Trabajos industrial engineer en WolverhamptonCrear alertas

Fusion People Recruitment is seeking a professional, self-motivated individual with proven Field Service skills to join our client for the position of a Field Service Engineer. As a Field Service Engineer, you will be experienced in servicing and installing machinery and equipment within manufacturing plants. You should have an electrical bias with knowledge of hydraulic and pneumatic systems. Job role: Field Service Engineer Location: Based in Midlands type area able to cover the UK Salary: Negotiable (depending on experience) Holiday: 25 days plus Bank Holidays Benefits: Pension scheme Primary duties; • Field service of Industrial machines and equipment, • Service and Installation of equipment Candidate Specification; Essential • Experience in field servicing, repair and installation of machinery and equipment within a manufacturing environment, • Experience in pneumatics and hydraulics systems., • Should have an electrical bias., • Ideally knowledge of PLC systems., • Ideally experience of after sales If you are interested and believe you have suitable skills and experience to be considered for this position then please apply. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job. --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Technical Network have been retained by a market leading intelligent industrial control & automation manufacturer who are seeking to compliment their commercial team with an additional Inside Sales Engineer to provides best in class sales support to sales team and customers. Internal Sales Engineer Salary: c£40-45,000 Location: Wolverhampton Role Summary As an Internal Sales Engineer, you will hold technical and commercial responsibility for preparing quotations in response to customer enquiries. Reporting to the Head of Sales, you will work closely with Area Sales Managers, internal teams, suppliers, and customers to deliver accurate, timely, and competitive proposals. This Internal Sales Engineer role will support business growth through the preparation of quotations for products, spares, bespoke solutions for the companies range of industrial automation and robot solutions . Role & Responsibilities: o Prepare quotations for products and spares, including bespoke solutions. o Liaise with customers, suppliers, and internal colleagues to gather required technical and commercial information. o Review customer enquiries and identify the most suitable technical and commercial solution. o Ensure proposals comply with company standards and contractual requirements. o Focus on the timely delivery of proposals for pressure control and metering equipment. o Provide internal sales support throughout the enquiry, quotation, and order process. o Develop an understanding of industrial control and automation products. Experience required: o HNC / BSc or equivalent in Electrical / Electronic Engineering, Mechatronics, Robot Automation or similar technical discipline. o Experience gained in a customer facing commercial role ie: technical sales, engineering sales, quotations, proposals, or internal sales. o Knowledge or background working with industrial automation products such as robotics, PLCs, Motor Controllers/ Drives, Electrical Control Panels, HMI, industrial comms protocols etc would be highly desirable. Full product training will be available on the companies range of products. o Strong business acumen and interpersonal skills. o Confident liaising with customers, suppliers, and internal departments. o Highly IT proficient in MS Office; CRM, MRP/ERP systems . o Ability to manage multiple proposals concurrently. Opportunity: This is a great opportunity for an experienced Inside Sales Engineer or Proposals Engineer to join a business with a reputation for quality, reliability and long-term client relationships, offering engineers genuine project ownership and involvement across the full engineering lifecycle. This is an ideal role for someone seeking an ultimate career in Sales or Account Management. In return the company are offering a competitive salary competitive salary, generous pension scheme, life assurance, 34 days holiday, performance related bonus, private health insurance. In addition there is some flexibility with working hours available. Full product technical training will be provided. Please apply on-line or call our retained consultants @ Technical Network for a confidential discussion technical-network.co.uk Technical Network Recruitment – Search & Selection for mid to senior level appointments for engineering & manufacturing sectors- automotive, aerospace, defence, advanced materials, capital equipment & automation

Project Engineer – Manufacturing 📍 Walsall | £40,000 – £50,000 | On-site Do you enjoy taking ownership of engineering projects from manufacture through to delivery? Do you have experience within machining, welding, metallurgy or testing environments? Looking for a hands-on role within a global engineering manufacturer supplying the energy sector? I’m supporting a global manufacturer of bespoke engineered components used across a range of sectors including Oil & Gas, Energy and industrial manufacturing, who are looking to appoint a Project Engineer in Walsall. The Opportunity This is a highly visible role sitting at the centre of operations, coordinating manufacturing, testing and delivery activities while acting as the key link between customers, suppliers and internal teams. You’ll work across a variety of bespoke engineering projects in a fast-paced and technically challenging environment. What You’ll Be • DoingCoordinating engineering projects through manufacture, testing and delivery, • Managing project schedules, budgets and customer requirements, • Working closely with engineering, production and external suppliers, • Supporting workshop activities including assembly and testing, • Managing project documentation, quotations and reporting, • Ensuring quality and HSE standards are maintained throughout projects What They’re Looking For • Experience in Project Engineering, Manufacturing or Operations environments, • Ability to read engineering drawings and technical specifications, • Background in welding, machining, metallurgy, forging or testing environments advantageous, • Strong organisational and communication skills, • Hands-on, proactive and customer-focused approach Why Consider This Role? • Work on bespoke projects for global customers, • Highly varied role with strong operational exposure, • Opportunity to work closely with manufacturing and testing teams, • Stable engineering business with long-term growth potential If you’re a Project Engineer looking for a dynamic role within advanced engineering manufacturing, I’d be happy to discuss further.

Business Development Engineer (Pumps / Water Treatment) £55,000 - £63,000 Negotiable + Commission + Car Allowance of £5,100 + 25 days holiday Field based / Midlands / Birmingham / Nottingham Are you a technically experienced Business Development Manager from an M&E, Heat Pumps, Water Hygiene, FM, Chemicals or Industrial background looking to work for one of the UK's leading providers of water pump solutions? Would you like to work for a company that is part of a global business offering progression and training with excellent earning opportunities? On offer is a new business development role for a growing business that supplies household brand names such as Whitbread, Tesco and Travelodge. You will have technical sales experience and be part of the growing projects and engineering division whilst being able to demonstrate a track record in bringing in new business. Ideally from an engineering, pumps, industrial or chemical background you will keen for an opportunity with a leading UK business and be part of its continued growth and success. The role: • Identify, develop and nurture business opportunities with new clients, • Working with technical teams to deliver engineering solutions, • Selling full-service solutions, • Understand engineering products and services, along with the ability to communicate complex technical concepts to non-technical stakeholders, • Map out your business in order to maximise all client relationships The person: • Experience in business development or sales, within an engineering or technical services environment, • Proven track record of driving revenue growth and closing large-scale deals, • Experience selling projects and solutions The role requires a blend of technical understanding, commercial acumen, and excellent relationship-building skills to effectively communicate the company's engineering solutions and secure business deals Keywords: Business Development Manager, BDM, M&E, Heat Pumps, Water Pumps, Water Hygiene, Industrial, Manufacturing, Chemicals, Food & Beverage, Engineering Reference Number: BBBH20677 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Technical Sales Engineer Location: South East Salary: up to £50,000 + OTE + company car Industrial Welding Sector Are you ready to take on a career-defining challenge? Join a rapidly growing, R&D-driven company that is revolutionising the industrial welding market. We're an ambitious and well-resourced European manufacturer with a strong presence in the UK, backed by 50+ support staff-and we're just getting started. What's in It for You? • A rare opportunity to shape the success of a future industry leader, • Career growth in a thriving, expanding organization (25+ salespeople across 3 sales teams), • Package worth up to £50k + OTE, with a high-quality EV included, • Health and pension benefits to support your well-being The Role: As an Area Sales Manager / Technical Sales Manager, you'll play a key role in accelerating our growth by: • Introducing our innovative proposition to distributor customers, • Managing and growing the distributor pipeline, • Converting distributors from competitor brands, • Supporting and expanding mutual business opportunities, • Building end-user demand and driving brand preference What we're looking for: • We're looking for a high-calibre individual who thrives in a challenger environment. Able to deliver compelling proposition, • Hungry and comfortable in challenger environment, • Track record of achievement, • Effective in industrial environment, • Good technical understanding / competence To apply: Please send your CV in to This vacancy is being advertised by Aaron Wallis Recruitment and Training Limited operating as an Employment Agency, registered in England No. 6356563. View our Privacy Policy and Candidate Privacy Notice

