Production technician jobs in OadbyCreate job alerts

Diamond Turning Technician (Fabricator), BlabySalary £28,000 - £35,000 per annum + Annual bonus + Shift Allowance (on top)Hours – alternate weeks 37.5 hours:(every other week)6.00am – 2.00pm (Mon – Thus) 6.00am – 1.00pm (Friday)2.00pm – 10.00pm (Mon – Thurs) 1.00pm – 8.00pm (Friday)Job PurposeResponsible for the manufacture of precision components to exacting customer specifications. You will set, operate and optimise ultra-precision diamond turning machinery with high dimensional accuracy and exceptional surface finish requirements.The role involves machining a variety of materials while maintaining micron and sub micron tolerances, carrying out dimensional and surface quality inspections, and ensuring all components conform to drawing, process and customer requirements.You will be expected to take ownership of your work from machine setup and process preparation through to final inspection, maintaining the highest standards of quality, cleanliness, workmanship and traceability throughout the manufacturing process.Key ResponsibilitiesSet, operate and optimise Single Point Diamond Turning machines to manufacture precision components.Interpret engineering drawings, specifications and manufacturing documentation accurately.Manufacture components to micron and sub-micron dimensional tolerancesInstall appropriate tooling, fixtures and machine parameters for production activities.Verify machine set-up, tooling condition and process parameters prior to manufacture.Produce first off components and conduct in process inspections to ensure process conformity.Monitor machine performance and make appropriate process adjustments to maintain quality and repeatability.Inspect finished components using precision metrology and measurement equipment.Carry out inspections in accordance with applicable standards and customer requirements.Identify defects, contamination, handling damage, scratches, chips or other non conformances and escalate where required.Complete process sheets, inspection records and production documentation accurately.Maintain full product traceability throughout the manufacturing process.Follow Standard Operating Procedures (SOPs), work instructions and approved manufacturing processes.Work effectively both independently and as part of a wider fabrication team.Identify opportunities to improve manufacturing efficiency, quality, yield and repeatability.Support Continuous Improvement and Lean Manufacturing activities.Report equipment issues, tooling concerns, quality problems and process abnormalities promptly.Comply with all company health & safety, quality and environmental procedures.Skills required:· Proven experience setting and operating Single Point Diamond Turning or CNC Lathe machinery.· Experience manufacturing precision components to micron and sub-micron tolerances.· Experience producing and achieving demanding surface finish requirements.· Ability to read and accurately interpret engineering drawings and specifications.· Experience using precision metrology and inspection equipment.· Good understanding of ultra-precision machining principles and process control.· Experience working with controlled manufacturing documentation, SOPs and process sheets.· Understanding of TPM principles and preventative maintenance requirements.· Excellent attention to detail.· Ability to work consistently with small, delicate and high value optical components.· Strong organisational and time management skills.· Ability to work independently and take ownership of work quality.· Strong commitment to quality, accuracy and right first time manufacturing.· Good understanding of health and safety within a manufacturing environment.CNC programming experience related to ultra-precision machining equipment.Knowledge of SPC, process capability and statistical quality techniques.TPBN1_UKTJ

DraughtspersonWe are seeking an experienced Draughtsperson to join a busy engineering team, supporting the design and development of electro-mechanical equipment.Position: DraughtspersonSalary: £30,000 - £35,000 per annumLocation: Leicester, with occasional travel to DerehamHours: 37.75 hours per week - Monday to FridayContract: Permanent, Full TimeClosing date: CVs will be reviewed on a rolling basis, so early application is encouraged.About the roleThis is an excellent opportunity for a Draughtsperson to join an established engineering and manufacturing organisation working across a range of industrial applications.Reporting to the Senior Design Engineer, you will support the Engineering team with the design and development of electro-mechanical equipment, producing accurate technical drawings and design information for manufacture. You will also work closely with Production and R&D, helping to develop solutions that meet customer requirements and industry standards. DraughtspersonKey responsibilities include:Reviewing design requirements and supporting the engineering team with technical aspects of designs and material specificationsProducing engineering drawings, BOMs and other design information for manufactureSupporting R&D activities, including the design and set-up of test equipmentWorking with Production to resolve manufacturing issuesManaging a varied workload and delivering projects to agreed schedules and budgetsApplying relevant design, regulatory and industry standards DraughtspersonAbout youWe are looking for someone with an HNC/HND, engineering apprenticeship or equivalent qualification in mechanical or electrical engineering, together with relevant industry experience.You will have strong engineering drawing skills and a sound working knowledge of 2D and 3D CAD packages, ideally Autodesk. Experience of medium and high-voltage design is required, alongside good problem-solving skills and excellent attention to detail. DraughtspersonExperience of sheet metal, fabrication, mechanical engineering practices or electrical equipment design would be advantageous. DraughtspersonAbout the organisationYou will be joining an established UK engineering and manufacturing business that designs and manufactures specialist electrical equipment for customers across sectors including electricity generation and distribution, industrial automation, marine, telecoms and rail. DraughtspersonBenefits include a discretionary bonus scheme, 4% contributory pension, life insurance, Health Cash Plan, Cycle to Work Scheme, 25 days' holiday plus bank holidays, free onsite parking and an Employee Assistance Programme. DraughtspersonOther roles you may have experience of could include: CAD Draughtsperson, CAD Technician, Mechanical Draughtsperson, Electrical Draughtsperson, Design Draughtsperson, Engineering Draughtsperson, CAD Design Engineer, Design Technician, Mechanical Design Technician or Engineering Technician.TPBN1_UKTJ

Our Leicester cient is looking for 2 Technicians - Tape Testing & Metrology, to join them on a 6 month contract, due to an uplift in work. The roles do have the opportunity to go permanent following the initial timescales needed. Job Type: Full-time Department: Manufacturing / Engineering About the Role We are looking for a Technician - Tape Testing & Metrology to join our UK team and play a key role in the day-to-day testing, inspection and traceability of HTS tape materials. This is a hands-on technical role, responsible for operating tape testing and measurement equipment, carrying out incoming inspection of HTS reels, maintaining accurate test and traceability records, and supporting the Tape Insertion Manufacturing Engineer with production activities. The successful candidate will have a practical, methodical approach, strong attention to detail, and a commitment to quality and accurate data. Key Responsibilities Tape Testing & Metrology Operate the tape test stand and associated tape-star and thickness measurement equipment on a daily basis. Set up and carry out testing and measurement activities in accordance with approved procedures. Accurately record, review and maintain test and measurement data. Identify and escalate abnormal or out-of-specification results. Maintain a clean, organised and controlled testing environment. Incoming Inspection Carry out incoming inspection of all HTS reels received at the UK office before they are released to production. Check reel identification, packaging, bag condition and visual condition. Perform defined measurements and inspections and accurately record results in the relevant database. Maintain full material and reel traceability. Identify damaged, non-conforming or suspect material and ensure it is appropriately held or quarantined. Reel Routing & Material Control Make reel routing decisions in line with defined acceptance criteria, including: o Long-term storage o Production o Quarantine / hold Maintain accurate records of reel status and location. Escalate quality or material issues to the appropriate engineering or quality team. Equipment & Calibration Maintain calibration records for test and measurement equipment. Monitor calibration status and ensure equipment remains within its required calibration period. Maintain test stand consumables and identify replenishment requirements. Carry out routine equipment checks and basic troubleshooting. Report equipment faults and support corrective actions as required. Tape Insertion Support Set up and operate the tape insertion line in accordance with approved procedures. Support the Tape Insertion Manufacturing Engineer with data logging and production traceability. Accurately record process and production information. Support engineering trials, investigations and continuous improvement activities. About You We are looking for someone who is hands-on, technically minded and highly detail-oriented. You will be comfortable working witequipment and following defined procedures while also being able to recognise when something does not look right. You will ideally have: Previous experience in a measurement technician, manufacturing, inspection, testing or metrology environment. Experience using measurement or test equipment. Good attention to detail and a methodical approach to work. The ability to accurately record and manage technical data. An understanding of quality, inspection and traceability requirements. Good practical problem-solving skills. The ability to follow written procedures and work instructions. Good computer skills and confidence working with databases or production records. The ability to work effectively both independently and as part of a wider engineering/manufacturing team. Experience within HTS, superconducting materials, advanced manufacturing, tape processing, metrology or a similar technical environment would be advantageous, but is not essential. What We Offer This is an excellent opportunity for a practical and technically capable Technician to develop their experience within a specialist engineering and manufacturing environment. You will have the opportunity to work closely with engineering and production teams and gain hands-on experience across testing, metrology, material inspection, traceability and tape insertion processes. If you are organised, quality-focused and enjoy working with technical equipment and data, we would like to hear from you. Apply now to join our UK team as a Technician - Tape Testing & Metrology, by sending your CV to Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. JBRP1_UKTJ

