Waste management jobs in Letchworth Garden CityCreate job alerts

Reporting to the Value Stream Supervisor, this role is responsible for providing engineering support and expertise to Value Stream to optimise process capability, efficiency, and output. This includes the development, implementation, and continual improvement of manufacturing tools, processes, and systems in alignment with IATF 16949 standards. This role ensures that all activities are executed within agreed timelines while maintaining compliance with quality management requirements and driving best practices in process engineering. Responsibilities include: • Lead and sustain continuous improvement initiatives across all manufacturing activities within the Value Stream, utilising Kaizen events, SMED, Six Sigma, and Value Stream Mapping., • Drive implementation of Lean practices to eliminate waste, improve efficiency, and optimize flow throughout the workplace., • Develop, validate, and optimize manufacturing processes to ensure compliance with IATF 16949 requirements, focusing on robust process controls and defect prevention., • Support DFMEA and Process Failure Mode and Effects Analysis (PFMEA) for new products., • Ensure all process and assembly equipment meets safety, quality, and capability standards, preventing hazards and ensuring ergonomic compliance., • Specify, procure, and validate manufacturing equipment, tooling, and fixtures to meet production and quality requirements., • Support adherence to IATF 16949 standards by ensuring robust process documentation, risk assessments, and control plans., • Collaborate with Quality teams to maintain product conformity and drive corrective actions using structured problem-solving methodologies (DMAIC, 8D)., • Develop and improve Health & Safety practices for all processes, ensuring compliance with site policies and legal requirements., • Lead cost reduction initiatives through process optimisation, value engineering, and capital expenditure recommendations., • Provide accurate product costings and feasibility analyses to support business objectives., • Work with cross-functional teams to support New Product Development by ensuring manufacturing processes are integrated from concept to launch., • Prepare and submit reports detailing capital expenditure requirements, including justification and cost analysis., • Establish and maintain process capability studies and monitor performance against control limits., • Lead root cause analysis for process-related issues and implement permanent corrective actions. The successful candidate will have at least 5 years’ relevant experience in a high-volume manufacturing environment supported by strong hands-on engineering skills and a passion for continuous improvement. They will possess excellent time management and prioritization skills in conjunction with excellent communication and influencing skills developed through the delivery of cross functional projects and the engagement of stakeholders. Applicants will be able to demonstrate initiative, drive and a strong desire to achieve results through the use of Lean tools and processes. ABOUT US Crane Building Services and Utilities (BS&U) is part of the Fluid Handling Division of Crane Co. founded in 1855, which is a global, multi-industry, New York Stock Exchange quoted company. We design, manufacture, package and market engineered flow control solutions for the HVAC and Utility sectors, with strong sales into key growth export markets. The name Crane speaks of who we are, what we stand for and how our customers perceive us: A company with history and tradition, but also a company that is innovative, quality minded and one which acts with integrity and still holds to the resolution of its founder. Crane Co. was founded on 4th July 1855 by Richard Teller Crane who made the following resolution: "I am resolved to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just towards employees; and to put my whole mind upon the business." The essence of this resolution is the business policy of Crane Co. today. We believe that embracing inclusion and diversity is key to our success and as such we are seeking applications from candidates who will contribute their different backgrounds, cultures and experiences to our business.