Business Development Manager (HVAC) Birmingham (Remote) £40,000 - £50,000 (OTE £60,000) + Remote + Training + Commission + Company Vehicle + Benefits Are you a Business Development Manager from a technical or construction background looking for a varied, hands-on role with strong earning potential, full training, and a company vehicle, at a growing business where you'll play a key part in driving expansion? On offer is the chance to join a well-established company with over 30 years of experience in the ventilation industry. You'll be part of a trusted and growing business that works on a wide variety of projects, from private homes to large commercial buildings. The company specialises in modern ventilation systems like MVHR and PIV, giving you the opportunity to work with in-demand technologies while gaining valuable industry knowledge and long-term career stability This is a varied role where you will be responsible for identifying and proactively securing new clients, managing existing relationships, attending industry events, and working with building consultants throughout Great Britain. You will be expected to develop an in-depth understanding of the company's product range, provide technical guidance and demonstrations, and stay current with emerging technologies and market trends. This role would suit a Business Development Manager from a Technical or Construction background who is looking for a role with autonomy, full product training, and the opportunity to gain deep industry knowledge within a well-established and supportive company that values long-term development and career growth. THE ROLE • Ventilation Sales across residential and industrial sectors, • Full training on specialist systems including MVHR and PIV, • Client visits, relationship management, and technical demonstrations, • Monday to Friday, • Hybrid role with nationwide travel THE PERSON • Business Development Manager with a background in HVAC or similar, • Full UK Driving Licence Reference: BBBH19892B Keywords: Business Development Manager, HVAC, Ventilation, Technical Sales, Mechanical Engineering, MVHR, PIV, Construction, Sales Engineer, Birmingham, Hybrid, UK, Remote If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment provider for this permanent position. By applying for this job, you accept the T&Cs, Privacy Policy and Disclaimers which can be found on our website.

Electrical Design Engineer - Renewable Energy (Solar PV). This is an exciting opportunity to support the design and delivery of Solar PV systems across a wide range of commercial and industrial projects. Conduct on-site electrical surveys to assess suitability for solar PV installations.

Industrial Field Service Engineer £35,000-£40,000 (OTE £50,000) + Work Van + Bonuses + Pension + Training West Midlands (Commutable from: Oldbury, Birmingham, Coventry, Dudley, Walsall, Wolverhampton, West Bromwich, Stourbridge, Telford, Stafford) Are you an Industrial Engine

Position: Electrical Engineer Contract: Permanent, Full Time Salary: £35,000 – £42,000 DOE (gold card preferred but not essential) – Plus Company Vehicle & Fuel Card. Location: Wolverhampton, West Midlands (operating mobile around the West Midlands) Industry: Electrical & Mechanical Services (Commercial Buildings) PRS Engineering has engaged with a key client and a leading Electrical & Mechanical Services provider to the Domestic, Commercial & Industrial space. Due to recent contract awards we are looking for x2 Electrical Engineers. Must have experience and preferably be gold carded but experience in the reactive and repair sector is mandatory. Job Role We are currently look for an Electrical Engineer to work alongside the existing Facilities team carrying out reactive visits throughout the Midlands on our range of contracts (Commercial Buildings). Requirements & Qualifications The ideal candidate will need good knowledge of electrical systems • Proven experience as an electrical engineer, • Hands-on experience in working within the maintenance & service industry, • Excellent approach to health & safety following all guidelines required, • Full Driving Licence, • Relevant qualification (gold card preferred but without may be considered) Offer Includes • 21 days holiday + Bank Holidays, • Secure long-term employment, • Company Vehicle, • PPE, • Unifor, • Fuel Card, • Company Pension Scheme, • Pay-care Scheme (after 3 months)

Technical Network have been retained by a market leading intelligent industrial control & automation manufacturer who are seeking to compliment their commercial team with an additional Inside Sales Engineer to provides best in class sales support to sales team and customers. Internal Sales Engineer Salary: to£44,000 Location: Wolverhampton Role Summary As an Internal Sales Engineer, you will hold technical and commercial responsibility for preparing quotations in response to customer enquiries. Reporting to the Head of Sales, you will work closely with Area Sales Managers, internal teams, suppliers, and customers to deliver accurate, timely, and competitive proposals. This Internal Sales Engineer role will support business growth through the preparation of quotations for products, spares, bespoke solutions for the companies range of industrial automation and robot solutions . Role & Responsibilities: o Prepare quotations for products and spares, including bespoke solutions. o Liaise with customers, suppliers, and internal colleagues to gather required technical and commercial information. o Review customer enquiries and identify the most suitable technical and commercial solution. o Ensure proposals comply with company standards and contractual requirements. o Focus on the timely delivery of proposals for pressure control and metering equipment. o Provide internal sales support throughout the enquiry, qu...

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don't worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. Responsibilities include: - Support the Senior Service Engineer in the effective running of the Depot workshop within the region. Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer's specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment. Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy. To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required. Accurately complete all relevant paperwork including engineer's report, off hire, pre/delivery inspection and service sheets. Update system on machine status change i.e. PDI carried out, Machine under repair, 6 monthly statutory Inspection completed. About you: - Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent. Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding. Have a mature outlook and the ability to prioritise tasks and work well under pressure. Understand the importance of excellent customer service. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON™, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry™ control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment TPBN1_UKTJ

Mechanical Design Engineer Dudley, West Midlands Full Time | Permanent An established and well-respected manufacturer of material handling solutions is seeking a Mechanical Design Engineer to join its growing engineering team. Supplying customers across a wide range of industrial sectors, the business designs and manufactures a variety of bespoke and standard products including loading systems, lifting equipment and material handling solutions. The Role Working closely with manufacturing, sales and project teams, you will be responsible for the design and development of both new and existing products, taking projects from concept through to manufacture and installation. This is an excellent opportunity to work on bespoke machinery and engineered solutions within a stable and growing UK manufacturer. Responsibilities Design and develop material handling equipment using SolidWorks. Produce detailed manufacturing drawings, BOMs and technical documentation. Carry out FEA analysis to validate designs and optimise product performance. Support projects from concept design through to manufacture and commissioning. Liaise with customers, suppliers and internal departments to define technical requirements. Support prototype builds, testing and product development activities. Ensure designs comply with relevant engineering standards and legislation. Identify opportunities for product improvements, value engineering and cost re...

Maintenance Engineer Walsall £47,327 basic Permanent Days – Monday to Friday 33 Days Holiday Weekend Overtime Available (Paid at Premium Rates) Working Hours: Monday – Thursday: 07:00 – 16:00 Friday: 07:00 – 13:00 Overtime is available on Saturdays and Sundays, paid at enhanced rates depending on hours worked. About the Company This is an excellent opportunity to join a well-established heavy industrial manufacturer specialising in the metal treatment. The company supplies treated steel products to a range of sectors including automotive, engineering, and industrial manufacturing. The site focuses on chemical treatment processes for steel, improving durability, hardness, and corrosion resistance to meet customer specifications. The facility operates a range of industrial equipment including heat treatment furnaces, quench systems, conveyors, and automated handling equipment. They are currently seeking an electrically biased Maintenance Engineer who holds a Level 3 engineering qualification to support the reliability and performance of plant equipment across the site. Benefits All overtime paid at premium rates External and internal training opportunities 33 days holiday Supportive engineering team with a strong working culture Discounted staff shop for Maintenance Engineers Stable and well-established manufacturing environment Requirements ...