Engineering Technician (mech and elec) Manufacturing Leicester £46,500 per annum Your New Employer This is a great opportunity to join a fast-paced manufacturing facility running high-speed, automated production lines. The business places a strong emphasis on safety, reliability and continuous improvement, and offers a genuinely supportive engineering culture where new ideas and challenge are welco... JBRN1_UKTJ

Technician Tape Testing & Metrology | Technician | UK office Focus Run the tape test stand day-to-day. Perform incoming inspection on all HTS reels received at the UK office before they are assigned to production. Support the tape insertion ME with data logging and traceability. Key Deliverables • Daily operation of tape-star and thickness measurement equipment, • Incoming inspection of all HTS reels: visu... JBRN1_UKTJ

Technician — Tape Testing & Metrology | Technician | UK office Focus Run the tape test stand day-to-day. Perform incoming inspection on all HTS reels received at the UK office before they are assigned to production. Support the tape insertion ME with data logging and traceability. Key Deliverables Daily operation of tape-star and thickness measurement equipment Incoming inspection of all HTS reels: visual, bag condition, measurements logged to database Reel routing decisions (long-term storage, production line, quarantine) per defined criteria Maintain calibration records and consumables for the test stand Setup and operation of the tape insertion line TPBN1_UKTJ

Technician Tape Testing & Metrology | Technician | UK office Focus Run the tape test stand day-to-day. Perform incoming inspection on all HTS reels received at the UK office before they are assigned to production. Support the tape insertion ME with data logging and traceability. Key Deliverables 2 Technicians Tape Testing & Insertion Daily operation of tape-star and thickness measurement equipment Two full-time positions from the end of September through January Incoming inspection of all HTS reels: visual, bag condition, measurements logged to database Reel routing decisions (long-term storage, production line, quarantine) per defined criteria 2 Technicians Tape Testing & Insertion hands-on roles operating test and measurement equipment, setup of the production line, performing incoming inspection, logging data, and maintaining material traceability. Experience in manufacturing, metrology, inspection, quality, or lab environments would be a good fit. Maintain calibration records and consumables for the test stand Setup and operation of the tape insertion line TPBN1_UKTJ

CNC Polishing Technician (CNC Polishing Setter & Operator) Blaby. Leicestershire Salary - £28,000 - £35,000 plus annual bonus and shift allowance for late shift (every other week) Hours alternate weeks 37.5 hours: 6.00am 2.00pm Mon Thus, 6.00am 1.00pm Friday 2.00pm 10.00pm Mon Thurs, 1.00pm 8.00pm Friday About the Role Our client is seeking an experienced CNC Polishing Technician to join their Fabrication Team, manufacturing high-precision components to exacting customer specifications. In this role, you will set up, operate and monitor CNC polishing equipment used to achieve demanding surface specifications, dimensional accuracy and surface quality requirements. Working to exacting tolerances, you will be responsible for producing high-value components that meet customer, drawing and process requirements. Working with delicate and often fragile materials, you will take ownership of components throughout the polishing process, ensuring the highest standards of quality, cleanliness, workmanship and attention to detail are maintained at all times. Key Responsibilities Set up and operate CNC polishing machines to manufacture precision components. Read and interpret engineering drawings, process documentation and manufacturing instructions. Polish components to specified dimensional, form and surface finish requirements. Select and prepare polishing tools, fixtures, consumables and polishing compounds. Adjust machine parameters to achieve required surface quality and process consistency. Monitor polishing operations and make process adjustments where required. Perform first-off inspections and in-process quality checks to verify compliance with specifications. Conduct visual inspections for scratches, digs, chips, defects and surface contamination. Support metrology and inspection activities using approved measurement equipment. Clean components using approved methods whilst maintaining strict cleanliness standards. Identify and report non-conformances, damage or process abnormalities promptly. Complete production records, route cards, process sheets and inspection documentation accurately. Maintain full product traceability throughout the manufacturing process. Follow Standard Operating Procedures (SOPs), work instructions and approved manufacturing processes. Understand and support Total Productive Maintenance (TPM) activities to ensure equipment reliability. Assist with machine maintenance, housekeeping and equipment care activities. Maintain a clean, organised and controlled working environment. Handle delicate, high-value materials safely and carefully throughout manufacture and inspection. Work collaboratively with colleagues while also being capable of working independently. Prioritise workload effectively to meet production schedules and customer delivery requirements. Support continuous improvement initiatives focused on safety, quality, efficiency and repeatability. Report equipment issues, tooling concerns, quality problems and process deviations promptly. Comply with all company Health & Safety, Quality and Environmental procedures. TPBN1_UKTJ

This an excellent opportunity with for a Maintenance Engineer to join an FMCG Manufacturer in Leicestershire. You will be responsible for reactive and preventative maintenance across the site and providing a continuous improvement-based culture. Maintenance Engineer Salary - £49532 per annum Shift pattern - 4 on 4 off days and nights Location - Leicestershire Responsibilities: Efficiently repair various production machinery using both reactive and preventative maintenance techniques, including motors, control panels and various systems Confidence with PLC fault finding Demonstrate proficiency in both electrical and mechanical principles. Ensure compliance with health and safety regulations. Collaborate with the production team to optimise equipment performance and minimise downtime. Keep detailed records of maintenance activities and provide reports as needed. Requirements: Previous experience in the manufacturing sector. Relevant qualifications in electrical/Mechanical engineering (BTEC, HNC, etc.). Experience in a similar role, such as (shift engineer, multi skilled engineer, engineering technician, shift technician, electrical maintenance engineer, mechanical maintenance engineer) Strong problem-solving skills and the ability to work under pressure. If this could be of interest, please apply or reach out to for more information. TPBN1_UKTJ

Manufacturing Technician / Production Engineer (Fixed Term Contract) Location: Leicester Contract: Fixed Term Contract (Approx. 4 Months) Start Date: Immediate Start Available Overview An exciting opportunity has arisen for an experienced Manufacturing Technician / Production Engineer to support the production and development of advanced superconducting materials within a highly innovative engineering environment. Working as part of a specialist team, you will be involved in the manufacture of high-precision superconducting tape products, supporting both production activities and ongoing research and development projects during an important growth phase of the business. Key Responsibilities Loading, threading and setting up production machinery. Carrying out machine preparation activities before and after production runs. Performing quality assurance checks, machine loading and process set-up activities. Running and monitoring production lines during an early-stage manufacturing development programme. Handling delicate and high-value superconducting materials with precision and care. Supporting tape insertion and processing operations involving long-length products of up to 150 metres. Ensuring correct machine settings and process parameters are achieved to meet stringent quality standards relating to tape thickness and electrical performance. Assisting with troubleshooting, fault finding and technical problem solving across manufacturing processes. Contributing to continuous improvement initiatives and process development activities. Supporting the build, commissioning and optimisation of new production lines. Working closely with engineering and R&D teams to develop and improve manufacturing techniques. Candidate Requirements Previous experience within a manufacturing, production engineering or process engineering environment. Strong mechanical aptitude and experience setting up and operating technical production equipment. Ability to diagnose and resolve manufacturing challenges in a fast-paced environment. Experience working with precision-engineered or delicate products would be highly advantageous. Comfortable working within an R&D-led manufacturing setting where processes are continually evolving. Experience with automated production machinery such as weaving machines, looms or similar equipment would be beneficial. A proactive approach to continuous improvement and process optimisation. What's on Offer Opportunity to work on cutting-edge technology within an advanced manufacturing environment. Exposure to innovative superconducting material production processes. Immediate start available. Fixed-term contract running until approximately the end of January. Opportunity to contribute to a highly skilled technical team during a significant development phase. TPBN1_UKTJ

