Trabajos inspection en MiddlesbroughCrear alertas

Storage Tank Inspectors / NDT Technicians Background TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broa... ZIPC1_UKTJ

TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, ... ZIPC1_UKTJ

Background TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international ch... ZIPC1_UKTJ

LV Testing Electrician Location: Teesworks Type: Permanent Salary: Competitive We’re seeking an experienced LV Testing Electrician to join our client’s team in a hands-on role. Key duties include: • LV inspection, testing, maintenance, and fault finding, • Managing and scheduling your own workload, • Carrying out Inspection & Testing (2391 or equivalent required), • Reviewing and improving existing maintenance schedules, developing a modern ITM programme

TEXO Recruitment are currently looking for an MEP Technician on behalf of one of our external clients based in Middlesbrough. The technician will support operations across northern sites, carrying out a wide range of electrical maintenance, fault finding, repair and general facilities maintenance activities across port buildings. Key Responsibilities • Carry out electrical repairs, installations, and planned preventative maintenance across port facilities, ensuring full compliance with current regulations and industry standards., • Undertake statutory electrical testing and inspection duties, including PAT testing and assisting with fixed wire testing where appropriately qualified., • Provide support with basic plumbing and general building services tasks, including repairs to leaks, taps, toilets, pipework, and drainage systems as required., • Inspect, test, and maintain MEP systems, with a primary focus on electrical infrastructure, ensuring safe, reliable, and efficient operation., • Read, interpret, and work from technical drawings, schematics, manuals, and written instructions., • Support facility improvement works, refurbishments, and renovation projects as required. Requirements • Time-served apprenticeship or equivalent qualification in Electrical or Plumbing disciplines, • 18th Edition Wiring Regulations (BS 7671) certification, • Basic plumbing or general building services knowledge, • Full UK driving licence If this role seems of interest, please contact Brooke Nesbit at TEXO Recruitment on 01670 331846 or send your CV to brooke.nesbit@texorecruitment.co.uk

Workshop Engineer Stockton-on-Tees (Commutable from: Middlesborough, Darlington, Hartlepool, Whitby, Newton Aycliffe, Sunderland, Durham, Thirsk)£30,000 - £35,000 + Monday - Friday days + Training + Progression + Overtime + Benefits Do you have Mechanical qualifications and/or experience looking to join a National leader in the industry in a workshop position coupled with full Electrical, Mechanical and Hydraulic training?On offer is a fantastic opportunity to join this company in a stable permanent role. You will be required to work on modern equipment, maintain a good work life balance and have clear progression within their business.The company are a multi-million manufacturer of specialist Plant and Material Handling equipment supplying to leading facilities. This role is available due to internal growth plans.This is a highly varied Monday - Friday days based role out of their modern, fully equipped and local depot. You will be based on site providing Service, Maintenance, Inspection and Testing on a range of Forklift machinery. This role would suit a Forklift, Mechanical or similar Engineer looking to progress technically, receive multi-skilled training and job a secure business. The role. • Maintenance, Inspection and Testing on Access, Material Handling, Forklift equipment., • Electrical, Mechanical and Hydraulics involved., • Monday - Friday (flexible hours). The person. • Plant, Forklift, REME, Material Handling, Vehicle background., • Any Mechanical background welcomed, • Commutable to Stockton. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Position: CNC Turner - Setter / OperatorLocation: Stockton-on-TeesSalary: £35 - 40k DOECNC Turner Setter / Operator required for a well-established engineering and manufacturing company based in Stockton-on-Tees. Our client operates across a range of industries including telecommunications, construction, and rail, providing specialist equipment and innovative engineering solutions.Due to continued growth, they are seeking an experienced CNC Turner Setter / Operator to join their production team. CNC Turner Setter / Operator Position Overview • Setting and operating CNC turning machines to manufacture precision-engineered components, • Interpreting engineering drawings, technical specifications, and production documentation, • Adjusting machine settings and tooling to achieve optimum machining performance, • Using measuring equipment to ensure components meet required tolerances and specifications, • Carrying out routine machine maintenance and troubleshooting activities, • Working closely with colleagues to improve manufacturing processes and efficiency, • Accurately recording production data and manufacturing activities, • Ensuring compliance with company health and safety procedures at all timesCNC Turner Setter / Operator Position Requirements, • Proven experience as a CNC Turner Setter / Operator within a precision engineering environment, • Strong mechanical aptitude and understanding of machining processes, • Ability to read and interpret engineering drawings, • Experience using precision measuring equipment and inspection tools, • Experience with grinding, milling, and tooling operations would be advantageous, • Familiarity with CAD software, particularly SolidWorks, would be beneficial, • Previous supervisory experience would be advantageousCNC Turner Setter / Operator Position Remuneration, • £35 - 40k base salary DOE, • Performance-related bonus structure, • Monday to Thursday: 8:00am - 4:30pm, • Friday: 8:00am - 3:30pm, • 25 days annual leave plus bank holidays, • Company pension scheme, • Private dental insurance, • Health and wellbeing programme, • Free on-site parking Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Curriculum Team Leader – Computing Location: Teesside Salary: £39,364 – £43,562 per annum Hours: 37 hours per week Teaching hours: 864 hours per annum based on full time Up to 7 hours abatement for the role of Curriculum Leader depending on allocated duties. Benefits: 45 days plus bank holidays / Teacher pension plus many more Main Purpose: The Curriculum Team Leader will be responsible for the academic leadership of curriculum teams and operational management of the curriculum area including assisting in the development of timetables, the monitoring of quality and performance management where necessary. Duties: • Provide an example of academic excellence within the course team., • Undertake all operational management of the curriculum area., • Undertake all aspects of line management of the team including performance appraisals of staff, monitoring and development., • Guide staff in the discharge of their curriculum duties across a range of innovative delivery models., • Lead on the development of interesting and effective Schemes of Work., • Promote use of ILT in curriculum delivery., • Promote innovative teaching and learning approaches, and implement the Learning, Teaching & Assessment Strategy., • Carry out lesson observations and ‘walk throughs’ including feeding back to staff., • Ensure students are registered with the Awarding Body., • Complete all PVC requests., • Meet all Awarding Body validation, delivery and assessment requirements., • Maintain up-to-date knowledge of Awarding Body developments., • Comply with all College quality assurance policies and procedures., • Allocate and monitor staff timetables working closely with the Assistant Principal/ Associate Directors., • Ensure optimum deployment of staff giving effective and efficient utilisation within the terms of contracts., • Ensure that there is effective cover for any absent staff., • Work closely with Assistant Principal / Associate Directors to ensure the internal and external validation of all proposed curriculum products and delivery models prior to course commencement. (16-19, Study Programmes, 19+, and commercial offer)., • Work closely with the Assistant Principal / Associate Director to provide curriculum quality assurance in the design process., • Implement College quality systems and processes., • Embed a process of continuous improvement within curriculum provision., • Provide and act upon data relating to student and course performance., • Provide information in response to college routine management requests., • Have in-depth knowledge of the overall quality of full study programmes and Apprenticeship Frameworks in the curriculum area., • Use reporting/monitoring systems such as Proachieve and Promonitor to provide accurate and up to date information., • Ensure the tracking and monitoring of student’s/apprentice's progress and achievement is standardised, accurate and transparent to all., • Provide all information in a timely manner., • Commit to and implement the College’s Student Disciplinary Policy and Procedures., • Promote and support appropriate standards of student behaviour., • Agree relevant targets with the Assistant Principal / Associate Director on a regular basis in line with curriculum planning cycles and alert the Assistant Principal / Associate Directors of shortfalls., • Manage staff and courses efficiently and effectively to deliver the agreed targets., • Work with the Assistant Principal / Associate Director to lead the team in their preparation of documentation for internal and external inspection., • Ensure that staff are fully prepared for internal and external inspection. Responsibilities: • To hold a relevant qualification at Degree level., • To be a qualified Teacher or must be prepared to commence an appropriate teaching qualification on appointment to the post., • Personal commitment to keeping your professional knowledge up to date and improving your capabilities., • Grade C or above in Maths and English (or equivalent) or willing to work towards it., • Personal commitment to keeping your professional knowledge up to date and improving your capabilities – Desirable., • To be willing to work towards Middlesbrough College’s Advanced Practitioner Programme, • Relevant current experience and knowledge of Digital curriculum, • Relevant experience in a teaching position in Further Education or Secondary Education or within a professional environment – Desirable. For more information please contact Imperial Recruitment Group

