Inspection jobs in TwickenhamCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Esher cluster, covering areas like Esher, Kingston upon Thames, Surbiton, Epsom, Ewell, Tolworth, Chessington, Worcester Park, Sutton, Croydon, Mitcham, Wimbledon. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Esher cluster, covering areas like Esher, Kingston upon Thames, Surbiton, Epsom, Ewell, Tolworth, Chessington, Worcester Park, Sutton, Croydon, Mitcham, Wimbledon. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Esher cluster, covering areas like Esher, Kingston upon Thames, Surbiton, Epsom, Ewell, Tolworth, Chessington, Worcester Park, Sutton, Croydon, Mitcham, Wimbledon. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Barnet cluster, covering areas like Barnet, Finchley, Totteridge, Whetstone, Hendon, Golders Green. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate -enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,370 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in London & Greater London Barnet Bromley Enfield Heathrow Hillingdon Holloway Shepherd's Bush Streatham Wembley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary to £44,385, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Bromley cluster, covering areas like Bromley, Orpington, Beckenham, Chislehurst, Sidcup, Eltham, Woolwich, Greenwich, Lewisham, Peckham, Camberwell. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need... Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate -enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the South East: Brighton Esher Guildford High Wycombe Horsham Maidenhead Milton Keynes Oxford Newbury Reading Slough A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

We are currently seeking HGV Drivers in and around London for flexible and adhoc work.You need:UKDriving LicenceReliable and a good timekeeperExperience of operating a HGV in safe mannerExpectations:Confident Class 1/2/7.5 driverAble to perform a complete pre and post-operation inspection of the vehicle as required by company policy checking tyre pressure, fluid levels, safety equipment, gauges and controls are in good working order.Able to report any safety issues on standard reportsAble to follow instructions and the delivery schedule and confident to interact with dispatchers to complete the job to a high standardFollow all required safety policies and proceduresPay rates£16 PAYE min£20 UMBRELLA minMIN 8 OR 10HRSAbout UsIDrive Recruitment are one of the UK's fastest growing Driving and Industrial Sector Recruitment Agencies in the UK. We are currently working with some of Sussex'sleading companies and have a range of driving roles available on an ongoing basis.TPBN1_UKTJ

Production Assembly TechnicianLocation:Hook, RG27 9ULJob&Talent are recruiting for and experienced Assembler to perform operational tasks within the assigned area of the business, to undertake and assist in any training or improvement activities as required. To continually develop product and process knowledge while accepting responsibility for their activities and working areas.Duties:Support Line Management at all levels, to meet the business objectives.Comply with all Quality-Health and Safety-and Environmental requirements.To familiarise themselves with all activities within their working areas.Assist with inventory and stock keeping.Ensure physical working spaces meet and exceed company housekeeping standards.Maintain traceability throughout the manufacturing process.Follow Standard Operating Procedures (SOPs) to assemble battery stacks, including the precise alignment of electrodes, frames, separators and bipolar plates.Operate basic pilot line machinery, including mixer dyers, heaters, chillers, pallet trucks or automated dispensing systems. .Skills and Personal Attributes :Self-Motivated timekeeping.1-10 years. No prior battery experience required. Experience in a regulated manufacturing environment (electronics, automotive, plastics, or medical devices)Flexible and Enthusiastic with a Positive Attitude.Prepared to accept responsibility and work toward Level 3 Inspection Training.Able to read and write clear, readable schematics for the manufactured product through effective utilization of schematic tools.Must be comfortable performing repetitive work.Working Hours:The shift pattern will beMonday to Friday - 9:00 - 17:00Salary: From £14 (break is paid)Please note: This role requires a long-term commitment and is not suitable for candidates seeking short-term or temporary work. There is the potential for the role to become permanent, with opportunities to progress into a more senior position.If you are interested in the above role, please click apply.If you are looking to contact our onsite team, please visit the site locator on our website.Job&Talent do NOT charge any fees for our services.Job&Talent acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.TPBN1_UKTJ

A Career Without LimitsAs the nation’s flag carrier, we take great pride in connecting Britain with the world and the world with Britain.It’s something we’ve been doing for over 100 years, ever since we launched the world’s first international scheduled air service between London and Paris.This originality has been in our blood since day one. It’s the spirit we share with the people that fly with us, our partners, and our colleagues.So, whether you are a reassuring voice on the end of a phone, a smile at the door, under a wing keeping the turbines spinning or landing us gently in far-flung places, a job at British Airways is yours to make.We know great things can happen when you’re inspired to think big and bring your ambition to work every day, which is why, at British Airways the sky is never the limit!The role:Overseas Station Engineer – LHR The individual will be required to provide licensed aircraft engineering support for British Airways and Customer Airlines both worldwide and home locations as required.What you’ll do:Member of a small team of certifying engineers prepared to carryout short term postings anywhere on the BA network.Prepared to be rostered in home maintenance bases as required.Maintain the highest airworthiness, quality, safety, and performance standards, to ensure all company and legal requirements appertaining to aircraft maintenance and inspection are complied with.Customer Service orientated when in liaison with British Airways Line Maintenance station personnel and customers.Ensure BA and Customer Line Maintenance operations for the Station/Area are delivered to BA, Customer, UK CAA, EASA or National Aviation Authority Compliance Standards.Manage a station as directed by the Station Maintenance Manager or Area Maintenance Manager to deliver operational, safety, quality and financial targets.Represent British Airways Line Maintenance as and when required during contact with customers and local regulatory bodies.Ability to hold at least three current Boeing/Airbus aircraft types. As well as engine variants and avionics extension authorisations, in order to support BA and Customer aircraft.Complete and maintain compliance with all Company training requirements required to carry out the role and work to the required Company and Health & Safety standards.What you’ll bring to British Airways:Ability to understand business needs & required action to support Business objectives.Interpersonal skills that suit a dynamic environment.Culturally aware, capable of working and managing across cultural boundaries.Demonstrate a high degree of problem solving & trouble shooting skills.Demonstrate technical skills & knowledge within an aircraft maintenance environment.PC literate, able to demonstrate an understanding and capability in all BA Engineering systems including SAP.Planning & negotiation skills.Your experience:Hold a Full UK CAA B1 licence or equivalent on at least two current Boeing/Airbus aircraft types (Essential). Three types are desirable.Must be able to hold a working visa & petition to work in North America (BA will support application). (Essential)Demonstrable aircraft maintenance experience (6 months within the last 2 years). (Essential)Team leading experience. (Desirable)What we offer:We believe that all the people who work with us should feel valued for the part they play. It’s one of the reasons our rewards go far beyond a competitive salary.From the day you join us, you’ll get access to brilliant staff travel benefits including unlimited basic and premium standby tickets on British Airways flights. You’ll also receive up to 30 discounted ‘Hotline’ airfares per year for yourself, friends, and family.At British airways you’ll have the chance to take on new challenges and move forward in a way that feels right for you. We encourage all those who work for us to consider opportunities right across our business to help you develop and progress.We never stand still, and we don’t expect our people to either!Inclusion & DiversityWe recognise that all our colleagues are uniquely different and bring their own originality, creativity, and identity to work. We encourage people from all backgrounds to be part of our journey to become a Better BA.Find out more: Candidates must have the right to live and work in the UK. For further information on this role please contact Shaun Brimacombe via email shaun.brimacombe@ba.com

Complex Needs Teaching Assistant - Richmond upon Thames - SEN School - £95-£115 a day (depending on experience) - Full Time - Immediate Start \n\n • Complex Needs Teaching Assistant - Previous experience supporting pupils with complex special educational needs required\n, • Complex Needs Teaching Assistant - Experience working with autism, PMLD, SLD, MLD or physical disabilities desirable\n, • Complex Needs Teaching Assistant - Must be confident supporting communication, personal care and learning where required\n, • Complex Needs Teaching Assistant - Required full time ASAP\n\n Have you previously worked as a Complex Needs Teaching Assistant? Do you have experience supporting pupils with profound or multiple learning difficulties? Are you able to commute easily to Richmond upon Thames? \n If yes, then this Complex Needs Teaching Assistant role is for you!!! \n The Role - Complex Needs Teaching Assistant Seeking a compassionate and proactive Complex Needs Teaching Assistant to support pupils aged 4-19 within a specialist SEN setting. You will work alongside teachers, therapists and healthcare professionals to provide 1:1 and small-group support for pupils with a range of complex needs, including autism, severe learning difficulties, profound and multiple learning difficulties, physical disabilities and medical needs. The role involves supporting pupils to access learning, assisting with communication using alternative communication methods, promoting independence, providing personal care where required and helping pupils achieve the outcomes outlined in their EHCPs. \n The School - Complex Needs Teaching Assistant This specialist provision is located in the London Borough of Richmond upon Thames and is within walking distance of a nearby National Rail station. The school supports pupils with a wide range of complex special educational needs and provides personalised learning, integrated therapeutic support and a nurturing environment designed to promote communication, independence and life skills. The school was judged 'Good' at its most recent Ofsted inspection in 2023. \n Apply here for this Complex Needs Teaching Assistant role or contact Brandon at Qualiteach for more information!

