Air gas jobs in Clifton, New JerseyCreate job alerts

Job Description New Community Corporation in Newark, New Jersey is one of the largest and most comprehensive community development agencies in the country; New Community's success rests on its comprehensive approach to community development. It is active in housing, health care, education, job training, childcare and economic development. It has provided training to community development professionals from around the country and the world, having hosted representatives from more than 20 countries throughout the years. The goal of New Community is to help community residents improve the quality of their lives to reflect individual God-given dignity and personal achievement. The HVAC Technician will install and maintain all aspects of temperature control systems throughout NCC properties. Will also install and maintain HVAC systems and work on fuel supply lines, air ducts, vents, compressors, evaporators and piping. As a member of the Environmental Services Department will also be assigned to other locations within the NCC network of properties to perform maintenance related duties both indoors and/or outdoors. This includes, snow/ice removal, room set-ups, landscaping duties, etc. • Install, adjust, repair and inspect heating, ventilation and air conditioning equipment including forced air furnaces, boiler, water pumps, chillers, air conditioning units, exhaust fans, air filters, compressors, cooling towers, heat exchanges, refrigerators and gas stoves., • Residential HVAC technicians install and repair heating and air quality systems, as well as refrigeration systems, • Prior to installing an HVAC system, technicians and review specifications, • May periodically return to check up on system's performance, • Conduct preventative maintenance on systems., • Troubleshoot system issues as they arise; adjust system settings and conduct performance tests using specialized tools., • Use of variety of hand and power tools equipment in performing tasks., • Comply with safety regulations and maintain clean and orderly work area., • Document work completed, • Communicate with Property Manager with building related work projects/issues., • Can be called into to work outside of business hours for emergencies., • Operates motor vehicles, • Orders materials required to accomplish given tasks, • Accountable for assigned company tools., • Follow all safety guidelines, including procedure for reporting work relates accidents., • Demonstrate professionalism consistent with mission, vision and values of New Community Corporation with all residents, clients, families, employees and external contacts., • Perform any additional duties as deemed necessary. 3-5 years of experience in HVAC related field. * Knowledge use of HVAC equipment and tools * Knowledge of local codes and standards

Blend Air Mechanical, has been serving Rockland County with expert plumbing, heating, and cooling since 1984. Plumbing services, include, but not limited to: Kitchen Repairs, Bathroom Repairs, Gas Line Repairs, Waterline Repairs and Installations, Water Heater Repairs and Installations (Standard and

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. * System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. * Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. * Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. * Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. * Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. * Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. * Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. * Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

Job Description Job description Service & Maintenance Corp. 6 WARREN DRIVE, UNIT A. VERNON, NJ 07462 HAVC/R Job Description: Mechanical Services Contractor located in New Jersey is seeking Service Technicians with 5+ years of experience with commercial refrigeration and HVAC systems. Positions open for technicians servicing New York, New Jersey and Southern Connecticut metro area. Primary Job Responsibilities: Maintain, repair and troubleshoot HVAC/R equipment to include but not limited to packaged units, split systems, Walk-in boxes and ice makers a plus. Install, inspect, diagnose and correct problems in HVACR systems Inspect systems and their components (e.g. air conditioning, heating and refrigeration units, etc.) to ensure safety and identify necessary repairs and provide an ongoing program of preventive maintenance Repair or replace defective equipment, components, or wiring on heating/air-conditioning/refrigeration systems Diagnose problems and/or failures in heating/air conditioning/refrigeration systems to identify equipment and, or systems repair and replacement needs Job Requirements: Minimum 5 years’ experience in HVAC Refrigeration work Commercial industry HVAC Refrigeration background Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area. Applicants must be proficient with the use of tablets and smart phones EPA Certification (universal and 608) – and advanced understanding of electricity, wiring, and control circuits (all equipment), to perform maintenance and repairs Communicate thoroughly and effectively with dispatch teams and account managers Maintain and be accountable for material and supply requisition as needed for each job, including online purchase order execution Ability to safely lift 50 pounds and climb ladders Customer service skills with the ability to build strong relationships with internal and external customers Advanced troubleshooting ability and mechanical skills F60 FDNY Torch Ops a plus G60 Torch Flammable Gases a plus High school diploma or GED Valid and clean driver’s license Union training or NATE certifications is a plus Off street company vehicle parking a must What We Offer: Competitive hourly salary, including overtime and stand-by Weekly pay with direct deposit Company supplied vehicle with gas card, iPhone & iPad Paid vacation and holidays Union benefits and a team environment Job Type: Full-time Job Type: Full-time Pay: $60,000.00 - $125,000.00 per year COVID-19 considerations: All employees are issued proper PPE equipment to perform the job Company DescriptionService & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team.Service & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team.