TEXO Recruitment are currently looking for an MEP Technician on behalf of one of our external clients based in Middlesbrough. The technician will support operations across northern sites, carrying out a wide range of electrical maintenance, fault finding, repair and general facilities maintenance activities across port buildings. Key Responsibilities • Carry out electrical repairs, installations, and planned preventative maintenance across port facilities, ensuring full compliance with current regulations and industry standards., • Undertake statutory electrical testing and inspection duties, including PAT testing and assisting with fixed wire testing where appropriately qualified., • Provide support with basic plumbing and general building services tasks, including repairs to leaks, taps, toilets, pipework, and drainage systems as required., • Inspect, test, and maintain MEP systems, with a primary focus on electrical infrastructure, ensuring safe, reliable, and efficient operation., • Read, interpret, and work from technical drawings, schematics, manuals, and written instructions., • Support facility improvement works, refurbishments, and renovation projects as required. Requirements • Time-served apprenticeship or equivalent qualification in Electrical or Plumbing disciplines, • 18th Edition Wiring Regulations (BS 7671) certification, • Basic plumbing or general building services knowledge, • Full UK driving licence If this role seems of interest, please contact Brooke Nesbit at TEXO Recruitment on 01670 331846 or send your CV to brooke.nesbit@texorecruitment.co.uk

CDM Recruitment are proud to be working with a well-established Oil & Gas equipment manufacturer based in the North East of England. With over 40 years of experience delivering critical subsea components and systems, our client is recognised for producing highly specialised, high-integrity products for global customers. This is an excellent opportunity to join a thriving engineering business employing over 300 people across the region. With a strong order book and long-term projects secured, it’s a fantastic time to get involved. The Role We are currently recruiting a number of experienced Welders with the following skill set: MMA (essential) TIG route experience highly desirable Following a successful interview, candidates will be required to complete a weld test unless already. Weld qualifications will be subject to Radiographic Testing (RT) and additional inspection activities. What We’re Looking For To be considered, you must: Be time served with NVQ Level 3 in Welding & Fabrication (or equivalent) Have proven experience working from detailed engineering drawings, SOPs and weld procedures Be confident working with a wide range of materials including: Iconel Carbon Demonstrate a strong commitment to quality standards, including: * 100% Radiographic Testing (RT) ...

Plant Fitter (Switchgear/Transformers/HV) Middlesborough £35,000 to £45,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Plant Fitter with a background in Switchgear or Transformers or similar looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end to end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as hands on training, structured professional development plans and more company benefits? On Offer is opportunity for a Plant Fitter to join a company that heavily invests in their employees, putting you through lots of internal and external training with career pathways in Senior SAP Engineer or Project Management positions. In this role, the successful Plant Fitter will be responsible for installation, construction, maintenance and repair of High Voltage switchgear and automation equipment. This involves inspection and maintenance of Distribution Network Operators, private switchgear sites, transformers ...

Plant Fitter (Switchgear/Transformers/HV) Middlesborough £35,000 to £45,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Plant Fitter with a background in Switchgear or Transformers or similar looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end to end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as hands on training, structured professional development plans and more company benefits? On Offer is opportunity for a Plant Fitter to join a company that heavily invests in their employees, putting you through lots of internal and external training with career pathways in Senior SAP Engineer or Project Management positions. In this role, the successful Plant Fitter will be responsible for installation, construction, maintenance and repair of High Voltage switchgear and automation equipment. This involves inspection and maintenance of Distribution Network Operators, private switchgear sites, transformers and actuators. This Role would suit a Plant Fitter with a backgr...

SEND Case Officer (Middlesbrough) Middlesbrough Council is seeking an experienced SEND Case Officer to join its highly regarded SEND Assessment and Review Team. Following a positive Local Area SEND Inspection outcome, the service continues to be committed to delivering high-quality support and positive outcomes for children and young people with Special Educational Needs and Disabilities (SEND). This is an excellent opportunity for an experienced SEND professional to manage a varied caseload, coordinate statutory SEND processes, and work collaboratively with families, schools, and partner agencies to ensure children and young people receive the support they need. The successful candidate will be responsible for managing children and young people undergoing Education, Health and Care (EHC) needs assessments, maintaining existing EHCPs, and coordinating annual reviews in line with statutory requirements. Main Duties: Manage a caseload of children and young people with Special Educational Needs and Disabilities (SEND) Coordinate Education, Health and Care (EHC) needs assessments from referral through to completion Draft, amend, and maintain high-quality, legally compliant Education, Health and Care Plans (EHCPs) Coordinate annual reviews and ensure all statutory processes are completed within required timescales Monitor the progress and status of children and young people within an allocated caseload Work collaboratively with parents, c...

Mechanical Technician | Day Shift | Monday - Friday Up to just under £45k plus overtime Jackson Hogg are delighted to be supporting their longstanding client with the appointment of a Mechanical Maintenance Technician to join them on a permanent basis. You will be working as part of a problem-solving engineering team who are repsonsible for the preventative maintenance, inspection, fault-finding and repair of cranes & mobile plant assets. You will be required to respond to breakdowns and failures using problem solving techniques to return equipment back into service with minimum delay. The ideal candidate will have experience in the maintenance of mobile plant and equipment such as Reach stackers, loading shovels, forklifts and shunting units; used in a busy dock operation. Additionally, knowledge of Hydraulics and Pneumatics, Electrical Systems would be an advantage. Skills Required 5+ years of experience working within heavy industry in a similar role HNC qualified or time served Previous experience within a maintenance position is essential Other company benefits include 25 days holiday plus bank holidays pension up to 7% ER generous sick pay scheme cycle to work scheme ongoing training and development...

