Trabajos hnd en FarehamCrear alertas

JOB ROLE: SENIOR CIVIL ENGINEER LOCATION: FAREHAM SALARY: £50,000 - £55,000 plus excellent benefits Benefits: • Vitality healthcare, • salary sacrifice scheme for annual leave, • 24 days holiday plus bank holidays increasing with service, • Bonus of 10% if targets are achieved, • Overage bonus, • Bike to work scheme, • working from home 2 days a week if desired, • flexible working hours around core hours of 10 - 4, • parking on site Our client a fast growing and award winning consultancy is looking to add to their team a Senior Civil Engineer. Qualifications required for the Senior Civil Engineer post. • Preferred: Incorporated Engineer (IEng) [or working towards] with the Institution of Civil Engineers, • 5+ years’ consultancy experience,, • Experience working with local authorities, developers and architects on civil engineering aspects of residential, commercial and retirement/care schemes, • Varied experience working on schemes through the planning process; from pre-app through to condition discharge,, • Work within a Civil Engineering design team responsible for the design of drainage systems, highway layouts, and S278/S38 schemes,, • Work in a design office, with regular exposure to developers, architects and local authorities., • Undertake and manage team resource for design work for;, • Drainage systems in accordance with Sewers for Adoption, building regulations and the SuDS Manual., • On and off-site highway features, in accordance with the appropriate standards and codes e.g. Design Manual for Roads and Bridges, and Manual for Streets, • Be responsible for writing fee proposals,, • Proficient in AutoCAD and Site 3D or equivalent 3D software,, • Have knowledge of and willing to learn other engineering software,, • Reviewing of junior team members reports, design and drawing work,, • Attend client meetings and site visits,, • Co-operate with the Quality Management System (QMS) through undertaking administrative activities, • Mentoring and training of junior staff We receive a high number of applications on a daily basis so we can only respond to successful applications. If you do not hear from us within 3 working days please assume your application has not been taken forward on this occasion. We may contact you in the future about other suitable positions. Real Recruitment Solutions place an obligation upon all staff to respect and act in accordance with this policy and consistently review regulations to ensure our policy is updated and relevant across all aspects of recruitment in order to avoid unlawful or undesirable discrimination.

Your new companyOur client are a specialist facilities service provider who deliver services to a commercial portfolio spanning the UK. They are hiring a Project Manager to join their team to drive the delivery of billable work project programmes across a number of sites in Hampshire, based from Fareham.Your new roleAs Project Manager, you will be responsible for driving projects to completion, assessing and mitigating risks, and ensuring successful execution. You will oversee the delivery of Billable Works in compliance with government regulations, statutory requirements, and health and safety policies.You will manage and monitor Supply Chain teams, ensuring qualified professionals are assigned to tasks that meet safety, quality, and performance standards. Reviewing Risk Assessments and Method Statements will be a key responsibility to maintain high safety and compliance levels.Collaboration will be central to your role. You will work closely with client representatives, local customer service teams, and site managers to agree on project scope, priorities, and timelines. Progressing tasks end-to-end through the Maximo system and ensuring timely completion of project documentation, including SharePoint uploads, will be part of your day-to-day responsibilities.Your role will also involve supporting end users and management in providing effective solutions to customer requirements, with a particular focus on supporting the client's carbon reduction targets. You will play a key role in resolving customer issues and ensuring complaints are addressed in a timely and satisfactory manner.You will be responsible for managing project costs, ensuring stakeholder expectations are met through sound commercial decisions, and maintaining value for money. Collaborating with all stakeholders, you will help mitigate contract risks and ensure work plans and budgets align with operational needs.What you'll need to succeedTo succeed in this role, you will require demonstrable experience in project management delivering construction, refurbishment and engineering works. You will also require: • HND or equivalent in building/civil engineering, Electrical/Mechanical Engineering, or similar, • APM, RICS, MCIOB or similar, • Asbestos RP, Legionella RP, or AP training desirable, however not essential, • Experience in project management, including leading teams, stakeholder management, cost control, and operational planning., • Experience in supervising site operations, managing work priorities, and driving performance improvements., • Up to £50,000 starting salary, • Company car / car allowance, • 25 days leave + bank holidays, • Private medical cover, • 6% matched pension contributions Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Project ArchitectLocation: PortsmouthSalary: £40-45,000 DOE I'm working with an award-winning architectural practice to recruit a Project Architect for their collaborative studio in Portsmouth. With over 30 years of experience, the practice has built a strong reputation for delivering high-quality projects across the South of England, covering residential, commercial and heritage sectors. Benefits Friendly and collaborative studio culture Opportunity to work alongside experienced directors and senior professionals Exposure to projects from concept through to completion Genuine scope for career progression within an expanding practice* Flexible and supportive approach to working Key Responsibilities for the Project Architect Lead architectural design and delivery across residential, commercial and heritage projects Manage projects across multiple RIBA stages, ensuring design quality and technical accuracy Prepare and coordinate planning applications, building regulations submissions and construction information Collaborate with consultants, clients and contractors to ensure efficient project delivery Maintain compliance with current UK Building Regulations and technical standards Mentor and provide guidance to junior team members About You Degree or HNC/HND in Architecture, Architectural Technology or a related field Proven experience working as a Project Architect within a UK architectural practice Strong track record of delivering projects across a range of RIBA stages Proficient in Revit, AutoCAD and Adobe Creative Suite Comprehensive knowledge of UK Building Regulations and construction detailing Excellent communication and coordination skills* Well organised, proactive and confident in managing your own workload To apply, please call Sophie on or alternatively, send your CV and Portfolio across to . I look forward to hearing from you soon.

CMS2 is a specialist equipment manufacturer supplying maritime atmosphere control systems and support services. CMS2 are experts in enabling high availability atmosphere management systems to generate breathable air for submariners, allowing boats to remain underwater for long periods of time. We do this by combining over sixty years of expertise with the latest technology and processes to design, build and support high quality systems and solutions. We are seeking a Test & Commissioning Engineer to join our established team. They will be responsible for developing and executing test plans, procedures, and automated test systems to verify the performance, functionality, and reliability of CMS2’s products and systems. This role involves close collaboration with design, manufacturing, and quality teams to ensure that all products meet technical specifications and regulatory standards. The Test Engineer plays a key role in identifying defects, improving test coverage, and supporting continuous product improvement. Key Responsibilities • Develop and execute test plans, test cases, and test scripts for hardware and/or software systems, • Collaborate with engineering teams to define test requirements and improve product quality, • Set-up, configure, test, commission and maintain complex process equipment, • Pressure testing, • Electrical testing, • Performing pre-commissioning checks, functional testing, and performance validation of equipment in Portsmouth and on site if required., • Perform hydrostatic and pneumatic pressure tests on mechanical components, piping systems, and plant assemblies in accordance with engineering specifications and safety regulations., • Carry out, flash testing, Insulation Resistance testing, earth bonding, point to point wiring checks, • Carrying out activities in line with the company’s test procedures., • Investigating mechanical/electrical/electronic/functional problems to assist with diagnosing and repair of faults., • Work with engineering and technical staff to develop new and existing equipment., • Document test results, track defects, and support root cause analysis., • Ensure documentation and test results are recorded consistently and accurately., • Document test results, track defects, and support root cause analysis., • Run system demonstrations with customers., • To control and maintain professional standards within the test areas., • To record and analyse data being captured within the test environment., • Ensure Health, Safety, Environment and Quality requirements are adhered to at all times, • To maintain professional standards within the shop floor / test bay areas. General activities: • Carry out any other ad-hoc duties as required to support the needs of the business., • Provide a professional backup service for colleagues during peak times or during absence., • Follow company procedures, standards and regulatory requirements., • Maintain continuous professional development to ensure knowledge is up to date., • Act as an ambassador for the company in all interactions with customers and the public. Skills, Knowledge and Expertise Essential: • NVQ/HNC or above qualification in engineering, • Previous test & commissioning experience in a highly regulated industry (process engineering), • Strong commitment to health and safety, environment and quality, • Ability to read and interpret documents such as process engineering drawings, specifications and procedures, • Able to use basic test equipment such as, multimeter, Loop calibrators, oscilloscope., • Good hands on electrical / mechanical skills, • Pragmatic approach to tasks, • Must be able to work efficiently as part of a team and to work under pressure in a challenging environment, • Excellent attention to detail, • Flexibility, enthusiasm, self-motivated and able to work well under own initiative Desirable: • IOSH Working Safely, • Apprenticeship in relevant engineering field, • HND/Degree qualified in engineering, • Previous experience within a manufacturing and defence environment, • Shipbuilding / Ship Repair background within the MOD / Naval Industry, • Familiar with NPI / NPD, • Experience of air purification equipment on-board submarines highly desirable, • Able to forge strong working relationships both internally and externally, • IOSH Managing Safely, • 5S / LEAN continuous improvement Other Requirements Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to Security Check level or be able to obtain this level. To gain SC clearance you will normally have had to have been a resident in the UK for a minimum of 5 years. Travel Requirements Some travel to other Group offices in the UK may occasionally be required. Benefits At CMS2, we believe in rewarding our people and supporting their well being. Alongside our competitive salaries we offer a comprehensive benefits package including, Company Profit Share Scheme, Generous Holiday Allowance with the ability to buy and sell holiday and more.

Building Services Engineer Location: Portsmouth or Stevenage Rate: £40 per hour (Umbrella) Contract: 12 months initially Hours: 35 per week (4.5‑day week) Security: SC Clearance (BPSS+) About the Role We’re looking for an experienced Building Services & Fabric Clerk of Works to carry out inspections, quality checks, and compliance oversight across Mechanical, Electrical, and Fabric installations on a range of high‑profile projects. You’ll act as the technical eyes and ears on site — ensuring every installation meets the highest standards of quality, safety, and design compliance. This is an exceptional opportunity to work in a secure and technically varied environment, where your work directly improves the safety and performance of critical buildings. Key Responsibilities • Conduct regular inspections of HVAC, plumbing, electrical, fire systems, controls, structure, and building fabric, • Ensure compliance with drawings, specifications, Building Regulations, H&S legislation and industry best practice., • Identify, document, and support the resolution of defects and non‑conformances., • Maintain clear daily records, photos, logs, and produce weekly/monthly reports, • Verify materials and workmanship against required standards., • Attend site and technical meetings, providing professional technical input., • Ensure all handover documentation (O&M manuals, as‑builts, Safety Files, commissioning records) is accurate and complete. What We’re Looking For Essential • Experience as a Clerk of Works, Site Inspector, or similar building services quality‑focused role., • Strong knowledge across Mechanical, Electrical, and Building Services systems., • Experience in construction site management and quality control., • Ability to read/interpret engineering and architectural drawings., • Excellent communication and report‑writing skills., • Competent using Google OS, AutoCAD, and relevant software., • Organised, proactive, diplomatic, and able to work independently., • Full UK driving licence., • HNC/HND, Degree, or City & Guilds in Building Services, Mechanical/Electrical Engineering, Construction, or similar field Desirable • Membership of ICWCI., • NEBOSH or similar H&S qualifications Why Apply? • £40 per hour umbrella – strong contract rate., • 12‑month initial contract with potential extension., • Secure, stable environment requiring SC‑level clearance., • Technically varied role covering all aspects of M&E and fabric., • Excellent work‑life balance with a 4.5‑day week., • Make a meaningful impact ensuring high‑quality, compliant, safe installations. How to Apply If you’re an experienced Clerk of Works or Building Services professional who takes pride in delivering high standards and wants to work on impactful, technically engaging projects — we’d love to hear from you.

