Trabajos flexible en PintoCrear alertas

Médico/a de Salud Laboral ¿Te apasiona cuidar de la salud de las personas en su entorno laboral y buscas un nuevo reto profesional en Valdemoro? 🩺🌱 Si crees en una medicina preventiva, cercana y con impacto real en el bienestar de las personas, esta oportunidad puede ser el siguiente paso en tu carrera. En El Corte Inglés sabemos que la salud y el bienestar de nuestros equipos son fundamentales para construir entornos de trabajo seguros, saludables y sostenibles. Por ello, buscamos incorporar un/a Médico/a del Trabajo para nuestro centro de Valdemoro (Madrid), una posición clave dentro de nuestro Servicio de Prevención Mancomunado que contribuirá directamente a la protección y promoción de la salud de las personas trabajadoras. Se trata de una oportunidad para integrarte en una compañía líder, con una sólida cultura preventiva y un firme compromiso con las personas. Tu labor tendrá un impacto directo en la calidad de vida de miles de profesionales, participando activamente en iniciativas que fomentan el bienestar, la prevención y la mejora continua. ¿Qué harás? Tu misión será velar por la salud integral de las personas trabajadoras, promoviendo la prevención, la asistencia médica y el desarrollo de hábitos saludables dentro de la organización. En tu día a día te encargarás de: • Colaborar con diferentes departamentos para identificar y dar respuesta a las necesidades de salud y bienestar de las personas trabajadoras., • Ejecutar programas de salud y bienestar, incluyendo campañas de vacunación y acciones de prevención de enfermedades., • Evaluar y gestionar casos de enfermedades profesionales y accidentes de trabajo, realizando el seguimiento correspondiente., • Implementar medidas de prevención y promoción de la salud en el entorno laboral., • Realizar consultas médicas y proporcionar atención y tratamiento a los empleados cuando sea necesario., • Participar en iniciativas de sensibilización y promoción de hábitos saludables., • Contribuir a la mejora continua de los procesos de salud laboral y al fortalecimiento de la cultura preventiva de la compañía., • Trabajar de manera coordinada con profesionales de diferentes áreas, aportando una visión médica especializada para la protección de la salud de las personas. ¿A quién buscamos? Buscamos una persona con Licenciatura o Grado en Medicina y Especialidad en Medicina del Trabajo. Valoraremos especialmente una clara orientación a la prevención y promoción de la salud, así como la capacidad para trabajar en equipo y colaborar con diferentes áreas de la organización. Además, buscamos profesionales con excelentes habilidades de comunicación, cercanía en el trato, vocación de servicio y sensibilidad hacia el bienestar de las personas. Será importante contar con capacidad de análisis, criterio clínico, iniciativa y compromiso con la mejora continua. Si te motiva desarrollar tu carrera en un entorno dinámico, colaborativo y con un fuerte enfoque en las personas, queremos conocerte. ¿Qué ofrecemos? En El Corte Inglés apostamos por el talento, la estabilidad y el desarrollo profesional a largo plazo. Formarás parte de una compañía líder, con una fuerte cultura corporativa y un firme compromiso con la seguridad, la salud y el bienestar de las personas. Contamos con un plan de retribución flexible, seguro de vida, descuentos especiales para empleados y acceso a formación continua a través de nuestro Centro Universitario y escuelas de oficios. Te ofrecemos: • Un entorno colaborativo y multidisciplinar, donde la salud laboral es una prioridad estratégica., • Proyectos con impacto real, que mejoran la calidad de vida de miles de personas trabajadoras., • Formación continua y oportunidades de crecimiento dentro del área de Prevención de Riesgos Laborales., • Acompañamiento y recursos para desarrollar tu labor con rigor, autonomía y apoyo profesional. 💚 Únete a nuestro equipo en Valdemoro y marca la diferencia en la salud laboral. Tu vocación puede contribuir a crear entornos de trabajo más seguros, humanos y sostenibles. ¡Te esperamos!

Overview As a Manufacturing Engineer in the Harness/Electrical/Electronics space, you will lead end-to-end harness manufacturing and integration, optimizing time and cost while meeting project requirements and standards. You collaborate with engineering domains to ensure feasible designs and industrialization. You will define manufacturing processes, bills of materials, and integration plans, while supporting bid planning and shopfloor execution. The role emphasizes LEAN methods, modularization, and eco-efficiency in a space manufacturing setting. You will work across sites and with partners to deliver flight-relevant assemblies and campaigns. Compensaciones / Beneficios • flexible working arrangements, • equal opportunities Responsabilidades, • Validate design feasibility with engineering during development to ensure industrial compatibility, • Develop and maintain the Manufacturing Dossier with work instructions, data and test documents, • Analyze and optimize manufacturing technologies and capabilities across Space Spain Plant and partners, • Define Material & Process selections and ensure alignment with project execution, • Define Manufacturing BOM and interface with Supply Chain for material availability, • Contribute to bid phase through industrial planning, cost and schedule inputs, • Provide inputs to industrial planning including line balance, process times, and lead times, • Support production on breadboards, qualification and flight models, including on-site assistance, • Create process definitions in concurrence with Engineering and Mechanical Design Office, • Characterize work sequences, industrial parameters per Airbus OES guidelines, and identify tooling needs, • Integrate quality inputs (Control Plan) and PFMEA considerations into production, • Schedule delivery rates, optimize resources, and consider economic aspects, • Lead work preparation and release manufacturing procedures into work orders, • Foster feedback with Production & Quality teams and support CapEx planning when relevant, • Develop and deploy capabilities for new products/processes and support qualification campaigns, • Participate in SQCDP and shopfloor meetings, supporting recovery plans and scheduling, • Support AIT activities and participate in on-site campaigns or supplier facilities as needed Requisitos principales, • Aerospace electrical/electronic/system engineering background, • Experience in electrical harness manufacturing or related space industry processes, • 3-5 years in production/manufacturing engineering with space product relevance, • Ability to interpret documentation and produce clear instructions, • Knowledge of ECSS, ESCC, MIL standards within aerospace, • MS Office proficiency, especially Excel, • Understanding of electrical engineering and systems, • Desirable: CATIA Electrical Module, VBA/Google Apps Script programming, Windchill, SAP, • Willingness to work offsite for defined periods on short notice, • Strong teamwork, communication, planning, and adaptability, • team working, • process and quality driven, • high attention to detail, • Electrical harness manufacturing, • ECSS/ESCC/MIL standards, • MS Excel and MS Office

Overview As Production Responsible, you drive the industrial strategy for the space division’s production plant and oversee Ariane 6 structure lines. You will align manufacturing with cost, quality, and schedule targets while leading health, safety, and continuous improvement initiatives. The role requires coordinating cross-functional teams, planning plant activities, and supporting new programs and ramp-ups. This position offers exposure to cutting-edge space projects and a high‑tech, operation‑driven environment with growth opportunities. Compensaciones / Beneficios • Involvement in cutting-edge space projects, • Dynamic, high-tech environment with strong industrial impact, • Professional development opportunities and continuous training, • Commitment to flexible working arrangements, • Diversity and inclusion, • Stability of permanent employment Responsabilidades, • Deliver cost, quality, and on‑time performance for production lines, • Lead all fabrication operations in production, • Gather and analyze technical and financial data, • Lead Health & Safety routines on assembly lines, • Identify future production resource needs including space and subcontracting, • Drive improvement initiatives and determine outsourcing tasks, • Coordinate with technical, operational, and business teams for strategic alignment, • Implement operational gates strategy and manage plant routines (MPS, Go meetings), • Develop and maintain detailed planning of plant activities, • Coordinate internal stakeholders (quality, logistics, safety, planning), • Support New Program Proposals (BIDs) and define resources for new programs, • Propose layout, production flow and efficiency improvements; oversee new industrial means implementation Requisitos principales, • Degree in Industrial, Mechanical, Aerospace Engineering or similar, • Experience in plant management, industrial projects, or strategic planning (preferred), • Knowledge of production processes, investment planning, and subcontracting, • Strong communication, leadership, and strategic thinking skills, • Health & Safety focus, • leadership, • strong communication, • strategic thinking, • production processes, • investment planning, • subcontracting

Overview In this role you will lead aerodynamic design and modelling for Airbus Defence & Space aircraft, delivering robust aerodynamic data and models to support performance, handling qualities and loads. You will work within Flight Physics in a multidisciplinary environment, liaising with partners to meet program requirements. You will advance numerical and experimental prediction tools, contribute to wind tunnel campaigns, and connect with external research to drive optimisation and technology development. This is an impactful opportunity to shape external shapes and aerodynamics for diverse aircraft programs. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion commitment, • permanent contract, • full-time role Responsabilidades, • Design external air vehicle shapes and provide comprehensive aerodynamic models and data for performance, handling qualities and loads in steady and unsteady regimes, • Deliver optimised aerodynamic solutions and data to customers within time, cost, and quality constraints, • Develop and maintain technologies, methods, tools, and competencies across Aerodynamics to support programmes lifecycle, • Contribute to achievement of vehicle project aerodynamic and flight performance requirements within time, cost, and quality targets, • Develop expertise in numerical and experimental aerodynamic prediction tools, • Advance aerodynamic technologies in line with Company Strategy, • Engage with external research community in Aerodynamics and multidisciplinary air vehicle design, • Collaborate with related disciplines (structures, loads, stability & control, mass properties) to support integrated design, • Link with international partners and multidisciplinary teams to ensure alignment with program goals Requisitos principales, • Master’s degree in Aerospace Engineering (PhD level valuable), • At least 5 years of experience in aerodynamic design and characterisation, • Strong experience in meshing and numerical aerodynamic prediction tools, • Strong experience in generating aerodynamic databases from experimental and CFD data, • Strong experience in CAD tools, • Knowledge/experience in wind tunnel testing (valuable), • Knowledge/experience in safe separation (valuable), • Knowledge/experience in Python and Matlab (valuable), • English advanced; German and/or French valuable, • Meshing and numerical aerodynamic prediction tools, • Generation of aerodynamic databases from experimental and CFD data, • CAD tools, • Wind tunnel testing, • Safe separation knowledge, • Python

Overview In this role you will lead aerodynamic design and modelling for Airbus Defence & Space aircraft, delivering robust aerodynamic data and models to support performance, handling qualities and loads. You will work within Flight Physics in a multidisciplinary environment, liaising with partners to meet program requirements. You will advance numerical and experimental prediction tools, contribute to wind tunnel campaigns, and connect with external research to drive optimisation and technology development. This is an impactful opportunity to shape external shapes and aerodynamics for diverse aircraft programs. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion commitment, • permanent contract, • full-time role Responsabilidades, • Design external air vehicle shapes and provide comprehensive aerodynamic models and data for performance, handling qualities and loads in steady and unsteady regimes, • Deliver optimised aerodynamic solutions and data to customers within time, cost, and quality constraints, • Develop and maintain technologies, methods, tools, and competencies across Aerodynamics to support programmes lifecycle, • Contribute to achievement of vehicle project aerodynamic and flight performance requirements within time, cost, and quality targets, • Develop expertise in numerical and experimental aerodynamic prediction tools, • Advance aerodynamic technologies in line with Company Strategy, • Engage with external research community in Aerodynamics and multidisciplinary air vehicle design, • Collaborate with related disciplines (structures, loads, stability & control, mass properties) to support integrated design, • Link with international partners and multidisciplinary teams to ensure alignment with program goals Requisitos principales, • Master’s degree in Aerospace Engineering (PhD level valuable), • At least 5 years of experience in aerodynamic design and characterisation, • Strong experience in meshing and numerical aerodynamic prediction tools, • Strong experience in generating aerodynamic databases from experimental and CFD data, • Strong experience in CAD tools, • Knowledge/experience in wind tunnel testing (valuable), • Knowledge/experience in safe separation (valuable), • Knowledge/experience in Python and Matlab (valuable), • English advanced; German and/or French valuable, • Meshing and numerical aerodynamic prediction tools, • Generation of aerodynamic databases from experimental and CFD data, • CAD tools, • Wind tunnel testing, • Safe separation knowledge, • Python