Supply Chain & Operations Manager £45,000 – £50,000 + Benefits including Share Options Hertfordshire At OGT, they’re not just making snacks, they’re rewriting the rulebook on how people fuel. They have created the world’s first wrapper-free, oat-based energy bar: no plastic, no waste, just real ingredients protected by an innovative natural coating. Cleaner, smarter, high-performance nutrition that’s better for people and the planet. That mission demands a supply chain and operation that runs with precision, pace, and purpose. That’s where you come in. As Supply Chain & Operations Manager, you’ll sit at the heart of the business. Forecasting demand, building production plans, managing material flow, and ensuring the factory delivers exactly what’s needed, when it’s needed, without compromise. If the plan works, the operation works. And if the operation works, the mission moves forward. This is the role for someone who loves creating structure in fast-moving environments, thrives on fixing problems before they occur, and takes pride in planning and delivering operational excellence. What You’ll Be Responsible For Forecasting & Planning • Build accurate forecasts aligned with sales and customer demand, • Convert forecasts into realistic production schedules across daily, weekly, and long-term horizons, • Balance labour, capacity, raw materials, and changeovers to optimise throughput, • Ensure material availability through smart inventory management and supplier coordination Own the Production Operation • Oversee day-to-day factory performance across shifts, • Lead and develop production teams with clear goals, standards, and accountability, • Ensure production plans are executed OTIF, safely, and at the right quality, • Strengthen communication between planning, production, technical, and commercial teams Performance, Efficiency & Continuous Improvement • Drive improvements in efficiency, labour utilisation, yield, and waste, • Identify bottlenecks before they become problems, • Keep production rhythm predictable, stable, and resilient, • Maintain tight control of KPIs across planning and operations Quality, Safety & Compliance • Maintain high hygiene, food safety, and audit standards, • Embed safe systems of work across all areas, • Protect the integrity of a product built on innovation and trust Hands-On Problem Solving • Step in when needed to unblock issues and keep schedules on track, • Work side-by-side with teams to keep the operation moving smoothly What You’ll Bring • Experience in supply chain, planning, or operations in food, FMCG, or another fast-moving environment, • Strong forecasting, scheduling, and planning skills, • A proven ability to lead and develop teams, • A solid understanding of food safety, hygiene, and compliance, • Calm, structured decision-making with a hands-on mindset, • A problem-solver who thrives in pace and enjoys building the systems that keep things flowing

Reporting to the Value Stream Supervisor, this role is responsible for providing engineering support and expertise to Value Stream to optimise process capability, efficiency, and output. This includes the development, implementation, and continual improvement of manufacturing tools, processes, and systems in alignment with IATF 16949 standards. This role ensures that all activities are executed within agreed timelines while maintaining compliance with quality management requirements and driving best practices in process engineering. Responsibilities include: • Lead and sustain continuous improvement initiatives across all manufacturing activities within the Value Stream, utilising Kaizen events, SMED, Six Sigma, and Value Stream Mapping., • Drive implementation of Lean practices to eliminate waste, improve efficiency, and optimize flow throughout the workplace., • Develop, validate, and optimize manufacturing processes to ensure compliance with IATF 16949 requirements, focusing on robust process controls and defect prevention., • Support DFMEA and Process Failure Mode and Effects Analysis (PFMEA) for new products., • Ensure all process and assembly equipment meets safety, quality, and capability standards, preventing hazards and ensuring ergonomic compliance., • Specify, procure, and validate manufacturing equipment, tooling, and fixtures to meet production and quality requirements., • Support adherence to IATF 16949 standards by ensuring robust process documentation, risk assessments, and control plans., • Collaborate with Quality teams to maintain product conformity and drive corrective actions using structured problem-solving methodologies (DMAIC, 8D)., • Develop and improve Health & Safety practices for all processes, ensuring compliance with site policies and legal requirements., • Lead cost reduction initiatives through process optimisation, value engineering, and capital expenditure recommendations., • Provide accurate product costings and feasibility analyses to support business objectives., • Work with cross-functional teams to support New Product Development by ensuring manufacturing processes are integrated from concept to launch., • Prepare and submit reports detailing capital expenditure requirements, including justification and cost analysis., • Establish and maintain process capability studies and monitor performance against control limits., • Lead root cause analysis for process-related issues and implement permanent corrective actions. The successful candidate will have at least 5 years’ relevant experience in a high-volume manufacturing environment supported by strong hands-on engineering skills and a passion for continuous improvement. They will possess excellent time management and prioritization skills in conjunction with excellent communication and influencing skills developed through the delivery of cross functional projects and the engagement of stakeholders. Applicants will be able to demonstrate initiative, drive and a strong desire to achieve results through the use of Lean tools and processes. ABOUT US Crane Building Services and Utilities (BS&U) is part of the Fluid Handling Division of Crane Co. founded in 1855, which is a global, multi-industry, New York Stock Exchange quoted company. We design, manufacture, package and market engineered flow control solutions for the HVAC and Utility sectors, with strong sales into key growth export markets. The name Crane speaks of who we are, what we stand for and how our customers perceive us: A company with history and tradition, but also a company that is innovative, quality minded and one which acts with integrity and still holds to the resolution of its founder. Crane Co. was founded on 4th July 1855 by Richard Teller Crane who made the following resolution: "I am resolved to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just towards employees; and to put my whole mind upon the business." The essence of this resolution is the business policy of Crane Co. today. We believe that embracing inclusion and diversity is key to our success and as such we are seeking applications from candidates who will contribute their different backgrounds, cultures and experiences to our business.