Quality Inspector \n Location: Hull \n Salary: Competitive + Benefits \n Job Type: Permanent, Full Time \n About the Role \n Winsearch is recruiting an experienced Quality Inspector on behalf of a leading manufacturing organisation based in Hull. \n This is an excellent opportunity for a detail-oriented quality professional to join a high-performing team and play a key role in ensuring product quality, compliance and customer satisfaction. \n The successful candidate will be responsible for carrying out precise measurement activities, analysing inspection data, maintaining calibration systems and supporting quality assurance processes across the business. \n Key Responsibilities \n\n • Carry out dimensional inspections using a range of precision measuring equipment, including CMMs, digital callipers and height gauges.\n, • Interpret engineering drawings, CAD models and GD&T specifications.\n, • Complete Initial Sample Inspection Reports (ISIRs).\n, • Conduct and support Measurement Systems Analysis (MSA) studies, including Gauge R&R.\n, • Analyse inspection data and investigate dimensional discrepancies.\n, • Produce accurate quality documentation and customer reports.\n, • Support the calibration and maintenance of measurement equipment across site.\n, • Ensure compliance with quality standards, procedures and customer requirements.\n, • Assist with annual validation activities and continuous improvement projects.\n, • Work closely with manufacturing and quality teams to maintain high product standards.\n\n About You \n Essential Requirements \n\n • Previous experience as a Quality Inspector, Metrologist or within a measurement laboratory environment.\n, • Experience using CMM equipment and other precision measuring tools.\n, • Knowledge of PPAP processes and control plans.\n, • Ability to interpret 2D and 3D engineering drawings, including GD&T.\n, • Understanding of quality management systems and industry standards.\n, • Strong communication and organisational skills.\n, • Good IT and reporting capabilities.\n, • Experience working within a manufacturing environment.\n, • CMM training or relevant measurement experience.\n\n Desirable Skills & Experience \n\n • Experience inspecting plastic injection-moulded components.\n, • Understanding of injection moulding processes.\n, • Knowledge of the wider PPAP framework.\n, • Experience using laser scanning or vision systems.\n, • Mechanical engineering qualifications.\n, • Additional metrology or measurement software training.\n\n What's on Offer? \n\n • Competitive salary and benefits package.\n, • Opportunity to work with advanced inspection and measurement technology.\n, • Career development and progression opportunities.\n, • Supportive and collaborative working environment.\n, • Secure role within an established and growing manufacturing business.\n\n Apply \n If you're an experienced Quality Inspector looking for your next challenge in Hull and want to join a business where quality is at the heart of everything they do, we'd love to hear from you. \n Winsearch acts as an employment agency in relation to this vacancy. We are committed to equal opportunities and welcome applications from all suitably qualified candidates. \n INDWIN \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

Vehicle Technicians,Are you looking for an industry leading basic salary and bonus package? Would you like to have a fully insured and maintained company car, with the option for a family member to have a vehicle too? Have your toolbox fully insured as well as ongoing training and development plus numerous shopping discounts? Then we have the ideal role for you! MAIN DEALER EXPERIENCE PREFERRED BUT NOT ESSENTIAL. \n Working in state-of-the-art facilities you will be responsible for carrying out inspection and service routines, repairs and testing of vehicles in a professional and safe manner, in accordance with dealer and manufacturer standards. This is a GREAT opportunity for you to demonstrate your skills, with the backup and all the benefits of a main dealer group. \n Why Apply for this Vehicle Technician role?• You will be rewarded with a competitive salary package PLUS £1500 joining bonus!• This dealership has a friendly and team spirited environment• Excellent training available• Unique company car sheme \n So, what do we look for from you as a Motor Vehicle Technician?• An NVQ 2, City & Guilds or equivalent,• Service Technician experience and ideally, you will also have some main dealership experience• An MOT testing qualification is desirable, but this isn't essential.• A full valid driving licence as a minimum• What is vital is that you have the attention to detail to keep standards high. \n To find out more or to apply for this vacancy you can call the office on , email or call Daniel Walton directly on \n We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Automotive Technician or Auto Technician or PDI Technician or Pre Delivery Inspection Technician or Service Technician or Senior Technician or Diagnostic Technician or Master Technician or Systems Technician or Qualified Technician or HGV Technician or LCV Technician or Heavy Goods Technician or Light Commercial Technician or Passenger Car Technician or Car Technician or Car Tech or LGV technician or Large Goods Vehicle Technician or Mechanic or HGV Fitter or Fast Fit technician Lots of Motor Trade Jobs throughout the UK. Call Us Now for Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.

Production Supervisor£45,000 - £52,000Permanent PositionMonday – Thursday 8am-4:30pm, Friday 1:30pm finishCompetitive Salary, 25 days holiday + Bank Holidays4x annual salary life assurance, pensionSunbury on Thames Our client are a leading manufacturer providing specialist solutions to a variety of industries such as aerospace, power generation, rail and oil and gas industries. They are looking for an experienced Cell Leader / Production / Supervisor to join the teamProduction SupervisorSpecific Job Requirement as Cell Leader:\n\n • Manufacture and deliver product as per agreed production plan to ensure company targets are met\n, • Set and measure daily/weekly output targets for the team\n, • Lead daily cell meetings to highlight and resolve any issues within area of responsibility including Delivery, EHS, Quality or Staff related topics\n, • Develop and enable team to meet company goals and customer requirements. Actively align cell capacity and capability with customer requirements; assess skills/capacity and implement cross training or recruitment programmes\n, • Work closely with supporting functions to ensure cell team is able to meet operational targets and continuous improvements\n, • Lead/train/mentor team in Lean manufacturing techniques\n, • Adherence to the MJR with weekly performance appraisal with operations manager/director.\nEssential Skills/Experience/Qualifications;\n\n, • Supervisory experience in a complex, low/medium batch production cell with a proven track record of people and change management\n, • Experience of implementing and driving through change in a lean environment including 5S, Gemba walks, EHS ownership\n, • Knowledge of Aerospace Quality Management Systems including traceability and operator self inspection, training records, skill matrix, Human Factor\n, • Knowledge of Air-conditioning/Heaters/Fans Equipment or similar engineered products would be an advantage\n, • Ability to train and mentor\n, • Precision assembly experience, specifically motors and cooling systems would be highly beneficial, but complex assembly experience would be considered a pre-requisite\n

CNC Turner \n Chessington, Surrey - Commutable from Kingston upon Thames, Epsom, Surbiton, Sutton, Croydon, Leatherhead, Esher, New Malden, Wimbledon and surrounding areas \n £35,000 - £40,000 + Monday - Thursday (8:00am - 5:00pm) + Early Finish Fridays (12:00pm) + Annual Bonus + Life Assurance + Pension + 25 Days Holiday + Bank Holidays \n Are you a CNC Turner, CNC Lathe Setter/Operator, CNC Programmer, or CNC Machinist with experience in a precision engineering environment, looking to join a stable company offering long-term security, progression, and an excellent work-life balance? \n On offer is a permanent position within a well-established precision engineering business supplying high-quality components into industries including aerospace, automotive, oil & gas, nuclear, and general engineering. \n Due to continued growth, they are looking to expand their machining team at their Chessington facility. You will play a key role in manufacturing high-precision turned components, ensuring products are produced to the highest quality standards while supporting a busy and modern machine shop. \n In this role, you will be responsible for setting and operating CNC turning machines, working from engineering drawings, producing precision components to tight tolerances, and carrying out in-process inspection to ensure all parts meet customer specifications. \n The day-to-day responsibilities of this role include: \n\n • Setting and operating CNC turning machines to manufacture precision components\n, • Producing components to tight tolerances from engineering drawings\n, • Performing tool changes, offsets, and machine adjustments\n, • Inspecting finished components using precision measuring equipment\n, • Maintaining high standards of quality, accuracy, and housekeeping within the machine shop\n, • Working with production and engineering teams to meet customer delivery schedules\n\n The Person: \n\n • Experience as a CNC Turner, CNC Lathe Setter/Operator, CNC Machinist, or similar within a precision engineering environment\n, • Experience setting and operating CNC lathes (programming experience advantageous but not essential)\n, • Ability to read and interpret engineering drawings\n, • Experience using precision measuring equipment to inspect machined components\n, • Strong attention to detail with a commitment to producing high-quality work\n\n Reference Number: BBBH277332 \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

CNC Turner (Programmer / Setter / Operator) \n Location: Kingston upon Thames (KT3) \n Salary: £20-£22 per hour (dependent on experience) \n Job Type: Permanent, Full-time \n Job Overview \n We are seeking an experienced CNC Turner (Programmer / Setter / Operator) to join our skilled engineering team based in Kingston upon Thames. This is an excellent opportunity for a highly capable machinist who enjoys working on precision engineering projects and takes pride in producing high-quality, low-volume components. \n The successful candidate will be responsible for programming, setting, and operating a Doosan Puma 2600 CNC lathe with C and Y Axis capability. The role requires a strong understanding of CNC machining processes, the ability to programme machines from scratch, and confidence working independently to produce complex components to exacting standards. \n This position would suit an experienced CNC Turner who enjoys variety, problem-solving, and working on small-batch, high-precision engineering projects. \n Key Responsibilities \n\n • Programme, set, and operate a Doosan Puma 2600 single-turret CNC lathe\n, • Utilise C Axis and Y Axis machining capabilities to produce complex components\n, • Create, write, prove, and edit CNC programmes using machine controls\n, • Select appropriate tooling, cutting parameters, and machining strategies to achieve optimum results\n, • Set machines efficiently, including tooling changes, offsets, work holding, and first-off inspection\n, • Manufacture a wide range of precision components from various materials, including challenging engineering materials\n, • Produce small-batch components, typically ranging from 1-10 off, with a strong focus on quality and accuracy\n, • Read and interpret detailed engineering drawings, specifications, and manufacturing instructions\n, • Work to tight tolerances and maintain high standards of workmanship\n, • Carry out in-process inspection and quality checks using appropriate measuring equipment\n, • Maintain a clean, safe, and organised working environment\n, • Work effectively both independently and as part of a wider engineering team\n, • Support continuous improvement by suggesting improvements to machining methods and processes\n\n Essential Requirements \n\n • Substantial experience in CNC turning within a precision engineering environment\n, • Proven experience programming, setting, and operating CNC lathes\n, • Ability to programme CNC machines from scratch rather than relying solely on existing programmes\n, • Experience working with CNC turning centres with C and Y Axis functionality\n, • Strong knowledge of machining techniques, tooling selection, and cutting conditions\n, • Experience machining a variety of materials\n, • Ability to confidently interpret engineering drawings and technical specifications\n, • Good understanding of geometric tolerances and precision measurement\n, • Ability to work independently with minimal supervision\n, • Excellent attention to detail and a commitment to producing quality components\n\n Benefits \n\n • Competitive hourly rate of £20-£22 per hour, depending on experience\n, • Permanent, full-time position\n, • Company pension scheme\n, • Flexible working schedule\n, • On-site parking\n, • Opportunity to work within a skilled and experienced engineering team\n, • Varied and interesting precision machining projects\n\n Job Types: Full-time, Permanent \n Benefits: \n \n\n • On-site parking\n\n

Welding Inspector – Rail / Rolling Stock \n Location: London (Acton) \n Rate: £47.48 per hour \n Type: Contract \n \n An opportunity has arisen for an experienced Welding Inspector to support inspection and assurance activities on safety-critical rolling stock vehicles and components within a rail engineering environment. \n \n The successful candidate will carry out inspections before, during and after welding, ensuring all work complies with the relevant industry standards and quality requirements before assets return to service. \n \n Key Responsibilities \n\n • Conduct welding inspections in line with the Inspection and Test Plan and relevant standards.\n, • Perform visual inspection of welds in accordance with ISO 17637.\n, • Identify defects and recommend corrective actions to maintain welding quality.\n, • Interpret engineering drawings and specifications to ensure fabrication meets required tolerances.\n, • Record and investigate non-conformances within the Quality Management System.\n, • Compile and complete quality documentation packs to the required standard.\n, • Carry out internal surveillance audits to ensure compliance with welding procedures.\n, • Witness welder qualification tests in accordance with ISO 9606 and support the development of welding personnel.\n, • Work closely with quality, production, engineering and operations teams to ensure consistent welding standards.\n\n \n Essential Requirements \n\n • Level 4 qualification in Mechanical Engineering, Fabrication & Welding, or equivalent engineering experience.\n, • CSWIP 3.1 Welding Inspector certification (minimum).\n, • Proven experience in a welding inspection or quality control role.\n, • Experience applying the following standards:\n\n ISO 5817 – Quality levels for imperfections in fusion-welded joints \n ISO 10042 – Arc-welded joints in aluminium and its alloys \n ISO 3834 – Quality requirements for fusion welding of metallic materials \n EN 15085 – Welding of railway vehicles and components \n\n • Strong ability to interpret technical drawings and welding specifications.\n, • Excellent communication, organisational and analytical skills.\n\n \n \n We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. \n For more information on this position, please contact Marika Powell at ARM on 02392 228232 or email your CV and covering letter to marika.powell@arm.co.uk.