Growing company adding to our team for Technicians and Installers from the HVAC industry! This Jobot Job is hosted by: Brandon Fobert Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $45 - $55 per hour A bit about us: A growing, family -focused business with great growth potential! Why join us? We provide competitive wages and benefits to individuals that have the desire to work hard and succeed. We provide 401k plus company match, health insurance, paid vacations, paid holidays, commission opportunities and more. Job Details Job Details: We are seeking a competent and experienced HVAC Technician to join our growing team in the construction industry. As a HVAC Technician, you will play a crucial role in installing, maintaining, and repairing our clients' heating, ventilation, and air conditioning systems. You will be responsible for ensuring that our HVAC systems are functioning at optimal levels, providing comfort and efficiency for our clients. This is a full-time, permanent position that offers competitive compensation, benefits, and the opportunity to work in a dynamic, fast-paced environment. Responsibilities: 1. Install, service, and repair heating and air conditioning systems in residential and commercial settings., 2. Troubleshoot and repair HVAC/R equipment, wiring, and controls., 3. Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs., 4. Service and repair evaporative coolers, roof-top package units, split systems, boilers, commercial refrigeration, chillers, and other HVAC equipment., 5. Work closely with the project management team to ensure projects are completed on time and on budget., 6. Maintain accurate documentation of all installation, service, and repair work completed each day., 7. Schedule and complete routine preventative maintenance., 8. Maintain a clean and organized work area, and ensure all tools are in good working condition., 9. Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area., 10. Provide excellent customer service to clients, ensuring their comfort and satisfaction. Qualifications: 1. At least 5 years of experience as an HVAC Technician., 2. EPA Certification is mandatory., 3. Comprehensive knowledge of the principles, methods, and techniques used in the installation, maintenance, and repair of HVAC systems., 4. Proficient in troubleshooting HVAC/R equipment, wiring, and controls., 5. Ability to repair and maintain HVAC equipment, including air conditioners, furnaces, and other related equipment., 6. Excellent oral and written communication skills., 7. Strong customer service and problem-solving skills., 8. Ability to work independently and manage time effectively., 9. Must be able to handle a physical workload, including lifting heavy equipment and working in confined spaces., 10. Must have a valid driver's license and reliable transportation. If you are a skilled HVAC Technician looking for a challenging and rewarding career in the construction industry, we would love to hear from you. Apply today! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68488 Hiring Manager: Alex Sim HR Rep: Patricia Oltar ___Summary: The position will work closely with leadership level and employee level team members across the manufacturing site to support a strong proactive safety culture and an effective, efficient, and compliant EH&S process. The position will maintain documentation to support compliance with regulatory standards at the federal, state, and local levels. Principal Duties and Responsibilities: ___General • Comply with all OSHA, Owens Corning, and other workplace regulatory rules., • Proactively lead the Owens Corning Kearny team by example in all aspects of EH&S., • This is an in-person, onsite role in an industrial manufacturing setting., • Availability to work on different shifts once per week to support 24-hour manufacturing operations., • Attend daily production department shift huddles once per week to communicate EHS initiatives., • Investigate workplace safety concerns and submit SAP work request notifications as needed., • Participate in Owens Corning EHS regional calls to understand Roofing & Asphalt Divisional priorities., • Assist in Total Productive Maintenance (TPM) program implementation., • Support facility needs through management of EH&S vendor activities., • Support facility safe operation through EH&S supply purchasing and procurement., • Maintain a clean and orderly work area., • Working knowledge of OSHA General Industry safety program standards, • Maintain and audit Owens Corning ___SIF (Serious Injury or Fatality-potential) program standards:, • Powered Industrial Vehicles, • Lock Tag Try / Hazardous Energy Control, • Machine Guarding, • Working from Heights, • Confined Space Entry, • Electrical Safety, • Hot Work, • Understand and ensure compliance with Owens Corning Lock/Tag/Try system.Become an expert on hazardous energy control using provided documentation. Conduct or facilitate employee lockout training., • Manage Owens Corning Powered Industrial Vehicle program., • Become an Owens Corning forklift trainer., • Apply prescribed hazard analysis methodologies to determine at-risk conditions., • Complete initial investigations and determines root cause of reported