Overview En CT Solutions buscamos un Project Manager PLM especializado/a en 3DEXPERIENCE para liderar implantaciones y evoluciones de la plataforma en clientes industriales de primer nivel. Serás el nexo entre el cliente y los equipos de consultoría y tecnología, asegurando plazos, calidad y alcance. Trabajarás con equipos multidisciplinares para diseñar, configurar e integrar la solución, y garantizar su adopción y satisfacción. Participas en proyectos PLM estratégicos y formas parte de una organización focalizada en transformación digital. Esta es una oportunidad para influir en implementaciones globales y trabajar con tecnologías Dassault Systèmes en un entorno híbrido. Compensaciones / Beneficios • Formación continua en tecnologías Dassault Systèmes, • Plan de desarrollo profesional y crecimiento, • Modalidad de trabajo híbrida/remota, • Horario flexible, • Retribución competitiva acorde a experiencia, • Incorporación a un equipo altamente especializado en PLM y transformación digital Responsabilidades, • Liderar implantación y despliegue de la plataforma 3DEXPERIENCE., • Definir y gestionar planificación, alcance, riesgos y recursos del proyecto., • Coordinar equipos funcionales y técnicos, internos y externos., • Gestionar la relación con clientes y stakeholders durante todo el ciclo del proyecto., • Supervisar análisis, diseño de procesos, configuración, integración y despliegue., • Identificar riesgos y proponer acciones correctivas., • Realizar el seguimiento económico y reportar estado del proyecto a dirección y cliente., • Garantizar adopción de la solución y satisfacción del cliente. Requisitos principales, • experiencia liderando implantaciones tecnológicas complejas, • experiencia en gestión de proyectos PLM/3DEXPERIENCE, • habilidad para coordinar equipos multidisciplinares, • gestión de relaciones con clientes y stakeholders, • habilidades analíticas y de gestión de riesgos, • capacidad de seguimiento económico y reporting a dirección, • visión global de proyectos, • gestión de clientes exigentes, • comunicación efectiva, • 3DEXPERIENCE, • gestión de proyectos PLM, • integración de sistemas

Overview As Production Responsible, you drive the industrial strategy for the space division’s production plant and oversee Ariane 6 structure lines. You will align manufacturing with cost, quality, and schedule targets while leading health, safety, and continuous improvement initiatives. The role requires coordinating cross-functional teams, planning plant activities, and supporting new programs and ramp-ups. This position offers exposure to cutting-edge space projects and a high‑tech, operation‑driven environment with growth opportunities. Compensaciones / Beneficios • Involvement in cutting-edge space projects, • Dynamic, high-tech environment with strong industrial impact, • Professional development opportunities and continuous training, • Commitment to flexible working arrangements, • Diversity and inclusion, • Stability of permanent employment Responsabilidades, • Deliver cost, quality, and on‑time performance for production lines, • Lead all fabrication operations in production, • Gather and analyze technical and financial data, • Lead Health & Safety routines on assembly lines, • Identify future production resource needs including space and subcontracting, • Drive improvement initiatives and determine outsourcing tasks, • Coordinate with technical, operational, and business teams for strategic alignment, • Implement operational gates strategy and manage plant routines (MPS, Go meetings), • Develop and maintain detailed planning of plant activities, • Coordinate internal stakeholders (quality, logistics, safety, planning), • Support New Program Proposals (BIDs) and define resources for new programs, • Propose layout, production flow and efficiency improvements; oversee new industrial means implementation Requisitos principales, • Degree in Industrial, Mechanical, Aerospace Engineering or similar, • Experience in plant management, industrial projects, or strategic planning (preferred), • Knowledge of production processes, investment planning, and subcontracting, • Strong communication, leadership, and strategic thinking skills, • Health & Safety focus, • leadership, • strong communication, • strategic thinking, • production processes, • investment planning, • subcontracting

Overview In this role you contribute to the Electrical Standardization activities for ADS programmes, ensuring standards alignment across design, production, and lifecycle. You will work with cross‑site teams to qualify and manage electrical standard parts, while driving standardisation digitalization and continuous improvement. The position offers international collaboration, possible travel for project work, and a chance to shape the standard parts landscape within a trusted, dynamic environment. Compensaciones / Beneficios • flexible working arrangements, • permanent contract, • full-time role, • international collaboration opportunities, • travel opportunities Responsabilidades, • Manage Standards Selection Lists, release and maintain technical standards, and validate external standards for electrical standard parts in ADS programmes, • Support qualification of electrical standard parts and manage related documentation (Qualification Test Plans, Qualification Test Reports, Qualified Product List), • Support supplier selection and supplier qualification; assist internal and external audits, • Provide standardisation support across Design, Procurement, Manufacturing and Services for the aircraft life cycle (new standard parts, standard queries, non-conformances resolution, obsolescence topics), • Contribute to standardisation digitalization of standards, materials tables, Surface Protections, etc., • Participate in project standardisation WGs and/or MFTs (travel may be required), • Maintain awareness of compliance risks and uphold integrity as a foundation for success and sustainable growth Requisitos principales, • Degree level in Aeronautical or Industrial Engineering (or equivalent), • Advanced English and Spanish, • Experience in electrical design or manufacturing engineering, • Ability to work in international teams, • Strong interpersonal and communication skills and team spirit, • Background in AGILE ways-of-working, • Commitment to integrity and compliance, • Interpersonal skills, • Teamwork spirit, • Strong communication, • Proactive problem solving, • Adaptability, • Electrical design or manufacturing engineering

Overview As a Manufacturing Engineer in the Harness/Electrical/Electronics space, you will lead end-to-end harness manufacturing and integration, optimizing time and cost while meeting project requirements and standards. You collaborate with engineering domains to ensure feasible designs and industrialization. You will define manufacturing processes, bills of materials, and integration plans, while supporting bid planning and shopfloor execution. The role emphasizes LEAN methods, modularization, and eco-efficiency in a space manufacturing setting. You will work across sites and with partners to deliver flight-relevant assemblies and campaigns. Compensaciones / Beneficios • flexible working arrangements, • equal opportunities Responsabilidades, • Validate design feasibility with engineering during development to ensure industrial compatibility, • Develop and maintain the Manufacturing Dossier with work instructions, data and test documents, • Analyze and optimize manufacturing technologies and capabilities across Space Spain Plant and partners, • Define Material & Process selections and ensure alignment with project execution, • Define Manufacturing BOM and interface with Supply Chain for material availability, • Contribute to bid phase through industrial planning, cost and schedule inputs, • Provide inputs to industrial planning including line balance, process times, and lead times, • Support production on breadboards, qualification and flight models, including on-site assistance, • Create process definitions in concurrence with Engineering and Mechanical Design Office, • Characterize work sequences, industrial parameters per Airbus OES guidelines, and identify tooling needs, • Integrate quality inputs (Control Plan) and PFMEA considerations into production, • Schedule delivery rates, optimize resources, and consider economic aspects, • Lead work preparation and release manufacturing procedures into work orders, • Foster feedback with Production & Quality teams and support CapEx planning when relevant, • Develop and deploy capabilities for new products/processes and support qualification campaigns, • Participate in SQCDP and shopfloor meetings, supporting recovery plans and scheduling, • Support AIT activities and participate in on-site campaigns or supplier facilities as needed Requisitos principales, • Aerospace electrical/electronic/system engineering background, • Experience in electrical harness manufacturing or related space industry processes, • 3-5 years in production/manufacturing engineering with space product relevance, • Ability to interpret documentation and produce clear instructions, • Knowledge of ECSS, ESCC, MIL standards within aerospace, • MS Office proficiency, especially Excel, • Understanding of electrical engineering and systems, • Desirable: CATIA Electrical Module, VBA/Google Apps Script programming, Windchill, SAP, • Willingness to work offsite for defined periods on short notice, • Strong teamwork, communication, planning, and adaptability, • team working, • process and quality driven, • high attention to detail, • Electrical harness manufacturing, • ECSS/ESCC/MIL standards, • MS Excel and MS Office

Overview In this role you lead the Manufacturing Engineering team within Spacecraft Production & AIT Spain, driving engineering activities for the AIT area. You will co-engineer industrial plans with Design Offices to deliver high-precision, low-tolerance spacecraft assemblies for EOS, EOS and TNS programs within strict clean-room protocols. You’ll manage cost and schedule targets, enable continuous improvement, and collaborate with cross-functional teams to support bids and program execution. This is a hands-on leadership role in a highly technical, safety-conscious environment with a focus on impactful, space-grade manufacturing. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion policy, • permanent contract, • opportunities to work on EOS and TNS programs, • cross-functional collaboration, • safety-focused environment Responsabilidades, • Lead and develop the ME production team to meet schedule, quality, cost, and safety targets, • Deliver complete Manufacturing Dossiers (planning, MBOM, assembly procedures, times, and specs) for new programs in AIT using the DDMS toolset, • Provide industrial plans and accurate ME NRC/RC cost estimates to support bidding and offers, • Coordinate with EOS and TNS stakeholders and with Program Business Lines, AIT, Environmental Testing, and mechanical/ RF/ electrical leads, • Maintain adherence to cost targets and EAC budgets with Program Managers and Finance controllers, • Drive continuous improvement and innovation in the AIT area while complying with standards Requisitos principales, • Proven ME experience in space sector or high-precision environments and prior leadership of engineering teams, • Experience in Assembly, Integration and Test (AIT) within space or high-precision environments, • Strong leadership, stakeholder coordination, and communication skills, • Advanced English and Spanish written and spoken proficiency, • Deep knowledge of spacecraft manufacturing domains (thermo-mechanical assembly, electrical hardware integration, test setup, satellite final integration) and clean-room standards, • Knowledge of special processes, laser/DEA optical alignment, tolerance stack-up, MGSE/containers, • leadership, • team management, • stakeholder coordination, • spacecraft manufacturing domains, • thermo-mechanical assembly, • electrical hardware integration

Overview As an Electrical System Installation Design Engineer, you will shape the installation of electrical systems for aircraft, from architecture through detailed design to manufacturing support and in-service activities. You will collaborate across interfaces and departments, adapting to evolving design processes and regulatory requirements. You will work on critical-path electrical installations, delivering robust, compliant solutions in a dynamic aerospace environment. Join a mission-driven team focused on safe, efficient and scalable aircraft systems. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion, • equal opportunities Responsabilidades, • Design and validate electrical harnesses and equipment installations across architecture, detailed design, manufacturing support and in-service phases, • Manage cross-department interfaces and ensure regulatory compliance and best practices, • Adapt to evolving electrical design processes and tools while facing new challenges, • Support aircraft development and manufacturing cycles, maintaining flexibility to changes during design, manufacture and operation, • Propose improvements and new ideas to enhance electrical system integration Requisitos principales, • 5+ years of engineering experience in design/engineering, • Degree in Aeronautical or Industrial Engineering or related discipline, • Strong interpersonal and communication skills, • High adaptability to new topics and networked work, • Proficiency in English and Spanish; German or French an asset, • Awareness of compliance risks and commitment to integrity, • strong interpersonal skills, • communication, • adaptability, • electrical system installation design, • design validation of electrical harnesses, • interface management across departments

Overview As an Electrical System Installation Design Engineer, you will shape the installation of electrical systems for aircraft, from architecture through detailed design to manufacturing support and in-service activities. You will collaborate across interfaces and departments, adapting to evolving design processes and regulatory requirements. You will work on critical-path electrical installations, delivering robust, compliant solutions in a dynamic aerospace environment. Join a mission-driven team focused on safe, efficient and scalable aircraft systems. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion, • equal opportunities Responsabilidades, • Design and validate electrical harnesses and equipment installations across architecture, detailed design, manufacturing support and in-service phases, • Manage cross-department interfaces and ensure regulatory compliance and best practices, • Adapt to evolving electrical design processes and tools while facing new challenges, • Support aircraft development and manufacturing cycles, maintaining flexibility to changes during design, manufacture and operation, • Propose improvements and new ideas to enhance electrical system integration Requisitos principales, • 5+ years of engineering experience in design/engineering, • Degree in Aeronautical or Industrial Engineering or related discipline, • Strong interpersonal and communication skills, • High adaptability to new topics and networked work, • Proficiency in English and Spanish; German or French an asset, • Awareness of compliance risks and commitment to integrity, • strong interpersonal skills, • communication, • adaptability, • electrical system installation design, • design validation of electrical harnesses, • interface management across departments

Overview In this role you will help shape powerplant control system architectures and integrate legacy and new systems. You will work closely with cross-functional teams to translate customer needs into robust solutions, supporting both Lab and Flight campaigns. You’ll design, validate, and test control systems, and contribute to reusable testing platforms while embracing modular, flexible, and independent design. This position offers exposure to cutting-edge aerospace technologies and a path to grow within a multiculturally driven environment. Compensaciones / Beneficios • Vacation days and additional days off, • Hybrid working model, • Health insurance, • Employee stock options, • Retirement plan, • On-site facilities (canteen, medical office) Responsabilidades, • Propose and shaping future control system architectures, • Identify customer needs and propose optimal solutions, • Design and integrate powerplant control systems (new and legacy), • Validate new design solutions and develop testing platforms, • Coordinate cross-functional activities with engine manufacturers, • Analyze qualification and verification documents for proper system integration, • Support A/C test campaigns (Labs/Ground) as Design Office liaison, • Pursue ongoing professional development with expert-guided training Requisitos principales, • Degree in Aeronautical Engineering (or related), • Teamwork and problem-solving mindset, • Experience in design and development of control systems for complex aerospace applications, • Experience with system testing campaigns, • Solid knowledge of software development, control theory, PLC programming, microcontrollers, and communication buses (ARINC 429, MIL-STD-1553, CAN, AFDX), • Experience with maintenance concepts and ARINC 615A/665 dataloading, • Experience with modeling/simulation tools (MATLAB/Simulink), • Familiarity with aerospace safety standards (DO-178C, DO-254, CS25, CS23), • Ability to work independently and in team, • Excellent Spanish and English communication skills, • teamwork, • problem-solving, • effective communication, • control systems design and development, • system testing campaigns, • MATLAB/Simulink