Workshop Engineer Stockton-on-Tees (Commutable from: Middlesborough, Darlington, Hartlepool, Whitby, Newton Aycliffe, Sunderland, Durham, Thirsk) £30,000 - £35,000 + Monday - Friday days + Training + Progression + Overtime + Benefits Do you have Mechanical qualifications and/or experience looking to join a National leader in the industry in a workshop position coupled with full Electrical, Mechanical and Hydraulic training? On offer is a fantastic opportunity to join this company in a stable permanent role. You will be required to work on modern equipment, maintain a good work life balance and have clear progression within their business. The company are a multi-million manufacturer of specialist Plant and Material Handling equipment supplying to leading facilities. This role is available due to internal growth plans. This is a highly varied Monday - Friday days based role out of their modern, fully equipped and local depot. You will be based on site providing Service, Maintenance, Inspection and Testing on a range of Forklift machinery. This role would suit a Forklift, Mechanical or similar Engineer looking to progress technically, receive multi-skilled training and job a secure business. The role. Maintenance, Inspection and Testing on Access, Material Handling, Forklift equipment. Electrical, Mechanical and Hydraulics involved. Monday - Friday (flexible hours). The person. Plant, Forklift, REME, Mat...

Storage Tank Inspectors / NDT Technicians Background TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. As part of the TV family, TV Rheinland Industrial Services (TRIS) are looking to recruit Storage Tank Inspector(s) for the UK, and possible overseas deployment. We are seeking experienced Inspectors/NDT Technicians to join our growing Industrial team to provide inspection and assessment of above ground flat bottomed storage tanks. You can be based in theNorth West, North East, Southern Area dependent on your home location. We offer continued comprehensive training, flexible working, and a great pay and benefits package. Job Description • Examination of storage tanks as per inspection plan / schemes, • Undertake and/or oversee necessary Non-Destructive Testing (NDT) for inspections, • Coordination of third-party NDT providers for extensive requirements or specialist techniques., • Assessment and g...

TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. We offer comprehensive training, flexible working, and a great pay and benefits package. As part of the TUV family Risktec Resourcing have been tasked to assist our sister company TUV Rheinland Industrial Services (TRIS) in recruiting for a Mechanical Engineer for our Teesside office. We are looking for a Mechanical Engineer with a strong design focus to support petrochemical and process industry projects. This is a mid-level role, suited to an engineer who has moved beyond graduate level and is developing toward senior engineer and chartership. You will work on real engineering problems under the guidance of senior engineers, with increasing responsibility as your capability grows. Role Overview We are looking for a Mechanical Engineer with a strong design focus to support petrochemical and process industry projects. This is a mid-level role, suited to an engineer who has moved beyond graduate level and is developing...

Key Responsibilities - Racking Remedial and Inspection Manager Conduct SEMA standard racking inspections (including mezzanine floors) and produce detailed, high-quality reports Carry out and oversee remedial repair works on racking systems Issue and manage load notices in line with current regulat

We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

Job Title: Electrical Technician Location: Middlesbrough Depot Company: Pump Supplies Limited About Us Pump Supplies Limited is a trusted leader in submersible pump solutions, specialising in the hire, installation, and maintenance of leading brands such as Flygt, Tsurumi, and Grundfos. Serving a wide range of industries, we are committed to delivering high-quality service and innovative solutions. As part of our continued growth, we are seeking a skilled Electrical Technician to join our Middlesbrough Depot team. Job Description Position Overview: We are looking for an experienced and motivated Electrical Technician to support the repair, servicing, and maintenance of pumps and electrical panels. This role involves both depot-based and on-site work, including the installation and connection of electrical panels and pumps. The ideal candidate will have a strong background in electrical systems and a hands-on approach to problem-solving. Key Responsibilities • Electrical Panel Maintenance: Repair, service, maintain, and test electrical control panels used with pumping systems., • Installation Work: Install and connect electrical panels and pumps within the depot and at customer sites, ensuring compliance with safety and operational standards., • Troubleshooting: Identify and resolve faults in pumps and electrical panels efficiently, minimising downtime., • Testing and Calibration: Conduct electrical tests and calibrate systems to ensure they meet performance and current safety electrical requirements., • Commissioning: Have the ability to commission an electrical system to meet client requirements., • Documentation: Maintain detailed records of repairs, servicing, and electrical installations, updating logs and documentation as required., • Customer Interaction: Liaise with clients on-site to ensure installations and repairs meet their needs and expectations., • Health & Safety Compliance: Adhere to all Health & Safety regulations and company policies to ensure a safe working environment. Qualifications • Proven experience as an Electrical Technician, preferably in the pump or industrial sectors., • Strong knowledge of electrical systems, including wiring, control panels, and fault diagnosis., • The capability to understand relay logic and analyse the clients’ control systems., • Hands-on experience with submersible pumps, particularly brands like Flygt, Tsurumi, and Grundfos., • Ability to read and interpret technical diagrams and schematics., • Excellent troubleshooting and problem-solving skills., • Proficiency in using electrical testing equipment and tools., • Strong attention to detail and commitment to high-quality workmanship., • 18th Edition wiring regulations. Preferred Qualifications • Relevant technical or vocational qualifications in electrical installations or a related field., • Experience working in the pump industry or a similar technical environment., • Familiarity with Health & Safety standards in industrial or construction settings., • Knowledge of AMP8 requirements and water industry standards., • Experience in working with variable speed drives., • 2391 Inspection and testing or equivalent qualification. What We Offer • Competitive salary and benefits package., • Opportunities for professional development and skill enhancement., • A dynamic and supportive work environment., • The chance to work with industry-leading equipment and technologies., • Opportunities to take part in challenging and rewarding projects both in the depot and on-site. How to Apply Are you a skilled Electrical Technician ready to take on a varied and exciting role? Join Pump Supplies Limited and become part of a team dedicated to delivering excellence in the pump industry

