Automation test jobs in HayesCreate job alerts

Test Development Engineer Job – Middlesex An exciting Test Development Engineer job is available in Middlesex for an engineer with a passion for designing advanced automated test and measurement systems for high power RF and microwave products. This Test Development Engineer job offers the opportunity to work on cutting edge technology while supporting the development, validation and production of complex RF amplifiers. The Test Development Engineer Job Responsibilities The successful candidate will: Design and develop Automatic Test Equipment (ATE) for high power RF amplifiers. Interface test systems with Vector Network Analysers (VNAs), RF power meters, spectrum analysers and other laboratory equipment. Design safe test solutions for equipment operating with hazardous voltages. Develop computer controlled test procedures and automated data capture systems. Support Production Test Engineers with component level fault finding and root cause investigations. Work alongside Design Engineers to ensure products are designed for efficient testing. Write and maintain Acceptance Test Procedures (ATPs) and TWT alignment procedures. Develop Environmental Stress Screening (ESS) methods and test equipment. Plan and execute product validation, qualification and design verification testing. Support and train Production Test Engineers on new test equipment and procedures. Support New Product Introduction (NPI) reviews to ensure test readiness. Produce technical reports and documentation for test activities. Key Responsibilities Design, manufacture, commission and verify custom test equipment and fixtures. Develop and maintain ATE software and configuration control. Ensure all test equipment and procedures meet safety requirements. Develop and approve Acceptance Test Procedures. Support First Article Inspection, Design Validation and Product Qualification testing. Provide detailed fault finding and root cause analysis to support production. Skills and Experience The ideal candidate will have: BSc or HND in Electrical/Electronic Engineering, Physics or a related discipline. Experience with analogue electronic circuits. Knowledge of power electronics. Experience using RF and microwave measurement equipment. Knowledge of LabVIEW for ATE design and implementation. Understanding of high voltage safety hazards and protection methods. * Strong fault-finding and analytical skills. Why Apply? This Test Development Engineer job offers the opportunity to work on innovative RF and microwave technology within a collaborative engineering team in Middlesex. The successful candidate will play a key role in developing advanced automated test systems while supporting the delivery of high performance products. If you are looking for an Test Development Engineer job where you can combine embedded systems, RF technology, automation and problem solving, this Test Development Engineer job in Middlesex offers an excellent opportunity for career development. This job is based in Middlesex and provides the chance to work on technically challenging projects within a growing engineering business

Senior Communications Engineer (270jc) - Heathrow, West London - £50 – £53k + 10% variable bonus + Benefits Our client is seeking an experienced Senior Communications Engineer to join a specialist engineering team supporting a large and technically complex mission-critical communications environment at Heathrow Airport. DUE TO THE NATURE OF THIS RECRUITMENT CONSULTANCY, WE ARE ONLY ABLE TO REPRESENT INDIVIDUALS WHO ARE EX MILITARY. This is an excellent opportunity for an experienced communications engineer who enjoys fault-finding, problem-solving and taking technical ownership within a demanding operational environment. We would be particularly interested in hearing from veterans with a strong background in communications, RF, telecommunications or electronic systems and have subsequently gained relevant commercial experience. You will work across a diverse communications estate incorporating both established and emerging technologies, including: - Mission-critical TETRA radio systems - DMR and PMR radio - RF-over-Fibre Distributed Antenna Systems (DAS) - 2G / 3G / 4G / 5G cellular infrastructure - Mission-critical dispatch systems - Fibre and IP communications - Antenna and RF distribution systems - Subscriber radio equipment and vehicle installations The Role Working as one of the senior technical specialists within the engineering operation, you will provide technical leadership across the support, maintenance and continued improvement of critical communications infrastructure. Your responsibilities will include: - Providing senior technical support across mission-critical radio and cellular systems. - Leading the investigation and resolution of complex engineering faults and incidents. - Acting as a technical escalation point for other engineers. - Coordinating technical recovery during major operational incidents. - Mentoring and supporting less experienced engineers. - Undertaking advanced fault diagnosis across RF, fibre, IP and communications infrastructure. - Conducting RF investigations including spectrum analysis, antenna testing, VSWR and Distance-to-Fault measurements. - Supporting infrastructure upgrades, equipment commissioning and lifecycle replacement programmes. - Planning and overseeing preventative maintenance. - Conducting Root Cause Analysis and supporting Problem Management activities. - Supporting the introduction and operational acceptance of new communications technologies. - Maintaining engineering documentation, configuration records and technical procedures. - Managing technical relationships with equipment manufacturers and specialist suppliers. - Working closely with airport stakeholders, operational teams and external engineering partners. You will also have the opportunity to become involved with emerging technologies including private LTE/5G, Neutral Host infrastructure, Push-to-Talk over Cellular and advanced monitoring and automation platforms. What We Are Looking For Applicants should have significant experience working with mission-critical radio communications and/or cellular infrastructure. Ideally, you will have: - Strong knowledge of PMR, DMR and TETRA technologies. - Experience with RF-over-Fibre and Distributed Antenna Systems. - A solid understanding of RF engineering principles. - Knowledge of antenna systems, feeders, fibre distribution and coverage optimisation. - Experience fault-finding IP networks within communications environments. - Strong analytical and technical fault-diagnosis skills. - Experience managing complex technical incidents. - Knowledge of Root Cause Analysis and Problem Management. - An understanding of ITIL Service Management principles. - Experience dealing with equipment manufacturers and technical suppliers. - The ability to mentor and provide technical guidance to other engineers. - Strong communication and stakeholder-management skills. Experience with Motorola, Teltronic, Hytera, Frequentis or similar mission-critical communications platforms would be advantageous. Experience of LTE/5G infrastructure, Network Management Systems, spectrum analysers, antenna analysers and fibre test equipment would also be useful. This role could be particularly well suited to individuals who have previously worked within military communications and have experience supporting operationally critical equipment where reliability, resilience and rapid fault diagnosis are essential. You do not need to have worked within an airport previously. More important is your ability to understand and support complex communications infrastructure in an operational environment. Due to the environment in which you will be working, applicants must be able to obtain and maintain Heathrow Airport security clearance. The Package will include basic salary of between £50 – 53k with a 10% variable bonus and includes standard UK benefits package as well as professional development and technical training opportunities This is a particularly interesting opportunity for an experienced communications engineer looking to take their technical knowledge into one of the UK's most complex and operationally important infrastructure environments. For more information, please contact Jean-Claude Hedouin at Ex-Mil Recruitment Ltd on (phone number removed)

