Trabajos it engineer en Fort Worth, TexasCrear alertas

Job Description JOB SUMMARY The SMT Engineer will be responsible for the setup, programming, troubleshooting, and continuous improvement of SMT equipment used in the PCB assembly process. The role involves ensuring smooth production workflows, minimizing downtime, optimizing machine performance, and achieving high-quality production standards. The SMT Engineer will collaborate with production teams, quality control, and design engineers to address any issues in the manufacturing process and improve efficiency. RESPONSIBILITIES • Program and set up SMT machines (pick-and-place, reflow ovens, screen printers)., • Troubleshoot and resolve production issues, focusing on improving yields and reducing defects., • Maintain and perform routine repairs on SMT equipment., • Drive continuous improvement in production processes, ensuring efficiency and quality., • Document processes, log machine setups, and maintain quality control standards., • Bachelor's degree in an engineering field, • 3+ years of experience in SMT process engineering in the electronic manufacturing environment., • Hands-on experience with SMT equipment such as pick-and-place, through-hole soldering systems, reflow ovens, screen printers, and AOI/inspection systems., • Familiarity with SMT components, solder paste, and reflow profiling., • Experience with lean manufacturing principles and Six Sigma methodologies., • Strong work ethic and drive to succeed., • Ability to work in a fast-paced, autonomously driven, and demanding start-up atmosphere. • Physical demands: while performing the duties of this job, employee may be standing most shift with machine use and will interact with other employees/visitors. May be required to lift up to 5 pounds. May lift trays or push carts of PCB assemblies from one department to another. May lift/push feeders/equipment from time to time. TYPICAL WORKING CONDITIONS • Works in an ESD manufacturing environment., • Lift/carry/push/pull up to 20lbs., • Stooping, bending, stretching, and reaching outward and over their head., • This position may require extended periods of sitting, standing, and walking., • Personal Protective Equipment (PPE) when necessary. Adhere to all organizational information security policies and protect all sensitive information in accordance with organizational policy and federal, State, and local regulations. The foregoing description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, efforts, or working conditions associated with the job. It is intended to be an accurate reflection of the general nature of the level of the job.

Job Description Suzhou Junchuang Auto Technologies, established in June 2005, is headquartered in Mudu Town, China - a historic town with a 2,500-year legacy on the shores of Taihu Lake. The company is committed to attracting top talent and fostering a culture that values family, innovation, and excellence. Our goal is to be the world-class automotive supplier, guided by our dedication to the highest standards of professionalism, technology, quality, and satisfaction. We prioritize not only our customers but also the well-being and satisfaction of our employees, ensuring a supportive and rewarding work environment. Benefits: • Full medical/health benefits, • 401k Retirement plan, • Salary: $70,000 to $75,000 per year Our work environment includes both modern office spaces and advanced manufacturing facilities specializing in plastic injection molding technology. In our contemporary office setting, you'll collaborate in a professional atmosphere featuring state-of-the-art IT infrastructure and ergonomic workstations. On the manufacturing floor, you'll find a cutting-edge plastic injection molding plant where precision and innovation come together. While we ensure top-notch quality in component production, you may occasionally notice mild odors and temperature variations typical of the manufacturing process. Safety is a top priority, with stringent protocols in place to ensure a secure workplace. The EHS Specialist/ Facility Engineer is responsible for developing, implementing, and maintaining environmental, health, and safety (EHS) management systems to ensure compliance with federal, state, and local regulations. This role involves overseeing EHS standards for construction, renovation, and operational activities, conducting safety audits, coordinating training, and maintaining compliance with relevant reporting requirements. The EHS Engineer also supports plant services management, ensuring the effective maintenance and operation of equipment and energy-efficient practices. Requirements/Responsibilities EHS Management Work • Develop and maintain company EHS flowcharts and management systems, • Oversee EHS requirements for new construction, renovation, and expansion projects, • Investigate workplace incidents/injuries and manage corrective action follow-up, • Coordinate EHS emergency drills and training programs, • Review and supervise high-risk work operations, • Conduct safety hazard audits with follow-up and closure management, • Liaise with regulatory agencies including EPA, Fire Department, and OSHA Plant Services Management Work Requirements: • Recent graduate, • Certified Safety Professional (CSP) certification required, • Proficient in Microsoft Office Suite Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description Client Details: We manufacturer of lighting fixtures, ceiling fans, and home décor products. With over 40 years of industry leadership, we continue to expand our technological capabilities across our manufacturing and corporate environments. This is an ONSITE role. Position Overview The Senior Network Administrator or Network Engineer is responsible for designing, implementing, maintaining, and securing the company’s network infrastructure. This includes LAN, WAN, VPN, wireless, security systems, cloud networking, and monitoring. This position is on-site and requires hands-on technical expertise in enterprise networking and system security. Requirements Preferred Qualifications • Certifications such as CCNA, CCNP, CompTIA Network Plus, CompTIA Security Plus, Fortinet NSE, Azure Network Engineer Associate, or AWS networking certifications., • Experience working in manufacturing or industrial IT environments., • Experience with automation platforms such as Ansible or Terraform., • Knowledge of VoIP systems, wireless controllers, and SD-WAN solutions. Required Qualifications • Bachelor’s degree in information technology, Computer Science, or a related field is preferred; however, an equivalent combination of education and directly related professional experience may be considered in lieu of a formal degree., • 7 years of experience in network administration or network engineering., • Exp with TCP/IP, routing, switching, VLANs, subnetting, and network segmentation., • Hands-on experience with Cisco, Fortinet, or Juniper network devices., • Experience configuring firewalls, VPNs, VLANs, IDS, and IPS systems., • Working knowledge of SIEM tools and security log analysis., • Experience with Azure or AWS networking including VPCs, VPN gateways, and hybrid network integration., • Proficiency with network monitoring tools such as SolarWinds, PRTG, or Nagios., • Strong troubleshooting and packet analysis skills using tools such as Wireshark., • Ability to work on-site in Fort Worth, TX Benefits What We Offer • Competitive salary and performance-based incentives., • Medical, dental, and vision benefits., • 401k with company match., • Paid time off and holidays., • Training and certification reimbursement.

Job DescriptionDescriptionGD Energy Products – New Name, Same Legacy The company you have known as Gardner Denver High Pressure Solutions has a new name – GD Energy Products. Now for more than 160 years, we have made it our business to lead the industry with unmatched products and services; and I can promise that while our identity may change, deep down, who we are as a company never will. GD Energy Products is looking for a Maintenance Mechanic to work in Fort Worth, TX. When joining GD Energy Products, you will be eligible for many of our competitive benefits, including: vacation, 401K matching, paid holidays, sick days, full medical/dental/vision benefits, short/long term disability, maternity/paternity leave and many more! Job Summary: The Maintenance Mechanic will oversee the performance and maintenance of large production machinery. Duties/Responsibilities: • Performs preventive maintenance inspections and service on machines., • Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary., • Oils and lubricates moving parts on machines to ensure effective performance., • Records and reports damaged, worn, or broken parts., • Orders and installs replacement parts for machines., • Identifies the causes of unexpected breakdowns of machines., • Repairs broken machines quickly and efficiently., • Prepares reports documenting work performed., • Cleans, organizes, inventories, stocks, and otherwise maintains shop areas, parts, tools, and supplies., • Coordinates with managers to schedule regular maintenance on machines., • Collaborates with product manager or plant engineer regarding new products being added and modifications that will be required., • Makes necessary modifications and implements tests runs; confers with product manager regarding test results and makes additional alterations to machinery as required., • Regular attendance and compliance with all Company policies and rules is an essential function for the job. Overtime, including potential for nights and/or weekend shifts may be required., • Performs other related duties as assigned. Required Skills/Abilities: • Mechanically inclined with great problem-solving skills., • Works well independently and with others., • Good communication skills., • Organized with attention to detail., • Ability to work in a fast-paced and stressful environment. Education and Experience: • Experience in industrial maintenance work repairing and maintaining heavy industrial equipment. (strong preference for experience in pumps or similar manufacturing environment), • Some vocational or community college with related coursework or equivalent experience, preferred. Physical Requirements:• Prolonged periods standing and walking. • Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Must be able to visually inspect machines., • Must be able to lift and carry up to 50 pounds. GD Energy Products is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, creed, age, sex, sexual orientation, gender identity, pregnancy, national origin, disability or protected veteran status, as well as any other characteristic protected by applicable law, regulation or local ordinance. For more information about your rights under the law, see

Job DescriptionWe're looking for a courteous, detail-oriented maintenance engineer to provide our guests with a five-star experience. You'll be in charge of overseeing the property’s overall upkeep and carrying out routine processes to make it fully functioning, pleasurable, and safe. Candidates for this position must be active, imaginative, and consistent in their commitment to assist our guests. If this describes you, we'd want to hear from you. If you’re a problem solver ready for a career in the hospitality field, apply today!Compensation: $19 per hour Responsibilities: • Adhere to all engineering safety norms and procedures, • Keep an open line of communication with other team members and staff, • Handle maintenance issues as quickly as possible to assure guest satisfaction, • React to emergencies that happen before, during, and after your regular work shifts, • Collaborate with other personnel who will help you with maintenance tasksQualifications:, • Stellar communication, organizational, and interpersonal skills are needed, • A high school diploma or equivalent GED is required, • Ability to use web-based software, including facilities maintenance software preferred, • You will need 2-4 years of experience in a maintenance role, • This position requires occasional lifting up to 50 lbs.About Company Guests applaud the newly renovated guestrooms at Doubletree by Hilton Fort Worth S Conference Center, featuring luxurious new bedding and flat-screen televisions. Step into our hotel to feel the warmth of modern décor merging contemporary and Texan influences. Situated off I-35W at I-20, six miles from Downtown Fort Worth and within 30 minutes of both DFW Airport and Arlington, this hotel provides a central location, plus perks that assure the utmost in comfort. With Stockyard's history, Sundance Square excitement, and the highlights of the Ft Worth Cultural District only moments away, guests enjoy an endless supply of entertainment near the hotel's Fort Worth, TX location. A trip to nearby Arlington affords even more fun at attractions like Six Flags Over Texas and the famed Cowboys Stadium.

Job Description PDSE / PDS - 4 (East) - Power Delivery Substation Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Looking for a place to increase your skills and be a difference maker? … a career to be passionate about while enjoying great benefits and pay within a family-based culture. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power engineering design at Mesa Associates, Inc. Mesa is seeking an experienced (8 to 14 years) BSEE or BSME for a position supervising Power Substation Design. The successful candidate shall have extensive experience in the field of Power Substation Engineering Design within the US Power industry. A BSEE or BSME from an ABET accredited University is required. The successful candidate will work in an in-office (hybrid basis), collaborative team environment to provide engineering design support for physical design of Power Substations ranging in voltage levels from 34.5K to 765kV. As an Engineering Supervisor, this individual will be expected to be skilled in all aspects of Physical Substation design and able to thoroughly evaluate Physical design project packages for adherence to standards and for constructability of design. Must have strong communication skills (written and verbal). Serve as Texas based liaison for Knoxville, TN based Backoffice. Familiarity with Bentley MicroStation and/or Autodesk Inventor would be considered a plus. Proficiency in verbal and written communication is required. Registration as a licensed Professional Engineer would be considered a plus. Education/Experience: • A BSEE or BSME from an ABET accredited University (required), • Perform Physical Substation design with a high degree of accuracy (Quality), • Work well as a team member as well as individually, • Local (Texas) supervisory responsibilities, • Use MicroStation to create the assigned deliverables, • Interact with the Customer and meet their schedule and budgeting requirements, • Mentor junior Engineers/Designers, • Review work of other team members At this time, Mesa cannot transfer nor sponsor a work visa for this position. If you meet the requirements for this fast-paced, rewarding career opportunity, please apply. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Job Title: Mechanical Engineer Commercial / Healthcare Construction (HVAC / MEP Systems) Location: DFW Metroplex, TX (On-site) Employment Type: Full-Time Salary: $100,000 - $150,000 Annually (Based on experience) Company Introduction This opportunity is with a nationally recognized construction firm specializing in large, complex commercial and healthcare projects. The company is known for its strong safety culture, technical expertise, and ability to execute high-visibility work across the country. The team is currently delivering a major $500M healthcare campus in Fort Worth, along with several significant projects throughout the DFW region. As an employee-owned organization, it offers long-term stability, a collaborative atmosphere, and meaningful opportunities for professional advancement. Role Overview The Mechanical Engineer will oversee and execute the mechanical and HVAC components on large commercial and healthcare construction projects. Responsibilities span design coordination, estimating, subcontractor oversight, field installation reviews, and commissioning support. The ideal hire is someone with strong HVAC technical knowledge, hands-on experience with large-scale ($200M+) commercial or healthcare builds, and the ability to bridge engineering intent with real-world field execution. This role is ideal for an engineer who wants meaningful, technically challenging work within a highly respected organization. Core Responsibilities • Develop and manage mechanical and HVAC scopes of work, ensuring systems meet performance, quality, and schedule expectations., • Prepare and evaluate mechanical estimates, system analyses, and budgets during reconstruction., • Review mechanical design options and recommend cost-effective, high-performance solutions., • Coordinate system design and installation with project teams, subcontractors, and field operations., • Conduct field inspections to verify quality, compliance, and progress., • Support and manage commissioning efforts, including testing, balancing, and system verification., • Review submittals and shop drawings for accuracy and constructibility., • Participate in value engineering discussions to optimize system design and project cost., • Collaborate closely with internal and external stakeholders to ensure project alignment., • Bachelors degree in Mechanical Engineering, Architectural Engineering, or related discipline (or equivalent experience)., • Minimum 5 years of mechanical engineering or construction experience, preferably with a general contractor or design-build firm., • Demonstrated success on large-scale commercial projects valued at $200 million or more., • Strong technical knowledge of HVAC systems, including design, installation, and commissioning., • Proficient in reading and interpreting construction drawings and specifications., • Familiarity with project scheduling, coordination, and construction management tools., • Excellent communication and problem-solving skills, with the ability to lead collaboration across disciplines., • Valid drivers license and flexibility to work across the DFW region as needed., • Professional Engineer (PE) license or progress toward licensure. (Preferred), • Experience on healthcare or hospital construction projects. (Preferred), • Familiarity with BIM coordination and energy-efficient system design. (Preferred), • Experience managing mechanical subcontractors and vendors. (Preferred), • Competitive salary based on experience., • Car allowance provided for project-related travel., • Annual performance bonus., • Comprehensive benefits package including:, • Medical, dental, and vision insurance, • 401(k) with company contributions, • Employee Stock Ownership Plan (ESOP), • Life and disability insurance, • Paid time off, holidays, and parental leave, • Professional development and continuing education opportunities., • Long-term growth potential within a respected, employee-owned organization.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson is seeking an Electrical Instrumentation Engineer for our Data Center Facilities Engineering Design team to help support the design development of the instrumentation and control systems associated with electrical distribution systems. The Electrical Instrumentation Engineer will provide technical leadership and expertise with respect to system modernization and maintenance, will create plans, schematics, and one-lines, and will lead and support small and large instrumentation and controls projects with a focus on reliability and technical execution. Primary Responsibilities • Support instrumentation-related threat mitigation action plans and incident management investigations and actions, • Ensure the smooth real-time operation of the instrumentation system by performing and analyzing technical studies and data, developing strategies and alternatives, and establishing and documenting operating procedures, • Works within a multi-discipline team to develop efficient and reliable electrical design packages for low and medium voltage electrical infrastructure, • Lead the Instrumentation and Control design for projects and define control scheme in alignment with industry and client standards to satisfy power system reliability requirements, • Review data sheets, control block diagrams, and functional/ operational descriptions for all instrumentation related projects, • Provide technical leadership and serves as a subject matter expert, delivering professional and technical guidance on programs, projects and initiatives., • Mentor and support team members, offering guidance and encouraging initiative while helping them develop as engineers and technical leaders. Required Qualifications • Bachelor's degree in Electrical Engineering, or Instrumentation and Control Engineering, • 7+ years' experience in instrumentation and control systems within the industrial electrical and/or hyperscale data center sector, • Expertise in the design, application, and implementation of distribution and generation instrumentation and control systems for building level infrastructures, • Ability to demonstrate a thorough understanding of the industry standards that governs the selection, testing and performance of instrumentation sensors and control schemes, • Ability to demonstrate a thorough understanding of global standards such as ISA, IEC, IEEE and other related to instrumentation and control systems, • License Professional Engineer (P.E.) #LI-DNI #Olsson #Remote Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Construction Engineer to join our Construction Team in our Dallas-Fort Worth office. Candidates must have a bachelor's degree in civil engineering and at least ten years' experience with water/wastewater civil projects. Experience in the Tampa area working with Hillsborough County, Pinellas County, Tampa Bay Water, City of Tampa, and City of St Pete clients preferred. Trench and Safety and 40 Hour OSHA training is a plus. Individuals must have strong communication skills, be self-motivated and able to work well with others. A flexible hybrid-remote work schedule is available after 90 days of employment.Typical responsibilities include: • Act as the on-site liaison with client and community, • Maintain excellent client relations, • Conduct field inspections, • Coordinate/communicate with contractors regarding construction project activity, • Coordinate with Engineer of Record as needed, • Review and/or prepare inspection daily reports, • Monitor construction operations, • Organize and maintain construction documentation with cloud-based document control interface, • Develop a detailed understanding of plans and specifications, • Assist Project Manager with contract requirements, • Coordinate in-office services in the review of shop drawings, requests for information and proposed changes, • Review shop drawings, where appropriate, • Help address Field Changes, as appropriate, • Lead or assist with Requests for Information responses, • Lead or coordinate claims analysis with project team members and client, • Identify and help mitigate potential project risks, • Develop retroactive or forward-price scope of work changes and/or claims by multiple methodologies, • Review and interpret construction CPM and Gantt Chart type schedules, • Assist with recurring client or regulatory reporting, • Attend or facilitate project progress, coordination, and pre-construction type meetings, • Prepare meeting minutes, • Mentor less experienced project colleagues, • Act as senior resource for field inspectors, • Attend seminars and/or training courses, • Maintain a safe working environmentEducation:, • Bachelor of science in civil engineeringSkills/Experience:, • 10+ years of water/wastewater heavy civil project experience required, • Experience in the DFW area working with county and municipal clients preferred., • Trench and Safety and 40 Hour OSHA training is a plus, • Valid driver's license

