Trabajos inspection en BordonCrear alertas

Building Services Engineer (Electrical bias) \n Bordon \n £38,000 - £42,500 \n \n The Building Services Engineer (BSE) is responsible for delivering planned and reactive maintenance across Hard and Soft FM systems, ensuring high availability and statutory compliance of FM-controlled assets. \n The role spans electrical, mechanical and specialist systems including, but not limited to: Building Management Systems (BMS), uninterruptible power supplies (UPS), fire detection and suppression, emergency lighting, closed-circuit television (CCTV), access control, water hygiene and legionella control, and critical HVAC/mechanical plant. The BSE will act as an Authorised Person (AP) under JSP375 and within Systems of Work , exercising permit-to-work control, isolations and handover, and ensuring that all work is completed safely and to specification. \n The role will use the CAFM system to plan, record, and optimise maintenance activities, and will support infrastructure works delivered via approved subcontractors. \n The BSE will primarily be based at Bordon and may be required to travel to other sites within the contract as directed. Participation in the on-call rota is required, with a call-out allowance paid in accordance with contract terms. \n \n Requirements: \n\n • Qualified Electrician to BS 7671 (18th Edition).\n, • Inspection, Testing & Certification qualification (e.g., City & Guilds 2391/2) - desirable.\n, • Authorised Person (AP) appointment under JSP375 (e.g., LV; HV desirable) - training/appointment provided if not currently held.\n, • Demonstrable experience maintaining and fault-finding across BMS, UPS/generator systems, fire detection/suppression, emergency lighting, CCTV and access control, HVAC/mechanical plant, and water hygiene/legionella controls.\n, • Experience operating within a permit-to-work and Safe Systems of Work environment, with strong understanding of risk assessment and control of work.\n, • Competent IT user: CAFM (Agility) and MS Office; ability to update O&M and compliance records.\n, • Eligible for Security Check (SC) clearance.\n, • Full UK driving licence (car/van).\n\n \n For more information please call David Bates @ ARM on \n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.

Pertemps are working with an established manufacturing business located in Alton who are looking for an experienced CNC Setter and Operator to join their growing team. Responsibilities as a CNC Setter and Operator :\n\n • Setting and operating of two different CNC Machines, predominately lathes \n, • Inspection of own work to ensure it meets quality standards\n, • Reading technical drawings \n, • De-burring\n, • Manual Turning/ milling\nRequirements:\n\n, • Experience in setting and operating CNC Machines\n, • TIG welding experience is advantageous\n, • Hard working and reliable\n, • Excellent attention to detail\n, • Ability to work as part of a small manufacturing team. \nThe CNC Setter & Operator role:\n\n, • Based in Alton \n, • Monday – Friday, 8am – 4.30pm\n, • £14 per hour, rising to £14.50 after 3 months \n, • 20 days annual leave plus bank holidays (increasing with length of service)\nIf you are interested in this CNC Setter & Operator position, please apply below or get in contact with Jemma at Pertemps.