Ocean Systems Technician Ocean technology – instrumentation, systems & field-ready equipment Salary: £32–35k + benefits + 25 days holiday | flexitime available Location: Port Solent Marina, Portsmouth, UK (primarily workshop-based, with exposure to field operations) About RS Aqua RS Aqua is a UK ocean technology business supplying advanced scientific, survey and subsea systems to ocean research organisations, industry and government. We work at the intersection of ocean science, marine engineering and real-world operations, supporting everything from coastal monitoring and offshore projects through to defence and autonomous systems. Our work is practical, technical and outcome-focused. Equipment we prepare and support is deployed in challenging environments, where accuracy, reliability and trust matter. RS Aqua is part of General Oceans, a global group of ocean technology companies delivering advanced sensors, platforms and systems worldwide. The Role This is a hands-on technical role within our engineering and technical support team, focused on preparing, calibrating and supporting oceanographic instrumentation used in real deployments. We are particularly interested in candidates who understand how equipment is actually used in the field — whether through time at sea, offshore work, survey operations or environmental monitoring. You will work on instruments and systems deployed on vessels, moorings, subsea platforms and coastal sites, ensuring they are accurate, configured correctly and ready for operational use. This is not just a workshop role. You will be expected to understand: • how systems behave in real environments, • how sensors, loggers and telemetry integrate, • how data is captured, validated and used There will be opportunities to support field trials and operational deployments, including work on vessels or coastal sites. This may involve preparing and operating systems such as buoys, seabed landers, robotic and autonomous platforms, and supporting real-world data acquisition. This is not a core requirement of the role, but it provides valuable exposure to how systems perform in operational environments. You will have some direct interaction with customers and key suppliers. Technology Focus You will work across a range of deployment-driven systems, including: • Water quality and oceanographic sensors (e.g. conductivity, temperature, depth, dissolved oxygen, optical sensors), • Data loggers and acquisition systems, • Instrument configuration and control software, • Telemetry and communications systems, • Subsea and environmental monitoring platforms Key Responsibilities: • Calibrate and verify oceanographic and environmental instruments to defined standards, • Perform fault finding, servicing and minor repairs on instrumentation and subsea systems, • Configure instruments and supporting software (firmware, interfaces, system setup), • Prepare, configure and test equipment prior to delivery and deployment, • Support integration of sensors, loggers, telemetry and associated software systems, • Maintain accurate calibration records and certification (ISO 9001 aligned), • Assist with workshop and warehouse operations (goods in/out, packing, inventory control), • Provide technical support to internal teams and customers, • Troubleshoot system behaviour and data issues from real-world use, • Contribute to continuous improvement of processes, systems and technical capability Experience & Background We are open to candidates with practical engineering or technical backgrounds. What matters most is hands-on capability and attention to detail. This role is particularly well suited to someone who has seen equipment used outside the lab or workshop. Relevant experience could include: • Oceanography, marine science or environmental monitoring, • Offshore, survey or vessel-based operations, • Current or former Armed Forces personnel with relevant technical, engineering or operational experience, • Working with deployed instrumentation (moored, mobile or subsea systems), • Instrumentation, electrical or electronic engineering, • Technical service, workshop or field-based roles Qualifications could include BTEC, HNC/HND, degree, NVQ, or equivalent practical experience. Right to Work / Checks • Applicants must have the right to work in the UK (no visa sponsorship available), • All staff are required to complete Baseline Personnel Security Standard (BPSS) checks How to Apply Please submit your CV and send a short covering email to FAO the Technical Director, outlining: • your relevant technical experience, • any exposure to ocean, marine or field-based systems (if applicable), • your interest in ocean instrumentation and technical services

CMS2 is a specialist equipment manufacturer supplying maritime atmosphere control systems and support services. CMS2 are experts in enabling high availability atmosphere management systems to generate breathable air for submariners, allowing boats to remain underwater for long periods of time. We do this by combining over sixty years of expertise with the latest technology and processes to design, build and support high quality systems and solutions. We are seeking a Test and Instrumentation Engineer to join our established team The Test and Instrumentation Engineer will provide the testing of CMS2’s air purification equipment to the highest of quality and in accordance with the company procedures, customer standards and regulatory requirements. Key Responsibilities: • The Test and Instrumentation Engineer will provide the testing of CMS2’s air purification equipment to the highest of quality and in accordance with the company procedures, customer standards and regulatory requirements., • Integration of test instrumentation, • Interface benchtop instruments (oscilloscopes, power supplies, signal generators) with automation platforms., • Data acquisition and analysis, • Configure DAQ systems for data capture to compile test information to formulate baseline information., • Continuous improvement, • Optimise test cycle times, improve reliability and implement error proofing techniques for automated test processes., • Contact for Test & Instrumentation activities on the full range of CMS2 key products and provide a pro-active and hands-on approach to the test, and fault diagnosis for CMS2 equipment on and off site., • Develop and maintain in house automated test equipment that will enhance the timings and effort required on day-to-day testing., • Conduct thorough testing and validation of electrical automation systems, ensuring compliance with design specifications, safety standards, and performance requirements., • Carry out, flash testing, IR testing, earth bonding and point to point checks., • Investigating mechanical and electrical problems, diagnosing and repairing faults where appropriate., • Use benchtop test equipment such as oscilloscopes, counter timers, multimeter, earth testers, IR testers, meggers etc…, • Understanding the need for use of ESD equipment when working with certain components., • Ensure documentation and test results are recorded as required., • Feedback to the engineering team with any design or maintenance issues that have occurred throughout the test phase., • All to be carried out in accordance with company test procedures. Secondary tasks: • Perform hydrostatic and pneumatic pressure tests on mechanical components, piping systems, and plant assemblies in accordance with engineering specifications and safety regulations., • Run factory acceptance tests (FAT’s) with the customer present. Demonstrate how our equipment works from mechanical, electrical and a chemical process side., • Time allocation:, • 20% (Equal to 1 day per week) – To be focus time on automating test procedures for more efficiency within the department., • 80% (Equal to 4 days per week) – To be focused on Test and instrumentation work. General activities: • Carry out any other ad-hoc duties as required to support the needs of the business., • Provide a professional backup service for colleagues during peak times or during absence., • Follow company procedures, standards and regulatory requirements., • Maintain continuous professional development to ensure knowledge is up to date., • Act as an ambassador for the company in all interactions with customers and the public. Skills, Knowledge and Expertise Essential: • NVQ/HNC qualification in engineering, • Apprenticeship in relevant engineering field, • Previous test & commissioning experience in a highly regulated industry (process engineering), • Strong commitment to health and safety, environment and quality, • IOSH Working Safely, • Ability to read and interpret documents such as process engineering drawings, specifications and procedures, • Good hands on electrical / mechanical skills, • Pragmatic approach to tasks, • Must be able to work efficiently as part of a team and to work under pressure in a challenging environment, • Excellent attention to detail, • HND/Degree qualified in engineering, • Previous experience within a manufacturing and defence environment, • Shipbuilding / Ship Repair background within the MOD / Naval Industry, • Familiar with NPI / NPD, • Experience of air purification equipment on-board submarines highly desirable, • Able to forge strong working relationships both internally and externally, • IOSH Managing Safely Other requirements: Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to Security Check level or be able to obtain this level. To gain SC clearance you will normally have had to have been a resident in the UK for a minimum of 5 years. Candidates must be able to obtain a basic security check which will normally require you to have been resident in the UK for at least 3 years.

Bennett & Game are representing a fast-growing and award-winning Civil, Structural and Transport Planning consultancy. They are looking to employ a Principal and Senior Civil Engineer to join their expanding team. With a diverse client base ranging from local businesses to national housebuilders, commercial developers, regional contractors and local authorities, this is a role that promises genuine variety and responsibility. Their work covers a broad range of sectors including residential, commercial and care-related developments, with involvement in large-scale schemes in the South of England. They contribute civil engineering input to planning stages and the design of associated on- and off-site infrastructure. The role offers exposure to complex projects from early feasibility through to delivery, within a consultancy environment that values technical quality, professional development and collaborative working. Salary & Benefits • Competitive salary - dependent on experience., • Quarterly bonus scheme of up to 10% of annual salary, with overage bonus if company targets are exceeded., • 5% employer pension contribution (Standard Life)., • Private healthcare through Vitality, including active rewards., • 24 days' holiday plus bank holidays, with your birthday off if it falls during the working week., • Holiday buy & sell scheme - purchase up to 5 extra days, sell up to 4., • Flexible hours (8am-6pm, core 10am-4pm) with the option of up to 2 days home working per week., • Funded professional membership., • Regular CPD, internal/external training and mentoring opportunities., • Employee Assistance Programme - 24/7 confidential support., • One annual paid community/charity day., • As a Principal or Senior Civil Engineer, you will:, • Work within a design team delivering drainage systems, highway layouts and S278/S38 schemes., • Undertake and manage resources for the design of:, • Drainage systems (Sewers for Adoption, building regulations, SuDS Manual)., • On- and off-site highways (DMRB, Manual for Streets)., • Manage civil engineering projects from planning through to detailed design, covering drainage, highways and external works., • Prepare fee proposals and manage project budgets., • Produce and review technical reports, designs and drawings, ensuring quality standards., • Use AutoCAD and 3D design software (Site 3D or equivalent) with willingness to expand into other packages., • Attend client meetings and site visits, liaising with developers, architects and local authorities., • Mentor and train junior staff, reviewing their outputs and supporting professional development., • Share knowledge and provide support across regional offices and departments., • Degree or HND in Civil Engineering., • Incorporated Engineer (IEng) or working towards with the ICE., • Minimum 5 years' experience in consultancy., • Experience with local authorities, developers and architects across residential, commercial and care/retirement schemes., • Varied experience delivering projects through the planning process (pre-app to condition discharge)., • Strong project management skills, particularly across drainage, highways and external works., • Proficiency in AutoCAD and 3D design software (Site 3D or equivalent)., • Strong written and verbal communication skills. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. JTRA1_UKTJ

Job Title: Electrical Engineer Location: Portsmouth, Onsite Salary: £42,000+ depending on skills and experience Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you’ll support the Royal Navy-led Refit Support Group (RSG) and Maintenance Support Unit (MSU) on Type 45 Destroyers, delivering electrical maintenance, fault finding, and defect rectification during upkeep periods. You’ll carry out daily UMMS tasks and Category ‘A’ maintenance across ship systems, support STOROB activities, and maintain accurate reporting on equipment condition. You’ll also ensure a safe working environment, fully complying with SHE policies and statutory regulations. Core duties: • Carry out daily UMMS tasks, Category ‘A’ maintenance, and STOROB activities, ensuring high-quality work within agreed timelines, • Maintain, monitor, and report on the material state of the ship, identifying defects and overseeing their analysis and rectification, • Apply engineering knowledge and sound judgment to solve technical problems and support decision-making processes, • Ensure full compliance with all SHE policies, procedures, and statutory regulations at all times, • Collaborate effectively with colleagues, contributing to team decisions and cross-trade activities, with training provided where needed, • Support, guide, and provide on-the-job training to team members, fostering skills development and operational excellence, • HNC/HND or equivalent experience in an engineering discipline This role is responsible for carrying out tasks to support the RN led Refit Support Group (RSG) and Maintenance Support Unit (MSU). The role will carry out daily UMMS tasks, CAT ‘A’ maintenance on various Type 45 equipment’s, including fault analysis, repair defects and carryout STOROB activities during Type 45 upkeep periods. The role maintains a safe working environment and ensures compliance with BAE Systems SHE policies and procedures A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what matters most to you and your family, supporting both your financial and personal wellbeing. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and be proud of the difference you make. Closing Date: 13th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-KP1 #LI-onsite

