Project controls manager jobs in SouthallCreate job alerts

Customer Sales Advisor Full Time – Permanent 8:00am - 4:30pm Or 9:30am – 6:00pm - Monday to Friday with 1 in 4 weekends 8.00am – 5,00pm - Saturday 10.00am – 4.00pm - Sunday Neasden Salary is dependent on experience We are currently recruiting for a Customer Sales Advisor to join our client based in Neasden. The role of the Customer Sales Adviser is to ensure customers receive a consistently high level of service. In addition to providing day-to-day help to customers, the Customer Services Adviser will contribute to the overall cleanliness appearance and overall effectiveness of the operation and, in the absence of other management, may be required to take responsibility for other activities. Principle Objectives: The principle objectives of the Customer Sales Adviser are to guarantee customers an excellent level of service whilst at the same time ensuring the highest level of sales for the Company. To achieve this, the Customer Service Advisor will: • Contribute to the achievement of the financial targets of the store, • Identify and quantify the potential available from each customer for increasing occupancy and revenue within the store, • Respond effectively to the diverse needs of each customer, • Ensuring the store presents itself to a high standard of cleanliness, • Making sure that all Health & Safety procedures are adhered to for the benefit of customers and staff alike., • Comply consistently with all company procedures Main Duties: • Deal effectively with sales inquiries from customers over the telephone and face to face, advising and selling the range of available services to potential and existing customers, • Maximise every sales enquiry to ensure the store hits its target, • Complete all administrative tasks to ensure compliance with company procedures, • Maintain a clean and tidy store, • In instances of lone working or in the Store Manager and Supervisors absence take key holder responsibility., • Ensure that the store ‘bad debt’ is kept to a minimum. Implementing procedures and controls to recover any bad debt, • Ad hoc duties Person Specification: In order to be successful in the position the jobholder will need to demonstrate: • A good level of written and verbal communication skills, • Ability to speak clearly and demonstrate effective listening skills when communicating with customers face to face or over the phone, • Self-discipline, working within guidelines and procedures whilst being attentive to detail, • Comfortable working in a small team environment and adapt to lone working, • Project confidence and knowledge of Company products and services on completion of the induction and probation period, • Day to day liaison with customers, • Achieving a high level of customer service and satisfaction, • Achievement of weekly, monthly and yearly sales targets By applying for this role you give permission for Purely Recruitment to submit your personal information contained within your CV or any other relevant information provided in order for the prospective employer to review your application for the specific role applied for. Purely recruitment will not submit or use your personal information for any other purposes other than for searching for alternative employment

Working for an Electrical or Mechanical Sub-Contractor handling Design & Technical Management. Design Manager - MEP £(phone number removed) Depending on experience Do you have pre or post contract experience? Have you been involved in tenders but then also put the theory into reality based on site ? Our Client Turning over £600 Million in the UK alone Buildings Main Contractor 72% of projects negotiated at single source in the past 12 Months due to excellent customer experience Head Office based off the M40, circa 20 Minutes drive from Uxbridge Highly profitable group People centric business, you will have exposure to real decision makers and your skills won't go unnoticed Pride themselves on working with supply chain and end clients to find WIN Win's. They don't build in a confrontational manner. They are 100% CLIENT Focused. As the MEP Design Manager you will be responsible for managing the design, coordination, and delivery of all mechanical, electrical, and public health (MEP) systems on MAJOR Data Centre Projects worth £40-250 Million. You will be expected to make an impact whether that's bidding on a major project, sitting on a live project or handling 2 smaller but equally as testing scopes. The energy, attitude and focus from the owners to the Senior Leadership team is simply infectious. If you have the same energy, drive and pride in your work this could be a dangerously successful combination! This role ensures that highly resilient, energy-efficient, and compliant systems are delivered in line with program, cost, and operational requirements. You will act as the key interface between consultants, subcontractors, and construction teams, ensuring designs meet mission-critical uptime standards. Key Responsibilities / Design Leadership Manage MEP design from concept through to commissioning and handover. Oversee design of critical systems including: • LV/MV electrical distribution, • UPS systems and battery storage, • Backup generation (diesel generators), • Cooling systems (CRAC/CRAH, chillers, liquid cooling where applicable), • BMS and controls, • Fire detection and suppression systems, • Ensure compliance with Uptime Institute Tier standards (Tier II–IV) where applicable., • Coordination & interface with CSA teams, • Manage design, drawings & specifications, • Working with specialist vendors (e.g., UPS, generators, cooling OEMs), • Proactively manage & promote BIM / Clash detection, • Support procurement of key MEP packages:, • Electrical and mechanical subcontractors, • Specialist suppliers (UPS, chillers, generators) Review subcontractor designs and ensure alignment with employer’s requirements. • Assess technical submissions during tender stage., • Provide technical support during installation., • Lead or support commissioning strategy, • Ensure compliance with: UK Building Regulations/ BSI standards (BS/EN)/ CIBSE guidelines / Uptime Institute Tier classifications Key Skills & Experience Essential • Degree in Building Services Engineering, Electrical Engineering, or Mechanical Engineering / A clear background that shows loyalty , training & success, • Proven experience for a MEP Sub-Contractor or main contractor in a or D&B environment. Software Skills Needed BIM tools (Revit, Navisworks) Load calculation and simulation tools Microsoft Office (Excel for technical/commercial analysis) What We Offer Basic Salary range of £(phone number removed) Up to 10 % Car allowance Business related travel paid If you need to stay over fully expensed apartment or Hotel will be provided Competitive Pension & BONUS Scheme Performance Review Opportunities for career development and RAPID progression

