Inspection jobs in PortsmouthCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

My client was founded in 1852 and is trusted by OEMS around the world. They have over a century worth of experience designing and manufacturing products for intelligent air data systems and compact flight deck instruments. As the Supplier Quality Assurance Engineer, you are responsible for supporting and providing guidance to the procurement/operations team in an aerospace manufacturing environment. What we would like from the Supplier Quality Assurance Engineer: • Experience working within a Quality environment, • Ideally experience working within Aerospace and knowledge of AS9100, • Experience performing First Article Inspection Reports, • Experience performing Quality Audits, • Understanding of DFMEA, PFMEA, PPAP, APQP, Control Plans, Root Cause Analysis, • SAP or similar MRP system experience What we offer the Supplier Quality Assurance Engineer: • Salary between £45,000 to £52,000 doe, • Up to 10% Annual Bonus, • Company Pension matched up to 10%, • Private Medical Insurance, • Competitive annual leave, • 4x Life Assurance, • Share Plan, • Hybrid working (4 days in the office / 1 working from home), • 8am – 4.30pm (Monday-Thursday), 8am – 1pm (Friday) If this opportunity as a Supplier Quality Assurance Engineer is of interest to you, don’t hesitate and get in touch asap! Click to apply

As a Supplier Quality Engineer, you will be responsible for assuring the quality of products and services supplied by external suppliers, ensuring full compliance with organisational, customer, and regulatory requirements. You will drive supplier quality performance through effective quality management processes, audits, supplier development activities, and cross‑functional collaboration. This is a pivotal role in protecting the integrity of the supply chain and ensuring that end products consistently meet the high standards expected by customers and stakeholders, particularly within a regulated defence environment. The role requires significant travel across the UK (approximately 60%). While it reports to the Operational Quality Manager based at the Portsmouth site, the position could also be suited to an individual located in the North of the UK to better support travel requirements. Key Responsibilities 1. Supplier Quality Management • Develop, implement, and maintain supplier quality management systems and processes., • Establish and communicate supplier quality standards, specifications, and quality plans., • Ensure supplier compliance with contractual, regulatory, and organisational requirements. 1. Supplier Evaluation and Selection • Evaluate and support the selection of suppliers based on quality, cost, delivery, and service performance., • Conduct supplier capability assessments and approval activities., • Manage material quality for Stainless Steel, Aluminium, and Carbon Steel supply chains. 1. Audits & Inspections • Plan and conduct supplier audits and manufacturing process assessments., • Perform product and process inspections including dimensional, trial, final, and FAIR inspections., • Identify, document, and manage non‑conformances, driving effective corrective and preventive actions. 1. Supplier Development • Work in partnership with suppliers to improve quality performance and capability., • Provide technical guidance, quality support, and training where required., • Support continuous improvement initiatives across the supply base. 1. Quality Metrics & Reporting • Monitor, analyse, and report supplier quality performance (e.g. defect rates, on‑time delivery)., • Prepare quality performance reports for internal stakeholders and senior management., • Use data‑driven insight to identify trends and improvement opportunities. 1. Collaboration & Communication • Work closely with Procurement, Engineering, Production, and Operations teams., • Clearly communicate quality expectations, requirements, and feedback to suppliers., • Act as the quality escalation point for supplier‑related issues. 1. Continuous Improvement • Identify opportunities to improve supplier quality processes, systems, and performance., • Stay current with industry best practice, standards, and regulatory developments. Education & Qualifications, • Degree in Engineering, Quality Management, or a related discipline or equivalent apprenticeship qualification - CSWIP 3.0 / 3.1 / 3.2 to BS EN ISO 17637 Skills, Knowledge and Expertise • Substantial experience in Supplier Quality Engineering or a closely related role, • Proven experience working within the defence sector, • Strong understanding of defence regulatory requirements, including:, • DEFSTAN, DEFCON, QASOR Technical Skills & Knowledge • Quality Management Systems: ISO 9001, AS9100, AS9102, • Supplier auditing, assessments, and corrective action management, • Visual welding inspection, NDT, VT, • PCN Level 1 and/or AWS certification, • Creation and interpretation of ITPs, MITPs, QCPs, • Experience with Stainless Steel, Aluminium, and Carbon Steel fabrications, • Ability to read and interpret 3D models, DWF, STEP files, and PDFs, • Proficiency in quality tools and systems (e.g. Minitab, SAP QM), • Familiarity with ERP and MRP systems Certifications (Desirable) AS9100 / ISO 9001 Lead Auditor Six Sigma or other recognised quality improvement certifications Skills and Attributes • High attention to detail and accuracy, • Strong analytical and problem‑solving capability, • Confident, clear communicator with strong interpersonal and influencing skills, • Assertive, resilient, and adaptable to change, • Highly organised with the ability to manage multiple priorities, • Collaborative team player who actively contributes and coaches others when required, • Commercially aware with an understanding of how quality performance impacts production and customer fulfilment, • Committed to health, safety, environmental compliance, and continuous improvement, • Welcomes and promotes diversity and inclusion Travel Requirements UK‑based role with regular supplier visits Approximately 60% travel / 40% office based Other Requirements • Candidates must have an existing right to live and work in the UK, • Candidates must have passed UK security clearance to the Security Check level or be able to obtain this level. To gain SC clearance will normally require a candidate to have been resident in the UK for a minimum of 5 years. Benefits Along with competitive salaries, CMS2 offers a great benefits package that includes life insurance, a generous leave allowance and more.

