Trabajos electrical testing en Gosport - Page 2Crear alertas

Description CMS2 is a specialist equipment manufacturer supplying maritime atmosphere control systems and support services. CMS2 are experts in enabling high availability atmosphere management systems to generate breathable air for submariners, allowing boats to remain underwater for long periods of time. We do this by combining over sixty years of expertise with the latest technology and processes to design, build and support high quality systems and solutions. We are seeking a Test and Instrumentation Engineer to join our established team The Test and Instrumentation Engineer will provide the testing of CMS2’s air purification equipment to the highest of quality and in accordance with the company procedures, customer standards and regulatory requirements. Key Responsibilities The Test and Instrumentation Engineer will provide the testing of CMS2’s air purification equipment to the highest of quality and in accordance with the company procedures, customer standards and regulatory requirements. Integration of test instrumentation Interface benchtop instruments (oscilloscopes, power supplies, signal generators) with automation platforms. Data acquisition and analysis Configure DAQ systems for data capture to compile test information to formulate baseline information. Continuous improvement Optimise test cycle times, improve reliability and implement error proofing techniques for automated test processes. Contact for Test & Instrumentation activities on the full range of CMS2 key products and provide a pro-active and hands-on approach to the test, and fault diagnosis for CMS2 equipment on and off site. Develop and maintain in house automated test equipment that will enhance the timings and effort required on day-to-day testing. Conduct thorough testing and validation of electrical automation systems, ensuring compliance with design specifications, safety standards, and performance requirements. Carry out, flash testing, IR testing, earth bonding and point to point checks. Investigating mechanical and electrical problems, diagnosing and repairing faults where appropriate. Use benchtop test equipment such as oscilloscopes, counter timers, Multimeter, earth testers, IR testers, meggers etc… Understanding the need for use of ESD equipment when working with certain components. Ensure documentation and test results are recorded as required. Feedback to the engineering team with any design or maintenance issues that have occurred throughout the test phase. All to be carried out in accordance with company test procedures. Secondary tasks: Perform hydrostatic and pneumatic pressure tests on mechanical components, piping systems, and plant assemblies in accordance with engineering specifications and safety regulations. Run factory acceptance tests (FAT’s) with the customer present. Demonstrate how our equipment works from mechanical, electrical and a chemical process side. Time allocation: 20% (Equal to 1 day per week) – To be focus time on automating test procedures for more efficiency within the department. 80% (Equal to 4 days per week) – To be focused on Test and instrumentation work. General activities: Carry out any other ad-hoc duties as required to support the needs of the business. Provide a professional backup service for colleagues during peak times or during absence. Follow company procedures, standards and regulatory requirements. Maintain continuous professional development to ensure knowledge is up to date. Act as an ambassador for the company in all interactions with customers and the public. Skills, Knowledge and Expertise Essential: NVQ/HNC qualification in engineering Apprenticeship in relevant engineering field Previous test & commissioning experience in a highly regulated industry (process engineering) Strong commitment to health and safety, environment and quality IOSH Working Safely Ability to read and interpret documents such as process engineering drawings, specifications and procedures Good hands on electrical / mechanical skills Pragmatic approach to tasks Must be able to work efficiently as part of a team and to work under pressure in a challenging environment Excellent attention to detail Flexibility, enthusiasm, self-motivated and able to work well under own initiativ Desirable: HND/Degree qualified in engineering Previous experience within a manufacturing and defence environment Shipbuilding / Ship Repair background within the MOD / Naval Industry Familiar with NPI / NPD Experience of air purification equipment on-board submarines highly desirable Able to forge strong working relationships both internally and externally IOSH Managing Safely 5S / LEAN continuous improvement Some travel to MoD sites in the UK and customer sites overseas may occasionally be required. Other requirements: Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to Security Check level or be able to obtain this level. To gain SC clearance you will normally have had to have been a resident in the UK for a minimum of 5 years. Candidates must be able to obtain a basic security check which will normally require you to have been resident in the UK for at least 3 years. Benefits At CMS2, we believe in rewarding our people and supporting their well being. Alongside our competitive salaries we offer a comprehensive benefits package including, Company Profit Share Scheme, Generous Holiday Allowance with the ability to buy and sell holiday and more