About the Project Plot 25 forms part of the wider Brent Cross Town regeneration in North London and will deliver a purpose-built student accommodation (PBSA) development comprising 662 private student rooms within a high-quality, design-led environment. The scheme has been carefully designed to provide students with a vibrant and supportive living experience that enhances university life while fostering a strong sense of community. The development consists of three interconnected buildings ranging from 9 to 22 storeys in height, providing a diverse mix of room types alongside extensive communal facilities, study areas, recreation spaces and resident amenities. The project represents a significant addition to the Brent Cross Town masterplan and contributes to the creation of a thriving new urban neighbourhood. The Role We are seeking a Quantity Surveyor to join the project team and support the commercial delivery of this landmark student accommodation development. Reporting to the Commercial Manager, you will be responsible for managing costs throughout the construction lifecycle, ensuring robust commercial controls are maintained and supporting the successful delivery of the project on time and within budget. Working closely with the site, design and delivery teams, you will assist with procurement, subcontract management, valuations, change control, cost reporting and final account agreements. The role offers the opportunity to gain exposure to a large-scale high-rise residential project within one of London's most significant regeneration programmes. About You You will hold a degree in Quantity Surveying or a related discipline and have experience working on residential, mixed-use or student accommodation projects. You will possess strong commercial awareness, sound contractual knowledge and the ability to manage stakeholder relationships in a fast-paced construction environment. This position would suit an ambitious Quantity Surveyor looking to further develop their career on a complex, high-profile development with significant opportunities for professional growth and progression

Quality Engineer Role Purpose The Quality Engineer is responsible for ensuring that Ferrovial Construction projects at Heathrow Airport meet client requirements, company procedures, and industry standards. The role promotes a Right First-Time culture and oversees quality assurance and control for site teams, subcontractors, and suppliers. Location: Heathrow Airport Reporting Line: Quality Manager, Ferrovial Construction Key Responsibilities • Primary on‑site point of contact for project teams, subcontractors, and suppliers for all quality control and quality assurance matters., • Ensure compliance with client requirements and Ferrovial quality processes through regular site visits and factory acceptance testing (FAT) of off-site manufactured products., • Plan and lead quality audits and inspections (on-site and at supplier facilities), coordinating with clients and stakeholders, and issuing findings and corrective actions promptly., • Carry out routine construction quality inspections to confirm they meet requirements, including verifying test results, tolerances, materials, execution, and visual aspects., • Assist the Quality Manager in establishing the Quality Verification Plan (QVP) with the client and identify which aspects of the design require verification during construction., • Raise a non-conformance if issues arise, follow resolution steps, and record progress. Analyse trend data and report as needed., • Review, verify and sign control records and inspections, such as site records and related documents, and ensure they are prepared, assembled, and communicated promptly., • Support the construction team in developing the relevant quality controls, such as Inspection & Test plan (ITP) and ensure that the controls are accepted before work starts., • Verify that all materials utilised and installed conform to the required specifications and approved before use., • Assist with digitalising and implementing quality processes, including inspection sheets., • Work with construction, departmental managers and document controllers to ensure quality standards are documented and properly implemented., • Submit Health & Safety Files, Site Records, Production Certification documents and update and distribute Works Package Quality documents, including site records and testing., • Coordinate with the client to confirm benchmarking and sampling events, and ensure their timely completion., • Engage with the project teams and suppliers to reinforce the Quality Culture by supporting Toolbox Talks and weekly quality sessions. Key Skills & Experience • Background in construction Quality Control and Assurance (QC/QA)., • Knowledge of inspections, ITPs, SATs, FATs and documentation., • Strong communication and collaboration skills., • Experience in regulated environments (desirable)., • Quality management plan experience *Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a “Protected Class”), or any other protected class in accordance with applicable laws. #WeAreFerrovial

