Trabajos aircraft mechanic en San Diego, CaliforniaCrear alertas

Required an Active Secret Clearance Title: V-22 Aircraft Maintenance and Modification Technician Level C Location: MCAS Miramar, CA 92145 Type & Duration: 12 Months of contract Shift: 07:00 AM to 04:00 PM Ability to travel 30% Position Responsibilities: • MV-22 Modification & Maintenance Teams, • Must be knowledgeable in aspects of V-22 aircraft maintenance, modification and repair to include skill and experience in either Electrical and Avionics or Airframes system subject areas., • Candidate must have knowledge of general aircraft maintenance and environment processes (FOD control, tool control, health & safety). Your duties will include (but are not limited to): • Independently assembles, disassembles and fixes numerous assemblies by changing, removing and replacing aerospace components, using general aerospace maintenance practices and aerospace product specifications to correct failures., • Removes and replaces components for repair, replacement or testing, to support product serviceability., • Resolves and corrects routine problems during operation, maintenance and overhaul of deliverable products., • Coordinates assembly, disassembly or overhaul functions to ensure adequacy, accuracy and thoroughness of product assembly, disassembly and overhauls., • Independently performs routine and complex functional/diagnostic tests and solves problems aerospace/missile systems, using monitoring instruments and bench/automated test equipment, to resolve root cause of initial or isolated failures., • Performs validation/verification testing of systems and components to ensure serviceability., • Solves problems for customers, using established fault isolation procedures, in order to isolate routine mechanical or electrical faults., • Fixes with limited/little engineering or co-worker assistance., • Calls out repairs, however consults engineering and customer with results, if needed., • Independently documents repairs, test results, applicable modifications and inspection results, using specific, detailed instructions and established processes and procedures, to ensure contractual and regulatory compliance., • Verifies and ensures correctness of detailed instructions and procedures to modify, fix, repair and test assemblies., • Assists engineering to rectify discrepancies found by technicians., • Properly identifies discrepancies found with parts and assists with reconciliation of discrepancies., • Visually inspects component before installation or usage to verify cleanliness and serviceability of components., • Identifies and documents discrepancies found during inspection., • Independently performs modifications to satisfy deliverable products., • Ensures adequacy, accuracy and thoroughness of product modification. Required Skills: • Experience with V-22 Maintenance/Modification, • At the sole discretion of leadership, must be willing and able (on potentially short-notice) to travel to a variety of locations (domestic, Military Bases CONUS plus Hawaii) and for a variety of durations to meet customer needs and the statement of work. Preferred Skills: • FAA Airframe and Powerplant License preferred., • Quality Assurance experience preferred, • Extensive Depot-level modification experience preferred Typical Education & Experience: • High school diploma or GED and typically 4 or more years' related experience or an equivalent combination of education and experience