Metrology Engineer (Programmer) – DenhamMeasure it. Automate it. Trust it with lives!Advance your career in a role where precision metrology meets real-world, life-saving impact. As a Metrology Engineer (programmer) within our Manufacturing team at Denham, you will join a high-performing department focused on automating inspection processes and programming advanced machinery. This is a brand-new role designed to introduce cutting-edge automation, reducing existing workloads while driving our facility's technical capabilities forward. From initial calibration to the final automated run, your expertise ensures our life-saving aerospace technologies are verified safely and compliantly.Direct Impact, Global Scale. Life-Saving Mission.At Martin-Baker, the work we do matters. We design, manufacture and support life-saving equipment used by aircrew around the world. Our products operate in demanding environments, where quality, reliability and attention to detail are critical.We're proud of our long history in aerospace and defence, also focused on the future. Joining Martin-Baker means becoming part of a business with a clear purpose, strong engineering capability and a long-term commitment to its people, products and customers.Whether you work in engineering, operations, commercial, finance, supply chain or support functions, your contribution helps deliver equipment that protects lives. It is challenging work, but it is also meaningful, and with over 7,800 lives saved, it gives our people the opportunity to be part of something with real impact.The OpportunityWorking full-time alongside our technical specialist, you will act as a vital line of defence to ensure absolute measurement integrity across our manufacturing operations. This role offers deep day-to-day variety, substantial technical training investment, and an opportunity to shape work that has not previously been done. You will receive full 1-on-1 mentorship as well as external training to develop your skills in emerging digital metrology systems.What You'll Do• Inspection Process Automation: Program, test, and validate automated or semi-automated metrology machinery, with a primary focus on Coordinate Measuring Machines (CMMs).• Method Optimisation: Review existing inspection methods for complex machined components to remove labour-intensive manual checks and improve production flow.• Drawing & Specification Review: Interpret engineering drawings, technical specifications, and surface finish requirements as part of your daily quality checks.• Bench Metrology & Inspection: Apply physical inspection knowledge using manual gauges, shadowgraphs, micrometres, and other standard metrology equipment.• Emerging Technology Support: Help identify, adopt, and integrate future inspection automation and digital metrology solutions as the role evolves.• Quality Validation: Execute measurement method validation and support investigations when product or equipment performance is uncertain.What We're Looking For• CMM Programming Experience: Proven, hands-on experience programming a CMM is a strict requirement; candidates must be able to generate programs rather than simply running existing ones.• Metrology Baseline: Practical metrology inspection experience, including bench work, manual gauges, and shadowgraph operation.• Drawing Literacy: The absolute ability to read and interpret engineering drawings to establish correct acceptance criteria.• Preferred Background: We are looking for experienced metrology inspectors seeking upward progression into a specialised technical role. Defence, aerospace, or automotive sector experience is highly desirable.• Technical Literacy: Computer literacy and proficiency with Microsoft Office are required. An engineering degree, HNC, or HND is highly valued but not mandatory.• The Mindset: A logical problem solver who can operate with training and support without needing continuous supervision. An understanding of GD&T is preferred, though exceptional candidates without it will be considered.• Share and demonstrate the Martin-Baker values.Our ValuesAt Martin-Baker, we value professionalism, understanding, teamwork, humility, accountability and integrity. We look for people who take pride in their work, collaborate openly and act with care because the work we do matters.What We Offer•Excellent pension package with strong employer support — Martin-Baker contributes 9% of your salary (non-contributory to the employee), with further employer contributions that grow as you increase your own•Life Assurance•Lunchtime finish on a Friday•Personalised training and development plan•Healthcare plan•25 days annual leave plus bank holidays•Opportunity to purchase additional annual leave•Martin-Baker + (retail discounts platform)•Occupational Health team•Workplace Nursery Benefit scheme•Cycle to work schemeHow to Apply / Your Interview JourneyPlease submit your CV and should you wish, a brief covering letter outlining your suitability, including any relevant experience, skills and expertise you can bring to the role.Hit " Apply Now ,"After submitting your application, your details will be reviewed, and the recruitment team will be in touch.• Stage 1 (Telephone Interview): A detailed conversation with your Recruitment Business Partner to understand your background, logistics experience, and typical day-to-day workflow.• Stage 2 (Final Face-to-Face Interview & Trade Test): A single, comprehensive 1.5-hour site interview at our Denham facility with the Hiring Manager. This will feature a technical conversation alongside a practical trade test where you will measure parts to demonstrate your inspection capabilities.We believe in equal opportunity, committed to creating an inclusive environment where everyone is respected. We want you to be able to do your best work.Martin-Baker is a signatory to the Armed Forces Covenant, showing our support and commitment to our Armed Forces and their families, proudly supporting those who serve.This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS).The role also involves access to information governed by U.S. Export Control Laws (including ITAR); therefore, all applicants must satisfy ITAR eligibility requirements.TPBN1_UKTJ