About the Business We are a well-established structural steel and fabrication business with annual turnover of approximately £20–£30m, delivering projects across London and the South East. With continued growth and increasing project complexity, we are creating a new Financial Controller role to take full ownership of the finance function and support the Board in driving commercial and financial performance. This is an excellent opportunity for an experienced Financial Controller — or an ambitious Finance Manager ready to step up — seeking a senior leadership position with the potential to develop into a Head of Finance / Finance Director role over time. The Role This is a key leadership role responsible for overseeing all financial operations, managing a small finance team, and improving financial reporting processes. You will take ownership of the finance function and play a critical role in supporting operational and commercial decision-making. Key Responsibilities • Lead and manage the finance function and team of 2 staff, • Take ownership of monthly management accounts, • Transition reporting from quarterly to reliable monthly cycles, • Work closely with the Commercial Director on CVR reporting, • Oversee WIP and project margin reporting, • Develop and maintain rolling cashflow forecasts, • Prepare and present board-level financial reports, • Manage intercompany and multi-entity reporting, • Liaise with external accountants and auditors, • Improve financial controls and reporting processes, • Support strategic decision-making and business growth About You We are looking for an experienced and commercially aware finance professional with strong construction or project-based sector experience. Essential Requirements • Experience as a Financial Controller or Senior Finance Manager, • Experience within construction, subcontracting, manufacturing or project-based environments, • Strong understanding of CVR and WIP reporting, • Experience managing finance teams, • Experience producing monthly management accounts, • Strong cashflow forecasting experience, • Experience reporting to directors or senior leadership, • Experience working with multi-entity structures Desirable Experience • Structural steel, fabrication, or manufacturing sector experience, • Experience improving finance systems and controls, • Familiarity with Xero and/or Sage What We Offer • Competitive salary £75,000–£100,000 (DOE), • Opportunity to lead and shape the finance function, • Direct exposure to Board-level decision making, • Long-term progression opportunity to Head of Finance / Finance Director, • Hybrid working flexibility (where appropriate), • Stable and established business environment How to Apply If you are an experienced Financial Controller or Senior Finance Manager looking to take ownership of a finance function within a growing construction business, we would welcome your application. No recruitment agencies — direct applicants only at this stage. #FinancialController #ConstructionFinance #FinanceJobs #FinanceLeadership #ConstructionJobs #StructuralSteel #LondonJobs #WestLondonJobs #HiringFinance #Subcontractor

Mechanical Maintenance Engineer (service and repair) £52 - £55k per annum & overtime, vehicle/ fuel card & package My client is seeking a skilled and reliable Heating Engineer to join our dedicated team at Hammersmith, St Mary's & Charing Cross Hospitals. The ideal engineer will have experience in maintaining, repairing, and installing Low Temperature Hot Water, Medium Temperature Hot Water & Steam Systems. Qualifications & Experience: Proven experience as a heating engineer, preferably in a healthcare & commercial setting. Commercial plant room experience. Strong knowledge of various heating/ hot water systems and controls. Relevant certifications (NVQ Level 2/3, or equivalent). Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Various Tasks to be carried out; Monthly PPM and reactive visits relating to plant; Heating & Hot water Calorifiers, Plate Heat Exchangers. Removing bundles from calorifiers to allow inspection/ de-scaling. Upgrading system components; gauges, safety valves etc. Replacement of key system components on various system; Pumps, motorised valves, modulators, slam shuts, plate packs. Re-pipe works when system fails. Re-pipe works during project works. Various system upgrades due to the age of the systems. Key Responsibilities: Conduct regular inspections and servicing of all heating systems to ensure optimal performance. Respond quickly to heating-related emergencies or system failures. Maintain accurate records of maintenance and repairs via job reporting & good communication with their supervisor/ manager. Work closely with other staff when upgrades are taking place within Hospital wards. Feed all site/ system recommendations back to their line manager. Open to be working at multiple sites in 1 day. Jobs can be very Ad-hoc on these premises due to the age of the building, emergencies can come in at any time. Ability to work with Steel, Galvanised steel, stainless steel, copper & ABS, utilising crimped systems. If you meet the criteria then please contact Russ Cleverley in CONFIDENCE