Job DescriptionDescription: Position Summary: Responsible for coordination of all technical activities on assigned projects, as it pertains to IFE/Electrical or Actuation systems. Plans, schedules, conducts, and coordinates assigned electrical engineering work; monitors work for compliance to applicable Airframe requirements, IFE supplier requirements, customer requirements, accepted engineering practices, as well as RECARO standards; ensures effective communication and coordination on assigned projects between all disciplines and all other project participants. Responsible and accountable to ensure that all assigned personnel are coordinating their activities with other project participants and that the requirements of the Contract are being satisfied. Essential Duties and Responsibilities include the following, other duties may be assigned: • Coordinates all aspects of the electrical design and integration of electronics into aircraft seats. This includes the coordination of Designers, Design Engineers and coordination with Project Engineers, Certification Engineers and Product Support personnel., • Plans, schedules and tracks engineering tasks; provides detailed reports to Program Management and Engineering Management., • Summarizes technical customer requirements, communicates this to the team and ensures customer expectations are being met., • Creates Acceptance Test Procedures (ATPs), thru the review and interpretation of IFE/Electrical Vendor testing procedures and testing hardware., • Creates Grounding Bonding Calculations (ELDs) thru the calculations of resistance of electrical components. Resistance calculated thru the resistance of the ground path from possible ground fault to "Earth Ground" point., • Completes root cause analysis on MRB (Material Review Board) actions, and presents resolutions to the Engineering, Quality and Operations Departments., • Interfaces with outside suppliers (IFE/Electrical) during the design process., • Effectively participates and contributes in telecoms with overseas engineers and program management by applying manufacturing engineering knowledge, discussing manufacturing issues, and also suggesting potential seat development topics and innovations., • Experience in the use of Airframe (Boeing/Airbus) regulations, as well as the use of parts lists with high variant diversity is desired., • Must have advanced knowledge and understanding of aircraft seat manufacturing processes, in order to ensure that the appropriate manufacturing procedures are utilized to meet the requirements of individualized client specifications., • Creation of electrical block diagrams or Schematics by interpreting IFE/Electrical Vendor drawings, documentation and specifications., • Coordinates design meetings with Project Engineers to discuss engineering issues, including design changes and requests from customers., • Responds to concerns of customers by making changes, in regards to IFE/Electrical component integration, in a manner that meets customer expectations and are in conformance with applicable regulations under the supervision of the Project Engineer., • Supports Purchasing and Production by providing bills of materials and documentation to support sourcing of components and their integration. Requirements: Education/Experience: • Bachelor’s Degree required in Electrical or Manufacturing Engineering with 3-7 years of experience or a combination of education and equivalent experience., • Experience in the design, integration and certification of Electrical Components installed in Aircraft interiors is required., • Advanced knowledge about aircraft documentation systems for after sales (CMM, SB) and aircraft configuration control systems is desired., • Excellent oral and written communication skills required. Multicultural exposure is a plus., • A minimum of 2 years of experience in CATIA V5 and electrical design/wire routing modules within CATIA V5 or similar program is required., • Knowledge of PLM based database systems such as Teamcenter, Agile or Enovia is required., • Experience with Microsoft Office applications (Word, Excel, PowerPoint, etc.) is required., • Good understanding of software programming and software configuration control is a plus.

Job DescriptionJoin Lapmaster-Wolters, a leading company in the semiconductor industry where innovation meets precision. We are seeking a service engineer who will be specializing in wire slicing equipment for semiconductor manufacturing, providing technical support, installation, and maintenance for the highly specialized equipment used for wafer slicing different materials. We’re seeking a dedicated Service Engineer to become a vital part of our team, to support a customer based in Fort Worth, TX. If you enjoy solving complex technical challenges and delivering exceptional service, this role offers an exciting opportunity to work with cutting-edge technology in a collaborative environment. Role Overview As a Service Engineer, you will be the frontline technical expert providing maintenance, troubleshooting, and support for sophisticated semiconductor equipment at client sites. Your work will ensure optimal performance and uptime, directly impacting production quality and efficiency. Mechanical, electrical, and software troubleshooting skills are required along with a willingness to travel for training, possibly for several weeks at a time during the onboarding. Travel up to 50% both Domestic and International at times based on business needs. Responsibilities • Perform on-site installation, calibration, maintenance, and repair of semiconductor manufacturing equipment., • Troubleshoot and resolve technical issues quickly and effectively to minimize downtime., • Collaborate with engineering and client teams to provide timely solutions and technical guidance., • Responds to customer inquiries and phone calls., • Manage special projects as required, • Document service activities, report on equipment status, and recommend improvements., • Travel to client locations, delivering outstanding service and support., • Associates degree or technical certification in mechanical, electronics, engineering, or other applicable fields of study; bachelor’s degree in engineering or technology preferred., • Strong mechanical and electrical troubleshooting skills., • Experience working with semiconductor equipment or similarly complex machinery is highly desirable. Wafer slicing equipment experience preferred., • Ability to work independently in a field service environment with excellent problem-solving skills., • Effective communication skills and a customer-focused approach., • Willingness to travel as needed., • Competitive salary and benefits package., • Hands-on experience with state-of-the-art semiconductor technologies. • 401(k) with Matching, • Medical Insurance (Company contribution for Dependents), • Dental insurance, • Vision insurance, • Company Paid Short-Term and Long-Term Disability, • Company Paid Life & AD&D, • Vacation, Sick, Holidays, • EAPMust be legally authorized to work in the United States without the need for employer sponsorship, now or at any time in the future. Equal Employment Opportunity Employer (EEO) Company Description: Lapmaster International, LLC is a leading international precision machine tool builder headquartered in Chicago’s Northwest suburbs near O’Hare Airport. Our diverse team works with a broad variety of industries and technologies. Our technical expertise includes Motion Control, Robotics, Automation, Machine Design, and Application Engineering. Our customers include small, mid-sized and Fortune 100 companies in a variety of industries including Automotive, Aerospace, Semiconductor, Electronics, Bearings, Optics/Electro-optics, Pumps, Valves, Compressors, and Medical Devices. Our business model is to utilize leading technologies and exceptional engineering talent coupled with outstanding customer service to solve manufacturing and precision machining problems. Since 1948, industry has relied on Lapmaster to solve the most challenging precision surfacing problems. With over 60 years of experience, Lapmaster has a proven history of successfully developing cost effective processing solutions for virtually any application requiring precision sizing, flatness, parallelism, roundness, straightness, or surface finish. Lapmaster serves the Fine Grinding, Advanced Materials, Precision Optics, Bore Honing and Finishing, Lapping/Polishing and Metallographic markets through an expanding network of sales and services offices located throughout the world. Sales and technical service is available either through local Lapmaster Sales Representative or through our main Sales and Technical Services Centers located in Mount Prospect, IL, Plymouth, UK, Chennai, India, Tokyo, Japan and Shenyang, China. Competitive Benefits Package for Full Time employees: • 401(k) with Matching, • Medical Insurance (Company contribution for Dependents), • Dental insurance, • Vision insurance, • Company Paid Short-Term and Long-Term Disability, • Company Paid Life & AD&D, • Vacation, Sick, Holidays Equal Employment Opportunity Employer (EEO) It is the policy at Lapmaster International to provide equal employment opportunities and affirmative action to all qualified individuals. All personnel actions, including, but not limited to, compensation, benefits, recruitment, hiring, training, and promotion of persons in all job titles, are administered without regard to race, color, sex, sexual orientation, gender identity, age, religion, national origin, protected veteran or disability status, and all employment decisions are based solely on valid job requirements. In addition, employees and applicants are protected from harassment, threats, coercion, intimidation, or discrimination EEO is the Law (English) Recruiter Policy: Lapmaster International, LLC (aka Precision Surfacing Solutions) “the Company” has an internal recruiting function. The Company may supplement that internal capability from time to time with assistance from temporary staffing agencies, placement services, and professional recruiters (Agency). Agencies are hereby specifically directed NOT to contact employees of the Company directly in an attempt to present candidates. The Company’s policy is for the internal recruiting team or other authorized personnel to present ALL candidates to hiring managers. Any unsolicited resumes sent to Lapmaster International, LLC from a third party, such as an Agency, including unsolicited resumes sent to a Company mailing address, fax machine or email address, directly to Company employees, or to the resume database will be considered Company property. Lapmaster International LLC, will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Lapmaster International LLC, will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. View JazzHR Privacy Policy Powered by JazzHR bGWrYKWThO

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Professional Engineer to join our Water department to improve infrastructure with our Dallas or Fort Worth staff. Candidates must have a preferred bachelor's degree in civil and/or environmental engineering and five to ten years of related experience. PE license is required. Excellent technical writing, organization and communication skills are essential. Candidates must be self-motivated and able to work well with others. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide technical planning, design, permitting, and construction support on various water utility projects that may include collection system, pump station, wastewater treatment, reclaimed water, water treatment, water distribution, and various other ancillary civil engineering projects., • Attend client, public, project and staff meetings including client progress, plan review, preconstruction, etc., • Project Management, • Provide supervision and mentorship to entry-level staff, • Prepare engineering calculations and supporting analysis of alternatives, • Prepare design reports and construction plans using local and state standards, • Review construction plans using AutoCAD 3D, Civil 3D and Revit, • Prepare/assist with permit submittals, • Prepare preliminary project cost estimates and evaluate quantities, • Assist with/review scope, budget, and schedule of new project tasks, • Conduct on-site inspections as needed, • Assist in the preparation of proposals, • Participate in associations, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering preferred, • Bachelor's Degree in Engineering requiredSkills/Experience:, • 5 to 10 years of related experience required