New job: Quality Engineer Salary: Competitive, depending on experience Location: Hayes, Greater London Job Type: Full-time, Permanent An exciting opportunity has arisen for a Quality Engineer to join a precision engineering and manufacturing environment in Hayes. This role is ideal for someone with strong inspection experience and a keen eye for detail, looking to support high-quality production standards in Hayes. About the Role The Quality Engineer based in Hayes will be responsible for ensuring products meet strict aerospace and manufacturing quality requirements. The role involves hands-on inspection, use of precision measurement tools, and supporting first article and compliance documentation within a busy production environment in Hayes. Key Responsibilities Carry out detailed inspection of machined and manufactured components in Hayes Use precision measuring equipment including verniers, micrometers, height gauges, and other inspection tools Operate and interpret results from CMM (Coordinate Measuring Machine) inspections Compile and review AS9102 First Article Inspection Reports (FAIRs) Support incoming, in-process, and final inspection activities across production in Hayes Identify non-conformances and support root cause analysis and corrective actions Ensure compliance with aerospace and customer quality standards in Hayes Work closely with production and engineering teams to resolve quality issues About You The ideal Quality Engineer for this Hayes role will have: Strong experience in inspection within a manufacturing or aerospace environment Confident use of gauges, verniers, micrometers, and inspection tools Understanding of AS9102 and experience producing FAIRs Experience using CMM equipment (programming or operation) Strong attention to detail and methodical working approach Ability to read and interpret engineering drawings Good communication skills and a proactive attitude Experience in quality assurance or inspection in Hayes or similar environments Benefits Competitive salary based on experience Career development and training opportunities * Stable, full-time position in Hayes with long-term progression potential If you are a detail-focused Quality Engineer looking for a hands-on inspection role in Hayes, this is an excellent opportunity to build your career in a specialist manufacturing environment

Project Engineering Manager Location: Hayes, London Sector: Data Centres & Mission Critical Construction Salary: £80,000 - £90,000 + Package The Opportunity A leading specialist contractor is looking to appoint an experienced Project Engineering Manager to join its delivery team on a flagship hyperscale data centre development in Hayes, West London. This is a unique opportunity to take ownership of the engineering function on one of the UK's largest mission-critical construction projects. The development comprises 18 data halls, supporting high and medium voltage energy centres, associated infrastructure and complex engineering systems, requiring exceptional technical leadership throughout the project lifecycle. As the senior engineering lead, you'll be responsible for technical governance, engineering assurance and quality management across the project, ensuring all works are delivered safely, compliantly and in accordance with approved design information, contractual obligations and engineering best practice. Role Overview You will be responsible for: Leading the engineering function across a major hyperscale data centre project Establishing engineering governance, technical assurance processes and quality standards Providing technical leadership to multidisciplinary engineering teams Managing engineering interfaces across civil, structural, architectural, mechanical and electrical packages Overseeing technical coordination and engineering compliance across all project disciplines Owning the project's quality assurance strategy, inspection regime and engineering assurance framework Managing NCRs, technical deviations and concession processes, ensuring corrective actions are implemented effectively Identifying and mitigating technical risks that could impact programme, quality, safety or commercial performance Supporting project teams with engineering advice throughout construction, commissioning and handover Leading, mentoring and developing Senior Engineers and wider engineering teams Driving continuous improvement, lessons learned and engineering best practice across the project About You Significant experience leading engineering teams on major construction or infrastructure projects Previous experience as a Project Engineering Manager, Engineering Manager, Technical Manager or Senior Engineering Lead Strong understanding of engineering governance, technical assurance and quality management systems Proven experience managing multidisciplinary engineering teams across complex construction projects Excellent knowledge of design management, constructability and buildability principles Experience delivering large-scale data centre, mission-critical, healthcare, pharmaceutical or similarly complex projects would be highly advantageous Strong understanding of NEC contracts, with experience working in collaborative project environments Company Profile This specialist contractor delivers complex construction, engineering and refurbishment projects across the data centre, defence and energy sectors. Providing an integrated service from early design and engineering through to construction, commissioning and client handover, the business has developed an outstanding reputation for delivering technically demanding projects to the highest standards of quality, safety and engineering excellence. With a strong pipeline of secured work and continued investment in its people, this is an excellent opportunity to join a market-leading organisation delivering some of the UK's most advanced mission-critical facilities. What's in it for you? 💰 £80,000 - £90,000 + Package 🚗 Car allowance 🏥 Private BUPA healthcare and cash plan 💷 Competitive pension scheme ⚡ Electric vehicle scheme 🚲 Cycle to Work scheme 👓 Eyecare vouchers 🎂 25 days holiday + Bank Holidays + Birthday off 📈 Genuine opportunities for progression within a growing specialist contractor 🏗️ Opportunity to lead engineering on one of the UK's flagship hyperscale data centre developments About Walker & Sloan Walker & Sloan are a BCorp certified recruitment business specialising in construction and the built environment. I, Jack Houghton, work closely with contractors, developers and consultancies across the UK and handle all applications with complete confidentiality

Embedded Systems Engineer Job – Middlesex An exciting Embedded Systems Engineer job is available in Middlesex for an engineer with a passion for designing advanced automated test and measurement systems for high power RF and microwave products. This Embedded Systems Engineer job offers the opportunity to work on cutting edge technology while supporting the development, validation and production of complex RF amplifiers. The Embedded Systems Engineer Job Responsibilities The successful candidate will: Design and develop Automatic Test Equipment (ATE) for high power RF amplifiers. Interface test systems with Vector Network Analysers (VNAs), RF power meters, spectrum analysers and other laboratory equipment. Design safe test solutions for equipment operating with hazardous voltages. Develop computer controlled test procedures and automated data capture systems. Support Production Test Engineers with component level fault finding and root cause investigations. Work alongside Design Engineers to ensure products are designed for efficient testing. Write and maintain Acceptance Test Procedures (ATPs) and TWT alignment procedures. Develop Environmental Stress Screening (ESS) methods and test equipment. Plan and execute product validation, qualification and design verification testing. Support and train Production Test Engineers on new test equipment and procedures. Support New Product Introduction (NPI) reviews to ensure test readiness. Produce technical reports and documentation for test activities. Key Responsibilities Design, manufacture, commission and verify custom test equipment and fixtures. Develop and maintain ATE software and configuration control. Ensure all test equipment and procedures meet safety requirements. Develop and approve Acceptance Test Procedures. Support First Article Inspection, Design Validation and Product Qualification testing. Provide detailed fault finding and root cause analysis to support production. Skills and Experience The ideal candidate will have: BSc or HND in Electrical/Electronic Engineering, Physics or a related discipline. Experience with analogue electronic circuits. Knowledge of power electronics. Experience using RF and microwave measurement equipment. Knowledge of LabVIEW for ATE design and implementation. Understanding of high voltage safety hazards and protection methods. * Strong fault-finding and analytical skills. Why Apply? This Embedded Systems Engineer job offers the opportunity to work on innovative RF and microwave technology within a collaborative engineering team in Middlesex. The successful candidate will play a key role in developing advanced automated test systems while supporting the delivery of high performance products. If you are looking for an Embedded Systems Engineer job where you can combine embedded systems, RF technology, automation and problem solving, this Embedded Systems Engineer job in Middlesex offers an excellent opportunity for career development. This job is based in Middlesex and provides the chance to work on technically challenging projects within a growing engineering business

Electrician, School Project, Southall, start 22/07/2026, Enhanced or basic DBS We are looking for an experienced and reliable Electrician for a school project in Southall. Scope of Works: Installation of a mains MCCB panelboard Installation of distribution boards Wiring and connection of AC units Testing and inspection works, including the ability to carry out an EICRRequirements: Enhanced or basic DBS Certificate (essential, as children will be present on site at times) Qualified Electrician with relevant experience Competent in testing and inspection/EICR reporting Must provide own steps, drills, and hand tools Professional, clean, and tidy working practices Must leave the work area clean and safe at the end of each day JIB cardProject Details: Location: Southall Potential Dates: 22nd July - 31st August (programme dependent) Working Hours: 7:30am - 4:00pm 30-minute lunch break 8 hours paid per dayRate: £250 per day (8-hour day)Please apply to be considered. Tech-People are a leading recruitment business within M&E and Construction. We are committed to attracting and providing a diverse workforce reflective of the communities we serve and supporting an inclusive working environment for all. If you're interested, please apply or contact Gosia at Tech People on (phone number removed) for more information

Gold Card Electrician (Progression to Service Engineer) \n £42,000 - £45,000 + Training on Renewables + Progression + Company Van (Private use) + Private Medical + Benefits \n Greenford, Ealing \n Are you a Gold Card Electrician who holds a City and Guilds 2391 Test & Inspection certificate for the opportunity progress your career, becoming an expert in renewable rain-water recycling technology? \n Do you wa... \n \n \n ZIPC1_UKTJ