Reporting to – Head of Mechanical Maintenance Working Hours: Mon – Fri, 8am – 5pm Probation Period: 6 months Job Type: Full Time, Permanent Job Location: Various Sites & Head Office Start Date: Immediate SCOPE 1. To provide leadership and technical oversight within the Water Services department, with a primary focus on statutory L8 compliance, water hygiene, plumbing, drainage and pump maintenance safety management., 2. East West Connect provide Building Services Maintenance (Reactive, Planned Preventative and Small Works) across RVAC, Gas/Heating, Water Services, Fire & Security and Electrical Compliance., 3. This role supports continued company growth and service quality by ensuring safe, compliant and efficient delivery of all water‑related works. KNOWLEDGE, COMPETENCY REQUIREMENTS 1. Prior knowledge of company policies and procedures for delivering safe and compliant water services in commercial and domestic environments (E), 2. Experience working within an employer’s integrated management system (D), 3. HNC/HND Building Services or Mechanical Engineering – NVQ Level 5 or above (E), 4. Experience with CAFM/CMMS (D), 5. Knowledge of SFG20 maintenance schedules (D), 6. Commercial H&S Awareness Course (D), 7. Full clean driving licence (E) This section provides guidance on competency requirements for the Water Services Manager responsible for delivery and compliance across water systems (water hygiene, closed-loop water quality, pumps, LTHW/LTHH interfaces, domestic and commercial plumbing systems, soil/vent and drainage). Competence should be evidenced through qualifications, relevant experience, and demonstrable ability to plan, supervise, assure and report compliant works. Statutory compliance & water hygiene (ACOP L8 / HSG274 / BS 8580) • Understands legal duties and roles (Duty holder/Responsible Person/Authorised Person as applicable), and can support governance for ACOP L8, HSG274 Parts 1–3 and BS 8580-1 requirements., • Can implement and maintain a Written Scheme of Control: task schedules, responsible persons, escalation routes, corrective actions and record-keeping., • Can review/quality-check legionella risk assessments, schematics, asset registers and logbooks; identify gaps and drive closure., • Can manage monitoring regimes (temperatures, flushing, inspections, tank checks, TMV checks) and interpret results to prioritise remedials., • Understands sampling strategy and actions (e.g., legionella, TVC) including liaison with UKAS labs and applying appropriate corrective controls., • Can plan and supervise remedial works (tanks, calorifiers, dead-legs, insulation, blending valves, pipework alterations) ensuring verification and revalidation., • Can lead/participate in internal audits and client audits; produce evidence packs and close out non-conformances., • Can manage incidents (positive samples, loss of control, contamination) with clear containment, communications and documented lessons learned. Closed-loop water quality (LTHW/LTHH & sealed systems) • Understands closed-loop system purpose and common failure modes (corrosion, scaling, microbiological growth, air ingress, fouling) and the impact on plant efficiency and asset life., • Can specify and manage water treatment regimes (inhibitors/biocides as applicable), sampling frequency, target parameters and reporting., • Can interpret water analysis results (e.g., pH, conductivity/TDS, inhibitor residual, iron/copper, microbiological indicators where applicable) and initiate corrective actions., • Can plan and oversee cleaning/flushing activities (power flush, side-stream filtration, chemical clean) including method statements, waste handling and reinstatement testing., • Understands interfaces with LTHW/LTHH plant (boilers, heat exchangers, pressurisation units, expansion vessels, air/dirt separators) and can coordinate works to minimise operational risk., • Can manage specialist subcontractors and verify deliverables (pre/post samples, certificates, commissioning sheets). Pumps, booster sets & pressurisation systems • Working knowledge of common pump systems: domestic boosters/pressurisation, circulation pumps, sump/effluent pumps, macerators, condensate pumps and associated controls., • Can plan PPM and reactive response: set-point checks, vibration/noise checks, seal/bearing indicators, strainers, non-returns, isolation valves and control panel alarms., • Can coordinate safe isolations (electrical and hydraulic), drain-down/refill, venting and functional testing/commissioning., • Can oversee troubleshooting and ensure evidence-based repairs (fault codes, trend data, flow/pressure checks)., • Can manage specialist OEM/subcontractor support and validate handover documentation (test results, settings, photos, certificates). Domestic & commercial plumbing systems (hot/cold water) • Understands hot and cold water distribution principles in domestic and commercial buildings, including storage, recirculation and temperature control., • Working knowledge of Water Supply (Water Fittings) Regulations/Byelaws, backflow prevention (air gaps, RPZ where applicable), and good practice installation standards., • Can manage TMV lifecycle: selection/fit-for-purpose, routine testing, fail-safe checks, servicing and documentation., • Can plan and supervise installation/modification works: isolation strategy, phased shutdowns, commissioning, disinfection/chlorination where required, and reinstatement verification., • Can assess defects and risks (dead legs, stagnation risk, scalding risk, cross-connections, inadequate insulation) and produce remedial plans and quotations. Soil, vent & drainage systems • Understands soil and vent principles, traps/seals, venting, odour issues and common failure modes in above/below ground drainage., • Can manage planned and reactive drainage works including jetting, descaling, root ingress treatment, minor repairs and renewal planning., • Can interpret CCTV survey outputs and translate findings into remedial scope, priority and costed plans., • Understands environmental and H&S controls relevant to drainage works (waste handling, contamination risks, COSHH, and confined spaces awareness where applicable). Project / contract management (delivery, commercial & governance) • Can define scope from surveys/specifications, develop method of delivery, and produce programmes that protect statutory compliance and site operations., • Competent in procurement and subcontractor management: pre-start reviews, competence checks, RAMS review, supervision, and performance management., • Can control cost, labour