Trabajos engineer technician en WiganCrear alertas

HGV / Trailer FitterWe are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance.Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK.This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems.Key Responsibilities • Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment., • Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults., • Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements., • Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear., • Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery., • Complete all maintenance records and inspection documentation accurately., • Ensure all work is completed safely and in accordance with company procedures and industry regulations., • Support breakdown response and emergency repairs when required., • Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules.About You, • Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role., • Relevant engineering qualification, apprenticeship, or time-served experience., • Strong understanding of HGV and trailer maintenance practices., • Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics., • Ability to diagnose faults and carry out repairs independently., • Knowledge of DVSA inspection standards and vehicle compliance requirements., • Welding and fabrication experience would be advantageous., • Strong attention to detail and commitment to safe working practices., • Full UK driving licence (HGV licence advantageous but not essential)., • Positive attitude with the ability to work both independently and as part of a team.What's on Offer, • Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week, • Long-term career stability within a well-established engineering operation., • Exposure to a varied fleet of HGVs, trailers, and specialist equipment., • Ongoing training and development opportunities., • Company pension scheme., • Life assurance and additional employee benefits., • Employee rewards and recognition programme., • Annual bonus schemeImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Reference: BBBH25632AKeywords: Graduate, Technical, Construction, Sheet Metal, Glazing, Aluminium, Steel, Engineer, CAD, AutoCAD, Draughtsperson, CAD Technician, Skelmersdale, Bolton, Wigan, Warrington, Liverpool, Chorley, St Helens. CAD Technician (Aluminium/ Steel/ Manufacture)£40,000 - £45,000

Keywords: Graduate, Technical, Construction, Sheet Metal, Glazing, Aluminium, Steel, Engineer, CAD, AutoCAD, Draughtsperson, CAD Technician, Skelmersdale, Bolton, Wigan, Warrington, Liverpool, Chorley, St Helens. Are you a CAD Technician with a background in AutoCAD looking for a role working design

Draughtsperson (Sheet Metal/ Fabrication)£40,000 - £45,000 + Training + Progression + Company benefitsSkelmersdale. Reference: BBBH25632Keywords: Graduate, Technical, Construction, Sheet Metal, Glazing, Aluminium, Steel, Engineer, CAD, AutoCAD, Draughtsperson, CAD Technician, Skelmersdale, Bolton,

We are seeking a highly skilled CAD Plant Engineer to join our growing team within our Transmission and Distribution division. You will be responsible for ensuring CAD output quality and consistency, managing drawing standards compliance, and applying your understanding of substation plant layout op

HGV Technician / HGV Mechanic Location: Trafford Park Salary - £25.20 p/hour (£52,758) Shifts: Night Shift - 4on4off (6pm to 6am) We are seeking a HGV Technician / HGV Mechanic for an industry leading client in Trafford Park. Our client is one of the most well respected in the HGV industry and a household name throughout the UK meaning there is plenty of progression opportunities for their team! If you are an experienced HGV Mechanic, HGV Technician, HGV Fitter, Commercial Vehicle Technician then get in touch today to find out more information about this opportunity. Duties: • Diagnose, repair, and maintain heavy goods vehicles (HGVs) to the highest standards of quality and safety., • Perform inspections, routine maintenance, and repairs on various HGV/Trailers., • Use your technical expertise to troubleshoot and resolve complex mechanical and electrical issues., • Collaborate with the team to ensure efficient workflow and exceptional service delivery., • Keep accurate records of work carried out and parts used, maintaining thorough documentation. Requirements: • NVQ Level 3 (will also consider time served applicants)., • Ability to use diagnostic tools and software, • Strong problem-solving skills If you are a motivated individual with a passion for career development, we encourage you to apply for this exciting HGV Technician opportunity. RSD Recruitment are a leading Recruitment agency specialising in the HGV industry including all aspects of HGV, Automotive, Motor trade, Engineering and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter JBRP1_UKTJ

If you have experience as a Security Systems Engineer, Fire Alarm Technician, Safety Systems Specialist, Security Maintenance Engineer, or Fire Safety Engineer, you might find this Fire & Security Engineer role particularly interesting. Are you an experienced Fire Alarm & Security Engineer looking f

If you have experience as a Security Systems Engineer, Fire Alarm Technician, Safety Systems Specialist, Security Maintenance Engineer, or Fire Safety Engineer, you might find this Fire & Security Engineer role particularly interesting. Are you an experienced Fire & Security Engineer looking for a n