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Natural Gas Engineer to join our ICE Team to improve infrastructure in our Southern offices. The candidate must have a bachelor's degree in Civil or Mechanical Engineering, and five to ten years of similar work experience. Experience with natural gas and other utilities is preferred. The candidate must also be self-motivated, work well with others, and have excellent writing, organizational, and communication skills. A flexible hybrid-remote work schedule is available after 30 days of employment. Typical responsibilities include: • Design various natural gas projects including distribution mains, transmission pipelines, metering & regulating facilities as well as launcher/receiver assemblies., • Perform civil site design, trenchless installation design, utility conflict analysis, and traffic control plan design., • Prepare design reports and construction plans using client, local, state, or other applicable standards., • Coordinate preparation of specifications and permit submittals., • Prepare preliminary project cost estimates and evaluate quantities., • Document design changes and communications., • Conduct on-site observations as needed., • Prepare project status and other reports., • Assist in the preparation of proposals., • Assist Project Managers as needed., • Attend client, public, project, and staff meetings including client progress, plan review, preconstruction, etc., • Attend seminars and/or training classes., • Maintain excellent client relations., • Maintain a safe working environment. Education:, • Bachelor's Degree in Civil or Mechanical Engineering requiredSkills/Experience:, • 5-10 years of experience is required., • Experience with natural gas or other utilities preferred., • Experience with AutoDesk Civil 3D is preferred.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Senior Design Engineer to be an integral part of the team designing and building a new metal, alloy, and magnet-making facility. This is a rare opportunity to have a central role in the development of a greenfield advanced manufacturing facility, and helping to define the future of American manufacturing. This position will require a combination of both strong technical skills to design the machines needed for material movement and plant layout, and a hands-on nature to ensure that the successful sourcing, construction, and commissioning of the designs. The new facility contains a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Senior Design Engineer have a diverse technical background with the ability to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The successful candidate will be passionate about pairing design work with much of the actual “dirty hands” work to ensure that everything works as intended initially and over time. Position Responsibilities: • Contributes to the Physical Design Engineering team as a senior member., • Works closely with broader process engineering, controls engineering, and manufacturing teams to create automated processes with an integrated process flow., • Delivers finished designs, detailed drawings, and engineering specifications for supplier bidding, and leads vendor compliance efforts after purchase., • Supports and leads the design, manufacturing, installation, and commissioning activities to deliver projects from concept to fully operational in the plant., • Leads and mentors engineers and specialists., • Conducts and participates in technical design reviews, supplier evaluations and internal and external compliance audits to relevant industrial standards (ASTM, ISO etc)., • Performs CAD, FEA, and durability simulations as required of concept designs to provide recommendations for physical prototype candidates, execute testing, and ensure successful commissioning and ongoing operation., • Reviews team designs and apply PE stamp as required., • Researches and implements automation systems, detailed designs; and directs component sourcing, fabrication, and deployment of manufacturing equipment., • Works closely with EHS to ensure that all work is done to ensure world class health and safety, and full compliance with relevant environmental regulations., • Documents all work for seamless handoff to end users, prepares technical reports, and follows all corporate change management procedures., • Leads and supports continuous improvement activities to produce ongoing, meaningful improvements to worker safety, process uptime, and product quality., • BS or MS in mechanical engineering, chemical engineering, or related field., • At least 7 years process design and automation experience within a manufacturing environment., • Knowledge in automation of industrial processes and materials handling., • Experience in machine design and testing., • Knowledge of statistical process control, and experience in designing control systems., • Excellent spatial visualization and reasoning skills, with a history of conceiving of successful creative designs for bespoke problems., • Broad knowledge and experience across multiple CAD tools., • Project Management and hands-on approach to projects., • Expert level user of Microsoft Office suite., • Excellent written and verbal communication skills., • Sound knowledge of Process Safety., • Good understanding of human factors in manufacturing. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Position Description/Direct Hire The Project Engineer is responsible for management and implementation of construction project controls, project administration, document management and technical coordination of work on a given project. Essential Duties and Responsibilities Develop a comprehensive working knowledge and understanding of the contract documents (including the Company contract with the client, plans, specifications and applicable codes). Ensure strict adherence to safety, ethics and compliance requirements at all times. Overall responsibility for communication of information amongst all project team members. Coordinate and maintain procedures with the design professionals, consultants, owner and subcontractors for information flow, approvals, meetings, reporting, applications for payment, etc. Work with preconstruction, estimating and purchasing in development of Guaranteed Maximum Price or initial project budget. Coordinate preconstruction efforts as it relates to Project Engineering and the specific project needs. Conduct thorough construction document reviews and examine all documents for constructability and QA/QC. Bring all concerns to the attention of the appropriate design professional for resolution. Participate in preparation of various studies, recommendations for materials and methods, and cost estimates. Work with Project Manager in development of scopes of work for Source Subcontract Development. Prepare a detailed contract items list including all significant items required for the construction of the project. Develop trade scope of work documents for bid packages, major material and equipment purchases. Prepare a procurement schedule for subcontractors, major material and equipment purchases to ensure timely buy-outs and overall compliance with the construction schedule is maintained. Support the supervising Project Engineer or Project Manager in managing the financial status of the project including preparation of project status and accuracy of financial reports. Participate and document all job meetings, owner-architect and coordination meetings. Manage the subcontract change order process including review of subcontractor estimates, negotiate change orders, obtain required owner approvals and preparation of subcontract change orders. Manage document control and design updates of the project to include posting and publishing of design updates, changes, revisions and notifications. Process pay applications to the client as well as subcontractor pay applications. Manage project close-out, including securing warranties, guarantees, and acceptance of work, subcontract and vendor close, final payment and records retention. Coordination of field activities performed by subcontractors when required Qualifications Bachelor’s Degree in a Construction Management, Engineering or Technical related Degree: and/or a minimum of five (5) years of Project Supervision/Engineering experience in Commercial General Contracting or Construction Management Possess experience in Construction Cost Estimating, Purchasing, Scope Development, Project Engineering and Subcontractor coordination Possess experience in Project Scheduling development and implementation Possess strong verbal and communications skills Proficient in computer applications, including Microsoft Office Software and other required administrative software for Project delivery Minimum OSHA 10 Hour Training Demonstrated leadership and interpersonal skills Able to function successfully in a face paced, team atmosphere Physical Demands and Work Environment Performance of job duties may require climbing temporary or permanent stairs, passenger usage of construction hoists/elevators and climbing ladders. Work Environment may include existing on high elevated surfaces such as roofs, elevated platforms, swing stages, loud machine/equipment influenced areas, areas with high decibel banging and dust particles. Company DescriptionSpecialized Recruiting Division of Express Employment Professionals Recruiting Division of Express Employment Professionals\r\n

Job Description We are RED Group. And We're Thinking Ahead. RED Group is an Industrial Control Systems (ICS) technology development and integration firm specializing in Process Automation, IT/OT Consulting, and Industrial Cybersecurity. We stand out in experience and expertise. We are committed to an employee-centric culture of success where we put our people first and give our staff the opportunities and push that they need to succeed and improve. As a result, they give their utmost to help our clients and get better at what they do each day. Our mission is to add value to our clients' organizations by selecting and deploying the proper resources and technology to ensure their goals are realized. Our team of Engineers, Consultants, Programmers, and Technicians provide the valuable expertise necessary for efficient and secure ICS/OT environments. Our North Texas office continues to expand and we are seeking a driven Sr. Industrial Control Systems (ICS) Engineer to become an integral part of our team. Step into a dynamic role that blends in-office collaboration with on-site client support, offering the ideal mix of variety and challenge. If you're ready to make an impact, now is your chance to TAKE CONTROL and join our team! This role supports active, ongoing projects that require local travel. About the Role The Sr. Industrial Control Systems (ICS) Engineer is responsible for the implementation of control systems and DCS/PLC/SCADA programming. This includes a working knowledge of Electrical, Instrumentation, and Industrial Control Systems/IT - specializing in design, development, programming, integration, troubleshooting, commissioning, start-up and control system optimization. The Sr. Industrial Control Systems Engineer is expected to be a technical lead on projects providing technical guidance to less experienced engineers and support their professional development. Key Responsibilities Experience in more than one of the following areas is preferred, but not required: • Program and configure PLC, HMI, DCS and SCADA systems., • Design, configuration, integration, and implementation of automated equipment., • Develop software/hardware design specifications., • Design, write, test and document PLC/HMI software., • Create Control Narratives, Logic Diagrams, Cause & Effect Diagrams, and Network Diagrams., • Develop and execute control system validation/testing protocols., • Troubleshoot, test, and start-up control systems onsite., • Participate in site visits and meetings as required by project., • Consult with clients to ensure project success., • Interact with project managers/team leads, clients, and other third parties., • 8+ years of control systems design and programming experience, focusing on PLC, HMI, and SCADA systems preferred., • Modicon PLC programming languages: Control Expert, Unity, Concept., • Rockwell Automation Software: Logix Designer, Studio5000, RSLogix5000, RSLogix500., • OIT/HMI software development: Wonderware, Intellution, FactoryTalk ME/SE, VTScada, Ignition (Perspective & Vision)., • Experience with Ignition Software highly desired. Inductive Automation Ignition Core Certification Preferred; Gold Certification a Plus., • Experience with common control system documents (P&IDs, I/O Lists, C&E Matrices, etc.)., • Experience with control systems instrumentation and end elements basic operation and electrical interfaces., • Experience with start-up and commissioning of automation systems., • Experience with control system networking technologies (including industrial communications protocols) and PC networking technologies., • Experience with motor control systems and variable frequency drives (VFD)., • Must be able to travel to customer sites in the surrounding area as needed to support project and client requirements., • Ability to partner with clients, vendors, and other team members to deliver projects., • Ability to manage multiple projects and priorities., • Strong interpersonal, verbal, and written communication skills., • Embrace our core values while enjoying a collaborative and engaging atmosphere:, • Be Dependable, • Cultivate Relationships, • Strive for Excellence, • Foster and promote a strong safety culture and follow company safety protocols. Culture. Growth. Opportunity. At RED Group, we believe that a thriving workplace starts with a strong, employee-centric culture. Our focus on our people ensures they have the resources, support and opportunities needed to excel. Our commitment to success drives outstanding results in our client engagements, with our team always striving for excellence. If you join RED Group, you'll enjoy: • A collaborative team environment that values your contribution., • Competitive benefits, flexible schedules, and hybrid remote work options., • The stability of a well-established company poised for exciting growth.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description We're in search of a Senior RCDD Designer, someone who can blend expertise and creativity to elevate our projects. In this role, you'll navigate complex designs using CAD/BIM software, spearhead the design for data centers and building systems, and oversee smaller projects to ensure our hallmark of excellence and innovation. Key Responsibilities: • Master CAD/BIM software to create detailed engineering designs, focusing on efficient data center/building cable routing, equipment layouts, and communication systems., • Serve as the design authority on projects, driving high-quality outcomes and pioneering solutions., • Lead smaller projects with meticulous attention to detail, overseeing each phase from inception to completion., • Represent Olsson's dedication to excellence and partnership in client meetings., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well with a team., • Excellent interpersonal and problem-solving skills., • Associate or Bachelor's degree in Drafting and Design preferred., • 6+ years of CAD/BIM experience; proficiency in Autodesk Revit and AutoCAD., • RCDD Licensure., • Demonstrated ability to design and layout complex engineering drawings, with a preference for experience in BIM 360, Navisworks, and Revit. #LI-DD1 Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionAt Baird, Hampton & Brown, our mission is building partners through creative, sustainable engineering solutions, and honest, long-term relationships. With over 30 years in the business, we understand that a solid foundation is necessary in every aspect of what we do. We support our team members in pursuing excellence in their fields and balancing their lives. We serve our clients with integrity, communication, and involvement at every stage. As a team member, you can trust BHB to champion our core values, which leads to healthy, mutually beneficial relationships as well as services of the highest caliber. We are currently seeking a full-time, exempt Graduate Civil Engineer. As an entry level position, the Graduate Civil Engineer, will learn how to work on civil projects for municipal governments and private developments. Working closely with Professional Engineers, Engineers-in-Training, and Designers, you will first develop the technical processes to create civil drawings under the direction of a Project Manager. During this time, you will also develop professional skills, learning the business and client side as well as the process to eventually manage the full scope of a civil engineering project. In this role you can expect to perform the following tasks. This is not an exhaustive list: • Analyze and interpret survey reports, maps, drawings, blueprints, aerial photography, and other topographical or geologic data to plan projects., • Plan and design transportation or hydraulic systems and structures, following construction and government standards using design software., • Analyze and produce designs for stormwater, sewer, pipeline, parking, sidewalks, roadway, etc. using design software., • Prepare site grading and utility plans, coordinating with municipal parties. Perform hydraulic calculations and prepare construction documents for permitting., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Degree in Civil Engineering from an ABET-accredited program, • Engineer in Training certification or the ability to receive in one year, • Any experience in designing for civil projects or performing calculations; land development, commercial, industrial, land development, retail, education, municipal, roadways, water resources, or utilities. Position Type and Schedule This is a full-time, exempt position, with an expectation to work 40 hours per week. BHB offers flexible scheduling options, including five 8-hour days or four 9-hour days with a half day on Friday morning. While the start and end times of the workday can be adjusted, employees are expected to establish and maintain a consistent schedule which must encompass the core business hours of 9am – 4pm. Although overtime is not required, it is requested at times to meet our clients’ needs. Benefits We believe that taking care of our employees and their families is vital to our success. For several years, BHB has been awarded the titles of "Best Place for Working Parents" and Zweig’s "Best Firms to Work For." BHB sponsors employee medical, dental, vision, short-term & long-term disability, and basic life insurance, as well as subsidizing a significant family portion. BHB also offers voluntary life and disability insurances, paid parental leave after 12 months of employment, a PTO bank immediately available, & 401(k) matching. We believe in lifelong learning: providing many internal & external training opportunities including formal & informal mentorship programs. We sponsor multiple professional & industry memberships, licensure, and leadership opportunities. More details regarding benefits will be provided during the interview process. Equal Employment Opportunity Baird, Hampton & Brown is an Equal Opportunity Employer. All employment decisions are based on qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, age, sex (including pregnancy & childbirth conditions), sexual orientation, gender, gender identity, expression, or status, mental or physical disability, genetic information, military or veteran status, citizenship, or any other status or characteristic protected by applicable law. Powered by JazzHR MzlJcjThTU