and materials; produce accurate quotations; manage approvals, purchase orders and invoicing inputs., • Understands change control: identifying variations, pricing, client sign-off, and maintaining a clear audit trail., • Can manage risk and dependencies (access, isolations, permits, shutdown windows, customer impact) and coordinate stakeholders., • Can produce client-ready deliverables: reports, certificates, O&M information (where required), commissioning records and compliance evidence packs. Leadership, competence assurance & quality • Can supervise multiple workstreams while maintaining quality, safety and compliance; knows when to escalate technical risk., • Can set and maintain a competency matrix for engineers and subcontractors (water hygiene, plumbing, pumps, drainage), including refresher intervals and evidence control., • Can carry out technical and documentation QA checks (service sheets, logbooks, photos, certificates) and reduce rework/returns., • Can coach and develop team members through site visits, toolbox talks (supplementary) and targeted training plans., • Can monitor performance against KPIs/SLA and lead corrective actions for recurring defects and non-conformances. Health, safety & environmental competence (water-related works) • Can review and implement RAMS and site permits relevant to water works (e.g., isolations, hot works where applicable, working at height, plantrooms, lone working)., • Understands COSHH principles for water treatment chemicals and can ensure safe storage, dosing, handling and waste disposal arrangements., • Can ensure safe system of work for drain-down/refill, disinfection, sampling and access to tanks/voids/risers (including confined spaces awareness where applicable)., • Can investigate incidents/near misses and implement corrective actions through the IMS. Typical evidence (minimum/desired) Essential evidence: demonstrable experience managing compliant water services delivery in occupied buildings; proven ability to manage subcontractors and control quality/compliance records; strong working knowledge of ACOP L8 and HSG274 requirements; competent report writing and client communication. Typically desired (role dependent): recognised water hygiene/legionella qualification (e.g., City & Guilds/LCA/WMSoc pathway), plumbing qualification (NVQ L2/3) and/or relevant building services qualification; demonstrable experience managing closed-loop water treatment and pump/pressurisation systems; WRAS knowledge/certification. CPD: maintains ongoing CPD covering water hygiene compliance, water treatment/closed systems, and relevant H&S/commercial contract management topics. DUTIES Team Leadership & Management • Lead a team of Plumbers, Water Hygiene Technicians, Pump Engineers and Drainage Engineers to deliver safe, compliant and high‑quality services., • Provide technical mentorship, support and operational direction., • Identify recurring issues and implement root‑cause corrective improvements., • Facilitate regular team meetings focusing on performance, compliance and continual improvement., • Monitor KPIs, conduct 1‑2‑1 reviews, identify training needs and prepare management reports., • Use SFG20 schedules to optimise PPM planning, statutory L8 compliance and resource allocation. Technical Support & Problem‑Solving • Act as the senior technical authority for all plumbing, drainage, pumps, water hygiene and water treatment operations., • Provide escalation support for complex technical issues, commissioning tasks and diagnostic work., • Ensure all works follow statutory guidance, industry best practice and manufacturer recommendations., • Review water treatment reports, logbooks, legionella monitoring records and compliance documents prior to client submission., • Promote technical excellence and hands‑on development within the team. Water Hygiene, L8 Compliance, Auditing & Accreditation • Lead water compliance across all operational sites., • Ensure full compliance with:, • ACOP L8, • HSG274 Parts 1–3, • BS 8580‑1 – Legionella Risk Assessment, • Water Supply (Water Fittings) Regulations, • Manage internal audits of water hygiene tasks, sampling regimes, monitoring results and engineer competencies., • Ensure all logbooks, monitoring sheets, flushing records, sampling data and remedial actions are accurate and complete., • Oversee water treatment activities for closed systems, calorifiers, cooling towers (if applicable), chlorine dioxide dosing and softening systems., • Maintain readiness for external audits including LCA and client audits., • Investigate water hygiene incidents, non‑conformances and near misses, implementing corrective actions. Plumbing, Drainage & Pump Operations • Oversee maintenance and remedial works across:, • Hot & cold water plumbing systems, • Drainage networks (internal/external), • Booster sets, pressurisation units and general plumbing pumps, • TMVs, calorifiers, tanks and expansion vessels, • Ensure assets are verified and documented appropriately., • Conduct lifecycle assessments and make recommendations for repair, upgrade or replacement., • Ensure correct isolation, drain‑down, reinstatement and testing procedures are followed. Asset Management & Lifecycle • Maintain accurate asset registers and statutory documentation., • Prepare quotations aligned with client budgets and technical requirements., • Use CAFM/CMMS platforms to manage compliance tasks, asset information and performance metrics. Health & Safety Management • Ensure full adherence to Health & Safety policies, RAMS and CPPs across all works., • Promote a strong safety culture, ensuring PPE compliance and safe working practices., • Deliver toolbox talks, safety briefings and awareness training. Continuous Improvement & Innovation • Identify improvements to maintenance processes, reducing costs and improving performance., • Stay updated on emerging technologies, water treatment methods and regulatory changes., • Encourage innovation within the team and evaluate new products and tools for operational benefit., • Consistently champion the company’s core values across all activities. MEETINGS • Attend and prepare reports for management meetings., • Attend pre‑bid and interim bid meetings to provide technical input., • Attend client meetings, recording all discussions., • Attend handover and tender meetings, ensuring accurate documentation., • Attend post‑contract review meetings and track improvement actions., • Attend appraisal meetings, company staff meetings, H&S meetings and team meetings. See full job description for more information

