Siemens jobs in LiverpoolCrear alertas

66kV WTG Authorised Person (AP) £650 a day + offshore benefits + flights and accommodation Offshore Wind Farms, Taiwan Long-term outside IR35 contract (12 months minimum) | Full-time | Rotational shifts We’re seeking experienced 66kV Wind Turbine Generator (WTG) Authorised Persons (APs) to support our client's offshore wind operations across Taiwan. This is a safety-critical role for highly competent HV professionals with proven experience operating as a 66kV AP on Siemens Gamesa wind turbine platforms. Key Responsibilities • Act as the 66kV Authorised Person (AP) for Wind Turbine Generator (WTG) electrical systems, • Perform, control, and document HV switching, isolation, earthing, and re-energisation activities, • Issue and receive Permits to Work (PTW), Sanctions for Test (SFT), and Limitations of Access (LOA), • Ensure full compliance with Siemens Gamesa HV rules, electrical safety procedures, and site standards, • Interface professionally with Ørsted, Siemens, client representatives, and site management, • Support commissioning, fault response, troubleshooting, operations, and HSE activities Mandatory Authorisations & Certifications • Valid Siemens Gamesa 66kV WTG Authorised Person (AP) status, • Valid HV Switching authorisation (ideally Orsted) Training & Competency Requirements • Completion of the full Siemens Gamesa 66kV AP Training Matrix, • Siemens Gamesa HV Electrical Safety Rules and Control of Work / PTW training, • 66kV WTG switching, isolation, earthing, and access procedures, • HV Authorised Person / Senior Authorised Person modules (as applicable), • WTG-specific HV systems training for relevant turbine families, • Valid GWO certifications (all in date) Key Skills and experience: • Minimum 3–5 years’ experience working with HV systems at 66kV or above, • Proven experience operating as a WTG Authorised Person on Siemens Gamesa platforms, • Offshore wind farm experience strongly preferred, • Experience ideally working under Ørsted electrical and safety governance or similarly aligned, • Strong understanding of HV safety principles, risk management, and procedural compliance, • Ability to remain calm, focused, and effective in safety-critical and high-pressure environments, • Excellent communication skills when working within multicultural offshore teams, • High levels of discipline, accuracy, and flexibility, including willingness to work offshore rotational schedules What you get in return: • £650 day rate plus offshore benefits (negotiable and paid in GBP), • Fully expensed flights and accommodation, • A minimum 12 month contract (work estimated up to 18 months with potential for extension), • Work on large-scale offshore wind farms in Taiwan, • Structured safety-focused environment with clear procedures and governance This company is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV to Meg Kewley at DCS Engineering via the link provided. Alternatively, email me at or call 0161 212 2308

Title: Precision Machining Trainer (Secondment Opportunity) Location: Aldermaston, Reading (100% on-site) Contract: 12 Months (ASAP start) Rate: Up to £65.00 p/h Clearance: SC clearance (Active) Role Overview We are seeking an experienced Precision Machining Training Specialist to lead and deliver hands-on technical training within a highly regulated engineering environment. The role is focused on training, coaching, and developing machining capability, ensuring personnel are competent, safety-focused, and aligned to operational requirements. This position is ideal for someone with strong machining experience who can clearly articulate processes and effectively teach others how to perform the role. Key Responsibilities • Deliver practical, hands-on machining training aligned to programme requirements, • Train individuals on how to perform the role, not just theoretical understanding, • Develop and tailor training plans based on individual and programme needs, • Coach, mentor, and support learners in a workshop environment, • Challenge poor or unsafe behaviours and role expected company behaviours, • Ensure all training activities comply with health & safety standards, • Provide supervision within scope of responsibility, • Work closely with internal stakeholders to ensure training outcomes are met Essential Experience & Skills • 2–3 years’ competent machining experience (dependent on individual skill level), • Proficiency in:, • Shop Mill & Shop Turn, • Manual milling and turning, • Hand fitting, • Strong engineering/manufacturing background, • Ability to clearly articulate machining processes and training requirements, • Proven ability to coach, teach, and support others, • Safety-focused and H&S compliant, • Demonstrated leadership capability at First Level Desirable Experience • Teaching or training experience (formal or informal), • Recognised teaching qualification (highly desirable, not essential), • Previous experience in public or private sector engineering/manufacturing environments Qualifications • NVQ Level 3 in Engineering or equivalent (essential), • NVQ Level 4 (desirable) Technical Environment • Shop Mill & Shop Turn, • Siemens interface Security & Eligibility Requirements • British Citizenship required, • SC clearance required from Day 1, • Enhanced DBS required, • Candidates must meet UK residency requirements for clearance, • Dual nationality may be considered for certain cases