injuries / near misses., • Lead and implement HPI (Human Performance Improvement) principles through ongoing safety communication on the floor, specialized projects, Job Hazard Analysis (JHA), and other training., • Lead monthly Safety Committee Meetings., • Work towards certification as an Owens Corning Hazard ID & Control Specialist 2.0, • Lead and maintain Learning Management System (LMS) online safety training program in both Roofing and Asphalt., • Act as a guide and main point of contact for safety training for outside contractors., • Lead, maintain and update safety training package for all Owens Corning new hires., • Lead facility housekeeping in accordance with environmental, safety, and health program requirements., • Lead compliance efforts for all site environmental regulatory programs including, but not limited to:, • Title V. Major Source Facility air permit, • NJPDES discharge water permit, • USEPA SPCC plan, • USEPA FRP plan, • NJDEP DPCC / DCR plans, • EPCRA Section 313 / Community Right to Know, • NJ Safe Drinking Water standard, • Radiation General License, • Assist in maintenance of the Owens Corning facility Environmental Management System (EMS)., • Maintain facility environmental compliance calendar and adhere to all reporting deadlines., • Lead closure of monthly compliance calendar action items for Roofing and Asphalt facilities (physical records verification, inspection confirmations, vendor management, compliance planning), • Update and maintain the Globally Harmonized System (GHS) for hazard communication program., • Manage site Safety Data Sheet (SDS) inventory onsite and electronically., • Communicate effectively with environmental consultants to support facility programs., • Assist in scheduling of workplace biannual industrial hygiene surveys., • Identify and mitigate health concerns in the workplace., • Understand and mitigate exposure to workplace gas and chemical hazards, including the oversight of safe confined space entry procedures; use and calibration of facility multi-gas meters., • Ability to work well in a group or alone., • Ability to manage own time and assignments on a priority basis., • Strong organizational skillset and attention to detail., • Able to communicate effectively in English, both verbally and written., • Able to maintain extensive professional relationships., • Ability to communicate effectively across all levels of the organization: regional management, facility management, facility supervision, union representatives, and floor employees., • Maintain acceptable work attendance record in accordance with company policies., • Strong team mentality., • Must demonstrate strong computer literacy skills., • Demonstrate strong working knowledge of Microsoft Office suite (Word, Excel, Powerpoint)., • Experience with industry-specific software preferred (SAP, AspenTech, Cority, Actio, Dakota)., • College degree required., • Leadership training, experience leading and facilitating groups., • Experience working in an industrial / operational environment preferred., • Experience working within regulatory systems required., • Forklift trainer experience preferred., • Experience managing workplace training programs preferred., • Owens Corning Hazard Recognition & Control Specialist preferred., • Able to climb and descend stairs., • Lift, push and pull up to 50 lbs., • Handle and control objects, tools, and devices., • Able to climb tank stairways to read gauges once per month (2-3 stories)., • Able to conduct repetitive hand, arm, leg movements., • Able to conduct bending and twisting movements., • Must be able to squat and bend at the waist and knees freely., • Exposure to hot and cold temperature extremes., • Exposure to elevated sound or noise levels requiring use of hearing protection. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Job Description The Role: We are looking for a Director, Environmental Permitting, to lead and scale all environmental functions supporting development, permitting, construction, and operations of on-site power generation to support large data center loads across the U.S. You will be responsible for leading all environmental strategy, permitting, compliance, and regulatory interface activities for Scale Microgrids Data Center business, providing executive-level oversight of environmental risk management across natural gas generation facilities, data center infrastructure, and electric transmission and distribution assets. You will establish environmental standards, manage agency relationships, oversee consultants, and ensure projects are delivered on schedule and in full regulatory compliance. This is a leadership role with strategic and operational accountability. Environmental risk can kill a project quietly and expensively, and this role ensures our portfolio moves forward with regulatory certainty, disciplined compliance, and long-term operational stability. The role reports to our Chief Development Officer, Data Centers, and is based in either our NYC, Ridgewood, NJ, Santa Monica/Oakland, CA, or Chicago offices. Key responsibilities will include: Strategic Leadership • Develop and execute environmental strategies for all projects., • Identify