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair.A competitive base salary of £40,170, with on-target earnings of up to £52,000A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities40 hours per week, with core hours from8:30 am to 5:00 pm, and 1 in 4 Saturdays.Opportunities in the South West:Bath Bournemouth Bridgwater Bristol Newton Abbot Poole Taunton Torquay Trowbridge A Different Kind of RAC Role: Welcome to SMRThe RAC is known for roadside rescue - but this isnt that.Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park.There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries.Instead, youll work through a scheduled list of jobs, with the time, tools and support you need to do quality work.What to expectYour day starts with a clear digital schedule. Each job is pre-booked, with the member expecting you.Youll carry out:- Routine servicing- Diagnostics using advanced mobile equipment- In-depth repairs youd normally complete in a workshop- Member advice and recommendations based on your inspection- Vehicle safety checks aligned to RAC standardsAnd because SMR is structured, youre not reacting to breakdowns - youre delivering planned work that you can prepare for.From day one, youll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. Youll use your technical skill and problem-solving ability to get people moving again; safely, quickly and confidently.Why SMR is different (and why techs love it)- Planned appointments instead of emergency responses- Consistent workflow instead of unpredictable demands- In-depth repairs, not roadside temporary fixes- Time to do the job properly, with support and parts ordering built in- Clear schedules using RACs mobile service platformIts the ideal role for techs who want variety and independence without the reactive nature of Patrol.What youll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years experience or 5+ years experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 pointsNo CV required when you apply and it takes just 5 minutes it's easier than ever to start your journey with us.As a Mobile Mechanic at the RAC, youll get benefits that go the extra mile:Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with MondaySaturday availability (8am8pm), offers flexibility and stabilityOpt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary.Two extra days could give you an extra £5,000.It's your choice - more flexibility, more reward.Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings.Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments.Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term.Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it.Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, youll automatically join our Colleague Share Scheme, giving you a stake in our collective success.Who thrives here?Youre more than just great with tools - youre great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service.You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, youre hands-on, adaptable and confident making decisions on the spot.You take pride in using your technical ability to genuinely help people and keep them moving.The role is ideal if you want:? Independence in a mobile role? The stability and support of a trusted national organisation? Ongoing development, including future EV and diagnostic skills? A role where giving members complete peace of mind is simply part of what you doWere the RACAt the RAC, we dont stand still. With over 125 years of history and 12.5 million members, were on a mission to become the UKs number one motoring services provider.Our culture reflects that ambition backed by a 4.5-star Glassdoor rating, our people know were serious about career growth, recognition, and support.We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life its what sets us apart and drives us forward.TPBN1_UKTJ

Electrical Building Services Engineer (Foot Mobile) ?? Central London?? Competitive Salary + Travel Card + Overtime + 1 in 4 Call-Out + Excellent BenefitsJoin Sowga Building Services, Delivered Better. At Sowga , part of the Pareto FM Group, we deliver exceptional building services solutions across some of London's most prestigious commercial properties. Our engineers are at the centre of everything we do, and we pride ourselves on creating a supportive environment where people can develop, progress and build long-term careers.Due to continued growth, we're looking for an experienced Electrical Building Services Engineer to join our Foot Mobile engineering team in Central London.This is an excellent opportunity for an electrically biased engineer who enjoys variety, problem solving and working across a diverse portfolio of commercial buildings. You'll deliver planned and reactive maintenance, fault finding and electrical repairs while being supported by an experienced engineering team.The Opportunity Reporting to the Contract Supervisor and Contract Manager , you'll become a key member of our engineering team, responsible for maintaining safe, compliant and fully operational building services for our clients.You'll carry out planned preventative maintenance (PPM), reactive maintenance, fault diagnosis and repair works across electrical building services systems, while also supporting wider building services requirements when required.You'll have the autonomy to manage your workload while having the support of experienced supervisors and managers who are invested in your success.What You'll Be Doing Carry out planned preventative maintenance (PPM) across commercial buildings.Respond to reactive maintenance requests and emergency breakdowns.Diagnose electrical faults and complete repairs safely and efficiently.Maintain electrical systems, plant and associated building services equipment.Carry out testing, inspection and minor installation works.Maintain lighting systems, small power installations, distribution equipment and controls.Use Building Management Systems (BMS) for first-line diagnostics and alarm response.Complete maintenance records, service reports and compliance documentation.Build strong relationships with clients and building occupiers through excellent customer service.Ensure all work is completed safely and in line with statutory requirements.About You We're looking for an electrically biased engineer who takes pride in delivering a high-quality service and enjoys working as part of a professional engineering team.Essential NVQ AM2 Electrical qualification.18th Edition Wiring Regulations.Experience working within commercial building maintenance or facilities management.Strong electrical fault-finding and maintenance experience.Good understanding of safe working practices, including the Electricity at Work Regulations.Ability to work independently and manage your own workload.Excellent communication and customer service skills.Experience working with:Electrical distribution systems.Switchgear.Lighting systems.Small power installations.Generators and associated controls.Battery systems.Building Management Systems (BMS).General building services plant and equipment.Desirable City & Guilds 2391 Inspection & Testing.IOSH Working Safely.PASMA.IPAF.High Voltage (HV) awareness or certification.Experience with HVAC controls, pumps, ventilation systems and wider mechanical building services.Why Join Sowga? At Sowga, we recognise that great engineers are essential to delivering exceptional service. That's why we invest in our people, support career development and provide opportunities to progress.You'll join a collaborative engineering team where your skills are valued, your development is encouraged and your contribution makes a difference.What's On Offer Competitive salary.Company travel card.Overtime opportunities.Approximately 1 in 4 call-out rota following successful completion of probation.Ongoing technical training and professional development.Support from experienced Contract Supervisors and Contract Managers.Genuine career progression opportunities into Supervisor and Contract Management roles for the right individuals.Opportunity to work across prestigious commercial buildings in Central London.A supportive team culture built around professionalism, teamwork and continuous improvement.If you're an experienced Electrical Building Services Engineer looking for your next opportunity with a growing business that invests in its engineers, we'd love to hear from you.TPBN1_UKTJ

Mechanical Inspector - We are looking for a skilled Mechanical Inspector to join our aerospace inspection team. The ideal candidate will have strong experience in GD&T, manual inspection techniques, use of shadowgraph/optical comparators, and conducting First Article Inspection Reports (FAIRs). Key responsibilities: - Perform detailed inspections of aerospace components against engineering drawings and specifications using GD&T principles. - Conduct manual inspections using precision hand tools (calipers, micrometers, height gauges, Go/No-Go gauges) and optical comparators/shadowgraphs. - Execute and document FAIRs/FAIs, preparing accurate inspection reports and non-conformance documentation where required. - Verify dimensional and visual conformity throughout production and during final inspection. - Work closely with production and engineering to resolve quality issues and implement corrective actions. - Maintain inspection records and ensure measuring equipment is calibrated and traceable. - Ensure compliance with aerospace quality standards and customer requirements. Required skills and experience: - Proven experience as a Mechanical Inspector ideally with knowledge of the aerospace industry. - Strong understanding and practical application of GD&T. - Experience performing FAIRs/First Article Inspections. - Proficient with shadowgraph/optical comparator operation and interpretation. - Excellent manual inspection skills with precision hand tools. - Able to read and interpret engineering drawings and specifications. - High attention to detail, strong organisational skills, and clear written/verbal communication. This is a permanent job. You must have current UK right to work to be considered. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications

Section EngineerLocation: Heathrow Airport Project: Major Civil Engineering & Infrastructure Scheme The Opportunity We are seeking an experienced and highly motivated Section Engineer to join a major civils project at Heathrow Airport. This role will be responsible for the successful delivery of a significant link bridge package, including foundations, structural works, and associated civil engineering activities.Working within a live airport environment, you will play a key role in coordinating both self-delivered works and specialist subcontractors, ensuring the project is delivered safely, efficiently, and to the highest quality standards.This is an excellent opportunity to work on one of the UK's most high-profile infrastructure projects while developing your career with a leading contractor. Key Responsibilities Manage and oversee the delivery of link bridge and associated civil engineering works, ensuring compliance with programme, quality, and safety requirements. Provide technical support and engineering expertise throughout the construction phase, including design coordination and issue resolution. Review and interpret engineering drawings, specifications, and design documentation to ensure accurate project delivery. Lead setting-out activities and engineering control for self-delivered works. Coordinate and manage subcontractors, monitoring performance, progress, quality, and compliance with project requirements. Support the Site Manager and Project Team with planning, sequencing, and resource allocation. Ensure all works are carried out in accordance with health, safety, environmental, and airport operational requirements. Assist in the preparation and review of Method Statements, Risk Assessments, Inspection & Test Plans (ITPs), and quality documentation. Monitor quality standards and ensure works are completed in line with project specifications. Provide technical guidance and mentorship to Site Engineers and junior members of the team. Candidate Requirements Degree-qualified in Civil Engineering, Structural Engineering, or a related discipline. Proven experience as a Section Engineer or an experienced Site Engineer looking to progress into a Section Engineer role. Previous experience working for a Tier 1 or Tier 2 main contractor. Strong background in structural and civil engineering projects with experience overseeing construction delivery. Experience managing both direct labour and subcontractor packages on complex infrastructure projects. Excellent technical, organisational, and problem-solving skills. Strong communication and stakeholder management abilities. Good understanding of construction methodologies, temporary works, quality assurance, and health and safety requirements. Previous experience on Heathrow Airport or other major infrastructure, transport, rail, aviation, or civils projects would be advantageous. Valid CSCS Card. SMSTS or SSSTS qualification desirable. Security & Clearance RequirementsDue to the nature of the project and Heathrow Airport security requirements, candidates must: Be eligible to obtain an Airside Pass. Provide a fully checkable five-year employment history. Pass the required aviation security vetting process. Have no unspent criminal convictions. Be able to reliably commute to Heathrow Airport. The role is based at Heathrow Airport. Contract role 40 hours a week. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Quality Technician Location: Feltham Salary: £26,000 – £27,000 annual bonus (OTE up to £40,000) Hours: Monday to Thursday: 7:45am – 4:30pm Friday: 7:45am – 12:45pm (38 hours per week)The Role We are looking for a Quality Technician to join a growing engineering business in Feltham. This role involves carrying out detailed inspection and testing of components and assemblies to ensure compliance with stringent quality and ATEX standards. Key Responsibilities fo the Quality Technician Perform qualitative and quantitative inspection of raw materials and components at goods-in using measuring equipment such as jigs and gauges Inspect in-house manufactured components and machine assemblies to ATEX requirements Conduct final inspection and testing (e.g. leak tests and continuity checks) as part of sign-off procedures Carry out internal ISO audits in line with company timescales Complete supplier/vendor assessments and surveillance visits Manage non-conforming, quarantined, and returned itemsWhat We’re Looking For Previous experience in a quality inspection role within engineering/manufacturing Familiarity with measurement tools and inspection processes Understanding of ISO standards and quality systems Strong attention to detail and problem-solving skills Experience with ATEX environments (desirable)What’s on Offer Competitive salary with strong bonus potential Early finish every Friday Opportunity to work within a specialist engineering environment Career development and progression opportunitiesIf you are interested, get in touch with Charlie at Orion today to find out more and take the next step in your career! Due to the volume of applications we receive, we may not be able to respond to every applicant. If you have not heard from us within 5 working days, please assume your application has been unsuccessful. For more opportunities, please visit our website. INDMAN