all positions London/Helsinki – hybrid – FullTime Senior Programmer, Engine Reliability Our engine, Titan, powers some of the highest-grossing games in mobile – titles that have generated billions in revenue and reach hundreds of millions of players. We are investing heavily into the future of Titan, and as part of that investment we’re building a brand-new Reliability team: an autonomous, high-skill group that will work alongside our engine teams, empowering them to work safer, faster, and easier through better infrastructure, automation, and feedback loops. The role that Reliability plays is crucial to the success of Titan’s future. As agentic workflows become more common the pace of iteration rises, and confidence in what we ship becomes the bottleneck. We see this team as a strategic bet in solving that problem — building the validation surfaces, automation, and reliability loops that help our engine teams move faster without increasing risk to what matters most – our games and players. This is an AI-forward engineering team by design. We are not treating AI as a side tool; we are building around the reality that modern engineering will increasingly depend on AI-assisted workflows for validation, automation, and test generation — with strong engineering judgment and clear guardrails. This role is client-leaning, focused on the engine and runtime: C++, mobile platforms, runtime behaviour, performance, and the practical challenges of validating shared engine changes before they reach games. Read about the engine behind every Supercell game (and why you’ve never heard of it). • Build & evolve automated reliability foundations: including validation workflows, regression detection, integration stability, and performance/stability signals., • Establish and grow realistic end-to-end validation surfaces across real devices and real services, so issues are caught before they reach games., • Improve how shared engine changes are validated against real game integrations, reducing manual pain and making confidence more repeatable., • Create and maintain tooling, infrastructure, and test surfaces that engine and horizontal teams can rely on., • Partner with client, server, and live-ops teams to make systems testable and reduce surprises., • Apply modern AI-assisted workflows to validation, automation, and test generation in pragmatic, well-guardrailed ways., • Partner closely with client, server, and live-ops teams to make systems more testable and reduce downstream surprises., • Contribute directly to priority technical work where improving testability or validation unlocks broader reliability gains., • Strong professional experience in modern C++., • Engine/runtime development experience, with comfort debugging complex cross-platform issues across platforms such as iOS, Android, macOS, or Windows., • Strong instincts around testing and validation strategy: you understand the trade-offs between unit, integration, and end-to-end testing, and where each creates the most value., • Experience with build systems, automation, and developer tooling such as CMake, CI pipelines, and scripting., • Strong collaboration skills and the ability to work effectively across teams without adding unnecessary process overhead., • Interest in AI-assisted engineering workflows, with good judgment about where they add leverage and where they need guardrails., • Comfort operating in an ambiguous space and helping shape a new team’s practices as it grows., • Experience with device automation, device farms, or test frameworks such as Catch2 or gTest., • Experience with observability and debugging tools such as Sentry, logs, metrics, tracing, or dashboards., • Experience improving testability, validation, or reliability in shared engine or platform code., • Experience working across client and backend workflows, even if your main background is client-side., • Hands-on experience using AI-assisted development tools as part of day-to-day engineering work. You can be located either in London or Helsinki. Supercell is a games company from Helsinki, Finland, with offices also in San Francisco, Seoul, Shanghai, and London. You might know us as the makers of Hay Day, Clash of Clans, Boom Beach, Clash Royale, and Brawl Stars. Our mission is to create great games that as many people as possible play for years and that are remembered forever. So, how do we make great games? By putting together the best teams and giving them the freedom and independence to succeed. And by taking risks, failing, sharing learnings, and killing lots of projects. Hey, You Might Love It Here! Independent cells and trust are at the core of our culture. But it takes more than that to make great games. We take good care of our people, providing them with the compensation, work environment, and resources they need to succeed while having fun along the way. You Are Not Your Job Title ™ Here, you won’t need to focus on chasing titles or climbing ladders. Internally, our job titles don’t include prefixes like Senior, Junior, Principal, or Director. Recognition isn’t tied to your title, as it doesn't define the impact you can have around here. Luring you in with glitter, glamour, and gems isn't what we're about. We want you to enjoy your time here fully, so we structure our compensation and benefits with that in mind. It starts with perceiving you as a human being, not a resource. • Relocation? Yes! No matter where you’re moving from, our dedicated mobility team and partners will support you throughout your move. We’ll ensure the process is as smooth as possible for you and anyone joining you – whether they’re family members of the human or animal kind! Not Sure if You Should Apply? Many candidates with great skills and experience second-guess themselves. The bar is high, but if this role excites you, apply! We’re here to help you succeed. Also, we're happy to learn about any specific accommodations you may need to fully engage in our recruitment process. Wishing you all the best, The Supercell Recruitment team This optional question helps us evaluate how we’re doing on diversity and inclusion. Answering or skipping this question will not affect your job application. The answers to this question are not collected nor seen on an individualized basis. Your answer will be used to assess our diversity and inclusion efforts only. We collect your application data to manage and plan our recruitment activities globally. In the unhappy event that you don’t get selected, we will store your details for future opportunities. However, if you don’t wish to be contacted, please let us know. The Supercell Applicant Database Privacy Policy is your friend in case you want to learn about topics such the processing of your personal data as well as when your personal data will be deleted if you don’t give your consent to retain it. Note: The consent period lasts for 5 years #J-18808-Ljbffr

