Trabajos process engineer en Radcliffe - Page 2Crear alertas

Position: Shift Engineer Location: Bolton, Greater Manchester Salary: £41,253.00 Shift Pattern: Rotating, Monday to Friday - 06:00 - 14:00/14:00 - 22:00 You will be responsible for repairing equipment breakdowns as quickly and effectively as possible to limit the impact on the site's production. Be proactive in continuous improvement and planned maintenance programs for all site equipment and processes. You will have a background in food production/FMCG. Principal Tasks: Identify and rectify as efficiently as possible any faults on the production process in line with current health and safety legislation. Notify the Factory Engineer of the anticipated "downtimes", complete report sheets and record all breakdown details (on task sheets), including time to rectify fault. Carry out planned routine maintenance tasks across the site and rectify any issues found, if time permits. Report any outstanding issues to Factory Engineer for an assessment of consequences and completion plan. Be proactive in the equipment / process continuous improvement programme and be aware of equipment performance trends such as efficiency, quality and waste. Carry out routine equipment installations as required and be involved in or be familiar with any project plans for the installation of new equipment. Responsible for the quality of information recorded in the shift log and effective communication at shift change. This ensures unfinished tasks can be safely completed and the previous shift issues understood. Any changes made to PLC programmes will be backed up and any other changes made to equipment installations or settings must be updated in the required files or manuals. Liaise with the Factory Engineer (Store) using all available information to determine availability of required spares. If the outcome is a non-stock item then the existing ordering procedure should be followed. Out of normal hours the existing stores procedure should be followed and if a part requires ordering it must be reported to the Factory Engineer who will determine the urgency and consequence. All items for refurbishment or that have been repaired must be correctly labelled and stored in the allotted place. Contacting external suppliers / technical support may be required out of normal hours to liaise on problems. As part of the team-working environment assist in educating operators in the mechanical operation of their equipment ensuring that health and safety legislation is complied with. This will allow them to assist with basic maintenance practices and ensure the correct set-up procedures are followed for their equipment. Ensure that Company health and safety standards are complied with and safe working practices are always adopted. Carry out any other reasonable duties suitable to the level and responsibilities of this role as required.About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Manufacturing Engineer Location: Bury, Haslingden, Accrington Salary: Competitive Salary + 25 days holiday + pension + early Friday finish The Job: • The role is to oversee low volume manufacturing of special purpose machinery and equipment to ensure quality, customer service levels, project milestones and delivery times are met., • Liaise with internal stakeholders such as design, assembly, operations, testing., • Liaise with customers regarding timelines and specification changes., • Help coordinate PDI or FAT, • Working in a clean, modern, professional and friendly environment The Person: • Good understanding of manufacturing processes., • Understand some technical elements of engineering as well as quality and compliance., • Good communication skills., • Varius backgrounds considered – Mechanical Engineer, Project Engineer, Quality Engineer, Process Engineer, Process Improvement, Lean, continuous improvement, Design, Assembly. To apply send CV to Tim Fawcett at Control Recruitment Solutions or contact the office number

Graduate Civil Design Engineer Manchester (Walkden / Bolton area) Salary: Competitive (DOE) + Clear Progression to Chartership If you're a Graduate Civil Engineer looking for hands-on project exposure, real responsibility early on, and a clear route to Chartership, this is one of the better opportunities in the Manchester market right now. Bennett & Game are working with a well-established, award-winning multidisciplinary consultancy with over 35 years' success. Their Manchester team offers a close-knit, supportive environment (c.8 staff locally) backed by a wider business of 60+ professionals-giving you the best of both worlds: personal mentorship + larger project exposure. You'll be working predominantly within the housing development sector, gaining exposure across drainage, highways, and infrastructure design from day one. This is an ideal opportunity for recent graduates or those with up to 2 years' experience looking to develop their career towards chartered status in a supportive and flexible work environment. Graduate Civil Design Engineer Salary & Benefits Competitive Salary with good scope for advancement Holiday 21 + 10 bank holidays. Flexible working -options around home/office working after probation Free Parking Working hours 9am till 5.30 Positive work-life balance with a strong team ethic Training and Professional Development opportunities encourage all staff to continue learning and building knowledge through external training / CPD. Graduate Civil Design Engineer Job Overview Support the delivery of civil engineering design projects within the development sector Assist with the day-to-day running of projects, progressing towards lead responsibility Work closely with clients, local authorities, and contractors Prepare and progress technical submissions (S38, S278, S104 agreements) Develop design work across highways, drainage, and SuDS schemes Respond to technical queries and support project delivery to deadlines Collaborate within a multidisciplinary team on varied development projects Graduate Civil Design Engineer Job Requirements Degree qualified in Civil Engineering (or similar) 0-2 years' experience (consultancy or development environment ideal) Strong ambition to achieve Chartership (ICE or equivalent) Knowledge or experience of: AutoCAD Drainage design (e.g. Causeway Flow) Highway design (e.g. PDS or similar) Understanding of SuDS principles and UK design standards Strong communication skills with a proactive, "can-do" approachBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Job Title: Quality Inspector Location: Farnworth, Bolton, BL4 0AN Salary: £29,000 - £31,000 per annum Job Type: Full time, Permanent Working Hours: 38 Hours Per Week About Us: As one of the UK's leading heating element manufacturers, Backer Heatrod offer a wide range of products from standard straight elements through to customer bespoke equipment. Our success is built on our ability to satisfy our customers by providing quality products, outstanding customer service and delivering on time every time! We combine a growing industrial manufacturing base with a thriving distribution business. About the Role: Are you passionate about maintaining high standards and ensuring products meet strict quality requirements? Do you thrive in a fast-paced manufacturing environment where attention to detail and continuous improvement are key? If so, we'd love to hear from you. We're looking for a proactive Quality Inspector to support our growing team by carrying out quality inspections, monitoring processes, and helping drive ongoing improvements throughout the business. This is a fantastic opportunity to make a real impact on product quality and operational excellence. What you'll be doing: As our Quality Inspector, you will play a key role in safeguarding product quality by: Conducting internal audits Performing goods-inward, product, and equipment quality inspections Carrying out daily process-based quality checks and recording results Monitoring scrap levels and investigating root causes Raising and progressing corrective actions with suppliers Supporting validation of supplier corrective actions Overseeing internal and external calibration of equipment Assisting in the creation of SOPs and work instructions Managing and reporting on customer returns Undertaking projects focused on continuous improvement and Lean principles Ensuring clear, accurate documentation and communication across teamsWhat We're Looking for: Essential: ISO 9001 Internal Auditor qualification Minimum 2 years' experience in a similar role Ability to read technical drawings Experience using basic measuring equipment Intermediate MS Office skills Strong time management, attention to detail, and QMS record-keeping abilities Excellent communication skills Confident decision-maker Organised, able to work in a busy environment, and willing to challenge where neededDesirable: IOSH / ISO 14001 / ISO 45001 internal auditor training 5S experience Familiarity with ISO 9001/14001/45001 systems Knowledge of root cause analysis toolsWhy Join Us? You'll be part of a supportive, collaborative team working to uphold high-quality standards across the business. We value professional development and encourage continuous learning, reflective practice, and the chance to grow your skills. You'll also play an essential role in strengthening our quality culture-helping us deliver excellence to customers and improve processes at every stage. Benefits: 25 days holiday plus bank holidays Pension scheme Cash Health Plan Cycle to work scheme Company life assurance Full training and support Opportunities for career progression Friendly and inclusive working environment On-site parkingPlease Note: No agencies. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of: Quality Assurance Specialist, Process Improvement Engineer, Quality Systems Engineer, Manufacturing Quality Analyst, Product Quality Inspector, Manufacturing Quality Assurance, may also be considered for this role