Quality Technician£28,000 - £32,000 + Extensive Training + Progression + No WeekendsAlton, Commutable from: Winchester, Petersfield, Farnham, ReadingDo you have a Manufacturing/Quality background looking to work for a rapidly expanding business who offer a highly varied role, on the job training and long-term job security?On offer is an opportunity to join a tight knit team where you can enhance your skillset and maintain a great work-life balance whilst working in a Monday - Friday role.This well-established company, offer niche Technical services including Machining, Finishing and Assembly to Aerospace, Defence, Medical, Electronics and other industries.You will be responsible for ensuring the quality of company products alongside the inspection/release of incoming materials.This role would suit a candidate with a Quality background who is looking to work for a established company in a fast paced, varied working environment.The Role: \n\n • Identify manufacturing faults\n, • Working within niche industries\n, • Monday - Friday\n\n The Candidate: \n\n • Mechanical engineering background\n, • Quality experience, 1 article inspection\n, • Familiar with latest ISO 9001:2015 standard\n\n Reference Number:BBBH276526To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sam Claridge at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Precision Machining / GrindingSibert Instruments is an established OEM that has been specializing in the design, manufacture and supply of high-precision industrial machinery to clients worldwide for over 40 years. We are expanding again and looking for a conscientious, detail-orientated Machine Cylindrical & Machine Surface Grinder to join our experienced and friendly team. Appropriate training will be provided as necessary.Job Description:The successful applicant will be responsible for machine finish grinding high precision tooling and components to meet micron tolerances from technical drawings. Reporting to the workshop manager, you will demonstrate the ability to work both independently and as part of our team. The role will also include piece part inspection to a high level of consistency and accuracy.Key Responsibilities:Set up and operation of precision machines for internal and external grinding.Working from technical drawings to specified tolerances.Inspection of ground parts throughout the manufacturing process.Demonstrate a robust understanding of safety procedures.Maintain a clean working environment.Requirements:Open minded and thorough approach to detailed work.Any relevant technical qualification or apprenticeship would be welcome.Any machine grinding or manual machining experience would be an advantage.Important:We are more than willing to provide extensive training and guidance during the induction period.We are looking for the right mind-set, so if you havent used a manual Cylindrical or Surface Grinding machine previously, relevant knowledge is equally valuable.AI will not be used for the selection process.Job Type: Full-time, permanentHours: Mon - Fri 7:30am - 4:00pm (early finish on Friday possible)Post: Sibert Instruments Ltd., Unit 5 Grove Park, Mill Lane, Alton, Hampshire, GU34 2QGTPBN1_UKTJ

My client, a prominent technology engineering firm, is seeking to recruit a Production Technician to join their team at their headquarters in Hampshire.As a Production Technician, based in Hampshire, you will be working through day-to-day tasks as established by the Production Supervisor of the working area, and in accordance with the production plan, on the wiring and assembly of production jobs.Responsibilities for the Production Technician :Working through day to day tasks in accordance with the production plan, on the wiring and assembly of production jobs.Adhering to Quality standards, following set procedures & work flows at all timesInspecting work in accordance with Inspection guidelinesSoldering, as required. Working towards IPC-620 standard (training will be provided)Conducting procedural tests on production productsThe ideal Production Technician candidate, based in Hampshire will have previous experience within a production/engineering environment, ideally with knowledge of electronics/soldering.You will have strong attention to detail, communication and organisation skills, with an understanding of technical drawings desirable. You will be self-motivated, with the ability to work on your own initiative or as part of a team.This Production Technician job, based in Hampshire is a fantastic opportunity to learn and develop new skills and increase your personal career development as part of a leading technology/engineering company so if you are interested, please apply today by emailing a copy of your up-to-date CV to or phone 01582 87 8810.TPBN1_UKTJ

You will be in a key role, working on cutting-edge Integrity Assessment projects with a high level of complexity for clients such as BP, Shell and EDF Energy. Assessment of power and processing petrochemical plants. Analysis of Engineering assessment and inspection reports.

Quality Technician £28,000 - £32,000 + Extensive Training + Progression + No Weekends Alton, Commutable from: Winchester, Petersfield, Farnham, Reading Do you have a Manufacturing/Quality background looking to work for a rapidly expanding business who offer a highly varied role, on the job training and long-term job security? On offer is an opportunity to join a tight knit team where you can enhance your skillset and maintain a great work-life balance whilst working in a Monday - Friday role. This well-established company, offer niche Technical services including Machining, Finishing and Assembly to Aerospace, Defence, Medical, Electronics and other industries. You will be responsible for ensuring the quality of company products alongside the inspection/release of incoming materials. This role would suit a candidate with a Quality background who is looking to work for a established company in a fast paced, varied working environment. The Role: Identify manufacturing faults Working within niche industries Monday - Friday The Candidate: Mechanical engineering background Quality experience, 1st article inspection Familiar with latest ISO 9001:2015 standard Reference Number:BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sam Claridge at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

