Trabajos machine operator en HalifaxCrear alertas

Overview \n Taskmaster are looking for an experienced CNC operator to join our client based in Cleckheaton, BD19. \n 8am - 4:30pm Monday to Thursday \n 8am - 3pm Friday \n Pay rate ranging from £14.00 - £16.00 DOE \n Overtime available \n Experience required \n Responsibilities \n\n • Working on an XYZ CNC Machine with Siemens controls\n, • Working on a semi-automated CNC machine\n, • Turning and Milling\n, • Working as a team to complete tasks\n\n Qualif... \n \n ZIPC1_UKTJ

SCM Beam Saw Operator Location: Halifax Salary: Dependent on experience Hours: Monday–Thursday, 6:00am–5:00pm | Friday, 6:00am–12:00pm (46 hour per week) Job Type: Full-time, Permanent The Role We are currently recruiting for an experienced Beam Saw Operator to join a well-established panel processing and furniture manufacturer based in Halifax. This is a full-time, permanent opportunity for someone with previous beam saw experience who takes pride in producing accurate, high-quality work. Working as part of a two-person team, you will operate an SCM beam saw, cutting a variety of sheet materials to optimised cutting lists while maintaining quality, productivity and minimal material waste. Key Responsibilities - Set up and operate an SCM beam saw to produce accurate panels from MFC, MDF, chipboard, plywood and laminated boards - Read and work from cutting lists, optimisation patterns and technical drawings - Load and unload sheet materials safely - Check dimensions, squareness and finish quality of completed panels - Label and stack cut components ready for the next stage of production - Change and set saw and scoring blades when required - Carry out routine daily checks and basic machine maintenance - Report faults, downtime and material shortages to the Production Supervisor - Maintain a clean, organised and safe working environment - Follow all health & safety procedures and PPE requirements - Support other areas of production when required About YouWe are looking for someone who has: - Previous experience operating a beam saw - SCM beam saw experience would be a strong advantage, although experience with Holzma/Homag, Biesse, Giben or similar machinery will also be considered - An understanding of cutting optimisation software - Good numeracy and accurate measuring skills - Strong attention to detail and a focus on quality - A reliable and punctual approach to work - The ability to work effectively both independently and as part of a team - A forklift licence would be advantageous but is not essential Interested? If you have experience operating beam saw machinery and are looking for a permanent opportunity with a growing manufacturing business in Halifax, apply today with your CV for immediate consideration.

Machine / Production Operative – 6 Month Contract \n Location: Desford, Leicestershire \n Pay Rate: £17.98 per hour \n Contract: 6 Month rolling contract \n Shift Pattern \n 4 on / 4 off rotating days and nights \n\n • Days: 5:30am – 6:00pm\n, • Nights: 5:30pm – 6:00am\n\n The Role \n We're looking for a experienced Machine / Production Operatives to join a brand-new manufacturing facility in Desford. \n Working within the cutting and pallet... \n \n ZIPC1_UKTJ

CNC Miller Programmer We are working with a prestigious client who specialise in subcontract engineering and they are based in West Yorkshire produce high tolerance precision components, manufactured to exacting customer requirements. My client are actively seeking experienced CNC Miller Programmer to join their business. Key skills required from the CNC Miller Programmer: Must have experience as a CNC Miller setter Operator over 4 years You must have working experience of Haidenhain Ability to write programs from scratch for Haidenhain Experience operating vertical milling machines Experience machining exotic or hard-to-machine materials such as Inconel or Nitronic Confident in fixture setup, tooling selection, and work offset setting Strong understanding of cutting tools and advanced machining practices Ability to work accurately to tight tolerances The successful CNC Miller will be rewarded with an excellent hourly rate, free onsite parking and other benefits to be confirmed. Hours of Work 7-3.30pm Friday 7-1pm on Friday = 38 hour Please send your CV to Zabina @ Quest Technical Ltd for immediate consideration

