Inspection jobs in HayesCreate job alerts

e are proud to working alongside our client, a well-established national organisation with their search for an HGV Technician to be based at the prestigious site in Uxbridge What does the role involve? • Carry out inspection, service, maintenance and repair of range of vehicles within the fleet, • Diagnostic and rectification work on faults on HGV Vehicles, • Carrying out MOT preparation work with the vehicle... ZIPC1_UKTJ

There’s a permanent opportunity for you here as a Shift Engineer to join our team on our one of our data centre contracts in Hayes, West London The Role • Receive electronically PPM instructions from Aurora and undertake all maintenance tasks following the designated instructions., • Ensure all maintenance consumables are available and arrange replenishment of all items to ensure agreed stock levels are established., • Complete all electronic and paper records such that an accurate Site Logbook record of all works remains on site for the Client’s information and approval., • Be able to undertake any diagnostic analysis that the whole system may require., • Undertake a visual condition inspection of all installed equipment and submit a written report of any items that appear to jeopardise any aspects of reliability., • Enter into dialogue with the Client’s representative to ensure there are no outstanding issues and also to ensure the overall quality of service delivery., • Carry out general maintenance and good housekeeping practices and plant room cleaning to ensure that the life expectancy of all installed equipment is maximised., • Participate in Health & Safety Codes of Safe Working and other Environmental issues to ensure total compliance with Dalkia’s Health, Safety and Environmental Policy. Report any omissions or risks that might compromise a Safe Working Environment., • If the appropriate report on the performance of any sub-contracted works is required. Attend to all reasonable emergency call-out requests as speedily as possible and maintain good communications with the Client regarding the progress of all outstanding works., • Make recommendations to the Contract Management on matters concerning continuous improvement and “adding value” that may improve the productivity, costs, quality of service delivery, etc. of all work for which the Company has a responsibility., • Complete all Dalkia maintenance tasks as generated by Dalkia Contract Support/Helpdesk, • Complete any breakdowns as and when necessary., • Ensure plant areas Dalkia is responsible for are always clean and tidy., • Assume the role of HV AP for the site., • Respond to clients' requests promptly., • Maintain all site records and logbooks., • Please note that this is not an exhaustive list, and you may be required to assist the Business with other duties as appropriate. Hours of Work • Continental Shift Pattern – 12 hours shifts, day and nights Benefits • Additional earnings available through overtime - if wanted, • 21 days annual leave plus Bank Holidays, plus option to purchase an additional 5 days leave every year, • Pension with matched contributions between 6-8%, • Life Assurance, • Private Medical Insurance Single Cover on completion of 12 month' service, with the opportunity to pay for additional cover for partner/dependants, • Flexible Benefits Scheme – including eye care voucher, store discounts for major retailers, salary sacrifice electric car vehicle lease scheme, personal IT equipment loans, impartial financial/savings guidance, • Access to wellbeing programmes, • Company Sick Pay, • Employee recognition programmes which reward exceptional achievements, • Employee Referral bonus with generous bonuses for ‘referring a friend’, • The opportunity to use one working day per year volunteering to help the local community, • Employee Assistance Programme - free, confidential 24/7 365 support on all lifestyle matters, • Smartphone/ Tablet, uniform, PPE Career Progression Route • From this role you could progress into a Supervisor position if desired Experience Required • Experience as an Electrical Engineer in a data centre, critical environment, commercial building, industrial plant, • or similar technical setting., • Hands-on experience working with electrical distribution systems, UPS systems, generators, switchgear,, • lighting circuits and associated control panels., • Experience carrying out PPM and reactive maintenance on M&E plant and building services equipment., • Familiarity with critical systems monitoring, including responding to alarms, reporting events and initiating, • escalation procedures., • Experience working within permit-to-work and safe-system-of-work environments, including isolations and lock-off procedures., • Previous work in shift-based operations, ideally within a 24/7 environment., • Experience supporting or overseeing subcontractors undertaking technical work on electrical and mechanical systems., • Experience using CAFM/CMMS systems for work order management, asset updates and shift reports (desirable)., • Exposure to resilience-based engineering such as N+1, dual-path systems and high-availability operations (advantageous) Qualifications • Time-served apprenticeship or equivalent in Electrical Engineering (essential)., • City & Guilds / NVQ Level 3 in Electrical Installation, Electrical Engineering or a related discipline (essential)., • 18th Edition Wiring Regulations (BS 7671) (essential)., • 2391 or equivalent qualifications in Inspection & Testing (desirable)., • HV Authorised Person training or experience working around HV systems (desirable)., • Mechanical / multi-skilled training (advantageous for supporting M&E plant)., • First Aid at Work, Manual Handling, Permit-to-Work, and Health & Safety training (desirable; but will be, • provided)., • Data centre–specific or critical environment training (e.g., DC operations, UPS/generator courses), • advantageous but not essential We’re committed to treating all our job applicants fairly and with respect. If you need adjustments, we're happy to discuss that with you. Please contact our talent acquisition team in confidence.