Multi-Skilled Maintenance Engineer Shift Pattern: 4 on 4 off days/nights, 6-6 Salary: £42,000 - £45,000 + Pension + Bonus + Benefits Location: Wednesbury Reference: 7235/MP The Company An excellent opportunity has arisen with one of the UK’s instantly recognisable and highly regarded engineering support companies. Benefiting from continuous improvements to all the manufacturing processes the group works within several sectors across Europe and Latin America including organisations such as hospitals, hotels, restaurants, manufacturing, and pharmaceutical companies. Key Skills Apprentice Trained Engineer in Electrical/ Mechanical Engineering Experience within a PLC Automated Environment * Understanding of PPM Systems within Manufacturing The Role The successful candidate will be responsible for all aspects of day-to-day electrical and mechanical engineering and maintenance activities ensuring work is carried out to the highest standards and maximising machine efficiencies. You will have served a minimum of a full apprenticeship in electrical or mechanical engineering and have experience working within planned and preventative maintenance schedules, project based work within a high speed automated environment. On a day to day basis, you will be responsible for fault diagnostics and repair of a wide variety of automated machines and processes including industrial batch washers, presses, con...

Maintenance Shift Engineer📍 Wednesbury | 💷 £40,385 | 4 On / 4 Off Days & Nights Looking for a maintenance role where no two shifts are the same? Join our engineering team and play a key role in keeping our busy manufacturing site running. If you're a mechanically biased Maintenance Engineer with electrical fault-finding skills, we want to hear from you. What You'll Be Doing Planned preventative and reactive maintenance Fault finding and repairs on a range of production equipment including: Conveyor systems Industrial washing machines Linen presses Dryers Feeders, folders & ironers Steam and chemical feed systems Mechanical: 90-95% Electrical: 5-10% (motors, contactors, sensors, testing & fault finding) No PLC programming or robotics. What We're Looking For Level 3 Engineering qualification (Level 2 considered) Mechanical maintenance experience in manufacturing or production Basic electrical fault-finding skills Overseas qualifications welcomed Shift Pattern 4 Days (06:00-18:00) 4 Off 4 Nights (18:00-06:00) 4 Off 12-hour shifts with 2 x 30-minute unpaid breaks First four weeks are Monday-Friday days for training and induction. What's In It For You?✅ Up to £40,385 including shift allowance ✅ Company pension ✅ 21 days holiday (including Bank Holidays) ✅ Full training and support ✅ Join one of 30 UK ...

Electrical Project Engineer / Manager - South Staffordshire - Up to £60k plus Car allowance. T/O c£10m Working predominantly across commercial, industrial, education, healthcare, leisure and hospitality sectors, you will manage projects from £5k to £5m. Typical projects could include CAT A, CAT B and refurbishment works; Boiler or plant room upgrades, lighting, Fire alarm systems, EV charging infrastructure, chiller and pump replacements, installation of new external gas, water, and fire hydrant services, as well as internal upgrades to offices with state-of-the-art heating, heat recovery ventilation, air conditioning. You will lead and manage mechanical engineering projects, ensuring all phases are executed efficiently and effectively. Coordinate with clients, contractors, suppliers, and internal teams to ensure seamless communication and project progression. Monitor project progress against milestones and deadlines, adjusting plans as necessary to meet targets. Manage project documentation, reports, and compliance with health and safety regulations. For more information please apply online or call James Sampson on (phone number removed) --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website...

.Maintenance Engineer Salary - 38k+ (50k OTE with overtime and production bonus) Location: Wednesbury A market leading industrial manufacturing company are looking for a Maintenance Engineer to join the team at their heavy industry manufacturing facility within the Wednesbury area. The successful maintenance engineer will be working as part of a team of engineers focussing on preventative maintenance and breakdowns. Everyday will be different, priotising will be vital to be succesful in this position Sector - Factory Maintenance Non-Negotiable Requirements for the Multi Skilled Maintenance Engineer: • Multi Skilled Maintenance Engineer, • Worked in an Industrual Manufacturing enviornment, • Electrical Bias Requirements for the Multi Skilled Maintenance Engineer: • Industrial/ Manufacturing experience, • Expereince dealing with Pre Planned Maintenance and Electrical breakdowns Desirable Requirements for the Multi Skilled Maintenance Engineer: • Previous experience working as a Multi Skilled Maintenance Engineer in the UK., • 17th/18th Edition, • Electrical Qualifications If you are interested in this role and feel that you have the right skills then please click apply at the bottom of this...

Reporting directly to the Sales Director, the Business Development Manager will be responsible for managing and developing a portfolio of established accounts, while also identifying and converting new business opportunities across targeted industrial markets. Applicants should be able to demonstrat

Field Service Engineer Software & Automation?? Midlands (Field-Based with UK Travel) ?? £44,000 Basic Salary + 10% Annual Bonus ?? Company Car Included ?? Full-Time | Permanent The OpportunityAn exciting opportunity has become available for a Field Service Engineer to join a globally recognised engineering organisation specialising in advanced industrial tooling and automation solutions. This field-based position offers a high level of autonomy, diverse technical challenges, and the opportunity to work with cutting-edge technology across a wide range of customer sites throughout the UK. If you're a proactive engineer who enjoys problem-solving, customer interaction, and working independently, this could be the perfect next step in your career. Key Responsibilities • Install, commission, and service industrial tooling and automation equipment, • Diagnose faults and optimise the performance of pneumatic, battery-powered, and DC tooling systems, • Support network installations and PLC integrations, • Carry out tool calibration, testing, and certification activities, • Perform preventative maintenance and pre-delivery inspections, • Provide technical support and resolve customer issues from initial diagnosis through to completion, • Identify opportunities for equipment upgrades, service contracts, and additional solutions <...

Job Title - Field Service Engineer Location - Covering Wolverhampton and Surrounds (WV Postcodes) Salary: £30,000 - £37,000 (40 Hours) or £36,000 - £42,500 (45 Hours) Shift:Monday to Friday - 40 Hour or 45 Hour Week available Job Role: I'm working with a market-leading materials handling business that's looking to add an experienced Field Service Engineer to its growing team. This role involves servicing, maintaining and repairing forklift trucks and a range of MHE across customer sites within your local area. As a Field Service Engineer, you'll be responsible for fault finding, diagnostics, planned maintenance and breakdown repairs, with the autonomy to organise your own workload and diary. You'll be fully supported by a strong technical back-office team and benefit from ongoing manufacturer training and development, ensuring you stay up to date with the latest equipment and technologies. Sector - Field Service Maintenance Non-Negotiable Requirements of Field Service Engineer: • Must have hands on Servicing or Maintenance Experience Requirements of Field Service Engineer: • Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles., • Have hands-on experience in the following discip...

Data Cabling Engineer - Walsall We are currently looking for an experienced Data Cabling Engineer to work on a long-term project in Walsall. The role will involve the installation, termination and testing of structured cabling systems within a large industrial environment. Experience working on industrial, manufacturing, utilities or critical infrastructure sites would be advantageous. Duties: • Installation of Cat5e, Cat6 and Cat6a cabling, • Containment installation including trunking, tray and basket, • Termination and testing of copper cabling, • Reading and working from site drawings, • Adhering to site health & safety procedures Requirements: • ECS/CSCS card, • Previous structured cabling experience, • Ability to work independently and as part of a team, • IPAF beneficial but not essential Location: Walsall Duration: Long-term project AMRT1_UKTJ ...

Do you excel at diagnosing complex refrigeration issues and enjoy being the trusted expert for your customers? Our client, a leading global HVAC & Refrigeration company is looking for a skilled Refrigeration Engineer to deliver high-quality, reliable support to their customers. This is a fantastic role for someone who enjoys building relationships and using the latest diagnostic technology to solve complex problems in a field-based position. On Offer: Base salary of up to £48,000 per annum with an OTE of £65,000+ Company van & door to door payment Private Medical Insurance Company bonus Death in service Enhanced pension 25 days holiday + bank holidays and option to purchase additional days Fantastic career progression opportunities Key Responsibilities: Diagnose and repair faults on a wide range of commercial and industrial plants and equipment using cutting-edge diagnostic tools. Carry out planned preventative maintenance, emergency breakdown repairs and commissioning work on customer sites. Act as the main point of contact for your customers, building trusted, long-term relationships. Participating in an on-call rota. Who They’re Looking For: Proven experience as a field-based Service Technician or Refrigeration Engineer. Excellent communication and customer service skills, with the ability to build rapport. * Strong diagnostic and problem-solving abili...

