Trabajos mechanical engineering technician en SouthamptonCrear alertas

Description Trant Te-Tech design, custom build and install a wide range of high quality control panels, motor control centres (MCC's) and automation systems, offering conventional, intelligent and withdrawable systems with outstanding reliability and functionality. Read all the information about this opportunity carefully, then use the application button below to send your CV and application. The Role As a Site Installation Technician you will be working on electrical systems associated with water treatment works, pumping stations, and process facilities, ensuring compliance with UK electrical regulations, health & safety standards, and project specifications. The role will be split between head office in Southampton and projects based across the UK. You must be comfortable with travel and staying away when required. What You'll Be Doing 1) Electrical Installation & Technical Works Wiring, Testing, Installation and Commissioning of Control Panels, Motor Control Centres and Associated Equipment. Carry out electrical terminations, modifications, and repairs in accordance with drawings and specifications. Support electrical testing, fault-finding, and commissioning activities. Onsite Fault Finding and Modification of Electrical Control Systems. Equipment Selection and Purchasing. Pre-Contract Site Surveys. Creation of Risk Assessments, Method Statements, Site Progress Reports and Other Site Paperwork. Build and wire backplates and control panels within Workshop when not on site. 2) Health, Safety & Environment (HSE) Comply fully with Electricity at Work Regulations 1989 and site HSE procedures. Follow safe isolation, lock-off, and permit-to-work systems. Wear appropriate PPE and use tools and equipment safely. Participate in site inductions, toolbox talks, and risk assessments. Report hazards, near-misses, and incidents promptly. 3) Quality Assurance & Compliance Ensure all electrical work complies with BS 7671 (18th Edition Wiring Regulations) and project requirements. Inspect own work and rectify defects where required. Assist with QA/QC checks, inspections, and testing procedures. 4) Documentation & Reporting Complete electrical installation records, test sheets, and inspection certificates accurately. Assist in updating as-built drawings and handover documentation. Provide progress updates to Senior Electricians or Supervisors. 5) Teamwork & Coordination Work effectively as part of a multi-disciplinary site team including mechanical and civil trades. Support Senior Electricians and Electrical Supervisors as required. Communicate clearly with colleagues regarding work progress and technical issues. 6) Core Values: Uphold and promote the Company's Core Values – Care, Trust, Respect and Sustainability. What We're Looking For Essential Current JIB / ECS card NVQ Level 3 in Electrical Installation or Electrical Engineering 18th Edition Wiring Regulations (BS 7671) Electrical installation on industrial / heavier industry projects (minimum 2 years) Full UK driving licence Why Join Trant? At Trant Engineering, we deliver complex, high-value engineering and construction projects across the UK. From process and water treatment to energy infrastructure upgrades, we play a key role in delivering and protecting critical national infrastructure – shaping the systems that communities and industries rely on every day. Our teams design and deliver full EPC solutions, combining technical excellence with practical, hands-on delivery. We offer end-to-end capabilities – from concept and design through to manufacturing, construction and commissioning utilising a continually evolving in-house expertise. This means you'll work on projects that are varied, challenging and genuinely impactful. Our multi-disciplinary teams bring together specialists in civil, mechanical, electrical, process, instrumentation, and control & automation engineering, alongside our in-house manufacturing of control panels, MCCs, PLCs and SCADA systems. With over 1,000 people and a strong, growing pipeline of work, it's an exciting time to join Trant. We are committed to helping our people succeed through our Career Development Association, providing structured support, mentoring and clear pathways to help you reach your full potential. Whether you're starting out or looking to take your next career step, Trant offers the chance to develop, progress and make a real difference. Our company benefits package includes: Competitive rates. 28 days holiday (including bank holidays). Options to buy additional holiday via salary sacrifice. Company pension scheme. Employee assistance program. Discretionary annual bonus. xrnqpay Join us and be part of something bigger.

Manufacturing Technician (CNC). Product Development Manager, whilst ensuring quality across manufacturing. This role would suit a mechanically minded machinist with a qualification in Mechanical Engineering, looking to develop a broad skillset within a growing and technically diverse manufacturing b

Workshop/Vehicle Technician Liss £18 - £21ph Permanent Workshop Recruitment is working with a well-established specialist automotive business looking for a skilled Workshop Technician to join its experienced workshop team. This is a varied hands-on role working on historic vehicles, from servicing and repairs through to restoration, rebuilds and event or race preparation. You'll use practical mechanical expertise to diagnose faults rather than simply replace parts, making this an ideal opportunity for a multi-skilled technician who enjoys solving complex mechanical problems. Key Responsibilities Carry out servicing, repairs and maintenance on vintage vehicles. Diagnose mechanical faults using practical experience and technical knowledge. Report, investigate and rectify vehicle issues effectively. Undertake restoration, rebuild and event or race preparation work. Maintain high standards of quality, accuracy and attention to detail. Complete timesheets, inspection records and other production documentation. Keep workshop areas clean, organised and compliant with Health & Safety requirements. Monitor job times and proactively flag potential delays or overruns. Skills & Knowledge Required Apprenticeship served or 2–3 years' experience in a similar role. Strong mechanical engineering and diagnostic skills. Experience working with classic, vintage, rally or race vehicles is desirable. Ability to diagnose faults without reliance on electronic diagnostic systems. High level of accuracy and attention to detail. Strong organisation and prioritisation skills. Proactive approach with the ability to take ownership of issues. Commitment to quality, deadlines and safe working practices. Benefits and hours Standard Holiday with option to Buy 5 Extra Days Pension * Monday to Friday, 7:00am–4:00pm, with 45 minutes of unpaid breaks per day. JBRP1_UKTJ

Energy Jobline CVL is seeking an experienced Mechanical Rolling Stock Technician for a 12-month fixed-term contract in Eastleigh (SO50). The role focuses on mechanical modifications, fault finding, and maintenance on a major rolling stock upgrade programme within a well-established rail engineering facility. Regular overtime and attractive rates are on offer. Candidates should have a mechanical apprenticeship or NVQ Level 3 in engineering, strong fault-finding skills, ability to read drawings, #J-18808-Ljbffr