Empower Advisory UK (a part of the BMD Group based in Australia) is a project management and advisory business that makes large, complex projects simple. Our team is composed entirely of people who have made a career in delivering large, complex projects both here in UK and in Australia and who know how to make projects deliver ahead of time and budget and generate exceptional outcomes. BMD Group is Australia's leading integrated engineering, construction, and urban development business. We are dedicated to powering futures and creating legacies through a commitment to collaboration. Our team is built on the principles of collaboration and sustainability, ensuring the highest standards are met for every project and client. We are looking for a Planner to join our team. The project project you will be working on is for Thames Water and based at either of their sites in Twickenham & North Surrey (Mogden, Hogsmill & Wisley) Job Summary and role description: The Planner is a crucial on-site leadership role responsible for the technical and operational delivery of a construction package at a major regional infrastructure project. This role requires a proven background in large-scale infrastructure projects, with hands-on site management experience and expertise in Primavera P6 for planning, scheduling, and progress monitoring. Key Responsibilities: Project Planning and Controls · Schedule Management: Develop, maintain, and analyse detailed project schedules for the a major infrastructure including resource and cost loading, in accordance with the project's Integrated Work Schedule (IWS). · Progress Monitoring: Regularly monitor and update the schedule to reflect actual progress, identify potential delays or issues, and provide accurate forecasts to the Project Manager. · Reporting: Prepare and issue regular progress reports, including short-term look-ahead plans and variance analyses, for internal and external stakeholders. · Risk Mitigation: Conduct critical path analysis and "what-if" scenarios to identify and mitigate schedule risks and constraints. · Change Control: Support the commercial team with technical input for time-related compensation events under the contract, ensuring all changes are accurately reflected in the P6 schedule. Qualifications: · Bachelor's degree in Civil Engineering, Construction Management, or a related field. · Proven experience as a Project Engineer or Sub-Agent on major infrastructure or water projects. · Demonstrated proficiency in Primavera P6 and MS Office. · Significant main contractor civils experience, with strong knowledge of engineering principles and construction methodologies. · Experience working with the NEC form of contract is essential. · Relevant safety certifications such as SMSTS (Site Management Safety Training Scheme) are typically required. · A full UK driving license is essential. · Strong organizational, leadership, and communication skills. Benefits We believe our people do their best work when they feel supported — personally and professionally. That’s why we offer benefits that go beyond the basics: • grow your career with specialised learning and development programs, • be recognised at our annual employee awards event and through our Thrive reward and recognition platform, • prioritise wellbeing with mental health support and discounted gym access, • support your family with paid parental leave for primary and secondary carers and flexible work arrangements available, • access perks with novated leasing, specialised Power Perks and discounts with hundreds of retailers. Diversity and inclusion We recognise that we are strengthened by diversity, and we embrace differences as an equal opportunity employer providing a flexible and inclusive workplace. So, join our team, be yourself and help us power futures and create legacies. We’re a purpose and values-led business guided by our values of family, empowered, collaborative and driven. For further details on what makes BMD unique, head to https://www.bmdgroup.global/careers Due to the high volume of applications and enquiries, we are only able to respond to shortlisted candidates. No agency submissions will be accepted