Toolroom Machinist Leicestershire Immediate Start Permanent Opportunity Have you got any experience of working with Tooling used within the moulding industry (injection, extrusion etc) and looking for your next work opportunity……..Read On I have been instructed by a well established company in Leicestershire to find a Tooling Technician for their business as part of a period of growth and development, this is not a normal tooling role and offers people autonomy and variety of position, which makes this an excellent opportunity, this role is a very important position and is the conduit between the toolroom and manufacturing to enable production and productivity stays at the required levels whilst the toolroom works on developing new tooling solutions The Role Repairing and maintain tooling, working to the tooling schedule in regard to repairing and maintaining tooling usage Strip, clean and inspect tooling and mould components Identify defective components and recommend corrective action Manufacture replacement parts in the toolroom Work with the production and toolroom team to plan and prioritise work Maintain accurate tool maintenance logs and service history About You Experience of working with mechanical or mould tooling Excellent and accurate Mechanical fitting to tight tolerances Manual or CNC Machining Skills (Mill, Turn, Grinding) A Quality mindset with strong attention to detail Able to work autonomously with good problem solving skills Quality first approach is essential If this exciting role sounds like the opportunity for you or you would like to hear more, please click apply or email Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

Maintenance Engineer Salary - £53425 Shift Pattern - Days and Nights, 12 Hours Location - Leicester We are seeking a Maintenance Engineer to join a well-renowned FMCG manufacturer in Leicester. You'll be responsible for ensuring minimal downtime across all production equipment, responding swiftly to breakdowns and carrying out planned maintenance tasks. This will be a 6 week rotating pattern of days and nights. Key Responsibilities: Reactive maintenance and breakdown response on machinery Conduct planned preventative maintenance (PPM) Fault finding on mechanical and electrical systems Work closely with production teams to ensure smooth operation Maintain accurate maintenance recordsRequirements: Engineer with relevant qualifications (NVQ Level 3, HNC/HND, or equivalent) Experience in a similar role such as (multi skilled engineer, shift engineer, shift technician, engineering technician or electrical maintenance engineer) Strong experience in an FMCG, food, or similar fast-paced manufacturing environment Confident with mechanical and electrical fault finding Ability to work independently.What's on Offer: Competitive salary Career development opportunities Pension scheme, healthcare, and other company benefitsShould this position be of interest, please apply or reach out (url removed)

Toolroom Machinist Leicestershire Immediate Start Permanent Opportunity Have you got any experience of working with Tooling used within the moulding industry (injection, extrusion etc) and looking for your next work opportunity……..Read On I have been instructed by a well established company in Leicestershire to find a Tooling Technician for their business as part of a period of growth and development, this is not a normal tooling role and offers people autonomy and variety of position, which makes this an excellent opportunity, this role is a very important position and is the conduit between the toolroom and manufacturing to enable production and productivity stays at the required levels whilst the toolroom works on developing new tooling solutions The Role Repairing and maintain tooling, working to the tooling schedule in regard to repairing and maintaining tooling usage Strip, clean and inspect tooling and mould components Identify defective components and recommend corrective action Manufacture replacement parts in the toolroom Work with the production and toolroom team to plan and prioritise work Maintain accurate tool maintenance logs and service history About You Experience of working with mechanical or mould tooling Excellent and accurate Mechanical fitting to tight tolerances Manual or CNC Machining Skills (Mill, Turn, Grinding) A Quality mindset with strong attention to detail Able to work autonomously with good problem solving skills Quality first approach is essential If this exciting role sounds like the opportunity for you or you would like to hear more, please click apply or email (url removed) Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Our Leicester cient is looking for 2 Technicians - Tape Testing & Metrology, to join them on a 6 month contract, due to an uplift in work. The roles do have the opportunity to go permanent following the initial timescales needed. Job Type: Full-time Department: Manufacturing / Engineering About the Role We are looking for a Technician - Tape Testing & Metrology to join our UK team and play a key role in the day-to-day testing, inspection and traceability of HTS tape materials. This is a hands-on technical role, responsible for operating tape testing and measurement equipment, carrying out incoming inspection of HTS reels, maintaining accurate test and traceability records, and supporting the Tape Insertion Manufacturing Engineer with production activities. The successful candidate will have a practical, methodical approach, strong attention to detail, and a commitment to quality and accurate data. Key Responsibilities Tape Testing & Metrology · Operate the tape test stand and associated tape-star and thickness measurement equipment on a daily basis. · Set up and carry out testing and measurement activities in accordance with approved procedures. · Accurately record, review and maintain test and measurement data. · Identify and escalate abnormal or out-of-specification results. · Maintain a clean, organised and controlled testing environment. Incoming Inspection · Carry out incoming inspection of all HTS reels received at the UK office before they are released to production. · Check reel identification, packaging, bag condition and visual condition. · Perform defined measurements and inspections and accurately record results in the relevant database. · Maintain full material and reel traceability. · Identify damaged, non-conforming or suspect material and ensure it is appropriately held or quarantined. Reel Routing & Material Control · Make reel routing decisions in line with defined acceptance criteria, including: o Long-term storage o Production o Quarantine / hold · Maintain accurate records of reel status and location. · Escalate quality or material issues to the appropriate engineering or quality team. Equipment & Calibration · Maintain calibration records for test and measurement equipment. · Monitor calibration status and ensure equipment remains within its required calibration period. · Maintain test stand consumables and identify replenishment requirements. · Carry out routine equipment checks and basic troubleshooting. · Report equipment faults and support corrective actions as required. Tape Insertion Support · Set up and operate the tape insertion line in accordance with approved procedures. · Support the Tape Insertion Manufacturing Engineer with data logging and production traceability. · Accurately record process and production information. · Support engineering trials, investigations and continuous improvement activities. About You We are looking for someone who is hands-on, technically minded and highly detail-oriented. You will be comfortable working witequipment and following defined procedures while also being able to recognise when something does not look right. You will ideally have: · Previous experience in a measurement technician, manufacturing, inspection, testing or metrology environment. · Experience using measurement or test equipment. · Good attention to detail and a methodical approach to work. · The ability to accurately record and manage technical data. · An understanding of quality, inspection and traceability requirements. · Good practical problem-solving skills. · The ability to follow written procedures and work instructions. · Good computer skills and confidence working with databases or production records. · The ability to work effectively both independently and as part of a wider engineering/manufacturing team. Experience within HTS, superconducting materials, advanced manufacturing, tape processing, metrology or a similar technical environment would be advantageous, but is not essential. What We Offer This is an excellent opportunity for a practical and technically capable Technician to develop their experience within a specialist engineering and manufacturing environment. You will have the opportunity to work closely with engineering and production teams and gain hands-on experience across testing, metrology, material inspection, traceability and tape insertion processes. If you are organised, quality-focused and enjoy working with technical equipment and data, we would like to hear from you. Apply now to join our UK team as a Technician - Tape Testing & Metrology, by sending your CV to (url removed) Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Engineering Technician (mech and elec) Manufacturing Leicester £46,500 per annum Your New Employer This is a great opportunity to join a fast-paced manufacturing facility running high-speed, automated production lines. The business places a strong emphasis on safety, reliability and continuous improvement, and offers a genuinely supportive engineering culture where new ideas and challenge are welcomed. Your New Job Reporting to the Engineering Supervisor, you'll work a 4 on 4 off shift pattern covering both days and nights, taking ownership of mechanical maintenance and engineering activity across the site, including high-speed production lines, converting equipment and site utilities. Day to day you'll carry out fault diagnosis and repairs on mechanical systems, pumps, gearboxes, conveyors and drive systems, execute planned preventative maintenance to reduce breakdowns, and respond to and root-cause equipment failures. You'll ensure all mechanical work meets legal, regulatory and site safety standards, including LOTO procedures, and keep drawings, documentation and equipment records up to date. You'll also provide hands-on technical support to production teams during your shift and get involved in continuous improvement initiatives, equipment upgrades, and new machinery installations alongside the Engineering Supervisor. Your Experience and Requirements ZAP are searching for candidates with an NVQ Level 3 / City & Guilds Level 3 in Mechanical Engineering, Maintenance, or equivalent (or a time-served mechanical engineering apprenticeship). You'll need solid experience of mechanical maintenance and fault-finding within a manufacturing or industrial environment, ideally on high-speed automated machinery, plus a track record delivering PPM and working within strict safety and compliance frameworks. An HNC/HND in Mechanical Engineering would be an advantage. Your Future as a Successful Candidate This role offers real scope to develop into more senior engineering positions, with exposure to equipment upgrade projects and continuous improvement work that will broaden your technical skillset. For the right candidate looking to build a long-term career in a business that genuinely invests in its engineering team, this is a strong next step