Field Service Engineer – Software & Automation📍 Midlands (Field-Based with UK Travel) 💰 £44,000 Basic Salary + 10% Annual Bonus 🚗 Company Car Included 📄 Full-Time | Permanent The OpportunityAn exciting opportunity has become available for a Field Service Engineer to join a globally recognised engineering organisation specialising in advanced industrial tooling and automation solutions. This field-based position offers a high level of autonomy, diverse technical challenges, and the opportunity to work with cutting-edge technology across a wide range of customer sites throughout the UK. If you're a proactive engineer who enjoys problem-solving, customer interaction, and working independently, this could be the perfect next step in your career. Key Responsibilities Install, commission, and service industrial tooling and automation equipment Diagnose faults and optimise the performance of pneumatic, battery-powered, and DC tooling systems Support network installations and PLC integrations Carry out tool calibration, testing, and certification activities Perform preventative maintenance and pre-delivery inspections Provide technical support and resolve customer issues from initial diagnosis through to completion Identify opportunities for equipment upgrades, service contracts, and additional solutions Complete detailed service reports, documentation, and maintenance reco...

Project Engineer Brand new role due to growth and expansion. You're an experienced Mechanical Engineer who can Project Engineer NPI projects at our West Midlands manufacturing facility and support our Eastern European manufacturing site too. We manufacture a range of precision components, pressings, tooling design and sub assembly for the Automotive, Medical and Industrial markets. BASIC SALARY: Up to £55,000 dependant on your experience BENEFITS: 33 days holiday including bank holidays, 5% pension LOCATION: Dudley, West Midlands COMMUTABLE LOCATIONS: Wolverhampton, Birmingham, Telford, Bridgnorth, Kidderminster, Walsall, West Bromwich, Cannock, Bromsgrove. JOB DESCRIPTION: Project Engineer - NPI - Tooling - Automotive This is a brand-new role because of an internal promotion, taking on a proportion of NPI projects for us across various clients in Industrial, Medical and Automotive. Once up to speed you will need to handle the requirements of 4-5 projects at any one time. Projects typically range from 6-24 months and value ranging from £200,000-£2,000,000. We work in a fast paced ever changing manufacturing environment which occasionally throws up challenging customer delivery expectations. The first 6-12 months in this role will be challenging - pushing your resilience, commerciality and project capability to the test. We recognise we are under resourced, and whilst this is ...

Calibration Engineer (Field Service) £35,000 - £40,000 (OTE £50,000) + Company Van + Benefits West Midlands Are you a Calibration Engineer looking to join a well-established business that offers specialist training, long-term career development and plenty of opportunities to boost your earnings through overtime? This is a fantastic opportunity to become part of an industry-leading organisation, working in a customer-facing field service role where no two days are the same. You'll receive comprehensive training on specialist equipment, allowing you to broaden your technical knowledge while progressing within a growing business. The company has built an excellent reputation for delivering high-quality calibration and testing services across a range of industries. Due to continued growth, they are looking to add another engineer to their skilled service team. This position is ideal for a Calibration Engineer who enjoys working independently, travelling to customer sites and developing their expertise on specialist equipment. The Role: Visiting customer sites to calibrate, inspect and service a variety of specialist equipment. Receiving full product and technical training from experienced engineers. Field based The Person: Experience as a Calibration Engineer, Calibration Technician or similar. Background in calibration, testing, inspection or servicing of industrial equipment. Full UK Driving Licen...

Mechanical Design Engineer Material Handling, Hydraulic Equipment, Industrial Equipment Competitive Salary Plus Car Allowance and Benefits Are you ready to take the next step in your career? This is a fantastic opportunity to join a forward-thinking company as a Mechanical Design Engineer, where your skills and expertise will directly contribute to the design and development of bespoke lifting equipment for heavy engineering applications across the globe. This role offers the chance to work on innovative projects, collaborate with talented teams, and pave the way for future leadership opportunities by shadowing the Chief Engineer with the potential to take over this pivotal role. As a Mechanical Design Engineer you will : Design bespoke lifting equipment, taking projects from concept to detailed manufacturing drawings. Collaborate with sales and manufacturing teams to ensure technical requirements are met. Perform calculations, Excel, and FEA to verify designs and ensure compliance with standards. Provide technical support during production, testing, installation, and commissioning stages. Produce statutory documents, quality records, and operation and maintenance instructions. Manage multiple projects at various stages of development while maintaining high standards of quality and safety. The Mechanical Design Engineer will have: A minimum of an HND in Mechanical Engineering, with a BSc preferred...

Technical Sales Engineer (Water Treatment Projects & Services). Are you a Sales Engineer from an M&E, Heat Pumps, Water Hygiene, FM, Chemicals or Industrial background looking to work for one of the UK's leading providers of water pump solutions?. You will have technical sales experience and part of

Mechanical Fitters | West Midlands | £30,000 - £45,000 + Overtime & Opportunities Are you a hands-on Mechanical Fitter, Maintenance Engineer, or Machine Builder looking for your next move in the West Midlands? We're currently working with a number of established engineering and manufacturing businesses across the region who are actively looking to recruit skilled mechanical engineers into a variety of roles. Whether your background is in maintenance, machine build, service, or heavy engineering, we'd be keen to speak with you. The Roles Opportunities are available across a range of environments, including: • Heavy engineering & manufacturing, • Bespoke machinery & machine build, • Field service & on-site engineering, • Process and production environments Roles vary from workshop-based positions to site-based and mobile service roles, with both day shifts and shift work available. What You'll Typically Be Doing Depending on the role, responsibilities may include: • Mechanical fitting, assembly, and machine build, • Planned and reactive maintenance on industrial equipment, • Fault finding on mechanical, hydraulic, and pneumatic systems, • Installation and commissioning of machinery, • Working from engineering drawings and schematics, • Supporting production and engineering teams to maintain performance

Job Title: Contract Lean Manufacturing Engineer.Manufacturing Engineer, Continuous Improvement, Industrial Engineer.Immediate start available, site based.Real opportunity for a Lean Manufacturing Engineer / Industrial Engineer with a passion for lean / Continuous Improvement to support a key project

Heating Engineer – Commercial Gas (HVAC Training Provided) Salary: Up to £50,000 Location: West Midlands (occasional national travel) Overview We have an exciting opportunity for an experienced Commercial Gas Heating Engineer to join our friendly and professional team in the West Midlands. This full-time role offers a varied workload across a diverse portfolio of clients, including industrial plants, high-end residential developments, and prestigious hotels. This is an ideal role for a commercial gas professional who wants to broaden their skill set into HVAC maintenance — full training and certifications provided. About the Role Working under the guidance of the Service Supervisor and Directors, you will be responsible for the service, maintenance, and repair of commercial heating systems, with the opportunity to expand into HVAC systems over time. While most work is West Midlands-based, you will occasionally travel nationally to support key accounts and project work. What You’ll Be Doing Service, maintain, and repair: Gas-fired heating plant Commercial boilers and water heaters Chilled water systems (training provided) DX systems (VRV, splits, multi-splits – training provided) HVAC and refrigeration equipment (training provided) * Carry out reactive repairs and t...