2026-09-17T00:00:00 Chandler's Ford Hampshire GB SO53 2 Any 2026-12-16T23:02:26.393 Workshop Technician - 3 month contract - £16.00 - £18.00 per hour Step into a hands-on role where your practical skills and eye for detail are genuinely valued. This is a 3-month contract position with strong potential to extend, offering the chance to join a well-established workshop team in Southampton and contribute directly to high-quality production work. You will be working in a busy workshop environment, assembling, fitting and finishing components to precise specifications using a range of hand and power tools. Drawing on your carpentry, kitchen fitting or similar background, you'll interpret engineering drawings and deliver accurate, consistent work to tight tolerances. Your contribution will support on-time delivery of customer orders and help maintain high standards of quality and safety across the workshop. • Assemble, fit and finish components using appropriate hand and power tools to defined standards., • Interpret and work from engineering drawings, ensuring correct dimensions, orientation and fit., • Carry out precision measurement and inspection of parts using gauges, calipers and other measuring equipment., • Identify and report any non-conformances or quality issues, supporting corrective actions where required., • Maintain a clean, organised and safe work area in line with health and safety procedures., • Collaborate with colleagues and supervisors to coordinate workflow and meet production targets., • Handle materials, fixtures and jigs carefully to avoid damage and ensure consistent quality., • Support continuous improvement activities by suggesting practical improvements to methods, tooling or processes., • Confident use of a range of hand and power tools in a workshop or site environment, ideally from a wood background, • Ability to read and interpret engineering drawings and follow them accurately., • Competence in precision measurement and inspection using standard workshop measuring tools., • Strong attention to detail with a focus on producing accurate, high-quality work., • Good teamwork and communication skills, with the ability to work effectively within a small workshop team., • Demonstrated adherence to health and safety procedures and safe working practices., • Flexibility to adapt to changing priorities and tasks within the workshop., • Experience working with wood-based components or joinery-style assemblies., • Background in bench fitting, shopfitting, exhibition builds or similar workshop environments., • Familiarity with basic mechanical assembly or fitting of hardware and fixtures., • Experience working to production schedules or within a lean/continuous improvement environment., • Recognised apprenticeship or vocational qualification (e.g. NVQ/City & Guilds) in carpentry, joinery, wood machining, shopfitting or a related practical trade discipline (preferred)., • Relevant workshop or trade-based training in safe use of hand and power tools (required)., • Health and safety training such as manual handling, basic workshop safety or equivalent (preferred). If you're a practical, hands-on professional looking for a 3-month contract with the option to extend and a chance to put your trade skills to work in a workshop setting, we'd like to hear from you. #J-18808-Ljbffr

Are you a Mechanical or Electrical Engineer looking for a hands-on workshop role where you can develop your skills across pumps, electric motors and industrial equipment? This is an excellent opportunity to join a growing, family-run engineering business specialising in commercial and industrial pump services. The company works with customers across the UK, supplying maintenance and repair services into the water infrastructure and facilities management sectors. In this role, you'll work from the workshop carrying out the dismantling, diagnosis, repair and reassembly of pumps, electric motors and associated equipment. You'll work alongside an experienced team with plenty of training available, giving you the opportunity to broaden your mechanical and electrical skillset. The ideal candidate will have a strong mechanical background, ideally with experience in facilities maintenance, pumps, motors or similar equipment. Experience with motor rewinding would be advantageous but full training can be provided. • Dismantling, diagnosing and repairing pumps and electric motors, • Rewinding electric motors where experienced, with training available, • Reassembling pumps, motors and air handling equipment, • Carrying out mechanical and electrical fault finding, • Inspecting and testing equipment before return to customers, • Monday to Friday, 7:30am - 4:30pm, • Mechanical or Electrical engineering background, • Experience with pumps, electric motors, or HVAC equipment advantageous, • Full UK driving licence Reference Number: BBBH27038 Keywords: Workshop Engineer, Mechanical Engineer, Workshop Technician, Electromechanical Engineer, Electric Motors, Motor Rewinding, Pumps, Pump Repair, Facilities Maintenance, Water Infrastructure, Facilities Management, HVAC, Farnborough, Hampshire, Ash Vale, Surrey We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. JBRP1_UKTJ #J-18808-Ljbffr

Position: Mechanical Fitter / Bolting Technician. Integrate Engineering Resources are currently recruiting for Mechanical Fitter / Bolting Technicians for a shutdown on a refinery near Southampton. Integrate Engineering Resources are currently recruiting for Mechanical Fitter / Bolting Technicians f

Manufacturing Technician (CNC) £35,000 – £42,000 + Extensive Training + Progression + Bonus Scheme + Company Benefits Southampton Are you a mechanically qualified engineer from a CNC machining background, looking to take your career in a new direction by getting involved in wider quality activities, at a company offering excellent training and long-term development? On offer is the opportunity to join a well-established manufacturer, who specialise in rubber sealing and moulding solutions. Working across a wide range of industries, the company has built a strong reputation for delivering complex, customer‑specific products. At the start of 2027, the company is relocating to a brand new, purpose‑built facility in Totton. You will cover machining activities during holiday periods. When this isn’t applicable, your role will focus around supporting the Product Development Manager, whilst ensuring quality across manufacturing. This will involve product development initiatives, process improvements, tool testing and high-level inspection. Furthermore, you will help provide maintenance and mechanical assistance where required. This role would suit a mechanically minded machinist with a qualification in Mechanical Engineering, looking to develop a broad skillset within a growing and technically diverse manufacturing business. • Covering machine shop activities during holiday periods, • Support new product Introduction and product development projects, • Performing inspections on precision components, • Assisting production through troubleshooting, maintenance, and process improvements, • Monday to Thursday, 8 – 5, Friday, 8 – 3, • Qualification in Mechanical Engineering or similar, • Practical Experience operating CNC machinery Reference Number: BBBH25747k Keywords: Manufacturer, OEM, Rubber Moulding, Rubber Sealing, Mechanical, Quality, Production, Engineering, CMM, ISIR, FAIR, Training, Bespoke, Southampton, Totton, CNC, Maintenance, We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. #J-18808-Ljbffr

A global leader in high quality, safety-critical electro-mechanical products that are sold globally are looking for a Maintenance Engineer to join their 24 hour production line. Exciting electro-mechanical Maintenance Engineer role on a small night shift team, supervising one Technician in a fast paced, high tech manufacturing facility. You will maintain a cutting edge 24 hour production line including pick & place machines, SMT screen printers, ovens, conveyors, automated optical inspection machines, assembly lines, robotics, conveyors & laser marking machines amongst others. The night shift can be a challenge as there are less people available to help so you will be comfortable with root cause analysis & fault diagnosis / identification. Alongside reactive maintenance & planned maintenance activities you will run small CI projects to improve downtime and machinery performance. • Time served or HNC (or equivalent) qualification in an electrical, mechanical or electro-mechanical engineering discipline. They do a lot of small mechanical adjustments, very little 3 phase electrical maintenance., • 2/3 + years experience in a similar role some experience in maintenance environment will be essential, • Some knowledge of electrical & electronic systems & sensors e.g. PLCs, vision systems, fibre optic sensors, mechanics, pneumatics, robotics and test equipment etc., • Good problem solving & decision making is keyyou will be able to fault find and diagnose - main thing is a good track record fault finding and RCA., • Experience with RCA making improvements to machines & processes - e.g. RCA methodologies, SMED, 5Whys, fishbone, Ishikawa - predictive and preventative strategy., • You will have a proactive mindset always looking for cost savings and improvements, • Experience of robotics, conveyors or hydraulics, • 18th Edition qualified, • Experience mentoring / leading apprentices etc - if you don't have that experience it can be developed with in house management courses, 121s & distance learning opportunities., • Lean - proactive approach to eliminate waste, SMED etc environment, the people, the process and the equipment., • 37 hours per week, • Night shift start from - finish at 6am, then Monday, Tuesday, Wednesday, Thursday 10pm start, 6am finish., • Overtime at time and a half, • Significantly enhanced pension scheme, • 25 days holiday + ability to purchase extra days, • Company Bonus Scheme, • Share allocation scheme, • Health plan, access to 24 hour doctors etc, • Life Insurance (3 x annual salary and up to 6 x annual salary depending on Ts and Cs) JBRP1_UKTJ #J-18808-Ljbffr

Muc-Off was established in 1994, and since then we have experienced strong global growth in the bicycle and motorcycle markets. Today, we are global leaders in our field and have a disruptive and distinctive approach to life. Partnered with some of the world's best teams and athletes across a range of cycling disciplines, Muc-Off has become the reference point in the care and maintenance category with exciting and ambitious plans for the future. This is an awesome time to be part of this truly innovative British brand as we embark upon new territories and sectors, whilst growing our brand presence and engagement for our core portfolio. This is a truly results-driven culture where everyone can make a difference and contribute to the future chapter of the 'OG' in bike care. As a Senior Engineering Machine Setter, you will play a key role in ensuring the safe, efficient and reliable operation of Muc-Off's production lines. You will take responsibility for setting, changing over, operating and optimising production machinery while providing technical support to Crew Members and Machine Setters. Working closely with the Production, Quality and Warehouse teams, you will help minimise downtime, improve line performance and ensure products are manufactured to the required quality and safety standards. The role requires a hands‑on engineering mindset, strong fault‑finding capabilities and the ability to lead by example in a fast‑paced production environment. Key responsibilities Machine Set‑Up and Changeovers • Set up, configure and prepare production and packaging machinery for scheduled manufacturing runs, • Complete product and format changeovers safely, accurately and within agreed timeframes, • Install and adjust machine parts, tooling, guides, sensors and operating parameters, • Verify machine settings and complete start‑up checks before production begins, • Ensure lines are correctly calibrated to meet product, packaging and quality specifications Machine Operation and Performance • Monitor machinery and production line performance throughout each manufacturing run, • Make real‑time mechanical and operational adjustments to maintain output, quality and efficiency, • Identify production losses, recurring stoppages and areas of poor machine performance, • Support the achievement of production targets, including output, waste, quality and downtime objectives, • Ensure machines are operated within approved engineering and manufacturer parameters Engineering Support and Fault‑Finding • Diagnose mechanical, pneumatic, electrical and control‑related machine faults within the scope of the role, • Respond quickly to breakdowns and production line issues to minimise disruption, • Conduct minor repairs, component replacements and machine adjustments, • Escalate complex engineering faults to the appropriate Line Manager, • Support root‑cause investigations into recurring breakdowns, defects and equipment failures, • Assist with machine trials, commissioning activities and the introduction of new equipment Maintenance • Conduct planned autonomous and preventative maintenance activities in accordance with maintenance schedules, • Complete machine clean‑downs, inspections and lubrication during product changeovers, • Identify worn, damaged or failing components before they result in equipment failure, • Ensure maintenance activities and machine interventions are accurately recorded Leadership and Training • Provide day‑to‑day technical guidance to Machine Setters, Crew Members and temporary team members, • Train and coach colleagues in machine operation, changeovers, basic fault‑finding and safe working practices, • Lead by example and promote high standards of safety, quality, housekeeping and operational discipline, • Support the development of standard operating procedures, setting sheets and training documentation, • Function as the first point of technical escalation during production shifts where appropriate, • Identify and implement improvements to machine reliability, changeover times, line efficiency and product quality, • Support continuous improvement activities using structured problem‑solving techniques, • Contribute to improvements in overall equipment effectiveness, waste reduction and production output, • Recommend modifications to equipment, tooling, processes and working methods, • Participate in production reviews, engineering meetings and improvement projects Quality and Compliance • Ensure products are manufactured in accordance with approved specifications and quality standards, • Complete in‑process checks and respond promptly to quality concerns or non‑conforming products, • Work closely with the Health & Safety Manager to investigate defects and implement corrective actions, • Ensure machine settings, production records and traceability documentation are complete and accurate, • Follow all applicable company procedures, manufacturing standards and regulatory requirements Health, Safety and Housekeeping • Adhere to all health and safety procedures, risk assessments and safe systems of work, • Ensure correct isolation and lock‑off procedures are followed before machine interventions, • Use the required personal protective equipment at all times, • Report hazards, near misses, unsafe conditions and equipment concerns immediately, • Maintain a clean, organised and safe production environment, • Ensure housekeeping standards are consistently maintained across production areas Must-haves • Extensive experience working as a Machine Setter, Engineering Setter, Production Technician or in a similar manufacturing role, • Proven experience setting up, changing over and operating automated or semi‑automated production machinery, • Strong mechanical aptitude and practical engineering skills, • Demonstrable experience diagnosing and resolving machine faults, • Experience conducting routine maintenance, minor repairs and equipment inspections, • Ability to read and follow technical instructions, setting sheets, standard operating procedures and engineering documentation, • Strong attention to detail and the ability to work accurately in a fast‑paced environment, • Good numeracy, computer literacy and general IT skills, • Strong verbal and written communication skills, • Ability to organise and prioritise workloads effectively, • Flexible and reliable approach to work, • Positive, proactive attitude with a strong focus on finding solutions, • Ability to work independently and as part of a cross‑functional team, • Experience working on filling, capping, labelling, coding, packaging or automated conveyor systems, • Experience within chemical, automotive, FMCG, cosmetics, pharmaceutical or consumer goods manufacturing, • Knowledge of pneumatic, electrical and programmable control systems, • Experience using continuous improvement tools such as 5S, root‑cause analysis, SMED or Overall Equipment Effectiveness, • Experience training or mentoring Machine Setters and Production Operators, • Relevant mechanical, electrical or manufacturing engineering qualification, • Experience working with computerised maintenance or production management systems, • 33 days holiday, inclusive of UK bank holidays, which increases with length of service, • Cycle to Work Scheme, • Long Service Rewards, • Pension contributions, • Medicash Programme, • Employee Assistance Programme, • Excellent staff discount on Muc-Off products and other brands in the industry, • Brilliant social events, • A dynamic office working environment where staff are encouraged to indulge their passions for cycling and fitness MUC-OFF LTD - SOUTHAMPTON Job Type: Full-Time #J-18808-Ljbffr

Muc-Off was established in 1994, and since then we have experienced strong global growth in the bicycle and motorcycle markets. Today, we are global leaders in our field and have a distinctive approach to life. Partnered with some of the world’s best teams and athletes across a range of cycling disciplines, Muc-Off has become the reference point in the care and maintenance category with exciting and ambitious plans for the future. This is an awesome time to be part of this truly innovative British brand as we embark upon new territories and sectors, whilst growing our brand presence and engagement for our core portfolio. This is a truly results-driven culture where everyone can make a difference and contribute to the future chapter of the ‘OG’ in bike care. About the role As a Senior Engineering Machine Setter, you will play a key role in ensuring the safe, efficient and reliable operation of Muc-Off’s production lines. You will take responsibility for setting, changing over, operating and optimising production machinery while providing technical support to Crew Members and Machine Setters. Working closely with the Production, Quality and Warehouse teams, you will help minimise downtime, improve line performance and ensure products are manufactured to the required quality and safety standards. The role requires a hands-on engineering mindset, strong fault-finding capabilities and the ability to lead, by example, in a fast-paced production environment. Key Responsibilities: Machine Set-Up and Changeovers • Set up, configure and prepare production and packaging machinery for scheduled manufacturing runs., • Complete product and format changeovers safely, accurately and within agreed timeframes., • Install and adjust machine parts, tooling, guides, sensors and operating parameters., • Verify machine settings and complete start-up checks before production begins., • Ensure lines are correctly calibrated to meet product, packaging and quality specifications. Machine Operation and Performance • Monitor machinery and production line performance throughout each manufacturing run., • Make real-time mechanical and operational adjustments to maintain output, quality and efficiency., • Identify production losses, recurring stoppages and areas of poor machine performance., • Support the achievement of production targets, including output, waste, quality and downtime objectives., • Ensure machines are operated within approved engineering and manufacturer parameters. Engineering Support and Fault-Finding • Diagnose mechanical, pneumatic, electrical and control-related machine faults within the scope of the role., • Respond quickly to breakdowns and production line issues to minimise disruption., • Conduct minor repairs, component replacements and machine adjustments., • Escalate complex engineering faults to the appropriate Line Manager., • Support root-cause investigations into recurring breakdowns, defects and equipment failures., • Assist with machine trials, commissioning activities and the introduction of new equipment. Maintenance • Conduct planned autonomous and preventative maintenance activities in accordance with maintenance schedules., • Complete machine clean-downs, inspections and lubrication during product changeovers., • Identify worn, damaged or failing components before they result in equipment failure., • Ensure maintenance activities and machine interventions are accurately recorded. Leadership and Training • Provide day-to-day technical guidance to Machine Setters, Crew Members and temporary team members., • Train and coach colleagues in machine operation, changeovers, basic fault-finding and safe working practices., • Lead by example and promote high standards of safety, quality, housekeeping and operational discipline., • Support the development of standard operating procedures, setting sheets and training documentation., • Function as the first point of technical escalation during production shifts where appropriate., • Identify and implement improvements to machine reliability, changeover times, line efficiency and product quality., • Support continuous improvement activities using structured problem-solving techniques., • Contribute to improvements in overall equipment effectiveness, waste reduction and production output., • Recommend modifications to equipment, tooling, processes and working methods., • Participate in production reviews, engineering meetings and improvement projects. Quality and Compliance • Ensure products are manufactured in accordance with approved specifications and quality standards., • Complete in-process checks and respond promptly to quality concerns or non-conforming products., • Work closely with the Health & Safety Manager, to investigate defects and implement corrective actions., • Ensure machine settings, production records and traceability documentation are complete and accurate., • Follow all applicable company procedures, manufacturing standards and regulatory requirements. Health, Safety and Housekeeping • Adhere to all health and safety procedures, risk assessments and safe systems of work., • Ensure correct isolation and lock-off procedures are followed before machine interventions., • Use the required personal protective equipment at all times., • Report hazards, near misses, unsafe conditions and equipment concerns immediately., • Maintain a clean, organised and safe production environment., • Ensure housekeeping standards are consistently maintained across production areas. Must-haves • Extensive experience working as a Machine Setter, Engineering Setter, Production Technician or in a similar manufacturing role., • Proven experience setting up, changing over and operating automated or semi-automated production machinery., • Strong mechanical aptitude and practical engineering skills., • Demonstrable experience diagnosing and resolving machine faults., • Experience conducting routine maintenance, minor repairs and equipment inspections., • Ability to read and follow technical instructions, setting sheets, standard operating procedures and engineering documentation., • Strong attention to detail and the ability to work accurately in a fast-paced environment., • Good numeracy, computer literacy and general IT skills., • Strong verbal and written communication skills., • Ability to organise and prioritise workloads effectively., • Flexible and reliable approach to work., • Positive, proactive attitude with a strong focus on finding solutions., • Ability to work independently and as part of a cross-functional team., • Experience working on filling, capping, labelling, coding, packaging or automated conveyor systems., • Experience within chemical, automotive, FMCG, cosmetics, pharmaceutical or consumer goods manufacturing., • Knowledge of pneumatic, electrical and programmable control systems., • Experience using continuous improvement tools such as 5S, root-cause analysis, SMED or Overall Equipment Effectiveness., • Experience training or mentoring Machine Setters and Production Operators., • Relevant mechanical, electrical or manufacturing engineering qualification., • Experience working with computerised maintenance or production management systems. What we can offer • 33 days holiday, inclusive of UK bank holidays which increases with length of service, • Cycle to Work Scheme, • Long Service Rewards, • Pension contributions, • Medicash Progamme, • Death in Service, • Employee Assistance Programme, • Excellent staff discount on Muc-Off products and other brands in the industry, • Brilliant social events, • A dynamic office working environment where staff are encouraged to indulge their passions for cycling and fitness #J-18808-Ljbffr

We are recruiting a Maintenance Engineer / Maintenance Technician for a large international factory in Hampshire. The role covers planned maintenance, breakdown response and upgrades in a fast-paced production setting. Candidates should have a maintenance or service engineering background, with an apprenticeship or NVQ/C&G Level 3, and multi-skilled electrical/mechanical capabilities. On-site role with day/night shift rotation. #J-18808-Ljbffr

Ernest Gordon Recruitment is seeking a Manufacturing Technician (CNC) in Southampton. You will join a well‑established manufacturer specialising in rubber sealing and moulding, with modern facilities planned in Totton. The role involves supporting product development, quality inspection, and maintenance while working on CNC machining tasks. The ideal candidate will have a Mechanical Engineering qualification and hands‑on CNC experience, with extensive training, progression opportunities, and a #J-18808-Ljbffr

Role: Maintenance Engineer / Maintenance Technician Salary: £45,000 to £46,000 per annum, plus benefits, further training and career opportunities Hours: 12 hour shifts, rotation of days & nights - 2 weeks of days followed by 2 weeks of nights Location: Commutable from Southampton, Havant, Portsmouth, Eastleigh, Winchester, Fareham and surrounding areas Company We are actively recruiting for a Maintenance Engineer to work within a large international company at one of their premium, new and modern factories in Hampshire. You will benefit from an established, friendly and loyal team of Maintenance Engineers who provide planned maintenance & respond to breakdowns within their fast-paced production environment. The opportunity offers you the chance to receive training to cover both disciplines, so those who are either fully mechanical or fully electrical are very much encouraged to apply. As long as you're willing to learn and take on the training required. If you are a qualified engineer with experience of maintenance or service work, looking for a great opportunity to sink your teeth into and build a bright future, this is the job for you! Do not delay and apply now! The Role Working under the direction of the senior engineer, this Multi-Skilled Maintenance Engineer will provide their efforts to complete allocated mechanical & electrical maintenance tasks and projects, ensuring quality and completion of the tasks are delivered within the agreed timescales. Responsibilities include undertaking planned maintenance, reacting to breakdowns, delivering equipment upgrades, new installations and infrastructure changes, together with building maintenance as & when required. This is a multi-skilled environment, however either bias is acceptable with help and support provided for the Maintenance Engineer to improve the lesser discipline. Requirements A background in Maintenance engineering or Service Engineering in any environment, such as industrial, facilities, FMCG, building services or similar type production/manufacturing environments. Have completed a recognised engineering apprenticeship or hold engineering qualifications ie. NVQ or C&G Level 3 in mechanical, electrical or multi-skilled. Enjoy good maintenance and troubleshooting skills across some of the following; motors, belts, bearings, chains, gears, boilers, pumps, inverters, sensors, relays, contactors, 3 phase motors, PLC's, pneumatics, hydraulics or similar. Are multi-skilled across electrical & mechanical – either bias is equally welcome – alternatively you have a passion to build on your current speciality (Mechanical or Electrical) and become multi-skilled! Have good fault-finding skills. Are friendly and adaptable, with the ability to work well as part of a small team Are proactive and enjoy getting your hands dirty If this role within a superb team of like minded engineers sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful. JBRP1_UKTJ

Maintenance Engineer (No nights) A great opportunity for a Maintenance Engineer has arisen to work for an internationally renowned industrial process business based in the Hampshire area. Salary – £41,000 + Overtime + Package Shifts – Day shift (No Nights involved) Location, commutable from – Basingstoke Skills required for the job of a Maintenance Engineer - ·Maintenance and repairs of production equipment ·Electrical engineering, single, 3 phase, motors, fault finding ·Mechanical engineering – fault finding and repairs ·Continuous improvement ·Following Health & Safety procedures on site Company benefits for the role of Maintenance engineer – ·£41,000 + Good Overtime rates + Package ·Pension / Holidays ·Good external training courses provided ·DAYS ONLY – NO NIGHT WORK Commutable from: Basingstoke Other job titles – multi-skilled maintenance engineer, Shift engineer, electrical maintenance engineer, maintenance technician, mechanical maintenance engineer JBRP1_UKTJ

We are seeking a proactive and hands-on Application Technician to join our Engineering team. This is an exciting opportunity for someone who has experience in manufacturing processes who enjoys working on new product development, process improvement, and technical support. Working closely with engineers, product management, and manufacturing partners, you'll play a key role in developing, testing, validating, and documenting fibre optic solutions while supporting customers throughout the product lifecycle. This role also offers the opportunity to travel across Europe approximately once per month, providing on-site technical support, customer training, product qualifications, and assistance to manufacturing partners. Key Responsibilities for this Application Technician job based In Basingstoke. As an Application Technician, you will: • Support engineers with the development, assembly, testing, and validation of new fibre optic products and processes., • Produce and maintain Engineering Termination Procedures (ETPs), technical documentation, and instructional videos., • Build proof-of-concept prototypes and assist with new product introductions., • Perform fibre optic connector and cable assembly, including fibre stripping, ribbonising, cleaving, crimping, fusion splicing, polishing, testing, and connector inspection., • Analyse test data and validate fibre system performance using established procedures., • Assist with Design of Experiments (DOE), process verification, troubleshooting, and continuous improvement initiatives., • Work with contract manufacturers by providing technical training, remote support via video and telephone, and assisting with product qualifications and trials., • Travel to customer and manufacturing partner sites across Europe approximately once a month to deliver technical support, conduct training, support product qualifications, and help resolve technical issues., • Support customer investigations, technical queries, and issue resolution., • Maintain a well-organised engineering training laboratory, ensuring equipment, materials, and documentation are accurately labelled and stored., • Interpret engineering drawings, assembly documentation, product specifications, and manufacturing instructions. About You We're looking for someone who is technically minded, organised, and enjoys solving problems. You'll be comfortable working independently while collaborating effectively with engineering and cross-functional teams. Essential Skills & Experience • Experience working with fibre optic connectors (desirable), cables, assembly, and testing procedures., • Knowledge of fibre handling techniques including stripping, cleaving, splicing, polishing, crimping, and inspection., • Understanding of manufacturing documentation, engineering drawings, and product specifications., • Experience supporting manufacturing processes, process improvement, or troubleshooting activities., • Strong organisational skills with excellent attention to detail., • Good computer skills, including Microsoft Office., • Excellent written and verbal communication skills., • Ability to manage multiple priorities in a fast-paced engineering environment., • Willingness and ability to travel within Europe approximately once per month., • A proactive, self-motivated approach with strong problem-solving abilities. Desirable • Bachelor's degree in Engineering, Science, or another technical discipline, or equivalent practical experience., • Probable experience within optical fibre cable assembly or a related manufacturing environment., • Experience with statistical software and test equipment software., • Knowledge of Design of Experiments (DOE) and process validation., • 3D CAD experience (SolidWorks preferred)., • Spanish language skills., • Experience supporting customers or contract manufacturers. What You'll Bring - You'll thrive in this role if you: • Enjoy finding practical solutions to technical challenges., • Take ownership of your work and continuously seek improvements., • Work collaboratively across departments., • Adapt quickly to changing priorities., • Have excellent mechanical dexterity and attention to detail., • Enjoy working with customers and are happy to travel internationally., • Are passionate about delivering high-quality products and customer support. If you're looking to develop your engineering career within an innovative Basingstoke based technical environment where you'll work on cutting-edge fibre optic technology and have the opportunity to travel across Europe supporting customers and manufacturing partners, we'd love to hear from you. Apply today to become part of a collaborative engineering team driving product innovation and continuous improvement. Please send your cv over to or call 01582 878839 for more information. JBRP1_UKTJ

Mechanical Assembly Technician Are you a hands-on Technician / Engineer who takes pride in quality workmanship and getting things right first time? Were looking for a Mechanical Assembly Technician to assemble, test and inspect high-quality mechanical and electro-mechanical products. Youll work from engineering drawings and specifications as part of a skilled, collaborative production team. Responsib... JBRN1_UKTJ

Production Support Technician (Maintenance / CNC) £35,000 - £42,000 + Extensive Training + Progression + Bonus Scheme + Company Benefits *Full CMM Training* Southampton Are you a mechanically qualified engineer from a CNC machining background, looking to take your career in a new direction by getting involved in wider quality activities, at a company offering excellent training and long-term development? On offer is the opportunity to join a well-established manufacturer, who specialise in rubber sealing and moulding solutions. Working across a wide range of industries, the company has built a strong reputation for delivering complex, customer-specific products. At the start of 2027, the company is relocating to a brand new, purpose-built facility in Totton. You will cover machining activities during holiday periods. When this isn't applicable, your role will focus around supporting the Product Development Manager, whilst ensuring quality across manufacturing. This will involve product development initiatives, process improvements, tool testing and high-level inspection. Furthermore, you will help provide maintenance and mechanical assistance where required. This role would suit a mechanically minded machinist with a qualification in Mechanical Engineering, looking to develop a broad skillset within a growing and technically diverse manufacturing business. The Role • Covering machine shop activities during holiday periods, • Support new product Introduction and product development projects, • Performing inspections on precision components, • Assisting production through troubleshooting, maintenance, and process improvements, • Monday to Thursday, 8 - 5, Friday, 8 - 3 The Person • Qualification in Mechanical Engineering or similar, • Practical Experience operating CNC machinery If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25747l Keywords: Manufacturer, OEM, Rubber Moulding, Rubber Sealing, Mechanical, Quality, Production, Engineering, CMM, ISIR, FAIR, Training, Bespoke, Southampton, Totton, CNC, Maintenance, We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Role: Maintenance Engineer / Maintenance Technician Salary: £45,000 to £46,000 per annum, plus benefits, further training and career opportunities Hours: 12 hour shifts, rotation of days & nights - 2 weeks of days followed by 2 weeks of nights Location: Commutable from Southampton, Havant, Portsmouth, Eastleigh, Winchester, Fareham and surrounding areas Company We are actively recruiting for a Maintenance Engineer to work within a large international company at one of their premium, new and modern factories in Hampshire. You will benefit from an established, friendly and loyal team of Maintenance Engineers who provide planned maintenance & respond to breakdowns within their fast-paced production environment. The opportunity offers you the chance to receive training to cover both disciplines, so those who are either fully mechanical or fully electrical are very much encouraged to apply. As long as you're willing to learn and take on the training required. If you are a qualified engineer with experience of maintenance or service work, looking for a great opportunity to sink your teeth into and build a bright future, this is the job for you! Do not delay and apply now! The Role Working under the direction of the senior engineer, this Multi-Skilled Maintenance Engineer will provide their efforts to complete allocated mechanical & electrical maintenance tasks and projects, ensuring quality and completion of the tasks are delivered within the agreed timescales. Responsibilities include undertaking planned maintenance, reacting to breakdowns, delivering equipment upgrades, new installations and infrastructure changes, together with building maintenance as & when required. This is a multi-skilled environment, however either bias is acceptable with help and support provided for the Maintenance Engineer to improve the lesser discipline. Requirements A background in Maintenance engineering or Service Engineering in any environment, such as industrial, facilities, FMCG, building services or similar type production/manufacturing environments. Have completed a recognised engineering apprenticeship or hold engineering qualifications ie. NVQ or C&G Level 3 in mechanical, electrical or multi-skilled. Enjoy good maintenance and troubleshooting skills across some of the following; motors, belts, bearings, chains, gears, boilers, pumps, inverters, sensors, relays, contactors, 3 phase motors, PLC's, pneumatics, hydraulics or similar. Are multi-skilled across electrical & mechanical – either bias is equally welcome – alternatively you have a passion to build on your current speciality (Mechanical or Electrical) and become multi-skilled! Have good fault-finding skills. Are friendly and adaptable, with the ability to work well as part of a small team Are proactive and enjoy getting your hands dirty If this role within a superb team of like minded engineers sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful. TPBN1_UKTJ

Field Service Engineer / Technician – UK We are currently recruiting for a Field Service Engineer / Technician to join an established and highly regarded marine technology business specialising in advanced systems for the commercial, defence and luxury yacht sectors. This is a hands‑on role suited to an experienced engineer who enjoys solving technical problems, working directly with customers and travelling to vessels both in the UK and internationally. Working as part of a specialist service team, you will be responsible for travelling to vessels to install, commission, service and repair complex marine systems. When not travelling, you will provide technical support from the company's UK office. The role will involve a combination of mechanical, electrical, hydraulic and control system troubleshooting, requiring a practical and analytical approach to fault finding. • Provide professional on-site installation, commissioning, servicing and repair support, • Diagnose and troubleshoot mechanical, electrical, hydraulic and control system issues, • Interpret technical drawings, schematics and service documentation, • Provide technical support to customers and colleagues when office-based, • Complete service reports, timesheets and associated documentation accurately, • Maintain a high standard of customer service and professionalism, • Work independently while managing deadlines and priorities, • Travel to customer vessels across the UK and internationally as required We are looking for someone with a strong practical engineering background and experience working with machinery or complex technical systems. Ideally, you will have: • At least 2 years' experience assembling, servicing, commissioning or troubleshooting machinery or technical systems, • Good working knowledge of mechanical, electrical and hydraulic systems, • The ability to read and understand technical drawings, schematics and technical manuals, • Strong diagnostic and problem-solving skills, • A hands‑on, practical approach to engineering, • The ability to work independently and manage your own workload, • Good IT skills and the ability to complete service and parts documentation, • Excellent communication and customer-facing skills, • Full willingness and ability to undertake UK and international travel, • Previous marine engineering experience is highly desirable An engineering qualification in electrical engineering, electronics or a related discipline would be advantageous, but relevant hands‑on experience will also be considered. The Person You will be professional, reliable and organised, with the confidence to represent the business directly with customers and vessel crews. You should be comfortable working under pressure, able to think logically when diagnosing faults and committed to delivering a high-quality service. This is an excellent opportunity for an engineer looking to develop their career within a specialist and technically advanced marine environment, with exposure to a wide range of vessels, systems and international customers. Southampton / UK-based UK and weekly international travel required #J-18808-Ljbffr

£28'000 to £31,000 Basic + Bonus + Overtime (OTE £37,000) + Full Training + Gain Qualifications + Company Van + Personal Use + Fuel Card Work for a company that will invest in your future through OEM training, Industry qualifications, and constant support and personal development as a trainee field service engineer. Work within a highly skilled team where you will constantly be learning as you're earning through overtime. This company manufactures, fixes and installs a variety of equipment used in the petro chem industry. As industry leaders they can provide 1st class training supporting your development in the best way. Start as a Trainee Field Service Engineer and progress your career at your own pace through to senior positions whilst being able to significantly boost your earnings through overtime. • Trainee Field Service Engineer - Covering a local patch at customer sites, • OEM (manufacturer) training ensuring full competency on all products (internal and external), • Installing, maintaining and servicing company equipment, • Hands on mechanical engineering work - with some electrical, • Any hands on mechanical / electro mechanical / electrical engineering skills - fitting / assembly - ANY CONSIDERED, • Desire and attitude towards learning and development, • Full driving licence, • Happy to travel and willing to travel a local patch around the South Coast as a field service engineer Keywords:Trainee Field Service Engineer, Field Service Engineer, Mechanical Engineer, Electro-Mechanical Engineer, Field Service Technician, Service Technician, Engineer, Mechanic, Ex-Forces, Service Engineer, Technician, Southampton, Portsmouth #J-18808-Ljbffr

Quality and Production Technician (Rubber Moulding / OEM). Are you a mechanically minded engineer with a qualification in Mechanical, Quality, or Production Engineering, looking for a varied, hands-on role offering excellent training and long-term development within a highly bespoke manufacturing en

Position: Mechanical Engineering Technician. My client, a specialist manufacturing business are on the hunt for an experienced Mechanical Engineering Technician to join their team!. Role and Responsibilities – Mechanical Engineering Technician.

Seeking a Senior Technician to supervise a team, manage Health and Safety, and maintain equipment for Mechanical Engineering students and staff at Uxbridge College.

Mechanical Engineering Technician needed for a specialist engineering business in Oxfordshire to assemble complex scientific and cryogenic systems.

Maintenance Technician - Qatar. The Maintenance Technician is responsible for the day-to-day maintenance and upkeep of club facilities, ensuring all equipment, systems and environments are safe, functional and maintained to a high standard. Basic electrical, plumbing and mechanical maintenance.

Join the UK's Favourite Parcel Delivery Company!.Christmas Incentive 2026 - Earn an EXTRA 50p for every stop*.To qualify and be paid before Christmas Eve, simply:.Deliver parcels on our busiest days.At DPD, we provide the tech, start up support, and steady volume you need to build a high-earning r

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Whether you already have a suitable van or need access to one, now is the perfect time to get on the road.Enjoy consi

Enthusiastic and competent problem solver with a practical approach to engineering problems. Recognised Mechanical apprenticeship or similar.

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Whether you already have a suitable van or need access to one, now is the perfect time to get on the road.Enjoy consi

Engineer, Engineering, Mechanic, Fitter, Plant Fitter, Heavy Plant, Mechanical, Electrical, Hydraulics, Site, Progression, Training, Burscough, Ormskirk, Southport, Liverpool, Junior. Junior Plant Engineer (Mechanical). Are you an apprenticeship trained Mechanical Engineer seeking a step up in your

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Whether you already have a suitable van or need access to one, now is the perfect time to get on the road.Enjoy consi

Strong mechanical design and project engineering experience. This is an excellent opportunity for a mechanically biased engineer who enjoys a mix of new product development, design improvement, project delivery and customer-focused engineering solutions. Degree or HNC/HND qualification in Mechanical

As the Lead Mechanical Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. Perform physical testing and design proving activities on engineering prototypes. Experience in the design and development of mechanical products.

In this Monday-Friday, office-based role, you will be responsible for the design and development of bespoke mechanical equipment, producing 3D CAD models, manufacturing drawings and engineering calculations. This role would suit a Mechanical Design Engineer with Autodesk Inventor experience looking

Background in service engineering, armed forces, electro-mechanical, agriculture, automotive or similar. Do you have a background in field-based engineering within the armed forces, maintenance, installation, automotive/ vehicle, pumps or machinery equipment looking for extensive training?. Keywords

We are recruiting on behalf of an established engineering and manufacturing business seeking an experienced Mechanical Engineer to join its Engineering and Product Development team. HND or higher in Mechanical Engineering or a related discipline. A varied, hands-on opportunity for a practical and te

Mechanical, Mechanic, Mechanical, Assembly, Fitter, Testing, Gearboxes, Motors, Industrial, Engineer, Engineering, Gearbox, Assembler, Reading, Tadley, Newbury, Thatcham, Basingstoke. Junior Mechanical Fitter (Motors / Gearboxes). This will include fault finding and stripping down of various mechani

As a Mechanical Fitter you will be tasked with the assembling a variety of small and large mechanical assemblies to customer specification. Assemble large Tether Management Systems, ROV chassis and associated mechanical assemblies in accordance with engineering drawings, specifications and work inst

Experience or a relevant background in mechanical building services engineering. Mechanical Design Engineer | Mechanical Building Services | Building Services Design | HVAC | Heating Systems | Ventilation | Cooling Systems | AutoCAD | Design Calculations | Technical Specifications | Energy Efficienc

NVQ Level 3 in Mechanical Engineering, Building Services Engineering, Heating & Ventilation, Plumbing, or an equivalent recognised qualification. A completed Mechanical Engineering apprenticeship. Mechanical Engineer (Estates Technician).

We are recruiting on behalf of an established, engineering provider specialising in bespoke complex electro-mechanical systems, who are seeking a Mechanical Design Engineer to join their team. Mechanical Design Engineer (Contract). Process engineering, skid-mounted systems, modular plant, or machine

This role would suit a mechanically minded machinist with a qualification in Mechanical Engineering, looking to develop a broad skillset within a growing and technically diverse manufacturing business. Qualification in Mechanical Engineering or similar. Keywords: Manufacturer, OEM, Rubber Moulding,

A well-established manufacturing business operating within a highly regulated process environment is looking to strengthen its on-site engineering team. As a Maintenance Technician, you will be responsible for carrying out planned and reactive maintenance across a varied manufacturing facility. A me

Mechanical, Mechanic, Mechanical, Assembly, Fitter, Testing, Gearboxes, Motors, Industrial, Engineer, Engineering, Gearbox, Assembler, Reading, Tadley, Newbury, Thatcham, Basingstoke. Mechanical Fitter / Assembler (Gearboxes / Motors). Are you a Mechanical Fitter/Assembler with experience in gearbox

Mechanical Design Engineer | Mechanical Building Services | Building Services Design | HVAC | Heating Systems | Ventilation | Cooling Systems | AutoCAD | Design Calculations | Technical Specifications | Energy Efficiency | Low Carbon Technologies | Site Surveys | Feasibility Studies | Project Manage

Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. Mechanical Qualifications Desirable. Mechanical Experience Desirable.

Earn up to £2,500 extra this Christmas, paid weekly.Join Evri as a self-employed courier and earn extra bonuses on top of your usual parcel payments during our busy Christmas season.With potential parcel earnings of £300 - £500+ per week, regular local rounds and early access to ea