MOT Tester – Churt Salary: £35,000 Job Description Pembrook Resourcing are currently seeking an experienced MOT Tester to join our client’s busy and successful dealership based in Churt. This is a great opportunity for a qualified MOT Tester who is looking to work in a professional workshop environment with a strong team and excellent facilities. Key Responsibilities Carrying out MOT tests in line with DVSA regulations. Ensuring all vehicles meet the required safety and environmental standards. Accurately completing MOT documentation and records. Identifying any additional work required and reporting findings to the Service Team. Maintaining a clean and safe working environment within the workshop. Ensuring all work is completed to the highest standards and within agreed timeframes. Requirements Valid MOT Tester licence (Class 4). Previous experience working as an MOT Tester within a dealership or independent garage. Strong knowledge of vehicle inspection standards and MOT procedures. Ability to work efficiently both independently and as part of a team. Full UK driving licence. Benefits Competitive salary package. Supportive working environment. Opportunities for further training and development. Modern workshop with up-to-date equipment. If you are an experienced MOT Tester looking for your next opportunity in Churt, please apply with your latest CV

Building Services Engineer (Electrical bias) Bordon £38,000 - £42,500 The Building Services Engineer (BSE) is responsible for delivering planned and reactive maintenance across Hard and Soft FM systems, ensuring high availability and statutory compliance of FM-controlled assets. The role spans electrical, mechanical and specialist systems including, but not limited to: Building Management Systems (BMS), uninterruptible power supplies (UPS), fire detection and suppression, emergency lighting, closed-circuit television (CCTV), access control, water hygiene and legionella control, and critical HVAC/mechanical plant. The BSE will act as an Authorised Person (AP) under JSP375 and within Systems of Work , exercising permit-to-work control, isolations and handover, and ensuring that all work is completed safely and to specification. The role will use the CAFM system to plan, record, and optimise maintenance activities, and will support infrastructure works delivered via approved subcontractors. The BSE will primarily be based at Bordon and may be required to travel to other sites within the contract as directed. Participation in the on-call rota is required, with a call-out allowance paid in accordance with contract terms. Requirements: Qualified Electrician to BS 7671 (18th Edition). Inspection, Testing & Certification qualification (e.g., City & Guilds 2391/2) - desirable. Authorised Person (AP) appointment under JSP375 (e.g., LV; HV desirable) - training/appointment provided if not currently held. Demonstrable experience maintaining and fault-finding across BMS, UPS/generator systems, fire detection/suppression, emergency lighting, CCTV and access control, HVAC/mechanical plant, and water hygiene/legionella controls. Experience operating within a permit-to-work and Safe Systems of Work environment, with strong understanding of risk assessment and control of work. Competent IT user: CAFM (Agility) and MS Office; ability to update O&M and compliance records. Eligible for Security Check (SC) clearance. Full UK driving licence (car/van). For more information please call David Bates @ ARM on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission

We are recruiting on behalf of our client for the position of Toolmaker / Precision Machinist (Manual) in Liss, Hampshire. This is an excellent opportunity for a skilled Toolmaker or Precision Machinist to join a reputable company specialising in automotive restoration and high-quality component manufacturing. The ideal individual should have a strong background in manual machining, supported by a completed apprenticeship in Toolmaking, General Engineering, or a related discipline. Experience with manual mills, lathes, surface grinders, and bench fitting is essential. The individual must demonstrate excellent attention to detail, problem-solving ability, and organisational skills. The role suits both experienced professionals and recently qualified engineers seeking career development within a specialised environment. Benefits of a Toolmaker / Precision Machinist: Competitive salary ranging from £32,450 to £40,560 per annum, depending on experience Stable, Monday to Friday working hours, 39 hours per week Support for ongoing training and professional development Friendly, supportive team environment focused on quality craftsmanship Opportunities to work on high-spec, niche projects in a modern workshop setting No weekend work, offering a healthy work-life balanceDuties of a Toolmaker / Precision Machinist: Operate manual milling machines, lathes, and surface grinders Produce precision components adhering to engineering drawings and tight tolerances Perform inspection and quality checks on machined parts Support assembly, modification, and quality control procedures Maintain a clean, safe, and organised workspace Support continuous improvement and workshop efficiencyRequirements of a Toolmaker / Precision Machinist: Apprenticeship completion in Toolmaking, General Engineering, or equivalent Proven experience in manual machining and toolroom practices Strong attention to detail and pride in craftsmanship Good problem-solving skills and organisational ability Ability to work independently and within a team environmentThis role offers stability, variety, and an opportunity to develop your skills within a company committed to quality and precision. Whether you are an experienced Toolmaker or a newly qualified engineer, this position provides an engaging environment for niche manufacturing. Contact Liam Buffenbarger, Automotive Recruitment Specialist at Perfect Placement covering Liss and West Sussex, today to discover more about this fantastic opportunity. Perfect Placement are specialists in Automotive Recruitment. So if you are looking for a New Job in the Motor Trade, be sure to contact our team today

