenance engineer role at our hotel. You will be responsible for supervising the property's complete maintenance and routine processes to make it fully functional, enjoyable, and safe. Our ideal candidate is committed to helping our guests actively and consistently. If this describes you, and you're ready for an exciting career in hospitality, apply now!Compensation: $17 per hour Responsibilities: • Manage the hotel's machinery and preventive maintenance procedures, • Work in collaboration with other technicians who will assist you with a variety of maintenance tasks, • Observe all engineering safety rules and criteria, • Complete all work orders and fix maintenance problems promptly, • Use a wide range of tools such as hammers, screwdrivers, indicators, edge finders, drills, wrenches, and additional equipmentQualifications:, • 2-4 years of maintenance experience is required for this role, • You should have the ability to lift and carry up to 50 lbs., • Stellar communication, organizational, and interpersonal skills are needed, • Experience with facilities management software is preferred, • Valid driver’s license and good driving record requiredAbout Company Conveniently located in downtown Binghamton’s business and government districts. Accessible from all major highways, our inviting Binghamton hotel is situated near the confluence of the Chenango and Susquehanna Rivers.

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Triple Cities Metal Finishing is seeking a highly motivated and detail-oriented Entry-Level Industrial Engineer to join our team. This position is perfect for a recent graduate with a Bachelor's degree in Industrial Engineering or a related field, as no prior professional experience is required. The Industrial Engineer will be responsible for applying engineering principles to optimize and improve our metal finishing production processes, focusing on efficiency, quality, safety, and cost reduction. This role involves hands-on work on the production floor, data analysis, and collaboration with all levels of the organization. About Us Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview Process Optimization & Efficiency: • Assist in observing, documenting, and analyzing current metal finishing processes (e.g., plating, anodizing, coating, polishing) to identify bottlenecks, waste, and areas for improvement., • Support the implementation of continuous improvement initiatives to enhance productivity and workflow., • Conduct time studies and work measurement to establish and document standard work procedures and production rates., • Collaborate with the Quality department to ensure processes adhere to quality standards (e.g., ISO, AS9100, NADCAP), • Analyze production data to identify root causes of quality issues and process variation., • Create and update standard operating procedures (SOPs), work instructions, and technical documentation., • Assist in generating reports, charts, and presentations to communicate findings, project progress, and recommendations to management and production teams., • Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or a closely related engineering field (required)., • No prior professional experience is required. Relevant coursework, university projects, or internships in a manufacturing environment are a plus., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD)., • Excellent problem-solving and analytical skills., • Strong communication and collaboration abilities. Total Compensation Package • Wage, • $17.50 - $25.00/hour (Compensation depends on the selected candidate's experience), • Benefits: We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description PYRAMID Business Systems, a locally owned and fully insured IT consulting, support, and security firm located in Binghamton, NY, with a history spanning 35 years, is currently seeking an experienced network engineer. The ideal candidate will possess a robust network competency and hold industry-recognized certifications. PYRAMID offers a competitive salary and benefits package, commensurate with experience and certifications. Job Summary: The primary responsibility of this role is to assist in the design, implementation, maintenance, and support of technology environments for both SMB and enterprise clients. This encompasses a diverse range of technologies including Windows, Hyper-V, VMware, Storage solutions, Active Directory, O365, and development support for systems and applications infrastructure. The candidate should be proficient in managing all phases of server and desktop processing/operating systems, capable of handling complex problems across multiple technology platforms. Duties/Responsibilities/ Essential functions: • Administering Windows servers and maintaining Microsoft Active Directory configurations., • Supporting and managing all O365 related products., • Designing and managing application interfaces and dependencies., • Providing architectural design and support for various application platforms., • Developing and maintaining comprehensive platform network documentation., • Offering tier 3 troubleshooting support as necessary., • Implementing and configuring new servers, workstations, printers, firewalls, switches, wireless access points, group policies, etc., • Diagnosing, troubleshooting, and resolving hardware, software, and network infrastructure issues., • Executing network security measures to safeguard client environments., • Researching and evaluating new technologies to meet client IT requirements. Experience (5+ years): • Advanced triage and troubleshooting capabilities, • Comprehensive understanding of network concepts, • Expertise in network administration, including layer 3 switching, firewalls, and wireless networks, • In-depth knowledge of network and application security, • Proficiency in Active Directory, • Extensive experience with Windows Servers, • Competence in VPN and remote connectivity, • Advanced knowledge of Microsoft technologies such as Azure, Microsoft 365, Microsoft Entra ID/AADDS, Active Directory Domain Services, Windows 11, Windows Server 2025+, DHCP, and DNS, • Availability to work nights and weekends as required for project completion or issue resolution, • Strong project management skills, • Experience with managing technology, • Exceptional problem-solving and troubleshooting abilities, • Professional and effective communication skills, • Ability to work as part of a team, • Possession of reliable transportation and valid driver's license, • Prior experience in service desk or technical support roles is required, • High level of diplomacy and strong interpersonal skills, • Customer service-oriented mindset, • High school diploma or equivalent; Bachelor’s degree; or a combination of education and experience that provides the knowledge, skills, and abilities perform required duties effectively, • Experience in network administration Pay: From $25.00 per hour Benefits: • 401(k), • Health insurance, • Bonus opportunities, • Hourly pay, • Endicott, NY: Relocate before starting work (Preferred) Work Location: In person

Job DescriptionDescription: Transportation Highway Group Technical Manager – Civil Engineering Lead with Purpose. Design What Moves Communities. Fisher Associates is seeking a Transportation Highway Group Technical Manager / Civil Engineer to provide senior-level technical leadership on highway and roadway design projects across Upstate New York. This opportunity is ideal for an experienced Civil Engineer or Transportation Engineer who is passionate about transportation infrastructure, technical excellence, and mentoring engineers. In this role, you will lead hands-on technical design, ensure high-quality deliverables, and support projects for clients such as NYSDOT and local municipalities. You will play a key role in shaping project outcomes and team success within a collaborative, community-focused environment. At Fisher Associates, we value innovation, integrity, and leadership. Join a firm where your expertise is recognized, your growth is supported, and your work makes a lasting impact. Apply today to advance your civil engineering leadership career with Fisher Associates. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation Highway Group Manager • Deliver transportation projects that improve mobility, safety, and quality of life in local communities., • Foster a high-performing, motivated team through clear expectations, constructive feedback, mentoring, and career development., • Oversee the design and execution of highway engineering projects, ensuring compliance with industry standards, regulations, and client requirements., • Serve as a technical lead, guiding the team on best practices, decisions, and troubleshooting as needed., • Implement and oversee quality control processes and conduct technical audits to ensure high standards., • Maintain effective communication with project managers, clients, and cross-functional teams., • Ensure effective resource allocation, adequate staffing, and utilization to meet project and team goals., • Assist in recruiting top engineering talent who align with the team’s technical excellence and company culture., • Lead continuous improvement initiatives to enhance team performance., • Stay current with transportation design trends and emerging technologies, integrating them into project solutions., • Contribute to the organization's technical strategy and help forecast future technical needs. Requirements: What You Bring, Your Expertise as a Transportation Group Highway Manager • B.S. degree in Civil Engineering, • 8-15 years’ experience in transportation, roadway, or highway engineering, • Professional Engineering License (PE) preferred or ability to obtain it, • Prior staff management preferred, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYSDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Lead and contribute to meaningful transportation projects that improve local communities while advancing your technical leadership and career growth. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Infrastructure + Mobility Group Manager Transportation Engineering | Project Delivery | People Leadership Lead high-performing teams. Deliver meaningful infrastructure. Shape how communities move. Fisher Associates is seeking an experienced Transportation Engineering Manager / Infrastructure Group Manager to lead project delivery and people management for transportation planning and design projects across Upstate New York and the Hudson Valley. This senior leadership role is ideal for a licensed Professional Engineer (PE) with a strong background in transportation, bridge, highway, or traffic engineering, who is ready to step into a visible role focused on project management, team leadership, and client relationships. In this role, you will manage and mentor Project Managers, oversee project performance, and?directly manage select projects while?ensuring?the successful delivery of transportation projects for clients such as?NYSDOT and local municipalities. You will set direction, balance workloads, support professional development, and ensure projects are delivered on time, on budget, and in alignment with client expectations. If you are ready to advance your transportation leadership career and make a meaningful impact, we encourage you to apply and start the conversation with us. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as an Infrastructure + Mobility Group Manager • Lead and grow a collaborative, high-performing team aligned with the firm’s mission, values, and commitment to design excellence., • Provide hands-on leadership that empowers Project Managers, supports professional development, and fosters accountability and engagement across locations., • Position the Infrastructure + Mobility group for long-term success through strong team morale, consistent performance, and sustainable growth., • Oversee transportation projects, ensuring clear priorities and delivery on time, on budget, aligned with scope and quality expectations., • Effectively manage project financials, staffing, and schedules while proactively resolving technical, schedule, or budget challenges., • Serve as primary client contact, building trusted relationships and delivering exceptional service to public and private sector clients., • Contribute to business planning and proactively drive new work with existing and prospective clients., • Lead proposal development and participate in interviews, promoting Fisher’s design capabilities and market presence., • Mentor, coach, and set expectations for staff while supporting performance and career development., • Navigate and support complex public processes and municipal approvals related to transportation projects., • B.S. degree in Civil Engineering or related field (Master’s preferred), • 15+ years minimum in transportation, roadway, or highway engineering, • Professional Engineering License (PE), • 10 years minimum of project management experience, • Strong financial acumen, with the ability to use dashboards, metrics, and data to drive performance, accountability, and results., • Familiarity with PENNDOT design standards preferred, • Prior experience successfully managing and leading a team, • Excellent leadership, communication, and interpersonal skills, • Proven client relationship and business development success in land development sector, • Proficiency in MS Office; Experience with MicroStation preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Superior organizational and planning skills with keen attention to detail, • Highly adaptable and proactive in meeting deliverables and deadlines, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams., • Your success is supported by a flexible work environment so you can thrive professionally and personally. Your Impact Matters, Your Career Thrives. Work on engaging transportation projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental and Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholder Opportunity, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate based on any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Technical Manager-MV Renewables Lead Medium-Voltage Renewable Energy Projects and Drive Technical Excellence Fisher Associates is seeking a Technical Manager-MV Electrical Engineering to lead medium-voltage (MV) renewable energy engineering and design for utility-scale and commercial renewable energy projects, including solar PV, battery energy storage systems (BESS), and wind power. In this role, you will provide senior-level electrical engineering leadership, oversee design QA/QC, calculations, redline reviews, and deliverable verification, ensuring all work complies with industry codes, permitting requirements, utility standards, and client specifications. You will mentor and develop electrical engineers from junior to senior levels, guide projects from preliminary engineering through Issue for Construction (IFC), and help deliver safe, reliable, high-quality renewable energy infrastructure. If you’re ready to lead medium-voltage renewable energy engineering projects and help advance the clean energy transition, apply today and bring your expertise to a growing, innovative team. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Technical Manager-MV Renewables • Lead medium-voltage (MV) electrical engineering design for renewable energy projects including solar PV, BESS, and wind, • Provide senior technical leadership and serve as a subject matter expert for electrical engineering teams, • Oversee QA/QC reviews of electrical designs, calculations, redlines, and construction deliverables, • Mentor engineers and drafters, ensuring technical accuracy and high-quality drawing production, • Collaborate with Project Managers, Technical Leads, and multi-discipline teams across all project phases, • Develop scopes of work, technical specifications, and phased design packages (30%, 60%, IFC), • Perform and review electrical calculations including load flow, short circuit, grounding, protective coordination, ampacity, voltage drop, and equipment sizing, • Apply expertise in MV collection systems with working knowledge of HV substations and gen-tie systems, • Ensure compliance with NEC, IEEE, NFPA, NERC, utility standards, and permitting requirements, • Support proposals with engineering scopes, design assumptions, and cost estimates, • Conduct power system and interconnection studies (CESIR, SIS, BOP solutions), • Support construction with field engineering, site visits, and as-built reviews, • Drive continuous improvement through updated standards, processes, and engineering tools Requirements: What You Bring, Your Expertise as a Technical Manager-MV Renewables • Bachelor’s degree in Electrical Engineering from an accredited university, • 15+ years of electrical engineering experience supporting renewable energy and power generation projects, • Active Professional Engineer (PE) license required, • Experience with solar PV, BESS, wind, and renewable EPC projects, • Proven expertise in short circuit, load flow, grounding, protective coordination, cable sizing, ampacity, and equipment sizing, • Ability to read and interpret MV/HV single-line diagrams (SLDs), • Proficiency with AutoCAD, PVCase, PVSyst, ETAP, SKM, and Civil 3D, • Strong working knowledge of IEEE, NFPA, NEC, and NERC codes, • Understanding of renewable and conventional power plant regulatory environments, DC/AC systems, and interconnection processes, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Triple Cities Metal Finishing is seeking a highly motivated and detail-oriented Entry-Level Industrial Engineer Technician to join our team. This position is perfect for a recent graduate with a Bachelor's degree in Industrial Engineering or a related field, as no prior professional experience is required. The Industrial Engineer Technician will be responsible for applying engineering principles to optimize and improve our metal finishing production processes, focusing on efficiency, quality, safety, and cost reduction. This role involves hands-on work on the production floor, data analysis, and collaboration with all levels of the organization. About Us Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we conduct everyday business. From advanced surface preparation to highly technical finishing processes, we can handle the smallest pieces to large parts over 30 feet long. Our three shifts of skilled professionals in our 125,000 square foot facility have made us the vendor of choice for metal finishing for Northeastern United States. Whether it is electroplating, electroless plating, wet paint, or powder coat, we finish it right the first time! Position Overview Process Optimization & Efficiency: • Assist in observing, documenting, and analyzing current metal finishing processes (e.g., plating, anodizing, coating, polishing) to identify bottlenecks, waste, and areas for improvement., • Support the implementation of continuous improvement initiatives to enhance productivity and workflow., • Conduct time studies and work measurement to establish and document standard work procedures and production rates., • Collaborate with the Quality department to ensure processes adhere to quality standards (e.g., ISO, AS9100, NADCAP), • Analyze production data to identify root causes of quality issues and process variation., • Create and update standard operating procedures (SOPs), work instructions, and technical documentation., • Assist in generating reports, charts, and presentations to communicate findings, project progress, and recommendations to management and production teams., • Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or a closely related engineering field (required)., • No prior professional experience is required. Relevant coursework, university projects, or internships in a manufacturing environment are a plus., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD)., • Excellent problem-solving and analytical skills., • Strong communication and collaboration abilities. Total Compensation Package • Wage, • $17.50 - $25.00/hour (Compensation depends on the selected candidate's experience), • Benefits: We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance, • Free Fountain Soda Machine On-site! Triple Cities Metal Finishing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: Bridge Engineer– Civil/Structural Launch Your Career in Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career Bridge Engineer eager to build a strong foundation in bridge design and transportation engineering? Fisher Associates is seeking a motivated Bridge Engineer to join our collaborative Bridge and Transportation Engineering team. In this hybrid role, you will gain hands-on experience supporting bridge design, analysis, and transportation infrastructure projects that enhance safety, mobility, and connectivity in the communities we serve. You’ll also benefit from mentorship, professional development opportunities, and a clear path toward PE licensure. If you’re ready to take the next step in your engineering career and help design the bridges of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects that create positive community impact while offering diverse, challenging opportunities to grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Technical Manager-HV Substations Lead the delivery of high-impact HV substation engineering that powers the future of energy. As the Technical Manager-HV Substations, you will serve as Fisher’s senior technical authority for HV substation design and engineering, including transmission interconnections, collector switchyards, POI substations, and generator tie systems for renewable and conventional energy clients. In this role, you’ll provide leadership across substation physical design, electrical systems, grounding, protection & controls, and system study coordination, ensuring quality, QA/QC, and compliance at every phase. You’ll mentor engineering staff, partner with Project Managers, support proposals, and shape technical standards and best practices across the firm. Projects span 30%, 60%, and IFC design through construction and commissioning, giving you full end-to-end influence on critical infrastructure. If you’re ready to lead complex HV substation engineering projects, elevate technical teams, and drive grid reliability across renewable and utility-scale energy, apply today and join Fisher Associates. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Technical Manager-HV Substations • Lead HV substation engineering (69 kV–345 kV+) for transmission, interconnection, and utility projects, • Serve as senior technical authority for HV substation design and engineering, • Oversee QA/QC for drawings, calculations, studies, and IFC packages, • Design and review substation layouts, electrical schematics, grounding, conduit routing, lightning protection, and P&C interfaces, • Perform and review power system studies including load flow, short circuit, grounding, protection coordination, arc flash, insulation coordination, voltage drop, and ampacity, • Ensure compliance with NEC, NESC, IEEE, ANSI, NFPA, NERC, utility standards, and permitting requirements, • Interface with utilities and ISOs on interconnection requirements, SCADA/telecom integration, protection philosophies, energization, and commissioning, • Mentor and train engineers and designers, ensuring technical accuracy and quality deliverables, • Support proposal development with scopes, assumptions, and cost estimates, • Support construction and field engineering, including site visits and as-built documentation, • Bachelor’s degree in Electrical or Mechanical Engineering, • 15+ years of substation engineering design experience, • Active Professional Engineer (PE) license required, • Experience with renewable power plants, EPC projects, and utility-scale infrastructure preferred, • Strong background in renewable interconnection, transmission, and utility coordination, • Expertise in power system studies, including short circuit, load flow, grounding, protection coordination, arc flash, cable sizing/ampacity, trenching/cabling, equipment sizing, and lightning/lighting studies, • Ability to develop and interpret SLDs, 3-line diagrams, wiring diagrams, schematics, and substation layouts, • Proficient in AutoCAD, Civil 3D, ETAP, SKM, CYMCAP, • Strong knowledge of IEEE, NESC, NEC, NFPA, ANSI, NERC, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Project Manager I to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Initiation, Planning, Executing, and Closing Projects — defining the project WBS, Cost Baseline and OBS structure, initiating the project, building its comprehensive work plan, controlling and managing to the risks, scope, schedule and budget, • Managing Teams — facilitating commitment and productivity, removing obstacles, and managing teams, • Implementation and Management of Quality and Environmental Process and procedures on all projects focusing on meeting SPI and CPI performance indicators less than 1.0, • Management of third-party projects including other transmission Customers and interconnecting customers, • Accountable and Responsible for:, • Cost /Budgeting and Management, • Communication Management, • Change Management, • Schedule Management, • Construction Management Oversight, • Commissioning Management Oversight, • Risk Management, • Regulatory and Stakeholder Management, • Responsible for the execution and successful completion of the project and the main point of contact between contractors and the client on all project matter., • Bachelor’s Degree is Required, • 5+ years in large scale projects/program management for utility business, • Professional Engineer License and/or Project Management Professional (PMP) Certification, • Proficient in Microsoft Project, Excel, PowerPoint, and, • Project Management Professional or Program Management Professional Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance

Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. This position is for an experienced Rad

Working here means using your passion and ingenuity where it counts – defending national security with breakthrough technology, superior products, and intelligence solutions. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations,

Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Lockheed Martin considers factors such

To excel in this position, you should have a willingness to learn and adapt, good communication skills, reliability and strong work ethic, basic computer literacy, a positive and cooperative attitude, and the ability to follow directions. Other duties include provide excellent service to customers a

It's an approach grounded in real-world construction knowledge, deep familiarity with building codes, and a nuanced understanding of the many authorities having jurisdiction. Their work spans commercial, residential, hospitality, retail, and complex renovation projects, environments where clarity, s

Perks include competitive pay, flexible scheduling, training opportunities, a supportive work environment, and career growth potential. We’re looking for a Amazon IT Support Technician to diagnose and resolve hardware, software, and network issues for employees. Ensure all safety and quality stand

Conducts site visits & attends meetings with Engineers/Clients/Field Crew. Ability to multitask, prioritize, and work well under pressure to meet established deadlines. Assists with subcontract administration and permanent material suppliers through monitoring of correspondence, submittals, RFI’s,

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

Ability to manage job scheduling and job progress in an efficient and cost-effective manner, with a strong focus on quality. Communication skills, both verbal and written, are important aspects of the PM position. This position will work closely with our sales team, installation team, and clients to

You will plan, organize, and control resources and processes to achieve project objectives within scope, schedule, quality, and budget constraints. Identify and mitigate risks, manage scope changes, and ensure quality assurance. Drive knowledge management initiatives aligned with business strategy.

Collaborate with product and engineering teams and R&D management to define the technical roadmap, review architecture and mentor junior engineers. DoiT unites as Many Do'ers, One Team, where diversity is more than a goal—it's our strength. Demonstrated ability to combine hands‑on coding with ar

Attend night aiming sessions with project manager or designer. Ability to reference and follow plans for installation. Ability to review basic assembly instruction manuals to assemble product.

Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any

Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any

PAY AND BENEFITS From the day you start, youll receive: Competitive salary Potential to earn a bonus upon enlistment Free health insurance Free housing A retirement plan Paid training College credit EDUCATION OPPORTUNITIES Navy College Program and Tuition Assistance Post-9/11 GI Bill, up to 100% tui