Mobile Panel Wirer (Training on Renewables) £42,000 - £45,000 + Progression to Service Engineer + Private Medical + Benefits Ealing, Covering London Are you a Panel Wirer with City and Guilds 2391 certificate looking for a mobile, field based role where you'll receive training to become an expert on the test, inspection and servicing of automated rain-water harvesting equipment? In this mobile role you will be servicing, testing, installing and maintaining high-tech rainwater recycling systems on commercial and industrial construction projects. This will involve working across central London, with 3 weeks of planned preventative work and 1 week of reactive work per month. No requirement for 24-hour call outs. This company have been established for 40 years and have carved out a profitable niche with their in-house designed water-saving and recycling projects. With new legislation coming into effect, their looking towards a bright future of growth and expansion. This role would suit a Panel Wirer or similar looking for a mobile position that offers training and a direct progression route to become a Service Engineer working on automated renewable technologies. The Role: Servicing, installing and maintaining rainwater harvesting & recycling equipment Test and inspection of control panels Planned Preventative work and reactive work Expert training on bespoke, automated renewable water recycling equipment Field based, covering within the M25 Funded training courses including ECS Card and Support through to Gold Card and SSSTS The Person: Panel Wirer or similar City and Guilds 2391 certificate UK Drivers License Job Reference: BBBH 26505e Keywords: Electrician, Service, Engineer Electrical, Test, Testing, Verification, PAT, Automation, Automated, Panel, Wirer, Control, Wiring, Fitter, Commercial, Industrial, M25, Field, Mobile, London, Central, West, Perivale, Ealing, Greenwood, Wembley, Hayes, Slough If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Test Development Engineer Job – Middlesex An exciting Test Development Engineer job is available in Middlesex for an engineer with a passion for designing advanced automated test and measurement systems for high power RF and microwave products. This Test Development Engineer job offers the opportunity to work on cutting edge technology while supporting the development, validation and production of complex RF amplifiers. The Test Development Engineer Job Responsibilities The successful candidate will: Design and develop Automatic Test Equipment (ATE) for high power RF amplifiers. Interface test systems with Vector Network Analysers (VNAs), RF power meters, spectrum analysers and other laboratory equipment. Design safe test solutions for equipment operating with hazardous voltages. Develop computer controlled test procedures and automated data capture systems. Support Production Test Engineers with component level fault finding and root cause investigations. Work alongside Design Engineers to ensure products are designed for efficient testing. Write and maintain Acceptance Test Procedures (ATPs) and TWT alignment procedures. Develop Environmental Stress Screening (ESS) methods and test equipment. Plan and execute product validation, qualification and design verification testing. Support and train Production Test Engineers on new test equipment and procedures. Support New Product Introduction (NPI) reviews to ensure test readiness. Produce technical reports and documentation for test activities. Key Responsibilities Design, manufacture, commission and verify custom test equipment and fixtures. Develop and maintain ATE software and configuration control. Ensure all test equipment and procedures meet safety requirements. Develop and approve Acceptance Test Procedures. Support First Article Inspection, Design Validation and Product Qualification testing. Provide detailed fault finding and root cause analysis to support production. Skills and Experience The ideal candidate will have: BSc or HND in Electrical/Electronic Engineering, Physics or a related discipline. Experience with analogue electronic circuits. Knowledge of power electronics. Experience using RF and microwave measurement equipment. Knowledge of LabVIEW for ATE design and implementation. Understanding of high voltage safety hazards and protection methods. * Strong fault-finding and analytical skills. Why Apply? This Test Development Engineer job offers the opportunity to work on innovative RF and microwave technology within a collaborative engineering team in Middlesex. The successful candidate will play a key role in developing advanced automated test systems while supporting the delivery of high performance products. If you are looking for an Test Development Engineer job where you can combine embedded systems, RF technology, automation and problem solving, this Test Development Engineer job in Middlesex offers an excellent opportunity for career development. This job is based in Middlesex and provides the chance to work on technically challenging projects within a growing engineering business