Ready to find the right role for you? Salary: up to £52,000 per annum plus Veolia benefits Hours: 40 hours per week, Mon - Fri Location: Airbus, Anchorage Road, Portsmouth, PO3 5PU When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. We are seeking an experienced, time-served professional with a proven track record in the building services sector and relevant trade qualifications. The successful candidate will effectively manage all Hard Services operations, including small projects, while delivering comprehensive maintenance services for M&E and Building Fabric that fully comply with both contractual and statutory requirements. What we can offer you: * 25 days of annual leave * Access to our company pension scheme * Free physiotherapy service * Discounts on everything from groceries to well known retailers * Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to * Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: * Serve as technical lead for Electrical and Mechanical services, ensuring all operational, planned, and reactive maintenance activities are scheduled and completed on time in accordance with statutory legislation, maintenance specifications, health and safety policies, and agreed SLA response times * Manage and operate L8 records and systems, implement permit to work systems, and ensure compliance with all statutory requirements including electrical inspection and testing, compressed air systems, LOLER, lifts, cranes, chillers, cooling towers, sprinkler systems, and fire alarms * Communicate effectively with clients, vendors, and team members at all levels, adjusting communication style to suit the target audience * Develop, manage, and monitor employee performance against KPIs and personal objectives, while focusing on people development, succession planning, and talent growth * Apply best practice performance management within the team, mentor colleagues, and implement team measurement criteria to encourage an exemplary team working ethos * Provide flexible support for technical callout requirements and compile Safe Systems of Work (SSoW) documentation What we're looking for: * Ability to pass DBS check * Engineering qualification * Experience controlling budgets and expenditure with a proven track record of effective cost management and margin achievement * Previous experience in a management role as the team lead with good HR experience across all aspects of people management * Able to compile local policies and procedures whilst demonstrating alignment with group and statutory best practice * Recognised Health and safety qualification and management experience. What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Basic Salary typically c.£42,000 (OTE £45,000 to £47,500 including overtime) Home based Mobile We have two roles one for a fully qualified Mobile Maintenance, PPM, Remedial and a separate role which would suit candidates who also have 2391 to carry out EIR’s in addition to the Maintenance PPM. You will be based from home to manage your own Commercial and Retail customers within your Territory. I have worked closely with this business for over 30 years leading the way in Electrical Compliance Testing and Remedials, Electrical Projects, LED upgrades and Lighting Maintenance. Mobile Maintenance/PPM Electricians/remedial works Job functions: Reporting directly to the Head Office Retail, industrial and commercial work, carrying out compliance visits Remedial works to NICEIC standards Lighting maintenance and occasional project work Emergency light testing Fire alarm testing PAT testing Fire extinguisher servicing PPM maintenance Desired Experience & Credentials • Fully Qualified Electrician- with 2365 with NVQ 3 or 236 parts 1 and 2 for example, and 17th or 18th Edition (any other direct equivalents to the same level will be acceptable), • Full UK driving licence (maximum of 6 points), • PPM maintenance experience, • IT literate and able to use a Smartphone/Tablet for communication and reporting, • Must be able to carry and use steps/ladders enabling short duration work at height Personality characteristics Outgoing and personable, able to build and retain strong client and staff relationships Work efficiently and on your own or as part of a team Ability to maintain high standards and follow quality control processes Proactive and confident attitude Flexible with working overtime and weekends if needed Willing to travel and stay away from time-to-time expenses paid Dynamic approach to work Benefits • An OTE of £45k+ (depending on role, location and experience) basic salary will be up to £40k, abundance of weekend and OOH call out bonus additional, • Based on door-to-door hours 47.5 hours contract with a compulsory 1-hourunpaid lunch at midday, • 20 days holiday + Bank Holidays (Long Service rewards of extra holidays), • Benefits pack including pension and rewards schemes, discount shopping, childcare vouchers and more, • Van and fuel provided (for work use only), • Smartphone & Tablet, test equipment, uniform, and PPE provided, • Ongoing training and progression Fully qualified 2391 Electrical Testing/PPM and Remedial works Job functions: Reporting directly to the Head Office Retail, industrial and commercial work, carrying out compliance visits Remedial works to NICEIC standards Lighting maintenance and occasional project work Emergency light testing Fire alarm testing PAT testing Fire extinguisher servicing Fixed wire testing PPM maintenance experience Desired Experience & Credentials: • Fully Qualified Electrician- with 2365 with NVQ 3 or 236 parts 1 and 2 for example, and 17th or 18th Edition (any other direct equivalents to the same level will be acceptable), • 2391 or direct equivalents to the same level, • Full UK driving licence (maximum of 6 points), • PPM maintenance experience, • IT literate and able to use a Smartphone/Tablet for communication and reporting, • Must be able to carry and use steps/ladders enabling short duration work at height Personality characteristics: Outgoing and personable, able to build and retain strong client and staff relationships Work efficiently and on your own or as part of a team Ability to maintain high standards and follow quality control processes Proactive and confident attitude Flexible with working overtime and weekends if needed Dynamic approach to work Willing to travel and stay away from time-to-time expenses paid Benefits: • An OTE of £47.5k+ (depending on role, location and experience) basic salary will be up to £42k abundance of weekend and OOH call out bonus additional without 2391 basic salary may be lower from c.£38,000, • Based on door-to-door hours 47.5 hours contract with a compulsory 1-hourunpaid lunch at midday, • 20 days holiday + Bank Holidays (Long Service rewards of extra holidays), • Benefits pack including pension and rewards schemes, discount shopping, childcare vouchers and more, • Van and fuel provided (for work use only), • Smartphone & Tablet, test equipment, uniform, and PPE provided, • Ongoing training and progression For more information or an immediate interview please forward your CV and I will organise a convenient time to call you to see if in the ballpark for you

At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Role Overview: TÜV SÜD is a world leader in testing and product certification. With over 70 years' experience in the UK, TÜV SÜD works on the forefront of innovative technology and provides peace of mind that emerging innovations and products are safe, reliable and compliant. We provide testing, product certification, knowledge services and training to a range of industries covering the Aerospace, Defence, Electronics & Consumer, Machinery, Marine, Medical, Rail and Telecommunications sectors. Working as part of a team of environmental test specialists, the successful graduate will have the opportunity to develop technical understanding and regulatory test skills to contribute to the provision of a comprehensive environmental testing service, working with customer across a wide range of industry sectors. The successful applicant will also have the opportunity to join our Graduate Development/Progression Scheme to ensure a full understanding of all business functions and operations. Duties and Responsibilities: • Performing Climatic and Mechanical testing to relevant test standards, regulatory requirements and defined test plans. Tests include High Temperature, Low Temperature, Humidity, Pressure, Ingress Protection Mechanical Vibration, Mechanical Shock., • Undertaking activities in support of our ISO 17025 Laboratory accreditation., • Working closely with customers during attended testing., • Recording test results using various data acquisition systems, and electronic logbooks, • Liaison with customers relating to the specification and conduct of test and the interpretation of the results., • Helping to develop and refine test plans with the customer., • Help with the development of test methods and other departmental documentation., • Working with the team to implement continuous improvement activities and develop procedures and processes to improve the efficiency of the testing service. Essential Criteria: • Degree qualified (or equivalent) in an engineering or relevant scientific subject (e.g. Electrical, Electronic or Mechanical Engineering, Physics, Manufacturing etc)., • An interest in working in a test environment, • Motivated, dynamic and enthusiastic, with a drive to learn and develop, • Good understanding of IT systems such as Microsoft Word, Excel and Outlook, • Ability to deliver work independently or as a team to defined deadlines, • Conscientious with good interpersonal, customer skills and commercial awareness, • A flexible approach to work, with a willingness to work ad-hoc overtime, shift working or on customer sites as and when required. Desirable requirements: • Completion of an industry placement year relevant to their studies Further Information TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance

HVAC Service Engineer Location: Portsmouth (field-based across Portsmouth & surrounding areas) Salary: £42,000 - £52,000 DOE Benefits: Company van, fuel card, overtime, call-out allowance, pension, 25 days holiday plus bank holidays Contract: Permanent, Full-Time A leading building services and facilities management contractor is seeking an experienced HVAC Service Engineer to support a portfolio of commercial and industrial clients across Portsmouth and the surrounding areas. This is a stable, long-term opportunity offering structured training, manufacturer support, and clear progression for engineers looking to develop both technically and professionally. Role Responsibilities Planned preventative maintenance (PPM) and reactive repair works on HVAC systems Fault diagnosis on electrical, mechanical, and refrigeration components Servicing and maintenance of: Split & multi-split air conditioning systems VRV / VRF systems AHUs, FCUs, and ventilation systems Heat pumps and chillers (experience-dependent) Carrying out pressure testing, leak detection, evacuation, and re-gassing Completing service reports, F-Gas logs, and compliance documentation Liaising with clients, site contacts, and helpdesk teams Ensuring all works are carried out in line with: F-Gas regulations Health & Safety legislation Company and site procedures Participation in an on-call rota (typically 1 in 6 / 1 in 8) Essential: Minimum 3+ years' experience as an HVAC / AC Service Engineer F-Gas Category 1 Strong fault-finding capability on HVAC systems Good working knowledge of electrical and mechanical components Full UK driving licence Comfortable working independently in a field-based role Desirable: NVQ Level 2/3 or City & Guilds in Refrigeration & Air Conditioning Experience with chillers, heat pumps, or commercial ventilation 18th Edition (BS7671) IPAF / PASMA Interested? INDAV If you believe you have the skills and experience to excel in this role, apply today. Alecto Recruitment Limited is acting as an employment business for this vacancy. We thank all applicants for their interest; however, only those shortlisted will be contacted. Keywords: HVAC Engineer Portsmouth, Air Conditioning Engineer Portsmouth, HVAC Service Engineer Portsmouth, AC Engineer Portsmouth, Refrigeration Engineer Portsmouth, Commercial HVAC Engineer, VRV Engineer Portsmouth, VRF Engineer Portsmouth, Facilities Management HVAC