Job Title: Test Equipment Engineer – Hardware Location: Portsmouth Broad Oak. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: Up to £50,000 depending on skills and experience Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. Job Description: You will act as a Test Equipment Engineer, delivering comprehensive engineering support for the Spearfish test equipment used within the UK. With this role you will report into the Spearfish test equipment team leader. Daily activities to include maintaining high levels of equipment availability. Also improving and designing new test equipment while working collaboratively as part of the Spearfish Test Equipment Team and contributing to the wider Spearfish In-Service Support Group. Core Duties: • Diagnosing a wide range of complex Special to Type Test Equipment to component level where applicable with limited technical support, • Influence and deliver design obsolescence tasks, implementing new electrical hardware at Broad Oak and customer locations where required, • Lead and perform a range of development activities including producing design schemes, circuit diagrams, wiring schedules, design documentation, specification and other test process tasks, • Compile and approve Engineering Designs, Changes, Tasks and Concession actions, • Responsibility and ownership of a selection of in-service support and test equipment, • You’ll be qualified in a relevant Engineering or closely related discipline to HNC/HND/Degree level, • You’ll have a test equipment/hardware design background, • You’ll have experience within repair and investigation of test equipment You will work alongside an experienced team of 10 hardware and software engineers. Who report into will report to the Spearfish Test Equipment Team Leader who reports into the TRAM Engineering Manager. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 9th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-RB1 #LI-Hybrid

Job Title: Engineering Manager – Electrical Systems Location: : Barrow-in-Furness / Filton – (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs, also a requirement to visit other sites in the UK on a regular basis) We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Power team, you will be leading a multi disciplinary team of engineers, delivering Power Systems design and development and defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs.. This role will provide you with an opportunity to travel to various locations throughout the UK, including various BAE, customer and supplier sites. Core duties: • You’ll be leading & managing an engineering team to deliver the functional design and definition of Electrical Power Systems equipment, • You’ll be managing the processes and reviews of technical documentation & associated technical risks, assumptions and dependencies, • You’ll provide advice on electrical power technical aspects across a broad range of engineering disciplines, • You’ll be engaging with customers and suppliers to provide solutions to complex problems, • You’ll be taking a leading role by guiding the team through the systems definition process, • You’ll be providing leadership and mentoring of more junior team members to ensure the necessary capability and skills development Essential Skills: • Chartership or working (or prepared to work) towards, • Engineering degree or HND with substantial experience in Electrical Engineering design / development, • Experience of design / development of power systems (concept through to detailed design), • Significant knowledge of AC and DC electrical power systems, • Strong analytical and problem solving skills, • Team Leadership experience The Electrical Power Systems Definition Team: The Electrical Power Systems Definition team are working on the UK’s next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 4th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-KI1 #LI-Hybrid

Bennett & Game are representing a fast-growing and award-winning Civil, Structural and Transport Planning consultancy. They are looking to employ a Principal and Senior Civil Engineer to join their expanding team. With a diverse client base ranging from local businesses to national housebuilders, commercial developers, regional contractors and local authorities, this is a role that promises genuine variety and responsibility. Their work covers a broad range of sectors including residential, commercial and care-related developments, with involvement in large-scale schemes in the South of England. They contribute civil engineering input to planning stages and the design of associated on- and off-site infrastructure. The role offers exposure to complex projects from early feasibility through to delivery, within a consultancy environment that values technical quality, professional development and collaborative working. Salary & Benefits • Competitive salary - dependent on experience., • Quarterly bonus scheme of up to 10% of annual salary, with overage bonus if company targets are exceeded., • 5% employer pension contribution (Standard Life)., • Private healthcare through Vitality, including active rewards., • 24 days' holiday plus bank holidays, with your birthday off if it falls during the working week., • Holiday buy & sell scheme - purchase up to 5 extra days, sell up to 4., • Flexible hours (8am-6pm, core 10am-4pm) with the option of up to 2 days home working per week., • Funded professional membership., • Regular CPD, internal/external training and mentoring opportunities., • Employee Assistance Programme - 24/7 confidential support., • One annual paid community/charity day., • As a Principal or Senior Civil Engineer, you will:, • Work within a design team delivering drainage systems, highway layouts and S278/S38 schemes., • Undertake and manage resources for the design of:, • Drainage systems (Sewers for Adoption, building regulations, SuDS Manual)., • On- and off-site highways (DMRB, Manual for Streets)., • Manage civil engineering projects from planning through to detailed design, covering drainage, highways and external works., • Prepare fee proposals and manage project budgets., • Produce and review technical reports, designs and drawings, ensuring quality standards., • Use AutoCAD and 3D design software (Site 3D or equivalent) with willingness to expand into other packages., • Attend client meetings and site visits, liaising with developers, architects and local authorities., • Mentor and train junior staff, reviewing their outputs and supporting professional development., • Share knowledge and provide support across regional offices and departments., • Degree or HND in Civil Engineering., • Incorporated Engineer (IEng) or working towards with the ICE., • Minimum 5 years' experience in consultancy., • Experience with local authorities, developers and architects across residential, commercial and care/retirement schemes., • Varied experience delivering projects through the planning process (pre-app to condition discharge)., • Strong project management skills, particularly across drainage, highways and external works., • Proficiency in AutoCAD and 3D design software (Site 3D or equivalent)., • Strong written and verbal communication skills. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. JTRA1_UKTJ

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: * Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. * Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. * Own, document and train others on manufacturing process and standards. * Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Assess compliance and adhere to safety/quality standards. * Providing technical support for production and production control. * Developing, optimising and implementing factory floor layouts/production cells. * Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: * Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. * Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. JBRP1_UKTJ

Senior Civil Engineer Location: Fareham, Hampshire Hours: Monday to Friday, Flexible Opportunity with Core Hours Required Salary: Competitive - The above is illustrative only Holiday: 32 days including bank holidays, Increasing with length of service. Sector: Civil Engineering Our client is a well-established, multi-disciplinary consultancy specialising in transport planning, travel planning, and civil and structural engineering services. The business has grown steadily in recent years and now operates across the UK, supporting both public and private sector clients on a wide range of development and infrastructure projects. They are known for delivering practical, high-quality solutions from early feasibility through to detailed design and project delivery, with a strong emphasis on collaboration and client-focused outcomes. With an experienced and technically strong team, the company provides end-to-end support, combining commercial awareness with in-depth knowledge of current legislation and industry standards. Our client places a strong emphasis on communication, long-term relationships, and continuous improvement, underpinned by their core values of customer focus, openness, results, and excellence. They have built a solid reputation for delivering reliable and innovative engineering solutions that enable successful development across a diverse portfolio of projects nationwide. Position Duties • Develop and manage the creation of complex civil engineering designs for drainage, highways, and infrastructure schemes, • Project manage schemes from concept through to construction, ensuring timelines and budgets are met, • Work closely with local authorities, developers, architects, and other stakeholders throughout the project lifecycle, • Review and approve technical designs, drawings, and reports produced by the team, • Manage and allocate team resources to deliver multiple projects efficiently, • Mentor and train junior engineers, supporting their professional development and career progression, • Coordinate and manage specialist sub-consultants on projects, • Prepare fee proposals and support business development initiatives, • Attend client meetings, site visits, and project consultations, providing technical advice and guidance, • Ensure all designs comply with relevant codes, standards, and regulatory frameworks (e.g. Sewers for Adoption, SuDS Manual, DMRB, Manual for Streets), • Identify, evaluate, and implement engineering solutions, assessing their effectiveness across the project life cycle, • Monitor and manage project budgets, costs, and resources while maintaining commercial awareness, • Maintain and improve quality processes and contribute to continuous improvement initiatives, • Apply health, safety, and risk management principles in all design and project activities, • Degree or HND in Civil Engineering, • Preferably Incorporated Engineer (IEng), or working towards IEng with the Institution of Civil Engineers, • 5+ years' experience in a civil engineering consultancy environment, • Experience working with local authorities, developers, and architects, • Strong technical knowledge of civil engineering design (drainage systems, highways, S278/S38 schemes), • Proficiency in AutoCAD and Site 3D (or equivalent 3D design software), • Understanding of design standards (e.g. Sewers for Adoption, SuDS Manual, DMRB, Manual for Streets), • Experience across residential, commercial, and retirement/care schemes, • Experience managing projects through the planning process (pre-application to condition discharge), • Civil engineering project management experience, including schemes with drainage, external works, and highways elements, • Experience coordinating and managing design team resources, • Experience reviewing junior engineers' reports, drawings, and designs, • Experience attending client meetings and site visits, • Experience preparing fee proposals, • Experience contributing to business development and networking activities, • Ability to solve engineering problems using sound theoretical and practical approaches, • Project management skills, including planning, resource allocation, and delivery, • Commercial awareness, including budget management and cost control, • Knowledge of statutory, regulatory, and commercial frameworks, • Understanding of health, safety, and risk management in design, • Awareness and application of sustainable development principles, • 5-hour workdays with flexible working hours, with a core hour requirement allowing for lifestyle and work life balance, • 24 days annual leave, increasing with length of service plus 8 bank holidays, • Day off on your birthday if it falls on a working day, • One community or charity day a year to allow you to support the person projects you love, • Salary sacrifice scheme with the opportunity to purchase or sell annual leave days., • Christmas shut down, • Quarterly and yearly bonus schemes, offering the potential to earn more, • Private healthcare upon completion of probation period JTRA1_UKTJ

Bennett and Game are pleased to represent a leading civil and structural engineering consultancy seeking a Senior / Principal Civil Engineering Technician to join their expanding design team in Fareham. This is a key technical role offering long-term progression, exposure to complex development-led schemes, and the opportunity to take ownership of CAD standards and team mentoring across highways and drainage projects. Role Overview • Production and coordination of civil engineering drawings for drainage, highways and infrastructure schemes, • Design support on S278 and S38 works from concept through to detailed design, • Acting as a technical lead on CAD output, standards and drawing quality, • Mentoring and supporting junior technicians and engineers, • Working closely with engineers, local authorities, developers and architects, • Improving CAD processes, workflows and standard detail libraries, • Experience as a Senior or Principal Civil Engineering Technician, • Strong background in drainage and highway design within a consultancy environment, • Proficient in AutoCAD with working knowledge of Site3D (or equivalent), • Experience delivering S278 and S38 schemes, • Comfortable checking drawings and providing technical feedback, • Ability to manage workload across multiple projects, • Salary: £45,000 - £50,000, • Clear progression to Principal / Lead Technician level, • Quarterly company bonus scheme, • Private healthcare (Vitality) & 5% employer pension contribution, • Hybrid & flexible working (2 days WFH), • 24 days holiday + bank holidays + birthday off, • Funded professional membership & CPD opportunities, • Supportive 'family feel' culture with strong focus on work-life balance, • Involvement in complex, high-quality civil engineering projects, • Supportive team environment with mentoring responsibility We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. JTRA1_UKTJ

Trainer, Training, Instructor - Electrical Electronic Engineering Royal Navy Portsmouth, Hampshire Permanent SC Cleared Term Time working £39,000 to £41,000 pro rata + Large Co Benefits This is an outstanding opportunity for an experienced engineering professional to make a lasting impact by mentoring the next generation of Royal Navy engineers leveraging your career expertise without the need for prior teaching experience! Main Tasks & Responsibilities Trainer, Training, Teacher, Instructor, Electrical Engineering Delivering training to groups of up to 24 trainees in Electrical or Electronic engineering and machine principles Conducting practical lab sessions, demonstrating key principles and supervising trainee experiments Marking and check-marking assessments to ensure accuracy and consistency Maintaining and updating training materials with Training Design staff Essential Skills & Experience Trainer, Training, Teacher, Instructor, Electrical Engineering At least a Foundation Degree in Electronic or Electrical Engineering (or a related engineering discipline), or an HND/FdSc in Electronic or ...

Our client a building developer / contractor are seeking a motivated Assistant Quantity Surveyor to join their commercial team on a major residential development in Portsmouth. This is a key role supporting the financial management and delivery of a multi-phase housing project consisting of private housing and apartments. Key Responsibilities: * Assist with subcontractor procurement and payments * Support monthly valuations, cost reporting, and forecasting * Help manage budgets, variations, and cash flow * Attend site meetings and liaise with site and design teams * Maintain accurate records and assist with final accounts What We're Looking For: * 24 years experience in a Quantity Surveying role (contractor or developer side) * HND or Degree in Quantity Surveying or equivalent * Confident communicator, well-organised, with good commercial awareness * Proficient in Excel; experience with construction management software is a plus Whats on Offer: * Excellent career progression with a reputable regional contractor * Training and support from experienced surveyors * Long-term involvement in a landmark development * Competitive salary, car allowa...

Project Architect Location: Portsmouth Salary: £40-45,000 DOE I'm working with an award-winning architectural practice to recruit a Project Architect for their collaborative studio in Portsmouth. With over 30 years of experience, the practice has built a strong reputation for delivering high-quality projects across the South of England, covering residential, commercial and heritage sectors. Benefits * Friendly and collaborative studio culture * Opportunity to work alongside experienced directors and senior professionals * Exposure to projects from concept through to completion * Genuine scope for career progression within an expanding practice * Flexible and supportive approach to working Key Responsibilities for the Project Architect * Lead architectural design and delivery across residential, commercial and heritage projects * Manage projects across multiple RIBA stages, ensuring design quality and technical accuracy * Prepare and coordinate planning applications, building regulations submissions and construction information * Collaborate with consultants, clients and contractors to ensure efficient project delivery * Maintain compliance with current UK Building Regulations and technical standards * Mentor and provide guidance to junior team members About You * Degree or HNC/HND in Architecture, Architectural Technology or a related field * Proven experience working as a Project Architect within a UK architectu...

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: * Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. * Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. * Own, document and train others on manufacturing process and standards. * Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Assess compliance and adhere to safety/quality standards. * Providing technical support for production and production control. * Developing, optimising and implementing factory floor layouts/production cells. * Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: * Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. * Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Are you looking to join a successful and growing organisation who are committed to creating a great safe place to work where all employees have the opportunity to contribute, grow and develop? Portakabin are looking for a Design Specification Developer to join our business unit Darwin Group. Darwin Group deliver outstanding healthcare facilities for the NHS. As an experienced Design Specification Developer you will play a key role within the Design Engineering team, focusing on the development & continued improvement of standardisation for all modular solutions. This includes the creation, organisation, and distribution of a comprehensive technical library containing standard details, specifications, & manuals. The role supports all design teams by providing consistent, high-quality technical information & ensuring alignment with current construction methods & regulatory standards. Role Details: • Annual salary up ranging from £30,000-£40,000 dependent on skills and experience., • Annual on target bonus of up to 5%, • Role based: Telford, TF3 4NT or Shawbury SY4 4EA, • Contract type: Permanent, • Annual leave of 27 days per annum plus bank holidays, • Develop and maintain standard technical details for modular construction solutions., • Manage and update the technical library, ensuring all documents are current, accurate, and accessible., • Collaborate with suppliers, manufacturers, and contractors to validate and refine technical details., • Support all design teams by providing technical guidance and standardised detailing resources., • Ensure technical outputs align with current regulations, best practices, and company standards., • Participate in project reviews and lessons learned sessions to identify opportunities for improvement., • Assist in the coordination and integration of standard details into project-specific designs., • Maintain version control and documentation protocols for all technical resources., • Contribute to innovation and development initiatives within the engineering and design teams., • Site and factory visits in collaboration with construction/manufacturing teams to produce reports on how standardisation is being utilised and to highlight any improvements., • Assist with structural engineering design information as required, • The company reserves the right to vary or amend the duties and responsibilities of the post holder at any time according to the needs of the Company’s business., • Contributory pension including life insurance benefit, • A range of dedicated health and wellbeing services, • Learning & development opportunities and resources, • Opportunity for career progression, • HNC/HND or Degree in Architectural Technology, Construction, or related field, • Membership or working towards membership of CIAT or similar professional body is desirable, • Experience working with and developing technical details and specifications, • Strong understanding of modular construction methods and knowledge of building regulations and technical standards, • Effective communication and coordination with internal and external stakeholders, • Strong problem-solving and communication skills

Principal Civil Engineer Location: Fareham, Hampshire Hours: Monday to Friday, Flexible Opportunity with Core Hours Required Salary: Competitive Holiday: 32 days including bank holidays, Increasing with length of service. Sector: Civil Engineering Our client is a well-established, multi-disciplinary consultancy specialising in transport planning, travel planning, and civil and structural engineering services. The business has grown steadily in recent years and now operates across the UK, supporting both public and private sector clients on a wide range of development and infrastructure projects. They are known for delivering practical, high-quality solutions from early feasibility through to detailed design and project delivery, with a strong emphasis on collaboration and client-focused outcomes. With an experienced and technically strong team, the company provides end-to-end support, combining commercial awareness with in-depth knowledge of current legislation and industry standards. Our client places a strong emphasis on communication, long-term relationships, and continuous improvement, underpinned by their core values of customer focus, openness, results, and excellence. They have built a solid reputation for delivering reliable and innovative engineering solutions that enable successful development across a diverse portfolio of projects nationwide. Position Duties • Lead and manage civil engineering projects across drainage, highways, and external works from planning through to construction, • Oversee and coordinate design teams, including mentoring, appraising, and developing junior staff, • Plan, allocate, and control resources to ensure efficient project delivery and team performance, • Produce and review engineering designs, reports, and drawings in line with relevant standards and regulations, • Collaborate with clients, local authorities, developers, architects, and sub-consultants, • Manage project budgets, costs, and fee proposals while maintaining commercial awareness, • Ensure compliance with quality management systems, best practice, and continuous improvement processes, • Identify and manage design risks, ensuring health, safety, and sustainability are embedded in all projects, • Attend client meetings and site visits, maintaining strong professional relationships and communication, • Chartered Engineer (CEng) or Incorporated Engineer (IEng) [working towards CEng] with the Institution of Civil Engineers, • A degree or HND in Civil Engineering, • Background in collaborating with local authorities, developers, and architects on the civil engineering aspects of various schemes, • Consultancy experience is essential for this position, • Project management experience in civil engineering, covering schemes that integrate drainage, external works, and highways elements, • Experience with the design of on- and off-site highway features, in accordance with relevant standards and guidance (e.g. Design Manual for Roads and Bridges, Manual for Streets), • Previous experience in delivering drainage designs, highway layouts, and S278/S38 schemes, • Skilled in the use of AutoCAD and Site 3D, or equivalent 3D design software, • A thorough understanding of Sewers for Adoption, building regulations, and the SuDS Manual, • 5-hour workdays with flexible working hours, with a core hour requirement allowing for lifestyle and work life balance, • 24 days annual leave, increasing with length of service plus 8 bank holidays, • Day off on your birthday if it falls on a working day, • One community or charity day a year to allow you to support the person projects you love, • Salary sacrifice scheme with the opportunity to purchase or sell annual leave days., • Christmas shut down, • Quarterly and yearly bonus schemes, offering the potential to earn more, • Private healthcare upon completion of probation period JTRA1_UKTJ

Trainer, Training, Instructor - Electrical Electronic Engineering – Royal Navy Portsmouth, Hampshire Permanent – SC Cleared – Term Time working £39,000 to £41,000 pro rata + Large Co Benefits This is an outstanding opportunity for an experienced engineering professional to make a lasting impact by mentoring the next generation of Royal Navy engineers — leveraging your career expertise without the need for prior teaching experience! Main Tasks & Responsibilities Trainer, Training, Teacher, Instructor, Electrical Engineering > Delivering training to groups of up to 24 trainees in Electrical or Electronic engineering and machine principles > Conducting practical lab sessions, demonstrating key principles and supervising trainee experiments > Marking and check-marking assessments to ensure accuracy and consistency > Maintaining and updating training materials with Training Design staff Essential Skills & Experience Trainer, Training, Teacher, Instructor, Electrical Engineering # At least a Foundation Degree in Electronic or Electrical Engineering (or a related engineering discipline), or an HND/FdSc in Electronic or Electric Engineering or proven teaching/practical experience in Electronic or Electrical Engineering Desirable (not essential) Skills & Experience ~ Classroom experience in teaching technical subjects in an adult education environment, ~ Level 4 t...

Job Title: Electronics Engineer Location: Portsmouth Broad Oak. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £57,000 depending on skills and experience What youll be doing: • Design and development of electronic assemblies, from specification through to release into service, • Maintenance of existing designs and implementation of technology insertion programmes, • Translation of requirements into design detail, • Component selection, schematic capture, and support to PCB layout, • Specification of bespoke procured items, • Interfacing with related disciplines including mechanical engineering, ILS, Safety, and Production, • Follow the engineering lifecycle and undertake progress, peer and design reviews across various projects, • HND or Degree in Electronic Engineering or equivalent practical experience, • Ability to work with a PCB designers and advise on PCB/circuit layout for EMC, • Experience of complex design techniques including various comms protocols such as RS422, • Experience of generating component level designs for introduction into volume...

Job Title: Sales Engineer – Valves Location: Huddersfield Salary: Up to £35,000 per annum Job Type: Permanent, Full-Time About the Role We are seeking a motivated Sales Engineer to join our clients growing team within the valve industry. This permanent position offers an excellent opportunity for someone with an engineering or technical background who enjoys working in a commercial environment. The successful candidate will play a key role in managing customer enquiries, preparing technical quotations, and supporting the supply and sales process for valve solutions. You will act as a vital link between customers, suppliers, and internal departments to ensure projects are delivered efficiently and accurately. Key Responsibilities • Manage incoming customer enquiries and provide technical and commercial support., • Check available stock and identify suitable valve solutions to meet client requirements., • Prepare accurate sales quotations, including pricing and delivery information., • Conduct technical and commercial evaluations of supplier quotations to ensure compliance with client specifications., • Carry out contract reviews for new orders and supply activities., • Raise purchase requisitions for procurement of materials and components., • Produce pick lists and work instructions for production teams., • Coordinate with internal departments to ensure materials and orders are delivered on time., • Provide technical support and assist with resolving QA issues related to incoming or outgoing goods., • Maintain accurate records using company ERP systems and documentation processes., • Communicate professionally with customers, suppliers, and internal teams., • HNC/HND in an Engineering discipline or equivalent industry experience., • Experience in a sales, engineering, or technical support role (valve industry experience desirable but not essential)., • Good working knowledge of Microsoft Office (Word, Excel, PowerPoint)., • Experience using ERP systems., • Strong analytical skills with the ability to perform detailed technical and commercial evaluations., • Excellent attention to detail when preparing documentation and quotations., • Strong communication skills, both written and verbal., • Ability to build positive working relationships with clients, suppliers, and colleagues., • Confident in handling technical discussions with customers., • Organised, proactive, and able to manage multiple priorities., • Permanent role with long-term career prospects, • Salary up to £35,000 depending on experience, • Opportunity to work within a specialist engineering and valve solutions environment, • Supportive team culture and professional development opportunities JBRP1_UKTJ

Job Title: Test Equipment Engineer Hardware Location: Portsmouth Broad Oak. We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particular role Salary: Up to £50,000 depending on skills and experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. Job Description: You will act as a Test Equipment Engineer, delivering comprehensive engineering support for the Spearfish test equipment used within the UK. With this role you will report into the Spearfish test equipment team leader. Daily activities to include maintaining high levels of equipment availability. Also improving and designing new test equipment while working collaboratively as part of the Spearfish Test Equipment Team and contributing to the wider Spearfish In-Service Support Group. Core Duties: • Diagnosing a wide range of complex Special to Type Test Equipment to component level where applicable with limited technical support, • Influence and deliver design obsolescence tasks, implementing new electrical hardware at Broad Oak and customer locations where required, • Lead and perform a range of development activities including producing design schemes, circuit diagrams, wiring schedules, design documentation, specification and other test process tasks, • Compile and approve Engineering Designs, Changes, Tasks and Concession actions, • Responsibility and ownership of a selection of in-service support and test equipment, • Youll be qualified in a relevant Engineering or closely related discipline to HNC/HND/Degree level, • Youll have a test equipment/hardware design background, • Youll have experience within repair and investigation of test equipment You will work alongside an experienced team of 10 hardware and software engineers. Who report into will report to the Spearfish Test Equipment Team Leader who reports into the TRAM Engineering Manager. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 9th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-RB1 #LI-Hybrid JBRP1_UKTJ

Trainer, Training, Instructor - Electrical Electronic Engineering Royal Navy Portsmouth, Hampshire Permanent SC Cleared Term Time working £39,000 to £41,000 pro rata + Large Co Benefits This is an outstanding opportunity for an experienced engineering professional to make a lasting impact by mentoring the next generation of Royal Navy engineers leveraging your career expertise without the need for prior teaching experience! Main Tasks & Responsibilities Trainer, Training, Teacher, Instructor, Electrical Engineering Delivering training to groups of up to 24 trainees in Electrical or Electronic engineering and machine principles Conducting practical lab sessions, demonstrating key principles and supervising trainee experiments Marking and check-marking assessments to ensure accuracy and consistency Maintaining and updating training materials with Training Design staff Essential Skills & Experience Trainer, Training, Teacher, Instructor, Electrical Engineering At least a Foundation Degree in Electronic or Electrical Engineering (or a related engineering discipline), or an HND/FdSc in Electronic or Electric Engineering or proven teaching/practical experience in Electronic or Electrical Engineering Desirable (not essential) Skills & Experience ~ Classroom experience in teaching technical subjects in an adult education environment, ~ Level 4 teaching qualification ~ Experience of the Defence Systems Approach to Training (or equivalent). This role is offered on a term time basis working 45 weeks per year, with non-working weeks taken 2 weeks at Christmas and Easter and 3 weeks in August. The salary will therefore be pro ratad and calculated to include contractual annual leave entitlement and bank holidays. JBRP1_UKTJ

Fixed term contract for 6 months, starting ASAP Full-time; 42.5 hours per week £55,672.90 per annum Based in: Covent Garden, London Prior to commencing your application , ___ The Royal Ballet and Opera continues to lead the way in opera, ballet, music and dance both live on stage and through multiple digital platforms, from live streaming to worldwide cinema screenings. Our Covent Garden theatre has been at the heart of London and British cultural life for three centuries. We are home to two world-class Companies: ___ and ___. The Royal Opera House describes the place we work, not who we are. The whole is always more than the sum of its parts – we may be a House, but three quarters of our audiences experience what we do outside this building. While our Covent Garden theatre is the nerve centre, the impact and influence of the organisation can be felt in every corner of the country, and around the world. Our Technical, Production and Costume Department plays a leading part in ensuring our performances are of the highest quality by delivering technical excellence for every performance, rehearsal, and event. The role: This is an incredibly exciting opportunity to join our costume department in a key leadership role as part of the Wigs and Make-Up management team. In this role you will work collaboratively with your fellow managers to ensure the team deliver both new and revival productions to the highest possible standard of safety, efficiency, and quality, whilst upholding the highest principles of presentation and courtesy . The Wigs and Make-Up department is currently made up of c. 20 permanent technicians and senior technicians, alongside an excellent pool of casual and freelance staff. What you’ll bring: We are looking for a dynamic and experienced candidate who can bring a strong team leadership ethic to the role. You will be confident leading by example, with a passion for building a diverse and inclusive workplace. You will have strong communication skills, a collaborative mindset and an eye for high quality output. You will also be able to demonstrate: • HND or degree in Wigs and Make-up for the Performing Arts preferred, City and Guilds Hairdressing Diploma and Make-up course or equivalent., • Excellent professional experience in hair and make-up techniques for the theatre., • Extensive knowledge of the latest techniques, materials and products used for wig making, make-up looks, prosthetics and effects as well as historical period wig making and setting, hair qualities and suppliers., • A good track record in demonstrating quality and flair in interpreting the designer’s brief., • Proven experience of managing teams and projects with consistent high production standards, including effective resource and budget management. We value the diversity new hires can bring to our workforce. A working knowledge of our repertoire is not essential, but the ability to learn quickly is. The Royal Ballet and Opera is one of the UK’s leading arts organisations and our aim is to inspire imagination, ignite emotion and make the extraordinary for everyone. Equality, Diversity and Inclusion underpin all that we do. We want our people to be representative of the diversity in the UK. We understand the creativity and innovation that diversity can bring and strive to create an inclusive environment in which everyone can thrive. We encourage applications from people with a wide range of backgrounds, experiences and skills to join our teams. We particularly welcome applications from those who are from a global majority background and/or those who are disabled, as they are under-represented within our organisation. We are a Disability Confident Employer, which means that we are actively working to ensure that candidates with disabilities and long-term health conditions feel supported, engaged and able to fulfil their potential in the workplace. We will endeavour to offer an interview to candidates who tell us they wish to participate in the scheme and who demonstrate in their application that they meet the essential criteria for the role, though sometimes due to the volume of qualified candidates with declarations this is not possible. The RBO is also committed to safeguarding and protecting all children, young people, and adults and we implement robust safer recruitment practices. Due to our safeguarding promise, certain roles will be subject to a DBS check before commencing employment with us, which will be indicated in the advertising. For more information about working with the Royal Ballet and Opera, ___ For a list of potential reasonable adjustments, ___ If you have any access requirements for your application, please contact the RBO Recruitment Team on If you are applying as an internal candidate, ___ Closing date for applications: 11:59pm, Monday 6th April 2026. To ensure a fair process, late applications will not be considered under any circumstances. Applicants must have work authorisation for the UK. No agencies.

Quantity Surveyor / Senior Quantity Surveyor Southampton Learn more about the general tasks related to this opportunity below, as well as required skills. Energy & Infrastructure Projects | NEC4 | Site-Based Build something that matters. Our Energy Division at Trant Engineering Ltd is growing and were looking for a Quantity Surveyor / Senior QS who knows their way around NEC4 contracts and thrives on complex civil engineering projects. Youll be joining a business with real momentum, working on a major infrastructure scheme involving RC structures, roads, drainage, steel frame and cladding. What youll be doing This is a hands-on, site-based role where youll take ownership of key commercial activities: • Managing valuations & CVRs, • Remeasuring works and tracking installed quantities, • Handling change control and variations, • Procuring and managing subcontractors, • Overseeing subcontractor payments, • Producing monthly commercial reports, • Forecasting cash flow and managing risk, • Supporting dispute resolution, • Driving projects through to final accountWhat were looking for, • Experience as a QS or Senior QS in civil engineering / infrastructure, • Strong working knowledge of NEC4 contracts, • HNC / HND / Degree (or equivalent experience), • CSCS card, • Growing business with a strong project pipeline, • Real opportunities for career progression, • Professional development fully supported What youll get, • Competitive salary, • Company car / allowance, • 24 days holiday + bank holidays (rising with service), • Pension scheme, • Paid professional qualification, • 24/7 Employee Assistance Programme, • Discounted gym membership

Graduate Trainee Sales Engineer - Field Based (SO, PO, RH, GU Postcode Areas) Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Location: Applicants must currently live within one of the following postcode areas - SO, PO, RH, or GU - covering key towns such as Southampton, Portsmouth, Chichester, Worthing, Crawley, Guildford, Farnham, and Woking. Salary: Competitive basic + performance-based bonus + company car + full training + career development Are you an ambitious engineering graduate looking to build a rewarding career in technical sales? We're recruiting on behalf of a market-leading engineering solutions company for a Graduate Trainee Sales Engineer to join their expanding field sales team. This role is ideal for a self-motivated, technically minded individual who enjoys working independently and building customer relationships. The company provides industrial electronics and mechanical repair solutions to manufacturers designed to save them time and money by extending machine life by repairing and refurbishing complex items which a standard industrial maintenance team would not have the time or expertise to carry out themselves. In nearly all cases they can save their customers considerable expense and as a result they have become a valued business partner for many of their customers. The primary customers are Engineering and maintenance managers within the manufacturing sector. What you'll be doing: • Developing new and existing customer relationships across your field territory encompassing the SO, PO, RH, and GU postcode areas., • Visiting engineering and manufacturing clients to identify technical needs and propose solutions.Getting on site to spot opportunities is a key step in their sales process., • Managing your own diary, appointments, and reports with support from a dedicated regional manager., • A recent engineering, electronics, or related technical graduate (HNC, HND, or degree)., • A driven self-starter with strong communication and problem-solving skills who is strongly results oriented., • Must hold a full UK driving licence and currently reside within the SO, PO, RH, or GU postcode areas to be considered., • Fully structured training programme - including comprehensive sales and product training with on-the-job mentoring., • Company car, laptop, and mobile phone provided from day one., • Competitive basic salary with performance-based incentives experienced sales engineers with established sales territories are earning £1500-£2000 per month in commissions.

Are you ready to take the next step in your career? Make sure to read the full description below, and please apply immediately if you are confident you meet all the requirements. Do you want to do meaningful work that improves quality of life? At Tetra Tech, you will work with high-performing teams who are passionate about using their expertise to find solutions to complex problems in water, environment, infrastructure, resource management, defence, energy, and international development. This well established and thriving multi-disciplinary company is looking to recruit a self-motivated asbestos analyst / surveyor, due to current workload and expanding our team. There is also the opportunity for international travel as a significant proportion of our works are overseas. Qualifications required are the British Occupational Hygiene Society modules P402, P403 and P404. You should be able to demonstrate experience of carrying out asbestos surveys and air-monitoring across a variety of property types. Key duties: • Carrying out asbestos surveys, re-inspections and sampling, • Carrying out asbestos smoke, background, leak reassurance, visual, 4 stage clearances and re-occupation and personal air testing, • Managing asbestos removal work to monitor that the work is carried out in accordance with relevant guidelines and procedures, • Collating and producing comprehensive reports as and when required, • British Occupational Hygiene Society modules P402, P403 and P404 or equivalent are required, • A minimum of 5 GCSEs or equivalent at grade C or above including english and maths, • Higher level qualifications such as an HND or equivalent would be advantageous, • The successful applicant will be an all-rounder, flexible, will have a good work ethic, good attention to detail and the ability to work independently and as part of a team., • Security clearance and criminal background check requirements for work on various police and government contracts, • Willing to travel both locally, regionally and internationally Qualifications required are the British Occupational Hygiene Society modules P402, P403 and P404. Our way of working We take pride in delivering projects effectively for clients. This often requires colleagues to be together- in offices or on site to ensure the best outcomes. However, when possible, we also advocate for flexibility around how, when, and where you work. There is no 'one approach fits all' each team manages their own way of working, we trust our employees and focus on outputs not inputs. Meeting up with colleague and clients face to face in office environments or on site is important for collaboration, face-to-face meetings, appraisals and development. Inclusion At Tetra Tech, we want everyone to feel like they truly belong. Our goal is to create aworkplace where every person is valued and respected for who they are. Everyone is welcome at Tetra Tech. Opportunities and success should only be determined by attitude, capability and collaborative spirit. xrnqpay Be yourself, without apology. For more information on our company, please visit our website . To apply, please submit your resume and cover letter on the Careers portion of our website at Tetra Tech Europe Careers - Jobs ( ) Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010.

A specialized equipment manufacturer in Portsmouth is seeking a Design Engineer to join their multidisciplinary team.The role involves developing innovative engineering solutions, creating manufacturing drawings, and maintaining quality standards.Candidates should have an HND/Degree with a mechanica

As part of our continued growth in Automation, we are looking for a Senior Systems Engineer to join our team in Fareham. Senior Systems Engineers are normally expected to undertake the following:. A Degree or HND/HNC in Electrical / Electronic Engineering, Control Systems or relevant discipline.

ROLE – Mechanical Design Engineer SALARY - £28,000-£32,000, dependent on experience TYPE – Permanent LOCATION – Hampshire My client designs and manufactures bespoke products for the Defense & Security sector. They are looking for a Mechanical Design Engineer to join their team in the Hampshire area on a permanent basis. The Mechanical Design Engineer will ideally have the following attributes: At least 2 years of experience in a similar Mechanical Design Engineering position Experienced with machinery design, hydraulics, sheet metal and precision components Strong 3D CAD skills – ideally Inventor Strong practical skills – hand calculations, verification, validation, FEA, testing, prototyping Degree / HNC / HND / BTEC / NVQ / ONC qualified or similar in Mechanical Engineering or similar Experienced designing products from concept to production Able to manage projects and work to deadlines and budgets Able to maintain technical documentation and BOM entry Innovative, accurate and passionate about design Be technically minded with a head for problem solving Excellent leadership and organisational skills Able to work well individually as well as part of a team The Mechanical Design Engineer role will involve: Using CAD for concept design and producing technical drawings Using Inventor software for design on a day-to-day basis Being responsible for research, hand calculations, FEA, testing and prototyping Managing the full product lifecycle from concept to production Creating models/prototypes Liaising with clients and developing solutions for design specifications Collaborating with different departments to ensure the smooth delivery of projects Maintaining technical drawings and documentation Providing technical guidance and support Supporting product Testing, Verification & Validation Supporting more junior members of the team If you are interested in this position, please apply with an up to date CV as soon as possible

Aircraft engineering Trainer (Full Training Provided) Fareham £38,000 - £45,000 + £3,000 Market Supplement + 10 Weeks Holiday + Pension + Full Training & Development Are you an aircraft fitter, mechanic or engineer or technician with strong maintenance, fitting and servicing experience? Do you want to step into a structured, less pressured environment where you can pass on your skills and improve your work-life balance? This is a standout opportunity to join a forward-thinking engineering education provider that has invested over £20 million into a purpose-built training centre. The entire facility has been designed to raise the standard of engineering education across the south coast, equipped with industry-leading technology that goes far beyond what you would typically expect in a college environment. You'll be working in an environment that mirrors industry standards, delivering training from Level 2 through to HND, using high-quality equipment and modern teaching methods. The organisation has built a strong reputation for excellence and is backed by a collaborative and supportive team who are experienced in helping engineers successfully transition into education. This is not just a teaching role - it's an opportunity to be part of something bigger, helping shape the next generation of aviation engineers while working in a facility that reflects the future of the industry. In this role, you'll deliver a mix of practical and theoretical aeronautical engineering training, supporting learners through their development while gradually building your own teaching skillset with full training provided. The ideal candidate will be someone from an aircraft fitting, maintenance or aviation engineering background, with strong hands-on experience in aircraft servicing, maintenance and fitting, who is looking to move into education and step away from the tools. You'll be fully supported in gaining any required teaching or assessing qualifications, making this the perfect opportunity for someone looking to make a long-term career move. The Role: * Deliver practical and classroom-based aeronautical engineering training * Teach across a range of programmes from Level 2 to HND * Support and mentor learners through their development * Assess student work and provide constructive feedback * Act as a personal tutor, supporting student progress and wellbeing * Contribute to course development and continuous improvement * Support industry engagement and work placements The Person: * Background as an aircraft fitter, aircraft mechanic, or aviation technician * Strong hands-on experience in aircraft maintenance, servicing and fitting * Wants to move into education and pass on industry knowledge * Good communication and interpersonal skills * Motivated, reliable, and keen to develop new skills * Open to training and gaining teaching qualifications Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Principal Civil Engineer Location: Fareham, Hampshire Hours: Monday to Friday, Flexible Opportunity with Core Hours Required Salary: Competitive Holiday: 32 days including bank holidays, Increasing with length of service. Sector: Civil Engineering Our client is a well-established, multi-disciplinary consultancy specialising in transport planning, travel planning, and civil and structural engineering services. The business has grown steadily in recent years and now operates across the UK, supporting both public and private sector clients on a wide range of development and infrastructure projects. They are known for delivering practical, high-quality solutions from early feasibility through to detailed design and project delivery, with a strong emphasis on collaboration and client-focused outcomes. With an experienced and technically strong team, the company provides end-to-end support, combining commercial awareness with in-depth knowledge of current legislation and industry standards. Our client places a strong emphasis on communication, long-term relationships, and continuous improvement, underpinned by their core values of customer focus, openness, results, and excellence. They have built a solid reputation for delivering reliable and innovative engineering solutions that enable successful development across a diverse portfolio of projects nationwide. Position Duties Lead and manage civil engineering projects across drainage, highways, and external works from planning through to construction Oversee and coordinate design teams, including mentoring, appraising, and developing junior staff Plan, allocate, and control resources to ensure efficient project delivery and team performance Produce and review engineering designs, reports, and drawings in line with relevant standards and regulations Collaborate with clients, local authorities, developers, architects, and sub-consultants Manage project budgets, costs, and fee proposals while maintaining commercial awareness Ensure compliance with quality management systems, best practice, and continuous improvement processes Identify and manage design risks, ensuring health, safety, and sustainability are embedded in all projects Attend client meetings and site visits, maintaining strong professional relationships and communication Support business development through client engagement, marketing input, and promotion of the company's servicesPosition Requirements Chartered Engineer (CEng) or Incorporated Engineer (IEng) [working towards CEng] with the Institution of Civil Engineers A degree or HND in Civil Engineering Background in collaborating with local authorities, developers, and architects on the civil engineering aspects of various schemes Consultancy experience is essential for this position Project management experience in civil engineering, covering schemes that integrate drainage, external works, and highways elements Experience with the design of on- and off-site highway features, in accordance with relevant standards and guidance (e.g. Design Manual for Roads and Bridges, Manual for Streets) Previous experience in delivering drainage designs, highway layouts, and S278/S38 schemes Skilled in the use of AutoCAD and Site 3D, or equivalent 3D design software A thorough understanding of Sewers for Adoption, building regulations, and the SuDS Manual Experience in line management, including conducting appraisals, identifying training requirements, and supporting the performance of junior team membersPosition Remuneration 5-hour workdays with flexible working hours, with a core hour requirement allowing for lifestyle and work life balance 24 days annual leave, increasing with length of service plus 8 bank holidays Day off on your birthday if it falls on a working day One community or charity day a year to allow you to support the person projects you love Salary sacrifice scheme with the opportunity to purchase or sell annual leave days. Christmas shut down Quarterly and yearly bonus schemes, offering the potential to earn more Private healthcare upon completion of probation period Bike to work schemeStreamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application

JOB - Electrical Design Engineer LOCATION – Portsmouth TERM – Permanent SALARY - £40,000 - £45,000 (Dependant on experience) The Electrical Design Engineer will be responsible for the design and development of electrical systems used within the company’s manufactured equipment. This role involves working closely with multidisciplinary teams including mechanical design, controls, and production to deliver reliable and compliant electrical designs. Key Responsibilities Design electrical schematics, wiring diagrams, and control panel layouts Develop electrical systems for bespoke and standard manufacturing equipment Produce technical documentation including bills of materials and specifications Ensure designs comply with relevant electrical standards and regulations Support the build, test, and commissioning of equipment when required Work collaboratively with internal teams to resolve design and production issues Contribute to continuous improvement of design processes and standards Requirements Degree, HND, or equivalent qualification in Electrical Engineering or a related discipline Experience in electrical design within a manufacturing or machinery environment Proficiency with electrical design software such as AutoCAD Electrical, EPLAN, or similar Knowledge of relevant standards and regulations Strong problem-solving skills and attention to detail Ability to work both independently and as part of a team If you are interested in this position, please apply with an up to date CV as soon as possible, along with your availability and your salary expectation

Abatec is partnering with a well-established civil engineering contractor to recruit a Site Agent on a permanent basis. The role sits within the water and heavy civil engineering sector, supporting the delivery of a major infrastructure and earthworks scheme in the South of England. This position would suit a hands-on Site Agent who enjoys taking ownership of site delivery and working closely with project leadership to drive performance across safety, quality, programme and cost, within a stable, long-term project environment. As Site Agent you will: • Taking day-to-day responsibility for site delivery, ensuring works are carried out safely, efficiently and to the required standards, • Implementing and maintaining health & safety, quality and environmental controls in line with project and company procedures, • Managing and coordinating subcontractors, plant, materials and suppliers on site, • Preparing and submitting weekly reports on progress for review by the Project Manager or Contract Manager for inclusion in the project’s financial CVRs and forecasts to completion, • Liaising with the site manager and foreman as to what engineering is needed onsite and holding daily engineering briefings with the onsite engineers., • Actively resolve contractual issues with both clients and suppliers while also maintaining a good relationship Our client requires a Site Agent with: • Degree/HNC/HND or equivalent in Civil Engineering, • Previous experience as a Site Agent within the Civil Engineering industry and preferably large-scale earthworks projects, • Experience in Design & Build contracts, • An understanding and experience of NEC 4 contracts, • SMSTS, First Aid at Work and CSCS Managers card Salary/Benefits: • £55,000 - £65,000 p/a, • Company Vehicle, • 25 days holiday + bank holidays, • Ongoing professional development and training, • additional benefits If you would like more information, or to apply for this vacancy, please contact Lloyd Barham on (phone number removed). The reference for this vacancy is (phone number removed). We are always looking for candidates for similar positions, so please register your details with us to hear about similar opportunities that you may be interested in. Abatec Ltd. is working as an employment business on behalf of a client

At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Please note the working pattern for this role is onsite at our Fareham office, full time for the first 3 months. After, up to 2 days per week remote available, depending on business need. Role Overview As an Innovations engineer you will be helping maintain and develop software-based solutions to business problems in a small team of full-stack software engineers. These solutions will be aimed at ensuring TUV SUD is well placed to deliver future services in a timely, efficient and competitive manner. You will be supporting and developing tools that will be used internally to support the business as we push to digitize and automate our internal processes. As part of the Innovations Team, you will liaise with various parts of the business to support existing applications and provide new and innovative software solutions for internal company usage. You will be expected to input on software requirements, software implementation and propose effective solutions. Duties and Responsibilities * Writing Visual Basic/.NET software to support and update a key legacy application used across the business. * Writing C#/.NET software to automate manual processes and help improve efficiencies across the business. * Functioning as a full-stack developer, working within a small team that is delivering both front-end and back-end software. * Contributing to the design of Innovations projects. * Participating in and contributing to Innovations practices such as Agile ceremonies and trainings. * Automation of data collection, analysis and reporting using databases (SQL and MongoDB). * Code sharing within the Innovations Team to speed up development process. * Training for Service Line employees in areas where new software tools have been deployed by the Innovations team. * Produce and prove solutions in concept with working prototypes. * Provide regular updates on project progress. * Track project progress using DevOps. Essential Criteria: * HND (or higher) or equivalent qualification in Engineering or equivalent experience. * Demonstrable professional experience in software engineering, with experience with C#, VB and .NET. * Experience with SQL, preferably T-SQL. * Experience with MongoDB. * Experience with both front- and back-end development. * Ability to develop a working software solution in a team environment from concept to finished product. * Team player, maintaining a high level of accuracy and attention to detail, good communication skills at all levels. * Self-motivated with a desire to learn new skills and make a business impact. Desirable Criteria: * SQL Server experience, preferably using stored procedures. * Experience using Azure DevOps in an Agile team. * Experience with Agile ceremonies. * Knowledge of Radio Frequency techniques and technologies. * Experience with controlling RF test equipment and positional controllers. * Strong communication skills and ability to communicate technical problems and potential solutions clearly to non-technical staff Further Information TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent homeworking, a Company Car/Car Allowance and Private Medical Insurance. At TÜV SÜD, we have employees from more than 100 different countries collaborating together. People of different backgrounds, skills, and pursuing different life goals. Our strength comes from these countless and varied perspectives. We are committed to be an inclusive and diverse workplace by welcoming people of all backgrounds. We want Diversity & Inclusion (D&I) to be a foundation of our company and create an environment where all our employees can trust they will be treated with respect, regardless of gender, nationality, ethnic background, faith, beliefs, disabilities, age, sexual orientation, or identity. As such, our employees are expected to behave at all times in a manner consistent with TÜV SÜD Code of Ethics and Company values. We firmly believe embedding D&I in the heart of what we do will inherently contribute to the success of TÜV SÜD. Click here to find out more about Diversity at TÜV SÜD

We’re recruiting for a technically skilled Technical Support Engineer to join a growing aftersales and service support function based in Portsmouth. This is an excellent opportunity for someone with an electro-mechanical background and experience supporting heat pumps systems who enjoys fault finding, technical problem solving and supporting engineers, installers, and customers. You will play a key role in delivering high-quality technical support, ensuring equipment performance, supporting commissioning activities and contributing to ongoing product and service improvements. As Technical Support Engineer, you’ll provide remote technical assistance to customers and field service engineers, supporting installation, commissioning, servicing, and fault resolution across a range of heat pumps as well as heating, cooling and air handling equipment. You will also support warranty investigations, product testing, and technical training delivery. Main Duties Provide telephone and email technical support to customers and service engineers Diagnose faults and support troubleshooting of heating, cooling, and air handling systems Test and fault-find returned warranty items Configure and set parameters on spare parts prior to dispatch Support commissioning activities and communicate technical requirements to engineers Produce technical documentation and training materials Deliver product and aftersales training to customers and partners Assist with quality and compliance activities (ISO 9001:2015) Attend site visits when required to support technical investigations Skills & Knowledge Electro-mechanical technical background (HNC/HND or equivalent preferred) Experience supporting heat pumps, HVAC, or air handling systems Strong fault-finding and diagnostic skills Ability to read wiring diagrams, schematics, and technical manuals Competent testing electrical components and equipment Confident communicator — phone, email, and technical reporting Self-motivated with a proactive approach to learning and product knowledge Full UK driving licence Salary & Benefits £45-50K salary depending on experience Company pension 25 days holiday + bank holidays Training and development support Stable, supportive engineering environment Opportunity to work with advanced heating and cooling technologies

We're recruiting for a technically skilled Technical Support Engineer to join a growing aftersales and service support function based in Portsmouth. This is an excellent opportunity for someone with an electro-mechanical background and experience supporting heat pumps systems who enjoys fault finding, technical problem solving and supporting engineers, installers, and customers. You will play a key role in delivering high-quality technical support, ensuring equipment performance, supporting commissioning activities and contributing to ongoing product and service improvements. As Technical Support Engineer, you'll provide remote technical assistance to customers and field service engineers, supporting installation, commissioning, servicing, and fault resolution across a range of heat pumps as well as heating, cooling and air handling equipment. You will also support warranty investigations, product testing, and technical training delivery. Main Duties Provide telephone and email technical support to customers and service engineers Diagnose faults and support troubleshooting of heating, cooling, and air handling systems Test and fault-find returned warranty items Configure and set parameters on spare parts prior to dispatch Support commissioning activities and communicate technical requirements to engineers Produce technical documentation and training materials Deliver product and aftersales training to customers and partners Assist with quality and compliance activities (ISO 9001:2015) Attend site visits when required to support technical investigations Skills & Knowledge Electro-mechanical technical background (HNC/HND or equivalent preferred) Experience supporting heat pumps, HVAC, or air handling systems Strong fault-finding and diagnostic skills Ability to read wiring diagrams, schematics, and technical manuals Competent testing electrical components and equipment Confident communicator — phone, email, and technical reporting Self-motivated with a proactive approach to learning and product knowledge Full UK driving licence Salary & Benefits £45-50K salary depending on experience Company pension 25 days holiday + bank holidays Training and development support Stable, supportive engineering environment Opportunity to work with advanced heating and cooling technologies TPBN1_UKTJ

Quality Engineer Location: North Hampshire (close to Farnham, Surrey) Salary: £36,000 Plus Benefits (Quarterly Bonus, Contributory Pension, 25 Days Holiday.) Are you passionate about quality, problem solving, and continuous improvement? We are looking for a Quality Engineer to join a growing manufacturing environment where quality, innovation, and teamwork drive everything they do. This is an exciting opportunity to play a key role in improving products, processes, and customer satisfaction while working with cross-functional teams across engineering, operations, and supply chain. You will be leading a team of 5, reporting into the head of QHSE. This could be the ideal stepping stone for an ambitious Inspector or a QC Engineer looking for new responsibilities or a fresh challenge. The Role As a Quality Engineer, you will help ensure products meet the highest standards by applying robust quality systems, statistical analysis, and structured problem-solving techniques. You will be responsible for investigating issues, implementing improvements, and supporting the development of a culture focused on “Right First Time” quality and continuous improvement. The business specialises in custom elastomer engineering and provides a comprehensive service for the design and manufacture of elastomer components. They produce the highest standards of quality and precision in moulded products, often working to tight dimensional tolerances not generally associated with the manufacture of mechanical rubbers. They produce bespoke, precision moulded parts for a range of industries and end users – from the automotive sector to the Defence industry – with Quality at the heart of everything they produce. What You'll Be Doing Quality Assurance & Product Integrity · Supporting quality inspections for critical processes and new product launches · Producing dimensional and performance reports for internal teams and customers · Operating laboratory testing equipment and measurement tools · Investigating quality issues and implementing corrective actions Continuous Improvement · Using Lean and Six Sigma tools to drive process improvements · Supporting SPC, FMEA, Control Plans, and PPAP activities · Analysing data to identify opportunities to reduce defects and improve efficiency Customer & Supplier Quality · Working with customers and suppliers to resolve quality issues · Supporting supplier audits and customer quality reviews · Contributing to responses for customer concerns Collaboration & Leadership · Working closely with operations, engineering, and supply chain teams · Supporting internal quality training and knowledge sharing · Helping build a strong quality culture across the organisation What We're Looking For Skills & Knowledge · Previous experience of Plastic / Rubber Moulding and Component Production · Previous leadership experience (managing inspectors and junior Quality Control personnel) · Strong understanding of quality management systems (ISO 9001) · Experience with root cause analysis tools (8D, 5-Why, Fishbone) · Knowledge of Lean Manufacturing or Six Sigma methodologies · Ability to read technical drawings and measurement data · Strong communication and stakeholder management skills Experience · Experience in a precision manufacturing or engineering environment · Hands-on experience with inspection, measurement, and quality analysis · Involvement in customer or ISO audits · Experience working on continuous improvement projects Qualifications · HNC/HND or Degree in Engineering, Quality, or related field (preferred) Why Join? · Opportunity to work in a high-impact quality role · Be part of continuous improvement and operational excellence initiatives · Work alongside experienced engineering and manufacturing professionals · Competitive salary and benefits package If you are a detail-driven Quality Engineer who enjoys solving complex problems and improving processes, we would love to hear from you. Apply today to be part of a team where quality really matters

Senior Architectural Technologist Location: Hampshire Salary: £40-45,000 DOE I'm partnering with a well established and award winning architectural practice to recruit a Senior Architectural Technologist for their welcoming and collaborative studio in Hampshire. With more than three decades of experience, the practice has developed a strong reputation for delivering high quality architectural projects throughout the South of England. Their work spans bespoke homes, residential developments, commercial projects and heritage refurbishments, providing a diverse and engaging range of projects. The team is recognised for its approachable culture, strong client partnerships and a focus on carefully considered, well resolved design and technical solutions. Benefits * Supportive and collaborative studio environment * Opportunity to work closely with experienced directors and senior team members * Involvement in projects from concept through to completion * Clear opportunity for career progression within a growing practice * Flexible and supportive working culture Key Responsibilities for the Senior Architectural Technologist * Lead the technical development and delivery of projects across residential, commercial and heritage sectors * Manage projects through multiple RIBA stages, with a strong focus on technical design and delivery * Prepare and coordinate planning, building regulations and construction packages * Produce detailed drawing packages, specifications and technical information * Coordinate with consultants, clients and contractors to ensure smooth project delivery * Ensure compliance with UK Building Regulations and technical standards * Support and mentor junior team members within the studio About You * Degree or HNC/HND in Architectural Technology or a related discipline * Strong experience working within a UK architectural practice * Demonstrable experience delivering projects across several RIBA stages * Proficient in AutoCAD, Revit and Adobe Creative Suite * Strong technical knowledge of UK Building Regulations and construction detailing * Excellent communication and coordination skills * Proactive, organised and confident managing project responsibilities To apply, please call Sophie on (phone number removed) or alternatively, send your CV and Portfolio across to . I look forward to hearing from you soon

️ MEP Estimator Portsmouth Full-time | Permanent £45,000-£55,000 + Benefits About the Role Link Consultants are working with a long standing company that are seeking a skilled and detail-oriented MEP Estimator to join their growing and dynamic team. This is an excellent opportunity to play a key role in delivering high-quality mechanical, electrical, and plumbing (MEP) estimates across a range of residential, commercial, and industrial projects. You will be responsible for producing accurate and competitive cost estimates, supporting the tender process, and helping secure new business by ensuring proposals are commercially sound and aligned with client requirements. Key Responsibilities • Analyse drawings, specifications, and tender documents to prepare accurate MEP cost estimates, • Carry out detailed material take-offs and labour calculations, • Obtain and evaluate quotations from suppliers and subcontractors, • Prepare cost plans, tender submissions, and value engineering options, • Collaborate with project managers, engineers, and design teams to assess risk and buildability, • Attend pre- and post-tender meetings with clients and stakeholders, • Ensure all estimates comply with relevant industry standards and regulations, • Maintain and update cost databases, supplier, and subcontractor information About You Skills & Experience • Proven experience as an Estimator within the MEP / Building Services sector, • Strong understanding of mechanical, electrical, and/or plumbing systems, • Ability to interpret technical drawings and specifications, • Proficiency in estimating software and Microsoft Excel, • Strong analytical and numerical skills with high attention to detail, • Excellent communication and negotiation abilities, • Ability to work under pressure and meet tight deadlines Personal Attributes • Highly organised and self-motivated, • Proactive and collaborative team player, • Commercially aware with a strong business mindset, • Committed to continuous learning and development Qualifications (Desirable) • HNC/HND or Degree in Mechanical or Electrical Engineering, Quantity Surveying, or similar, • Professional membership (e.g., Chartered Institution of Building Services Engineers or Royal Institution of Chartered Surveyors) is advantageous "We are a recruitment consultancy advertising this role on behalf of our client. All applications will be handled in line with their recruitment process

Role- Lead Design Engineer Salary- £60,000 - £75,000 per annum (dependent on experience) Type- Permanent Location- Southampton My client provides products and engineering solutions within the consumer product sector. They are looking for a Lead Design Engineer to join their team in Southampton on a permanent basis. The Lead Design Engineer will ideally have the following attributes: At least 4 years’ experience in a similar Design Engineering / CAD Operation position Experience working with different materials, metal, plastics or in a highly regulated industry would be beneficial Experienced with full lifecycle product design Excellent proficiency with CAD software – ideally SolidWorks, Inventor or similar HNC / HND / BTEC / NVQ / Degree qualified in Mechanical Engineering or similar Proven ability to drive Engineering development Good mathematical and general engineering knowledge Excellent knowledge of manufacturing processes and materials –castings, machining etc. The ability to understand system requirements Excellent leadership skills with experience managing others Be self-motivated with excellent attention to detail Have excellent communication skills both verbal and written The Lead Design Engineer role will involve: Using CAD for concept design and producing technical drawings New product and technology development, from concept to completion Supporting key decision making in the design department Leading a small team Reviewing orders and creating plans to modify designs or design from scratch Liaising with manufacturing providers Being involved in final assembly of products Being involved with technical updates and improvements Creating the required documentation for design as well as project reports / plans Updating 3D models and drawings Inputting parts into the MRP system creating BOMs Checking drawings for sign off Working in a small multi-disciplinary team on varied projects If you are interested in this position, please apply with an up to date CV as soon as possible

We're working with an established civil engineering contractor that delivers a wide range of infrastructure and environmental engineering projects across the UK. Due to continued growth and a strong pipeline of upcoming work, they are looking to appoint an Estimator to join their pre-construction team. This is a great opportunity to join a contractor involved in technically interesting civil engineering schemes, working closely with operational and commercial teams to support successful project bids. The Role As Estimator, you will play a key role in the preparation of competitive tenders and cost plans across a range of civil engineering projects. Key responsibilities include: Preparing detailed cost estimates from tender documentation Reviewing drawings, specifications and project requirements Obtaining and analysing subcontractor and supplier quotations Producing cost build-ups for labour, plant and materials Identifying risks, opportunities and value engineering options Supporting the preparation of tender submissions and programmes Working closely with delivery teams to ensure smooth handover following project award About You Experience working in an estimating or pre-construction role within civil engineering or infrastructure Good understanding of construction methods, materials and plant Ability to interpret technical drawings and tender documentation Strong commercial awareness and analytical skills Proficient with Excel and estimating software Degree or HNC/HND in Civil Engineering, Quantity Surveying or similar (preferred) If you're an Estimator looking to develop within a busy civil engineering contractor, feel free to get in touch for a confidential discussion. Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

You will like Leading in civils at Fareham/Portsmouth HQ for award-winning Civil Engineering, Structural Engineering and Transport Planning consultancy. They are trusted advisors on a multitude of projects at various stages in their project lifecycle, from appraisal through to construction, and in several different sectors, including residential, commercial, and retirement & care. They will make an excellent employer for professional civil engineer with management experience. You will like The Principal Civil Engineer job itself, where you will support the management of an expanding civil engineering team and oversee complex schemes across commercial and residential clients including high profile Welborne Garden Village developments. More specifically: Work within a Civil Engineering design team responsible for the design of drainage systems, highway layouts, and S278/S38 schemes, Work in a design office, with regular exposure to developers, architects and local authorities. Undertake and manage team resource for design work for; Drainage systems in accordance with Sewers for Adoption, building regulations and the SuDS Manual. On and off-site highway features, in accordance with the appropriate standards and codes e.g. Design Manual for Roads and Bridges, and Manual for Streets Reviewing of junior team members reports, design and drawing work, Mentor junior staff members and support their journey towards ICE accreditation, Proficient in AutoCAD and Site 3D or equivalent 3D software, Have knowledge of and willing to learn other engineering software, Be responsible for writing fee proposals, Attend client meetings and site visits, Co-operate with the Quality Management System (QMS) through undertaking administrative activities, Promote the company brand and reputation through and marketing input, Mentoring and training of junior staff, Support regional offices and other departments through knowledge sharing You will have To be successful as a Principal Civil Engineer, you will have a healthy mix of the following: Chartered Engineer (CEng) or Incorporated Engineer (IEng) [working towards CEng] with the Institution of Civil Engineers A degree or HND in Civil Engineering Line management experience including undertaking of appraisals, identification of training and ensuring performance of junior team members, Team management and resource coordination experience, Experience working with local authorities, developers and architects on civil engineering aspects of a range of schemes, Varied experience working on schemes through the planning process; from pre-app through to condition discharge Civil engineering project management experience including projects combining drainage, external works and highways elements. You will get To be successful as Principal Civil Engineer, you will enjoy a competitive salary of up to £60K + Fantastic Package Vitality Healthcare Salary sacrifice scheme for annual leave 24 days holiday plus bank holidays increasing with service Bonus of 10% if targets are achieved Overage bonus Bike to work scheme Working from home 2 days a week if desired Flexible working hours around core hours of 10 - 4 Free parking on site You can apply To the Principal Civil Engineer job by pushing the button on this job posting (recommended), or send CV to (url removed) UK_MS

Operations Manager Competitive salary + Car Allowance + Bonus + Life Assurance South Coast / Hampshire Region A well‑established, highly respected engineering and manufacturing business is seeking an exceptional Operations Leader to manage its end‑to‑end operational function. This role requires a seasoned leader with proven experience of driving performance in a complex, precision‑focused production environment. This role is ideal for someone who thrives in a low-volume, high-accuracy machining or engineered components setting and who can elevate operational standards using data, discipline and strong leadership. The Opportunity Reporting at senior leadership level, you will take full accountability for: Operational performance, KPI management and governance Production, planning and workflow execution Maintenance strategies and equipment optimisation Workforce capability, engagement and leadership development Health, safety, compliance and operational excellence Continuous improvement and Lean initiatives You will shape and execute operational strategy, ensuring the business meets its commitments on quality, performance, delivery and cost. Key Responsibilities Translate KPIs into measurable operational improvements Drive high standards across production, quality and throughput Strengthen controls, reporting discipline and process governance Lead Lean, TPM and CI programmes to enhance efficiency Deliver robust operational plans aligned with business objectives Support CAPEX decisions and champion investment cases Optimise operational budgets, resource planning and cost performance Develop strong internal and external stakeholder relationships Maintain a safe, compliant and audit-ready environment Ensure equipment availability and effectiveness Key Requirements: Proven experience leading operations in a precision machining / CNC environment Strong understanding of low-volume, batch manufacturing Financial and commercial acumen Confident in data-led decision making and ERP systems Lean/CI trained with real examples of delivered improvement A resilient, clear, influential leader with high standards Engineering or professional qualification (HNC/HND/Degree) What's on Offer Competitive salary Car allowance Performance bonus Private healthcare, pension, life assurance Wellbeing and development benefits At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes

Job Title: Test Equipment Engineer – Hardware Location: Portsmouth Broad Oak. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: Up to £50,000 depending on skills and experience Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. Job Description: You will act as a Test Equipment Engineer, delivering comprehensive engineering support for the Spearfish test equipment used within the UK. With this role you will report into the Spearfish test equipment team leader. Daily activities to include maintaining high levels of equipment availability. Also improving and designing new test equipment while working collaboratively as part of the Spearfish Test Equipment Team and contributing to the wider Spearfish In-Service Support Group. Core Duties: Diagnosing a wide range of complex Special to Type Test Equipment to component level where applicable with limited technical support Influence and deliver design obsolescence tasks, implementing new electrical hardware at Broad Oak and customer locations where required Lead and perform a range of development activities including producing design schemes, circuit diagrams, wiring schedules, design documentation, specification and other test process tasks Compile and approve Engineering Designs, Changes, Tasks and Concession actions Responsibility and ownership of a selection of in-service support and test equipment Be involved in the Design and Safety of the Spearfish Torpedo Test Equipment, ensuring that work is undertaken in conformance with Company, Project, National and International Standards and procedures Essential Skills: You’ll be qualified in a relevant Engineering or closely related discipline to HNC/HND/Degree level You’ll have a test equipment/hardware design background You’ll have experience within repair and investigation of test equipment You’ll have an understanding and creation of drawings and circuit diagrams The Spearfish Test Equipment Team: You will work alongside an experienced team of 10 hardware and software engineers. Who report into will report to the Spearfish Test Equipment Team Leader who reports into the TRAM Engineering Manager. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 9th April 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-RB1 #LI-Hybrid