An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary : Circa £72 ,000 depending on experience Dynamic (hybrid) working : 3 days per week on-site due to workload classification Security Clearance : British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension : maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities : Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities. What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal). Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. TPBN1_UKTJ

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine.Ensure you read the information regarding this opportunity thoroughly before making an application.Whatever stage youre at in your career, with us youll have an opportunity to grow and develop.Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive.Where will you be working? We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations.We enhance and extend asset life, ensuring compliance with water quality and environmental standards.Were problem solvers with over 140 years of combined experience in engineering and infrastructure.This role will be within our Water Division working with water and waste water.Want to be a part of it? What will you be doing? At M Group Water, were at the forefront of delivering innovative design and build sustainable solutions within the water sector across the UK.With a growing portfolio of high-profile water contracts for AMP 8 & beyond, were committed to driving technical excellence, sustainability, and cutting-edge engineering to transform the way water services are delivered to our stakeholders and the communities.M Group Water is a leading provider of sustainable, innovative design and build solutions across the UK water sector.As we expand our AMP8 portfolio, we are seeking an experienced Area Technical Manager to lead and develop our new In-House Design Function in the South Division.This strategic role involves providing technical assurance, managing multidisciplinary design teams, and ensuring compliance with governance and performance standards.You will collaborate with internal and external stakeholders to drive design quality, buildability, and efficiency across projects.Key responsibilities include leading technical delivery from concept to construction, supporting business performance, and contributing to divisional strategy.Youll also play a key role in developing policies, improving systems, and fostering a culture of safety, innovation, and engagement.Join us to help shape the future of water infrastructure and deliver impactful solutions for communities and the environment.What youll bring Degree-qualified in an engineering-related discipline Proven experience in technical project delivery within a design and build environment Strong background in the water treatment industry Demonstrated ability to lead and manage multi-disciplinary design teams Results-driven, with a focus on delivering to time, cost, and quality targets Excellent technical and project management capabilities Skilled in identifying and managing project risks and scope changes Previous experience in a senior management or leadership role Strong interpersonal and stakeholder engagement skills, from site teams to senior leadership Proactive, enthusiastic, and solutions-oriented, with a passion for overcoming operational challenges Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme In addition, this role offers; Company car and fuel card with a range of EV and hybrid vehicles to choose from My Car Choice our salary sacrifice EV/ Hybrid car scheme Private health care for youand your family Health Care Cash Plan, giving you the ability to claim back medical expenses for things like dental, eyecare and physiotherapy and much more! 25 days annual leave plus bank holidays Recommend a friend get rewarded for introducing people to us! Personal Accident Cover About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference.Were one of the Top 100 UK companies actively supporting and recruiting army veterans.Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another.We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours.Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note: Occasionally, job adverts might be closed before the stated closing date.Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process.Some roles require drug and alcohol testing as part of induction and onboarding.MGroupWd02fcfcb-6df4-40ee-95cf-3eb059ce3173