Capula, part of the Dalkia Group, is a trusted leader in operational technology and digital transformation. For decades, we’ve delivered advanced system integration across the UK’s most critical infrastructure—from energy and renewables to water and manufacturing. With innovation at the heart of our business, we continue to shape the future of intelligent control and protection systems. We’re proud to foster an inclusive and equitable workplace where diversity is celebrated in all its forms. We actively encourage applications from individuals of minority backgrounds, underrepresented groups, and those with disabilities. Our goal is to create a supportive environment where everyone can thrive and contribute their unique perspectives. 🌟 Summary of the Role We’re seeking an experienced and technically accomplished Lead Engineer to join our Protection & Control team. You’ll be responsible for leading the design and implementation of Protection Systems for major clients across the UK’s Transmission and Distribution sector. These projects span greenfield installations, system upgrades, and integration with existing infrastructure. This is a senior role that blends technical leadership, stakeholder engagement, and strategic delivery. You’ll guide multidisciplinary teams, mentor engineers, and ensure that solutions meet both client expectations and regulatory standards. 🔧 Key Responsibilities • Lead and advise on Protection & Control content across projects, ensuring compliance with relevant standards, • Chair design workshops and review meetings, collaborating with internal and external stakeholders, • Develop system-level designs including SLDs, KLDs, architecture diagrams, and concept-level solutions, • Conduct site visits and non-intrusive surveys to support design validation, tendering, and implementation, • Produce and review technical documentation including Functional Design Specifications, Design Intent Documents, and Compliance Reports, • Lead the development of Protection & Control designs including schematics, general arrangements, layouts, calculations, and schedules, • Support client approval processes and ensure solutions meet all technical and contractual requirements, • Deliver assigned tasks and project milestones on time, within budget, and to the highest quality standards, • Provide technical input and feedback to support sales and tendering activities, • Assist project managers with programme planning, change identification, and cost control, • Proactively identify and manage technical risks to ensure smooth project execution ✅ Candidate Profile We’re looking for someone who brings deep technical expertise and strong leadership qualities: • Proven experience in UK Transmission & Distribution systems, • Hands-on knowledge of Protection & Control technologies from vendors such as GE, Siemens, SEL, ABB, • Working knowledge of IEC 61850 and its practical implementation, • Understanding of substation communication protocols and cybersecurity design considerations, • Structured and analytical approach to problem-solving, • Ability to lead, collaborate, and motivate multidisciplinary teams, • Excellent communication skills with internal teams and external stakeholders, • Degree-qualified in Electrical Engineering or a related discipline (Bachelor’s, Master’s, or equivalent), • Full UK driving licence and willingness to travel, • Familiarity with National Grid standards and policies (desirable but not essential) 🎁 What You’ll Get • 28 days holiday + bank holidays, • Flexible working arrangements, • Pension & private healthcare, • Life assurance policy, • Lifestyle screening, • Salary sacrifice programme, • Mental health assistance programme, • Cycle to work & green car schemes, • Support in achieving professional engineer status (IEng, CEng) and paid membership fees 📧 To express interest in this position, please send your CV and cover letter quoting the job reference number to . Note to employment agencies: We are currently working with only our preferred suppliers.

