Trabajos support engineer en PeterboroughCrear alertas

Systems EngineerWork on highly complex communications and network-based technology used within mission-critical environments worldwide.This is an opportunity for a Systems Engineer to join a business developing advanced RF and integrated systems where reliability, performance, and technical quality are paramount.As a Systems Engineer, you will play a key role in the development of advanced communications and network-based systems within a highly technical engineering environment. Working across the full product lifecycle, you will help design, develop, and verify integrated system solutions that support critical aviation infrastructure globally.This role would suit an experienced Systems Engineer with a strong background in RF systems, radio communications, networking technologies, and systems integration. You will be joining a collaborative multidisciplinary team where technical thinking, problem solving, and engineering quality are genuinely valued.Job ResponsibilitiesContribute to the full product development lifecycle from requirements capture through to verification and deliveryDefine and document system level requirements and functional specificationsBreak down high-level customer and technical requirements into detailed functional use casesSupport system architecture development for RF and communications-based productsConduct technical design reviews and provide engineering input throughout development phasesWork on integrated system solutions involving radio communications, IP networking, VoIP, and associated technologiesEnsure systems comply with relevant industry standards, regulations, and technical requirementsProduce detailed technical documentation including system diagrams, configurations, and operational proceduresSupport verification, validation, and integration activities across hardware and software environmentsIdentify technical risks and support resolution activities throughout projectsContribute to system commonality and compatibility across product rangesSupport future product and technology planning activitiesProvide technical guidance and coaching to junior engineersWork closely with multidisciplinary engineering teams across systems, software, hardware, and product functionsSkills and ExperienceEssentialPrevious experience working as a Systems Engineer, Senior Systems Engineer, or within a similar systems-focused engineering roleDegree qualified in a relevant engineering or technical disciplineStrong background in radio communications, RF systems, or related communications technologiesGood understanding of IP networking technologiesExperience working with VoIP systems and network-based communicationsStrong understanding of the full product development lifecycleAbility to translate requirements into functional system behaviours and use casesStrong analytical and problem-solving skillsExperience producing technical system documentationUnderstanding of systems integration and verification activitiesEligibility to obtain and maintain BPSS security clearanceBeneficialExperience with cyber security measures or cyber resilience would be highly beneficialExposure to hardware design and/or software engineering would be advantageousKnowledge of wider network technologies would be beneficialPay and BenefitsSalary up to £55,00037.5-hour working week with flexitime and core hours between 09:3015:0025 days holiday plus bank holidaysEnhanced pension scheme with up to 8% company contributionPrivate healthcareLife assuranceBuy and sell holiday schemeLiberty Days allowing annual leave requests on the dayLong service and retirement awardsSubsidised staff canteenCycle to work schemeFlu vaccinationsContinuous training and learning opportunitiesEmployee Assistance Programme and wellbeing supportFree on-site parkingIf you are a Systems Engineer looking for a role where you can work on genuinely complex technology with real-world global impact, this opportunity offers the chance to be part of a highly respected engineering environment with long-term career development and technically challenging projects. Apply now.TPBN1_UKTJ

SureserveSureserve mission is to be the trusted partner of choice to the social housing and related public sector in delivering essential and affordable heating, energy savings, and compliance solutions.We are playing a key and progressive role in decarbonisation, always delivering for customers, employees, residents and the environment with safety, integrity and respect at the forefront of everything we do.We provide trusted high-quality solutions that focus on energy efficiency, warm, safe, and compliant homes, and an improved quality of life for residents.With a Nationwide reach, regional and local relationships and expertise, and commitment to excellent client service we are set up to be a trusted partner for now and the future.Sureserve Compliance CentralWe are a national company offering market leading heating & hot water solutions from a network of regional offices across the East of England and the Midlands, strategically positioned to ensure comprehensive coverage and uncompromised access to our clientsWe are seeking an experienced gas engineer to join our busy team to carry out service, and repairs on domestic heating and hot water systems for our customers.Overview of Role:The primary responsibility of the Heating Engineer will be to maintain and repair heating systems in our clients' properties. They will ensure that the heating & hot water systems are operating efficiently and safely, and that any repairs are completed in a timely manner ensuring customer satisfaction.Key Responsibilities: Carry out service and maintenance works on a variety of domestic properties across the region.Ensuring high levels of customer care in dealing with clients and tenants to meet the required quality standards.Communicate updates and progress of work, completing the required paperwork electronically and manually.Ensure all Health and Safety requirements and legislation, including Risk Assessments, Safe Systems of Work and COSHH Records, are adhered to during your daily work.To comply with stock ordering and auditing procedures so relevant parts are available to fulfil job requirements.Key Attributes & Requirements: Gas qualifications are essential for this role including as a minimum CCN1, CENWAT, HTR1, CKR1.Out of Hours evening and weekend cover on a rota basis is required as part of this roleA friendly and professional attitude to build strong relationships with clients & tenantsIt is important that we complete all the appropriate criminal and reference checks before you start working with us.Working hours are: 5 days per week (Mon - Fri) 8am to 5pm - 40 hrs1 hour for lunch daily, call out rota to go on doing evenings & weekend work.What We Offer: Company vehicle and fuel cardSupport provided for professional qualificationsEmployee wellbeing programme, occupational health support, telephone support- counselling for staffService level awarded annual leaveEnhanced maternity & paternity packagesDental/Healthcare cash planCycle to Work SchemeElectric Vehicle Leasing SchemeGender & Equality Working GroupSureserve Academy- a platform for development, career progressionEmployee Voice programmeSocial activities for all of our TeamsSureserve Legends- celebrating the fantastic ways in which our employees live our values.Sureserve is committed to creating a diverse and inclusive workplace. We celebrate individual differences and believe that they contribute to our collective success. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contactSuccessful applicants will be subject to eligibility checks including the right to work in the UK and DBS checks.Join us in our mission to deliver excellence across the UK.TPBN1_UKTJ

Job Description:This role offers the opportunity to develop your career in a supportive environment where your contribution genuinely matters and where you will be trusted to make a difference.We are looking for someone who is eager to develop, communicates clearly, works collaboratively, takes ownership and consistently delivers high standards while reflecting our values in everything they do.The ideal candidate will bring a positive, can-do attitude, a strong work ethic, and a willingness to get stuck in, embracing opportunities to learn, supporting colleagues, and contributing to the success of the wider team.You will be fully supported and encouraged to improve and progress as we want to develop and keep exceptional engineers.What We OfferWe believe in recognising and rewarding great work. Our benefits include:Competitive hourly rateCompany vehicle with fuel card or allowanceCorporate clothingEmployee profit share scheme and long service awards21 days holiday plus bank holidaysEarly finish on FridaysHealth and wellbeing support, including access to qualified Mental Health First AidersPositive working culture supported by the Princebuild Founders Trust and Princebuild Foundation, helping local community projectsOngoing training, development, and clear career progression opportunitiesAn inclusive employer, accredited by Investors in People and Positive About Disabled PeopleRegular social events and charity initiatives throughout the yearWhat Were Looking ForWe welcome applicants from a range of backgrounds and experience. To succeed in this role, you will ideally have:Essential:NVQ Level 3 in Plumbing & Heating or relevant equivalentMinimum of 3 years experience as a plumbing & heating engineer or a similar roleUnvented Hot Water and Water Supply (Water Fittings) Regulations certificationsKnowledge and strong understanding of commercial mechanical systemsWillingness to travel on a daily basis and stay away when required for the needs of the businessA proactive, positive and solutions-focused approach aligned with our values of Building, Sharing, and CaringExcellent communication and teamwork skillsConfidence using IT systems (Microsoft Office and project tools). Site based employees are issued with an iPad and relevant work programmesFull UK driving licence (minimum 6 months post-test experience)Commitment to professional standards, learning and continuous improvementDesirable:Gas QualificationsJIB PHMES CSCS CardSMSTS or SSSTSFirst Aid at Work CertificationIPAF MEWP 3a & 3b,PASMA Towers for UsersWe encourage you to apply even if you do not meet every requirement. Attitude, potential, and willingness to learn are just as important to us.Please Note: This role requires an Enhanced DBS check (including the Childrens and Adults Barred Lists), any may require additional vetting as required by clients. All checks must be maintained and renewed upon request.Job Description What Youll Be DoingReporting to the Department Manager, you will support the Building Services team in delivering a diverse range of mechanical projects valued up to £1m. Projects span commercial, retail, public sector and government properties, including shopping centres, supermarkets, police stations and other secure facilities, some of which may require additional security clearance.This is a varied, hands-on role involving installation, maintenance, fault-finding, repair and upgrade works on commercial heating and plumbing systems. Duties may include servicing and replacing boilers, maintaining heating plant and plant room equipment, carrying out planned and reactive maintenance, commissioning systems, and diagnosing faults to ensure minimal disruption to customers.TPBN1_UKTJ

Dual Fuel Smart Meter Engineer for Ganymede EnergyGanymede Energy are looking to grow our smart home workforce and are seeking safety-focused Dual Fuel engineers to become a part of our growing business.With an industry leading operational support team combined with industry leading high-tech equipment, localised working regions, opportunities to upskill in the future to EV & PV so you can benefit from being an all-round smart home engineer, whilst working in partnership with our client who both share a clear and transparent vison as we move towards our goal of NET zero.We believe we are offering a great work life balance solution, whilst still being able to earn one of the best salaries within the industry with long term job security.Dual Fuel Engineer Overview:Basic Salary: £39,650Bonus: £2,000 yearly bonus paid in December!Excellent work life balance: 40 hours per week, 8am – 4pm shifts.Food allowance card: £60 per month to buy your lunch on us! (£720 per year)Holiday: 31 days!Equipment: Brand New Van, Fuel Card, PPE, Tools, Equipment and Hand-Held Unit all providedAbout youMinimum Qualifications: CCN1/CMA1 & MET1 or Level 2 Smart Meter Diploma.You must have a minimum of 6 months experience as a dual fuel meter installer.You will need to have a passion for delivering good customer service.If you are interested in joining a growing business at an exciting time, you can apply directly below or send your CV to or call me on for a full job description.Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientationTPBN1_UKTJ

Junior Service Engineer (ACS / Gas Safe)£33,000-£36,000 (OTE £50,000-£55,000) + Overtime + Door-to-door pay + Company Van + Fuel Card + Flexible Hours + Training + Qualification Support + Progression + Company BenefitsPeterborough- with regional travelAre you ACS / Gas Safe registered? On offer is a varied, fast-paced role where you will cover a regional patch within a leading company who offer specialist training to upskill yourself in Commercial Gas and both door-to-door pay and overtime to greatly increase your earnings.This industry-leading company are a manufacturer and distributor of spray booths for a broad range of clients across numerous industries including automotive, aerospace and rail. They have seen continual growth in the past 30 years and due to an ever increasing workload are looking to grow their friendly team.This varied role will see you initially shadowing senior engineers and then working autonomously as you carry out a range of PPM in addition to some reactive breakdown work on specialist spray booths. You will cover a regional patch (roughly 2 hours primarily within the A1 corridor - from Peterborough up to Doncaster), working a 40 hour week with any overtime and further travel paid at 1.5x.This exciting role would suit someone with ACS / Gas Safe registration looking to join a leading company who offer specialist training, the chance to greatly increase your earnings and to continually progress to senior roles.The Role: \n\n • Carry out planned servicing and breakdown repair on spray booths\n, • Hands on role including some working at height\n, • Covering a regional patch - A1 Corridor - Peterborough to Sheffield / Doncaster\n, • Door-to-door pay (1.5x) and uncapped overtime over 40 hours\n\n The Person: \n\n • ACS / Gas Safe Registered\n, • Looking for a role with lots of travel / overtime\n, • Based near Peterborough- Full Driving Licence\n\n Service, Engineer, Junior, Trainee, Gas Safe, ACS, Commercial, Maintenance, Reactive, Regional, Door-to-door, Bespoke, Field, COCN1, CODNCO1, Peterborough, Doncaster, Nottingham, SheffieldReference number: BBBH26560If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Job Role: Technical Trainer (Plant, Agriculture, Hire Equipment)Location: Peterborough, CambridgeshireSalary: £36,000 - £38,000 per annumHours: Monday-Friday, Days, 40 hours per weekJob Type: Full time, PermanentThe Client:Interaction are working with a well-established specialist engineering organisation that supports customers nationwide with advanced machinery and technical solutions. Due to continued growth, they are looking for an experienced Technical Trainer to join their team.This is a fantastic opportunity for someone from a specialist vehicle, agricultural equipment, or heavy machinery background who wants to use their technical expertise to develop and deliver training for engineers, employees, and customers.The Package:· Company Vehicle· 24 days holiday plus bank holidays, increasing with service up to 28 days· Company pension scheme from day one (4% employer contribution and 4% employee contribution)· Internal and external training and development opportunities· Long-term career progression within a growing organisation· Monday-Friday working hoursThe Duties:· Develop and deliver technical training programmes for employees, engineers, and customers.· Create high-quality training materials including presentations, handouts, technical documents, and e-learning content.· Deliver training on machine operation, programming, diagnostics, maintenance, and repair.· Provide technical training using knowledge of electrical systems, hydraulics, pneumatics, mechanics, and programming.· Become a subject matter expert in digital logic and telematics systems.· Support customers with technical advice, route recording, and product guidance.· Maintain and update training programmes to include new products, updates, and innovations.· Keep accurate training records and manage certification following training events.· Support warranty procedures, product recalls, and modification programmes.· Organise external training requirements, including CPC and statutory training.The Requirements:· Technical background within specialist vehicles, agricultural equipment, heavy machinery, or engineering.· Strong knowledge of electrical and hydraulic systems.· Hands-on experience with diagnostics, fault finding, and machinery repair.· Previous experience delivering operator through to technical training.· Experience producing technical documentation and training materials.· Good knowledge of Microsoft Office packages.· Relevant engineering qualifications (vehicle, agricultural, mechanical, or electrical).· Strong communication and presentation skills.· Teaching or training qualifications would be advantageous.· Full UK Driving Licence.For more information regarding this position or to discuss other opportunities, please contact our specialist recruitment team on 07969154727.Thank you for taking the time to review this opportunity, and we look forward to speaking with you soon.Similar roles include: Technical Trainer, Engineering Trainer, Product Trainer, Field Service Engineer, Service Engineer, Maintenance Engineer, Agricultural Engineer, Plant Engineer, Vehicle Technician, Mechanical Engineer.TPBN1_UKTJ

AC EngineerPeterborough£ 42 ,000-£50,000 + (OTE £65,000) + Paid Door to Door + Company Van + Pension + Minimal Call Out + Unlimited Overtime + Training Opportunities + Holiday + Pension + Expenses PaidAre an AC Engineer who's looking to join a well-established national company that offers unlimited overtime, while maintaining a genuinely non-corporate culture where every team member is valued?With a clear focus on additional on-site support, ongoing training and recognised qualifications, this is a business that genuinely invests in its employees and gives them the opportunity to develop their skills, increase their earnings and build a long-term career.In this role as AC Engineer, you'll work across a variety of commercial and industrial sites, including office blocks and warehouses, where no two days are the same. You'll be responsible for servicing, maintaining, diagnosing, repairing, AC and refrigeration systems, giving you the opportunity to apply and expand your technical skills in a hands-on environment.Your Role as AC Engineer Will Include:Service and maintain air conditioning and refrigeration systems across commercial and industrial sites.Diagnose and repair AC and refrigeration equipment independently.Travel to sites across the UK, with occasional overnight stays as required.Participate in a minimal callout rota (approx. 1 in 8 weeks) with premium pay.The AC Engineer Will Need to Have:F-Gas qualified3+ years' experience in air conditioning or refrigeration (commercial/industrial)Valid UK Driving LicenceApply now or call 07458143259 for immediate consideration!AC Engineer, Air Conditioning, Refrigeration, HVAC, Technician, Commercial AC, Industrial, Service, Maintenance, Fan coil, ACU, Mobile, Fgas,TPBN1_UKTJ