Position: CNC Turner - Setter / Operator Location: Stockton-on-Tees Salary: £35 - 40k DOE CNC Turner Setter / Operator required for a well-established engineering and manufacturing company based in Stockton-on-Tees. Our client operates across a range of industries including telecommunications, construction, and rail, providing specialist equipment and innovative engineering solutions. Due to continued growth, they are seeking an experienced CNC Turner Setter / Operator to join their production team. CNC Turner Setter / Operator Position Overview Setting and operating CNC turning machines to manufacture precision-engineered components Interpreting engineering drawings, technical specifications, and production documentation Adjusting machine settings and tooling to achieve optimum machining performance Using measuring equipment to ensure components meet required tolerances and specifications Carrying out routine machine maintenance and troubleshooting activities Working closely with colleagues to improve manufacturing processes and efficiency Accurately recording production data and manufacturing activities Ensuring compliance with company health and safety procedures at all times CNC Turner Setter / Operator Position Requirements Proven experience as a CNC Turner Setter / Operator within a precision engineering environment Strong mechanical aptitude and understanding of machining processes Ability to read and interpret engineering drawings Experience using precision measuring equipment and inspection tools Experience with grinding, milling, and tooling operations would be advantageous Familiarity with CAD software, particularly SolidWorks, would be beneficial Previous supervisory experience would be advantageous CNC Turner Setter / Operator Position Remuneration £35 - 40k base salary DOE Performance-related bonus structure Monday to Thursday: 8:00am - 4:30pm Friday: 8:00am - 3:30pm 25 days annual leave plus bank holidays Company pension scheme Private dental insurance Health and wellbeing programme Free on-site parking Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Fire Extinguisher Engineer - North East If you are a competent and experienced Fire Extinguisher Engineer, phs Compliance are looking for people like you to join our growing business and ensure we keep providing our clients with a market leading service. In return for your commitment and expertise, you will get Base Salary of £26,538 Overtime available for additional earning Ongoing career development opportunities A company vehicle Pension Additional earning potential through referrals phs Perks (Partnership with Reward Gateway) phs Shop ( Discount on household consumables) A 24-hour wellbeing helpline Training to expand your skills. We offer accredited ILM training through external and in-house training Apprenticeship opportunities Other benefits such as improved parental and paternity leave, a 24-hour wellbeing helpline, cycle to work scheme, pension scheme, life assurance and more 23 days holiday plus bank holidays (31 days in total) The Fire Extinguisher Engineer role at phs Compliance will involve. Visiting multiple commercial properties, for example banks, schools, universities, retail outlets, leisure centres, hospitals and pubs to complete servicing and maintenance of fire extinguishers and ensure compliance for our customers The ideal candidate for a Fire Extinguisher Engineer at phs will have: Full UK manual Driving License for a minimum of 12 months (Subject to insurance requirements), with a maximum of 6 points. 2 Years previous industry experience would be advantageous. An understanding of Health and Safety Regulations within the workplace. A good level of IT literacy Knowledge of Test and Inspection Procedures and software Desirable but not essential BAFE ,FETA, IFEDA About phs: Phs Group was founded in 1963 and we are the leading provider for Hygiene Services in the UK, Spain and Ireland with over 90,000 customers across 300,000 locations incorporating numerous businesses during its 63 years of business. Our businesses include: Washrooms, Healthcare, Floorcare, Phs Direct and Direct 365 (sale of consumables), Phs Greenleaf, Teacrate, Besafe, Wastekit and Compliance. Phs compliance focuses on helping more than 2,000 UK business customers test, install and manage their property infrastructure assets. PHS Compliance self-delivers electrical test and inspection, M&E installation & maintenance & asset verification with over 400 engineers based nationwide. Our technical and quality management standards are second to none, we are one of a few UK Companies accredited to UKAS 17020 inspection body standards for fixed wire and portable appliance testing. At phs, we pride ourselves on our diverse workforce, and ensuring we have an inclusive environment for all our staff. We remain committed to ensuring our teams can bring their true selves to work without risk or fear of discrimination. TPBN1_UKTJ

Storage Tank Inspectors / NDT Technicians Background TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. As part of the TÜV family, TÜV Rheinland Industrial Services (TRIS) are looking to recruit Storage Tank Inspector(s) for the UK, and possible overseas deployment. We are seeking experienced Inspectors/NDT Technicians to join our growing Industrial team to provide inspection and assessment of above ground flat bottomed storage tanks. You can be based in the North West, North East, Southern Area dependent on your home location. We offer continued comprehensive training, flexible working, and a great pay and benefits package. Job Description Examination of storage tanks as per inspection plan / schemes Undertake and/or oversee necessary Non-Destructive Testing (NDT) for inspections Coordination of third-party NDT providers for extensive requirements or specialist techniques. Assessment and grading of defects found from inspection and helping to determine remedial actions / recommendations Assistance in the specification and coordination of repairs. Preparation and issue of inspection reports and certificates including all necessary supporting documents e.g. photographs, NDT reports, assessment calculations etc. Liaison with client contacts re. inspection planning and execution Working strictly to recognised safe systems of work e.g. PTW, RAMS, CSE etc Requirements Engineering technical qualification e.g. ONC, HNC, NVQ level 4, BTech, Degree. Desired - Certified EEMUA 159 Tank Assessor or Inspector. (API 653 may be considered). Option to be trained up to EEMUA 159 Certification NDT certified for UT and surface flaw detection (PT, MT) preferred e.g. PCN Mechanical Engineering background. Understanding of engineering principals. Excellent written and verbal communication. Eye for detail. Ability to accurately follow procedures. Courage to make (and defend) difficult decisions. Good interpersonal skills, and the capability to work independently. Ambition to learn and progress. Willingness to travel and work on client sites in UK and potentially overseas Understanding of fabrication processes and NDT is desirable. Experience of chemical and/or oil & gas industry is desirable. What can we offer? Standard hours Monday to Friday 40 hours per week. Overtime available. Bonus Scheme based on Company Profits and Personal Targets. Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday. Permanent full-time position, office, client site, and home based – hybrid working. Employee Discount scheme. Accredited training to internationally recognised engineering appointment. Career progression opportunities with structured development. Opportunities to work in many sectors of UK industry

Electrical Installation Engineer / Electrical Installation Technician / Electrical Maintenance Engineer to join a leading pump service provider. The Electrical Installation Engineer / Electrical Installation Technician / Electrical Maintenance Engineer will be responsible for the electrcal installation, servicing, and repair of industrial pumps primarily within the wastewater industry, including submersible pumps, booster systems and pumps, drainage pumps, control panels, and associated control systems. The Electrical Installation Engineer / Electrical Installation Technician / Electrical Maintenance Engineer will ideally have experience with Electrical installation and maintenance of pumps and related components such as booster sets, three-phase electrics, variable speed drives, control panels and wiring, level / flow sensors, level control systems, electric motors of compressors or rotating machinery, or any related electrical installation work. Package £40,000 - £45,000 depending on experience. Company vehicle Overtime Attendance Bonus Pension scheme. Additional benefits. Electrical Installation Engineer / Electrical Installation Technician / Electrical Maintenance Engineer Role To be responsible for the electrcal installation, servicing, and repair of industrial pumps primarily within the wastewater industry, including submersible pumps, booster systems and pumps, drainage pumps, control panels, and associated control systems. Install electrical panels and pumps both at the depot and on customer sites, including wiring, connecting, testing, and calibrating systems. Collaborate on mechanical aspects of installations such as pipework assembly, kit loading/unloading, and on-site support. Diagnose and resolve faults efficiently to minimise downtime, including working with three-phase motors and variable speed drives. Maintain accurate logs of work completed, installations, repairs, and servicing. Liaise with clients to ensure installations and repairs meet operational and safety expectations Electrical Installation Engineer / Electrical Installation Technician / Electrical Maintenance Engineer Requirements Will ideally have experience with Electrical installation and maintenance of pumps and related components such as booster sets, three-phase electrics, variable speed drives, control panels and wiring, level / flow sensors, level control systems, electric motors of compressors or rotating machinery, or any related electrical installation work. Proven experience as an Electrical Technician, Service Engineer, Pump Engineer, Electrical Pump Engineer, Maintenance Electrician, Water Treatment Engineer, Field Service Engineer, or Installation Electrician Hold a valid JIB Gold card, or ECS Gold Card, or an alternative is essential Hands-on experience with submersible pumps, especially Flygt, Tsurumi, and Grundfos, is beneficial Experience with Three-phase electrics is an advantage. Ability to read and interpret technical diagrams and schematics. 2391 Inspection and Testing qualification or equivalent is a benefit, but not essential Knowledge of 18th Edition wiring regulations and Health & Safety standards is advantageous Full UK driving licence TPBN1_UKTJ