HVAC / Refrigeration Engineer – West Midlands Field based role Location: West Midlands, UK Travel: Regional Job Type: Full-time Salary: £50,000 – £55,000 per annum (depending on experience) Start Date: ASAP Join a Trusted and Growing Engineering Team We have an exciting opportunity for an experienced HVAC / Refrigeration Engineer to join our friendly and professional team in the West Midlands. This full-time role offers a diverse workload across a broad portfolio of clients, including industrial refrigeration plants, high-end residential developments, trainline facilities and prestigious hotels. About the Role Working under the guidance of the Service Supervisor and Directors, you will be responsible for the service, maintenance, and repair of a wide range of HVAC and refrigeration systems across commercial, domestic, and industrial sites. While most work is West Midlands-based, you will occasionally travel nationally to support key accounts and project work. What You’ll Be Doing Service, maintain and (occasionally) install and commission: Chilled water systems Gas-fired heating plant DX systems (VRV, splits, multi-splits) Industrial and commercial refrigeration systems (chillers, freezers, condensers) Water heaters + boilers/heating systems * Occasi...

MAINTENANCE ENGINEER Job Title - Maintenance Engineer Location - Wednesbury Salary: £42,000 Shift: Days and Nights Job Role of the Maintenance Engineer. A fantastic opportunity which is not to be missed by strong Maintenance Engineer has come to the forefront. This is going to be any engineer's dream to work in this state-of-the-art, fully automated, fast-paced factory. They have recently invested into the site and it's a great place to work for any maintenance engineer who wants to develop their career both technically and/or into management. You will be responsible for carrying out maintenance, fault-finding, and planned preventative maintenance on a range of fully automated production machinery, ensuring maximum uptime and efficiency. Sector - Industrial Manufacturing Non-Negotiable Requirements of the Maintenance Engineer Maintenance experience within an industrial manufacturing environment. Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory. Essential requirements for the Maintenance Engineer. Hands-on electrical and mechanical experience. Recognised engineering qualification. Experience working within a manufacturing or Industrial environment. Desirable Requirements ...

Boiler Engineer / Steam Plant EngineerTipton | £50,000 | Rotating ShiftsThe OpportunityWe are seeking an experienced Boiler Engineer to join a successful manufacturing business in Tipton. You'll be responsible for the safe and efficient operation, maintenance, and reliability of the site's boiler and utility systems, supporting overall plant performance and uptime. Shift PatternMonday to Friday Rotating Shifts: 5:00am – 2:00pm 1:00pm – 10:00pm 9:00pm – 6:00am Key Responsibilities Operate, monitor, and maintain steam boilers and associated plant equipment Carry out planned preventative and reactive maintenance activities Diagnose and repair mechanical and electrical faults Ensure compliance with boiler safety regulations and statutory requirements Complete maintenance records and work orders through the CMMS system Support plant shutdowns, inspections, and improvement projects Monitor utility performance and identify opportunities for efficiency improvements Follow Permit to Work procedures and site safety standards About You Previous experience as a Boiler Engineer, Steam Plant Engineer, Utilities Engineer, Boiler House Operator, or similar Strong knowledge of steam generation and boiler systems Mechanical maintenance experience within an industrial or manufacturing environment Excellent fault-finding and problem-solving skills Understanding of boiler compliance, sa...

Installation & Commissioning Engineer Home Based | Midlands Preferred | Up to £46,000 + Bonus + Company Vehicle + Private Healthcare Our client is a market-leading supplier of industrial packaging machinery with over 85 years of success in the UK market. With more than 5,000 machines installed nationwide and partnerships with leading European and Japanese manufacturers, they continue to grow and invest in their engineering team. Due to continued expansion, they are seeking an Installation & Commissioning Engineer to support customers across the UK. The Role This is a varied, hands-on position involving the installation, commissioning and optimisation of industrial machinery at customer sites throughout the UK. Responsibilities will include: Installation and commissioning of industrial packaging machinery Troubleshooting and technical support during and after installation Conducting machine performance trials Training customer operators and maintenance teams Supporting Field Service Engineers with technical issues Working alongside suppliers and specialist engineers during major projects Acting as Installation Lead on larger projects when required About You We are looking for an engineer with a strong electro/mechanical background and experience working on industrial machinery. You should have: A good balance of electrical and mechanical engineering skills *...

Job Title - Field Service Engineer Location - Covering Wolverhampton and Surrounds (WV Postcodes) Salary: £30,000 - £37,000 (40 Hours) or £36,000 - £42,500 (45 Hours) Shift:Monday to Friday - 40 Hour or 45 Hour Week available Job Role: I'm working with a market-leading materials handling business that's looking to add an experienced Field Service Engineer to its growing team. This role involves servicing, maintaining and repairing forklift trucks and a range of MHE across customer sites within your local area. As a Field Service Engineer, you'll be responsible for fault finding, diagnostics, planned maintenance and breakdown repairs, with the autonomy to organise your own workload and diary. You'll be fully supported by a strong technical back-office team and benefit from ongoing manufacturer training and development, ensuring you stay up to date with the latest equipment and technologies. Sector - Field Service Maintenance Non-Negotiable Requirements of Field Service Engineer: Must have hands on Servicing or Maintenance Experience Requirements of Field Service Engineer: Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles. Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics. Recognised Engineering Qualification. Full UK Driving License Desirable Requirements o...

Senior Protection and Control Design Engineer (SCADA). As a Senior P&C Engineer you will be working on engineering and construction projects primarily in industrial, transmission/distribution and renewable sectors. Preparation of Protection and Control design deliverables, feasibility studies, repor

Are you ready to take your design engineering career to the next level? This is your chance to be part of a company that's at the forefront of creating bespoke mezzanine floor solutions for a diverse range of industries. With a reputation for innovation, precision, and excellence, this company offers an inspiring work environment where your skills as a Tekla Structures Design Engineer will truly shine. You'll have the opportunity to work on exciting projects, collaborate with a highly skilled team, and make a real impact within the structural steelwork industry. What You Will Do: • Develop detailed 3D models of mezzanine floor structures using Tekla Structures software., • Create precise fabrication and assembly drawings for manufacturing and installation., • Collaborate with clients, project managers, and stakeholders to understand and deliver tailored project requirements., • Interpret structural analysis calculations and drawings to generate accurate models., • Provide technical support during the fabrication and installation phases., • Maintain and update project documentation in line with company procedures. What You Will Bring: • A minimum of 3 years' experience using Tekla Structures for structural design, ideally in mezzanine floors or structural steelwork., • Strong knowledge of structural steel design and fabrication processes., • Familiarity with British Standards and Eurocodes., • Excellent analytical skills and attention to detail., • The ability to manage multiple projects and meet tight deadlines while working collaboratively within a team. This role is pivotal in ensuring the delivery of high-quality, innovative designs that align with the company's mission to provide exceptional solutions to its clients. By joining this team, you'll contribute to the seamless integration of design and manufacturing processes, ensuring every project meets the highest standards of quality and functionality. Benefits: Competitive salary. Health and wellness benefits. Professional development and training opportunities. Supportive and collaborative work environment. Opportunities for career growth within the company and the broader group. Operating hours, 8am to 4.30pm Monday to Friday. Location: This role is based in Brierley Hill, West Midlands, a location that offers excellent connectivity and a thriving industrial community. Interested?: Don't miss out on this fantastic opportunity to advance your career as a Tekla Structures Design Engineer. Apply now to join a company where your expertise will be valued, and your career will flourish! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