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Power Plants (Plus Up) Location San Diego, CA Job Posting 113850 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Power Plants) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will be responsible for ensuring aircraft readiness, inspecting and repairing systems, and managing other mechanics to ensure tasks are completed on time Primary responsibilities include but are not limited to the following: Aircraft System Repairs & Rebuilds: Perform maintenance on aircraft structure, engines, gearboxes, rotor systems, and avionics. This includes using various tools (e.g., welding, sheet metal brakes, rivet guns, and drills) to ensure all components are properly maintained. Inspections & Troubleshooting: Conduct inspections (e.g., 175-hour, isochronal, and phase inspections), focusing on engine components, hydraulic systems, and more. Use testing equipment to assess engine function and replace damaged parts as needed. System Adjustments & Repairs: Adjust, repair, and replace electrical wiring systems and other accessories. Ensure all aircraft systems are in safe operating condition. Flight Support: Perform preflight, thru-flight, and post-flight maintenance inspections, ensuring the aircraft is properly serviced and safe for operation. Aircraft Handling: Participate in jacking, towing, and moving aircraft. Record all maintenance activities, ensuring safety of flight items are addressed. Leadership & Supervision: Assign tasks, monitor work completion, and ensure safety procedures are followed during repairs and inspections. You may also manage and supervise junior mechanics as needed. Specialization Areas: Potential for specialization in areas like engine repair, airframe maintenance, electrical systems, or armament. Safety & Quality Compliance: Follow safety procedures, maintain a clean work environment, and ensure compliance with quality standards. Participate in programs like FOD (Foreign Object Damage) prevention and Hazmat handling. Record Keeping & Documentation: Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Additional Duties: Maintain a clean and safe work environment (shop housekeeping). Obtain and maintain certifications: CDQAR (Collateral Duty Quality Assurance Representative). Participate in safety programs and ensure the proper disposal of hazardous materials. Manage or coordinate maintenance programs as assigned. Page 2 of 2 Qualifications and Experience: Education: High school diploma or equivalent. Experience: Minimum of three years of H-60 series aircraft maintenance experience (or equivalent rotary aircraft experience), with at least three years of experience as a CDI/CDQAR. MH60-R experience is preferred. Qualifications: Ability to obtain and maintain required qualifications in line with U.S. Navy maintenance guidelines. Security: Ability to obtain and maintain a Tier 3 Background Check (and possible secret clearance). Physical Requirements: Must meet the physical standards and pass a medical exam. Language: Must be able to read, write, and understand English. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 1500 Solana Blvd Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic II (Flight Mechanic) Location San Diego, CA Job Posting 113989 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 05/26/2026 Contract CFT HSM -41 North Island Salary Range $45.27/Hour Posting Date 04/20/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Flight Mechanic II (MH60-R) is a highly skilled professional responsible for performing all duties of a Functional Check Aircrewman on MH60-R helicopters. This role involves performing in-flight duties, assisting maintenance test pilots, troubleshooting, adjusting, and ensuring aircraft functionality both in the air and on the ground. The position is integral to the operation and maintenance of the MH60-R fleet, ensuring safe and effective flight operations in compliance with Navy standards. Primary responsibilities include but are not limited to the following: * In-Flight and Ground Operations: o Serve as a flight crew member for MH60-R helicopter operations, performing duties during day and night shifts. o Conduct in-flight observation, troubleshooting, and repairs, ensuring the aircraft is functioning properly during flight. o Perform aircraft functional checks, including run-ups and magnetic compass swings when necessary. o Operate specialized tracking and balancing equipment, hoists, cranes, and other tools required for functional assignments. * Aircraft Maintenance: o Perform regular aircraft mechanic duties when not engaged in flight mechanic responsibilities. o Conduct maintenance checks and perform maintenance operational checks (MOCs) and run-ups as needed. o Complete accurate maintenance documentation using the Integrated Maintenance Data System (IMDS) and other required forms. o Assist with removing and reinstalling cowlings, panels, and fairings as required for maintenance tasks. o Provide on-the-job training (OJT) to new personnel as assigned. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. * Support Duties: o Operate motor vehicles, equipment, and special tools as required by the assignment. o Maintain cleanliness and preservation of tools, vehicles, and equipment. Page 2 of 3 o Support flight line operations, including assisting with aircraft launch, recovery, and security. o Handle hazardous materials according to safety guidelines. o Perform imaging technology functions and document-related tasks as necessary. o Dispose of hazardous materials properly, as required by job duties. * Safety and Compliance: o Adhere to M1 safety culture, completing required training and participating in emergency response efforts. o Ensure compliance with M1 Quality Policy and the operational, safety, quality, and environmental standards for the role. Qualifications and Experience: * Education and Experience: o High school diploma or equivalent (GED). o At least 5 years of experience in a relevant maintenance position. o Must be qualified in Mission/Design/Series (MDS) for the MH60-R or have at least 4 years of experience with the MH60-R model. o Completed Naval Aircrew school and MH60-R Fleet Replacement Squadron (FRS) training. o Must meet all required training standards as specified by US Navy instructions (OPNAV/CNAF 3710). o Must hold a valid US government Common Access Card (CAC) or temporary DBIDS credential. o Must possess and maintain a favorably adjudicated Tier 3 Background Investigation (Secret Clearance required). o Must be able to obtain and maintain facility credentials/authorization. o Must hold a valid driver's license. o Must be able to pass a physical examination and meet FAA medical standards for flight duties (Class 1 and Class 2). o Must maintain class II swim qualification and complete Aviation Physiology and Water Survival Qualification. * Other Requirements: o Must be available to work flexible hours, including all shifts, as flight schedules dictate. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. Page 3 of 3 * Standing long period of time and minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Westlake, Texas, provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Aviation Ordnance (Plus Up) Location San Diego, CA Job Posting No 113843 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: Aircraft Mechanic I - Aviation Ordnance will be responsible for performing maintenance on various components of military aircraft, specifically focusing on H-60 series helicopters, including the MH60-R. Your duties will span across a variety of systems, including airframes, engines, avionics, landing gear, rotor systems, and more. Primary responsibilities include but are not limited to the following: 1. Aircraft System Repair & Rebuilding: o Perform repairs and rebuilds across all aircraft systems, including structure, engines, rotors, avionics, hydraulic units, and flight surfaces. o Use tools and equipment such as welders, drills, rivet guns, and sheet metal brakes to maintain aircraft parts. 2. Technical Document Interpretation: o Read and interpret maintenance manuals, technical data, and service bulletins to plan and execute repairs on malfunctioning or damaged aircraft components. 3. Aircraft Inspections & Testing: o Conduct regular maintenance inspections (175-hour, progressive, phase, and periodic Hourly and calendar inspections) to detect cracks, leaks, corrosion, or wear on components like engines, turbine blades, and hydraulic systems. o Use testing equipment for engine operations and replace damaged parts. 4. Flight Support Maintenance: o Perform preflight, thru-flight, and post-flight inspections. o Service aircraft (flushing gearboxes, cleaning filters, greasing moving parts, checking brakes). 5. Aircraft Handling: o Jack, tow, moving aircraft, spotting aircraft and maintain aircraft in safe operational condition. o Enter maintenance records and ensure all repairs are documented correctly. 6. Leadership & Supervision: o Lead and supervise junior mechanics, ensuring safety and quality during all tasks. 