Title: Manufacturing Engineer Type: Permanent Location: Middlesbrough Salary: Up to £50k DOE Our client is a recognised leader in multi-sector precision machining, supporting complex engineering programmes across aerospace, defence, energy, space and advanced manufacturing. With continued investment in technology, capability and people, they are looking to strengthen their manufacturing engineering team with an experienced Manufacturing Engineer / CAD CAM Programmer who can play a key role in process optimisation, technical ownership and continuous improvement across high-precision components. This is an opportunity to join a highly collaborative engineering environment where quality, innovation and customer delivery are central to the business. Key Responsibilities Responsibilities for the Manufacturing Engineer will include, but are not limited to: • Developing detailed and efficient manufacturing process routes for precision machined components, • Creating CAD/CAM programmes using Hypermill, Fusion 360 or other recognised software packages across 2, 3 and 5-axis CNC machinery, • Ensuring planned cycle times align with quoted cost estimates, identifying and escalating any variances where required, • Driving tooling optimisation and standardisation to ensure all tooling requirements are defined and available ahead of production, • Designing effective fixtures and work-holding solutions to support efficient and repeatable manufacturing, • Producing stage and manufacturing drawings where required, • Taking ownership of the complete technical package, including product validation, engineering change control and operational support throughout the manufacturing lifecycle, • Supporting components through first article inspection and collaborating with technicians and production teams on ongoing optimisation and continuous improvement activities, • Investigating and resolving technical manufacturing issues as they arise, • Maintaining high quality standards and ensuring all documentation and records are managed in line with quality system requirements About You The ideal Manufacturing Engineer will have: • Strong proficiency with CAD modelling and CAM programming software, • Experience working within precision machining or advanced manufacturing environments, • Excellent communication skills with the ability to collaborate effectively across internal teams and external stakeholders, • Strong organisational skills with the ability to manage multiple priorities effectively, • A proactive mindset with a strong focus on continuous improvement, • A customer-centric approach with a genuine focus on quality, delivery and engineering excellence This position would suit a Manufacturing Engineer who enjoys technical ownership, problem solving and working within a fast-paced, high-precision manufacturing environment

Site Engineer - Civils / Highways Location: North East Salary: Up to £50,000 dependent on experience Additional: Car allowance / Company vehicle Package: Healthcare plan, pension scheme and holiday allowance (26 days + BH) Linsco are delighted to be supporting our client, a well-established and forward-thinking civil engineering contractor with an excellent reputation for delivering civils and infrastructure projects. Due to continued success and a strong pipeline of secured work across multiple frameworks, they are looking for motivated and experienced Site Engineers to join their growing team in the North East region. This is a long-term opportunity to join a privately owned, people-focused business delivering a wide range of civil engineering and local highways projects. The Role As a Site Engineer, you will play a key role in the successful delivery of civils and highways schemes, supporting site teams with setting out, quality assurance, technical compliance, and day-to-day engineering duties. Typical projects include (but are not limited to): Local highways improvements Junction upgrades Cycleway schemes Public realm works Utilities works You will work closely with Site Agents, Project Managers and subcontractors to ensure projects are delivered safely, accurately, on time and to the highest quality standards. Key Responsibilities Carry out setting out and surveying duties on site Ensure works are completed in line with drawings, specifications and quality standards Produce and maintain accurate site records and as-built information Support the management of subcontractors and site operations Assist with planning, progress reporting and technical problem solving Ensure compliance with health and safety procedures and company standards Liaise with clients, design teams and stakeholders where required Support quality assurance and inspection processes throughout delivery Requirements Previous experience as a Site Engineer within civils / infrastructure projects Strong background in highways, groundworks or local authority schemes Competent with setting out equipment and interpreting technical drawings Degree/HNC/HND in Civil Engineering or related discipline preferred CSCS Card SMSTS or SSSTS desirable First Aid at Work desirable Full UK driving licence What's on offer Salary up to £50k depending on experience Company car or car allowance 26 days holiday + bank holidays Pension contribution Long-term, stable work secured through major frameworks Ongoing training and development opportunities A supportive, people-focused culture within a privately owned business Award-winning processes designed to help you succeed and progress Applications If you feel that you have the relevant experience to be successful in this position and would like to find out more, please apply online today, attaching a copy of your current CV. Due to the vast number of applications that we receive, it is not possible for us to contact all applicants; therefore, only suitable candidates will be contacted. If you do not hear anything back within 7 days of submitting your application, you have unfortunately not been selected. Linsco is an equal opportunities employer. All applicants will be considered on their merits regardless of background, characteristics or personal circumstances. All applications will be dealt with in the strictest confidence. TPBN1_UKTJ

Structural / Civil Engineer Lead civil and structural asset integrity at a major manufacturing site Wolviston Management Services is proud to be working in partnership with Tioxide to recruit a Structural / Civil Engineer for their Greatham site. This is a key engineering role where you will help ensure civil and structural assets are designed, installed, commissioned, maintained, inspected and operated in line with UK legislation, Greatham engineering standards and recognised best practice. You will lead civil and structural asset life planning, manage inspection and repair activity, support capital projects and act as the technical interface with specialist suppliers, inspection companies and competent authorities. What you’ll be doing You will: Develop and deliver the site asset life strategy for civil and structural assets. Ensure civil and structural risks are identified, managed and controlled. Support regulatory compliance and asset availability for production. Assist the Responsible Mechanical Engineer with technical responses to the HSE and Environment Agency. Act as the technical interface for civil and structural matters with specialist suppliers and inspection companies. Ensure assets are maintained, inspected, repaired and operated in line with legislation, standards and best practice. Select competent civil and structural companies to work on site. Organise inspections, interpret inspection reports, prioritise repairs and produce repair tender documents. Manage contractors on site to ensure work is completed safely and to a high standard. Maintain inspection records and documentation for critical infrastructure. Manage the site infrastructure revenue and CAPEX budget. Provide civil and structural engineering support to capital projects. Own relevant engineering procedures covering structures, pipebridges, ground and groundwater protection, excavations and asbestos. Promote a positive, values-led culture focused on safety, compliance and engineering best practice. Candidate requirements We welcome applications from people who have: A degree, or equivalent knowledge, in civil or structural engineering. Membership of a relevant professional institution. Experience in chemical, process, manufacturing, infrastructure or another high-hazard environment. Experience managing civil or structural asset integrity, inspections, repairs or infrastructure programmes. Strong leadership, negotiation, influencing and conflict resolution skills. Excellent planning, organisation and stakeholder management skills. The ability to work collaboratively across multidisciplinary teams. A strong focus on high standards, compliance and safe working. Chartered Engineer status would be welcomed. Programme or project management experience in an asset integrity environment would be beneficial. We know people gain skills in different ways. You do not need to meet every point above to apply. If this role interests you and you believe you could make a positive contribution, we would welcome your application. Why join Tioxide? Join Tioxide in a visible civil and structural engineering role where your expertise will help protect critical infrastructure, strengthen asset integrity and support safe, reliable operations across a major manufacturing site. Diversity and inclusion Tioxide is committed to building a diverse and inclusive workplace where everyone feels respected, valued and able to contribute. We welcome applications from people of all backgrounds, identities and experiences, including people from groups currently under-represented in civil, structural, engineering and manufacturing roles. Tioxide and Wolviston Management Services are happy to discuss reasonable adjustments at any stage of the recruitment process