Manufacturing Engineer - ✈️ 🗺️ Hayes, Middlesex 💰 £32,000 to £34,000 + Package 📅 Start ASAP Launch Your Engineering Career in Advanced Manufacturing We are currently working with a leading aerospace MRO to recruit a Manufacturing Engineer with 1 to 2 years of experience. This is an excellent opportunity for an early career engineer to develop within a high performance, regulated production environment. The successful candidate will join a technical team supporting plating and surface finishing operations, playing a key role in improving shop floor processes, developing documentation and supporting continuous improvement initiatives. The Role As a Manufacturing Engineer, you will: • Create and maintain clear and practical manufacturing work instructions and tooling documentation for shop floor use, • Define critical checks and inspection requirements to support production, • Assist in investigating and resolving production defects and non conformities, • Contribute to continuous improvement initiatives to reduce waste and improve throughput, • Analyse production data including cycle times, downtime and machine availability, • Conduct time and motion studies, workflow analysis and process mapping, • Support structured problem solving activities alongside senior engineers, • Develop and maintain tooling and equipment master data within an ERP system, • Coordinate with maintenance teams to ensure equipment uptime, • Collaborate with Operations, Tooling, Supply Chain, IT and Maintenance teams, • Support automation and digital improvement initiatives to enhance manufacturing performance, • Ensure full compliance with Environmental, Health and Safety procedures, • This is a hands on role combining office based engineering responsibilities with regular time spent supporting shop floor operations within a plating environment. The Candidate Our client is particularly interested in individuals with 1 to 2 years of experience in a manufacturing engineering, production engineering or tooling support role who are keen to continue developing their career. Essential • HND in Mechanical Engineering or a related discipline, • 1 to 2 years of experience within a manufacturing or production environment, • Experience creating or updating manufacturing work instructions or technical documentation, • Ability to read and interpret engineering drawings, • Basic metrology knowledge, • Strong analytical and problem solving skills, • Good working knowledge of Microsoft Office, • Experience using CAD software, SolidWorks preferred, • Ability to communicate effectively with both shop floor personnel and technical teams, • Right to live and work in the UK without restriction Desirable • Experience in metal component manufacturing or surface finishing processes, • Exposure to aerospace manufacturing standards, • Familiarity with MRP or ERP systems, SAP desirable, • Lean Manufacturing or Continuous Improvement training, • Understanding of Statistical Process Control Personal Attributes • Curious and proactive with a genuine interest in improving manufacturing processes, • Detail focused with a practical approach to problem solving, • Comfortable working within a matrix team environment, • Well organised and able to manage multiple priorities, • Motivated to develop technically and professionally Working Environment The role is primarily office based but involves regular time within a plating shop environment. The successful candidate will be working around industrial equipment and chemical processes, with full training and appropriate protective equipment provided. Flexibility is required in line with business needs, including potential shift support, evenings, weekends or occasional travel during key project phases. This is a strong opportunity for a motivated early career engineer to gain exposure to advanced aerospace manufacturing processes and contribute to meaningful continuous improvement projects. If you are looking to take the next step in your manufacturing engineering career, we would welcome your application.

Role: Deputy Manager Location: West Drayton Salary: Up to £32,000 About the Company KiddyKare are looking for a Room-based Deputy Manager within the West Drayton area. The nursery is situated around libraries, children's centres and parks which they explore with the children each week. The nursery has a very large garden which they like to use for planting herbs and bird watching. This nursery also like to do what they can for charities by raising money for GOSH, hosting Macmillan coffee mornings, red nose day/sport relief activities and the shoe box charity during Christmas. About the Role With a salary of up to £32,000 and potential occupancy bonus (paid termly) 40 hours per week over 5 days. Other incentives include: • Star employee reward voucher scheme, • 50% childcare discount for all staff, • Colleague referral scheme, • Child referral scheme, • Ofsted inspection bonuses for good or outstanding outcomes, • Birthday Gift, • 100% attendance rewards yearly, • Service loyalty rewards, • Company social events, • Staff training events, • Company training program Responsibilities • To work alongside the manager and deputise for her in her absence., • To support the aims and objectives of the nursery and assist the manager in the organisation of a high-quality establishment for children from 2 to 5 years., • To lead a team of professional workers and to always ensure good practice., • To assist with the planning and organisation of staffing schedules and holiday rotas to ensure adequate staffing levels are maintained in accordance with Local Authority guidelines and nursery procedures., • To assist with staff development and training., • To be flexible and work and assist other sister nurseries in the event of managerial absences to ensure the care and safety of all the children throughout the nurseries. Qualifications • A full and relevant childcare Qualification of L3 and above, • Experience of managing a team - i.e. as a room leader or third in charge for at least 2 years, • 5 years Nursery experience Required Skills To apply for this role, you must have: • A full and relevant childcare Qualification of L3 and above, • Experience of managing a team - i.e. as a room leader or third in charge for at least 2 years, • 5 years Nursery experience