We are looking for a Production Engineer to join a well established UK manufacturer based in Bolton that is part of a global organisation. The successful candidate will play a key role in supporting production and engineering teams. As a Production Engineer, you will ensure products are manufactured to specification, support new product introduction, maintain tooling and fixtures, and drive continuous improvement initiatives. This role offers a hands on opportunity to work closely with multiple departments and contribute to the efficiency and quality of manufacturing processes. Salary: £36,000 – £42,000 per annum (dependent on experience). Hours: Monday–Thursday 07:30–16:00, Friday 07:30–12:50 (38 hours per week). As a Production Engineer, your main duties will include: * Managing the lifecycle of production tooling and fixtures, including maintenance, calibration, and ongoing optimisation. * Creating, editing, and validating CNC programs using Fanuc, Heidenhain, or Siemens systems. * Optimising CNC milling and turning operations, from method selection to cycle time reduction and quality assurance. * Leading continuous improvement initiatives with measurable targets, including cycle time, scrap, changeover, and right-first-time performance. * Designing and implementing jigs and fixtures to improve repeatability, ergonomics, and shop floor safety. * Providing hands-on support for setup issues, technical bottlenecks, and process deviations. * Training operators and setters on new tooling, CNC programs, and best practices. * Maintaining accurate technical documentation including tool sheets, routings, BOMs, and manufacturing drawings. * Collaborating with Planning, Design, Quality, and Maintenance teams to ensure smooth production flow. * Supporting industrialisation and introduction of new products into manufacturing. Requirements: * HND, HNC, Degree, or equivalent in Mechanical, Manufacturing, or related engineering discipline. * Experience in production or manufacturing environments. * Proficiency in using lathes and milling machines. * The ideal Production Engineer will be proactive, technically confident, and focused on improving manufacturing processes. * Experience with CNC programming on Fanuc, Heidenhain, or Siemens systems. * Skilled in using standard power tools (drill, grinder, jigsaw). * Ability to read and interpret technical drawings. * Strong problem-solving skills with a practical, hands-on approach. * High attention to detail and good organisational ability. * Effective communication and teamwork skills. * Familiarity with continuous improvement techniques. * Experience using CAD software (e.g., SolidWorks, AutoCAD Inventor) is desirable but not required. Production Engineer Benefits: * 25 days holiday plus bank holidays. * Company pension scheme. * Cash Health Plan and Employee Assistance Programme, Cycle to work scheme, Life assurance. * Full training and ongoing support. * Opportunities for career progression. * Friendly and inclusive working environment. * Free onsite parking. This Production Engeering role is being advertised by S&D Trade Recruitment who are operating as an employment business and are acting as an employment agency on behalf of our client. Please apply with currrent CV and ask for Shelley in the office