Elvet Recruitment are recruiting a Site Engineer on behalf of a leading civil engineering contractor to work on various civils projects in Teesside and County Durham This is an excellent opportunity to get involved and support significant scheme Public Realm, Highways and Structures schemes in the North East. Duties include: • Maintain high personal safety and environmental standards., • Supervision of assistant engineers., • Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works., • Provide accurate and clear setting out for works., • Communicate with foremen and gangers to ensure full understanding of information provided., • Arrange formal checking of setting out., • Complete inspection and test plans., • Keep accurate daily site diary., • Preparation of 4 weekly programmes., • Provide accurate measurements for materials required., • Maintain material reconciliation figures for reporting., • Ensure that material delivery tickets are passed on for cost coding., • Carry out testing / sampling of materials., • Provide assistance to the measurement department., • Maintain survey books., • Take receipt of materials and perform checks. Candidates would ideally have proven experience at Assistant Site Engineer or Site Engineer level with a Civil Engineering contractor. Minimum qualification of HNC/HND, however a construction related degree is preferred. Salary/Package A salary of up to £42,000 plus company vehicle or allowance as well as an attractive package. This is a permanent position and Elvet Recruitment Limited will be acting as an employment agency for permanent recruitment on behalf our client. For more information, please contact Jack Vasey at Elvet Recruitment

TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. We offer comprehensive training, flexible working, and a great pay and benefits package. As part of the TUV family Risktec Resourcing have been tasked to assist our sister company TUV Rheinland Industrial Services (TRIS) in recruiting for a Mechanical Engineer for our Teesside office. We are looking for a Mechanical Engineer with a strong design focus to support petrochemical and process industry projects. This is a mid-level role, suited to an engineer who has moved beyond graduate level and is developing toward senior engineer and chartership. You will work on real engineering problems under the guidance of senior engineers, with increasing responsibility as your capability grows. Role Overview We are looking for a Mechanical Engineer with a strong design focus to support petrochemical and process industry projects. This is a mid-level role, suited to an engineer who has moved beyond graduate level and is developing toward senior engineer and chartership. You will work on real engineering problems under the guidance of senior engineers, with increasing responsibility as your capability grows. What You Will Do Carry out mechanical design work for static equipment such as pressure vessels, heat exchangers, columns, and drums. Perform pipe stress analysis for piping systems, with senior support on complex cases. Support fitness-for-service (FFS) assessments for existing piping and static equipment. Prepare mechanical calculations, datasheets, and technical reports. Review vendor drawings and documents against project requirements. Work closely with process, piping, inspection, and integrity disciplines. What are we looking for? Degree in Mechanical Engineering (or equivalent). Typically 3–7 years’ experience in mechanical engineering within petrochemical, chemical, or process plant environments. Working knowledge of: Static equipment and pressure vessels, Pipe stress analysis, Fitness-for-service concepts Experience using engineering software such as CAESAR II, AutoPIPE, PV Elite, COMPRESS, or similar. Familiarity with relevant codes and standards (e.g. ASME, EN, API). What we can offer you? Hybrid work model and flexible working hours Annual bonus subject to company and individual performance A package of benefits: Group life insurance, workplace pension scheme, employee discounts, Salary sacrifice options Well-being Support Work in a friendly, diverse and high-qualified team with positive and cooperative working atmosphere International environment and daily usage of foreign languages Real development opportunities Direct communication and no formal dress code Employee referral programDevelopment & Chartership Actively working toward Chartered Engineer (CEng) status or committed to doing so. Structured technical development and mentoring from senior engineers. Clear progression toward Senior Mechanical Engineer level. This role is ideal for a mechanical engineer who enjoys hands-on design work, wants exposure to complex petrochemical facilities, and is motivated to develop toward chartership and senior responsibility. If you are detail-oriented, proactive, and ready to contribute to pioneering projects in our industry, we encourage you to apply and make a significant impact in our company. NB – (please note that UK security clearance is very difficult to achieve within the timescales for non UK nationals, and you will subject to a screening process prior to interview to ensure that you meet the security clearance criteria)

Electrical Technician Location: Middlesbrough Salary: up to £45,000 p/a Are you an experienced Electrical Technician looking for more than just another mundane role? This is an exciting opportunity to join a rapidly growing specialist within the pump hire, installation, and maintenance sector at a pivotal stage of its expansion. Based from the Middlesbrough depot, you'll play a key role in supporting customers across the North East while helping shape the future of a depot that has been established for less than a year, but is part of a wider group that have seven other depots across the UK. If you're looking for genuine career progression, ongoing training, and the opportunity to fast-track into leadership, this could be the perfect next step. Why Apply? Fast-Track Career Progression The Middlesbrough depot is in the early stages of its growth journey, creating a clear pathway into Team Leader and Supervisor-level positions as the operation expands. Make a Real Impact This isn't a role where you'll be just another number. You'll have the opportunity to influence processes, contribute ideas, and play a significant role in the depot's ongoing success. Continuous Training & Development You'll receive ongoing support and professional development, including training at the company's Head Office in Gloucester and exposure to operations across the wider business. Excellent Earning Potential Up to £45,000 basic salary Fully expensed van and fuel card Overtime available Travel pay Call-out payments All accommodation, meals, and travel expenses covered when working away from home Varied & Challenging Work Work with industry-leading pumping and control systems across a wide range of customer sites, projects, and applications. The Role As an Electrical Technician, you will be responsible for: Repairing, servicing, maintaining, and testing electrical control panels Diagnosing and fault-finding on pumps and associated electrical systems Installing and connecting pumps and control panels Commissioning electrical systems to customer requirements Reading and interpreting electrical schematics and relay logic Supporting both depot-based and on-site projects Maintaining high standards of health, safety, and quality Completing service documentation and records accurately Location & Travel The long-term focus of the role will be supporting projects across the North East, particularly around Middlesbrough. However, candidates must be willing to travel throughout the UK as required, particularly during onboarding and training. This will include working alongside experienced teams at other depots and attending development and training programmes at the company's Head Office in Gloucester. Essential Requirements ECS Gold Card 2391 Inspection & Testing qualification (or equivalent) 18th Edition Wiring Regulations Strong electrical fault-finding and maintenance experience Experience working with industrial electrical systems and control panels Ability to read and interpret electrical schematics and relay logic Full UK Driving Licence Desirable Experience Variable Speed Drives (VSDs) Pump industry experience Electrical commissioning experience Water industry or utilities sector experience Knowledge of submersible pumping systems What's in it for You? This is a fantastic opportunity to join a business that is actively investing in its people and infrastructure. You'll gain exposure to a wide variety of projects, receive ongoing development and training, and have a genuine opportunity to progress into leadership as the Middlesbrough depot continues to grow. To apply, please submit an up-to-date CV. For any questions regarding the role, candidates can contact: TPBN1_UKTJ