Job Purpose As a Single Point Diamond Turning Technician within the Fabrication Team, you will be responsible for the manufacture of precision infrared and visible optical components to exacting customer specifications. You will set, operate and optimise ultra precision diamond turning machinery to produce optical surfaces with high dimensional accuracy and exceptional surface finish requirements. The role involves machining a variety of optical materials while maintaining micron and sub micron tolerances, carrying out dimensional and surface quality inspections, and ensuring all components conform to drawing, process and customer requirements. You will be expected to take ownership of your work from machine setup and process preparation through to final inspection, maintaining the highest standards of quality, cleanliness, workmanship and traceability throughout the manufacturing process. Key Responsibilities Set, operate and optimise Single Point Diamond Turning machines to manufacture precision optical components. Interpret engineering drawings, specifications and manufacturing documentation accurately. Manufacture components to micron and sub micron dimensional tolerances and optical surface quality requirements. Select and install appropriate tooling, fixtures and machine parameters for production activities. Verify machine set up, tooling condition and process parameters prior to manufacture. Produce first off components and conduct in process inspections to ensure process conformity. Monitor machine performance and make appropriate process adjustments to maintain quality and repeatability. Inspect finished components using precision metrology and measurement equipment. Carry out optical surface inspections in accordance with applicable standards and customer requirements. Identify defects, contamination, handling damage, scratches, chips or other non conformances and escalate where required. Clean components using approved methods while maintaining strict optical cleanliness standards. Complete process sheets, inspection records and production documentation accurately. Maintain full product traceability throughout the manufacturing process. Follow Standard Operating Procedures (SOPs), work instructions and approved manufacturing processes. Understand and comply with TPM requirements and contribute to maintaining equipment in optimum condition. Maintain a clean, organised and controlled working environment appropriate for precision optical manufacturing. Handle delicate and high-value optical materials and components with care at all stages of manufacture and inspection. Work effectively both independently and as part of a wider fabrication team. Manage workload and priorities effectively to meet production schedules and delivery requirements. Identify opportunities to improve manufacturing efficiency, quality, yield and repeatability. Support Continuous Improvement and Lean Manufacturing activities. Report equipment issues, tooling concerns, quality problems and process abnormalities promptly. Comply with all company health & safety, quality and environmental procedures. *The responsibilities listed above are not intended to be an exhaustive list of all tasks to be performed. Additional duties are likely to be required as directed by the Department Manager. Working Environment The role is based within a precision optical fabrication environment where components may be small, delicate and high value. The successful candidate must be comfortable working in a controlled manufacturing environment and maintaining consistently high standards of cleanliness and housekeeping. Due to the nature of the products, careful handling, attention to detail and adherence to documented processes are essential. Key Relationships You are to work closely with the department, passing on the necessary skills and providing assistance. You will have close contact with your supervisor, expressing any concerns or issues that may arise. Work with other employees within your department, showing respect, professionalism and consideration. Physical Demands Fabrication optical technicians have a responsibility to assist in the general running of the area; this may involve physical activities such as transporting optics and tooling between departments within the fabrication facility. Frequent lifting of weights in excess of 5kg may be required. To perform this job successfully an individual must be able to carry out each duty satisfactorily. Reasonable adjustments may be made to enable individuals with disabilities to perform essential functions. These guidelines are provided to assist you in the performance of your role. Essential Skills & Experience Proven experience setting and operating Single Point Diamond Turning or CNC Lathe machinery. Experience manufacturing precision components to micron and sub micron tolerances. Experience producing and achieving demanding surface finish requirements. Ability to read and accurately interpret engineering drawings and specifications. Experience using precision metrology and inspection equipment. Good understanding of ultra precision machining principles and process control. Experience working with controlled manufacturing documentation, SOPs and process sheets. Understanding of TPM principles and preventative maintenance requirements. High level of manual dexterity and hand eye coordination. Excellent attention to detail. Ability to work consistently with small, delicate and high value optical components. Strong organisational and time management skills. Ability to work independently and take ownership of work quality. Strong commitment to quality, accuracy and right first time manufacturing. Good understanding of health and safety within a manufacturing environment. Desirable Skills & Experience Experience machining infrared optical materials including germanium, silicon and Multi spectral zinc sulphide. Experience within optical manufacturing or ultra precision engineering environments. Experience with freeform or aspheric optical component manufacture. Experience using interferometers, profilometers or advanced optical metrology equipment. Experience working to ISO and DIN optical standards. CNC programming experience related to ultra-precision machining equipment. Understanding of optical form accuracy and surface roughness requirements. Experience supporting process development and manufacturing improvements. Knowledge of SPC, process capability and statistical quality techniques. Experience contributing to Lean Manufacturing and Continuous Improvement initiatives. Personal Attributes Precision: Maintains exceptional accuracy while manufacturing and inspecting optical components. Attention to Detail: Able to identify extremely small defects, dimensional variations and surface imperfections. Dexterity: Confident handling small, delicate and high value optical components. Accountability: Takes ownership of the quality and accuracy of their work. Reliability: Consistently follows procedures and meets production requirements. Problem Solving: Able to investigate process, tooling and quality issues and identify practical solutions. Teamwork: Works effectively with colleagues across fabrication, quality, engineering and production. Initiative: Works independently and recognises when additional support is required. Discipline: Comfortable working within controlled processes, SOPs and documented procedures. Continuous Improvement: Actively contributes ideas to improve quality, efficiency and repeatability

CNC Polishing Technician (CNC Polishing Setter & Operator) Blaby, Leicestershire Salary - £28,000 - £35,000 plus annual bonus and shift allowance for late shift (every other week) Hours – alternate weeks 37.5 hours: 6.00am – 2.00pm Mon – Thus, 6.00am – 1.00pm Friday 2.00pm – 10.00pm Mon – Thurs, 1.00pm – 8.00pm Friday About the Role Our client is seeking an experienced CNC Polishing Technician to join their Fabrication Team, manufacturing high-precision components to exacting customer specifications. In this role, you will set up, operate and monitor CNC polishing equipment used to achieve demanding surface specifications, dimensional accuracy and surface quality requirements. Working to exacting tolerances, you will be responsible for producing high-value components that meet customer, drawing and process requirements. Working with delicate and often fragile materials, you will take ownership of components throughout the polishing process, ensuring the highest standards of quality, cleanliness, workmanship and attention to detail are maintained at all times. Key Responsibilities • Set up and operate CNC polishing machines to manufacture precision components., • Read and interpret engineering drawings, process documentation and manufacturing instructions., • Polish components to specified dimensional, form and surface finish requirements., • Select and prepare polishing tools, fixtures, consumables and polishing compounds., • Adjust machine parameters to achieve required surface quality and process consistency., • Monitor polishing operations and make process adjustments where required., • Perform first-off inspections and in-process quality checks to verify compliance with specifications., • Conduct visual inspections for scratches, digs, chips, defects and surface contamination., • Support metrology and inspection activities using approved measurement equipment., • Clean components using approved methods whilst maintaining strict cleanliness standards., • Identify and report non-conformances, damage or process abnormalities promptly., • Complete production records, route cards, process sheets and inspection documentation accurately., • Maintain full product traceability throughout the manufacturing process., • Follow Standard Operating Procedures (SOPs), work instructions and approved manufacturing processes., • Understand and support Total Productive Maintenance (TPM) activities to ensure equipment reliability., • Assist with machine maintenance, housekeeping and equipment care activities., • Maintain a clean, organised and controlled working environment., • Handle delicate, high-value materials safely and carefully throughout manufacture and inspection., • Work collaboratively with colleagues while also being capable of working independently., • Prioritise workload effectively to meet production schedules and customer delivery requirements., • Support continuous improvement initiatives focused on safety, quality, efficiency and repeatability., • Report equipment issues, tooling concerns, quality problems and process deviations promptly., • Comply with all company Health & Safety, Quality and Environmental procedures