Job Description Who is Mother Parkers? We are one of the largest tea and coffee manufacturers in North America, with a mission to create a better beverage experience for our customers. As a leading customer solutions provider to some of North America’s largest retailers and foodservice chains, we use state-of-the-art technology and new product innovation to help our customers grow their business and deliver superior products to their clientele. Our team of coffee and tea experts are deeply passionate about what we do, proud of our 100+ years of business success, and excited about building a future with endless possibilities. Come join our team and work among the best, collaborate with high performers, and contribute to challenging work every day! The Role As part of the Fort Worth plant leadership team, with a mission to identify areas for continuous improvement, cost reduction, and performance enhancement, we have an opportunity for a Continuous Improvement Manager to join our team in Fort Worth, Texas. You will be responsible for developing, validating, and leading the Plant’s Continuous Improvement Program. You will play a critical role proactively identifying areas for improvement and the solutions needed to enhance our competitiveness and profitability, aligning the program to the Operational Excellence Roadmap. What you get to do: • Set direction. You will lead the Plant’s Continuous Improvement Program, ensuring it aligns with the Operational Excellence Roadmap as part of the strategic planning for the site in conjunction with the company as a whole. You will align CI initiatives with the site's key performance indicators, and lead focused efforts aimed at breakthrough and incremental improvements in process, department and/or line-specific opportunities that meet and exceed plant operational performance metrics SQCDPE., • Champion. You will utilize lean methodologies and tools to promote the extraction of dollars in play. You will identify where CI Systems are required to optimize manufacturing or transactional processes and design and implement the solution ensuring each system is scalable and sustainable., • Collaborate. You will work directly with the Senior Plant Manager and their teams to plan, set in motion, and oversee specific CI projects to drive the lowest possible operational cost. You will provide technical processing expertise to support yield improvement activities., • Build and execute a Continuous Improvement program. You will lead and manage value stream mapping activity for the site; and a comprehensive pipeline of improvement activities. You will ensure continuity of critical continuous improvement systems for each project and each value stream, for example, Kaizen, 5S, Visual Factory., • Measure and report. You will track CI progress and report to the business on a predetermined frequency. You will demonstrate and track key metrics of improvements in each activity, ensure the sustainability of projects, and report on the financial impact of cost savings opportunities., • Drive results. You will work with the company following the Lean/Six Sigma Framework as well as the framework for driving excellence in Maintenance ("Maintenance Excellence Program"). You will:, • Balance prioritization to optimize results across the Operational Framework SQCDPE., • Leverage benchmarks to identify objectives., • Ensure sharing and standardization of best practices., • Work closely with the engineering and processing teams to drive efficiency and yields in processing and packaging operations., • Propose and implement new methods and processes for existing production systems, i.e., Probat DMS, MS AX, Powerplant, control systems., • Inspire and influence. You will lead, develop and coordinate continuous improvement transformation plans for plant management and supervisors, including charter development and implementation plans. You will lead cross-functional teams to resolve projects, guide data-driven decision-making, and provide technical problem-solving advice to internal clients and technology partners., • The education and experience. You may have a degree or diploma in Engineering (Industrial, Mechanical), Operations Research, or Engineering Management. You have certification in Continuous Improvement and a Six Sigma Black Belt (preferred). You have applied your theoretical knowledge over the last five years working in manufacturing or production, ideally in a cross-functional environment focused on Industrial cost control, reporting and analysis, safety, and efficiency. You have 2+ years leading continuous improvement implementation with a demonstrated ability to effectively implement Continuous Improvement Programs resulting in positive change., • The interpersonal skills. You can lead and coach cross functional teams at any level from the plant floor to senior leadership. You have the ability to influence and inspire people to execute and engage with the continuous improvement plan and projects you oversee. Your communication skills are exceptional, and you can build strong relationships with everyone you work with. You are willing to start or end work earlier or later to meet with different shifts, teams, and managers., • The logic. You have outstanding critical thinking skills. You are solution-oriented and approach problems like an engineer. You have experience with industry-standard problem-solving methodologies (LSS, DMAIC)., • The project management. You have proven success identifying CI opportunities and you have experience planning, resourcing, executing, and evaluating projects end-to-end. PMP certification would be an asset., • We want you to feel appreciated. We provide a competitive Total Rewards package, including health benefits from Day 1, employer matched retirement savings plans, and a Flexible Spending Account., • We value continuous learning, skills development, and career growth and we offer a Tuition Assistance Program for learning outside our environment., • We want you to take your work home. While you don’t have to drink coffee to work here, we have an employee discount on our tea and coffee products. By providing your information to us, you understand and agree to Mother Parkers Tea & Coffee’s Privacy Policy: While Mother Parkers welcomes all applications, we do not accept unsolicited resumes from employment agencies or search firms. Only those candidates who meet the minimum requirements will be contacted. Mother Parkers is committed to providing accommodations for persons with disabilities. Accommodation is available on request for candidates taking part in all aspects of the selection process.

Job Description Job title: Quality Engineer Schedule: Shift A,B, and C Shift Pay Type: Exempt, Salary Reports To: Engineer Manager JOB SUMMARY Are you passionate about quality and eager to make an impact in a dynamic manufacturing environment? Join our team as an Automation Engineer, where you'll play a crucial role in ensuring our products meet the highest standards. This position offers an exciting opportunity to work on the production floor, performing essential quality tests and audits while collaborating with a dedicated team. If you have a keen eye for detail, a commitment to continuous improvement, and a strong understanding of GMPs and safety protocols, we want you on our team. In return, we offer competitive benefits, including excellent medical, dental, and vision coverage. Apply now and be a part of our mission to deliver top-quality products! PRIMARY FUNCTION Under the direction of the Engineer Manager, the Automation Engineer will use technology to improve and automate the manufacturing process. Automation Engineer will also be responsible for designing and testing automated machinery and processes in order to complete exact tasks. ESSENTIAL DUTIES AND RESPONSIBILITIES • Isolate, replicate, and report defects to the software teams, • Work on custom automation solutions to support the team, • Implement improvements with measurable results in savings, revenue, or quality, • Program, configure, and integrate new equipment into an existing systems, • Provide technician direction and support to fellow team members, • Provide technical support and training to other automation resources, • Assist in the development of internal training programs, activities, and initiatives, • To include cost evaluation and return on investment (ROI) estimates, • Verify accuracy of energy monitoring, energy reports, and calibration procedures, • Responsible for the design and integration of control systems for customer applications and processes, • Complete all work each day in a safe manner, • Assist in planning, organizing, monitoring, and oversight of all phases of test automation, • Prepare reports summarizing information or trends related to automation, • Maintain correct stock levels of repair or replacement parts, • Develop and document process for internal automation and development projects, • Actively support/solve intensified issues from both internal and external customers, • Actively participate in design and code reviews from functional teams, • Actively work with the customer to optimize the automation performance to deliver contracted KPIs, • Assist in scheduling and defining resource needs for testing, • Lead the auditing of all current lab processes to identify opportunities for further automation, • Develop and execute performance test scripts specific to the product needs, • Take lead in develop resilient continuous integration and delivery automation pipelines, • Minimum of a bachelor's degree (or equivalent) in Engineering or related field., • Experience with Schematics, CAD, • Strong knowledge of Microsoft Office Applications., • Bachelor's or Graduate's Degree in engineering, computer science engineering, electrical engineering or computer science, or equivalent experience., • Experience with PLC, Agile, HMI, APIs, and SQL software and systems., • Experience with cloud, Python, SCADA, C, and JAVA software and systems., • Skilled in writing protocols and collaboration., • A natural problem solver., • Demonstrated skill with scripting and test automation. KNOWLEDGE, SKILLS, AND ABILITIES • Drives Performance: Holds self and others accountable for the achievement of performance expectations. Creates an environment that enables others to perform at their best., • Acts Decisively: Makes and acts on decisions quickly and effectively and fosters the same in others. This is based on an underlying courage to enable risk-taking for the business., • Project Management: Ability to manage, prioritize and lead numerous projects simultaneously., • Impactful Insights: Demonstrates ability to pull together insights from a variety of sources and develop strategic guidance for brand teams that result in a business decision or action, • Collaboration: Demonstrated communication and teamwork skills; ability to gain consensus and act within a matrix team environment; ability to work in a collaborative and influencing fashion that drives to business action. TYPICAL WORKING CONDITIONS • Works in an ESD manufacturing environment., • Lift/carry/push/pull up to 20lbs., • Stooping, bending, stretching, and reaching outward and over their head., • This position may require extended periods of standing, and walking., • Personal Protective Equipment (PPE) when necessary. PERFORMANCE REQUIREMENTS Adhere to all organizational information security policies and protect all sensitive information in accordance with organizational policy, Federal, State, and local regulations. The foregoing description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, efforts or working conditions associated with the job. It is intended to be an accurate reflection of the general nature of level of the job.

Job Description We are seeking a Water Resources Engineer with a focus on Hydrology & Hydraulics (H&H) to support drainage, stormwater, and civil infrastructure design projects. The ideal candidate has strong analytical skills, practical design experience, and the ability to work closely with project managers and engineers to deliver high-quality technical work. This position is NOT REMOTE. This is a hands-on technical position with a clear growth path, including support toward obtaining EIT and PE licensure. Hydrology & Stormwater Analysis • Perform hydrologic analyses including watershed delineation, runoff estimation, peak flow calculations, and time-of-concentration methodologies., • Prepare stormwater drainage studies in accordance with municipal, county, state, and federal criteria., • Assist in the development of drainage reports, detention/retention sizing, and stormwater mitigation strategies. Hydraulic Modeling, • Develop and run hydraulic models for storm drain systems, culverts, channels, swales, and open conveyance systems., • Conduct hydraulic grade line (HGL) evaluations, culvert design checks, water surface profile analysis, and flow routing., • Use HEC-RAS (1D/2D preferred) and other modeling tools for stormwater and channel evaluations. Civil Design & CAD Support, • Prepare engineering drawings and plan sets, including:, • Build and modify surfaces, pipe networks, and alignments in AutoCAD Civil 3D., • Support coordination between engineering disciplines to ensure complete and constructible designs. Technical Documentation & Coordination, • Prepare technical reports, calculation packages, and supporting exhibits., • Participate in quality control processes to ensure deliverables meet design criteria and project requirements. Bachelor’s or Master’s degree in Civil Engineering, Water Resources, Environmental Engineering, or a related field. 2–6 years of experience in water resources engineering, H&H analysis, or stormwater design. Proficiency with: • HEC-RAS, • Hydrology methods (Rational, SCS, etc.) Strong analytical, organizational, and communication skills. EIT certification or the ability to obtain it within 12 months. Benefits Health Insurance (HDHP), Vision and Dental 401K Retirement Plan Long Term/Short Term Disability Insurance Other benefits

Job Description Our Client A fast growing standards and insurance startup based in San Francisco, they have raised 15 million dollars in funding and are reinventing how enterprises adopt AI agents. Their two pronged model, which includes creating the industry’s first AI agent standard and pairing it with bespoke insurance coverage, gives AI companies a trusted pathway to certify their agents and reduces enterprise risk. By helping AI vendors earn credible certification and providing insurance protection against failures such as hallucinations, data leaks, or control breakdowns, they enable enterprise buyers to deploy AI with confidence rather than fear. With deep expertise in AI risk, insurance, and standards, they are building the essential “confidence infrastructure” that will support safe AI scale up. About Us Catalyst Labs is a leading talent agency with a specialized vertical in Applied AI, Machine Learning, and Data Science. We stand out as an agency that’s deeply embedded in our clients’ recruitment operations. We collaborate directly with Founders, CTOs, and Heads of AI in those themes who are driving the next wave of applied intelligence from model optimization to productized AI workflows. We take pride in facilitating conversations that align with your technical expertise, creative problem-solving mindset, and long-term growth trajectory in the evolving world of intelligent systems. Location: San Francisco Work type: Full Time, Compensation: above market base + bonus + equity Roles & Responsibilities * Lead end-to-end development of AI agent products and infrastructure, collaborating closely with the founding team. * Build and scale evaluation pipelines to detect AI agent failures in deployment (e.g., hallucinations, jailbreaks, brand risks, data leakage). * Design and implement the gold standard for secure, safe, and reliable AI agents. * Develop and maintain full-stack systems, including backend (Python, LangChain) and frontend (React, TypeScript) components. * Create monitoring tools, filters, and authorization frameworks to support AI agent builders. * Work on-site in San Francisco, contributing to a fast-paced, high-agency startup environment. * Ship products frequently, gather user feedback, and iterate rapidly to improve reliability and safety of AI systems. Qualifications * Bachelor’s degree in Computer Science, Engineering, or equivalent practical experience. * 1+ years of experience as an AI Software Engineer with active coding responsibilities. * Proven expertise developing AI agents and LLM-based systems (e.g., published research or work in a leading AI team). * Founding or early-stage startup experience, with demonstrated ability to own end-to-end product development. * Strong understanding of AI evaluation methodologies and deployment reliability standards. * Excellent problem-solving and communication skills with the ability to articulate technical impact in business terms. * Evidence of high agency, ownership, and execution velocity (e.g., promotions in <2 years, side projects, or rapid iteration). * Can work full-time on-site in San Francisco (5 days a week).

Job Description Suzhou Junchuang Auto Technologies, established in June 2005, is headquartered in Mudu Town, China - a historic town with a 2,500-year legacy on the shores of Taihu Lake. The company is committed to attracting top talent and fostering a culture that values family, innovation, and excellence. Our goal is to be the world-class automotive supplier, guided by our dedication to the highest standards of professionalism, technology, quality, and satisfaction. We prioritize not only our customers but also the well-being and satisfaction of our employees, ensuring a supportive and rewarding work environment. Benefits: • Full medical/health benefits, • 401k Retirement plan, • Salary: $60,000 to $65,000 per year Our work environment includes both modern office spaces and advanced manufacturing facilities specializing in plastic injection molding technology. In our contemporary office setting, you'll collaborate in a professional atmosphere featuring state-of-the-art IT infrastructure and ergonomic workstations. On the manufacturing floor, you'll find a cutting-edge plastic injection molding plant where precision and innovation come together. While we ensure top-notch quality in component production, you may occasionally notice mild odors and temperature variations typical of the manufacturing process. Safety is a top priority, with stringent protocols in place to ensure a secure workplace. Description: As an Automation Engineer at Junchuang North America, you will play a pivotal role in advancing our production processes through the design, implementation, and maintenance of automated systems. You will collaborate closely with cross-functional teams to optimize efficiency, reliability, and safety in our manufacturing operations, with a specific focus on plastic injection molding technology for EV components. Requirements/Responsibilities Job Responsibilities: -Design and Development: Conceptualize, design, and develop automated systems tailored to enhance the efficiency and productivity of plastic injection molding processes. -Programming and Integration: Program and integrate automation technologies, including robotic systems, PLCs (Programmable Logic Controllers), HMIs (Human-Machine Interfaces), and other control systems to streamline manufacturing operations. -System Optimization: Continuously analyze and optimize automated systems to improve throughput, minimize downtime, and enhance product quality. -Troubleshooting and Maintenance: Conduct routine maintenance activities and troubleshoot issues to ensure the uninterrupted operation of automated equipment. Develop preventive maintenance schedules and implement corrective actions as necessary. -Collaboration and Support: Collaborate with cross-functional teams, including production, engineering, and maintenance, to identify automation needs, address challenges, and implement solutions that align with business objectives. Communicate with automation team in headquarters to understand the design concept, specification and provide feedback loop. -Compliance and Safety: Ensure compliance with industry standards, regulations, and safety protocols in the design and operation of automated systems. Conduct risk assessments and implement appropriate safety measures to mitigate potential hazards. -Documentation and Reporting: Maintain accurate documentation of automation designs, configurations, and maintenance activities. Generate reports on system performance, efficiency improvements, and cost savings initiatives. -All other duties as assigned by Management. Requirements: -Bachelor’s degree in engineering (Automation Engineering, Electrical Engineering, Mechanical Engineering, Mechatronics Engineering or Robotics Engineering) -Proficiency in programming languages such as PLC ladder logic, C/C++, Python, or similar languages. Strong understanding of robotics, motion control systems, sensors, and actuators. Familiarity with CAD software for system design and simulation (e.g., UG, CATIA, SolidWorks, AutoCAD). -Proficient computer skills -Strong problem-solving skills. Be able to use tools, such as 5 why, fish bone, DOE, to systematically resolve machine and process issues Special Instructions Please do not send any emails, resumes, or call. We are making it really easy to apply for this position. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job Description Suzhou Junchuang Auto Technologies, established in June 2005, is headquartered in Mudu Town, China - a historic town with a 2,500-year legacy on the shores of Taihu Lake. The company is committed to attracting top talent and fostering a culture that values family, innovation, and excellence. Our goal is to be the world-class automotive supplier, guided by our dedication to the highest standards of professionalism, technology, quality, and satisfaction. We prioritize not only our customers but also the well-being and satisfaction of our employees, ensuring a supportive and rewarding work environment. Benefits: • Full medical/health benefits, • 401k Retirement plan, • Salary: $60,000 to $65,000 per year Our work environment includes both modern office spaces and advanced manufacturing facilities specializing in plastic injection molding technology. In our contemporary office setting, you'll collaborate in a professional atmosphere featuring state-of-the-art IT infrastructure and ergonomic workstations. On the manufacturing floor, you'll find a cutting-edge plastic injection molding plant where precision and innovation come together. While we ensure top-notch quality in component production, you may occasionally notice mild odors and temperature variations typical of the manufacturing process. Safety is a top priority, with stringent protocols in place to ensure a secure workplace. Description: As an Automation Engineer at Junchuang North America, you will play a pivotal role in advancing our production processes through the design, implementation, and maintenance of automated systems. You will collaborate closely with cross-functional teams to optimize efficiency, reliability, and safety in our manufacturing operations, with a specific focus on plastic injection molding technology for EV components. Requirements/Responsibilities Job Responsibilities: -Design and Development: Conceptualize, design, and develop automated systems tailored to enhance the efficiency and productivity of plastic injection molding processes. -Programming and Integration: Program and integrate automation technologies, including robotic systems, PLCs (Programmable Logic Controllers), HMIs (Human-Machine Interfaces), and other control systems to streamline manufacturing operations. -System Optimization: Continuously analyze and optimize automated systems to improve throughput, minimize downtime, and enhance product quality. -Troubleshooting and Maintenance: Conduct routine maintenance activities and troubleshoot issues to ensure the uninterrupted operation of automated equipment. Develop preventive maintenance schedules and implement corrective actions as necessary. -Collaboration and Support: Collaborate with cross-functional teams, including production, engineering, and maintenance, to identify automation needs, address challenges, and implement solutions that align with business objectives. Communicate with automation team in headquarters to understand the design concept, specification and provide feedback loop. -Compliance and Safety: Ensure compliance with industry standards, regulations, and safety protocols in the design and operation of automated systems. Conduct risk assessments and implement appropriate safety measures to mitigate potential hazards. -Documentation and Reporting: Maintain accurate documentation of automation designs, configurations, and maintenance activities. Generate reports on system performance, efficiency improvements, and cost savings initiatives. -All other duties as assigned by Management. Requirements: -Bachelor’s degree in engineering (Automation Engineering, Electrical Engineering, Mechanical Engineering, Mechatronics Engineering or Robotics Engineering) -Proficiency in programming languages such as PLC ladder logic, C/C++, Python, or similar languages. Strong understanding of robotics, motion control systems, sensors, and actuators. Familiarity with CAD software for system design and simulation (e.g., UG, CATIA, SolidWorks, AutoCAD). -Proficient computer skills -Strong problem-solving skills. Be able to use tools, such as 5 why, fish bone, DOE, to systematically resolve machine and process issues Special Instructions Please do not send any emails, resumes, or call. We are making it really easy to apply for this position. Simply submit a ZippyApp application package which may include the Common Employment Application, Resume, and a Cover Letter. In your Cover Letter, please write a short paragraph describing yourself and why you would make a great addition to our team. ZippyApp is the Common Employment Application for online and mobile that allows you to apply for jobs with one click, and is being accepted at a growing number of businesses each day.

Job DescriptionAt Baird, Hampton & Brown, our mission is building partners through creative, sustainable engineering solutions, and honest, long-term relationships. With over 30 years in the business, we understand that a solid foundation is necessary in every aspect of what we do. We support our team members in pursuing excellence in their fields and balancing their lives. We serve our clients with integrity, communication, and involvement at every stage. As a team member, you can trust BHB to champion our core values, which leads to healthy, mutually beneficial relationships as well as services of the highest caliber. We are currently seeking a full-time, licensed, Electrical Engineer, PE to design power, lighting, and signal systems for commercial projects including schools, retail, industrial, municipal, commercial, critical care environments, healthcare, and more. As a mid-level position, you will oversee small to mid-sized lighting and power projects with a team of fellow licensed engineers, Graduate Electrical Engineers, and Electrical EITs. You will perform photometric analyses of lighting systems, use power analysis software to calculate voltage drop, short circuit currents and arc flash boundaries. Depending upon your experience, you may also be responsible for project management tasks such as creating and tracking budgets, overseeing the scheduling of projects, and reviewing construction documents. In this role you can expect to perform the following tasks. This is not an exhaustive list: • Design electrical distribution systems starting from the utility source to the customer panelboards then to receptacles and equipment loads., • Perform site visits to document and assess existing electrical systems., • Select lighting fixtures and lighting control systems to comply with energy codes., • Prepare technical drawings, specifications of electrical systems, to ensure that installation and operation conform to building codes, industry standards and customer requirements., • Create construction documents using AutoCAD and REVIT software., • Perform photometric lighting studies using AGi23 software., • Perform voltage drop, short circuit, and arc flash calculations along with load flow analyses using SKM Power Tools for Windows software., • Coordinate and attend meetings with clients, consultants, building officials, utility company representatives, owners, and internal staff members on projects., • Develop construction budgets, estimating labor, material, and construction costs., • Oversee project production efforts to ensure projects are completed on time and within budget., • Visit project sites to review progress and gauge conformance to construction documents., • Four-year minimum degree in Electrical Engineering from an ABET-accredited program, • At least three years of recent experience as an Electrical PE in electrical building design, • Excellent interpersonal & communication skills - Connections are a critical part of how we work., • Working knowledge of the National Electrical Code and International Building Codes., • Knowledge or experience in the preparation of construction drawings and specifications. Position Type and Schedule This is a full-time, exempt position, with an expectation to work 40 hours per week. BHB offers flexible scheduling options, including five 8-hour days or four 9-hour days with a half day on Friday morning. While the start and end times of the workday can be adjusted, employees are expected to establish and maintain a consistent schedule which must encompass the core business hours of 9am – 4pm. Although overtime is not required, it is requested at times to meet our clients’ needs. Benefits We believe that taking care of our employees and their families is vital to our success. For several years, BHB has been awarded the titles of "Best Place for Working Parents" and Zweig’s "Best Firms to Work For." BHB sponsors employee medical, dental, vision, short-term & long-term disability, and basic life insurance, as well as subsidizing a significant family portion. BHB also offers voluntary life and disability insurances, paid parental leave after 12 months of employment, a PTO bank immediately available, & 401(k) matching. We believe in lifelong learning: providing many internal & external training opportunities including formal & informal mentorship programs. We sponsor multiple professional & industry memberships, licensure, and leadership opportunities. More details regarding benefits will be provided during the interview process. Equal Employment Opportunity Baird, Hampton & Brown is an Equal Opportunity Employer. All employment decisions are based on qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, age, sex (including pregnancy & childbirth conditions), sexual orientation, gender, gender identity, expression, or status, mental or physical disability, genetic information, military or veteran status, citizenship, or any other status or characteristic protected by applicable law. Powered by JazzHR 24nw0cSbx2

Job Description We are looking for a Production Engineer who will play an integral part in expanding and enhancing our Production Facility. In this position, you will work alongside the entire production team to produce daily live shows, virtual live events, pre-produced content, and more. This role requires a strong multi-tasker with good attention to detail and superb communication skills. They must also have a strong desire to continuously improve their skill set and all the necessary technical skills as well as a willingness to adapt to the needs of the live show. Position Requirements • Working knowledge of general electronic theory., • Computer literacy and systems familiarity., • Install, maintain and repair broadcast production equipment, • Apply preventative maintenance on a regular basis for production technical equipment, • Analyze existing workflows, identify processes that can be streamlined or improved upon with new hardware, software, or automation, • Work with IT staff to implement new computer systems and to facilitate new software bundles, • Train staff on new technologies, • Proactively troubleshoot the technical broadcast operations and needs and act as lead to ensure all software, hardware and other production equipment and support is up to date, • Minimizes service interruptions at times of equipment and/or system failure by rapidly identifying and implementing solutions, • Work with supervisor to build out quotes for needed equipment and studio upgrades & maintain relationships with vendors, • Ensuring studio space remains safe, • Associate’s Degree in Digital or Broadcast/TV production, or equivalent work experience., • Experience with broadcast engineering capacity, including set up live TV broadcast, news, or live in-arena events and production., • Familiar with computer networking infrastructure and PC operating systems, • Familiar with IP based transmission and streaming protocols, • Problem solver with a degree of independence, • Self-starter with the ability to prioritize in a fast-paced environment and meet changing deadlines & directions on multiple projects, • Strong time management skills and attention to detail, • Positive attitude and desire to work in a team environment, • Excellent communication skills, • Lifting, pulling, or pushing items over 40 lbs., • Ability to climb stairs and ladders, • Ability to sit and/or stand for extended periods of time, • Valid Driver’s License, • Responsible to fulfill all duties required of a key department member., • Responsible for providing personal support in whatever capacity is required to assist management to help meet the needs of the production facility and the company as a whole., • Responsible for maintaining 24‑hour "on‑call" liaison with company personnel, and available during those times to render emergency assistance. Otherwise, responsible for designating a competent alternate person as a back‑up during illness, vacation and other approved absences., • Reports directly to the Network Senior Vice President of Engineering and has accountability to the Senior Network Engineer., • Cooperates with and is evaluated by management in the area of performance of technical skills, good engineering practice and compliance with corporate and FCC technical policies as well as general employee performance and conduct as a staff member.

Job Description Engineering data centers with precision and expertise. At Strategic Mission Critical, we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the anticipated increase in demand driven by AI advancements, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of a team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. SMC is actively looking for a Senior Mechanical Engineer to direct and execute mechanical design for mission critical projects. Typical project types may include design of greenfield and brownfield data center facilities, design of fit-out packages for hyperscale and enterprise clients of colocation providers, data center campus planning, conceptual designs and feasibility studies, and various system calculations. This candidate shall be capable of executing mechanical design projects independently, beginning with driving concept level discussions and proceeding through generation of design plans and specifications for permitting and construction. The mechanical design scope will be a part of a broader project and therefore this candidate will be highly capable of interfacing with design leads within SMC (electrical, telecommunications, fire protection, plumbing) as well as externally including architectural, civil, structural, etc. The ideal candidate will additionally be involved in growing the mechanical expertise within the company, through internal training; development and implementation of design standards; oversight and execution of quality control practices. RESPONSIBILITIES This candidate will have the opportunity to direct and execute the mechanical design while working and coordinating with clients and design leads from all disciplines. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. Responsibilities include but are not limited to: • Utilize Autodesk Revit to produce detailed design documents., • Perform and review airside and hydronic calculations for multiple mechanical systems., • Produce and understand hydronic & airflow flow diagrams., • Select and specify HVAC equipment., • Understand and be capable of creating detailed sequences of operations (SOO) for the mechanical systems they design., • Understand and be capable of specifying mechanical controls systems., • Meet project deadlines, including working necessary hours to complete major deliverables., • Understand local and national construction codes and project specifications, • Have experience with the use of Microsoft tools such as Word, Power Point, Excel, and Teams., • Have the ability to travel when required to project sites (approximately 10-20% travel)., • Have the ability to clearly communicate with others in both written and spoken forms., • Lead other engineers, designers, and modelers, and coordinate the tasks of multiple teams to execute project delivery of several projects simultaneously., • Mentor and train other engineers, designers and modelers to develop mechanical design knowledge base., • Be able to work independently while coordinating with senior personnel and other disciplines., • Maintain a strong working knowledge of electrical systems in the context of coordinating mechanical design requirements., • Maintain excellent organizational skills, with the ability to manage multiple tasks simultaneously QUALIFICATIONS • 4-year degree in mechanical engineering or architectural engineering with a mechanical focus. 2-year degrees and MET degrees with work experience will be considered., • Minimum 8 years of experience in HVAC design, particularly using Autodesk Revit., • Experience in electrical design for larger industrial and commercial buildings is preferred, with experience in mission critical design a strong plus., • Experience developing detailed mechanical calculations and use of calculation software is required., • Experience working across the entire construction process, from schematic design through construction administration, including review of submittals and shop drawings, and field work such as existing condition surveys, site observations, and punch lists., • Experience leading mechanical design teams and interfacing with clients is strongly preferred., • Strong knowledge of controls and monitoring systems for mechanical and electrical systems is a plus., • Experience using construction management tools such as Procore and Autodesk Construction Cloud. This position will begin as remote, with plans to transition to a hybrid role as we continue to grow. We anticipate establishing offices in both the Austin and Dallas–Fort Worth metro areas in the near future, at which point it will become a hybrid role. COMPENSATION Base Compensation: $125,000-$350,000 (Actual compensation is subject to variation due to factors such as education, experience, skills and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job Description TNP has an immediate opening for a Project Manager to join its Stormwater Group, an established water resources team in our Fort Worth, Texas office. Project Managers are responsible for project planning, scheduling, and execution. They are also responsible for overseeing staff charged with the development and delivery of drainage analyses, studies, and designs for TNP’s municipal clients, as well as providing stormwater design & management support services to other TNP departments such as transportation, land development, site development and municipal service teams. The Project Manager position provides an excellent opportunity for personal & professional growth and participation in our 1-on-1 mentoring program, as well as the opportunity to have a leadership role in the growth and development of the team Responsibilities: • Establishing strong client relationships and communication, • Managing the technical design of a variety of public projects from the feasibility stage to final design and through construction administration, • Organizing and directing the efforts of a project team, including engineers, technicians and sub-consultants, • Preparing proposals, reports, opinions of cost and construction documents, • Maintaining strong overall financial performance, • Strong personal organization and time management skills., • Continuous learner., • Good listening and comprehension skills., • Excellent oral and written communication skills., • Creative problem solver., • Strong decision-maker., • Interacts positively, effectively and collaboratively with people in all levels of organizations., • Effective leader and mentor., • Strong sense of Urgency with a “Get it done” / “Can do” attitude. Requirements Education/Certification • B.S. in Civil Engineering, • Current registration as a Professional Engineer (Civil) in the State of Texas, or the ability to obtain State of Texas P.E. certification within one (1) year., • Responsive and results oriented in service to clients and the design team., • Six to Eight (6-8) years of experience as a Civil Engineer., • Strong commitment to professional development., • Demonstrated leadership and ability to effectively train & mentor a qualified & productive team., • Demonstrated ability to develop & maintain solid collaborative working relationships with team members & clients., • Demonstrated ability to effectively plan, organize and schedule work to meet deadlines., • Demonstrated ability to manage & meet client expectations., • Demonstrated ability to lead the analysis and design of stormwater project, including preparation of drainage studies and PS&E documents., • Demonstrated understanding of water quality and environmental permitting requirements., • Proficiency with AutoCAD Civil 3D preferred., • Proficiency with ESRI ArcMap preferred., • Proficiency with HEC-HMS, HEC-RAS (Steady and Unsteady) preferred., • A competitive base salary, dependent on skills, qualifications, and experience, • Supplemental pay for additional hours worked in excess of 43 hours, • Generous performance-based bonus opportunities, • Medical, dental, and vision insurance, all beginning on the first day of employment, • Life and disability insurance, • A 401(k) plan with a partial company match, • A Health Savings Account, • Paid time off, • Gym Reimbursement, • An extensive learning and development program, • Tuition reimbursement, • Financial Advising