environmental risks early in project development and integrate mitigation strategies into siting, engineering, and financial modeling., • Serve as the environmental authority for executive leadership., • Direct permitting strategy for natural gas generation facilities, data centers, substations, transmission infrastructure, and distribution systems., • Oversee federal, state, and local environmental permitting, including Clean Air Act permitting (Title V, PSD, minor source permits), Clean Water Act Sections 404 and 401, stormwater and NPDES compliance, wetlands and listed species coordination, cultural resource coordination, and NEPA documentation where applicable., • Develop permitting schedules aligned with project development milestones., • Ensure compliance across development, construction, and operational phases., • Establish internal environmental compliance frameworks and reporting systems., • Oversee environmental audits and corrective action plans., • Direct environmental due diligence for land acquisition and project development., • Oversee Phase I and II ESA processes., • Evaluate site constraints related to wetlands, species, floodplains, and cultural resources., • Partner with Development, Engineering, Construction, Legal, and Finance teams., • Support investor diligence and lender technical reviews., • Provide environmental risk summaries for board-level presentations., • Periodic travel to project locations, • A combination of office, field, and agency engagement responsibilities.The Ideal CandidateRequired skills:, • Bachelor’s degree in Environmental Science, Environmental Engineering, Biology, or related field., • 10+ years of progressive environmental experience in energy, utility, or infrastructure sectors., • Demonstrated leadership experience managing environmental programs or teams., • Deep working knowledge of environmental regulations., • Experience in natural gas generation and electric infrastructure projects., • Strong understanding of air permitting for combustion turbines or reciprocating engines., • Experience interfacing directly with federal and state regulatory agencies., • Proven ability to manage complex, multi-permit development timelines., • Strong executive communication skills. Preferred skills: • Master’s degree in environmental or related discipline., • Professional certification (e.g., P.E., CEP, CHMM)., • Experience supporting data center infrastructure., • GIS proficiency and ability to interpret spatial environmental data., • Experience in microgrid or distributed energy development. Leadership Competencies: • Strategic thinker who understands how environmental decisions impact capital deployment and schedule., • Calm and decisive under regulatory pressure., • Able to balance compliance with development velocity., • High ownership mindset., • Strong negotiation skills.

Job DescriptionBROAD U.S.A. is a privately held company headquartered in New Jersey, delivering innovative solutions in three product areas: • HVAC: Absorption chillers: Non-electric central air conditioning powered by natural gas or waste/process heat which saves energy and greatly reduces the customer’s carbon foot print, and High Energy Efficient Maglev Chillers, • Indoor Air Quality systems: Ventilation, Filtration and Air Purification systems, • Modular construction: Mid and high rise sustainable modular buildings built with B-CORE, BROAD’s stainless steel structural technology that provides an unlimited service lifeResponsibilities:, • Market development for our Absorption Chiller, Maglev Chiller and ERV/Indoor Air Quality product lines in Tri-state area, • Develop and manage a book of business and project sales pipeline, • Develop regional channel partners and maintain customer relationship, • Prepare technical proposals through gaining a thorough understanding of customer requirements, site conditions and BROAD chiller products, • Gathering and incorporating competitive intelligence in your territory to better position the Company’s offering., • Result-oriented performance tracking to reach moderate high KPI monthly, quarterly and yearly, • Providing timely and clear feedback to Company management regarding business opportunities, market trend, competitive threats, and customer issues;, • Willing to handle complex sales decisions and eventually reach the sales goal with strategic thinking, • Ability to travel with customers for Factory Acceptance Tests in China, when needed, • Proactively thinker and own your sales territory Qualifications:, • The ideal candidate will have the following qualifications:, • 3+ years of HVAC sales with proven track record, • Mechanical Engineering or other technical education, • Requires the ability to read and interpret HVAC/R mechanical, electrical, and piping specifications and project designs to determine job scope of work requirements., • Strong communication skills, high level of performance tracking, • Compensation package is a blend of salary, bonus and commissions based on performance, • Medical/dental/vision benefits, 401(k) plan with match after probation BROAD U.S.A. is an equal opportunity employer