7. Specialization Areas: o Potential to specialize in areas like engine repair, airframe maintenance, or avionics. All MH60-R Aviation Ordnance 8. Safety & Quality Compliance: o Ensure compliance with all safety and quality procedures, including Hazmat handling and FOD (Foreign Object Damage) prevention. o Participate in safety programs and perform housekeeping duties in the shop. Page 2 of 3 o Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Additional Responsibilities: * Participate in Aviation Gas Free Program and obtain necessary support equipment licenses. * Comply with all safety protocols, training requirements, and emergency response duties. * Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). Qualifications and Experience: * Education: High school diploma or equivalent. * Experience: o Minimum 5 years of experience with H-60 series aircraft (or equivalent rotary aircraft experience). MH-60R experience preferred. o At least 5 years Aviation Ordnance, MH60-R CDI/CDQAR experience. * Certifications: Ability to obtain and maintain qualifications in line with U.S. Navy instructions (e.g., CDI, QAR). Ordnance certification shall be required to obtain. * Security Clearance: Must be able to pass and maintain a Tier 3 Background Check. Some roles may require a secret clearance. * Technical Skills: Ability to read and interpret technical data, manuals, and special operating instructions. * Language Skills: Must be able to read, write, and understand English. Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. * Must possess a valid state driver's license. Working Conditions: * Occasional lifting up to 50 pounds. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organizing skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. Page 3 of 3 * Standing long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Electronics (Plus Up) Location San Diego, CA Job Posting 113847 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Electronics) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will be responsible for ensuring aircraft readiness, inspecting and repairing systems, and managing other mechanics to ensure tasks are completed on time Primary responsibilities include but are not limited to the following: 1. Aircraft Maintenance: Overseeing repairs on aircraft systems (engine, gearbox, rotor, avionics, etc.) using appropriate tools and equipment. This includes structural work, rigging, surface controls, and hydraulic systems. 2. Certifications: CDQAR (Collateral Duty Quality Assurance Representative). 3. Inspection and Repair: Conducting regular inspections, including 175-hour, isochronal, and phase inspections, to identify issues such as cracks, leaks, corrosion, and other defects. 4. System Modifications and Adjustments: Adjusting, repairing, or replacing electrical wiring systems, accessories, and various aircraft components, ensuring aircraft remains mission-ready. 5. Leadership: Assigning tasks, monitoring progress, ensuring compliance with safety procedures, and managing a team of mechanics. 6. Recordkeeping: Maintaining accurate maintenance records and verifying that work was performed satisfactorily. 7. Specialization: Specializing in areas such as engine/airframe repair, and completing additional qualifications as necessary, including ordnance qualifications. 8. Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Page 2 of 2 Qualifications and Experience: * Experience: A minimum of 5 years of recent O-level H-60S/R/F/H aircraft maintenance or equivalent rotary aircraft experience, including 5 years of H60 CDQAR/QAR experience. * MH60-R Experience is preferred, along with prior experience with US Navy aircraft maintenance. * Leadership Experience: At least 2 years in a management or leadership role. * Technical Knowledge: Ability to interpret technical manuals and publications and perform complex repairs and inspections on aircraft systems. * Flexibility: Must be willing to work all shifts, as required by the flight schedule and tasking. * Security Clearance: Ability to obtain and maintain a Tier 3 Background Investigation and possibly a Secret Clearance. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Power Plants (Plus Up) Location San Diego, CA Job Posting No 113845 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic I (Power Plants) This is a maintenance role focused on the upkeep of H-60 series aircraft, including the MH60-R model. This role involves supporting the maintenance and repair of various aircraft systems, performing inspections, and ensuring the readiness of the aircraft in a fast-paced, mission-critical environment. As a Mechanic I you will be responsible for repairing and maintaining aircraft components, including engines, avionics, landing gear, hydraulic systems, flight surfaces, and more. You will work with hand and power tools, interpret technical data, and perform inspections and repairs as part of routine and emergency maintenance tasks. Additionally, you will be expected to handle specialized tasks such as engine testing and part replacements. Primary responsibilities include but are not limited to the following: * Aircraft System Repairs and Rebuilds: Perform maintenance on aircraft structure, engines, gearboxes, rotor systems, and avionics. This includes using various tools (e,g., welding, shear metal brakes, rivet guns, and drills) to ensure all components are properly maintained. * Inspections and Troubleshooting: Conduct inspections (e.g., 175-hour, isochronal, and phase inspections), focusing on engine components, hydraulic systems and more. Use testing equipment to assess engine function and replace damaged parts as needed. * System Adjustments and Repair: Adjust, repair, and replace electrical wiring systems and other accessories. Ensure all aircraft systems are in safe operating condition. * Flight Support: Perform pre-flight, thru-flight, and post flight maintenance inspections, ensuring the aircraft is properly serviced and safe for operation. * Aircraft Handling: Participate in jacking, towing, and moving aircraft. Record all maintenance activities, ensuring safety of flight items are addressed. * Specialization Areas: Potential for specialization in areas like engine repair, airframe maintenance, electrical systems, or armament. * Safety and Quality Compliance: Follow safety procedures, maintain a clean work environment, and ensure compliance with quality standards. Participate in programs like FOD (Foreign Object Damage) prevention and HAZMAT handling. * Record Keeping and Documentation: Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. * Leadership and Supervision: Assign tasks, monitor work completion, and ensure safety procedures are followed during repairs and inspections. In this role you may also manage and supervise junior mechanics as needed. Additional Duties: * Maintain a clean and safe work environment (shop housekeeping). * Obtain and maintain: Certification CDI (Collateral Duty Inspector) * Participate in safety programs and ensure the proper disposal of hazardous materials. * Manage or coordinate maintenance programs as assigned. Page 2 of 2 Qualifications and Experience: * Education: High school diploma or equivalent. * Language: Must be able to read, write, and understand English. * Experience: Minimum of three (3) years of H-60 series aircraft maintenance experience (or equivalent rotary aircraft experience), with at least three (3) years of experience as a CDI/CDQAR. * MH60-R experience is preferred. * Obtain necessary certifications like CDI (Collateral Duty Inspector) or QAR (Quality Assurance Representative) * Qualifications: Ability to obtain and maintain required qualifications in line with US Navy maintenance guidelines. * Must have strong leadership skills and the ability to work collaboratively with a diverse team, often in cross-cultural environments. * Proficiency with computer programs, including Word, Excel, Outlook, and NALCOMIS/OOMA. * Security: Required to obtain and maintain a favorably adjudicated Tier-3 Background Investigation and possible secret clearance. * Current valid U.S. Driver's License. Working Conditions: * Must be able to lift up to 50lbs. * Must meet the physical standards and pass a medical exam. * Ability to work under pressure and deadlines, with a need for strong organizational skills and mental alertness * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Electrician (Plus Up) Location San Diego, CA Job Posting No 113842 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic I (Electrician) The Aircraft Mechanic 1 (Electrician) is responsible for performing maintenance on various aircraft systems, including structural, engine, hydraulic, avionics, armament, and more. This role involves supporting operations with the U.S. Navy and foreign partners, maintaining the safety and readiness of military aircraft. You will work with multiple aircraft components, including landing gear, flight surfaces, ventilation systems, and rotor systems. Primary responsibilities include but are not limited to the following: * Aircraft Repairs & Systems Maintenance: Repair and rebuild components including aircraft structure, engine/gearbox/rotor system, and avionics. Work on blades, fuselage, rigging, hydraulic units, and more. * Inspection & Troubleshooting: Perform inspections such as 175-hour, phase, and periodic checks etc. Examine engines for issues such as cracks, corrosion, and leaks. * Component Testing & Repairs: Test engine operations, remove, repair, and reinstall engines, and replace faulty components like fuel pumps, generators, and magnetos. * Electrical & Accessory Maintenance: Repair and replace electrical wiring systems, aircraft accessories, and perform preflight, through-flight, and post-flight inspections. * Jacking & Towing: Participate in jacking, towing, and moving aircraft as necessary, keeping detailed maintenance records. * Specialization: Focus on areas like engine repair, airframes, electrical, or armament repair. * Leadership: Supervise and ensure adherence to safety and quality standards. Monitor maintenance tasks and work quality, ensuring the aircraft remains mission ready. * Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Additional Duties: * Maintain a clean and safe work environment (shop housekeeping). * Comply with safety standards and handle the proper disposal of hazardous materials. Qualifications and Experience: * Education: High school diploma or equivalent. * Language: Must be able to read, write, and understand English. * Experience: Minimum of three (3) years of H-60S/R/F/H series aircraft maintenance experience (or equivalent rotary aircraft experience), including experience as a CDI/CDQAR. Page 2 of 2 * MH60-R experience is highly preferred. * Qualifications: Must meet requirements outlined in CNAFINST 4790.2 and local work site instructions, and complete Personal Qualification Standards (PQS) as necessary. * Technical Skills: Proficiency with computer programs (Word, Excel, PowerPoint, Outlook, NALCOMIS/OOMA). Ability to read and interpret technical publications and operating instructions. * Clearance and Licensing: Required to obtain and maintain a favorably adjudicated Tier-3 Background Check. Common Access Card (CAC), and necessary facility credentials. * Security: Successful completion of a pre-employment drug screen and possible medical exam. Working Conditions: * Must be able to lift up to 50lbs. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eyesight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills. Must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for long periods of time and minimal sitting. * Ability to work under extreme weather conditions. * Ability to meet physical demands and pass any required medical examinations. * Work site has head, hand, hearing, eye, slip and trip hazards. Proper PPE shall be used and proper safety procedures followed. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic III (Plus Up) Location San Diego, CA Job Posting 113851 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM -41 North Island Salary Range $47.49/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic 3 is responsible for overseeing the maintenance and safety of aircraft, ensuring they are released as safe for flight. This position involves managing all shop tasks, assigning workloads, and maintaining proper manning in work centers. The mechanic will perform a wide range of maintenance, from structural and engine repairs to inspecting systems such as hydraulic, flight controls, and auxiliary power units. The role also includes working with foreign cultures and participating in team leadership for maintenance operations. Primary responsibilities include but are not limited to the following: * Aircraft Repairs & Maintenance: o Perform repairs on aircraft structures and functional components, including rigging, surface controls, and hydraulic units. o Use hand tools, power tools, and machines to repair and rebuild parts such as blades, fuselage, and gearboxes. o Inspect turbine engines for cracks, corrosion, wear, and other damage, and test engine operations using specialized equipment. o Remove, repair, and reassemble engine components. * Aircraft Inspections: o Perform 175-hour, progressive, isochronal, phase, periodic, and other inspections. o Inspect engines, structural components, and other aircraft systems for wear, corrosion, or other defects. o Service aircraft, including gearbox flushing, cleaning filters, greasing moving parts, and checking brakes. * Documentation & Compliance: o Accurately document maintenance activities in NALCOMIS/OOMA and ensure all inspections are recorded properly. o Follow local work site instructions and Navy regulations for maintenance and safety. * Leadership & Team Coordination: o Supervise and assign tasks to team members, ensuring safety and quality standards are met. o Manage shop operations and ensure proper manpower is allocated to various maintenance tasks. * Hazmat Handling & Safety: o Handle hazardous materials (Hazmat) in accordance with safety protocols. o Participate in the FOD program, maintaining a clean and safe work environment. o Comply with all safety requirements and guidelines for aircraft maintenance. Page 2 of 3 Qualifications and Experience * Experience: o 10 years of recent O-level H-60S/R/F/H Aircraft Maintenance or equivalent rotary aircraft experience. o 5 years of H60 Safe for Flight (release aircraft safe to fly) and CDQAR/QAR experience, with at least 2 years in management capacity. * Skills & Qualifications: o Ability to read, interpret, and apply technical data and special operating instructions. o Proficiency in using computer programs such as NALCOMIS/OOMA, Word, Excel, PowerPoint, and Outlook. o Good leadership and communication skills. o Ability to obtain and maintain all necessary qualifications and certifications. * Other Requirements: o Ability to work flexible shifts based on flight schedules. o Must be able to pass a pre-employment drug screen. o Must be able to meet physical requirements associated with assigned tasks. o Must be able to obtain a US government Common Access Card (CAC) and meet background investigation requirements. * Preferred Qualifications: o Prior experience with MH60 Safe for Flight (release aircraft safe to fly). o Experience in U.S. Navy aircraft maintenance operations. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing long periods of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per- week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Page 3 of 3 M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Airframes (Plus Up) Location San Diego, CA Job Posting 113846 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Airframes) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will also perform inspections, troubleshooting, and repairs for both structural and functional components, while managing other mechanics to ensure timely task completion Primary responsibilities include but are not limited to the following: * Aircraft Maintenance: Repair and rebuild aircraft systems, including engines, avionics, hydraulics, and structural components. Perform troubleshooting, inspections, and repairs as required. * Leadership: Manage and supervise mechanics, ensuring timely completion of tasks and compliance with safety standards. You will also approve time cards for team members. * Technical Expertise: Interpret technical manuals and data to determine repair methods. Perform various types of inspections on engines, systems, and components. * Specialized Areas: You may specialize in specific areas, such as engine, airframe, electrical, or armament repair. You will be responsible for modifications, inspections, and keeping aircraft in safe, mission-ready condition. * Support Equipment Compliance: Ensure that Technical Directives (TDs) are followed for aircraft maintenance and equipment management. Ensure compliance with safety and quality standards. * Safety & Quality: Ensure that all safety and quality procedures are adhered to, including hazardous materials handling, FOD prevention, and completing required training. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) Page 2 of 3 Qualifications and Experience: * Education & Experience: High school diploma or equivalent, with at least eight (8) years of recent experience in rotary aircraft maintenance, specifically with the H-60 series (including experience as a CDQAR/QAR). * MH60-R experience is preferred, along with prior experience in U.S. Navy aircraft maintenance. * Leadership: At least two years of management experience overseeing a team of mechanics. * Technical Knowledge: Ability to interpret complex technical manuals, perform inspections, and use specialized tools/equipment. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) equivalent experience.and complete aviation ordnance qualifications. * Ability to obtain a Tier 3 Background Investigation and possibly a Secret Clearance. * Shift Flexibility: Availability to work all shifts as needed based on flight schedules and task requirements. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. Page 3 of 3 * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 1500 Solana Blvd Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic III Location San Diego, CA Job Posting 113982 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 05/26/2026 Contract CFT HSM -41 North Island Salary Range $47.49/Hour Posting Date 04/16/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic 3 is responsible for overseeing the maintenance and safety of aircraft, ensuring they are released as safe for flight. This position involves managing all shop tasks, assigning workloads, and maintaining proper manning in work centers. The mechanic will perform a wide range of maintenance, from structural and engine repairs to inspecting systems such as hydraulic, flight controls, and auxiliary power units. The role also includes working with foreign cultures and participating in team leadership for maintenance operations. Primary responsibilities include but are not limited to the following: * Aircraft Repairs & Maintenance: o Perform repairs on aircraft structures and functional components, including rigging, surface controls, and hydraulic units. o Use hand tools, power tools, and machines to repair and rebuild parts such as blades, fuselage, and gearboxes. o Inspect turbine engines for cracks, corrosion, wear, and other damage, and test engine operations using specialized equipment. o Remove, repair, and reassemble engine components. * Aircraft Inspections: o Perform 175-hour, progressive, isochronal, phase, periodic, and other inspections. o Inspect engines, structural components, and other aircraft systems for wear, corrosion, or other defects. o Service aircraft, including gearbox flushing, cleaning filters, greasing moving parts, and checking brakes. * Documentation & Compliance: o Accurately document maintenance activities in NALCOMIS/OOMA and ensure all inspections are recorded properly. o Follow local work site instructions and Navy regulations