Site Electrician (Progression to Service Engineer) £42,000 - £45,000 + Training on Renewables + Progression + Company Van (Private use) + Private Medical + Benefits Greenford, Ealing Are you a Site Electrician who holds a City and Guilds 2391 certificate and a valid ECS Card looking for the opportunity to be trained on unique renewable systems with the goal of becoming a fully qualified Service Engineer? Do you want an autonomous role covering London without anti-social hours and overtime requirements? In the role you will be servicing, installing and maintaining high-tech rainwater recycling systems on commercial and industrial construction projects. This will involve working across central London, with 3 weeks of planned preventative work and 1 week of reactive work per month. No requirement for 24-hour call outs. This company have been established for 40 years and have carved out a profitable niche with their in-house designed water-saving and recycling projects. With new legislation coming into effect, their looking towards a bright future of growth and expansion. This role would suit a Site Electrician with C&G 2391 Test & Inspection certificate and a valid ECS card looking for expert training to become a fully autonomous site Service Engineer. The Role: Servicing, installing and maintaining rainwater harvesting & recycling equipment Planned Preventative work and reactive work Expert training on bespoke, automated renewable water recycling equipment Field based, covering within the M25 Company Van for private useThe Person: Site Electrician or similar City and Guilds 2391 certificate Valid ECS Card and UK Drivers LicenseJob Reference: BBBH 26505c Keywords: Electrician, Service, Engineer Electrical, Automation, Automated, Construction, Site, Commercial, Industrial, M25, Field, Mobile, London, Central, West, Perivale, Greenwood, Wembley, Hayes, Slough If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Mobile Panel Wirer (Training on Renewables) £42,000 - £45,000 + Progression to Service Engineer + Private Medical + Benefits Ealing, Covering London Are you a Panel Wirer with City and Guilds 2391 certificate looking for a mobile, field based role where you'll receive training to become an expert on the test, inspection and servicing of automated rain-water harvesting equipment? In this mobile role you will be servicing, testing, installing and maintaining high-tech rainwater recycling systems on commercial and industrial construction projects. This will involve working across central London, with 3 weeks of planned preventative work and 1 week of reactive work per month. No requirement for 24-hour call outs. This company have been established for 40 years and have carved out a profitable niche with their in-house designed water-saving and recycling projects. With new legislation coming into effect, their looking towards a bright future of growth and expansion. This role would suit a Panel Wirer or similar looking for a mobile position that offers training and a direct progression route to become a Service Engineer working on automated renewable technologies. The Role: Servicing, installing and maintaining rainwater harvesting & recycling equipment Test and inspection of control panels Planned Preventative work and reactive work Expert training on bespoke, automated renewable water recycling equipment Field based, covering within the M25 Funded training courses including ECS Card and Support through to Gold Card and SSSTSThe Person: Panel Wirer or similar City and Guilds 2391 certificate UK Drivers LicenseJob Reference: BBBH 26505e Keywords: Electrician, Service, Engineer Electrical, Test, Testing, Verification, PAT, Automation, Automated, Panel, Wirer, Control, Wiring, Fitter, Commercial, Industrial, M25, Field, Mobile, London, Central, West, Perivale, Ealing, Greenwood, Wembley, Hayes, Slough If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Test Electrician (Progression to Renewables Service Engineer) £45,000 - £50,000 + Training on Renewables + Progression + Company Van (Private use) + Private Medical + Benefits Greenford, Ealing Are you an Electrician or similar with a City and Guilds certificate in Testing and Inspection (2391) looking for a gateway into the renewables sector? Do you want a field-based role working on commercial and industrial sites where you'll be trained on how to fault-find PLC controlled rain water recycling equipment? In the role you will be servicing, installing and maintaining high-tech rainwater recycling systems on commercial and industrial construction projects. This will involve working across central London, with 3 weeks of planned preventative work and 1 week of reactive work per month. No requirement for 24-hour call outs. This company have been established for 40 years and have carved out a profitable niche with their in-house designed water-saving and recycling projects. With new legislation coming into effect, their looking towards a bright future of growth and expansion. This role would suit an Electrician with a City and Guilds 2391 Test & Inspection certificate and a valid ECS card looking for expert training to become a fully autonomous site Service Engineer. The Role: Servicing, installing and maintaining rainwater harvesting & recycling equipment Planned Preventative work and reactive work Expert training on bespoke, automated renewable water recycling equipment Field based, covering within the M25 Funded training courses including ECS Card and Support through to Gold Card and SSSTS Company Van for private useThe Person: Electrician or similar City and Guilds 2391 certificate UK Drivers LicenseJob Reference: BBBH 