Electrician Based in Feltham £45,000 + van & fuel card About Lampton Services Lampton Services is a division of the Lampton Group of companies, a Local Authority Trading Company wholly owned by the London Borough of Hounslow (LBH). The business is split into three distinct entities, Recycle 360, Greenspace 360 and Coalo. We provide a range of services, commissioned by LBH, for residents in the borough. From collecting recycling and waste, to maintaining parks, repairing and upgrading homes to managing allotments, Lampton Services is at the heart of the Hounslow community working every day to make it a great place to live. In return Lampton Services will offer you Annual pay reviews and incremental pay increases 21 days holiday allowance, plus bank holidays Free gym membership Enhanced Maternity and Paternity leave and Pension Scheme Exclusive Discounts - save with Lampton Rewards and EE mobile offers Staff wellbeing perks - online GP access, EAP, health testing, flu Jabs, and eye care vouchers Sustainability Perks - cycle to work and electric car salary sacrifice scheme Career Growth – CPD training, structured development, and leadership opportunities About The Role;- As a Qualified Electrician, you will be responsible for delivering a wide range of electrical services across our housing portfolio. Depending on business needs, you may work within one or more of our operational teams, including Responsive Repairs, Voids, Kitchens & Bathrooms (K&B), Major Works and Lampton Homes. Key Responsibilities include: Diagnose, fault find, test, repair and maintain electrical installations within domestic and communal properties, ensuring all works comply with current regulations and company standards. Carry out electrical installations, alterations, upgrades, inspection, testing, commissioning and certification of electrical systems, including partial and full rewires. Work across a range of operational workstreams including Responsive Repairs, Voids, Kitchens & Bathrooms (K&B), Major Works and Lampton Homes, depending on business requirements. Undertake electrical refurbishment and improvement works within occupied and unoccupied properties, ensuring high standards of workmanship and customer service. Install, maintain and test a variety of electrical systems including power, lighting, emergency lighting, fire alarms, ICT infrastructure and three-phase installations. Interpret technical drawings, specifications and work schedules to deliver projects safely, efficiently and to agreed deadlines. Plan and manage workloads effectively, ensuring the correct materials, equipment and resources are available to complete works within target timescales. Complete all required electrical certification and documentation accurately, including EICRs, EICs, Minor Works Certificates and other compliance records. Understand and comply with all Health & Safety legislation, company procedures, safe systems of work and asbestos awareness requirements. Work independently or as part of a team, demonstrating initiative, problem-solving skills and a professional approach with minimal supervision. Respond positively to changing priorities and emergency situations, adapting workloads to meet service demands while ensuring properties are left safe, secure and tidy. Provide excellent customer service when working within residents' homes, maintaining a professional, respectful and solution-focused approach at all times. Participate in the emergency call-out rota and provide out-of-hours support when required. Support apprentices, trainees and colleagues by sharing knowledge and promoting best practice across the electrical service. Carry out Electrical Installation Condition Reports (EICRs) and remedial works in accordance with BS7671 and company procedures. Use handheld technology and company systems to accurately update work orders, certification and job progress. About you We are looking for a qualified, motivated and customer-focused Electrician who takes pride in delivering high-quality workmanship and excellent customer service. Education & Qualifications Required: Full, clean driving licence City & Guilds 2382 (18th Edition Wiring Regulations). City & Guilds 2391 Inspection & Testing, or an equivalent qualification. NVQ Level 3 Electrical Installation including AM2, City & Guilds 2360 Parts 1 & 2, or an equivalent recognised electrical qualification. Diversity, equity and inclusion are at the heart of what we value as an organisation. Lampton Group is an equal opportunities employer and all qualified applicants will receive consideration for employment without regard to race, religion, sex, sexual orientation, age, disability or any other status protected by law. Our recruitment team are happy to support with any reasonable adjustments that are needed within the recruitment process

Warehouse Stores Assistant Length: 12 months (long term contract with possible extensions) Location: Heathrow onsite 5 days per week (Monday to Friday standard hours) Rate: £125 to £150 per day via umbrella Purpose of Role The candidate will be responsible for the efficient coordination and control of all sub project materials, inbound delivery, storage requirements, operational vehicles, plant and equipment for the airport. Key Areas of Responsibility Core Activities Understand the Company's H&S Policy and their allocated responsibilities. Lead and direct the stores activities. Ensure all supplier delivery notes are signed, dated, checked and saved within SharePoint. Report any goods receiving discrepancies to the Logistics Manager for processing and follow up. Stowage of materials ensuring materials are stored in correct project locations and stock is rotated appropriately. Perform both regular and rolling stock takes on an agreed basis and made available within SharePoint. Ensure stock counts are available on a weekly basis by project location. Maintain all stores locations and Logistics Yard, ensuring a clean, safe environment, always keeping the premises in a tidy and presentable manner. Always adhere to OH&S standards. Cable drum IDs are reported and cable stored and reported in correct manner. To conduct stores searches for missing parts and locate missing equipment when not signed out. Report any process breaches to the Logistics Manager for resolution with relevant personnel. To complete necessary weekly statutory inspections - Working at Height, LOLER, PUWER in an accurate manner as per pre agreed timescales and saved within SharePoint. Conduct monthly vehicle inspections - Vehicle Inspection, Mileage Logs and First Aid as per pre agreed timescales and saved within SharePoint. Drive company vehicles to the airport garage for 6 monthly airside checks, and to Northgate garage when required for MOT's and Service. Carry out Fulcrum and Rapid Goods Scanning bookings in line with Project timescales when required. Develop a sound level of understanding of Fujitsu Operations processes and procedures. Other duties as required by the Logistics Manager. Assist with cross training within your team. Experience, Qualifications and Attributes Experience Has 3-4 years of warehouse / stores industry experience. Experience within IT product set preferable. Has supervisory experience (preferable but not essential). Technical Experience Cabling and Physical Infrastructure product knowledge. Preferably has experience of airport equipment, systems, processes. Attributes Excellent communication skills, both written and spoken. Has a pro-active and collaborative approach to projects. Computer literate - Working knowledge of (Word, PowerPoint, Excel). Behaviours Teamwork - Works well with others. Proactive - Has a 'can-do' attitude to challenges. Communication - Actively seeks to bring a message across. Organization - Is organized and can multi task. Respect - Works with a respectful approach to both colleagues and clients. Achieving results - Works hard to make improvements. Personal accountability - Takes ownership of the works under their control and seeks to continuously improve performance standards. Attention to detail. Self-motivated. Ability to work under pressure and possess good time management skills. Creativity - Develops & implements new approaches/solutions. Flexibility around working times/hours and good time keeping.Qualifications Mandatory: Clean Driving licence / Airside Driving experience Other required training will be provided.Other Demonstratable 5 year working history to enable Airside pass authorisation. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

Quality & Snagging Inspector (M&E) – Contract Location: Heathrow Rate: £350-£400 Contract: LTC IR35: Outside M&E Quality Inspector | QA/QC Engineer | Building Services | Contract | Data Centres | Commercial Construction We are currently recruiting for an experienced Quality & Snagging Inspector (M&E) to join a leading M&E contractor on a major construction project. This is an excellent opportunity for an experienced QA/QC Engineer, M&E Quality Inspector, or Building Services Inspector to play a key role in ensuring the highest standards of mechanical and electrical installations are achieved before project handover. The Role Reporting to the Project Manager, you will be responsible for inspecting completed Mechanical & Electrical installations, identifying defects, producing snagging reports, and ensuring all works are completed to specification and in accordance with project quality standards. You'll work closely with subcontractors, supervisors, commissioning engineers and the wider project delivery team to ensure all quality issues are resolved efficiently. Key Responsibilities Carry out detailed inspections of mechanical and electrical installations. Produce and manage snagging lists across all M&E disciplines. Monitor remedial works and carry out re-inspections. Ensure all installations comply with project drawings, specifications and relevant industry standards. Review QA documentation, inspection test plans (ITPs) and commissioning records. Liaise with subcontractors and site management to ensure quality standards are maintained. Support practical completion and client handover. Maintain accurate inspection records and quality reports. Requirements Previous experience as a Quality Inspector, QA/QC Engineer, M&E Inspector, Mechanical Inspector, Electrical Inspector, or Clerk of Works. Strong understanding of Mechanical & Electrical building services installations. Experience carrying out snagging and quality inspections on live construction projects. Ability to read and interpret technical drawings and specifications. Excellent attention to detail and communication skills. CSCS Card essential. SSSTS or SMSTS desirable. Project Experience Candidates with experience on any of the following projects are encouraged to apply: Data Centres Commercial Buildings Hospitals Pharmaceutical Facilities Industrial Projects Airports Large Residential Developments Contract Details £350 - £400 per day (depending on experience) Immediate start available Long-term opportunity with potential extensions Weekly payments If you're an experienced Quality & Snagging Inspector (M&E) or QA/QC Engineer looking for your next contract opportunity, we'd like to hear from you. Apply today with your CV or contact us for a confidential discussion

My client one of the UKs largest Facilities Management companies are looking for an Electrical Engineer in the Cambridge area.About the roleWe are looking for an Electrical Engineer in the Cambridge area doing PPMs, reactive works etc.Principal Accountabilities• Carrying out PPMs and reactive maintenance• Emergency lighting test• Power distribution• Fault-finding• Test and Inspection• Provide a reactive and proactive maintenance serviceMust have 18th edition, C&G Level 3 Electrical Installations and AM2.Monday - Friday, 40 hours per week.A minimum of 5 years experience as an Electrical Engineer in the FM & Maintenance sector.The role is temp to perm and is paying up to £37 per hour Umbrella or £28 per hour PAYE.If you deem yourself suitable for this position. Please apply Immediately.TPBN1_UKTJ

Senior Engineer Location: Acton, West London Sector: Data Centres Salary: £68,000 – £75,000 + Package The Opportunity An excellent opportunity has arisen for an experienced Senior Engineer to join a specialist contractor delivering a major hyperscale data centre development in West London. This is a technically demanding project involving two new data centres, an office building, substation infrastructure, extensive utility diversions, remediation works and complex construction sequencing. You will take ownership of the day-to-day engineering delivery of allocated packages, working closely with construction, design and quality teams to ensure works progress safely, efficiently and in line with approved information. It is a strong opportunity for an engineer who enjoys taking responsibility on site, solving technical challenges and contributing to the successful delivery of a high-profile scheme. Role Overview You will provide technical leadership across allocated construction packages, supporting site teams with the information, coordination and engineering input required to maintain productivity. The role will involve managing technical queries, coordinating temporary works and design interfaces, monitoring engineering progress and ensuring inspection and testing requirements are completed correctly. You will also help identify engineering constraints ahead of construction, support workface planning and ensure accurate project records are maintained throughout delivery. A key focus will be on achieving first-time quality, reducing defects and rework, and ensuring completed packages are supported by clear and accurate handover information. About You You will have experience delivering engineering activities on major construction or infrastructure projects, together with a strong understanding of construction methods, sequencing and technical coordination. You should be comfortable managing RFIs, engineering records, inspections and technical issues in a live project environment. Previous exposure to temporary works is important, while data centre experience would be particularly advantageous. A degree in Civil, Structural, Mechanical or Electrical Engineering is required, alongside a CSCS Manager Card. Candidates working towards Chartered Engineer status are encouraged to apply. What’s in it for you? The role offers a salary of £68,000 – £75,000 alongside a comprehensive benefits package including a car allowance, competitive pension, electric vehicle scheme, private healthcare and cash plan, eyecare vouchers and a cycle-to-work scheme. You will also receive 25 days’ annual leave plus Bank Holidays and an additional day off for your birthday, together with genuine opportunities for progression on major technical projects

An exciting opportunity has arisen for an experienced Registered Manager to lead a high-quality Children's Residential Home with a provider committed to delivering exceptional care and achieving outstanding outcomes for young people. This is a fantastic opportunity for a passionate leader who thrives on developing high-performing teams, maintaining regulatory excellence and creating a safe, nurturing environment where children can flourish. The Role Lead the day-to-day management of an Ofsted-regulated Children's Residential Home. Drive a positive, child-centred culture focused on achieving outstanding outcomes. Ensure full compliance with Children's Homes Regulations and Quality Standards. Lead, motivate and develop a dedicated residential care team. Champion safeguarding and promote the highest standards of care. Build strong relationships with local authorities, families and external professionals. Maintain inspection readiness and drive continuous quality improvement. Manage staffing, budgets and operational performance. About You We're looking for someone who has: Previous experience as a Registered Manager or an experienced Deputy Manager ready to step up. Eligibility to register with Ofsted. Level 5 Diploma in Leadership and Management for Residential Childcare (or working towards). Excellent knowledge of Children's Homes Regulations and Quality Standards. Strong leadership and people management skills. A proven commitment to safeguarding and improving outcomes for children. If you're looking for an opportunity to shape a service, develop an outstanding team and genuinely make a lasting difference to children's lives, we'd love to hear from you. For a confidential discussion, please contact Cityworx Recruitment Solutions

Graduate Quality Engineer Ferrovial Construction is looking for Graduate Quality Engineers to assist with, and in some cases be responsible for, day to day activities on a variety of major UK infrastructure projects. The Ferrovial 2-year graduate development programme is designed to develop personal, professional and technical skills through a blended approach. You will work under the supervision of Quality Managers. Key Responsibilities Contribute to the achievement of Health and Safety in accordance with company policy and ensure Quality standards on our projects are upheld. Key Accountabilities To assist in writing and reviewing quality documentation including Quality Management Plans and Inspection and Test Plans. To support the development of briefing and communication strategies to ensure quality plans and important information is understood and operated by all employees and subcontractors. To assist in monitoring compliance of construction works on site and relevant documentation in accordance with Works Information (including design drawings), Ferrovial standards and relevant Technical Standards. To assist in carrying out reports for the senior Quality team. To support the Project Quality Manager with investigations and audits. Provide guidance on quality requirements and best practice, promoting continuous improvement and innovation across the site team and the business. Promote Ferrovial Construction UK’s vision and values, while taking ownership of your assigned work. Adhering to safe working practice regulations on-site and ensuring that all staff comply with the same. Support Ferrovial Construction Environmental and Sustainability policies and procedures. Skills and Competence We are looking for graduates with: Excellent communication skills and ability to interact at a variety of levels Excellent written and oral English language Degree or Masters (All disciplines considered) Must have right to work in the UK by the start of employment Motivated to learn and add value to the team, the role and the Graduate programme Analytical thinker who enjoys problem solving. A proven team player who can effectively work with others. Enjoys working under pressure to meet deadlines Proactive approach to working and learning Commercial awareness and an understanding of the industry. Familiar with all Microsoft packages Technical Knowledge (Civil, Mechanical and / or Electrical) Interpersonal Skills: Logical thinker with a willingness to learn Resilient and a flexible approach to working Results driven with strong communication skills Work independently with minimal supervision Desirable Knowledge of Health and Safety Legislation Quality experience and CSCS Card Essential: Must have right to work in the UK by the start of employment and throughout the entirety of the graduate program. What we offer: On the Ferrovial Construction Graduate programme you will get: 2-year development programme Exposure to a diverse range of engineering disciplines Work with Contractors and Sub-contractors to develop effective partnerships Attend a variety of blended training to develop your technical, professional and behavioural skills You will start the process of becoming chartered with internal and external support You will either be given a project to work on or be assigned to a small “Package” to manage the quality assurance requirements from start to finish Gain an understanding of Ferrovial Construction from a global perspective, with mobility opportunities Other details The position is scheduled to start in September 2026 at the latest, if you wish to start earlier, we can accommodate this. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial Construction UK is an Equal Opportunities employer and as such treats applications equally and recruits purely based on skills and experience. We are committed to building an inclusive team from a variety of different backgrounds, perspectives and skills so we encourage candidates from underrepresented groups to apply

Mechanical Building Services Engineer (Foot Mobile) ?? Central London?? Competitive Salary + Travel Card + Overtime + 1 in 4 Call-Out + Excellent BenefitsJoin Sowga Building Services, Delivered Better. At Sowga , part of the Pareto FM Group, we're proud to deliver first-class building services across some of Central London's most prestigious commercial properties. Our engineers are at the heart of everything we do, and we're committed to creating an environment where people feel supported, valued and able to build long-term careers.Due to continued growth, we're looking for an experienced Mechanical Building Services Engineer to join our Foot Mobile engineering team.This is an excellent opportunity for a mechanically biased engineer who enjoys variety, problem solving and working within a collaborative team. You'll maintain a portfolio of high-quality commercial buildings across Central London, delivering both planned and reactive maintenance while building strong relationships with clients and colleagues.The Opportunity Reporting to the Contract Supervisor and Contract Manager , you'll become part of a supportive team responsible for delivering exceptional maintenance services across a prestigious client portfolio.You'll carry out planned preventative maintenance (PPM), reactive maintenance, fault finding and minor repairs across a wide range of mechanical building services systems, helping to ensure our clients' buildings remain safe, compliant and operating efficiently.Every day is different, offering the opportunity to work across multiple sites while developing your technical knowledge and building a rewarding career with a growing business.What You'll Be Doing Deliver planned preventative maintenance (PPM) across commercial buildings.Respond to reactive maintenance requests and diagnose faults.Carry out repairs and minor installation works across mechanical building services.Maintain HVAC systems and associated plant equipment.Monitor and use Building Management Systems (BMS) for first-line diagnostics.Complete maintenance reports and compliance documentation accurately.Build strong relationships with clients through excellent customer service.Ensure all work is completed safely and in line with statutory compliance requirements.About You You'll be a proactive engineer who enjoys working independently while being part of a supportive engineering team.Essential NVQ in Plumbing, Mechanical Engineering or Building Services (mechanical bias).Experience within commercial building maintenance or facilities management.Strong fault-finding experience across mechanical building services.Experience carrying out planned and reactive maintenance.Good understanding of Health & Safety and safe systems of work.Excellent communication and customer service skills.Experience working with equipment such as:HVAC systemsBoiler plantPumpsVentilation systemsPressurisation systemsPlumbing systemsBuilding Management Systems (BMS)Desirable 18th Edition Wiring Regulations.City & Guilds 2391 Inspection & Testing.IOSH Working Safely.PASMA.IPAF.ACOP L8 knowledge.High Voltage (HV) awareness or qualifications.Why Join Sowga? At Sowga, we recognise that great engineers build great client relationships. That's why we invest in our people, provide ongoing support and create genuine opportunities for career progression.From day one, you'll be welcomed into a knowledgeable and collaborative engineering team where your experience is valued and your development is encouraged.What's on Offer Competitive salary.Company travel card.Overtime opportunities.Approximately 1 in 4 call-out rota following successful completion of probation.Ongoing technical training and professional development.Clear progression opportunities into Supervisor and Contract Management roles.Support from experienced engineering leaders and a collaborative team environment.Opportunity to work across some of Central London's most prestigious commercial buildings.If you're an experienced Mechanical Building Services Engineer looking to join a growing business that values quality, teamwork and career development, we'd love to hear from you.TPBN1_UKTJ

Brief Summary: Are you an experienced HGV Technician or PSV Technician looking for your next challenge? We are recruiting skilled engineers in the Heathrow / Hillingdon area to work the desirable 4 Days On / 4 Days Off shift pattern (12 hour shifts), maintaining modern fleets that keep the capital moving safely and reliably every day. Whether you have current PSV experience or are looking to transition from HGVs, we'd love to hear from you. The Role: As a PSV Technician, you'll play a vital role in ensuring vehicles are maintained to the highest standards of safety, reliability and performance. Working alternating early and late shifts you’ll be working within a well-equipped workshop where you'll carry out scheduled servicing, inspections, diagnostics and repairs to minimise vehicle downtime and maximise fleet availability. Key Responsibilities: Carry out routine servicing, maintenance and repairs on buses and coaches. Diagnose and rectify mechanical, electrical and pneumatic faults. Complete safety inspections and preventative maintenance in line with manufacturer and DVSA standards. Prepare vehicles for MOT testing and ensure they remain fully roadworthy. Respond to breakdowns and carry out repairs efficiently. Use diagnostic equipment to identify and resolve faults. Accurately complete maintenance records and job documentation. Maintain a clean, safe and organised working environment. Work collaboratively with the engineering team to achieve fleet availability targets. Ensure all work is completed in accordance with Health & Safety policies and company procedures. What We're Looking For: NVQ Level 3, City & Guilds, IMI or equivalent qualification in Heavy Vehicle Maintenance and Repair. Previous experience working on PSV, HGV, LGV or other heavy vehicles. Strong diagnostic and fault-finding abilities. Good understanding of electrical, hydraulic and pneumatic systems. Ability to work independently as well as part of a team. A proactive attitude with a commitment to delivering high-quality workmanship. PSV licence is advantageous but not essential. What's On Offer: £26.40 Per Hour / £57,700 Per Annum (Level 3 Technician) Overtime opportunities. Ongoing manufacturer and technical training including High Voltage Training & IRTEC Inspection Accreditation. Career progression within a well-established organisation. Modern workshop facilities and equipment. Company pension. Generous holiday entitlement. Employee assistance programme. Free TfL Travel Pass If you're a skilled PSV Technician or HGV Technician looking to join a professional engineering team where your experience is valued and your career can progress, we'd love to hear from you