Senior Revit Technician Leicester Up to £50k DOE We have an opportunity for a Senior Structural Revit Technician to join a thriving company in Leicester. Their buildings structures team is looking for a talented and experienced individual to join them as a Senior Structural Revit Technician. You will help to lead and mentor a young and dynamic team on exciting and challenging projects, where you will play an integral part in each scheme from concept to completion, including the production of 3D models. Essential Requirements: - Hold a minimum of an ONC in Civil Engineering or relevant engineering course - 5+ years Revit experience within the UK structures environment - Experience of modelling existing masonry structures and new RC Concrete/steel framed buildings • Able to use and create project templates and filters to in-house standards - Able to produce 3D BIM models to a Level 2 Standard. All to in-house BIM specifications - Develop the structural model by close coordination with all the project design disciplines - Used to multi-disciplinary collaborative working - Good engineering knowledge and understanding of key structural engineering principals This is a fantastic opportunity for a passionate and enthusiastic individual to join a well-respected Engineering consultancy located in Leicester. A competitive salary is on offer, alongside an excellent opportunity for you to learn and progress your career. If you are interested in applying for this role, please send an updated CV to Graham Ventham at Conrad Consulting

I am recruiting on behalf of a well-established and thriving manufacturer of specialist products who supply to a wide variety of industries globally. They are currently seeking a Coating Technician to join their production team, working Mon-Fri 6-2 and 2-10 shifts, for which a generous shift allowance is paid. Duties will include: Running various process and operating machines to apply specialist coating to products Examine the product before coating to ensure it is of correct standard Ensure accurate quantities and consistencies are applied Identify any problems in the coating process and take appropriate action Carry out routine maintenance of equipment to ensure efficiency Perform cleaning operations and identify any issues that could arise Requirements Experience in a process driven manufacturing environment, ideally with use of raw materials Good attention to detail Ability to follow instructions and identify problems GCSE or above in Maths and a science subject The role offers the opportunity to join a professional company with good working conditions and generous benefits. Premier Placement Services are acting as an employment agency for this vacancy

Manufacturing Technician / Production Engineer (Fixed Term Contract) Location: Leicester Contract: Fixed Term Contract (Approx. 4 Months) Start Date: Immediate Start Available Overview An exciting opportunity has arisen for an experienced Manufacturing Technician / Production Engineer to support the production and development of advanced superconducting materials within a highly innovative engineering environment. Working as part of a specialist team, you will be involved in the manufacture of high-precision superconducting tape products, supporting both production activities and ongoing research and development projects during an important growth phase of the business. Key Responsibilities Loading, threading and setting up production machinery. Carrying out machine preparation activities before and after production runs. Performing quality assurance checks, machine loading and process set-up activities. Running and monitoring production lines during an early-stage manufacturing development programme. Handling delicate and high-value superconducting materials with precision and care. Supporting tape insertion and processing operations involving long-length products of up to 150 metres. Ensuring correct machine settings and process parameters are achieved to meet stringent quality standards relating to tape thickness and electrical performance. Assisting with troubleshooting, fault finding and technical problem solving across manufacturing processes. Contributing to continuous improvement initiatives and process development activities. Supporting the build, commissioning and optimisation of new production lines. Working closely with engineering and R&D teams to develop and improve manufacturing techniques.Candidate Requirements Previous experience within a manufacturing, production engineering or process engineering environment. Strong mechanical aptitude and experience setting up and operating technical production equipment. Ability to diagnose and resolve manufacturing challenges in a fast-paced environment. Experience working with precision-engineered or delicate products would be highly advantageous. Comfortable working within an R&D-led manufacturing setting where processes are continually evolving. Experience with automated production machinery such as weaving machines, looms or similar equipment would be beneficial. A proactive approach to continuous improvement and process optimisation.What's on Offer Opportunity to work on cutting-edge technology within an advanced manufacturing environment. Exposure to innovative superconducting material production processes. Immediate start available. Fixed-term contract running until approximately the end of January. Opportunity to contribute to a highly skilled technical team during a significant development phase

About the Role We are seeking an experienced CNC Polishing Technician to join our Fabrication Team, manufacturing high-precision infrared and visible optical components to exacting customer specifications. In this role, you will set up, operate and monitor CNC polishing equipment used to achieve demanding optical surface specifications, dimensional accuracy and surface quality requirements. Working to exacting tolerances, you will be responsible for producing high-value optical components that meet customer, drawing and process requirements. Working with delicate and often fragile optical materials, you will take ownership of components throughout the polishing process, ensuring the highest standards of quality, cleanliness, workmanship and attention to detail are maintained at all times. Key Responsibilities Set up and operate CNC polishing machines to manufacture precision optical components. Read and interpret engineering drawings, process documentation and manufacturing instructions. Polish optical components to specified dimensional, form and surface finish requirements. Select and prepare polishing tools, fixtures, consumables and polishing compounds. Adjust machine parameters to achieve required optical surface quality and process consistency. Monitor polishing operations and make process adjustments where required. Perform first-off inspections and in-process quality checks to verify compliance with specifications. Conduct visual inspections for scratches, digs, chips, defects and surface contamination. Support optical metrology and inspection activities using approved measurement equipment. Clean components using approved methods whilst maintaining strict cleanliness standards. Identify and report non-conformances, damage or process abnormalities promptly. Complete production records, route cards, process sheets and inspection documentation accurately. Maintain full product traceability throughout the manufacturing process. Follow Standard Operating Procedures (SOPs), work instructions and approved manufacturing processes. Understand and support Total Productive Maintenance (TPM) activities to ensure equipment reliability. Assist with machine maintenance, housekeeping and equipment care activities. Maintain a clean, organised and controlled working environment. Handle delicate, high-value optical materials safely and carefully throughout manufacture and inspection. Work collaboratively with colleagues while also being capable of working independently. Prioritise workload effectively to meet production schedules and customer delivery requirements. Support continuous improvement initiatives focused on safety, quality, efficiency and repeatability. Report equipment issues, tooling concerns, quality problems and process deviations promptly. Comply with all company Health & Safety, Quality and Environmental procedures. *The responsibilities listed above are not intended to be an exhaustive list of all tasks to be performed. Additional duties are likely to be required as directed by the Department Manager. Working Environment The role is based within a precision optical fabrication environment where components may be small, delicate and high value. The successful candidate must be comfortable working in a controlled manufacturing environment and maintaining consistently high standards of cleanliness and housekeeping. Due to the nature of the products, careful handling, attention to detail and adherence to documented processes are essential. Key Relationships Work closely with colleagues within the Fabrication Department to share knowledge and provide support. Maintain regular communication with your Supervisor, raising concerns or issues promptly. Build positive working relationships across the business through a professional and collaborative approach. Physical Demands The role involves supporting the day-to-day operation of the fabrication area, including moving materials and optical components between departments. Regular lifting of items in excess of 5kg may be required. Reasonable adjustments may be made to enable individuals with disabilities to perform the essential functions of the role. Essential Skills & Experience Proven experience operating CNC polishing equipment or precision polishing machinery. Experience manufacturing precision components to tight dimensional tolerances. Understanding of polishing processes, tooling and consumables. Ability to read and accurately interpret engineering drawings and technical specifications. Experience using precision measurement and inspection equipment. Strong attention to detail and commitment to quality standards. Experience carrying out visual inspections and identifying surface defects. High level of manual dexterity and hand-eye coordination. Ability to work accurately with small and delicate components. Experience working with SOPs, process sheets and controlled manufacturing documentation. Understanding of Total Productive Maintenance (TPM) principles. Strong organisational and time-management skills. Ability to work independently and use initiative. Strong team-working skills. Commitment to right-first-time manufacturing and continuous improvement. Good understanding of Health & Safety requirements within a manufacturing environment. Desirable Skills & Experience Previous experience within precision optics manufacturing or a similar high-precision fabrication environment. Experience polishing infrared optical materials or other brittle and specialist materials. Experience working to micron-level dimensional and surface quality requirements. Knowledge of optical form, flatness, surface figure and surface finish requirements. Experience using interferometers, profilometers or other optical metrology equipment. Understanding of optical surface quality standards including scratch-dig specifications. Knowledge of ISO and DIN standards relating to optical components and surface quality. Experience supporting Lean Manufacturing or continuous improvement activities. Understanding of Statistical Process Control (SPC), process capability and quality control techniques. Experience working within controlled cleanliness or cleanroom environments. Personal Attributes Precision: Maintains exceptional accuracy while manufacturing and inspecting optical components. Attention to Detail: Able to identify extremely small defects, dimensional variations and surface imperfections. Dexterity: Confident handling small, delicate and high value optical components. Accountability: Takes ownership of the quality and accuracy of their work. Reliability: Consistently follows procedures and meets production requirements. Problem Solving: Able to investigate process, tooling and quality issues and identify practical solutions. Teamwork: Works effectively with colleagues across fabrication, quality, engineering and production. Initiative: Works independently and recognises when additional support is required. Discipline: Comfortable working within controlled processes, SOPs and documented procedures. Continuous Improvement: Actively contributes ideas to improve quality, efficiency and repeatability