What you'll be doing What you'll be doing:Working alongside Project Managers, Site Managers, Design Teams and Delivery Partners, you'll help drive engineering excellence while supporting innovative and sustainable solutions across our AMP8 programme.Setting out and surveying works in accordance with approved drawings, specifications and project requirements.Ensuring construction activities are delivered safely, efficiently and in line with programme objectives.Producing and maintaining accurate site records, quality assurance documentation and as-built information.Supporting the planning, coordination and delivery of construction activities across multiple projects.Working closely with design teams to identify and resolve technical issues and engineering challenges.Monitoring subcontractor activities to ensure works are delivered to the required quality, safety and environmental standards.Undertaking inspections, testing and verification activities to support successful project deliveryAssisting with risk management processes and ensuring safe systems of work are effectively implemented.Supporting environmental, sustainability and health & safety objectives across all project activities.Building strong collaborative relationships with Alliance partners, suppliers and site teams to drive successful outcomes. Who we're looking for What you'll bring:Degree, HNC or HND qualification in Civil Engineering or a related discipline.Experience working as a Site Engineer within construction, utilities, civil engineering or infrastructure environments.Strong understanding of engineering principles, setting out techniques and surveying equipment.Ability to interpret engineering drawings, specifications and technical documentation.Knowledge of quality assurance processes and construction standards.Understanding of health, safety and environmental requirements within construction environments.Strong communication and stakeholder engagement skills.Good working knowledge of Microsoft Office applications.A proactive approach to problem solving and continuous improvement.Full UK driving licence and willingness to travel across the Anglian Water region.Join us and help deliver the innovative infrastructure that supports people, communities and the environment across the Anglian Water region.#oneAlliance #BalfourBeatty Why work for us Day in, day out, our teams deliver some of the UK’s most ambitious, exciting and meaningful projects; developing, building and maintaining the vital infrastructure that supports national economies and strengthens communities.Why join us?As if contributing to and supporting work that makes life better for millions wasn’t rewarding enough, we offer a full range of benefits too. You’ll have the freedom to shape the package that’s right for you and your life. Here are some of our key benefits:- Smart working, giving you more flexibility such as staggered start and finish times, with up to 40% remote working, where roles allow.- 25 days paid annual leave (pro rata)- Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leave- Pension, share incentive plan, volunteering leave, recognition schemes and much more… About us Balfour Beatty’s Highways business delivers major schemes including motorway upgrade programmes, complex national infrastructure projects and regional investment programme works for National Highways. We have a strong orderbook and a positive pipeline of opportunities, we put the road user, at the heart of everything we do. We work safely, reduce carbon emissions and added social value to the communities within which we work.Diversity and inclusionAt Balfour Beatty we believe that diversity and inclusion are essential components of any successful, happy workplace. Through our Value Everyone Diversity and Inclusion Strategy and Action Plan, we are growing our diverse workforce and developing our inclusive culture where everyone is able to thrive and reach their full potential, regardless of their identity or background. To find out how we are making this a reality, visit To help and support us with our desired commitment to create an inclusive culture we are members of WISE, enei, Business Disability Forum and the Association for Black and Minority Ethnic Engineers (AFBE). In 2020, we signed the Audeliss and Involve Open Letter to demonstrate our commitment to taking key long term and sustainable actions on Black Inclusion. Balfour Beatty is also a Gold Award holder in the Ministry of Defence 'Employer Recognition Scheme' and actively encourage applications from Armed Forces personnel, veterans and reservists.As a Disability Confident Employer, we are committed to working with people who have disabilities and long-term health conditions to remove barriers for them in obtaining employment. We are also committed to offering applicants with a disability an interview if they meet the minimum requirements for the role. For more info, visit: We are looking to continually improve our resourcing process and ensure that it is fair and inclusive for all. If you have any feedback on the process, please share this with us at: candidaterecruitmentqueries@balfourbeatty.com

Service Manager \n North Nottinghamshire \n £50,000 - £55,000 \n \n We're recruiting on behalf of a growing and customer-focused organisation seeking an experienced Service Manager to lead its service delivery function. This is an exciting opportunity for a proactive leader who is passionate about delivering exceptional customer service, managing and developing a team of office-based staff and field engineers, and driving continuous improvement across service operations. You'll play a key role in maintaining high service standards, strengthening customer relationships, and supporting the ongoing success of the business. \n Service Manager Key Responsibilities \n\n • Lead, motivate and develop the service delivery team, promoting a culture of exceptional customer service and continuous improvement.\n, • Act as the main point of contact for customers, resolving service issues and maintaining strong client relationships.\n, • Develop and implement service standards and processes to improve efficiency and increase first-time fix rates.\n, • Coach and support team members through regular performance reviews and ongoing development.\n, • Produce management reports, analysing service data to identify trends and recommend improvements.\n, • Build and manage a network of subcontractors, ensuring consistently high standards of service.\n, • Manage field-based engineers, conducting regular audits of vehicles, stock and performance, alongside site inspections.\n, • Work closely with the sales team to deliver effective service and maintenance solutions for customers.\n, • Oversee parts management, including stock control, ordering and allocation for service and planned works.\n, • Prepare repair quotations, obtain customer purchase orders and coordinate parts for scheduled work.\n, • Review engineer job sheets to ensure accurate documentation, parts usage and compliance.\n, • Oversee the financial performance of the service department, ensuring effective cost control and governance.\n, • Coordinate engineer site visits, including scheduling and preparing RAMS and all required site documentation.\n, • Maintain refrigerant gas stock levels at the depot and provide customers with equipment operation and maintenance guidance where required.\n\n Key Skills and Experience \n\n • Previous experience in a Service Manager, Service Delivery Manager or Operations Manager role.\n, • Experience managing field service engineers and coordinating service operations.\n, • Strong leadership skills with the ability to coach, mentor and develop high-performing teams.\n, • Excellent customer service and relationship management skills.\n, • Strong commercial awareness and experience managing service performance and budgets.\n, • Confidence analysing operational data and producing management reports.\n, • Excellent organisational skills with the ability to manage multiple priorities.\n, • Strong communication skills and the ability to work collaboratively across departments.\n, • Experience within engineering, HVAC, refrigeration, mechanical or a similar technical environment would be advantageous.\n\n

HGV Field Service TechnicianAbout UsJG Pears is a fourth-generation family business that grew from a livestock farm near Penistone into one of the largest names in the UK's animal by-products sector. The Group continues to invest in keeping its fleet safe, compliant and on the road across all its sites.We're looking for an experienced Field Service Technician to join our HGV Mechanic Team, working from a fully equipped service vehicle to deliver maintenance, servicing, diagnostics and repairs to our fleet wherever it's needed.\n\n • Salary: £22.50 per hour, monthly paid, plus overtime at time and a quarter after contracted hours\n, • Location: Based from Low Marnham, NG23 6SP, travelling to JG Pears sites as required\n, • Working pattern: Monday to Friday, 6:00am to 4:00pm\nCore Benefits\n\n, • Retention bonus after a qualifying period\n, • 28 days holiday entitlement (pro-rata)\n, • Paid breaks\n, • Company pension scheme (employer contribution 3% Employee contribution 5%)\n, • Company sick pay scheme\n, • £300 Introduce a Friend reward\nAbout the RoleThis is a road-based role, working from a fully equipped service vehicle to respond to planned maintenance and breakdowns across JG Pears sites. You'll be trusted to manage your own workload independently while keeping the fleet safe, compliant and operational.What You'll Be Doing\n\n, • Carrying out planned servicing, maintenance and repairs on HGV trucks and trailers across JG Pears sites\n, • Travelling to company sites to diagnose and repair mechanical, electrical and hydraulic faults\n, • Responding to vehicle breakdowns and providing effective roadside and onsite support\n, • Completing inspections and preventative maintenance to minimise downtime\n, • Preparing vehicles for MOT and ensuring full DVSA compliance\n, • Completing all maintenance records and paperwork accurately\n, • Liaising with the workshop team and operational departments to prioritise repairs and maximise fleet availability\nWhat You'll Bring\n\n, • Fully qualified HGV Technician with a City & Guilds or NVQ Level 3 qualification in Heavy Vehicle Maintenance and Repair, or equivalent\n, • Previous experience maintaining and repairing HGV trucks and trailers\n, • Strong fault finding and diagnostic skills across mechanical, electrical and hydraulic systems\n, • Ability to work independently and manage your own workload while working remotely\n, • Excellent attention to detail with a strong focus on safety, quality and compliance\n, • Full UK driving licence\nAdditional Benefits & Perks\n\n, • Life assurance\n, • Occupational health\n, • 24/7 GP and Mental Health Support, Wellbeing and Nutrition Programmes, Second Medical Opinion, Health Resources, Emotional Wellbeing App, Smoking Cessation Support and Bereavement Counselling\n, • JG Pears Rewards (retail, restaurant and gym discounts)\nAdditional InformationDue to the site's location, own transport is essential.Ready to take the next step? Apply today and grow with us at JG Pears.Keywords: Mobile HGV Technician, HGV Field Engineer, Mobile HGV Engineer, Field Service Engineer (HGV), Mobile Vehicle Technician (HGV), HGV Breakdown Technician, Roadside HGV Technician

Commercial Gas Engineer (Bespoke Products) £40,000-£45,000 (OTE £55,000-£65,000) + Overtime + Door-to-door pay + Company Van + Fuel Card + Flexible Hours + Training + Qualification Support + Progression + Company Benefits Peterborough - with regional travel Are you a Gas Engineer from a Commercial background looking for a varied role working on specialist Spray booths for a range of blue-chip clients across a regional patch within a leading company known for looking after and developing their staff who offer door-to-door pay and uncapped overtime to greatly increase your earnings? This industry-leading company are a manufacturer and distributor of spray booths for a broad range of clients across numerous industries including automotive, aerospace and rail. They have seen continual growth in the past 30 years and due to an ever increasing workload are looking to grow their friendly team. This varied role will see you working autonomously as you carry out a range of PPM in addition to some reactive breakdown work, upgrades and component installation on specialist spray booths. You will cover a regional patch- primarily across the A1 corridor, working a 40 hour week with any overtime and further travel paid at 1.5x. This exciting role would suit a Gas Engineer from an background looking to join a leading company who offer specialist training, the chance to greatly increase your earnings and to continually progress to senior roles. The Role: \n\n • Carry out planned servicing and breakdown repair on spray booths\n, • Hands on role including some working at height\n, • Undertake a range of associated maintenance work\n, • Covering a regional patch around the A1 Corridor - Peterborough to Sheffield / Doncaster\n, • Door-to-door pay and generously paid, uncapped overtime (1.5x) over 40 hours\n\n The Person: \n\n • Gas Engineer or similar\n, • Commercial qualifications / experience\n, • Based near Peterborough- Full Driving Licence\n\n Commercial, Gas, Service, Engineer, HVAC, Gas Safe, ACS, Maintenance, Reactive, Regional, Door-to-door, Bespoke, Field, COCN1, CODNCO1, A1, Peterborough, Doncaster, Nottingham, Sheffield Reference number: BBBH26560 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n

Position: Multi-skilled Shift EngineerLocation: PeterboroughSalary: £53,500 - £55,000Shift: Days and Nights \n About the role:We are seeking a reliable and multi-skilled Shift Engineer to join our team on. The ideal candidate would be confident in both mechanical and electrical disciplines. PLC and inverter experience would also be an advantage. You will need to be self-sufficient and proactive and work well alone or as part of a team.The role will require you to repair and maintain a variety of extrusion, chocolate coating and bakery equipment. This work includes breakdown repairs, machine servicing and improvement projects.This role is on a Continental 3’s & 2’s pattern. \n Key responsibilities \n\n • Carry out maintenance of factory equipment (both mechanical and electrical) in line with the routine maintenance schedule.\n, • Follow and complete the Jobs Log during shift.\n, • Maintain and update the MVP (CMMS) system.\n, • Perform equipment repairs and deal with breakdowns. \n, • Liaise with production teams to minimise downtime caused by engineering work.\n, • Install and commission new equipment.\n, • Manage assigned tasks effectively.\n, • Support and assist external contractors while on site.\n, • Complete assigned projects as agreed.\n, • Attend all required statutory training.\n\n Aptitudes required for this role \n\n • Perform other reasonable duties and responsibilities as required.\n, • Excellent communication and interpersonal skills with strong customer orientation\n, • The ability to integrate and work effectively with others in a changing environment.\n, • Ability to multi-task, prioritize and manage time effectively.\n, • High level of attention to detail, strong organizational, analytical, problem solving and administrative skills\n, • An experienced team player\n, • A strong desire for continuous learning and a desire to grow professionally.\n\n Qualifications and skills \n\n • A recognised electrical/mechanical qualification (NVQ level 3 or equivalent)\n, • Computer skills (A knowledge of CMMS systems and Excel, word, outlook etc.)\n, • IET wiring regulations (18th edition) \n, • Previous knowledge and use of an automated maintenance system\n, • IPAF licence (3a), although training can be provided if required\n

Plant Equipment Instructor \n Peterborough, Stamford, Huntingdon, Spalding, March £36,000 + Pension + Healthcare Cashback Scheme + Career Development \n Are you an experienced engineer with a passion for sharing your knowledge? Do you enjoy helping others develop their technical skills and want to move into a rewarding training role with a market-leading manufacturer? \n On offer is an excellent opportunity to join a well-established engineering business where you'll deliver technical training on specialist vehicles and equipment, supporting engineers, operators and customers across the UK. \n Work for a global manufacturer with an excellent reputation for quality and innovation. You'll become the technical expert for their product range, delivering both practical and classroom-based training while helping develop the next generation of skilled engineers. \n The day-to-day of this role includes delivering technical and operator training, creating and updating training materials, supporting customers with technical advice, organising training programmes, maintaining training records, and assisting with warranty support, product updates and technical documentation. You'll also become the go-to expert for the company's digital systems and telematics. \n The ideal candidate will come from a technical engineering background working on specialist vehicles, agricultural machinery, plant, HGVs or similar equipment. You'll have strong electrical, hydraulic and mechanical knowledge and excellent communication skills. The role:\n\n • Technical Trainer (Specialist Vehicles)\n, • Deliver technical and operator training to engineers and customers\n, • Create training materials and provide technical support\n, • Monday to Friday, 40 hours per week\n, • Site-based in Peterborough with travel to customer sites\nThe person:\n\n, • Background working on specialist vehicles, agricultural, plant or HGV equipment\n, • Strong electrical, hydraulic and mechanical knowledge\n, • Experience with diagnostics, servicing and repairs\n, • Previous training or mentoring experience desirable\n, • Confident presenter with strong communication skills\n, • Well organised and proficient with Microsoft Office\n, • Based in or near Peterborough\n\n BBBH277734 \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Design Engineer / Design Coordinator (Contract or Perm)\n Location: Peterborough \n Rate: £35 - £40ph (Outside IR35) \n Salary: £50,000 per annum + company benefits \n Industry: Food Processing / Process Engineering \n An exciting opportunity has arisen for an experienced Design Engineer / Design Coordinator to support the delivery of engineering and design projects within the food processing industry. \n This is a coo... \n \n ZIPC1_UKTJ

CAD Technician Based in Eye, SuffolkMonday to Friday - 9.00am till 5.00pmPermanent Salary dependent on experienceRole OverviewWe are seeking a motivated and detail-oriented Design Engineer to join our client’s team in Eye, Suffolk.This is an exciting opportunity to work on customer-focused engineering projects, producing accurate designs, drawings, and Bills of Materials that support efficient manufacturing and project delivery.Working closely with engineering, production, and project teams, you'll play a key role in developing innovative design solutions, enhancing 3D design capabilities, and ensuring products are delivered safely, accurately, and to the highest standards. Ideal for someone with a strong engineering background who enjoys problem-solving, collaboration, and making a real impact.Duties Include\n\n • Produce and review approval, fabrication, and construction drawings, ensuring accuracy and delivery within agreed timescales.\n, • Create and check Bills of Materials (BOMs) and parts lists, ensuring they are accurate, up to date, and released efficiently to production.\n, • Work closely with customers, colleagues, and manufacturing teams to ensure clear communication and the smooth flow of information.\n, • Support the ongoing development and use of Autodesk Inventor 3D and Vault Professional across the Engineering & Design team.\n, • Apply Design for Manufacture principles and value-engineering techniques to deliver practical, cost-effective solutions.\n, • Follow engineering best practice to design out hazards and minimise risk wherever reasonably possible.\n, • Contribute ideas and initiatives that improve processes, efficiency, and overall team performance.\n, • Actively support Continuous Improvement, Lean Manufacturing, and ISO 9001 quality initiatives to enhance business performance.\nSkills and Attributes\n\n, • Proficient in Autodesk Inventor 3D, SolidWorks, or similar 3D CAD software, along with AutoCAD.\n, • Able to work independently, using initiative to deliver high-quality, accurate work within deadlines.\n, • Strong engineering and manufacturing background with sound technical knowledge.\n, • Experience creating and maintaining Bills of Materials (BOMs).\n, • Familiarity with ERP systems would be advantageous.\n, • Degree, HND, or equivalent qualification in Engineering, Manufacturing, or a related discipline, or relevant industry experience.\n, • Knowledge of iLogic, Python, or other automation/programming tools would be beneficial.\nCompany Benefits\n\n, • Enhanced company pension scheme with employer contributions of up to 7% for long-serving employees.\n, • Free onsite parking.\n, • Life assurance cover of 3x annual basic salary.\n, • Employee Benefits Programme offering exclusive discounts on high street brands, holidays, days out, dining, and more.\n, • Access to a range of health and wellbeing support tools.\n, • GP on Demand service, confidential helplines, and one-to-one counselling support.\n, • 23 days annual leave, increasing to 25 days with service, plus bank holidays.\n For more information regarding this role, please submit a CV to or call !