Company Description About Monitoring and SurveyingSOCOTECs Monitoring and Surveying teams deliver market-leading monitoring, surveying and data collection services across the UK. With over 30 years of experience, we support major infrastructure, construction, utilities and environmental projects through land and utility surveying, gas and asset surveys, flow and water quality monitoring, and advanced geotechnical and structural monitoring. Using industry-leading technology and real-time data, we help clients reduce risk, protect critical assets and make safe, informed decisions. Our people-focused, can-do culture puts safety, quality and customer excellence at the heart of everything we do.What's in it for you?Your expertise deserves recognition. Alongside a competitive salary, we offer a comprehensive benefits package including 25 days holiday (with the option to buy more), an electric car scheme (where applicable), employee recognition programmes, family-friendly support, exclusive retail discounts, employee assistance programmes, and an enhanced company pension. SOCOTEC UK & Ireland are proud to be Disability Confident accredited.Job Description Monitoring Surveyor Acton, LondonPermanent and 6-Month Fixed-Term Contract Opportunities AvailableAre you interested in engineering surveying and structural monitoring? This could be your opportunity to excel as a Monitoring Surveyor, playing a vital role in supporting SOCOTEC's continued success.As SOCOTEC grows, so do our teams. We're looking for dedicated Monitoring Surveyors to join our Monitoring & Surveying Division, with both permanent and 6-month fixed-term contract positions available . This is an opportunity to become part of a growing team and wear the SOCOTEC badge with pride.We are seeking proactive, reliable, and flexible Monitoring Surveyors to join our Monitoring & Surveying team. In this role, you'll need the confidence to work independently, alongside the ability to collaborate effectively as part of a team. A background in engineering surveying or civil engineering, together with knowledge of construction, infrastructure, rail and monitoring survey techniques, is essential to thrive in this position.The tasks you will undertake will include (but are not limited to):Organising and delivering site-based engineering surveys and manual monitoring activities.Carrying out precise movement monitoring surveys.Undertaking precise traversing and levelling for survey control.Completing railway track surveys.Producing survey plans and section drawings using AutoCAD or similar software.Conducting as-built surveys.Preparing reports using Microsoft Word and Excel templates.Liaising with clients and colleagues to provide project updates and ensure successful project delivery.Maintaining the highest standards of health, safety, quality and environmental compliance on site.Qualifications To be a successful Monitoring Surveyor , you should be able to demonstrate:A qualification in Surveying, Civil Engineering or a related discipline.Experience using Leica surveying equipment, including Total Stations, GPS receivers and precise levels.Proficiency with AutoCAD and Microsoft Office.Demonstrable experience within engineering surveying or monitoring surveys.Excellent communication skills and the ability to work both independently and as part of a team.Strong attention to detail with the ability to prioritise work in a fast-paced environment.A full UK driving licence.Desirable skills include:Experience using MicroSurvey StarNet and N4CE Survey Software.Knowledge of geotechnical and structural instrumentation.Experience working within construction, tunnelling or rail environments.CSCS, PTS and Sentinel ICI-LU accreditation.Additional Information Why SOCOTEC?Join a thriving community of over 2,000 industry professionals who are passionate about making a real difference. At SOCOTEC UK, we're not just delivering services - we're shaping the future of testing, inspection, and certification across the nation.What sets us apart? Our people. We've built our reputation on attracting exceptional talent like you and empowering them to deliver excellence at every turn. Our comprehensive range of TIC services means you'll have the opportunity to work on diverse, challenging projects that truly matter.In this role, you won't just be another employee - you'll be a key player in our continued success story. Your expertise will directly contribute to our mission of building a safer, more sustainable world, while you grow your career alongside some of the industry's finest professionals.Your Career, Your WayBuild a traditional career path or explore opportunities across multiple disciplines - all within SOCOTEC. Your choice, your direction.Work Your WayLocal, national, or global projects. Office-based, remote, or hybrid. We offer the flexibility that empowers you to perform at your best.Committed to Your GrowthFrom day one, you'll have access to comprehensive training, mentorship, and development programs. We support every step of your professional journey. #YouGrowWeGrowThink you've got what it takes to add value to our success? We would love to hear from you and look forward to receiving your application.Building a safer and more sustainable world is the core mission we set out to achieve at SOCOTEC, it is at the heart of everything that we do. We are committed to acting as a key player in society, investing in innovative solutions to ensure social and environmental concerns are at the forefront of all of our business operations.TPBN1_UKTJ

SEN Teaching Assistant - Feltham - SEN School - £95-£115 a day (depending on experience) - Full Time - Immediate Start SEN Teaching Assistant - Previous experience supporting pupils with SEN required SEN Teaching Assistant - Experience working with autism, ADHD, SLD, PMLD or complex needs desirable SEN Teaching Assistant - Must be confident supporting communication, behaviour and learning SEN Teaching Assistant - Required full time ASAPHave you previously worked as a SEN Teaching Assistant? Do you have experience supporting pupils with additional or complex needs? Are you able to commute easily to Feltham? If yes, then this SEN Teaching Assistant role is for you!!! The Role - SEN Teaching Assistant Seeking a patient and proactive SEN Teaching Assistant to support pupils aged 4-19 within a specialist SEN setting. You will work closely with teachers, therapists and support staff to provide 1:1 and small-group support, helping pupils access learning and work towards their EHCP outcomes. The role involves supporting pupils with autism, ADHD, severe learning difficulties, profound and multiple learning difficulties and associated communication needs, promoting independence, encouraging positive behaviour and contributing to a structured and inclusive learning environment where every pupil can thrive. The School - SEN Teaching Assistant This specialist provision is located in Feltham within the London Borough of Hounslow and is within walking distance of a nearby National Rail station. The school supports pupils with a range of complex special educational needs and provides personalised learning, therapeutic support and a nurturing environment focused on communication, independence and life skills development. The school was judged 'Good' at its most recent Ofsted inspection in 2023. Apply here for this SEN Teaching Assistant role or contact Brandon at Qualiteach for more information

Electrical Controls & Instrumentation EngineerSalary: £55,000 basic night shift allowance, on-call payment and overtime available (realistic earnings £65,000)Due to a growing pipeline of work, we're looking for an Electrical Controls & Instrumentation Engineer to join a busy maintenance team supporting three major contracts.Working within a highly skilled maintenance team, you'll be responsible for planned preventative maintenance, reactive maintenance, controls support and instrumentation activities across critical facilities. The role combines both day and night shifts and offers excellent earning potential through overtime and on-call responsibilities.Details about this Electrical Controls & Instrumentation Engineer role:Planned and reactive maintenance on electrical, controls and instrumentation systems.Working across both day and night shifts (4 nights per week - between 12am-4am - nice short shift!!).Planned shutdown work carried out between 12am-4am.Ensuring SLA targets are met on maintenance activities.Fault finding on dampers, flow switches and other instrumentation equipment.Remote and on-site support as part of an on-call rota after around 3 months - Approximately 90% of issues are resolved remotely.Controls Experience Required for this Electrical Controls & Instrumentation Engineer role:PLC fault finding and troubleshooting (essential).SCADA experience or exposure (essential).HMI and I/O knowledge highly desirable.PLC programming experience would be a significant advantage.Requirements for this Electrical Controls & Instrumentation Engineer role:NVQ Level 3 Electrical or equivalent.18th Edition (essential).City & Guilds 2391 Inspection & Testing (preferred).LVAP experience.Full UK Driving Licence.Strong hands-on electrical maintenance background.Interview Process for this Electrical Controls & Instrumentation Engineer role:Teams interview.Personality assessment.On-site practical assessment.Click Apply, or contact Jamie Garcia - Courtice for more info:Thank you for your application. Due to the volume of applications, we cannot respond to everyone personally. If you haven't heard back within 5 working days, please assume your application has been unsuccessful. To view other vacancies, please visit our website.Ref: INDMIDTPBN1_UKTJ

Electrical Testing & Remedial Works Engineer – London | Up to £47k ⚡ Looking for a career where your skills are valued, your growth is supported, and your work really matters? We’ve got the role for you! What’s in it for you? Competitive salary up to £47,000 per year Plus overtime paid at time and a half evenings & Saturdays and double time on Sundays available every month 🚗 Company vehicle + fuel card + private mileage allowance 🏥 Private healthcare contribution 🌴 Increasing holiday allowance 🛠️ Full training, upskilling, and support to gain additional electrical qualifications 📈 Real career progression in a supportive team The Role: Work across domestic and commercial properties in London, mainly in social housing and local authority sectors. Conduct EICRs, fix issues on the spot, and complete full rewires for non-compliant properties. You’ll Need: Strong testing & inspection skills Experience diagnosing and fixing electrical faults L3 Electrical Installations Diploma & City & Guilds NVQ Level 3 (or equivalent) 18th Edition Wiring Regs & Inspection & Testing (C&G 2391-51) Full UK driving licence Why Join? Be part of a team that cares, supports, and invests in your growth. Gain new qualifications, upskill while you work, and enjoy real career progression in a safe, rewarding environment. Ready to take the next step? Apply today and power up your career

Senior Engineer£68,000£75,000 + BenefitsWest LondonFull-Time / PermanentA major construction programme in West London is underway, involving demolition, remediation, heavy utilities and the build-out of new large-scale facilities. Were looking for a Senior Engineer who enjoys being close to delivery; solving problems, supporting site teams and making sure the job is built right first time.YOUR NEW ROLEDaily engineering support to site teamsWorkface planning, sequencing and readinessManaging RFIs, technical queries and temporary works interfacesImplementing inspection and testing requirementsMaintaining accurate engineering records and documentationABOUT YOUEngineering experience on major construction or infrastructure projectsStrong understanding of construction methodology and sequencingTemporary works awarenessDegree in Civil, Structural, Mechanical or Electrical EngineeringCSCS Manager CardData centre experience beneficial but not essentialSALARY AND BENEFITS£68,000£75,000Car allowancePension schemeEV schemeBUPA healthcare25 days holiday + Bank Holidays + Birthday offReference Number: SE-WL-11To be considered for this position or other opportunities, contact Tash Johnson at Equal Resourcing Ltd or click "Apply Now."Equal Resourcing Ltd is serving as a recruitment agency for this job opening. Your application implies your consent for us to process your data and communicate with you concerning this application and associated services, in compliance with GDPR regulations.Equal Resourcing Ltd may use AI-assisted tools to support internal administrative tasks and document drafting. We do not upload personal data or use AI tools to make hiring decisions.Our client can only consider applications from candidates with a valid legal right to work in the United Kingdom.To view a list of job openings, please visit the Equal Resourcing Ltd website.Please note that not all recruitment positions are listed. For the most current opportunities, we recommend contacting us directly.TPBN1_UKTJ

