Trabajos siemens en LondonCrear alertas

Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent – Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: • Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies., • Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design., • Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns., • Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks., • Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control., • Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc., • Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware., • Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure., • Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents., • Conduct system upgrades, testing, and validation for new features, components, and patches., • Implement cybersecurity measures to safeguard SCADA systems against emerging threats., • Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems., • Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process., • Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions., • Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence., • Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network., • Collaborate closely with other designers, construction professionals, and engineering teams., • Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted., • Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers., • Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we’re looking for: • Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector., • Technical and Professional knowledge and experience associated with the role., • Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications., • Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies., • Candidate should have good knowledge & experience working with AutoCAD. Qualifications: • Education: Bachelor’s degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master’s degree may be preferred for senior roles., • Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable., • Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste

To assist the Delivery Manager with the delivery of one of either three packages of work (Electrical, Mechanical and Telecoms) at Old Oak Common Station. This will involve working with the Delivery Manager, project team, 3rd party design consultants, main contractor, Siemens SBS and 3rd party installation contractors to safely deliver the project, on time, to stated quality, at minimum cost and to... ZIPC1_UKTJ

Electrical Maintenance Engineer We are partnered exclusively with a leading global brand within the healthcare industry, that has an exceptional and long-standing reputation. As we move further in 2026, they are now underway with critical expansion projects focused on new manufacturing lines, upgrading equipment and expanding headcount across a number of operational teams. This position will work within a small, experienced maintenance team but with a core focus on Electrical Maintenance activities both within the cleanroom manufacturing areas, as well as the wider plant and facilities. Some of the equipment you will work on includes liquid filling, cartoning, labelling, tube fulling and shrink wrap systems. With both a reactive and proactive focus, the successful hire will need to be a practical problem solver, with a can do attitude and ability to learn quickly. This role will be Monday to Friday – 40 hour week – 1.30pm-10pm shifts. For further details on this hire, please contact Mark Bux-Ryan or apply below. Key experience: • A time-served electrical engineer, • HNC/HND Engineering qualification, • 18th Edition qualified, • Must have worked within FMCG manufacturing – pharmaceutical or transferable regulated environments, • GMP knowledge is a strong advantage, • Knowledge of most of the following would be an advantage 3 phase / single phase motors, Servos, VSD’s, VLT’s and Inverters, • PLC Systems experience, • Application of electrical experience within a mechanical environment is essential Electrical, engineer, maintenance, manufacturing, facilities, GMP, pharmaceutical, FMCG, PLC, wiring, utilities, 18, edition, Siemens, Omron, Allen,

Controls & Automation Engineer Location: North London Type: Full-time We are a fast-growing, mission-driven manufacturing business designing, building, and scaling complex products in-house. Our operations rely on modern automation, rapid new product introduction (NPI), and a strong culture of continuous improvement to support ongoing growth. This is an environment for engineers who want real ownership, technical depth, and the opportunity to influence how manufacturing systems are designed, built, and evolved. About the role We are seeking an experienced Controls & Automation Engineer to join our Operations Engineering team. This role is central to delivering automation capability across the factory and spans the full lifecycle of control systems — from early concept and system architecture through to commissioning, production handover, and ongoing optimisation. You will work across NPI, capital projects, and continuous improvement, collaborating closely with mechanical, electrical, manufacturing, and production teams to deliver scalable, robust solutions. What you’ll be doing • Own and deliver controls and automation projects end-to-end, from requirements capture through to commissioning and production handover, • Specify, design, program, test, and document PLC-based control systems for new equipment, production lines, and NPI activities, • Support new product introduction by developing and adapting automation solutions to meet evolving product and process requirements, • Lead and contribute to continuous improvement initiatives, improving safety, reliability, performance, and maintainability of existing systems, • Provide advanced hands-on support during planned upgrades, commissioning activities, and critical production issues, • Work closely with cross-functional teams to ensure automation solutions are practical, scalable, and aligned with manufacturing needs, • Help shape automation standards, best practices, and system architectures as the factory continues to scale What we’re looking for Even if you don’t meet every requirement, we encourage you to apply if this role aligns with how you want to work and grow. Essential experience • 3+ years of experience programming PLC systems (IEC 61131-3) in a manufacturing or industrial environment, • Strong understanding of electrical schematics, panel design, wiring practices, and electrical safety, • Proven ability to specify, design, and document complete control system solutions, often from high-level manufacturing or NPI requirements, • Experience working in fast-paced production environments, including supporting live systems during upgrades or downtime, • Confident problem-solver with a hands-on, pragmatic engineering approach Desirable / bonus experience • Programming with Siemens TIA Portal, particularly S7-1500 PLCs, • Experience delivering multi-axis motion control systems, • Strong understanding of closed-loop motion control, including linear and rotary servo motors, • Hands-on experience wiring DC control circuits and low-voltage AC power systems to recognised standards, • Knowledge of electrical legislation, machinery safety standards, and functional safety principles, • Experience using CAD tools for mechanical or electromechanical design (e.g. SolidWorks) Why join us • High ownership role with responsibility across NPI, project delivery, and continuous improvement, • Visible impact — your work directly affects production capability, scalability, and product quality, • Fast decision-making environment with minimal bureaucracy, • Strong commitment to technical and personal development, • Competitive salary plus equity/share options, aligning you with the long-term success of the business Benefits • 25 days holiday plus bank holidays, • Competitive salary and equity participation, • On-site food and refreshments, • Health and wellbeing benefits, including healthcare support and cycle-to-work schemes, • Regular team events and employee referral incentive

BMS Commissioning Engineer London & South East Salary & Benefits • £60,000 – £70,000 DOE, • Company Car / Car Allowance, • 10% Pension Contribution, • Private Healthcare, • Annual Bonus Scheme, • Overtime Available, • 25 Days Holiday + Bank Holidays, • Ongoing Training & Career Development The Company An established and respected smart buildings and controls specialist delivering innovative Building Management System (BMS) solutions across commercial, healthcare, education, pharmaceutical, and critical environment projects throughout London and the South East. Due to continued growth and a strong project pipeline, we are looking for an experienced BMS Commissioning Engineer to join our engineering team. The Role The successful candidate will be responsible for the commissioning, testing, and optimisation of BMS systems across a range of projects. You will work closely with project managers, engineers, subcontractors, and clients to ensure systems are delivered to specification, on time, and to the highest standards. Key Responsibilities • Commission BMS systems including HVAC controls, plant interfaces, and energy management systems, • Carry out point-to-point checks, functional testing, and system validation, • Diagnose and resolve software, networking, and control issues, • Modify and optimise BMS software and graphics where required, • Ensure all systems operate in accordance with design specifications and client requirements, • Produce commissioning documentation, test sheets, and O&M information, • Attend client meetings, site inspections, and progress reviews, • Support project handovers and provide client training where necessary, • Work collaboratively with installation engineers and project teams, • Ensure compliance with health & safety standards and site regulations Requirements • Proven experience as a BMS Commissioning Engineer, • Strong knowledge of BMS platforms such as Trend, Tridium, Siemens, Schneider, Honeywell, or Delta, • Good understanding of HVAC systems and controls, • Ability to read and interpret technical drawings and schematics, • Strong fault-finding and problem-solving skills, • Experience commissioning large commercial or critical environment projects, • Excellent communication and client-facing skills, • Full UK Driving Licence Desirable • Experience with data centres, pharmaceutical, or mission-critical projects, • Electrical qualifications or controls-related certifications, • Knowledge of IP networking and integration protocols such as BACnet or Modbus Why Join Us? • Excellent salary and benefits package, • Opportunity to work on prestigious London projects, • Long-term career progression opportunities, • Supportive and technically strong engineering team, • Stable and growing business with strong industry reputation

Senior MRI Radiographer Oryon Imaging | London Private Healthcare About Oryon Whether someone is proactively health conscious, or unwell and in need of answers, we believe that everyone should have access to affordable, accessible and rapid imaging - and just as importantly, they should feel in control of that journey. At Oryon, we provide high-quality diagnostic healthcare in an environment designed to feel calm, professional and reassuring. Our teams work closely together to deliver a service that is both efficient and genuinely patient-centred. About the Role We are looking for an experienced Senior MRI Radiographer to join our dedicated MRI team. You will work in a fast-paced but supportive environment, delivering a high standard of imaging while maintaining a strong focus on patient experience. This role offers the opportunity to work with Siemens MRI scanners, across a varied caseload including neuro, MSK and whole-body imaging. You will be part of a close-knit and collaborative team, working alongside radiologists and colleagues in an environment where professionalism, attention to detail, and patient experience are central. Key Responsibilities • Undertake all MRI imaging procedures in line with modality-specific protocols and best practice, including IR(ME)R 2017, CQC, SOR and RCR guidelines, • Conduct MRI safety screening, obtain informed consent, and ensure patient suitability for examinations, • Ensure the safe use and maintenance of MRI equipment, adhering to local safety policies and reporting issues as required, • Administer contrast media and associated medicines in accordance with PGDs and medicine management policies, maintaining accurate records, • Support appropriate triage and prioritisation of patients, • Accurately record and manage patient data using RIS/PACS systems, • Deliver care that respects patient dignity, individuality, and cultural or spiritual needs, • Maintain strict patient confidentiality in line with data protection requirements, • Respond to enquiries from patients, referrers, and stakeholders in a professional manner, • Liaise with consultant radiologists regarding imaging protocols and referrals, • Perform quality assurance checks on equipment and take appropriate action where required, • Participate in clinical audit activities, including health & safety, infection control, • Manage clinical stock and supplies efficiently, ensuring appropriate stock control, • Comply with infection prevention and control policies and company health & safety standards, • Identify, report, and escalate risks that may impact patient or staff safety, or service quality, • Ensure compliance with CQC and internal governance requirements, • Report incidents and complaints in line with company policy, • Participate in appraisal processes and ongoing performance review, • Support the induction, training, and development of new staff, • Complete and attend mandatory training and maintain accurate CPD records, • Work collaboratively within the team, supporting and mentoring junior colleagues About You You are an experienced MRI Radiographer who combines technical expertise with a thoughtful, patient-centred approach. You are confident working within a busy, well-managed service, maintaining both efficiency and attention to detail while ensuring each patient feels supported and reassured. Essential • Degree in Radiography (or equivalent), • HCPC Registration, • Minimum 2 years’ MRI experience across a broad range of examinations, • Strong understanding of MRI physics and protocol optimisation, • Knowledge of clinical governance, health & safety, and infection control, • Commitment to ongoing professional development Desirable • Cannulation certification, • PGDip or MSc in MRI/Radiography, • Experience within private healthcare or high-throughput environments Key Attributes • Clear, composed and empathetic communication, • Ability to reassure and support patients with confidence, • Strong organisational skills and attention to detail, • Confident use of RIS/PACS systems, • Professional, reliable and collaborative approach, • A high level of IT competency, • Confidentiality, discretion and trustworthiness This is not a restrictive list of duties, and all team members may be required to carry out additional tasks within their capability. Benefits & Rewards At Oryon we reward and recognise commitment to work with company benefits which include: • Competitive salary (Band 7 equivalent), • 27 days annual leave + bank holidays, • Additional annual leave awarded with length of service, • Contributory pension & life insurance, • Private healthcare and Diagnostic imaging for friends and family, • Access to CPD courses and ongoing development, • Enhanced maternity and adoption leave, • Cycle to Work scheme & Season Ticket Loan, • Employee benefits platform (discounts and rewards), • Employee Assistance Programme, • Refreshments available on-site, • Team events: from breakfast at the office, afterwork activity or drinks to all day summer teambuilding, themed parties to occasional weekends away abroad Apply now via email: hr@oryon.co.uk Please note that any offer of employment will be subject to a satisfactory Enhanced Disclosure and Barring Service (DBS) check. Additionally, you are required to have proof of the following vaccinations and/or safe immunity levels: Hep B, MMR, DPT, BCG (Tuberculosis) and Varicella (Shingles/Chickenpox) (If you do require Oryon Imaging to arrange pre-employment checks for the above upon offer of employment, please do notify us as soon as possible)