What you'll do: Check product and print quality against approved samples, artwork and production standards Hold, recheck or escalate suspect work based on evidence, not pressure Supervise and coach two inspection colleagues, maintaining coverage and record discipline Oversee first-off approvals

Are you an Industrial Electrician with Testing & Inspection experience? Do you hold your 18th Edition and 2391 (or equivalent) qualifications? Are you looking to join a growing business where you'll work on a variety of industrial installations and inspection projects across the North East? Thi

Are you an Industrial Electrician with Testing & Inspection experience? Do you hold your 18th Edition and 2391 (or equivalent) qualifications? Are you looking to join a growing business where you'll work on a variety of industrial installations and inspection projects across the North East?. Ind

This is an excellent opportunity for someone with a strong quality inspection background within a manufacturing or engineering environment who is passionate about precision, quality, and continuous improvement. Carry out first article, in-process and final inspections of manufactured components. Use

WSP is looking for an Engineer/Assistant Engineer to join their experienced Pavement Engineering team in the United Kingdom, working on large-scale projects.The role focuses on delivering pavement design and maintenance projects and involves collaboration with other engineers throughout the project

Responsibilities Speak to professionals and schedule appointments for vehicle inspections Process technical reports and vehicle repairs Complete Quality Control Checks Sort documentation between workshop and fleet customers File manual records and files within company guidelines Create m

Fixed Wire Test Engineer - Stevenage Experience with Electrical Testing and Inspection? Expert at Fixed Wire Testing? Looking for a great career with a market-leading company? Come and be part of our success! Great benefits including uncapped bonus, company vehicle and more! At phs Compliance our bu

Job Description 2391 Electrician (Test & Inspect Engineer) \n Location: HMP Whitemoor, March, PE15 0PR \n Salary: £43,177.Contract: Full time/Permanent \n We are seeking a dedicated Test and Inspect Engineer to join our team at HMP Whitemoor, a High Security & adult/male prison.Join a team that is

One Stop NDT is looking for a General Manager to lead their Inspection Qualification Services business unit in Tees Valley, England.

The role requires five-days-a-week in-person collaboration, with visa sponsorship available for global talent and a path to invent what inspection software should look like in a. Scope Inspection Ltd is seeking a deeply technical professional to own problems end to end, talking to inspectors, redesi

Job Description Metrology Engineer - Dimensional Inspection Want to apply Read all the information about this position below, then hit the apply button.

PassFort in London is seeking a technical specialist to design innovative inspection software.

Evolve our workflow builder, something between Retool, Webflow and n8n for inspections.

PTSG ES specialise in fixed wire test & inspection (EICR's) of commercial and industrial premises. Due to this we're looking to increase Test & Inspection (2391) engineers. What you’ll actually be doing (cutting through the jargon): Running full-scale inspections and tests on commercial and indust

About the job Mercor connects elite creative and technical talent with leading AI research labs.Headquartered in San Francisco, our investors include Benchmark , General Catalyst , Peter Thiel , Adam D'Angelo , Larry Summers , and Jack Dorsey.Position: Construction and Building Inspectors Type: Cont

Lightning Protection Engineer – Testing, Inspection & Maintenance - £3k sign-on bonus Location: London Salary: £32k-40k DOE, a £3k sign-on bonus, company van, equipment, fuel card, pension, and more! About the Role We are looking for an experienced Lightning Protection Engineer to carry out tes

Mobile Testing & Inspection Electrician with electrical & inspection experience, City & Guilds 2391 Inspection & Testing certification, City & Guilds 2382-18, posses NVQ Level 3 Technical Apprenticeship and / or City & Guilds 2377 and a superb opportunity to work across wide range of clients, both p

Electrical Test & Inspection Engineer (EICR) We'll give you £3,000 just to show up. PTSG ES specialise in fixed wire test & inspection (EICR's) of commercial and industrial premises. Due to this we're looking to increase Test & Inspection (2391) engineers.