Job Description SUMMARY Paragon Professional Services, LLC is currently seeking a qualified Lead Armed Transportation Officer for DHS/ICE in Newark, NJ. Wage/Salary Range: $41.00 / hour Applicants will be contacted via phone or email within ten (10) business days of submittal. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. · Work closely with the site supervisor to ensure efficient execution of contract requirements. Act a back-up in the supervisor’s absence · Mentor and train transportation officers in the field. · Perform transportation duties per PBNDS Standards and Training. Transportation and guard services will be provided 24/7 throughout the Newark AOR . · Ensure all detainee transports are documented and detainee records and possessions are always safeguarded. Provide trip documentation to the Transportation Coordinator in a timely manner. · Notify Operations Supervisor, Transportation Coordinator and/or Project Manager of any route variations/changes. · Ensure that any required detainee documentation is obtained from the transferring facility/agency prior to departure. · Ensure that the assigned vehicle maintenance and service records are in corresponding binders. · Report any safety related transportation issues immediately and complete a vehicle repair order and give to the Supervisor in charge of Fleet Management. · Conduct pre-trip vehicle inspections on your assigned vehicle prior to departing the HUB. Complete post vehicle checks at the completion of your assignment. · Ensure all required equipment is present in your assigned vehicle prior to departing. This shall include, but not limited to, first aid kits, insurance card, flares, security devices, etc. (See equipment list assigned to each vehicle.) · Report for work at your scheduled time (assigned by Operations Supervisor daily). · If assigned to a stationary guard post, such as hospital duty, ensure compliance with Post Orders and hospital protocol. · Ensure you always have in your possession; guard card, weapons permit, ICE ID, Company ID, medical card (if applicable). · Forward any gas receipts to the Supervisor in charge of Fleet Management. · Report any accidents, incidents and/or injuries associated with your transportation duties. Complete any required incident reports and/or documentation prior to your departure. · Complete a Record of Presence (ROP), equipment and key sign in/out sheet and all associated paperwork necessary daily. · Assist managers and supervisors in overseeing operations · Other duties as assigned QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications (applies to both this section and KSAO’s) · High School Diploma · Minimum two (2) years’ experience as a Law Enforcement Officer and/or Military Police Officer or six (6) months experience as a security officer engaged in functions related to detailing civil or administrative detainees or, two (2) years active-duty military service with an honorable discharge. Knowledge, Skills, Abilities, and Other Characteristics · Ability to communicate clearly and concisely, both orally and in writing. · Basic knowledge of Microsoft Office applications and data entry. · Effective organizational skills. Preferred · Supervisory experience · Possession of a valid New Jersey Permit to Carry · Possession of a valid New Jersey Security Officer Registration Card · Possession of a valid Driver’s License or valid Commercial Driver’s License for the state you reside in · Possession of a USDOT Medical Card (for CDL license holders only) · Active Federal government security clearance. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of the time spent sitting will be in a transportation vehicle with limited opportunity to move about. COVID VACCINATION REQUIREMENTS · This position is subject to federal or company requirements regarding COVID-19 vaccination or regular testing. Details to be provided by the hiring manager. Employees are expected to comply with all current and future federal and company requirements. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS · This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Job is performed in a transportation vehicle either as a driver or passenger responsible for maintaining the safety and security of all detainees. Daily exposure to various individuals whose medical history is unknown resulting in possible exposure to potentially contagious air and blood borne pathogens. SUPERVISORY RESPONSIBILITIES · No supervisory responsibilities. ADDITIONAL QUALIFYING FACTORS · Ability to obtain and maintain Federal Government Clearance · Ability to obtain and maintain Wear Carry Permit for the work site specific state · Ability to obtain and maintain Security Guard Certification work site specific state · Ability to pass pre-hire and random drug tests and physicals. · Valid Driver’s License for the State you reside in As a condition of employment, you will be required to pass a pre-employment drug screening/physical and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference. BSNC gives hiring, promotion, training and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job Description Paragon Professional Services, LLC (Paragon) is a BSNC company. Paragon received in August 2016. Paragon offers a wide range of environmental