Project Controls Reporting Manager Opportunity with the Civil Works Alliance (CWA), Supporting Sizewell C.

As a Weekend Receptionist at our Barchester care home, you'll provide the warm welcome that helps to make sure every resident and visitor feels at home with us.As the first point of contact for almost everyone who comes to the home, you'll have a vitally important part to play in creating a positive

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to £700 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your op

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

Monitor and report on the profitability of assigned projects, ensuring financial targets are met and reporting key metrics to the Project Manager. Ensure project delivery aligns with the agreed programme timeline, proactively escalating any delays to the Project Manager. As a Project Engineer, you��

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

Become part of our Environment business, and collaborate with top-tier planners, impact assessment specialists and project managers to consent a variety of captivating projects, from local developments to major and national infrastructure, from developing planning strategies to obtaining consent and

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether you're saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employe

Working alongside the Defence Infrastructure Project Manager(s), the Project Planner is the local point for all aspects of planning across the Defence Infrastructure portfolio. As the Assystem’s Defence Infrastructure account continues to grow, we are looking to recruit a dynamic, self-motivated P

Become part of our Environment business, and collaborate with top-tier planners, impact assessment specialists and project managers to consent a variety of captivating projects, from local developments to major and national infrastructure, from developing planning strategies to obtaining consent and

Senior IT Engineer, Project Engineer, Infrastructure Engineer, MSP jobs, Office 365 migration, Windows Server, Networking jobs, Cyber Security, Remote IT jobs, Field Engineer Yorkshire, Virtualisation, Active Directory, IT Projects, Technical Lead, IT Support Engineer, MDM, Backup Solutions, Educat

Managing job profitability of assigned projects and reporting into the project manager. Ensure projects are delivered as per programme and escalate any delays to the project manager. Plan and control labour and materials required to deliver the project.

Experience as a Financial Adviser, Wealth Manager, or IFA.