Overview In this role you lead the Manufacturing Engineering team within Spacecraft Production & AIT Spain, driving engineering activities for the AIT area. You will co-engineer industrial plans with Design Offices to deliver high-precision, low-tolerance spacecraft assemblies for EOS, EOS and TNS programs within strict clean-room protocols. You’ll manage cost and schedule targets, enable continuous improvement, and collaborate with cross-functional teams to support bids and program execution. This is a hands-on leadership role in a highly technical, safety-conscious environment with a focus on impactful, space-grade manufacturing. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion policy, • permanent contract, • opportunities to work on EOS and TNS programs, • cross-functional collaboration, • safety-focused environment Responsabilidades, • Lead and develop the ME production team to meet schedule, quality, cost, and safety targets, • Deliver complete Manufacturing Dossiers (planning, MBOM, assembly procedures, times, and specs) for new programs in AIT using the DDMS toolset, • Provide industrial plans and accurate ME NRC/RC cost estimates to support bidding and offers, • Coordinate with EOS and TNS stakeholders and with Program Business Lines, AIT, Environmental Testing, and mechanical/ RF/ electrical leads, • Maintain adherence to cost targets and EAC budgets with Program Managers and Finance controllers, • Drive continuous improvement and innovation in the AIT area while complying with standards Requisitos principales, • Proven ME experience in space sector or high-precision environments and prior leadership of engineering teams, • Experience in Assembly, Integration and Test (AIT) within space or high-precision environments, • Strong leadership, stakeholder coordination, and communication skills, • Advanced English and Spanish written and spoken proficiency, • Deep knowledge of spacecraft manufacturing domains (thermo-mechanical assembly, electrical hardware integration, test setup, satellite final integration) and clean-room standards, • Knowledge of special processes, laser/DEA optical alignment, tolerance stack-up, MGSE/containers, • leadership, • team management, • stakeholder coordination, • spacecraft manufacturing domains, • thermo-mechanical assembly, • electrical hardware integration

Acceso a nuestro Plan de Retribución flexible Arghos (Seguro Médico, Ayuda Comida, Ayuda Transporte, Ticket Guarderia) Requisitos: Experiencia en diseño de integración de sistemas eléctricos (muy valorable si se posee experiencia en entorno Airbus) Buen manejo de Catia * Deseable experienci

Overview As a Commodity Manager in strategic procurement, you drive the strategy and governance for sub-commodities within Navigation and Surveillance. You will lead cross-functional teams to secure cost-effective materials and services, manage supplier relationships, and optimize value and risk across programs. The role combines market insight, tendering and contract execution with a focus on profitability and sustainable supplier partnerships. You will work in a dynamic, globally connected procurement function that supports Airbus Defence and Space AirPower platforms. Compensaciones / Beneficios • flexible working arrangements Responsabilidades, • Establish, implement & monitor a Sub-Commodity strategy for your perimeter, • Manage supplier relationships and supplier-related development programs, • Lead the (Sub-) Commodity Multi-Functional Team, • Lead and drive to conclusion bids, tenders and supplier selection processes, • Lead and contribute to Procurement/Value Creation projects & initiatives to deliver synergies and savings, • Lead negotiations with suppliers to meet program expectations, • Set-up, negotiate and manage contractual agreements with suppliers, • Lead Supplier Evaluation Development (SED) and Vendor Management Requisitos principales, • Degree in Engineering, Business Management or equivalent (5+ years in procurement, engineering, services or project management), • Excellent negotiation skills with the ability to persuade and influence, • Experience in a matrix environment with proven stakeholder management, • Ability to anticipate, assess and mitigate risks, • Strong relationship building, team building, empowerment, motivation and conflict management, • Negotiation level of English, • Knowledge of SAP (asset), • negotiation, • stakeholder management, • relationship building, • SAP, • procurement and contract management, • supplier evaluation and vendor management

Overview In this role you will integrate and support the design, manufacture, and maintenance of laboratory test means used across defense and space programs. You will work within a multidisciplinary, cross-site team to address technical challenges, adapt to project priorities, and keep schedules and quality under control. You’ll collaborate with external partners, lead HW/SW integration for test benches, and contribute to bench validation and acceptance activities. This is a hands-on position with opportunities to work on diverse aircraft systems and to travel on transnational programs. Compensaciones / Beneficios • flexible working arrangements, • diverse and multi-skilled team, • opportunities to travel Responsabilidades, • Electrical/electronic design of test benches from System Architecture, • Interface with partners and suppliers and communicate in design reviews, test reports, and follow-up meetings, • Problem solving and Change Request implementation, • Hardware/Software integration for test benches, • Test facilities management and maintenance, • On-site acceptance tests with customers, • Contribute to test bench validation activities, • Support cross-program configuration control and cross-functional procedures Requisitos principales, • Degree in Aeronautical, Telecommunications, Automation or Electronics Engineering or equivalent, • Knowledge and high experience in Autocad, Altium designer or other electrical/electronic tools, • Ability to accept delegation, • Problem solving and decision making, • Open minded and proactive to new challenges, • Committed to personal development and learning new skills, • Good knowledge of avionic systems; experience with mission systems, data links, or sensors is a plus, • Interest in complex systems and continuous learning in test and systems engineering, • Experience in software testing is beneficial, • Eligibility for security clearance by relevant authorities, • Fluent in written and spoken English (B2 or higher), • Problem solving, • Decision making, • Team dynamic and proactive attitude, • Autocad, • Altium Designer, • HW/SW integration for test benches

Overview In this role you support the manufacturing and in-service support of Airbus aircraft by generating and analyzing aerodynamic data for loads, handling qualities, and performance. You participate in wind tunnel and flight test campaigns within Flight Physics to deliver robust aerodynamic models. You will collaborate with cross-functional teams to provide optimized data solutions on time, cost, and quality. This position offers the chance to shape data-driven aerodynamic decisions at a multinational aerospace leader. Compensaciones / Beneficios • flexible working arrangements, • inclusive working environment, • multinational, collaborative setting Responsabilidades, • Post-process and analyze aerodynamic data to build models for performance, loads, and handling qualities in steady and unsteady regimes, • Plan, attend, and interpret wind tunnel test results, • Prepare for Flight Tests, monitor telemetry, and conduct data analysis, • Deliver optimized aerodynamic data to customers adhering to TCQ constraints Requisitos principales, • Master’s degree or PhD in Aerospace Engineering or related field, • Minimum 5 years in aerodynamic characterization within aerospace, • Strong experience with numerical aerodynamic prediction tools and building aerodynamic databases from experimental, flight test, and CFD data, • Proficiency in Python and Matlab is valuable, • Excellent problem-solving skills and ability to work in a multidisciplinary team, • Good English communication skills, • collaborative, • problem-solving, • clear communication, • numerical aerodynamic prediction tools, • aerodynamic database generation, • data analysis from experimental, flight test and CFD data

Overview In this role you will integrate and support the design, manufacture, and maintenance of laboratory test means used across defense and space programs. You will work within a multidisciplinary, cross-site team to address technical challenges, adapt to project priorities, and keep schedules and quality under control. You’ll collaborate with external partners, lead HW/SW integration for test benches, and contribute to bench validation and acceptance activities. This is a hands-on position with opportunities to work on diverse aircraft systems and to travel on transnational programs. Compensaciones / Beneficios • flexible working arrangements, • diverse and multi-skilled team, • opportunities to travel Responsabilidades, • Electrical/electronic design of test benches from System Architecture, • Interface with partners and suppliers and communicate in design reviews, test reports, and follow-up meetings, • Problem solving and Change Request implementation, • Hardware/Software integration for test benches, • Test facilities management and maintenance, • On-site acceptance tests with customers, • Contribute to test bench validation activities, • Support cross-program configuration control and cross-functional procedures Requisitos principales, • Degree in Aeronautical, Telecommunications, Automation or Electronics Engineering or equivalent, • Knowledge and high experience in Autocad, Altium designer or other electrical/electronic tools, • Ability to accept delegation, • Problem solving and decision making, • Open minded and proactive to new challenges, • Committed to personal development and learning new skills, • Good knowledge of avionic systems; experience with mission systems, data links, or sensors is a plus, • Interest in complex systems and continuous learning in test and systems engineering, • Experience in software testing is beneficial, • Eligibility for security clearance by relevant authorities, • Fluent in written and spoken English (B2 or higher), • Problem solving, • Decision making, • Team dynamic and proactive attitude, • Autocad, • Altium Designer, • HW/SW integration for test benches

Overview As Aircraft Performance Engineer you join the Aircraft Performance team to own performance deliverables across AD&S fixed-wing programs. You will support design phases, certification processes and performance studies for campaigns, RFPs and in-service needs. You drive harmonization of tools, data management and service offerings while shaping the Flight Physics strategy. You work with cross-functional stakeholders to ensure quality, digitalisation and operational excellence in a dynamic aerospace environment. Compensaciones / Beneficios • flexible working arrangements Responsabilidades, • Own aircraft performance activities for current, future and R&D programs including certification interactions, • Support design phases for new programs and derivatives, • Conduct performance studies for campaigns, RFPs and customer inquiries, • Assist flight operations tooling, data management and in-service support, • Support flight data analysis for development, certification and investigations, • Develop roadmaps for tool harmonization, data management and service marketing, • Implement Flight Physics strategy and grow the service portfolio, • Ensure high-quality, clear technical dossiers and presentations, • Drive digitalization and technology roadmaps while delivering R&D and program needs, • Contribute to team/program transversal activities and continuous improvement, • Communicate effectively with internal and external customers and manage expectations Requisitos principales, • Master in Aeronautical Engineering, • 3-5 years of experience in Aircraft Performance (development, flight test and certification), • Willingness to roll-up sleeves and do what is necessary; owner mentality, • Ability to think strategically and execute methodically, • Ability to work under pressure, • Able to travel as required, • English negotiation level; German/Spanish preferred, • strong communication and collaboration, • conflict management, • customer focus, • Aircraft Performance analysis, • development, flight test and certification experience, • data analysis and interpretation

Overview In this role you contribute to the Electrical Standardization activities for ADS programmes, ensuring standards alignment across design, production, and lifecycle. You will work with cross‑site teams to qualify and manage electrical standard parts, while driving standardisation digitalization and continuous improvement. The position offers international collaboration, possible travel for project work, and a chance to shape the standard parts landscape within a trusted, dynamic environment. Compensaciones / Beneficios • flexible working arrangements, • permanent contract, • full-time role, • international collaboration opportunities, • travel opportunities Responsabilidades, • Manage Standards Selection Lists, release and maintain technical standards, and validate external standards for electrical standard parts in ADS programmes, • Support qualification of electrical standard parts and manage related documentation (Qualification Test Plans, Qualification Test Reports, Qualified Product List), • Support supplier selection and supplier qualification; assist internal and external audits, • Provide standardisation support across Design, Procurement, Manufacturing and Services for the aircraft life cycle (new standard parts, standard queries, non-conformances resolution, obsolescence topics), • Contribute to standardisation digitalization of standards, materials tables, Surface Protections, etc., • Participate in project standardisation WGs and/or MFTs (travel may be required), • Maintain awareness of compliance risks and uphold integrity as a foundation for success and sustainable growth Requisitos principales, • Degree level in Aeronautical or Industrial Engineering (or equivalent), • Advanced English and Spanish, • Experience in electrical design or manufacturing engineering, • Ability to work in international teams, • Strong interpersonal and communication skills and team spirit, • Background in AGILE ways-of-working, • Commitment to integrity and compliance, • Interpersonal skills, • Teamwork spirit, • Strong communication, • Proactive problem solving, • Adaptability, • Electrical design or manufacturing engineering