Design Engineer \n JTH Recruitment have an excellent opportunity for an experienced Design CAD Engineer to join our well established and reputable engineering client based in Peterborough. My client are offering a competitive salary, overtime, a pension scheme and private health care and ongoing training and development. \n The Role \n Working under own initiative, with support from our close-knit Project Engineering team, fulfilling “inception to completion” design and draughting requirements for food processing lines. \n Developing models and fabrication drawings. Sheet-metal formations and structural steelwork. Working to and delivering highly hygienic (food safe) design standards. \n Candidate (minimum) Attributes \n 3D SolidWorks trained and competent – industrial fabrication drawings \n Previous experience in equipment & steelwork design and fabrication techniques \n Minimum 3 years industrial experience \n HNC / HND qualification in engineering \n Dynamic, enthusiastic and flexible approach \n Willing to travel (occasional need for UK and foreign site surveys) \n Commercial awareness applied to designing - value engineering approach \n Excellent people skills and clear communicator with the ability to form strong team bonds \n Computer literate with working knowledge of the following:- \n SolidWorks (Weldments, sheet-metal, part modelling, piping, stress analysis) \n AutoCAD \n The ideal candidate will have experience in:- \n\n • Food machinery design\n, • Hygienic food-safe solutions\n, • Fabrication processes\n, • CE marking, machinery directive and guarding requirements\n, • Conversant with 2D & 3D\n\n Delivering the wider project needs includes:- \n\n • Site survey of operating areas\n, • Steelwork design, load bearing calculations, fabrication drawings.\n, • Access walkways and staircase design and fabrication drawings.\n, • Documented risk assessments for the specific solutions and the interacting layout.\n, • Process layout refinement and design of interconnecting transfer chutes etc.\n, • Identify foot-loadings for interaction with construction companies.\n, • Identify utility connection points for the process layout.\n, • Receive “as installed” layouts from the installing engineer and update as necessary\n\n This position is based in Peterborough within an easy commute of Hampton, Werrington, Wisbech, Stamford, Orton, Kings Lynn, Spalding, Grantham, Corby, Northampton

Site Support Engineer - Materials Handling Field-Based | Peterborough Competitive Salary + Overtime + Company Vehicle\n The Opportunity We're currently recruiting a Site Support Engineer to join a growing engineering team, supporting customers across the Peterborough region. This is a fantastic opportunity for a hands-on engineer who enjoys varied, autonomous work, building relationships with customers while maintaining high-quality service standards. \n Key Responsibilities \n\n • Carry out planned preventative maintenance (PPM) and reactive repairs on materials handling equipment\n, • Diagnose faults using electrical and mechanical troubleshooting skills\n, • Complete accurate service reports, documentation, and parts management\n, • Deliver excellent customer service on-site, acting as a company ambassador\n, • Identify upsell opportunities and additional work where appropriate\n, • Ensure full health & safety compliance at all times\n\n About You We're looking for candidates with a strong engineering mindset and practical experience, ideally from one of the following backgrounds: \n\n • Automotive / Vehicle Technician\n, • HGV / Plant / Forklift Engineering\n, • Agricultural or Military Engineering\n\n You'll also have: \n\n • Solid mechanical and electrical fault-finding skills\n, • Experience working in a field-based or customer-facing role\n, • The ability to work independently and manage your own schedule\n, • A full UK driving licence\n\n What's in It for You \n\n • 80% of this role will be based at one customer site, with the other 20% being spread across other sites in Peterborough.\n, • Competitive base salary + overtime paid at enhanced rates\n, • Company vehicle (fully equipped)\n, • Ongoing training and development opportunities\n, • Stable, long-term career in a high-demand engineering sector\n, • Supportive team environment with strong progression potential\n\n Key Skills \n\n • Fault finding & diagnostics\n, • Time management & organisation\n, • Customer service & communication\n, • Problem-solving\n, • Initiative & teamwork\n\n Apply Today If you're a skilled engineer looking for a varied field-based role with strong earning potential, we'd love to hear from you.\n Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Mechanical Design Engineer \n Location: Newark Salary: £28,000 - £35,000 DOE Job Type: Full-time | Permanent \n Overview \n An exciting opportunity has arisen for a Mechanical Design Engineer to join a growing building services engineering team based in Newark. We are seeking candidates at all levels, from trainees and graduates to experienced design engineers. \n This role offers a fantastic chance to develop your career in a technically diverse environment, working on both design and project delivery across a variety of mechanical building services. \n Benefits \n\n • Competitive salary of £28,000 - £35,000 DOE.\n, • Full-time, permanent position with long-term career prospects.\n, • Opportunities available for candidates at multiple levels of experience.\n, • Exposure to a variety of building services projects.\n, • Comprehensive technical training and career development opportunities.\n, • Hands-on experience in both design and project delivery.\n, • The chance to work alongside experienced and supportive engineering professionals.\n\n Day-to-Day \n Your daily activities will include: \n\n • Designing and developing mechanical building services systems such as heating, ventilation, cooling, and domestic services.\n, • Collaborating with clients, contractors, and suppliers to deliver tailored solutions.\n, • Conducting technical assessments and simulations to ensure optimal system performance.\n, • Preparing technical documentation and ensuring compliance with industry standards.\n, • Supporting project delivery teams and overseeing the commissioning process.\n\n Responsibilities \n As a Mechanical Design Engineer, you will play a key role in delivering innovative and efficient building services solutions. Your responsibilities will include: \n\n • Developing 2D and 3D CAD layouts and visuals.\n, • Supporting full mechanical building services design requirements.\n, • Conducting building environmental modelling using industry-standard software.\n, • Undertaking dynamic thermal simulations and summertime overheating assessments.\n, • Completing Part L calculations and preparing applications for incoming utilities.\n, • Reviewing low-carbon design solutions and performance specifications.\n, • Assisting in the development of technical design documentation.\n, • Collaborating with project installation teams, suppliers, and specialist subcontractors.\n, • Supporting commissioning activities and creating commissioning plans.\n, • Reviewing and checking designs produced by colleagues, consultants, and contractors.\n, • Providing technical support to construction teams to ensure compliance with design and legislative requirements.\n\n Qualifications \n We are looking for candidates who are articulate, confident, and professional, with the ability to work effectively both independently and as part of a team. \n Ideal candidates will have: \n\n • HNC, HND, or Degree in Mechanical Engineering, Building Services Engineering, or a related discipline.\n, • Previous experience in building services design within a consultancy or contracting environment.\n, • A sound understanding of mechanical building services.\n, • Proficiency in relevant CAD/design software.\n, • Strong communication and organisational skills.\n, • A proactive approach to problem-solving.\n\n Trainee/Graduate candidates with a strong academic background and a genuine interest in building services engineering are also encouraged to apply. \n If you are passionate about mechanical design and eager to contribute to innovative building services projects, we would love to hear from you. Apply today to take the next step in your engineering career!

This Multi-skilled / Electrical Engineer role is responsible for maintaining, fault-finding and improving a range of industrial plant and processing equipment to maximise reliability and minimise downtime. Working closely with operations, you'll deliver planned maintenance, breakdown support and continuous improvement initiatives in a safety-focused environment. \n Client Details \n Our client is a well-established industrial and processing business operating a busy engineering environment. They are committed to safety, operational excellence and continuous improvement, offering engineers the opportunity to work on varied equipment while supporting site reliability and performance. \n Description \n As a Multi-skilled / Electrical Engineer, you will play a key role in maintaining the safe and reliable operation of plant and process equipment across the site. You will carry out planned preventative maintenance, electrical fault-finding, breakdown repairs and reliability improvements on equipment including motors, drives, conveyors, sensors, control panels and associated mechanical systems. \n Key responsibilities include: \n\n • Diagnose and repair electrical and mechanical faults across site equipment.\n, • Complete planned preventative maintenance activities to agreed schedules.\n, • Respond to breakdowns quickly and effectively to minimise downtime.\n, • Support continuous improvement and reliability projects.\n, • Maintain accurate maintenance records using the CMMS system.\n, • Follow safe systems of work including lock-off, isolation and permit procedures.\n, • Work closely with operations teams to improve equipment performance.\n, • Support statutory inspections, compliance activities and engineering standards.\n, • Identify spare parts requirements and improvement opportunities.\n, • Assist with equipment upgrades, installations and commissioning projects.\n\n \n Profile \n A successful Maintenance Engineer should have: \n\n • Proven experience in mechanical and electrical maintenance within an industrial or manufacturing environment.\n, • Strong problem-solving skills and the ability to work under pressure.\n, • Familiarity with health and safety regulations in engineering and manufacturing settings.\n, • A relevant qualification in engineering or a related field.\n\n Job Offer \n\n • £45,000 - £55,000 salary depending on experience.\n, • Shift premium where applicable.\n, • Company pension scheme.\n, • Annual leave entitlement.\n, • Life assurance cover.\n, • Employee Assistance Programme.\n, • Occupational health support.\n, • Employee discounts and benefits platform.\n, • Free on-site parking.\n, • Ongoing technical training and career development opportunities.\n, • Permanent role with a stable and growing business.\n\n If you're interested in this role, apply now. \n

Multi-Skilled Engineer \n\n • Location: Peterborough\n, • Job Type: Full-time\n, • Reports to: Engineering Manager\n\n Join our dynamic team as a Multi-Skilled Engineer, a critical role within our organization responsible for ensuring the efficient operation and maintenance of a variety of systems and equipment across multiple disciplines. This position is ideal for someone with expertise in mechanical, electrical, and electronic engineering, providing comprehensive support for our manufacturing, production, and facility operations. \n Day-to-Day of the Role: \n\n • Schedule and perform maintenance on all machinery, including servicing, repairs, and inspections, ensuring high standards and adherence to record-keeping and hygienic hand back to production.\n, • Operate and maintain service plant systems such as boilers, chilled water, air, and effluent treatment.\n, • Engage in the design and implementation of new systems and upgrades, including the installation and movement of existing machines.\n, • Collaborate with production operators in loss reduction and efficiency improvement activities.\n, • Follow Good Manufacturing Practices (GMP) and adopt a "clean as you go" culture.\n, • Comply with all company policies and procedures, ensuring a safe working environment.\n\n Required Skills & Qualifications: \n\n • Multi-skilled with a great team working ethic.\n, • Recognised engineering accreditation in electrical, with an optional mechanical qualification (e.g., recognised apprenticeship, ONC, City and Guilds, or 17th/18th edition IEE).\n, • Experience working in a UK retailer or BRCGS accredited food factory is preferred, but candidates from non-food backgrounds who can adhere to good food hygiene principles will also be considered.\n, • Ability to work independently, alongside skilled operators, and within a wider engineering team.\n, • Excellent communication skills, with the ability to listen and value the opinions of others.\n, • Understanding of the importance of accurate record-keeping for quality, food safety, and personal safety.\n\n Benefits: \n\n • Competitive salary and benefits package.\n, • Opportunities for professional development and training.\n, • A role that offers variety and the opportunity to work across multiple engineering disciplines.\n, • Canteen\n, • Company pension\n, • Employee discount\n, • Free parking\n, • Health & wellbeing programme\n, • Life insurance\n, • On-site parking\n

AC Engineer Peterborough £42,000-£50,000 + (OTE £65,000) + Paid Door to Door + Company Van + Pension + Minimal Call Out + Unlimited Overtime + Training Opportunities + Holiday + Pension + Expenses Paid Are an AC Engineer who's looking to join a well-established national company that offers unlimited overtime, while maintaining a genuinely non-corporate culture where every team member is valued? With a clear focus on additional on-site support, ongoing training and recognised qualifications, this is a business that genuinely invests in its employees and gives them the opportunity to develop their skills, increase their earnings and build a long-term career.In this role as AC Engineer, you'll work across a variety of commercial and industrial sites, including office blocks and warehouses, where no two days are the same. You'll be responsible for servicing, maintaining, diagnosing, repairing, AC and refrigeration systems, giving you the opportunity to apply and expand your technical skills in a hands-on environment.Your Role as AC Engineer Will Include: \n\n • Service and maintain air conditioning and refrigeration systems across commercial and industrial sites.\n, • Diagnose and repair AC and refrigeration equipment independently.\n, • Travel to sites across the UK, with occasional overnight stays as required.\n, • Participate in a minimal callout rota (approx. 1 in 8 weeks) with premium pay.\n\n The AC Engineer Will Need to Have: \n\n • F-Gas qualified\n, • 3+ years' experience in air conditioning or refrigeration (commercial/industrial)\n, • Valid UK Driving Licence\n\n Apply now or call for immediate consideration!AC Engineer, Air Conditioning, Refrigeration, HVAC, Technician, Commercial AC, Industrial, Service, Maintenance, Fan coil, ACU, Mobile, Fgas,

Job Title: AI Trainee Engineer – £45,000–£75,000 – Job Programme This is a self-funded programme that leads to employment, fees apply. Job Guarantee Complete the programme and get a job, or get your course fees back. Looking to start a career in AI Engineering? We are offering a structured pathway into AI Engineering, designed to help you enter one of the fastest-growing sectors in tech with no prior experience. This opportunity includes training, support, and access to our specialised recruitment support for job roles across the UK. No prior experience required. Train online at your own pace and become job-ready in as little as a few weeks. Our programme includes: • Official AWS Certified Cloud Practitioner certification • Training in Python, Machine Learning, and AI systems • Hands-on projects using real-world AI tools and technologies • Professional CV and LinkedIn support • Interview preparation • Dedicated recruitment support until placed • Personalised 1-1 tutor support • Hands-on projects to build your AI portfolio Flexible, affordable, achievable To make things easier, we offer flexible payment options, allowing you to spread the cost of your training over 12 months so you can get qualified without financial pressure. Salary expectations: • AI Engineer: £45,000 – £60,000 • Machine Learning Engineer: £60,000 – £75,000 • Progression into senior AI roles with higher earning potential We support you into employment We focus on outcomes, not just training. ITOL Recruit has over 15 years of experience supporting candidates into roles across AI, machine learning, and data science roles. From the beginning of your journey to the end, you are supported by qualified tutors, and at the end, our specialised recruitment team helps you secure your first job role. Apply now to get started.