We are seeking an experienced and motivated Registered Manager to lead a new children’s residential care home in North West London. This is an opportunity to take full operational responsibility for a home supporting young people with emotional and behavioural needs, ensuring high-quality care delivery in line with regulatory standards and best practice. The successful candidate will demonstrate strong leadership capability, sound knowledge of safeguarding frameworks, and a proven track record of achieving positive outcomes for children and young people. Key Responsibilities • Register with Ofsted as the Registered Manager and maintain full compliance with regulatory requirements., • Provide effective leadership, supervision, and performance management to the staff team., • Ensure the home operates in accordance with the Children’s Homes Regulations and Quality Standards., • Promote a therapeutic, child-centred culture that prioritises safeguarding and wellbeing., • Oversee care planning, risk assessments, and placement matching., • Manage budgets, resources, and occupancy levels effectively., • Develop and maintain strong partnerships with local authorities, families, and external professionals., • Lead inspections and implement continuous improvement strategies to achieve positive inspection outcomes. Essential Requirements • Level 5 Diploma in Leadership and Management for Residential Childcare (or equivalent), • Minimum 2 years’ experience in a management role within a children’s residential setting, • Strong working knowledge of safeguarding legislation and regulatory frameworks, • Experience managing Ofsted inspections, • Demonstrable leadership and staff development skills, • Full UK driving licence Desirable • Experience supporting young people with EBD (Emotional and Behavioural Difficulties), • Proven record of achieving “Good” or “Outstanding” inspection outcomes, • Therapeutic or trauma-informed practice training Personal Attributes • Resilient and emotionally intelligent, • Strong decision-making and problem-solving skills, • High level of professional integrity, • Ability to balance compliance, care quality, and commercial performance What We Offer • Competitive salary package, • Performance-related bonus, • Ongoing professional development, • Supportive senior leadership structure, • 28 days annual leave (inclusive of bank holidays), • Pension scheme Safeguarding Statement We are committed to safeguarding and promoting the welfare of children and young people. The successful candidate will be subject to an enhanced DBS check and satisfactory references. If you are a dedicated leader passionate about improving the lives of vulnerable young people and ready to take the next step in your career, we would welcome your application

We are seeking an experienced and motivated Registered Manager to lead a new children’s residential care home in North West London. This is an opportunity to take full operational responsibility for a home supporting young people with emotional and behavioural needs, ensuring high-quality care delivery in line with regulatory standards and best practice. The successful candidate will demonstrate strong leadership capability, sound knowledge of safeguarding frameworks, and a proven track record of achieving positive outcomes for children and young people. Key Responsibilities • Register with Ofsted as the Registered Manager and maintain full compliance with regulatory requirements., • Provide effective leadership, supervision, and performance management to the staff team., • Ensure the home operates in accordance with the Children’s Homes Regulations and Quality Standards., • Promote a therapeutic, child-centred culture that prioritises safeguarding and wellbeing., • Oversee care planning, risk assessments, and placement matching., • Manage budgets, resources, and occupancy levels effectively., • Develop and maintain strong partnerships with local authorities, families, and external professionals., • Lead inspections and implement continuous improvement strategies to achieve positive inspection outcomes. Essential Requirements • Level 5 Diploma in Leadership and Management for Residential Childcare (or equivalent), • Minimum 2 years’ experience in a management role within a children’s residential setting, • Strong working knowledge of safeguarding legislation and regulatory frameworks, • Experience managing Ofsted inspections, • Demonstrable leadership and staff development skills, • Full UK driving licence Desirable • Experience supporting young people with EBD (Emotional and Behavioural Difficulties), • Proven record of achieving “Good” or “Outstanding” inspection outcomes, • Therapeutic or trauma-informed practice training Personal Attributes • Resilient and emotionally intelligent, • Strong decision-making and problem-solving skills, • High level of professional integrity, • Ability to balance compliance, care quality, and commercial performance What We Offer • Competitive salary package, • Performance-related bonus, • Ongoing professional development, • Supportive senior leadership structure, • 28 days annual leave (inclusive of bank holidays), • Pension scheme Safeguarding Statement We are committed to safeguarding and promoting the welfare of children and young people. The successful candidate will be subject to an enhanced DBS check and satisfactory references. If you are a dedicated leader passionate about improving the lives of vulnerable young people and ready to take the next step in your career, we would welcome your application

Principal Network Compliance Officer needed in Harrow, £17.To be responsible for day to day inspection and enforcement regimes for New Roads and Street works Act, Highways Act and highways safety inspections and report on conditions and bring about improvements.Take action as appropriate including

Inspection Technician Location: Uxbridge, Middlesex Salary: £35,000 per annum Hours: 37 hours per week Benefits: 25 days holiday + bank holidays, 9% non-contributory pension, early Friday finish We are recruiting for an experienced Inspection Technician to join a highly regulated aerospace m

Electrician (Test and Inspection). A fantastic opportunity has arisen for an Electrician to work for an internationally renowned engineering solutions provider based around the Hayes area. Skills required for the job Electrician (Test and Inspection).