• Vacation days and additional days-off along the year (+35 days off in total), • Attractive salary and compensation package, • Hybrid model of working when possible, promoting the work-life balance, • Collective transport service in some sites, • Benefits such as health insurance, employee stock options, retirement plan..., • On-site facilities (among others): free canteen, kindergarten, medical office, • Possibility to collaborate in different social and corporate social responsibility initiatives, • Excellent upskilling opportunities and great development prospects in a multicultural environment, • Special rates in products & benefits Airbus is a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world. With around 130,000 employees and as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry, connecting people and places via air and space. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Within the MIS Develop. / Maintenance ED & FCAS (TASDM4) department of Airbus Defence & Space GmbH in Getafe, we specialize in IT solutions designed to guarantee airworthiness for airborne weapon systems, thereby enabling safe operations in operational and technical/logistical areas. Our years of experience in operating and supporting these systems for a wide range of internal and external customers and platforms drove the development of the modular and platform-independent ground support system MOSS (Maintenance and Operation Support Solution). In its first stage of expansion, MOSS is designed to continue ensuring the operation, repair, and aircraft maintenance of the Eurofighter. With the recently launched European development project, the Eurodrone (MALE RPAS), MOSS must be extended to a new product that incorporates new requirements and current technologies titeled RLMIS (RPAS Logistic Management Information System). If you want to take on this great challenge – join us. To strengthen our team, we are looking for a Systems Engineer for MMD HW&SW Specification, Development Coordination and Integration. The core responsibility of this position is to support the department in the specification of the MMD and the RLMIS owned MMD SW Components, with a specific focus on MALE RPAS-specific software modules and their integration into the overall system. Your main tasks and responsibilities include: Installation and Administration of the Getafe Laboratory which includes: Installation and administration of Linux environments including RedHat Enterprise Linux Configuration of Server Client Networks including DNS, DHCP, NFS, Identification & Authentification, Security Hardening Virtualization technologies like VirtualBox, Proxmox, Hyper-V including installation and deployment. Docker/Podman technologies including deployment, management, installation... MMD integration Multi-Layer Software integration on MMD Hardware using technologies like: API Rest, web sockets and OpenApi applications Public Key infrastructure & Certificates Management RHEL Identity and Access Management tools Privileged Access Management (PAM) Single Sign-On and Federation technologies Provide technical leadership and guidance towards supplier, ensuring adherence to architectural principles and best practices Conduct performance analysis, capacity planning and troubleshooting Ensure compliance with security policies, regulatory requirements and industry standards. Ensure effective integration of lessons learnt. Support external SW Development Teams by: Point-of-Contact for technical discussions Support evolution of requirements and reviews of Supplier deliverables Support integration and testing activities on Supplier and Industry side You possess the following knowledge and qualifications: Completed degree in Computer Science or a comparable field of study with a focus on Computer Science. At least 5 years of relevant professional experience. 5 years of proven experience in IT Administration 5 years of proven experience in SW integration in Linux environments, preferred RHEL Extensive knowledge and experience in planning and executing software and system tests for complex software systems. A passion for working in a quality-conscious and agile team environment. Proficiency in both German and English (written and spoken). Confident demeanor, strong teamwork skills, initiative, and flexibility. Familiarity with the following tools would be an advantage: Tool based interface design using ICDMS and DOORS Experience in Project Management. Experience in Supplier Management Proficiency in the Microsoft product suite (Windows, Office, etc.). Knowledge of DOORS and CAMEO is desirable. Linux Operating System, preferred RHEL (RedHat Enterprise Linux) Virtualization and containerization technologies like VirtualBox, Proxmox, Hyper-V, Docker or Podman The following skills would be a plus: Knowledge of Eurofighter and/or A400M ground support and maintenance information systems is desirable. Knowledge of the processes and procedures of an aviation unit (flying unit) in the areas of operation, maintenance, and repair is desirable. Knowledge of airworthiness requirements for airborne systems is desirable. This role requires an awareness of potential compliance risks and a commitment to ethical behavior. Both are fundamental prerequisites for the success, reputation, and sustainable growth of the company. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Customer Account and Service Management #J-18808-Ljbffr

Job Description: The successful applicant will join the Engineering Controlling Team (TFAOE) in Getafe. You will be responsible for the planning, controlling and steering of the Engineering contribution to the Airbus Derivatives (MRTT) projects. The jobholder acts as a Business Partner of the Chief Engineering organisation, supporting in all financial aspects across the life cycle of a Project, from the bidding to the execution, along with EAC and day-to-day requests. Your main tasks and responsibilities will include: • Manages targets set by programs through convergence process, • Cascade the targets at the correct level of granularity to steer the business properly (Org Area, Personnel hours/Subco./Material, etc.);, • Secure adherence of actual costs with the target during the execution phase. Provide transparent reporting per programme level, • Deliver high quality timely financial reports, and ensuring that these reports: Provide meaningful information regarding status vs targets; Provide visibility on the different types of delta, with a special focus on deltas coming from activities out of EAC scope' (late modifications, extraordinary developments, certifications, etc); Are harmonized and ensure consistency, including in the generation process, • Analyze quantitative and qualitative data on performance against budgets/targets highlighting discrepancies and risks & opportunities, ensuring early identification of deviation from financial plan and orientate recovery measures for implementation, • Support to workload planning cycles as per central Finance requirements, with a particular focus on: Secure consistency across planning cycles (e.g. EAC) and programme directives and assumptions Secure convergence and alignment with Programme (incl. programme finance) Validate Submission / secure financial affordability of Workload vs Programme funding • Enhance implementation and usage of financial tools (e.g. CMA, SimpliFi, UP) to achieve more efficient controlling; taking care of operational toolset already in place (e.g. myWorkload), • Further develop Business Partnering to the Chief Engineers, • Bachelor degree in Finance, Business Management or equivalent, • Previous years of experience in Function or Project/Program Controlling, • Financially aware with high business partnering acumen, • Experience in engineering environment is an advantage, • Microsoft Office and Google workspace and tools, esp. Excel, Sheets, • Spanish and English to negotiation level, • Strong analytical skills and problem solving approach, • Proactive and independent working style, • Critical thinking & ability to constructively challenge the operational business, • Strong interpersonal and communication skills, • Excellent team working skills; willingness to work in a transnational environment, • Interest for IT topics and automation, knowledge of reporting tools would be a plus At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Collective transport service in some sites. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. WANT TO KNOW MORE ABOUT US? #AirbusDiversity Airbus is a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world. With around 130,000 employees and as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry, connecting people and places via air and space. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Airbus Defence and Space SAU Agency / Temporary Professional Controlling By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #J-18808-Ljbffr

An opportunity for a Data Analyst has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join our Data & Analytics Team, acting as a key interface between business functions, our data ecosystem, and requested solutions. The team is multidisciplinary and focused on driving a data-driven mindset across the organization. The jobholder will reinforce our capabilities in transforming large datasets into strategic assets, collaborating closely with various departments to understand their needs, deliver actionable insights, and ensure top-tier data governance in our complex defense and space programs. • Perform end-to-end data processing, from gathering relevant data from various internal and external sources to cleaning and processing raw data to ensure the highest data quality., • Apply advanced statistical and analytical techniques to extract meaningful insights, draw accurate conclusions from data, and prevent biases in decision-making., • Design and deliver high-impact data visualizations, charts, and dashboards to communicate findings effectively through clear storytelling, while advising users on best practices., • Prepare and present comprehensive reports to share key insights with stakeholders and support informed, data-driven business decisions., • Manage and maintain analytical tools and software ecosystem for data analysis, ensuring data security, privacy, and full compliance with internal requirements and external regulations., • Foster a data-driven mindset by coaching business functions, collaborating with other teams, and actively sharing best practices and techniques with the wider Airbus data community. Is your profile aligned to the following list of skills? • Education: Degree in Mathematics, Statistics, Computer Science, Engineering, or a related quantitative discipline., • Experience: Proven experience in data analysis, data preparation, and working with complex datasets., • Technical knowledge:, • Strong command of statistics and probability concepts (e.g., hypothesis testing, Monte Carlo simulations, expected values, standard errors, Central Limit Theorem, confidence intervals)., • Proficiency in data analysis and visualization tools (e.g., Python/R, SQL, Tableau, PowerBI, QlikSense, or similar software)., • Soft skills: Excellent communication and storytelling skills, high adaptability to work in a networking mode, coaching mindset, and ability to act as a bridge between technical and non-technical teams., • Languages: Advanced level in English., • Valuable / Nice to have: Experience within the aerospace, defense, or industrial manufacturing sectors; knowledge of big data technologies or advanced machine learning models., • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible., • Collective transport service subject to working calendar/home location., • Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environ ment., • Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Airbus Defence and Space SAU Permanent Professional Digital By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #YESPOST #J-18808-Ljbffr

Job Description: New positions has arisen as an A400M MRO Network maintenance B1 or/and B2 technician has arisen within Airbus Defence & Space. This position is based at Zaragoza (Spain) Military Air Base, and as such you must be available to work full time in this place. Working as part of an Airbus D&S Resident Team within the A400M MRO Network, will include the performance and certification of these tasks, including supervision and certification of unlicensed mechanics tasks. This service will take place at the mentioned Main Operating Base of the customer. This position will require a security clearance or will require being eligible for clearance by the recognized authorities. RESPONSIBILITIES Your main tasks and responsibilities will include: Be responsible for performing and certification of both scheduled and unscheduled tasks previously agreed with the customer by Customer Services. SB implementation: modifications not performed at FAL or appearing after the delivery of the A/C, and from support asked by the Customer for different kind of repairs or maintenance tasks. Manage small groups of non-licensed mechanics in the performance of maintenance activities and coordination and supervision their OJT, if needed Be involved in the setting up of working processes and practices. Be involved in all aspects of technical support of a new advanced military transport aircraft. SKILLS EASA or EMAR Part 66 license. Theoretical training without basic 3 years experience would be also valid under particular circumstances. Type rating included will be a plus Experienced working according SB and AMM documentation Experience in MRO on a modern digital aircraft: A380, A350 etc. Strong interpersonal and communication skills. Independent user in English and Spanish WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Special rates in products & benefits. #LMA * This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Production means/Maintenance By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

ESP Solutions Group es el holding líder en transporte sostenible y logística internacional, con sede en Ceutí (Murcia), España, y una flota compuesta por 1.500 tractoras. La compañía está especializada en el transporte terrestre europeo de productos perecederos, principalmente frutas y hortalizas, así como en productos farmacéuticos como vacunas, insulina y reactivos biológicos, además de mercancía de alto valor. Según datos del portal especializado Alimarket, el grupo se posiciona actualmente como la cuarta empresa de transporte en Europa por volumen de facturación. Durante el último año, ESP Solutions Group ha experimentado una transformación significativa, pasando de ser una agencia a convertirse en una compañía verticalmente integrada que emplea a cerca de 2.000 profesionales. El grupo continúa consolidando su liderazgo en el sector logístico gracias a una firme apuesta por la innovación, la sostenibilidad y la excelencia en el servicio. En ESP Solutions, somos plenamente conscientes de que el talento es clave para alcanzar nuestros objetivos. Por ello, apostamos por personas proactivas, comprometidas y con ambición de crecimiento, que deseen formar parte de una empresa con proyección internacional. Ubicación Madrid Tipo de contrato Indefinido a jornada completa Horario Horario flexible • Contrato indefinido, • Incorporación a una empresa en constante evolución y crecimiento, • Proyección de carrera dentro de la empresa, • Horario flexible, • Supervisar y gestionar los flujos de efectivo del grupo., • Elaborar y monitorear previsiones de flujo de caja a corto, medio y largo plazo., • Supervisar las necesidades de financiación., • Gestionar la relación diaria con las entidades bancarias y negociar las condiciones de productos financieros., • Revisar y controlar los costes financieros, optimizando las condiciones bancarias y minimizando comisiones., • Supervisar el uso adecuado de productos financieros como factoring, confirming, y leasing, entre otros., • Gestionar el sistema de cash pooling entre las distintas empresas del grupo, asegurando la eficiente asignación de recursos., • Controlar el saldo de las cuentas bancarias y maximizar la rentabilidad de los excedentes de tesorería., • Identificar y gestionar riesgos asociados a la liquidez, tipos de cambio, tasas de interés y otras variables financieras que puedan afectar al grupo., • Implementar estrategias de cobertura de riesgos (hedging)., • Implementar sistemas de tesorería., • Asegurar el cumplimiento de la normativa financiera y legal aplicable., • Coordinar auditorías internas y externas relacionadas con la tesorería, y preparar los informes necesarios para las mismas., • Garantizar que todas las operaciones financieras y bancarias se ejecuten de acuerdo con las políticas internas del grupo., • Experiencia previa de al menos 3 años en en roles de tesorería., • Proactividad y ganas de crecer profesionalmente ¡Síguenos en LinkedIn! Comparte esta oferta espsolutions.eu #J-18808-Ljbffr