Quality Assurance Engineer 12 month contract Based in Portsmouth Offering £36ph Inside IR35 Do you have experience performing Quality Assurance activities? Do you have experience in the Defence and Aerospace industry? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Quality Assurance Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Write a Quality Surveillance Plan (QSP) and continuously maintain it in accordance with project requirements, • Write specific instructions to define the inspection processes or checks, • Chair gates reviews as defined in the project and as agreed with project PA (Manufacturing Readiness Review, Integration Readiness Review, Test Readiness Review, Test Readiness Board, Delivery Review Board, Pre-Shipment Review, Shipment Readiness Review...), • Create the Key Inspection Plan and support the Mandatory Inspection Plan, • Prepare the incoming inspection plan/checklist, • Review AIT work instructions for technical integrity, regarding product quality requirements including inspection, verification points, and configuration status, • Manage all NCRs within the defined scope in AIT using problem solving tools, • Confirm non-conformances and ensure robust closure using PPS techniques, • Support the elaboration and the efficiency of performance dialogue/SQCDP in the working area (schedule, daily work to achieve, top priorities, KPIs, achievements...), • Provide reports as required by functional and project management, • Provide monthly report of Quality Key Performance Indicators (KPIs), • Being the QA focal point for Critical Movements within the production facility Your skillset may include: • HND in relevant field, • Experience in Quality Assurance, • Experience in Defence and Aerospace If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Are you a Quality Engineer who enjoys solving complex problems, working closely with customers and driving continuous improvement? Do you thrive in regulated manufacturing environments where quality, compliance and precision are critical? If so, this could be an excellent opportunity. We’re recruiting for a well-established advanced manufacturing business operating within a highly regulated engineering sector. This role sits within the Quality team and plays a key part in ensuring products, processes and systems meet the highest industry standards. What’s the role all about? As Quality Engineer, you’ll provide quality assurance support across the business — working with customers, suppliers and internal manufacturing teams to ensure compliance with industry standards and customer requirements. You’ll be responsible for investigating quality issues, leading root cause analysis and supporting product and process improvements across the organisation. Your responsibilities will include: • Reviewing customer quality requirements to ensure correct implementation, • Acting as a key customer interface for quality-related matters, • Investigating internal and external non-conformances, • Leading root cause analysis and corrective actions using 8D methodologies, • Supporting the collection and analysis of quality data within manufacturing, • Participating in customer and third-party audits and managing follow-up actions, • Conducting internal and supplier audits and managing closure of non-conformances, • Supporting supplier evaluation and Approved Supplier List (ASL) management, • Preparing part approval documentation for new or modified products/processes, • Supporting AS9102 First Article Inspection Reports (FAIR), • Analysing product and process performance to drive continuous improvement, • Supporting product development, design reviews and reliability activities, • Supporting development of process capability, control plans and process audits, • Ensuring release documentation (e.g. CoCs and Data Dossiers) is complete prior to shipment This is a varied role combining quality engineering, customer interaction and continuous improvement. What you’ll need To succeed as a Quality Engineer, you’ll bring: • ONC / HNC in Quality or Engineering (or equivalent), • Certified Lead Auditor qualification, • Minimum 2 years’ experience in a Quality role, • Experience within a highly regulated industry such as aerospace, automotive, medical or nuclear, • Strong understanding of problem-solving methodologies (8D, Root Cause Analysis), • Knowledge of quality standards such as ISO9001, AS9100 or NADCAP, • Understanding of engineering drawings, materials and manufacturing processes, • Strong analytical and data interpretation skills Desirable: • CQI qualification (e.g. Diploma in Quality Management), • Knowledge of Lean Manufacturing and Six Sigma tools, • Familiarity with pressure vessel standards such as ASME VIII, PD5500 or PED About you You’re a proactive, analytical and detail-driven engineer who enjoys working across departments to solve problems and improve processes. You’ll be: • A strong communicator who builds relationships with customers and suppliers, • Comfortable working in cross-functional teams, • Methodical in your approach to investigations and analysis, • Self-motivated and capable of working independently, • Focused on delivering quality and continuous improvement Why apply? • Opportunity to work within a highly regulated advanced manufacturing environment, • Exposure to complex engineering products and processes, • Strong cross-functional collaboration with engineering, manufacturing and customers, • Real opportunity to drive improvements and influence quality systems, • Stable, technically challenging environment with strong long-term prospects Interested? If you’re a Quality Engineer looking for a technically challenging role in a highly regulated manufacturing environment, we’d love to hear from you. Apply today or contact us for a confidential discussion. Kingdom People are acting as an Employment Agency in relation to this vacancy.

About the role: Ensure conformity of production and test operations within the Cleanroom in accordance with Plans, Processes and Procedures for Space Equipment production, to approved quality standards in particular ECSS-Q-ST-70-08, 28 & 38. Responsible and accountable for the correct “as built as design” validation Responsible for the environmental and H&S control of assembly, integration & test activities in accordance with the appropriate standards. Early / Late shift pattern when required by production Part of the overall Quality team supporting Digital Payload Group activities across Portsmouth, Stevenage and Ottobrun. Where required, support to Key Inspection Points (KIPs) for the physical inspections Key Responsibilities • Promote a quality-first mindset through Production operations aimed at the prevention of non-quality in the cleanroom., • Monitor and drive world-class workmanship standards and clean room practices/processes, • Perform design and integrity verification inspections on Flight Hardware and Test set-up in accordance with Client's inspection criteria in addition to ECSS-Q-ST-70-08, 28 & 38 to ensure that the build complies with established design and quality rules., • Identify and record non-conformities and investigate with manufacturing engineering, PA, M&P / Process Owner, • Support Root cause analysis of non-quality events with Project Quality to prevent further occurrences, • Perform internal audits on cleanroom activities as directed by the Equipment Quality group, • Complete QVP verifications as directed by the Equipment Quality Assurance Group, • Key Inspection Points (KIPs) for the physical inspections, • Support specific operational tasks such as critical move, Ready for Test process activities and flight packing, • Promote Health and Safety and 5S culture in the cleanroom. Monitor operators & visitors in line with policy, • Ensure the work environment in the cleanroom is compliant with the Health & Safety policy and any risks are mitigated., • Perform documentation checks, paperwork completion and approval of reworks as required., • Control and maintenance of quarantined Equipment, • Review and verify the certification of Production and Test staff participating in the various process activities, through the skills matrix and certification procedures. Key Requirements • Min 3 years of experience as a Quality Inspector in Electronics manufacturing, PCB, • Experience working with ESA. ECSS OR IPC standards (essential), • ECSS/ESA-Certified Quality InspectIon is a plus (European Cooperation for Space Standardization), • Background in Space, aerospace, defence, or high-reliability industries, • Ability to read and interpret engineering drawings and schematics, • Experience with inspection tools and measurement equipment, • close attention to detail and a quality-focused mindset, • No security clearance Needed Desirable • Experience in cleanroom or controlled environments, • Familiarity with AIT (Assembly, Integration & Testing) environments About Us A leading international provider of solutions and expertise, specialising in the fields of digital systems and business performance The SCALIAN Group provides support to major industrial and service-sector companies to help them define and implement their projects in two fields: Digital Systems Embedded and critical systems, IoT, information systems, and digital solutions for businesses Operations Performance: Management of projects, quality, and industrial performance We are present in seven countries (France, Spain, Belgium, UK, Germany, USA and Canada).

The purpose of this role within the Operations department will be to prepare, install, operate & maintain Power Generation equipment within our facility or on customer site locations to ensure an excellent level of customer experience is delivered to all customers. Responsibilities Include: • Preparation of equipment to a ready for hire condition including any relevant cleaning, maintenance, inspection & testing., • Attending customer site locations to perform maintenance, attend breakdown requests or any other associated customer requests., • Maintaining equipment maintenance & inspection records., • Identification & ordering of spare parts required to facilitate any repairs., • Completion & submission of any equipment, contract related documentation., • Complete Pre-Delivery Inspections of equipment prior to dispatch to our customer site locations., • Complete preventative maintenance in line with equipment manufacturers guidelines, • Generator synchronisation, • Load testing of generators, • Fault diagnosis & resolution, • Mechanical Repair, • Installation & Commissioning of Power products to electrical regulations, • Alternator Configuration, • Generator synchronisation, • Load testing of generators, • Fault diagnosis & resolution, • Electrical Repair For this role you must have previous experience with maintaining and repairing power generation equipment. This is a role that offers fantastic future opportunities to move up within the business.