Panel Builder / Panel Wirer (BMS & Controls) Location: Fareham Salary: £30,000 - £40,000 Contract Type: Permanent Annual Leave: 20 days We are recruiting for an experienced Panel Wirer to work for our client in Fareham to join their BMS and controls engineering team. Key Responsibilities • Building and wiring BMS control panels, • Working from schematics, wiring diagrams, and GA drawings, • Terminating components and field devices to industry standards, • Supporting panel testing and quality checks, • Working independently and as part of an expanding engineering team Requirements • Proven experience as a Panel Wirer / Control Panel Wireman, • Ability to confidently interpret electrical drawings, • Strong attention to detail with neat, high-quality workmanship, • Good understanding of control circuits and DIN-rail components, • ECS/CSCS card (beneficial but not essential)

Shift Technician - RF Testing Fareham, Hampshire (PO15) Rotating Shifts: 10am-10pm / 10pm-10am | 4 on / 4 off Are you a hands-on Electrical/Electronic Technician ready to join a cutting-edge test facility? We're looking for Shift Technicians to work alongside engineers and technical specialists performing RF (Radio Frequency) testing in a brand-new, state-of-the-art laboratory. This is a dynamic, 24/7 shift-based role, offering the chance to develop your technical expertise while contributing to high-profile testing projects in a fast-paced, collaborative environment. What You'll Be Doing Performing RF testing using industry-standard equipment and customer-specific test plans Working as part of a team delivering 24/7 testing services on a rotating shift pattern Monitoring and maintaining calibration and test equipment Collaborating closely with Project Managers and other technical staff Accurately recording and reporting test results according to quality procedures Interacting with customers during attended testing sessions Who We're Looking For NVQ Level 3 in Electrical/Electronic Engineering, or practical engineering experience Hands-on experience with RF test equipment, such as spectrum analysers or oscilloscopes Proficient with Microsoft Office (Word, Excel, Outlook) Motivated, enthusiastic, and able to work effectively as part of a team Conscientious, with strong interpersonal and customer skills Able to document results accurately and maintain quality standards Comfortable working rotating 24/7 shifts and able to travel to site independently Why Join Us? You'll be part of a technical team at the forefront of RF testing, working in a fully equipped, modern facility. We offer a comprehensive benefits package, including generous holiday allowance, pension scheme, life assurance, wellbeing support, and access to training and career development opportunities. If you're looking for a hands-on, technically challenging role with real impact, this is your opportunity to join a team shaping the future of RF testing. Apply now to start your journey in a fast-growing, technology-driven environment. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Compliance Contract Manager (Electrical, Fire & Lifts) – Hampshire Based Council £450 per day Umbrella 37 hours per week Temporary Contract Service Care Solutions are currently recruiting for a Compliance Contract Manager on behalf of a Hampshire based Council. This role will sit within the Council’s Compliance team and will be responsible for managing contracts relating to electrical inspection and testing, fire risk assessments and servicing, and lift servicing. The successful candidate will drive contractor performance, chair monthly contract meetings and ensure that all compliance activities are delivered safely, effectively and in line with statutory requirements. You will also work closely with residents, contractors and internal teams to ensure access is secured and that the Council achieves and maintains 100% compliance across its property portfolio. Responsibilities Manage contracts relating to electrical inspection and testing, fire risk assessments and lift servicing Chair and manage monthly contract meetings across each compliance discipline Monitor contractor performance, KPIs and service delivery standards Ensure that actions arising from contract meetings are recorded, monitored and completed Work with internal teams and contractors to secure access to properties Liaise with residents, leaseholders, councillors, building users and other stakeholders Produce monthly compliance performance reports and presentations Support the specification and procurement of future contracts Verify contractor invoices and ensure payments are in line with contractual agreements Monitor budgets and ensure value for money across the service Attend operational and strategic meetings as required Support the Compliance Manager and deputise where required Support additional Tier 2 compliance activities where allocated Assist with the implementation and management of compliance management systemsRequirements Previous experience within a compliance contract management role Experience working with at least one of electrical, fire or lift compliance Strong contractor management and performance monitoring experience Good understanding of statutory compliance and the importance of timely delivery Knowledge of electrical inspections and testing regulations and/or fire risk assessment legislation Any knowledge of LOLER or lift compliance would be beneficial Experience producing compliance reports, presentations and KPI information Good understanding of budget management, cost control and value for money Strong Microsoft Office skills, particularly Word and Excel Experience using compliance management systems would be beneficial Ability to build strong working relationships with contractors, customers and stakeholders Excellent communication skills and confidence leading meetings Previous experience within housing, property or local authority environments would be advantageousIf you're looking for work but this role isn’t for you, please feel free to get in touch with what you're looking for. Contact: James Glover at Service Care Solutions on (phone number removed) or via email at (url removed)

Electrician - Hampshire Southampton - Winchester - Basingstoke - Aldershot - Portsmouth Permanent, Full Time Salary: £42,083 per annum Recruiting on behalf of an end client We are recruiting an experienced Electrician on behalf of a well-established property and maintenance organisation operating across Hampshire. This is a permanent, full-time position offering stable employment, a local working area and a consistent workload within domestic properties. This opportunity would suit a qualified domestic electrician who is looking for long-term security, good working standards and the backing of a structured maintenance team rather than short-term contract work. The role will involve carrying out a wide range of electrical repairs, maintenance and installation works in occupied homes, working in line with current IET Wiring Regulations, including Part P. You will be responsible for diagnosing faults, completing jobs to a high standard and delivering a professional, customer-focused service. Typical duties will include fault finding on single and three-phase installations, electrical repairs and installations, testing and inspection works including EICRs and minor works certification, portable appliance testing, shower installations and replacements, electric heating installations, immersion replacements and domestic heating controls. You will also be required to complete all relevant certification and update works through handheld systems while flagging any urgent repairs or health and safety concerns. The successful candidate must be a fully qualified electrician with demonstrable domestic experience. Essential requirements include holding an AM2 qualification or equivalent, City and Guilds 18th Edition (2382), strong fault-finding ability, and experience working to British Standards and manufacturer requirements. A full UK manual driving licence is required, as a company vehicle will be provided. Candidates must live within Hampshire or within a reasonable commuting distance and be willing to undertake a DBS check. This role offers a salary of £42,083 per annum, company vehicle, tools and equipment, and the chance to work within a respected organisation that places value on safety, quality and customer service. Ongoing training and development are also available. Applications are being managed by the recruitment partner on behalf of the end client. All enquiries will be handled in confidence. To apply or find out more, please submit your CV. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission

Electrical Design Engineer (Maritime / Marine) £45,000–£55,000 Full-Time, Permanent Portsmouth Introduction Are you an electrically minded problem‑solver with a passion for engineering innovation? This is an exciting opportunity to play a key role in the design, development, and testing of advanced marine electrical systems. If you thrive in a hands‑on, technical environment and want to contribute to the development of cutting‑edge solutions within a collaborative engineering team, this role is an excellent next step in your career. The Role As an Electrical Design Engineer, you will be involved in the full engineering lifecycle—from initial concept design through to manufacturing, testing, and commissioning. You’ll work closely with multidisciplinary teams to deliver safe, functional and high‑performance electrical systems for marine applications. Key Responsibilities Support the creation of new electrical designs from initial concept to final manufacture. Conduct design validation through electrical system and equipment calculations. Apply analysis results to demonstrate compliance with functional, safety, and performance requirements. Liaise with suppliers, subcontractors, test facilities, and customers to support project needs. Carry out hands‑on testing of electrical systems and equipment. Use the onsite test facility to build prototype setups and verify electrical designs. Apply systems engineering principles to support the full lifecycle of product development. Follow company processes relating to health & safety, training, quality, personnel, and project delivery. Support the controlled release of drawings and documentation for production. Work alongside engineers specialising in pressurised air and gas systems, hydraulics, and cooling systems. Contribute to the compilation of vessel electrical test documentation for first‑of‑class builds. Assist with Bill of Materials creation and part setup. About You Skills, Experience & Qualifications Marine electrical background with 5+ years’ experience, OR a degree in Electrical Engineering. Experience using 3D CAD systems is advantageous but not essential. Maritime experience is beneficial, but strong technical ability, communication skills, and drive are key. Experience preparing design specifications. Knowledge of hazardous voltages and CAN Bus systems is advantageous. Strong understanding of electrical systems and engineering fundamentals. Experience in build, test, and commissioning activities. Comfortable working in a close-knit engineering team. Self‑motivated, proactive, and willing to think creatively to solve problems. What’s on Offer 25 days annual leave plus bank holidays Private Healthcare Life Assurance - 4x salary Pension scheme Flexible working If you're an ambitious Electrical Engineer who enjoys hands‑on work, technical challenge, and the opportunity to shape innovative marine systems it would be great to hear from you! Apply today and take the next step in your engineering career. Marine Resources Recruitment Ltd acts as an employment agency for permanent and fixed term contract recruitment and as a recruitment business for the supply of contract workers. Please note that by applying for this job you accept our Terms of Use and Privacy Policy which can be found on our website

Job Description: 2391 Electrician (With Van) A great opportunity to work for a growing Electrical contractor based in Portsmouth. Electricians will be require to take on EICRs, remedial works, fault finding, on social housing associations within Portsmouth. This contract can also lead to a permanent role. Details; * Start date - ASAP * Hours - 8:30 - 4:30 * Tester provided * Van provided * Software - Tradecert Your new role * Carry out EICR testing to 2391/Inspection & Testing standards. * Complete responsive repairs, fault finding, and remedial works within social housing properties. * Ensure all electrical installations comply with the latest BS7671 Wiring Regulations. * Issue accurate and timely certification on site. * Diagnose electrical faults quickly and deliver effective solutions. What you'll need to succeed * 18th edition * 2391 Inspection & Testing (or equivalent 2394/2395). * Strong experience carrying out EICRs and remedial repairs in domestic settings. * Full UK Driving Licence. * 3 years domestic EICR experience (preferably social housing) If this role sounds like you, please click apply and one of the team will get back to you shortly

Our client is looking for an experienced Electrical Engineer - Domestic to support a portfolio of residential properties across London. This role is an excellent opportunity for a qualified domestic electrician seeking stability, ongoing training, and strong long‑term earning prospects. The Electrical Engineer - Domestic will: * Deliver electrical repairs, installations, maintenance, and testing within social housing properties. * Carry out EICRs, remedial works, fault‑finding, and electrical system upgrades. * Ensure all work complies with BS 7671 and relevant electrical safety regulations. * Provide a high‑quality, customer‑focused service to residents. * Maintain accurate documentation, reports, and records for all completed tasks. * Follow safe working practices and adhere to all health & safety requirements. The Electrical Engineer - Domestic will have: * City & Guilds Level 2 / Level 3 or NVQ Level 3 Electrical qualification (essential). * Experience in domestic electrical repairs, maintenance, or EICR testing—ideally within social housing. * AM2 qualification. * Strong understanding of electrical safety, compliance, and industry regulations. * A reliable, professional approach with solid fault‑finding ability and excellent customer‑service skills. If you’re a resident‑focused electrician looking for a secure, long‑term position, this role offers the opportunity to grow your career while making a meaningful contribution to local communities. Apply now with an up‑to‑date CV, and we’ll be in touch soon

We are seeking qualified Electrical Fitters / Marine Electricans to carry out various maintenance work on Royal Naval vessels. WORKING HOURS Day's Mon - Thurs (Apply online only) Fri (Apply online only) OUTLINE OF DUTIES • Ensure safe systems of work are carried out at all times. * Read/Interpret Electrical Drawings, MDS and Guidance information. * Undertake new system fits across all classes of RN vessels. * Install various types of Electrical Equipment associated with an RN vessel such as motors, starters, control panels, Radar and associated equipment, weapons systems, internal and external comms. * Fault diagnosis and defect rectification. * Carry out Electrical Testing. * Execute various crimping techniques. ERMA, Gold pin. * Soldering * Terminate multiple types of Cable. * Install Cable Support Systems. Cable Tray/Basket/Conduit/Hangers * Install/Reeve cables * Pack various types of glands / transits. Roxtec, RISE, Brattberg. * Terminate multi pin plugs such as 608 and Amphinol. * Remove and install basic mechanical and constructive items as required. General information Based in HM Naval base Portsmouth in support of Royal Navy, RFA and commercial vessels employed as an industrial electrical fitter. Personnel must have a deep understanding of electrical work and be able to carry out the various techniques used in ship repair and support industry. Suitable candidates will have a good understanding of safe systems of work including electrical work, confined spaces, working at height and RN specific safety operations. In addition a basic knowledge of mechanical systems and associated equipment is required candidates must be flexible to undertake tasks across any trade discipline as required. Must be prepared to work in a team to provide a high quality service to meet customer expectations. Qualification requirements Must have completed recognised electrical apprenticeship. Hold a minimum a level 3 qualification (NVQ/City & Guilds) in an electrical discipline

Electrician - Solar PV £40k-£45k Base Salary - Permanent Employed Role + Company Van + Benefits Location - Hampshire | Portsmouth | Southampton Alecto Recruitment are working with a specialist and frontrunner within the Renewable Energy sector and who are currently looking to expand their Electrical team. The role is an exciting full time and fully employed position working as an Electrician and primarily being responsible for the installation of Solar PV systems throughout the Hampshire region. Job Summary: As a Solar PV Electrician you'll be primarily focussed on electrical installation of Solar PV systems to residential properties. Working mainly on new-build properties and sites. Up to £40k-£45k Base Salary (subject to experience) + Company Van, Fuel Card + Optional Overtime. 25 days holiday + bank holidays. 8am-5pm Monday-Friday. Work is predominantly in the Fareham, Portsmouth and Southampton areas (Max 1.5/2 hours away from the office). Skills Required: Fully qualified electrician, 18th Edition, JIB Gold Card, AM2 etc. Ideally qualified with 2391 testing & inspection - however training provided if you don't have it. Some experience installing Solar PV systems previously is desired, however again training can be provided for the right person. Full UK Driving Licence. Alecto Recruitment Limited is acting as an Employment Business in relation to this vacancy. If your experience matches please forward your CV asap and to Mike Prew, Alecto Recruitment. INDG Qualified Electrician, Solar PV Electrician, Solar Electrician, Solar PV Installation, Battery Storage, Renewable Energy, BS 7671:2018, 2391 Testing & Inspect, JIB Gold Card, AM2, NVQ Level 3 Electrician