Maintenance Engineer Bolton 3 Shift Pattern £48,000 + Bonus A leading global automotive supplier specialising in advanced vehicle components and systems for major OEMs worldwide. Join a world-class team driving the future of automotive manufacturing We are a premier Tier 1 automotive supplier with a strong presence in the UK, delivering innovative, high-quality components to the world's leading vehicle manufacturers. Our Bolton facility is a key high-volume production site focused on precision assembly and testing systems, and we are now seeking an experienced Maintenance Engineer to join our dynamic engineering team. This is a hands-on role ideal for a proactive, skilled tradesperson who thrives in a fast-paced, high-output manufacturing environment. You will play a critical role in maximising equipment uptime, driving continuous improvement, and supporting our commitment to world-class production standards. Responsibilities – Maintenance Engineer Troubleshooting, repair, and maintenance of high-volume PLC-controlled production equipment Planning and performing preventative maintenance on critical assets Improvement and modification of assembly/test equipment and transfer systems Service and maintenance of electrical and mechanical site services/plant Supporting the installation and commissioning of new equipment Experience/Qualifications - Maintenance Engineer Ideally qualified to ONC/HNC level (or equivalent) in Mechanical/Electrical Engineering, supported by City & Guilds Part 3 (or similar) and NVQ Level 2 & 3 Time-served apprenticeship in a relevant engineering discipline Significant hands-on experience (minimum 2+ years) in high-volume manufacturing environments Proven track record in equipment repair, maintenance, and process improvement Experience in fitting, fabrication, and machining is highly advantageous Strong background in maintenance and fault-finding on PLC-controlled and robotic high-volume equipment (ideal but not essential) Solid experience maintaining and diagnosing faults in hydraulic and pneumatic systems Benefits - Maintenance Engineer Discretionary annual Bonus 7.5% up to 5.5% employer contribution EV Scheme: through salary sacrifice and free charging at site Medical Insurance Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

Mechanical Design Engineer Permanent; full time Bury; Hybrid Do you have experience designing HVAC systems within building services or similar environments? Are you confident using AutoCAD, Revit MEP or similar design tools? Do you have a degree in Mechanical or Building Services Engineering or equivalent? What's in it for you Salary £50,000 to £60,000 depending on experience 25 days holiday plus bank holidays; option to buy or sell up to 5 additional days Pension; 5% employee contribution and 6% employer contribution Single private healthcare Life assurance; 4x salary Group income protection Health cash plan 36.5 hour working week; early finish at 2pm on a Friday What will you be doing? Design HVAC systems including ductwork, piping and equipment layouts Carry out heating and cooling load calculations using industry standard software Select HVAC equipment and produce detailed technical specifications Develop design drawings and documentation using AutoCAD, Revit or similar Ensure compliance with building regulations, CIBSE and BS EN standards Work closely with project managers and multidisciplinary engineering teams Attend site for inspections, commissioning and troubleshooting when required Support cost estimation and procurement activities Incorporate energy efficient and sustainable design principles Keep up to date with new HVAC technologies and industry developments Where will you be doing it? Established engineering business with over 150 years of heritage; specialists in HVAC and ventilation systems for safety critical environments; delivering projects across energy, defence and transport sectors; collaborative design environment working alongside experienced engineers and project teams What will you need? Degree in Mechanical Engineering or Building Services Engineering or equivalent Experience in HVAC design within a building services or engineering environment Proficiency with AutoCAD, Revit MEP and BIM workflows Experience with HVAC design tools such as Hevacomp or similar Strong understanding of thermodynamics, fluid dynamics and heat transfer Knowledge of CIBSE and relevant UK building standards Ability to carry out detailed engineering calculations and problem solving Strong communication skills and ability to manage multiple projects Ideally working towards or holding CEng or CIBSE membership Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract. Looking for somebody with substantial test engineering experience. Diagnosis of test failures Testing experience down to component level The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £37.00ph (Umbrella). Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Development and Production Test Engineer – Electronic / Electrical Job Description: Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications): HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test. A good understanding of measurement and test principles, and associated test equipment. An understanding of the typical CADMID product lifecycle for test equipment is desirable. An understanding of RF and microwave technology at subsystem level would be an advantage. An understanding of Environmental testing (including ESS) would also be an advantage

Multi-Skilled Maintenance Engineer Textiles Manufacturing Critical Industry Bury Monday-Thursday, 6am-4pm (4-Day Week) £37,440 - £41,600 per annum Full-Time | Permanent Engineer the Reliability Behind Critical Industries We're partnering with a market-leading textiles manufacturer supplying into highly regulated and safety-critical sectors including defence, aerospace, and pharmaceuticals. This is not just another maintenance role, this is an opportunity to take full ownership of site engineering across specialist manufacturing operations, ensuring machinery, plant services and facilities operate safely, efficiently and without disruption. Due to the nature of the environment, experience working within a chemical, coatings, laboratory or process-driven engineering setting is essential. The Opportunity As Group Maintenance Engineer, you'll be the go-to technical expert on site. This is a hands-on, autonomous role where you'll lead preventative maintenance strategy, respond to breakdowns, and coordinate contractors, without direct line management responsibilities. You'll play a key role in protecting uptime across a business that supports some of the world's most demanding industries. Responsibilities: * Delivering and managing PPM schedules across manufacturing equipment and site services * Diagnosing and resolving mechanical and electrical faults to minimise downtime * Maintaining critical site services (HVAC, compressed air, lighting, building fabric, etc.) * Overseeing statutory inspections and ensuring full compliance * Managing and supervising external contractors, enforcing safe systems of work * Tracking maintenance spend and identifying efficiency and continuous improvement opportunities * Providing occasional engineering support to a nearby sister site Experience: * Proven hands-on maintenance experience within a manufacturing or industrial setting Essential: Experience working in a chemical, laboratory, coatings, or process-based engineering environment * Strong mechanical and/or electrical fault-finding capability * Experience planning and executing PPM strategies * Confident coordinating contractors and maintaining H&S standards * Comfortable working independently and taking full ownership of site engineering Desirable: * Background in textiles, coatings, or laminating * Experience managing statutory inspections * Lean / Continuous Improvement exposure * IOSH qualification Benefits 4-day working week (every Friday off) Autonomous role with real ownership Stable, growing manufacturing business Supporting globally critical industries If you're a practical, self-sufficient engineer who thrives in specialist manufacturing environments and enjoys taking full responsibility for site reliability. I would love to speak with you! Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