Senior Stress Engineer (contract) • Regular Remote Worker (occasional travel to Basildon office), • £55ph (Umbrella rate, Inside IR35), • 6 month contract (min) Please note, we can only consider Sole UK nationals for this role, due to security restrictions The successful candidate will be responsible for conducting Stress Analysis, communicating the results and advising on all aspects of Structural Engineering activities. What you’ll do as a Senior Stress Engineer: • Analyse and assess mechanical designs for strength, durability, performance and safety against regulatory and customer requirements using finite element techniques and classical hand calculations., • Generate Finite Element Models and reports as per UK requirements., • Support the selection of manufacturing technologies and materials based on a sound understanding of material physical and mechanical properties and the mechanical fit, form and function of the product., • Conduct structural and thermo-structural analyses of complex Products using Siemens NX., • Advise/support on the development of mechanical structural designs to achieve the desired Product Requirements., • Ensure compliance with all relevant legislative, regulatory and contractual requirements (based on recognised military/civil standards)., • Point of contact for assigned projects, advising on all aspects of stress and structural dynamics throughout the product lifecycle. Technical Requirements - Senior Stress Engineer: • Application of a wide range of classical hand calculation techniques for static and dynamic loading conditions and fatigue assessment (Land, Naval or Airborne equipment)., • Experience of environmental test methods for design verification and working knowledge of design certification for land based and airborne equipment., • Proven experience in the use of Finite Element Analysis software tools (preferably Siemens NX/Nastran) and techniques. This is a hybrid role, based from our Basildon site. The location of working; on-site or home based, will be determined by Project and Security classification

Job description: Are you a hands-on Controls Technician who thrives in both electrical engineering and software programming? Do you enjoy solving complex automation challenges using Siemens TIA S7-1500 PLCs? Ready to be the go-to expert providing critical out-of-hours support that keeps high-perform

Position: Controls Engineer Location: Liverpool Salary: £45,000-£55,000 This is an excellent opportunity for a motivated Controls Engineer to join a leading pharmaceutical engineering team. You'll be working on high-spec projects, contributing to the safe and compliant automation of critical manufacturing systems, with flexibility, support, and strong benefits as part of the package. Job Overview Design and develop control systems for pharmaceutical manufacturing equipment Configure and program Siemens (S7, TIA Portal) and Allen Bradley (RSLogix, Studio 5000) automation platforms Produce and maintain electrical schematics and panel layouts using Eplan 8 Create full documentation packages including: Functional Design Specifications (FDS) Cable and instrument schedules I/O lists and wiring diagrams IQ/OQ validation documentation Collaborate with internal teams and external clients, including project managers, engineers, technicians, and stakeholders Support Factory Acceptance Testing (FAT), on-site commissioning, and system troubleshooting Ensure all control designs meet relevant safety standards and comply with industry regulations such as ATEX, GAMP, FDA, and SIL Requirements Degree or HND in Electrical Engineering, Automation, or related discipline Experience in automation, instrumentation, or control panel design Proficiency with Siemens and Allen Bradley PLC systems Knowledge of SCADA and HMI technologies Skilled in Eplan 8 or similar electrical design tools Strong documentation and technical writing skills Excellent problem-solving and diagnostic abilities Salary & Benefits Salary: £45,000-£55,000 (depending on experience) Pension: 4% employer / 4% employee contributions Holiday: 25 days + bank holidays Additional Benefits: RAC breakdown cover Death in service cover (4x salary) Income protection for long-term illness Employee Assistance Programme (EAP) Discounts at major retailers Access to health & wellbeing app (virtual GP, mental health support, health advice) Hybrid working: Wednesdays and Fridays from home Flexible hours: Start between 7:30-9:30 AM, finish between 4:00-5:30 PM Option to finish at 1 PM on Fridays by accruing time 5 flexible remote working days per year (bookable as needed) Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

CNC Programmer / Setter / Operator (Siemens Milling | Fusion 360).

CNC Programmer / Setter / Operator (Siemens Milling | Fusion 360).

TCU Implementation Consultant – Siemens Toolset Specialist Location: Can be based out of Edinburgh, Basildon, Luton, Southampton (1 day onsite / 4 days remote) 12 months initially Up to £60ph inside IR35 / Umbrella Role Overview: We are seeking a TCU Implementation Consultant with hands-on

Siemens Industry Software Limited. Discover your career with us at Siemens Digital Industries Software. Through our Xcelerator software portfolio, Siemens Digital Industries Software (DI SW) is a leading provider of solutions for the design, simulation and manufacture of products across many differe

A global leader in industrial software is seeking a recent graduate for an Associate Consultant role in Solihull, UK.The position involves a combination of learning and application in project delivery, knowledge sharing, and maximizing team performance.Candidates must possess a minimum 2:1 Bachelor'

A leading engineering firm in Greater London is seeking a Human Factors Engineer to join their team.In this role, you will define the HF strategy and ensure the delivery of a Human Factors Integration program for rail projects.The ideal candidate will have a degree in Ergonomics, experience in safet

At Siemens Energy, we are more than just an energy technology company. We also offer the opportunity to become a Siemens Energy shareholder. Referrals increase your chances of interviewing at Siemens Energy by 2x.