Job Title: Senior Electrical Design Engineer Location: Fareham Salary: £55,000 to £65,000 Employment Type: Permanent Working Arrangements: This is a hybrid role (3 days on-site, 2 days from home) Take the next step in your career as the key electrical expert within a forward-thinking engineering team, based in Fareham. You’ll lead the design of robust electrical distribution systems for products operating in some of the toughest environments, from naval vessels and submarines to helicopters and ground vehicles. Why Join? - Become the go-to electrical specialist, solving complex technical challenges. - See your designs used in high-impact, safety-critical applications. - Work closely with manufacturing and testing teams to ensure practical, efficient solutions. - Focus on safety, reliability, and best-practice electrical design. Key Responsibilities for the Senior Electrical Design Engineer: - Design electrical circuits using CAD tools. - Develop safe, reliable electrical distribution systems. - Produce technical reports, drawings, schematics, and cable harness designs. - Collaborate with cross-functional teams to support manufacturing and testing. - Provide expert electrical engineering guidance. Skills & Experience required: - 5–10 years’ electrical design experience - Background in aerospace/defence preferred; automotive or medical also considered. - Strong AC & DC system design experience. - Skilled in technical documentation and detailed schematics. - Knowledge of safety-critical design (cable sizing, short-circuit protection). - Excellent attention to detail and strong written communication. Due to the nature of the work, this role requires BPSS clearance, and applicants must be eligible to obtain it. For more information, please contact Cathy Swain: T: (phone number removed) E: (url removed)

Our client is contracted to provide responsive maintenance and void property works. This is for both in hours and part of a call out rota in the Portsmouth area. Workshop Recruitment are seeking a conscientious and enthusiastic Electrician with a can-do attitude and flexible approach. You must have relevant qualifications, commercial experience along with domestic, working in your core trade with additional experience and capability to complete tasks outside your competency, working in and around Portsmouth. KEY DUTIES Electrical tests and inspections. Reactive repairs and fault finding. Full domestic electrical rewiring. Electrical installation to kitchens and bathrooms. Electrical installation of domestic heating systems Re-active maintenance Planned maintenance KNOWLEDGE AND SKILLS REQUIRED: City & Guilds 2382 17th Edition Electrical Regulations REQUIRED: City & Guilds 2391 Testing & Inspection or equivalent 18th Edition Electrical Regulations – working knowledge desirable NVQ 3 in electrical installation Full current driving licence A DBS check is required before commencement of role 2-5 years of working in Social Housing or Building Maintenance environment. Be able to demonstrate you are a competent tradesperson and have the tools to do the work. Have the prerequisite technical, statutory, and legislative knowledge for the trades you perform for the company, ensuring you keep abreast of the updates and changes. Diagnose Faults Excellent customer service Knowledge of the Portsmouth area BENEFITS 23 days holiday plus bank holidays Buy and Sell Holiday On Call bonuses Life Insurance Discounted Gym Membership Contributory Pension scheme Reward programmes Company Van and fuel card Uniform Employee Assistance Programme

Purpose of the Role: • We are seeking a skilled and motivated Power Support Engineer to carry out installation, maintenance, and repair work across a range of domestic and commercial environments. This role requires strong mechanical aptitude, excellent attention to detail, and confident use of both hand and power tools., • A key part of the role involves working with UPS (Uninterruptible Power Supply) systems, including installation, commissioning, diagnostics, and ongoing maintenance. You will support mission‑critical environments where power reliability is essential to protecting IT and electrical infrastructure., • Professionalism, safe working practices, and high‑quality workmanship are essential. Working Environment: This role supports operations closely aligned with Salicru Electronics S.A., a leading Spanish manufacturer of advanced Power Electronics Systems. These include UPS systems, DC rectifiers, inverters, voltage stabilisers, and power conditioners. This partnership enables delivery of a fully integrated, mission‑critical power protection service to a broad client base. The organisation is recognised for exceptional service and reliability, with customers including: • Large blue‑chip companies., • Local and central government bodies., • MOD facilities., • NHS Trusts and Ambulance Services., • Utilities providers., • Many M&E contractors. Key Responsibilities: • Install, commission, maintain, and repair UPS systems and related power support equipment., • Provide mechanical installation and site‑based support as required across domestic and commercial locations., • Diagnose and rectify faults with efficiency and professionalism., • Complete site surveys, risk assessments, and method statements where necessary., • Accurately complete job sheets, reports, and documentation., • Work collaboratively with engineers, contractors, and other project stakeholders. Skills & Experience Required: • NVQ Level 2 or above in a mechanical, technical, or building services discipline (essential)., • Proven experience working with UPS systems — installation, testing, maintenance, and fault‑finding., • Full UK driving licence (preferred/required based on your policy). Desirable Qualifications: • NVQ Level 3 in a relevant mechanical or electrical field., • Electrical awareness or UPS‑related certifications., • Experience in commercial and domestic environments., • Familiarity with power electronics, backup systems, or M&E environments

Project Test Engineer - Aerospace (Fuel Systems) Location: Titchfield, Hampshire Division: FMC UK (Aerospace) Overview Our Aerospace client in Titchfield is a global leader in fuel and air systems for both fixed‑ and rotary‑wing aircraft. With extensive on‑site testing capabilities and a strong engineering culture, they deliver high‑performance electro‑mechanical fuel system components across a wide range of aerospace platforms. With a move to a brand‑new purpose‑built facility underway, this is an exciting opportunity to join a growing and highly skilled team on a newly awarded project. They are seeking multiple Senior Project Engineers to join their New Product Introduction (NPI) team. This role is responsible for the design, development, verification and qualification of new fuel system components. You will act as a technical leader, customer liaison, and key contributor to the successful delivery of engineering projects. Key Responsibilities Technical Leadership & Project Delivery Act as the technical lead for assigned projects, ensuring delivery to specification, on time and within budget. Ensure customer requirements are fully understood and translated into compliant design solutions. Create and maintain detailed planning for engineering activities in line with programme schedules and stage‑gate processes. Provide technical leadership and direction to junior engineers and technicians. Lead and support failure investigations on fuel system components.Documentation & Technical Reporting Prepare and review technical documentation in accordance with company processes, including: Acceptance Test Procedures Development and Qualification Test Reports Specifications Test Schedules Coordination memos and meeting minutesDevelopment & Qualification Testing Define and direct development and qualification test programmes, including: Organising the manufacture of hardware and test fixtures Supervising and supporting test technicians and junior engineers during test activities Presenting test plans internally and to customersCustomer Engagement Act as the primary technical point of contact for customers. Maintain and develop long‑term technical relationships. Present at internal and external technical reviews.Continuous Improvement Support and contribute to cost‑out initiatives across the business. Identify opportunities for future R&D and emerging technologies.Qualifications & Experience Essential Degree in Mechanical, Electrical, Aerospace Engineering or a related discipline. At least 5 years' experience in a relevant engineering environment, ideally aerospace or another high‑technology sector. Strong technical and analytical skills (e.g., fluid dynamics, stress, electrical). Experience with New Product Introduction and product qualification. Ability to generate and review high‑quality technical documentation. Experience presenting at technical reviews with customers or internal stakeholders. Excellent verbal and written communication skills. Strong organisational skills and ability to work independently.Desirable Knowledge of fluid pumping technology. Experience with electro‑mechanical aerospace components. Strong interest in aerospace system technology.Other Requirements Right to work in the UK.Why Join Our Aerospace Client? Work on innovative, safety‑critical aerospace technologies. Lead and influence technically significant projects. Collaborate with highly skilled engineering teams