26505f Keywords: Electrician, Service, City, Guild, 2391, Engineer Electrical, PLC, Test, Testing, Verification, PAT, Automation, Automated, Construction, Site, Commercial, Renewables, Solar, Rain, Water, Recycling, Energy, Industrial, M25, Field, Mobile, London, Central, West, Perivale, Greenwood, Wembley, Hayes, Slough If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Senior Communications Engineer (270jc) - Heathrow, West London - £50 – £53k + 10% variable bonus + Benefits Our client is seeking an experienced Senior Communications Engineer to join a specialist engineering team supporting a large and technically complex mission-critical communications environment at Heathrow Airport. DUE TO THE NATURE OF THIS RECRUITMENT CONSULTANCY, WE ARE ONLY ABLE TO REPRESENT INDIVIDUALS WHO ARE EX MILITARY. This is an excellent opportunity for an experienced communications engineer who enjoys fault-finding, problem-solving and taking technical ownership within a demanding operational environment. We would be particularly interested in hearing from veterans with a strong background in communications, RF, telecommunications or electronic systems and have subsequently gained relevant commercial experience. You will work across a diverse communications estate incorporating both established and emerging technologies, including: • Mission-critical TETRA radio systems, • DMR and PMR radio, • RF-over-Fibre Distributed Antenna Systems (DAS), • 2G / 3G / 4G / 5G cellular infrastructure, • Mission-critical dispatch systems, • Fibre and IP communications, • Antenna and RF distribution systems, • Subscriber radio equipment and vehicle installations The Role Working as one of the senior technical specialists within the engineering operation, you will provide technical leadership across the support, maintenance and continued improvement of critical communications infrastructure. Your responsibilities will include: • Providing senior technical support across mission-critical radio and cellular systems., • Leading the investigation and resolution of complex engineering faults and incidents., • Acting as a technical escalation point for other engineers., • Coordinating technical recovery during major operational incidents., • Mentoring and supporting less experienced engineers., • Undertaking advanced fault diagnosis across RF, fibre, IP and communications infrastructure., • Conducting RF investigations including spectrum analysis, antenna testing, VSWR and Distance-to-Fault measurements., • Supporting infrastructure upgrades, equipment commissioning and lifecycle replacement programmes., • Planning and overseeing preventative maintenance., • Conducting Root Cause Analysis and supporting Problem Management activities., • Supporting the introduction and operational acceptance of new communications technologies., • Maintaining engineering documentation, configuration records and technical procedures., • Managing technical relationships with equipment manufacturers and specialist suppliers., • Working closely with airport stakeholders, operational teams and external engineering partners. You will also have the opportunity to become involved with emerging technologies including private LTE/5G, Neutral Host infrastructure, Push-to-Talk over Cellular and advanced monitoring and automation platforms. What We Are Looking For Applicants should have significant experience working with mission-critical radio communications and/or cellular infrastructure. Ideally, you will have: • Strong knowledge of PMR, DMR and TETRA technologies., • Experience with RF-over-Fibre and Distributed Antenna Systems., • A solid understanding of RF engineering principles., • Knowledge of antenna systems, feeders, fibre distribution and coverage optimisation., • Experience fault-finding IP networks within communications environments., • Strong analytical and technical fault-diagnosis skills., • Experience managing complex technical incidents., • Knowledge of Root Cause Analysis and Problem Management., • An understanding of ITIL Service Management principles., • Experience dealing with equipment manufacturers and technical suppliers., • The ability to mentor and provide technical guidance to other engineers., • Strong communication and stakeholder-management skills. Experience with Motorola, Teltronic, Hytera, Frequentis or similar mission-critical communications platforms would be advantageous. Experience of LTE/5G infrastructure, Network Management Systems, spectrum analysers, antenna analysers and fibre test equipment would also be useful. This role could be particularly well suited to individuals who have previously worked within military communications and have experience supporting operationally critical equipment where reliability, resilience and rapid fault diagnosis are essential. You do not need to have worked within an airport previously. More important is your ability to understand and support complex communications infrastructure in an operational environment. Due to the environment in which you will be working, applicants must be able to obtain and maintain Heathrow Airport security clearance. The Package will include basic salary of between £50 – 53k with a 10% variable bonus and includes standard UK benefits package as well as professional development and technical training opportunities This is a particularly interesting opportunity for an experienced communications engineer looking to take their technical knowledge into one of the UK's most complex and operationally important infrastructure environments. For more information, please contact Jean-Claude Hedouin at Ex-Mil Recruitment Ltd on (phone number removed)