Join Our Team at Leicestershire Fire and Rescue Service! Are you a finance professional looking for the next step in your career? Leicestershire Fire and Rescue Service is seeking a talented individual who is ready to progress their finance career in a dynamic and community-focused organisation. Leicestershire Fire & Rescue Service (LFRS) provides a wide range of services covering more than 979 square miles, including both urban and rural communities with a population of approximately 1.1 million. With 20 strategically placed fire stations, our purpose is Safer People, Safer Places in both our communities and our workplaces. Benefits you will receive: Competitive salary Flexible working Generous leave entitlement plus public holidays Full support for ongoing professional development On-site gym facilities Free onsite parking Access to an emergency services “Blue Light” discount card Use of our in-house occupational health unit, which includes fitness support Access to the Service’s 24/7 Employee Assistance Programme Public sector pension (subject to pension scheme rules). You will automatically be enrolled into the Local Government Pension Scheme (LGPS), which is a tax-approved, defined-benefit occupational pension scheme. Your contributions are based on your earnings, and you can choose from different income options when you retire. Leicestershire Fire and Rescue Service is committed to promoting equality, diversity and inclusion in the workplace. Furthermore, we want to create a work environment where everyone feels safe, can be themselves and can perform their roles to the best of their abilities. We have signed up with a number of nationally recognised organisations that promote equality, diversity and inclusion and we are working with them to help us achieve our objectives. These organisations include: Employers Network for Equality and Inclusion Department of Works and Pension’s Disability Confident scheme Asian Fire Service Association (AFSA) Safer Recruitment We are committed to safeguarding and promoting the welfare of children, young people, and vulnerable adults. Safer recruitment practices, including identity, reference, and appropriate criminal record checks, will be applied throughout the recruitment process. Pension Considerations Please note that it is your personal responsibility to check whether by applying/accepting this position it would result in any Annual Allowance or Lifetime Allowance implications. A breach in the Annual Allowance threshold could result in a Tax charge. A breach in the Lifetime Allowance threshold will result in a Tax charge. Further information on Annual Allowance and Lifetime Allowance can be obtained from our Pensions team. Sponsorship Please take note that Leicestershire Fire and Rescue Service does not hold a UK Visa & Immigration (UKVI) Skilled Worker License sponsor and are unable to sponsor any individuals for Skilled Worker Sponsorship. Hybrid working may be considered for this role. Closing date: 23:59 7 October 2026 Interview and test date: from 16 October 2026 If you are invited to interview, you will be assessed against the NFCC Leadership Framework. The highest level relevant to the role is outlined in the person specification for the position you are applying for. The interview may include both behavioural and role-specific questions to assess your suitability. You will also be asked a question exploring your understanding of, and commitment to, Equality, Diversity, and Inclusion (EDI) in the workplace. Job Objectives Reporting to the Revenue Accountant, your role as Accounting Technician would be to lead on some areas of financial reporting and support on others, support with finance systems maintenance and capital budgeting monitoring. It is a varied role with lots of scope to develop both yourself and the role. With strong finance and system skills, your key responsibilities will include: Complete reconciliations, examples including but not limited to payroll, VAT, balance sheet and bank. Support with completing the year end accounts and audit. Develop knowledge of the finance system and support with ongoing maintenance. Support with capital budgeting and report production. Skills Required You should hold an AAT or equivalent qualification, with experience in a finance department ideally in a local government finance setting. You will be a confident communicator who is able to foster great working relationships with a flexible approach and the ability to adapt to changing priorities

Civil Technician Location: Leicester Salary: £28,000 - £35,000 Looking to strengthen your technical capability within a growing civil engineering team? This Civil Technician opportunity in Leicester offers structured development and exposure across infrastructure and drainage projects. A well-established consultancy is expanding its civils function and seeking a Civil Technician to support residential and commercial development schemes. As a Civil Technician, you will contribute to drainage and highway design, working closely with engineers and the wider design team to deliver technical packages from planning through to approval. The Civil Technician will assist with modelling, drawing production and submission preparation, playing a key role in project delivery. This Civil Technician role suits someone with at least two years' UK consultancy experience who is confident using drainage software and working collaboratively within a design environment. Key responsibilities Produce drainage and infrastructure drawings Support S38, S278 and S104 technical submissions Model drainage networks using WinDes or similar software Assist with ground modelling and highway layouts * Coordinate with engineers and external stakeholders Candidate requirements Minimum two years' UK consultancy experience Strong knowledge of drainage and infrastructure design Proficient in XP Solutions WinDes Experience with Civil 3D preferred * Confident working within a multi-disciplinary team Why apply This Civil Technician role offers technical progression and exposure to varied development schemes. The salary for this Civil Technician position is £28,000 - £35,000, reflecting experience and capability within a supportive and growing consultancy environment. Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience

Mechanical Fitter Are you a Mechanical Fitter looking for your next opportunity? Do you have experience assembling mechanical assemblies for CNC machine tools, including pneumatics, hydraulics, or pressure-based fluid systems? If so, this could be the perfect role for you. Our client, a leading engineering and manufacturing business, is seeking a Mechanical Fitter to join their team in Leicestershire. The successful candidate will have a strong mechanical assembly background, the ability to read engineering drawings, and experience building precision machinery to a high standard. Mechanical Fitter Permanent Position Salary: £30,000–£42,000 (DOE) Monday to Friday Leicestershire Mechanical Fitter Job Description • Assemble mechanical assemblies and sub-assemblies for CNC machine tools to engineering specifications • Install and assemble pneumatic, hydraulic, and pressure-based fluid systems • Read and interpret engineering drawings, assembly instructions, and technical documentation • Carry out mechanical testing, fault finding, and adjustments to ensure equipment meets quality standards • Work closely with the engineering and production teams to ensure projects are completed on time • Maintain a safe and organised working environment while following company health and safety procedures Mechanical Fitter Essential Experience / Skills / Qualifications • Previous experience as a Mechanical Fitter, Machine Builder, or Mechanical Assembly Technician • Experience assembling mechanical assemblies for CNC machine tools or similar precision machinery • Knowledge of pneumatics, hydraulics, and pressure-based fluid systems • Ability to read and interpret engineering drawings and technical documentation • Strong mechanical fault-finding and problem-solving skills • High attention to detail with a commitment to producing quality work • Ability to work independently and as part of a team If you, or anyone you know are interested in the role, click apply or send your CV to (url removed)