ENGINEER SURVEYORJob Title: Engineer Surveyor (Lifting & Crane Equipment)Location: Covering the London Area (Must Live within the M25)Salary: Basic from £50,750 (includes London Weighting) plus Car Allowance and a Excellent Benefits PackageShift: Days, Monday – Friday, Flexible Working HoursJob Role of the Engineer Surveyor.A standout opportunity has become available for a Engineer Surveyor to join a leading inspection consultancy. Our client is looking for Engineers with a background of working on or with equipment such as forklifts, mobile elevated working platforms, passenger lifts and cranes and looking for something different in their career.You will be responsible for inspection to help identify defects and help prevent potential, avoidable defects and complete detailed reports.You will be required to make sure all customers are compliant with LOLER / PUWAR regulations and provide excellent levels of customer service.Sector – Inspection (Field Service)Non-Negotiable Requirements of the Engineer SurveyorMinimum Level 4 or HNC Engineering based qualification.Hands on experience with or on different pieces of lifting equipment including forklifts, platforms, passenger lifts, cranes, plant equipment (diggers, dumpers), military vehicles or aircraft.Requirements for the Engineer SurveyorStrong mechanical fault-finding skills.Experience working on or with various pieces of lifting equipment within manufacturing, military, marine, distribution or field service environments.Must live within the M25.Desirable Requirements for the Engineer SurveyorExcellent knowledge of LOLER/PUWAR Regulations.The Engineer Surveyor will benefit from:Employment with a stable and well-established organisation.Competitive benefits package (Worth £60,776 with Basic Salary).Excellent, ongoing training and development opportunities. 95% of the management team within the organisation have developed from a Surveyor position.Paid from door to door and working Monday – Friday on flexible working hours.If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.For further details contact Andrew McFarlane at Pioneer SelectionAs a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.TPBN1_UKTJ

Electrical Project Manager North West / West London | HS2 / Rail Infrastructure | Permanent £100,000 - £120,000 + package Package to include car allowance, travel expenses, bonus, private medical insurance, pension, 25 days holiday + bank holidays, laptop and phone. This is a role for an Electrical Project Manager who understands that rail infrastructure is not the same as standard commercial M&E. You will be working across major HS2-related infrastructure sites in North West and West London, delivering electrical services across shafts, headhouses, tunnel interfaces, crossover areas, evacuation routes and safety-critical plant spaces. The works include locations such as Victoria Road Crossover Box and Ancillary Shaft in North West London, Copthall Green Tunnel sites in Hillingdon and Northolt Tunnel ventilation shafts and headhouses around Ealing. The project involves power, ventilation, lighting, emergency access systems and associated services that support the tunnel infrastructure feeding into Old Oak Common and the wider HS2 route. This is not a trackside role and PTS is not required, but rail or infrastructure experience is important. The project needs someone who understands controlled access, permits, interface management, sequencing around civils works, documentation, safety systems and the level of planning needed when electrical services are being delivered into tunnels, shafts and operationally sensitive areas. What you’ll be doing Taking responsibility for the electrical delivery of major HS2-related rail infrastructure works across North West and West London. Managing electrical services associated with shafts, tunnel interfaces, crossover box areas, tunnel headhouses, ventilation shafts, evacuation points, plant areas, access routes, life safety systems and associated infrastructure spaces. Supporting the delivery of power, ventilation and lighting services to areas such as the Victoria Road Crossover Box and Ancillary Shaft, allowing trains to switch tracks underground before reaching Old Oak Common. Coordinating essential electrical services, power and ventilation installations across tunnel headhouses and ventilation shaft sites around Hillingdon. Managing electrical systems linked to tunnel ventilation, lighting and emergency access across ventilation shafts and headhouses around Ealing and the Northolt Tunnel route. Coordinating installation works across containment, LV distribution, small power, lighting, emergency lighting, fire alarm, communications, security, controls, earthing, bonding, temporary supplies, tunnel services and specialist rail-related electrical systems. Working closely with the wider project team, including construction managers, supervisors, engineers, design teams, commissioning teams, commercial staff, client representatives, main contractor teams and specialist subcontractors. Managing programme, procurement, labour, subcontractors, RAMS, permits, technical submissions, RFIs, progress reporting, QA, snagging and handover documentation. Making sure electrical works are properly planned around access restrictions, shaft logistics, tunnel interfaces, civils sequencing, temporary works, lifting operations and other trades. Driving subcontractors on site while keeping control of quality, safety, programme and technical coordination. Supporting design reviews, buildability discussions and technical problem solving before issues affect delivery. Managing testing, commissioning readiness and handover requirements across electrical, life safety, tunnel support and infrastructure systems. Keeping a tight grip on documentation, approvals, inspection records, test certification, as-built information and O&M requirements. What you’ll need Previous experience as an Electrical Project Manager, Electrical Package Manager, Senior Electrical Project Engineer or Electrical Construction Manager on technically demanding projects. Experience within rail, infrastructure, tunnelling, stations, transport, utilities, aviation, energy, data centres, pharmaceutical, healthcare or another highly controlled M&E environment. Rail experience would be strongly preferred. HS2, London Underground, Network Rail, Crossrail, station upgrades, tunnel works, shafts, headhouses, evacuation routes or major transport infrastructure would all be relevant. PTS is not required, but you will need to understand the discipline that comes with working in a safety-critical infrastructure environment. Strong technical knowledge of electrical building services and infrastructure systems, including containment, LV distribution, lighting, life safety, fire alarm, communications, security, controls, earthing, bonding and commissioning processes. The ability to coordinate around civils, structural works, access restrictions, temporary works, logistics, permits, lifting operations, confined or restricted-access areas and multiple subcontractors. Good commercial awareness, with the ability to manage procurement, change, variations, programme risk and subcontractor performance. Strong communication skills and the confidence to work with main contractors, clients, consultants, designers, commissioning teams and site delivery teams. SMSTS, CSCS or ECS and First Aid would be expected. Why this role This is a chance to take on a serious electrical project management role within one of the UK’s most important infrastructure programmes. You will be working across technically demanding tunnel and shaft environments where planning, coordination and technical judgement matter. The role will suit someone who has already delivered electrical services in rail, infrastructure or another highly controlled setting and wants to step into a project with genuine scale, complexity and long-term value. For an Electrical Project Manager with strong site delivery experience and enough rail understanding to operate properly in this environment, this is a strong move. Apply now or get in touch for a confidential conversation

Job Title: GSE Technician Location: Heathrow Hours: 4on 4off – 6am to 6pm OR Monday to Friday 9am to 530pm About your new company: My client, a market leading company who have been in business for over 35 years, are looking for a GSE Technician to join their team in Heathrow. Key Responsibilities for this GSE Technician role: Carry out repairs and maintenance on vehicles and plant equipment as instructed by the Workshop Supervisor. Perform inspections, brake tests, and smoke tests; report all defects to the Workshop Supervisor before starting repairs or booking parts. Diagnose faults and communicate required work and parts to the Workshop Supervisor prior to commencing repairs. Accurately complete job cards and inspection sheets, updating progress to the current point of repair, and submit them at the end of each shift. Record all non-productive time on the appropriate job card for authorisation. Notify the Workshop Supervisor immediately of any additional work or parts required. Present job cards to the stores team to enable parts supply, and ensure all booked parts are correctly recorded. Report any VOR (Vehicle Off Road) parts requirements without delay. Label and store parts correctly (e.g. warranty items, exchange units) and ensure out-of-hours parts use is properly documented. Notify the Workshop Supervisor as soon as jobs are completed. Quarantine, label, and report defective tools or equipment immediately. Submit accurate manual timesheets at the end of each shift.What the successful GSE Technician will need: Experience in vehicle maintenance and repair, preferably within an operational or logistics environment Proven background in a customer-focused or service delivery role Strong mechanical knowledge and understanding of motor vehicle systems Analytical and numerate with effective communication skills Customer-focused with a service delivery mindset Solid understanding of Health & Safety regulationsIdeal qualifications for this position: Level 3 Light Vehicle Maintenance and Repair qualification (essential) HGV licence (desirable) Forklift licence (desirable)What is on offer: 6% employer pension contribution 3x salary Life Assurance Private Medical coverage for you and family Employee Assistance Programme (EAP)How to Apply Interested? For more details or to discuss your next career move, contact Macy at Kemp Recruitment on (phone number removed) Reference: INDMM

Quality Inspector – Rolling Stock Location: Acton, West London Rate: £37 – £50 per hour (Umbrella) Contract: Inside IR35 We are supporting a leading transport organisation in recruiting a Quality Inspector to join a major rolling stock improvement programme in London. Key Responsibilities • Carry out quality inspections and assurance activities across an overhaul production line, • Ensure compliance with technical specifications and standards, • Support document control processes, • Conduct supplier visits for product inspections and quality reviews, • Identify non-conformances and support corrective actions Requirements • Experience in Quality Inspection/QA within engineering, rail, or manufacturing, • Strong understanding of inspection processes and documentation, • Ability to read technical drawings and specifications, • Experience with supplier inspections or audits, • Rolling stock or rail experience desirable We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on 02392 228232 or email your CV and covering letter to marika.powell@arm.co.uk.

Pipe Quality Inspector Location: TeessideContract: Until October 2026Rate: £500 - £600 per day (Outside IR35)Start Date: ASAP ARM is recruiting for an experienced Pipe Quality Inspector to join a major carbon capture and storage (CCS) project on Teesside. This is an excellent opportunity to play a key role in ensuring the quality and integrity of pipe materials on one of the UK's flagship energy transition projects. The Role Working closely with the Project Logistics Manager, you will be responsible for inspecting pipe materials, identifying damage or quality issues, and ensuring all equipment is received, stored and handled in accordance with project and client requirements. Key Responsibilities • Carry out inspections of pipe materials prior to installation., • Verify that all delivered materials are free from damage and accompanied by the correct documentation., • Identify, record and report any damage or discrepancies, coordinating with logistics and supply chain teams to implement corrective actions., • Maintain accurate inspection and subcontractor service records., • Raise Service Entries and Work Orders to support project processes and payment approvals., • Liaise with supply chain, logistics and client representatives to coordinate the movement of materials.

A standout opportunity has become available for a Engineer Surveyor to join a leading inspection consultancy. Non-Negotiable Requirements of the Engineer Surveyor. Requirements for the Engineer Surveyor.

This role would suit a Site Electrician with C&G 2391 Test & Inspection certificate and a valid ECS card looking for expert training to become a fully autonomous site Service Engineer. Keywords: Electrician, Service, Engineer Electrical, Automation, Automated, Construction, Site, Commercial,