Become part of our Environment business, and collaborate with top-tier planners, impact assessment specialists and project managers to consent a variety of captivating projects, from local developments to major and national infrastructure, from developing planning strategies to obtaining consent and

Technical Data Project Coordinator/Engineer. This role requires project management skills, planning and delivery as well as presentation communication skills with the ability to communicate complex ideas, high level plans, and large amounts of data to stakeholders and senior management. Undertake an

Monitor and report on the profitability of assigned projects, ensuring financial targets are met and reporting key metrics to the Project Manager. Ensure project delivery aligns with the agreed programme timeline, proactively escalating any delays to the Project Manager. As a Project Engineer, you��

Project Sales Engineer (Pumps / Water Treatment). Are you a technically experienced Business Development Manager from an M&E, Heat Pumps, Water Hygiene, FM, Chemicals or Industrial background looking to work for one of the UK's leading providers of water pump solutions?. You will have technical sale

Monitor and manage project profitability, regularly reporting progress and financial performance to the Project Manager. Technically engineer, install commission small and large projects across the Marlowe portfolio whilst controlling and planning the projects and commissioning works. Offer technica

Ensure that the technical team and any 3rd party technical contractors adhere to the overall project quality plan provided by the project manager throughout the project lifecycle. Identify the technical deliverables, based on the scope agreed by the Project Manager, and use these as a basis to assis

Engineering, Solar, Project, Lead, Technical, Project Manager, Design, Engineer, Electrical, PV. Are you a Solar PV Design Engineer looking to step into a Senior Project Management role where you will be the go to Engineer delivering $multi-million projects and have an influential impact on a well-e

Interaction recruitment is hiring HGV Class 1 Drivers in Marston Gate for a fantastic temp to perm position We're looking for energetic, enthusiastic individuals with a can-do attitude to work as a HGV 1 Driver.You will be delivering to unmanned stores keys & instructions given daily.A FLT licence w

Engineering, Solar, Project, Lead, Technical, Project Manager, Design, Engineer, Electrical, PV. Are you a Solar PV Design Engineer looking to step into a Senior Project Management role where you will be the go to Engineer delivering $multi-million projects and have an influential impact on a well-e

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer.Looking to boost your income over the summer months? Whether youre saving for a holiday, covering extra expenses, or just want more cash in your pocket, nows the perfect time to get started.Join Evri as a self-employed de

Reporting to the Transport Manager, you will be part of a transport office team in a busy and well-established Pallet Network operation.

Manage and coordinate BMS projects throughout the full project lifecycle. As a BMS Project Engineer, you will be responsible for the successful delivery of BMS projects from design through to commissioning and handover. Due to continued growth and a strong project pipeline, my client is seeking an e

This is an excellent opportunity for an Environmental professional with experience in construction, infrastructure or civil engineering projects to play a key role in ensuring environmental compliance and sustainability objectives are effectively embedded throughout project delivery. The successful

Carry Out Project Site Surveys for New and Replacement UPS projects as required. Reporting to the head of projects, you will:. Attend site surveys and project meetings with client representatives and specialist contractors, both on-site and remotely, to review and agree scope, methodologies, and ens

This is a casual, project-based opportunity ideal for anyone interested in taking part in research on a part time basis, depending on their availability and profile fit.

Rullion are looking to Recruit for the Following Role2x Material Resource Planning Controller (MRPC)ASAP Start(1x maternity cover - 18 months) + 1 x12 month contract 37 hours per week Lo

Early Morning Delivery Drivers Needed! Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK.Were looking for reliable, self-employed delivery drivers who are ready to hit the road and make an imp

We Are Recruiting! We are seeking an experienced Transport Planner to join our clients busy and growing team based in Colnbrook.This is an excellent opportunity for someone with strong UK transport planning experience who thrives in a fast-paced environment.Transport Planner Colnbrook<

Van)We require a reliable, hard working person to deliver ambient, chilled and frozen products to our regular buying trade customers.We deliver to Restaurants, leisure sites, cafes and coffee shops on regular routes.The role includes:Being of smart ap

Become a Self-Employed Delivery Driver with Evri and Start Earning This Summer Looking to boost your income over the summer months? Whether youre saving for a holiday, covering extra expenses, or just want more cash in your pocket, now’s the perfect time to get started.Join Evri as a self-employed

Merchandise Financial Planner Responsible for leading BRIS merchandise planning and in-season trading.Fully owns the MFP, WSSI & OTB processes to drive profitable growth across territories, channels and product categories.Acting as a key commercial counterpart to Management, AP and Finance, the role

Working closely with the Project Manager and the project team, you will ensure that project related activities are planned and executed to meet the project requirements in a safe and cost-effective manner. They will actively engage the project construction team in the successful implementation of pr