Working on Space Equipment primarily for (European Space Agency missions/Telecommunications Satellites), with responsibility for the implementation of the Project Quality Assurance requirements to ensure that the delivered Equipment is compliant with the Customer's Contractual Requirements. Key Responsibilities Financial • Estimate, manage, and control all quality-related costs associated with assigned projects. Design & Engineering • Participate in significant programme, engineering, and management meetings., • Ensure Product Assurance requirements are fully implemented internally and externally., • Review and approve drawings, procedures, and associated amendments., • Prepare quality plans and risk mitigation plans., • Support lessons learned and continuous improvement activities. Procurement & Supplier Quality • Ensure procurement Product Assurance requirements are implemented effectively., • Conduct supplier and subcontractor audits where required., • Support external product assurance activities and supplier quality management. Manufacturing / Assembly / Integration / Test (AIT) • Support Non-Conformance Review Boards (NRBs) and problem-solving activities., • Ensure appropriate work instructions, documentation, and quality records are maintained throughout the product lifecycle., • Oversee inspections and quality verification activities., • Review test plans and procedures to ensure compliance and readiness. Review & Governance Activities The EPAE will lead or support the following reviews: EQSR (Equipment Qualification Status Review) • Ensure justification of materials and processes based on qualification and heritage. MRR (Manufacturing Readiness Review) • Chair reviews to confirm readiness for manufacturing and assembly activities., • Approve Manufacturing Inspection Points (MIPs). TRR (Test Readiness Review) • Chair reviews to ensure all preparations for testing activities are complete. TRB (Test Review Board) • Chair internal test review boards., • Review test outcomes and ensure all non-conformances are captured and managed. DRB (Delivery Review Board) • Ensure all delivery review activities are completed adequately and on schedule prior to equipment delivery. General Duties • Work collaboratively within multidisciplinary project teams., • Provide specialist quality and product assurance guidance where required., • Proactively implement lessons learned and preventive actions., • Review company standards and recommend improvements., • Chair Non-Conformance Review Boards (NRBs)., • Produce NCR statistics and quality metrics to support project-level decision-making., • Perform additional duties as requested by the Head of Equipment Quality. Skills & Experience Required Essential Skills • Excellent communication and facilitation skills., • Strong problem-solving and teamwork capabilities., • Passion for and understanding of the space industry., • Experience supporting RF and/or Digital Electronic equipment design and manufacturing., • Knowledge of company quality systems and quality management processes. Technical Knowledge • Understanding of Product Assurance requirements for space applications., • Familiarity with manufacturing, integration, and test processes., • Knowledge of non-conformance management and quality review processes. Qualifications • HNC, Degree, or equivalent qualification in an appropriate technical or engineering discipline. Management No direct management of staff but typically indirect management of 5 people About Us A leading international provider of solutions and expertise, specialising in the fields of digital systems and business performance. The SCALIAN Group provides support to major industrial and service-sector companies to help them define and implement their projects in two fields: Digital Systems: Embedded and critical systems, IoT, information systems, and digital solutions for businesses. Operations Performance: Management of projects, quality, and industrial performance. We are present in seven countries (France, Spain, Belgium, the UK, Germany, the USA and Canada).

We're looking for a Senior Engineer to join our regional build team based in Southampton. Location: Southampton - remote working available, with occasional travel to the office required. Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. We are unable to offer certificates of sponsorship to any candidates in this role. Join our regional build team as a Senior Engineer, where you'll play a key role in planning and delivering structures work across our contracts. This position offers the chance to work on varied projects, from inspection programming to coordinating maintenance delivery, whilst collaborating with a supportive team in a dynamic environment. What will you be responsible for? As a Senior Engineer, you'll be working within the Construction team, supporting them in the day-to-day planning, management and delivery of structures work. Your day to day will include: • Planning works and inspections in collaboration with the Contracts Manager and Programme Manager, ensuring delivery within time frames and contract requirements whilst meeting KPIs, • Attending internal and external meetings, providing programme updates and working closely with inspectors and engineers to keep project schedules on track, • Monitoring programmes daily, capturing essential notifications, identifying critical activities for successful delivery and maintaining up-to-date scheme registers, • Tracking key performance indicators, managing task requests from clients and developing design and build delivery programmes for client approval, • Reviewing health and safety documentation, ensuring subcontractor risk assessments meet standards and overseeing completion of safety files and certificates What are we looking for? This role of Senior Engineer is great for you if: • You hold an HNC or equivalent in Civil Engineering and SMSTS or SSSTS qualification, • You have experience in traffic management, highways environments, rail or London Underground projects, • You're comfortable managing multiple schemes and projects simultaneously, • You hold a full driving licence to visit depots and sites as required We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits _. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan _. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to #joinkier.

Mon–Thurs 8:00–17:00, Fri 8:00–12:00 (Flexi Working).Carrying out dimensional inspections on in-house and outsourced parts/assemblies.Working to inspection criteria, engineering drawings, standards, and purchase orders.Using measurement tools, gauges, fixtures, and microscopes/digital microsco

Quality Technician / Inspector. Work closely with production teams to resolve quality issues and maintain product standards. Support quality and inspection activities, including reporting results, checking materials, and maintaining inspection equipment.

Drama Teacher in Secondary School based in Fareham Starting ASAP Pay – £150 - £210 Location – Fareham Hours - 8:00am – 4:00pm Temporary full-time About the School: The School is a mixed Secondary School for students aged from 11 to 16 years with around 700 students in total. The School is based in Fareham. The school was graded as a Good School in its last Ofsted inspection and continues to perform well. Qualifications Required: - Qualified Teacher Status (QTS) - Bachelor's degree in Drama, Performing Arts, or a related field (Master's degree preferred) - Previous experience teaching drama at the secondary school level - Strong knowledge of drama techniques, theories, and history - Excellent communication and interpersonal skills - Ability to inspire and motivate students - Commitment to fostering a positive and inclusive learning environment - Are you an enthusiastic and qualified Drama Teacher looking for an exciting opportunity to insp...

My client was founded in 1852 and is trusted by OEMS around the world. They have over a century worth of experience designing and manufacturing products for intelligent air data systems and compact flight deck instruments. As the Supplier Quality Assurance Engineer, you are responsible for supporting and providing guidance to the procurement/operations team in an aerospace manufacturing environment. What we would like from the Supplier Quality Assurance Engineer: • Experience working within a Quality environment, • Ideally experience working within Aerospace and knowledge of AS9100, • Experience performing First Article Inspection Reports, • Experience performing Quality Audits, • Understanding of DFMEA, PFMEA, PPAP, APQP, Control Plans, Root Cause Analysis, • SAP or similar MRP system experience What we offer the Supplier Quality Assurance Engineer: • Salary between £45,000 to £52,000 doe, • Up to 10% Annual Bonus, • Company Pension matched up to 10%, • Private Medical Insurance, • Competitive annual leave, • 4x Life Assurance, • Share Plan, • Hybrid working (4 days in the office / 1 working from home), • 8am 4.30pm (Monday-Thursday), 8am 1pm (Friday) If this opportunity as a Supplier Quality Assurance Engineer is of interest to you, dont hesitate and get in touch asap! Click to apply or contact Luke Tanner at Orion...