Draughtsperson - Peterborough - 40/45k + benefits \n ALH Recruitment are looking to recruit a Draughtsperson with immediate effect for our client who continue to grow and dominate their market from their HQ based in Peterborough. \n Draughtsperson \n Working under own initiative, with support from their close-knit Project Engineering team, fulfilling “inception to completion” design and draughting requirements for food processing lines. \n Developing models and fabrication drawings. Sheet-metal formations and structural steelwork. Working to and delivering highly hygienic (food safe) design standards. \n Delivering the wider project needs includes:- \n\n • Site survey of operating areas\n, • Steelwork design, load bearing calculations, fabrication drawings.\n, • Access walkways and staircase design and fabrication drawings.\n, • Documented risk assessments for the specific solutions and the interacting layout.\n, • Process layout refinement and design of interconnecting transfer chutes etc.\n, • Identify foot-loadings for interaction with construction companies.\n, • Identify utility connection points for the process layout.\n, • Receive “as installed” layouts from the installing engineer and update as necessary.\n\n Our client has a developing range of process solutions. In the process of our company driving forwards, the ideal candidate will have experience in:- \n\n • Food machinery design\n, • Hygienic food-safe solutions\n, • Fabrication processes\n, • CE marking, machinery directive and guarding requirements\n, • Conversant with 2D & 3D\n\n Our client covers the following Industry sectors:- \n Snacks food manufacturing – high volume production lines \n Root crop processing \n Canning \n Coffee processing \n Project management of turn-key facilities \n Skills \n 3D SolidWorks trained and competent – industrial fabrication drawings \n Previous experience in equipment & steelwork design and fabrication techniques \n Minimum 3 years industrial experience \n HNC / HND qualification in engineering \n \n Dynamic, enthusiastic and flexible approach \n Willing to travel (occasional need for UK and foreign site surveys) \n Commercial awareness applied to designing - value engineering approach \n Excellent people skills and clear communicator with the ability to form strong team bonds \n Computer literate with working knowledge of the following:- \n SolidWorks (Weldments, sheet-metal, part modelling, piping, stress analysis) \n AutoCAD \n If you feel you have the skills and experience to step into this exciting Draighter/Design role, please apply below: \n

Design Engineer \n £35.04 - £37.04/hr Umbrella (Inside IR35) + 12 Month Contract + Global Business + Extension Potential \n Peterborough, commutable from Huntingdon, Stamford, Corby, Kettering, Cambridge, Wisbech, Spalding and surrounding areas. \n Are you a Design Engineer with both mechanical and electrical design experience looking to work on cutting-edge electrification projects within a highly innovative engineering environment? \n This is an exciting opportunity to join a specialist advanced development team responsible for transforming traditional diesel-powered machines into next-generation electrified demonstrator platforms. Working within small, agile engineering teams, you'll have the opportunity to take projects from concept through design, integration, prototype build and validation. \n You'll be involved in the development of low-volume prototype and demonstrator machines, working closely with design, build and validation teams to deliver practical engineering solutions at pace. This is a highly visible role offering significant ownership and the opportunity to see your designs rapidly become real-world machines. \n \n The Role: \n\n • Support concept and detailed design activities for electrified machine systems\n, • Develop engineering models, drawings and technical documentation using Creo\n, • Support machine integration, prototype build and validation activities\n, • Work closely with multidisciplinary engineering teams to solve technical challenges\n\n The Person: \n\n • Mechanical design experience within a product development environment\n, • Electrical design and integration experience\n, • Proficient using Creo to produce models and engineering drawings\n, • Background within automotive, off-highway, heavy equipment or industrial machinery sectors\n\n Desirable: \n\n • Electrification or EV project experience\n, • Prototype or demonstrator machine development\n, • Validation and testing exposure\n, • Cross-functional product development experience\n\n Reference Number: 278795 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Mechanical Maintenance Technician \n PeterboroughPermanent4 on 4 off Shift Pattern£51,486 (Inclusive of Shift Allowance)ASAP Start \n We're looking for an experienced Mechanical Maintenance Technician to join a busy manufacturing operation in Peterborough. \n This is a hands-on mechanical maintenance role where you'll be responsible for keeping production machinery running safely and efficiently. You'll carry out planned preventative maintenance, fault finding, breakdown repairs, machine adjustments and continuous improvement activities to minimise downtime and maximise production output. \n What You'll Be Doing \n\n • Carrying out planned preventative maintenance (PPM) on production machinery.\n, • Diagnosing and repairing mechanical faults and breakdowns.\n, • Responding to line stoppages and equipment failures.\n, • Completing machine repairs, adjustments and tooling changes.\n, • Supporting machinery performance improvements to increase efficiency and reduce waste.\n, • Using workshop machinery, tools and measuring equipment.\n, • Maintaining high Health & Safety standards at all times.\n, • Completing maintenance documentation and records accurately.\n\n What We're Looking For \n Essential \n To be considered, you'll need: \n\n • A Level 3 Mechanical Apprenticeship, NVQ Level 3 or equivalent qualification in Mechanical Engineering, Motor Vehicle, HGV, Plant or a related discipline.\n, • Hands-on experience maintaining and repairing mechanical machinery or equipment.\n, • Experience diagnosing and fixing mechanical faults and breakdowns.\n, • Planned preventative maintenance experience.\n, • Experience using workshop machinery and measuring equipment.\n, • A strong commitment to Health & Safety.\n, • A practical, can-do approach and strong problem-solving skills.\n\n Ideally You'll Have Experience With \n\n • Lathes.\n, • Milling machines.\n, • Welding equipment.\n, • Cutting equipment.\n, • Precision measuring tools.\n, • Machine repairs and adjustments.\n, • Tooling changes and machine changeovers.\n\n Highly Desirable \n\n • Maintaining manufacturing or production equipment.\n, • Working within a high-volume manufacturing environment.\n, • Identifying opportunities to improve output, quality and efficiency.\n, • Supporting continuous improvement initiatives.\n\n Suitable Backgrounds \n\n • Mechanical Maintenance Engineer\n, • Maintenance Technician\n, • Mechanical Technician\n, • Mechanical Fitter\n, • Production Maintenance Engineer\n, • Multi-Skilled Engineer (mechanically biased)\n, • HGV Technician with transferable industrial mechanical experience\n, • Vehicle Mechanic with proven machinery maintenance experience\n\n Apply Today and Make a Difference! \n Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. \n We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention. \n If you do not hear back after 5 working days, please assume that you have unfortunately been unsuccessful on this occasion. \n \n \n \n \n \n \n \n \n \n \n \n \n Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. \n By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser \n \n \n \n \n \n \n \n \n

Reports to: Field Operations Manager Take Your Engineering Career on the Road with Terberg DTSBuild, Repair, Diagnose, Excite\n Are you a skilled engineer who loves solving problems, working independently, and getting hands-on with specialist vehicles? At Terberg DTS, you'll work with some of the most advanced distribution tractors, Ro-Ro tractors, GSE equipment, and specialist vehicles in the industry, keeping our customers moving when it matters most. \n As a Mobile Service Engineer, no two days are the same. You'll travel to customer sites, diagnose faults, carry out repairs, complete inspections, and deliver first-class technical support while representing a globally respected brand. What You'll Be Doing\n\n • Servicing, maintaining and repairing Terberg and specialist vehicles at customer locations.\n, • Diagnosing mechanical, electrical and hydraulic faults using modern diagnostic equipment.\n, • Carrying out inspections and identifying wear, damage, and potential failures.\n, • Completing repairs safely, efficiently, and to manufacturer standards.\n, • Producing accurate service reports and repair recommendations.\n, • Managing van stock and ensuring parts are available when needed.\n, • Building strong relationships with customers through excellent service.\n, • Working independently while maintaining the highest safety standards.\n, • Participating in ongoing training and development to grow your skills.\nWhat You'll Bring\n\n, • Level 3 Vehicle Maintenance & Repair qualification (or equivalent).\n, • Strong fault-finding and diagnostic skills, particularly in auto-electrics.\n, • Experience working on HGVs, plant machinery, specialist vehicles, or similar equipment.\n, • Confidence using modern diagnostic systems.\n, • A proactive, self-motivated approach with excellent problem-solving skills.\n, • Strong communication skills and customer focus.\n, • Full UK Driving Licence.\nWhy Join Terberg DTS?Invest in Your Future\n\n, • Continuous technical training and development\n, • Opportunities to upskill and progress your career\n, • Access to apprenticeships and development programmes\nGreat Benefits Package\n\n, • 25 days holiday plus Bank Holidays\n, • Enhanced pension scheme\n, • 3x salary Death in Service benefit\n, • Company-funded Health Shield Medical Cash Plan\n, • 24/7 GP Anytime access\n, • & More!\nSupporting Your Wellbeing\n\n, • Employee Assistance Programme\n, • Occupational health support\n, • Health surveillance programmes\nExtra Perks\n\n, • Retail discounts and rewards platform\n, • Cycle to Work scheme\n, • Free independent mortgage advice\nReady for a Role That Keeps You Moving?\n If you're an experienced engineer looking for variety, autonomy, and the opportunity to work on industry-leading specialist vehicles, Terberg DTS could be your next great career move. \n Apply today and become part of a team that keeps vital industries moving. \n

Site Engineer General information City/town: Peterborough Job field: Construction External closing date: Monday, August 10, 2026 Type of contract: Permanent ID: 6537 Description and requirements At Skanska, we’re shaping the way we live, work and connect. As one of the world’s largest construction and development companies, we work together with customers, communities and partners to shape a better society. You will be working in the Infrastructure function working on our Anglian Water Project. Through our role in the @one Alliance, we’re helping Anglian Water deliver a 2.6 billion investment in vital infrastructure. From civil works to water treatment facilities, this programme strengthens environmental protection across the East of England - safeguarding water resources for generations to come. We are currently looking for a Site Engineer who will own site engineering delivery - driving safe, high-quality work, leading day-to-day assurance, and supporting junior engineers. As the Site Engineer, you will:Lead day-to-day site quality assurance, including surveying, setting out, inspections, and approvals.Work with cross-functional teams to solve construction challenges and keep works on programme, budget, and quality targets.Prepare temporary works briefs, red-line drawings, and 3-month lookaheads for your section of works.Apply policies, procedures, and legal requirements, with a strong focus on health, safety, and hazard minimisation.Maintain accurate site records and support coordination with engineering teams to resolve issues and deliver to spec, drawings, and digital models.We are looking for:Qualifications: HND or HNC / Civil Engineering Technician Level 4 with CAD and BIM proficiency.Strong problem-solving skills across both design and site environments.Competent in the use of robotic total stations and GPS surveying equipment.Excellent communication, collaboration, and stakeholder management skills.Health & Safety: 3-day First Aid, Site Safety Supervisor Training Scheme (SSSTS) and a role-specific CSCS card.What we offer: 24/7 digital GP service for you and your family Financial wellbeing and employee assistance Professional development Enhanced family benefits (including maternity, paternity, dependants and parental bereavement leave) Inclusion and Diversity We thrive through embracing differences as we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it The Skanska Way. Flexible working Where possible, we offer a range of flexible working options, and we would be happy to discuss this at the application stage if this is something you’d like to explore. Reasonable adjustments We want you to feel confident and supported throughout every stage of our recruitment process. If you need any adjustments to help you during your application, please contact us at recruitment@skanska.co.uk or call 0330 105 2000 - Option 5 & 1. Closing date We encourage you to apply as early as possible, as the closing date may be subject to change. If this role would be of interest, please click apply and join our team of 27,000 problem solvers and creative thinkers, where knowledge is our greatest creation. We share, listen and support your success - every step of the way.

Share your aviation engineering expertise and help develop the next generation of aircraft maintenance professionals. Join a respected EASA Part-147 approved training organisation delivering specialist aircraft type training across a diverse range of regional and business aircraft. \n \n CAA/EASA Approved Instructor \n Peterborough UK (or Home Based) with travel as required \n\n • Full Time or Part Time, Permanent or Contract\n, • Competitive salary dependent on experience\n\n \n Please note: you must be authorised to work in the UK \n Our client is an established EASA Part-147 Maintenance Training Organisation specialising in aircraft maintenance training, consultancy and type training services for the aviation industry. They deliver approved aircraft type training programmes and are seeking experienced aviation professionals to join their instructional team. \n This is an excellent opportunity for a qualified Aircraft Maintenance Engineer with instructional experience, or a desire to move into training and instructing, to contribute to the development of aviation professionals while working with a respected training organisation. \n \n Key Responsibilities \n\n • Deliver approved aircraft type training courses in accordance with EASA Part-147 requirements\n, • Prepare and deliver theoretical and practical training sessions\n, • Assess student competence and practical performance where authorised\n, • Maintain high standards of instructional delivery and student engagement\n, • Ensure compliance with regulatory requirements, approved training materials and organisational procedures\n, • Deliver training through classroom and virtual learning environments where appropriately approved\n, • Maintain accurate training records and associated documentation\n, • Participate in ongoing professional development and technical updating activities\n, • Travel to customer and training locations as required\n, • Support the continuous improvement of training programmes, course content and instructional standards\n\n \n Key Skills and Qualifications \n\n • Qualified Licensed Aircraft Maintenance Engineer\n, • Previous experience within an EASA Part-147 Maintenance Training Organisation is highly desirable\n, • Instructional Techniques Training certificate or recognised Train the Trainer qualification\n, • Strong understanding of EASA Part-147, Part-145 and Part-66 requirements\n, • Experience delivering technical training or a desire to move into an instructional role\n, • Excellent communication and presentation skills\n, • Good spoken and written English\n, • Computer literate with experience using digital training platforms\n, • Experience working on relevant aircraft types\n, • Current or recent aircraft maintenance experience on applicable aircraft types\n, • Ability to demonstrate aircraft type recency\n, • Willingness to travel within the UK and internationally when required\n, • Professional, organised and self-motivated approach\n\n \n Experience delivering or holding type approvals on one or more of the following aircraft would be essential: \n\n • Bombardier CRJ100/200\n, • Bombardier CRJ700/900/1000\n, • ATR 42 and ATR 72 Series\n, • De Havilland DHC-6\n, • Bombardier DHC-8-100/200/300\n, • Bombardier DHC-8-400\n, • Embraer EMB-135/145\n, • Embraer ERJ-170 Series\n, • Embraer ERJ-190 Series\n, • Embraer Phenom 100\n, • Embraer Phenom 300\n, • Embraer EMB-545/550\n\n \n If you are a qualified Aircraft Maintenance Engineer with a passion for sharing your knowledge and developing the next generation of aviation professionals, we would like to hear from you. Whether you are an experienced Part-147 Instructor or an engineer looking to move into a training role, this is an excellent opportunity to join a respected organisation operating within the aviation training sector. \n \n Our client welcomes applications from motivated professionals who can demonstrate the technical expertise, communication skills and commitment required to deliver high-quality aircraft maintenance training. \n \n How to apply: \n If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. \n \n You must be authorised to work in the UK. No agencies, please. \n Other suitable skills and experience includes Aircraft Maintenance Instructor, Aircraft Technical Trainer, Part-147 Instructor, Aviation Technical Instructor, Aircraft Maintenance Training Instructor, Licensed Aircraft Engineer, B1 Licensed Engineer, B2 Licensed Engineer, Aviation Training Specialist, Type Training Instructor, Technical Training Consultant, Aircraft Systems Instructor, Maintenance Training Assessor, Practical Assessor, Engineering Trainer, Aviation Engineering Instructor and Aircraft Maintenance Training Consultant.

