Trabajos welder en Woodland Park, New JerseyCrear alertas

The Welder I Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.

The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under s Welder, Welding, Equipment Maintenance, Transportation, Skilled Trades, Repair

Location: Bergen County, NJ Compensation: $35–$45/hour + Benefits Schedule: Night Shift Monday–Friday, 4:00 pm to 1:30 am A growing food manufacturer is seeking an experienced Fabricator / Sanitary Welder NIGHT SHIFT to support Engineering and Maintenance. This is a hands-on role for someone capable of independently taking stainless-steel fabrication projects from layout and fabrication through welding, finishing, installation, and turnover. The ideal candidate has advanced sanitary welding and stainless-steel fabrication experience and can serve as a technical resource within the plant. Responsibilities • Fabricate, modify, install, and repair stainless-steel equipment, piping, tanks, conveyors, platforms, guarding, hoppers, and other components., • Perform high-quality TIG and MIG welding, including thin-gauge and sanitary stainless applications., • Lay out, cut, form, grind, polish, passivate, and finish stainless steel and other metals., • Read blueprints, weld symbols, P&IDs, schematics, and engineering drawings., • Build components from drawings and field measurements., • Support equipment installations, utility tie-ins, capital projects, and equipment upgrades., • Fabricate replacement parts to reduce equipment downtime., • Apply sanitary design standards using 304/316L stainless and food-grade materials., • Support troubleshooting, preventive maintenance, and continuous improvement., • Mentor less-experienced fabricators and maintenance technicians. Qualifications • 7+ years of hands-on welding and fabrication experience., • 3+ years in food, beverage, dairy, pharmaceutical, or another sanitary manufacturing environment., • Advanced TIG and MIG stainless-steel welding skills., • Experience with sanitary tubing, Tri-Clamp fittings, weld ferrules, and butt welds., • Strong stainless-steel layout, fabrication, grinding, polishing, and finishing skills., • Ability to independently complete fabrication projects., • Ability to read engineering drawings, weld symbols, and P&IDs., • Knowledge of sanitary design, GMPs, food safety, and CIP systems., • AWS D1.6 or ASME Section IX certification is a strong plus., • Orbital welding experience preferred. Why Join? • $35–$45/hour, • Monday–Friday night shift, • Benefits, • Skilled fabrication work with significant autonomy, • Opportunity to support equipment improvements and capital projects, • Stable, growing food manufacturing environment Occasional weekend or shutdown work may be required.

The Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints. The position requires the ability to independently set up welding equipment, interpret fabrication drawing Welder, Welding, Manufacturing, Staffing, Production, Fabrication

Job DescriptionWelder Fairfield, NJ Manufacturing Facility Shift: 2nd Shift, Monday–Friday, 2:30 PM–11:00 PM Pay: $17.50–$19.75/hr base + $2.25/hr shift differential ($19.75–$22.00/hr, based on experience) About the Role We're looking for Welders to join our Fabrication department on 2nd shift. You'll weld frames, legs, and other components, working from assembly drawings to produce quality parts and correct anything that falls out of spec. What You'll Do • Set up and operate TIG and MIG welding machines, • Select the correct jig or fixturing for each job, • Weld aluminum and steel parts as needed, • Complete drill and grind work as required, • Inspect finished welds and rework parts that are out of spec, • Read and interpret assembly drawings, BOMs, and related procedures, • Navigate computer-generated production boards, • Keep your workstation clean per 5S and safety protocols, • Support daily work and special projects alongside your team What You'll Need • High school diploma or GED, • Previous welding experience preferred, • Mechanical aptitude and the ability to follow directions, • Comfortable reading assembly drawings and BOMs, • Reliable attendance and flexibility with changing priorities, • Basic comfort navigating production systems on a computer Physical Requirements Standing up to 10 hours/day with frequent bending, reaching, and coordinated hand movements. Lifting up to 50 lbs regularly and up to 100 lbs occasionally. Steel-toed shoes, welding mask, and supplemental PPE (weld gloves, sleeves, jackets/aprons) required. Warehouse environment, no air conditioning Full-time, Weekly Pay, and Benefits • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programs