They operate within a quality-driven, AS9100-compliant environment and are looking to strengthen their inspection and quality team. We are seeking a Quality Engineer with strong CMM inspection experience. The successful candidate will primarily operate CMM equipment while supporting wider quality en

NDT Technician Level 2 (Eddy Current Testing Required)Aviation MRO EnvironmentOur client is seeking an experienced NDT Technician Level 2 to join a fast-paced aerospace MRO operation, supporting the inspection and evaluation of aircraft components, including landing gear. This role requires a certif

Camio (2022) Focus (2021) Execute pre-written CMM programs and perform dimensional inspections Interpret and inspect components in line with engineering drawings and GD&T requirements Produce and review inspection reports Identify and manage non-conformances Support root cause investigations a

The Service Technician is responsible for the inspection, repair, and servicing of a wide ra. If you have a strong technical background, a passion for problem-solving, and are committed to delivering excellent customer service, we want to hear from you!.

Electrical Tester A fantastic opportunity has arisen for an Electrical Tester to work for an internationally renowned engineering solutions provider based around the Hayes area. Must have an electrical qualification * Must have a Test and inspection certificate – 2391 Company benefits &nd

For the Highways Inspector role, we require an individual with previous surveying/inspection experience in the field, someone who has a great eye for detail, capable of writing detailed reports, and following H&S. Are you passionate about shaping your local streets? Do you thrive in dynamic environm

As an Electrical Service Engineer, you will be responsible for the maintenance, inspection, testing and fault-finding of LV and HV switchgear and associated power distribution equipment. The role is primarily site-based, combining hands-on technical work with direct customer interaction. This positi

We are currently recruiting for an Inspector in the Inspection department at our clients Denham site where you'll undertake a variety of processes for product verification of parts and components on a shift basis.Aspects of the role include to: Carry out testing/inspection of components using a

Key Responsibilities ·Lead the inspection, maintenance, and improvement of highway infrastructure in your area. Enforce standards under the Highways Act 1980 and Environmental Protection Act 1990. Highway Inspector Location: Hounslow Salary: £35,000 - £40,000 Full-time | 40 Ho

Quality Inspector Denham | £34,000 - £38,000 | Permanent | Days We're recruiting a Quality Inspector for a globally recognised aerospace manufacturer in Denham. You'll be carrying out precision inspection of components for aviation safety systems used in fighter jets, using a r

Join us on this mission as an Assembly Operative working in our Fitting Shop at our Denham site.You'll be undertaking a variety of processes including the assembly and inspection operations to produce and test cables, pipes, high pressure hoses and gun components as part of seat assembly that wi

Maintenance Electrician Wembley. All potential candidates should read through the following details of this job with care before making an application. My client is currently recruiting for a maintenance electrician,youwill have your electrical qualifications AM2/NVQ3 or apprenticeship trained with your test and inspection, as well as a background in commercial maintenance. Sector: High End Commercial Landlord. xrnqpay Duties will include all ppm and reactive maintenance on the landlord and energy side. From basic fault find...

A leading aerospace manufacturing company in Denham is looking for an experienced NDT Level 2 Technician to join their Inspection team.

Testing and Inspection Electrician. They’re offering a clear route of progression into supervisory roles for Test and Inspection Electricians. Electrician - Test & Inspection.

A leading aerospace engineering firm in the UK seeks an Assembly Operative to join their team in Denham.The role involves the assembly and inspection of cables and components critical to the production of life-saving ejection seats.Candidates should have a basic manufacturing background and experien

A leading British engineering firm in Denham is seeking a Mechanical Inspector to join their Despatch Inspection department.The role involves testing components and ensuring product verification using various techniques.The ideal candidate will have strong numeracy and geometry skills, experience wi

A recruitment agency is seeking an experienced Inspection Technician for a regulated aerospace manufacturing company in Uxbridge. The role involves inspecting precision-engineered components and requires proven skills in using hand-held inspection tools, interpretation of engineering drawings, and m

You’ll be responsible for sourcing and purchasing indirect materials and services, supporting Environmental Test, Seat Test, Programmes and Inspection functions. You'll support colleagues across several functions including Environmental Test, Seat Test, Inspection, Programmes, Engineering Metrolog

We have a longstanding inspection contract with Bristol City Council where we typically deliver 1500-2000 inspections per year.We are currently looking for additional assistance to deliver c200 premises before the end of March.The contract will continue through 2026-27 for those interested in long t

We have a longstanding inspection contract with Bristol City Council where we typically deliver 1500-2000 inspections per year.We are currently looking for additional assistance to deliver c200 premises before the end of March.The contract will continue through 2026-27 for those interested in long t

A leading aerospace manufacturer in Denham is looking for a Parachute Packer to join their stable, long-term workforce.This permanent position offers a salary of £28,000 per annum and demands precision in packing and inspecting parachutes and drogues used in aviation safety systems.Candidates shoul

Ensure clinical project audit and inspection readiness through the study lifecycle.