investigation, consulting, compliance, and remediation services as well as IT solutions, Facility O&M, Materiel Support, Supply and Security to both private- and public-sector clients throughout Alaska and the Continental U.S. Paragon’s experienced professional staff is dedicated to producing high-quality documentation and providing safe field execution to support its clients’ projects in line with local, state and federal guidelines and regulations. Wage/Salary $38.62 per hr. About this position: Armed Security Transportation Officer – Newark, NJ The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position Applicants will be contacted via phone or email within ten (10) business days of submittal. Essential Duties & Responsibilities • Perform transportation duties per PBNDS Standards and Training., • Ensure all detainee transports are documented and detainee records and possessions are safeguarded at all times. Provide trip documentation to the Transportation Coordinator in a timely manner., • Notify Operations Supervisor, Transportation Coordinator and/or Project Manager of any route variations., • Ensure that any required detainee documentation is obtained from the transferring facility/agency prior to departure., • Ensure that assigned vehicle maintenance and service records are in corresponding binders., • Report any safety related transportation issues immediately and complete a vehicle repair order and give to the Supervisor in charge of Fleet Management., • Conduct pre-trip vehicle inspections on your assigned vehicle prior to departing the hub., • Ensure all required equipment is present in your assigned vehicle prior to departing. This shall include, but not limited to, first aid kits, insurance card, flares, security devices, etc. (See equipment list assigned to each vehicle.), • Report for work at your scheduled time (assigned by Operations Supervisor daily)., • If assigned to a stationary guard post, such as hospital duty, ensure compliance with Post Orders and hospital protocol., • Ensure you have in your possession at all times; guard card, weapons permit, ICE ID, Company ID, medical card (if applicable)., • Complete post vehicle check at the completion of your assignment., • Forward any gas receipts to the Supervisor in charge of Fleet Management., • Report any accidents, incidents and/or injuries associated with your transportation duties. Complete any required incident reports and/or documentation prior to your departure., • Complete a Record of Presence (ROP), equipment and key sign in/out sheet and all associated paperwork necessary on a daily basis, • Transport Officers are required to maintain a valid Armed Guard/Firearms permit as part of their qualifications to perform transport duties. Maintenance includes passing the periodic firearms recertification. Officers who fail to maintain their armed guard/firearms permit may not be assigned to Transportation duties., • The Contractor shall certify proficiency every quarter. Training curriculum shall include Use of Force training, Tactics, Weapon Safety, and Range Qualifications. · Education Requirements: High School Diploma · Level of Experience Requirements: Minimum two (2) years’ experience as a Law Enforcement Officer and/or Military Police Officer or six (6) months experience as a security officer engaged in functions related to detailing civil or administrative detainees or, two (2) years active-duty military service with an honorable discharge. • Current Public Trust Clearance, • Strong communication skills; verbal and written., • Ability to obtain and maintain Public Trust Clearance. Preferred · Possession of a valid Wear Carry Permit for the site-specific state. · Possession of a valid Security Guard Certification for the site-specific state. · Possession of a valid Commercial Driver’s License (CDL) for the state you reside in · Possession of a USDOT Medical Card (for CDL license holders only) · Current federal background investigation and access or ability to obtain. · Active Public Trust clearance. Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees must always maintain a constant state of mental alertness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time Work Environment Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. The physical demands described here are a representation of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of the time spent sitting will be in a transportation vehicle with limited opportunity to move about. Physical Setting: Job is performed in a transportation vehicle either as a driver or passenger responsible for maintaining the safety and security of all detainees. Daily exposure to various individuals whose medical history is unknown resulting in possible exposure to potentially contagious air and blood borne pathogens. Long distance travel may also require overnight hotel stays due to on duty hours restrictions. Schedule and Flexibility: Must maintain an active cellphone to receive assignments and maintain communication with co-workers and supervisory staff. Must be available 24 hours per day, seven days per week. Other Pertinent Work Details: As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job