Senior & Electrical Design Engineers \n £45-60k + 5% Pension, 25 Days Holiday, Overtime, Private Healthcare & Hybrid Working \n Peterborough. Ref: 25624 \n \n Ready to lead complex LV electrical design projects within some of the UK’s most critical infrastructure sectors? \n \n This is a fantastic opportunity to join one of the UK’s leading multidisciplinary engineering and infrastructure businesses, delivering advanced design and build solutions across Water, Power & Energy, Pharmaceutical, Nuclear and Food & Beverage industries. \n \n Ideal for an experienced LV Design Engineer looking to step into a senior-level role with leadership responsibility, this position offers the chance to mentor engineers, lead technically challenging projects and work within a highly supportive business focused on long-term career development. \n \n The Role: \n\n • Lead LV design activities across multiple engineering projects\n, • Support and mentor LV Design Engineers, providing technical guidance and development\n, • Review electrical schematics, calculations and technical documentation\n, • Work closely with Project Managers and Project Leads to ensure successful project delivery\n, • Attend client sites to carry out compliance reporting on existing LV Assemblies\n, • Lead complex site migration projects, supporting LV Engineers and site teams\n, • Deliver practical, compliant and client-focused LV engineering solutions\n, • Support risk mitigation and minimise operational downtime during project execution\n\n \n Requirements: \n\n • In-depth technical knowledge of LV Assemblies and MCC control panels\n, • Experience delivering safe, reliable and compliant LV design solutions\n, • Solid communication and leadership skills\n, • Collaborative and supportive approach to team and project delivery\n, • Passion for mentoring and developing junior engineers\n, • Ability to provide practical and customer-focused engineering solutions\n\n \n Why Join? \n\n • Hybrid working available following probation\n, • Private healthcare, overtime and enhanced pension contributions\n, • Strong focus on training, development and long-term career progression\n, • Inclusive and supportive team culture\n, • Excellent benefits package including additional holiday purchase scheme, life assurance and well-being support\n, • Opportunity to work on major infrastructure and industrial projects across multiple sectors\n\n \n Benefits Include: \n\n • 25 days holiday plus bank holidays\n, • Option to purchase up to 5 additional holidays\n, • 5% employer pension contribution\n, • Private Medical Insurance\n, • Life Assurance\n, • Employee Assistance Programme\n, • Enhanced family leave policies\n, • High street and online shopping discounts\n, • Annual eye tests and flu vouchers\n, • Company sick pay\n\n \n This role is located in Peterborough, easily commutable from Stamford, Bourne, Huntingdon and Market Deeping. For further information call Sharon Hill on: 01902212000 or 07764208419. Email: sharon.hill@automationexperts.co.uk \n

Business Support Manager \n 40 hours per week Mon-Fri \n Salary: £37.5K pa \n Based at: Cambridge & Peterborough Service Centre (PE29) \n \n Job purpose: \n The Business Support Manager is responsible for overseeing business support functions across the contracts based at their dept, ensuring effective coordination of activity, reporting, and stakeholder engagement. \n \n The role supports operational delivery through capacity planning, performance monitoring, audit activity, and customer service oversight, while acting as the primary point of contact for the Commissioning Authority concerns or issues. The postholder will work as part of the Senior Management Team at Cambridge & Peterborough Service Centre. \n \n Key Responsibilities: \n Line Management \n\n • Provide direct line management to the Customer Service Team.\n, • Set objectives, monitor performance, and support development of direct reports.\n, • Ensure team structure and resource aligns with service requirements.\n\n \n Capacity and Activity Management \n\n • Manage booking coordination for all activity for Field Service Engineer (FSE) rounds.\n, • Ensure capacity is effectively utilised and aligned with demand.\n, • Identify capacity risks and escalate where required.\n\n \n Stakeholder Management \n\n • Act as the first point of contact for the Commissioning Authority.\n, • Maintain effective relationships with commissioners and stakeholders.\n, • Support responses to commissioner queries.\n\n \n Reporting and Performance Monitoring \n\n • Coordinate monthly, quarterly, and annual reports.\n, • Collate and validate data.\n, • Monitor KPIs and escalate concerns.\n, • Manage people performance including absence, training, and engagement.\n\n \n Audit, Compliance and Customer Service Quality \n\n • Conduct customer service audits and call listening.\n, • Identify improvement areas and ensure compliance.\n\n \n Management Team Responsibilities \n\n • Contribute to management team planning and development.\n, • Provide insight for decision-making.\n, • Lead and support recruitment across the service\n, • Promote compliance and continuous improvement.\n\n \n Experience \n\n • Management or supervisory experience\n, • Performance monitoring and reporting\n, • Contract or service delivery environment\n, • Audit processes\n\n \n Attributes \n\n • Detail-oriented\n, • Ability to prioritise\n, • Team collaboration\n, • Proactive problem-solving\n\n \n Skills and Knowledge: \n\n • Organisation and coordination\n, • Data analysis\n, • Capacity planning understanding\n, • Communication and stakeholder engagement\n\n \n Service user/other agency/public engagement and involvement: \n Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. \n \n The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company’s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. \n \n This job description shall not limit your role, you will also be expected to carry out any other duties that you manager feels are within your capabilities and skill set. The above may not cover everything involved in the position but indicates the size and scope of the role and may be subject to change as the role develops. \n

Service Controller \n \n Hours: 40 hours per week \n Working Hours: Rotational coverage required between 7:30am and 5:00pm \n \n Overview \n We are seeking an organised and customer-focused Service Controller to join a busy customer support team. The successful candidate will be responsible for coordinating service activities, scheduling field-based engineers, managing customer enquiries, and ensuring maintenance and repair requests are handled efficiently. \n \n The ideal candidate will have excellent customer service skills, a strong technical understanding of specialist vehicles, and extensive geographical knowledge to effectively coordinate engineers and respond to customer requirements. \n \n This role requires strong planning, communication, and problem-solving skills, with the ability to prioritise workloads and deliver excellent customer service in a fast-paced environment. \n \n Benefits \n\n • Competitive salary\n, • Company pension scheme\n, • Life assurance\n, • Annual leave entitlement plus bank holidays\n, • Ongoing training and development opportunities\n, • Career progression prospects\n, • Supportive team environment\n\n \n Key Responsibilities \n\n • Respond to customer enquiries via telephone and email regarding maintenance, servicing, and equipment breakdowns.\n, • Log service requests accurately and ensure they are actioned within agreed timescales.\n, • Schedule field service engineers, taking into account location, workload, priority, and customer commitments.\n, • Maximise engineer utilisation and support a high first-time fix rate.\n, • Prioritise and coordinate reactive, planned, and contract service activities.\n, • Communicate technical information to customers in a clear and user-friendly manner.\n, • Monitor ongoing jobs and provide customers with updates on progress.\n, • Issue quotations and follow up with customers regarding outstanding proposals.\n, • Contact customers after service visits to ensure satisfaction and identify any additional requirements.\n, • Raise and process service-related invoices within agreed deadlines.\n, • Maintain accurate service records and documentation.\n, • Coordinate parts requirements for engineers and ensure materials are available when required.\n, • Monitor outstanding parts orders and proactively update customers on progress.\n, • Work closely with internal departments to ensure efficient service delivery.\n\n \n Skills, Experience and Qualifications \n \n Essential \n\n • Previous experience within a service coordination, service desk, scheduling, planning, or workshop administration role.\n, • Strong organisational and administrative skills.\n, • Experience coordinating engineers, technicians, or field-based personnel.\n, • Excellent communication and customer service skills.\n, • Ability to work effectively in a fast-paced environment and manage competing priorities.\n, • Good IT skills, including Microsoft Office applications.\n, • Ability to remain calm and professional under pressure.\n, • Good standard of education, including English and Maths.\n\n Desirable \n\n • Technical or engineering knowledge gained through work experience or formal qualifications.\n, • Experience within engineering, construction equipment, plant, automotive, commercial vehicle, machinery, or industrial sectors.\n, • Experience using ERP, CRM, or service management systems.\n, • Knowledge of SAP or similar business systems.\n, • Understanding of service contracts and service level agreements (SLAs).\n\n \n Personal Qualities \n\n • Professional and dependable.\n, • Strong communicator with a confident telephone manner.\n, • Positive and proactive approach.\n, • Highly organised with excellent attention to detail.\n, • Practical and solutions-focused.\n, • Able to work independently and use initiative.\n, • Flexible and adaptable.\n, • Comfortable building relationships with customers and colleagues at all levels.\n, • Motivated and committed to delivering excellent service.\n, • Trustworthy and able to handle confidential information appropriately.\n, • Team player with a collaborative approach.\n\n

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Supporting a diverse portfolio of major UK and international clients across the maritime, defence, energy and transport sectors, our 100-strong UK Ports & Maritime team forms part of a global network of more than 750 specialist maritime engineers. Together, we deliver world-class design and engineering solutions across commercial ports, bulk terminals, naval bases, breakwaters and coastal defences, dredging and reclamation schemes, marine offloading facilities, and seawater intake and outfall infrastructure. Due to sustained growth and continued investment, a new role is being created for an experienced Project Design and Engineering Manager to join our Ports & Maritime team. Working at the forefront of maritime infrastructure design, you will lead multi-disciplinary engineering teams throughout the project lifecycle, from feasibility and concept development through FEED, detailed design, procurement support, construction, commissioning and handover. Responsible for managing design programmes, engineering deliverables, technical risk, interfaces and change control throughout the project lifecycle, your remit will include • Provide strategic Engineering and Design leadership and strategy during bids, tenders and project development activities., • Be recognized as project engineering and design focal point for major maritime infrastructure projects., • Drive the development of innovative, practical and sustainable engineering solutions that meet client, operational and regulatory requirements., • Embed health, safety and environmental considerations into all engineering and design solutions., • Ensure effective integration across civil, structural, geotechnical, marine, mechanical and Electrical functions., • Ensure constructability, maintainability and reliability across the whole asset lifecycle., • Support engineering teams in resolving complex technical challenges arising during design development and construction., • Promote innovation in digital engineering, sustainability, climate adaptation and low-carbon infrastructure design., • Proven experience in Design Management and Engineering Leadership on complex infrastructure projects., • A strong technical background within civil, structural, marine or related engineering disciplines., • Experience managing FEED, detailed design and design assurance processes., • Demonstrable success leading diverse engineering teams and coordinating multiple technical disciplines., • Collaborative stakeholder engagement skills with clients, contractors, regulators and project partners., • Chartered Engineer status., • A passion for technical excellence, innovation and developing sustainable infrastructure solutions. If you're ready to shape the future of ports and maritime infrastructure by leading the development and delivery of technically robust, sustainable and resilient engineering solutions that create lasting value for clients and communities worldwide, we'd love to hear from you. Joining Jacobs not only connects you locally but globally. Our values stand on a foundation of safety, integrity, inclusion and belonging. We put people at the heart of our business, and we truly believe that by supporting one another through our culture of caring, we all succeed. We value positive mental health and a sense of belonging for all employees. With safety and flexibility always top of mind, we’ve gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You’ll uncover flexible working arrangements, benefits, and opportunities, from well-being benefits to our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place. No matter what drives you, you’ll discover how you can cultivate, nurture, and achieve your goals – all at a single global company. Find out more about life at Jacobs. We aim to embed inclusion and belonging in everything we do. We know that if we are inclusive, we’re more connected and creative. We accept people for who they are, and we champion the richness of different perspectives, lived experiences and backgrounds in the workplace, as a source of learning and innovation. We are committed to building vibrant communities within Jacobs, including through our Jacobs Employee Networks, Communities of Practice and our Find Your Community initiatives, allowing every employee to find connection, purpose, and belonging. Find out more about our Jacobs Employee Networks here. Jacobs partners with VERCIDA to help us attract and retain talent from a wide range of backgrounds. For greater online accessibility please visit https//www.vercida.com/uk/employers/jacobs to view and access our roles. As a disability confident employer, we will interview disabled candidates who best meet the criteria. We welcome applications from candidates who are seeking flexible working and from those who may not meet all the listed requirements for a role. We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work. Your application experience is important to us, and we’re keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support. #J-18808-Ljbffr

Think of it as the stage between: Apprentice (learning basics) Improver (building practical competence) Qualified Engineer As a Lift Service Improver, you’ll support experienced engineers in delivering planned maintenance, minor repairs, and safety inspections across a variety of lift sy

Amazon is seeking Site Process Engineers to work in the EUCF Process Engineering (EUCF PE) team. The Site Process Engineer is an onsite position and will be based in EUK1.The Site Process Engineer works alongside with the FC Senior Leadership Team, while keeping high collaboration with EUCF PE functions. This role is responsible to deploy initiatives, build networking and relationship in the FC and drive compliance for the initiatives within an assigned timeline. The Site Process Engineer initiates and implements EU wide improvement activities. This role requires the ability to demonstrate ownership for initiatives, understand the initiatives in details, and influence to deliver meaningful results translating to tangible productivity and efficiency gains in the FC. Key job responsibilitiesThe Process Engineer leads Back to Basics initiatives by identifying top opportunities through analysis of bottom 50% processes, comparing metrics against EU FC benchmarks, and implementing improvement plans with Operations Management. They oversee FC improvement programs, conduct deep-dive analysis of process performance, and manage action plans while collaborating with central PE functions and regional Site PEs for best practices and variation reduction.In continuous improvement, they drive network best practice implementation, strengthen innovation frameworks, and ensure significant projects ($10M+ savings) are properly submitted through OP1 Project Intake. They own the deployment of EU network initiatives, ensuring timely execution and compliance while supporting tests and pilots.Partnership with FC Operations is maintained through daily Gemba walks, weekly LSC Meetings with Leadership Teams, and building strong relationships with Site Leaders and Senior Management. They provide support for process-related ad hoc tasks (limited to 10% of time) and may lead expanded EU Projects across multiple FCs.During Q4, they integrate with the site management operational team. The role requires 0-10% travel within their area of responsibility, subject to business needs.About the teamThe EUCF PE team leads process stabilization, standardization, and continuous improvement across the EU Customer Fulfilment Network. They establish best-in-class performance standards, implement technological advancements, and enhance operational leaders' technical knowledge. The team equips operations with expertise to deliver technology and process improvements while reducing performance variation between shifts, buildings, and regions. Working collaboratively with Central Teams, they prioritize resources to improve process metrics across all paths.Basic qualifications- Bachelor's degree in Engineering, Operations Management, Supply Chain, or related technical field- Minimum 3 years of experience in operations or process improvement- Experience with data analysis and metrics tracking- Project management experience- Proficiency in Microsoft Excel- Basic understanding of process improvement methodologies- Ability to travel 0-10% within the region- Flexibility to work in shifts when requiredPreferred qualification - Master's degree in relevant field- Six Sigma certification (Green Belt or higher)- 5+ years in operations management or process engineering- Experience in warehouse/fulfillment operations- Leadership experience in a fast-paced environment- Advanced data analysis tools knowledge- Experience with Lean methodologies- Strong stakeholder management abilities- Experience influencing without direct authority- Track record of leading cross-functional projects- Experience in continuous improvement initiatives- Experience with process documentation and standardizationAmazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice () to know more about how we collect, use and transfer the personal data of our candidates.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Senior Process Engineer General information City/town: Peterborough Job field: Construction External closing date: Monday, August 10, 2026 Type of contract: Permanent ID: 6536 Description and requirements At Skanska, we’re shaping the way we live, work and connect. As one of the world’s largest construction and development companies, we work together with customers, communities and partners to shape a better society. You will be working in the Infrastructure function working on our Anglian Water Project. Through our role in the @one Alliance, we’re helping Anglian Water deliver a 2.6 billion investment in vital infrastructure. From civil works to water treatment facilities, this programme strengthens environmental protection across the East of England - safeguarding water resources for generations to come.We are currently looking for an Senior Process Engineer who will deliver projects safely, on time, and sustainably - driving efficiency and strong performance without compromising governance. As the Senior Process Engineer, you will:Provide clear technical leadership and guidance to Process Engineers across the full project lifecycle.Review and assure process design deliverables, ensuring they are fit for purpose, compliant, and aligned to project outcomes.Work closely with multidisciplinary teams to manage design quality and deliver to programme, cost, and quality targets.Validate key process outputs including mass balances, sizing, hydraulics, PFDs, control philosophies, and P&IDs/3D models to ensure safety and compliance.Support design queries, supplier inputs, and team development while championing health, safety, innovation, and best practice.We're looking for: Degree qualified in Engineering, or able to demonstrate equivalent experience gained in a relevant role.Proven experience working on water sector assets and capital delivery projects.Strong knowledge of relevant regulations, standards, and industry codes of practice.Experience mentoring, coaching, and developing junior engineers.Chartered status, or actively working towards professional chartership.What we offer: 24/7 digital GP service for you and your family Financial wellbeing and employee assistance Professional development Enhanced family benefits (including maternity, paternity, dependants and parental bereavement leave) Inclusion and Diversity We thrive through embracing differences as we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it The Skanska Way. Flexible working Where possible, we offer a range of flexible working options, and we would be happy to discuss this at the application stage if this is something you’d like to explore. Reasonable adjustments We want you to feel confident and supported throughout every stage of our recruitment process. If you need any adjustments to help you during your application, please contact us at recruitment@skanska.co.uk or call 0330 105 2000 - Option 5 & 1. Closing date We encourage you to apply as early as possible, as the closing date may be subject to change. If this role would be of interest, please click apply and join our team of 27,000 problem solvers and creative thinkers, where knowledge is our greatest creation. We share, listen and support your success - every step of the way.