An electrician role involving testing, inspection, and certification, with opportunities for training and career development.

Why you might actually want this job: A salary of £36,000 to £40,000 DOE , plus benefits and a company vehicle (your mobile HQ) You get to say “I keep thousands safe” at parties, which is cooler than it sounds You’ll work on social housing and public sector projects that actually matter You�

Experienced Electrical Test & Inspection Engineer skilled in Fixed Wire Testing needed for a market-leading company with uncapped bonus potential.

Electrician (Test & Inspect Engineer).Location: HMP Whitemoor, March, PE15 0PR.We are seeking a dedicated Test and Inspect Engineer to join our team at HMP Whitemoor, a High Security & adult/male prison.Join a team that is more than just a group of colleagues - we work Monday-Sunday as a suppor.

Experienced Electrical Test and Inspection Engineer needed for a market-leading company in Bournemouth.

We are looking for a qualified Electrical Inspection & Testing Engineer / Electrician for a long-term commercial contract at Lakeside S.

Do you want to play a key role in delivering world-class quality and precision within the automotive industry?.Weekend overtime available during peak periods starting from 25%+.Excellent training and development opportunities.Travel and mileage paid when required to work at the St Athan site.

Seeking a Test & Inspect Engineer with 5+ years as an electrician and 2+ years in testing/inspection for a permanent, full-time role.

Lead quality inspection activities and a team of inspectors for a luxury automotive manufacturer.

Conduct insurance inspections of lifts and pressure systems, providing reports and audits.

ACTUAL CLOSING DATE: Applications must be received by Tuesday 18 August 2026 at 11:55pm.Please ensure that you read the full advert text and do not submit a CV, as these will be disregarded as they do not form part of SLC application process.If you require to submit additional information to suppor

This is a casual, part-time role offering flexible working.As a Bank Housekeeping Assistant at a Barchester care home, you'll help to create a warm and homely environment that enables us to meet each resident's unique needs.Keeping the home clean and safe is no small task, which is why the role of a

We’re looking for motivated, reliable individuals to join our tissue paper production department.If you enjoy hands‑on work, want to learn new skills, and are looking to build a long-term career in manufacturing, we’d love to hear from you.Operate and monitor tissue paper production machinery.

As a Care Assistant at a Barchester care home, you'll help residents enjoy each day by making sure they get the quality care and support they deserve.You'll assist with daily living, providing support and companionship and sharing great moments and memories too.It's a chance to bring your dedicatio

Join our award-winning school cleaning team.We’re proud of our award-winning service, recognised with:.ASSIST-FM Contribution to Cleaning Award - 2022.APSE Building Cleaning Innovation Award - 2023.Building Cleaning Most Improved Performance Networks Award – 2024.ASSIST – FM Contribution to Cl

This is a casual, part-time role offering flexible working.As a Bank Senior Care Assistant at a Barchester care home, you'll look after the different needs of our residents to enable us to deliver quality, person-centred care and support.Your role will involve supervising and inspiring a team of ded

Please note that salary will be pro-rated for part-time and term-time hours.We have various cleaning positions across the Kirkintilloch, Lenzie and Twechar area within East Dunbartonshire.These posts are within our education and corporate premises.There are a variety of hours including morning shift

Join Our Facilities Team – School Cleaner.Are you someone who takes pride in creating safe, welcoming spaces for others? Do you want to be part of a supportive, professional team that helps schools thrive? If so, we’d love to hear from you.We’re looking for a motivated and reliable Cleaner to

Cleaner required for Cruden Bay public toilets, 5 hours per week, M/W/T/F/S.Responsible for cleaning premises to required standard.This role may require flexible, evening and weekend working.There is a responsibility for the post holder to demonstrate a commitment to quality service delivery through