A family-run electrical contracting business in the UK is hiring for the entry-level role of Testing and Inspection Electrician.

This role involves training in the machining and inspection of components for ejection seats, contributing to aircrew safety.

We are currently seeking an experienced HIAB Driverto fill a positionin and the London area. UKDriving Licence Reliable and a good timekeeper Experience of operating a HIAB loader in safe manner HIAB Ticket Expectations: Confident Class 2 driver Able to perform a complete pre and post-operation inspection of the vehicle as required by company policy checking tyre pressure, fluid levels, safety equipment, gauges and controls are in good working order. Able to report any safety issues on standard reports Able to follow instructions and the delivery schedule and confident to interact with dispatchers to complete the job to a high standard Follow all required safety policies and procedures Pay rates £19PAYE £24 UMBRELLA MIN 10HRS About Us IDrive Recruitment are one of the UK's fastest growing Driving and Industrial Sector Recruitment Agencies in the UK. We are currently working with some of Sussex'sleading companies and have a range of driving roles available on an ongoing basis. TPBN1_UKTJ

Sous Chef - Allianz Stadium, Twickenham £44,000 per annum, plus benefits At Levy, we're proud to be the official catering partner of Allianz Stadium, managing all food and beverage services from public concessions to premium hospitality suites. Known for high-end, sustainable, and locally-sourced menus, Levy offers everything from quick match-day food and drink to fine dining experiences for members and corporate events. We emphasize sustainability through initiatives like reducing single-use plastics, using seasonal British produce, and minimizing food waste, enhancing the stadium experience year-round. About the role: As Sous Chef at Allianz Stadium, you will play a key leadership role within the kitchen team, supporting the Head Chef in delivering exceptional culinary experiences across a range of events - from match days and banquets to high-profile corporate functions. You will be responsible for maintaining the highest standards of food quality, presentation, and hygiene while helping to inspire, train, and motivate the brigade. Working in a dynamic, fast-paced environment, you will contribute to menu development, manage kitchen operations in the Head Chef's absence, and ensure that all culinary outputs reflect Allianz Stadium's reputation for excellence. Sous Chef Duties: Create standout food • Prepare fresh, high-quality dishes that wow our guests and bring our menus to life Drive kitchen excellence • Spot opportunities to improve food quality, service flow, and ways of working Lead by example • Help build a positive, inclusive kitchen culture where your team feel supported, motivated, and proud of what they produce Deliver exciting food concepts • Support the brigade in consistently executing our menus to brand standards Champion the brand • Be an ambassador on site, representing our values through professionalism, passion, and plate presentation Own stock & waste control • Support ordering, stock management, and food waste reduction to maximise efficiency and margins Maintain immaculate standards • Oversee cleaning routines and hygiene practices to keep the kitchen inspection-ready at all times Support financial performance • Assist with budget control and hitting key financial targets Sous Chef Requirements: Exceptional Communication & Interpersonal Skills: Foster clear and effective communication within the kitchen and with all team members to ensure smooth operations and a positive work environment. Meticulous Attention to Detail: Demonstrate an unwavering commitment to quality and precision in every dish, elevating the overall guest experience with every plate served. Building Strong Relationships: Cultivate strong, respectful, and collaborative relationships with colleagues, suppliers, and guests. Deliver a service that not only meets but exceeds expectations, creating lasting impressions and fostering team cohesion. Adaptability & Flexibility: Thrive in dynamic environments, quickly responding to changes with a proactive mindset. Embrace new challenges and continuously seek ways to innovate and improve. Integrity & Accountability: Uphold the highest standards of personal and professional ethics. Be a role model in honesty, responsibility, and reliability, taking ownership of actions and outcomes. Leadership & Development: Exhibit a natural ability to lead, inspire, and support a diverse team. Take initiative in developing new skills and expanding your expertise to grow with the business. Client-Focused Approach: Skillfully identify and clarify customer requirements, ensuring that every dish meets their expectations while maintaining the restaurant's vision and standards. Time Management & Deadline Oriented: Manage multiple tasks efficiently, meeting deadlines and maintaining high standards even under pressure. Sous Chef Benefits: Healthcare & Wellbeing • Medicash health benefits (including dental, mental health & optical for you and up to 4 children), free annual health check with Aviva Digicare, discounts at Nuffield Health & Pure Gym, and access to our Employee Assistance Programme. Exclusive Perks & Discounts, • Save on entertainment (up to 55% off cinema tickets), shopping (up to 15% off), Vodafone plans, and travel with top providers such as TUI & Expedia. Workplace Benefits, • Meals on duty, pension scheme, life assurance, and professional subscriptions paid. Leave & Family Support, • 23 days + bank holidays, your birthday off, extra leave after maternity return, a day off for your baby's 1st birthday, and a holiday purchase scheme. Career & Financial Support, • Ongoing training & development, career pathways, financial wellbeing programme, and preferred rates on salary finance products. Who are Levy? Levy, part of Compass Group, known for delivering exceptional food, drink, and hospitality experiences at world-renowned venues such as Wimbledon, Twickenham, and Tottenham Hotspur. Focused on sustainability, diversity, and inclusion, Levy prides itself on using sustainably sourced ingredients and providing outstanding service. The company is committed to achieving Net Zero by 2027, partnering with the British Paralympic Association, and ensuring all team members earn at least the Real Living Wage or London Living Wage. Why Join Us? At Levy UK & Ireland, we celebrate diversity and foster inclusion, valuing every individual's unique strengths. Our diverse team fuels creativity, innovation, and success. We promote fairness, ensure all voices are heard, and provide equal opportunities for all. We welcome candidates from all backgrounds to join us in creating a supportive, equitable workplace where everyone can thrive and contribute. Together, we achieve greatness. TPBN1_UKCT