Join a large contractor based in Fareham and receive a company van, fuel card, and all essential tools from day one. As an Electrician, you will be responsible for carrying out responsive maintenance and repair work within domestic properties. This opportunity is with a respected and established building contractor, known for its strong reputation in the housing sector and commitment to its workforce. You’ll be joining a company that values high-quality workmanship and supports ongoing development within a stable, full-time environment. As an Electrician, you will: Electrical testing and inspection Reactive repairs and fault finding Full domestic rewiring Electrical installation in kitchens and bathrooms Installation of domestic heating systems We are looking for Electricians with: A minimum of 2 years’ experience within social housing or a building maintenance environment City & Guilds 18th Edition Electrical Regulations City & Guilds 2391 Testing & Inspection (or equivalent) NVQ Level 3 in Electrical Installation A full, valid UK driving licence Willingness to undergo a DBS check prior to starting This Electrician role is offering the following benefits: Company and van fuel card provided 34 days annual leave rising to 36 days (including bank holiday) Company sick pay after 12 months length of service Life insurance Company pension scheme Uniform and safety equipment provided Salary for this Elect...

Quality Inspector Location: Fareham, Hampshire Job Type: Permanent, Part-Time Salary: £30,000 per annum Hours: 37.5 weekly with early finish on Fridays! Job Description As a Quality Inspector you will ensure that products meet specified quality standards throughout the manufacturing process. This role involves inspecting materials, components, and finished goods to identify defects or deviations from quality requirements. You will work closely with production teams to maintain consistent quality and support continuous improvement. This position requires attention to detail, methodical inspection techniques, and adherence to safety and quality protocols. Key Responsibilities • Conduct routine inspections of raw materials, in-process components, and finished products to verify compliance with quality standards and specifications., • Document inspection results accurately, maintaining comprehensive records and reports for traceability purposes., • Identify, report, and communicate any non-conformities or deviations to the relevant teams promptly., • Support root cause analysis and corrective action processes to resolve quality issues., • Ensure all inspection activities comply with health and safety regulations and company policies., • Collaborate with production and engineering teams to...

Job Title: CNC Machinist CNC Miller – 5 Axis 12 months contract Monday – Friday Standard days or early (10%) or late shift (20% premium) £18-23.15 per hour PAYE for the CNC Machinist Immediate start available Opportunity for a skilled CNC Machinist to undertake a long term contract working for a highly reputable manufacturing company with a strong order book producing precision parts, working on exciting large scale, high precision projects. Working within a friendly, stable and highly successful manufacturing team as CNC Machinist (both CNC and manual capability) you will be responsible for the following: Performing machining to the required specifications using 5 axis fanuc controlled CNC’s Setting up machines for allocated work and ensuring the timely completion of machining work to meet project deadlines. Undertaking self-inspection as well as using a variety of precision measuring devices. Updating damaged or worn tooling Ideally the CNC Machinist will have experience in the below Machine shop environment experience working with high speed 5 axis milling machines (Mori-Seiki, DMG, NH Fastem or similar) Competent in using precision measurement equipment Ability to make edits to programs (Fanuc) CNC Pallet loading experience Experience working in a high precision environment You will ideally be apprentice trained or have relevant 5 axis CNC Milling experi...

SC Cleared Test Engineer / Systems Test Technician Location: Portsmouth (Onsite 5 Days Per Week) Shifts: Rotational Shifts (6am-2pm / 2pm-10pm) We are currently seeking a Test Engineer / Systems Test Technician to support testing and troubleshooting activities within a secure engineering environment in Portsmouth. This role involves working on system and subsystem testing, fault investigation, quality inspection, and test documentation within a highly regulated technical environment. Key Responsibilities • Install and configure test equipment, • Execute system and subsystem testing activities, • Perform initial fault-finding and troubleshooting, • Conduct first-level quality inspections, • Prepare test reports and associated documentation, • Support sensor calibration and test facility preparation, • Track and support issue resolution through to closure Required Skills & Experience • Experience within systems testing, electronics testing, or RF testing environments, • Familiarity with RF test equipment including:, • Spectrum Analysers, • RF Simulators, • Strong troubleshooting and diagnostic skills, • Ability to work to strict procedures and project timelines, • Good documentation and reporting skills Clearance Requirements Candidates must ei...

LCV Technician Our client, a reputable company based in Portsmouth, is actively seeking a skilled LCV Technician to join their professional team. This is an exceptional opportunity for an experienced automotive technician to work within a well-established business recognised for quality service and customer satisfaction. The successful individual will play a vital role in delivering high-standard repairs and maintenance in a state-of-the-art workshop environment. Benefits for a LCV Technician: Competitive basic salary of up to £45,000 per annum, depending on experience Opportunities for career progression and ongoing professional development Enhanced holiday entitlement, increasing with length of service Access to employee assistance programmes and mental health support Generous holiday allowance, increasing with service Employee discounts on various products and services Cycle to work scheme and free parking Recognition schemes, including quarterly awards Flexible shift patterns, including optional Saturday work at enhanced ratesDuties for a LCV Technician: Conduct detailed inspections, maintenance, and repairs on vans across various brands Follow manufacturer repair procedures and complete job cards accurately Remove, refit, and replace parts efficiently and to a high standard Diagnose mechanical and electrical faults, applying analytical problem-solving skills Perform safety checks and mechanical inspection...

Job Description: Approved Electrician – South Coast About the Company Our client is an established Electrical & Mechanical contractor delivering projects across the South Coast. They work heavily within secure and regulated environments including MOD sites, police facilities, schools and commercial/industrial premises. Due to continued growth, they are looking to recruit an experienced Approved Electrician to join their expanding team. The Role The successful candidate will carry out electrical installation, maintenance, testing and remedial works across a variety of commercial and industrial projects throughout the South Coast. This is a great opportunity to join a well-established business offering long-term work, varied projects and excellent overtime opportunities. Key Responsibilities • Carry out electrical installations, maintenance and remedial works • Testing, inspection and fault finding on commercial and industrial systems • Installation of lighting, power and distribution systems • Work across MOD, police, educational and commercial environments • Complete electrical testing and certification accurately • Ensure all works are completed in line with current regulations and health & safety standards • Maintain high standards of workmanship and professionalism on client sites • Work independently and as part of a wider engineering team Requirements • NVQ Level 3 in ...