Our client is a well-established and successful manufacturer. They are looking for someone with good hands on manufacturing and production experience to join them as a Fabrication Operative / Tube Manipulator. This role will become permanent after successfully completing 3 months full work as a temporary agency worker. Shift pattern: 6.00am – 2.00pm / 2.00pm – 10.00pm (rotating every 2 weeks) Salary: £14.73 per hour (£12.95 basic + 13.75% shift allowance) + Overtime at time and a half, or double time (based on the basic) depending on the amount over overtime worked. Location: Holmfield HX2 PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Experience of tube bending and stud welding will be a definite advantage, but not essential Previous experience in a hands-on role in a manufacturing / production / factory / engineering environment You must have experience of using a wide variety of hand tools and power tools You are able to follow diagrams and engineers instructions to manufacture products. You can start ASAP, or with a very short notice period Duties and Responsibilities: Manual tube bending, cutting, and fabrication Stud welding Following engineering drawings and technical instructions Utilising hand and power tools whilst maintaining consistent quality Any other duties as reasonable requested by management This job would suit someone from a manufacturing or production environment, previous job titles may include; Stud Welder / Welding Operative / Tube Bender / Tube Bending Operative / Production Line Operative / Manufacturing Operative / Machine Operator / Machinist / Factory Worker / Assembler / Assembly Operative / Fabrication Operative / Fabricator / Process Operator / Mechanical Fitter / Engineer / Coachbuilder / Mechanic / etc

Job Title: Milling Programmer / Setter / Operator - Heidenhain Location: Halifax, West Yorkshire Hourly Rate: £17.50 - £19.80 (Experience Dependent) Employment Type: Full-time Shift Pattern: Day Shift – 38 hours per week Working Hours: ⦁ Monday to Thursday: 7:00am – 3:30pm ⦁ Friday: 7:00am – 1:00pm Job Description My client is seeking an experienced Milling Programmer / Setter / Operator to join their precision machining team. This role is ideal for a skilled CNC machinist with hands-on experience programming, setting, and operating 3 and 4 Axis vertical milling machines using Heidenhain controls. You will be machining high-precision components from a variety of materials, including exotic and hard-to-machine alloys such as Inconel and Nitronic, to exacting quality and tolerance standards. Key Responsibilities ⦁ Program new CNC milling jobs directly at the machine using Heidenhain controls ⦁ Set up and operate vertical milling machines ⦁ Load, prove, edit, and optimise CNC programs ⦁ Accurately set up and load fixtures, vices, and tooling ⦁ Machine components from materials including Inconel, Nitronic, stainless steels, and other high-spec alloys ⦁ Interpret engineering drawings and technical specifications ⦁ Select appropriate tooling, feeds, speeds, and cutting strategies for exotic materials ⦁ Carry out first-off and in-process inspection to ensure quality compliance ⦁ Maintain tight tolerances and high surface finish standards ⦁ Identify and resolve machining, tooling, and process issues ⦁ Maintain a clean, safe, and organised working environment ⦁ Comply with all company health, safety, and quality procedures Skills & Experience Required ⦁ Proven experience as a CNC Milling Programmer / Setter / Operator ⦁ Strong working knowledge of Heidenhain CNC control systems ⦁ Experience operating vertical milling machines ⦁ Ability to program directly at the machine ⦁ Experience machining exotic or hard-to-machine materials (e.g., Inconel, Nitronic) ⦁ Confident in fixture setup, tooling selection, and work offset setting ⦁ Strong understanding of cutting tools and advanced machining practices ⦁ Ability to work accurately to tight tolerances ⦁ Self-motivated with excellent attention to detail ⦁ Able to work independently and collaboratively within a team Desirable (but not essential): ⦁ Experience with one-off, prototype, or small batch production ⦁ Background in precision or high-integrity industries (aerospace, oil & gas, medical, motorsport) ⦁ Knowledge of continuous improvement or lean manufacturing techniques Benefits ⦁ Competitive salary dependent on experience ⦁ Stable day shift working pattern (38 hours per week) ⦁ Early finish on Fridays ⦁ Modern, well-equipped machining environment ⦁ 32 days of annual leave, including: ⦁ Christmas period (approx. 5 days) ⦁ All UK statutory holidays (8 days) ⦁ 144 hours (19 days) flexible leave to use as you wish ⦁ Long-term career opportunity within a respected precision engineering company WHAT NEXT? Have you the experience? The company welcomes a site visit to ensure you are happy with the role, the environment, and the people you will work with! If you would like to speak to someone about booking a site visit, please contact Antony Brunn on (phone number removed) for more information or send an email to (url removed) Immediate starts are available! Workforce Technical place skilled and in-demand professionals on permanent and contract roles across Engineering, Technical, and Manufacturing sectors—from Shop Floor Personnel and Specialist Engineers to Supervisory and Management positions. Operating throughout Central England, our Specialist Consultants understand your skills and provide the best advice on your next career step. We’re always searching for top talent—if you know someone suitable, why not recommend them to one of our team who will be happy to help. MEAB