Job No. BBUK20781 Senior Process Engineer - Peterborough Highways Design Engineering About the role Senior Process EngineerLocation: Norwich or Peterborough (Hybrid working with site visits as required)Balfour Beatty play a key role as part of the {(6) Anglian Water's @one Alliance: Overview | LinkedIn} @Anglian Water’s one Alliance. The Alliance is a ground-breaking collaboration between Anglian Water and eight industry-leading partners: Balfour Beatty, Barhale, Binnies, MMB, MWH Treatment, Skanska and SWECO. And together, we deliver around 40% of Anglian Water’s capital investment programme.As we progress through AMP8 – our most ambitious asset management period to date – we’re delivering nature-based and sustainable infrastructure, from wetlands to urban drainage schemes, setting new benchmarks for environmental performance.We are currently recruiting for a Senior Process Engineer to join our growing Engineering team within the @one Alliance.As a Senior Process Engineer within one of Anglian Waters four business units, you will provide technical leadership and direction to process engineers, ensuring that process design deliverables are thoroughly checked, fit for purpose, and meet all required standards and project outcomes.This is an exciting opportunity to work on some of the UK's most significant water infrastructure projects while developing your career within a collaborative and forward-thinking alliance environment. What you'll be doing What You’ll Be Doing:Lead and manage quality through the process design workflow to deliver projects on time, within cost, and to quality standards.Review mass balances, process sizing, hydraulic calculations, P&IDs, process flow diagrams, and other design documentation to ensure technical accuracy and compliance.Check construction site design queries and change requests to provide prompt, accurate responses and maintain design integrity.Support Project Design Managers with design planning and stakeholder engagement for process design acceptance.Provide technical input for supplier contracts and deliverables review.Champion health, safety, and welfare, ensuring all designs comply with process standards and hazardous area regulations (DSEAR).Mentor and develop junior engineers, fostering professional growth and promoting best practice.Embrace innovation and digital technologies to drive continuous improvement and reduce carbon impact in design.Participate in wider Anglian Water initiatives such as HAZOPs, technical standards forums, and emergency response activities. Who we're looking for About YouWe’re seeking a proactive and experienced Senior Process Engineer with strong leadership and technical skills. Ideally, you will have:An engineering degree (Chemical, Mechanical, Process Engineering) or equivalent experience.Chartered status or working towards chartership.Extensive experience within the water sector, particularly process design and capital delivery projects.Thorough knowledge of relevant regulations, standards, and environmental requirements.A proven track record of mentoring and developing junior engineers.Experience in a Design & Build environment is advantageous but not essential.Strong leadership, communication, and decision-making abilities with a collaborative approach.A genuine commitment to sustainability and reducing the environmental impact of engineering solutions.Depending on your skills, experience, and interests, you could be aligned to one of Anglian Waters four business units:Place Based ThinkingThe Place Based Thinking team delivers some of the largest and most complex projects across the @one Alliance. Made up of six Senior Project Manager teams, we oversee 19 catchments, covering key sites such as Whitlingham, Flag Fen, Great Billing, Cotton Valley, Bedford, Colchester, and Ipswich Cliff Quays. These projects involve managing all parts of the network from rising and gravity mains, pumping stations, high spilling overflows, and water recycling centres.WaterThe Water Business Unit provides strategic support across the clean water network, covering both system performance and infrastructure planning. We assess the future hydraulic state of the network in response to population growth and increased demand, support the design and delivery of capital and infrastructure schemes to ensure hydraulic resilience, and work with optimisation teams to enhance overall network efficiency.Water Recycling (East and West)The Water Recycling Business Unit, split into East and West regions, is responsible for the collection, conveyance, and treatment of wastewater across an extensive network. We operate over 76,000 km of sewerage infrastructure and 1,163 treatment centres, ensuring safe and sustainable discharge to the environment while driving innovation and environmental performance. Why work for us Day in, day out, our teams deliver some of the UK’s most ambitious, exciting and meaningful projects; developing, building and maintaining the vital infrastructure that supports national economies and strengthens communities.Why join us?As if contributing to and supporting work that makes life better for millions wasn’t rewarding enough, we offer a full range of benefits too. You’ll have the freedom to shape the package that’s right for you and your life. Here are some of our key benefits:- Smart working, giving you more flexibility such as staggered start and finish times, with up to 40% remote working, where roles allow.- 25 days paid annual leave (pro rata)- Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leave- Pension, share incentive plan, volunteering leave, recognition schemes and much more… About us Balfour Beatty’s Highways business delivers major schemes including motorway upgrade programmes, complex national infrastructure projects and regional investment programme works for National Highways. We have a strong orderbook and a positive pipeline of opportunities, we put the road user, at the heart of everything we do. We work safely, reduce carbon emissions and added social value to the communities within which we work.Diversity and inclusionAt Balfour Beatty we believe that diversity and inclusion are essential components of any successful, happy workplace. Through our Value Everyone Diversity and Inclusion Strategy and Action Plan, we are growing our diverse workforce and developing our inclusive culture where everyone is able to thrive and reach their full potential, regardless of their identity or background. To find out how we are making this a reality, visit To help and support us with our desired commitment to create an inclusive culture we are members of WISE, enei, Business Disability Forum and the Association for Black and Minority Ethnic Engineers (AFBE). In 2020, we signed the Audeliss and Involve Open Letter to demonstrate our commitment to taking key long term and sustainable actions on Black Inclusion. Balfour Beatty is also a Gold Award holder in the Ministry of Defence 'Employer Recognition Scheme' and actively encourage applications from Armed Forces personnel, veterans and reservists.As a Disability Confident Employer, we are committed to working with people who have disabilities and long-term health conditions to remove barriers for them in obtaining employment. We are also committed to offering applicants with a disability an interview if they meet the minimum requirements for the role. For more info, visit: We are looking to continually improve our resourcing process and ensure that it is fair and inclusive for all. If you have any feedback on the process, please share this with us at: candidaterecruitmentqueries@balfourbeatty.comShow moreShow less

Career Area:ProcurementJob Description:Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do – but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here – we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it.Job Title: Supplier Development EngineerSalary starting from 57,737 (depending on level of experience)Location: Peterborough, Stafford or PeterleeBenefits: 25 days annual leave, Up to 12% BonusContributory pension scheme - Caterpillar will double the employee's contribution Up to 10%Contributory share scheme - Caterpillar will match 50% of the employee's contribution.Optional flexible benefits including access to health and dental care plans, EV car lease, holiday purchase.The OpportunityWe are seeking an experienced Supplier Development Engineer to join our team, to provide on-site assistance & leadership to Caterpillar’s supply base in the execution of Advanced Product Quality Planning (APQP), the implementation of process control and the deployment of a continuous quality improvement processes. You will ensure that suppliers can meet corporate and business unit requirements for certification and quality of purchased material.What You Will DoWorking with suppliers to ensure that robust process controls are in place to prevent nonconformities, to continuously monitor supplier’s key manufacturing processes and quality management system for improvement opportunities and to assist suppliers with Advanced Product Quality Planning (APQP) activities to ensure production readiness for New Product Introduction (NPI).The SDE is responsible for the supplier’s processes from design concept to the end of product life (cradle to grave), including the following activities:Assess and develop supplier quality management systems, process capability, and manufacturing readiness, including people, training, tooling, and equipment.Lead supplier quality activities for new product introduction, ensuring APQP and PPAP requirements are completed and approved.Review and approve quality documentation, including PFMEAs, Control Plans, MSA/Gage R&R, and corrective action plans.Conduct supplier audits, capability assessments, and evaluations to verify compliance, process control, and quality standards.Manage supplier process changes and ensure timely implementation of Process Change Notifications (PCNs).Support suppliers in resolving quality issues through robust root cause analysis, corrective actions, and continuous improvement initiatives.Drive supplier performance improvements through quality metrics, performance reviews, and targeted development plans.Partner with suppliers to implement Lean principles and build sustainable quality excellence across the supply base.Provide technical support during product launches and manufacturing start-up activities.What You Will HaveEffective Communications: Understanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working Knowledge:Problem Solving: Knowledge of approaches, tools, techniques for recognizing, anticipating, and resolving organizational, operational or process problems; ability to apply knowledge of problem solving appropriately to diverse situations.Level Extensive Experience:Experience of applying 8D process or other structured problem-solving techniques in a manufacturing environmentProcess Improvement: Understanding and insight into evaluating current product quality and production methods and ability to maintains focus on the continuous improvement of processes, products and services.Level Extensive Experience:Quality Orientation: Knowledge of quality management methods, tools, and techniques; ability to create and support an environment that meets the quality goals of the organization.Level Extensive Experience:Experience driving quality standards and process compliance across engineering supplier networks to ensure consistent delivery and performance.Production Part Approval Process (PPAP): Knowledge of Production Part Approval Processes (PPAP) elements, submissions, and objectives; ability to determine whether a supplier can manufacture products that meet the quality requirements and standards of their customers consistently.Level Extensive Experience:Sound knowledge and demonstrated experience of APQP, including the PPAP process, FMEA’s, control plans, process flow, GR&R, and capability studies.Manufacturing Standards, Procedures and Policies: Knowledge of organizational standards, procedures and policies in manufacturing activities; ability to plan, guide, and monitor manufacturing processes for compliance.Level Extensive Experience:Ability to read engineering drawingsSupplier Manufacturing Management: Knowledge of processes and methods to effectively manage business relationships and transactions with suppliers of raw materials or product components; ability to apply related knowledge, experience and skills into real practice.Level Extensive Experience:Supplier Evaluations and Certification: Knowledge of supplier evaluations and certification; ability to identify the methods, tools and documentation for evaluating, selecting and certifying vendors, suppliers and partners.Level Extensive Experience:Top Candidates will demonstrateExperience working with suppliers.Project management experience.Material metallurgical experienceExperience of working with high volume electronic manufactures Measurement techniquesAdditional informationWhen not travelling to supplier facilities, you will be based in the office full time.This role can be based from Peterborough, Stafford or PeterleeAbout CaterpillarCaterpillar Inc. is the world’s leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For over 100 years, we’ve been helping customers build a better, more sustainable world and are committed and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed.NB. The panel cannot make assumptions when shortlisting therefore please demonstrate your qualifications and experience on your CV relevant to the criteria outlined. Pending the number of applications, the criteria for the position may be enhanced to facilitate shortlisting. This position requires working onsite five days a week.Posting Dates:August 14, 2026 - August 30, 2026Caterpillar is an Equal Opportunity Employer. Qualified applicants of any age are encouraged to applyNot ready to apply? Join our Talent Community.SummaryLocation: Peterborough, United Kingdom; Stafford, United Kingdom; Peterlee, United KingdomType: Full time

Senior Civil Engineer General information City/town: Peterborough Job field: Construction External closing date: Monday, August 10, 2026 Type of contract: Permanent ID: 6535 Description and requirements At Skanska, we’re shaping the way we live, work and connect. As one of the world’s largest construction and development companies, we work together with customers, communities and partners to shape a better society. You will be working in the Infrastructure function working on our Anglian Water Project. Through our role in the @one Alliance, we’re helping Anglian Water deliver a 2.6 billion investment in vital infrastructure. From civil works to water treatment facilities, this programme strengthens environmental protection across the East of England - safeguarding water resources for generations to come. We are currently looking for an Senior Civil Engineer, who will deliver projects safely, on time, and sustainably - driving efficiency and strong performance without compromising governance. As the Senior Civil Engineer, you will: Deliver a diverse portfolio of water recycling and water supply projects that make a real impact.Lead, coach, and develop junior engineers, building capability and future talent across the team.Drive outcome-focused, low-carbon solutions that protect nature and harness digital innovation.Build strong professional networks across the @one Alliance and its wider partner community.Work collaboratively with multidisciplinary teams including Project Managers, Quantity Surveyors, Procurement, and Construction Managers to achieve successful project outcomes. What you'll bring to the role: Degree qualified in Civil Engineering, or able to demonstrate equivalent knowledge through relevant industry experience.Ideally chartered, or actively working towards professional chartership.Strong practical civil design experience, preferably within the water or wastewater sector.Proven ability to mentor, coach, and develop junior engineers.Good understanding of modular construction methods, processes, and best practice. What we offer: 24/7 digital GP service for you and your family Financial wellbeing and employee assistance Professional development Enhanced family benefits (including maternity, paternity, dependants and parental bereavement leave) Inclusion and Diversity We thrive through embracing differences as we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it The Skanska Way. Flexible working Where possible, we offer a range of flexible working options, and we would be happy to discuss this at the application stage if this is something you’d like to explore. Reasonable adjustments We want you to feel confident and supported throughout every stage of our recruitment process. If you need any adjustments to help you during your application, please contact us at recruitment@skanska.co.uk or call 0330 105 2000 - Option 5 & 1. Closing date We encourage you to apply as early as possible, as the closing date may be subject to change. If this role would be of interest, please click apply and join our team of 27,000 problem solvers and creative thinkers, where knowledge is our greatest creation. We share, listen and support your success - every step of the way.