Job DescriptionDescription: The Welder sets up and operates welding equipment, reviews drawings, and leads welders to ensure quality production standards are met. Key Responsibilities Not Limited To: • Weld ferrous and non-ferrous materials (MIG/TIG/Stick), • Set up jobs, tools, and materials; fabricate jigs/fixtures as needed, • Lead and train welders on quality and production methods, • Read and interpret blueprints and specifications, • Work independently to complete assignments and meet schedules, • Perform inspections and quality checks, • Communicate job status and support needs to the Shop ForemanRequirements: Skills & Qualifications • Basic math and strong attention to detail, • Knowledge of safety standards, • Willingness to be cross-trained, • Strong organization and communication skills, • Able to stand for extended periods and lift, push, or pull up to 40lbs unassisted, • Works in a typical production environment; must be flexible to work additional hours as needed, • High school diploma, GED, or equivalent experience, • 2–3 years of welding experience in a machine shop (preferred), • 1 year of supervisory or lead experience, • Bilingual in Spanish is a plus --------------------------------------------------------------------------------------------------------------------------- NJ UNION BENEFITS: • Medical, Dental and Vision insurance, • Life Insurance, • Pension, • Paid Time Off, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ---------------------------------------------------------------------------------------------------------------------------- We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description TIG WELDER An industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description We are seeking a part-time Welding Instructor to work alongside the senior instructor, follow the welding curriculum, and support students in the classroom and welding lab. Schedule: Monday-Thursday 4:30pm to 9:30pm Duties and Responsibilities • Assist with student instruction in both the classroom and welding lab, • Guide and support student learning in a safe, structured environment, • Demonstrate welding, cutting, fitting, and fabrication techniques, • Prepare materials and projects for instruction, • Weld, fabricate, cut, and visually inspect welds on a variety of materials and processes, • Work with mild steel, stainless steel, and aluminum, • Facilitate workshop sessions as needed, • Enforce all shop and lab safety procedures, • Perform other duties as assigned Qualifications • Current welding certification or completion of an AWS program, trade school, 900-hour welder/fabricator program, or equivalent training., • and/or 5-7 years of documented industry experience, • Strong knowledge of welding theory, welding code requirements, and certification standards, • Demonstrated commitment to workplace and lab safety, including the ability to follow and enforce safety protocols, • Ability to work effectively with students of diverse backgrounds, skill levels, and learning needs, • Ability to pass a multi-process welding and cutting evaluation, • Minimum of 5 years of experience in fabrication, fitting, ironwork, welding, CNC, pipe, or related metalworking industries, whether civilian or military, • Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, plasma cutting, and oxy-fuel cutting in multiple positions, • Minimum of 3G certification or equivalent skill level in at least two welding processes Certifications • Destructive test certification, • OSHA certification, • Torch and fire watch certification, • DOT certification Candidate must pass a practical welding test. The completion of a background check will be required for the selected candidate. Compensation: The hourly pay for this position is $28. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description Company overview: Diversified Heat Transfer (DHT) is a leading engineering and manufacturing company of heat exchange equipment and systems for the residential, commercial, and industrial markets. With more than 80 years of experience, DHT designs, builds, and manufactures innovative, technology-driven products that provide flexible, high-quality, and cost-effective solutions for a wide variety of applications. Our continued growth and success means we’re always on the lookout for talented individuals to join our team. At DHT, we are committed to fostering a culturally diverse workforce where every individual is valued and respected. We believe that diversity drives innovation and creativity, and we are proud to be an equal opportunity employer. Position overview: The Welder Combination is responsible for welding pressure vessels and structural steels by assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape, following standard welding procedures and techniques to optimize Flux Cored Arc, Stick, MIG, TIG, and plasma welding processes on steel, stainless steel, aluminum, and nickel materials. Responsibilities: • Weld materials for pressure vessels and structural steel products using the correct materials to join the metals together. Pressure vessel welding must meet all applicable ASME and TEMA specifications and pass X-Ray, die penetrant and visual inspections., • Weld MIG, TIG, and stick pressure vessels and structural steels, • Measure and cut materials to specifications., • Read and understand blue prints according to weld specifications and blue prints prior to starting a project., • Review engineering change orders (ECO’s) and implement desired changes., • Source the materials to be used in the project., • Use quality assurance instruments., • Check finished work to make sure that it falls within the tolerances marked on the blue prints., • Follow all standardized processes, including safety policies and PPE requirements., • Ensure equipment is maintained and quality standards are met with all products., • Adhere to 5Sstandards daily and participate in Kaizen events. Qualifications: • 3 years minimum MIG,TIG, stick welding experience in manufacturing environment or combo of education/training and work experience., • Vocational School or Technical Training required. Welding Certificate preferred., • Ability to pass ASME coupon tests and obtain ASME Certified Combination Welder, • Ability to handle light and average weight parts., • English comprehension is a must., • Good verbal and written communication skills., • Good mechanical aptitude and ability to use hand and power tools., • General understanding of mechanical blueprints and highly sophisticated equipment., • Ability to listen and learn from instructions., • Positive attitude to support company policies and ability to participate in the department's training programs and all 5S initiatives., • Must be flexible and able to adapt to changing responsibilities., • Work overtime as needed when business demands require., • Ability to lift up to 50 lbs.