for maintenance and safety. * Leadership & Team Coordination: o Supervise and assign tasks to team members, ensuring safety and quality standards are met. o Manage shop operations and ensure proper manpower is allocated to various maintenance tasks. * Hazmat Handling & Safety: o Handle hazardous materials (Hazmat) in accordance with safety protocols. o Participate in the FOD program, maintaining a clean and safe work environment. o Comply with all safety requirements and guidelines for aircraft maintenance. Page 2 of 3 Qualifications and Experience: * Experience: o 10 years of recent O-level H-60S/R/F/H Aircraft Maintenance or equivalent rotary aircraft experience. o 5 years of H60 Safe for Flight (release aircraft safe to fly) and CDQAR/QAR experience, with at least 2 years in management capacity. * Skills & Qualifications: o Ability to read, interpret, and apply technical data and special operating instructions. o Proficiency in using computer programs such as NALCOMIS/OOMA, Word, Excel, PowerPoint, and Outlook. o Good leadership and communication skills. o Ability to obtain and maintain all necessary qualifications and certifications. * Other Requirements: o Ability to work flexible shifts based on flight schedules. o Must be able to pass a pre-employment drug screen. o Must be able to meet physical requirements associated with assigned tasks. o Must be able to obtain a US government Common Access Card (CAC) and meet background investigation requirements. * Preferred Qualifications: o Prior experience with MH60 Safe for Flight (release aircraft safe to fly). o Experience in U.S. Navy aircraft maintenance operations. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing long periods of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per- week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Page 3 of 3 M1 Support Services, headquartered in Westlake, Texas, provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Electronics (AT) (Plus Up) Location San Diego, CA Job Posting No 113841 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic I - Electronics (AT) will perform maintenance on various aircraft systems including structure, landing gear, flight surfaces, hydraulic systems, engines, avionics, armament, rotor systems, and others. This position involves working with multi-national teams, and ensuring safe and mission-ready aircraft operations.Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Primary responsibilities include but are not limited to the following: * Aircraft Repairs: o Maintenance on engine/gearbox/rotor systems, avionics, fuselage, rigging, plumbing, and hydraulic systems. * Technical Knowledge: o Interpret maintenance manuals, specifications, and service bulletins for repairs and replacements. * Engine Inspections & Repairs: o Conduct inspections, remove, repair, or replace defective engine parts, documentation of all tasking in OOMA. * Electrical & Aircraft Systems: o Adjust, repair, and replace electrical wiring and aircraft accessories. * Record Keeping: o Accurately document all maintenance performed in compliance with regulations. * Leadership: o Ensure safety and quality in maintenance activities and monitor subordinates. * Specializations: o May specialize in engine repair, airframes, electrical, or armament. o Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). o Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Qualifications and Experience: * Experience: o 3+ years of recent experience in H-60S/R/F/H aircraft maintenance, including CDI/CDQAR experience. ALFS qualification is required. * Technical Knowledge: o In-depth knowledge of applicable aircraft, maintenance manuals, and systems. * Clearance: o Must obtain and maintain a T3 background check, and some positions may require a secret clearance. * Physical Requirements: o Must meet medical and physical fitness standards. Page 2 of 2 * Shift Flexibility: o Must be available to work on shifts, based on flight schedules and operational needs. * Experience with MH60-R aircraft highly preferred. Working Conditions: * Must be able to lift up to 50lbs. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eyesight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills. Must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for long periods of time and minimal sitting. * Ability to work under extreme weather conditions. * Ability to meet physical demands and pass any required medical examinations. * Work site has head, hand, hearing, eye, slip and trip hazards. Proper PPE shall be used and proper safety procedures followed. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 1500 Solana Blvd Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic I - Power Plants Location San Diego, CA Job Posting No 113971 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 05/18/2026 Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 04/10/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic I (Power Plants) This is a maintenance role focused on the upkeep of H-60 series aircraft, including the MH60-R model. This role involves supporting the maintenance and repair of various aircraft systems, performing inspections, and ensuring the readiness of the aircraft in a fast-paced, mission-critical environment. As a Mechanic I you will be responsible for repairing and maintaining aircraft components, including engines, avionics, landing gear, hydraulic systems, flight surfaces, and more. You will work with hand and power tools, interpret technical data, and perform inspections and repairs as part of routine and emergency maintenance tasks. Additionally, you will be expected to handle specialized tasks such as engine testing and part replacements. Primary responsibilities include but are not limited to the following: * Aircraft System Repairs and Rebuilds: Perform maintenance on aircraft structure, engines, gearboxes, rotor systems, and avionics. This includes using various tools (e,g., welding, shear metal brakes, rivet guns, and drills) to ensure all components are properly maintained. * Inspections and Troubleshooting: Conduct inspections (e.g., 175-hour, isochronal, and phase inspections), focusing on engine components, hydraulic systems and more. Use testing equipment to assess engine function and replace damaged parts as needed. * System Adjustments and Repair: Adjust, repair, and replace electrical wiring systems and other accessories. Ensure all aircraft systems are in safe operating condition. * Flight Support: Perform pre-flight, thru-flight, and post flight maintenance inspections, ensuring the aircraft is properly serviced and safe for operation. * Aircraft Handling: Participate in jacking, towing, and moving aircraft. Record all maintenance activities, ensuring safety of flight items are addressed. * Specialization Areas: Potential for specialization in areas like engine repair, airframe maintenance, electrical systems, or armament. * Safety and Quality Compliance: Follow safety procedures, maintain a clean work environment, and ensure compliance with quality standards. Participate in programs like FOD (Foreign Object Damage) prevention and HAZMAT handling. * Record Keeping and Documentation: Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. * Leadership and Supervision: Assign tasks, monitor work completion, and ensure safety procedures are followed during repairs and inspections. In this role you may also manage and supervise junior mechanics as needed. Additional Duties: * Maintain a clean and safe work environment (shop housekeeping). * Obtain and maintain: Certification CDI (Collateral Duty Inspector) * Participate in safety programs and ensure the proper disposal of hazardous materials. * Manage or coordinate maintenance programs as assigned. Page 2 of 2 Qualifications and Experience: * Education: High school diploma or equivalent. * Language: Must be able to read, write, and understand English. * Experience: Minimum of three (3) years of H-60 series aircraft maintenance experience (or equivalent rotary aircraft experience), with at least three (3) years of experience as a CDI/CDQAR. * MH60-R experience is preferred. * Obtain necessary certifications like CDI (Collateral Duty Inspector) or QAR (Quality Assurance Representative) * Qualifications: Ability to obtain and maintain required qualifications in line with US Navy maintenance guidelines. * Must have strong leadership skills and the ability to work collaboratively with a diverse team, often in cross-cultural environments. * Proficiency with computer programs, including Word, Excel, Outlook, and NALCOMIS/OOMA. * Security: Required to obtain and maintain a favorably adjudicated Tier-3 Background Investigation and possible secret clearance. * Current valid U.S. Driver's License. Working Conditions: * Must be able to lift up to 50lbs. * Must meet the physical standards and pass a medical exam. * Ability to work under pressure and deadlines, with a need for strong organizational skills and mental alertness * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Westlake, Texas. provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Airframes (Plus Up) Location San Diego, CA Job Posting No 113844 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic I (Airframes) role involves performing maintenance on aircraft systems, including structures, landing gear, flight surfaces, engines, avionics, hydraulic systems, and more, as part of the HSM-41 Navy or Multi-Foreign component. This position works closely with foreign and U.S. personnel to maintain and ensure aircraft safety and mission readiness. Primary responsibilities include but are not limited to the following: * Aircraft Maintenance & Repair: o Repair and rebuild aircraft systems (structure, engines, rotor systems, avionics, etc.). o Work with tools such as shears, welding equipment, rivet guns, drills, and more to ensure proper maintenance of systems. o Handle and repair components like hydraulic units, plumbing, and surface controls. * Inspection & Troubleshooting: o Perform 175-hour, isochronal, phase, and periodic inspections. o Examine engines for cracks, corrosion, leaks, and other defects; test engine operations and repair or replace components as needed. o Inspect and service various aircraft parts including turbines, generators, fuel pumps, and more. * Electrical & Accessory Maintenance: o Perform repairs and replacements of electrical wiring systems and aircraft accessories. o Conduct preflight, through-flight, and post-flight maintenance inspections. o Service the aircraft by cleaning filters, greasing parts, and ensuring brake and corrosion prevention. * Jacking, Towing & Records: o Participate in aircraft jacking and towing. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. * Leadership & Specialization: o May specialize in specific areas such as engines, airframes, electrical, or armament repair. o Monitor safety procedures and ensure the aircraft remain in safe, mission-ready condition. * Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). * Other Responsibilities: o Housekeeping in the work area. o Participate in FOD (Foreign Object Damage) program. o Handle hazardous materials (Hazmat) and work in compliance with safety requirements. o Obtain necessary licenses for specialized equipment. Page 2 of 3 Qualifications and Experience: * Education & Experience: o High school diploma or equivalent. o Minimum of 3 years of H-60S/R/F/H Aircraft Maintenance experience or equivalent rotary aircraft maintenance experience. o Experience with MH60-R Aircraft highly preferred. o Minimum of 3 years of experience as CDI/CDQAR (Collateral Duty Inspector/Quality Assurance Representative) for H-60 aircraft. * Technical Skills: o In-depth knowledge of aircraft and maintenance procedures. o Ability to read and interpret technical data, manuals, and special operating instructions. * Certifications: o Must be able to obtain and maintain CDI or QAR qualifications. o Must be able to obtain and maintain all required qualifications as per CNAFINST 4790.2 (series). * Clearance & Licensing: o Must be able to obtain and maintain a T3 Security Clearance. o Must be able to obtain a Common Access Card (CAC). o Must have a valid state driver's license. * Work Schedule: o Ability to work all shifts as per the flight schedule. o Flexibility in start and end times based on operational needs. * Language Skills: Must be proficient in reading, writing, and understanding English. Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. Working Conditions: * Occasional lifting up to 50 pounds. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organizing skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper Page 3 of 3 safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Electrician (Plus Up) Location San Diego, CA Job Posting 113848 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Electrician) you will be responsible for maintaining and repairing various aircraft systems, including landing gear, flight controls, engines, avionics, armament, rotor systems and more. You will also manage other mechanics to ensure timely task completion Primary responsibilities include but are not limited to the following: 1. Aircraft System Repair and Rebuild: Works on aircraft systems including engines, gearboxes, avionics, structural components, hydraulic units, surface controls, and more. Utilizes hand tools, power tools, and machinery like welders, drills, and rivet guns. 2. Inspection and Maintenance: Performs inspections on aircraft (including 175-hour, progressive, isochronal, and phase inspections), and works on engine components to detect cracks, corrosion, oil leaks, etc. 3. Electrical and Avionics: Adjusts, repairs, and replaces electrical systems, aircraft accessories, and avionics. 4. Operational Maintenance: Performs pre-flight, in-flight, and post-flight maintenance, and supports aircraft systems like the gearbox, brakes, and moving parts. 5. Leadership: Manages a team of mechanics, monitors progress, and ensures tasks are completed efficiently. Approves timecards for mechanics under their leadership. 6. Specialization: Mechanic 2 may specialize in specific areas like engine, airframe, electrical, or armament repair. 7. Technical Directive and Compliance: Ensures compliance with Technical Directives (TD) for aircraft and support equipment. 8. Work Flexibility: Must be available to work all shifts depending on flight schedules and operational needs. 9. Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. 10. Obtain and maintain certifications: CDQAR (Collateral Duty Quality Assurance Representative) 11. Must be able to work all shifts. Full time employment; but 40 hour is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. 12. Participation in the Foreign Object Damage (FOD) program. 13. Handling hazardous materials and complying with safety regulations. Page 2 of 3 14. Potential participation in the Aviation Gas-Free program. 15. Completion of qualifications for various programs and support equipment. Qualifications and Experience: * Experience: At least five (5) years of recent H-60S/R/F/H Aircraft Maintenance experience or equivalent rotary aircraft experience. * Management Experience: A minimum of two (2) years of management experience. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) * Technical Proficiency: In-depth knowledge of aircraft technical data, manuals, and publications. * Foreign Operations: Must be able to work with international teams and in diverse cultural environments. * Computer Skills: Proficiency in Word, Excel, PowerPoint, Outlook, and aircraft maintenance systems. * Security: Ability to obtain and maintain a U.S. Government Common Access Card (CAC) and a favorable background investigation. * Physical Requirements: Ability to meet medical and physical standards. * High school diploma or equivalent. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. Page 3 of 3 M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Job Description GENERAL DESCRIPTION Aircraft Mechanic Electricians troubleshoot, repair, overhaul, modify, test, and calibrate, instruments of multiple component design. The items serviced at this level are interdependent electrical, mechanical, pneumatic, hydraulic, and/or electronic units and devices that detect, measure, record, indicate or regulate velocity, pressure, displacement, weight, temperature, airspeed, torque, resistance, voltage, and similar values and relationships. This job is at a Depot Level repair facility performing maintenance on aircraft equipment, which include, but not limited to, F/A-18, E-2/C-2, H-1, F-35 AND V-22. Military aviation experience is a plus. DUTIES • Performs a variety of electrical trade functions such as testing, troubleshooting, overhauling and/or repairing of items such as generators, actuators, van-axial fans, transformer-rectifiers, supervisory controls, relaying systems, and related controls containing printed and miniaturized electronic control circuitry., • Work from technical publications, technical drawings, schematics, layouts, or other specifications., • Set up and operate computer-controlled automatic test equipment (ATE) to run established and new diagnostic programs in various operational and functional test modes to perform pretest or final checkout of the electrical/electronic and interrelated systems., • Use a variety of electrician's hand tools and measuring and testing equipment., • Repair, modify, and replace defective components using the latest techniques in basic, micro, miniature and/or micro-miniature soldering. Ability to prototype and review new overhaul and test procedures on new items being introduced into the workload., • High School Diploma or equivalent., • Must have at least three (3) year of relevant experience as an, • Aircraft Electrician (with military experience) preferred., • Ability to read technical publications, schematics, engineering and manufacturer specifications., • Use various types of equipment to include voltmeters, frequency meters, ohmmeters, meggers, oscilloscopes, inductance and capacitance testers, frequency counters, and specialized test equipment to troubleshoot malfunctions to the lowest circuit element on single or multiple layer printed circuit boards., • Up to 25% travel may be required, • Must be a US Citizen., • Must have or be able to obtain a secret clearance. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Functional Requirements: • Must be able to walk, stand, crawl, kneel and bend on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands., • Must be able to crouch, crawl, grasp, pull over hand, push, reach or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 44 pounds and heavy, moderate carrying up to 44 pounds., • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales with or without corrective lens., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color, shades of color and judge three-dimensional depth., • Work in an inside/outside environment to include working around machinery, objects, vehicles, ladders, and scaffolds., • Excessive noise and vibration that can be intermittent or constant., • Environmental conditions can included but not limited to dust, silica, asbestos, fumes, smoke, gas, solvents such as degreasing agents, grease, oils, and electrical energy, • Working on slippery or uneven surfaces, • Working closely with others or working alone TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