Our client is a well-established and successful manufacturer. They are looking for someone with good hands on manufacturing and production experience to join them as a Fabrication Operative / Tube Manipulator. This role will become permanent after successfully completing 3 months full work as a temporary agency worker. Shift pattern: 6.00am – 2.00pm / 2.00pm – 10.00pm (rotating every 2 weeks) Salary: £14.73 per hour (£12.95 basic + 13.75% shift allowance) + Overtime at time and a half, or double time (based on the basic) depending on the amount over overtime worked. Location: Holmfield HX2 PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Experience of metal tube bending and stud welding will be a definite advantage, but not essential Previous experience of working on / fabricating metal products will be favoured Previous experience in a hands-on role in a manufacturing / production / factory / engineering environment You are able to follow diagrams and engineers instructions to manufacture products. You can start ASAP, or with a very short notice period Duties and Responsibilities: Manual tube bending, cutting, and fabrication Stud welding Following engineering drawings and technical instructions Utilising hand and power tools whilst maintaining consistent quality Any other duties as reasonable requested by management This job would suit someone from a manufacturing or production environment, previous job titles may include; Stud Welder / Welding Operative / Tube Bender / Tube Bending Operative / Production Line Operative / Manufacturing Operative / Machine Operator / Machinist / Factory Worker / Assembler / Assembly Operative / Fabrication Operative / Fabricator / Process Operator / Mechanical Fitter / Engineer / Coachbuilder / Mechanic / etc

Our client is a well-established and successful manufacturer. They are looking for an experienced Assembly Operative / Assembler to work in their busy factory. IMMEDIATE START ONLY NOTE - This is a temporary contract till around Christmas (maybe less, as workloads are assessed). Shift pattern: 6.00am – 2.00pm / 2.00pm – 10.00pm (rotating every 2 weeks) Salary: £14.73 per hour + Overtime if available Location: Holmfield HX2 PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING REQUIREMENTS: Previous experience in a hands-on Assembly role in a manufacturing / production / factory / engineering environment. You must have experience of using a wide variety of hand tools and power tools. You are able to follow diagrams and engineers instructions to assemble products. You can start ASAP, or with a very short notice period. Duties and Responsibilities: • To position, align and fit manufactured parts to form complete units. • Utilising hand and power tools to assemble products whilst maintaining consistent quality. • Any other duties as reasonable requested by management. This job would suit someone from a manufacturing or production environment, previous job titles may include; Production Line Operative / Manufacturing Operative / Machine Operator / Machinist / Factory Worker / Assembler / Assembly Operative / Fabrication Operative / Fabricator / Process Operator / Mechanical Fitter / Engineer / Coachbuilder / Mechanic / etc

Taskmaster are looking for an experienced CNC operator to join our client based in Cleckheaton, BD19.

Attributes we are looking for machine operator:.

THE DUTIES OF A CNC OPERATOR: Set and operate CNC machines / fanuc controls Producing high precision work Reading engineering drawings Loading the machine with materials ESSENTIAL EXPERIENCES & SKILLS OF A CNC OPERATOR: * Minimum 2 years' experience working within a high

What is on offer to the Machine operator £32,993 per annum (inclusive of shift allowance) Contracted hours of work - 39 hours, anything over, paid at time and half Pension Scheme Training and personal development opportunities Permanent employment from the start Paid 30-minute break Key Acc

Taskmaster Huddersfield are looking for Machine Operatives to join our client in Huddersfield, HD5.