Referrals increase your chances of interviewing at Siemens by 2x. At Siemens Mobility, we believe our people are the cornerstone of our success. We are currently recruiting a highly skilled and motivated Senior Technical Support Engineer - Control Systems to play a key role in maintaining, improving

Referrals increase your chances of interviewing at Siemens Healthineers by 2x. Regional Sales Director – Enterprise Services GB&I Siemens Healthineers. Build internal coalitions and opportunity teams across Siemens Healthineers (Enterprise Services, Digital Health, Finance, Imaging, Lab Diagnostic

Direct message the job poster from Siemens. Referrals increase your chances of interviewing at Siemens by 2x.

A leading software company is seeking recent University graduates for the Associate Consultant role in Solihull as part of their Genesis Graduate Program.This position offers a blend of training and hands-on experience across various business projects.Candidates should possess at least a 2:1 Bachelo

A leading global technology company in Greater London is seeking a Presales Solutions Architect.This role focuses on driving digital innovation by advising C-level executives on the Mendix platform, delivering impactful presentations, and managing Proofs-of-Concept.Ideal candidates will have over 5

The ideal candidate will have strong Siemens PLC and HMI experience, plus leadership skills.

A leading global medical technology company is seeking a Regional Sales Director for Enterprise Services in Great Britain and Ireland.This role involves winning multi-year partnership deals that enhance patient access and outcomes, engaging senior executives, and delivering innovative healthcare sol

A multinational engineering company is seeking a Site Manager to oversee radiotracer production at its facilities in Greater London.This role involves managing operations to ensure compliance with health and safety regulations, leading a team of 20-30 employees, and driving project management at new

When you join Siemens Healthineers, you become one in a global team of scientists, clinicians, developers, researchers, professionals, and skilled specialists, who believe in each individual’s potential to contribute with diverse ideas. The ideal candidate will bring deep expertise in immunoassay

Mendix/Siemens is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. At Siemens, we believe people who’ve had real experiences dealing with being different will excel as leaders.

Siemens Healthineers company, we are at the forefront of delivering precision diagnostics that advance patient care around the world.

A leading technology company in Greater London is looking for an Events Manager to lead and transform how events are approached globally.This position involves planning and executing major tradeshows, internal gatherings, and innovative events that strengthen the brand and engage customers.The ideal

A leading healthcare technology company is looking for a Head of Business Operations & Business Development for their PETNET EMEA division in Bedford.This mid-senior level role involves leading operational initiatives, strategic growth, and collaboration with global leadership teams in the healthcar

Build a brighter future while learning and growing with a Siemens company at the intersection of technology, community and sustainability.

This is an exciting opportunity to define a new role and transform how Siemens Grid Software approaches events globally. From major tradeshows and the annual Grid Software Summit to internal gatherings like Sales Kick-Off and incentive trips, you will shape experiences that set Siemens apart. Coordi

A multinational engineering company is seeking a Site Manager to oversee radiotracer production at its facilities in Greater London.The role involves managing operations to ensure compliance with health and safety regulations while leading a team of 20-30 employees.Key responsibilities include drivi

A leading medical technology company in the UK is seeking a Senior Product Manager to oversee the IMMULITE systems portfolio.The successful candidate will lead lifecycle planning and strategic decisions, requiring expertise in immunoassay systems and strong analytical skills.Ideal applicants will po

Discover your career with us at Siemens Digital Industries Software. Through our Xcelerator software portfolio, Siemens Digital Industries Software (DI SW) is a leading provider of solutions for the design, simulation and manufacture of products across many different industries. Siemens has invested

The role will report into the Head of Human Factors and a Project Engineering Manager in delivering the technical solutions on projects, meeting the required Siemens and industry standards and processes, and ensuring that the products and systems perform to company and user expectations. At Siemens,

They are currently looking for a Production Operative to join them here at the company! As the Production Operative (Bar Saw), you will be cutting a range of rolling product for various customers working from design drawing, adhering to tight tolerances and ensuring their customers receive the most

Information Security Officer - Nibley Court, 3 Turner Drive, Bristol, South GloucestershireCompany DescriptionAt SBS, we’re more than just a technology company – we’re a global fintech partner helping banks and financial institutions transform, innovate, and grow.With over 5,000 employees worl

Part-Time Production Operative Location: Hereford Hours: 8:00 AM – 4:30 PM Days: 3 weekdays– flexible scheduling Start Date - 12th Jan 2026 About the Role: We are recruiting on behalf of our client, a growing manufacturer of pest control products such as vent covers and drain blockers.Du

Cyber Security Officer - Broad St W, Sheffield City Centre, Sheffield S1 2BQ, Company DescriptionSopra Banking Software works with more than 1,500 banks, building societies and specialized finance providers across more than 80 countries worldwide.We help them to develop, deliver and operationalise

Job Title: Warehouse Operative Location: Swindon Pay Rate: £13.Experience: No previous experience required Nexus People are looking for Warehouse Operatives in Swindon to work with our client, who is one of the UK’s leading logistics and distribution companies for

HRGO are recruiting for the Regatta Distribution Centre!.We are looking for multiple warehouse operatives to join the team in Ellesmere Port, assisting with the picking, packing, and dispatch of Regatta's clothing and equipment to customers across the globe! These positions are temporary ongoing con

WHAT IS IN IT FOR YOU Hours: 7am-3pm/ 3pm-11pm / 11pm-7am Training is £12.Temp to Perm opportunity for the right candidate Friday Greggs food delivery Family fun days Looking for a new role as an operative Are you seeking an organisation that offers long term prospects Then take a lo

Job Title: Warehouse Operative.Contract: Temporary ongoing with permanent opportunities available.Gloucester are recruiting for 12 Warehouse Operatives for their pallets repairing operations.We are looking for candidates who are comfortable using tools such as hammers or nail guns; however, please b

Great opportunity to work as a Food Production Operative for our client, a specialist in the dairy industry.Staffline is recruiting Food Production Operatives in Oswestry.Overtime is available and is paid at £22.This is a full-time role working rotating shifts, and the hours of work are: -

Warehouse Operative Pertemps is currently recruiting for a Warehouse Operative for our client based in Aylesbury.Hours: Mon-Thurs 7am-5pm Salary: £23,811.Duties: - Picking and packing customer orders - General warehouse keeping - Maintaining stock accuracy - Ensure timely dispat

Pay: £28,224 - £29,407 per annum.Hours of Work: 4on/4off shift pattern 7am - 7pm or 7pm - 7am.Benefits: 5% employee pension, 5% employer pension, 23 days holiday (increasing with service), Life Assurance.You'll ensure all materials are ready in line with production schedules and conduct routine ch

Ops 2 – Warehouse despatch operative.Location- Hatfield Business Park.We have a fantastic opportunity for a Warehouse Dispatch Operative in the Services logistics Warehouse.You will need to have high levels of accuracy, attention to detail and a strong work ethic; previous export compliance knowle

We are looking for a dependable and proactive Warehouse Operatives to join our client based in Street.Picking and packing items ready for dispatch.Maintaining a clean and organised workspace.Ensuring product quality and presentation standards are met.Good communication and teamwork skills.Potential

Warehouse Operative – Speke, Merseyside.People Solutions are currently recruiting for.This is a fantastic opportunity offering excellent benefits, consistent hours, and genuine potential to grow and progress within the business.Monday to Friday - 08:00 - 16:00.Temporary to permanent opportunities�

Our client is urgently looking for an experienced Information Security Officer to join their team on a contract basis, initially for 6 months with a view to extend.Please note, the role is INSIDE of IR35.You will be required on-site in Surrey 2 days per week.Information Security Officer - Inside IR3

Position: Retail Security Officer Location: Wadebridge Pay Rate: £16.TSS operate on site based rates.Hours: Various Shifts: Various- will include some midnight finishes.Applicants must be available to work weekends.Your Time at Work - To provide a visible uniformed deterrent, to contribute