US Department of Defense - - Responsibilities: Perform aircraft structural maintenance and repair to aircraft structures and components of various complexities and configurations; Apply knowledge of materials, tools and equipment required for sheet metal work; Interpret technical drawings, blueprin

Sheet Metal Mechanic (Aircraft). You will serve as a Sheet Metal Mechanic (Aircraft) in the MRO Production Department of FLEET READINESS CENTER SOUTHWEST.

You will perform aircraft structural maintenance and repair to aircraft structures and aircraft components of various complexities and configurations. Aircraft Structural Maintenance And Repair.

You will independently perform the full range of aircraft sheet metal mechanic duties, including the most complex repairs and fabrications on various aircraft types. Aircraft Sheet Metal Mechanic Duties. You will remove fixed sheet metal and composite structures from aircraft and disassemble structu

A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical compo

Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. This mechanic maintains repa

Minimum of three (3) years actual and recent O level H-60S/R Aircraft Maintenance experience or equivalent rotary aircraft experience as a rated Aircraft Structural Mechanic (AM). Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and po

Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex ele

A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical compo

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowl

Leadership ability is required, assign and monitor; Ensure safety procedures are followed for the following: adjustment, repairs, or replace any aircraft system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to servic

Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Must have a thorough knowled

You will independently perform the full range of aircraft sheet metal mechanic duties, including the most complex repairs and fabrications on various aircraft types. Performing a full range of aircraft sheet metal mechanic duties, which include complex repairs and fabrications on various aircrafts;.

Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms. Minimum 4 years of aircraft mechanic experience. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.

You will perform aircraft structural maintenance and repair to aircraft structures and aircraft components of various complexities and configurations. Performing a full range of aircraft sheet mental mechanic duties, which include complex repairs and fabrications on various aircrafts;. You must be a

Additional qualification information can be found from the following Office of Personnel Management web site: Federal Wage System Job Grading Standard for Aircraft Engine Mechanic, 8602 (opm. You must be able to travel on military and commercial aircraft for extended periods of time. The Screen-out

Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing gearbox, cleaning screens and filters, greasing moving parts, checking brak

FOR WG-10: 1) Performing a full range of aircraft sheet mental mechanic duties, which include complex repairs and fabrications on various aircrafts; 2) Analyzing and troubleshooting aircraft metal structures and components to determine repairs or replacements; 3) Developing solutions for complex met

Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft

Performs all Aircraft Mechanic duties when not performing Flight Mechanic duties. The employee must have the ability to perform aircraft maintenance duties and move freely about the interior & exterior of the aircraft as well as meet aircraft specific specifications for weight limits. The Aircraft M

A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical compo

Job duties require that this Mechanic II adjusts, repairs, and replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, and miscellaneous duties to include servicing aircraft, including flushing gearbox, cleaning screens an

Inspect aircrafts for any component defects, break-outs, fluid leakages, etc. Perform routine maintenance and cleaning of aircraft interiors and exteriors. Inspect aircraft engine for cracks and leaks.