We are currently recruiting for an Electrician to support operations at a COMAH-regulated chemical manufacturing facility. This role focuses on electrical maintenance and reliability within a hazardous area environment, ensuring safe and efficient plant performance. Key Responsibilities: Fault finding and maintenance on LV electrical systems including motors, MCCs, and switchgear Inspection, maintenance, and installation of Ex-rated equipment Support planned preventative maintenance and reactive breakdown activities Interpret electrical drawings and schematics Work in line with permit-to-work and LOTO procedures Requirements: NVQ Level 3 or equivalent in Electrical Engineering CompEx EX01–EX04 certification (essential) Proven experience in hazardous area environments (ATEX/COMAH) Strong industrial electrical maintenance background Experience within chemical, oil & gas, or energy sectors This is an opportunity to work within a technically demanding and safety-critical environment on a short-term contract

ARE YOU LOOKING FOR A CAREER CHANGE WITH EXCELLENT DEVELOPMENT OPPORTUNITIES? TQ NEEDS YOU TO JOIN OUR TEAM! ABOUT US Tillicoultry Quarries is a successful and fast-growing family-owned quarrying company and major supplier of aggregates, asphalt, ready-mixed concrete, mortar, render and sports sand to the building and road construction industry. We operate in over 35 sites throughout Central Scotland, the Northeast of England and East Anglia. Due to our continued success and rapid growth an excellent opportunity has arisen for a Plant Fitter based in Middlesbrough. The successful candidates should be customer focused, reliable, well organised and be able to work well as part of a team in a busy site environment. This is a mobile role and travelling between plants in the North East. WHY JOIN OUR TEAM? As a family business who have been in operation for over 90 years we invest in our people and offer excellent training and career development opportunities. Our culture has grown from family values and we are proud to have a committed and passionate team of over 400 people working in a variety of different roles delivering a unique combination of quality materials and service excellence for our customers. In addition, we will provide you with the opportunity to gain vocational qualifications within 12 months of starting with us. KEY RESPONSIBILITIES Ensure all duties carried out to Company Health and Safety Policy and Guidelines. Routine Servicing of Mobile and fixed Equipment. Breakdown and defect repair. Fault finding and Diagnosis. Ensure Company vehicles and equipment are maintained in a safe, clean and tidy state. Planned inspection and planned maintenance. WHAT DO WE NEED FROM YOU? Experience in a mechanical background. Experience working in an extractives environment (Sand and gravel) Experience maintaining and repairing concrete and/or asphalt plants is desirable. A qualification in either Plant maintenance/ Agriculture/ Mechanical Engineeringthis can be NVQ /CityGuilds. A Full UK drivers licence Experience maintaining a wide range of heavy earth moving, crushing & screening equipment including Caterpillar, Komatsu, Volvo, Metso, & Finlay. Experience in using burning/ cutting equipment, Welding experience would be an advantage. Excellent communication skills able to communicate effectively in order to achieve results in a fast-paced environment. Excellent problem-solving skills can identify the problem and generate a solution in a timely and cost-effective manner. Flexible approach to work able to go that extra mile when required and revise approach to meet operational requirements. WHAT WE WILL GIVE YOU IN RETURN Competitive salary Enhanced overtime rates Fully funded VQ Pension 30 days annual leave per year Holiday purchase scheme Employee Assistance Programme Employee Discounts Platform Career development and internal progression THIS IS AN EXCITING OPPORTUNITY TO FULFIL A KEY ROLE WITHIN A FAST GROWING AND SUCCESSFUL BUSINESS. WE OFFER A COMPETITIVE REMUNERATION PACKAGE AND FANTASTIC OPPORTUNITIES FOR DEVELOPMENT AND CAREER PROGRESSION. WORKING TOWARDS A DIVERSE WORKFORCE AND EQUAL OPPORTUNITIES. TPBN1_UKTJ

Background TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of consultancy, training, testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. TUV Rheinland Industrial Services (TRIS), UK are looking for qualified candidates to join the ever-growing team as a Functional Safety Consultant on a permanent basis in either Warrington or Stockton-on-Trent, UK Offices. You will be part of an energetic and driven team and will be expected to work effectively and collaboratively with colleagues on multiple projects in a supportive, progressive environment. Our core company values teamwork, empowerment, integrity and solutions provide our cultural framework and encourage problem solving, decision making, flexibility and responsibility. We have an established competence framework, with regular appraisals and a defined pathway for progression. We strive to foster a friendly and collaborative culture where every employee can contribute to delivering outstanding engineering solutions. Responsibilities: Deliver IEC 61508 / IEC 61511 / IEC 62061 / ISO 13849 functional safety-based SIS and Machinery Safety consultancy and training services Provide specialist level technical support to TUV Rheinland clients on a range of technical queries across the applicable functional safety lifecycle Write technical papers and deliver specialist technical presentations to support TUV Rheinland functional safety service execution and work winning strategies Responsible for development and delivery of technical training related to functional safety, OT cyber security and Machinery safety solutions Build strong relationships with clients, understand their needs and assist in the delivery of tailored, pragmatic solutions. Maintain and enhance customer relationships, securing new opportunities for repeat and new consulting business. Lead assignment tasks, providing regular updates on progress and any challenges faced. Support the financial performance of consulting assignments, monitoring progress vs. costs, ensuring the timely delivery of high-quality services. Ensure compliance with company standards, customer contracts, and industry regulations. Maintain transparency in communication with clients, team members, and management.Requirements: Relevant technical engineering degree preferably in the field of Electrical / Electronics / Instrumentation / Control Systems with knowledge on OT cyber security and ideally chartered Certificated as a minimum to TÜV Rheinland FS Engineer or Exida CFSE status by examination Planning and managing the delivery of projects from proposal to successful delivery and project closure Technical report writing, communicating effectively and managing interfaces with stakeholders (internally and externally) Proactive self-starter, dedicated, innovative, resourceful and analytical with strong problem-solving skills Foster an efficient, innovative and team-oriented work environment. Communicate effectively and confidently with colleagues. Committed to meeting deadlines and upholding high standards Strong commercial and business acumen A genuine passion and desire to enhance company business efficiencyExperience Experience of working in high hazard process industries with a specific focus on safety instrumented systems and/or machine safety Scoping new work and preparing or coordinating competitive bids A recognized industry professional in Functional Safety Management with a minimum of 3 to 10 years’ experience in the key issues relating to the professional application of functional safety management for the design, engineering, operations and maintenance of SIS within an operational engineering environment Demonstratable experience of engaging in a comprehensive range of detailed technical safety related matters covering SIL determination, safety requirements specification design and engineering of SIS and operation and maintenance of SIS Significant knowledge and application of safety related market experience to be able to demonstrate an authoritative understanding of the IEC functional safety compliant relationships between end users, EPC’s, systems integrators and device/machine manufacturers Experience in understanding the requirements for the development of Safety Requirements Specification Preferably having safety engineering knowledge appropriate to the application of E/E/PE Safety Related Systems Demonstrable experience of planning, leading and carrying out functional safety audits and functional safety assessments Relevant experience of delivering technical training to Clients and Stakeholders Demonstrable experience of presenting SIS/Machinery related technical updates / technical solutions and engagement directly both internally and externally with Clients, Stakeholders, Regulatory Bodies, Industry Groups and Academia Preferably a member of any standard’s technical committee such as IEC 61508 or IEC 61511 or a professional membership Having knowledge of IEC 62443 cyber security principles would be an added advantage