The Inspector will be responsible for carrying out detailed inspections of aircraft landing gear components and accurately recording component condition within the company SAP system. The role involves developing cost-effective repair and overhaul route sheets in accordance with approved OEM Component Maintenance Manuals (CMMs) and Standard Operating Procedures Manuals (SOPMs), while supporting production targets and quality standards. This is a shift-based role Monday to Friday Duties and Responsibilities Perform detailed inspections of aircraft components using approved inspection criteria, techniques, and calibrated inspection equipment. Identify component condition and determine appropriate repair or overhaul requirements in accordance with OEM CMMs and company procedures. Create, amend, and maintain component overhaul and repair routes within the SAP system. Accurately record all component data, including Part Number (P/N), Serial Number (S/N), and condition, within the Shop Repair Order and SAP system. Carry out dimensional inspections and precise measurements as required to support inspection workload. Work in accordance with production priority lists, including ASPEN schedules and milestone dates provided by Production Control. Liaise with Technical Engineering, Production, and other departments to resolve inspection and repair-related queries. Support continuous improvement by participating in daily departmental dialogue and communication meetings. Promote and ensure compliance with all relevant health and safety legislation, company policies, and codes of practice. Maintain awareness of the Major Accident Prevention Plan (MAPP) and associated responsibilities. Demonstrate understanding of, and compliance with, the companys environmental policies and procedures. Ensure all duties are carried out in full compliance with Safety, Environmental Regulations, and Company Procedures. Education and Qualifications Completion of an aerospace apprenticeship is desirable. A recognised qualification in an engineering discipline is desirable. Experience and Knowledge Previous experience within an aerospace engineering or equivalent regulated environment. Proven background in mechanical component inspection. Experience working with SAP or similar ERP systems is advantageous. Strong knowledge of inspection techniques, standards, and inspection equipment. Practical experience using imperial measuring tools, including micrometres, callipers, and other precision measuring instruments. Our Benefits We offer a wide range of benefits designed to support your wellbeing, lifestyle, and career, including: Flight discounts and reduced travel rates Purchase and selling of annual leave Generous paid paternity and maternity leave One wellbeing day per year , dedicated to supporting your mental and physical wellbeing Discounts on hotels, retail, and leisure activities Employer pension contributions Reduced gym memberships to support a healthy lifestyle Company events and organised sporting groups to encourage connection and wellbeing In addition, our facility is within walking distance of the Elizabeth Line , making commuting quick, easy, and seamless from across London and beyond. TPBN1_UKTJ

Class 2 Driver Savanna Staff Solutions are urgently recruiting for a Class 2 driver for our film & TV production client Colnbrook SL3 postcode Our client is an industry leader in lighting equipment and generator hire to the film and tv production industry and are offering ongoing work throughout the year following a successful asessment/induction Your (very easy) daily class 2 Driver day will consist of the following: Pre and post journey vehicle inspection using the RHA mobile app Collection and delivery of lighting equipment to various sites around the UK Backing onto bays with the help of a banksman Impeccable driving standards at all times This class 2 driver work is ideal for someone looking for a much slower pace of work. Please only apply if you have settlement status already and have the following: UK Driving Licence Category C (class 2 HGV) at last one year with some on the road experience (insurance purposes) Current DQC CPC and DIGI Card with good knowledge of road legislation and driving hours Good communication skills in English Our client is asking for Class 2 drivers for assessmnts now, these take place every Tuesday around midday and will last for 3 hours minimum after whoch you are offered ongoin work Please hit “Apply now” below and one of the team will be in touch ASAP to begin the registration process Savanna staff Solutions – leading the way in technology-based recruitment techniques TPBN1_UKTJ

Toolmaker Location: Middlesex Salary: £40,000-£45,000 per annum Term: Permanent Overview An opportunity has arisen for a skilled and motivated Toolmaker to play a key role within a forward-thinking and innovative organization. This position offers the chance to work in a dynamic and collaborative environment, contributing to high-quality production processes. Responsibilities As a Toolmaker, your duties will include: Planning and executing work to meet production schedules and deadlines. Manufacturing tools based on design specifications and standards. Using precision tools such as micrometres, verniers, and gauges. Repairing, maintaining, and enhancing mould and press tooling. Conducting evaluations of repair jobs to ensure tools meet operational standards. Operating manual machinery, such as mills, lathes, grinders, and EDM sinkers. Performing benchwork and keeping tooling systems in good working condition. Adhering to Health and Safety regulations. Reporting any equipment issues to the line manager for resolution. Qualifications The ideal candidate should possess the following qualifications and skills: Relevant engineering qualification or a time-served apprenticeship. Current Abrasive Wheels Regulations certification. Familiarity with hot runner systems, unscrewing mould tools, and progression strip tools. Laser welding experience (desirable but not mandatory). Proficiency in Microsoft Office and computer literacy for operational duties. A strong mechanical aptitude, coupled with a proactive mindset towards learning and skills development. Day-to-Day Key daily activities will involve: Inspection and testing of tools to ensure they meet technical specifications. Collaboration with team members to troubleshoot and resolve issues. Management of multiple concurrent tasks while effectively addressing challenges. Staying informed of the latest industry technologies in moulding and manufacturing. Maintaining a safe and organized workspace. Benefits This role comes with a range of benefits, including: A competitive salary. 25 days of annual leave, with an option to buy/sell holidays through a flexible scheme. Programs recognizing and rewarding employee contributions. Access to both internal and external learning and development opportunities. Employee Assistance Programme for support when needed. If you are a motivated individual eager to grow and thrive in a challenging yet rewarding environment, we welcome your application. Apply today to take the next step in your career! TPBN1_UKTJ

Day Supervisor (Electrical Bias) Role Overview We are seeking an experienced Day Supervisor (Electrical Bias) to support the fit-out and transition to full operation of a new corporate headquarters. Initially a temporary role (potentially until the end of 2024), there is scope for permanency as the building moves into steady-state operations. The successful candidate will act as the day-to-day operational supervisor during the fit-out phase, responsible for safe electrical isolations, power restoration, and the issuing and management of Permits to Work (PTW) for contractors. As the building progresses toward live operation, the role will support mobilisation, commissioning, and operational readiness activities. This is a unique opportunity to be involved from mobilisation through to full operation of a best-in-class smart building, gaining exposure to cutting-edge FM technologies and future-focused operating models. The Building The new headquarters incorporates industry-leading smart building technologies, including: • Fully integrated BIM (Building Information Modelling) platforms - Client concierge and digital service systems - A highly connected, data-driven environment designed to enhance efficiency, resilience, and sustainability Key Responsibilities Supervisory & Operational Duties • Act as Day Supervisor, overseeing daily site activities and contractor interfaces - Safely isolate and restore LV electrical systems to support fit-out works - Issue, manage, and close Permits to Work in full compliance with site procedures - Liaise with engineering contractors, shift teams, Engineering Manager, and Permit Manager to plan and execute works safely - Support fit-out contractor activities, including isolations, connections, permits, and access arrangements Mobilisation & Transition Support • Undertake structured training and system familiarisation as part of the Soft Landings process - Support the Shift Supervisor in developing operational processes and building configuration - Witness commissioning activities and review project and handover documentation - Assist maintenance teams during quieter project phases Operations & Maintenance • Maintain systems and assets using data-driven tools and digital platforms (training provided) - Raise, manage, and close jobs using PDAs and CAFM systems - Maintain accurate maintenance and permit records for directly employed staff and subcontractors - Investigate faults, identify root causes, and produce clear, timely reports - Prepare reports and technical documentation as required by the Engineering Manager or Shift Leader Continuous Improvement & Safety • Promote safe working practices, quality standards, and best-practice methodologies - Identify smarter, more efficient ways of working and contribute to continuous improvement initiatives - Support team performance, culture, and operational standards Skills & Experience Essential Technical Experience • Previous experience as a Building Services Engineer (electrical bias) - Practical experience within critical environments (corporate banking or data centre preferred) - Proven experience with Permit to Work systems and electrical/water isolations - Strong working knowledge of HVAC and associated building services systems - HV switching experience (11kV–33kV) – essential Qualifications • HV switching qualification and/or demonstrable experience (up to 33kV) - City & Guilds Electrical qualifications (Parts 1 & 2 or recognised apprenticeship) - 18th Edition BS7671 Wiring Regulations - C&G 2391 Inspection & Testing - ACoP L8 (Water Hygiene) - IOSH qualification - Willingness to be authorised as LV Authorised Person (LVAP) on site Technical Knowledge • BMS and building control systems - HVAC plant including chillers, AHUs, FCUs, and VAV systems - LTHW boilers - Life safety systems - 400V LV distribution systems - UPS and 2N power distribution architectures - STS / ATS systems - Standby generators - Smart buildings, IoT, and emerging technologies - Energy management and optimisation strategies Personal Attributes • Self-motivated, flexible, and eager to learn new tools and technologies - Strong customer-facing and communication skills - Calm under pressure with the ability to work to strict timescales - Proactive and solutions-focused mindset - Comfortable working independently or in a large, multi-disciplinary team - Willingness to adjust working patterns and support weekend working when required Core Competencies • Team player who leads by example and promotes high standards - Strong commitment to safety, quality, and compliance - Excellent organisational, coordination, and reporting skills - Confident PC user with experience of digital FM tools - Proven experience in HV operations and critical services environments