Job Title: CNC Programmer Location: Brighouse Salary: Dependent on Candidate Skillset CNC Programmer required for well-established manufacturing business based in Brighouse. The successful candidate will join a busy turning section operating Fanuc-controlled CNC lathes, working on a day shift. CNC Programmer Responsibilities Program, set and operate CNC lathes using Fanuc controls Edit and optimise programs at the machine Read and work from engineering drawings to tolerances CNC Programmer Requirements Proven experience as a CNC Turner / CNC Lathe Operator with Fanuc controls (essential) Ability to program and/or edit Fanuc programs (machine-side or offline) Confident setting tools, offsets and proving out jobs Strong understanding of machining practices, tooling and tolerances Able to read engineering drawings and inspect parts accurately CNC Programmer Details Day shift hours Mon-Thurs: 07:30 - 16:30 Fri: 07:30 - 13:30 Rate flexible depending on experience (DOE) Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

I am looking for an experienced Foiling Machine Operative for a busy and expanding company based in Bradford, supporting.

Working on an XYZ CNC Machine with Siemens controls. Has xdjnayx worked on an XYZ Machine with Siemens controls. Full training will be provided providing the successful candidate has previous experience on these machines.

Ensure you read the information regarding this opportunity thoroughly before making an application.Nights - Monday to Thursday 18.Weekends - Friday to Sunday 06.This role can be potentially offered tem.

Working on an XYZ CNC Machine with Siemens controls. Working on a semi-automated CNC xdjnayx machine. Taskmaster are looking for an experienced CNC operator to join our client based in Cleckheaton, BD19.

Day to day tasks for the successful candidate will be: -Setting up, operating and day-to-day running of a Folder Gluer Machine -Loading materials, adjusting settings, and ensuring proper alignment for folds and glue application -Continuously monitor the output to ensure products meet customer specif

Job Description Join us as a Production Operative at our Goxhill site in North Lincolnshire /n Wienerberger Ltd manufactures and provides wall, roof and landscaping products for the construction sector.We offer innovative and sustainable solutions across the whole building envelope for new build,

Seeking a technically minded Machine Operator for a new production area in a growing manufacturing business.

Operate specialist machinery in a manufacturing environment to cut materials to precise specifications.

Operate and maintain production machinery in a fast-paced manufacturing and print environment, ensuring quality and safety standards are met.

Slitter Operator (Full Training Provided) - Permanent.

The Role: We need 2 x experienced Machine Operators / Production Operatives to:.

We are seeking a Machine Operator to join our reinforcement manufacturing team. Working within our reinforcement manufacturing operation, you will be responsible for operating and setting cut and bend machinery to produce reinforcement steel accurately and efficiently, ensuring all products meet cus

We are looking for an experienced Machine Operator to join a well-established manufacturing company in Corby, specialising in irrigation equipment.

We're partnering with a well-established manufacturing business within the flexible packaging sector that is looking to add a Machine Operator to its Finishing team on a permanent basis.

Experienced CNC Woodworking Operator needed to machine panel materials to precise specifications. Responsibilities include operating machinery, reading drawings, setting up, and quality checks.

Seeking a reliable and hardworking CNC Machine Operator for a manufacturing team in Trentham.

Responsibilities include operating Biesse CNC machinery and programming using AutoCAD to create bespoke furniture components.

Operate hinge joint machines safely and efficiently, monitor output, perform basic maintenance, and ensure quality standards are met in a manufacturing environment.

We would expect the successful Machine Operator to be able to demonstrate a good working knowledge of manufacturing practices, work well to instructions and targets, enjoy working as part of a small busy manufacturing team. This would be an ideal role for you if you have worked within manufacturing,

Machine Operative, Manufacturing Operative, Manufacturing Engineer, Production Operative, Production Technician, Mechanical Technician, Junior Production Operative, Plant Operative, Machine Technician may also be considered for this role. Envar Composting are looking for a Plant Operator to operate

Job DescriptionMachine Operator.

As a Machine Operator, you'll be responsible for operating and se. This is a hands-on production role operating specialist machinery to accurately cut materials to the required specifications within a busy workshop environment.

The role will involve operating industrial sewing machines to manufacture and assemble rubber and fabric-based products, alongside general production duties within the factory.

We are currently recruiting for a Machine Operator to join a busy engineering and manufacturing company based in Atherstone-on-Stour.

Machine Operator needed for 12-hour shifts.

Full training will be provided on machine operation, quality checks, and health and safety procedures.

Driver/Machine Operator needed for a soil de-compaction company working across the UK. Responsibilities include basic machine repairs and maintenance.

Machine Operator/Shell Saw Operator role for experienced candidate in Rotherham.