🚨 Semi-Static BMS Service Engineer | Central London 🚨 Looking for less commuting, more stability, and the chance to grow your career on a flagship London site? We’re hiring a BMS Service Engineer for a unique semi-static role — 3 days per week on a prestigious Central London site, with 2 days mobile/flexible across London. This role would suit: 🔹 An experienced engineer looking for a better work-life balance 🔹 A junior engineer wanting structured exposure, training, and progression 🔹 Someone ambitious who wants the opportunity to eventually run the site 💥 What’s on Offer: ✅ Competitive salary + car allowance ✅ Travel paid ✅ Free meals & on-site gym ✅ Overtime available ✅ Ongoing training & development ✅ Clear progression opportunities ✅ Mix of stability and variety 🔧 The Role: • PPM & reactive maintenance on BMS systems, • Fault finding, upgrades & small works, • Working across major BMS platforms including Trend, Tridium, Siemens & Schneider, • Client-facing role on a high-profile site, • Energy optimisation & system performance monitoring 📍 3 days static in Central London 🚗 2 days mobile/flexible working A brilliant opportunity to join a growing team and build a long-term career in a premium environment.

Location: London (Hybrid between site-based commissioning & office/remote documentation and coordination) Contract Duration: 12 months + extensions Start Date: ASAP / Immediately Working Pattern: Monday to Friday (long hours typical of data centre delivery) + potential weekend work Rate: £900–£1,100 per day Outside IR35 Responsibilities: Lead and manage all BMS commissioning activities on a large-scale data centre project. Develop and implement commissioning strategies, plans, procedures, and documentation specific to BMS and integrated systems. Oversee commissioning of HVAC systems, chillers, CRAH/CRAC units, power monitoring, and critical environment controls via BMS. Coordinate and manage commissioning engineers, subcontractors, and vendors to ensure efficient delivery. Act as the primary interface between client, project management, design teams, and specialist contractors. Ensure all commissioning activities comply with project specifications, industry standards, and health & safety requirements. Review and approve test scripts, functional performance testing (FPT), and integrated systems testing (IST). Manage issue resolution, fault-finding, and system optimisation to meet performance and reliability targets. Oversee documentation, including commissioning reports, test results, and handover packs. Support project handover, ensuring systems are fully operational, validated, and meet uptime requirements. Requirements: Proven experience as a BMS Commissioning Manager on data centre or mission-critical projects Strong knowledge of BMS platforms (e.g., Trend, Tridium, Siemens, Schneider) Extensive experience commissioning HVAC and critical cooling systems within data centres Strong understanding of integrated systems testing (IST) and Level 3–5 commissioning processes Demonstrated experience managing large commissioning teams and multiple subcontractors Excellent knowledge of health & safety standards and commissioning best practices Strong stakeholder management, communication, and leadership skills Ability to manage complex programmes and deliver to tight deadlines Right to work in the UK and flexibility to be site-based as required

Senior Controls & Instrumentation Engineer - London London | Kantor Energy (Part of Dornan Engineering Group & Turner Construction) Kantor Energy is seeking a Senior Controls & Instrumentation Engineer to join our growing London team, supporting innovative and sustainable heat network and energy projects across the UK. With over 12 years’ experience delivering low-carbon energy solutions, Kantor combines the agility of a specialist engineering contractor with the strength and backing of the wider Dornan Engineering Group. The Role You’ll play a key role across the full project lifecycle — from detailed design through construction and commissioning — working on cutting-edge heat network and energy centre projects. Key responsibilities include: • Leading C&I design and site engineering activities, • Managing controls systems and instrumentation design, • Collaborating with clients, suppliers, and multidisciplinary teams, • Supporting procurement, commissioning, and project delivery, • Acting as senior C&I engineer during design and lead site engineer during construction phases What We’re Looking For • Degree qualified in Engineering (Level 8 / Honours Bachelor’s), • 7+ years’ experience in Controls & Instrumentation engineering, • Strong knowledge of BMS and PLC control systems, • Experience with Siemens and Trend platforms preferred, • Excellent stakeholder management and communication skills, • Passion for sustainable energy and innovative engineering solutions Why Join Kantor? • Be part of a fast-growing business delivering low-carbon energy projects, • Work within a collaborative, close-knit engineering team, • Gain exposure across the full project lifecycle, • Career development support, including CPD and Chartership pathways, • Employee wellbeing support and team-focused culture, • Backed by the strength of Dornan Engineering Group and Turner Construction If you’re looking to work on meaningful energy infrastructure projects in a dynamic and supportive environment, we’d love to hear from you. Please contact Sean Hitchman on sean.hitchman@dornangroup.com / 07553002453 #LI-SH1

Controls Engineer – Special Purpose Machinery Location: London Salary: Up to £70,000 + Benefits Job Type: Permanent | Full-Time We are recruiting for an experienced Controls Engineer to join a growing engineering business delivering bespoke special purpose machinery projects across a range of advanced manufacturing and industrial sectors. This is an excellent opportunity for a Controls Engineer with strong Siemens and/or Beckhoff PLC experience who enjoys working on full lifecycle automation projects — from concept and design through to commissioning and customer handover. The Role As a Controls Engineer, you will play a key role in the development of automated machinery and turnkey systems for high-profile industrial clients. You will be involved in both office-based design work and onsite commissioning activities across the UK and occasionally internationally. Key Responsibilities • PLC software development using Siemens TIA Portal and/or Beckhoff TwinCAT, • HMI and SCADA development, • Electrical controls design and system architecture, • Full project lifecycle involvement from concept through to FAT/SAT, • Machine commissioning, testing and troubleshooting, • Integration of motion control, servo drives, robotics and safety systems, • Supporting continuous improvement and innovation across machinery projects, • Working closely with mechanical, electrical and project engineering teams, • Producing technical documentation and customer support materials Requirements • Proven experience as a Controls Engineer, Automation Engineer or PLC Engineer, • Strong Siemens and/or Beckhoff PLC programming experience, • Experience working on special purpose machinery, automated production lines or bespoke machinery projects, • Knowledge of motion control, drives, sensors and industrial communication protocols, • Ability to read and understand electrical schematics, • Experience commissioning automated systems onsite, • Strong problem-solving and fault-finding skills, • Full UK driving licence Desirable Skills • Siemens TIA Portal, S7, WinCC, • Beckhoff TwinCAT 3, • Servo motion control systems, • Safety PLCs and machine safety standards, • Industrial networking (Profinet, EtherCAT, Ethernet/IP) What’s On Offer • Salary up to £70,000 depending on experience, • Opportunity to work on technically challenging bespoke machinery projects, • Career progression within a growing automation engineering business, • Exposure to cutting-edge automation technology, • Pension scheme, • Overtime and travel allowances where applicable

Our client is looking for experienced SCADA Engineers - Hybrid - London / Amsterdam / Germany Job Description: You will be responsible for supporting SCADA integration and communication systems across utility-scale Battery Energy Storage System (BESS) projects throughout the EMEA region. The role will focus on SCADA systems integration, monitoring systems, communication protocols, FAT/SAT testing, and commissioning support for transmission and distribution connected renewable energy projects. You will work closely with project teams, field engineers, clients, and subcontractors to support successful integration of SCADA and monitoring systems into TSO and EMS environments. The main responsibilities include: Supporting SCADA integration into TSO and EMS systems Supporting configuration of monitoring systems and communication interfaces Supporting FAT/SAT testing and commissioning activities Working with SCADA protocols including: IEC61850, DNP3, Modbus and IEC104 Supporting troubleshooting activities during project execution and commissioning Supporting development and maintenance of SCADA documentation and communication diagrams Supporting interfaces with clients and subcontractors during project execution Requirements: Essential Degree in Electrical Engineering, Automation, Controls Engineering, Computer Engineering or equivalent experience Experience within utilities, transmission & distribution, substations, renewables, or energy infrastructure projects Knowledge of SCADA systems and communication protocols including: • IEC60870-5-101/103/104, • IEC 61850, • DNP3, • Modbus TCP/IP Experience with: • RTUs, • PLC systems, • SCADA gateways, • Data concentrators, • SEL / Siemens systems Experience supporting commissioning, FAT/SAT testing, or system integration activities Strong communication and troubleshooting skills Fluent English Desirable BESS / Energy Storage experience OT networking knowledge Linux / Python / Github experience German language skills Contract Details: 12-month initial contract Hybrid working EMEA travel required Rate dependent on experience

Join Our Team as a Fire Detection Field Service Specialist Field based role on Land, Offshore & Overseas About the Role We have an exciting opportunity for a Fire Detection Field Service Specialist to join our dynamic Marine Service team. You’ll be responsible for servicing and commissioning fire detection systems on naval vessels, commercial marine projects, including offshore and overseas assignments. What We Offer • Competitive salary and company car, • Hybrid working - WFH, • On-site/offshore allowances and overtime payments, • 25 days paid holiday plus bank holidays and sick pay, • Onsite daily allowance, • All travel and mobilisation costs covered and work from home when not on site, • Comprehensive benefits: 7% matched pension, free life assurance, employee assistance programme, referral scheme, discounts on high street brands and Johnson Controls products, cycle-to-work scheme, • The opportunity for additional earnings through our Ship2Shore programme Key Responsibilities Service & Maintenance • Perform planned and reactive servicing of marine fire detection and alarm systems (smoke, heat, multi-sensors, aspirating detectors, water mist), • Diagnose, repair, and upgrade equipment to manufacturer and statutory standards, • Complete detailed service reports and log all site work Commissioning • Lead or support commissioning of new and upgraded systems on vessels and offshore installations, • Carry out programming, integration, and functional testing, • Collaborate with electrical, automation, and shipbuilding teams Graphics Systems • Install, configure, and troubleshoot fire alarm graphics interfaces (annunciators, HMI systems), • Ensure accurate real-time system status, • Liaise with software providers and customer IT teams Customer Support • Provide technical guidance to vessel crews and operators, • Deliver training sessions and demonstrations, • Represent the company professionally on board and in project meetings Qualifications & Experience Essential • Proven Electrical Engineering experience, • Degree or qualification in Electrical/Electronic or Control & Instrumentation Engineering, • Ability to interpret client technical specifications, • Minimum 3 years’ experience servicing and commissioning fire detection systems (BS 5839), • Familiarity with major brands (Autronica, Tyco, Siemens, Consilium, Kidde, etc.), • Hands-on experience with graphics systems and HMI interfaces, • Full UK driving licence, • Willingness to work ad-hoc and offshore and overseas Desirable • Marine/offshore field experience, • Knowledge of Ethernet/IP networks and serial interfaces, • Offshore safety training (BOSIET, HUET, STCW) – training provided if not held, • PLC integration experience, • SC security clearance (background check required) Why Join Us? This is more than just a job—it’s a chance to be part of a team that values expertise, safety, and innovation. You’ll work on cutting-edge marine projects and grow your career within a global organisation. Apply today and help us shape a safer future both on land & at sea. Successful candidates will be expected to meet the requirements of the OEUK safe weight limit requirements. This policy applies to all offshore installations operating under accepted Safety Cases as defined in the Offshore Installations (Offshore Safety Directive) (Safety Case etc.) Regulations 2015. For further information on this, please refer to https://oeuk.org.uk/industry-support/hse/safe-weight-limit-policy/ #LI-VS2 #LI-Onsite #RMDFL

MPI are looking for a Resource Co-Ordinator based in Swanley A Resource Coordinator plays a pivotal role in ensuring the seamless coordination of project staffing and office operations. Responsible for the buying and coordinating of all Third-Party Worker requirements, managing professional & technical roles and contingent labour services to support all project needs. The role spans candidate sourcing, contractor compliance, and administrative support, all aimed at enabling efficient project delivery and maintaining operational excellence within the Swanley office. Core Responsibilities 1. Candidate & Contractor Sourcing • Sourcing via Preferred Suppliers List (PSL): Ensuring all agency hires are made through approved vendors, maintaining compliance and cost control., • Project-Based Sourcing: Coordinating staffing for midweek, weekend, and commissioning projects—likely requiring flexibility and quick turnaround., • Forecasting Resource Demand: Working closely with project teams to anticipate staffing needs, which helps avoid delays and ensures smooth project execution. 1. Contractor Management & Compliance • Confirmation & Coordination: Verifying selections with both internal teams and external suppliers to ensure alignment., • Maintaining Commissioning Spreadsheets: Keeping detailed records of contractor assignments, likely for tracking, reporting, and audit purposes., • Requisition to Pay Process: Ensuring all contractors have valid rate agreements, purchase orders, which is crucial for financial tracking and payment., • Rate Card Adherence: Making sure contractor rates align with agreed terms—important for budget control., • IR35 Compliance: Ensuring all contractors are assessed correctly under IR35 legislation, which affects tax and employment status., • Account management: Managing the communication and KPI’s of Tier 2 suppliers ensuring that up to date on procedures, providing suitable resources, issuing performance feedback & keeping up to date on supplier contacts etc 1. Data Integrity & Auditing • Internal Audits: Reviewing data held by the central resourcing team to ensure accuracy and compliance., • Inbox Management: Monitoring shared inboxes to ensure timely responses to queries and requests. 1. Training & Certification • Booking Courses: Coordinating with suppliers and contractors to ensure certifications are up to date—important for safety and legal compliance., • Compliance: Ensuring all third-party workers meet the expectations of the hiring manager from day one of their employment 1. Office & Administration Support • Reception Cover: Stepping in to support front-of-house duties when needed., • General Admin: Supporting the Swanley office with day-to-day administrative tasks., • PPE Ordering: Managing personal protective equipment for permanent staff—ensuring safety and readiness. What You’ll Need to Succeed • Minimum 1 years’ experience in sourcing and procuring agency staff for technical, professional, and contingent labour roles — ideally within the railway or infrastructure sector., • Proven ability to build and maintain strong relationships with internal stakeholders and external suppliers, sharing best practices across the business., • Excellent organisational and multitasking skills, with the ability to manage competing priorities effectively., • Demonstrated success in delivering contractor resourcing solutions, particularly for projects., • Capable of working independently with minimal supervision, while also contributing to a collaborative team environment., • Proficient in Microsoft Excel and Word, with strong attention to detail in data handling and reporting., • A flexible, proactive mindset with a willingness to learn and adapt in a fast-paced environment. What else do I need to know about Siemens? At Siemens, we are committed to creating an inclusive workplace that reflects the diversity of the communities we serve. We value the unique contributions of every individual and believe that diverse perspectives drive innovation and excellence. We are proud to be an equal opportunity employer and welcome applications from all qualified candidates, regardless of background, identity, or experience.

BMS Engineer – Commissioning & Service\nLocation: London & South East\nSalary: Up to £70,000 DOE\nJoin a forward‑thinking UK leader in Smart Building & Energy Management, known for delivering intelligent, efficient, and sustainable building solutions for over two decades. This organisation specialises in advanced Building Management Systems (BMS) across multiple environments—including leisure, education, retail, healthcare, and large commercial properties—helping clients create smarter, greener, and more cost‑effective facilities.\nAs part of a dedicated technical team, you’ll be involved in the installation, servicing, commissioning and ongoing optimisation of a wide range of BMS and HVAC control systems. The company works with a variety of industry‑leading platforms such as Siemens, Trend, Tridium, Distech, and Landis & Staefa, giving you exposure to diverse technologies and system architectures.\nWith deep expertise across BMS and HVAC controls, the business is recognised for its professional standards, problem‑solving capability, and commitment to long‑term client relationships. Services include preventative maintenance, energy‑management optimisation, system upgrades, and delivering detailed diagnostic reports to support improved building performance.\nResponsibilities\n Commissioning, testing, and troubleshooting Building Management Systems (e.g., Tridium, Distech, TREND).\n Performing routine and preventive maintenance on BMS/HVAC control systems.\n Programming and configuring BMS controllers and networking devices.\n Ensuring compliance with industry standards and health & safety requirements.\nRequired Skills & Experience\n Experience with BMS systems, HVAC controls, and building automation technology.\n Understanding of networking protocols and system integration principles.\n Proficiency in BMS programming (Tridium, TREND, Distech, or similar platforms).\n Ability to interpret electrical and mechanical schematics.\n * Strong diagnostic and problem‑solving abilities.\nApply now via the link

BMS Small Works Project Manager\nLocation: Canary Wharf\nSalary: £70,000 – £75,000 (Basic) + Benefits\n\nWe are seeking an experienced BMS Small Works Project Manager to join a growing team delivering fast-paced building controls projects across commercial environments. This role will focus on managing projects typically ranging from £80k to £200k, ensuring efficient delivery, high quality, and strong client satisfaction.\n\nKey Responsibilities\n\n \n\n Manage the full lifecycle of multiple BMS small works projects from award through to completion\n\n \n\n Oversee project planning, programming, and resource allocation across several concurrent projects\n\n \n\n Coordinate engineers, subcontractors, and suppliers to ensure smooth project delivery\n\n \n\n Ensure successful integration of BMS systems with mechanical and electrical plant\n\n \n\n Act as the main point of contact for clients, maintaining strong working relationships\n\n \n\n Monitor project performance, ensuring delivery on time and within budget\n\n \n\n Manage commercial aspects including variations, cost control, and reporting\n\n \n\n Ensure compliance with health & safety standards and company procedures\n\nRequirements\n\n \n\n Proven experience managing BMS or controls small works projects\n\n \n\n Strong technical understanding of Building Management Systems (BMS)\n\n \n\n Good knowledge of mechanical & electrical plant systems\n\n \n\n Experience delivering projects in the £80k–£200k range\n\n \n\n Ability to manage multiple projects simultaneously in a fast-paced environment\n\n \n\n Strong communication and stakeholder management skills\n\nDesirable\n\n \n\n Experience with leading BMS platforms (e.g. Trend, Tridium, Siemens, Schneider)\n\n \n\n Background in building services, controls, or a related engineering discipline\n\n \n\n Relevant technical or engineering qualification\n\nWhat’s on Offer\n\n \n\n Competitive basic salary (£70k–£75k)\n\n \n\n Car allowance\n\n \n\n Private healthcare\n\n \n\n Pension scheme\n\n \n\n 25 days holiday + 8 bank holidays\n\n \n\n Opportunity to work on a variety of fast-moving, technically engaging projects\n\n \n\n Career progression within a growing and forward-thinking business\n\nThis is an excellent opportunity for a driven Project Manager who enjoys delivering multiple projects and thrives in a dynamic, client-facing environment within the smart buildings sector

Electronic Design Layout Engineer\n London, Hybrid Working (2 Days Per Week on Site Near Fenchurch Street Station)\n £40,000 - £55,000 + Benefits\n\nExcellent opportunity for a Layout Engineer to join an innovative semiconductor company working on next-generation memory technology, offering the chance to build your career in a highly specialist and growing sector.\n\nThis company are a forward-thinking engineering business developing advanced low-power semiconductor solutions. With a strong technical team and exciting future plans, they offer a collaborative environment where engineers can gain hands-on experience on genuinely cutting-edge projects.\n\nIn this role you will support layout and physical design activities across a range of semiconductor products. You will work closely with experienced engineers across analogue, digital and device teams, using industry-leading EDA tools to develop and optimise designs.\n\nThe ideal candidate will have 1 to 2 years of industry experience within layout engineering, physical design, PCB layout or IC layout. Experience with EDA tools is essential, with exposure to semiconductor environments highly beneficial.\n\nThis is a fantastic opportunity for a junior engineer looking to progress quickly, gain exposure to advanced semiconductor design, and join a business where your development will be actively supported.\n\nThe Role:\n\nLayout and physical design for semiconductor products\nUse EDA tools to create, modify and optimise designs\nWork with analogue and digital teams on new product development\nSupport design reviews, testing and documentation\nHybrid working with 2 days per week in the London office\n The Person:\n\n1 to 2 years' experience in layout / physical design / PCB / IC design\nExperience with EDA tools\nFamiliarity with Synopsys, Cadence Design Systems or Siemens EDA advantageous\nInterest in semiconductor memory technology beneficial\nKeen to develop within a specialist engineering environmentRise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.\n\nThe salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.\n\nWe are an equal opportunities company and welcome applications from all suitable candidates

BMS PROJECT MANAGER (Contract)\n\nLondon (hybrid/flexible) | 6-12 months | £400-£500 per day (Outside IR35)\n\nWe're working with a prestigious client in the building controls industry who are looking for an experienced BMS (building management systems) Project Manager to oversee a range of small to large-scale projects across London and the surrounding areas.\n\nThis is a great opportunity for someone with strong BMS expertise who enjoys leading projects from start to finish, ensuring quality, budget and timescales are consistently achieved.\n\nWhat you'll be doing:\n\nLeading contract meetings and managing project status from handover through to completion\n\nWorking closely with customers to understand and deliver site-specific requirements\n\nProviding technical guidance to clients and colleagues across BMS projects\n\nManaging budgets, supplier orders and ensuring efficient project cash flow\n\nDesigning control strategies, point lists and system descriptions for commissioning teams\n\nStaying up to date with industry developments and applying them to projects\n\nWhat we're looking for:\n\nProven Project Management experience within the BMS/BEMS industry\n\nStrong knowledge of systems such as Trend, Tridium, Schneider, Siemens\n\nGood understanding of M&E principles and how they apply to BMS\n\nCommercial awareness with the ability to maximise profitability on projects\n\nConfident IT skills and ability to train/mentor others\n\nWhy apply?\n\nAttractive daily rate (Outside IR35)\n\nFlexible/hybrid working available\n\nOpportunity to work on high-profile projects with a leading name in the industry\n\nIf you're ready to take on this exciting contract role, apply today

BMS Service Engineer - Contract\n\nRate: Up to £380 per day (Outside IR35)\n Contract Length: Initial 6 months (strong likelihood of extension)\n Location: London - travel across Greater London required\n\nWe're working with a well-established and highly regarded organisation that is looking to bring on an experienced BMS Service Engineer for a long-term contract across London. You'll be supporting a portfolio of high-spec commercial and industrial buildings, working with modern BMS technologies in a varied, field-based role.\n\nThe Role\n\nService, maintenance, fault-finding and commissioning of BMS systems\n\nAttending multiple sites across Greater London\n\nWorking on a range of modern, technically advanced buildings\n\nOpportunity to receive training on additional BMS platforms\n\nField-based position requiring strong autonomy and organisation\n\nWhat We're Looking For\n\nProven experience working with BMS systems (Trend, Tridium, Siemens or similar)\n\nStrong fault-finding and diagnostic capability\n\nComfortable working independently and managing your own workload\n\nBackground in commercial and/or industrial environments\n\nFull UK driving licence\n\nWillingness to learn and adapt to new systems and technologies\n\nWhat's On Offer\n\nDay rate up to £380 (Outside IR35)\n\nInitial 6-month contract with excellent extension potential\n\nExposure to a wide range of sites and cutting-edge building technologies\n\nSupportive, professional working environment\n\nIf you're a BMS Engineer based in or around London and looking for your next contract, apply now or get in touch for more details

Mobile BMS Service Engineer \n\nCentral London / South East\n\n£45,000 - £55,000 + Benefits\n\nOur client is a market leading building services company and they currently seek an experienced BMS Service Engineer to join their existing team in London.\n\nThis is a field-based service role with responsibility for the service, maintenance, fault finding and occasional commissioning works. Trend, Tridium, Siemens or Struxureware experience would be preferred but training will be provided.\n\nThe location of work would be within the M25 & central London\n\nKEY RESPONSIBILITIES:\n\nTo ensure that maintenance procedures are carried out to the standards detailed in the specific service schedules.\n\nTo fault find on control systems and be able to rectify faults found, on field wiring, electrical panels, GUI's and various BMS controllers.\n\nTo ensure all sites / systems meet the requirements of the customer / client, reporting directly to the Services Delivery Manager via a written report on any sites requiring further attention.\n\nTo produce written reports that clearly detail works undertaken.\n\nAs this is a client facing role you will have excellent communication skills and be able to present yourself in a professional and courteous manner at all times.\n\nThe engineer will be expected to be able to work on one of Trend, Tridium, Siemens or Struxureware Systems from commencement of their employment, training can and will be issued as and where required.\n\nThis is a mobile role working mainly in London and the home counties although will be expected to travel over the south of England as and when required.\n\nThe engineer will be trained on other systems and therefore needs to have the ability and willing to learn new systems

Greenvolt Next is committed to the Distributed Energy Generation, as this is one of the main axes of energy transition and key to reduce the costs of energy bills. We have partnerships across Europe relying on local knowledge and market expertise. We’re looking for an experienced Commissioning Engineer to take ownership of the commissioning process for utility-scale solar projects. You’ll be responsible for managing, executing, and documenting all commissioning activities, ensuring safe, compliant, and efficient grid connection and operation of large-scale renewable energy systems. The role requires strong technical knowledge of HV systems up to 132kV, a solid understanding of protection systems, and hands-on experience delivering grid-connected solar projects. You’ll work closely with project engineers, ICP contractors, and local DNOs to bring each site online safely and on schedule. You will be responsible for the execution of Hot and Cold commissioning, which will include visual inspection, IR testing, wiring continuity /point to point check, CT/VT IR test, ductor test, secondary current injection test and possibly hipot test. Functional operation of switchgear to include interlocking. Requirements Key Responsibilities • Lead and carry out the commissioning of utility-scale solar farms from initial testing through to grid connection and handover., • Manage commissioning plans, schedules, and documentation to ensure full compliance with project and regulatory requirements., • Perform testing and configuration of protection relays, including fault analysis, settings verification, and final approval with the DNO., • LV cold commissioning., • Commission and operate HV and LV switchgear, including the operation of circuit breakers and measurement of CT/VT values., • Execute G99 and G100 testing, ensuring compliance with grid code requirements., • Support and review electrical designs, contributing to design modifications or improvements where required., • Liaise with ICPs, DNOs, and grid operators to coordinate testing and approvals., • Verify the correct operation of SCADA, metering, and communication systems during commissioning., • Maintain accurate commissioning records, settings files, and test reports., • Ensure all work is completed safely and in accordance with company procedures and relevant standards. Required Experience • Proven experience commissioning utility-scale solar PV or large renewable energy projects., • Strong understanding of HV systems up to 132kV, including protection, control, and switching operations., • Experience with grid connection processes and dealing with DNOs and ICPs., • Hands-on experience with protection relay configuration and testing (e.g., Micom, Siemens, ABB, Schneider or similar)., • Solid working knowledge of G99/G100 compliance testing., • Familiar with electrical design principles, single-line diagrams, and grid/electrical studies., • Excellent organisational and communication skills with a practical approach to problem solving. Technical Qualifications • Degree or HND in Electrical or Power Engineering (or equivalent experience)., • Recognised HV operational authorisation (SAP or AP level) desirable., • Certified experience or training in protection relay testing and configuration, • ECS/CSCS and HV/LV authorisations as appropriate for site work., • Full UK driving licence. Benefits • Health Insurance, • Company Pension, • Death in Service, • Income Protection, • Professional Membership fees, • Training and CPD This job description is intended as a general guideline and is not exhaustive; it is a flexible document and may be subject to change to meet the evolving needs of the company. We are an Equal Opportunity Employer and give consideration for employment to qualified applicants without regard to gender, religion, race, national or ethnic origin, cultural background, social group, disability, sexual orientation, gender identity, marital status, age or political opinion. Diversity is fundamental to our culture and we invite you to be part of this diversity! Note this role is based in Ireland and you must be based in Ireland to complete the tasks of this role We want an energy transition for everyone from everyone. Please note: We do not require assistance from recruitment agencies and will not be accepting unsolicited agency submissions for this vacancy.

Veterinary Internal Medicine Clinician 📍 North Yorkshire 💰 Salary of between £60,000 - £140,000 + Benefits Depending on Experience and Qualifications Our client is a purpose-built independent referral centre is seeking a Veterinary Medic to lead and grow its Internal Medicine service. This is a unique opportunity to be the sole Internal Medicine clinician, taking full ownership of the service while working alongside an experienced multidisciplinary referral team. What’s on Offer • Salary between £60,000 - £140,000, • 6 weeks annual leave plus bank holidays, • Company pension scheme with optional salary sacrifice, • Visa sponsorship available, • Flexible working to suit individual needs, • Work alongside experienced specialists across other disciplines within a collaborative referral team, • Independent practice where your voice is valued, • Access to cutting-edge diagnostic and treatment technology The Opportunity This role focuses on developing and leading the Internal Medicine offering within a modern referral environment. As the sole medic on site, you will take clinical ownership of cases while working closely with a Diplomate Soft Tissue Surgeon and wider referral team for collaborative case management. You’ll manage a varied and interesting caseload, with the autonomy to influence the direction, growth, and standards of the service from the outset. Ideal for someone who enjoys high-level clinical work and is motivated by the opportunity to build something of their own within a supportive, independent setting. Applications are welcomed from Certificate Holders, Advanced Practitioners, Residency Trained clinicians, and Diplomates in Small Animal Internal Medicine. The Practice A brand-new, purpose-built independent referral hospital delivering advanced veterinary care across the North of England. Designed to support a high standard of referral medicine, with excellent accessibility and strong transport links for clients and referring practices. The Team Join a highly experienced, growing multidisciplinary team including Diplomates, Advanced Practitioners, and Certificate Holders. Supported by skilled RVNs, patient care assistants, and dedicated support staff, all working within a culture of collaboration, open discussion, and continuous development. Facilities • Siemens 1.5T MRI, • Siemens CT Scanner, • Karl Storz endoscopy and rigid scopes, • Mindray Doppler ultrasound, • Full advanced diagnostic and treatment suite About You • Certificate Holder, Advanced Practitioner, Residency Trained or Diplomate in Small Animal Internal Medicine, • Confident working as a lead clinician within your discipline, • Passion for clinical excellence and internal medicine, • Keen to develop and shape a growing service, • Collaborative and team-oriented, • Forward-thinking with strong clinical ability Interested? Get in touch to learn more or apply confidentially: 📧 Sam@tempus-recruitment.com 📞 01626 249 108

Role Overview: We are seeking a Field Engineer to maintain, troubleshoot, and commission PLC and SCADA systems across water utility assets. You will support treatment works, pumping stations, reservoirs, and associated infrastructure, ensuring reliability of control systems critical to safe water operations. Key Responsibilities: • Maintain, diagnose, and repair PLC control systems, • Support SCADA systems including alarms, HMI screens, and telemetry, • Investigate faults affecting pumps, valves, VFDs, and instrumentation, • Modify PLC logic and control sequences where required, • Commission new equipment, control panels, and automation upgrades, • Maintain industrial communication systems (Modbus, Ethernet/IP, telemetry) Essential Criteria: • Experience with Siemens PLCs, • SCADA experience (Wonderware, Ignition, or WinCC), • Knowledge of Modbus or industrial networks, • Experience with pumps, VFDs, or instrumentation, • Full UK driving licence, • Willingness to travel regionally and participate in standby rota

SMART BUILDINGS BMS ENGINEER (INTEGRATION / IoT FOCUS) £40,000–£80,000 + expenses | Remote Are you a BMS Engineer who enjoys working at the intersection of building systems, data, and modern technology? Do you want to go beyond traditional controls work and play a key role in connecting buildings to the cloud, enabling smarter, more efficient energy performance? This a fast-growing energy-tech business looking for a Smart Buildings BMS Engineer with strong integration and IT awareness to deliver end-to-end projects across commercial buildings. THE ROLE • Carry out site surveys, scope upgrades, and plan smart building integrations, • Install and configure BMS hardware: controllers, sensors, field devices, and panels, • Integrate HVAC, metering, and building systems using BACnet, Modbus, KNX, MQTT, • Connect building systems to cloud platforms via APIs, gateways, and IP networks, • Commission systems including Niagara 4, Trend IQVision, Siemens PX, Distech, • Troubleshoot data flow, connectivity, and system performance issues, • Structure and validate building data to support analytics and optimisation, • Work independently across multiple sites, delivering high-quality technical outcomes WHY JOIN? • Work at the forefront of smart buildings, IoT, and energy optimisation, • Combine hands-on engineering with modern data and integration work, • End-to-end ownership — from survey through to live system performance, • Exposure to cloud platforms, APIs, and advanced building analytics, • Join a high-growth, forward-thinking team shaping the future of building tech, • Clear progression into technical lead / integration specialist roles THE PROFILE • Strong BMS background (installation, commissioning, or integration), • Experience with Tridium Niagara, Trend, Siemens, Distech or similar, • Solid understanding of building protocols (BACnet, Modbus, KNX), • Comfortable working with IP networks, gateways, and system connectivity, • Exposure to MQTT, APIs, JSON, or cloud platforms (AWS or similar) highly desirable, • Electrical background beneficial (NVQ Level 3 / 18th Edition preferred, not essential), • Proactive, organised, and comfortable working independently in a fast-moving environment, • Willing to travel across the UK as required PACKAGE £40,000–£80,000 DOE Remote with UK-wide travel | Full-time or contract Immediate / flexible start Expenses covered

Expert-level PLC/HMI development Siemens TIA PORTAL, experience in delivering machine control software is a must Our client is a leading designer and manufacturer of complex, bespoke automation machinery used across advanced manufacturing sectors. They deliver highly engineered, one‑off automated systems, integrating cutting-edge control technologies, robotics, and precision motion. Due to continued growth and increased project complexity, they are seeking a Principal Software Engineer to lead software delivery across major automation projects. ⭐ Role Overview As the Principal Software Engineer, you will act as the senior technical authority for software across complex automation projects. You will lead software design and implementation, validate Software Design Specifications (SDS), oversee Source Code Reviews (SCRs), and ensure software is delivered to the highest engineering standards. This role is central to successful delivery: you will guide engineers, resolve technical issues, manage task delegation, and ensure best practices are followed from design through commissioning. Key Responsibilities • Lead and oversee all software implementation for major automation projects., • Create, review, and validate Software Design Specifications (SDS) to ensure accuracy and completeness., • Delegate development tasks and maintain oversight of progress, quality, and compliance., • Lead Source Code Reviews (SCRs) across all major software modules., • Drive the software commissioning phase for large/complex systems, integrating software into wider commissioning activities., • Act as the senior engineering authority—troubleshooting, resolving issues, and guiding decision-making., • Mentor, coach, and develop engineers to elevate technical performance standards., • Ensure strict adherence to established development, documentation, and commissioning processes., • Collaborate closely across mechanical, electrical, production, commissioning, and project management functions. Outputs & Deliverables • Software systems delivered on time, to specification, and fully aligned with project standards., • Validated and compliant SCRs, SDS documents, and supporting technical documentation., • Fully commissioned automation systems with complete testing and documentation., • Clear task delegation and consistent technical leadership across software teams., • Occasional on-site support for commissioning, troubleshooting, and customer technical engagement. Required Experience & Skills Essential • Expert experience developing and delivering control software for automated machinery., • Proven leadership delivering major automation software projects end-to-end., • Deep understanding of SDS creation, validation, and project application., • Strong knowledge of automation safety, compliance, and system-level diagnostics., • Experience leading commissioning and supporting escalations on complex systems. Technical Essentials • Expert-level PLC/HMI development across multiple platforms (e.g., Siemens TIA Portal, Rockwell Studio 5000, etc.)., • Strong competence managing commissioning processes and resolving complex issues., • Highly proficient in SCR methodologies and SDS interpretation., • Experience with advanced automation technologies such as robotics, vision systems, and data-driven automation. Desirable • Experience delivering multi‑disciplinary automation projects., • Technical expertise in robotics, vision systems, or motion control tuning., • Familiarity with functional safety standards, compliance frameworks, and software lifecycle management., • Degree in Engineering, Software Engineering, Electrical Engineering, or related field. Collaboration & Reporting Works closely with: Mechanical Engineering, Electrical Engineering, Production & Build, Commissioning, Project Management, and Aftercare/Service Teams.

Control Systems Engineer - Inside IR35 We are seeking an experienced C&I Engineer with a strong systems‑engineering background to support major projects across the energy sector, including power generation, CCGT, utilities, oil & gas, and process industries. This role is ideal for an engineer who thrives in technically demanding environments and has hands‑on experience developing and delivering advanced control system solutions for large‑scale energy assets. The ideal candidate will bring practical expertise in control system architecture, control philosophy, and control narrative development, along with familiarity with leading DCS platforms such as Emerson Ovation, Emerson DeltaV, or Siemens SPPA‑T3000. Key Responsibilities • Develop Control Narratives, Control Philosophy documents, and Functional Logic Specifications for energy‑sector automation systems., • Design robust control system network architectures, including Ethernet/IP, Profinet, Modbus, and redundant industrial networks., • Lead or support system configuration, testing, FAT/SAT, commissioning, and operational optimisation activities., • Interface with OEMs, EPC partners, and multidisciplinary engineering teams on system design, upgrades, migrations, and modernization projects., • Develop and maintain system backup strategies, cybersecurity policies, and ensure compliance with relevant instrumentation and energy‑sector standards., • Prepare high‑quality technical documentation, engineering reports, and change‑management records. Required Experience & Skills • Proven experience in C&I control systems within power plants, CCGT, utilities, oil & gas, or process industries., • Experience working with a major EPC contractor on complex FEED or Detailed Design projects., • Strong understanding of P&IDs, Cause & Effect diagrams, and Control Strategies used in energy and industrial facilities., • Hands‑on knowledge of industrial communication protocols such as Profinet, Modbus TCP/IP, and Ethernet/IP., • Experience with OPC UA for data exchange and system integration., • Familiarity with DCS, ESD, and F&G systems., • Understanding of IEC 62443 cybersecurity principles and their application to critical energy infrastructure.

📍 Mostly customer site-based, across the UK 💼 Full-time 🚗 Travel required 🔧 Junior BMS Commissioning Engineer Start building a career in BMS commissioning This is a great opportunity for someone with strong hands-on site experience, electrical knowledge and a genuine interest in Building Management Systems. You do not need to be the finished article. Some BMS commissioning experience would be highly valued, but the most important thing is that you are comfortable working on-site, understand electrical environments and are keen to develop into a strong commissioning engineer. You will gain exposure to real BMS projects across commercial buildings, schools, retail environments and more complex sites. You will be working alongside experienced engineers who understand how to bring systems online properly and make sure they perform in the real world. What you will be doing You will support the commissioning and delivery of BMS systems across live customer sites. You will be involved in: • Supporting BMS commissioning engineers on-site, • Assisting with point-to-point checks, panel checks and system validation, • Helping bring BMS systems online under supervision, • Working with control panels, field devices, sensors, valves, actuators and HVAC plant, • Supporting functional testing and basic fault finding, • Assisting with documentation, snagging and handover information, • Learning how BMS systems integrate with HVAC, lighting and wider building systems, • Working closely with electricians, project teams, site managers and clients As you develop, you will be given more ownership across commissioning tasks, troubleshooting and system delivery. What you will be working on Projects range from commercial buildings and schools through to more complex environments such as data centres. You will also contribute to work delivered alongside major organisations, including Schneider Electric and Equinix, where performance and reliability are important. This is a hands-on site role, so you should be comfortable travelling to different locations, working with live building systems and learning directly from experienced engineers. Qualifications What they are looking for: This role would suit someone early in their BMS career, or someone from an electrical or on-site engineering background who wants to move further into BMS commissioning. You will likely bring: • Some BMS, controls or commissioning exposure, ideally but not essential, • Strong on-site experience in electrical, HVAC, building services or controls environments, • Good understanding of electrical systems, panels, wiring or field devices, • Confidence using tools and working safely on customer sites, • A willingness to learn BMS platforms, control strategies and commissioning processes, • Good communication skills with engineers, site teams and clients, • A practical, problem-solving mindset Experience with systems such as Trend, Tridium, Siemens, Schneider or Honeywell would be useful, but is not essential. What matters here: • You are reliable, practical and willing to learn, • You are comfortable working on customer sites and dealing with real-world site conditions, • You have strong electrical or hands-on engineering foundations, • You care about doing the job properly, not just getting through a checklist, • You can listen, ask questions and take instruction from senior engineers, • You want to build a long-term career in BMS commissioning Benefits/Additional Info Why this role is worth considering This is a strong opportunity for someone who wants to grow into the BMS space properly. You will get: • Hands-on exposure to real BMS commissioning work, • Training and guidance from experienced engineers, • Experience across a variety of commercial and technical environments, • A pathway into a growing industry driven by energy efficiency, data centres and decarbonisation, • The chance to work for an established business with a strong reputation in the market Location and travel This role is mostly based on customer sites. Projects can be anywhere in the UK, often in and around London and the Home Counties, but not limited to those areas. Candidates should ideally be based within the surrounding Princes Risborough area, or within a realistic 40 to 55 minute commute of the Princes Risborough office. Visits to the Princes Risborough office are only required as and when needed. ⚠️ Practical bits A full UK driving licence and access to a reliable personal vehicle are required for travel between sites. A CSCS card is required. PASMA and IPAF would be useful, but are not essential.

Sector: Energy / Infrastructure Employment Type: Contract IR35 Status: Inside IR35 Location Remote working with occasional travel to office locations including: • Manchester, • London, • Newcastle, • Glasgow Duration & Rate • 6-month rolling contract, • Up to £65.00 per hour (Umbrella) Overview We are seeking an experienced Control & Instrumentation (C&I) Engineer with a strong systems engineering background to support major projects across the energy sector. This includes power generation, CCGT, utilities, oil & gas, and process industries. This role is ideal for an engineer who thrives in technically demanding environments and has hands-on experience delivering advanced control system solutions for large-scale energy assets. The successful candidate will bring strong expertise in control system architecture, control philosophy development, and control narrative preparation, alongside experience working with leading Distributed Control Systems (DCS). Key Responsibilities • Develop Control Narratives, Control Philosophy documents, and Functional Logic Specifications for energy-sector automation systems, • Design robust control system network architectures, including Ethernet/IP, Profinet, Modbus, and redundant industrial networks, • Lead or support system configuration, testing (FAT/SAT), commissioning, and operational optimisation activities, • Interface with OEMs, EPC contractors, and multidisciplinary engineering teams on system design, upgrades, migrations, and modernisation projects, • Develop and maintain system backup strategies and cybersecurity policies, ensuring compliance with relevant instrumentation and energy-sector standards, • Produce high-quality technical documentation, engineering reports, and change management records Required Experience & Skills • Proven experience in C&I control systems within power plants, CCGT, utilities, oil & gas, or process industries, • Experience working with a major EPC contractor on complex FEED or detailed design projects, • Strong understanding of P&IDs, Cause & Effect diagrams, and industrial control strategies, • Hands-on knowledge of industrial communication protocols such as Profinet, Modbus TCP/IP, and Ethernet/IP, • Experience with OPC UA for system integration and data exchange, • Familiarity with DCS, ESD, and F&G systems, • Understanding of IEC 62443 cybersecurity principles and their application in critical infrastructure Desirable Experience • Experience with leading DCS platforms such as Emerson Ovation, Emerson DeltaV, or Siemens SPPA-T3000, • Previous involvement in large-scale infrastructure or energy transition programmes Key Competencies • Strong analytical and problem-solving skills, • Ability to work effectively within multidisciplinary engineering teams, • Excellent communication and stakeholder management skills, • High attention to detail and commitment to engineering quality and safety Summary This is an excellent opportunity to contribute to complex, high-value energy projects supporting critical national infrastructure and the ongoing energy transition. The role offers a flexible working arrangement, exposure to leading-edge technologies, and involvement in major engineering programmes across the UK.

GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo’s, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to...

Senior Control Systems Engineer London Up to 70k A UK-based systems engineering company is looking for experienced Control Systems Engineers to support the delivery of mission-critical control and communication systems across transport and critical infrastructure environments. This is an opportunity to join a growing engineering team working on complex and highly regulated projects involving PLC and SCADA systems. The role would suit engineers who enjoy technically challenging work, problem-solving, and delivering reliable systems within operational environments. Key Responsibilities Control system design and documentation (specifications, drawings, registers) PLC and SCADA software development (Rockwell and Siemens) Hardware configuration and system integration Factory and site testing and commissioning (FAT, SAT, migrations) On-site implementation and technical support Supporting assurance and requirements traceability activities Experience At least 5 years' experience in control systems engineering Experience delivering PLC and/or SCADA projects Strong communication and problem-solving skills A degree in a STEM subject or equivalent industry experience Experience with IEC 62443 or industrial cybersecurity standards...

Control Systems Integration Engineer (London) Great opportunity for a Control Systems Integration Engineer to deliver projects end-to-endfrom design through to commissioningwhile working alongside a skilled engineering team. What youll do: • Deliver full lifecycle control systems projects (design ? commissioning), • Programme and configure PLC, SCADA, and HMI systems, • Attend client meetings, carry out site surveys, and support project delivery, • Work with platforms including Allen Bradley, Siemens, Mitsubishi, Wonderware, Iconics, Schneider, • Produce technical documentation and ensure quality/compliance, • Support UK site commissioning (occasional travel) What you need: • 2+ years control systems experience, • Electrical/Software Engineering qualification (or equivalent), • Experience with PLCs, SCADA, HMI, drives, and instrumentation, • Strong communication skills

Fire Alarm Small Works Engineer London & Home Counties £40,000 - £50,000 + Company Benefits V7 Recruitment are currently working in partnership with a growing and well-established fire & security business who are looking to add an experienced Fire Alarm Small Works Engineer to their team due to continued growth and increased workload across London and the Home Counties. This is an excellent opportunity for an experienced engineer looking to join a reputable company with a strong pipeline of work and opportunities for further training and progression. The Role You will be responsible for carrying out small works installations, upgrades, fault finding and commissioning on a range of fire alarm systems across commercial sites. The successful candidate will be confident working independently, maintaining high engineering standards and delivering excellent customer service on site. Requirements Minimum 5 years’ hands-on experience within the fire alarm industry Strong installation experience across fire alarm systems Good working knowledge of: Advanced Kentec Morley C-TEC Experience with Gent and Siemens panels would be advantageous, however training can be provided Ability to work independently and manage workload effectively Strong communication, admin and customer service skills Full UK driving licencePackage Salary between £40,000 - £50,000 depending on experience Training provided on Gen...

Fire Alarm Engineer Role: We are seeking a skilled and detail-oriented Fire Alarm service Engineer to join our team in London. The ideal candidate will possess a strong background in fire alarm systems and engineering principles, with expertise in system servicing, and inspection. The use of Honeywell Gent and Siemens fire alarm systems. This role requires hands-on experience with fire alarm systems and fittings. The Fire Alarm Service Engineer will work closely with construction teams to ensure compliance with safety regulations and standards. Responsibilities: Implement fire protection systems, including fire alarms systems. Conduct inspections of construction sites to ensure compliance with fire safety codes and regulations. Provide field service support for the installation, maintenance, and repair of fire alarm systems. Collaborate with contractors and clients to assess needs and provide technical guidance on fire safety measures. Perform testing and troubleshooting of sensors, alarms, and other fire protection devices. Use hand tools and power tools effectively during installation and maintenance tasks. Qualifications Proven experience in fire protection engineering or a related field. Strong mechanical knowledge with the ability to work with various hand tools and power tools. Familiarity with construction processes and standards related to fire safety. Experience in alarm system installation...

CNC Setter/Operator This role has the responsibility for supporting with the production of machined parts by setting and operating CNC equipment whilst maintaining quality and safety standards. At SEM, we design and manufacture high performance electrical industrial motors. Established in 1914, we are justifiably proud of our heritage and history. People are at the centre of everything we do and we all share one common goal; to provide the best quality products on time to our customers. Flexible, lean and innovative; we’ve heavily invested in modernising our manufacturing capabilities in pursuit of technical excellence. As a result, we now boast one of the most advanced machine shops in the South East. We’re on a journey of continuous improvement and it’s for that reason that we are looking for talented people that can support us with this. A career with SEM can be hugely rewarding; we will provide you with as much support and guidance as you need, whilst giving you the autonomy to make the role your own. Responsibilities include: Setting up and operating CNC grinders, CNC milling machines and CNC lathes (Siemens, Fanuc, Heidenhain and Traub controls) as per defined tolerance levels Verifying the machine settings by measuring positions, carrying out trial runs and sampling work pieces * Maintaining specifications by observing operations, detecting malfunctions, troubleshooting processes and adhering t...

adi Fire and Security – Fire Systems Small Works Engineer About the Role adi Fire & Security is looking for an experienced Fire Systems Small Works Engineer to join our growing Fire & Life Safety team. This is a hands-on role focused on commissioning, servicing and small works installations across a variety of environments, including heavy industrial, manufacturing and transport sites. You’ll be responsible for the installation, commissioning, servicing and maintenance of fire and life safety systems, working in line with BAFE regulations, company procedures and customer requirements. Specifically, your key responsibilities will include: • Carrying out small works installations of fire alarm and life safety systems, • Installing and commissioning PAVA and Disabled Refuge systems, • Completing planned preventative maintenance and reactive service calls, • Undertaking small-scale commissioning activities and compliance testing, • Producing completion and commissioning documentation to BAFE standards, • Working safely in line with RAMS, H&S policies and customer site rules, • Liaising professionally with customers on site and resolving issues effectively, • Supporting project delivery by meeting KPIs, timelines and quality standards, • Working alongside subcontractors and direct labour when required, • Participating in an on-call rota on agreed dates About you We would like to hear from you if you have: • Proven experience as a Fire Systems Engineer, • Strong background in fire alarm, aspirating, PAVA and Disabled Refuge systems, • Experience on medium-to-large projects within the fire and security industry, • Experience with systems such as Siemens, Gent, Notifier or EMS would be beneficial, • ECS, IPAF, CCNSG, SSTS, SMSTS, IOSH or similar H&S qualifications (beneficial), • Experience working on industrial or hazardous sites The Benefits • The adi Pit Stop – savings and discounts portal with Reward Gateway, • Healthcare cash plan, • 24/7 GP helpline including private electronic prescription service, • Enhanced Employee assistance programme, • Cycle to work scheme, • Employee referral bonus of £500 for every successful new employee, • Generous holiday allowance, • Celebration days, • Company-wide Christmas party for employees and partners, • Annual employee awards, • Long service awards, • Free workwear The company Find out more about adi - _ Other organisations may call this role a Fire Systems Engineer, Fire Alarm Systems Engineer, Fire Safety Systems Engineer, Fire Systems Installation Engineer or Fire Systems Commissioning Engineer. adi Group is fully committed to the principle of equal opportunity in employment and seeks to ensure that the careers of all employees are determined solely on merit and opportunity and that judgement of employees are free from the effects of bias and prejudice. So, if you’re seeking your next challenge as a Fire Systems Small Works Engineer, please apply via the button shown.

Site Electrical Commissioning Engineer – Power Plant Projects 📍 East Yorkshire OR Bedfordshire 💼 Contract role (Outside IR35) 💷 £550 per day via Ltd Co 📅 Start: ASAP | Initial term to 31 October 2026 (extension likely) ⏱ 10 hours/day | 10/4 rotation or 5/2 (Mon–Fri) 🇬🇧 Full UK Working Rights Required The Opportunity We are seeking an experienced Site Electrical Commissioning Engineer to support the delivery of major power plant projects in East Yorkshire or Bedfordshire. This is a long‑term, site‑based commissioning role, suited to someone who thrives in technically demanding environments and enjoys taking ownership of electrical commissioning activities from installation through to handover. You’ll be working closely with project management, engineering, OEMs and site teams to ensure systems are commissioned safely, compliantly and to specification. Key Responsibilities a) Lead and support electrical commissioning activities across power plant systems. b) Collaborate with Project Managers, Engineers and Contractors to develop commissioning plans, schedules and procedures. c) Review design documentation and drawings for compliance with specifications, standards and codes. d) Coordinate and execute functional and performance testing. e) Identify, manage and resolve commissioning issues and defects. f) Produce clear commissioning reports, records and punch lists. g) Provide technical support during installation, testing and recommissioning. h) Work closely with key stakeholders including: • Siemens, • HSE, • Top Administrator, • LoTo Administrator i) Maintain a strong focus on safety, quality and programme delivery. Experience & Knowledge Required • Proven experience in electrical commissioning within power generation or heavy industrial environments., • Strong understanding of powertrain and Balance of Plant (BoP) systems., • Good knowledge of relevant codes, standards and regulations., • Confident diagnosing and resolving complex technical issues., • Strong communication skills with the ability to work across multidisciplinary site teams., • Comfortable managing multiple activities in a fast‑paced site environment., • Competent using commissioning tools, test equipment and software. Qualifications • Bachelor’s degree in Electrical Engineering or related discipline., • Professional Engineering (PE) licence advantageous but not essential., • OSHA certification and strong awareness of HSE and environmental procedures desirable. 📩 Interested? Apply now for further detail

BMS Commissioning Engineer - London My client is an established Building Controls and Integration specialist who are currently looking to take on a BMS Commissioning Engineer to work on a number of projects in London. Role You would be responsible for commissioning and handing over a large BMS project and carry out and document all tasks associated with pre commissioning/ commissioning of a building management system. It is essential that the successful applicant has previous commissioning experience working on either Trend, Tridium, Struxureware or Siemens based Building Management Systems. Key Skills Qualified in Electrical or Electronic Engineering (HNC/ONC, equivalent or higher) Knowledge of the commissioning of building management systems A good understanding of HVAC applications of controls Fluent with building management systems enabling the writing and commissioning of controller/network software. Adaptable approach to workYou will be hardworking and committed to achieving success for both yourself and your company. You will have a flexible approach to your work and be adaptable in new ways of working. This is a long term contract and will also lead onto further contracts...

Senior BMS Commissioning Engineer London & Southeast £50,000 - £70,000 + Car/Allowance + Excellent Benefits An established and growing building controls specialist is looking to appoint an experienced Senior BMS Commissioning Engineer to support a strong pipeline of projects across London and the Southeast. This is an excellent opportunity for a skilled engineer with hands-on commissioning experience across Trend, Tridium, Schneider or Siemens systems to join a highly regarded business delivering large-scale commercial and mixed-use projects. Working closely with Project Managers and the wider commissioning team, you will play a key role in delivering high-quality BMS solutions from commissioning through to final handover. The Role As a Senior BMS Commissioning Engineer, you will be responsible for: • Commissioning BMS systems across commercial and mixed-use projects, • Carrying out testing, validation and functional performance checks, • Ensuring systems are operating in line with project specifications and client requirements, • Configuring, programming and testing Trend, Tridium, Schneider or Siemens systems, • Diagnosing and resolving commissioning issues efficiently on site, • Leading commissioning activities across multiple projects, • Supporting and mentoring junior commissioning engineer...

Fire Alarm Installation Engineer Basic between £40,000 - £45,000 This company is a well-established, NSI Gold accredited Fire and Security firm based in the Essex area seeking a skilled Fire Alarm Engineer to join their Installation department due to growth and contract wins! Package on offer for a Fire Alarm Installation Engineer Basic Salary: £40,000 - £45,000 Travel Paid Minus 1 Hour Each Way 20 Days Holiday + Bank Holidays No Call Out Company Van + Personal Use Overtime Available - x1.3 midweek, x1.5 weekends Responsibilities for a Fire Alarm Installation Engineer Work to relevant British Standards Installation and Small Works across Fire Alarm systems Work across a range of Fire Alarm systems: Advanced, Kentec, C-Tec, Morley. Gent and Siemens experience is beneficial but not essential Maintain a high standard of admin and customer service If you are interested, please do apply to discuss further! Secure and Recruit is a reputable, honest, and longstanding specialist Fire and Security Recruitment company. With an extensive network of the industry's top companies, we ensure that positions we introduce align with candidate expectations. Your preferences and aspirations are of utmost importance, and all details will be thoroughly discussed...

BMS Commissioning Engineer London & South We’re looking for an experienced BMS Commissioning Engineer to deliver smart building projects across London and the South East. You’ll be commissioning advanced BMS systems, ensuring they run at peak performance and meet the highest standards. What You’ll Be Doing Commission and test BMS systems, including HVAC, lighting, and integrations. Configure, program, and validate systems (Trend, Tridium, Schneider, or Siemens). Troubleshoot and resolve technical issues during commissioning. Prepare commissioning documentation and progress reports. Ensure compliance with project specifications, standards, and safety protocols. What We’re Looking For Proven experience commissioning BMS systems (Trend, Tridium, Schneider, or Siemens). BCIA 01, 02 & 03 certifications Strong technical knowledge with excellent troubleshooting skills. Electrical safety awareness training. Organised, detail-driven, and able to work well with clients and contractors. What’s on Offer Competitive salary + full benefits package. Company vehicle (electric or hybrid). Enhanced sick pay, maternity, paternity & family leave policies. Healthcare cash plan & Employee Assistance Programme. * ...

Job Title: Semi-Static BMS Service Engineer Location: Central London (3 days on-site, 2 days mobile) Overview: We are seeking a skilled BMS Service Engineer to join our team in a semi-static role based in Central London. This position offers a balanced working pattern, with three days per week on a prestigious client site and two days supporting additional sites across London or working remotely where applicable. Key Responsibilities: Carry out planned preventative maintenance (PPM) and reactive maintenance on BMS systems Diagnose and repair faults across a range of BMS platforms (e.g. Trend, Tridium, Siemens, Schneider) Perform system upgrades, modifications, and small works Monitor system performance and optimise energy efficiency Liaise with clients on-site, providing technical support and updates Produce detailed service reports and documentation Ensure compliance with health & safety standards Requirements: Proven experience as a BMS Service Engineer Strong knowledge of major BMS systems (Trend, Tridium/Niagara, Siemens, Schneider, etc.) Electrical or controls engineering background Ability to fault-find and work independently Excellent communication and client-facing skills Desirable: Relevant BMS or electrical qualifications ...

We are seeking an experienced Control Systems Engineer to join a well-established and growing team, supporting a strong pipeline of projects across the Food & Beverage and Manufacturing sectors. This role will involve interpreting customer requirements, producing project specifications, and developing and implementing software for control systems solutions. You will be responsible for designing bespoke PLC code and intuitive HMI interfaces, primarily using Siemens and Allen-Bradley/Rockwell platforms. Experience with SQL and SCADA is highly desirable. Key Responsibilities for Control Sytems Engineer Develop custom PLC code from scratch, tailored to project requirements Design user-friendly HMIs for seamless operator interaction Interpret client documentation, such as User Requirement Specifications (URS) and Functional Design Specifications (FDS) Support onsite commissioning and testing at project completion (max 20%) Work collaboratively with the wider project team to deliver high-quality automation solutions Requirements for Control Systems Engineer Minimum of 2 years’ experience in control systems engineering or automation Strong understanding of machine processes and line control Be proficient programming PLC applications from scratch and with various platforms Siemens TIA Portal and/or Rockwell Studio 5000 Knowledge of electrical systems and installations Desir...

Control Systems Engineer Woodford Green up to 70k As a Control Systems Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA, HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar. Essential experience Experience in designing control system's PLC and HMI/SCADA software and making amendments/upgrades to existing system software. Experience in producing project documentation Competence in the programming of PLCs like Siemens, Rockwell, or Mitsubishi PLC's AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms. UK Sites commissioning (which may involve short periods away from home) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience)...

Lead Maintenance Engineer / Engineering Supervisor Step Up Role | FMCG | PPM-Led Site | Mon-Fri | No On-Call Ready to step up and lead - without the stress of a reactive site? This is a brilliant opportunity for a Team Leader / Senior Engineer to move into a hands-on leadership role on a site that's already doing things the right way. No firefighting. No chaos. Just a structured, PPM-driven environment where you can actually lead, improve, and make an impact. The Role: You'll lead from the front - supporting a small engineering team while staying close to the kit across mixing, batching & filling production lines. What you'll be doing: Leading and supporting a team of multi-skilled engineers Driving a proactive maintenance culture (not reactive) Acting as the go-to technical expert (electrical & mechanical) Working with Siemens PLCs (fault finding level) Delivering and driving continuous improvement (CI) Championing health & safety and engineering standardsWhat we're looking for: Current Team Leader / Supervisor OR a strong engineer ready to step up FMCG or similar process background Experience with pipework, mixing or filling systems Strong electrical skills + PLC exposure Someone who can lead, influence and improve - not just maintainWhat's in it for you? Monday-Friday - NO weekends, NO on-call Low breakdown environment = time to actually lead A business that listens and backs its engineers Rea...

Lead Maintenance Engineer / Engineering Supervisor Step Up Role | FMCG | PPM-Led Site | Mon-Fri | No On-Call Ready to step up and lead - without the stress of a reactive site? This is a brilliant opportunity for a Team Leader / Senior Engineer to move into a hands-on leadership role on a site that's already doing things the right way. No firefighting. No chaos. Just a structured, PPM-driven environment where you can actually lead, improve, and make an impact. The Role: You'll lead from the front - supporting a small engineering team while staying close to the kit across mixing, batching & filling production lines. What you'll be doing: • Leading and supporting a team of multi-skilled engineers, • Driving a proactive maintenance culture (not reactive), • Acting as the go-to technical expert (electrical & mechanical), • Working with Siemens PLCs (fault finding level), • Delivering and driving continuous improvement (CI), • Championing health & safety and engineering standardsWhat we're looking for:, • Current Team Leader / Supervisor OR a strong engineer ready to step up, • FMCG or similar process background, • Experience with pipework, mixing or filling systems, • Strong electrical skills + PLC exposure, • Someone who can lead, influence and improve - not just maintain<...

Controls Systems Intergration Engineer- designs, develops, and maintains systems that automate industrial processes, ensuring optimal performance and safety. This is a fantastic opportunity to join our team, as a Controls Systems Intergration Engineer, you will be responsible for the full life cycle delivery of the project in both technical compliance and quality. Attending meetings with clients to discuss the design, surveys, software programming, configuration, testing and commissioning for projects. As a Controls Systems Intergration Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA , HMI, variable speed drives and instrumentation products and experience in producing project documentation. Full-time position: 08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays. Role includes UK site commissioning (which may involve short periods away from home). What we require from you: • Previous control system experience ( 2 years+ ), • Software Engineering Degree and/or Electrical qualifications, • Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms <...

Mobile BMS Service Engineer Central London / South East £45,000 - £55,000 + Benefits Our client is a market leading building services company and they currently seek an experienced BMS Service Engineer to join their existing team in London. This is a field-based service role with responsibility for the service, maintenance, fault finding and occasional commissioning works. Trend, Tridium, Siemens or Struxureware experience would be preferred but training will be provided. The location of work would be within the M25 & central London KEY RESPONSIBILITIES: To ensure that maintenance procedures are carried out to the standards detailed in the specific service schedules. To fault find on control systems and be able to rectify faults found, on field wiring, electrical panels, GUI's and various BMS controllers. To ensure all sites / systems meet the requirements of the customer / client, reporting directly to the Services Delivery Manager via a written report on any sites requiring further attention. To produce written reports that clearly detail works undertaken. As this is a client facing role you will have excellent communication skills and be able to present yourself in a professional and courteous manner at all times. The engineer will be expected to be able to work on one of Trend, Tridium, Siemens or Struxureware Systems from commencement of their employment, training can and will be issued as and where required. This is a mobile role working mainly in London and the home counties although will be expected to travel over the south of England as and when required. The engineer will be trained on other systems and therefore needs to have the ability and willing to learn new systems. #J-18808-Ljbffr

The Anthro JV – a joint venture between Egis and VVB Engineering – will provide comprehensive turn-key services for London’s state-of-the-art HS2 gateway station at Old Oak Common. We have been awarded a multi-year contract to deliver MEPHFC (Mechanical, Electrical, Public Health, Fire and Communications) systems works. The Anthro joint venture supports delivery of the Mechanical Work Package at Old Oak Common Station. The project involves collaboration with the Delivery Manager, project team, 3rd party design consultants, main contractor, Siemens SBS, and 3rd party installation contractors to safely deliver the project on time, to stated quality, at minimum cost and to client satisfaction. Projects rely on accurate technical delivery. Gaps between design and installation can lead to delays, rework, and performance issues. A capable Engineer helps ensure systems are delivered correctly, supporting smooth commissioning, reliable operation, and long-term building performance. • Assist Delivery Manager to deliver the project to meet cost, time, and quality requirements., • Review designs, specifications, and control strategies in line with current project applicable HS2, NR, BS, EN and ISO standards and to ensure buildability and constructability., • Assist with procurement of mechanical, public health, fire, electrical and BEMS equipment to ensure compatibility with selected equipment, including liaising with manufacturers., • Identify weaknesses or errors in the design that could jeopardise functionality., • Review drawings, 3D models and documentation., • Coordinate site installation while ensuring HSE best practices are followed., • Coordinate technical queries throughout design, installation and commissioning., • Support testing, commissioning, and system validation., • Support the Assurance team as required to comply with HS2 and BBVS procedures., • Assist with handover documentation and client training., • Mentor and support junior staff, contributing to continuous team development and technical excellence., • Strong knowledge of building services, mechanical and public health plant, and HVAC systems integration., • Demonstrable skills in design and commissioning., • Full understanding of schematics and drawings., • Understanding of industry best practice., • Minimum HNC or equivalent qualification in Mechanical Engineering (or equivalent). By joining us, you’ll be part of a multi-disciplinary team delivering innovative engineering solutions for one of Europe’s largest infrastructure projects. We offer: • A collaborative and dynamic work environment., • The chance to work on a high-profile, state-of-the-art project., • Career development and opportunities to grow with the business. #J-18808-Ljbffr

• £60,000 - £70,000 DOE, • Company Car / Car Allowance, • 10% Pension Contribution, • Private Healthcare, • Annual Bonus Scheme, • Overtime Available, • 25 Days Holiday + Bank Holidays, • Ongoing Training & Career Development An established and respected smart buildings and controls specialist delivering innovative Building Management System (BMS) solutions across commercial, healthcare, education, pharmaceutical, and critical environment projects throughout London and the South East. The successful candidate will be responsible for the commissioning, testing, and optimisation of BMS systems across a range of projects. You will work closely with project managers, engineers, subcontractors, and clients to ensure systems are delivered to specification, on time, and to the highest standards. • Commission BMS systems including HVAC controls, plant interfaces, and energy management systems, • Carry out point‑to‑point checks, functional testing, and system validation, • Diagnose and resolve software, networking, and control issues, • Modify and optimise BMS software and graphics where required, • Ensure all systems operate in accordance with design specifications and client requirements, • Produce commissioning documentation, test sheets, and O&M information, • Attend client meetings, site inspections, and progress reviews, • Support project handovers and provide client training where necessary, • Work collaboratively with installation engineers and project teams, • Ensure compliance with health & safety standards and site regulations, • Proven experience as a BMS Commissioning Engineer, • Strong knowledge of BMS platforms such as Trend, Tridium, Siemens, Schneider, Honeywell, or Delta, • Good understanding of HVAC systems and controls, • Ability to read and interpret technical drawings and schematics, • Strong fault‑finding and problem‑solving skills, • Experience commissioning large commercial or critical environment projects, • Excellent communication and client‑facing skills, • Full UK Driving Licence, • Experience with data centres, pharmaceutical, or mission‑critical projects, • Electrical qualifications or controls‑related certifications, • Knowledge of IP networking and integration protocols such as BACnet or Modbus, • Excellent salary and benefits package, • Opportunity to work on prestigious London projects, • Long‑term career progression opportunities, • Supportive and technically strong engineering team, • Stable and growing business with strong industry reputation #J-18808-Ljbffr