We are recruiting a Door Engineer to work on industrial doors, gates and barriers across the Midlands. This Door Engineer role includes installation, servicing, repairs and electrical diagnostics. As a Door Engineer, you will need an electrical bias, strong fault‑finding skills and hands‑on experience with commercial door systems. If you are a Door Engineer with DHF Level 2, NVQ Level 2 or experience across doors, gates and barriers, this position suits a Door Engineer with an electrical bias and strong diagnostic ability. Key Responsibilities Install, service and repair automatic, industrial doors, gates and barriers Electrical diagnostics, sensors, control panels and safety systems Fault‑finding and commissioning Complete job sheets and maintain safety compliance Required Skills & Qualifications DHF Level 2 NVQ Level 2 (relevant discipline) Electrical bias and diagnostic ability Experience with doors, gates and barriers Full UK driving licence Preferred Experience BSEN16005 Automatic doors, industrial doors, gates and barriers Multi‑skilled background Salary & Package £18 per hour (£37,440 basic) Paid door-to-door. On-call rota: 1 in 9 weeks, Call‑out pay: £50 minimum, 3‑hour guaranteed pay Company van with sat‑nav, private use and spouse use allowed 33 days annual leave paid at 10 hours per day (worth approx. £1,000 extra per year) Laptop, mobile phone and PPE and equipment provided Premium overtime after 8 hours with ample availability Life insurance and sickness cover Specialist training on premium products Midlands region * Mixed install and service workload Apply today Take the first step towards an exciting future as a Door Engineer. Call our recruitment team or upload your updated CV, and we'll be in touch with you shortly to discuss this fantastic opportunity

Refrigeration & HVAC Engineer Monday Friday / 8am 5pm £19.91 + per hour (DOE) Aldridge WS9 Temporary Permanent We are seeking an experienced Refrigeration & HVAC Engineer to take ownership of all refrigeration and HVAC plants across our site. You will be responsible for maintaining cold chain integrity, ensuring regulatory compliance and keeping critical systems operating safely, efficiently and reliably. Key Responsibilities: Carry out planned preventative maintenance (PPM) across refrigeration and HVAC systems. Diagnose faults and perform reactive repairs to minimise downtime. Specify, install, commission and test new or modified plant and equipment. Maintain F-Gas compliance, including leak checks, refrigerant records and gas handling. Own and maintain the site F-Gas register. Monitor and maintain cold chain integrity and temperature compliance records. Support food safety and audit requirements, including BRC standards. Act as the site's technical authority for refrigeration and HVAC systems. Manage plant documentation, service records and asset history. Support wider maintenance and project activities when required. What Were Looking For Essential: F-Gas Category 1 certification. Extensive experience maintaining commercial or industrial refrigeration and HVAC systems. Strong fault-finding and diagnostic skills. Experience managing PPM schedules, F-Gas records and cold chain monitoring. Knowledge of refrigeration systems including cold stores, blast chillers, glycol systems, AHUs and air conditioning. Excellent record-keeping and computer literacy, including maintenance management systems. Desirable: HVAC or air conditioning qualification (e.g. City & Guilds 2079). Electrical Installation Level 2 qualification. Experience within food manufacturing or chilled environments. Knowledge of BRC and food safety audit requirements. Experience using monitoring systems such as xweb. Additional Information: This role requires flexibility to work in challenging environments, including hot and cold conditions, working at height and lone working. Availability for emergency callouts and occasional weekend work is essential. TPBN1_UKTJ

The Job People are currently looking for HVAC Engineer for our manufacturing client based in Walsall. Details of a HVAC Engineer Monday - Friday (Overtime Opportunities) Morning, 7am till 4pm £19.91 per hour As a HVAC Engineer based in Walsall. you are reqired but not limited too. F-Gas Category 1 (all refrigerant groups) Accurate compliance record-keeping Computer literate Extensive refrigeration & HVAC maintenance (commercial or industrial) PPM ownership, F-Gas records and cold chain monitoring Commissioning and testing of new or modified plant Refrigeration and HVAC systems - cold stores, blast chillers F-Gas Regulations and cold chain compliance obligationsIf you are interested in this role within the manufacturing and production industry as a HVAC Engineer in Walsall. The Job People is acting as an Employment Agency in relation to this vacancy. We are an Equal Opportunities employer and welcome applications from all backgrounds. We do not charge candidates any fees or request deposits at any stage of the recruitment process. By applying for this position, you agree to The Job People holding and processing your personal data in accordance with our Privacy Policy on our website

A leading manufacturer in the Dudley area are looking for a skilled Toolmaker with experience in the press industry, specifically with Progression Tooling and exposure to EDM The ideal candidate will be a hard-working and adaptable Engineer with a strong technical background within a fast-paced manufacturing environment. Operating in a fast-paced environment, you will report to the Toolroom Manager and provide effective planned maintenance on progression tooling, amongst other responsibilities Role: Toolmaker Location: Dudley Salary: £40,000 Shift: Days (early Friday finish) The key responsibilities of the Toolmaker role will be:  Adhere to all Health & Safety procedures and company policies.  Support the development of new tooling and modifications to existing tooling, working from engineering drawings and technical specifications.  Fit, trial, debug, and modify tooling, carrying out press try-outs as required.  Monitor tooling performance within production areas, identifying repair requirements and improvement opportunities.  Strip, inspect, repair, maintain, and rebuild production tooling.  Work closely with production setters to ensure tooling issues are resolved efficiently and tooling is returned to service promptly.  Attend machine breakdowns, diagnose root causes, and implement effective solutions.  Operate a range of hand tools and workshop machinery, including lathes, milling machines, presses, and grinders.  Use precision measuring equipment such as micrometers, gauges, and Vernier calipers to verify tooling dimensions.  Carry out routine maintenance on power press tooling ranging from 20 to 300 tonnes, including progression and secondary operation tools.  Manufacture and maintain jigs and gauges.  Prepare reports and maintenance documentation as required.  Contribute to continuous improvement and productivity enhancement projects. The key requirements of the Toolmaker will be:  Apprentice trained with a relevant engineering qualification or hands-on Toolroom experience  Strong mechanical fault-finding and problem-solving skills.  Experience in Progression Tooling and some exposure to EDM.  Ability to read and understand technical engineering drawings.  Experience operating potentially hazardous machinery Please apply online or contact (url removed) for a confidential conversation Executive Network Group, encompassing Technical Network, Network HR, HSE Network & Procurement People, sourcing mid to senior level management for automotive, aerospace, engineering and manufacturing industrial sectors, with a portfolio of services including executive search, advertising, MRO for permanent and interim contract recruitment services