Background TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. We are currently recruiting for a EC&I Department Head on behalf of our sister company TUV Rheinland Industrial Services (TRIS). The suitable person must be a graduate Electrical, Control & Instrumentation Engineer, chartered with a minimum of 10 years experience. Key Responsibilities: Prepare scopes of work and estimates to support proposals. Assist in preparing project documents including scopes, schedules and reports. Deliver the EC&I engineering design scope to budgets and programmes. Co-ordinate/liaise with EC&I and other Engineering disciplines/client/package vendors. Design authority for all EC&I Prepare, check and/or approve design calculations, specifications, data sheets, reports, scope of work and drawings to British/International Standards and Codes of Practice. Design, develop, review and approve electrical and controls (IEC) engineering drawings, specifications and documents in line with national and international standards. Conduct electrical design calculations and approve calculations conducted by others including earthing, cable sizing, Short Circuit Calculation, Cantilever strength calculation, Battery Sizing calculations, voltage drop, lighting levels, cable tray fill and heat tracing etc. Prepare and review datasheets and/or procurement packages for electrical equipment. Preparation of key engineering design documents including SLD’s, Schematic Diagrams, Cable Schedules and Layout Plans. Liaise with vendors, select and oversee purchase of EC&I equipment & components. Monitor work for compliance to applicable codes, accepted engineering practices and client standards. Provide specialist design input to 3D models. Prepare Technical Analysis of proposals provided by equipment manufacturers and contractors. Interpret vendor and other discipline drawings/information. Attend and participate in safety reviews, risk reviews, planning reviews, model reviews and constructability reviews. Manage conflicting priorities among simultaneous projects. Identify and raise scope changes. Comply with Company Quality Manager Systems. Other professional duties as reasonably required. Key skills required include: Background in Heavy Engineering/Chemical/Petrochemical/Oil & Gas Industries. Minimum of 10 years of EC&I experience, preferably in oil & gas, chemicals and/or other high hazard process industries. Appropriate Technical Engineering Degree and preferably a Chartered Engineer with an appropriate institution. Knowledge of regulations, codes, manufacturing standards, and industry standard practices. Ability to work in a multi-disciplinary team environment. Ability to allocate work appropriately to design staff and monitor progress to meet project needs. Ability to work in both design office and operating plant environments. Comfortable dealing directly with both Clients and Vendors at all levels. Knowledge of ATEX and equipment for electrically hazardous areas. Knowledge or experience of Functional Safety, preferably holding a suitable Functional Safety qualification. Expertise using MS office suite and knowledge of AutoCAD. Experience in the use of AVEVA E3D. Experience in the design of HV and LV Power distribution systems, LHV/LV Switchgear Panels and MCC’s. Experience in Relay Coordination, Load Flow, Short Circuit and Motor start studies. Exposure to IEC, IEEE, IS, CBIP & ANSI Standards. Proficiency in AUTOCAD, DIALUX, CG LUX Software. What can we offer you? Full Time Permanent position Company car 25 days annual leave, plus Bank Holidays Annual bonus subject to company and individual performance A package of benefits: Group life insurance, workplace pension scheme, employee discounts, Salary sacrifice options Well-being Support Work in a friendly, diverse and high-qualified team with positive and cooperative working atmosphere NB – (please note that UK security clearance is very difficult to achieve within the timescales for non UK nationals, and you will subject to a screening process prior to interview to ensure that you meet the security clearance criteria)

Role Purpose As a Roll Operative you will be a key part of our clients production team, operating plate rolling equipment and supporting the plating and finishing function. We are looking for someone who ideally already has experience in plating operations, but we are happy to train a candidate with strong mechanical aptitude and a willingness to learn. Key Responsibilities Operate plate rolling / section rolling machinery safely and efficiently Set up, adjust, and monitor rolling equipment to required specifications Work with plating / finishing team: apply surface treatments (e.g. galvanising, powder coating or equivalent, as relevant) Assist in preparation of plates prior to finishing (cleaning, masking, inspection) Carry out quality checks to ensure tolerances, dimensional accuracy, surface finish Coordinate with fabrication, cutting, and finishing teams to meet production schedules Perform routine maintenance, cleaning, and minor adjustment of machinery Adhere to health & safety procedures, including safe handling of heavy steel plates Maintain accurate production records (e.g. timesheets, batch logs) Help to coach / mentor newer operatives once trained Person Specification / Requirements Essential: Experience in plating / finishing operations (or in a related metalworking / surface treatment role) Mechanical aptitude; good understanding of machine operation Ability to read technical drawings, tolerances, and specifications Good hand-eye coordination and physical fitness (lifting, manoeuvring plates) Strong attention to detail and quality focus Good communication skills and ability to work within a production team Self-motivated, reliable, and willingness to learn new skills Desirable: Experience in steel / plate processing, rolling, profiling Experience in maintenance / minor repairs of machinery Knowledge of health & safety standards specific to steel fabrication (COSHH, lifting, etc.) Basic IT / data entry capability for production logging What We Offer Temporary to permanent progression opportunity Training and development in rolling, plating, finishing Competitive hourly rate / salary (depending on experience) Overtime opportunities Supportive, family-run company culture Involvement in a growing company investing in technology and people

Mechanical Inspection Team Leader, Inspection Team Leader, Lead Inspector, Senior Inspector, CMM Programmer, PC-DMIS Programmer, Quality Team Leader, Metrology Engineer, Quality Inspector, Motorsport Jobs, Formula One Jobs, F1 Careers, Aerospace Jobs, Precision Engineering Jobs, Manufacturing Jobs,

We have an exciting opportunity for a Senior Highways Inspection Officer to join us!. This is an excellent opportunity for an enthusiastic Senior Highways Inspection Officer to join our Highway Services team.

We are looking for specialist Electrical Test & Inspection Engineers for a major residential development in East London. Test and Inspection Electrician - 2391.

Finlay Jude Associates Ltd is seeking Experienced and Qualified Wastewater Supervisors to support a Dual Manhole Inspection Project on the Severn Trent Water contract in the East Midlands. This role involves supervising camera inspections of dual manholes, ensuring compliance with safety and industr

Role: SEMA Qualified Racking Remedial and Inspection Manager Location: National (UK) - Field Based Contract: Permanent Salary: Competitive Salary +Car Allowance + Benefits Omega are supporting a growing UK business in their search for a SEMA Qualified Racking Remedial and Inspection Manager. This is

Be competent in the use of the businesses chosen inspection equipment. Technician, QualityApplylocations: GB - Adlingtontime type: Full timeposted on: Posted Todayjob requisition id: 22958Technician, Quality - JBTMarel Proseal (Adlington UK)Key Tasks and Accountabilities:* To carry o

Strong technical and commercial understanding of industrial inspection services, including PED, ASME, Welding, Container, or PSSR inspections. Business Development Manager (Pressure Vessel Inspection). On offer is the opportunity to be a senior BDM in a world-class organisation developing business i