DescriptionDescription: Benefits • Sign-On Bonus on qualified experience, Discretionary Quarterly bonuses & recruiting incentives, • Company van + gas card for eligible techs, • Paid training and career advancement, • Medical, Dental, Vision + 401K match, • Opportunity within a growing organization to grow your career Position Summary The Senior Commercial HVAC Technician is responsible for performing expert-level service, maintenance, installation, and diagnostics on complex commercial HVAC systems. This role acts as a technical leader in the field, supports large-scale commercial projects, and mentors less experienced technicians. The Senior Technician ensures all work meets safety, quality, and compliance standards while providing exceptional customer service to commercial clients. Key Responsibilities • Diagnose, repair, and maintain complex commercial HVAC systems including RTUs, VAV systems, heat pumps, VRF/VRV systems, boilers, chillers, cooling towers, air handlers, and ventilation systems., • Lead advanced troubleshooting, root-cause analysis, and major component replacements., • Perform commercial system installations, start-ups, commissioning, and retrofits according to manufacturer specifications and project requirements., • Conduct detailed preventive maintenance and provide recommendations for system improvements, energy efficiency, and lifecycle upgrades., • Ensure all work adheres to company standards, project specifications, OSHA safety regulations, and local building codes., • Provide coaching, technical guidance, and on-the-job training to junior and mid-level technicians., • Work closely with dispatch, project managers, and estimators to support scheduling, work planning, and customer communication., • Build strong client relationships and communicate findings, options, and recommendations clearly and professionally., • Complete accurate documentation of service reports, time entries, parts usage, and job progress., • Maintain company tools, equipment, and service vehicle in safe operating condition. Qualifications • 10+ years of commercial HVAC service and/or installation experience required., • Strong proficiency with commercial systems including chillers, boilers, VRF/VRV, and complex control systems., • EPA Universal Certification required., • Technical school, trade certification, or completed HVAC apprenticeship highly preferred., • Ability to read and interpret commercial blueprints, plans, and control schematics., • Exceptional diagnostic skills and proven ability to resolve complex system issues independently., • This position requires a valid driver’s license., • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE #EN

Job DescriptionAbout us: BROAD U.S.A. is a privately held company headquartered in Hackensack New Jersey. Relying on our innovative and environmental-friendly technologies, BROAD U.S.A. supplies non-electric central air conditioning powered by hot water, steam, waste/process heat or natural gas. We are committed to optimizing energy efficiency for clients in Commercial, Industrial and Government markets, and to greatly reducing our customers’ carbon footprint. BROAD also specializes in Air Purification, Filtration and Ventilation (ERV) systems. About the role: We are seeking an HVAC Field Service Technician to service HVAC equipment and systems for maintaining cooling, heating, and ventilation to buildings and facilities throughout but not limited to the New York Tri-State area. Responsibilities: • Perform preventative maintenance, diagnosis and repair for HVAC system, • Provide technical support for new chiller installation, startup and commissioning, • Demonstrate and train customers how to use their system properly, • Create and build strong relationships with customers, provide remarkable service, and surpass customers’ expectations, • Communicating with customers and managers regarding service findings is essential, ensuring customer satisfaction., • Keep track of service calls, • Represent the company by serving as the direct customer contact for our products and equipment, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location., • Display team effort and dedication to customer by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight work, • Keep the management team in loop about customer’s satisfaction, any potential sales opportunities and any recurring problems, • Other tasks as assigned, • Possess and respect a safety-first attitude Qualifications: • US work authorization, • A High School Diploma or equivalent is required, and typically 2 plus years of experience in HVAC. Technical School or formal training is preferred., • This position is highly physical and requires regular use of hands, stooping, kneeling and climbing ladders. It requires employees to regularly lift and/or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs., • This role may involve exposure to variable weather conditions, moving mechanical parts, heights, noisy operating equipment and other variable environmental conditions based on location, • Strong organizational skills, positive attitude and an ability to learn and grow quickly, • Must be capable of working independently or in a team, • Confident, articulate and professional speaking abilities., • Ability to travel and work overtime/weekend as needed, • Ability to review plans, diagrams and flow charts, • Demonstrate a high level of trouble shooting skills, critical thinking and problem solving skills, • A general knowledge of electronics is required, • Valid driver’s license and clean DMV record, • Strong knowledge of relative safety standard/good practice and willingness to use PPE, • EPA certification and OSHA certification preferred Compensation: • Competitive salary, • Medical/dental/vision insurance, • Retirement plan BROAD U.S.A. is an equal opportunity employer