The Role We are currently recruiting for an experienced Tool Room Technician to join an established manufacturing business. The successful candidate will be responsible for the maintenance, servicing and repair of plastic injection mould tooling, ensuring tools are maintained to a high standard and are ready for production when required. This is a hands-on role involving planned preventative maintenance, fault finding, cleaning, inspection and component replacement, working closely with Production and Toolroom teams to ensure tooling remains reliable and production downtime is minimised. The role would suit someone with a background in injection mould tooling, toolmaking, mechanical fitting or a similar manufacturing environment who enjoys practical, hands-on work. Key Responsibilities Carry out planned preventative maintenance on plastic injection mould tools. Strip down, clean, inspect and service moulds and associated components. Identify worn, damaged or defective tooling components and recommend appropriate action. Complete routine tooling repairs and replace components where required. Maintain mould bases, bolsters and associated tooling equipment. Prepare tooling and spare components for production requirements. Ensure moulds are cleaned, serviced and fully operational before being returned to production. Respond to tooling issues and support reactive maintenance when required. Diagnose recurring tooling issues and highlight potential improvements. Maintain accurate records of maintenance, repairs, faults and component replacements. Assist with developing and maintaining planned maintenance schedules based on tooling usage. Work closely with Production and Toolroom teams to prioritise maintenance requirements. Ensure tooling and maintenance equipment are kept clean, organised and in good condition. Follow company procedures, quality requirements and health & safety standards at all times. * Undertake any other reasonable duties in support of the manufacturing operation. The Candidate Previous experience working with injection mould tools or similar mechanical tooling. Strong mechanical fitting and assembly skills. Previous experience within a plastic injection moulding would be desirable The ability to confidently strip, inspect and rebuild tooling. Good understanding of mould construction and associated components. Experience identifying wear, damage and potential tooling faults. Ability to use a range of standard workshop tools and equipment. Basic machining experience. The Package Up to £35,000 Opportunity to work within an established manufacturing environment Hands-on role with a varied workload Ongoing training and development opportunities Long-term career opportunity

Assembly Technician - Up to £35,000 Location: Leicestershire Hours: Monday-Friday, 06:00-14:00 Contract: Full-time, Permanent Salary: Up to £35,000 depending on experience We are looking for an experienced Assembly Technician to join a growing engineering and manufacturing business in Leicestershire. The successful Assembly Technician will be involved in a combination of mechanical assembly, pipework fabrication and production activities, helping to manufacture specialist cooling systems. Experience with copper pipework, brazing, refrigeration, HVAC or pressure/leak testing would be advantageous but is not essential. Key Responsibilities Assemble mechanical components and sub-assemblies. Cut, measure, prepare and bend copper tube. Carry out brazing and other basic fabrication work. Install pumps, valves, heat exchangers, compressors and associated components. Work accurately from engineering drawings and Bills of Materials. Use a range of hand and power tools. Carry out quality checks and ensure high standards of workmanship. Support wider production activities when required. About You You should have: Mechanical assembly or manufacturing experience. Experience using hand and power tools. Ability to read and understand engineering drawings. A practical, hands-on approach. A reliable and positive attitude. Ability to work independently and as part of a team.If you would be interested in the Assembly Technician role, please apply below. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity

EXPERIENCED MULTI-SKILLED MET TECHNICIAN Location: Leicester Salary: Up to £55,000 Depending on Experience Job Type: Full-Time, Permanent Hours: Monday - Friday - 08:30 - 17:00 Looking for a role where your MET expertise is recognised, your earning potential is rewarded, and your career can continue to progress? If you're an experienced Multi-Skilled MET Technician with strong mechanical knowledge, including wheel alignment and suspension expertise, this is an excellent opportunity to join a professional accident repair centre where technical ability and quality workmanship are genuinely valued. Offering a competitive salary of up to £55,000 depending on experience, you'll join an experienced team within a modern, well-equipped bodyshop. With a Monday to Friday working pattern and no weekend commitments, you'll benefit from an excellent work-life balance while continuing to develop your technical expertise and work on a varied range of modern vehicles. WHAT'S IN IT FOR YOU? ·Competitive Salary - Up to £55,000 DOE ·Monday to Friday Working Pattern ·08:30am - 5:00pm ·Full-Time, Permanent Position ·No Weekend Working ·Modern Bodyshop Environment ·Ongoing Training & Development ·Career Progression Opportunities ·Supportive and Experienced Team THE ROLE As an Experienced Multi-Skilled MET Technician, you will be responsible for the removal, repair, replacement and refitting of mechanical, electrical and trim components on accident-damaged vehicles. A key part of the role will involve your strong wheel alignment and suspension expertise, ensuring vehicles are correctly assessed, repaired and returned to the road in a safe and roadworthy condition. Working as part of an experienced bodyshop team, you will play a key role in ensuring vehicles are correctly stripped, repaired and rebuilt to manufacturer and industry standards. Key Responsibilities: ·Carry out mechanical, electrical and trim strip and fit work on accident-damaged vehicles ·Complete wheel alignment checks and adjustments using appropriate equipment ·Diagnose, repair and replace suspension components and associated systems ·Remove and refit vehicle components including bumpers, lighting systems, panels, airbags, interior trim and associated components ·Diagnose mechanical and electrical faults associated with accident damage ·Complete accurate vehicle dismantling and rebuilding to support the repair process ·Work closely with Panel Technicians, Paint Technicians, Estimators and Workshop Controllers ·Follow manufacturer repair methods and ensure all work meets required safety and quality standards ABOUT YOU We're looking for an experienced and highly capable Multi-Skilled MET Technician with strong mechanical knowledge and proven expertise in wheel alignment and suspension systems. ·Proven experience as an MET Technician within an automotive accident repair bodyshop ·Strong wheel alignment experience is essential ·Strong suspension diagnostic and repair skills are essential ·Excellent mechanical, electrical and trim repair knowledge ·Experience with vehicle strip and fit, component removal and refitting ·Confident working on modern vehicles and associated electrical systems ·Ability to diagnose faults and identify appropriate repair solutions ·Strong understanding of suspension geometry and vehicle alignment ·Good understanding of manufacturer repair methods and vehicle safety procedures ·IMI and/or ATA qualifications advantageous ·Excellent attention to detail and commitment to quality ·Able to work efficiently within a busy production environment ·Reliable, conscientious and professionally minded ·Strong team player with a positive and proactive approach ·Full UK Driving Licence preferred Alternative Job Titles: Multi-Skilled MET Technician / MET Technician / Mechanical Electrical Trim Technician / Vehicle MET Technician / Automotive MET Technician / Accident Repair Technician / Bodyshop MET Technician / Vehicle Technician / Mechanical Technician / Wheel Alignment Technician / Suspension Technician / Vehicle Strip & Fit Technician APPLY TODAY This is an excellent opportunity for an experienced Multi-Skilled MET Technician to join a professional accident repair business offering a salary of up to £55,000 depending on experience, a Monday to Friday working pattern and genuine long-term career stability. If you're a highly skilled MET Technician with strong wheel alignment, suspension and mechanical expertise, and you're looking for a role where your technical ability and quality workmanship will be recognised and rewarded, we'd love to hear from you. Apply now for immediate consideration. Contact Steve @ AutoSkills UK - Job Reference - 54017