Multi Skilled Technician Salary: £43,000 + Pension + Overtime Earnings 50k+ Location: Westhoughton Double Days Shift Pattern – Monday to Friday – Early Finish Fridays Reference: Jo7233/JP My client is a world leader in the FMCG retailer branded market and is extremely well established, with sites worldwide and over 60 years manufacturing experience. This highly respected manufacturer is looking to expand its engineering capacity and is adding to the engineering knowledge already within their current team. The company have built a reputation on the continual deliver to their blue chip clients; this is a fantastic opportunity to join an extremely secure group, within a well-respected worldwide organisation. Key Skills Apprentice Trained Engineer in Electrical/Mechanical Engineering Experience of PLC systems & Automated machinery * Understanding of PPM systems You will have served a minimum of a full apprenticeship in electrical or mechanical engineering and have experience working within planned and preventative maintenance schedules. There will be lots of fast moving automated machinery such as flow wrappers, automated box packaging robots, blueprint box erectors, high speed baggers, labelling machines, dicers, Ishida weighers, together with packaging and conveyor systems. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be h...

Job Title: Manufacturing Engineer Electrical Planner Location: Samlesbury On site We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: • Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met, • Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid, • Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: • HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role, • Experience and knowledge of Electrical processes, • Ability to interpret electrical drawings, standards and processes, • Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. Youll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, youll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-NB1 #LI-Onsite JBRP1_UKTJ

CNC Turner (Operating / Programming) £45,000 - £55,000 (OTE 60K) + Training + Days Only + Monday to Friday + Unlimited Overtime + Company Bonus Skelmersdale, Lancashire Are you a CNC Turner or similar with experience offline programming and turning long shafts up to 5m using steadies, looking for a stable days based role within a company who offer plenty of optional training on exotic materials whilst completing bespoke 1 of 1 projects? This company specialises in the manufacture of precision components for the Oil & Gas, Aerospace and Commercial industries, working with a range of blue-chip companies across the UK. Since their establishment, they have gone from strength to strength and are now looking to expand their production capabilities to keep up with ever increasing demand. In this role you will be setting and operating turning machines working from 2.5m in length as you work both autonomously and within a tight-knit team of Turners as well as liaising with senior leadership and other departments to ensure that production is completed in a timely manner. This is a site based, Monday to Friday role with optional programming training provided for the right candidates. This role would suit a CNC Turner with experience offline programming and working from 2.5m, looking for a days based, Monday to Friday role within a tight-knit company, offering stability and security as well as unlimited overtime increase your earnings. The Role: • Programming, setting and operating a variety of CNC machinery, turning up to 5m, • Monday to Friday, 8:00am - 4:30pm, • Overtime The Person: • CNC Turner or similar, • Full right to work in UK Reference Number: BBBH24184c Turning, Milling, CNC, Operator, Setter, Technical, Technician, Engineer, Engineering, Mechanical, Milling, Machine, Aerospace, Metal, Skelmersdale, Lancashire If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Apprentice Sales Engineer Summary of Role You will work within the main contracts sales and estimating team and will work alongside the Sales/Proposals manager. You will be working on new large projects such as office/commercial developments, infrastructure and data centres. Over the course of your apprenticeship, you will work with various members of the team being shown how to develop technical solutions for our customers, develop tender estimates and how to generate tender submissions. What you will be doing • Reviewing and responding to enquiries sent allocated to you including updating our CRM system Goldvision., • Reviewing and developing technical specifications and begin developing the proposal based on customer deadlines., • Reviewing customer specifications, drawings, bills of quantities and other project documentation to produce an accurate quotation., • Liaising with the design engineers, project management team and leadership to gain technical input into the quotation., • Analysing level of risk associated with financial, technical elements of the project., • Producing and submitting quotations to customers/clients., • Progressing submitted quotations to obtain client feedback & prepare win/loss KPIs and lessons learnt., • Professionally interacting with our customers either through email, telephone or site visits to further client satisfaction & increase sales opportunities. Skills, Qualities, and Experience (all essential): • Minimum of 5 GCSEs at grade 4 or above. A grade 5 in Maths is required for this role., • A creative approach with the ability to maintain and develop positive customer relationships., • Competent numerical skills., • Organisational skills with ability to meet deadlines and changing priorities., • Attention to detail and efficiency., • Proven IT skills with experience of MS office packages (essential) and aptitude to learn Autocad or Autocad view products., • Ability to work independently and autonomously as well as an effective team player in a close knit and highly successful team, • With training, develop the confidence to present proposals to clients face to face or remote (essential)., • A Full UK Driving Licence What you can expect in return • Competitive Salary, • 25 days holiday plus bank holidays, • Contributory company pension scheme, • Life Assurance, • 36.5 hours per week (Monday to Thursday 8.45 16.40, Friday 8.45 4pm) About the apprenticeship You will be studying towards a Engineering Maintenance Technician Level 3 Apprenticeship at Trafford College, WA14 5PQ When not studying, you will work alongside our experienced Engineers delivering a real project engineering role. You may be expected to travel to different sites within a geographical region. You will need to manage your time and commitments well to ensure that you are able to complete your assignments whilst delivering a highly valued role. In addition to developing your core skills, you will be expected to support and carry out additional activities across our projects and service delivery. This may include project site assessments, supporting project documentation, assisting with technical surveys, and contributing to project planning and coordination activities. These responsibilities will provide valuable hands-on experience across the full spectrum of project delivery while contributing to overall project success and will complement your technical development as you progress through the apprenticeship program Important Information: GRADES: You will be required to provide your GCSE Grades prior to selection for the Assessment Centre & Interview The assessment centre for this programme will take place on Thursday 16th July in Manchester • Role Start Date: September 2026 Note: You may be required to complete a DBS check, at either basic or enhanced depending on the location you will be working in. JBRP1_UKTJ

We are seeking an Engineering Technician to join us at our Manchester Dairy As an Engineering Technician you'll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Dairy) Manchester Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: • To ensure effective handover of information across shift, • Uses PMS to support prioritisation and problem solving (RCFA), • To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment, • To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data, • Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site, • Lead shift based problem solving where corrective actions aren't clear, • Working as ONE TEAM with First Line Response Technician, • Coaching of operators with asset care tasks, • Identify & implement Improvements, • Identify life cycle issues and raise these with possible recommendations, • Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix, • Use and support departmental 5s programmes for workshops and stores What we're looking for: • Recognised apprenticeship, • Experience within maintenance, • Manufacturing Industry Experience, • Mechanical/Electrical Biased, • ONC/HNC, • IOSHH / Nebosh - Desirable, • Electrical qualification, • Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you? • Competitive salary, • Generous annual leave allowance (276 hours), • Access to Muller Rewards Platform, • Long term career with a company that invests in you!, • Career development and defined pathways, • Onsite car park, • Supportive team environment, • Life assurance, • Pension scheme, • 5% annual bonus (company target dependant) At Mller, we're committed to creating an inclusive workplace where everyone feels they belong. We welcome applications from all backgrounds and encourage people to apply even if they don't meet every requirement listed. If you need reasonable adjustments at any stage of the recruitment process, please let us know - we're happy to support you. #hiring You can find out more about Mller and what it's like to work for us by clicking here Careers at Mller UK & Ireland JBRP1_UKTJ

Lighting Engineer (Full Time) £32,000 - £38,000 + Overtime + Healthcare + Progression + Company Benefits + Training Manchester Are you a Lighting Engineer with experience in corporate events, conferences, live productions, or similar environments, looking for a stable, full time position within a company at the forefront of their industry. This is a fantastic opportunity to join a highly respected live events organisation delivering innovative lighting production across corporate events, arena productions and hybrid experiences as they more than double their headcount in the last 5 years. The company offers ongoing training, excellent benefits, strong team culture and clear long-term progression opportunities. In this hands on role, you will design, set up and operate professional lighting systems across a wide range of events while collaborating with project managers, creatives and clients to deliver outstanding technical and visual results. Working on some of the most exciting projects in the area, including partnerships Hilton Hotels and the Co-Op Live Arena. This role would suit a Lighting Engineer looking for a permanent, full-time position within a company at the forefront of their industry. The Role: • Designing, rigging and operating lighting systems for live, corporate and hybrid events, • Interpreting lighting plots and adapting designs to different venues, • Maintaining, troubleshooting and preparing lighting equipment, • Liaising with clients, suppliers, venues and production teams, • Ensuring compliance with safety standards and industry best practice The Person: • Lighting Engineer or similar with a background in Live Events, • Commutable to Manchester Keywords: Event Lighting Technician, Lighting Engineer, Live Events Production, Event Lighting Design, Corporate Events Lighting, Manchester, Audio Visual, AV technician, Production, Lights, Programmer Reference Number:BBBH25289a If you're looking to join a practice that actively supports your professional growth and creative input, click 'apply now' to submit your latest CV. We are an equal opportunities employer and welcome applications from all suitably qualified candidates. The advertised salary is indicative and will be dependent on experience, qualifications, and skill set. Ernest Gordon Recruitment Limited operates as an employment agency for permanent roles and an employment business for contract positions. By applying, you accept our Terms & Conditions, Privacy Policy, and Disclaimers, available on our website. JBRP1_UKTJ

Service Engineer / Field Service Technician / Compressor Engineer required to join a global, market leading engineering manufacturer. The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment at customer sites across Northwest - Manchester and surrounding areas. Full product training provided. The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a field service background inelectrical or mechanical engineering such as compressors, filtration, HVAC, industrial refrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, hydraulics, pneumatics, robotics or transferable electro mechanical engineering equipment. Package • £30,000-£40,000 depending on experience, • Company van - door to door pay, • Company phone and laptop, • 25 days holiday + bank holidays, • Company pension + shares scheme, • Overtime, • Additional benefitsService Engineer / Field Service Technician / Compressor Engineer Role, • To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites across Northwest UK., • The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, air filtration and other compressed air products., • Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, filtration and other compressed air and pneumatic equipment across Northwest UK.., • Installing compressed air systemsinto all forms of the manufacturing industry., • Perform emergency breakdown fault finding and repairs on various compressed air equipment., • Commutable across the Northwest - Manchester and surrounding areas., • Liaise with various engineering departments.Service Engineer / Field Service Technician / Compressor Engineer Requirements, • Proven diagnostic skills on complicated electrical / mechanical engineering systems. Full product training provided., • Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Multiskilled Engineer / Mechanical Engineer / Electrical Engineer / M&E Engineer or similar., • The ability in maintaining good professional working relationships with existing and new customers., • Field servicing background in electrical or mechanical engineering such as compressors, filtration, HVAC, industrial refrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, hydraulics, pneumatics, robotics or transferable electro mechanical engineering equipment., • Good working knowledge of three phase electrics and controls is advantageous., • A technical engineering degree / qualification, apprentice trained, FGas or similar would be advantageous., • Willingness to travel and commute across the Northwest - Manchester and surrounding areas. JBRP1_UKTJ

Live Events Technician (Lighting) £32,000 - £38,000 + Overtime + Healthcare + Progression + Company Benefits + Training Manchester Are you a Technician with experience working within the Live Events industry looking to join the industry leaders of the north within a role working on some of the most exciting events, including Sky Bet sporting events and high end theatre performances? This is a fantastic opportunity to join a highly respected live events organisation delivering innovative lighting production across corporate events, arena productions and hybrid experiences as they more than double their headcount in the last 5 years. The company offers ongoing training, excellent benefits, strong team culture and clear long-term progression opportunities. In this hands-on role, you will design, set up and operate professional lighting systems across a wide range of events while collaborating with project managers, creatives and clients to deliver outstanding technical and visual results. Working on some of the most exciting projects in the area, including partnerships Hilton Hotels and the Co-Op Live Arena. This role would suit a Live Events Technician with lighting experience looking to join an industry leading business. The Role: • Designing, rigging and operating lighting systems for live, corporate and hybrid events, • Interpreting lighting plots and adapting designs to different venues, • Maintaining, troubleshooting and preparing lighting equipment, • Liaising with clients, suppliers, venues and production teams, • Ensuring compliance with safety standards and industry best practice The Person: • Live Events Technician, • Lighting experience Keywords: Event Lighting Technician, Lighting Engineer, Live Events Production, Event Lighting Design, Corporate Events Lighting, Manchester, Audio Visual, AV technician, Production, Lights, Programmer Reference Number:BBBH25289d If you're looking to join a practice that actively supports your professional growth and creative input, click 'apply now' to submit your latest CV. We are an equal opportunities employer and welcome applications from all suitably qualified candidates. The advertised salary is indicative and will be dependent on experience, qualifications, and skill set. Ernest Gordon Recruitment Limited operates as an employment agency for permanent roles and an employment business for contract positions. By applying, you accept our Terms & Conditions, Privacy Policy, and Disclaimers, available on our website. JBRP1_UKTJ

Keywords: Graduate, Technical, Construction, Sheet Metal, Glazing, Aluminium, Steel, Engineer, CAD, AutoCAD, Draughtsperson, CAD Technician, Skelmersdale, Bolton, Wigan, Warrington, Liverpool, Chorley, St Helens. Are you a CAD Technician with a background in AutoCAD looking for a role working design

Keywords: Graduate, Technical, Construction, Sheet Metal, Glazing, Aluminium, Steel, Engineer, CAD, AutoCAD, Draughtsperson, CAD Technician, Skelmersdale, Bolton, Wigan, Warrington, Liverpool, Chorley, St Helens. Are you a CAD Technician with a background in AutoCAD looking for a role working design

Welder Fabricator, MIG Welder, Fabrication Engineer, Fabrication Technician, Fabricator, Plater, Boilermaker, Fabricator Welder.

Job Title: Water Hygiene Engineer Location: Wigan, Greater Manchester Salary/Benefits: £26k - £35k + Training & Benefits Our client is seeking a reliable and experienced Water Hygiene Engineer to cover new commercial and public sector contracts across the North West of England. The ideal candidate will have a proven track record of undertaking pre-planned ACOP L8 compliance tasks, as you will be expected to work independently on site regularly. Our client is a growing and well-known name within the industry, who are known for providing excellent further training and development. In addition, they are offering attractive basic salaries and comprehensive benefits packages. Ideally, candidates will be based in: Wigan, Ashton-in-Makerfield, Leigh, Prescot, Warrington, Runcorn, Frodsham, Ellesmere Port, Birkenhead, Liverpool, Crosby, Formby, Southport, Bolton, Manchester, Chester, Oldham, Stockport, Bolton, Bury, Burnley, Blackburn, Preston, Chorley, Winsford, Macclesfield, Leeds, Huddersfield, Halifax, Bradford. Experience / Qualifications: • Track record working as a Water Hygiene Engineer, • It would be beneficial to hold industry-related qualifications (i.e. TMV Servicing, Cleans & Disinfections), • Will have a good understanding of ACOP L8 and HSG 274 guidelines, • Experience working across a range of premises, • Confident using IT software, • Good literacy and numeracy competencies The Role: • Attending a range of commercial, public sector and local authority premises to conduct routine ACOP L8 duties, • Showerhead disinfections, • Flushing on little used outlets, • Inspections, cleans and disinfections on storage tanks, • Acid descales, • TMV servicing and failsafe checks, • Routine water sampling and temperature monitoring, • Updating site logbooks, • Recording findings and works completed, • Representing the company in a professional manner Alternative job titles: Water Hygiene Technician, Legionella Operative, Water Treatment Engineer, Environmental Service Technician, Water Monitoring Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

We are currently recruiting for an experienced Mechanical Technician to join a well-established FMCG manufacturing operation in the Skelmersdale area. The role is working Days Monday - Friday. Salary is c£50,000 per annum (negotiable, depending on experience) plus 27 days' holiday and bank holidays, excellent pension, company bonus etc Duties for the Mechanical Maintenance Engineer: This is a hands-on days-based position supporting the ongoing reliability, maintenance, and performance of production equipment across a busy manufacturing site. The successful candidate will play a key role in planned maintenance activities, continuous improvement projects, and ensuring machinery operates efficiently with minimal downtime. Key Responsibilities Carry out planned preventative and reactive mechanical maintenance across site Support production teams with fault finding and breakdown resolution Assist in driving machinery reliability and continuous improvement initiatives Work with maintenance planning systems to manage and record engineering activities Ensure all work is completed in line with health & safety and quality standards Support contractor activities and assist with equipment installations and commissioning Mentor and support junior engineers and apprentices where required Maintain high workshop and housekeeping standards Candidate Requirements Completed a recognised mechanical or multi-skilled engineering apprenticeship NVQ Level 3 / City & Guilds or equivalent engineering qualification Previous experience within manufacturing, FMCG, heavy industry, or process environments Strong mechanical fault-finding and maintenance experience Experience working on automated production equipment, hydraulics, pumps, conveyors, rotating equipment, or similar machinery Ability to prioritise workloads and work independently or as part of a team Experience using CMMS/SAP systems would be advantageous What’s on Offer for the Mechanical Maintenance Engineer: Stable long-term opportunity within a successful manufacturing business Supportive engineering and operations team Ongoing training and development opportunities Competitive salary and benefits package Opportunity to contribute to continuous improvement and site performance initiatives How to apply: Please call Rebecca at Simply Recruitment Group or press APPLY NOW

Job Title: Trailer Technician Salary: £42,000 Hours: Monday to Friday, Day Shift (42.5 hours per week) Benefits: Company pension contribution + holiday entitlement About the Opportunity: An established commercial vehicle engineering business is seeking a skilled Trailer Maintenance Engineer to join its busy workshop operation in the Haydock area. Due to continued growth and an increasing workload, the company is looking to strengthen its team with an experienced technician who takes pride in delivering high-quality workmanship. This is an excellent opportunity to join a forward-thinking employer that invests in its people and offers long-term career stability within the commercial vehicle sector. The Role: Conduct routine maintenance, inspections and repairs on a variety of commercial trailers Identify faults and carry out corrective work efficiently and accurately Undertake preventative maintenance to minimise vehicle downtime Ensure trailers meet legal compliance and safety standards Assist with inspection processes and prepare equipment for statutory testing Complete job records and maintenance reports using digital systems Maintain a clean, organised and safe working environment Work collaboratively with colleagues to meet workshop targets and deadlinesThe Successful Candidate Will Have: Previous experience maintaining and repairing commercial trailers Strong mechanical aptitude and fault-finding abilities Understanding of workshop procedures and vehicle safety standards Relevant engineering qualifications are advantageous but not essential for experienced candidates Ability to manage workloads independently and prioritise tasks effectively A proactive and professional approach to work Good communication skills and attention to detailWhat's on Offer: Salary package of up to £42,000 depending on experience Full-time permanent employment with a stable and growing business Employer pension scheme contribution Paid annual leave Modern workshop facilities and equipment Opportunities for ongoing training and career progressionNext Steps: If you're an experienced commercial vehicle or trailer technician looking for your next challenge, apply today with an up-to-date CV for immediate consideration. All applications will be treated in the strictest confidence. The employer is committed to providing equal opportunities and welcomes applications from all suitably qualified candidates. INDSHW

HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Drainage Technician Location: Haydock Employment type: Full Time, Permanent Working Hours: Monday to Friday, with overtime opportunities available What’s in it for you… We believe in looking after our people, and it shows. When you join Ipsum, you’re not just taking a job — you’re starting a career with real support behind it.? 20 days annual leave plus Banks holidays Option to buy up to 5 additional holidays Group Personal Pension Plan Career development & progression with the opportunity to earn professional qualifications 24/7 access to a virtual GP? and Mental health support & counselling services? Cycle to Work scheme? Discount club - supermarkets, phone bills, gyms & more?! Life assurance cover? Long service recognition? Enhanced Maternity Pay Paid volunteering opportunities in your community? About the role… Working as a 2nd member of a team on a Unit specific to your role, visiting all types of clients — commercial, residential, industrial, rail, road, utility, etc. —?across the UK carrying out Asset Inspections. Teams generally consist of 2 members and you will be expected to follow instructions from the Engineer(s) on site as well as your Project Supervisor but also work under your own initiative where possible As a Drainage Technician you will… Operating the following equipment day to day based on specific role: CCTV Unit HGV Jetting Unit Jet Van Survey/Asset Van Patching or Lining Unit Ensure compliance with all aspects of Health and Safety, Quality and Environment Ensure Company policies are always adhered to. Ensure all site related incidents are reported to your Supervisor. Contribute and react swiftly to resolve problems before they escalate. Work closely with associated Engineers, ensuring all aspects of work are completed on site. Contribute towards producing high quality results, reports and feedback. Always establish good relationships and communication and resolve issues and early resolution of any potential problems. You need to be flexible too: we operate 24/7 so there will be early starts, weekend working and an out-of-hours working across the UK. About you… This role would suit someone who likes to work flexibly, our teams operate 24/7 so there will be early starts, weekend / and out-of-hours working and in return we really value and develop our colleagues. Having utilities knowledge is a bonus, but working within a customer service or focused environment is essential along with having worked in a health and safety focused environment. You will be self-motivated, professional and a team player! Our commitment to Equal Opportunities... We’re proud to be an equal opportunities employer. We welcome applications from all backgrounds and experiences, and we’re committed to building a diverse and inclusive workforce. Before applying, please review our Privacy Policy to understand how we process your data in line with GDPR. Next steps... If you’re interested in this opportunity, please apply or reach out to the Talent Team for more info

Asset Technician - (Maintenance Engineer) Reporting To: Maintenance Manager Shift Pattern: Various Patterns Available Role Summary: To proactively work as part of a multi-disciplined shift team to maintain all assets within the Operational areas to optimise the utilisation of the equipment and to deliver maximum volume at the right quality. Working closely with the Management team to provide pro-active maintenance and technical support to the operations and engineering team to optimise production output for your process area. Actively identify RCA (Root Cause Analysis) and bring the equipment back into service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Support coordination of the engineering team to provide proactive mindset and behaviors to minimize downtime on your process area. Ensure alignment with Engineering Lead and process area teams, supporting the training and development of equipment /process/area/ system, owners. Asset Technician - (Maintenance Engineer) Key Responsibilities: Demonstrate commitment to health and safety. Effective 2-way communication of health and safety, e.g., at Tier 1, Safety Habit discussions, Safety Habit Observations, Risk Triggers including dynamic risk assessments Knowledge of site hazards and controls, and compliance to permit process ensuring team are competent for activities and compliant to site Ways of Working Responsible for food safety and product quality as defined by regulatory, Kraft Heinz and local procedures. It is the jobholder’s responsibility to escalate any issues that might compromise food safety and product quality Leadership during emergency situations To deputise within control loops for the Engineering Leader, when required Carry out planned and preventative maintenance using either Electrical / Mechanical / Control System / Automation skill set To diagnose faults and to test, repair and maintain Mechanical / Electrical equipment Support site Reliability agenda: Identification of failure modes and trends, complete root cause analysis (RCA) processes and drive / deliver the agreed actions, define, and improve maintenance strategy for assets Ensure required spares are defined for each asset with correct specifications and adequate quantities. Ensure asset BOMs are correctly setup in SAP Identify life cycle issues and raise these with possible recommendations Proactive fault prevention and continuous improvement activity to deliver key maintenance KPI’s Provide support to and involvement in site Project and Change Initiatives as appropriate Generate shift report Report all maintenance tasks on SAP system as required and to the correct standard Support the planning, critical information collection, organising and execution of works Practice KHMS requirements and implement according to the standard Support the shift engineering team Ensuring close liaison with support departments to maximise quality and performance including Planning and execution of all maintenance tasks throughout the week Liaise and manage OEMs / Suppliers and Contractors as required Ability to deliver on the job training (knowledge transfer) to new / existing colleagues and apprentices Actively participate in tier meetings and execution of the daily / weekly plan Accountable for assessing all corrective notifications in a timely manner for area of responsibility, ensuring the JIB (job in a box) process is followed and all parts are correct Support the scheduling of maintenance work for the next week during the Weekly Planning Meeting Support the overhaul / EEM process for area of responsibility Lead and support the RCA of Breakdowns and the implementation of corrective actions to prevent re-occurrence when escalated Create SOP’s/SMP’s/OPL’s and train and sign off line team in maintenance activities Deliver innovation and continuous improvement to reduce downtime caused by maintenance and equipment failures Ensure maintenance schedules are updated with learnings from equipment failures to minimize unplanned plant downtime Ensure that SAP is being used effectively to develop a planned maintenance strategy. Support the development of the system within the engineering function Support the weekend maintenance and aligned engineers to ensure available hours of the engineers is utilised to its full extent Ensure effective handover is completed to key stake holders following completion of any maintenance works (QRMP) and Completion of the Weekend Maintenance plan Attend and participate in handover meetings to ensure effective handover of information Raise or approve required permits on shift for specific job tasks Provide technical support following escalation from craft on shift Expected Responsibilities and Required Skills: Flexible, resilient and committed with a right first time attitude Good oral and written communication skills Be able to communicate effectively at all levels and ensure communications are clear and understood Be able to engage and motivate teams when adapting and adopting change programs. Training and coaching capabilities Strong organizational and technical skills Ability to work with data and information Recognised Engineering qualification is essential, HNC/HND/degree desirable Develop skills and knowledge for personal development and overall continuous improvement A Methodical approach to fault finding to diagnose and repair faults on automation / electrical or mechanical, pneumatic and hydraulic systems in a timely manner Some knowledge TPM/Lean Manufacturing tools and techniques Competent on MS office software Siemens S5/S7 experience desirable but not essential (For Electrical bias) Location(s) Kitt Green Kraft Heinz is an Equal Opportunity Employer – Underrepresented Ethnic Minority Groups/Women/Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity and other protected classes

Network Engineer Placement Programme - No Experience Required Our training will help you kick-start a new career in Network Engineering We are recruiting for companies who are looking to employ our Network Engineer Traineeship graduates to keep up with their growth. The best part is you will not need any previous experience as full training will be provided. You will also have the reassurance of a job guarantee upon completion. Whether you are working full time, part time or unemployed, this package has the flexibility to be completed at a pace that suits you. The traineeship is completed in 4 easy steps, you can be placed into your first role in as little as 8-12 weeks: Step 1 - Online Training The first step is completing a selection of professional, accredited and industry recognised IT Support courses by CompTIA, Microsoft and Cisco. The training is delivered via multimedia rich video tutorials, presentations and quizzes through a portal that you study from home. You will also be assigned an expert tutor to help you throughout your training. Step 2 – Practical Training You will gain the practical experience by using our cutting edge Livelabs. Gaining hands-on experience is essential in today’s IT industry for both certifications and keeping up to date with new technologies. Theory is often not enough these days, companies require hands on practical experience to make sure you're job ready. Step 3 – Official exams You will then go on to sit the CompTIA A+ exams to give you the official certifications which will be recognised worldwide. The CompTIA A+ is the most commonly asked for certificate in entry level IT roles. Step 4 – IT Technician placement You will be placed into your first role as an IT Technician, with a great starting salary. You will need to gain two years experience in this role before you can progress into a Network Engineer role. While working as an IT Technician, we will release your second batch of training which is specifically designed to qualify you to move into the networking field. This will consist of online training, practical training and an official exam. Network Engineer Role Once you have completed all of the mandatory training in step four and have the required two years experience in the IT industry, you will be ready to move into your Network Engineer role. We have partnered with a number of large IT companies who have a massive shortage of qualified Network Engineers. At a one off cost of £1499, or 13 interest free monthly instalments of £130, this represents a great opportunity to start a rewarding career in IT and have a real career ladder to start climbing. If you are not offered a role at the end of the training we will refund 100% of your course fees. Read through the information? Passionate about starting a career in IT? Apply now and one of our friendly advisors will be in touch. ‘Please note that this is a training course and fees apply

HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

Position: Field Service Engineer / Service Technician / Generator Technician. The job description below will outline this position of: Field Service Engineer / Service Technician / Generator Technician.

Position: Field Service Engineer / Service Technician / Generator Technician Job ID: 958409 Location: Hampshire, Berkshire, West Sussex & Surrey (Home Based) Rate/Salary: £35,000 - £40,000 Plus Overtime (£50,000) Type: Permanent / Full Time Benefits: Van, Mobile, Laptop Competitive pay and be

CONTRACT VEHICLE TECHNICIAN – SWINDON Position: Vehicle Technician Location: Swindon Rate: £23. Per Hour (Outside IR35) CONTRACT VEHICLE TECHNICIAN – THE ROLE: We are currently looking for fully qualified Vehicle Technicians to work at our client’s workshop on an ongoing

CAD Technician Permanent Location – Lancashire Salary Per Annum Negotiable depending on experience A fantastic opportunity has arisen to join one of our long-standing clients, a highly respected company within the land and engineering surveying industry. This permanent position will involve wo

Maintenance Technician £29,120 - £31,512 per year Location: Surrey Hours: 40 hours per week, Monday to Friday Permanent | Full-Time Put Your Skills to Work Where They Truly Matter Are you a hands-on maintenance professional who takes pride in keeping buildings safe, functional, an

Field Service Engineer £35,880 per annum + Overtime + Company Van + Excellent Training + Progression + Benefits Homebased role, covering Regional patch Are you a Field Service Engineer, with a background working on generators, looking to join a leading UK company, with an excellent reputati

Are you a Service Engineer with experience working on diesel-powered equipment looking for a varied role split between workshop and field work, offering strong overtime earning potential, a company van with fuel card, specialist training on bespoke pumping systems and long-term progression within a

The successful Field Service Engineer will be a hands-on, versatile engineer with a blend of electrical, controls and mechanical skills rather than a pure controls specialist. Field Service Engineer – Automation – International – Home Based - Permanent – £50k base salar

Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations.Here, we believe in you and what you bring to the table.There are many opportunities for development and advancement.Every gesture, every s

RF Recruitment Consultancy LTD are recruiting a foot mobile multi skilled technicians to join a rapidly expanding organisation in London. These are the ideal opportunities for a multi skilled technician to join a brilliant business at an exciting time of their growth strategy. This Foot Mobile Multi

Role: Maintenance & Workshop Technician Location: Bolton Type: Permanent Hours: Days, Monday-Friday Salary: Up to £32,000 per annum depending on experience HRGO Recruitment are recruiting for a Maintenance & Workshop Technician to join a well-established manufacturing business in Bolton.

Are you an Electrically bias Maintenance Engineer looking for a career within the supply chain of the automotive industry? Would you like to be trained up in the maintenance of some brand new equipment and lines that is currently being installed onsite? Happy working in a clean room environment f

Field Service Engineer HVAC / Heat Pumps. The Role Field Service Engineer. Why this Field Service Engineer role stands out.

Control & Instrumentation Maintenance Technician - Power Generation. An opportunity has arisen for a Control & Instrumentation (C&I) Maintenance Technician to join a high-performing maintenance team supporting a large-scale power generation facility. Working as part of a multi-skilled maintenance fu

Facilities Maintenance Technician. Facilities Maintenance Technician.

Kerry is the worlds leading taste and nutrition partner for the food, beverage, and pharmaceutical industries.Working behind the scenes, every day we partner with customers to solve the worlds most complex food challenges with our range of differentiated ingredients, technologies, and people.We are

Regional Field Service Engineer - Commercial Catering Equipment. Regional Field Service Engineer. This is an excellent opportunity for a qualified engineer with strong gas and electrical knowledge to work across a varied customer base, servicing, maintaining and installing commercial kitchen equipme

Multi-Skilled Maintenance Technician. As a Multi-Skilled Maintenance Technician, you will receive:. As a Multi-Skilled Maintenance Technician, you will assist continuous smooth running of the manufacturing plant, your duties with include (but not limited to):.

Contributes to an exceptional resident experience alongside the Community team and Estates Management team through the provision of a high standard of repairs, maintenance tasks, planned and unplanned works and statutory compliance of the building fabric and mechanical and electrical systems.Inspect

PAYE ONLY Duration: 4-16 weeks Provide technical and engineering support for project activities, equipment deployment, and operational startup phases. Adapt to changing project requirements and support a range of operational and engineering activities when required.

We are looking for a Highly skilled and proactive Field Service Engineer to carry out both breakdown repairs (reactive maintenance) and Planned Preventative Maintenance (PPM) on loading bay equipment. Key Responsibilities for aField Service Engineer - Loading Bays.