Inside of TADY’s CoC (Aircraft Systems Centre of Competence), Highly Integrated Systems (HIS) is a newly created organization (Domain) with specific responsibilities in Multisystem Architectures, Airborne Computing Platforms, IMA and Modular Integration, HW/SW Certification and Infrastructure and Digitalization, acting as Multisystem and IMA Design Office and providing transversal support and services to the whole System’s CoC. This organization has been created to evolve and prepare the CoC’s organization to the new challenges and paradigms in the Systems design, to attend current and future customer needs and to foster reuse, common strategies alignment, economy of scale, multisystem architectures and digitalization. The aim is to deliver cross-functional strategies, artefacts and support for the design, development and certification of Air Power systems by centralizing competencies, expertise and activities to act as Multisystem Design Office. • Automation Framework Development: Design, implement, and maintain a robust Python-based automation framework used across multiple programs and environments. This includes defining architecture patterns, reusable components, libraries, and ensuring consistency, scalability, and maintainability across all automation projects., • End-to-End Automation Lifecycle: Lead the full development lifecycle of automation solutions - from requirements gathering and design to implementation, testing, deployment, and release to the end customer., • Software Design & Architecture: Define and enforce software design principles, coding standards, and architectural patterns (e.g., modular, hexagonal, and event-driven architectures)., • Programming & Scripting: Develop high-quality, production-grade code primarily in Python , complemented by strong Shell scripting (Bash/PowerShell) skills for system-level automation., • Containerization & CI/CD Integration: Design and maintain Docker-based build environments and pipelines. Integrate automations into Jenkins CI/CD workflows , ensuring reliable build, test, and deployment processes., • Code Quality & Testing: Promote automated testing practices, including unit, integration, and regression testing. Implement continuous integration strategies to ensure code quality and early detection of issues., • Collaboration & Stakeholder Management: Work closely with internal customers and other DevOps teams to translate operational needs into software solutions., • Documentation & Standards: Ensure that all developed tools and automations are properly documented - including architectural decisions, API contracts, and deployment procedures - maintaining traceability and compliance with engineering standards., • Innovation & Continuous Improvement: Evaluate and integrate new technologies and methodologies to enhance the automation ecosystem., • Degree in Software Engineering, Computer Science, or similar , with relevant experience in software architecture and DevOps environments., • 3+ years of experience in software development and architecture, ideally in automation or tooling domains., • Advanced level of Python programming , including design patterns, object-oriented programming, and modular architectures., • Strong experience with Shell scripting (Bash or PowerShell) for automation and integration tasks., • Proficiency with Docker and containerized development environments., • Experience designing and maintaining CI/CD pipelines (preferably Jenkins)., • Solid understanding of software architecture patterns , API design , and versioning strategies ., • Strong focus on code quality , testing, and maintainability., • Excellent communication and stakeholder management skills, with a customer-oriented mindset., • Ability to work autonomously while aligning with team objectives and long-term vision., • English at negotiation level - German and/or French is a plus., • Experience in microservices architecture and event-driven systems ., • Knowledge of infrastructure automation tools (e.g., Ansible, Terraform) or orchestration platforms (e.g., Kubernetes)., • Familiarity with FastAPI , Flask , or similar Python backend frameworks., • Experience with Git-based workflows , code review processes , and semantic versioning ., • Knowledge of API integration (e.g., REST APIs, SOAP APIs, RPC, etc.)., • Experience with logging, monitoring , and telemetry tools for automation health tracking., • Exposure to domain-driven design (DDD) and hexagonal architecture principles., • Strong analytical and problem-solving mindset, focused on delivering durable, scalable solutions., • Vacation days and additional days-off along the year (+35 days off in total), • Attractive salary and compensation package, • Hybrid model of working when possible, promoting the work-life balance, • Collective transport service in some sites, • Benefits such as health insurance, employee stock options, retirement plan..., • On-site facilities (among others): free canteen, kindergarten, medical office, • Possibility to collaborate in different social and corporate social responsibility initiatives, • Excellent upskilling opportunities and great development prospects in a multicultural environment, • Special rates in products & benefits Airbus is a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world. With around 130,000 employees and as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry, connecting people and places via air and space. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Last but not least, the company has been awarded with the “Top Employers Spain 2025” certification and "Top Employers Europe 2025" by Top Employers Institute. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Airbus Defence and Space SAU Permanent Professional Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #J-18808-Ljbffr

About Highly Integrated Systems - TADYSAs part of the newly established About Highly Integrated Systems - TADYSAs part of the newly established Highly Integrated Systems (HIS) domain within Aircraft Systems Centre of Competence (CoC), you will join the Computing Platforms & Multisystems HW/SW Integration group (TADYS2). HIS is the Multisystem and IMA Design Office and Airborne Computing Platforms responsible and centralizes expertise and competencies for driving architectural reuse, strategic alignment, and economies of scale across the CoC. Within this framework, the TADYS2 subdomain focuses on the standardization of embedded software and computing platforms. As a Senior Software Platform Integration Engineer, you will spearhead the CoC’s computing platforms strategy, ensuring the delivery of robust, certifiable, and high-performance software artifacts for computing platforms and you will be dealing with the HW/SW integration for multi-systems architectures, essential for the next generation of AirPower systems. • Requirements & Design: Elicit and maintain Software Requirements Specifications (SRS) for onboard safety-critical computers. Design, develop, and perform Validation & Verification (V&V) of software artifacts in strict adherence to RTCA DO-178C (up to DAL-A)., • Platform Integration & Architecture: Lead the definition of full software platform architectures for multisystem computing platforms. This includes partitioning, scheduling, resource allocation, and the integration of third-party application and low-level software (RTOS BSPs, drivers, and middleware)., • Standardization & API Development: Drive the CoC strategy by providing common APIs and standardized access to platform support software (RTOS, BSP, low-level I/O, and middleware) to support various Design and Development Offices., • Architecture Evolution: Design and implement new capabilities for embeddable solutions, including secure mathematical functions, robust file system services, and time/logging services to support the communalization strategy., • Certification & Compliance: Share responsibility for the platform software certification process, interfacing with certification authorities to demonstrate compliance with RTCA DO-178C., • Technology Assessment & Bring-up: Support the CoC strategy by performing trade-off analyses, technical benchmarking, and rapid prototyping on reference boards. Collaborate in the evaluation and board bring-up of new target platforms, with a focus on multicore architectures. Technical Expertise : • Programming: Advanced proficiency in C for real-time embedded systems. Experience with GNU toolchains and modern/legacy compilers (GCC, Clang/LLVM, Diab)., • Computer Architecture: Strong background in ARM, PowerPC, or x86 and SoC architectures. Deep understanding of MMUs, caches, memory hierarchies, and pipelining., • Avionics & Protocols: Expert knowledge of avionics data buses, including legacy (ARINC-429, MIL-STD-1553B, CAN) and modern digital networks (AFDX, TSN), as well as analog/discrete I/O., • Peripherals & Interconnects: Extensive experience with low-speed peripherals (UART, SPI, I2C) and high-speed interconnects (PCIe) and DMA., • RTOS & ARINC-653: Advanced knowledge of safety-critical RTOS and the ARINC-653 specification. Hands-on experience with COTS solutions (e.g., Wind River VxWorks 653, PikeOS, Green Hills Integrity, or DEOS)., • Certification Standards: In-depth knowledge of RTCA DO-178C and RTCA DO-330., • Scripting & Data: Proficiency in Python for automation (CI/CD, hardware setup) and solid understanding of data serialization (JSON, XML)., • English: Professional negotiation level., • Embedded Linux: Experience in driver development and platform software for mission or safety-critical Linux systems., • Modeling: Familiarity with UML and hands-on experience with SysML tools (e.g., Cameo, IBM Rhapsody)., • Safety-Critical Analysis: Experience with static analysis tools (Polyspace, SciTools Understand) and structural code coverage tools (LDRA)., • Performance Profiling: Knowledge of Processor Performance Monitor Counters (PMC) and hardware event monitors, specifically regarding multicore resource contention and interference mitigations., • Methodologies: Experience working in Agile environments using Jira and Confluence., • Proactivity and high autonomy., • Strong analytical problem-solving mindset., • Ability to collaborate effectively in complex, cross-functional teams., • Vacation days plus additional days-off along the year, • Attractive salary., • Hybrid model of working when possible., • Collective transport service subject to working calendar/home location., • Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Option to access special rates in products & benefits. Airbus Defence and Space SAU Permanent Professional Software Engineering Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #YESPOST #J-18808-Ljbffr

Published offer: Jun 16, 2025 Come to Aernnova! You will find challenging projects, excellent professionals, and the chance to grow professionally and gain international experience. Ensure production within Aernnova’s area of responsibility at the customer’s facilities, meeting deadlines, costs, quality, safety, and customer satisfaction through effective team management, control of financial performance, and support for new proposals and business development. • Participate in the preparation of commercial proposals., • Manage negotiations and communication with the customer., • Lead, organize, and motivate multidisciplinary teams, including production, engineering, and quality., • Implement quality control measures and procedures., • Plan and oversee project activities., • Ensure compliance with occupational safety regulations., • Monitor and supervise material procurement and warehouse operations., • Identify and track potential risks., • Define and monitor annual goals and key performance indicators (KPIs)., • Prepare analytical income statements., • Control costs and identify opportunities for improvement and greater efficiency., • Contribute to the Management Committee., • Provide internal and external reports., • Technical Aeronautical Engineering or Bachelor's Degree in Aerospace Engineering.., • 2+ year of work experience in the functions detailed., • Ability to travel., • Fluency in English., • Capacity for management, motivation, and teamwork., • Leadership. Assertiveness, communication, and negotiation skills., • Analysis and synthesis capacity, prioritization, and decision-making., • Order and systematics. Results-oriented, • The benefits of a large company; Aernnova is the first Tier 1 in Spain and 10th worldwide., • Opportunities for learning and development in Aircraft Services., • Working in an advance technology and high knowledge aeronautical company., • Good work environment. Collaborative teamwork., • Flexible working conditions & remuneration according to experience and professional worth. By submitting your resume or application, you agree that Aernnova may use, store and process personal information and data about you in order to follow up and manage the process related to your application or future employment. Your personal data will be subject to Aernnova Group's Terms of Processing and Privacy Policy Privacy Policy - Aernnova Web and such information will only be used by Aernnova. Aernnova is firmly committed to contributing to the achievement of the Sustainable Development Goals through its ESG Action Plan. This plan focuses, among others, on the contribution towards a net zero aviation industry, the reduction of energy use, emissions and noise, actions aimed at respecting human rights and promoting safe and healthy work, as well as strong corporate governance. Along these lines, the Aernnova Group is committed to equal opportunities for all people as a fundamental pillar of professional and personal development. Therefore, we welcome all candidates regardless of race, sex, ideology, nationality, religion or any personal, physical or social condition. Join us to defend sustainable aviation, protect the planet and create a better future for all. Thank you very much for your interest in Aernnova. Regards Aernnova #J-18808-Ljbffr

Job Description:An opportunity for a Strategic Procurement Manager - Next Generation Composites has arisen within Airbus Operations , Getafe (Madrid) .The selected candidate will join the PMBC (Composites Strategic Procurement) Team, which is in charge of leading the Multi-Functional Team (MFT) for composite materials across the entire Airbus Group through the Procurement Synergy Group (PSG) . This team works in a highly transnational, cross-functional, and cross-divisional environment, collaborating closely with R&T, Engineering, Manufacturing, SC&Q, and major suppliers to define, develop, and secure the next generation of composite technologies that will directly impact future aircraft platforms and business decisions .RESPONSIBILITIESThe main tasks of the jobholder will be :Lead the creation and execution of the Composites Procurement Strategy (including Key Principles, Implementation Strategy, and Planning) in alignment with the Next Gen Programme Strategy .Coordinate the overall Procurement involvement for Next Generation Composite Materials, leading the Call for Tender activities and managing functional, cross-divisional teams .Establish and maintain the contractual framework for new composite developments (NDAs, Cooperation, and Research Agreements) with external suppliers .Monitor and secure suppliers’ involvement, performance, and adherence to Programme milestones, planning, and material deliveries for trials .Ensure Procurement's contribution to material trade-offs (evaluating cost, industrial capability, and sovereignty) and drive Risk & Opportunity Management .Consolidate inputs and deliver presentations to higher management at key decision-making forums and Programme gates .SKILLSIs your profile aligned to the following list of skills? Apply! We are looking forward to knowing you :Education: Degree in Engineering, Science (Chemistry, Physics, Mathematics, etc.), or Business Administration .Experience: Proven experience in Procurement, managing international suppliers, key contracts, and competitive bidding processes .Soft Skills: Functional leadership, excellent negotiation, communication, and coordination skills, with a high ability to structure complex data and work in a transnational networking mode .Languages: Advanced / Fluent level in English (C1/C2) .Technical Knowledge: Strong understanding of procurement frameworks, risk management, and strategic sourcing processes .Valuable / Nice to have: Knowledge of materials (specially composite technologies) and Project Management methodology will be highly valued .WHICH BENEFITS WILL YOU HAVE AS AN AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits :Vacation days plus additional days-off along the year .Attractive salary .Hybrid model of working when possible .Collective transport service subject to working calendar/home location .Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants .On-site facilities (among others): free canteen, kindergarten, medical office .Possibility to collaborate in different social and corporate social responsibility initiatives .Excellent upskilling opportunities and great development prospects in a multicultural environment .Option to access special rates in products & benefits .This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Operations SLEmployment Type:Permanent-Experience Level:ProfessionalJob Family:Sourcing, Buying and Ordering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #J-18808-Ljbffr