Job DescriptionDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): • New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firm, • Development Opportunities // Professional and personal growth through innovative in-house training and collaborative resources, • Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs, • Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions cases, • Winter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Proficient // Solid understanding and substantial experience; works independently and efficiently. 4+ years of professional experience, PE may be required. • Knowledge of standard engineering and scientific techniques, procedures, and criteria in carrying out tasks. Familiarity with CobbFendley’s QA/QC Management System., • Skills including use of industry-standard computer software for the position (i.e., software such as CADD, HCS, AutoCAD, MicroStation, GIS, and Hydrologic/Hydraulic models). 1. Design + Analysis // • Complete entire design and analysis for a simple project, ensure latest manual and criteria are being met, sign and seal plans., • Work with project team to ensure tasks design and analysis tasks are coordinated. 2. Compliance + Quality // • Adhere to Company QA/QC processes and procedures and review work by others. Understand general contract language and risk assessments and mitigation. 3. Communication + Collaboration // • Work with supervisor, project manager, task leads, and various internal personnel to complete assignments within discipline and other disciplines., • Lead meetings and follow up documentation. 4. Training, Learning + Advancement // • Attend internal or external training., • Assist with onboarding and training various types of staff. 5. Client + Internal Satisfaction // • Work with clients daily, problem solve issues and escalate concerns when needed., • Set and adhere to project schedule, attend client meetings, assist with marketing and project interviews, general understanding of financial management to ensure profitability. 6. Technical // • List Project Engineer to assist the Project Manager in all aspects of various utility-based projects., • Prepares utility relocation schedule and tracks project deliverables. Request for as-builts from utility owners., • Set up and maintain electronic files for received utility records., • Assist in interpreting various Subsurface Utility Engineering quality level data in order to analyze utility conflicts and develop concept plan., • Assist in preparing cost estimates., • Assist in setting up and maintaining project electronic files., • Assist in developing/maintaining project schedules., • Assist in maintaining client exhibits (KMZ & GIS) which define project scope of work., • Assist in coordinating field investigation requests., • Assist in reviewing design drawings (QA/QC)., • Assist in reviewing permit drawings (QA/QC)., • Assist in reviewing GIS geodatabase deliverables (QA/QC)., • Assist in updating internal and client project trackers., • Assist in keeping abreast of design changes from clients., • Assist in responding to design questions from CAD Technicians., • Assist in responding to requests from clients., • Assist in the preparation of contracts, fee proposals, scopes of work, and invoices., • Prepare utility progress reports. Prepare utility relocation schedule and tracks project deliverables., • Prepare utility adjustment agreements., • Organize and attend utility owner meetings., • Learn and maintain knowledge of client standards, rules, and requirements for planning, construction, and documentation., • Perform independent research and adapt to changing priorities., • Work with minimal supervision and deliver accurate work product., • Adhere to CobbFendley’s safety standards to uphold a safe and efficient environment., • We Collaborate // with a professional attitude making communication a priority., • We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required. • Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation., • Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces., • Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens., • Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard., • Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally., • Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder., • Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality., • Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices., • Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants., • Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools., • This is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. • EEO is the Law (English), • EEO is the Law (Spanish), • Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures., • External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed., • Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind. Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Professional Engineer to join our Community Design Team to improve infrastructure in our Fort Worth office. The candidate must be a licensed PE with a bachelor's degree in civil or environmental engineering and have at least eight years of related design experience. The candidate must also be self-motivated, work well with others, and have excellent writing, organizational, and communication skills. A flexible hybrid-remote work schedule is available after 30 days of employment. Typical responsibilities include: • Design civil projects that may include water mains, sanitary sewers, storm sewers, roads, bridges, utility/miscellaneous infrastructure improvement designs, etc., • Develop and complete applications, permits, engineering reports and specifications, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget and schedule for project tasks, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • Bachelor's Degree in Civil Engineering, • Professional Engineer License

Job DescriptionPosition Description:As a Reliability Field Engineer, you are an integral part of our Operational Readiness team. You will coordinate, prepare, review and research equipment and material databases that allow out teams to recommend the best maintenance and asset management practices for our clients. If you enjoy hands-on experience while building your foundation of maintenance and reliability skillsets, this position is for you. Requirements include:Essential Duties and Responsibilities:Perform field walk-downs of systems and processes to collect or validate baseline equipment specification dataRefine and load equipment information and engineering specifications into a database to achieve standardized recordsCollaborate with equipment manufacturers and vendors to develop unique parts listsReview maintenance data, engineering drawings, technical manuals, and other documentation to communicate associated reliability findings and recommendationsDraft Failure Mode and Effect Analysis sheets (FMEA) on systems and equipmentPerform all necessary quality control functions that are required to ensure that complete, accurate, and relevant data is provided to the customer Position Requirements: BS in an Engineering or Science field or equivalent experience2+ years’ experience in process engineering, maintenance, and reliability or operational excellence, lean six sigma and TPMAbility to read Piping and Instrumentation Diagrams (P&ID)Ability to identify industrial equipment and record data in spreadsheetsAbility to perform work with frequent interruptions and distractions.Ability to accomplish tasks by focusing on all areas involved; ensuring all associated processes and tasks are completed and accurate.Ability to effectively operate computer tablet and PC technology and software.Ability to interact and collaborate with others, both in person and through phone, e-mail, and written correspondence. Other Requirements:Excellent oral and written English is requiredAble to travel domestically and internationally if requiredAble to work (paid) overtimeAble to work in the US without sponsorship now or any time or in the future About CAICAI is a 100% employee-owned company established in 1996 that has grown to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and other consulting services associated with operational readiness to FDA regulated and other mission-critical industries. Are You Ready?Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there.As owners of CAI, we are committed to living our Foundational Principles, both professionally and personally:We act with integrity.We serve each other.We serve society.We work for our future. With employee ownership, one person’s success is everyone’s success; we work diligently to accomplish team goals. We place Team Before Self, demonstrate Respect for Others, and possess a Can-Do Attitude (our core values). That is how we have grown exponentially. BenefitsOur full-time positions offer competitive compensation and benefits which include: up to 15% retirement contribution, 24 days PTO and 5 sick days per year, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company.#LI-MV1Average base salary range - not including benefits, and potential overtime and/or Cost of Living Adjustment. CAI Benefits:•Comprehensive Health Insurance coverage•24 days of Paid Time Off•ESOP/401K - 15% Company Contribution (US Only)•Company paid Life Insurance•Company paid Long Term DisabilityWe are an equal opportunity employer; we are proud to employ veterans and promote diversity and inclusion in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Chance Act (FCA) / Fair Chance Ordinance (FCO). We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Process Engineer – Powder will be an integral part of the team designing and building a new metal, alloy, and magnet-making facility. This is a rare opportunity to have a central role in the development of a greenfield advanced manufacturing facility and helping to define the future of American manufacturing. The ideal candidate will have hands- on experience in controlling metal powder production processes such as powder conveyance, hydrogen decrepitation, jet milling, classification, blending, quality control and other related powder processing techniques. The Process Engineer must be comfortable with equipment fault diagnosis, process development, PLCs, and P&ID. This position reports into a Senior Engineering Manager. The new facility will contain a broad range of chemical, mechanical, and thermal processes, including electrowinning, strip casting, powder production, pressing & sintering, machining, and assembly. Because of the broad range of processes in use, it is important that the Process Engineer be able to engage with a broad range of technical specialists and gain a working understanding of the physical processes, key control metrics, and potential hazards involved. The key aspect of this role is to provide technical coordination and support to the powder processing operation to meet customer requirements. Position Responsibilities: • Member of the Production Engineering team. Work with production team members of upstream and downstream processes to execute the products for customers., • Work with procurement, vendors, maintenance, operators, and other team members on equipment specification, design reviews, and commissioning of new plant., • Contribute to EHS risk assessments, HAZOP studies, and regulatory compliance., • Plan, execute, and assist with process, and procedure development for hydrogen decrepitation (HD) furnace, Jet milling, dry grinding and powder blending., • Work closely with the NPI team in new process development and deployment in industrial scale., • Provide technical training and support to the production team and technicians on process knowledge., • Evaluate customer requirements and work in partnership with broader manufacturing and engineering teams to define process control plans to meet customer specifications., • Monitors and directs changes to key operating parameters under area of responsibility driving to achieve high yield, consistent product quality, and minimal EHS impacts., • Supervise the daily use of quality control procedures, driving initiatives to ensure stable and efficient powder processing operations., • Investigate and resolve equipment and quality issues within HD furnace, Jet Milling and subprocesses, working with QA, production, and customer service to address any product quality or customer complaints., • Document and disclose intellectual property and assist in patent filing preparation and defense., • BS degree in Metallurgy/Materials Science, Mechanical, Chemical Engineering, Chemistry, or related field., • 3-5 years’ experience in metal powder processing with industrial scale processes and equipment., • Deep understanding of powder metallurgy processes for part manufacturing and powder quality control fundamentals such as particle size distribution (PSD), particle flowability, particle agglomeration, and more., • Knowledge and experience in gathering and tracking process control information for SPC., • Problem solving experience (FMEA, 8D, A3, Root Cause Analysis etc.)., • Excellent written and verbal communication skills., • Experienced user of Microsoft Office suite., • 5+ years of experience of industrial experience powder manufacturing, processing, and/or conducting powder metallurgy processes., • Deep technical knowledge of metal powder pulverization and hydrogen furnace operation., • Practical experience of the process safety associated with metal powder processing., • Experience with SAP., • Ability to identify and solve problems and convince others (management down to operators) that your solution is the right one. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description As a BMS/Control Systems Design Engineer you will be joining a fun, growing, team of other Electrical and Control System Engineers, Control System Integration Engineers, and Technicians. Your primary role will be designing instrumentation and control systems for Data Centers. Projects range from high level conceptual designs, detailed site designs and retrofits, factory witness testing of equipment, and construction administration and verification. This role will communicate and coordinate with other engineering disciplines, teams, subconsultants, clients, vendors, and contractors to learn, implement, and verify Data Center Building Management Systems are designed and constructed properly. You will be responsible for managing your tasks including the Building Management System (BMS) design, specifications, and drawings. This position may require occasional travel to project sites for meetings, information collection, and construction administration. Additional duties will include: • Selection and specification of process instrumentation., • Selection and specification of Programmable Logic Controllers (PLCs) and Human Machine Interface (HMI) equipment., • Selection and specification of networking components and media including copper, fiber, and wireless hardware., • Development of control system (BMS) sequences of operations., • Submittal review and field inspections., • Working collaboratively with others, • Having ownership in the work you do, • Strong communication skills., • Ability to contribute and work well on a team., • 6+ years of experience., • Attention to and passion for detail., • Professional engineering license preferred., • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related field preferred. #LI-DNI Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Mission Speechify is the easiest way to listen to the world's information. Articles on the web, documents in the cloud, books on your phone. We absorb it all and let you listen to it at your desk, on the go, at your own speed, and with tools that make learning easier, deeper, and faster. What streaming services have done for audio entertainment, we're doing for audio information. And whatever we're doing seems to be working. We're #1 in our category, and experiencing exponential growth. Overview We're looking for a Senior Software Engineer to join our Core Experiences Team. This team builds and maintains the foundational services and SDKs that power Speechify's product experience across platforms. It's a critical role for someone who enjoys working at the intersection of product and infrastructure, thinks strategically, and is passionate about designing clear, reliable APIs and simple systems that directly enhance the user experience. What You'll Do • Collaborate with Speechify's Product Teams to scope projects, find ways to reduce scope to get faster feedback from customers, navigate the integration/UX tradeoffs relevant to different product teams, and deliver solutions via our cross-platform SDK, • Optimize existing functionality to ship things like faster loading and more intelligent parsing by designing more efficient abstractions and improving our algorithms, • Systems thinking. You know that optimizing a system requires end-to-end design, and you believe simplicity is valuable., • Speed. You work quickly to generate ideas and options and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs, • Preferred Tech Stack:, • Kotlin Multiplatform (Java experience is OK but role is Kotlin Multiplatform), • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Opportunity to lead key engineering and product decisions, • Actively shipping production code for the Speechify iOS app, • Work within a dedicated product team, • Participate in product discussions to shape the product roadmap, • Experience. You've worked on products that scaled to a large user base, • Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product, • Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience, • Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction, • Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Swift Programming Language, • SwiftUI experience, • Experience in Multithreading Programming, • Working with CI/CD infrastructure, • Experience with Fastlane, • SOLID principles, the ability to write every single class according to SOLID, • A fast-growing environment where you can help shape the company and product, • An entrepreneurial crew that supports risk, intuition, and hustle, • The opportunity to make a big impact in a transformative industry, • A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture, • Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives, • Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description PRIMORIS POWER DELIVERY With over 70 years of operating experience, Primoris Power Delivery services include engineering and design, installation and maintenance, material and equipment procurement, repair of electrical transmission, distribution, substation, wireless communication, and storm restoration. Our experience ranges from small engineering and consulting projects to multi-million dollar turn-key distribution, substation, and transmission line programs. The Total Rewards Proposition: • Competitive compensation paid weekly., • Best-in-class; Medical, Dental, Vision, and LTD/STD., • 401(k) with company match, vested day-one., • Employee Stock Purchase Plan [ESPP]., • Tuition Reimbursement., • Paid Time Off, Holiday Pay, and Community Service Paid Time Off., • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage, • Award winning safety programs., • Overtime opportunities., • Growth Opportunities. Primoris Power Solutions has an immediate opening for a motivated Substation Engineer to join our growing Substation team in Fort Worth, Texas. As part of this team of highly specialized design professionals, you will support a variety of substation, transmission and distribution projects ranging from 12kV to 500kV in both engineering detailed design and Engineer, Procure, Construct (EPC) projects for clients throughout the country. • Performs intermediate calculations under the supervision of a more senior engineer. Solves problems using well established scientific principles., • Has good understanding of the NEC and how to apply it to design on electrical systems., • Develops electrical data sheets for electrical equipment., • Develops low voltage and medium voltage wiring schematics with supervision., • Able to analyze data and understands the relationships and correlations., • Ability to draw conclusions and present finding to senior leadership., • Proactive about learning new information and skills., • Initiates development of personal objectives aligned with those of the organization., • Seeks feedback and uses it effectively., • Has good understanding of the complete design and has good input into ways of improving the design., • Utilize codes and standards to complete assignments., • Identifies the customer’s both internally and externally., • Handles various assignments, including rework, in timely manner to meet schedule deadlines., • Performs assigned work efficiently and effectively to maximize person productivity., • Performs quality checks of the design in a team environment to ensure accuracy., • Carries out assignments carefully while focused on details. Educational & Minimum Requirements:, • Bachelor’s degree in Electrical Engineering minimum required., • 2-4 years' minimum relevant experience in the power industry., • Receives limited instruction on routine work and detailed instruction on new assignment from more experienced engineer., • Adjusts to varying demands of work and performs well., • Communicates effectively orally and in writing. Present ideas clearly and in professional manner., • Participates on teams effectively. Accepts direction from the team. Individually contributes to success of the team., • Supports project teams and departments in a positive and productive manner. Works well with other to accomplish common goals and objectives., • Serves as point of contact for external or internal customers., • Follows through on commitments made to internal and external customers., • Able to manage multiple responsibilities with set expectations and meet deadlines. EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.

Job Description100% REMOTE Senior Ruby on Rails Engineer / Senior Full Stack Developer Needed for Growing Fintech Company! This Jobot Job is hosted by: Reed Kellick Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $150,000 - $185,000 per year A bit about us: We are a growing fintech company that is on the lookout for a 100% remote Senior Full Stack Engineer / Senior Full-Stack Developer! Why join us? As a Senior Fullstack Engineer / Senior Fullstack Developer in our company, we are able to offer: • A competitive base salary between $150k and $185k, depending on experience!, • 8% annual bonus!, • Attractive equity!, • Flexible time off policy!, • 100% premium coverage for employees!, • Employer HSA contributions! Job Details As a Senior Software Engineer / Senior Software Developer on our team, we are looking for: • Proven Ruby on Rails background, • Strong React / Reactjs / React.js experience, • Multiple years of professional experience as a Full-Stack Engineer, • Willingness to do a Ruby exercise and a React exercise upfront as the first step of the hiring process, • Current residence in AZ, CO, IL, MD, TX, VA, DC, CA, FL, MA, MN, NY, OR, WA, or WI Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Another Opportunity in North Texas! We're on a roll and growing fast! This time, we're looking for a Controls Systems Engineer to join our team! This hybrid position offers the perfect blend of in-office collaboration and on-site client engagement. If you're ready to TAKE CONTROL and be part of something exciting, we want to hear from you! We are RED Group. And We're Thinking Ahead. RED Group is an Industrial Control Systems (ICS) technology development and integration firm specializing in Process Automation, IT/OT Consulting, and Industrial Cybersecurity. We stand out in experience and expertise. We are committed to an employee-centric culture of success where we put our people first and give our staff the opportunities and push that they need to succeed and improve. As a result, they give their utmost to help our clients and get better at what they do each day. Our mission is to add value to our clients' organizations by selecting and deploying the proper resources and technology to ensure their goals are realized. Our team of Engineers, Consultants, Programmers, and Technicians provide the valuable expertise necessary for efficient and secure ICS/OT environments. About the Role The Control Systems Engineer is responsible for the implementation of control systems and DCS/PLC/SCADA programming. This includes a working knowledge of Electrical, Instrumentation, and Industrial Control Systems/IT - specializing in design, development, programming, integration, troubleshooting, commissioning, start-up and control system optimization. Key Responsibilities Experience in more than one of the following areas is preferred, but not required: • Program and configure PLC, HMI, DCS and SCADA systems., • Program and configure industrial robotics (Material Handling, Integrated Vision Systems), • Design, configuration, integration, and implementation of automated equipment., • Develop software/hardware design specifications., • Design, write, test and document PLC/HMI software., • Create Control Narratives, Logic Diagrams, Cause & Effect Diagrams, and Network Diagrams., • Develop and execute control system validation/testing protocols., • Troubleshoot, test, and start-up control systems onsite., • Participate in site visits and meetings as required by project., • Consult with clients to ensure project success., • Interact with project managers/team leads, clients, and other third parties. Qualifications & Skills • Bachelor's degree in engineering, computer programming, or related field or commensurate experience. Automation System training, certification, or field-experience a plus., • 4+ years of control systems design and programming experience, focusing on PLC, HMI, SCADA, and Industrial Robotics preferred., • Modicon PLC programming languages: Control Expert, Unity, Concept., • Rockwell Automation Software: Logix Designer, Studio5000, RSLogix5000, RSLogix500., • Other PLC Programming Environments Include: Codesys, Siemens, PLCNext, Beckhoff, • OIT/HMI software development: Wonderware, Intellution, FactoryTalk ME/SE, VTScada, Ignition., • Experience with Ignition Software highly desired. Inductive Automation Ignition Core Certification Preferred; Gold Certification a Plus., • Experience with industrial robotics (Fanuc, Universal Robots, and similar), • Experience with industrial vision systems (Keyence, Cognex, and similar), • Experience with common control system documents (P&IDs, I/O Lists, C&E Matrices, etc.)., • Experience with control systems instrumentation and end elements basic operation and electrical interfaces, • Experience with start-up and commissioning of automation systems., • Experience with control system networking technologies (including industrial communications protocols) and PC networking technologies., • Experience with motor control systems and variable frequency drives (VFD)., • Must be able to travel to customer sites in the surrounding area as needed to support project and client requirements., • Ability to partner with clients, vendors, and other team members to deliver projects., • Ability to manage multiple projects and priorities., • Strong interpersonal, verbal, and written communication skills., • Embrace our core values while enjoying a collaborative and engaging atmosphere:, • Be Dependable, • Cultivate Relationships, • Strive for Excellence, • Foster and promote a strong safety culture and follow company safety protocols. Why RED Group? Culture. Growth. Opportunity. At RED Group, we believe that a thriving workplace starts with a strong, employee-centric culture. Our focus on our people ensures they have the resources, support and opportunities needed to excel. Our commitment to success drives outstanding results in our client engagements, with our team always striving for excellence. If you join RED Group, you'll enjoy: • A collaborative team environment that values your contribution., • Competitive benefits, flexible schedules, and hybrid remote work options., • The stability of a well-established company poised for exciting growth.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The ideal candidate will have experience in industrial automation, SCADA systems, data acquisition platforms, and secure industrial networking. As an OT Engineer, you will help design, deploy, and maintain the facility’s digital backbone for collecting and distributing real-time and historical data from all automated systems. You will also collaborate closely with IT, controls, and production teams to enable seamless, secure integration across platforms. Position Responsibilities: • Design, configure, and maintain SCADA/HMI systems, including FactoryTalk View SE/ME, Siemens WinCC, or similar platforms., • Support the configuration and ongoing deployment of AVEVA PI (OSIsoft PI) for data collection, asset historian, alarming, and reporting., • Implement and maintain Rockwell AssetCentre or similar systems for version control, device management, and audit tracking., • Integrate field devices, PLCs, HMIs, and sensors into the OT network, ensuring standardized communication and robust data flow., • Develop and maintain secure, segmented industrial network architectures, including VLANs, Layer 2/3 switches, firewalls, and routing strategies., • Support real-time and historical data aggregation from multiple sources—PLCs, SCADA, sensors, databases—into centralized historian platforms., • Configure and support industrial communication protocols such as Ethernet/IP, Profinet, Modbus TCP, OPC UA/DA, and MQTT., • Collaborate with IT and cybersecurity teams to establish OT/IT boundary controls, security protocols, and compliance standards., • Participate in system commissioning, including Factory Acceptance Tests (FATs), Site Acceptance Tests (SATs), installation, and startup activities., • Provide troubleshooting support for SCADA systems, data historians, and network infrastructure during operational events., • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechatronics, or a related technical field., • 3+ years of hands-on experience with Operational Technology systems in a manufacturing or process environment., • Proficiency with SCADA/HMI platforms such as FactoryTalk View, WinCC, or similar., • Experience with PLC programming and integration (Rockwell, Siemens preferred)., • Familiarity with AVEVA PI (OSIsoft PI) or similar data historian platforms., • Hands-on experience with industrial networking, including VLANs, managed switches, and firewall configurations., • Working knowledge of industrial protocols: OPC UA/DA, MQTT, Ethernet/IP, Modbus, Profibus., • Experience integrating OT platforms with cloud services, edge devices, or IoT infrastructure., • Familiarity with virtualization environments such as VMware, Hyper-V, or Nutanix., • Exposure to MES or ERP systems and experience with data flows between systems., • Ability to analyze structured datasets and develop dashboards or visualizations for operations and performance tracking., • • Strong problem-solving skills and ability to communicate solutions clearly to cross-functional teams (from operators to senior management)., • Solid documentation and organizational skills for maintaining system records and change logs. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionSalary: Are you an Experienced IT Professional looking for a new challenge? Ready to work in a fast-paced environment with some of the IT Support Industrys latest technology? Want to be part a professional team in an established, high-growth company? Were one of the areas top Managed Technology Services Firms and were looking for our next Systems Engineer. We are seeking an experienced and motivated IT professional to lead exciting projects using todays latest systems and technologies to serve our professional clients As Systems Engineer youll need to identify user problems promptly, develop solutions and communicate those solutions both internally and to the clients while always maintaining our high level of customer satisfaction. Youll work on more complex or emergency service tickets and projects so you will be in one of the primary positions for our team. You must be a self-starter, a leader as well as a great problem solver. • This is an on-site position * The Systems Engineer Position: • Work will be done remotely supporting desktops and user issues via phone, email, remote access tools and onsite at client locations. Service Engineer will also perform troubleshooting and support for servers, projects and client onboarding., • Travel to client locations to troubleshoot, install and maintain equipment., • Communicate with clients as needed to resolve support issues and relay client requests for purchase of additional services., • Participate in meetings and train Help Desk and Field Technicians., • Assist in developing client It strategies., • Assist Help Desk Technicians, Field Technicians and Field Engineers with support issues that require escalation as directed by the Service Coordinator or Service Manager. About myIT.com: We are a highly successful Technology Services Company that has been serving clients in the Dallas-Fort Worth area for over 25years. Our clients are primarily locally-based small to medium sized professional businesses and non-profit organizations. Our clients rely on us for their day-to-day IT needs along with strategic planning and management of their technology infrastructure. As part of our Full Time professional staff youll enjoy: • Great pay, • Benefits, • Paid Time Off, • Company Provided Training, • Growth Opportunities with a proven industry leader, • The ability to use your talents and the skills youve mastered as an IT Pro Qualifications, Skills and Experience Required: • In order to be considered for the position and move forward in the interview process, qualified applicants must complete an assessment*, • Ability to pass test demonstrating strong written and verbal communications skills, • 5+ years IT support experience, 3 or more years as a Field Engineer, with proven experience working on servers and multiple complex projects as lead technician, • Ability to pass advanced proficiency tests on hardware, software, networking, servers and cloud services and mobile devices, • Ability to work as scheduled sitting, standing, stooping, lift and carry 35 lbs., use a keyboard, and speak on the phone, • Ability to travel to client site using private vehicle, hired vehicle, walking or public transit, • Ability to be lead technician on server and workstation projects and diagnose network issues, • Cloud, Microsoft 365 and Microsoft Azure certifications a plus!, • Managed Services (MSP), Connectwise and Kaseya experience a plus!

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description Job Description As a Senior Electrical Engineer, you will work directly with some of the world's largest technology companies and other mission-critical clients. You will serve as an electrical engineer on projects, design calculations, write technical reports, and prepare documents. Experience in the Data Center industry is preferred. You will also coordinate with other Olsson teams, professional staff, technical staff, and clients. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills, • Ability to contribute and work well on a team, • Bachelor's degree in electrical engineering, • 8+ years of electrical engineering experience, • Licensed PE, • Ability to be a self-starter to take on a variety of tasks to best serve the client and their project work, • Investigation and troubleshooting of problems to find solutions #Remote #LI-DNI Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As a Senior Mechanical Engineer, you will work directly with some of the world's largest technology companies and other mission-critical clients. You will serve as a mechanical engineer on projects, design calculations, write technical reports, and prepare documents. Experience in the Data Center industry is preferred. You will also coordinate with other Olsson teams, professional staff, technical staff, and clients. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills, • Ability to contribute and work well on a team, • Bachelor's degree in mechanical engineering, • 5-20 years of mechanical engineering experience, • Revit experience preferred, • Central utility experience preferred, • Data Center experience preferred, • Licensed PE, • Ability to be a self-starter to take on a variety of tasks to best serve the client and their project work, • Investigation and troubleshooting of problems to find solutions #LI-DNI Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionFort Worth, TX | Future project in Arlington This Jobot Job is hosted by: Alex Hall Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $70,000 - $90,000 per year A bit about us: A national developer-builder with a strong presence in Texas is hiring a Project Engineer for a 300+ unit ground-up multifamily project in Fort Worth, with a follow-up assignment already lined up in Arlington. If you’re early in your career (1–3 years of experience) and want to learn how large-scale podium and wrap-style projects are built from the inside, this is a chance to join a team that runs construction in-house, not as a 3rd-party GC. Why join us? Job Details What You’ll Be Doing -Assist in tracking submittals, RFIs, and material deliveries -Support daily coordination with field and office teams -Maintain logs, track cost codes, and support schedule updates -Help ensure quality, safety, and documentation are executed properly -Work under experienced PMs and Supers on high-profile multifamily work What You Bring -1–3 years of experience in construction (internships or full-time roles) -Strong attention to detail and the ability to stay organized on active jobsites -Eagerness to grow into a Project Manager or Superintendent role over time -Familiarity with Procore or construction software is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Job description PRIMARY FUNCTION Under direction of the Senior Quality Manager, the Quality Engineer will provide technical quality support to the manufacturing production lines. ESSENTIAL DUTIES AND RESPONSIBILITIES ● Conduct routine periodic tests or audits on processes and products. ● Perform OBA/ORT as required. ● Compile quality data and create reports that are suitable for customer presentation. ● Help train and monitor IPQC personnel. ● Support QHSE certification programs. PREFERRED SKILLS & QUALIFICATIONS ● Bachelor’s degree (or equivalent) in engineering or related field. ● ASQ Quality Engineer certification. ● Strong knowledge of Microsoft Office Applications. ● Ability to work with all levels of quality personnel. EXPERIENCE ● Minimum 3 years of experience working in a similar capacity as a manufacturing quality engineer. ● Experience creating quality reports with Excel and Minitab. ● Strong working knowledge of Agile and SAP. Job Type: Full-time Company DescriptionSalcomp is the world leading charger manufacturer and has provided close to 4 billion units of mobile phone chargers for our customers in the past 3 decades. It is also world’s preeminent Complex Electronics Manufacturing Services (EMS) provider. We are committed to providing our global customers with innovative solutions for their electrical manufacturing and services. Salcomp Energy USA is a new subsidiary in the US that focuses on manufacturing of green energy products. The facility will be equipped with advanced manufacturing processes and equipment. We strive to make the world a clean and better place to live. Salcomp Energy USA provides excellent working environment with competitive compensation package and excellent career future for our peopleSalcomp is the world leading charger manufacturer and has provided close to 4 billion units of mobile phone chargers for our customers in the past 3 decades. It is also world’s preeminent Complex Electronics Manufacturing Services (EMS) provider. We are committed to providing our global customers with innovative solutions for their electrical manufacturing and services. \r\n\r\nSalcomp Energy USA is a new subsidiary in the US that focuses on manufacturing of green energy products. The facility will be equipped with advanced manufacturing processes and equipment. We strive to make the world a clean and better place to live. \r\n\r\nSalcomp Energy USA provides excellent working environment with competitive compensation package and excellent career future for our people

Job DescriptionCivil Engineer (EIT) Assistant Manager with Established and Growing firm in DFW Metroplex This Jobot Job is hosted by: Jeffrey Skarvan Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $90,000 - $110,000 per year A bit about us: Our client is a mid-sized firm committed to building genuine relationships with their clients and within their team. Their size allows them to maintain a personal touch while possessing the expertise and skill set to tackle projects of any scale. They have won and delivered major projects for globally recognized clients. Why join us? Excellent compensation and benefits, along with a team culture that fosters camaraderie, mentorship, and ample opportunities for advancement. Job Details Job Details: Are you an ambitious, detail-oriented professional with a passion for civil engineering? Our organization is seeking a Permanent Assistant Civil Engineering Manager, EIT to join our dynamic team. This position offers a unique opportunity to play a pivotal role in the planning, design, and execution of a wide range of civil engineering projects. We offer a collaborative work environment where you can apply your skills and experience to real-world challenges and contribute to our mission of building a sustainable future. If you have a knack for problem-solving and a desire to make a positive impact, we want to hear from you! Responsibilities: As an Assistant Civil Engineering Manager, EIT, you will: 1. Assist in the management and coordination of civil engineering projects, including commercial and residential developments, transportation projects, and design-build initiatives., 2. Utilize Civil 3D, Open Roads, and other engineering software to create detailed design plans and specifications., 3. Oversee the design and implementation of roadway, drainage, and paving systems, ensuring compliance with all relevant codes and standards., 4. Collaborate with project teams to develop project schedules, budgets, and quality control measures., 5. Coordinate with contractors, stakeholders, and regulatory agencies to facilitate smooth project execution., 6. Contribute to the preparation of project proposals, reports, and documentation., 7. Provide technical guidance and mentorship to junior engineering staff., 8. Stay abreast of industry trends, technologies, and best practices, and apply this knowledge to your work. Qualifications: To be considered for this role, you must have: 1. A Bachelor’s degree in Civil Engineering or a related field., 2. A minimum of 5 years of experience in civil engineering, with a focus on project engineering, commercial projects, and design-build., 3. An Engineering-in-Training (EIT) certification., 4. Proficiency in Civil 3D, Open Roads, and other relevant engineering software., 5. Demonstrated experience with roadway, drainage, and paving design., 6. A track record of successful project management, with the ability to oversee multiple projects simultaneously., 7. Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse teams., 8. Strong problem-solving skills and attention to detail., 9. A commitment to continuous learning and professional development. This position offers a unique opportunity to contribute to diverse and challenging projects, and to grow your skills and career within a supportive and forward-thinking organization. If you are a dedicated professional with a passion for civil engineering, we invite you to apply. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking a mid-level Materials & Process Engineer focused on manufacturing complex parts made from polymers and composites that push the boundaries of what's possible. This role centers on solving challenging part production problems by designing and building whatever equipment and process necessary to make build ultra-lightweight and load carrying structures. This role will be located in Saratoga, CA.What you'll be doing: • Complex Part Engineering, • Engineer solutions for producing parts with complex geometries, tight tolerances, and demanding specifications., • Solve process design challenges for parts with undercuts, variable wall thickness, multi-material construction, and precision features., • Develop approaches for parts that others consider unmanufacturable, with focus on volume production capability., • Work with advanced polymer and composite materials to create high-performance components for large-scale manufacturing., • Problem-Solving Through Equipment Development, • Build whatever equipment is needed to make complex parts work - forming presses, custom tooling, specialized fixtures, and high-throughput processing equipment, • Create SolidWorks models and detailed drawings with proper GD&T for tooling and equipment designed for high volume processes., • Machine, weld, and assemble custom solutions when off-the-shelf equipment won't suffice for production requirements, • Prototype rapidly until parts meet specifications consistently and processes are ready for scale-up, • Part Development & Manufacturing Solutions, • Take on part challenges that require innovative manufacturing approaches capable of high-volume production, • Design and build forming processes for complex brackets, housings, structural components, and precision assemblies with polymer and composite materials, • Solve inserts, handling, and quality control challenges for difficult geometries in production environments, • Develop repeatable, high-volume processes for complex parts that can efficiently scale to large production runs, • Hands-On Implementation, • Build and test whatever tools, fixtures, and equipment are needed to make parts work at production volumes, • Troubleshoot part quality issues and implement design solutions for volume manufacturing, • Work directly with prototype parts to understand manufacturing constraints and scale-up opportunities for polymer and composite components What you will bring to this role:, • Bachelor's degree in Mechanical Engineering, Materials Engineering, or related technical field, • 3-6 year's experience solving complex part manufacturing challenges with focus on scalable processes, • Expert-level SolidWorks skills including advanced modeling, drawings, and GD&T application, • Experience with advanced materials and high-volume forming processes such as thermosets, thermoplastics, elastomers., • Hands-on fabrication skills: machining, welding, assembly, and creative problem-solving, • Track record of solving challenging manufacturing problems while maintaining production viability Essential Skills:, • Part-focused thinking: ability to reverse-engineer manufacturing solutions from part requirements with volume production in mind, • SolidWorks: advanced modeling for complex parts and custom tooling solutions designed for production scale, • GD&T: proper application for complex parts with challenging tolerance requirements in volume manufacturing, • Creative problem-solving: building non-standard solutions for unique part challenges that work at scale, • Hands-on fabrication: whatever skills are needed to make the solution work in production, • Materials expertise: understanding polymer and composite material behavior in complex, high-volume forming applications, • Production scaling: experience transitioning prototype processes to efficient, large-volume manufacturing What Sets You Apart:, • You see a complex part and immediately start thinking about how to make it efficiently at volume, • You're not limited by existing equipment - you build what's needed to solve the problem for production scale, • You thrive on part challenges that others walk away from, especially when volume production is required, • You understand that the equipment is just a tool to achieve the real goal: perfect parts at production quantities, • You can take a challenging part specification and deliver a working manufacturing solution ready for large-scale production, • You think about scalability, cycle times, and production economics from day one • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Job Title: Electrical Engineer - Commercial / Healthcare Construction (Power / MEP Systems) Location: DFW Metroplex, TX (On-site) Employment Type: Full-Time Salary: $100,000 - $150,000 Annually (Based on experience) Company Introduction This opportunity is with a nationally recognized construction firm specializing in large, complex commercial and healthcare projects. The company is known for its strong safety culture, technical expertise, and ability to execute high-visibility work across the country. The team is currently delivering a major $500M healthcare campus in Fort Worth, along with several significant projects throughout the DFW region. As an employee-owned organization, it offers long-term stability, a collaborative atmosphere, and meaningful opportunities for professional advancement. Role Overview The Electrical Engineer manages all aspects of the electrical scope on major commercial and healthcare builds. This includes coordinating early design details, overseeing field installation, supporting estimates, managing subcontractors, and ensuring systems are tested, commissioned, and performing to project standards. Qualified candidates should have experience with power distribution, lighting, and low-voltage systems, as well as a background working on large, complex projects ideally $200M and above. This position provides the chance to help deliver critical, high-performance facilities while working closely with an experienced project team across the DFW metroplex. Core Responsibilities • Lead the electrical scope of work, ensuring systems meet design intent, quality standards, and schedule expectations., • Develop and evaluate electrical estimates, budgets, and system analyses during pre construction., • Review electrical design options and provide value-engineering recommendations to optimize cost and performance., • Coordinate with design teams, subcontractors, and field personnel to ensure seamless MEP system integration., • Oversee installation of electrical systems, including switchgear, lighting, grounding, emergency power, and low-voltage networks., • Perform site inspections to confirm compliance with plans, specifications, and safety standards., • Manage and verify commissioning and testing of electrical systems, including power distribution and life-safety systems., • Review shop drawings and submittals for accuracy and constructability., • Participate in subcontractor bid reviews, scope development, and contract recommendations., • Bachelors degree in Electrical Engineering, Mechanical Engineering, Architectural Engineering, or related field (or equivalent experience)., • Minimum 10 years of electrical engineering or construction experience, preferably within a general contracting or design-build environment., • Proven success delivering large-scale commercial projects valued at $200 million or more., • Strong technical understanding of building electrical systems, including medium/low-voltage power, lighting, and control systems., • Ability to interpret and analyze electrical drawings, specifications, and commissioning documentation., • Experience managing subcontractors and coordinating with cross-functional project teams., • Excellent problem-solving, communication, and organizational skills., • Valid drivers license and willingness to work across the DFW region as needed., • Professional Engineer (PE) license or active progress toward licensure. (Preferred), • Previous experience with healthcare or hospital electrical systems (critical power, emergency, and life safety). (Preferred), • Familiarity with BIM coordination, construction technology, and commissioning processes. (Preferred), • Background in power distribution design, lighting systems, and low-voltage integration. (Preferred), • Competitive salary based on experience., • Car allowance provided for project-related travel., • Annual performance bonus., • Comprehensive benefits package including:, • Medical, dental, and vision insurance, • 401(k) with company contributions, • Employee Stock Ownership Plan (ESOP), • Life and disability insurance, • Paid time off, holidays, and parental leave, • Professional development and continuing education opportunities., • Long-term growth potential within a respected, employee-owned organization.

Job Title: AV Technician (Contract) Location: Fort Worth, TX Job Type: Contract Worksite Requirement: 100% Onsite Position Overview: We are seeking a contract AV Engineer to support conference room upgrades and handle daily break/fix AV support in a professional office environment. The ideal candidate will have experience with Teams Rooms and Zoom Rooms, be comfortable troubleshooting AV systems, and capable of assisting with or overseeing wall-mounted display installations. This role requires a proactive approach to resolving AV issues efficiently and professionally. Responsibilities: Respond to and manage AV support tickets Provide break/fix support for projectors, displays, and conference room AV systems Troubleshoot and maintain Teams Rooms and Zoom Rooms, including top-level issue diagnosis Oversee and assist with installation and replacement of wall-mounted displays Maintain accurate records of AV issues, repairs, and system changes Collaborate with IT or Facilities teams as needed to complete tasks Requirements: Minimum of 2 years of experience in AV engineering or support Hands-on experience with projectors, displays, Teams Rooms, and Zoom Rooms Ability to diagnose AV issues and implement reliable solutions Comfortable working with physical hardware, including mounting and lifting AV equipment Professional communication and customer service skills Preferred Qualifications: Familiarity with control systems such as Crestron or Extron Basic understanding of networking as it relates to AV functionality CTS or other relevant AV certifications Additional Information: This is a full-time contract role based entirely onsite in Fort Worth, TX. You will be working as part of a collaborative and responsive team in a professional setting. Candidates must be local or able to commute daily.