Job DescriptionJob Description: Shield AI is seeking a candidate to lead the seamless integration of complex systems into our vehicle's confined spaces. In this high-ownership role, you'll lead the systems layout on the vehicle, collaborating closely with cross-functional teams to optimize size, weight, and cost. This involves managing the product structure, creating diverse zonal configurations, and spearheading iterative design discussions with key stakeholders to deliver a cohesive final product. This is your chance to design at the edge of innovation and autonomy, making a real-world impact. What You'll Do • Lead vehicle systems layout configuration., • Design, analyze and procure all secondary support structure on vehicle., • Create and manage the product structure., • Drive iterative subsystem design discussions with key stakeholders to ensure a cohesive final product., • Manage physical and electrical interfaces across stakeholder teams.Required Qualifications, • Bachelor's or Master's degree in Aerospace Engineering or Mechanical Engineering, • Knowledge of aircraft systems (e.g., avionics, flight controls, hydraulics, electrical power distribution, environmental control systems, propulsion)., • Strong CAD skills (NX preferred) with integration experience, • Ability to work independently and as part of a highly collaborative team in a fast-paced environment.Preferred Qualifications, • Clean Sheet Design to first flight experience, • Experience with UAVs, aircraft, or robotic systems, • Proven experience leading technical integration efforts and collaborating with multidisciplinary teams., • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Hands-on machine shop or mechanic experience (professional or hobby)

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking an engineering manager of Mechanical Design to support the development of our next-generation autonomous UAV platform. In this high-ownership, high visibility role you will lead a team of engineers developing mechanical systems to support Shield AI’s next generation aircraft program(s). You will work the director of engineering in a deputy capacity to support collaboration across engineering sites, align technical leaders, create mentorship opportunities for junior engineers, and assist in leveling engineering resources across vehicles and programs. You will set the bar for excellence through technical demonstration, guidance, and mentorship. What you'll do: • Support design reviews by providing feedback and signoff., • Scope resources to support aircraft development., • Assign individuals to projects and rebalance needs as required., • Create processes and documentation that guide the development of systems.Required qualifications:, • B.S. in Mechanical/Aerospace Engineering, • Demonstrable and successful leadership experience including hiring, budgeting,, • 7+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to others Preferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, structural, or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Are you a passionate and innovative product design engineer looking to help develop state of the art AI and aircraft products? Are you eager to make a positive difference in the world? Do you want to work alongside mission driven and values focused teammates? Shield AI is just the place for you! As a Mechanical Engineer, you will be responsible for contributing to the mechanical design and development of Shield AI's autonomous UAV products. You will help architect new products, perform the detailed design of complex electro-mechanical assemblies, and will use best in class design and analysis tools. You will collaborate closely with internal and/or external partners to prototype, test and release products to production. You will also help ensure product features achieve performance, schedule and reliability goals. What you'll do: • Design complex mechanical mechanisms for autonomous aircraft, • Own the full design process: concept, CAD, tolerance analysis, material selection, and drawing release, • Perform structural and kinematic calculations and preliminary FEA, • Prototype, test, and iterate mechanism designs for functionality and reliability, • Collaborate with electrical, avionics, flight controls, and propulsion teams, • Mentor junior engineers and promote engineering excellence, • Support pre-production builds, prototype integration, and ground/flight testingRequired qualifications:, • B.S. in Mechanical/Aerospace Engineering, • 8+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to othersPreferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with hydraulic and electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, MIL-STD-810, structural or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description- Experience on maintaining King Air 200/350/1900, Falcon 50/900/200 or Challenger 350 a plus. Responsible for servicing, troubleshooting, repairing and modifying aircraft systems to ensure continued airworthiness. These tasks are performed on avionics & electrical systems, engines, flight controls and airframe components. • Reads and interprets manufacturers maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components., • Ensure aircraft discrepancies are properly recorded in accordance with approved maintenance procedures. Know and understand the functions and requirements of computerized maintenance software. Maintain a clean and organized work place., • Perform other duties as assigned by Management, • Required to provide own hand tools., • Reports To: Shop Supervisor., • Possesses a valid FAA Aircraft & Powerplant (A&P) license and shows compliance with FAR 65.83, recent experience requirements, • Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining professional and non-confrontational attitude, • Experience & Education: High School degree or equivalent required., • Three to Five years experience on maintaining King Air 200/350/1900, Falcon 50/900/200 or Challenger 350 preferred., • Physical Requirements/Working Environment: Must possess a valid driver’s license. Be physically able to perform aircraft mechanic duties. Stand, squat, sit, walk, work with arms overhead for extended periods of time. Pull, push, lift up to 50 lbs. Job Type: Full-time Salary: $30.00 - $38.00 per hour (depends on experience) Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insuranceSchedule:, • 8 hour shift, • Day shift, • Monday to Friday, • OvertimeEducation:, • High school or equivalent (Preferred)

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Are you a passionate and innovative product design engineer looking to help develop state of the art AI and aircraft products? Are you eager to make a positive difference in the world? Do you want to work alongside mission driven and values focused teammates? Shield AI is just the place for you! As a Mechanical Engineer, you will be responsible for contributing to the mechanical design and development of Shield AI's autonomous UAV products. You will help architect new products, perform the detailed design of complex electro-mechanical assemblies, and will use best in class design and analysis tools. You will collaborate closely with internal and/or external partners to prototype, test and release products to production. You will also help ensure product features achieve performance, schedule and reliability goals. What you'll do: • Design complex electro-mechanical mechanisms for autonomous aircraft, • Own the full design process: concept, CAD, tolerance analysis, material selection, and drawing release, • Perform structural and kinematic calculations and preliminary FEA, • Prototype, test, and iterate mechanism designs for functionality and reliability, • Collaborate with electrical, avionics, flight controls, and propulsion teams, • Mentor junior engineers and promote engineering excellence, • Support pre-production builds, prototype integration, and ground/flight testingRequired qualifications:, • B.S. in Mechanical/Aerospace Engineering, • 8+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to othersPreferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, structural, or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Assemble and disassemble various components of aircraft during repairs and maintenance. Adjust, align and calibrate aircrafts using hand tools, gauges, etc. Perform oil changes, battery service, hydraulic system service and other aircraft servicing tasks Keep work area clean and safe.

Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic I (Electrician) The Aircraft Mechanic 1 (Electrician) is responsible for performing maintenance on various aircraf

You will troubleshoot and repair operational engines.You will record unacceptable equipment performance or conditions as directed.You will determine methods of repair, disassembly and serviceability.You will analyze problems such as fuel fluctuation, compressor instability or excessive vibration.You