ALTEN es una compañía líder en consultoría tecnológica e ingeniería, presente en más de 30 países y con más de 57.000 profesionales en todo el mundo. En España, colaboramos con empresas y organismos públicos en el desarrollo de soluciones innovadoras que impulsan la transformación digital y la eficiencia operativa. Buscamos incorporar a un Senior Project Leader especializado en liderar proyectos estratégicos en el sector aeronáutico, coordinando equipos y asegurando la correcta ejecución técnica y operativa para unirse a nuestro equipo de Ingeniería dentro de la Dirección Técnica. En esta posición tendrás un rol estratégico en la gestión de proyectos industriales, asegurando la correcta ejecución y alineación con los objetivos del cliente. Tu día a día incluirá: • Liderar y coordinar equipos multidisciplinares, garantizando la eficiencia y el cumplimiento de plazos., • Reportar la actividad y el estado de calidad al cliente, actuando como interlocutor principal y asegurando la transparencia en cada fase del proyecto., • Definir y desarrollar KPIs, así como identificar y evaluar riesgos y oportunidades, anticipando desviaciones y proponiendo soluciones., • Gestionar la carga y capacidad de los equipos, optimizando recursos y asegurando la correcta planificación., • Detectar necesidades y proponer mejoras, impulsando la optimización de procesos y la mejora continua., • Liderar proyectos de ingeniería orientados a procesos y fabricación en el sector aeronáutico, asegurando la correcta implementación y coordinación de actividades en entornos industriales., • Coordinar equipos de ingeniería y técnicos especialistas, garantizando la correcta ejecución y alineación con los requisitos del cliente., • Actuar como punto de contacto principal con el cliente, facilitando la comunicación técnica y asegurando la satisfacción y la calidad de entrega., • Colaborar con otras áreas para garantizar el cumplimiento de los estándares del sector aeronáutico., • Impulsar la mejora continua y la optimización de procesos dentro del área de proyectos de telecomunicaciones., • Ingeniería Industrial, Aeronáutica, Mecánica o similar., • Mínimo 5 años de experiencia profesional, incluyendo experiencia como Team Leader y en entornos industriales., • Experiencia en Ingeniería de Procesos / Manufacturing Engineering, especialmente en proyectos relacionados con la fase posterior al diseño del avión., • Valorable nivel alto en inglés., • Incorporación a una multinacional referente en ingeniería y tecnología., • Modelo híbrido de trabajo y flexibilidad horaria., • Plan de desarrollo profesional personalizado y acceso a formación continua., • Entorno de trabajo dinámico, colaborativo y orientado a la innovación., • Ticket Restaurante, seguro de salud y programa de retribución flexible., • Participación en proyectos estratégicos de alto impacto tecnológico. Si tu perfil encaja con esta posición, envíanos tu candidatura. Nuestro equipo de Talent Acquisition and Development se pondrá en contacto contigo para contarte más sobre el proyecto y conocerte mejor. #J-18808-Ljbffr

Job Description:An opportunity for Service & Performance Manager – General Services has arisen in Getafe (Madrid)RESPONSABILITIESRestore the operational performance, KPI achievement, and contract compliance of the catering and vending services.Comprehensive management of Office Services in Getafe.Cross-functional support to other general services and FMRE Spain service lines.The goal is to ensure efficiency, cost control, excellence in the employee experience, and continuous improvement.Main ResponsibilitiesCatering & Vending - GetafeMonitoring and improvement of KPIs (quality, satisfaction, incidents, service times, etc.).Supervision of contractual compliance and SLAs with suppliers.Analysis of consumption data, trends, and optimization opportunities.Definition and implementation of continuous improvement plans.Budget management and cost control.Audit coordination.Action plan management.Adherence to applicable regulations and standards.Office Services – GetafeDaily operational management of general office services.Supplier coordination and contract monitoring.Budgetary control of the area.Supervision of proper service operation.Incident response and agile problem resolution.Cross-functional Support to General Services and other Service Lines - Waste, Cleaning & Landscaping, Transport, OthersSupport in monitoring supplier compliance.Reporting.Service audits.Participation in meetings.Implementation of control and monitoring tools.Definition and implementation of continuous improvement plans.Project leadership.SKILLSEducation: * Degree in Engineering or similar, EQF Level 7 (Master's level).Availability to travelUp to 3 years of experience in supplier management.Experience in KPI management and data analysis.Experience in vendor and contract management.Proficiency in Microsoft and Google analysis tools.Project management.Knowledge of SLAs and service contracts.Personal Skills:Results-oriented.Analytical skills.Negotiation skills.Proactivity and focus on continuous improvement.Ability to work cross-functionally and manage multiple stakeholders.English level B2 or higher.Valued Extras (Nice-to-have):Experience in medium/large industrial or corporate environments.Knowledge of sustainability applied to services (waste reduction, energy efficiency, etc.).WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a lookat some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Collective transport service in somesites. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporatesocial responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment.WANT TO KNOW MORE ABOUT US? #AirbusDiversity Airbus is a leader in designing, manufacturing and delivering aerospace products, services andsolutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world. With around 130,000 employeesand as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry,connecting people and places via air and space. At Airbus, we support you to work, connect and collaborate more easily and flexibly.Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Last but not least, the company has beenawarded with the “Top Employers Spain 2023” certification and "Top Employers Europe 2023" by Top Employers Institute.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Operations SLEmployment Type:Agency / Temporary-Experience Level:ProfessionalJob Family:Facility Management and Real Estate By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #J-18808-Ljbffr

¡Únete al equipo de SII Group Spain y ayúdanos a impulsar la transformación digital e innovación! Queremos incorporar a nuestro equipo un/a Manufacturing Engineering Junior para uno de nuestros proyectos de referencia dentro del sector seguridad digital. Si estás buscando nuevas oportunidades donde crecer profesionalmente, no dudes en aplicar a a esta oferta 🚀 Conocimientos, habilidades y experiencia requeridas: 🛠️ ¿Qué buscamos? • Titulación en Ingeniería Industrial, Mecánica, Aeroespacial o similar., • Experiencia previa como Ingeniero/a de Procesos, Manufacturing Engineer o Ingeniero/a de Industrialización., • Experiencia en entornos industriales., • Conocimientos de procesos de fabricación y montaje., • Capacidad para trabajar con documentación técnica y equipos multidisciplinares., • Nivel de inglés alto. ⭐ Se valorará especialmente • Experiencia en el sector aeronáutico., • Conocimientos de Manufacturing Engineering., • Experiencia en industrialización de producto., • Conocimientos de Lean Manufacturing y mejora continua., • Experiencia con herramientas PLM / ERP., • Conocimientos de herramientas de diseño y fabricación. ¿Quiénes somos? En SII Group, con más de 16.000 profesionales en 20 países, ofrecemos servicios de IT, Ingeniería y Consultoría que impulsan la transformación digital en múltiples industrias. Nos guiamos por los pilares estratégicos: Growth, People & ESG, manteniendo una cultura de confianza y excelencia reconocida por nuestro equipo con la certificación Great Place to Work. Let’s Tech Together Let’s Tech Together es nuestra promesa y filosofía. Nos atrevemos a innovar, a tomar la iniciativa y a construir un futuro tecnológico juntos. Valoramos la autonomía, la experimentación y la inclusión, creando un entorno donde cada idea cuenta y donde cada miembro del equipo puede crecer profesional y personalmente ¿Qué te ofrecemos? 24 días de vacaciones para que desconectes: 🏖️ Disfruta de un merecido descanso con 24 días hábiles de vacaciones, para que disfrutes de tiempo de calidad! Contrato indefinido: 📄 Contrato indefinido, brindándote seguridad y confianza en tu futuro profesional. Jornada intensiva todos los viernes y el mes de agosto: 🗓️ ¡Dale la bienvenida al fin de semana antes! Disfruta de jornadas intensivas los viernes y durante todo el mes de agosto para optimizar tu tiempo libre y equilibrar tu vida laboral." Retribución flexible: 💼 Te ofrecemos una retribución a la carta pudiendo elegir diferentes productos tales como seguro de salud, tickets de comida, transporte, guardería, plataformas de bienestar (WellHub), etc.. Metodología SmartWorking: 🌐 Nos adaptamos a tu estilo de vida con nuestra metodología SmartWorking, que fomenta la flexibilidad y el teletrabajo, permitiéndote alcanzar un equilibrio entre tu carrera y tus compromisos personales. Oficinas Wellbeing: 🎾☕ En nuestra sede de la Agencia West, contamos con instalaciones de bienestar de las que podrás disfrutar: gimnasio equipado, pista de pádel, rocódromo, clases individuales… Además, disponemos de Coffee Corner con café de especialidad para que puedas relajarte y disfrutar de tu pausa. IT&Engineering Academy: 🎓 Sigue creciendo con nosotros a través de nuestra IT&Engineering Academy, el campus de formación que SII Group Spain pone a tu disposición para que puedas seguir desarrollando nuevas competencias (Hard y Soft Skills), impulsando tu crecimiento profesional y personal. Además contamos con licencias de Coursera, formación AdHoc e idiomas. 📚 Oportunidad de aprender de grandes profesionales: 👨 🏫 Aprovecha la oportunidad de aprender de los mejores. Nuestros programas de coaching y mentoring te brindan la guía y el apoyo necesarios para alcanzar tu máximo potencial. Tenemos Convenios con distintas Asociaciones y Colegios de Ingenieros, brindándote la posibilidad de acceder a formaciones y normativa específica. 📝 Proyección de futuro y estabilidad: 🚀 Diseña tu propio camino hacia el éxito con nuestro plan de carrera personalizado, que te ofrece proyección de futuro y estabilidad a largo plazo en un ambiente de trabajo colaborativo y motivador. Movilidad geográfica: 🌍 Explora nuevas oportunidades y experiencias internacionales con nuestra opción de movilidad geográfica, permitiéndote expandir tus horizontes tanto profesional como personalmente. Eventos de empresa y networking: 🤝 Forma parte de una comunidad cercana y vibrante. Desde after-works hasta cenas y eventos exclusivos, te ofrecemos la oportunidad de conectar y disfrutar del mejor ambiente laboral. Únete a nuestras fiestas trimestrales. 🎉 Programa de referenciados: 📣 Deseamos atraer a los profesionales más destacados y, para lograrlo, te incentivamos a que nos refieras a aquellos talentos excepcionales que conozcas. Plan de rebranding: 🔄 Forma parte de nuestros embajadores de marca en redes sociales, contribuyendo a la estrategia de rebranding de la empresa, así como optando a distintos premios. Great Place to Work: 😊 Únete a un equipo donde se valora tu bienestar y se promueve un ambiente inclusivo y positivo. ¡Somos un Great Place to Work reconocido por nuestro excepcional clima laboral! ¿Cómo será el proceso de selección? • En la primera fase se llevará a cabo una llamada telefónica con el reclutador, en la segunda una entrevista con el responsable de Talent y/o Operaciones, junto a una prueba técnica y, por último, se valorará la prueba conjuntamente con el responsable del departamento en cuestión. En SII Group Spain, garantizamos igualdad de oportunidades para todos los candidatos, sin importar su raza, género, religión o condición sexual. Valoramos la diversidad y creemos en un entorno laboral inclusivo para cada miembro de nuestra comunidad. Trabajamos juntos para construir una organización que respeta y valora las diferencias, asegurando un espacio en el que todos puedan prosperar y contribuir al éxito colectivo.to en cuestión.