Job DescriptionDescription: Benefits • Sign-On Bonus on qualified experience, Discretionary Quarterly bonuses & recruiting incentives, • Company van + gas card for eligible techs, • Paid training and career advancement, • Medical, Dental, Vision + 401K match, • Opportunity within a growing organization to grow your career Position Summary The Senior Commercial HVAC Technician is responsible for performing expert-level service, maintenance, installation, and diagnostics on complex commercial HVAC systems. This role acts as a technical leader in the field, supports large-scale commercial projects, and mentors less experienced technicians. The Senior Technician ensures all work meets safety, quality, and compliance standards while providing exceptional customer service to commercial clients. Key Responsibilities • Diagnose, repair, and maintain complex commercial HVAC systems including RTUs, VAV systems, heat pumps, VRF/VRV systems, boilers, chillers, cooling towers, air handlers, and ventilation systems., • Lead advanced troubleshooting, root-cause analysis, and major component replacements., • Perform commercial system installations, start-ups, commissioning, and retrofits according to manufacturer specifications and project requirements., • Conduct detailed preventive maintenance and provide recommendations for system improvements, energy efficiency, and lifecycle upgrades., • Ensure all work adheres to company standards, project specifications, OSHA safety regulations, and local building codes., • Provide coaching, technical guidance, and on-the-job training to junior and mid-level technicians., • Work closely with dispatch, project managers, and estimators to support scheduling, work planning, and customer communication., • Build strong client relationships and communicate findings, options, and recommendations clearly and professionally., • Complete accurate documentation of service reports, time entries, parts usage, and job progress., • Maintain company tools, equipment, and service vehicle in safe operating condition. Qualifications • 10+ years of commercial HVAC service and/or installation experience required., • Strong proficiency with commercial systems including chillers, boilers, VRF/VRV, and complex control systems., • EPA Universal Certification required., • Technical school, trade certification, or completed HVAC apprenticeship highly preferred., • Ability to read and interpret commercial blueprints, plans, and control schematics., • Exceptional diagnostic skills and proven ability to resolve complex system issues independently., • This position requires a valid driver’s license., • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE #EN

Job Description Job Summary The Small Engine Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of landscaping and construction equipment, including two-stroke and four-stroke engines, compact equipment, and handheld tools. Key Responsibilities: · Inspect, diagnose, and repair small engines, including lawnmowers, chainsaws, trimmers, blowers, generators, and snow blowers. · Perform routine maintenance, including oil changes, air filter replacements, carburetor adjustments, and spark plug installations. · Troubleshoot electrical, fuel, and mechanical systems to ensure optimal equipment performance. · Maintain service records and track completed repairs using internal systems. · Order necessary parts and ensure inventory is maintained for common repairs. · Communicate clearly with supervisors and operators about equipment status and timelines. · Maintain a clean, organized, and safe work environment. · Assist in seasonal equipment prep and winterization. Qualifications · High school diploma or equivalent; trade school or technical certification preferred. · Minimum of 2 years' experience repairing small engines or related mechanical work. · Strong knowledge of gas-powered and diesel-powered small engines, hydraulic systems, and two- and four-cycle engines. · Ability to read and interpret schematics and service manuals. · Valid driver's license with clean driving record. · Ability to lift 50 lbs and work in various weather conditions. Preferred Skills · Experience with landscaping or construction equipment. · Welding and fabrication skills a plus. · Bilingual (Spanish/English) is a plus. · OSHA 10/30 certification preferred, or willingness to obtain. Schedule & Compensation • Full-time position | Monday–Friday, 7:00 AM – 3:30 PM, • Pay: $24-32 hourly (Depending experience, certifications, and licensing)

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash