Support engineer jobs in BordonCreate job alerts

Key Responsibilities • Identify areas for recommended plant improvement and develop project work scopes and schedules for the Engineering Department.• Design and implement new process control systems and safety systems as part of capital projects.• Monitor CAPEX & OPEX budgets with respect to C&I activities, to ensure that they are performing effectively and cost effectively.• Take financial responsibility for small single function C&I Projects.• Act as Lead Engineer for site functional safety, development, maintenance, and support.• Review Safety Instrumented Systems, documentation and improve process control systems and safety systems to ensure compliance with international standards, including monitoring and reviewing records for proof tests carried out by maintenance personnel.• Produce key deliverables such as SIL verification documents, Safety Requirement Specifications and produce SIL verification calculations using SIL calculation software.• Specify, Test and Commission SIS and Control Systems upgrades.• Ensure instrumentation hazardous area design and installation is carried out in accordance with industry regulations.• Provide technical support to operations, including, diagnosis, root cause analysis, and implementation of remedial work required to ensure control system availability and integrity.• Provide technical support for the maintenance of site wide process control systems and safety systems. This includes all communications between sites, vendor equipment and remote access support.• Provide leadership, direction, and supervision to C&I Technicians.• Ensure that all documentation and certification is in place for the installed facilities and that they fully comply with the statutory legislative and regulatory requirements with respect to the C&I discipline.• Ensure upgrades to the Safety Management System associated with Control & Instrumentation are applicable and in line with any legislation change.Qualifications & Experience • 4–5 years’ relevant maintenance experience., • Apprenticeship or NVQ Level 3 in instrumentation (with electrical knowledge)., • Understanding of oil & gas industry operations., • Able to work independently and take responsibility for tasks.

Competitive Salary + Great benefitsAlton, HampshireAs an Asset Support Engineer, you will be responsible for:• Maintain and ensure accuracy of the Enterprise Asset Management (EAM) system, including asset registers, hierarchies, categories, and criticality data• Ensure preventative maintenance (PM) and corrective maintenance (CM) work orders are correctly scheduled, prioritised, and closed within the EAM system• Coordinate with Operations, Maintenance, and Engineering teams to track asset status before and after maintenance or inspection activities.• Work with procurement and stock control to link spare parts and tools to maintenance plans and ensure sufficient inventory for planned maintenance.• Assist in maintenance shutdown planning and budgeting, including providing cost/pricing data to support short- and long-term asset management planning.• Review and optimise work order programmes, including tasks, labour hours, and assigned disciplines to improve maintenance efficiency.To be considered for this role you should have:• Strong knowledge of mechanical and electrical equipment and systems• Experience working with industrial plant equipment such as instrumentation, motors, switchgear, valves, compressors and pumps• Practical experience using CMMS/EAM system from a user, supervisory or implementation perspective• An understanding of asset management and management of change systems used in the oil & gas or energy industryWhat's on offer:• A competitive salary• 25 Days holiday• STIP Potential of 15% salary based on completion of individual targets and the company performance• Group life assurance 8x salary• £600/year Gym allowance• Pension 10% company contribution• Hours: Monday – Friday 09:00-17:00

Asset Support Engineer (Oil & Gas) Alton, Hampshire £45,000 - £55,000 + Private Medical + STIP Bonus + Progression + Training + Enhanced Pension Contribution + Company Benefits Do you have experience in Enterprise Asset Management systems (EAM) from an Industrial or Energy Industry looking to join an established Gas Storage company offering training on their new system (Hexagon), succession planning and an incentive plan bonus to boost your earnings? This long-standing company, located on Oil field, produces natural Gas and Oil from its facilities since the discovery in the early 80s and has since developed their Gas storage facilities. They have experienced consistent growth and due to the installation of their new EAM system, they are now looking for someone to support their Asset Manager. You will be responsible for ensuring the reliability and performance of critical equipment by supporting the day-to-day use of the company's new EAM system. You will work closely with operations, maintenance, and engineering teams to manage asset data, track work orders, and optimize maintenance strategies. Daily activities include troubleshooting system issues, maintaining accurate asset records and analysing data to improve asset performance and reduce downtime This role would suit someone with Enterprise Asset Management systems experience from the Industrial or Energy industry looking to join a company offering long term training and progression. The Role: • Using the new EAM system to supporting Asset Management, • Liaise with operation departments on maintenance scheduling, • Contributing ideas for new upgrades, mods and Asset strategies, • Monday-Friday (9am-5pm), • EAM Systems experience, • Industrial Plant Equipment experience Reference number: BBBH24949 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Background Prismatic is a technology development company, specialising in the design, manufacture and delivery of innovative, high value aerospace products and systems. Prismatic is a subsidiary of BAE systems, led by a technically and commercially focused team based in Alton, Hampshire. Our cutting-edge systems (such as the high-altitude PHASA-35) have clear commercial value, are developed at pace and address critical customer needs. Overview As Thermal Systems Integration Engineer, you will be responsible for guiding the design, analysis, integration, and verification of thermal control and management systems for flight platforms. You will lead thermal engineering efforts across the vehicle to ensure all subsystems operate within temperature limits, contribute to multidisciplinary system design, and support test and flight readiness activities. Tasks and Accountabilities Thermal System Design & Analysis • Lead the architecture and detailed design of thermal control systems to manage heat loads from electronics, power systems, propulsion, and environmental conditions., • Perform and oversee thermal analysis (steady‑state, transient, orbital/altitude environment) using both analytical and simulation tools., • Define thermal requirements and translate them into subsystem and component specifications. Integration & Cross‑Functional Collaboration • Coordinate closely with structures, propulsion, power, avionics, and systems engineering teams to ensure thermal considerations are integrated early and effectively., • Identify and manage thermal interfaces between subsystems and negotiate solutions that meet vehicle performance and safety objectives. Verification & Testing • Lead the development of test plans, thermal test campaigns, and validation efforts from component level through to system and environmental tests., • Analyse test data, drive corrective actions, and update thermal models based on empirical results. Leadership & Mentoring • Provide technical leadership and guidance to thermal engineers and analysts., • Support project planning, task allocation, milestone tracking, risk identification and mitigation, and technical reviews with stakeholders. Documentation & Communication • Produce clear technical documentation: design reports, analysis results, trade studies, test reports, and presentations for internal and customer reviews., • Act as the primary thermal authority within the flight systems team for internal and external queries., • Design and implement processes and procedures as required Requirements Bachelor’s or master’s degree in aerospace, Mechanical, or related Engineering. • Proven expertise in thermal systems design and analysis, including heat transfer (conduction, convection, radiation) and thermal control for flight environments., • Experience leading thermal engineering efforts on complex aerospace projects (aircraft, spacecraft, UAVs)., • Strong knowledge of thermal simulation tools (e.g., Thermal Desktop, SINDA, FE/CFD tools) and experience validating models with test data., • Excellent communication skills with the ability to articulate technical trade-offs to multidisciplinary teams. Desirable • Experience working on high‑altitude or space‑flight vehicles., • Familiarity with thermal vacuum testing, flight qualification standards, and thermal materials., • Prior leadership or project management experience in engineering environments. What We Offer We’re proud to offer a competitive package and a range of benefits designed to support your career and wellbeing, including: • Location: Alton (Hampshire), UK., • Contract: Permanent, 37.5 hours per week (excluding breaks). Hybrid working (where applicable), giving you the flexibility to balance time between home and our offices (norm is 3 days a week)., • Salary: Competitive – dependent on experience., • Bonus: Non contractual company performance related bonus., • Pension: 10% company contribution, plus salary exchange options for AVCs., • Green Benefits: Access to our Green Car/EV scheme via salary exchange., • Annual Leave: 25 days plus bank holidays (rising to 28 days after 3 years’ service)., • Employee Schemes: Eligibility for the BAE Systems Share Incentive Scheme, Company Performance Free Share awards, Cycle to Work scheme, and a Halfords Trade Discount Card., • Community & Culture: Social and employee engagement activities through our Prismatic Pulse group., • Wellbeing: Access to Occupational Health support, including an Employee Assistance Programme (EAP). How to Apply To apply, please send your CV and a covering email to . In your application, please confirm: • That you have the right to work in the UK and can commute to the job’s location of work., • That you have been a UK resident for at least 5 years and can meet any required background checks (or security clearance requirements where applicable)., • Your salary expectations for the role., • Your availability or current notice period. Proud to Support the Armed Forces Community We are proud signatories of the Armed Forces Covenant and holders of the Bronze Award, demonstrating our commitment to supporting those who serve and have served. We recognise that the discipline, teamwork, problem-solving skills, and resilience gained through military life are a huge asset to our organisation. That’s why we actively encourage applications from veterans, reservists, and the partners and families of those serving. If you’ve served in any capacity, or supported someone who has, we’d love to hear from you.

Prismatic is a technology development company, specialising in the design, manufacture and delivery of innovative, high value aerospace products and systems. Prismatic is a subsidiary of BAE systems, led by a technically and commercially focused team. Our cutting-edge systems (such as the high-altitude PHASA-35) have clear commercial value, are developed at pace and address critical customer needs. Tasks and Accountabilities • Support test flight trials inside and outside of UK, specifically preparing avionics for flight., • Candidates must have a practical avionics / electronics engineering background with an ability to work as a team member as well as occasionally unsupervised on own initiative, have good analytical skills, with the ability to identify a problem, interact with the right stakeholders and provide a solution. The candidate may be expected to contribute to work packages and present results to managers and peers., • Contribute to the generation of test plans, organising and presenting at test readiness review boards., • Support qualification and acceptance testing, recording/analysing results, presenting at test review boards and generating end item data packs., • Carry out analysis tasks from flight data., • Work with Lead System Engineer to ensure flight readiness., • Run test procedures, collect data, and write up technical reports., • Provide input into design from a Flight Ground maintenance perspective., • Support quality and product assurance., • Support internal, external, and customer audit activities., • Over signing other team members work when conducting maintenance and manufacturing tasks., • Engage with customers and key stakeholders. Requirements Essential Requirements • Practical background in avionics or electronics engineering, ideally within aerospace or a related high-reliability industry., • Hands-on experience with installation, troubleshooting, testing, and maintenance of avionics systems., • Ability to work effectively as part of a multidisciplinary team, as well as independently when required., • Strong analytical and problem-solving skills, with the ability to identify issues, engage the right stakeholders, and provide solutions., • Experience contributing to and executing test procedures, including data collection, analysis, and technical reporting., • Familiarity with qualification and acceptance testing, generating documentation, and presenting at review boards., • Willingness and flexibility to support flight trials in the UK and overseas, sometimes at short notice., • Understanding of flight readiness activities and avionics ground support requirements., • Knowledge of quality and product assurance practices, with a commitment to safety and compliance., • Clear and confident communication skills, comfortable presenting to managers, peers, and external stakeholders. Desirable Requirements • Experience working on prototype, research, or experimental aircraft programmes., • Knowledge of aerospace regulatory requirements, flight test operations, and avionics maintenance standards., • Familiarity with test readiness review processes, end-item data packs, and audit compliance., • Experience analysing flight data and contributing to system-level improvements., • Ability to provide design feedback from a ground maintenance and operational perspective. Personal Attributes • Safety-focused and detail-oriented with a high standard of workmanship., • Proactive, adaptable, and comfortable working in a fast-paced and evolving environment., • Strong team player who also shows initiative when working independently., • Professional and collaborative approach when engaging with customers, auditors, and key stakeholders. What We Offer We’re proud to offer a competitive package and a range of benefits designed to support your career and wellbeing, including: • Location: Alton (Hampshire), UK., • Contract: Permanent, 37.5 hours per week (excluding breaks). Hybrid working (where applicable), giving you the flexibility to balance time between home and our offices (norm is 4 days a week with Friday WFH)., • Salary: Competitive – dependent on experience., • Bonus: Non contractual company performance related bonus., • Pension: 10% company contribution, plus salary exchange options for AVCs., • Green Benefits: Access to our Green Car/EV scheme via salary exchange., • Annual Leave: 25 days plus bank holidays (rising to 28 days after 3 years’ service)., • Employee Schemes: Eligibility for the BAE Systems Share Incentive Scheme, Company Performance Free Share awards, Cycle to Work scheme, and a Halfords Trade Discount Card., • Community & Culture: Social and employee engagement activities through our Prismatic Pulse group., • Wellbeing: Access to Occupational Health support, including an Employee Assistance Programme (EAP). How to Apply To apply, please send your CV and a covering email via LinkedIn. In your application, please confirm: • That you have the right to work in the UK and can commute to the location of work., • That you have been a UK resident for at least 5 years and can meet any required background checks (or security clearance requirements where applicable)., • Your salary expectations for the role., • Your availability or current notice period. Proud to Support the Armed Forces Community We know that the discipline, teamwork, problem-solving skills, and resilience gained through military life are a huge asset to our organisation. That’s why we encourage applications from veterans, reservists, and the partners and families of those serving. If you’ve served in any capacity, or supported someone who has, we’d love to hear from you. We Hire Direct – No Agency Submissions or Enquiries, Please.

We are partnered with a well‑established global manufacturing company based in Alton, who are looking to recruit a Project Engineer to support New Unit and Retrofit projects across the Power Generation, Oil & Gas, and Marine markets. This is a fully on‑site role, 5 days per week, working full‑time hours Monday to Friday. The Project Engineer will be responsible for delivering fully compliant engineering and manufacturing packages from technical proposal through to fabrication and customer documentation. Working closely with a Senior Engineer, Project Managers, and cross‑functional teams, the role supports schedule, cost, quality, and safety targets while acting as the technical interface with customers, suppliers, and internal stakeholders. Responsibilities include design review and approval, managing internal and external design resources, producing BOMs and datasheets within ERP systems, supporting fabrication, resolving technical queries and concessions, contributing to standardisation initiatives, and producing Installation, Operation & Maintenance (IOM) manuals. Experience: • Engineering degree or equivalent professional engineering experience, • Proven experience reviewing 3D models and 2D drawings for design‑for‑manufacture (DFM), including access, weldability, clash detection, coatings, and drains, • Awareness of international engineering standards, regulatory requirements, and export controls, • Experience working with CAD tools and ERP systems in a manufacturing environment, • Ability to manage multiple projects, interface with suppliers and sub‑contract designers, and support delivery to cost and schedule targets

This role plays a key part in ensuring the effective operation of the companys asset management system and maintenance strategy, supporting operations, engineering and maintenance teams to optimise asset performance and reliability.

Asset Support Engineer (Oil & Gas).

Job Title: Electrical Maintenance Technician All candidates should make sure to read the following job description and information carefully before applying. Full time, Permanent Shifts: Monday - Friday ReeVR Talent are looking for an Electrical Maintenance Technician to provide support and the safe operation and maintenance of equipment within our clients process plant environment. The role involves carrying out both routine and reactive maintenance activities to ensure plant reliability and efficiency. Key Responsibilities for the Electrical Maintenance Technician • Perform routine and non-routine maintenance, inspections and electrical repairs, • Diagnose faults and carry out corrective actions to minimise downtime., • Maintain and service process control systems., • Ensure all maintenance activities are recorded accurately and completed in line with safety procedures., • Support plant operations by responding to breakdowns and assisting with troubleshooting when required., • Assist with installation, testing, and commissioning of new equipment and upgrades., • Carry out equipment isolations to ensure safe maintenance practices., • Work collaboratively with other technicians, engineers to maintain site performance., • Maintain high standards of housekeeping to ensure a safe and efficient working environment., • Proven experience in electrical maintenance within a process plant or similar industrial environment., • NVQ Level 3 or apprenticeship in an Electrical discipline., • Strong fault-finding and problem-solving skills., • Ability to work independently or as part of a team with minimal supervision., • Good understanding of electrical systems, • Ability to plan and prioritise workload effectively., • Strong communication skills across all levels., • Proactive and reliable approach to work. xrnqpay Apply today, or to find out more please contact Abby Maslin @ ReeVR Talent

Asset Support Engineer (Oil & Gas).Private Medical + STIP Bonus + Progression + Training + Enhanced Pension Contribution + Company Benefits.Do you have experience in Enterprise Asset Management systems (EAM) from an Industrial or Energy Industry looking to join an established Gas Storage company

Asset Support Engineer An established and growing organisation within the energy sector is seeking an Asset Support Engineer to join their Asset Management team. This role plays a key part in ensuring the effective operation of the companys asset management system and maintenance strategy, supporting operations, engineering and maintenance teams to optimise asset performance and reliability. Are you the right applicant for this opportunity Find out by reading through the role overview below. This is an excellent opportunity for someone with experience working with CMMS/EAM systems and industrial plant equipment who enjoys combining technical engineering knowledge with data-driven asset management. The Role You will support the Asset Management function by maintaining and optimising the organisations Enterprise Asset Management (EAM) system, ensuring maintenance strategies are accurately reflected, assets are properly documented, and operational teams have the information they need to maintain high levels of reliability and performance. Working closely with operations, maintenance and engineering teams, you will help ensure maintenance activities are correctly planned, tracked and continuously improved. Key ResponsibilitiesAsset Management & System Support • Maintain and optimise the Enterprise Asset Management (EAM) system, ensuring accurate asset data and effective maintenance planning., • Ensure preventative and corrective maintenance activities are correctly scheduled, prioritised and recorded., • Maintain accurate asset registers, including equipment hierarchies, classifications and criticality assessments., • Support updates to maintenance strategies and asset lifecycle information in collaboration with technical specialists and suppliers., • Manage additions and modifications to asset records and maintenance plans in line with change management procedures., • Identify and resolve inefficiencies within existing EAM system rules, configurations and workflows.Maintenance Strategy & Reliability, • Support the development and continuous improvement of maintenance strategies aligned with asset criticality and operational objectives., • Work with engineering and operations teams to improve maintenance planning and task efficiency., • Assist with planning and coordination of planned maintenance shutdowns., • Conduct site inspections and audits to ensure maintenance activities meet required standards.Data Analysis & Reporting, • Develop and maintain reports, dashboards and KPIs to monitor asset performance., • Analyse asset and maintenance data to identify improvement opportunities and support strategic decisions., • Provide clear reporting and insights to internal stakeholders to support asset management planning.Cross-Functional Collaboration, • Work closely with maintenance, engineering, procurement and operations teams., • Ensure spare parts and required tooling are aligned with preventative maintenance plans., • Support budgeting and forecasting activities through asset lifecycle and cost data.About You, • HNC (or equivalent) in Engineering or working towards a recognised engineering qualification., • Experience working with CMMS/EAM systems in an industrial or energy environment., • Good understanding of mechanical and electrical plant equipment such as pumps, motors, valves, compressors, switchgear or instrumentation., • Knowledge of asset management principles and maintenance strategies within industrial environments., • Strong analytical skills with experience working with asset data and large datasets.Desirable Skills, • Experience within energy, utilities, oil & gas, or heavy industrial sectors., • Familiarity with asset management standards and reliability methodologies., • Experience using data and reporting tools such as Excel, Power BI, SQL or similar.Personal Skills, • Strong communication and collaboration skills., • High attention to detail and commitment to data accuracy., • Well organised and able to manage multiple priorities.

A successful manufacturing company is seeking a Field Service Engineer for their Bordon office. The Engineer will divide their time between customer sites and office-based tasks, ensuring high-quality customer service and support. A background in mechanical and electrical engineering is essential.

Fire Extinguisher Service Technician – Portable Extinguishers Perks: Commission on completed works, overtime pay, life assurance, pension, referral bonuses Location: London Salary: £28,000 per annum OTE: Up to £40,000 Industry: Fire Safety / Mechanical Fire Protection About Are you experienced in fire extinguisher servicing and passionate about fire safety? This role offers the opportunity to join a respected fire protection business, delivering high-quality installation, servicing, and maintenance of portable fire extinguishers in line with current British Standards. Working across Yorkshire, you’ll have the tools, training, and support to excel in your role, alongside a strong earning potential through commission and overtime. Benefits – What’s in it for you: Basic salary: £28,000 per annum OTE: Up to £40,000 (4% commission on all completed works) Overtime & paid time off Paid holidays plus bank holidays Development and career progression opportunities Responsibilities – What you’ll be doing: As a Fire Extinguisher Service Technician, your role will include: Installing, servicing, and maintaining portable fire extinguishers to British Standards Planning and completing call visits efficiently in your region Building and maintaining professional client relationships Conducting scheduled and reactive maintenance in a timely manner Communicating effectively with customers and service administrators Managing vehicle stock, tools, and equipment securely Conducting site surveys for fire equipment and signage Completing training and duties professionally Occasional travel and overnight stays during training and busy periods Requirements – What we’re looking for: Experience in fire extinguisher servicing with relevant qualification Knowledge of BS5306 parts 3 and 8 BAFE / FETA qualification or equivalent with refresher training every three years Mechanical fire industry background Proven customer service skills Ability to work unsupervised and problem-solve IT literacy (email, Word, Excel, PDA/iPad/smartphone use) Basic maths skills (including fire rating calculations) Ability to create quotes and recommendations for customers Full UK driving licence Experience in other Mechanical Fire Systems (advantageous) Why Join? This is your chance to join a well-regarded fire protection business that values its team, rewards performance, and offers a healthy work-life balance. With clear progression opportunities and a strong support network, you’ll have everything you need to succeed and grow. Apply Now! If you're an experienced Fire Extinguisher Service Technician based in or near London, this is your chance to join a respected company offering real work-life balance, strong earning potential, and professional development. Keywords to support your application: Fire Extinguisher Technician, Fire Extinguisher Engineer, Portable Fire Extinguishers, Fire Protection Engineer, BAFE Qualified, FETA Qualified, BS5306, Fire Equipment Maintenance, Fire Safety Jobs Yorkshire, Fire Service Technician

Senior Refrigeration & Air Conditioning Engineer £45,000 - £55,000 + Overtime + Bonus (OTE £65k+) Hampshire (within 50-mile radius) I'm currently recruiting on behalf of a well-established and growing company for a Senior Refrigeration & Air Conditioning Engineer. This is a key position within the business, ideal for an experienced engineer looking to step into a more senior role with added responsibility, influence, and long-term progression. The Role You'll be the go-to engineer on site-handling complex faults, supporting junior engineers, and ensuring high standards across service and maintenance work. Service, maintenance & fault finding on commercial refrigeration & AC systems Diagnose and resolve complex technical issues Support and mentor junior engineers Assist with commissioning and system optimisation Work independently across customer sites Participate in a 1-in-7 call-out rota Use Simpro system for job management and reporting What They're Looking For F-Gas Category 1 Strong background in commercial refrigeration & air conditioning Proven experience handling complex faults and large systems Full UK driving licence Strong communication and customer-facing skills Ability to lead by example and support junior engineers Based in or around Hampshire Desirable (Not Essential) CO₂ experience Commissioning experience Experience with Dixell XWeb / monitoring systems Previous mentoring or supervisory experience What's On Offer Door-to-door pay Overtime @ 1.5x (Mon-Sat) & 2x Sundays 45-hour contract 1 in 7 call-out rota Company van + fuel card Phone, tablet & specialist tools 25 days holiday + bank holidays Performance-related bonus Ongoing training & progression into supervisory rolesReference: INDAV Interested? Apply today to be considered for this exciting Alton based opportunity. Alecto Recruitment Limited is acting as an employment business for this vacancy. Due to high application volumes, only shortlisted candidates will be contacted. Keywords: Air Conditioning Engineer, HVAC Engineer, Air Conditioning Technician, HVAC Technician, Installation, Maintenance, VRV, VRF, Split Systems

Job Title: Electrical Maintenance Technician Full time, Permanent Shifts: Monday - Friday ReeVR Talent are looking for an Electrical Maintenance Technician to provide support and the safe operation and maintenance of equipment within our clients process plant environment. The role involves carrying out both routine and reactive maintenance activities to ensure plant reliability and efficiency. Key Responsibilities for the Electrical Maintenance Technician Perform routine and non-routine maintenance, inspections and electrical repairs Diagnose faults and carry out corrective actions to minimise downtime. Maintain and service process control systems. Ensure all maintenance activities are recorded accurately and completed in line with safety procedures. Support plant operations by responding to breakdowns and assisting with troubleshooting when required. Assist with installation, testing, and commissioning of new equipment and upgrades. Carry out equipment isolations to ensure safe maintenance practices. Work collaboratively with other technicians, engineers to maintain site performance. Maintain high standards of housekeeping to ensure a safe and efficient working environment. The Electrical Maintenance Technician may also be required to support out-of-hours call-outs where necessary. Skills & Experience required for the Electrical Maintenance Engineer Proven experience in electrical maintenance within a process plant or similar industrial environment. NVQ Level 3 or apprenticeship in an Electrical discipline. Strong fault-finding and problem-solving skills. Ability to work independently or as part of a team with minimal supervision. Good understanding of electrical systems IT literate with the ability to complete maintenance records and reports. Key Competencies Ability to plan and prioritise workload effectively. Strong communication skills across all levels. Proactive and reliable approach to work. Ability to perform well under pressure. Our client offers a fantastic benefits package, that we would love to share with you! Apply today, or to find out more please contact Abby Maslin @ ReeVR Talent TPBN1_UKTJ

Field Service Engineer (Maintenance) Bordon, Hampshire £35,000 to £45,000 DOE + Overtime (Approx. £5,000 to £10,000) + Door to Door Travel + Travel Insurance + Company Van + Workwear + Laptop + Pension + Excellent Training Monday to Thursday 08:00 to 17:00, Friday 08:00 to 14:30 Field Service Engineer is required for a successful manufacturing company offering excellent training and technical development within a growing team. The Service Engineer role will suit candidates from any technical background who have electrical and mechanical experience. Candidates from any maintenance or field-based roles, military backgrounds and commercial electrical backgrounds are encouraged to apply. Full manufacturing training will be provided. The Service Engineer will spend approximately 50% of your time at customer sites where you will be responsible for servicing, maintaining and installing equipment. You will work mainly work at client sites across the UK with occasional international travel. The other 50% of your time be spent working from the company’s office in Bordon, where you still support the management of customer relationships which will involve answering queries, order spart parts etc. The Service Engineer Role: · 50% office based, 50% service · Servicing, maintenance and installation of equipment · Full in-house training provided The Service Engineer Candidate: · From any technical/engineering background · Mechanical and electrical knowledge

Service Engineer (Maintenance) Bordon, Hampshire £35,000 to £45,000 DOE + Overtime (Approx. £5,000 to £10,000) + Door to Door Travel + Travel Insurance + Company Van + Workwear + Laptop + Pension + Excellent Training Monday to Thursday 08:00 to 17:00, Friday 08:00 to 14:30 Field Service Engineer is required for a successful manufacturing company offering excellent training and technical development within a growing team. The Service Engineer role will suit candidates from any technical background who have electrical and mechanical experience. Candidates from any maintenance or field-based roles, military backgrounds and commercial electrical backgrounds are encouraged to apply. Full manufacturing training will be provided. The Service Engineer will spend approximately 50% of your time at customer sites where you will be responsible for servicing, maintaining and installing equipment. You will work mainly work at client sitess across the UK with occasional international travel. The other 50% of your time be spent working from the company’s office in Bordon, where you still support the management of customer relationships which will involve answering queries, order spart parts etc. The Service Engineer Role: · 50% office based, 50% service · Servicing, maintenance and installation of equipment · Full in-house training provided The Service Engineer Candidate: · From any technical/engineering background · Mechanical and electrical knowledge

Process Control / Instrumentation Technician (Oil & Gas) Alton, Hampshire £50,000-£60,000 + Company Bonus + Private Medical + Overtime + On call (optional) + Progression + Enhanced Pension Contribution + Company Benefits Are you a Process Control / Instrumentation Technician, or similar, seeking an autonomous and varied role within a well-established company that offers the opportunity to boost your earnings through bonus and overtime, develop your skills through specialist training to progress to Lead Technician or Management? This long-standing company provides Gas Storage services from a fast-paced, large-scale site in the Southeast of the UK. Since their beginnings in the 1980s, they have experienced consistent growth and due to an increasing workload, they are now looking to expand their close-knit and friendly team. This is a varied role where no two days are the same. You will be primarily responsible for carrying out checks and inspections to ensure compliance and safety processes are adhered to as you work within a tight knit team in addition to liaising with management, maintenance and other departments. This is a Monday-Friday position where you can increase your earnings through overtime, a bonus and optional on call work. This position would suit a Process Control / Instrumentation Technician or similar, looking to join a reputable company offering autonomy, specialist training, and ongoing progression into more senior roles. The Role: Conduct a variety of checks and inspections at a Gas Storage facility Carry out both planned and reactive maintenance tasks Support and enhance site safety standards Work independently and collaboratively within a team Optional overtime and on-call opportunities to boost earnings The Person: Process Control / Instrumentation Technician Basic Electrical skills Commutable to Alton Process, Control, Instrumentation, Technician, Engineer, Gas Storage, Production, Process Engineering, Live Plant, Oil & Gas, Electrical, Alton, 18th, Hampshire, Berkshire, Basingstoke, Guildford Reference number: BBBH24668 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Senior Refrigeration & Air Conditioning Engineer £45,000 - £55,000 + Overtime + Bonus (OTE £65k+) ?? Hampshire (within 50-mile radius) I'm currently recruiting on behalf of a well-established and growing company for a Senior Refrigeration & Air Conditioning Engineer . This is a key position within the business, ideal for an experienced engineer looking to step into a more senior role with added responsibility, influence, and long-term progression. The Role You'll be the go-to engineer on site-handling complex faults, supporting junior engineers, and ensuring high standards across service and maintenance work. Service, maintenance & fault finding on commercial refrigeration & AC systems Diagnose and resolve complex technical issues Support and mentor junior engineers Assist with commissioning and system optimisation Work independently across customer sites Participate in a 1-in-7 call-out rota Use Simpro system for job management and reporting What They're Looking For F-Gas Category 1 Strong background in commercial refrigeration & air conditioning Proven experience handling complex faults and large systems Full UK driving licence Strong communication and customer-facing skills Ability to lead by example and support junior engineers Based in or around Hampshire Desirable (Not Essential) CO2 experience Commissioning experience Experience with Dixell XWeb / monitoring systems Previous mentoring or supervisory experience What's On Offer Door-to-door pay Overtime @ 1.5x (Mon-Sat) & 2x Sundays 45-hour contract 1 in 7 call-out rota Company van + fuel card Phone, tablet & specialist tools 25 days holiday + bank holidays Performance-related bonus Ongoing training & progression into supervisory roles Reference: INDAV Interested? Apply today to be considered for this exciting Alton based opportunity. Alecto Recruitment Limited is acting as an employment business for this vacancy. Due to high application volumes, only shortlisted candidates will be contacted. Keywords: Air Conditioning Engineer, HVAC Engineer, Air Conditioning Technician, HVAC Technician, Installation, Maintenance, VRV, VRF, Split Systems, TPBN1_UKTJ

To provide North London field-based service and support to our clients. The job will involve servicing and supporting audio-visual, video conferencing, pro audio, and control equipment. The Audio-Visual Service Engineer will work from home and receive a monthly car allowance of £350.

Key Responsibilities * Provide 3rd line technical support for complex incidents and problems * Act as an escalation point for Microsoft 365, Active Directory, and core infrastructure issues * Administer and support Microsoft 365 (Exchange Online, SharePoint, OneDrive, Teams, Intune) * Ma

Our client, a well-established MSP based near Aldershot, is seeking an experienced IT Support Engineer to join their team. Supporting a diverse client base across the Education sector and local SMEs, this role offers excellent variety, responsibility, and the opportunity to work across multiple tech

Offer support after project completion (hypercare) to ensure a smooth user experience and address any immediate issues until handover to the service desk.

You’ll be working alongside a close-knit group of four skilled Engineers who are passionate about delivering exceptional support and solving problems together and independently. As a member of their team, you’ll have the opportunity to mentor and guide Junior Engineers, helping them grow

An opportunity has come up for an IT Support Engineer to join a well-established business within a close-knit internal IT team. Provide 1st/2nd line support to internal users (circa 300 users). Support Microsoft 365 / Office 365 environment (Exchange, Teams, SharePoint).

My forward thinking technically focussed client is seeking a bright and engaging Senior IT Support Engineer to join their small team. This role is ideal for someone who enjoys solving complex technical issues, mentoring junior engineers, and playing a key part in maintaining and improving IT service

As a Project Support Engineer, youll play a key part in producing technical documents, reports, project plans and customer deliverables that support the full project lifecycle. Were supporting a specialist engineering business looking for a. Key Responsibilities of the Project Support Engineer.

System Support Engineer (PLC, SCADA) (Nights). Experience in a System Support, Service or Maintenance Engineering role. Benefits include supportive working environment with personal development plans, annual pay reviews, opportunities to progress, enhanced holiday allowance, on-site gym, flexi time

With an expanding client portfolio, you will work as part of a dedicated technical team delivering high-quality IT support to multiple clients in a fast-paced environment. The role involves providing escalation support to both technical and account management teams, ensuring solutions and projects a

We are looking for aClientSupport Engineerto join our growing team of like-minded tech people.

Job title: Technical Support EngineerJob Type: ContractStart date: ImmediateDuration: Up to Dec 2026 (Extension possible beyond this)Pay rate: </

Alongside their PLC HMI SCADA and Electrical Control Systems Design, my clients have a thriving/ expanding division that offers PLC and Control Systems Support to maintenance teams in factories- helping them to fault find using PLCs, PLC software, plugging the gap in site automation, doing small pro

Tutor support is provided throughout, alongside portfolio-building and job readiness support. Junior AI Developer Programme – Job Support Included. Study part-time, build coding and AI fundamentals, and receive structured job support to help you secure your first role.

Ready to grow? Become a Water Supply Pipe Engineer with full training and support at HomeServe.

Tutor support is provided throughout, alongside portfolio-building and job readiness support. Study part-time, build coding and AI fundamentals, and receive structured job support to help you secure your first role. Junior AI Developer Programme – Job Support Included.

Join Our Team at Smurfit Westrock! Apply (by clicking the relevant button) after checking through all the related job information below.Are you searching for a workplace that values you and your growth? At Smurfit Westrock, we're committed to sustainability, employee well-being, and personal develo

AI Engineer Programme – Job Support Included. Study part-time, build practical artificial intelligence and machine learning skills, and receive dedicated job support to help you secure employment. The programme includes hands-on projects, real-world problem-solving, portfolio development, expert t

We are looking for a2nd Line Support Engineerto join our growing team of like-minded tech people. Should you choose to accept, your responsibilities will encompass:Providing exceptional remote technical support for cases which cannot be resolved by our 1st line Engineer

Tutor support is provided throughout, alongside portfolio-building and job readiness support. Junior AI Developer Programme – Job Support Included. Study part-time, build coding and AI fundamentals, and receive structured job support to help you secure your first role.

Role Overview:This role is an ideal gateway into IT and the wider opportunities within a major global IT company.You will have the opportunity to access the certification program for one of the worlds largest computer manufacturers.It would be well suited to those who ha

AI Engineer Programme – Job Support Included. Complete online training designed to take you from beginner level to your first AI Engineer role. Study part-time, build practical artificial intelligence and machine learning skills, and receive dedicated job support to help you secure employment.

Position Overview The BESS Technical Support Engineer / Specialist is responsible for providing pre-sales and post-sales technical support for Battery Energy Storage Systems (BESS), ensuring optimal performance and customer satisfaction. Pre-Sales & Solution Support • Support the sales and appli

AI Engineer Programme – Job Support Included. Complete online training designed to take you from beginner level to your first AI Engineer role. Study part-time, build practical artificial intelligence and machine learning skills, and receive dedicated job support to help you secure employment.

Audio Visual Field Service Engineer (residential) - I am now looking for an AV experience residential service engineer with either a good residential audio visual background (4 years) to take on av projects and systems that have been integrated into millionaires and billionaires homes, apartments, p

Circa 2 years experience in technical support or customer-facing engineering roles. Get notified about new Technical Support Engineer jobs in London Area, United Kingdom. Technical Support Engineer - Very Well-Backed Start-Up - Fintech - London.