Electronics Design Engineer - Test Systems Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Electronics Design Engineer - Test Systems Reporting To: Manager, Test Systems Design Work Schedule: Onsite Wolverhampton, GBR Moog Wolverhampton are currently recruiting for a Electronics Design Engineer - Test Systems at our facility in Wolverhampton. The Electronics Design Engineer will be responsible for the development of application specific electronic and electrical solutions, from concept to detailed design, for integration into complex Test Equipment Systems. These Test Systems support the Qualification and Production Acceptance testing of a wide range of Moog Aircraft Flight Control Systems and Components. The Electronic/ Electrical Design Engineer will support the role of Technical Review in the provision of Test Equipment Electronic/ Electrical Solutions within Moog Aircraft Group. You will play a key role in maintaining strong relationships with suppliers and internal stakeholders, supporting efficient financial operations across multiple UK sites. Key Responsibilities Design analogue and digital electronic solutions to support the production and control of a wide range of hydro-mechanical & electro-mechanical Test Systems Application of safety and industry standards and guidelines in the design and integration of electronic and electrical solutions into Test Equipment Systems. Application of: top-level architecture, requirements definition, concept, design, verification & validation methods and final release for Test Systems. Assist the Test Systems Design Manager with the definition of electronic/ electrical solutions in the creation of detailed Test Equipment Proposals. Prepare and release documentation in support of the Test Equipment Common Development Process, including active participation at technical reviews with peers and Chief Engineers. Support Root Cause investigations into all aspects of the Test Equipment System and/ or components as required. Identify appropriate training courses to maintain electronic / electrical capabilities within Moog Wolverhampton Test Equipment Group Ensure all Health & Safety practices are followed and, any new issues raised during any work activities. Write or assist with the completion and review of work related Risk Assessments. What Youll Bring Bachelor Degree, preferably a Masters, in a relevant Electronic/ Electrical subject area as a minimum. Demonstrable commercial experience of complex analogue and digital electronics design. Particularly with application to closed loop control and transducer conditioning. Experience of the design and manufacture of industrial machines Minimum of 3 years experience in the development of Electronic/ electrical solutions for multi-axis, closed loop, servo-hydraulic and electromechanical Test Systems. Including the design, selection and application of Safety Related Equipment, PLCs and Motor Drive systems. Additional recognised qualifications in the application of Safety related Directives and Standards would be advantageous. Proficient in the use of diagnostic equipment to fault find electronic and electrical issues from first principles. Experience in one or more of the following: eCAD, PCB Software, LabView, DOORS, JIRA, MatLab and SubVersion is advantageous. Proficient in the use of Microsoft applications including Excel, Word, VISO and Project. Knowledge of PC operating platforms (DOS/ Windows/ Microsoft Environments) and Low Level Programming (C++, Visual Basic) We review applications on an ongoing basis, and the job posting will be closed once a suitable candidate is selected. We recommend all interested individuals to apply as soon as possible. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog Can Offer You You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6% and Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Heating Development Engineer Commercial & Industrial HVAC - Wednesbury Office Based Commutable from: Walsall, Dudley, Tipton, West Bromwich, Oldbury £30,000 - £35,000 Basic Salary + Progression + Training + Benefits Are you familiar with commercial or domestic heating systems?OR Do you enjoy being hands-on, tinkering, and knowing how stuff works? Interested in an environment that focuses on training and progression opportunities with succession planning and longer-term career focus?This may be the ideal opportunity for you. Our client is looking for a mechanically biased hands-on engineer to help with their R&D. Your Role as a Heating Development Engineer: Based daily from the Wednesbury and working with the development manager. This role is heavily hands-on and practical (70%) rather than theoretical. You'll be looking at existing products and systems and determining how they can be modified or improved. Working with valves, fans, heat exchangers, and PCB's amongst other parts. Looking at competitors products. The remaining 30% of the role will include: Updating product certification. Provide technical support to the wider engineering team and customers. General day-to-day admin. Mon - Fri position, 35 hours per week, starting between 7am and 9am as you need.Ideal Background for the Heating Development Engineer Position: Some mechanical hands-on skills and a genuine interest in engineering, development, and ideally, heating. This role would suit a domestic/commercial heating engineer looking to come off the tools. It could also suit an engineer from the Armed Forces, or somebody who has completed a mechanical engineering qualification or apprenticeship and looking for a new challenge. Have an inquisitive, methodical attitude. Strong communication skills. Able and willing to commute daily to Wednesbury. Full right to work in the UK as sponsorship cannot be provided.The Company recruiting for the Heating Development Engineer: This renowned manufacturer is looking to grow and strengthen their Research and Development team. Leader with over 100 years' experience in the commercial and industrial HVAC space. They can offer genuine employee career development and extensive on-going training.The Package for a Heating Development Engineer: £30,000 - £35,000 depending on experience. Training, support, and progression to project management. Pension & benefits. 20 days holiday plus bank holidays.Please apply for this job online if you are interested and feel you fit the above criteria. Dave is the main point of contact for the role. INDENG

Multi Skilled Engineer Care & Rehabilitation Services HMP Oakwood, Wolverhampton, WV10 7QD Salary £33,063.00 per annum Permanent, Full Time (40 hoursper week) Benefits: Company Pension, free on-site parking, on-site canteen, ongoing training and development and access to High Street Shop discounts. HMP Oakwood is an innovative prison which has been highlighted by HM Inspectorate of Prisons as an Impressive institution, with a culture of decency and respect. Driven by courageous leadership, excellent peer-led initiatives and outstanding management of learning and skills provisions. Within Care and Rehabilitation Services, the philosophy of our prisons is to rehabilitate offenders and equip them to re-integrate into mainstream society on release. We seek to normalise prison conditions as far as possible to reflect life in the outside community. Our aim is to create an environment in which staff and prisoners feel safe and causes of prison stress are minimised. Central to our philosophy is the relationship between staff and prisoners. Our training and operational practices emphasise the need to treat prisoners with dignity and respect and staff build positive and supportive relationships with the prisoners in their care. HMP Oakwood is one of the largest prisons in England and Wales, providing places for up to approximately 2100 Category C male prisoners. We now have an opportunity for a Multi Skilled Engineer to join our Facilities Management team at HMP Oakwood who will be required todeliver both planned and reactive maintenance to assets, building fabric, services and utilities in order to maintain a safe and decent environment across the prison estate. Key Responsibilities Operate within planned maintenance procedures for assets etc, effectively and safely within their range of qualifications, levels of competence, training and experience. Deal effectively and safely with breakdowns and damage to assets etc. within their range of qualifications, levels of competence, training and experience as required and by out of hours response where necessary. Write up maintenance reports and technical procedures for Building Maintenance Activities. Assist in the training and development of other maintenance/technical staff involved in site maintenance activities. Carry out maintenance inspection and repairs to various types of heating, water, ventilation, mechanical equipment and services on site, where necessary and within their range of qualifications, levels of competence, training and experience Diagnosing faults on all mechanical support systems and rectifying where necessary and within their range of qualifications, levels of competence, training and experience. Following detailed drawings and operational maintenance manuals in order to carry out all planned maintenance, routine inspections and reactive repairs. Carry out maintenance inspection and repairs to various assets, building fabric throughout the prison estate, e.g. furniture, internal /external fixtures and fittings, grounds, access and car parking, etc. Assisting in the development of maintenance routines, procedures, risk assessments, preparing and maintaining relevant technical records. Working with other craft qualified, semi-skilled maintenance staff to develop cross-skilling and cover all levels and aspects of maintenance activities on a team work basis. Participate in emergency call out arrangements and provide cover where necessary during sickness absence periods. Carry out maintenance activities to assist in project and improvement development works, offering alternatives to improve the effectiveness of the operation of the site, review current legislation / regulations within their range of qualifications, levels of competence, training and experience. The successful candidate must have experience of buildings and facilities maintenance and be fully qualified and experienced within a mechanical engineering discipline (City & Guilds / Level 3 NVQ in Mechanical craft studies or equivalent) together with experience of Industrial / Plumbing installations. The following would be desirable but arent essential; Specialismsin HVAC systems, Gas systems/equipment maintenance A/C repairs and maintenance Legionella & WRAS Controls and regulations Experience of BMS systems Full, clean driving licence If you join us, you can be sure that youll find a secure, friendly and professional working environment and be given all the support, training and encouragement you need to build and develop a successful career with us. Equality and Diversity is an important part of Care and Rehabilitation Services. We actively encourage applications from all backgrounds and are a fully inclusive employer who aims to support all employees to be their true selves. We are happy to discuss any reasonable adjustments for either the role or during the recruitment process Care and Rehabilitation Services is committed to safeguarding and promoting the wellbeing of children and adults at risk and each employee is expected to support these goals. Please note that these vacancies are subject to a 5-year checkable history and the strict vetting standards set by the business and the Secretary of State for the Home Office and are exempt from the Rehabilitation of Offenders Act. You must be eligible to work in the UK, and you will need to provide full details of your employment and education history for the last 5 years as part of the security screening process for this role. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to. TPBN1_UKTJ