Control Panel Wireman Portsmouth | Full-time | £Negotiable | 6‑month contract (view to permanent) A specialist industrial automation company in Portsmouth is seeking an experienced Control Panel Wireman to join its control systems team. The business designs, builds, tests and commissions bespoke industrial control systems for manufacturing clients across the UK and globally, including pharmaceutical, biotech and other regulated industries. You’ll work on a wide variety of custom control panel builds and be involved across the full lifecycle – from assembly and wiring in the Portsmouth workshop through to on‑site installation and commissioning at customer facilities. The Role Assemble and wire industrial control panels and electrical enclosures to engineering drawings and schematics. Install electrical components including PLCs, drives, HMIs, relays, breakers and instrumentation. Carry out pre‑delivery inspection, testing and functional verification of completed panels. Support on‑site installation, commissioning and handover of control systems at customer sites across the UK. Fault‑find and troubleshoot electrical issues in both workshop and site environments. Update and red‑line electrical drawings to reflect as‑built configurations. Work in accordance with relevant safety standards, IET Wiring Regulations and customer‑specific requirements.About You Essential: Demonstrable experience in industrial control panel wiring and assembly. Confident reading and working from electrical schematics, wiring diagrams and GA drawings. Experience of on‑site installation and commissioning of electrical control systems. NVQ Level 3 in Electrotechnical Services or equivalent electrical qualification. Strong electrical fault‑finding and troubleshooting skills. High attention to detail and commitment to quality workmanship. Able to work independently and as part of a close‑knit engineering team.Desirable: Experience in pharmaceutical, biotech or other regulated manufacturing environments. 18th Edition (BS 7671) – current certification an advantage. Familiarity with Siemens, Beckhoff, Allen Bradley or Mitsubishi PLC/automation platforms. Experience updating electrical drawings (ProfiCAD, AutoCAD Electrical, EPLAN or similar). ECS Wireman/Panel Builder card. Experience with drives, inverters and motor control systemsTo find out more please contact Max Sinclair by applying or emailing (url removed)

Company Description BJF Group is a leading multidiscipline Main Contractor based across the UK, specialising in delivering high quality construction projects across various sectors priding ourselves of our reputation for excellence and attention to detail. Within our Facilities Management division, the Southwest Projects team plays a crucial role in the day-to-day delivery of reactive and preventative works across a diverse range of properties and systems within our client's sites - as an Electrician. Within the team, you will be expected to provide comprehensive repairs and maintenance to a range of commercial instillations. Position To support a period of expansion and new project wins, we are looking to appoint an experienced Electrician to use their working knowledge of electrical systems to complete a range of project works, predominantly focusing on DB replacements (both single phase and three phase) as well as EV charger installations, to include large CSA SWA cables into commercial feeder pillars - as well as the installation of metal containment systems and commercial lighting. This is a mobile role that will require you to be split across multiple sites across the South west of the UK, each project will typically last 2-5 days at a particular site and you will commute to the same site until the project is fully delivered, so you will not be expected to be mobile across multiple sites in one day etc... Requirements Level 3 NVQ in Electrical Installation (2357) Testing & Inspection (2391) 18th Edition Full Classroom Course & IET Wiring Regulations (7671) Full UK Driving License Desirables JIB Gold Card IPAF PASMA EV Charger install experience CompEx 01-04 Rewards Competitive Salary Annual Leave Entitlement: 33 days per annum (inclusive of bank holidays) Group Pension Scheme: Provided by Royal London to save for your future. Free Eyesight test: Specsavers Company Funded Health Cash Plan: helping you spread the cost of essential healthcare like, trips to the dentist. Remote GP Access: speedy access to a GP by telephone or online plus electronic prescriptions 24/7 EAP Service: free advice, counselling and support for you and your family whenever you need it. Discounted Gym Membership at more than 3,000 gyms across the UK. Better BJF Initiative: wellbeing and mental health champions readily available at work. Employee Referral Scheme: recommend a personal connection to us and claim a cash reward for their successful hire. We are an equal opportunities employer, and we welcome applications from all suitably qualified persons regardless of their sex; religious or similar philosophical beliefs; political opinion; race; age; sexual orientation; or, whether they are married or are in a civil partnership; or, whether they are disabled; or whether they have undergone, are undergoing or intend to undergo gender reassignment

At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Role Overview: TUV SUD are looking for a Shift Technician to join our team following continued business growth! Working as part of a team of technical technicians and engineers, the Shift Technicians will perform RF (Radio Frequency) testing within our brand-new state of the art test facility. This role will require the successful candidate to contribute to a rotating shift pattern to cover the demand for 24/7 testing. The shift pattern will involve rotating across two shifts (10am-10pm or 10pm-10am) on a 4 shifts on, 4 shifts off basis. Initial training will be delivered on a shift pattern of Monday-Friday, 37 hours per hour, 8:30am-5:00pm before transferring to the shift rotation after training. Duties and Responsibilities: • Being part of a team delivering test services as part of a 24-hour, 7 day shift pattern, undertaking RF test in accordance with harmonised test standards (the most common being ETSI and FCC), or customer specific test plans, within the RF test facilities at Octagon House., • Control and monitor the test equipment calibration status during testing., • Working with customers during attended testing., • Close liaison with the Project Manager to ensure work is carried out accurately and within the agreed timescales., • Accurate recording of results following company quality procedures and providing clear, concise communication at end of shifts. Essential Criteria: • Educated to NVQ level 3 in Electrical / Electronic Engineering or have hands on practical experience in an engineering environment, • Experience with RF test equipment like spectrum analysers or Oscilloscopes., • Motivated and enthusiastic., • Have a good understanding of IT systems such as Microsoft Word, Excel and Outlook., • Conscientious with good interpersonal and customer skills and commercial awareness., • Have proven ability of documenting results accurately., • Willing to work as part of a team on 24 hour / 7 day shifts performing radiated RF testing using automated test scripts., • Are able to access the site independently as public transport will not always be available due to shift patterns. Further information: TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance At TÜV SÜD, we have employees from more than 100 different countries collaborating together. People of different backgrounds, skills, and pursuing different life goals. Our strength comes from these countless and varied perspectives. We are committed to be an inclusive and diverse workplace by welcoming people of all backgrounds. We want Diversity & Inclusion (D&I) to be a foundation of our company and create an environment where all our employees can trust they will be treated with respect, regardless of gender, nationality, ethnic background, faith, beliefs, disabilities, age, sexual orientation, or identity. As such, our employees are expected to behave at all times in a manner consistent with TÜV SÜD Code of Ethics and Company values. We firmly believe embedding D&I in the heart of what we do will inherently contribute to the success of TÜV SÜD. Click here to find out more about Diversity at TÜV SÜD

Senior Systems Engineer - Maritime & Navigation Systems Full-time | Permanent | £60,000-£80,000 DOE Hybrid flexibility with onsite requirements About the Opportunity An industry-leading organisation specialising in advanced maritime navigation and mission systems is seeking an experienced Systems Engineer to join their UK engineering team. This company supports a wide range of vessels and platforms across defence and commercial markets, delivering cutting‑edge navigation, surveillance, and bridge system technologies globally. You'll join a collaborative engineering environment where innovation, problem‑solving, and professional development are at the heart of what they do. You must have the unrestricted Right to Work in the UK. Sponsorship is not available for this role. The Role As a Systems Engineer, you will be responsible for the technical design, integration, configuration and testing of complex navigation and maritime systems used on naval platforms and surveillance networks. This is a hands‑on technical role requiring strong communication skills and the ability to work independently while supporting wider project teams. Key Responsibilities Produce high‑quality technical documentation including requirements, design specifications, SoW, V&V documents, and interface descriptions Build, configure and test complete systems Maintain expert knowledge of existing products and provide guidance to service engineers on commissioning, diagnostics, maintenance, and repair Interpret and flow down system‑level requirements, ensuring alignment with CONOPS and architectural constraints Produce technical proposals in response to customer requirements Carry out installation, commissioning, and setting‑to‑work activities when required Support project managers and make informed technical decisions within contract scope Conduct fault diagnosis and system trials on customer sites or naval platforms (UK and overseas) Provide telephone and email technical support to customers and service partners Deliver operator and maintenance training as required Experience Required Strong systems engineering experience within marine electronics, navigation systems, radar, electronic charts, navigation aids, or steering control systems Hands-on experience building, configuring, and fault‑finding PC‑based systems and networks Competent user of DOORS, SVN, MS Office, Visio, JIRA Desirable Skills Configuration and testing of network infrastructure (switching, routing, encryption, VLANs, VMs, security) Knowledge of cyber standards relevant to naval environments (e.g. JSP440/604/490, NCSC guidance, NIST, ISO 27001) Understanding of naval systems integration standards Membership of a recognised engineering body (IET, INCOSE) Strong problem‑solving and analytical mindset Excellent communication and teamwork skills Passion for continuous learning and new technologies Personal Requirements Must have the Right to Work in the UK (no sponsorship available) Able to obtain SC security clearance Strong initiative, accountability, and technical judgement Education HNC, Degree or equivalent in Electrical & Electronic Engineering or similar technical discipline Benefits Competitive salary £60,000-£80,000, dependent on experience Company pension scheme 25 days annual leave + public/bank holidays Private medical insurance Life insurance On‑site parking Flexitime and the option for a nine‑day fortnight (average 37.5 hours/week) Professional development and training opportunities Cycle to Work scheme & tech salary sacrifice options Electric vehicle salary sacrifice scheme Holiday trading (5 days) Supportive, inclusive, and collaborative work environment How to Apply Please submit your CV (and optional cover letter) in response to this advert. Successful applicants will be required to undergo SC security clearance

We're recruiting for a technically skilled Technical Support Engineer to join a growing aftersales and service support function based in Portsmouth. This is an excellent opportunity for someone with an electro-mechanical background and experience supporting heat pumps systems who enjoys fault finding, technical problem solving and supporting engineers, installers, and customers. You will play a key role in delivering high-quality technical support, ensuring equipment performance, supporting commissioning activities and contributing to ongoing product and service improvements. As Technical Support Engineer, you'll provide remote technical assistance to customers and field service engineers, supporting installation, commissioning, servicing, and fault resolution across a range of heat pumps as well as heating, cooling and air handling equipment. You will also support warranty investigations, product testing, and technical training delivery. Main Duties Provide telephone and email technical support to customers and service engineers Diagnose faults and support troubleshooting of heating, cooling, and air handling systems Test and fault-find returned warranty items Configure and set parameters on spare parts prior to dispatch Support commissioning activities and communicate technical requirements to engineers Produce technical documentation and training materials Deliver product and aftersales training to customers and partners Assist with quality and compliance activities (ISO 9001:2015) Attend site visits when required to support technical investigations Skills & Knowledge Electro-mechanical technical background (HNC/HND or equivalent preferred) Experience supporting heat pumps, HVAC, or air handling systems Strong fault-finding and diagnostic skills Ability to read wiring diagrams, schematics, and technical manuals Competent testing electrical components and equipment Confident communicator — phone, email, and technical reporting Self-motivated with a proactive approach to learning and product knowledge Full UK driving licence Salary & Benefits £45-50K salary depending on experience Company pension 25 days holiday + bank holidays Training and development support Stable, supportive engineering environment Opportunity to work with advanced heating and cooling technologies TPBN1_UKTJ

We’re recruiting for a technically skilled Technical Support Engineer to join a growing aftersales and service support function based in Portsmouth. This is an excellent opportunity for someone with an electro-mechanical background and experience supporting heat pumps systems who enjoys fault finding, technical problem solving and supporting engineers, installers, and customers. You will play a key role in delivering high-quality technical support, ensuring equipment performance, supporting commissioning activities and contributing to ongoing product and service improvements. As Technical Support Engineer, you’ll provide remote technical assistance to customers and field service engineers, supporting installation, commissioning, servicing, and fault resolution across a range of heat pumps as well as heating, cooling and air handling equipment. You will also support warranty investigations, product testing, and technical training delivery. Main Duties Provide telephone and email technical support to customers and service engineers Diagnose faults and support troubleshooting of heating, cooling, and air handling systems Test and fault-find returned warranty items Configure and set parameters on spare parts prior to dispatch Support commissioning activities and communicate technical requirements to engineers Produce technical documentation and training materials Deliver product and aftersales training to customers and partners Assist with quality and compliance activities (ISO 9001:2015) Attend site visits when required to support technical investigations Skills & Knowledge Electro-mechanical technical background (HNC/HND or equivalent preferred) Experience supporting heat pumps, HVAC, or air handling systems Strong fault-finding and diagnostic skills Ability to read wiring diagrams, schematics, and technical manuals Competent testing electrical components and equipment Confident communicator — phone, email, and technical reporting Self-motivated with a proactive approach to learning and product knowledge Full UK driving licence Salary & Benefits £45-50K salary depending on experience Company pension 25 days holiday + bank holidays Training and development support Stable, supportive engineering environment Opportunity to work with advanced heating and cooling technologies