Unolab Manufacturing es un CDMO española con más de 20 años de experiencia en la fabricación productos sanitarios y medicamentos de máxima calidad, que se ha convertido en unos de los principales fabricantes de productos en monodosis estériles de Europa. Actualmente seleccionamos a un/a Técnico/a Fisicoquímico, que trabajará en nuestro centro de fabricación ubicado en Getafe, Madrid. Misión del puesto La posición de técnico/a de la sección de fisicoquímicos tiene como misión analizar los datos de los ensayos físico químicos realizados por los analistas en turnos. El objetivo es aportar una visión lógica interpretando todos los resultados, con el fin de garantizar la coherencia en la información obtenida, siendo capaz de identificar los errores o desviaciones, y generando protocolos y procedimientos que permitan dar una solución práctica para mitigar los fallos en los procesos. ¿Cuáles serán tus funciones? • Redactar y revisar la documentación GxP necesaria (EC, PNT, IT’s, INCUA, CUA, protocolos)., • Analizar y evaluar los datos primarios con el objetivo de elaborar informes de tendencia que permitan implementar mejoras y tomar decisiones. Revisar que los resultados primarios del laboratorio y los ensayos de aceptación de materiales de partida y filtros cumplen con las especificaciones., • Preparar las muestras y ejecutar los ensayos que apliquen, en caso de necesidad del laboratorio, dando soporte a los compañeros, • Realizar la aceptación de los materiales asociados a producto a través del ERP (SAP): MMPP, Acondicionamiento secundario, filtros y plástico. En caso de requerir análisis externos, gestión del envío de muestras a laboratorios externos y sus resultados., • Mantener contacto permanente con las supervisoras para hacer seguimiento de los turnos de trabajo, especialmente de tarde y noche (posibles OOS, no conformidades…) dando soporte en caso de necesidad, • Realizar y revisar las guías de producto, • Participar en las investigaciones de NC, OOS y reclamaciones y cumplimentar los anexos correspondientes y proponer CAPA si fuese necesario., • Definir y realizar los métodos analíticos de nuevos productos asociados a proyectos, participando en la validación, cualificación y transferencia analítica y del proceso., • Poner a punto, revisar periódicamente y validar las técnicas analíticas (métodos) nuevas o existentes proponiendo mejoras sobre los métodos de trabajo y técnicas utilizadas, • Revisar y tratar los datos de cromatografía liquida de alta resolución (HPLC), • Dar soporte al equipo de desarrollo y transferencias en la realización de ensayos, mantenimiento de equipos y gestión de residuos, • Impartir la formación en las técnicas analíticas y hacer seguimiento sobre el buen entendimiento de las mismas., • Mantener y supervisar el stock del material y reactivos., • Solicitar presupuestos externos (ensayos, materiales, equipos…) relacionados con su trabajo. Solicitar presupuesto para las calibraciones de los equipos y evaluación de los informes de proveedores, • Asegurar la correcta conservación, mantenimiento y actualización de la muestroteca, incluyendo la gestión de los rechazos, • Dar soporte en la coordinación del mantenimiento y calibración de los equipos y pipetas del laboratorio., • Redactar y revisar la documentación GxP necesaria (EC, PNT, IT’s, INCUA, CUA, protocolos)., • Analizar y evaluar los datos primarios con el objetivo de elaborar informes de tendencia que permitan implementar mejoras y tomar decisiones. Revisar que los resultados primarios del laboratorio y los ensayos de aceptación de materiales de partida y filtros cumplen con las especificaciones., • Preparar las muestras y ejecutar los ensayos que apliquen, en caso de necesidad del laboratorio, dando soporte a los compañeros, • Realizar la aceptación de los materiales asociados a producto a través del ERP (SAP): MMPP, Acondicionamiento secundario, filtros y plástico. En caso de requerir análisis externos, gestión del envío de muestras a laboratorios externos y sus resultados., • Mantener contacto permanente con las supervisoras para hacer seguimiento de los turnos de trabajo, especialmente de tarde y noche (posibles OOS, no conformidades…) dando soporte en caso de necesidad, • Realizar y revisar las guías de producto, • Participar en las investigaciones de NC, OOS y reclamaciones y cumplimentar los anexos correspondientes y proponer CAPA si fuese necesario., • Definir y realizar los métodos analíticos de nuevos productos asociados a proyectos, participando en la validación, cualificación y transferencia analítica y del proceso., • Poner a punto, revisar periódicamente y validar las técnicas analíticas (métodos) nuevas o existentes proponiendo mejoras sobre los métodos de trabajo y técnicas utilizadas, • Revisar y tratar los datos de cromatografía liquida de alta resolución (HPLC), • Dar soporte al equipo de desarrollo y transferencias en la realización de ensayos, mantenimiento de equipos y gestión de residuos, • Impartir la formación en las técnicas analíticas y hacer seguimiento sobre el buen entendimiento de las mismas., • Mantener y supervisar el stock del material y reactivos., • Solicitar presupuestos externos (ensayos, materiales, equipos…) relacionados con su trabajo. Solicitar presupuesto para las calibraciones de los equipos y evaluación de los informes de proveedores, • Asegurar la correcta conservación, mantenimiento y actualización de la muestroteca, incluyendo la gestión de los rechazos, • Dar soporte en la coordinación del mantenimiento y calibración de los equipos y pipetas del laboratorio. ¿Qué requisitos debes cumplir para este puesto? • Licenciatura en Ingeniería, Farmacia, Químicas, Biológicas, o similar., • Valorable máster en industria farmacéutica., • Experiencia en demostrada en departamentos de control de calidad de más de 3 años (dentro de la industria farmacéutica) en concreto en la sección de físico químicos., • Valorable experiencia en estériles., • Experiencia en HPLC., • Idiomas valorables: inglés B2, • Capacidad de organización y planificación, capacidad de análisis y resolución de problemas. Pero… ¿Qué ofrecemos desde UNOLAB? • Oferta salarial acorde a la experiencia del/ de la candidata/a., • Jornada con entrada y salida flexible – entrada de L a V entre las 08:00/09:00; salida de L a J entre las 17:00/18:30 (30 min para comer, 60 mins máximo). Los viernes la hora de entrada es entre las 07:30/09:00 salida es entre las 14:00/15:30., • Jornada intensiva en agosto (mismo horario que los viernes)., • 2 días de trabajo en remoto al mes., • Paquete de retribución flexible (cobee)., • Integración en un equipo dinámico y colaborativo., • Contacto directo con diferentes áreas del negocio., • Incorporación a un proyecto en pleno proceso de expansión y crecimiento. Unolab es una empresa comprometida con la igualdad de oportunidades entre mujeres y hombres, sin discriminación por razón de sexo.

Overview As Production Responsible, you drive the industrial strategy for the space division’s production plant and oversee Ariane 6 structure lines. You will align manufacturing with cost, quality, and schedule targets while leading health, safety, and continuous improvement initiatives. The role requires coordinating cross-functional teams, planning plant activities, and supporting new programs and ramp-ups. This position offers exposure to cutting-edge space projects and a high‑tech, operation‑driven environment with growth opportunities. Compensaciones / Beneficios • Involvement in cutting-edge space projects, • Dynamic, high-tech environment with strong industrial impact, • Professional development opportunities and continuous training, • Commitment to flexible working arrangements, • Diversity and inclusion, • Stability of permanent employment Responsabilidades • Deliver cost, quality, and on‑time performance for production lines, • Lead all fabrication operations in production, • Gather and analyze technical and financial data, • Lead Health & Safety routines on assembly lines, • Identify future production resource needs including space and subcontracting, • Drive improvement initiatives and determine outsourcing tasks, • Coordinate with technical, operational, and business teams for strategic alignment, • Implement operational gates strategy and manage plant routines (MPS, Go meetings), • Develop and maintain detailed planning of plant activities, • Coordinate internal stakeholders (quality, logistics, safety, planning), • Support New Program Proposals (BIDs) and define resources for new programs, • Propose layout, production flow and efficiency improvements; oversee new industrial means implementation Requisitos principales • Degree in Industrial, Mechanical, Aerospace Engineering or similar, • Experience in plant management, industrial projects, or strategic planning (preferred), • Knowledge of production processes, investment planning, and subcontracting, • Strong communication, leadership, and strategic thinking skills, • Health & Safety focus, • leadership, • strong communication, • strategic thinking, • production processes, • investment planning, • subcontracting

Overview En CT busca un Ingeniero/a de Diseño Funcional centrado en MBSE para fortalecer el desarrollo de sistemas de software y su simulación. Trabajarás en un entorno internacional, colaborando con equipos multiculturales para definir especificaciones y el diseño funcional basados en requisitos de alto nivel. Contribuirás a optimizar herramientas de simulación de sistemas complejos y a gestionar la documentación del ciclo de vida. Esta posición ofrece crecimiento, formación y un entorno dinámico orientado a la innovación sostenible. Compensaciones / Beneficios • Contrato indefinido, • Horario flexible, • Oportunidades de crecimiento y formación continua Responsabilidades, • Especificación y diseño funcional de sistemas de software basados en requisitos de alto nivel, • Desarrollo y optimización de herramientas de simulación para sistemas complejos, • Gestión de documentación derivada del ciclo de vida del sistema, • Participación en reuniones de coordinación técnica a nivel nacional e internacional Requisitos principales, • Formación en Ingeniería en Aeroespacial, • Nivel alto de inglés (imprescindible), • Conocimientos y experiencia en el ciclo V de ingeniería, • Conocimientos y manejo de herramientas DOORS, JIRA y CAMEO, • Experiencia en MBSE aplicada a proyectos de software de simulación, • Capacidad para trabajar en entornos multidisciplinarios y con equipos distribuidos internacionalmente, • trabajo en equipo, • comunicación eficaz, • colaboración internacional, • MBSE, • simulación de software, • CAMEO

Overview In this role you lead the Manufacturing Engineering team within Spacecraft Production & AIT Spain, driving engineering activities for the AIT area. You will co-engineer industrial plans with Design Offices to deliver high-precision, low-tolerance spacecraft assemblies for EOS, EOS and TNS programs within strict clean-room protocols. You’ll manage cost and schedule targets, enable continuous improvement, and collaborate with cross-functional teams to support bids and program execution. This is a hands-on leadership role in a highly technical, safety-conscious environment with a focus on impactful, space-grade manufacturing. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion policy, • permanent contract, • opportunities to work on EOS and TNS programs, • cross-functional collaboration, • safety-focused environment Responsabilidades, • Lead and develop the ME production team to meet schedule, quality, cost, and safety targets, • Deliver complete Manufacturing Dossiers (planning, MBOM, assembly procedures, times, and specs) for new programs in AIT using the DDMS toolset, • Provide industrial plans and accurate ME NRC/RC cost estimates to support bidding and offers, • Coordinate with EOS and TNS stakeholders and with Program Business Lines, AIT, Environmental Testing, and mechanical/ RF/ electrical leads, • Maintain adherence to cost targets and EAC budgets with Program Managers and Finance controllers, • Drive continuous improvement and innovation in the AIT area while complying with standards Requisitos principales, • Proven ME experience in space sector or high-precision environments and prior leadership of engineering teams, • Experience in Assembly, Integration and Test (AIT) within space or high-precision environments, • Strong leadership, stakeholder coordination, and communication skills, • Advanced English and Spanish written and spoken proficiency, • Deep knowledge of spacecraft manufacturing domains (thermo-mechanical assembly, electrical hardware integration, test setup, satellite final integration) and clean-room standards, • Knowledge of special processes, laser/DEA optical alignment, tolerance stack-up, MGSE/containers, • leadership, • team management, • stakeholder coordination, • spacecraft manufacturing domains, • thermo-mechanical assembly, • electrical hardware integration

Overview En este puesto, estarás a cargo de la instalación y el soporte de sistemas mecánicos y eléctricos en un cliente del sector aeronáutico, aplicando diseño y modelado con Catia V5 para asegurar soluciones técnicas integrales. Trabajarás dentro de un equipo multidisciplinar, promoviendo la eficiencia y la calidad en la instalación y el montaje. Es una oportunidad para impactar en la autonomía y la fiabilidad de sistemas críticos, con foco en crecimiento profesional y formación continua. Compensaciones / Beneficios • Contrato indefinido, • Horario flexible, • Oportunidades de crecimiento y formación continua Responsabilidades, • Crear planos y modelos detallados de componentes y sistemas mecánicos con Catia V5, • Instalación de sistemas mecánicos y eléctricos, • Diseño de soportes, arneses y rutas de cableado Requisitos principales, • Catia V5

Overview In this role you drive the Business Continuity Management program in Spain, reporting to senior leadership and aligning with global colleagues. You will establish a greenfield BCM capability, lead BIAs and continuity planning, and oversee ISO 22301 certification to ensure resilience and regulatory compliance. You’ll design cross-functional training and run realistic exercises, coordinating internal teams and external vendors. Your work protects assets, reputation, and operational stability while contributing to a mature, auditable BCM ecosystem. Compensaciones / Beneficios • flexible working arrangements Responsabilidades, • Define and drive the multi-year BCM roadmap and strategy across international sites, • Lead greenfield establishment and ongoing excellence of the BCM program, • Conduct rigorous BIAs and develop comprehensive continuity plans, • Serve as National BCM Risk Owner and integrate threat/vulnerability assessments into ERM, • Pursue and maintain ISO 22301 certification and regulatory compliance, • Design and execute scenario-based training and cross-functional exercises, • Manage external vendors and sub-contracted services for BCM deployment, • Provide expert incident support and conduct post-incident evaluations for continuous improvement, • Ensure BCM tools and processes are integrated with ADS Division operations, • Produce validated BCM documentation and a robust country Risk Profile Requisitos principales, • Strategic leadership to build and mature BCM program, • Experience establishing BCM from greenfield to certified state, • Knowledge of BIAs, risk assessments, ERM and incident management, • Ability to manage external vendors and cross-functional teams, • Experience with ISO 22301 or equivalent BCM standards, • Strong training design and exercise facilitation skills, • Awareness of regulatory and contractual BCM implications, • P&L influence through budget management, • Excellent stakeholder engagement and communication skills, • leadership, • cross-functional collaboration, • strong communication, • BIAs, • risk assessment, • ERM integration

Overview As a Manufacturing Engineer in the Harness/Electrical/Electronics space, you will lead end-to-end harness manufacturing and integration, optimizing time and cost while meeting project requirements and standards. You collaborate with engineering domains to ensure feasible designs and industrialization. You will define manufacturing processes, bills of materials, and integration plans, while supporting bid planning and shopfloor execution. The role emphasizes LEAN methods, modularization, and eco-efficiency in a space manufacturing setting. You will work across sites and with partners to deliver flight-relevant assemblies and campaigns. Compensaciones / Beneficios • flexible working arrangements, • equal opportunities Responsabilidades, • Validate design feasibility with engineering during development to ensure industrial compatibility, • Develop and maintain the Manufacturing Dossier with work instructions, data and test documents, • Analyze and optimize manufacturing technologies and capabilities across Space Spain Plant and partners, • Define Material & Process selections and ensure alignment with project execution, • Define Manufacturing BOM and interface with Supply Chain for material availability, • Contribute to bid phase through industrial planning, cost and schedule inputs, • Provide inputs to industrial planning including line balance, process times, and lead times, • Support production on breadboards, qualification and flight models, including on-site assistance, • Create process definitions in concurrence with Engineering and Mechanical Design Office, • Characterize work sequences, industrial parameters per Airbus OES guidelines, and identify tooling needs, • Integrate quality inputs (Control Plan) and PFMEA considerations into production, • Schedule delivery rates, optimize resources, and consider economic aspects, • Lead work preparation and release manufacturing procedures into work orders, • Foster feedback with Production & Quality teams and support CapEx planning when relevant, • Develop and deploy capabilities for new products/processes and support qualification campaigns, • Participate in SQCDP and shopfloor meetings, supporting recovery plans and scheduling, • Support AIT activities and participate in on-site campaigns or supplier facilities as needed Requisitos principales, • Aerospace electrical/electronic/system engineering background, • Experience in electrical harness manufacturing or related space industry processes, • 3-5 years in production/manufacturing engineering with space product relevance, • Ability to interpret documentation and produce clear instructions, • Knowledge of ECSS, ESCC, MIL standards within aerospace, • MS Office proficiency, especially Excel, • Understanding of electrical engineering and systems, • Desirable: CATIA Electrical Module, VBA/Google Apps Script programming, Windchill, SAP, • Willingness to work offsite for defined periods on short notice, • Strong teamwork, communication, planning, and adaptability, • team working, • process and quality driven, • high attention to detail, • Electrical harness manufacturing, • ECSS/ESCC/MIL standards, • MS Excel and MS Office