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

Job SummaryPerform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam. Perform welding using Heli-arc, Spot weld, and Electron Beam equipment. Inspect parts continuously to ensure that the weldi

Location: Bergen County, NJ | Compensation: $40$45/hour + Benefits | Schedule: MondayFriday, 6:00 AM3:30 PM A growing food manufacturer is seeking an experienced Fabricator / Sanitary Welder to support Engineering and Maintenance. This is a hands-on role for someone capable of independently taking stainless-steel fabrication projects from layout and fabrication through welding, finishing, installation, and turnover. • Fabricate, modify, install, and repair stainless-steel equipment, piping, tanks, conveyors, platforms, guarding, hoppers, and other components., • Perform high-quality TIG and MIG welding, including thin-gauge and sanitary stainless applications., • Lay out, cut, form, grind, polish, passivate, and finish stainless steel and other metals., • Read blueprints, weld symbols, P&IDs, schematics, and engineering drawings., • Build components from drawings and field measurements., • Support equipment installations, utility tie-ins, capital projects, and equipment upgrades., • Fabricate replacement parts to reduce equipment downtime., • Apply sanitary design standards using 304/316L stainless and food-grade materials., • Support troubleshooting, preventive maintenance, and continuous improvement., • Mentor less-experienced fabricators and maintenance technicians., • 7+ years of hands-on welding and fabrication experience., • 3+ years in food, beverage, dairy, pharmaceutical, or another sanitary manufacturing environment., • Advanced TIG and MIG stainless-steel welding skills., • Experience with sanitary tubing, Tri-Clamp fittings, weld ferrules, and butt welds., • Strong stainless-steel layout, fabrication, grinding, polishing, and finishing skills., • Ability to independently complete fabrication projects., • Ability to read engineering drawings, weld symbols, and P&IDs., • Knowledge of sanitary design, GMPs, food safety, and CIP systems., • AWS D1.6 or ASME Section IX certification is a strong plus., • Orbital welding experience preferred., • $40$45/hour, • MondayFriday, • Benefits, • Skilled fabrication work with significant autonomy, • Opportunity to support equipment improvements and capital projects, • Stable, growing food manufacturing environment Occasional weekend or shutdown work may be required.

This is a senior-level position for a highly skilled fabricator who can independently take stainless-steel fabrication projects from concept and layout through welding, finishing, installation, and turnover. This individual will work closely with Engineering, Maintenance, and Production and serve as

Welder/FabricatorA growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team.

WelderSince 1953, Ferguson has been a source of quality supplies for a variety of industries.Together We Build Better infrastructure, better homes and better businesses.We exist to make our customers' complex projects simple, successful, and sustainable.We proactively solve problems, adapt and grow

Entry-Level B WelderInterstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in O

Welder/FabricatorA growing food manufacturing facility in Bergen County is looking for an experienced Welder/Fabricator to join its night-shift team.