An opportunity has arisen for an experienced Manufacturing Electronics Engineer to join our manufacturing team in Bolton. Fantastic opportunity to support across all stages of product assembly Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Your new company A well‑established and growing process safety consultancy is expanding its UK presence and technical capability. Operating across high‑hazard industries, the team provides specialist process safety, engineering and management consultancy services to a broad client base within chemical manufacturing and associated sectors. With a strong hub in the North West and flexibility to be based from other UK offices, the business is focused on continued growth, technical excellence and professional development. Your new role As an Princiapal Process Safety Consultant, you will play a key role in delivering and managing a diverse portfolio of client and internal projects. You will work closely with clients to improve the design, operation and maintenance of hazardous process facilities, applying your site‑based experience to a wide range of industries.This is a customer‑facing role, involving work across multiple projects simultaneously, both independently and as part of multi‑disciplinary teams. Projects will span high‑hazard environments including chemical manufacturing, bulk storage, warehousing and related facilities across sectors such as chemicals, petrochemicals, pharmaceuticals, explosives, waste‑to‑energy and hydrogen‑related industries supporting energy decarbonisation initiatives. The role will involve travel to client sites across the UK, ranging from short visits to longer site‑based assignments as required. Key responsibilities will include: Developing process engineering standards, methodologies, procedures and supporting tools for clients. Conducting audits and technical reviews to assess compliance between documented procedures and site practices. Leading and participating in hazard identification and risk assessment studies, including HAZID, HAZOP and LOPA. Providing process engineering input to design reviews, EHS studies and engineering projects. Delivering DSEAR‑related consultancy and regulatory support. Undertaking on‑site surveys of process plant to verify documentation and produce as‑built information where required. Supporting the preparation of COMAH safety documentation and risk assessments. Managing project delivery to agreed quality, budget and timescale requirements while ensuring client expectations are met. Contributing to the development of cost‑effective, practical solutions that support client sustainability and growth objectives.What you'll need to succeed To be successful in this role, you will ideally have: A degree in Chemical Engineering or Process Engineering. Demonstrable experience within chemical or process‑based manufacturing environments, including exposure to operational plant. Strong knowledge of UK process safety legislation and standards, such as COMAH, DSEAR and associated guidance. Excellent written and verbal communication skills, with the ability to engage effectively with clients and internal stakeholders. A collaborative, team‑focused approach, with the confidence to contribute within multi‑disciplinary project teams. High personal integrity, sound professional judgement and a proactive approach to problem solving.What you'll get in return You will join a supportive consultancy environment that places strong emphasis on technical development and career progression. A competitive salary and comprehensive benefits package are offered, alongside flexible and hybrid working arrangements. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Multi Skilled Maintenance Engineer DAYS 4 DAY WEEK Monday to Thursday DAYS only Bury, Greater Manchester 41k - 45.5k Base salary DOE 1.5x overtime for anything over 40hrs. Job Purpose: An industry leader in the speciality textiles industry is seeking a proactive multi-skilled maintenance engineer to minimise downtime, conduct planned maintenance and continuous improvement tasks across site. The successful candidate will be a hands on, Multi-Skilled Engineer with either a mechanical or electrical bias and have a desire to improve machinery availability, life cycle costs and efficiency. Key Responsibilities: Carry out planned and reactive repairs to a variety equipment and control systems Act as the engineering representative on the night shift. Carry out planned Maintenance activities. Minimising downtime and contributing to the achievement of production targets Supervision of outside contractors/service engineers and tradesmen as required Management of small projects such as equipment installation or staff training To develop and implement process improvements Requirements: Completed a recognised city & guilds, NVQ 3 or equivalent electrical or mechanical engineering apprenticeship Electrical/ mechanical skills with proven competence in both disciplines. Ability to identify and correct faults within electrical, pneumatic and mechanical systems Be able to demonstrate a continues improvement mindset If you have the skills and experience required, we'd love to hear from you! Apply Now! #INDENG