Overview As a Commodity Manager in strategic procurement, you drive the strategy and governance for sub-commodities within Navigation and Surveillance. You will lead cross-functional teams to secure cost-effective materials and services, manage supplier relationships, and optimize value and risk across programs. The role combines market insight, tendering and contract execution with a focus on profitability and sustainable supplier partnerships. You will work in a dynamic, globally connected procurement function that supports Airbus Defence and Space AirPower platforms. Compensaciones / Beneficios • flexible working arrangements Responsabilidades, • Establish, implement & monitor a Sub-Commodity strategy for your perimeter, • Manage supplier relationships and supplier-related development programs, • Lead the (Sub-) Commodity Multi-Functional Team, • Lead and drive to conclusion bids, tenders and supplier selection processes, • Lead and contribute to Procurement/Value Creation projects & initiatives to deliver synergies and savings, • Lead negotiations with suppliers to meet program expectations, • Set-up, negotiate and manage contractual agreements with suppliers, • Lead Supplier Evaluation Development (SED) and Vendor Management Requisitos principales, • Degree in Engineering, Business Management or equivalent (5+ years in procurement, engineering, services or project management), • Excellent negotiation skills with the ability to persuade and influence, • Experience in a matrix environment with proven stakeholder management, • Ability to anticipate, assess and mitigate risks, • Strong relationship building, team building, empowerment, motivation and conflict management, • Negotiation level of English, • Knowledge of SAP (asset), • negotiation, • stakeholder management, • relationship building, • SAP, • procurement and contract management, • supplier evaluation and vendor management

Overview En este puesto, estarás a cargo de la instalación y el soporte de sistemas mecánicos y eléctricos en un cliente del sector aeronáutico, aplicando diseño y modelado con Catia V5 para asegurar soluciones técnicas integrales. Trabajarás dentro de un equipo multidisciplinar, promoviendo la eficiencia y la calidad en la instalación y el montaje. Es una oportunidad para impactar en la autonomía y la fiabilidad de sistemas críticos, con foco en crecimiento profesional y formación continua. Compensaciones / Beneficios • Contrato indefinido, • Horario flexible, • Oportunidades de crecimiento y formación continua Responsabilidades, • Crear planos y modelos detallados de componentes y sistemas mecánicos con Catia V5, • Instalación de sistemas mecánicos y eléctricos, • Diseño de soportes, arneses y rutas de cableado Requisitos principales, • Catia V5

Overview En CT buscamos incorporar un/a Ingeniero/a de Sistemas aeronáuticos para diseñar sistemas eléctricos de aeronaves. Trabajarás en un equipo multidisciplinario para asegurar soluciones eléctricas seguras y fiables, alineadas con normativas aeronáuticas y estándares de la industria. Contribuirás a la creación de esquemas, pruebas y validaciones que soporten el ciclo de vida del producto. La posición ofrece contrato indefinido, modalidad híbrida y oportunidades de crecimiento en un entorno colaborativo y sostenible. Compensaciones / Beneficios • Contrato indefinido, • Modalidad híbrida, • Horario flexible, • Oportunidades de crecimiento, • Formación continua Responsabilidades, • Creación de esquemas y planos eléctricos detallados para aeronaves, • Diseño de circuitos eléctricos para subsistemas (energía, comunicación, navegación y entretenimiento), • Supervisión de diseños eléctricos del cliente y aporte de soluciones, • Análisis de fallos y evaluación de fiabilidad de sistemas eléctricos, • Diseño y ejecución de pruebas para verificar cumplimiento de especificaciones, • Asegurar cumplimiento con regulaciones de seguridad y estándares aeronáuticos Requisitos principales, • Formación en Ingeniería Aeronáutica o Industrial, • Conocimientos técnicos en ingeniería eléctrica, • Habilidades de análisis y resolución de problemas, • Capacidad de trabajar en equipos multidisciplinarios, • Experiencia mínima de 1 año en diseño eléctrico, • Conocimiento de Catia en módulo eléctricos, • Conocimientos de mazos eléctricos, • Nivel B2 de Inglés, • análisis y resolución de problemas, • trabajo en equipo multidisciplinario, • comunicación efectiva, • Catia (módulo eléctricos), • diseño eléctrico, • mazos eléctricos

Overview En CT Solutions buscamos un Project Manager PLM especializado/a en 3DEXPERIENCE para liderar implantaciones y evoluciones de la plataforma en clientes industriales de primer nivel. Serás el nexo entre el cliente y los equipos de consultoría y tecnología, asegurando plazos, calidad y alcance. Trabajarás con equipos multidisciplinares para diseñar, configurar e integrar la solución, y garantizar su adopción y satisfacción. Participas en proyectos PLM estratégicos y formas parte de una organización focalizada en transformación digital. Esta es una oportunidad para influir en implementaciones globales y trabajar con tecnologías Dassault Systèmes en un entorno híbrido. Compensaciones / Beneficios • Formación continua en tecnologías Dassault Systèmes, • Plan de desarrollo profesional y crecimiento, • Modalidad de trabajo híbrida/remota, • Horario flexible, • Retribución competitiva acorde a experiencia, • Incorporación a un equipo altamente especializado en PLM y transformación digital Responsabilidades, • Liderar implantación y despliegue de la plataforma 3DEXPERIENCE., • Definir y gestionar planificación, alcance, riesgos y recursos del proyecto., • Coordinar equipos funcionales y técnicos, internos y externos., • Gestionar la relación con clientes y stakeholders durante todo el ciclo del proyecto., • Supervisar análisis, diseño de procesos, configuración, integración y despliegue., • Identificar riesgos y proponer acciones correctivas., • Realizar el seguimiento económico y reportar estado del proyecto a dirección y cliente., • Garantizar adopción de la solución y satisfacción del cliente. Requisitos principales, • experiencia liderando implantaciones tecnológicas complejas, • experiencia en gestión de proyectos PLM/3DEXPERIENCE, • habilidad para coordinar equipos multidisciplinares, • gestión de relaciones con clientes y stakeholders, • habilidades analíticas y de gestión de riesgos, • capacidad de seguimiento económico y reporting a dirección, • visión global de proyectos, • gestión de clientes exigentes, • comunicación efectiva, • 3DEXPERIENCE, • gestión de proyectos PLM, • integración de sistemas

Overview In this role you will lead aerodynamic design and modelling for Airbus Defence & Space aircraft, delivering robust aerodynamic data and models to support performance, handling qualities and loads. You will work within Flight Physics in a multidisciplinary environment, liaising with partners to meet program requirements. You will advance numerical and experimental prediction tools, contribute to wind tunnel campaigns, and connect with external research to drive optimisation and technology development. This is an impactful opportunity to shape external shapes and aerodynamics for diverse aircraft programs. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion commitment, • permanent contract, • full-time role Responsabilidades, • Design external air vehicle shapes and provide comprehensive aerodynamic models and data for performance, handling qualities and loads in steady and unsteady regimes, • Deliver optimised aerodynamic solutions and data to customers within time, cost, and quality constraints, • Develop and maintain technologies, methods, tools, and competencies across Aerodynamics to support programmes lifecycle, • Contribute to achievement of vehicle project aerodynamic and flight performance requirements within time, cost, and quality targets, • Develop expertise in numerical and experimental aerodynamic prediction tools, • Advance aerodynamic technologies in line with Company Strategy, • Engage with external research community in Aerodynamics and multidisciplinary air vehicle design, • Collaborate with related disciplines (structures, loads, stability & control, mass properties) to support integrated design, • Link with international partners and multidisciplinary teams to ensure alignment with program goals Requisitos principales, • Master’s degree in Aerospace Engineering (PhD level valuable), • At least 5 years of experience in aerodynamic design and characterisation, • Strong experience in meshing and numerical aerodynamic prediction tools, • Strong experience in generating aerodynamic databases from experimental and CFD data, • Strong experience in CAD tools, • Knowledge/experience in wind tunnel testing (valuable), • Knowledge/experience in safe separation (valuable), • Knowledge/experience in Python and Matlab (valuable), • English advanced; German and/or French valuable, • Meshing and numerical aerodynamic prediction tools, • Generation of aerodynamic databases from experimental and CFD data, • CAD tools, • Wind tunnel testing, • Safe separation knowledge, • Python

Overview En este puesto, estarás a cargo de la instalación y el soporte de sistemas mecánicos y eléctricos en un cliente del sector aeronáutico, aplicando diseño y modelado con Catia V5 para asegurar soluciones técnicas integrales. Trabajarás dentro de un equipo multidisciplinar, promoviendo la eficiencia y la calidad en la instalación y el montaje. Es una oportunidad para impactar en la autonomía y la fiabilidad de sistemas críticos, con foco en crecimiento profesional y formación continua. Compensaciones / Beneficios • Contrato indefinido, • Horario flexible, • Oportunidades de crecimiento y formación continua Responsabilidades, • Crear planos y modelos detallados de componentes y sistemas mecánicos con Catia V5, • Instalación de sistemas mecánicos y eléctricos, • Diseño de soportes, arneses y rutas de cableado Requisitos principales, • Catia V5

Overview In this role you contribute to Fuel, Inerting and Fire Protection Systems for air platforms, applying MBSE to define architectures and specs. You will model system behavior and collaborate across Airbus groups and external partners to ensure airworthiness, safety and performance. The position supports testing, certification, and in-service fleet activities, shaping robust, integrated safety-critical systems. This is a hands-on, cross-functional role with growth in a transforming, digital environment. Compensaciones / Beneficios • flexible working arrangements, • permanent contract Responsabilidades, • Define Fuel, Inerting & Fire Protection Systems architecture, • Allocate functions, requirements, performance and integrity levels for subsystems, • Develop system and component specifications under MBSE, • Perform hydromechanical, functional, performance and thermal modelling, • Liaise with external partners, vendors and suppliers for product specifications and deliverables, • Coordinate with Flight Test, Safety, Chief Engineer's Office, Programs, Airworthiness, Customer Support, MAP/FAL on-site, Procurement, • Prepare airworthiness, certification and qualification documents, • Produce technical reports on functional, performance, control, monitoring, zonal safety and installation, • Support testing activities (test requirements, execution, tracking, reporting) for rig, ground and flight tests, • Analyze in-service occurrences and plan mitigations Requisitos principales, • Engineering Degree, • Working knowledge of Modelling tools (Matlab, SIMULINK, SCADE, Amesim, etc.), • Experience in Hydromechanical systems, • Experience in Aerospace Systems Controls and Monitoring (desirable), • Experience in Data Analytics (desirable), • Experience in Aerospace Hydromechanical Systems (desirable), • English negotiation level (written and spoken), • Matlab, • SIMULINK, • SCADE, • Amesim, • Hydromechanical systems, • Aerospace Systems Controls and Monitoring

Overview As an Electrical System Installation Design Engineer, you will shape the installation of electrical systems for aircraft, from architecture through detailed design to manufacturing support and in-service activities. You will collaborate across interfaces and departments, adapting to evolving design processes and regulatory requirements. You will work on critical-path electrical installations, delivering robust, compliant solutions in a dynamic aerospace environment. Join a mission-driven team focused on safe, efficient and scalable aircraft systems. Compensaciones / Beneficios • flexible working arrangements, • diversity and inclusion, • equal opportunities Responsabilidades, • Design and validate electrical harnesses and equipment installations across architecture, detailed design, manufacturing support and in-service phases, • Manage cross-department interfaces and ensure regulatory compliance and best practices, • Adapt to evolving electrical design processes and tools while facing new challenges, • Support aircraft development and manufacturing cycles, maintaining flexibility to changes during design, manufacture and operation, • Propose improvements and new ideas to enhance electrical system integration Requisitos principales, • 5+ years of engineering experience in design/engineering, • Degree in Aeronautical or Industrial Engineering or related discipline, • Strong interpersonal and communication skills, • High adaptability to new topics and networked work, • Proficiency in English and Spanish; German or French an asset, • Awareness of compliance risks and commitment to integrity, • strong interpersonal skills, • communication, • adaptability, • electrical system installation design, • design validation of electrical harnesses, • interface management across departments