Testing & Inspection Electrician £42k + Car Allowance & Private Healthcare. Are you currently an Electrician looking for the next opportunity to grant you a step up? The scenario may be that you are currently working endless contract work, chasing outstanding payments, or wanting to make the step up into a self-sufficient electrical role. If so, then we have the role for you The following role will act as an impartial inspector generating wiring readings, carrying out test inspections, producing regulated inspection reports, all to industry standards. Planning will be completed to fulfill inspections, whilst managing client relations & supported change if necessary. The client we are working with offer the stability & scope of working for a large firm, but with the freedom of working independently. They work with a diverse range of clients across I&C sectors, with this role situated across theSouth Coast of the UKoffering a world-class training & progression programme to enable you to continue career growth. Qualifications: • City & Guilds Part 1, 2 & 3 OR NVQ Level 3 OR City and Guilds 2365 Diploma in Electrical Installation., • 18th Edition required. Benefits: • £42k starting base., • £2k joining bonus., • £5000company car allowance or company car., • Private health...

Electrician – Commercial Works, Portsmouth Area Full-Time / Self-Employed Considered Competitive Rates Depending on Experience We are looking for a reliable and experienced electrician to join our growing team carrying out commercial electrical works across Portsmouth and surrounding areas. The Role You will be involved in: Commercial electrical installations and maintenance Carrying out EICRs (Electrical Installation Condition Reports) Completing remedial works following inspections Fault finding and testing Working across a range of commercial properties Requirements NVQ Level 3 in Electrical Installation 18th Edition Qualification Testing & Inspection qualification (2391 or equivalent preferred) Experience with commercial projects and EICRs Full UK driving licence preferred Ability to work independently and professionally What We Offer Consistent ongoing work Up to £250 / day - c£65,000 per annum Opportunity to grow with the business * Friendly and professional working environment If you’re a motivated electrician with experience in commercial works, testing, and remedials, we’d like to hear from you...

Quality Engineer (SQA) Portsmouth, Hampshire £35,000 – £42,000 (Negotiable based on Experience) Full Time, Permanent The Opportunity We’re recruiting for a Quality Project Engineer & SQA to join a precision engineering environment working on high-spec, tight-tolerance components. This is a fantastic opportunity for someone with a strong quality background in CNC/manufacturing who wants to play a key role in driving product quality, supplier performance, and continuous improvement across the business. The Role Reporting to the Quality Manager, you’ll be responsible for ensuring products meet exacting standards, often at micron-level tolerances, while supporting process improvements and supplier quality performance. You’ll work closely with production, engineering, and suppliers to drive quality from design through to final inspection. Key Responsibilities Quality & Inspection Develop quality plans, inspection methods, and work instructions Perform and oversee first article, in-process, and final inspections Utilise CMM and advanced metrology equipment to validate components Ensure compliance with ISO9001 and AS9100 standardsNon-Conformance & Improvement Manage non-conformances (NCRs) and lead root cause analysis (8D, 5 Whys) Drive CAPA activities to improve processes and reduce defects Lead continuous improvement initiatives to improve yield and reduce scrapSupplier...

Are you an Electrician with strong wiring and containment experience looking for your next contract role on the Isle of Wight Do you have the ability to work independently and confidently manage residential communal area projects Workshop Recruitment is looking for an experienced Electrician to support a well-established contractor on a 4–5 week contract across residential communal areas on the Isle of Wight. This Electrician role will involve a variety of electrical works, with a strong focus on wiring and containment installations in residential , mainly communal areas. This is an excellent opportunity for a reliable Electrician seeking a short-term contract with competitive day rates and travel support for Portsmouth-based candidates. Must live in the Portsmouth area, or on the Isle of Wight. Responsibilities Carry out wiring and containment installations in residential communal areas Complete general electrical installation and maintenance work Install and terminate electrical systems safely and efficiently Read and work from electrical drawings and specifications Conduct testing and inspection where required Ensure all work is completed to current regulations and standards Maintain a safe and tidy working environment Work independently and manage daily tasks effectively Skills & Experience Required Proven experience as an Electrician within residential or commercial environments Strong wiring and containmen...

Solar Electrician Salary: up to £45,000 Overview We are seeking a skilled Solar Electrician to support the installation of solar PV systems across new build residential developments. This role suits someone experienced in structured site environments where scaffold, materials, and labour plans are already in place and running efficiently. You will be responsible for the electrical installation, testing, and commissioning of solar systems, ensuring all work meets current regulations and high-quality standards. Key Responsibilities Electrical installation of solar PV systems on new build properties Wiring, inverter installation, and system connectivity Testing, inspection, and commissioning of systems Ensuring compliance with electrical regulations and safety standards Working collaboratively with roofers and site teams to maintain workflow Troubleshooting and resolving installation issues where required Requirements Qualified Electrician (NVQ Level 3 or equivalent) 18th Edition Wiring Regulations Proven experience with solar PV installations Experience working on new build housing sites Strong understanding of testing and commissioning procedures Ability to work efficiently within organised site setups Desirable ECS/CSCS card Experience working with major housebuilders What We Offer Competitive salary of up to...

Electronics Inspectors Required ASAP Portsmouth, Hampshire. £14-15ph. Immediate Starts available We have excellent opportunity for Electronics Inspectors to work for a manufacturing company based in Portsmouth, Hampshire. Please see further details below: Roles: Electronics Inspectors Location: Portsmouth, Hampshire Duration: Both temporary and permanent roles available Salary: £14-15/hour Working Hours: 8am - 5pm Monday to Friday The Electronics/PCB Inspector will be required to visually inspect PCB's to ensure that they meet quality standards. Duties/tasks will include; Inspect PCBs to IPC-A-610, class 3 to ensure quality of product using the latest magnification equipment & AOI and XRay Liaise with Production Assist and support Production Technicians by discussing faults and findings to include Internal Training of the Team Manage and resolve inspection queries and raising NCR's as applicable Completing all NCR paperwork Monitor build, quality and report quality issues as necessary. Action rework as necessaryPCB Inspector - other skills/knowledge required; Understand component identification codes such as resistors, capacitors and ICs Able to interpret engineering drawings and bills of materials (BOM) Previous inspection and assembly experience to IPC-A-610 class 2 minimum desirable Attention to detail and accuracy Ability to concentrate for extended periods of time on repetitive tasks ...

Telecoms Fibre Engineer / FTTP Engineer We are hiring for an award-winning company offering exceptional telecoms fibre training & fibre engineer job opportunities. Start date of Telecoms Fibre Engineer / FTTP Engineer - Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer - Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : - Completing Fibre Installations - Overhead / Underground jobs - Completing Fibre Surveying / Repairing Orders - You will be given full and continuous training in this role, and support throughout your working day. - Site Inspection Evaluations Including, Traffic Management to be conducted - Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : - Full UK driver's license with no more than 6 points on. Training provided for Telecoms Fibre Engineer / FTTP Engineer : - If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your training. - Full attendance every day, Monday to Friday, is mandatory, missing days is not an option, as it will affect your ability to complete the course and progress within the role into your buddy period. Telecom Fibre Engineer / FTTP Engineer ...

Our engineering and manufacturing clients based close to Havant have an exciting opportunity for a Quality Engineer to join their growing team. Responsibilities • To carry out all inspections such as first off, last off, incoming, and outgoing goods, of detailed parts, assemblies and documentation in a timely and efficient manner, using mechanical or electronic measuring equipment., • Responsible for verifying components meet specification and customer requirements using detailed drawings, the customers condition of supply, company procedures and layouts. Final release of parts to customer including raising and signing certificates of conformity., • Action and complete First and Last Article Inspection reports as per customer requirements., • Responsible for the non conformance process. Interface with customers, suppliers and personnel on quality requirements and non-conformances. This includes reporting all component and documentation non-conformances using the appropriate documents and forms to the relevant Team Leader and Supervisor., • Non-Conformance control reports including Root cause analysis, correction, corrective, and verification of completed actions.

Role Purpose The Radar Repair Technician is responsible for the inspection, fault diagnosis, repair, testing and certification of radar electronic Line Replaceable Units (LRUs) down to component level. The role supports the availability of radar spares across the CLS contract and provides engineering support to remote radar sites to ensure contractual KPIs, quality and safety obligations are met. Key Responsibilities • Inspect, fault-find and repair failed radar LRUs down to component level (3rd/4th line support)., • Reverse engineer complex electronic units where documentation or support is limited., • Test, certify and release repaired units to ensure safety, compliance and quality standards are met., • Source obsolete or ageing electronic components using approved online and specialist suppliers., • Maintain responsibility for workshop safety, quality compliance and continuous improvement activities., • Maintain, manage and calibrate all tools and test equipment required to support the electronics workshop., • Package, track and distribute repaired LRUs to remote radar sites., • Provide engineering support to Remote Radar Head (RRH) sites, including radar modifications and installation tasks when required., • Assist with spares management and the movement of LRUs between workshop and remote sites., • Work closely with Logistics, RRH Site Managers and System Man...

Job Title: Experienced CNC Miller (Programmer / Setter / Operator) Location: Havant Job Type: Full-time, Permanent About the Role An established specialist engineering and manufacturing business is seeking an experienced CNC Miller to join its growing manufacturing team. The company supplies precision components to a broad range of industries including packaging, converting and print. This is an exciting opportunity to join the business during a period of sustained growth and operational development. The organisation is investing in modern systems, strengthening internal processes, and building a high-performing team to support ambitious expansion plans. The successful candidate will play a key role in producing high-quality precision components while supporting the company's focus on quality, reliability and continuous improvement. Key Responsibilities ⦁ Programme, set and operate CNC milling machines (Hurco VM2 and Hurco 60). ⦁ Manufacture precision components to engineering drawings and specifications. ⦁ Operate manual milling machines where required. ⦁ Use inspection equipment to ensure components meet required tolerances and quality standards. ⦁ Accurately record job timings using the company ERP system (implementation in progress). ⦁ Work collaboratively with CNC and manual lathe teams, as well as the design and engineering department. ⦁ Report directly to the General Manag...

Our client is contracted to provide responsive maintenance and void property works. This is for both in hours and part of a call out rota in the Portsmouth area. Workshop Recruitment are seeking a conscientious and enthusiastic Electrician with a can-do attitude and flexible approach. You must have relevant qualifications, commercial experience along with domestic, working in your core trade with additional experience and capability to complete tasks outside your competency, working in and around Portsmouth. KEY DUTIES • Electrical tests and inspections., • Reactive repairs and fault finding., • Full domestic electrical rewiring., • Electrical installation to kitchens and bathrooms., • Electrical installation of domestic heating systems, • Re-active maintenance, • Planned maintenance KNOWLEDGE AND SKILLS • REQUIRED: City & Guilds 2382 17th Edition Electrical Regulations, • REQUIRED: City & Guilds 2391 Testing & Inspection or equivalent, • 18th Edition Electrical Regulations - working knowledge desirable, • NVQ 3 in electrical installation, • Full current driving licence, • A DBS check is required before commencement of role, • 2-5 years of working in Social Housing or Building Maintenance environment., • Be able to demonstrate you are a competent tradesperson and have the tools to do the work., • Have the pre...

Quality Inspector | Portsmouth | £27,000+ | Full-Time | Permanent Are you an experienced Quality Inspector with a strong eye for detail and experience working within a manufacturing environment Do you enjoy ensuring products meet strict quality standards while supporting production teams in delivering high-quality work Workshop Recruitment is supporting a leading advanced manufacturing business in the search for a skilled Quality Inspector to join their Portsmouth team. This is an excellent opportunity for a proactive Quality Inspector looking to work within a quality-focused environment supporting high-specification products and components. The successful Quality Inspector will be responsible for carrying out inspections across the shop floor, ensuring products meet customer specifications, internal quality standards, and industry requirements before leaving production. Key Responsibilities • Carry out shop floor inspections on products and components, • Ensure compliance with AS9100, MIL standards, and company procedures, • Use measuring equipment to verify components are within tolerance, • Record inspection findings and maintain quality documentation, • Raise non-conformance reports where required, • Communicate quality issues with production and quality teams, • Support continuous improvement and quality initiatives, • Maintain high ...

A leading mechanical manufacturing organisation based in Portsmouth are currently recruiting for a Quality Inspector to join their growing team on a permanent basis. Working as part of a small team you will be responsible for detailed inspection of components and sub-assemblies for a highly regulated set of products, completing FAIRs (First article inspection reports) and using various hand held inspection tools to ensure every part is compliant in line with detailed design drawings. Key duties include • Inspecting mechanical components and assemblies using measuring tools such as calipers, micrometers and gauges, • Reading and interpreting engineering drawings, • Performing first article inspections (FAI), in-process inspections, and final inspections on manufactured products, • Recording inspection results and maintaining accurate quality documentation and reports., • Conducting visual inspections for quality - machining defects, corrosion, cracks, or damage etc, • Preparing non-conformance reports (NCRs) where required To be considered for the role, candidates will have a proven track record inspecting machined parts and sub assemblies using various hand held tools. You will also have experience in writing FAIRs and N...

Are you an experienced CMM Inspector with a strong background in manufacturing quality and precision measurement? We are looking for a detail-driven and technically strong CMM professional to join our Quality team. In this role, you will be responsible for ensuring all products meet customer, regulatory, and ISO standards through accurate inspection, reporting, and continuous improvement activities. Reporting to the Quality Manager, you will play a critical role in maintaining product integrity, supporting production, and driving quality excellence across the business. The Role As a CMM Inspector, you will: Programme and operate CMM (Coordinate Measuring Machines) to inspect precision components Interpret and work from detailed engineering drawings, including GD&T Perform First Article Inspection Reports (FAIR) and support Production Part Approval Process (PPAP) submissions Ensure all inspection documentation meets customer and regulatory standards Support New Product Introduction (NPI) activities by defining and validating quality requirements Conduct in-process and final inspection to ensure compliance with specifications Maintain accurate inspection records and quality documentation Key Responsibilities Quality Systems & ISO Compliance Conduct internal audits to ensure compliance with ISO standards * ...

Electrician - Havant Perm Role Build Recruitment are looking for an experienced Electrician to join a leading housing maintenance team covering Portsmouth and the surrounding areas. This is a permanent, full-time opportunity offering a competitive salary, company van & fuel card, excellent benefits and long-term career stability. You’ll be carrying out responsive electrical repairs within occupied social housing properties, delivering high-quality workmanship and excellent customer service on every job. If you take pride in your work, can work independently and enjoy making a difference for residents, this could be the perfect role for you. The Role Carrying out responsive electrical repairs and maintenance & testing Working within domestic/social housing properties Covering Portsmouth and surrounding areas Monday to Friday – 39 hours per week Company van and fuel card providedWhat We’re Looking ForEssential: City & Guilds 236 Part 1 & 2 or NVQ Level 3 in Electrical Installation 17th or 18th Edition Wiring Regulations (BS7671) Experience working within a customer-focused environment Ideally experience within social housing or domestic maintenance Ability to work independently and manage workloads effectively Full UK Driving LicenceDesirable: Experience completing EICRs City & Guilds 2391 Inspection & Testing or equivalentWhat’s On Offer Competitive out-of-hours callout payments Compa...

M Pro Recruitment are currently seeking an experienced Approved Electrician to join a growing and well-established renewable energy business operating across the domestic and commercial sectors. This is a fantastic opportunity to join a forward-thinking company specialising in Solar PV, Battery Storage, EV Chargers, Air Source Heat Pumps, Air Conditioning, Lighting and LV Distribution installations. Key Responsibilities: Electrical installation, maintenance and repair work Solar PV & Battery Storage installations EV charger installations Commercial LV distribution, containment & cabling Fault finding and testing & inspection duties Ensuring all work is completed safely and to industry standards Requirements: 18th Edition qualified 2391 Test & Inspection advantageous Experience with Solar PV and Battery systems Commercial electrical installation experience Strong fault-finding abilities Full UK Driving Licence CSCS Card advantageous Package: Company van & fuel card Mobile phone provided Full uniform & PPE Door-to-door travel paid Christmas shutdown paid in addition to annual leave Private healthcare after probation Company pension Apply below and we will be in touch...

Morson are working with one of the UK's leading aerospace manufacturer who are looking for a Senior Quality Assurance Engineer to join the team based in Portsmouth. Role Overview • Define and perform Quality Assurance (QA) activities, by ensuring correct implementation of procedures and processes, to ensure product quality meets the stated requirements, • Lead prevention and quality improvements of AIT processes, • Manage completion of corrective and preventative actions to closure, • Drive the efficient management of non-conformance and Cost of Non quality reduction Responsibilities • Write a Quality Surveillance Plan (QSP) and continuously maintain it in accordance with project requirements., • Write specific instructions to define the inspection processes or checks. Request additional inspections when needed, such as those in response to a technical warning notice., • Chair gates reviews as defined in the project and as agreed with project PA (Manufacturing Readiness Review, Integration Readiness Review, Test Readiness Review, Test Readiness Board, Delivery Review Board, Pre-Shipment Review, Shipment Readiness Review...). Ensure that all related actions are implemented., • Create the Key Inspection Plan and support the Mandatory Inspection Plan., • Prepare the incoming inspection plan/checklist., • Review AIT work ...

Electrician Commercial Works, EICRs & Remedials Portsmouth Area Full-Time / Self-Employed Considered Competitive Rates Depending on Experience We are looking for a reliable and experienced electrician to join our growing team carrying out commercial electrical works across Portsmouth and surrounding areas. The Role You will be involved in: • Commercial electrical installations and maintenance, • Carrying out EICRs (Electrical Installation Condition Reports), • Completing remedial works following inspections, • Fault finding and testing, • Working across a range of commercial properties Requirements, • NVQ Level 3 in Electrical Installation, • 18th Edition Qualification, • Testing & Inspection qualification (2391 or equivalent preferred), • Experience with commercial projects and EICRs, • Full UK driving licence preferred, • Ability to work independently and professionally What We Offer, • Consistent ongoing work, • Up to £250 / day, • Opportunity to grow with the business, • Friendly and professional working environment If youre a motivated electrician with experience in commercial works, testing, and remedials, wed like to hear from you. AMRT1_UKTJ ...

Quality Inspector - Production & Equipment Location: Portsmouth Salary: Competitive, negotiable depending on experience Job Type: Ongoing contract Quality Inspector - Production & Equipment Location: Portsmouth Salary: Competitive, negotiable depending on experience Job Type: Ongoing contract The Role An exciting opportunity has arisen for a Quality Inspector to join a highly skilled quality team supporting advanced production operations. This role focuses on ensuring high standards across cleanroom manufacturing and testing processes, working on complex and precision-built equipment. You will play a key role in maintaining compliance with defined quality standards, supporting inspection activities, and promoting a strong quality-first culture across production environments. Key Responsibilities • Ensure compliance of production and testing activities with established quality standards and procedures, • Perform inspection and validation activities to confirm products meet design and build requirements, • Conduct Key Inspection Points (KIPs) and support critical inspection processes, • Identify and record non-conformities, supporting root cause analysis and corrective actions, • Perform internal audits and documentation checks within cleanroom operations, • Support testing readiness, critical movements, and final product p...

Our engineering and manufacturing clients based close to Havant have an exciting opportunity for a Quality Engineer to join their growing team. Responsibilities To carry out all inspections such as first off, last off, incoming, and outgoing goods, of detailed parts, assemblies and documentation in a timely and efficient manner, using mechanical or electronic measuring equipment. Responsible for verifying components meet specification and customer requirements using detailed drawings, the customer’s condition of supply, company procedures and layouts. Final release of parts to customer including raising and signing certificates of conformity. Action and complete First and Last Article Inspection reports as per customer requirements. Responsible for the non – conformance process. Interface with customers, suppliers and personnel on quality requirements and non-conformances. This includes reporting all component and documentation non-conformances using the appropriate documents and forms to the relevant Team Leader and Supervisor. Non-Conformance control reports including Root cause analysis, correction, corrective, and verification of completed actions. Carry out internal audits against the relevant standard/ certification held. Good understanding of documentation control and management in accordance with AS9100 Represent quality at the Tier meetings to provide feedback and suppor...