TÜV SÜD – A global leader in the field of testing, inspection, management system certification and product certification renowned for quality, integrity and technical excellence. Established more than 150 years ago in Germany, TÜV SÜD is a leading global provider of technical services with more than 28,000 highly skilled employees across 1,000 offices worldwide. TÜV SÜD offers a wide range of testing & product certification, inspection, auditing & system certification, training and knowledge services. We are a premium quality, safety, and sustainability solutions provider. TUV SUD is looking for an experienced Senior Engineer to join our Electrical Safety team based in Fareham, Hampshire. You will be responsible for helping clients to achieve CE marking, global market access and product compliance for a range of electrical devices. You will have good interpersonal skills, a confidence working face-to-face with clients in this customer facing role and an aspiration to progress as a Product Safety Specialist in a global compliance organisation. Main Duties & Responsibilities: • Carrying out electrical safety testing and design assessments at TÜV SÜD and customers sites., • Identification of compliance requirements and strategies with the ability to apply these using pragmatic and common-sense approach., • Conducting factory inspections., • Compilation of test summaries and reports in support of testing and certification activities., • Conducting peer reviews of documentation and reports., • Ensuring the quality and throughput of work and, that projects are delivered on time and within budget. Essential Criteria: • Educated to degree level (or equivalent) in Electrical/Electronic engineering, • Electrical safety testing experience, with knowledge of CE marking., • Good understanding of the IEC Operational documents including CTF process and Technical Committees., • Knowledge and understanding of Global Market Access requirements for electrical products., • Good understanding and hands-on experience of electrical/electronic circuits., • Knowledge of test laboratory quality and operating procedures., • IT skills using MS office suite of programs., • Confident with good interpersonal skills and a commitment to ‘get the job done’., • Comfortable working as part of a team and on own initiative., • Willing to work off-site at clients’ premises and occasional overseas trips., • Full driving licence., • Ability to work an ad hoc shift pattern to meet customers deadlines. Desirable Criteria: • Practical Experience within a test house environment., • Working knowledge of regulatory requirements., • Knowledge of global certification procedures.Knowledge of standards including 62368, (phone number removed) & (phone number removed)., • Experience in conducting CIG023 inspections. Further Information: TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD

We are looking for an experienced Electrical Testing Engineer to join the Operations Team in an established family-owned business in Leeds (LS11). The Role:Reporting to the Senior Testing Engineer; key responsibilities will be the testing, repai. Our client is a leading manufacturer and supplier of

Electrical Technician (Compliance Testing)Location: Chesham, High Wycombe + travel across Buckinghamshire, Bedfordshire, Hertfordshire & surrounding counties.

Position: Electrical Testing SupervisorLocation: Cambridge Modern, State-of-the-Art BuildingHours: Monday to Friday, 8:00am 5:00pmSalary: £46,000 per annumEmployer: Leading FM Service ProviderAn excellent opportunity has arisen for an experienced Electrical Testing Supervisor to join a leading Fa

Electrical Testing Engineer (Electrician)Location:Field-Based NationwideJob Type:Full-TimeAbout the Role:We are currently seeking a skilled and motivatedElectrical Testing Engineer (Electrician)to join our growing field-based team. Reporting to the Project Manager, you will play a key role in deliv

Job Title: Appointed person with Electrical TestingLocation: CheshireRate of pay: £290 p/day CIS. PAYE Options availableStart date: ImmediatelyWe are looking for an appointed person who holds their electrical testing qualifications for a commercial refurbishment project in Northwich, Cheshire.

A leading electrical services company is seeking a Full-Time Electrician in Greater London. Candidates must hold electrical installation qualifications, have a valid UK Driving License, and a proven track record in domestic maintenance.

A leading construction company is hiring an Electrical Tester for its Wolverhampton site. Responsibilities include surveying and certifying electrical installations, carrying out inspections and tests, and ensuring compliance with safety standards.

Servicing & Aftercare Electrical Testing Engineer. Carry out electrical inspections, testing, fault finding, repairs, and maintenance. City & Guilds 2391 - Testing & Inspection.

We are working with a extremely stable, global leading engineering organisation seeking an Electrical Testing and fixed wirer tester to carry out statutory inspections and electrical testing across a wide range of industrial and commercial environments (never domestic) in the London area. If you are

Perform fixed wire testing (Periodic Inspection & Testing) in accordance with BS 7671 IET Wiring Regulations. City & Guilds 2391-52 (Inspection & Testing) or equivalent testing qualification. EICR (Electrical Installation Condition Reports) and Fixed Wire Inspection & Testing across our client sites

As an Electrical PAT Testing Engineer, you'll be the backbone of our equipment maintenance and testing operations. Job Advertisement: Electrical PAT Testing Engineer. Are you an enthusiastic and skilled Electrical PAT Testing Engineer looking to make your mark in the vibrant world of Media, Entertai

The ideal candidate will possess strong fault-finding skills and electrical testing experience. A well-established maintenance provider in Greater London is looking for an experienced Electrical Maintenance Engineer with a minimum of 3 years of experience in reactive and planned maintenance. Essenti

Electrical Testing Inspection Ltd | Full time. Qualifications: Electrical installation qualification, City & Guilds 2391 (Inspection & Testing), and 18th Edition (2382). If you are tired of working for companies who do not look after and support you, want a more varied day which challenges and pushe

A leading engineering consultancy in Greater London is seeking an Electrical Testing and Fixed Wirer Tester to perform statutory inspections and electrical testing in industrial and commercial settings. Candidates should possess the 18th Edition and testing qualifications 2391 or 2394/2395.

A leading engineering company in the UK is seeking an Electrical Technician to support testing and fault identification for rolling stock. The role requires NVQ Level 3 in Electrical or Rail Engineering and offers £25 - £30 per hour. Candidates should possess strong electrical fault-finding skills

A leading compliance specialist company in the UK seeks qualified Electrical Test Engineers to join their dynamic team. This unique opportunity focuses on ensuring client safety and compliance within electrical systems, emphasizing a supportive and team-oriented culture.

An exciting and varied role for a Testing Engineer where you will carry out Electrical Condition Reports & the associated remedials plus planned & preventive maintenance of Fire Alarms, Emergency Lighting, Fire Extinguishers and PAT testing for a number of commercial clients, including Pubs, Restaur

The role requires a degree in electrical engineering and experience with electrical products, switchgear, and relevant standards.

This role involves installation, maintenance, testing, and fault finding on electrical systems. Candidates should have a minimum of 5 years' experience, hold a City & Guilds Testing and Inspection qualification, and possess a full UK driving licence. A reputable electrical contractor in Dacorum is l

Candidates should have a degree in electrical engineering and experience in testing and certification of electrical products.