Maintenance Engineer Panama Shift Pattern , rotating days and nights, 12h shifts, 6am - 6pm, 6pm - 6am This is a great opportunity to join our team, bringing to life our future condiments manufacturing facility, located in Peterborough, UK. Our vision is to build a sustainable, innovative McCormick factory-of-the-future to support our Flavour Solutions customers. MAIN RESPONSIBILITIES Continuously assess company plant and equipment for efficiency, purpose and implement improvements so that output will be optimised, inform of non-compliances. Use line monitoring, fault finding and problem-solving systems/techniques to maximise utilisation of all company plant and equipment, by minimising downtime through scheduled, planned, or ad hoc maintenance, and continuous improvement. Help reduce the companys "Carbon Footprint" by efficient utilisation of resources, i.e.: Energy Usage, Waste Disposal, etc. Liaise and work closely with the production team enabling timely start-up of plant. Work safely, complying with the obligations under Health and Safety regulations. Study production schedules and estimates work hour requirements, for completion of job assignment. Confer with production, materials supervisors, and process technicians to coordinate activities. Prepare estimates, requisitions, and inspection routes for equipment. Manage small projects and assists with major projects when required. Regularly carry out audits for compliance to AIB / EFSIS / GMP Standards. Understand own responsibilities regarding food safety legislation, including HACCP, and carry out work accordingly. Work with Production and Quality teams to improve and develop operating practices to enhance product quality and customer service. Ensure full compliance with Company Quality, Food Safety, Health & Safety and Environmental requirements. Organise work activities to ensure the no contamination of product. Ensure the safety of our product is not compromised in any way. Coordinate the activities of outside Engineers, Contractors, and Vendors. Complete all work undertaken, in a timely manner, and achieve deadlines. Have a flexible attitude towards all Engineering duties including providing cover for other Engineering functions and peers. CANDIDATE PROFILE Minimum NVQ Level 3 or equivalent in relevant Engineering Discipline. Working experience in production environment (food or consumer products industry preferred), supported by a good track record of acquiring Engineering skills, continuous learning. A good understanding of inter-discipline skills and multi-skilling. A solid grounding in food handling safe practices. An awareness of HACCP, PUWER, LOLA and COSHH. Have a working knowledge of AC/DC drives and associated control equipment. Good written and verbal communication skills ability to deal with both suppliers and internal customers. PC literate (Experience of MS Word, Lotus Notes and Excel Spreadsheets). Problem solving and fault-finding skills. Able to interpret schematic diagrams. Able to work on own initiative and highlight continuous Improvement opportunities. Positive and enthusiastic attitude towards work and colleagues, able to work in a team. Possess the energy and drive to get things done in a timely manner. Good understanding of various types of PLC including Allen Bradley, Schneider, and Siemens. Have a desire to upskill and learn. Agencies: McCormick as needed will work with external recruitment vendors through our Agency Portal. Unless previously contacted, McCormick does not accept unsolicited resumes from external recruiting agencies. McCormick & Company is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, colour, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As users of the disability confident scheme, we guarantee to interview all disabled applicants who meet the minimum criteria for the vacancy/ies. TPBN1_UKTJ

Sureserve Sureserve mission is to be the trusted partner of choice to the social housing and related public sector in delivering essential and affordable heating, energy savings, and compliance solutions. We are playing a key and progressive role in decarbonisation, always delivering for customers, employees, residents and the environment with safety, integrity and respect at the forefront of everything we do. We provide trusted high-quality solutions that focus on energy efficiency, warm, safe, and compliant homes, and an improved quality of life for residents. With a Nationwide reach, regional and local relationships and expertise, and commitment to excellent client service we are set up to be a trusted partner for now and the future. Sureserve Compliance Central We are a national company offering market leading heating & hot water solutions from a network of regional offices across the East of England and the Midlands, strategically positioned to ensure comprehensive coverage and uncompromised access to our clients We are looking for a skilled and reliable, gas qualified Installation Engineer to carry out the install of domestic & hot water systems. Overview of Role: The Installation Engineer will be responsible for the installation and maintenance of gas heating and hot water solutions, ensuring safety measures are met, and providing professional advice to our clients on appliance usage. The right candidate will focus on delivering excellent customer service and maintaining a high standard of work. Key Responsibilities With a friendly and professional attitude, you will need to build strong relationships with our clients and their tenants, ensuring all works meet the required standards. Carry out heating and hot water installations works on properties across the region. Ensure high levels of customer care in dealing with clients and tenants to meet the required quality standards. Key Attributes / Requirements CCN1 qualified gas installation experience in domestic heating and hot water systems. It is important that we complete all the appropriate criminal and reference checks before you start working with us. What We Offer: Company vehicle and fuel card Uniform & mobile device Support provided for professional qualifications Employee wellbeing programme, occupational health support, telephone support- counselling for staff Service level awarded annual leave Enhanced maternity & paternity packages Dental/Healthcare cash plan Cycle to Work Scheme Electric Vehicle Leasing Scheme Gender Equality Working Group Sureserve Academy- a platform for development, career progression Employee Voice Programme Social activities for all of our Teams Sureserve Legends- celebrating the fantastic ways in which our employees live our values. Sureserve is committed to creating a diverse and inclusive workplace. We celebrate individual differences and believe that they contribute to our collective success. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contact Successful applicants will be subject to eligibility checks including the right to work in the UK and DBS checks. Join us in our mission to deliver excellence across the UK TPBN1_UKTJ

Mechanical Project Manager Plumbing & Heating Location: Peterborough, with travel to client sites across Cambridgeshire Salary: £48k - £56k PA Job Type: Full-time, Permanent Start Date: Ideally by the end of September 2026 The Opportunity An established building services and maintenance business is looking for a Mechanical Project Manager to join its Peterborough team, with a strong focus on commercial plumbing and heating maintenance. This is a great opportunity for an experienced Senior Mechanical Supervisor, Contracts Supervisor, Mechanical Engineer or similar who is ready to take the next step into a project/contract management position. The role is approximately 70% office-based and 30% client/site-based, giving you responsibility for coordinating engineering resources, planning works, dealing directly with clients and attending sites across the Cambridgeshire region. You will oversee a team of up to eight engineers, coordinating approximately 5060 planned maintenance jobs throughout the year. The workload is predominantly planned preventative maintenance, with a smaller reactive maintenance element. This is a hands-on management role where your technical knowledge of commercial heating and plumbing will be important. Key Responsibilities Coordinate and manage a team of up to eight mechanical/plumbing and heating engineers. Plan and oversee approximately 5060 planned maintenance and project works throughout the year. Manage predominantly planned preventative maintenance (PPM), alongside reactive maintenance requirements. Allocate engineers to jobs and ensure works are completed efficiently and within agreed timescales. Coordinate workloads, materials, access requirements and client expectations. Act as a key point of contact for clients across the Cambridgeshire region. Attend client sites to carry out surveys, inspect works, discuss requirements and provide technical support. Review and prepare quotations, variations and estimates where required. Monitor the progress, quality and commercial performance of works. Manage subcontractors where required and ensure works are completed safely and to specification. Ensure all works comply with relevant health & safety legislation, company procedures and industry standards. Produce and review RAMS, reports, quotations and other project documentation. Identify additional works and opportunities while attending client sites. Support engineers with technical queries and provide practical guidance when required. Maintain accurate records of planned and reactive works using the company's CAFM/job management systems. Take ownership of customer issues and ensure they are followed through to completion. Support the ongoing development, training and performance of the engineering team. Essential Experience Strong background in commercial plumbing and heating. Experience within mechanical building services, facilities management, maintenance or service environments. Previous responsibility for supervising or coordinating engineers. Experience managing planned preventative maintenance and/or reactive maintenance. Good understanding of commercial heating, plumbing and associated mechanical systems. Confident dealing directly with clients and site representatives. Able to organise multiple jobs and engineering resources effectively. Good understanding of RAMS, safe systems of work and construction/maintenance health & safety requirements. Commercial awareness, including quotations, variations and basic budget control. Comfortable using job management/CAFM software. Full UK driving licence. Desirable NVQ Level 3 in Plumbing & Heating or a relevant mechanical qualification. SSSTS/SMSTS. Gas Safe, ACS, OFTEC or other relevant industry qualifications. Experience working to SFG20 planned maintenance standards. Previous experience working across manufacturing, commercial, education or industrial environments. Experience managing a 24/7 or emergency callout function. The business currently uses Service Life for job and maintenance management, with a planned move to Joblogic. What You'll Get Company vehicle. Monthly bonus scheme: where the monthly target is exceeded by £10,000, a bonus equivalent to 1% of basic salary is payable. 22 days' holiday plus bank holidays. 3% employer pension contribution. Healthcare Cash Plan. Employee Assistance Programme and wellbeing support. Long-term sickness provision. Ongoing training and development. Stable pipeline of long-term maintenance work. Supportive working environment. Predominantly office-based role with regular client/site visits across Cambridgeshire. Opportunity to progress from a senior supervisory position into a broader project/contract management role. TPBN1_UKTJ

Apprentice Gas Service & Repair Engineer Step into a career where your curiosity, determination, and appetite for hands-on learning really count. As a Gas Service & Repair Engineer, youll play a vital role in helping households enjoy reliable, efficient heating - while building a future-ready skillset you can be genuinely proud of. Whether youre changing direction, starting fresh, or looking for a role with real purpose, this is your chance to grow. What matters most is your drive to learn, your problem-solving spark, and your commitment to doing great work with care and confidence. At our award-winning academies, you wont just learn the basics - youll develop the skills, qualifications, and practical experience to thrive. Youll train on diagnosing, servicing, and repairing a wide range of gas heating systems - from older installations through to modern, energy-efficient tech. Youll learn how to keep systems running safely and at their best, bringing older systems back to life and making smart upgrades that boost performance. With the support of experienced engineers, youll build the confidence, capability, and know-how to make a real difference from day one. This is a role where youll make a real impact. Youll be out in the community, meeting customers, solving problems, and keeping homes safe and warm. No two days are the same - from fixing faults and restoring heating, to helping customers run their systems more efficiently and reduce energy use. Every job is a chance to make a real difference. We're proud that our commitment to inclusion and developing future talent has been recognised through awards including EDI Initiative of the Year at the 2026 Women in Utilities Awards, being named a Times Top 50 Employer for Gender Equality for the fifth consecutive year, and recognition as one of The Sunday Times Top 100 Apprenticeship Employers . If youre looking for a career with purpose, progression, and hands-on learning - and you want to feel supported as you grow - this could be your next step. Bring your ambition. Bring your curiosity. Well help you turn it into a career that makes a difference. Here's what were looking for: Use your CV to tell us who you are and show us why you're a great match for this opportunity ?? ?4 GCSEs (or Scottish Nat 5's) at grade C/4 or above, ideally including Maths and English, or equivalent qualification. A full UK driving licence with no more than 6 points. Availability to attend training at our UK-wide academies, with provided accommodation and travel if needed. Heres what's in it for you. A starting salary of £19,307 which will continue to rise as you hit specific milestones during your apprenticeship. Once you have completed the full programme and aftercare support your salary will increase to £47,303 with bonus and add ons on top. We also offer London Weighting Allowance ranging from £4,327 to £6,490 (dependant on location) for living or starting your day within London. An expensed electric van for you to use for work, including an EV charge point where applicable & charge card. Please click through to our advert to find out more and apply! TPBN1_UKTJ

Mechanical Project Manager Plumbing & Heating Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Location: Peterborough, with travel to client sites across Cambridgeshire Salary: £48k - £56k PA Job Type: Full-time, Permanent Start Date: Ideally by the end of September 2026 The Opportunity An established building services and maintenance business is looking for a Mechanical Project Manager to join its Peterborough team, with a strong focus on commercial plumbing and heating maintenance. This is a great opportunity for an experienced Senior Mechanical Supervisor, Contracts Supervisor, Mechanical Engineer or similar who is ready to take the next step into a project/contract management position. The role is approximately 70% office-based and 30% client/site-based, giving you responsibility for coordinating engineering resources, planning works, dealing directly with clients and attending sites across the Cambridgeshire region. You will oversee a team of up to eight engineers, coordinating approximately 5060 planned maintenance jobs throughout the year. The workload is predominantly planned preventative maintenance, with a smaller reactive maintenance element. This is a hands-on management role where your technical knowledge of commercial heating and plumbing will be important. Key Responsibilities Coordinate and manage a team of up to eight mechanical/plumbing and heating engineers. Plan and oversee approximately 5060 planned maintenance and project works throughout the year. Manage predominantly planned preventative maintenance (PPM), alongside reactive maintenance requirements. Allocate engineers to jobs and ensure works are completed efficiently and within agreed timescales. Coordinate workloads, materials, access requirements and client expectations. Act as a key point of contact for clients across the Cambridgeshire region. Attend client sites to carry out surveys, inspect works, discuss requirements and provide technical support. Review and prepare quotations, variations and estimates where required. Monitor the progress, quality and commercial performance of works. Manage subcontractors where required and ensure works are completed safely and to specification. Ensure all works comply with relevant health & safety legislation, company procedures and industry standards. Produce and review RAMS, reports, quotations and other project documentation. Identify additional works and opportunities while attending client sites. Support engineers with technical queries and provide practical guidance when required. Maintain accurate records of planned and reactive works using the company's CAFM/job management systems. Take ownership of customer issues and ensure they are followed through to completion. Support the ongoing development, training and performance of the engineering team. Essential Experience Strong background in commercial plumbing and heating. Experience within mechanical building services, facilities management, maintenance or service environments. Previous responsibility for supervising or coordinating engineers. Experience managing planned preventative maintenance and/or reactive maintenance. Good understanding of commercial heating, plumbing and associated mechanical systems. Confident dealing directly with clients and site representatives. Able to organise multiple jobs and engineering resources effectively. Good understanding of RAMS, safe systems of work and construction/maintenance health & safety requirements. Commercial awareness, including quotations, variations and basic budget control. Comfortable using job management/CAFM software. Full UK driving licence. Desirable NVQ Level 3 in Plumbing & Heating or a relevant mechanical qualification. SSSTS/SMSTS. Gas Safe, ACS, OFTEC or other relevant industry qualifications. Experience working to SFG20 planned maintenance standards. Previous experience working across manufacturing, commercial, education or industrial environments. Experience managing a 24/7 or emergency callout function. The business currently uses Service Life for job and maintenance management, with a planned move to Joblogic. What You'll Get Company vehicle. Monthly bonus scheme: where the monthly target is exceeded by £10,000, a bonus equivalent to 1% of basic salary is payable. 22 days' holiday plus bank holidays. 3% employer pension contribution. Healthcare Cash Plan. Employee Assistance Programme and wellbeing support. Long-term sickness provision. Ongoing training and development. Stable pipeline of long-term maintenance work. Supportive working environment. Predominantly office-based role with regular client/site visits across Cambridgeshire. xrnqpay Opportunity to progress from a senior supervisory position into a broader project/contract management role.

Fuel your future with AO – and unlock serious earning potential. Ready to apply Before you do, make sure to read all the details pertaining to this job in the description below. We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses. Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It's everything you need to power your career forward, with a team that's got your back every step of the way. Here's what you can expect to be doing as a Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time. A Few Things About You: You'll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years' experience in gas installations It'd be great if you also have: Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed) Our Benefits: What's in it for you: At AO, we've designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year. A company van with fuel paid for, so you're ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that's not all — there's plenty more to discover when you join the team. xrnqpay Location: Broadway Business Park, Yaxley, PE7 3EN Click 'Apply' now to join our family and find out more about the Gas Installations Engineer role.

Maintenance Engineer If you can turn your hand to electrical, mechanical and automation faults alike, this is a role that will use all of it. This is a Maintenance Engineer role in a modern manufacturing operation investing in new technology, on a strong package with real earning potential. As a Maintenance Engineer you will keep the production lines running for an established, forward-thinking manufacturing business. This is a multi-skilled role spanning electrical, mechanical, pneumatic, hydraulic and automation systems, so you will fault-find and repair everything from motors and drives to PLCs and control panels. Beyond keeping the plant running, you will help improve it, supporting the commissioning of new machinery, driving reliability and getting stuck into continuous improvement. It is a business investing in modern technology and sustainable production, so you will work with up-to-date kit and have a genuine say in making it better. If you take pride in solving problems others cannot and keeping a busy operation moving, this role will stretch you in the right ways. Job Responsibilities Carrying out preventive, predictive and corrective maintenance across electrical, mechanical, pneumatic and hydraulic systems Fault-finding and repairing equipment including PLCs, sensors, motors, drives and control panels Responding to breakdowns quickly to minimise downtime and keep production lines running Providing hands-on technical support to production teams and resolving bottlenecks Supporting the installation, commissioning and validation of new machinery and automation systems Interpreting technical drawings, wiring diagrams and P&IDs to install and repair equipment correctly Improving equipment reliability and performance, including OEE, MTBF and MTTR Getting involved in continuous improvement work such as Lean, Kaizen, TPM and 5S Maintaining accurate maintenance records and work orders on the CMMS system Following LOTO, risk assessments and safe working practices, and promoting a safety-first culture Helping manage critical spares and keeping key parts available Sharing knowledge and supporting apprentices and junior engineers Skills and Experience To succeed as a Maintenance Engineer you will need: Proven multi-skilled maintenance experience, typically three to five years or more, in a manufacturing or industrial environment Strong fault-finding and repair skills across both electrical and mechanical disciplines Working knowledge of PLCs, ideally Siemens Competence across pneumatics, hydraulics, motors, sensors, drives and control systems Experience with automated production lines and PLC-controlled equipment The ability to read and update electrical schematics, mechanical drawings and technical manuals A time-served apprenticeship or equivalent, with an ONC, HNC or NVQ Level 3 or higher in an engineering discipline 18th Edition (IET Wiring Regulations) certification, which is preferred Experience of preventive and predictive maintenance and CMMS systems Exposure to Lean, TPM or continuous improvement work, which is desirable A willingness to work a three-shift pattern A self-motivated, safety-focused and methodical approach Pay and Benefits As a Maintenance Engineer you will receive: A base salary of £50,676 per year Shift premiums on top of your base salary KPI-based bonuses Overtime available A three-shift pattern, with early, late and night shifts starting at 6am, 2pm and 10pm The chance to work with modern equipment in a business investing in new technology Ready to apply? Multi-skilled engineers who can cover electrical, mechanical and automation work are in short supply and high demand. This role offers a strong base, shift premiums, bonuses and overtime, modern kit to work with and a business genuinely investing in its future. If you are a Maintenance Engineer who wants technical variety, real earning potential and work that keeps you learning, this is one to act on. Apply now. TPBN1_UKTJ

Product Range Design Engineer – 12-Month Contract Location: Peterborough Contract: 12 months Rate: £35–£40 per hour, depending on experience (Outside IR35) Type: Contractor We are seeking an experienced Product Range Design Engineer to join a busy engineering environment on an initial 12-month contract . The role will focus on the development, improvement and expansion of product ranges , working from technical data sheets, engineering specifications, existing designs and customer requirements. The successful contractor will ideally have experience within food processing, food manufacturing or process engineering , with a strong understanding of engineering drawings, P&IDs and technical documentation. Key Responsibilities Develop and expand existing product ranges in line with customer and engineering requirements. Review and work from technical data sheets, specifications and engineering documentation . Interpret and understand P&IDs, process diagrams and engineering drawings . Develop and modify designs based on existing engineering standards and specifications. Review existing products and identify opportunities for design improvements, standardisation and range development . Produce and update technical design documentation and associated product information. Work closely with engineering and project teams to ensure designs meet the required specifications. Coordinate with third-party designers and suppliers where required. Review externally produced design information and ensure it aligns with technical requirements. Support the transfer of technical and design information between internal teams and external parties. Attend site visits where required to understand existing equipment, installations and customer requirements. Carry out site measurements and use existing site information to support product development. Review 3D design information and visual content produced using SolidWorks or similar CAD software. Ensure designs are practical, manufacturable and suitable for use within process and food manufacturing environments. Maintain accurate technical documentation and records of design changes. Essential Experience Previous experience as a Design Engineer, Product Design Engineer, Mechanical Design Engineer or similar . Proven experience developing, modifying or improving engineered products or product ranges . Strong ability to work from technical data sheets, specifications and engineering documentation . Good understanding of P&IDs and process diagrams . Ability to confidently read and interpret engineering drawings. Strong mechanical engineering knowledge. Excellent attention to detail, particularly when working to technical specifications. Experience working with external designers, suppliers or engineering partners. Strong communication and coordination skills. Desirable Experience Food processing or food manufacturing experience . Previous experience working with major food manufacturing clients such as Nestlé or Weetabix Experience using or interpreting SolidWorks models and 3D design content. Experience within process engineering environments. Understanding of hygienic design and equipment used within food processing applications. The Ideal Contractor This role would suit an experienced designer who enjoys product development and range expansion , rather than purely project-based design work. You will need to be technically strong, commercially aware and confident working from specifications and engineering information. A key part of the role will be understanding how individual products fit into wider process systems and being able to interpret P&IDs, drawings and technical documentation . You should also be comfortable reviewing design information produced by third parties, identifying discrepancies or improvements and ensuring the finished design meets the required specification. The ability to work independently as a contractor, manage your own workload and communicate effectively with engineering teams, designers and suppliers will be important. Contract Details Initial 12-month contract £35–£40 per hour, depending on experience Peterborough-based Product range and design development focused Food processing / process engineering environment Regular interaction with engineering teams, third-party designers and suppliers Site visits as required Suitable for an experienced Contract Design Engineer / Mechanical Design Engineer / Product Design Engineer How to Apply To be considered, please either click Apply or send your CV directly to . You can also contact Suzanne directly on . Applicants must be eligible to live and work in the UK . Sponsorship is not provided. We look forward to hearing from you! Ganymede is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

About Barhale Who are Barhale? Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including: Water Transport Built environment Energy We operate as a tier one partner for blue chip, regulated and private clients, working as part of large frameworks, joint ventures and alliances, as well as on individual standalone projects, developing long-term relationships based on delivering to the Barhale values which have been integral to our business since their inception in 1985. Our direct delivery model is at the core of everything we do, as we believe that people are our greatest asset. Therefore, we robustly source, train and retain all our own frontline delivery teams as well as management and support services. We employ over 1,200 employees nationwide. We possess a range of specialist skills to support our civil engineering and infrastructure activities, including: Tunnelling MEICA Temporary and permanent design Steel-fabrication Signs (design and fabrication) Health & safety equipment and products, including PPE Why join Barhale? As Gold Investors in People, we are committed to a high standard of people practices, creating an inclusive environment and ensuring cultural alignment to business strategy, ethos and philosophies. Job security, long-term secured work through various frameworks and large infrastructure schemes A broad range of civil engineering, mechanical and electrical schemes across some of the UKs largest infrastructure projects and clients Strong career progression as demonstrated by our track record in promoting from within, as we believe this is a key driver of our success Site Engineer The Role Here within the @one Alliance, we are a totally collaborative organisation made up of our eight partner companies (Anglian Water, Balfour Beatty, Barhale, Binnies, MMB, MWH Treatment, Skanska and SWECO) and our extended supply chain, delivering over half of Anglian Waters capital investment programme.? Water and our natural environment are the foundation of life, society and economies. The East of England has unique rivers, wetlands and coastlines, yet it is classified as severely water-stressed and faces drought and a degrading natural environment. This is due to a combination of a growing economy, the highest rate of new housing development in the UK, climate change and being a major agricultural producer. Anglian Waters purpose is to bring environmental and social prosperity to the East of England through our commitment to Love Every Drop. Anglian Water have an ambitious capital investment programme that will provide safe and resilient water supplies, permit sustainable growth, provide climate change resilience, and protect and improve the natural environment. Reporting to the site management team, this site-based role will require you to take ownership of the engineering works on site, contributing to planning the works and ensuring the works are completed in a timely and cost-effective manner. You will be managing the day-to-day quality assurance, including surveying, setting out duties, quality checks and approvals in accordance with the digital design models and ensuring highly accurate records are produced, kept and stored within digital project files. You will also be assisting the site management teams with all aspects of health, safety and environmental management. You will be heavily involved with the development of Graduate/Apprentice Engineers for talent growth and succession. Key Responsibilities Day-to-day site quality assurance, including surveying, setting out duties, quality checks and approvals. Ensure programme, quality and budget assurances are supported. Generate temporary works design briefs to a standard accepted by the Temporary Works Coordinator Review designs and raise technical queries to the design teams. Generate, review and submit red-line drawings for works packages to the design teams. Produce a 3-month lookahead for your section of work. Update the project 4-week lookahead programme weekly for your section. Manage and coordinate any clashes with other site works with the Site Manager and the site team. Identify delays and propose potential mitigation measures. Understand the design specifications and drawings for your section. Produce Inspection and Test Plans for your work and ensure effective implementation, and Inspection and Test Records for the works being undertaken, and ensure these are recorded within the nominated digital platform. Produce and manage materials approvals for your works. Ensure quality records are captured and stored correctly. Generate Non-Conformance Records and ensure these are promptly closed out. Look to minimise waste by ordering the required materials to optimise project performance. Supporting the Site Manager in material take-offs, stock control, etc. and liaising with the procurement team to ensure orders are not exceeded without authority. Monitor and maintain compliance with the Working Time Directive. Ensure you are compliant with the use of mandatory safety monitoring equipment, near-miss reporting and compliance with the company procedures. Maintain H&S standards to enable a zero-accident culture. Actively work with your team, line manager and the H&S Team to improve upon H&S procedures where possible. Report all near misses through the appropriate channel to prevent future accidents. Take full responsibility for maintaining the highest health and safety standards on your section of the project. Generate and review Risk Assessments and Method Statements for your works, ensuring that they identify and appropriately mitigate health and safety hazards. Complete safety inspections and ensure the actions are closed out. Set and maintain clear expectations for health and safety with your team and suppliers working on your section Encourage and promote near-miss reporting, ensuring close-outs outs delivered and fed back to the site manager and operatives through the electronic reporting. Deliver pre-start of shift briefings, ensuring all areas of work are covered. Ensure that self and those responsible for work fronts to the values of @one that are expected of them and respect the public and their surroundings. Essential: HND in Civil Engineering or HNC Civil Engineering Technician Level 4 or equivalent Understanding of CAD & BIM proficiency CSCS Card 3-day First Aid Ability to use robotic total station and GPS Surveying equipment. IT skills proficient in the Microsoft suite of packages Desireable: Water/Wastewater EUSR Card Caring and investing in you Our values have been embedded at Barhale for over 40 years, and they are our guiding principles regarding how we care and invest in people. Our values are our commitment to being a people-centric company. As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days of annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological and financial wellbeing. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards Would you like to know more? Please contact our Recruitment team via TPBN1_UKTJ

Part of the VolkerWessels UK Group, VolkerStevin is an industry-leading civil engineering business, providing complex and innovative engineering solutions across a wide range of sectors including maritime, flood risk management, defence, energy, water and regeneration. Collaborating with, and drawing on the specialist skills of the group's business units we deliver a truly integrated, multidisciplinary service. VolkerStevin is recruiting a number of Sub Agents to support the delivery of current and future projects across the United Utilities AMP8 Framework. This is an exciting opportunity to play a key role in delivering essential water and wastewater infrastructure projects that will benefit communities across the region. Working as part of a collaborative project team, you'll help deliver safe, high-quality construction solutions while developing your career within a leading infrastructure business. The Role As a Sub Agent, you will be responsible for the safe, efficient, and successful delivery of construction works on assigned projects or sections of larger schemes. Reporting to the Project Manager and Contracts Manager, you'll lead site activities, coordinate civil engineering and MEICA installation works, and ensure projects are delivered safely, on programme, and to the highest quality standards. Key Responsibilities: Lead and manage site operations throughout the construction phase. Drive a strong safety culture and ensure compliance with all SHEQ requirements, company procedures, and industry legislation. Produce, review, and monitor RAMS, ITPs, Site Management Plans, and Environmental Control Plans. Manage temporary works, lifting operations, excavation activities, and site authorisations. Identify and manage project risks, opportunities, and changes, escalating where required. Monitor and manage construction programmes and short-term look-ahead plans. Coordinate site activities through regular planning and progress meetings .Manage subcontractors and supply chain partners from pre-start through to completion. Support procurement, labour, and plant planning to ensure effective project delivery. Build strong relationships with United Utilities representatives, operational teams, and key project stakeholders. Produce weekly progress reports and maintain accurate project records, including as-built documentation. Drive quality standards and ensure timely closure of defects, NCRs, and outstanding works. Coordinate design deliverables, provide constructability input, and support technical query resolution. Support successful project commissioning, handover, and close-out activities. What We're Looking For: We're looking for motivated construction professionals who are passionate about delivering infrastructure projects safely and efficiently. You will ideally have: Experience in a Sub Agent, Site Agent, Senior Engineer, or similar role. A background within civil engineering, utilities, water, wastewater, or infrastructure projects. Strong knowledge of health, safety, environmental, and quality requirements. Experience managing subcontractors and coordinating multidisciplinary construction activities. Excellent communication, planning, and stakeholder management skills. The ability to identify and manage project risks, opportunities, and change. A proactive and collaborative approach to project delivery. Why Join VolkerStevin? At VolkerStevin, you'll be part of a business delivering some of the UK's most important infrastructure projects. You'll have the opportunity to work on long-term AMP8 programmes, collaborate with experienced industry professionals, and develop your career within a company that values safety, quality, innovation, and continuous improvement. If you're ready to take the next step in your career and help shape the future of water infrastructure, we'd love to hear from you. Apply now to join VolkerStevin as a Sub Agent on the United Utilities AMP8 Framework. About you Performing the role of a temporary works supervisor / co-ordinator and exposure to implementing temporary works solutions. Management of safe systems of works and quality management. Management of Permit to Excavate, Permit to Load and Strike and Services coordination. Excellent IT knowledge including use of AUTOCAD and Microsoft suite. Degree/HNC, or equivalent, in civil engineering. Previous experience at Sub Agent / Agent level. Ability to challenge designs and resolve problems to conclusion. Focused on driving value out of design and improving on subcontractor tendered costs. Ability to track, monitor and manage commercial and quality change events. Full Driving Licence. If your past experience doesn't match perfectly with every requirement of the job description, we still encourage you to apply. You may be just the right candidate for us. Why work with us? VolkerStevin is under the umbrella of VolkerWessels UK which is a multidisciplinary contractor that delivers innovative engineering solutions across the civil engineering and construction sectors including rail, highways, airport, marine, energy, water, and environmental infrastructure. By utilising the specialist skills of each business unit within VolkerWessels UK, VolkerStevin are able to ensure our staff provide unrivalled resources and expertise to our clients. We offer competitive rewards and benefits, recognising the value we place on our employees. We offer a range of benefits, including: Competitive salary Competitive annual leave and an additional day off on your birthday Option to buy additional annual leave Private medical care Pension Life Assurance Cycle to Work scheme Shopping and restaurants vouchers, rewards, and discounts Training and development opportunities-comprehensive skills-based training Family friendly polices including enhanced maternity benefits Employee Assistance Flexible working opportunities programme Mental health, physical health, and financial support 24/7 Virtual GP service Fairness, inclusion and respect We believe in pushing boundaries in the pursuit of fairness, inclusion and respect. So, our teams can be comfortable that, whatever their background, VolkerWessels UK is a place where they can be themselves and thrive. If you need support with your application, please contact us at Additional information Note for Recruitment Agencies: Our preference is to hire directly, and we will reach out to our Preferred Supplier List (PSL) agencies if this particular role qualifies for release. We kindly request that you refrain from sending speculative CVs. In the event of speculative CV submissions, no fees will be applicable, and we kindly ask that all inquiries to be directed VolkerWessels UK is committed to maintaining healthy, safe and productive working conditions for its entire staff and therefore a drugs & alcohol screening is mandatory for all. #LI-DL1 TPBN1_UKTJ