Quality Control Manager Foundry Manufacturing | £50,000 Are you a hands-on Quality professional who enjoys solving problems on the shop floor rather than from behind a desk? Do you have foundry or heavy manufacturing experience and want the opportunity to shape the future of a growing quality function while working closely with customers, production teams, and senior leadership? Our client is a successful and rapidly expanding UK manufacturing business supplying high-integrity cast components into demanding industrial sectors worldwide. Following significant growth and continued investment, they are now looking to appoint an experienced Quality Control Manager to play a key role in the transformation of their quality department. This is far more than a traditional quality role. It's an opportunity to become the vital link between customers, production, sales, and quality, helping drive standards, solve problems, and improve performance across the business. The Opportunity The business is currently investing heavily in its quality structure, with a new Quality Assurance Manager joining the team and a clear strategy to separate quality process management from product quality ownership. As Quality Control Manager, you will take ownership of product quality throughout the manufacturing process and lead a team of Quality Engineers and Technicians. Working alongside the QA Manager, Production teams and Directors, you'll be instrumental in reducing defects, improving customer satisfaction, and embedding a proactive quality culture throughout the operation. This is a highly visible position with direct access to senior leadership and the opportunity to influence how quality is managed across the business. What You'll Be Doing - Leading day-to-day quality control activities across multiple manufacturing areas. - Acting as the key liaison between customers, production, quality and sales teams. - Managing and developing a quality team with direct responsibility for approximately 8-12 personnel and wider influence across a larger team. - Investigating customer complaints, returns and quality concerns through structured root cause analysis. - Working directly with production teams to identify, implement and verify corrective actions. - Driving improvements in casting quality, process control and defect reduction. - Leading product quality initiatives throughout core making, moulding, melting, pouring, finishing and final inspection operations. - Conducting internal audits and supporting customer and supplier audit activities. - Visiting customers where required to understand issues firsthand and strengthen customer relationships. - Monitoring quality data, trends and KPIs to identify improvement opportunities. - Supporting continuous improvement initiatives and helping embed best practice throughout the business. This Is A Hands-On Role Success in this position will come from being visible, approachable and actively involved in the manufacturing process. We're looking for someone who enjoys spending time on the shop floor, engaging with operators, understanding challenges at source and driving practical solutions. Approximately 60% or more of your time will be spent within the production environment, working closely with teams and supporting improvements where they matter most. If you're looking for a purely office-based quality role, this won't be the right fit. What We're Looking For - Previous experience within a Quality Management, Senior Quality Engineer or Quality Supervisor position. - Strong foundry, castings, metals, heavy manufacturing or similar process industry experience. - Sound understanding of ductile iron casting processes and quality control principles. - Proven ability to lead investigations and deliver effective root cause analysis. - Experience dealing directly with customers and managing quality-related relationships. - Strong communication skills with the ability to influence stakeholders at all levels. - Experience conducting audits and working within ISO quality management systems. - A proactive, solutions-focused approach with a willingness to get involved and lead from the front. Desirable Experience - Qualified Internal Auditor or Lead Auditor. - Six Sigma Yellow Belt or similar continuous improvement qualification. - First Aid qualification. - Experience within high-integrity castings or critical component manufacturing. Why Join? - Opportunity to play a leading role in a significant quality transformation programme. - Join a business experiencing substantial and sustained growth. - Work directly with senior leadership and have genuine influence on business performance. - Strong long-term career progression opportunities within the organisation. - Established support network including a new Quality Assurance Manager and experienced leadership team. - High levels of job security supported by a strong order book and long-term customer relationships. - Opportunity to work with globally recognised industrial customers. - Competitive salary of £50,000 plus benefits. The Culture The business prides itself on investing in its people and creating long-term careers. The interview process is designed to be conversational and collaborative, focusing on finding the right individual rather than putting candidates under pressure. For an ambitious quality professional looking to take the next step in their career and make a genuine impact, this represents an outstanding opportunity

MAINTENANCE ENGINEER Job Title - Maintenance Engineer Location - Wednesbury Salary: £42,000 Shift: Days and Nights Job Role of the Maintenance Engineer. A fantastic opportunity which is not to be missed by strong Maintenance Engineer has come to the forefront. This is going to be any engineer’s dream to work in this state-of-the-art, fully automated, fast-paced factory. They have recently invested into the site and it's a great place to work for any maintenance engineer who wants to develop their career both technically and/or into management. You will be responsible for carrying out maintenance, fault-finding, and planned preventative maintenance on a range of fully automated production machinery, ensuring maximum uptime and efficiency. Sector - Industrial Manufacturing Non-Negotiable Requirements of the Maintenance Engineer Maintenance experience within an industrial manufacturing environment. Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory. Essential requirements for the Maintenance Engineer. Hands-on electrical and mechanical experience. Recognised engineering qualification. Experience working within a manufacturing or Industrial environment. Desirable Requirements for the Maintenance Engineer. Experience working as a Maintenance Engineer in the Manufacturing sector. The Maintenance Engineer will benefit from: Working for a market-leading manufacturing business. Company benefits package including pension, life insurance, and gym access. Training and development opportunities. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Waheed Anjum at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Electrical Testing Electricians Salary: Circa £50,000 basic (45-hour week) + overtime OTE: £65,000 - £73,000+ per annum Location: West Midlands base with nationwide travel Our client is a well-established and highly respected electrical contractor delivering installation, testing, compliance and energy-efficient electrical solutions across the commercial, industrial, logistics, retail and public sectors throughout the UK. Due to continued growth and the award of several major projects, they are looking to recruit experienced Electricians with Inspection & Testing qualifications who are keen to further develop their careers within electrical testing and compliance. This is an excellent opportunity for time-served Electricians who have gained testing experience and hold the relevant qualifications to transition into a more testing-focused role whilst continuing to work on a diverse range of commercial and industrial projects nationwide. The business delivers a wide range of services including electrical compliance testing, inspection and commissioning, LV distribution systems, lighting and emergency lighting installations, EV charging infrastructure, fire alarm systems, power distribution, security systems and wider electrical infrastructure projects. Flexibility to travel and lodge away from home when required is essential. The Role • Carrying out fixed wire testing, inspection and certification on commercial and industrial electrical installations, • Producing Electrical Installation Condition Reports (EICRs), • Completing inspection, testing and commissioning activities on new and existing installations, • Identifying faults, defects and non-compliances and recommending remedial actions, • Supporting electrical installation and compliance projects across a variety of sectors, • Working on logistics facilities, commercial premises, retail environments and public sector buildings, • Ensuring all work is completed in accordance with current BS7671 regulations and company procedures, • Maintaining high standards of health, safety and quality at all times, • Travelling nationwide and lodging away from home as required Requirements • Time-served Electrician with commercial and/or industrial experience, • Previous experience carrying out electrical testing, inspection and fault finding, • City & Guilds 2391, 2394/2395 or equivalent Inspection & Testing qualification, • NVQ Level 3 in Electrical Installation or equivalent, • 18th Edition Wiring Regulations qualification, • Good understanding of BS7671 regulations and electrical compliance requirements, • Experience producing or assisting with EICRs would be advantageous, • Full UK driving licence, • Ability to work independently and manage workloads whilst working away from home Package • Circa £50,000 basic salary based on a 45-hour week, • Significant overtime available with realistic earnings of £65,000 - £73,000+ per annum, • Company van, • Fuel card, • Mobile phone, • Laptop, • Pension scheme, • Paid holiday, • Company sick pay, • Ongoing training and development, • Long-term career progression into a dedicated Electrical Test Engineer position, • Opportunity to join a growing organisation with a strong pipeline of national projects This opportunity would suit an ambitious Electrician with Inspection & Testing qualifications who is looking to move into a more testing-focused role, increase their earnings and develop a long-term career within electrical compliance and inspection across a wide variety of projects throughout the UK. For further information on these opportunities please call Leigh or email your CV for details

Industrial/Manufacturing Engineers - Manufacturing Automation Project (Contract) Outside IR35 Duration: Approximately 6 weeks Hours: 40 hours per week Monday - Friday Start: Project-dependent Location: Wolverhampton/Telford Rate: £45.00 an hour We are seeking an Industrial Engineer to support a major assembly line automation project within a manufacturing environment. The successful candidates will be responsible for assessing current production processes, conducting detailed line balancing studies, identifying efficiency improvements, and quantifying potential cost and productivity savings. The findings will help shape a significant automation investment programme. Key Responsibilities: • Assess existing assembly line operations - Conduct detailed line balance and workflow analysis - Identify opportunities for automation and process improvement - Quantify labour, productivity, and cost-saving opportunities - Produce recommendations and supporting data for business case development This is an excellent opportunity to contribute to a large-scale manufacturing transformation initiative with a focus on automation, efficiency, and operational excellence