Experience across SAP testing disciplines, including SIT, end-to-end testing, regression, integration and non-functional testing. Proven experience in test strategy, estimation, planning, defect management, quality governance and test reporting. Performance testing and automation operating-model des

The Role: Inspection and testing of control panels, motors, cables and connectors Fault finding on newly manufactured panels and customer returns to ensure safety Carry out Portable Appliance Testing Liaise with Engineers to resolve quality issues and uphold company standards Monday to Thursday, 8:3

Are you a Test and Inspection Engineer or similar with a background in controls or automation looking for a stable and secure role with a great work life xdjnayx balance, within a thriving automation company, offering a highly competitive salary and generous b. Test & Inspection Engineer (Controls /

Experience across SAP testing disciplines, including SIT, end-to-end testing, regression, integration and non-functional testing. Strong experience leading test automation on large, complex SAP transformation programmes. Performance testing and automation operating-model design.

Requires test automation and regression testing skills. Seeking a MOD DV Cleared Test Automation Engineer for a technology consultancy in Portsmouth, working on complex software projects.

Choice of start & finish times, early finish Fridays.A leading manufacturer of rotating equipment is actively seeking an experienced.Their innovative machinery is used across a wide variety of industries including oil & gas, renewables, nuclear, chemicals, refrigeration, and defence.

Operations is at the heart of everything Amazon does, and automation is one of the ways we optimise our processes. As an Automation Engineer, youll make sure that our automated systems are working at their best so that our customers get their orders on time.

Work Strata are hiring warehouse operatives for our well-known engineering client based in Eye, Suffolk.Successful candidates' daily responsibilities will include working to company procedures, assisting in the packing and shipping process, transporting stock around the warehouse using delivery cage

We are expanding our team to plan and deliver complex test and trials activity within ourstate-of-the-arttest and evaluation facility at our head office in St Neots, Cambridgeshire, in response to increasing programme demand and a higher cadence oftest and trialsdelivery. Working alongside the Princ

Job Title: Warehouse Operative Location : Wimblington, March Salary: £12.Monday to Friday (14:00-20:00hrs) £13.Monday to Friday (20:00-22:00hrs) £13.On 4 Off Days (06:00-18:00hrs) £13.Nights Monday to Friday (18:00-06:00hrs) Job Type: Full-time, Permanent Shifts Available: There are two shifts a

Lead Automation Engineer Job Title: Lead Automation Engineer Location: Iver, Buckinghamshire Salary: £58,000 (DOE) + company annual bonus (performance based) Shift: 4 on 4 off (Days & Nights) Sector: Automated Manufacturing Job Role of the Lead Automation Engineer. As the Lead Automation Engineer,

Experience you'll need as a Data Process & Automation Engineer Experience in process improvement, workflow automation or automation engineering. Data Process & Automation Engineer Location: London - Hybrid Salary: £50,000 - £60,000 We are seeking an experienced Data Process & Automation Engineer t

In this Electronics Test Engineer role near Exeter, Devon, you will: Test and fault-find electronic products through production and final test Read circuit diagrams and diagnose faults down to component level Carry out repairs, testing, and firmware or settings updates where required Support the wid

Execute test scripts, test scenarios, and test cases across various test stages. Experience with test automation approaches for data and ETL testing. Strong understanding of ETL/ELT testing methodologies and data warehouse testing principles.