Sales Engineer We are looking for a Sales Engineer to join a well established manufacturing business based in Bolton. The company produces a diverse range of products for industrial applications, supporting both standard solutions and tailored customer requirements. This position is mainly office based but involves regular travel to customer locations across the UK. You will meet clients in person for technical discussions, product demonstrations, and commercial negotiations, so a full UK driving licence is essential. The role requires managing multiple product portfolios, providing technical guidance throughout the sales process, and working closely with internal teams to ensure projects are completed successfully. Salary: £36,000 – £45,000 per annum. Job Type: Full-time, Permanent. Working Hours: 38 hours per week; Monday to Thursday 07:30 to 16:00 and Friday 07:30 to 12:50. As a Sales Engineer, you will: * Oversee sales activity for multiple product lines across the UK. * Maintain and strengthen customer relationships through regular face-to-face meetings. * Identify potential business opportunities and support account growth. * Deliver technical guidance and commercial support during the sales process, including proposals, quotations, and contract discussions. * Attend client sites for technical presentations, demonstrations, and consultations. * Work closely with Engineering and Operations teams to ensure smooth project execution. * Track market trends, competitor activity, and technological developments to inform sales planning. * Support the preparation of tenders and bids, including reviewing specifications and coordinating pricing. * Keep CRM records up to date, monitoring leads, opportunities, and follow ups. * Negotiate commercial terms, pricing, and delivery schedules to achieve business targets. * Represent the company at industry events, exhibitions, and trade shows to raise profile and generate new leads. * Focus on retaining existing customers while actively driving growth. * Handle customer enquiries, complaints, and quality issues efficiently. * Apply numerical and analytical skills when preparing quotations, pricing, and sales reports. * Use company provided tools, including laptop and mobile phone, to manage daily activities. Sales Engineering Requirements: * HNC or Degree in Engineering, Manufacturing, or a related technical discipline. * Experience in customer facing technical or external sales roles, ideally with a focus on new business development. * Full UK driving licence required for pool car use and willingness to travel regularly. * Familiarity with ISO 9001 or other quality standards. * Strong IT skills, including Microsoft Office, CRM systems, and data reporting tools. Solidworks would be advantageous. * Numerical and analytical skills to interpret technical specifications, prepare quotations, and manage sales reporting and pricing decisions. * Commercial awareness, manage multiple projects, and achieve sales targets. Sales Engineer Benefits: * 25 days annual leave plus bank holidays. * Access to a Cash Health Plan and Employee Assistance Programme. * Cycle to Work scheme and wellness initiatives. * Comprehensive training and ongoing support for career development. Opportunities to progress within the business. * On site parking and easy commute options. Company pension scheme with auto enrolment. Life Assurance coverage. This Sales Engineer position is advertised by S&D Trade Recruitment, operating as an employment business and acting as an employment agency on behalf of our client. Please apply with your current CV and call Shelley in the office

Overview Are you looking for a position where you can make a difference, constantly learn new things and be at the forefront of technology,working aspart of the Aviva family? Responsibilities TheRole: Solus Repair Consultants are pivotal in our customers story, working in partnership with our skilled production team to get the best outcome. Reporting directly to the site Production Lead, it is our Solus Repair Consultants that record and estimate all repair information while safeguarding customer satisfaction. Carry out computerised estimates using Audatex Communicate with customers to provide repair information and an indication of completion time Compile all relevant information and complete supporting documentation Record all estimate / repair information on the Advance system Monitor progress of the vehicle through the repair process Negotiate estimates with the Aviva Engineer when required Discuss claim related issues with the Aviva Engineers To identify opportunities for non-insurance related repairs To conduct mobile and drive by estimates To maintain and secure allocated equipment To assist other team members as and when requiredQualifications Desirable qualifications and experience: Experience in general production or automotive body repair environment Be able to lead, motivate and inspire your team Excellent communication and interpersonal skills Ability to work to group and site key performance measures Embed a team working culture Able to identify the cause of issues and blockages, which interrupt the flow of work Completion of performance reviews and developmentWho are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access.At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days

Job Title: Senior Electronics Engineer Location: Bolton, Greater Manchester Type: Full-time, Permanent Salary: up to £65,000 base Ready to take your engineering career to new heights? We are hiring on behalf of an industry-leading electronics company that designs and manufactures innovative, tailor-made electronic solutions. Based in Bolton, this thriving business is seeking a Senior Electronics Engineer to join its dynamic team and contribute to high-impact, cutting-edge technologies. As a Senior Electronics Engineer, you'll be instrumental in developing advanced hardware systems. You'll work across multidisciplinary teams to bring products from concept through development and into production. This hands-on technical role combines engineering depth with leadership potential—perfect for someone who enjoys mentoring and driving collaboration. Key Responsibilities: Design hardware systems, schematics, and PCB layouts Lead product development projects within structured frameworks Translate project requirements into actionable objectives Collaborate with teams including Field Ops and Manufacturing Support prototyping and New Product Introduction (NPI) Maintain documentation and ensure ISO9001 process compliance Investigate and integrate emerging technologies with the Tech team What We Need From You: Minimum 5 years of experience in hardware design (ideally using Altium) Proven track record in testing and validating hardware components Skilled in digital and analogue circuit design, especially microcontrollers Understanding of comms protocols like LTE, Ethernet, CANBus, I2C Bonus: Familiarity with control systems, sensors, and LCDs Comfortable with full lifecycle development and project planning Programming experience for microcontrollers (preferred) Personal Traits: Strong analytical mindset with a solutions-driven approach Adaptable across multiple projects and evolving tech platforms Confident communicator who thrives in cross-functional teams Passionate mentor and natural team leader Detail-focused with enthusiasm for tech innovation This is an exciting opportunity to join a company where creativity fuels progress. This is a space for engineers who love challenging the norm and shaping future-forward products. With a collaborative, supportive culture, the team champions personal growth and big ideas—all while making an impact on the global tech scene. Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! DragonFire has been and continues to be a boundary pushing weapon system development programme that has significant industry and customer engagement. Thus far the programme has been aimed at developing the UK's first Laser Directed Energy Weapon (LDEW) concept demonstrator, achieving significant success recently with several highly publicised trials activities. Following on from these successes MBDA is looking for flexible and motivated candidates to continue to develop DragonFire into a world class, deployable, LDEW air defence system. Our ambitious plans involve parallel and interleaved streams of pioneering technology experimentation and rapid weapon system development, providing opportunities across the key weapon system domains of Systems Engineering: requirements, design, performance analysis and certification. Salary: Circa £55,000 - £65,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary, depending on grade. Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The Opportunity The Laser Source Project Engineer (RMO) will work with an external partner to deliver the Laser Source Sub-System for DragonFire. The Laser Source is a high power electro-optical assembly mounted in a mechanical assembly. The Laser Source generates the high energy laser beam. This is integrated to the Beam Director and integrated into a transportable container assembly (both developed by other partner companies). Reporting to the project sub-system lead; this role will be focused on the acceptance and delivery of the Laser Source sub-system, its final assembly, integration, and test. A proven record of complex sub-system delivery and integration is desirable, as is a working knowledge of high energy lasers. The Laser Source RMO will be responsible for: interface management with the external partner, both programmatically and technically; acceptance of and delivery of the Laser Source to final assembly, integration, and test; supporting the functional integration of the Laser Source within the wider sub-system definition; project development in order to continue the evolution of DragonFire.What we're looking for from you: Individuals who have experience in or can demonstrate their ability to: Operate in the early lifecycle of a project, to drive technical direction for the equipment under development and clarify stakeholder needs Worked with third party suppliers and developed technical statements of work and deliverables Develop complex electrical equipment or subsystems and ensure the emergent design is compliant to the project requirements Proactively engages stakeholders and builds relationships that will further the project Lead technical work packages alongside experienced project managers, to demonstrate progress and balance technical risks.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in the support of production activities at our state of the art manufacturing facilities. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. What we're looking for from you: You'll need to demonstrate a number of the following attributes: · Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. · Proven experience in the design of the following disciplines:- · Analogue and Digital Electronics · Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. · Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. · Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. · Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary: Circa £72 ,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension: maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities.What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Assystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 6,750 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. Drawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked second in the world for nuclear engineering. To ensure a viable, efficient, and reliable energy future for all. Job description Role Purpose Provide engineering expertise in the design, development and verification of control systems used in nuclear facilities. The role covers programmable logic controllers (PLCs), distributed control systems (DCS), safety-related I&C functions and supporting systems such as SCADA/HMI. The engineer ensures that control system implementations are safe, compliant and fully traceable to nuclear requirements throughout the project lifecycle. Key Responsibilities Develop control system architectures and functional designs that support plant operation, automatic sequences, interlocks and protection functions. Produce technical documents including control philosophies, functional requirements, logic descriptions, cause and effect diagrams and interface specifications. Configure and programme PLC, DCS or specialised control platforms in compliance with nuclear lifecycle expectations and relevant standards. Collaborate with EC&I, process, mechanical, safety and human factors engineers to ensure consistent system behaviour across interfaces. Integrate control logic with SCADA/HMI systems, historians, networks and field instrumentation. Apply good practice in alarm handling and annunciation, aligning with EEMUA 191 and site alarm strategies. Perform verification and validation tasks including peer review, simulation, software testing, FAT, SAT and commissioning support. Develop test specifications and ensure that test coverage aligns with requirements, functional hazards and safety classifications. Maintain configuration control, software versions, coding standards and technical baselines within nuclear quality frameworks.Essential Skills and Experience Control systems engineering experience in a regulated industry, ideally nuclear, defence, energy or similar. Experience producing control philosophies, logic diagrams, sequence descriptions and similar deliverables. Ability to interpret P&IDs, process narratives, safety functional requirements and mechanical schematics. Strong understanding of PLC/DCS programming methods, including structured text, ladder logic, function block and sequential function charts. Experience with verification, testing, simulation or model-based approaches for control logic validation. Knowledge of nuclear I&C lifecycle requirements, safety classification and applicable standards such as IEC 61513, IEC 60880, IEC 61508 and IEC 61226. Familiarity with alarm management principles and experience applying EEMUA 191.Qualifications Knowledge of nuclear new build control architectures, reactor island control systems or balance of plant systems. Experience with digital twin concepts, advanced simulation or MBSE approaches. Experience with cyber security requirements for nuclear I&C systems. Chartered Engineer status or working towards it.Additional information BPSS and SC required Ability to travel Assystem offices and customer sites within UK. To undertake work packages supporting major UK and international Nuclear Clients.Due to the nature of work to be undertaken applicants will be required to meet certain residency criteria in order to attain a minimum level of UK security clearance if not already security cleared to a minimum SC level. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Mechanically Biased Maintenance Engineer – FMCG Location: Manchester Salary: £53,500 + Pen + Overtime 4on 4off (2 Days 2 Nights) Reference: JO7061/PW The Company An excellent opportunity has arisen with one of the UK’s instantly recognisable manufacturers, who are an International employer specialising in the production of private label household products for the consumer and chemical industries using plastic blow Moulding technology. They are one of Europe’s leading manufacturers within their market place with over 85 years experience and over 5000 employees Europe wide. The Role You will have served a minimum of a full apprenticeship in mechanical engineering and have experience working within planned and preventative maintenance schedules, working within a high speed automated environment. There will be lots of fast moving machinery such as blow moulding machines, flow wrappers and labelling machines, together with packaging and conveyor systems. The successful candidate will also provide technical expertise and support regarding pipe work rationalisation and steel fabrication using specialist welding skills. You will therefore have the following skills and qualifications. KEY SKILLS • Apprentice Trained Engineer in Mechanical Engineering, • Experience of Hydraulic & Automated machinery, • Understanding of PPM systems In addition, you will need the ability to work within a team or autonomously as required. You will also have a strong multi-skilled background with the ability to fault find on a variety of production equipment. There will be a great deal of technical development, which will aid your longer term career prospects within this instantly recognisable group. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no (phone number removed). Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom

Electrical Bias Maintenance Engineer Location: Heywood Salary: £40,000-£44,000 DOE Benefits: Overtime, Bonus Scheme, Healthcare, Pension, Life Assurance & more Hours: Monday-Friday A well‑established UK manufacturer is seeking a Multi‑Skilled Maintenance Engineer with a strong electrical background to join their flagship Heywood facility. You'll be working with modern, high‑spec machinery as part of a collaborative engineering team focused on continuous improvement and operational excellence. This is a forward‑thinking organisation that invests heavily in staff development, training, and long‑term progression. Role Overview Carry out both planned and reactive maintenance to maximise OEE, minimise downtime, and enhance equipment reliability Work closely with engineering colleagues, production teams, and other departments to ensure smooth operations Maintain exceptional health & safety standards and promote safe working practices Identify improvement opportunities and support the implementation of process enhancements Contribute to ongoing engineering and improvement projects Skills & Experience Required Time‑served Electrical Maintenance Engineer Experience within Food, FMCG, Packaging, or similar fast‑paced industrial environments is highly desirable Comfortable working in a busy, high‑demand setting Strong team player with a proactive attitude toward learning and development Capable of working independently when required Open to internal training and upskilling opportunities About the Company This organisation is a recognised leader in its sector, with a strong national footprint and a growing customer base. They offer long‑term stability and a secure career path for engineers who are motivated by technical challenges and continuous improvement. If you're looking for a reliable, progressive employer and a role that supports your professional growth, click the apply link to submit your application. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

CNC Programmer / Manufacturing Engineer (Training & Progression) £36,000 - £45,000 + Technical Training + Career Progression + 33 Days + Profit Bonus + Life Insurance + Cash Health Factory based, commutable from Bolton, Farnworth, Kearsley, Little Lever, Walkden, Radcliffe, Bury, Swinton, Salford and Manchester and surrounding areas Are you from a CNC background looking to drive process improvements whilst being heavily invested in through technical training, scope to progress your career all whilst overseeing and improving bespoke manufacturing lines where you will work towards becoming a technical expert? This is an exciting opportunity to join a highly technical team with the vision of progressing into a lead position and become a go to specialist, through excellent training and support all whilst overseeing exciting projects and having a crucial impact on their success. This company have over 70 employees but are part of a global group, they are rapidly expanding, due to company investment and are looking for a Production Engineer to join their company and become a part of their close-knit team. This role will suit someone from a CNC background looking to drive process improvements whilst being heavily invested in through technical training, scope to progress your career all whilst overseeing and improving bespoke manufacturing lines where you will work towards becoming a technical expert? The Role: *Managing the Production legislation, Lean and Six Sigma *Implementing, Managing, and Improving production standards across the manufacturing line *Opportunity to further your career and technical develop The Person: *Previous engineering background within CNC *Looking for a full-time position *Looking for a role where you can manage, oversee and implement changes Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harry Heal at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract. This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at their state of the art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. You will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. Whilst the primary aim is focused on highly advanced module missile programmes and subsystems, there is also scope to work on other unique opportunities including support to launcher assemblies. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Skillset/experience required: To be suitable for this role, Individuals will be able to demonstrate a number of the following attributes: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines: Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. You’ll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Experience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential. Investigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions

Fire Alarm Service Engineer - Engineering - Up to 43k + Overtime + Vehicle + Package We are recruiting for a growing organisation who are looking for Fire Alarm Engineer's to work in their Service and Maintenance team, working alongside other specialist engineers in the Lancashire area of the UK to maintain and install Fire Alarm Systems. This role is a field-based role, Performing PPM service calls and repairs, and some new install works, there is an on-call rota 1 in 5 currently across the region. Fire Alarm Service Engineer - Package Salary up to £43 + Bonus + Package Door to door On call payment 1 in 5 weeks OT time half weekdays, and double Sundays and BH Death in Service *4 Sick pay 6 months full pay + 6 months half Private Pension Van - private mileage 24 Days holiday rising to 28 with service + Bank Holidays Fire Alarm Service Engineer - Requirements Used to performing PPM and Repairs to various Alarm Systems - Essential 2/3 Years Experience - Essential FIA or Equivalent trained - Essential Full Driving Licence - Clean is Desirable CRB Checked - Essential IT Skills and Report Writing - Essential This would suit someone who has worked within Fire & Security either installing or servicing alarms. We will accept applications from those who have worked as a Fire Alarm Engineer, Fire Technician, Senior Fire Alarm Engineer, Fire Engineer, Alarm Engineer, Alarm Technician, Fire & Security Service Engineer, Electric Fire Engineer, Security Alarm Engineer, Service Engineer, Mechanical Engineer, Electrical Engineer, Multiskilled Engineer, Senior Fire Engineer. Russell Taylor acts as an employment agency in respect of this position. Please note, due to a high volume of applications, you may not receive a response if unsuccessful. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

The Principal Maintenance Engineer provides technical leadership in maintaining and improving the reliability of process and ESS equipment. Salary: Circa £50,000.00 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The role focuses on advanced fault finding, applying structured problem solving techniques such as FMEA and RCA to identify root causes of failures and implement long term solutions. Through the use of condition monitoring, data analysis, and continuous improvement methodologies, the role aims to minimise downtime, enhance equipment performance, and support efficient manufacturing operations. Lead Fault finding and diagnostic on complex process and ESS equipment, ensuring rapid identification and resolution of electrical, mechanical, and control system issues Apply structured reliability and root cause methodologies including, Failure Mode and Effects Analysis (FMEA) and Root Cause Analysis (RCA) to identify failure trends and implement long-term corrective actions Drive continuous improvement activities aimed at reducing equipment downtime, improving reliability, and increasing overall equipment effectiveness Implement and manage condition monitoring strategies to proactively assess equipment health, identify potential failures at an early stage, and support predictive maintenance activities Provide technical leadership and mentoring to maintenance engineers and operators, supporting skill development, and best practice fault finding techniques Work closely with production and engineering teams to support the introduction of new equipment, ensuring maintainability and reliability are considered at the procurement stage Develop and maintain maintenance procedures, risk assessments, and technical documentation Compliance with health & safety during all maintenance activitiesWhat we're looking for from you: Minimum HNC qualification in relevant field Proven experience setting up preventative maintenance strategies Knowledge of KPIs for maintenance applications (MTTR, MTBF and system availability) and ability to use data to analyse improvement actions Experience using investigation techniques & conducting route cause analysis SAP experience required - creating maintenance plans & workload schedulingOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Chiller Engineer North England £45,000 - £70,000 per annum A specialist provider of temporary cooling and temperature control equipment, this company provides flexible refrigeration and process cooling solutions for businesses that need reliable cooling without the investment in permanent equipment. Providing industrial chillers, portable air-conditioning units and air handling systems that can be rapidly deployed to support sectors such as manufacturing, healthcare, food storage, events and data centres. Delivering hire packages including delivery, installation, maintenance and removal, along with 24/7 technical support. Key Responsibilities: Work as an individual, diagnosing and repairing a range of refrigeration systems. Be part of a regional service team. Communicate directly with our customers whilst on site. Cover standby duties on a rota. Package: Basic - £45,000 per annum Expected Salary - £70,000 per annum Overtime, door to door & on-call pay 31 days annual leave Pension scheme Continuous training Opportunities What You'll Need: Strong understanding of chillers F-Gas certification (C&G 2079) Excellent communication and time management A strong work ethic, with Health & Safety awareness Interested in hearing more? Call Peter Caulfield on 023 9285 2310 or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline. Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. We are looking for a Design Engineer to join ou

Senior / Principle Process Engineer ( Water treatment ). Broad based knowledge of water chemistry and its use in process gas facilities. Ability to mentor/train early career Engineers in Water Treatment and be the office SME.

Graduate Process Engineer – Chemical Engineering. Communicating project updates to engineering teams. Chemical Engineering degree (2:1 minimum).

Demonstrated ability to operate both independently and as part of a team, encompassing tasks such as production, verification, review, or approval of raw water envelope, influent characterises, process performance reports, process outline design calculations, PFD’s, equipment specifications, proce

We're looking for a motivated Process Engineer to join the Pilot Plant Operations team. Degree in Chemical or Process Engineering. Experience in chemical or related process industries (pilot plant/scale-up a plus).

SRG are supporting a leading manufacturing organisation in the process industries with the hire of a Senior Process Safety Engineer. Role: Senior Process Safety Engineer. In this role, you will help strengthen process safety performance across active sites and ongoing projects.

This role sits between Process and Principal Process Engineers, combining hands-on technical delivery with mentoring and technical leadership. We are seeking a Senior Process Engineer to lead the design, optimisation, and scale-up of processes across R&D, pilot, and demonstration plants. Experience

Supports new Develop control plans consistent with product classification, potential defect types, defect frequency, severity, patient risk, process capability, process controls, etc. Develop, interpret and implement appropriate process monitoring and control methods consistent with the level of pro

Company description:Fantastic challenges.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.Were proud to play a par

This position is responsible for providing technical leadership within the process engineering department for equipment and process design for Seqirus Liverpools products ensuring the engineering solutions meet cost, reliability, schedule, and performance integrity requirements. Additionally, this p

Senior / Principal Process Safety Engineer (permanent role)Location - Belfast, Cardiff, Dundee, Edinburgh, Glasgow, Inverness, Leicester or Liverpool. OverviewOur client, a leading consultancy within the high-hazard engineering sector, is seeking a Senior or Principal Technical Safety Engineer to su

Location: South East (Epsom / London / Peterborough / Cambridge)Contract Type: TemporaryHours: 40 per week, 5 days per weekStart Date: ASAPEnd Date: To be confirmed (dependent on contract)Company OverviewA leading global engineering, infrastructure and project management organisation delivering tech

We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

Silos PFCS Supporting Projects Process Instrument Design Engineer An opportunity has arisen to work within the Silos PFCS Supporting Projects E&I design team delivering, supporting others delivering and checking design packages to meet safety, functional and business needs.

Lead and support process engineering activities across advanced formulation and particle processing technologies. Vector Talent is hiring a Senior Process Engineer to join a specialist pharmaceutical manufacturing organisation working in advanced formulation and particle processing technologies. Str

You will work on all stages of process development, defining process architecture, developing process modules, working with process development tool owners to develop and optimise pixel performance. Seeking a Principal Process Development Engineer with deep expertise in process development, strong a

This role focuses on Computer Aided Process Planning (CAPP) and the creation of a connected digital thread across engineering, planning, and manufacturing execution. Expertise in Computer Aided Process Planning and BOM management at an enterprise level, including data structure design, process flow

We are looking for engineers with strong wastewater process knowledge and experience supporting UK water sector projects. This is an excellent opportunity to join a highly collaborative wastewater process engineering team working on a variety of treatment projects while also supporting operational s

The ideal candidate should be involved in Process Intelligence (Celonis) implementation projects with process data of varying degrees of complexity and for customers across industries. You are responsible for making digital business processes transparent and harmonizing our customers' data flow by u

They are seeking a Principal Process Engineer to take ownership of process engineering solutions, design quality, and technical standards across major water and wastewater projects. Principal Process Engineer – Water Sector. Advance TRS is supporting an engineering contractor who are looking to st

Process Improvement Engineer The Opportunity: Are you a seasoned Process Improvement Engineer who can read and interpret mechanical drawings and work across all areas of design and production to make recommendations change? We can offer a varied and interesting role in a niche automotive engineering