Welders-Direct HireWe're seeking Welders to work with a premier manufacturing client in Kearny, NJ.Direct HireJob SummaryThe Welder Class 2 is a mid-level welding position responsible for welding prefabricated components and fabricating assemblies from blueprints.The position requires the ability to

Interstate Waste Services - - Responsibilities: Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components; Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel; Interpret re

WelderThe Welder sets up and operates welding equipment, reviews drawings, and leads welders to ensure quality production standards are met. Key Responsibilities Not Limited To:Weld ferrous and non-ferrous materials (MIG/TIG/Stick)Set up jobs, tools, and materials; fabricate jigs/fixtures as neededL

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 9fV7OtpanF

Perform Electron beam welding on assemblies following procedures; able to set up and tend machines designed to weld through the use of a high-velocity electron beam.Review work orders to ensure familiarization with job requirements.Follow technical instructions, interpret engineering blueprints and

The Welder sets up and operates welding equipment, reviews drawings, and leads welders to ensure quality production standards are met. Lead and train welders on quality and production methods.

Our client is seeking an experienced Industrial Maintenance Mechanic for the 1st shift to join their unionized manufacturing team, performing repairs and maintenance on a variety of production and utility equipment.In this hands-on role you will be working with robotics, automated systems, hydraulic

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido.Somos profesionales

THIRD-PARTY AGENCIES: PLEASE DO NOT CONTACT US REGARDING THIS POSITION.The Malwin Company is an aerospace and defense enterprise that brings together specialized engineering, manufacturing, and technology capabilities under one organization.Our teams design, develop, manufacture, and support highly

Maintenance Technician (1st Shift).We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, performance, and efficiency of our manufacturing operations.This role is responsible for maintaining plant equipment, troubleshooting elect

PrideStaff - - Responsibilities: Load and unload trucks and incoming containers using forklift; Label, track and pack inventory using barcode systems; Prepare warehouse receipts by taking dimensions and weight of incoming cargo and photos; Maintain cleanliness and safety compliance with TSA/OSHA co

Accountable for proper maintenance and repair of all plant/buildings and grounds equipment to include, troubleshooting, preventive maintenance and predictive maintenance.Upload, download, configure, modify and troubleshoot PLC programs and process instruments.May be responsible for building and wiri

PrideStaff - - Responsibilities: Unload materials and merchandise from incoming vehicles and stack them to assigned places; Locate and move stock of products to pallets or crates for storage or shipment; Identify damages and report shortages or quality deficiencies; Transport raw materials to produ

Aerotek - - Responsibilities: Weigh packages and label them appropriately; Operate sit-down forklift; Inspect packages and shipping containers; Assemble daily orders by shipping location; Maintain records of packages and shipments.

Maintenance Technician (1st Shift).If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information.We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, pe

Aerotek - - Responsibilities: Assemble components per drawings and operation sheets; Perform weighing, loading, and pressing operations; Build and route wire harnesses per specifications; Solder small wires and terminal soldering; Inspect assemblies for quality and log production data.

Aerotek - JobID: JP-005851603 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Maintenance Technician (1st Shift).If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information.We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, pe

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.Please read the following job description thoroughly to ensure you are the right fit for this role before applying.We are professionals in Industrial Maintenance and we make factories run better.Fun

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.Please read the following job description thoroughly to ensure you are the right fit for this role before applying.We are professionals in Industrial Maintenance and we make factories run better.Fun

Aerotek - - Responsibilities: Measure and verify dimensions with calipers and gauges; Crimp, strip, and connect wires and cables; Assemble pumps, blowers, and motors; Perform daily maintenance on measuring tools and calibration; Follow diagrams or schematics.

Aerotek - - Responsibilities: Read and interpret electrical and mechanical assembly drawings; Perform electrical wiring and switchgear assembly; Assemble products to production schedule; Collaborate with shop leads on progress and quality; Lead a crew on the shop floor when required.