Test Engineer Production Support Location: Chippenham, Southpoint Business Park Contract: Long-Term Ongoing Contract Working Hours: Full Time, typically 7:30am 3:30pm, Monday to Friday Pay Rate: £25 - £30 per hour, dependent on experience Start Date: Immediate Pertemps are currently recruiting for

Manufacturing & Operational Support Work closely with Manufacturing and Production teams to improve: First Pass Yield (FPY) Test cycle times Equipment uptime and reliability Overall test efficiency * Identify and eliminate recurring test issues and systemic weaknesses. Principal Test Eng

Job Description Warehouse Operative Premier Park £33,490 Per annum with an exciting range of benefits Working 45 hours per week You must be a qualified reach truck driver (in-house or external qualification) to apply for this role.Take your warehouse career to the next level with Sysco GB.We're hom

UK CONTRACT OPPORTUNITY | Automation Engineer III A leading global energy & grid engineering organisation is looking for an experienced Protection / Automation Engineer to supp

Per annum with an exciting range of benefits .You must be a qualified reach truck driver (in-house or external qualification) to apply for this role.Take your warehouse career to the next level with Sysco GB.We’re home to some of the UK’s leading food businesses including Brakes and Fresh Direc

Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation.Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe.Our UK presence has been growing at pace, meaning we

Seeking a QA QC Engineer for utility-scale solar PV projects in York.The role involves supporting quality assurance and control under a QA QC Manager for large EPC projects.

Seeking a Software Test Engineer/QA Tester to ensure software quality across web, mobile, and desktop apps, involving functional and non-functional testing, regression testing, and automation script development.

Are you an Artwork Manager who knows packaging and print inside out?.Do you thrive on managing complex projects, solving problems and making sure every detail is right before it goes to print?.The Advocate Group is proud to be exclusively partnering with Monster Energy to find an.Monster Energy is m

You will be involved across the full project lifecycle, from initial requirements gathering and solution design through to implementation, testing and delivery.

Warehouse & Logistics Operations Manager.We’re looking for an experienced.Warehouse & Logistics Operations Manager.You’ll take ownership of warehouse, logistics and cargo-handling operations, ensuring everything runs.You’ll lead and develop teams, coordinate warehouse, transport and customs fu

Carrowhugh Group are recruiting for a strong Project Planner for a busy civils contractor specialising in infrastructure projects.Provide project planning support to the project team, producing, monitoring and maintaining the project programmes across all phases of delivery, ensuring alignment with

COX (Design Consult Construct) Group, is a Main Contractor and multi-disciplinary building consultancy delivering a broad range of professional property services across the UK.The team is driven by the modern built environment and the belief that well-considered design directly influences how people

Manor Court Care Home, Britten Drive, North Road, Southall, Middlesex, UB1 2SH.Occasional night visits or weekend work may be required.Here at Bupa we support those when they need it the most.Our care homes are dedicated to delivering person-centred care, supporting independence and honouring choice

We truly believe our independence is one of our greatest strengths.

Oculus Legal Group has been retained on an exclusive basis to hire a Senior Associate to join the Private Client team of an acclaimed, multi-office, regional firm.Our client has a collaborative, down to earth culture - the quality of work is attractive as is the work/lifestyle balance and a strong a

Social Housing Strategy & Partnerships Lead.Remote (with some travel to Liverpool & social housing providers required).End Furniture Poverty is a campaign and social enterprise initiative dedicated to ending furniture poverty across the UK.We work with housing providers, charities, policymakers and

To provide admin support to the department.Assisting in Administrative work (filing, scanning, copying).Dealing regularly with Mobile Service Provider and keeping up to date of Mobiles Phones Inventory for the Bank.Setting up video and audio conferences, projectors, PCs, and laptops.Working together

Our client is a global Freight Forwarder based in the London Heathrow area.Due to the ongoing success and demands of their business, they are looking for a new Air Imports Clerk to focus on their temperature sensitive biological & pharmaceutical shipments, joining an existing team of Customer Ops Ag

Dirac Trading Group | Acton, London | Full-time, permanent | On-site.Dirac Trading Group is hiring a hands-on Warehouse Manager to take ownership of daily operations at our Acton warehouse.This is a practical, on-site leadership role for someone who can keep outbound orders moving, lead a mixed ware

Compliance Officer – Higher Education.London, Marylebone near Bond Street.Part-time – approximately 2–3 days per week.Head of Quality and Standards / Senior Management.The European School of Economics in London is seeking a highly organised and proactive Compliance Officer to support its new r