About the role The Non-Destructive Test Technician plays a key role in a fast-paced MRO environment, carrying out a range of NDT inspections on aircraft components in line with defined quality standards and procedures. LTLGS utilises multiple NDT disciplines, including Magnetic Particle Inspection (MPI), Fluorescent Penetrant Inspection (FPI), Barkhausen noise analysis, Ultrasonic Inspection, Eddy Current Testing (ECT), and Nital etch inspection. The role involves close collaboration with internal departments to identify and resolve technical issues efficiently, ensuring production continues without disruption. Where required, training will be provided to further develop technical capabilities and support ongoing professional growth. This role is days 0630-1430 with some flexibility required Duties and Responsibilities To participate in the process of writing and maintaining Technique (method) sheets for the testing of components, and to liaise with LTLGSs level 3 Technician. To understand and apply the company and industry statutory operational specifications for the evaluation of landing gear components. To test and verify the condition of a diverse range of components passing through the NDT area, and to perform these in a timely manner. You will be required to maintain Practical Experience Record (PER) book. Maintain a good level of NDT knowledge, prepare for assessments and examinations as required. To work and contribute to the team within the area, managing their individual certification to keep it current and valid attending internal and external training courses, as required, to maintain and develop the relevance of their certification Performing such routine maintenance on equipment in the area as is required to operate legally. To constantly monitor operating methods in order to facilitate both qualitative and qualitative improvements in the service provided to the customer. Full and effective liaison is maintained with all departments which are affected directly or indirectly by the assigned area of responsibility. To work within established company policies, procedures and agreements. Education and Qualifications Hold a valid NDT LEVEL 2 authorisation, trained to EN4179 or other internationally recognised equivalent by a recognised LEVEL 3 body in one or more of the required disciplines. Educated to at least GCSE level or equivalent. Good IT user knowledge (e.g. SAP or similar business software, Microsoft Office Excel). Basic knowledge of EASA/CAA/FAA requirements and other applicable aviation regulation. Knowledge of Health and Safety working practice. Able to communicate fluently in English both written and verbal. Experience and Knowledge Aerospace Apprenticeship served preferable. Good planning abilities and a willingness to be flexible. Capable of managing complex issues and ambiguity to tight deadlines. Experience with working to EASA 145 requirements. Our Benefits We offer a wide range of benefits designed to support your wellbeing, lifestyle, and career, including: Flight discounts and reduced travel rates Purchase and selling of annual leave Generous paid paternity and maternity leave One wellbeing day per year , dedicated to supporting your mental and physical wellbeing Discounts on hotels, retail, and leisure activities Employer pension contributions Reduced gym memberships to support a healthy lifestyle Company events and organised sporting groups to encourage connection and wellbeing In addition, our facility is within walking distance of the Elizabeth Line , making commuting quick, easy, and seamless from across London and beyond. TPBN1_UKTJ

If you are a Field Service, Installations & Inspection Engineer looking for a new challenge with a fabulous team and company who know how to support, develop, and reward their team, please apply now. Elevation Recruitment Groups Engineering Services Division are recruiting a Field Service, Insta

Due to continuous expansion, we are looking for an experienced Test & Inspection Supervisor to join our team, based local to the Crawley area. Supervise Test & Inspection Operative, including training them, supporting them and working with them to complete jobs.

Job Title: Electrical Tester - EICRs Location: South London Salary: £42,000 - £45,000 w/ Van and Fuel Card Job Type: Permanent Daniel Owen are currently seeking qualified Electrical Testers to carry out EICRs and remedials within Social Housing, predominately the communal areas.In th

Electrician High Earnings (£1500+ p/w) & Long-Term Security.If you are tired of working for companies who do not look after and support you, want a more varied day which challenges and pushes you to learn new skills to be an electrical engineer and part of a team in a rapidly growing business, thi

Elevation Recruitment Groups Engineering Services Division are recruiting a Field Service, Installations & Inspection Engineer in the Sussex region for our long standing client. The Field Service, Installations & Inspection Engineer will be responsible for the safe installation and maintenan

Highway Inspection Officer Rate of pay: £260 per day (umbrella) Location: Tinkers Lane Depot, Windsor, UK Job Type: Full-time temp until May with possible extensionWe are seeking a dedicated Highway Inspection Officer. The ideal candidate will control day-to-day activities regarding basic mai

This is a key operational role where you’ll carry out safety inspections, respond to enquiries, and ensure contractor works meet required standards. Carry out planned and reactive safety inspections across the highway network.

We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.