CNC Machinist Required! Our client is a specialist engineering and manufacturing business supplying precision components to various industries. On behalf of our client, we are looking to recruit an experienced CNC Milling Machinist. The successful candidate will focus on milling precision components, using greatest care and professional knowhow. Package: £17-£18 per hour (dependent on experience) 1.5x for overtime 20 days' holiday plus bank holidays, increasing with tenure Birthday off to celebrate you Monday - Friday, 40 hours per week & flexitime options Branded workwear provided Employee mentoring and development opportunitiesCNC Machinist - Responsibilities: Program, set up, and operate CNC mills with precision and care Operate manual mills as required Use inspection and measurement equipment to verify components Read and interpret technical drawings accurately Apply strong mathematical skills for measurements and calculations Troubleshoot and solve problems proactively Contribute ideas to improve processes, efficiency, and qualityCNC Machinist - Requirements: 5+ years' experience operating CNC mills (Hurco experience advantageous) Proficiency in manual milling Strong attention to detail and commitment to quality Ability to read and interpret technical drawings Strong numeracy and problem-solving skills Self-motivated, reliable, and able to work independently Experience with CNC or manual ...

A leading precision engineering company in Havant is seeking an experienced Quality Inspector to join its established team. Operating a modern facility with 22 CNC mills and lathes running on Heidenhain, Haas and Siemens controls, the business employs 18 skilled operatives and delivers high‑accuracy components across demanding sectors. Role Overview Reporting to the Quality Manager, you will play a key role in maintaining and improving product quality across the machining operation. The position involves routine mechanical inspection and visual inspection of components (pre‑ and post‑treatment), ensuring compliance with customer, internal and industry standards. Key Responsibilities Conduct routine inspections using mechanical tools and CMM equipment Prepare quality documentation including FAIRs, SCARs and NCRs Work within established quality procedures and support AS9100‑aligned processes Review and verify material certifications Monitor, record and report non‑conformances Participate in NQA and internal audits Support and guide CNC operatives to ensure quality standards are consistently upheld Hours & Benefits Monday to Friday – 37 hours, early finish Friday at 12:30 20 days holiday, increasing by 1 day per year to a maximum of 25 Statutory pension On‑site parking Overtime available at premium rates Candidate Profile We are looking for a proactive, ...

Contek Recruitment are currently recruiting for a Quality Inspector to join a precision engineering client of ours, based in the Havant area of Hampshire. The company is a precision engineering company specialising in the subcontract manufacture of high-accuracy components and assemblies for demanding industries such as aerospace, oil & gas, and underwater sectors. They operate to the highest quality standards, working within an AS9100-compliant quality management system to deliver robust components on time and with exceptional precision. Role Overview We are seeking a full-time Quality Inspector to support our busy operations in a fast-paced precision manufacturing environment. You will play a key role in ensuring product quality and delivering the correct documentation required by our customers. Key Responsibilities Perform routine mechanical and visual inspection of parts (pre- and post-treatment), including first-off inspections. Inspect using manual measuring methods and Coordinate Measuring Machine (CMM) where required. Prepare and issue customer-required paperwork, including FAIRs (First Article Inspection Reports), SCARs, NCRs and other documentation as specified. Submit quality documentation through customer portals accurately and on time. Review and check material certifications and ensure compliance with requirements. Monitor and record rejects/non-conformances and raise issues as need...

Job Title: Experienced CNC Miller (Programmer / Setter / Operator)Location: HavantJob Type: Full-time, Permanent About the RoleAn established specialist engineering and manufacturing business is seeking an experienced CNC Miller to join its growing manufacturing team. The company supplies precision components to a broad range of industries including packaging, converting and print.This is an exciting opportunity to join the business during a period of sustained growth and operational development. The organisation is investing in modern systems, strengthening internal processes, and building a high-performing team to support ambitious expansion plans.The successful candidate will play a key role in producing high-quality precision components while supporting the company's focus on quality, reliability and continuous improvement. Key Responsibilities Programme, set and operate CNC milling machines (Hurco VM2 and Hurco 60). Manufacture precision components to engineering drawings and specifications. Operate manual milling machines where required. Use inspection equipment to ensure components meet required tolerances and quality standards. Accurately record job timings using the company ERP system (implementation in progress). Work collaboratively with CNC and manual lathe teams, as well as the design and engineering department. Report directly to the General Manager. Skills & ExperienceEssential: Minimum 5 years' experience in ...

Role Purpose The Radar Repair Technician is responsible for the inspection, fault diagnosis, repair, testing and certification of radar electronic Line Replaceable Units (LRUs) down to component level. The role supports the availability of radar spares across the CLS contract and provides engineering support to remote radar sites to ensure contractual KPIs, quality and safety obligations are met. Key Responsibilities Inspect, fault-find and repair failed radar LRUs down to component level (3rd/4th line support). Reverse engineer complex electronic units where documentation or support is limited. Test, certify and release repaired units to ensure safety, compliance and quality standards are met. Source obsolete or ageing electronic components using approved online and specialist suppliers. Maintain responsibility for workshop safety, quality compliance and continuous improvement activities. Maintain, manage and calibrate all tools and test equipment required to support the electronics workshop. Package, track and distribute repaired LRUs to remote radar sites. Provide engineering support to Remote Radar Head (RRH) sites, including radar modifications and installation tasks when required. Assist with spares management and the movement of LRUs between workshop and remote sites. Work closely with Logistics, RRH Site Managers and System Managers to ensure effective service delivery. Reason for the Role Maintain sufficient levels o...

Are you an experienced Quality Inspector with strong CMM programming experience looking for your next opportunity within precision manufacturing? Do you enjoy working in a quality-focused environment where attention to detail, problem solving and technical inspection skills are highly valued? Were supporting a specialist manufacturing business who are looking to recruit a Quality Inspector to join their quality team. Whats the role all about? As a Quality Inspector, youll play a key role in ensuring products meet strict quality standards and customer specifications across the manufacturing process. This is a hands-on role involving detailed inspection activities, measurement reporting and close collaboration with production and engineering teams. A key part of this role is the ability to programme and operate CMM equipment, making previous CMM programming experience essential. Key responsibilities • Carry out first-off, in-process and final inspections on precision manufactured components, • Programme and operate CMM equipment to verify dimensional accuracy, • Use a range of manual inspection equipment including micrometres, verniers and gauges, • Read and interpret technical engineering drawings and GD&T, • Identify non-conformances...

Are you an experienced CNC Turner with strong Fanuc or Mazak experience looking for your next opportunity within precision engineering? Do you enjoy programming, setting and operating CNC machinery while producing high-quality precision components? Were supporting a specialist manufacturing business who are looking to recruit a CNC Turner to join their operations team. Whats the role all about? As a CNC Turner, youll be responsible for programming, setting and operating CNC lathes to manufacture high-precision components to exact specifications. This is a hands-on role within a fast-paced precision engineering environment where quality, accuracy and attention to detail are critical. Youll work closely with engineering and production teams to ensure products are manufactured efficiently and to the highest standards. Key responsibilities • Programme, set and operate CNC Fanuc and/or Mazak Lathes, • Write and optimise CNC programs from engineering drawings and specifications, • Set up machines including tooling, fixtures and raw materials, • Prove out new programs and ensure successful machine operation, • Manufacture precision components to tight tolerances, • Carry out in-process inspection using precision measuring equipment, • Troubleshoot machining and programming issues, • Mainta...