EXPERIENCED MULTI-SKILLED PANEL BEATER Location: Leicester Salary: £45,000 - £50,000 Depending on Experience Job Type: Full-Time, Permanent Hours: Monday - Friday | 8:30am - 5:00pm Looking for a role where your skills are recognised, your earning potential is rewarded, and your career can continue to progress? If you're an experienced Multi-Skilled Panel Beater looking for a role where your technical ability is genuinely valued, this is an excellent opportunity to join a professional accident repair centre. Offering a competitive salary of £45,000 - £50,000 depending on experience, you'll have the opportunity to work within a modern, well-equipped bodyshop alongside a skilled and supportive team. Enjoy a strong work-life balance with a Monday to Friday working pattern and no weekend commitments. If you're ready to move into a role offering excellent earning potential, long-term stability and genuine career progression, this could be the ideal next step for an experienced multi-skilled technician. WHAT'S IN IT FOR YOU? ·Competitive Salary - £45,000 - £50,000 DOE ·Monday to Friday Working Pattern ·Working Hours: 8:30am - 5:00pm ·40-Hour Working Week ·Full-Time, Permanent Position ·Modern Accident Repair Centre ·Professional Workshop Environment ·Ongoing Training & Development ·Career Progression Opportunities THE ROLE As an Experienced Multi-Skilled Panel Beater, you'll be responsible for carrying out high-quality accident repairs, structural and cosmetic panel work, and associated bodyshop repairs. Your ability to work across multiple repair disciplines will make you a key member of the production team, helping ensure vehicles are repaired efficiently and returned to customers to the highest possible standard. Key Responsibilities: ·Carry out accident damage repairs in accordance with manufacturer repair methods and industry standards ·Complete panel beating, panel replacement, straightening, alignment and structural repairs ·Carry out welding and fabrication where required using appropriate repair methods ·Assess damage and identify additional repair requirements during the repair process ·Work closely with MET Technicians, Paint Technicians, Preppers, Estimators and Workshop Controllers ·Ensure all repairs are completed accurately, efficiently and within agreed repair times ·Protect vehicles throughout the repair process and maintain excellent workshop housekeeping ·Follow Health & Safety, COSHH, manufacturer and bodyshop quality procedures at all times ABOUT YOU We're looking for an experienced Multi-Skilled Panel Beater with strong accident repair experience and the ability to produce consistently high-quality workmanship. ·Extensive experience as a Panel Beater within an accident repair or bodyshop environment ·Strong knowledge of modern vehicle body repair techniques ·Confident carrying out panel replacement, repair, alignment, welding and structural repairs ·Ability to work from manufacturer repair methods and industry standards ·Experience working to production times, KPIs and quality standards ·Strong attention to detail and commitment to first-class workmanship ·Able to work independently while contributing effectively to a professional team ·Strong work ethic, reliability and a positive attitude ·IMI and/or ATA qualification is advantageous ·Full UK Driving Licence preferred Alternative Job Titles: Multi-Skilled Panel Beater / Panel Technician / Vehicle Body Repair Technician / Accident Repair Technician / Automotive Panel Beater / Senior Panel Beater / Bodyshop Technician / Vehicle Repair Technician / Multi-Skilled Bodyshop Technician / Car Body Repair Technician APPLY TODAY This is an excellent opportunity to join a growing accident repair business that values its employees, offers strong earning potential, genuine career progression and long-term stability within a modern professional working environment. If you're an experienced Multi-Skilled Panel Beater looking for a role where your technical ability, experience and quality workmanship will be recognised and rewarded, we'd love to hear from you. Apply now for immediate consideration and take the next step in your automotive accident repair career. Contact Steve @ AutoSkills UK - Job Reference - 54462

Revit Technician – Wanted - Immediate Start! Leicester Based | Up to £40K per year (DOE) Permanent, Full-Time Are you an experienced Revit Technician with structural experience looking for your next opportunity? Regional Recruitment are recruiting for a Revit Technician to join an established and growing consultancy based in Leicester. This is an excellent opportunity for a technically minded Revit professional to work on a range of structural projects, producing high-quality models and drawings while working closely with experienced engineers and design teams. What's on Offer: Competitive salary of up to £40,000 depending on experience Excellent development and progression opportunities Opportunity to work on a varied range of structural projects Supportive and collaborative working environment Long-term career development Qualifications Essential: Previous experience working as a Revit Technician, BIM Technician or Structural Technician Strong working knowledge of Revit Structural experience is essential Experience producing structural drawings and 3D models Good understanding of structural design and construction Ability to interpret structural engineering drawings and specifications Desirable: Experience working with steel, concrete or timber structures Knowledge of AutoCAD Experience within a structural engineering consultancy Relevant construction, engineering or BIM qualification Roles & Responsibilities Produce accurate 3D structural models using Revit Create detailed structural drawings and documentation Work closely with structural engineers and other members of the design team Develop and update models throughout the project lifecycle Assist with the production of construction and technical drawings Ensure drawings and models are accurate and produced to the required standards Coordinate structural information with other disciplines Contribute to a range of building and structural projects Requirements As a Revit Technician, you will also be expected to: Be technically minded with strong attention to detail Have a proactive approach to your work Be confident working as part of a collaborative design team Have a genuine interest in developing your technical career within structural engineering About Regional Recruitment This position is being advertised by Regional Recruitment Ltd, an award-winning independent recruitment agency established in 2008. We specialise in permanent, temporary, and contract opportunities across the Commercial, Construction, Industrial, Technology, and Engineering sectors. If this Revit Technician role is right for you - Click to apply below. Alternatively call Katie in the Engineering Team on . To explore more roles available across the UK, please visit

Production / Assembly Technician. Production / Assembly Technicians.

Meridian Business Support is recruiting on behalf of a well-established manufacturing business in the Taunton area for a Production Technician.

Are you an experienced manufacturing technician with a background in high-voltage systems and battery assembly? We are seeking a Battery HV Build Technician to join our manufacturing team in Banbury, supporting the production of advanced high-voltage battery systems for industrial applications. Repo

Entry-level Technician role focused on production master data, with flexible hours and benefits including pension and healthcare.

We are looking for a drivenProduction Technicianto join aglobal independent soft drinks manufacturerwith78 manufacturing sitesworldwide including6 sites in the UK based inBridgwater (TA6).

Hours: Monday to Friday, 9:00am - 5:00pm Job Type: Full-time, Permanent About the Role Driver Hire Southampton is recruiting for a Junior Production / Assembly Technician on behalf of our client based in Winchester, who specialise in the manufacturing of lighting systems. This role is ideal for a te

The Senior Production Technician will be able work with complex military connectors and have soldering and wiring skills and enthusiastic to join a busy production team!.

We currently have a fantastic opportunity for a Production Technician to join a leading manufacturing company based in Southampton. The primary role of the Production Technician will involve using specialist equipment and machinery to fabricate preforms and prepare glass ready for drawing into fibre

We are looking for a driven Production Technician to join a global independent soft drinks manufacturer with 78 manufacturing sites worldwide including 6 sites in the UK based in Bridgwater (TA6).

Production Technician needed to operate gantry cranes and forklifts.

Apprentice learns to prepare and measure precise quantities of powder compounds for window manufacturing, ensuring quality and consistency in a hands-on role.

We are looking for an experienced Production Technician xxuwjjq with a background in electronics manufacturing and PCB assembly and for whom quality, precision.

Production Technician needed for a global soft drinks manufacturer in Bridgwater, UK.

Assembles, tests, and troubleshoots electro-mechanical systems, requiring strong technical skills and experience.

Offering exposure to Production Engineering activities across all business units and production areas, Including;. SEAs production processes, introduction of new equipment and tooling, problem solving and process.

Work collaboratively with Production, Test, Stores and Production Engineering teams to meet production targets. As part of ENVEA UK's continued growth, we are recruiting for multiple Production Technician positions to strengthen our manufacturing team on a temporary 3-6 month contract. As a Producti

As Production Engineering Technician, you'll ensureSEAs production processes are effective and predictable through the deployment of appropriate processes, controls, and equipment. The Production Engineering Technicianwill be based at our Barnstaple site. Enhance the reliability and efficiency of SE